# Copyright (C) 1987, 1988, 1990, 1991, 1992, 1993, 1994, 1995
# 1996, 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
-#This file is part of GNU CC.
+#This file is part of GCC.
-#GNU CC is free software; you can redistribute it and/or modify
+#GCC is free software; you can redistribute it and/or modify
#it under the terms of the GNU General Public License as published by
#the Free Software Foundation; either version 2, or (at your option)
#any later version.
-#GNU CC is distributed in the hope that it will be useful,
+#GCC is distributed in the hope that it will be useful,
#but WITHOUT ANY WARRANTY; without even the implied warranty of
#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
#GNU General Public License for more details.
#You should have received a copy of the GNU General Public License
-#along with GNU CC; see the file COPYING. If not, write to
+#along with GCC; see the file COPYING. If not, write to
#the Free Software Foundation, 59 Temple Place - Suite 330,
#Boston MA 02111-1307, USA.
CONFIG_LANGUAGES = @all_languages@
LANGUAGES = c gcov$(exeext) $(CONFIG_LANGUAGES)
-# Languages should create dependencies of $(INTL_TARGETS) on generated
-# sources in Make-lang.in. Example:
-# $(INTL_TARGETS): $(srcdir)/cp/parse.c
-INTL_TARGETS = intl.all intl.install
-
# Selection of languages to be made during stage1 build.
# This is overridden by configure.
BOOT_LANGUAGES = c @all_boot_languages@
MAKEINFOFLAGS =
TEXI2DVI = texi2dvi
TEXI2POD = perl $(srcdir)/../contrib/texi2pod.pl
-POD2MAN = pod2man --center="GNU" --release="gcc-$(version)" --section=1
+POD2MAN = pod2man --center="GNU" --release="gcc-$(version)"
# For GNUmake: let us decide what gets passed to recursive makes.
MAKEOVERRIDES =
@SET_MAKE@
# The GCC to use for compiling libgcc.a, enquire, and crt*.o.
# Usually the one we just built.
# Don't use this as a dependency--use $(GCC_PASSES) or $(GCC_PARTS).
-GCC_FOR_TARGET = ./xgcc -B./ -B$(build_tooldir)/bin/ -isystem $(build_tooldir)/include
+GCC_FOR_TARGET = ./xgcc -B./ -B$(build_tooldir)/bin/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include
# This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET.
# It omits XCFLAGS, and specifies -B./.
HASHTAB_H = $(srcdir)/../include/hashtab.h
OBSTACK_H = $(srcdir)/../include/obstack.h
SPLAY_TREE_H= $(srcdir)/../include/splay-tree.h
+FIBHEAP_H = $(srcdir)/../include/fibheap.h
# Default cross SYSTEM_HEADER_DIR, to be overridden by targets.
-CROSS_SYSTEM_HEADER_DIR = $(tooldir)/sys-include
+CROSS_SYSTEM_HEADER_DIR = $(build_tooldir)/sys-include
# Control whether to run fixproto and fixincludes.
STMP_FIXPROTO = stmp-fixproto
gcc_tooldir = @gcc_tooldir@
# Used to install the shared libgcc.
slibdir = @slibdir@
-# Since tooldir does not exist at build-time, use -B$(build_tooldir)/bin/
+# Since gcc_tooldir does not exist at build-time, use -B$(build_tooldir)/bin/
build_tooldir = $(exec_prefix)/$(target_alias)
# Directory in which the compiler finds target-independent g++ includes.
gcc_gxx_include_dir = @gcc_gxx_include_dir@
# Directory to search for site-specific includes.
-includedir = $(local_prefix)/include
+local_includedir = $(local_prefix)/include
+includedir = $(prefix)/include
# where the info files go
infodir = @infodir@
# Where cpp should go besides $prefix/bin if necessary
cpp_install_dir = @cpp_install_dir@
# where the locale files go
-datadir = $(prefix)/@DATADIRNAME@
+datadir = @datadir@
localedir = $(datadir)/locale
# Extension (if any) to put in installed man-page filename.
-manext = .1
+man1ext = .1
+man7ext = .7
objext = .o
exeext = @host_exeext@
build_exeext = @build_exeext@
# Directory in which to put man pages.
mandir = @mandir@
man1dir = $(mandir)/man1
+man7dir = $(mandir)/man7
# Dir for temp files.
tmpdir = /tmp
# Internationalization library.
INTLLIBS = @INTLLIBS@
+INTLDEPS = @INTLDEPS@
+
+# Character encoding conversion library.
+LIBICONV = @LIBICONV@
# List of internationalization subdirectories.
-POSUB = @POSUB@
-INTL_SUBDIRS = intl $(POSUB)
+INTL_SUBDIRS = intl
# Change this to a null string if obstacks are installed in the
# system library.
# Often this is edited directly by `configure'.
EXTRA_HEADERS =@extra_headers_list@
-# Set this to `collect2' to enable use of collect2.
-USE_COLLECT2 = @will_use_collect2@
-# If we might be using collect2, then this variable will be set to
-# -DUSE_COLLECT2. toplev.c, collect2.c and libgcc2.c all need to
-# know if we may be using collect2.
-MAYBE_USE_COLLECT2 = @maybe_use_collect2@
# It is convenient for configure to add the assignment at the beginning,
# so don't override it here.
USE_COLLECT2 = collect2$(exeext)
HOST_STRSTR=$(STRSTR)
# Actual name to use when installing a native compiler.
-GCC_INSTALL_NAME = `t='$(program_transform_name)'; echo gcc | sed -e $$t`
-CPP_INSTALL_NAME = `t='$(program_transform_name)'; echo cpp | sed -e $$t`
-PROTOIZE_INSTALL_NAME = `t='$(program_transform_name)'; echo protoize | sed -e $$t`
-UNPROTOIZE_INSTALL_NAME = `t='$(program_transform_name)'; echo unprotoize | sed -e $$t`
-GCOV_INSTALL_NAME = `t='$(program_transform_name)'; echo gcov | sed -e $$t`
-GCCBUG_INSTALL_NAME = `t='$(program_transform_name)'; echo gccbug | sed -e $$t`
+GCC_INSTALL_NAME = `echo gcc|sed '$(program_transform_name)'`
+GCC_TARGET_INSTALL_NAME = $(target_alias)-`echo gcc|sed '$(program_transform_name)'`
+CPP_INSTALL_NAME = `echo cpp|sed '$(program_transform_name)'`
+PROTOIZE_INSTALL_NAME = `echo protoize|sed '$(program_transform_name)'`
+UNPROTOIZE_INSTALL_NAME = `echo unprotoize|sed '$(program_transform_name)'`
+GCOV_INSTALL_NAME = `echo gcov|sed '$(program_transform_name)'`
+GCCBUG_INSTALL_NAME = `echo gccbug|sed '$(program_transform_name)'`
# Actual name to use when installing a cross-compiler.
-GCC_CROSS_NAME = `t='$(program_transform_cross_name)'; echo gcc | sed -e $$t`
-CPP_CROSS_NAME = `t='$(program_transform_cross_name)'; echo cpp | sed -e $$t`
-PROTOIZE_CROSS_NAME = `t='$(program_transform_cross_name)'; echo protoize | sed -e $$t`
-UNPROTOIZE_CROSS_NAME = `t='$(program_transform_cross_name)'; echo unprotoize | sed -e $$t`
+GCC_CROSS_NAME = `echo gcc|sed '$(program_transform_cross_name)'`
+CPP_CROSS_NAME = `echo cpp|sed '$(program_transform_cross_name)'`
+PROTOIZE_CROSS_NAME = `echo protoize|sed '$(program_transform_cross_name)'`
+UNPROTOIZE_CROSS_NAME = `echo unprotoize|sed '$(program_transform_cross_name)'`
# Choose the real default target.
ALL=all.internal
# GCONFIG_H lists the config files that the generator files depend on, while
# CONFIG_H lists the the ones ordinary gcc files depend on, which includes
-# a file generated by gencodes.
+# several files generated by those generators.
GCONFIG_H = config.h $(host_xm_file_list)
HCONFIG_H = hconfig.h $(build_xm_file_list)
-CONFIG_H = $(GCONFIG_H) insn-codes.h insn-flags.h
-TCONFIG_H = tconfig.h $(xm_file_list) insn-codes.h
+CONFIG_H = $(GCONFIG_H) insn-constants.h insn-flags.h
+TCONFIG_H = tconfig.h $(xm_file_list)
TARGET_H = target.h
TARGET_DEF_H = target-def.h
-TM_P_H = tm_p.h $(tm_p_file_list) insn-codes.h
+TM_P_H = tm_p.h $(tm_p_file_list) tm-preds.h
MACHMODE_H = machmode.h machmode.def
RTL_BASE_H = rtl.h rtl.def $(MACHMODE_H)
BASIC_BLOCK_H = basic-block.h bitmap.h sbitmap.h varray.h
DEMANGLE_H = $(srcdir)/../include/demangle.h
RECOG_H = recog.h
-EXPR_H = expr.h insn-codes.h
+EXPR_H = expr.h
+OPTABS_H = optabs.h insn-codes.h
REGS_H = regs.h varray.h $(MACHMODE_H)
INTEGRATE_H = integrate.h varray.h
LOOP_H = loop.h varray.h bitmap.h
C_TREE_H = c-tree.h $(C_COMMON_H)
SYSTEM_H = system.h hwint.h $(srcdir)/../include/libiberty.h
PREDICT_H = predict.h predict.def
+CPPLIB_H = cpplib.h line-map.h
# sed inserts variable overrides after the following line.
####target overrides
# Dependency on obstack or whatever library facilities
# are not installed in the system libraries.
# We don't use USE_* because backquote expansion doesn't work in deps.
-LIBDEPS= $(INTLLIBS) $(OBSTACK) $(VFPRINTF) $(DOPRINT) $(STRSTR)
+LIBDEPS= $(INTLDEPS) $(OBSTACK) $(VFPRINTF) $(DOPRINT) $(STRSTR)
