# These files are to have specific diagnostics suppressed, or are not to
# be subject to -Werror:
-# Bison-1.75 output often yields (harmless) -Wtraditional warnings
-build/gengtype-yacc.o-warn = -Wno-error
# flex output may yield harmless "no previous prototype" warnings
build/gengtype-lex.o-warn = -Wno-error
# SYSCALLS.c misses prototypes
CPPINC = -I$(srcdir)/../libcpp/include
# Where to find decNumber
+enable_decimal_float = @enable_decimal_float@
DECNUM = $(srcdir)/../libdecnumber
-DECNUMINC = -I$(DECNUM) -I../libdecnumber
+DECNUMFMT = $(srcdir)/../libdecnumber/$(enable_decimal_float)
+DECNUMINC = -I$(DECNUM) -I$(DECNUMFMT) -I../libdecnumber
LIBDECNUMBER = ../libdecnumber/libdecnumber.a
# Substitution type for target's getgroups 2nd arg.
# Header files that are made available under the same name
# to programs compiled with GCC.
-USER_H = $(srcdir)/ginclude/decfloat.h \
- $(srcdir)/ginclude/float.h \
+USER_H = $(srcdir)/ginclude/float.h \
$(srcdir)/ginclude/iso646.h \
$(srcdir)/ginclude/stdarg.h \
$(srcdir)/ginclude/stdbool.h \
# Purge it of unneccessary internal relative paths
# to directories that might not exist yet.
# The sed idiom for this is to repeat the search-and-replace until it doesn't match, using :a ... ta.
-SYSTEM_HEADER_DIR = `echo @SYSTEM_HEADER_DIR@ | sed -e :a -e "s,[^/]*/\.\.\/,," -e ta`
+# Use single quotes here to avoid nested double- and backquotes, this
+# macro is also used in a double-quoted context.
+SYSTEM_HEADER_DIR = `echo @SYSTEM_HEADER_DIR@ | sed -e :a -e 's,[^/]*/\.\.\/,,' -e ta`
# Control whether to run fixproto and fixincludes.
STMP_FIXPROTO = @STMP_FIXPROTO@
SCHED_INT_H = sched-int.h $(INSN_ATTR_H) $(BASIC_BLOCK_H) $(RTL_H)
INTEGRATE_H = integrate.h $(VARRAY_H)
CFGLAYOUT_H = cfglayout.h $(BASIC_BLOCK_H)
-CFGLOOP_H = cfgloop.h $(BASIC_BLOCK_H) $(RTL_H)
-IPA_UTILS_H = ipa-utils.h $(TREE_H) $(CGRAPH_H)
-IPA_REFERENCE_H = ipa-reference.h bitmap.h $(TREE_H)
-IPA_TYPE_ESCAPE_H = ipa-type-escape.h $(TREE_H)
+CFGLOOP_H = cfgloop.h $(BASIC_BLOCK_H) $(RTL_H) vecprim.h
+IPA_UTILS_H = ipa-utils.h $(TREE_H) $(CGRAPH_H)
+IPA_REFERENCE_H = ipa-reference.h bitmap.h $(TREE_H)
+IPA_TYPE_ESCAPE_H = ipa-type-escape.h $(TREE_H)
CGRAPH_H = cgraph.h $(TREE_H)
DF_H = df.h bitmap.h $(BASIC_BLOCK_H) alloc-pool.h
DDG_H = ddg.h sbitmap.h $(DF_H)
CPPLIB_H = $(srcdir)/../libcpp/include/line-map.h \
$(srcdir)/../libcpp/include/cpplib.h
DECNUM_H = $(DECNUM)/decContext.h $(DECNUM)/decDPD.h $(DECNUM)/decNumber.h \
- $(DECNUM)/decimal32.h $(DECNUM)/decimal64.h $(DECNUM)/decimal128.h
+ $(DECNUMFMT)/decimal32.h $(DECNUMFMT)/decimal64.h $(DECNUMFMT)/decimal128.h
MKDEPS_H = $(srcdir)/../libcpp/include/mkdeps.h
SYMTAB_H = $(srcdir)/../libcpp/include/symtab.h
CPP_ID_DATA_H = $(CPPLIB_H) $(srcdir)/../libcpp/include/cpp-id-data.h
C_PRETTY_PRINT_H = c-pretty-print.h $(PRETTY_PRINT_H) $(C_COMMON_H) $(TREE_H)
SCEV_H = tree-scalar-evolution.h $(GGC_H) tree-chrec.h $(PARAMS_H)
LAMBDA_H = lambda.h $(TREE_H) vec.h $(GGC_H)
-TREE_DATA_REF_H = tree-data-ref.h $(LAMBDA_H)
+TREE_DATA_REF_H = tree-data-ref.h $(LAMBDA_H) omega.h
VARRAY_H = varray.h $(MACHMODE_H) $(SYSTEM_H) coretypes.h $(TM_H)
TREE_INLINE_H = tree-inline.h $(VARRAY_H) $(SPLAY_TREE_H)
REAL_H = real.h $(MACHMODE_H)
C_OBJS = c-lang.o stub-objc.o $(C_AND_OBJC_OBJS)
# Language-independent object files.
+# We put the insn-*.o files first so that a parallel make will build
+# them sooner, because they are large and otherwise tend to be the
+# last objects to finish building.
OBJS-common = \
- double-int.o tree-chrec.o tree-scalar-evolution.o tree-data-ref.o \
- tree-cfg.o tree-dfa.o tree-eh.o tree-ssa.o tree-optimize.o tree-gimple.o \
- gimplify.o tree-pretty-print.o tree-into-ssa.o tree-ssa-ter.o \
- tree-outof-ssa.o tree-ssa-ccp.o tree-vn.o tree-ssa-uncprop.o \
- tree-ssa-dce.o tree-ssa-copy.o tree-nrv.o tree-ssa-copyrename.o \
- tree-ssa-pre.o tree-ssa-live.o tree-ssa-operands.o tree-ssa-alias.o \
- tree-ssa-phiopt.o tree-ssa-forwprop.o tree-nested.o tree-ssa-dse.o \
- tree-ssa-dom.o domwalk.o tree-tailcall.o gimple-low.o tree-iterator.o \
- omp-low.o tree-phinodes.o tree-ssanames.o tree-sra.o tree-complex.o \
- tree-vect-generic.o tree-ssa-loop.o tree-ssa-loop-niter.o \
- tree-ssa-loop-manip.o tree-ssa-threadupdate.o tree-ssa-threadedge.o \
- tree-vectorizer.o tree-vect-analyze.o tree-vect-transform.o \
- tree-vect-patterns.o tree-ssa-loop-prefetch.o tree-ssa-coalesce.o \
- tree-ssa-loop-ivcanon.o tree-ssa-propagate.o tree-ssa-address.o \
- tree-ssa-math-opts.o tree-affine.o \
- tree-ssa-loop-ivopts.o tree-if-conv.o tree-ssa-loop-unswitch.o \
- alias.o bb-reorder.o bitmap.o builtins.o caller-save.o calls.o \
- cfg.o cfganal.o cfgbuild.o cfgcleanup.o cfglayout.o cfgloop.o \
- cfgloopanal.o cfgloopmanip.o loop-init.o loop-unswitch.o loop-unroll.o \
- cfgrtl.o combine.o convert.o coverage.o cse.o cselib.o \
- dbxout.o ddg.o tree-ssa-loop-ch.o loop-invariant.o tree-ssa-loop-im.o \
- debug.o df-core.o df-problems.o df-scan.o dfp.o diagnostic.o dojump.o \
- dominance.o loop-doloop.o \
- dwarf2asm.o dwarf2out.o emit-rtl.o except.o explow.o loop-iv.o \
- expmed.o expr.o final.o flow.o fold-const.o function.o fwprop.o gcse.o \
- genrtl.o ggc-common.o global.o graph.o gtype-desc.o \
- haifa-sched.o hooks.o ifcvt.o insn-attrtab.o insn-emit.o insn-modes.o \
- insn-extract.o insn-opinit.o insn-output.o insn-peep.o insn-recog.o \
- integrate.o intl.o jump.o langhooks.o lcm.o lists.o local-alloc.o \
- mode-switching.o modulo-sched.o optabs.o options.o opts.o opts-common.o \
- params.o postreload.o postreload-gcse.o predict.o \
- insn-preds.o insn-automata.o pointer-set.o \
- print-rtl.o print-tree.o profile.o value-prof.o var-tracking.o \
- real.o recog.o reg-stack.o regclass.o regmove.o regrename.o \
- reload.o reload1.o reorg.o resource.o rtl.o rtlanal.o rtl-error.o \
- sbitmap.o sched-deps.o sched-ebb.o sched-rgn.o sched-vis.o sdbout.o \
- see.o simplify-rtx.o sreal.o stmt.o stor-layout.o stringpool.o \
- struct-equiv.o targhooks.o timevar.o toplev.o tracer.o tree.o tree-dump.o \
- varasm.o varray.o vec.o version.o vmsdbgout.o xcoffout.o alloc-pool.o \
- et-forest.o cfghooks.o bt-load.o pretty-print.o $(GGC) web.o passes.o \
- tree-profile.o rtlhooks.o cfgexpand.o lambda-mat.o \