# Likewise, for use in the tools that must run on this machine
# even if we are cross-building GCC.
"prefix=$(prefix)" \
"local_prefix=$(local_prefix)" \
"gxx_include_dir=$(gcc_gxx_include_dir)" \
- "tooldir=$(tooldir)" \
+ "build_tooldir=$(build_tooldir)" \
"gcc_tooldir=$(gcc_tooldir)" \
"bindir=$(bindir)" \
"libsubdir=$(libsubdir)" \
CXX_TARGET_OBJS=@cxx_target_objs@
# Language-specific object files for C and Objective C.
-C_AND_OBJC_OBJS = c-errors.o c-lex.o c-pragma.o c-decl.o c-typeck.o \
+C_AND_OBJC_OBJS = attribs.o c-errors.o c-lex.o c-pragma.o c-decl.o c-typeck.o \
c-convert.o c-aux-info.o c-common.o c-format.o c-semantics.o c-dump.o \
libcpp.a $(C_TARGET_OBJS)
# Language-independent object files.
-OBJS = \
- alias.o bb-reorder.o bitmap.o builtins.o caller-save.o calls.o \
- combine.o conflict.o convert.o cse.o cselib.o dbxout.o ssa-dce.o \
- dependence.o df.o diagnostic.o doloop.o dominance.o dwarf2asm.o \
- dwarf2out.o dwarfout.o emit-rtl.o except.o explow.o expmed.o expr.o \
- final.o flow.o fold-const.o function.o gcse.o genrtl.o ggc-common.o \
- global.o graph.o haifa-sched.o hash.o hashtable.o ifcvt.o \
- insn-attrtab.o insn-emit.o insn-extract.o insn-opinit.o insn-output.o \
- insn-peep.o insn-recog.o integrate.o intl.o jump.o lcm.o lists.o \
- local-alloc.o loop.o mbchar.o optabs.o params.o predict.o print-rtl.o \
- print-tree.o profile.o real.o recog.o reg-stack.o regclass.o regmove.o \
- regrename.o reload.o reload1.o reorg.o resource.o rtl.o rtlanal.o \
- sbitmap.o sched-deps.o sched-ebb.o sched-rgn.o sched-vis.o sdbout.o \
- sibcall.o simplify-rtx.o splay-tree.o ssa.o stmt.o stor-layout.o \
- stringpool.o timevar.o toplev.o tree.o unroll.o varasm.o varray.o \
- version.o xcoffout.o \
+OBJS = alias.o bb-reorder.o bitmap.o builtins.o caller-save.o calls.o \
+ cfg.o cfganal.o cfgbuild.o cfgcleanup.o cfgloop.o cfgrtl.o combine.o \
+ conflict.o convert.o cse.o cselib.o dbxout.o debug.o dependence.o df.o \
+ diagnostic.o doloop.o dominance.o dwarf2asm.o dwarf2out.o dwarfout.o \
+ emit-rtl.o except.o explow.o expmed.o expr.o final.o flow.o \
+ fold-const.o function.o gcse.o genrtl.o ggc-common.o global.o graph.o \
+ haifa-sched.o hash.o hashtable.o ifcvt.o insn-attrtab.o insn-emit.o \
+ insn-extract.o insn-opinit.o insn-output.o insn-peep.o insn-recog.o \
+ integrate.o intl.o jump.o langhooks.o lcm.o lists.o local-alloc.o \
+ loop.o mbchar.o optabs.o params.o predict.o print-rtl.o print-tree.o \
+ profile.o real.o recog.o reg-stack.o regclass.o regmove.o regrename.o \
+ reload.o reload1.o reorg.o resource.o rtl.o rtlanal.o rtl-error.o \
+ sbitmap.o sched-deps.o sched-ebb.o sched-rgn.o sched-vis.o sdbout.o \
+ sibcall.o simplify-rtx.o splay-tree.o ssa.o ssa-ccp.o ssa-dce.o stmt.o \
+ stor-layout.o stringpool.o timevar.o toplev.o tree.o tree-inline.o \
+ unroll.o varasm.o varray.o version.o xcoffout.o cfglayout.o \
$(GGC) $(out_object_file) $(EXTRA_OBJS)
BACKEND = main.o libbackend.a
GEN= genemit$(build_exeext) genoutput$(build_exeext) genrecog$(build_exeext) \
genextract$(build_exeext) genflags$(build_exeext) gencodes$(build_exeext) \
genconfig$(build_exeext) genpeep$(build_exeext) gengenrtl$(build_exeext) \
- gencheck$(build_exeext)
+ gencheck$(build_exeext) genpreds$(build_exeext) genconstants$(build_exeext)
# Files to be copied away after each stage in building.
STAGESTUFF = *$(objext) insn-flags.h insn-config.h insn-codes.h \
insn-output.c insn-recog.c insn-emit.c insn-extract.c insn-peep.c \
- insn-attr.h insn-attrtab.c insn-opinit.c tree-check.h \
+ insn-attr.h insn-attrtab.c insn-opinit.c insn-constants.h tm-preds.h \
+ tree-check.h \
s-flags s-config s-codes s-mlib s-under s-genrtl \
s-output s-recog s-emit s-extract s-peep s-check \
- s-attr s-attrtab s-opinit s-crt0 \
+ s-attr s-attrtab s-opinit s-preds s-constants s-crt0 \
genemit$(build_exeext) genoutput$(build_exeext) genrecog$(build_exeext) \
genextract$(build_exeext) genflags$(build_exeext) gencodes$(build_exeext) \
genconfig$(build_exeext) genpeep$(build_exeext) genattrtab$(build_exeext) \
genattr$(build_exeext) genopinit$(build_exeext) gengenrtl$(build_exeext) \
- gencheck$(build_exeext) genrtl.c genrtl.h \
+ gencheck$(build_exeext) genpreds$(build_exeext) genconstants$(build_exeext) \
+ genrtl.c genrtl.h \
xgcc$(exeext) cpp$(exeext) cc1$(exeext) cpp0$(exeext) $(EXTRA_PASSES) \
$(EXTRA_PARTS) $(EXTRA_PROGRAMS) gcc-cross$(exeext) cc1obj$(exeext) \
enquire$(exeext) protoize$(exeext) unprotoize$(exeext) \
_mulvsi3 _mulvdi3 _negvsi2 _negvdi2 _ctors
# Defined in libgcc2.c, included only in the static library.
-LIB2FUNCS_ST = _eprintf _bb __gcc_bcmp
+LIB2FUNCS_ST = _eprintf _bb __gcc_bcmp
FPBIT_FUNCS = _pack_sf _unpack_sf _addsub_sf _mul_sf _div_sf \
_fpcmp_parts_sf _compare_sf _eq_sf _ne_sf _gt_sf _ge_sf \
#\f
# The only suffixes we want for implicit rules are .c and .o, so clear
# the list and add them. This speeds up GNU Make, and allows -r to work.
+# For i18n support, we also need .gmo, .po, .pox.
.SUFFIXES:
-.SUFFIXES: .c .o
+.SUFFIXES: .c .o .po .pox .gmo
Makefile: $(srcdir)/Makefile.in config.status $(srcdir)/version.c \
$(xmake_file) $(tmake_file) $(LANG_MAKEFILES)
HEADERS="$(tm_p_file)" DEFINES="" TARGET_CPU_DEFAULT="" \
$(SHELL) $(srcdir)/mkconfig.sh tm_p.h
-$(srcdir)/configure: $(srcdir)/configure.in
+# Don't automatically run autoconf, since configure.in might be accidentally
+# newer than configure. Also, this writes into the source directory which
+# might be on a read-only file system. If configured for maintainer mode
+# then do allow autoconf to be run.
+
+$(srcdir)/configure: @MAINT@ $(srcdir)/configure.in
(cd $(srcdir) && autoconf)
gccbug: $(srcdir)/gccbug.in
# "echo timestamp" is used instead of touch to be consistent with other
# packages that use autoconf (??? perhaps also to avoid problems with patch?).
# ??? Newer versions have a maintainer mode that may be useful here.
-$(srcdir)/config.in: $(srcdir)/cstamp-h.in
-$(srcdir)/cstamp-h.in: $(srcdir)/configure.in $(srcdir)/acconfig.h
- (cd $(srcdir) && autoheader)
- @rm -f $(srcdir)/cstamp-h.in
- echo timestamp > $(srcdir)/cstamp-h.in
+
+# Don't run autoheader automatically either.
+# Only run it if maintainer mode is enabled.
+@MAINT@ $(srcdir)/config.in: $(srcdir)/cstamp-h.in
+@MAINT@ $(srcdir)/cstamp-h.in: $(srcdir)/configure.in $(srcdir)/acconfig.h
+@MAINT@ (cd $(srcdir) && autoheader)
+@MAINT@ @rm -f $(srcdir)/cstamp-h.in
+@MAINT@ echo timestamp > $(srcdir)/cstamp-h.in
auto-host.h: cstamp-h ; @true
cstamp-h: config.in config.status
CONFIG_HEADERS=auto-host.h:config.in LANGUAGES="$(CONFIG_LANGUAGES)" $(SHELL) config.status
rest.encap: $(STMP_FIXPROTO) $(LIBGCC) $(EXTRA_PARTS) lang.rest.encap
# This is what is made with the host's compiler
# whether making a cross compiler or not.
-native: config.status auto-host.h intl.all $(LANGUAGES) \
+native: config.status auto-host.h intl.all build-@POSUB@ $(LANGUAGES) \
$(EXTRA_PASSES) $(EXTRA_PROGRAMS) $(USE_COLLECT2)
# Define the names for selecting languages in LANGUAGES.
SHLIB_MKMAP='$(SHLIB_MKMAP)' \
SHLIB_MAPFILES='$(SHLIB_MAPFILES)' \
SHLIB_NM_FLAGS='$(SHLIB_NM_FLAGS)' \
+ mkinstalldirs='$(SHELL) $(srcdir)/mkinstalldirs' \
$(SHELL) mklibgcc > tmp-libgcc.mk
mv tmp-libgcc.mk libgcc.mk
RANLIB_TEST_FOR_TARGET="$(RANLIB_TEST_FOR_TARGET)" \
NM_FOR_TARGET="$(NM_FOR_TARGET)" AWK="$(AWK)" \
LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" \
- INCLUDES="$(INCLUDES)" MAYBE_USE_COLLECT2="$(MAYBE_USE_COLLECT2)" \
+ INCLUDES="$(INCLUDES)" \
CONFIG_H="$(TCONFIG_H)" MACHMODE_H="$(MACHMODE_H)" \
LIB1ASMSRC='$(LIB1ASMSRC)' \
MAKEOVERRIDES= \
RANLIB_TEST_FOR_TARGET="$(RANLIB_TEST_FOR_TARGET)" \
NM_FOR_TARGET="$(NM_FOR_TARGET)" AWK="$(AWK)" \
LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" \
- INCLUDES="$(INCLUDES)" MAYBE_USE_COLLECT2="$(MAYBE_USE_COLLECT2)" \
+ INCLUDES="$(INCLUDES)" \
CONFIG_H="$(CONFIG_H)" MACHMODE_H="$(MACHMODE_H)" \
LIB1ASMSRC='$(LIB1ASMSRC)' \
MAKEOVERRIDES= \
c-errors.o: c-errors.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(C_TREE_H) flags.h \
diagnostic.h $(TM_P_H)
c-parse.o : $(srcdir)/c-parse.c $(CONFIG_H) $(TREE_H) c-lex.h $(GGC_H) intl.h \
- $(C_TREE_H) input.h flags.h $(SYSTEM_H) toplev.h output.h cpplib.h \
+ $(C_TREE_H) input.h flags.h $(SYSTEM_H) toplev.h output.h $(CPPLIB_H) \
diagnostic.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c $(srcdir)/c-parse.c
c-decl.o : c-decl.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(RTL_H) $(C_TREE_H) \
$(GGC_H) $(TARGET_H) c-lex.h flags.h function.h output.h $(EXPR_H) \
- toplev.h intl.h $(TM_P_H)
+ debug.h toplev.h intl.h $(TM_P_H) tree-inline.h $(TIMEVAR_H)
c-typeck.o : c-typeck.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(C_TREE_H) \
$(TARGET_H) flags.h intl.h output.h $(EXPR_H) $(RTL_H) toplev.h $(TM_P_H)
c-lang.o : c-lang.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(C_TREE_H) \
- $(GGC_H) c-lex.h toplev.h diagnostic.h output.h function.h \
- $(RTL_H) $(EXPR_H)
-c-lex.o : c-lex.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(RTL_H) c-lex.h $(C_TREE_H) \
+ $(GGC_H) c-lex.h toplev.h diagnostic.h output.h function.h $(VARRAY_H) \
+ $(RTL_H) $(EXPR_H) tree-inline.h insn-config.h integrate.h langhooks.h \
+ langhooks-def.h
+c-lex.o : c-lex.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(RTL_H) c-lex.h \
+ debug.h $(C_TREE_H) \
c-pragma.h input.h intl.h flags.h toplev.h output.h \
- mbchar.h cpplib.h $(EXPR_H) $(TM_P_H)
+ mbchar.h $(CPPLIB_H) $(EXPR_H) $(TM_P_H)
c-aux-info.o : c-aux-info.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(C_TREE_H) \
flags.h toplev.h
c-convert.o : c-convert.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) flags.h toplev.h
c-pragma.o: c-pragma.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) function.h \
- c-pragma.h toplev.h $(GGC_H) $(TM_P_H)
+ c-pragma.h toplev.h output.h $(GGC_H) $(TM_P_H)
mbchar.o: mbchar.c $(CONFIG_H) $(SYSTEM_H) mbchar.h
graph.o: graph.c $(CONFIG_H) $(SYSTEM_H) toplev.h flags.h output.h $(RTL_H) \
function.h hard-reg-set.h $(BASIC_BLOCK_H) graph.h
COLLECT2_LIBS = @COLLECT2_LIBS@
collect2$(exeext): $(COLLECT2_OBJS) $(LIBDEPS)
# Don't try modifying collect2 (aka ld) in place--it might be linking this.
- $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@T \
+ $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o T$@ \
$(COLLECT2_OBJS) $(LIBS) $(COLLECT2_LIBS)
- mv -f $@T $@
+ mv -f T$@ $@
collect2.o : collect2.c $(CONFIG_H) $(SYSTEM_H) gstab.h intl.h \
$(OBSTACK_H) $(DEMANGLE_H) collect2.h version.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
- -DTARGET_MACHINE=\"$(target_alias)\" $(MAYBE_USE_COLLECT2) \
+ -DTARGET_MACHINE=\"$(target_alias)\" \
-c $(srcdir)/collect2.c
tlink.o: tlink.c $(DEMANGLE_H) hash.h $(CONFIG_H) $(SYSTEM_H) collect2.h intl.h
c-common.o : c-common.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(OBSTACK_H) \
$(C_COMMON_H) flags.h toplev.h output.h c-pragma.h $(RTL_H) $(GGC_H) \
- $(EXPR_H) $(TM_P_H) builtin-types.def $(TARGET_H)
+ $(EXPR_H) $(TM_P_H) builtin-types.def builtin-attrs.def $(TARGET_H)
+
+# A file used by all variants of C and some other languages.
+
+attribs.o : attribs.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(OBSTACK_H) flags.h \
+ toplev.h output.h c-pragma.h $(RTL_H) $(GGC_H) $(EXPR_H) $(TM_P_H) \
+ builtin-types.def $(TARGET_H)
c-format.o : c-format.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) \
$(C_COMMON_H) flags.h toplev.h intl.h diagnostic.h
version.o: version.c version.h
ggc-common.o: ggc-common.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) \
- flags.h $(GGC_H) varray.h hash.h $(TM_P_H)
+ flags.h $(GGC_H) varray.h hash.h $(HASHTAB_H) $(TM_P_H)
ggc-simple.o: ggc-simple.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h \
$(GGC_H) varray.h $(TIMEVAR_H) $(TM_P_H)
hashtable.o: hashtable.c hashtable.h $(CONFIG_H) $(SYSTEM_H) $(OBSTACK_H)
+line-map.o: line-map.c line-map.h intl.h $(CONFIG_H) $(SYSTEM_H)
+
ggc-none.o: ggc-none.c $(GCONFIG_H) $(SYSTEM_H) $(GGC_H)
$(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION)
convert.o: convert.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) flags.h convert.h toplev.h
+langhooks.o : langhooks.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) toplev.h \
+ tree-inline.h $(RTL_H) insn-config.h integrate.h langhooks.h langhooks-def.h
tree.o : tree.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) flags.h function.h toplev.h \
- $(GGC_H) $(HASHTAB_H) $(TARGET_H) output.h $(TM_P_H)
-print-tree.o : print-tree.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(GGC_H)
+ $(GGC_H) $(HASHTAB_H) $(TARGET_H) output.h $(TM_P_H) langhooks.h
+tree-inline.o : tree-inline.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(RTL_H) \
+ expr.h flags.h params.h input.h insn-config.h $(INTEGRATE_H) \
+ $(VARRAY_H) $(HASHTAB_H) $(SPLAY_TREE_H) toplev.h langhooks.h \
+ $(C_COMMON_H) tree-inline.h
+print-tree.o : print-tree.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(GGC_H) \
+ langhooks.h
stor-layout.o : stor-layout.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) flags.h \
function.h $(EXPR_H) $(RTL_H) toplev.h $(GGC_H) $(TM_P_H)
-fold-const.o : fold-const.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) flags.h toplev.h \
- $(EXPR_H) $(RTL_H) $(GGC_H) $(TM_P_H)
-diagnostic.o : diagnostic.c diagnostic.h diagnostic.def \
- $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(RTL_H) $(TM_P_H) flags.h \
- $(GGC_H) input.h $(INSN_ATTR_H) insn-config.h toplev.h intl.h
+fold-const.o : fold-const.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) flags.h \
+ toplev.h $(HASHTAB_H) $(EXPR_H) $(RTL_H) $(GGC_H) $(TM_P_H)
+diagnostic.o : diagnostic.c diagnostic.h real.h diagnostic.def \
+ $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(TM_P_H) flags.h $(GGC_H) \
+ input.h toplev.h intl.h
toplev.o : toplev.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(RTL_H) function.h \
- flags.h input.h $(INSN_ATTR_H) xcoffout.h output.h diagnostic.h \
- insn-config.h intl.h $(RECOG_H) Makefile toplev.h dwarfout.h \
+ flags.h xcoffout.h input.h $(INSN_ATTR_H) output.h diagnostic.h \
+ debug.h insn-config.h intl.h $(RECOG_H) Makefile toplev.h \
dwarf2out.h sdbout.h dbxout.h $(EXPR_H) hard-reg-set.h $(BASIC_BLOCK_H) \
graph.h $(LOOP_H) except.h $(REGS_H) $(TIMEVAR_H) $(lang_options_files) \
- ssa.h $(PARAMS_H) $(TM_P_H) reload.h dwarf2asm.h
- $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(MAYBE_USE_COLLECT2) \
+ ssa.h $(PARAMS_H) $(TM_P_H) reload.h dwarf2asm.h $(TARGET_H) halfpic.h \
+ langhooks.h
+ $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
-DTARGET_NAME=\"$(target_alias)\" \
-c $(srcdir)/toplev.c
-main.o : main.c toplev.h
+main.o : main.c $(CONFIG_H) $(SYSTEM_H) toplev.h
+
+rtl-error.o: rtl-error.c system.h $(RTL_H) $(INSN_ATTR_H) insn-config.h \
+ input.h toplev.h intl.h diagnostic.h $(CONFIG_H)
rtl.o : rtl.c $(GCONFIG_H) $(SYSTEM_H) $(RTL_H) real.h $(GGC_H) errors.h
$(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION)
-print-rtl.o : print-rtl.c $(GCONFIG_H) $(SYSTEM_H) $(RTL_H) hard-reg-set.h \
- $(BASIC_BLOCK_H)
+print-rtl.o : print-rtl.c $(GCONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) \
+ hard-reg-set.h $(BASIC_BLOCK_H)
$(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION)
-rtlanal.o : rtlanal.c $(CONFIG_H) $(SYSTEM_H) toplev.h $(RTL_H) hard-reg-set.h
+rtlanal.o : rtlanal.c $(CONFIG_H) $(SYSTEM_H) toplev.h $(RTL_H) hard-reg-set.h $(TM_P_H)
errors.o : errors.c $(GCONFIG_H) $(SYSTEM_H) errors.h
$(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION)
varasm.o : varasm.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(RTL_H) flags.h \
- function.h $(EXPR_H) hard-reg-set.h $(REGS_H) \
- xcoffout.h output.h c-pragma.h toplev.h dbxout.h sdbout.h $(GGC_H) $(TM_P_H)
+ function.h $(EXPR_H) hard-reg-set.h $(REGS_H) $(OBSTACK_H) \
+ output.h c-pragma.h toplev.h xcoffout.h debug.h $(GGC_H) $(TM_P_H) \