- lambda-trans.o lambda-code.o tree-loop-linear.o tree-ssa-sink.o \
- tree-vrp.o tree-stdarg.o tree-cfgcleanup.o tree-ssa-reassoc.o \
- tree-ssa-structalias.o tree-object-size.o \
- rtl-factoring.o
-
-
+ insn-attrtab.o \
+ insn-automata.o \
+ insn-emit.o \
+ insn-extract.o \
+ insn-modes.o \
+ insn-opinit.o \
+ insn-output.o \
+ insn-peep.o \
+ insn-preds.o \
+ insn-recog.o \
+ $(GGC) \
+ alias.o \
+ alloc-pool.o \
+ bb-reorder.o \
+ bitmap.o \
+ bt-load.o \
+ builtins.o \
+ caller-save.o \
+ calls.o \
+ cfg.o \
+ cfganal.o \
+ cfgbuild.o \
+ cfgcleanup.o \
+ cfgexpand.o \
+ cfghooks.o \
+ cfglayout.o \
+ cfgloop.o \
+ cfgloopanal.o \
+ cfgloopmanip.o \
+ cfgrtl.o \
+ combine.o \
+ combine-stack-adj.o \
+ convert.o \
+ coverage.o \
+ cse.o \
+ cselib.o \
+ dbxout.o \
+ ddg.o \
+ debug.o \
+ df-core.o \
+ df-problems.o \
+ df-scan.o \
+ dfp.o \
+ diagnostic.o \
+ dojump.o \
+ dominance.o \
+ domwalk.o \
+ double-int.o \
+ dwarf2asm.o \
+ dwarf2out.o \
+ emit-rtl.o \
+ et-forest.o \
+ except.o \
+ explow.o \
+ expmed.o \
+ expr.o \
+ final.o \
+ flow.o \
+ fold-const.o \
+ function.o \
+ fwprop.o \
+ gcse.o \
+ genrtl.o \
+ ggc-common.o \
+ gimple-low.o \
+ gimplify.o \
+ global.o \
+ graph.o \
+ gtype-desc.o \
+ haifa-sched.o \
+ hooks.o \
+ ifcvt.o \
+ integrate.o \
+ intl.o \
+ jump.o \
+ lambda-code.o \
+ lambda-mat.o \
+ lambda-trans.o \
+ langhooks.o \
+ lcm.o \
+ lists.o \
+ local-alloc.o \
+ loop-doloop.o \
+ loop-init.o \
+ loop-invariant.o \
+ loop-iv.o \
+ loop-unroll.o \
+ loop-unswitch.o \
+ lower-subreg.o \
+ mode-switching.o \
+ modulo-sched.o \
+ omega.o \
+ omp-low.o \
+ optabs.o \
+ options.o \
+ opts-common.o \
+ opts.o \
+ params.o \
+ passes.o \
+ pointer-set.o \
+ postreload-gcse.o \
+ postreload.o \
+ predict.o \
+ pretty-print.o \
+ print-rtl.o \
+ print-tree.o \
+ profile.o \
+ real.o \
+ recog.o \
+ reg-stack.o \
+ regclass.o \
+ regmove.o \
+ regrename.o \
+ reload.o \
+ reload1.o \
+ reorg.o \
+ resource.o \
+ rtl-error.o \
+ rtl-factoring.o \
+ rtl.o \
+ rtlanal.o \
+ rtlhooks.o \
+ sbitmap.o \
+ sched-deps.o \
+ sched-ebb.o \
+ sched-rgn.o \
+ sched-vis.o \
+ sdbout.o \
+ see.o \
+ simplify-rtx.o \
+ sreal.o \
+ stmt.o \
+ stor-layout.o \
+ stringpool.o \
+ struct-equiv.o \
+ targhooks.o \
+ timevar.o \
+ toplev.o \
+ tracer.o \
+ tree-affine.o \
+ tree-cfg.o \
+ tree-cfgcleanup.o \
+ tree-chrec.o \
+ tree-complex.o \
+ tree-data-ref.o \
+ tree-dfa.o \
+ tree-dump.o \
+ tree-eh.o \
+ tree-gimple.o \
+ tree-if-conv.o \
+ tree-into-ssa.o \
+ tree-iterator.o \
+ tree-loop-linear.o \
+ tree-nested.o \
+ tree-nrv.o \
+ tree-object-size.o \
+ tree-optimize.o \
+ tree-outof-ssa.o \
+ tree-phinodes.o \
+ tree-pretty-print.o \
+ tree-profile.o \
+ tree-scalar-evolution.o \
+ tree-sra.o \
+ tree-ssa-address.o \
+ tree-ssa-alias.o \
+ tree-ssa-ccp.o \
+ tree-ssa-coalesce.o \
+ tree-ssa-copy.o \
+ tree-ssa-copyrename.o \
+ tree-ssa-dce.o \
+ tree-ssa-dom.o \
+ tree-ssa-dse.o \
+ tree-ssa-forwprop.o \
+ tree-ssa-live.o \
+ tree-ssa-loop-ch.o \
+ tree-ssa-loop-im.o \
+ tree-ssa-loop-ivcanon.o \
+ tree-ssa-loop-ivopts.o \
+ tree-ssa-loop-manip.o \
+ tree-ssa-loop-niter.o \
+ tree-ssa-loop-prefetch.o \
+ tree-ssa-loop-unswitch.o \
+ tree-ssa-loop.o \
+ tree-ssa-math-opts.o \
+ tree-ssa-operands.o \
+ tree-ssa-phiopt.o \
+ tree-ssa-pre.o \
+ tree-ssa-propagate.o \
+ tree-ssa-reassoc.o \
+ tree-ssa-sink.o \
+ tree-ssa-structalias.o \
+ tree-ssa-ter.o \
+ tree-ssa-threadedge.o \
+ tree-ssa-threadupdate.o \
+ tree-ssa-uncprop.o \
+ tree-ssa.o \
+ tree-ssanames.o \
+ tree-stdarg.o \
+ tree-tailcall.o \
+ tree-vect-analyze.o \
+ tree-vect-generic.o \
+ tree-vect-patterns.o \
+ tree-vect-transform.o \
+ tree-vectorizer.o \
+ tree-vn.o \
+ tree-vrp.o \
+ tree.o \
+ value-prof.o \
+ var-tracking.o \
+ varasm.o \
+ varray.o \
+ vec.o \
+ version.o \
+ vmsdbgout.o \
+ web.o \
+ xcoffout.o
+
+# Target object files.
OBJS-md = $(out_object_file)
-OBJS-archive = $(EXTRA_OBJS) $(host_hook_obj) tree-inline.o \
- cgraph.o cgraphunit.o cgraphbuild.o tree-nomudflap.o ipa.o ipa-inline.o \
- ipa-utils.o ipa-reference.o ipa-pure-const.o ipa-type-escape.o \
- ipa-prop.o ipa-cp.o varpool.o
-OBJS = $(OBJS-common) $(out_object_file) $(OBJS-archive)
+# Language independent object files which are not used by all languages.
+OBJS-archive = \
+ $(EXTRA_OBJS) \
+ $(host_hook_obj) \
+ cgraph.o \
+ cgraphbuild.o \
+ cgraphunit.o \
+ ipa-cp.o \
+ ipa-inline.o \
+ ipa-prop.o \
+ ipa-pure-const.o \
+ ipa-reference.o \
+ ipa-type-escape.o \
+ ipa-utils.o \
+ ipa.o \
+ tree-inline.o \
+ tree-nomudflap.o \
+ varpool.o
+
+OBJS = $(OBJS-common) $(OBJS-md) $(OBJS-archive)
OBJS-onestep = libbackend.o $(OBJS-archive)
insn-attr.h insn-attrtab.c insn-opinit.c insn-preds.c insn-constants.h \
tm-preds.h tm-constrs.h \
tree-check.h min-insn-modes.c insn-modes.c insn-modes.h \
- genrtl.c genrtl.h gt-*.h gtype-*.h gtype-desc.c gtyp-gen.h \
+ genrtl.c genrtl.h gt-*.h gtype-*.h gtype-desc.c gtyp-input.list \
xgcc$(exeext) cpp$(exeext) cc1$(exeext) cc1*-dummy$(exeext) $(EXTRA_PASSES) \
$(EXTRA_PARTS) $(EXTRA_PROGRAMS) gcc-cross$(exeext) \
protoize$(exeext) unprotoize$(exeext) \
LIBGCOV = _gcov _gcov_merge_add _gcov_merge_single _gcov_merge_delta \
_gcov_fork _gcov_execl _gcov_execlp _gcov_execle \
_gcov_execv _gcov_execvp _gcov_execve \
- _gcov_interval_profiler _gcov_pow2_profiler _gcov_one_value_profiler
+ _gcov_interval_profiler _gcov_pow2_profiler _gcov_one_value_profiler \
+ _gcov_indirect_call_profiler _gcov_average_profiler _gcov_ior_profiler \
+ _gcov_merge_ior
FPBIT_FUNCS = _pack_sf _unpack_sf _addsub_sf _mul_sf _div_sf \
_fpcmp_parts_sf _compare_sf _eq_sf _ne_sf _gt_sf _ge_sf \
libgcc-support lang.all.cross doc @GENINSRC@ srcextra
# This is what must be made before installing GCC and converting libraries.
start.encap: native xgcc$(exeext) cpp$(exeext) specs \
- libgcc-support xlimits.h lang.start.encap @GENINSRC@ srcextra
+ libgcc-support lang.start.encap @GENINSRC@ srcextra
# These can't be made until after GCC can run.
rest.encap: $(STMP_FIXPROTO) lang.rest.encap
# This is what is made with the host's compiler
$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(C_OBJS) cc1-checksum.o \
$(BACKEND) $(LIBS)
-# Build the version of limits.h that we will install.