+ $(HASHTAB_H) $(TARGET_H)
function.o : function.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h \
- function.h $(EXPR_H) $(REGS_H) hard-reg-set.h \
+ function.h $(EXPR_H) libfuncs.h $(REGS_H) hard-reg-set.h \
insn-config.h $(RECOG_H) output.h toplev.h except.h hash.h $(GGC_H) $(TM_P_H)
stmt.o : stmt.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h function.h \
- insn-config.h hard-reg-set.h $(EXPR_H) except.h \
+ insn-config.h hard-reg-set.h $(EXPR_H) libfuncs.h except.h \
$(LOOP_H) $(RECOG_H) toplev.h output.h varray.h $(GGC_H) $(TM_P_H)
except.o : except.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h \
- except.h function.h $(EXPR_H) integrate.h \
+ except.h function.h $(EXPR_H) libfuncs.h integrate.h \
insn-config.h hard-reg-set.h $(BASIC_BLOCK_H) output.h \
dwarf2asm.h dwarf2out.h toplev.h $(HASHTAB_H) intl.h $(GGC_H)
expr.o : expr.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h function.h \
- $(REGS_H) $(EXPR_H) insn-config.h $(RECOG_H) \
- output.h typeclass.h hard-reg-set.h toplev.h hard-reg-set.h except.h \
- reload.h $(GGC_H) intl.h $(TM_P_H)
+ $(REGS_H) $(EXPR_H) $(OPTABS_H) libfuncs.h insn-attr.h insn-config.h \
+ $(RECOG_H) output.h typeclass.h hard-reg-set.h toplev.h hard-reg-set.h \
+ except.h reload.h $(GGC_H) intl.h $(TM_P_H)
builtins.o : builtins.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h \
- function.h $(REGS_H) $(EXPR_H) insn-config.h \
+ $(TARGET_H) function.h $(REGS_H) $(EXPR_H) $(OPTABS_H) insn-config.h \
$(RECOG_H) output.h typeclass.h hard-reg-set.h toplev.h hard-reg-set.h \
- except.h $(TM_P_H) $(PREDICT_H)
+ except.h $(TM_P_H) $(PREDICT_H) libfuncs.h
calls.o : calls.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h $(EXPR_H) \
- $(REGS_H) toplev.h output.h function.h $(TIMEVAR_H) $(TM_P_H)
+ libfuncs.h $(REGS_H) toplev.h output.h function.h $(TIMEVAR_H) $(TM_P_H)
expmed.o : expmed.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h \
- insn-config.h $(EXPR_H) $(RECOG_H) real.h \
+ insn-config.h $(EXPR_H) $(OPTABS_H) $(RECOG_H) real.h \
toplev.h $(TM_P_H)
explow.o : explow.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h \
- hard-reg-set.h insn-config.h $(EXPR_H) $(RECOG_H) \
- toplev.h function.h $(TM_P_H)
+ hard-reg-set.h insn-config.h $(EXPR_H) $(OPTABS_H) $(RECOG_H) \
+ toplev.h function.h ggc.h $(TM_P_H)
optabs.o : optabs.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h \
- insn-config.h $(EXPR_H) $(RECOG_H) reload.h \
+ insn-config.h $(EXPR_H) $(OPTABS_H) libfuncs.h $(RECOG_H) reload.h \
toplev.h $(GGC_H) real.h $(TM_P_H) except.h
-dbxout.o : dbxout.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(RTL_H) flags.h $(REGS_H) \
- insn-config.h reload.h gstab.h xcoffout.h output.h dbxout.h toplev.h \
- $(TM_P_H)
-sdbout.o : sdbout.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(RTL_H) flags.h except.h \
+dbxout.o : dbxout.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(RTL_H) flags.h \
+ $(REGS_H) debug.h $(TM_P_H) $(TARGET_H) function.h langhooks.h \
+ insn-config.h reload.h gstab.h xcoffout.h output.h dbxout.h toplev.h
+debug.o : debug.c $(CONFIG_H) $(SYSTEM_H)
+sdbout.o : sdbout.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(RTL_H) flags.h \
function.h $(EXPR_H) output.h hard-reg-set.h $(REGS_H) real.h \
insn-config.h $(OBSTACK_H) xcoffout.h c-pragma.h ggc.h \
- sdbout.h toplev.h $(TM_P_H)
+ sdbout.h toplev.h $(TM_P_H) except.h debug.h
dwarfout.o : dwarfout.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(RTL_H) dwarf.h \
- flags.h insn-config.h reload.h output.h toplev.h dwarfout.h $(TM_P_H)
+ flags.h insn-config.h reload.h output.h toplev.h $(TM_P_H) \
+ debug.h langhooks.h
dwarf2out.o : dwarf2out.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(RTL_H) dwarf2.h \
- flags.h insn-config.h reload.h output.h diagnostic.h \
- hard-reg-set.h $(REGS_H) $(EXPR_H) toplev.h dwarf2out.h varray.h \
- $(GGC_H) except.h dwarf2asm.h $(TM_P_H)
+ debug.h flags.h insn-config.h reload.h output.h diagnostic.h \
+ hard-reg-set.h $(REGS_H) $(EXPR_H) libfuncs.h toplev.h dwarf2out.h varray.h \
+ $(GGC_H) except.h dwarf2asm.h $(TM_P_H) langhooks.h
dwarf2asm.o : dwarf2asm.c $(CONFIG_H) $(SYSTEM_H) flags.h $(RTL_H) $(TREE_H) \
output.h dwarf2asm.h $(TM_P_H)
xcoffout.o : xcoffout.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(RTL_H) xcoffout.h \
emit-rtl.o : emit-rtl.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h \
function.h $(REGS_H) insn-config.h $(RECOG_H) real.h $(GGC_H) \
$(EXPR_H) $(srcdir)/../include/obstack.h hard-reg-set.h bitmap.h toplev.h \
- $(HASHTAB_H) $(TM_P_H)
+ $(HASHTAB_H) $(TM_P_H) debug.h langhooks.h
real.o : real.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) toplev.h $(TM_P_H)
integrate.o : integrate.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h \
- $(INTEGRATE_H) insn-config.h $(EXPR_H) real.h $(REGS_H) \
+ debug.h $(INTEGRATE_H) insn-config.h $(EXPR_H) real.h $(REGS_H) \
intl.h function.h output.h $(RECOG_H) except.h toplev.h $(LOOP_H) \
- $(PARAMS_H) $(TM_P_H)
+ $(PARAMS_H) $(TM_P_H) $(TARGET_H)
jump.o : jump.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) flags.h hard-reg-set.h $(REGS_H) \
insn-config.h $(RECOG_H) $(EXPR_H) real.h except.h function.h \
toplev.h $(INSN_ATTR_H) $(TM_P_H) reload.h $(PREDICT_H)
ssa.o : ssa.c $(CONFIG_H) $(SYSTEM_H) $(REGS_H) varray.h $(EXPR_H) \
hard-reg-set.h flags.h function.h real.h insn-config.h $(RECOG_H) \
$(BASIC_BLOCK_H) output.h ssa.h
-ssa-dce.o : ssa-dce.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) hard-reg-set.h $(BASIC_BLOCK_H) \
- ssa.h insn-config.h $(RECOG_H) output.h
+ssa-dce.o : ssa-dce.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) hard-reg-set.h \
+ $(BASIC_BLOCK_H) ssa.h insn-config.h $(RECOG_H) output.h
+ssa-ccp.o : ssa-ccp.c $(CONFIG_H) system.h $(RTL_H) hard-reg-set.h \
+ $(BASIC_BLOCK_H) ssa.h insn-config.h $(RECOG_H) output.h \
+ errors.h $(GGC_H) df.h function.h
df.o : df.c $(CONFIG_H) system.h $(RTL_H) insn-config.h $(RECOG_H) \
- function.h $(REGS_H) $(OBSTACK_H) hard-reg-set.h $(BASIC_BLOCK_H) df.h
+ function.h $(REGS_H) $(OBSTACK_H) hard-reg-set.h $(BASIC_BLOCK_H) df.h \
+ $(FIBHEAP_H)
conflict.o : conflict.c $(CONFIG_H) $(SYSTEM_H) $(OBSTACK_H) $(HASHTAB_H) \
$(RTL_H) hard-reg-set.h $(BASIC_BLOCK_H)
profile.o : profile.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h \
insn-config.h output.h $(REGS_H) $(EXPR_H) function.h \
- gcov-io.h toplev.h $(GGC_H) hard-reg-set.h $(BASIC_BLOCK_H)
-loop.o : loop.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) flags.h $(LOOP_H) insn-config.h \
- $(REGS_H) hard-reg-set.h $(RECOG_H) $(EXPR_H) real.h $(PREDICT_H) \
- $(BASIC_BLOCK_H) function.h toplev.h varray.h except.h cselib.h $(TM_P_H)
+ gcov-io.h toplev.h $(GGC_H) hard-reg-set.h $(BASIC_BLOCK_H) $(TARGET_H)
+loop.o : loop.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) flags.h $(LOOP_H) \
+ insn-config.h $(REGS_H) hard-reg-set.h $(RECOG_H) $(EXPR_H) \
+ real.h $(PREDICT_H) $(BASIC_BLOCK_H) function.h \
+ toplev.h varray.h except.h cselib.h $(TM_P_H)
doloop.o : doloop.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) flags.h $(LOOP_H) \
$(EXPR_H) hard-reg-set.h $(BASIC_BLOCK_H) $(TM_P_H) toplev.h
unroll.o : unroll.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) insn-config.h function.h \
flow.o : flow.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h insn-config.h \
$(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h toplev.h $(RECOG_H) \
function.h except.h $(EXPR_H) ssa.h $(GGC_H) $(TM_P_H)
+cfg.o : cfg.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) flags.h insn-config.h \
+ $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h toplev.h $(RECOG_H) \
+ function.h except.h $(GGC_H) $(TM_P_H)
+cfgrtl.o : cfgrtl.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) flags.h insn-config.h \
+ $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h toplev.h $(RECOG_H) \
+ function.h except.h $(GGC_H) $(TM_P_H)
+cfganal.o : cfganal.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) \
+ $(BASIC_BLOCK_H) hard-reg-set.h $(GGC_H)
+cfgbuild.o : cfgbuild.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) flags.h insn-config.h \
+ $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h toplev.h $(RECOG_H) \
+ function.h except.h $(GGC_H)
+cfgcleanup.o : cfgcleanup.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TIMEVAR_H)\
+ $(BASIC_BLOCK_H) hard-reg-set.h output.h flags.h $(RECOG_H) toplev.h \
+ $(GGC_H) insn-config.h
+cfgloop.o : cfgloop.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) \
+ $(BASIC_BLOCK_H) hard-reg-set.h
dominance.o : dominance.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) hard-reg-set.h \
$(BASIC_BLOCK_H)
combine.o : combine.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) flags.h function.h \
toplev.h function.h output.h $(GGC_H) $(TM_P_H) $(EXPR_H)
local-alloc.o : local-alloc.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) flags.h \
$(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h insn-config.h $(RECOG_H) \
- output.h function.h $(INSN_ATTR_H) toplev.h $(TM_P_H)
+ output.h function.h $(INSN_ATTR_H) toplev.h except.h $(TM_P_H)
bitmap.o : bitmap.c $(GCONFIG_H) $(SYSTEM_H) $(RTL_H) flags.h $(BASIC_BLOCK_H) \
$(REGS_H)
$(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION)
global.o : global.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) flags.h reload.h function.h \
$(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h insn-config.h output.h toplev.h \
$(TM_P_H)
-varray.o : varray.c $(CONFIG_H) $(SYSTEM_H) varray.h $(RTL_H) $(TREE_H) bitmap.h
-reload.o : reload.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) flags.h output.h $(EXPR_H) \
- reload.h $(RECOG_H) hard-reg-set.h insn-config.h $(REGS_H) \
- function.h real.h toplev.h $(TM_P_H)
-reload1.o : reload1.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) real.h flags.h $(EXPR_H) \
- reload.h $(REGS_H) hard-reg-set.h insn-config.h \
- $(BASIC_BLOCK_H) $(RECOG_H) output.h function.h toplev.h cselib.h $(TM_P_H)
+varray.o : varray.c $(CONFIG_H) $(SYSTEM_H) varray.h $(RTL_H) $(TREE_H) bitmap.h \
+ errors.h
+reload.o : reload.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) flags.h output.h \
+ $(EXPR_H) $(OPTABS_H) reload.h $(RECOG_H) hard-reg-set.h insn-config.h \
+ $(REGS_H) function.h real.h toplev.h $(TM_P_H)
+reload1.o : reload1.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) real.h flags.h \
+ $(EXPR_H) $(OPTABS_H) reload.h $(REGS_H) hard-reg-set.h insn-config.h \
+ $(BASIC_BLOCK_H) $(RECOG_H) output.h function.h toplev.h cselib.h $(TM_P_H) \
+ except.h
caller-save.o : caller-save.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) flags.h \
$(REGS_H) hard-reg-set.h insn-config.h $(BASIC_BLOCK_H) function.h \
$(RECOG_H) reload.h $(EXPR_H) toplev.h $(TM_P_H)
reorg.o : reorg.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) conditions.h hard-reg-set.h \
- $(BASIC_BLOCK_H) $(REGS_H) insn-config.h $(INSN_ATTR_H) \
+ $(BASIC_BLOCK_H) $(REGS_H) insn-config.h $(INSN_ATTR_H) except.h \
$(RECOG_H) function.h flags.h output.h $(EXPR_H) toplev.h $(PARAMS_H) $(TM_P_H)
alias.o : alias.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) flags.h hard-reg-set.h \
$(BASIC_BLOCK_H) $(REGS_H) toplev.h output.h $(EXPR_H) \
- $(GGC_H) function.h cselib.h $(TREE_H) $(TM_P_H)
+ $(GGC_H) function.h cselib.h $(TREE_H) $(TM_P_H) langhooks.h
regmove.o : regmove.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) insn-config.h \
$(RECOG_H) output.h $(REGS_H) hard-reg-set.h flags.h function.h \
$(EXPR_H) $(BASIC_BLOCK_H) toplev.h $(TM_P_H) except.h reload.h
haifa-sched.o : haifa-sched.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) sched-int.h \
$(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h flags.h insn-config.h function.h \
- $(INSN_ATTR_H) toplev.h $(RECOG_H) except.h $(TM_P_H)
+ $(INSN_ATTR_H) toplev.h $(RECOG_H) except.h $(TM_P_H) $(TARGET_H)
sched-deps.o : sched-deps.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) sched-int.h \
$(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h flags.h insn-config.h function.h \
- $(INSN_ATTR_H) toplev.h $(RECOG_H) except.h $(TM_P_H)
+ $(INSN_ATTR_H) toplev.h $(RECOG_H) except.h cselib.h $(PARAMS_H) $(TM_P_H)
sched-rgn.o : sched-rgn.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) sched-int.h \
$(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h flags.h insn-config.h function.h \
$(INSN_ATTR_H) toplev.h $(RECOG_H) except.h $(TM_P_H)
hard-reg-set.h $(BASIC_BLOCK_H) $(INSN_ATTR_H) $(REGS_H) $(TM_P_H)
final.o : final.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h intl.h \
$(REGS_H) $(RECOG_H) conditions.h insn-config.h $(INSN_ATTR_H) function.h \
- real.h output.h hard-reg-set.h except.h \
- xcoffout.h toplev.h reload.h dwarfout.h dwarf2out.h sdbout.h \
- dbxout.h $(BASIC_BLOCK_H) $(TM_P_H) $(TARGET_H)
+ real.h output.h hard-reg-set.h except.h debug.h xcoffout.h \
+ toplev.h reload.h dwarf2out.h $(BASIC_BLOCK_H) $(TM_P_H) $(TARGET_H)
recog.o : recog.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) function.h $(BASIC_BLOCK_H) \
$(REGS_H) $(RECOG_H) $(EXPR_H) hard-reg-set.h flags.h insn-config.h \
$(INSN_ATTR_H) real.h toplev.h output.h reload.h $(TM_P_H)
$(RECOG_H) function.h except.h $(EXPR_H) $(TM_P_H) $(PREDICT_H)
lists.o: lists.c $(CONFIG_H) $(SYSTEM_H) toplev.h $(RTL_H) $(GGC_H)
bb-reorder.o : bb-reorder.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h \
- insn-config.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h toplev.h \
- $(RECOG_H) function.h except.h $(EXPR_H) $(TM_P_H)
+ $(BASIC_BLOCK_H) hard-reg-set.h output.h cfglayout.h
+cfglayout.o : cfglayout.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) \
+ insn-config.h $(BASIC_BLOCK_H) hard-reg-set.h output.h function.h \
+ cfglayout.h
timevar.o : timevar.c $(CONFIG_H) $(SYSTEM_H) $(TIMEVAR_H) flags.h intl.h
regrename.o : regrename.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) insn-config.h \
$(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h $(RECOG_H) function.h \
$(out_object_file): $(out_file) $(CONFIG_H) $(TREE_H) $(GGC_H) \
$(RTL_H) $(REGS_H) hard-reg-set.h real.h insn-config.h conditions.h \
- output.h $(INSN_ATTR_H) $(SYSTEM_H) toplev.h $(TARGET_H) \
- $(TARGET_DEF_H) function.h sched-int.h $(TM_P_H)
+ output.h $(INSN_ATTR_H) $(SYSTEM_H) toplev.h $(TARGET_H) libfuncs.h \
+ $(TARGET_DEF_H) function.h sched-int.h $(TM_P_H) $(EXPR_H) $(OPTABS_H) \
+ langhooks.h
$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
$(out_file) $(OUTPUT_OPTION)
mips-tdump.o : mips-tdump.c $(CONFIG_H) $(RTL_H) $(SYSTEM_H)
# Build file to support OSF/rose half-pic format.
-halfpic.o: halfpic.c $(CONFIG_H) $(RTL_H) $(TREE_H) $(SYSTEM_H)
+halfpic.o: halfpic.c $(CONFIG_H) $(RTL_H) $(TREE_H) $(SYSTEM_H) halfpic.h
#\f
# Generate header and source files from the machine description,
# and compile them.
-.PRECIOUS: insn-config.h insn-flags.h insn-codes.h \
+.PRECIOUS: insn-config.h insn-flags.h insn-codes.h insn-constants.h \
insn-emit.c insn-recog.c insn-extract.c insn-output.c insn-peep.c \
insn-attr.h insn-attrtab.c
$(SHELL) $(srcdir)/move-if-change tmp-codes.h insn-codes.h
$(STAMP) s-codes
+insn-constants.h: s-constants ; @true
+s-constants : $(md_file) genconstants$(build_exeext) $(srcdir)/move-if-change
+ ./genconstants$(build_exeext) $(md_file) > tmp-constants.h
+ $(SHELL) $(srcdir)/move-if-change tmp-constants.h insn-constants.h
+ $(STAMP) s-constants
+
insn-emit.o : insn-emit.c $(CONFIG_H) $(RTL_H) $(EXPR_H) real.h output.h \
- insn-config.h $(SYSTEM_H) reload.h $(RECOG_H) toplev.h \
+ insn-config.h $(OPTABS_H) $(SYSTEM_H) reload.h $(RECOG_H) toplev.h \
function.h flags.h hard-reg-set.h resource.h $(TM_P_H)
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-emit.c
$(STAMP) s-recog
insn-opinit.o : insn-opinit.c $(CONFIG_H) $(RTL_H) \
- insn-config.h flags.h $(RECOG_H) $(EXPR_H) reload.h $(SYSTEM_H)
+ insn-config.h flags.h $(RECOG_H) $(EXPR_H) $(OPTABS_H) reload.h $(SYSTEM_H)
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-opinit.c
insn-opinit.c: s-opinit ; @true
@true # force gnu make to recheck modification times.
s-genrtl: gengenrtl$(build_exeext) $(srcdir)/move-if-change $(RTL_BASE_H)
- ./gengenrtl$(build_exeext) -h >tmp-genrtl.h
+ ./gengenrtl$(build_exeext) -h > tmp-genrtl.h
$(SHELL) $(srcdir)/move-if-change tmp-genrtl.h genrtl.h
- ./gengenrtl$(build_exeext) >tmp-genrtl.c
+ ./gengenrtl$(build_exeext) > tmp-genrtl.c
$(SHELL) $(srcdir)/move-if-change tmp-genrtl.c genrtl.c
$(STAMP) s-genrtl
+
+tm-preds.h: s-preds; @true
+
+s-preds: genpreds$(build_exeext) $(srcdir)/move-if-change
+ ./genpreds$(build_exeext) > tmp-preds.h
+ $(SHELL) $(srcdir)/move-if-change tmp-preds.h tm-preds.h
+ $(STAMP) s-preds
+
#\f
# Compile the programs that generate insn-* from the machine description.
# They are compiled with $(HOST_CC), and associated libraries,
$(SYSTEM_H) errors.h gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gencodes.c
+genconstants$(build_exeext) : genconstants.o $(HOST_RTL) $(HOST_ERRORS) $(HOST_LIBDEPS)
+ $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
+ genconstants.o $(HOST_RTL) $(HOST_ERRORS) $(HOST_LIBS)
+
+genconstants.o : genconstants.c $(RTL_H) $(HCONFIG_H) $(SYSTEM_H) errors.h
+ $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genconstants.c
+
genemit$(build_exeext) : genemit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genemit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
gengenrtl.o : gengenrtl.c $(RTL_BASE_H) $(HCONFIG_H) $(SYSTEM_H) real.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gengenrtl.c
+
+genpreds$(build_exeext) : genpreds.o $(HOST_LIBDEPS)
+ $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
+ genpreds.o $(HOST_LIBS)
+
+genpreds.o : genpreds.c $(RTL_BASE_H) $(HCONFIG_H) $(SYSTEM_H)