-xlimits.h: glimits.h limitx.h limity.h
- if $(LIMITS_H_TEST) ; then \
- cat $(srcdir)/limitx.h $(srcdir)/glimits.h $(srcdir)/limity.h > tmp-xlimits.h; \
- else \
- cat $(srcdir)/glimits.h > tmp-xlimits.h; \
- fi
- mv tmp-xlimits.h xlimits.h
#\f
# Build libgcc.a.
libgcc-support: libgcc.mvars stmp-int-hdrs $(STMP_FIXPROTO) $(TCONFIG_H) \
$(MACHMODE_H) $(FPBIT) $(DPBIT) $(TPBIT) $(LIB2ADD) \
- $(LIB2ADD_ST) $(LIB2ADDEH) gcov-iov.h $(SFP_MACHINE)
+ $(LIB2ADD_ST) $(LIB2ADDEH) $(srcdir)/emutls.c gcov-iov.h $(SFP_MACHINE)
libgcc.mvars: config.status Makefile $(LIB2ADD) $(LIB2ADD_ST) specs \
xgcc$(exeext) stamp-as stamp-collect-ld stamp-nm
echo LIBGCOV = '$(LIBGCOV)' >> tmp-libgcc.mvars
echo LIB2ADD = '$(call srcdirify,$(LIB2ADD))' >> tmp-libgcc.mvars
echo LIB2ADD_ST = '$(call srcdirify,$(LIB2ADD_ST))' >> tmp-libgcc.mvars
- echo LIB2ADDEH = '$(call srcdirify,$(LIB2ADDEH))' >> tmp-libgcc.mvars
- echo LIB2ADDEHSTATIC = '$(call srcdirify,$(LIB2ADDEHSTATIC))' >> tmp-libgcc.mvars
- echo LIB2ADDEHSHARED = '$(call srcdirify,$(LIB2ADDEHSHARED))' >> tmp-libgcc.mvars
+ echo LIB2ADDEH = '$(call srcdirify,$(LIB2ADDEH) $(srcdir)/emutls.c)' >> tmp-libgcc.mvars
+ echo LIB2ADDEHSTATIC = '$(call srcdirify,$(LIB2ADDEHSTATIC) $(srcdir)/emutls.c)' >> tmp-libgcc.mvars
+ echo LIB2ADDEHSHARED = '$(call srcdirify,$(LIB2ADDEHSHARED) $(srcdir)/emutls.c)' >> tmp-libgcc.mvars
echo LIB2_SIDITI_CONV_FUNCS = '$(LIB2_SIDITI_CONV_FUNCS)' >> tmp-libgcc.mvars
echo LIBUNWIND = '$(call srcdirify,$(LIBUNWIND))' >> tmp-libgcc.mvars
echo SHLIBUNWIND_LINK = '$(SHLIBUNWIND_LINK)' >> tmp-libgcc.mvars
srcextra: gcc.srcextra lang.srcextra
-gcc.srcextra: gengtype-lex.c gengtype-yacc.c gengtype-yacc.h
+gcc.srcextra: gengtype-lex.c
-cp -p $^ $(srcdir)
c-incpath.o: c-incpath.c c-incpath.h $(CONFIG_H) $(SYSTEM_H) $(CPPLIB_H) \
options.c: optionlist $(srcdir)/opt-functions.awk $(srcdir)/optc-gen.awk
$(AWK) -f $(srcdir)/opt-functions.awk -f $(srcdir)/optc-gen.awk \
- -v header_name="config.h system.h coretypes.h tm.h" < $< > $@
+ -v header_name="config.h system.h coretypes.h tm.h" < $< > $@
options.h: s-options-h ; @true
s-options-h: optionlist $(srcdir)/opt-functions.awk $(srcdir)/opth-gen.awk
$(TREE_GIMPLE_H) $(TREE_INLINE_H) $(VARRAY_H) vecprim.h
tree-ssa-ter.o : tree-ssa-ter.c $(TREE_FLOW_H) $(CONFIG_H) $(SYSTEM_H) \
$(TREE_H) $(DIAGNOSTIC_H) $(TM_H) coretypes.h $(TREE_DUMP_H) \
- $(TREE_SSA_LIVE_H) bitmap.h
+ $(TREE_SSA_LIVE_H) bitmap.h
tree-ssa-coalesce.o : tree-ssa-coalesce.c $(TREE_FLOW_H) $(CONFIG_H) \
$(SYSTEM_H) $(TREE_H) $(DIAGNOSTIC_H) $(TM_H) coretypes.h $(TREE_DUMP_H) \
- $(TREE_SSA_LIVE_H) bitmap.h $(FLAGS_H) $(HASHTAB_H) toplev.h
+ $(TREE_SSA_LIVE_H) bitmap.h $(FLAGS_H) $(HASHTAB_H) toplev.h
tree-outof-ssa.o : tree-outof-ssa.c $(TREE_FLOW_H) $(CONFIG_H) $(SYSTEM_H) \
$(TREE_H) $(DIAGNOSTIC_H) $(TIMEVAR_H) $(TM_H) coretypes.h $(TREE_DUMP_H) \
- tree-pass.h $(TREE_SSA_LIVE_H) $(BASIC_BLOCK_H) bitmap.h $(GGC_H) toplev.h
+ tree-pass.h $(TREE_SSA_LIVE_H) $(BASIC_BLOCK_H) bitmap.h $(GGC_H) toplev.h
tree-ssa-dse.o : tree-ssa-dse.c $(CONFIG_H) $(SYSTEM_H) coretypes.h \
$(TM_H) $(GGC_H) $(TREE_H) $(RTL_H) $(TM_P_H) $(BASIC_BLOCK_H) \
$(TREE_FLOW_H) tree-pass.h $(TREE_DUMP_H) domwalk.h $(FLAGS_H) \
$(TREE_H) $(BASIC_BLOCK_H) $(TREE_FLOW_H) domwalk.h $(GGC_H)
tree-ssa-live.o : tree-ssa-live.c $(TREE_FLOW_H) $(CONFIG_H) $(SYSTEM_H) \
$(TREE_H) $(DIAGNOSTIC_H) $(TM_H) coretypes.h $(TREE_DUMP_H) \
- $(TREE_SSA_LIVE_H) bitmap.h toplev.h
+ $(TREE_SSA_LIVE_H) bitmap.h toplev.h
tree-ssa-copyrename.o : tree-ssa-copyrename.c $(TREE_FLOW_H) $(CONFIG_H) \
$(SYSTEM_H) $(TREE_H) $(DIAGNOSTIC_H) $(FUNCTION_H) $(TIMEVAR_H) tree-pass.h \
$(TM_H) coretypes.h $(TREE_DUMP_H) $(TREE_SSA_LIVE_H) $(BASIC_BLOCK_H) \
tree-vrp.o : tree-vrp.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
$(TREE_FLOW_H) tree-pass.h $(TREE_DUMP_H) $(DIAGNOSTIC_H) $(GGC_H) \
$(BASIC_BLOCK_H) tree-ssa-propagate.h $(FLAGS_H) $(TREE_DUMP_H) \
- $(CFGLOOP_H) $(SCEV_H) tree-chrec.h $(TIMEVAR_H) toplev.h
+ $(CFGLOOP_H) $(SCEV_H) tree-chrec.h $(TIMEVAR_H) toplev.h intl.h
tree-cfg.o : tree-cfg.c $(TREE_FLOW_H) $(CONFIG_H) $(SYSTEM_H) \
$(RTL_H) $(TREE_H) $(TM_P_H) $(EXPR_H) $(GGC_H) $(FLAGS_H) output.h \
$(DIAGNOSTIC_H) $(FUNCTION_H) $(TIMEVAR_H) $(TM_H) coretypes.h \
$(TREE_DUMP_H) except.h langhooks.h $(CFGLOOP_H) tree-pass.h \
- $(CFGLAYOUT_H) $(BASIC_BLOCK_H) hard-reg-set.h $(HASHTAB_H) toplev.h \
+ $(CFGLAYOUT_H) $(BASIC_BLOCK_H) hard-reg-set.h toplev.h \
tree-ssa-propagate.h
tree-cfgcleanup.o : tree-cfgcleanup.c $(TREE_FLOW_H) $(CONFIG_H) $(SYSTEM_H) \
$(RTL_H) $(TREE_H) $(TM_P_H) $(EXPR_H) $(GGC_H) $(FLAGS_H) output.h \
- $(DIAGNOSTIC_H) errors.h $(FUNCTION_H) $(TIMEVAR_H) $(TM_H) coretypes.h \
+ $(DIAGNOSTIC_H) toplev.h $(FUNCTION_H) $(TIMEVAR_H) $(TM_H) coretypes.h \
$(TREE_DUMP_H) except.h langhooks.h $(CFGLOOP_H) tree-pass.h \
$(CFGLAYOUT_H) $(BASIC_BLOCK_H) hard-reg-set.h $(HASHTAB_H) toplev.h \
tree-ssa-propagate.h
tree-nested.o: tree-nested.c $(CONFIG_H) $(SYSTEM_H) $(TM_H) $(TREE_H) \
$(RTL_H) $(TM_P_H) $(FUNCTION_H) $(TREE_DUMP_H) $(TREE_INLINE_H) \
tree-iterator.h $(TREE_GIMPLE_H) $(CGRAPH_H) $(EXPR_H) langhooks.h \
- $(GGC_H) gt-tree-nested.h coretypes.h $(TREE_FLOW_H)
+ $(GGC_H) gt-tree-nested.h coretypes.h $(TREE_FLOW_H) pointer-set.h
tree-if-conv.o: tree-if-conv.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
$(TREE_H) $(FLAGS_H) $(TIMEVAR_H) $(BASIC_BLOCK_H) $(TREE_FLOW_H) \
$(CFGLOOP_H) $(RTL_H) $(C_COMMON_H) tree-chrec.h $(TREE_DATA_REF_H) \