+ $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genpreds.c
+
#\f
# Compile the libraries to be used by gen*.
# If we are not cross-building, gen* use the same .o's that cc1 will use,
# and HOST_PREFIX_1 is `foobar', just to ensure these rules don't conflict
# with the rules for rtl.o, etc.
$(HOST_PREFIX_1)rtl.o: $(srcdir)/rtl.c $(HCONFIG_H) $(SYSTEM_H) $(RTL_H) \
- $(GGC_H) errors.h
+ real.h $(GGC_H) errors.h
rm -f $(HOST_PREFIX)rtl.c
sed -e 's/config[.]h/hconfig.h/' $(srcdir)/rtl.c > $(HOST_PREFIX)rtl.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)rtl.c
$(HOST_PREFIX_1)print-rtl.o: $(srcdir)/print-rtl.c $(HCONFIG_H) \
- $(RTL_H) $(BASIC_BLOCK_H) $(SYSTEM_H)
+ $(RTL_H) $(TREE_H) hard-reg-set.h $(BASIC_BLOCK_H)
rm -f $(HOST_PREFIX)print-rtl.c
sed -e 's/config[.]h/hconfig.h/' $(srcdir)/print-rtl.c > $(HOST_PREFIX)print-rtl.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)print-rtl.c
$(HOST_PREFIX_1)bitmap.o: $(srcdir)/bitmap.c $(HCONFIG_H) $(SYSTEM_H) $(RTL_H) \
- flags.h bitmap.h
+ flags.h $(BASIC_BLOCK_H) $(REGS_H)
rm -f $(HOST_PREFIX)bitmap.c
sed -e 's/config[.]h/hconfig.h/' $(srcdir)/bitmap.c > $(HOST_PREFIX)bitmap.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)bitmap.c
sed -e 's/config[.]h/hconfig.h/' $(srcdir)/../libiberty/obstack.c > $(HOST_PREFIX)obstack.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)obstack.c
-$(HOST_PREFIX_1)vfprintf.o: $(srcdir)/../libiberty/vfprintf.c $(HCONFIG_H)
+$(HOST_PREFIX_1)vfprintf.o: $(srcdir)/../libiberty/vfprintf.c $(HCONFIG_H) \
+ $(SYSTEM_H)
rm -f $(HOST_PREFIX)vfprintf.c
sed -e 's/config[.]h/hconfig.h/' $(srcdir)/../libiberty/vfprintf.c > $(HOST_PREFIX)vfprintf.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)vfprintf.c
-$(HOST_PREFIX_1)doprint.o: doprint.c $(HCONFIG_H)
+$(HOST_PREFIX_1)doprint.o: doprint.c $(HCONFIG_H) $(SYSTEM_H)
rm -f $(HOST_PREFIX)doprint.c
sed -e 's/config[.]h/hconfig.h/' $(srcdir)/doprint.c > $(HOST_PREFIX)doprint.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)doprint.c
-$(HOST_PREFIX_1)strstr.o: $(srcdir)/../libiberty/strstr.c $(HCONFIG_H)
+$(HOST_PREFIX_1)strstr.o: $(srcdir)/../libiberty/strstr.c $(HCONFIG_H) \
+ $(SYSTEM_H)
rm -f $(HOST_PREFIX)strstr.c
sed -e 's/config[.]h/hconfig.h/' $(srcdir)/../libiberty/strstr.c > $(HOST_PREFIX)strstr.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)strstr.c
-$(HOST_PREFIX_1)errors.o: errors.c $(HCONFIG_H) $(SYSTEM_H)
+$(HOST_PREFIX_1)errors.o: errors.c $(HCONFIG_H) $(SYSTEM_H) errors.h
rm -f $(HOST_PREFIX)errors.c
sed -e 's/config[.]h/hconfig.h/' $(srcdir)/errors.c > $(HOST_PREFIX)errors.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)errors.c
$(HOST_PREFIX_1):
$(STAMP) $(HOST_PREFIX_1)
-$(HOST_PREFIX_1)ggc-none.o: ggc-none.c $(HCONFIG_H) $(SYSTEM_H)
+$(HOST_PREFIX_1)ggc-none.o: ggc-none.c $(HCONFIG_H) $(SYSTEM_H) $(GCC_H)
rm -f $(HOST_PREFIX)ggc-none.c
sed -e 's/config[.]h/hconfig.h/' $(srcdir)/ggc-none.c > $(HOST_PREFIX)ggc-none.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)ggc-none.c
#\f
# Remake internationalization support.
-
-intl.o: intl.c intl.h Makefile
+intl.o: intl.c $(CONFIG_H) system.h intl.h Makefile
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
-DLOCALEDIR=\"$(localedir)\" \
-c $(srcdir)/intl.c
$(top_builddir)/intl/libintl.a: intl.all
-# Make sure all the headers are there for xgettext to scan.
-$(INTL_TARGETS): $(CONFIG_H) $(srcdir)/c-parse.c
-
intl.all intl.install intl.uninstall \
intl.mostlyclean intl.clean intl.distclean intl.maintainer-clean:
@for d in $(INTL_SUBDIRS); do \
if [ $$? -eq 0 ] ; then true ; else exit 1 ; fi ; \
done
+# intl.all and intl.install need config.h to exist, and the files it includes.
+# (FIXME: intl/*.c shouldn't need to see insn-foo.h!)
+intl.all intl.install: config.h insn-flags.h insn-constants.h
+
+# Make-lang.in should add dependencies of po-generated on any generated
+# files which need to be scanned by gettext (usually Yacc-generated parsers).
+po-generated: c-parse.c tradcif.c
+
#\f
# Remake cpp and protoize.
-DGPLUSPLUS_INCLUDE_DIR=\"$(gcc_gxx_include_dir)\" \
-DGPLUSPLUS_TOOL_INCLUDE_DIR=\"$(gcc_gxx_include_dir)/$(target_alias)\" \
-DGPLUSPLUS_BACKWARD_INCLUDE_DIR=\"$(gcc_gxx_include_dir)/backward\" \
- -DLOCAL_INCLUDE_DIR=\"$(includedir)\" \
+ -DLOCAL_INCLUDE_DIR=\"$(local_includedir)\" \
-DCROSS_INCLUDE_DIR=\"$(gcc_tooldir)/sys-include\" \
-DTOOL_INCLUDE_DIR=\"$(gcc_tooldir)/include\"
LIBCPP_OBJS = cpplib.o cpplex.o cppmacro.o cppexp.o cppfiles.o \
cpphash.o cpperror.o cppinit.o cppdefault.o \
- hashtable.o mkdeps.o prefix.o version.o mbchar.o
+ hashtable.o line-map.o mkdeps.o prefix.o version.o mbchar.o
-LIBCPP_DEPS = cpplib.h cpphash.h hashtable.h intl.h $(OBSTACK_H) $(SYSTEM_H)
+LIBCPP_DEPS = $(CPPLIB_H) cpphash.h line-map.h hashtable.h intl.h \
+ $(OBSTACK_H) $(SYSTEM_H)
# Most of the other archives built/used by this makefile are for
# targets. This one is strictly for the host.
$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o cpp0$(exeext) cppmain.o \
intl.o libcpp.a $(LIBS)
-cppmain.o: cppmain.c $(CONFIG_H) cpplib.h intl.h $(SYSTEM_H)
+cppmain.o: cppmain.c $(CONFIG_H) $(CPPLIB_H) intl.h $(SYSTEM_H)
cpperror.o: cpperror.c $(CONFIG_H) $(LIBCPP_DEPS)
cppexp.o: cppexp.c $(CONFIG_H) $(LIBCPP_DEPS)
# Only one of 'gcov' or 'gcov.exe' is actually built, depending
# upon whether $(exeext) is empty or not.
-GCOV_OBJS = gcov.o intl.o
+GCOV_OBJS = gcov.o intl.o version.o
gcov$(exeext): $(GCOV_OBJS) $(LIBDEPS)
$(CC) $(ALL_CFLAGS) $(LDFLAGS) $(GCOV_OBJS) $(LIBS) -o $@
#\f
$(FIXINCSRCDIR)/server.c $(FIXINCSRCDIR)/gnu-regex.h \
$(FIXINCSRCDIR)/server.h $(FIXINCSRCDIR)/inclhack.def specs.ready
(MAKE="$(MAKE)"; srcdir=`cd $(srcdir)/fixinc && pwd` ; \
- CC="$(CC)"; CFLAGS="$(CFLAGS)"; LDFLAGS="$(LDFLAGS)"; \
+ CC="$(HOST_CC)"; CFLAGS="$(HOST_CFLAGS)"; LDFLAGS="$(HOST_LDFLAGS)"; \
WARN_CFLAGS="$(WARN_CFLAGS)"; \
export MAKE srcdir CC CFLAGS LDFLAGS WARN_CFLAGS; cd ./fixinc && \
$(SHELL) $${srcdir}/mkfixinc.sh $(build_canonical) $(target))
cp $(srcdir)/gsyslimits.h include/syslimits.h; \
fi; \
chmod a+r include/syslimits.h)
-# If $(SYSTEM_HEADER_DIR) is $(tooldir)/sys-include, and
+# If $(SYSTEM_HEADER_DIR) is $(build_tooldir)/sys-include, and
# that directory exists, then make sure that $(libsubdir) exists.
-# This is because cpp is compiled to find $(tooldir)/include via
+# This is because cpp is compiled to find $(gcc_tooldir)/include via
# $(libsubdir)/$(unlibsubdir), which will only work if $(libsubdir)
# exists.
-# We deliberately use tooldir instead of gcc_tooldir here. gcc_tooldir
-# won't work because libsubdir doesn't exist yet.
- if [ "$(SYSTEM_HEADER_DIR)" = "$(tooldir)/sys-include" ] \
- && [ -d $(tooldir)/sys-include ]; then \
+# ??? Better would be to use -isystem $(build_tooldir)/sys-include,
+# but fixincludes does not take such arguments.