$(TREE_INLINE_H) $(HASHTAB_H) pointer-set.h $(FLAGS_H) $(FUNCTION_H) \
$(TIMEVAR_H) convert.h $(TM_H) coretypes.h langhooks.h $(TREE_DUMP_H) \
tree-pass.h $(PARAMS_H) $(CGRAPH_H) $(BASIC_BLOCK_H) hard-reg-set.h \
- $(TREE_GIMPLE_H)
+ $(TREE_GIMPLE_H)
tree-ssa-operands.o : tree-ssa-operands.c $(TREE_FLOW_H) $(CONFIG_H) \
$(SYSTEM_H) $(TREE_H) $(GGC_H) $(DIAGNOSTIC_H) errors.h $(TREE_INLINE_H) \
$(FLAGS_H) $(FUNCTION_H) $(TM_H) $(TIMEVAR_H) tree-pass.h toplev.h \
tree-ssa-loop-unswitch.o : tree-ssa-loop-unswitch.c $(TREE_FLOW_H) \
$(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) $(TM_P_H) $(CFGLOOP_H) \
domwalk.h $(PARAMS_H) output.h $(DIAGNOSTIC_H) $(TIMEVAR_H) $(TM_H) \
- coretypes.h $(TREE_DUMP_H) tree-pass.h $(BASIC_BLOCK_H) hard-reg-set.h
+ coretypes.h $(TREE_DUMP_H) tree-pass.h $(BASIC_BLOCK_H) hard-reg-set.h \
+ $(TREE_INLINE_H)
tree-ssa-address.o : tree-ssa-address.c $(TREE_FLOW_H) $(CONFIG_H) \
$(SYSTEM_H) $(RTL_H) $(TREE_H) $(TM_P_H) \
output.h $(DIAGNOSTIC_H) $(TIMEVAR_H) $(TM_H) coretypes.h $(TREE_DUMP_H) \
output.h $(DIAGNOSTIC_H) $(TIMEVAR_H) $(TM_H) coretypes.h $(TREE_DUMP_H) \
tree-pass.h $(GGC_H) $(RECOG_H) insn-config.h $(HASHTAB_H) $(SCEV_H) \
$(CFGLOOP_H) $(PARAMS_H) langhooks.h $(BASIC_BLOCK_H) hard-reg-set.h \
- tree-chrec.h toplev.h langhooks.h
+ tree-chrec.h toplev.h langhooks.h $(TREE_INLINE_H)
tree-ssa-loop-ivopts.o : tree-ssa-loop-ivopts.c $(TREE_FLOW_H) $(CONFIG_H) \
$(SYSTEM_H) $(RTL_H) $(TREE_H) $(TM_P_H) $(CFGLOOP_H) $(EXPR_H) \
output.h $(DIAGNOSTIC_H) $(TIMEVAR_H) $(TM_H) coretypes.h $(TREE_DUMP_H) \
tree-pass.h $(GGC_H) $(RECOG_H) insn-config.h $(HASHTAB_H) $(SCEV_H) \
$(CFGLOOP_H) $(PARAMS_H) langhooks.h $(BASIC_BLOCK_H) hard-reg-set.h \
- tree-chrec.h $(VARRAY_H) tree-affine.h
+ tree-chrec.h $(VARRAY_H) tree-affine.h pointer-set.h
tree-affine.o : tree-affine.c tree-affine.h $(CONFIG_H) \
$(SYSTEM_H) $(RTL_H) $(TREE_H) $(TM_P_H) \
output.h $(DIAGNOSTIC_H) $(TM_H) coretypes.h $(TREE_DUMP_H)
$(SYSTEM_H) $(RTL_H) $(TREE_H) $(TM_P_H) $(CFGLOOP_H) \
output.h $(DIAGNOSTIC_H) $(TIMEVAR_H) $(TM_H) coretypes.h $(TREE_DUMP_H) \
tree-pass.h $(CFGLAYOUT_H) $(SCEV_H) $(BASIC_BLOCK_H) hard-reg-set.h \
- $(PARAMS_H)
+ $(PARAMS_H) $(TREE_INLINE_H)
tree-ssa-loop-im.o : tree-ssa-loop-im.c $(TREE_FLOW_H) $(CONFIG_H) \
$(SYSTEM_H) $(RTL_H) $(TREE_H) $(TM_P_H) $(CFGLOOP_H) domwalk.h \
$(PARAMS_H) output.h $(DIAGNOSTIC_H) $(TIMEVAR_H) $(TM_H) coretypes.h \
$(SYSTEM_H) $(TREE_H) $(GGC_H) $(DIAGNOSTIC_H) errors.h $(TIMEVAR_H) \
$(TM_H) coretypes.h $(TREE_DUMP_H) tree-pass.h $(FLAGS_H) tree-iterator.h\
$(BASIC_BLOCK_H) $(TREE_GIMPLE_H) $(TREE_INLINE_H) vec.h \
- alloc-pool.h
+ alloc-pool.h pointer-set.h
tree-optimize.o : tree-optimize.c $(TREE_FLOW_H) $(CONFIG_H) $(SYSTEM_H) \
$(RTL_H) $(TREE_H) $(TM_P_H) $(EXPR_H) $(GGC_H) output.h $(DIAGNOSTIC_H) \
$(FLAGS_H) $(TIMEVAR_H) $(TM_H) coretypes.h $(TREE_DUMP_H) toplev.h \
tree-browser.o : tree-browser.c tree-browser.def $(CONFIG_H) $(SYSTEM_H) \
$(TREE_H) $(TREE_INLINE_H) $(DIAGNOSTIC_H) $(HASHTAB_H) \
$(TM_H) coretypes.h
+omega.o : omega.c omega.h $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
+ errors.h $(GGC_H) $(TREE_H) diagnostic.h varray.h tree-pass.h
tree-chrec.o: tree-chrec.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
$(GGC_H) $(TREE_H) $(REAL_H) $(SCEV_H) tree-pass.h $(PARAMS_H) \
$(DIAGNOSTIC_H) $(CFGLOOP_H) $(TREE_FLOW_H)
value-prof.h
fold-const.o : fold-const.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
$(TREE_H) $(FLAGS_H) $(REAL_H) toplev.h $(HASHTAB_H) $(EXPR_H) $(RTL_H) \
- $(GGC_H) $(TM_P_H) langhooks.h $(MD5_H)
+ $(GGC_H) $(TM_P_H) langhooks.h $(MD5_H) intl.h
diagnostic.o : diagnostic.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
$(TREE_H) version.h $(TM_P_H) $(FLAGS_H) input.h toplev.h intl.h \
$(DIAGNOSTIC_H) langhooks.h $(LANGHOOKS_DEF_H) diagnostic.def opts.h
langhooks.h insn-flags.h $(CFGLAYOUT_H) $(REAL_H) $(CFGLOOP_H) \
hosthooks.h $(CGRAPH_H) $(COVERAGE_H) tree-pass.h $(TREE_DUMP_H) \
$(GGC_H) $(INTEGRATE_H) $(CPPLIB_H) opts.h $(TREE_FLOW_H) $(TREE_INLINE_H) \
- gt-passes.h
+ gt-passes.h $(PREDICT_H)
main.o : main.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) toplev.h
$(BCONFIG_H) $(REAL_H)
rtlanal.o : rtlanal.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) toplev.h \
$(RTL_H) hard-reg-set.h $(TM_P_H) insn-config.h $(RECOG_H) $(REAL_H) \
- $(FLAGS_H) $(REGS_H) output.h $(TARGET_H) $(FUNCTION_H)
+ $(FLAGS_H) $(REGS_H) output.h $(TARGET_H) $(FUNCTION_H) $(TREE_H)
varasm.o : varasm.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
$(RTL_H) $(FLAGS_H) $(FUNCTION_H) $(EXPR_H) hard-reg-set.h $(REGS_H) \
$(TREE_H) langhooks.h $(TREE_INLINE_H) toplev.h $(FLAGS_H) $(GGC_H) \
$(TARGET_H) $(CGRAPH_H) intl.h pointer-set.h $(FUNCTION_H) $(TREE_GIMPLE_H) \
$(TREE_FLOW_H) tree-pass.h $(C_COMMON_H) debug.h $(DIAGNOSTIC_H) \
- $(FIBHEAP_H) output.h $(PARAMS_H) $(RTL_H) $(TIMEVAR_H) ipa-prop.h
+ $(FIBHEAP_H) output.h $(PARAMS_H) $(RTL_H) $(TIMEVAR_H) ipa-prop.h
cgraphbuild.o : cgraphbuild.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
$(TREE_H) langhooks.h $(CGRAPH_H) intl.h pointer-set.h $(TREE_GIMPLE_H) \
- $(TREE_FLOW_H) tree-pass.h
+ $(TREE_FLOW_H) tree-pass.h
varpool.o : varpool.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
$(TREE_H) langhooks.h $(TREE_INLINE_H) toplev.h $(FLAGS_H) $(GGC_H) \
$(TARGET_H) $(CGRAPH_H) intl.h pointer-set.h $(FUNCTION_H) $(TREE_GIMPLE_H) \
$(TREE_FLOW_H) tree-pass.h $(C_COMMON_H) debug.h $(DIAGNOSTIC_H) \
$(FIBHEAP_H) output.h $(PARAMS_H) $(RTL_H) $(TIMEVAR_H) ipa-prop.h \