+ if [ "$(SYSTEM_HEADER_DIR)" = "$(build_tooldir)/sys-include" ] \
+ && [ -d $(build_tooldir)/sys-include ]; then \
if [ -d $(libdir) ] ; then true ; else mkdir $(libdir) ; fi; \
if [ -d $(libdir)/gcc-lib ] ; then true ; else mkdir $(libdir)/gcc-lib; fi; \
if [ -d $(libdir)/gcc-lib/$(target_alias) ] ; then true ; else mkdir $(libdir)/gcc-lib/$(target_alias) ; fi; \
scan-decls.o scan.o libcpp.a $(LIBS)
fix-header.o: fix-header.c $(OBSTACK_H) scan.h \
- xsys-protos.h $(HCONFIG_H) $(SYSTEM_H) cpplib.h
+ xsys-protos.h $(HCONFIG_H) $(SYSTEM_H) $(CPPLIB_H)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/fix-header.c
-scan-decls.o: scan-decls.c scan.h cpplib.h $(HCONFIG_H) $(SYSTEM_H)
+scan-decls.o: scan-decls.c scan.h $(CPPLIB_H) $(HCONFIG_H) $(SYSTEM_H)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/scan-decls.c
# stmp-fixproto depends on this, not on fix-header directly.
doc: $(BUILD_INFO) $(GENERATED_MANPAGES) gccbug
info: $(docdir)/cpp.info $(docdir)/gcc.info lang.info $(docdir)/cppinternals.info
-$(docdir)/cpp.info: $(docdir)/cpp.texi
+$(docdir)/cpp.info: $(docdir)/cpp.texi $(docdir)/include/fdl.texi
cd $(srcdir) && $(MAKEINFO) $(MAKEINFOFLAGS) -I doc -I doc/include -o doc/cpp.info doc/cpp.texi
$(docdir)/gcc.info: $(docdir)/gcc.texi $(docdir)/extend.texi \
$(docdir)/c-tree.texi $(docdir)/rtl.texi $(docdir)/tm.texi \
$(docdir)/gcov.texi $(docdir)/contrib.texi $(docdir)/objc.texi \
$(docdir)/include/fdl.texi $(docdir)/include/gpl.texi \
- $(docdir)/include/funding.texi
+ $(docdir)/include/funding.texi $(docdir)/bugreport.texi \
+ $(docdir)/contribute.texi $(docdir)/frontends.texi \
+ $(docdir)/service.texi $(docdir)/standards.texi \
+ $(docdir)/trouble.texi $(docdir)/vms.texi $(docdir)/configterms.texi \
+ $(docdir)/fragments.texi $(docdir)/hostconfig.texi \
+ $(docdir)/include/linux-and-gnu.texi $(docdir)/interface.texi \
+ $(docdir)/makefile.texi $(docdir)/passes.texi \
+ $(docdir)/portability.texi
cd $(srcdir) && $(MAKEINFO) $(MAKEINFOFLAGS) -I doc -I doc/include -o doc/gcc.info doc/gcc.texi
$(docdir)/cppinternals.info: $(docdir)/cppinternals.texi
dvi: gcc.dvi cpp.dvi lang.dvi cppinternals.dvi
# This works with GNU Make's default rule.
-cpp.dvi: $(docdir)/cpp.texi
+cpp.dvi: $(docdir)/cpp.texi $(docdir)/include/fdl.texi
$(TEXI2DVI) -I $(docdir) -I $(docdir)/include $(docdir)/cpp.texi
gcc.dvi: $(docdir)/gcc.texi $(docdir)/extend.texi $(docdir)/install-old.texi \
$(docdir)/rtl.texi $(docdir)/tm.texi $(docdir)/gcov.texi \
$(docdir)/contrib.texi $(docdir)/objc.texi \
$(docdir)/include/fdl.texi $(docdir)/include/gpl.texi \
- $(docdir)/include/funding.texi
+ $(docdir)/include/funding.texi $(docdir)/bugreport.texi \
+ $(docdir)/contribute.texi $(docdir)/frontends.texi \
+ $(docdir)/service.texi $(docdir)/standards.texi \
+ $(docdir)/trouble.texi $(docdir)/vms.texi $(docdir)/configterms.texi \
+ $(docdir)/fragments.texi $(docdir)/hostconfig.texi \
+ $(docdir)/include/linux-and-gnu.texi $(docdir)/interface.texi \
+ $(docdir)/makefile.texi $(docdir)/passes.texi \
+ $(docdir)/portability.texi
$(TEXI2DVI) -I $(docdir) -I $(docdir)/include $(docdir)/gcc.texi
cppinternals.dvi: $(docdir)/cppinternals.texi
$(TEXI2DVI) -I $(docdir) -I $(docdir)/include $(docdir)/cppinternals.texi
-generated-manpages: $(docdir)/gcov.1 $(docdir)/cpp.1 $(docdir)/gcc.1
+generated-manpages: $(docdir)/gcov.1 $(docdir)/cpp.1 $(docdir)/gcc.1 \
+ $(docdir)/gfdl.7 $(docdir)/gpl.7 $(docdir)/fsf-funding.7
$(docdir)/gcov.1: $(docdir)/gcov.texi
$(STAMP) $(docdir)/gcov.1
-$(TEXI2POD) < $(docdir)/gcov.texi > gcov.pod
- -($(POD2MAN) gcov.pod > $(docdir)/gcov.1.T$$$$ && \
+ -($(POD2MAN) --section=1 gcov.pod > $(docdir)/gcov.1.T$$$$ && \
mv -f $(docdir)/gcov.1.T$$$$ $(docdir)/gcov.1) || \
(rm -f $(docdir)/gcov.1.T$$$$ && exit 1)
-rm -f gcov.pod
$(docdir)/cpp.1: $(docdir)/cpp.texi
$(STAMP) $(docdir)/cpp.1
-$(TEXI2POD) < $(docdir)/cpp.texi > cpp.pod
- -($(POD2MAN) cpp.pod > $(docdir)/cpp.1.T$$$$ && \
+ -($(POD2MAN) --section=1 cpp.pod > $(docdir)/cpp.1.T$$$$ && \
mv -f $(docdir)/cpp.1.T$$$$ $(docdir)/cpp.1) || \
(rm -f $(docdir)/cpp.1.T$$$$ && exit 1)
-rm -f cpp.pod
$(docdir)/gcc.1: $(docdir)/invoke.texi
$(STAMP) $(docdir)/gcc.1
-$(TEXI2POD) < $(docdir)/invoke.texi > gcc.pod
- -($(POD2MAN) gcc.pod > $(docdir)/gcc.1.T$$$$ && \
+ -($(POD2MAN) --section=1 gcc.pod > $(docdir)/gcc.1.T$$$$ && \
mv -f $(docdir)/gcc.1.T$$$$ $(docdir)/gcc.1) || \
(rm -f $(docdir)/gcc.1.T$$$$ && exit 1)
-rm -f gcc.pod
+$(docdir)/gfdl.7: $(docdir)/include/fdl.texi
+ $(STAMP) $(docdir)/gfdl.7
+ -$(TEXI2POD) < $(docdir)/include/fdl.texi > gfdl.pod
+ -($(POD2MAN) --section=7 gfdl.pod > $(docdir)/gfdl.7.T$$$$ && \
+ mv -f $(docdir)/gfdl.7.T$$$$ $(docdir)/gfdl.7) || \
+ (rm -f $(docdir)/gfdl.7.T$$$$ && exit 1)
+ -rm -f gfdl.pod
+
+$(docdir)/gpl.7: $(docdir)/include/gpl.texi
+ $(STAMP) $(docdir)/gpl.7
+ -$(TEXI2POD) < $(docdir)/include/gpl.texi > gpl.pod
+ -($(POD2MAN) --section=7 gpl.pod > $(docdir)/gpl.7.T$$$$ && \
+ mv -f $(docdir)/gpl.7.T$$$$ $(docdir)/gpl.7) || \
+ (rm -f $(docdir)/gpl.7.T$$$$ && exit 1)
+ -rm -f gpl.pod
+
+$(docdir)/fsf-funding.7: $(docdir)/include/funding.texi
+ $(STAMP) $(docdir)/fsf-funding.7
+ -$(TEXI2POD) < $(docdir)/include/funding.texi > fsf-funding.pod
+ -($(POD2MAN) --section=7 fsf-funding.pod \
+ > $(docdir)/fsf-funding.7.T$$$$ && \
+ mv -f $(docdir)/fsf-funding.7.T$$$$ $(docdir)/fsf-funding.7) || \
+ (rm -f $(docdir)/fsf-funding.7.T$$$$ && exit 1)
+ -rm -f fsf-funding.pod
+
#\f
# Deletion of files made during compilation.
# There are four levels of this:
# that don't exist in the distribution.
INTL_CLEAN = intl.clean
clean: mostlyclean $(INTL_CLEAN) lang.clean
- -rm -f libgcc.a libgcc_s$(SHLIB_EXT) libgcc_s$(SHLIB_EXT).0
+ -rm -f libgcc.a libgcc_s$(SHLIB_EXT) libgcc_s$(SHLIB_EXT).1
-rm -f config.h tconfig.h hconfig.h tm_p.h
-rm -f cs-*
-rm -rf libgcc
-rm -f mklibgcc libgcc.map gccbug .gdbinit configargs.h
-rm -f gcov.pod
-rm -f fixinc/Makefile
- -rmdir cp f java objc fixinc intl po 2>/dev/null
+ -rmdir ada cp f java objc fixinc intl po 2>/dev/null
# Delete anything likely to be found in the source directory
# that shouldn't be in the distribution.
-rm -f $(docdir)/cpp.info* $(docdir)/gcc.info*
-rm -f $(docdir)/cppinternals.info*
-rm -f $(docdir)/gcov.1 $(docdir)/cpp.1 $(docdir)/gcc.1
+ -rm -f $(docdir)/fsf-funding.7 $(docdir)/gfdl.7 $(docdir)/gpl.7
#\f
# Entry points `install' and `uninstall'.
# Also use `install-collect2' to install collect2 when the config files don't.
# Install the driver last so that the window when things are
# broken is small.
install-normal: install-common $(INSTALL_HEADERS) $(INSTALL_LIBGCC) \
- $(INSTALL_CPP) install-man install-info intl.install \
+ $(INSTALL_CPP) install-man install-info intl.install install-@POSUB@ \
lang.install-normal install-driver
# Do nothing while making gcc with a cross-compiler. The person who
-parent=`echo $(man1dir)|sed -e 's@/[^/]*$$@@'`; \
if [ -d $$parent ] ; then true ; else mkdir $$parent ; chmod a+rx $$parent ; fi
-if [ -d $(man1dir) ] ; then true ; else mkdir $(man1dir) ; chmod a+rx $(man1dir) ; fi
+ -if [ -d $(man7dir) ] ; then true ; else mkdir $(man7dir) ; chmod a+rx $(man7dir) ; fi
# Install the compiler executables built during cross compilation.
install-common: native $(EXTRA_PARTS) lang.install-common
$(INSTALL_PROGRAM) xgcc$(exeext) $(bindir)/$(GCC_INSTALL_NAME)$(exeext); \
rm -f $(bindir)/$(target_alias)-gcc-1$(exeext); \
$(LN) $(bindir)/$(GCC_INSTALL_NAME)$(exeext) $(bindir)/$(target_alias)-gcc-1$(exeext); \
- mv $(bindir)/$(target_alias)-gcc-1$(exeext) $(bindir)/$(target_alias)-gcc$(exeext); \
+ mv $(bindir)/$(target_alias)-gcc-1$(exeext) $(bindir)/$(GCC_TARGET_INSTALL_NAME)$(exeext); \