gt-varpool.h
-ipa.o : ipa.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(CGRAPH_H)
+ipa.o : ipa.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(CGRAPH_H)
ipa-prop.o : ipa-prop.c $(CONFIG_H) $(SYSTEM_H) coretypes.h \
langhooks.h $(GGC_H) $(TARGET_H) $(CGRAPH_H) ipa-prop.h \
$(TREE_FLOW_H) $(TM_H) tree-pass.h $(FLAGS_H) $(TREE_H)
ipa-cp.o : ipa-cp.c $(CONFIG_H) $(SYSTEM_H) coretypes.h \
- langhooks.h $(TARGET_H) $(CGRAPH_H) ipa-prop.h \
+ langhooks.h $(TARGET_H) $(CGRAPH_H) ipa-prop.h tree-inline.h tree-dump.h \
$(TREE_FLOW_H) $(TM_H) tree-pass.h $(FLAGS_H) $(TREE_H) $(DIAGNOSTIC_H)
ipa-inline.o : ipa-inline.c gt-ipa-inline.h $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
$(TREE_H) langhooks.h $(TREE_INLINE_H) $(FLAGS_H) $(CGRAPH_H) intl.h \
$(DIAGNOSTIC_H) $(FIBHEAP_H) $(PARAMS_H) $(TIMEVAR_H) tree-pass.h \
- $(COVERAGE_H) $(HASHTAB_H)
+ $(COVERAGE_H) $(HASHTAB_H) $(RTL_H)
ipa-utils.o : ipa-utils.c $(IPA_UTILS_H) $(CONFIG_H) $(SYSTEM_H) \
coretypes.h $(TM_H) $(TREE_H) $(TREE_FLOW_H) $(TREE_INLINE_H) langhooks.h \
pointer-set.h $(GGC_H) $(C_COMMON_H) $(TREE_GIMPLE_H) \
- $(CGRAPH_H) output.h $(FLAGS_H) tree-pass.h $(DIAGNOSTIC_H)
+ $(CGRAPH_H) output.h $(FLAGS_H) tree-pass.h $(DIAGNOSTIC_H)
ipa-reference.o : ipa-reference.c $(CONFIG_H) $(SYSTEM_H) \
coretypes.h $(TM_H) $(TREE_H) $(TREE_FLOW_H) $(TREE_INLINE_H) langhooks.h \
pointer-set.h $(GGC_H) $(IPA_REFERENCE_H) $(IPA_UTILS_H) $(C_COMMON_H) \
$(TREE_GIMPLE_H) $(CGRAPH_H) output.h $(FLAGS_H) tree-pass.h \
- $(DIAGNOSTIC_H) $(FUNCTION_H)
+ $(DIAGNOSTIC_H) $(FUNCTION_H)
ipa-pure-const.o : ipa-pure-const.c $(CONFIG_H) $(SYSTEM_H) \
coretypes.h $(TM_H) $(TREE_H) $(TREE_FLOW_H) $(TREE_INLINE_H) langhooks.h \
pointer-set.h $(GGC_H) $(IPA_UTILS_H) $(C_COMMON_H) $(TARGET_H) \
- $(TREE_GIMPLE_H) $(CGRAPH_H) output.h $(FLAGS_H) tree-pass.h $(DIAGNOSTIC_H)
+ $(TREE_GIMPLE_H) $(CGRAPH_H) output.h $(FLAGS_H) tree-pass.h $(DIAGNOSTIC_H)
ipa-type-escape.o : ipa-type-escape.c $(CONFIG_H) $(SYSTEM_H) \
coretypes.h $(TM_H) $(TREE_H) $(TREE_FLOW_H) $(TREE_INLINE_H) langhooks.h \
pointer-set.h $(GGC_H) $(IPA_TYPE_ESCAPE_H) $(IPA_UTILS_H) $(C_COMMON_H) \
$(TREE_GIMPLE_H) $(CGRAPH_H) output.h $(FLAGS_H) tree-pass.h \
- $(DIAGNOSTIC_H) $(FUNCTION_H)
+ $(DIAGNOSTIC_H) $(FUNCTION_H)
coverage.o : coverage.c $(GCOV_IO_H) $(CONFIG_H) $(SYSTEM_H) coretypes.h \
$(TM_H) $(RTL_H) $(TREE_H) $(FLAGS_H) output.h $(REGS_H) $(EXPR_H) \
$(SYSTEM_H) $(RTL_H) $(TREE_H) $(TM_P_H) $(EXPR_H) $(GGC_H) output.h \
$(DIAGNOSTIC_H) $(FUNCTION_H) $(TIMEVAR_H) $(TM_H) coretypes.h \
$(TREE_DUMP_H) $(BASIC_BLOCK_H) tree-pass.h langhooks.h \
- tree-ssa-propagate.h $(FLAGS_H) $(TARGET_H)
+ tree-ssa-propagate.h $(FLAGS_H) $(TARGET_H) toplev.h
tree-sra.o : tree-sra.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(RTL_H) \
$(TM_P_H) $(TREE_FLOW_H) $(DIAGNOSTIC_H) $(TREE_INLINE_H) \
$(TIMEVAR_H) $(TM_H) coretypes.h $(TREE_DUMP_H) $(TREE_GIMPLE_H) \
df-scan.o : df-scan.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
insn-config.h $(RECOG_H) $(FUNCTION_H) $(REGS_H) alloc-pool.h \
hard-reg-set.h $(BASIC_BLOCK_H) $(DF_H) bitmap.h sbitmap.h $(TM_P_H) \
- $(FLAGS_H) $(TARGET_H) $(TARGET_DEF_H) $(TREE_H) output.h tree-pass.h
+ $(FLAGS_H) $(TARGET_H) $(TARGET_DEF_H) $(TREE_H) output.h tree-pass.h
var-tracking.o : var-tracking.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
$(RTL_H) $(TREE_H) hard-reg-set.h insn-config.h reload.h $(FLAGS_H) \
$(BASIC_BLOCK_H) output.h sbitmap.h alloc-pool.h $(FIBHEAP_H) $(HASHTAB_H) \
tree-profile.o : tree-profile.c $(CONFIG_H) $(SYSTEM_H) coretypes.h \
$(TM_H) $(RTL_H) $(TREE_H) $(FLAGS_H) output.h $(REGS_H) $(EXPR_H) \
$(FUNCTION_H) toplev.h $(COVERAGE_H) $(TREE_H) value-prof.h $(TREE_DUMP_H) \
- tree-pass.h $(TREE_FLOW_H) $(TIMEVAR_H) $(GGC_H) gt-tree-profile.h
+ tree-pass.h $(TREE_FLOW_H) $(TIMEVAR_H) $(GGC_H) gt-tree-profile.h $(CGRAPH_H)
value-prof.o : value-prof.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
$(BASIC_BLOCK_H) hard-reg-set.h value-prof.h $(EXPR_H) output.h $(FLAGS_H) \
$(RECOG_H) insn-config.h $(OPTABS_H) $(REGS_H) $(GGC_H) $(DIAGNOSTIC_H) \
$(REGS_H) $(EMIT_RTL_H) $(CFGLAYOUT_H) tree-pass.h $(CFGLOOP_H) $(EXPR_H)
cfgloop.o : cfgloop.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) coretypes.h $(TM_H) \
$(BASIC_BLOCK_H) hard-reg-set.h $(CFGLOOP_H) $(FLAGS_H) $(FUNCTION_H) \
- $(OBSTACK_H) toplev.h $(TREE_FLOW_H) $(TREE_H)
+ $(OBSTACK_H) toplev.h $(TREE_FLOW_H) $(TREE_H) pointer-set.h output.h
cfgloopanal.o : cfgloopanal.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) \
$(BASIC_BLOCK_H) hard-reg-set.h $(CFGLOOP_H) $(EXPR_H) coretypes.h $(TM_H) \
$(OBSTACK_H) output.h
insn-config.h $(TIMEVAR_H) tree-pass.h \
$(RECOG_H) output.h $(REGS_H) hard-reg-set.h $(FLAGS_H) $(FUNCTION_H) \
$(EXPR_H) $(BASIC_BLOCK_H) toplev.h $(TM_P_H) except.h reload.h
+combine-stack-adj.o : combine-stack-adj.c $(CONFIG_H) $(SYSTEM_H) coretypes.h \
+ $(TM_H) $(RTL_H) insn-config.h $(TIMEVAR_H) tree-pass.h \
+ $(RECOG_H) output.h $(REGS_H) hard-reg-set.h $(FLAGS_H) $(FUNCTION_H) \
+ $(EXPR_H) $(BASIC_BLOCK_H) toplev.h $(TM_P_H) except.h reload.h
ddg.o : ddg.c $(DDG_H) $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TARGET_H) \
toplev.h $(RTL_H) $(TM_P_H) $(REGS_H) $(FUNCTION_H) \
$(FLAGS_H) insn-config.h $(INSN_ATTR_H) except.h $(RECOG_H) \
pretty-print.o: $(CONFIG_H) $(SYSTEM_H) coretypes.h intl.h $(PRETTY_PRINT_H) \
$(TREE_H)
errors.o : errors.c $(CONFIG_H) $(SYSTEM_H) errors.h $(BCONFIG_H)
+lower-subreg.o : lower-subreg.c $(CONFIG_H) $(SYSTEM_H) coretypes.h \
+ $(MACHMODE_H) $(TM_H) $(RTL_H) $(TM_P_H) $(TIMEVAR_H) $(FLAGS_H) \
+ insn-config.h $(BASIC_BLOCK_H) $(RECOG_H) $(OBSTACK_H) bitmap.h \
+ $(EXPR_H) $(REGS_H) tree-pass.h
$(out_object_file): $(out_file) $(CONFIG_H) coretypes.h $(TM_H) $(TREE_H) \
$(RTL_H) $(REGS_H) hard-reg-set.h insn-config.h conditions.h \
# The "; @true" construct forces Make to recheck the timestamp on the
# target file.
-simple_generated_h = insn-attr.h insn-codes.h insn-config.h insn-flags.h
+simple_generated_h = insn-attr.h insn-codes.h insn-config.h insn-flags.h
simple_generated_c = insn-attrtab.c insn-automata.c insn-emit.c \
insn-extract.c insn-opinit.c insn-output.c \
$(srcdir)/real.h $(srcdir)/varray.h $(srcdir)/insn-addr.h $(srcdir)/hwint.h \
$(srcdir)/ipa-reference.h $(srcdir)/output.h \
$(srcdir)/cselib.h $(srcdir)/basic-block.h $(srcdir)/cgraph.h \
- $(srcdir)/c-common.h $(srcdir)/c-tree.h $(srcdir)/reload.h \
+ $(srcdir)/reload.h \
$(srcdir)/alias.c $(srcdir)/bitmap.c $(srcdir)/cselib.c $(srcdir)/cgraph.c \
$(srcdir)/ipa-prop.c $(srcdir)/ipa-cp.c $(srcdir)/ipa-inline.c \
$(srcdir)/dbxout.c $(srcdir)/dwarf2out.c $(srcdir)/dwarf2asm.c \
- $(srcdir)/dojump.c $(srcdir)/tree-profile.c \
+ $(srcdir)/dojump.c \
$(srcdir)/emit-rtl.c $(srcdir)/except.c $(srcdir)/explow.c $(srcdir)/expr.c \
$(srcdir)/function.c $(srcdir)/except.h \
$(srcdir)/gcse.c $(srcdir)/integrate.c $(srcdir)/lists.c $(srcdir)/optabs.c \
$(srcdir)/sdbout.c $(srcdir)/stor-layout.c \
$(srcdir)/stringpool.c $(srcdir)/tree.c $(srcdir)/varasm.c \
$(srcdir)/tree-mudflap.c $(srcdir)/tree-flow.h \
- $(srcdir)/c-objc-common.c $(srcdir)/c-common.c $(srcdir)/c-parser.c \
$(srcdir)/tree-ssanames.c $(srcdir)/tree-eh.c $(srcdir)/tree-ssa-address.c \
$(srcdir)/tree-phinodes.c $(srcdir)/tree-cfg.c \
$(srcdir)/tree-dfa.c $(srcdir)/tree-ssa-propagate.c \
$(srcdir)/tree-profile.c $(srcdir)/tree-nested.c \
$(srcdir)/ipa-reference.c $(srcdir)/tree-ssa-structalias.h \
$(srcdir)/tree-ssa-structalias.c \
- $(srcdir)/c-pragma.h $(srcdir)/omp-low.c $(srcdir)/varpool.c \
- $(srcdir)/targhooks.c $(out_file) $(srcdir)/passes.c\
+ $(srcdir)/omp-low.c $(srcdir)/varpool.c \
+ $(srcdir)/targhooks.c $(out_file) $(srcdir)/passes.c \
@all_gtfiles@
-GTFILES_FILES_LANGS = @all_gtfiles_files_langs@
-GTFILES_FILES_FILES = @all_gtfiles_files_files@
-GTFILES_LANG_DIR_NAMES = @subdirs@
-GTFILES_SRCDIR = @srcdir@
-
-GTFILES_FILES_FILES_C = $(subst $(srcdir)/,, \
- $(filter %.c, $(GTFILES_FILES_FILES)))
-GTFILES_FILES_FILES_H = $(addprefix gt-, \
- $(subst /,-,$(GTFILES_FILES_FILES_C:.c=.h)))
-GTFILES_LANG_DIR_NAMES_H = $(foreach d,$(GTFILES_LANG_DIR_NAMES), gtype-$(d).h)
-ALL_GTFILES_H := $(sort $(GTFILES_FILES_FILES_H) $(GTFILES_LANG_DIR_NAMES_H))
-
-$(ALL_GTFILES_H) : s-gtype ; @true
-
-
-gt-cgraph.h gt-coverage.h gtype-desc.h gtype-desc.c gt-except.h \
-gt-function.h gt-integrate.h gt-tree.h gt-varasm.h \
-gt-emit-rtl.h gt-explow.h gt-stor-layout.h gt-regclass.h \
-gt-lists.h gt-alias.h gt-cselib.h gt-gcse.h \
-gt-expr.h gt-sdbout.h gt-optabs.h gt-bitmap.h gt-dojump.h \
-gt-dwarf2out.h gt-dwarf2asm.h \
-gt-dbxout.h \
-gtype-c.h gt-cfglayout.h \
-gt-tree-mudflap.h gt-tree-vect-generic.h \
-gt-tree-profile.h gt-tree-ssa-address.h \
-gt-tree-iterator.h gt-gimplify.h \
-gt-tree-phinodes.h gt-tree-nested.h \
-gt-tree-ssa-propagate.h gt-varpool.h \
-gt-tree-ssa-structalias.h gt-ipa-inline.h gt-passes.h \
-gt-stringpool.h gt-targhooks.h gt-omp-low.h : s-gtype ; @true
-
-define echo_quoted_to_gtyp
- echo "\"$(gtyp)\", " >> tmp-gtyp.h
+GTFILES_H = $(subst /,-, $(subst $(srcdir)/,gt-, $(subst .c,.h, \
+ $(filter %.c, $(GTFILES)))))
+
+GTFILES_LANG_H = $(patsubst [%], gtype-%.h, $(filter [%], $(GTFILES)))
+ALL_GTFILES_H := $(sort $(GTFILES_H) $(GTFILES_LANG_H))
+
+# $(GTFILES) may be too long to put on a command line, so we have to
+# write it out to a file (taking care not to do that in a way that
+# overflows a command line!) and then have gengtype read the file in.
+# The extra blank line in this definition is crucial: it makes the
+# $(foreach ...) below expand to many lines instead of one.
+
+define echo_to_gi.list
+echo '$(gtyp)' >> tmp-gi.list
endef
-gtyp-gen.h: s-gtyp-gen ; @true
-s-gtyp-gen: Makefile
- echo "/* This file is machine generated. Do not edit. */" > tmp-gtyp.h
- echo "static const char *const srcdir = " >> tmp-gtyp.h
- echo "\"$(GTFILES_SRCDIR)\"" >> tmp-gtyp.h
- echo ";" >> tmp-gtyp.h
- echo "static const char *const lang_files[] = {" >> tmp-gtyp.h
- $(foreach gtyp,$(GTFILES_FILES_FILES),$(echo_quoted_to_gtyp))
- echo "NULL};" >> tmp-gtyp.h
- echo "static const char *const langs_for_lang_files[] = {" >> tmp-gtyp.h
- $(foreach gtyp,$(GTFILES_FILES_LANGS),$(echo_quoted_to_gtyp))
- echo "NULL};" >> tmp-gtyp.h
- echo "static const char *const all_files[] = {" >> tmp-gtyp.h
- $(foreach gtyp,$(GTFILES),$(echo_quoted_to_gtyp))
- echo " NULL};" >> tmp-gtyp.h
- echo "static const char *const lang_dir_names[] = { \"c\", " >> tmp-gtyp.h
- $(foreach gtyp,$(GTFILES_LANG_DIR_NAMES),$(echo_quoted_to_gtyp))
- echo "NULL};" >> tmp-gtyp.h
- $(SHELL) $(srcdir)/../move-if-change tmp-gtyp.h gtyp-gen.h
- $(STAMP) s-gtyp-gen
-
-s-gtype: build/gengtype$(build_exeext) $(GTFILES)
- $(RUN_GEN) build/gengtype$(build_exeext)
+$(ALL_GTFILES_H) gtype-desc.c gtype-desc.h : s-gtype ; @true
+
+gtyp-input.list: s-gtyp-input ; @true
+s-gtyp-input: Makefile
+ $(foreach gtyp, $(GTFILES), $(echo_to_gi.list))
+ $(SHELL) $(srcdir)/../move-if-change tmp-gi.list gtyp-input.list
+ $(STAMP) s-gtyp-input
+
+s-gtype: build/gengtype$(build_exeext) $(filter-out [%], $(GTFILES)) \
+ gtyp-input.list
+ $(RUN_GEN) build/gengtype$(build_exeext) $(srcdir) gtyp-input.list
$(STAMP) s-gtype
#\f
build/genflags.o : genflags.c $(RTL_BASE_H) $(OBSTACK_H) $(BCONFIG_H) \
$(SYSTEM_H) coretypes.h $(GTM_H) errors.h gensupport.h
build/gengenrtl.o : gengenrtl.c $(BCONFIG_H) $(SYSTEM_H) rtl.def
-build/gengtype-lex.o : gengtype-lex.c gengtype.h gengtype-yacc.h \
- $(BCONFIG_H) coretypes.h $(GTM_H) $(SYSTEM_H) vec.h
-build/gengtype-yacc.o : gengtype-yacc.c gengtype.h $(BCONFIG_H) \
- $(SYSTEM_H) coretypes.h $(GTM_H)
-build/gengtype.o : gengtype.c $(BCONFIG_H) $(SYSTEM_H) coretypes.h \
- $(GTM_H) gengtype.h gtyp-gen.h rtl.def insn-notes.def errors.h
+build/gengtype-lex.o : gengtype-lex.c gengtype.h $(BCONFIG_H) $(SYSTEM_H)
+build/gengtype-parse.o : gengtype-parse.c gengtype.h $(BCONFIG_H) \
+ $(SYSTEM_H)
+build/gengtype.o : gengtype.c $(BCONFIG_H) $(SYSTEM_H) gengtype.h \
+ rtl.def insn-notes.def errors.h
build/genmddeps.o: genmddeps.c $(BCONFIG_H) $(SYSTEM_H) coretypes.h \
$(GTM_H) $(RTL_BASE_H) errors.h gensupport.h
build/genmodes.o : genmodes.c $(BCONFIG_H) $(SYSTEM_H) errors.h \
# These programs are not linked with the MD reader.
build/gengenrtl$(build_exeext) : $(BUILD_ERRORS)
build/genmodes$(build_exeext) : $(BUILD_ERRORS)
-build/gengtype$(build_exeext) : build/gengtype-lex.o \
- build/gengtype-yacc.o $(BUILD_ERRORS)
+build/gengtype$(build_exeext) : build/gengtype-lex.o build/gengtype-parse.o \
+ $(BUILD_ERRORS)
# Generated source files for gengtype.
gengtype-lex.c : gengtype-lex.l
-$(FLEX) $(FLEXFLAGS) -o$@ $<
-# This is a pattern rule solely so that Make knows it need not run the
-# command twice. The modifier to $@ ensures that Bison is asked to
-# produce a .c file, whether or not Make decides it needs the .h file
-# first.
-gengtype-y%.c gengtype-y%.h: gengtype-y%.y
- -$(BISON) $(BISONFLAGS) -d -o $(@:.h=.c) $<
#\f
# Remake internationalization support.
PREPROCESSOR_DEFINES = \
-DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
+ -DFIXED_INCLUDE_DIR=\"$(libsubdir)/include-fixed\" \
-DGPLUSPLUS_INCLUDE_DIR=\"$(gcc_gxx_include_dir)\" \
-DGPLUSPLUS_TOOL_INCLUDE_DIR=\"$(gcc_gxx_include_dir)/$(target_noncanonical)\" \
-DGPLUSPLUS_BACKWARD_INCLUDE_DIR=\"$(gcc_gxx_include_dir)/backward\" \
-DLOCAL_INCLUDE_DIR=\"$(local_includedir)\" \
-DCROSS_INCLUDE_DIR=\"$(CROSS_SYSTEM_HEADER_DIR)\" \
-DTOOL_INCLUDE_DIR=\"$(gcc_tooldir)/include\" \
- -DPREFIX=\"$(prefix)\" \
+ -DPREFIX=\"$(prefix)/\" \
+ -DSTANDARD_EXEC_PREFIX=\"$(libdir)/gcc/\" \
@TARGET_SYSTEM_ROOT_DEFINE@
cppdefault.o: cppdefault.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
./protoize -N -B ./ -x getopt.h -c "-B./ -Wall -Wwrite-strings \
$(GCC_CFLAGS) $(INCLUDES) \
-DGCC_INCLUDE_DIR=0 \
+ -DFIXED_INCLUDE_DIR=0 \
-DGPLUSPLUS_INCLUDE_DIR=0 \
-DCROSS_INCLUDE_DIR=0 \
-DTOOL_INCLUDE_DIR=0 \
./unprotoize -N -x getopt.h -c "-B./ -Wall -Wwrite-strings \
$(GCC_CFLAGS) $(INCLUDES) \
-DGCC_INCLUDE_DIR=0 \
+ -DFIXED_INCLUDE_DIR=0 \
-DGPLUSPLUS_INCLUDE_DIR=0 \
-DCROSS_INCLUDE_DIR=0 \
-DTOOL_INCLUDE_DIR=0 \
gcov-dump$(exeext): $(GCOV_DUMP_OBJS) $(LIBDEPS)
$(CC) $(ALL_CFLAGS) $(LDFLAGS) $(GCOV_DUMP_OBJS) $(LIBS) -o $@
#\f
-# Build the include directory. The stamp files are stmp-* rather than
+# Build the include directories. The stamp files are stmp-* rather than
# s-* so that mostlyclean does not force the include directory to
# be rebuilt.
-# Build the include directory
-stmp-int-hdrs: $(STMP_FIXINC) $(USER_H) xlimits.h $(UNWIND_H)
+# Build the include directories.