fi
# Install the info files.
# Install the man pages.
install-man: installdirs $(GENERATED_MANPAGES) lang.install-man
-if [ -f gcc-cross$(exeext) ] ; then \
- rm -f $(man1dir)/$(GCC_CROSS_NAME)$(manext); \
- $(INSTALL_DATA) $(docdir)/gcc.1 $(man1dir)/$(GCC_CROSS_NAME)$(manext); \
- chmod a-x $(man1dir)/$(GCC_CROSS_NAME)$(manext); \
+ rm -f $(man1dir)/$(GCC_CROSS_NAME)$(man1ext); \
+ $(INSTALL_DATA) $(docdir)/gcc.1 $(man1dir)/$(GCC_CROSS_NAME)$(man1ext); \
+ chmod a-x $(man1dir)/$(GCC_CROSS_NAME)$(man1ext); \
else \
- rm -f $(man1dir)/$(GCC_INSTALL_NAME)$(manext); \
- $(INSTALL_DATA) $(docdir)/gcc.1 $(man1dir)/$(GCC_INSTALL_NAME)$(manext); \
- chmod a-x $(man1dir)/$(GCC_INSTALL_NAME)$(manext); \
+ rm -f $(man1dir)/$(GCC_INSTALL_NAME)$(man1ext); \
+ $(INSTALL_DATA) $(docdir)/gcc.1 $(man1dir)/$(GCC_INSTALL_NAME)$(man1ext); \
+ chmod a-x $(man1dir)/$(GCC_INSTALL_NAME)$(man1ext); \
fi
- -rm -f $(man1dir)/cpp$(manext)
- -$(INSTALL_DATA) $(docdir)/cpp.1 $(man1dir)/cpp$(manext)
- -chmod a-x $(man1dir)/cpp$(manext)
- -rm -f $(man1dir)/gcov$(manext)
- -$(INSTALL_DATA) $(docdir)/gcov.1 $(man1dir)/gcov$(manext)
- -chmod a-x $(man1dir)/gcov$(manext)
+ -rm -f $(man1dir)/cpp$(man1ext)
+ -$(INSTALL_DATA) $(docdir)/cpp.1 $(man1dir)/cpp$(man1ext)
+ -chmod a-x $(man1dir)/cpp$(man1ext)
+ -rm -f $(man1dir)/gcov$(man1ext)
+ -$(INSTALL_DATA) $(docdir)/gcov.1 $(man1dir)/gcov$(man1ext)
+ -chmod a-x $(man1dir)/gcov$(man1ext)
+ -rm -f $(man7dir)/fsf-funding$(man7ext)
+ -$(INSTALL_DATA) $(docdir)/fsf-funding.7 $(man7dir)/fsf-funding$(man7ext)
+ -chmod a-x $(man7dir)/fsf-funding$(man7ext)
+ -rm -f $(man7dir)/gfdl$(man7ext)
+ -$(INSTALL_DATA) $(docdir)/gfdl.7 $(man7dir)/gfdl$(man7ext)
+ -chmod a-x $(man7dir)/gfdl$(man7ext)
+ -rm -f $(man7dir)/gpl$(man7ext)
+ -$(INSTALL_DATA) $(docdir)/gpl.7 $(man7dir)/gpl$(man7ext)
+ -chmod a-x $(man7dir)/gpl$(man7ext)
# Install the library.
install-libgcc: libgcc.mk libgcc.a installdirs
RANLIB_TEST_FOR_TARGET="$(RANLIB_TEST_FOR_TARGET)" \
NM_FOR_TARGET="$(NM_FOR_TARGET)" AWK="$(AWK)" \
LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" \
- INCLUDES="$(INCLUDES)" MAYBE_USE_COLLECT2="$(MAYBE_USE_COLLECT2)" \
+ INCLUDES="$(INCLUDES)" \
CONFIG_H="$(TCONFIG_H)" MACHMODE_H="$(MACHMODE_H)" \
LIB1ASMSRC='$(LIB1ASMSRC)' \
MAKEOVERRIDES= \
RANLIB_TEST_FOR_TARGET="$(RANLIB_TEST_FOR_TARGET)" \
NM_FOR_TARGET="$(NM_FOR_TARGET)" AWK="$(AWK)" \
LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" \
- INCLUDES="$(INCLUDES)" MAYBE_USE_COLLECT2="$(MAYBE_USE_COLLECT2)" \
+ INCLUDES="$(INCLUDES)" \
CONFIG_H="$(CONFIG_H)" MACHMODE_H="$(MACHMODE_H)" \
LIB1ASMSRC='$(LIB1ASMSRC)' \
MAKEOVERRIDES= \
-rm -rf $(bindir)/$(UNPROTOIZE_INSTALL_NAME)$(exeext)
-rm -rf $(bindir)/$(UNPROTOIZE_CROSS_NAME)$(exeext)
-rm -rf $(bindir)/$(GCOV_INSTALL_NAME)$(exeext)
- -rm -rf $(man1dir)/$(GCC_INSTALL_NAME)$(manext)
- -rm -rf $(man1dir)/$(GCC_CROSS_NAME)$(manext)
- -rm -rf $(man1dir)/cpp$(manext)
- -rm -rf $(man1dir)/protoize$(manext)
- -rm -rf $(man1dir)/unprotoize$(manext)
+ -rm -rf $(man1dir)/$(GCC_INSTALL_NAME)$(man1ext)
+ -rm -rf $(man1dir)/$(GCC_CROSS_NAME)$(man1ext)
+ -rm -rf $(man1dir)/cpp$(man1ext)
+ -rm -rf $(man1dir)/protoize$(man1ext)
+ -rm -rf $(man1dir)/unprotoize$(man1ext)
-rm -f $(infodir)/cpp.info* $(infodir)/gcc.info*
-rm -f $(infodir)/cppinternals.info*
#\f
-e '1,/^## All variables above are.*##/ d' >> site.exp
-@rm -f ./tmp?
-CHECK_TARGETS = check-gcc @check_languages@ @CHECK_PO@
+CHECK_TARGETS = check-gcc @check_languages@
check-c++ : check-g++
check-f77 : check-g77
export TCL_LIBRARY ; fi ; \
$(RUNTEST) --tool objc $(RUNTESTFLAGS))
-check-po:
- if test -f cp/Makefile && test -f f/Makefile && \
- test -f java/Makefile && test -f objc/Makefile; then \
- $(MAKE) -C po check-po; \
- fi
-
check-consistency: testsuite/site.exp
-rootme=`pwd`; export rootme; \
srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
unstage1 unstage2 unstage3 unstage4:
-set -vx; stage=`echo $@ | sed -e 's/un//'`; \
+ rm -f $$stage/as$(exeext); \
+ rm -f $$stage/ld$(exeext); \
+ rm -f $$stage/collect-ld$(exeext); \
if test -d $$stage; then \
mv $$stage/* . 2>/dev/null; \
for i in `cd $$stage; echo *` ; do \
echo "#error float.h values not known for cross-compiler" >> t-float.h-cross
echo "#endif" >> t-float.h-cross
mv t-float.h-cross float.h-cross
+
+# Rules for generating translated message descriptions.
+# Disabled by autoconf if the tools are not available.
+
+XGETTEXT = @XGETTEXT@
+GMSGFMT = @GMSGFMT@
+MSGMERGE = msgmerge
+
+PACKAGE = @PACKAGE@
+CATALOGS = @CATALOGS@
+
+.PHONY: build- install- build-po install-po update-po
+
+# Dummy rules to deal with dependencies produced by use of
+# "build-@POSUB@" and "install-@POSUB@" above, when NLS is disabled.
+build-: ; @true
+install-: ; @true
+
+build-po: $(CATALOGS)
+
+# This notation should be acceptable to all Make implementations used
+# by people who are interested in updating .po files.
+update-po: $(CATALOGS:.gmo=.pox)
+
+# N.B. We do not attempt to copy these into $(srcdir). The snapshot
+# script does that.
+.po.gmo:
+ test -d po || mkdir po
+ $(GMSGFMT) --statistics $< -o $@
+
+# The new .po has to be gone over by hand, so we deposit it into
+# build/po with a different extension.
+# If build/po/$(PACKAGE).pot exists, use it (it was just created),
+# else use the one in srcdir.
+.po.pox:
+ test -d po || mkdir po
+ $(MSGMERGE) $< `if test -f po/$(PACKAGE).pot; \
+ then echo po/$(PACKAGE).pot; \
+ else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o $@
+
+# This rule has to look for .gmo modules in both srcdir and
+# the cwd, and has to check that we actually have a catalog
+# for each language, in case they weren't built or included
+# with the distribution.
+install-po:
+ $(SHELL) $(srcdir)/mkinstalldirs $(DESTDIR)$(datadir)
+ for cat in $(CATALOGS); do \
+ lang=`basename $$cat | sed 's/\.gmo$$//'`; \
+ if [ -f $$cat ]; then :; \
+ elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
+ else continue; \
+ fi; \
+ dir=$(localedir)/$$lang/LC_MESSAGES; \
+ echo $(SHELL) $(srcdir)/mkinstalldirs $(DESTDIR)$$dir; \
+ $(SHELL) $(srcdir)/mkinstalldirs $(DESTDIR)$$dir || exit 1; \
+ echo $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
+ $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
+ done
+
+# Rule for regenerating the message template (gcc.pot).
+# Instead of forcing everyone to edit POTFILES.in, which proved impractical,
+# this rule has no dependencies and always regenerates gcc.pot. This is
+# relatively harmless since the .po files do not directly depend on it.
+# Note that exgettext has an awk script embedded in it which requires a
+# fairly modern (POSIX-compliant) awk.
+# The .pot file is left in the build directory.
+$(PACKAGE).pot: po/$(PACKAGE).pot
+po/$(PACKAGE).pot: force
+ test -d po || mkdir po
+ $(MAKE) po-generated
+ AWK=$(AWK) $(SHELL) $(srcdir)/po/exgettext \
+ $(XGETTEXT) $(PACKAGE) $(srcdir)
OSDN Git Service