+stmp-int-hdrs: $(STMP_FIXINC) $(USER_H) $(UNWIND_H)
# Copy in the headers provided with gcc.
# The sed command gets just the last file name component;
# this is necessary because VPATH could add a dirname.
# Using basename would be simpler, but some systems don't have it.
# The touch command is here to workaround an AIX/Linux NFS bug.
-if [ -d include ] ; then true; else mkdir include; chmod a+rx include; fi
+ -if [ -d include-fixed ] ; then true; else mkdir include-fixed; chmod a+rx include-fixed; fi
for file in .. $(USER_H); do \
if [ X$$file != X.. ]; then \
realfile=`echo $$file | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
chmod a+r include/$$realfile; \
fi; \
done
- rm -f include/limits.h
- cp xlimits.h include/limits.h
rm -f include/unwind.h
cp $(UNWIND_H) include/unwind.h
- chmod a+r include/limits.h
+ set -e; for ml in `cat fixinc_list`; do \
+ sysroot_headers_suffix=`echo $${ml} | sed -e 's/;.*$$//'`; \
+ multi_dir=`echo $${ml} | sed -e 's/^[^;]*;//'`; \
+ fix_dir=include-fixed$${multi_dir}; \
+ if $(LIMITS_H_TEST) ; then \
+ cat $(srcdir)/limitx.h $(srcdir)/glimits.h $(srcdir)/limity.h > tmp-xlimits.h; \
+ else \
+ cat $(srcdir)/glimits.h > tmp-xlimits.h; \
+ fi; \
+ $(mkinstalldirs) $${fix_dir}; \
+ chmod a+rx $${fix_dir} || true; \
+ rm -f $${fix_dir}/limits.h; \
+ mv tmp-xlimits.h $${fix_dir}/limits.h; \
+ chmod a+r $${fix_dir}/limits.h; \
+ done
# Install the README
- rm -f include/README
- cp $(srcdir)/../fixincludes/README-fixinc include/README
- chmod a+r include/README
+ rm -f include-fixed/README
+ cp $(srcdir)/../fixincludes/README-fixinc include-fixed/README
+ chmod a+r include-fixed/README
$(STAMP) $@
.PHONY: install-gcc-tooldir
$(mkinstalldirs) $(DESTDIR)$(gcc_tooldir)
macro_list: s-macro_list; @true
-s-macro_list : $(GCC_PASSES)
+s-macro_list : $(GCC_PASSES)
echo | $(GCC_FOR_TARGET) -E -dM - | \
sed -n -e 's/^#define \([^_][a-zA-Z0-9_]*\).*/\1/p' \
-e 's/^#define \(_[^_A-Z][a-zA-Z0-9_]*\).*/\1/p' | \
$(SHELL) $(srcdir)/../move-if-change tmp-macro_list macro_list
$(STAMP) s-macro_list
+fixinc_list: s-fixinc_list; @true
+s-fixinc_list : $(GCC_PASSES)
+# Build up a list of multilib directories and corresponding sysroot
+# suffixes, in form sysroot;multilib.
+ if $(GCC_FOR_TARGET) -print-sysroot-headers-suffix > /dev/null 2>&1; then \
+ set -e; for ml in `$(GCC_FOR_TARGET) -print-multi-lib`; do \
+ multi_dir=`echo $${ml} | sed -e 's/;.*$$//'`; \
+ flags=`echo $${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
+ sfx=`$(GCC_FOR_TARGET) $${flags} -print-sysroot-headers-suffix`; \
+ if [ "$${multi_dir}" = "." ]; \
+ then multi_dir=""; \
+ else \
+ multi_dir=/$${multi_dir}; \
+ fi; \
+ echo "$${sfx};$${multi_dir}"; \
+ done; \
+ else \
+ echo ";"; \
+ fi > tmp-fixinc_list
+ $(SHELL) $(srcdir)/../move-if-change tmp-fixinc_list fixinc_list
+ $(STAMP) s-fixinc_list
+
# The line below is supposed to avoid accidentally matching the
# built-in suffix rule `.o:' to build fixincl out of fixincl.o. You'd
# expect fixincl to be newer than fixincl.o, such that this situation
# Build fixed copies of system files.
# Abort if no system headers available, unless building a crosscompiler.
# FIXME: abort unless building --without-headers would be more accurate and less ugly
-stmp-fixinc: gsyslimits.h macro_list \
+stmp-fixinc: gsyslimits.h macro_list fixinc_list \
$(build_objdir)/fixincludes/fixincl \
$(build_objdir)/fixincludes/fixinc.sh
- @if ! $(inhibit_libc) && test ! -d ${SYSTEM_HEADER_DIR}; then \
- echo The directory that should contain system headers does not exist: >&2 ; \
- echo " ${SYSTEM_HEADER_DIR}" >&2 ; \
- tooldir_sysinc=`echo "${gcc_tooldir}/sys-include" | sed -e :a -e "s,[^/]*/\.\.\/,," -e ta`; \
- if test "x${SYSTEM_HEADER_DIR}" = "x$${tooldir_sysinc}"; \
- then sleep 1; else exit 1; fi; \
- fi
- rm -rf include; mkdir include
- -chmod a+rx include
+ rm -rf include-fixed; mkdir include-fixed
+ -chmod a+rx include-fixed
if [ -d ../prev-gcc ]; then \
cd ../prev-gcc && \
$(MAKE) real-$(INSTALL_HEADERS_DIR) DESTDIR=`pwd`/../gcc/ \
libsubdir=. ; \
else \
- (TARGET_MACHINE='$(target)'; srcdir=`cd $(srcdir); ${PWD_COMMAND}`; \
- SHELL='$(SHELL)'; MACRO_LIST=`${PWD_COMMAND}`/macro_list ; \
- export TARGET_MACHINE srcdir SHELL MACRO_LIST && \
- cd $(build_objdir)/fixincludes && \
- $(SHELL) ./fixinc.sh ../../gcc/include \
- $(SYSTEM_HEADER_DIR) $(OTHER_FIXINCLUDES_DIRS) ); \
- rm -f include/syslimits.h; \
- if [ -f include/limits.h ]; then \
- mv include/limits.h include/syslimits.h; \
- else \
- cp $(srcdir)/gsyslimits.h include/syslimits.h; \
- fi; \
+ set -e; for ml in `cat fixinc_list`; do \
+ sysroot_headers_suffix=`echo $${ml} | sed -e 's/;.*$$//'`; \
+ multi_dir=`echo $${ml} | sed -e 's/^[^;]*;//'`; \
+ fix_dir=include-fixed$${multi_dir}; \
+ if ! $(inhibit_libc) && test ! -d ${SYSTEM_HEADER_DIR}; then \
+ echo The directory that should contain system headers does not exist: >&2 ; \
+ echo " ${SYSTEM_HEADER_DIR}" >&2 ; \
+ tooldir_sysinc=`echo "${gcc_tooldir}/sys-include" | sed -e :a -e "s,[^/]*/\.\.\/,," -e ta`; \
+ if test "x${SYSTEM_HEADER_DIR}" = "x$${tooldir_sysinc}"; \
+ then sleep 1; else exit 1; fi; \
+ fi; \
+ $(mkinstalldirs) $${fix_dir}; \
+ chmod a+rx $${fix_dir} || true; \
+ (TARGET_MACHINE='$(target)'; srcdir=`cd $(srcdir); ${PWD_COMMAND}`; \
+ SHELL='$(SHELL)'; MACRO_LIST=`${PWD_COMMAND}`/macro_list ; \
+ export TARGET_MACHINE srcdir SHELL MACRO_LIST && \
+ cd $(build_objdir)/fixincludes && \
+ $(SHELL) ./fixinc.sh ../../gcc/$${fix_dir} \
+ $(SYSTEM_HEADER_DIR) $(OTHER_FIXINCLUDES_DIRS) ); \
+ rm -f $${fix_dir}/syslimits.h; \
+ if [ -f $${fix_dir}/limits.h ]; then \
+ mv $${fix_dir}/limits.h $${fix_dir}/syslimits.h; \
+ else \
+ cp $(srcdir)/gsyslimits.h $${fix_dir}/syslimits.h; \
+ fi; \
+ chmod a+r $${fix_dir}/syslimits.h; \
+ done; \
fi
- chmod a+r include/syslimits.h
$(STAMP) stmp-fixinc
# Files related to the fixproto script.
# stmp-int-hdrs is to make sure fixincludes has already finished.
# The if statement is so that we don't run fixproto a second time
-# if it has already been run on the files in `include'.
-stmp-fixproto: fixhdr.ready fixproto stmp-int-hdrs
- if [ -f include/fixed ] ; then true; \
- else \
- : This line works around a 'make' bug in BSDI 1.1.; \
- FIXPROTO_DEFINES="$(FIXPROTO_DEFINES)"; export FIXPROTO_DEFINES; \
- FIX_HEADER="build/fix-header$(build_exeext)"; export FIX_HEADER; \
- mkinstalldirs="$(mkinstalldirs)"; \
- export mkinstalldirs; \
- if [ -d "$(SYSTEM_HEADER_DIR)" ]; then \
- $(SHELL) ${srcdir}/fixproto include include $(SYSTEM_HEADER_DIR); \
- if [ $$? -eq 0 ] ; then true ; else exit 1 ; fi ; \
- else true; fi; \
- $(STAMP) include/fixed; \
- fi
+# if it has already been run on the files in `include-fixed'.
+stmp-fixproto: fixhdr.ready fixproto fixinc_list stmp-int-hdrs
+ set -e; for ml in `cat fixinc_list`; do \
+ sysroot_headers_suffix=`echo $${ml} | sed -e 's/;.*$$//'`; \
+ multi_dir=`echo $${ml} | sed -e 's/^[^;]*;//'`; \
+ fix_dir=include-fixed$${multi_dir}; \
+ if [ -f $${fix_dir}/fixed ] ; then true; \
+ else \
+ : This line works around a 'make' bug in BSDI 1.1.; \
+ FIXPROTO_DEFINES="$(FIXPROTO_DEFINES)"; export FIXPROTO_DEFINES; \
+ FIX_HEADER="build/fix-header$(build_exeext)"; export FIX_HEADER; \
+ mkinstalldirs="$(mkinstalldirs)"; \
+ export mkinstalldirs; \
+ if [ -d "$(SYSTEM_HEADER_DIR)" ]; then \
+ $(SHELL) ${srcdir}/fixproto $${fix_dir} $${fix_dir} $(SYSTEM_HEADER_DIR); \
+ if [ $$? -eq 0 ] ; then true ; else exit 1 ; fi ; \
+ else true; fi; \
+ $(STAMP) $${fix_dir}/fixed; \
+ fi; \
+ done
$(STAMP) stmp-fixproto
# We can't run fixproto (it's being built for a different host), but we still
sourcebuild.texi gty.texi libgcc.texi cfg.texi tree-ssa.texi \
loop.texi
-TEXI_GCCINSTALL_FILES = install.texi install-old.texi fdl.texi
+TEXI_GCCINSTALL_FILES = install.texi install-old.texi fdl.texi \
+ gcc-common.texi gcc-vers.texi
TEXI_CPPINT_FILES = cppinternals.texi gcc-common.texi gcc-vers.texi
doc/gccinstall.dvi: $(TEXI_GCCINSTALL_FILES)
$(TEXI2DVI) -I . -I $(abs_docdir) -I $(abs_docdir)/include -o $@ $<
-pdf:: doc/gcc.pdf doc/gccint.pdf doc/gccinstall.pdf doc/cpp.pdf \
- doc/cppinternals.pdf lang.pdf
+PDFFILES = doc/gcc.pdf doc/gccint.pdf doc/gccinstall.pdf doc/cpp.pdf \
+ doc/cppinternals.pdf
+
+pdf:: $(PDFFILES) lang.pdf
doc/%.pdf: %.texi
$(TEXI2PDF) -I . -I $(abs_docdir) -I $(abs_docdir)/include -o $@ $<
# Delete build programs
-rm -f build/*
-rm -f mddeps.mk
-# Delete the temp files made in the course of building libgcc.a.
- -rm -f xlimits.h
# Delete other built files.
-rm -f xsys-protos.hT
-rm -f specs.h gencheck.h options.c options.h
-rm -f gcc.vrs gcc.kys gcc.tps gcc.pgs gcc.fns
# Delete core dumps.
-rm -f core */core
-# Delete file generated for gengtype.c
- -rm -f gtyp-gen.h
+# Delete file generated for gengtype
+ -rm -f gtyp-input.list
# Delete files generated by gengtype.c
-rm -f gtype-*
-rm -f gt-*
-rm -f cs-*
-rm -f doc/*.dvi
-rm -f doc/*.pdf
-# Delete the include directory.
- -rm -rf include
+# Delete the include directories.
+ -rm -rf include include-fixed
# Delete files used by the "multilib" facility (including libgcc subdirs).
-rm -f multilib.h tmpmultilib*
-if [ "x$(MULTILIB_DIRNAMES)" != x ] ; then \
else true; fi; \
else true; fi;
+pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+
+install-pdf: $(PDFFILES) lang.install-pdf
+ @$(NORMAL_INSTALL)
+ test -z "$(pdfdir)/gcc" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)/gcc"
+ @list='$(PDFFILES)'; for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ f=$(pdf__strip_dir) \
+ echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/gcc/$$f'"; \
+ $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/gcc/$$f"; \
+ done
+
html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-
+
install-html: $(HTMLS_BUILD)
@$(NORMAL_INSTALL)
test -z "$(htmldir)" || $(mkinstalldirs) "$(DESTDIR)$(htmldir)"
# Fix symlinks to absolute paths in the installed include directory to
# point to the installed directory, not the build directory.
# Don't need to use LN_S here since we really do need ln -s and no substitutes.
- -files=`cd $(DESTDIR)$(libsubdir)/include; find . -type l -print 2>/dev/null`; \
+ -files=`cd $(DESTDIR)$(libsubdir)/include-fixed; find . -type l -print 2>/dev/null`; \
if [ $$? -eq 0 ]; then \
- dir=`cd include; ${PWD_COMMAND}`; \
+ dir=`cd include-fixed; ${PWD_COMMAND}`; \
for i in $$files; do \
- dest=`ls -ld $(DESTDIR)$(libsubdir)/include/$$i | sed -n 's/.*-> //p'`; \
+ dest=`ls -ld $(DESTDIR)$(libsubdir)/include-fixed/$$i | sed -n 's/.*-> //p'`; \
if expr "$$dest" : "$$dir.*" > /dev/null; then \
- rm -f $(DESTDIR)$(libsubdir)/include/$$i; \
- ln -s `echo $$i | sed "s|/[^/]*|/..|g" | sed 's|/..$$||'``echo "$$dest" | sed "s|$$dir||"` $(DESTDIR)$(libsubdir)/include/$$i; \
+ rm -f $(DESTDIR)$(libsubdir)/include-fixed/$$i; \
+ ln -s `echo $$i | sed "s|/[^/]*|/..|g" | sed 's|/..$$||'``echo "$$dest" | sed "s|$$dir||"` $(DESTDIR)$(libsubdir)/include-fixed/$$i; \
fi; \
done; \
fi
# Create or recreate the gcc private include file directory.
install-include-dir: installdirs
- -rm -rf $(DESTDIR)$(libsubdir)/include
- mkdir $(DESTDIR)$(libsubdir)/include
- -chmod a+rx $(DESTDIR)$(libsubdir)/include
+ $(mkinstalldirs) $(DESTDIR)$(libsubdir)/include
+ -rm -rf $(DESTDIR)$(libsubdir)/include-fixed
+ mkdir $(DESTDIR)$(libsubdir)/include-fixed
+ -chmod a+rx $(DESTDIR)$(libsubdir)/include-fixed
# Create or recreate the install-tools include file directory.
itoolsdir = $(libexecsubdir)/install-tools
# output of `cd', but some shells lose on redirection within `()'s
(cd `${PWD_COMMAND}`/include ; \
tar -cf - .; exit 0) | (cd $(DESTDIR)$(libsubdir)/include; tar xpf - )
+ (cd `${PWD_COMMAND}`/include-fixed ; \
+ tar -cf - .; exit 0) | (cd $(DESTDIR)$(libsubdir)/include-fixed; tar xpf - )
# /bin/sh on some systems returns the status of the first tar,
# and that can lose with GNU tar which always writes a full block.
# So use `exit 0' to ignore its exit status.
# See discussion about the use of `pwd` above
cd `${PWD_COMMAND}`/include ; \
find . -print | cpio -pdum $(DESTDIR)$(libsubdir)/include
+ cd `${PWD_COMMAND}`/include-fixed ; \
+ find . -print | cpio -pdum $(DESTDIR)$(libsubdir)/include-fixed
# Install the include directory using cp.
install-headers-cp: stmp-int-hdrs $(STMP_FIXPROTO) install-include-dir
cp -p -r include $(DESTDIR)$(libsubdir)
+ cp -p -r include-fixed $(DESTDIR)$(libsubdir)
# Targets without dependencies, for use in prev-gcc during bootstrap.
real-install-headers-tar:
- (cd `${PWD_COMMAND}`/include ; \
- tar -cf - .; exit 0) | (cd $(DESTDIR)$(libsubdir)/include; tar xpf - )
+ (cd `${PWD_COMMAND}`/include-fixed ; \
+ tar -cf - .; exit 0) | (cd $(DESTDIR)$(libsubdir)/include-fixed; tar xpf - )
real-install-headers-cpio:
- cd `${PWD_COMMAND}`/include ; \
- find . -print | cpio -pdum $(DESTDIR)$(libsubdir)/include
+ cd `${PWD_COMMAND}`/include-fixed ; \
+ find . -print | cpio -pdum $(DESTDIR)$(libsubdir)/include-fixed
real-install-headers-cp:
- cp -p -r include $(DESTDIR)$(libsubdir)
+ cp -p -r include-fixed $(DESTDIR)$(libsubdir)
# Install supporting files for fixincludes to be run later.
install-mkheaders: stmp-int-hdrs $(STMP_FIXPROTO) install-itoolsdirs \
- macro_list xlimits.h
- for file in $(USER_H); do \
- realfile=`echo $$file | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
- $(INSTALL_DATA) $$file \
- $(DESTDIR)$(itoolsdatadir)/include/$$realfile ; \
- done
- $(INSTALL_DATA) xlimits.h $(DESTDIR)$(itoolsdatadir)/include/limits.h
- $(INSTALL_DATA) $(UNWIND_H) $(DESTDIR)$(itoolsdatadir)/include/unwind.h
+ macro_list fixinc_list
$(INSTALL_DATA) $(srcdir)/gsyslimits.h \
$(DESTDIR)$(itoolsdatadir)/gsyslimits.h
$(INSTALL_DATA) macro_list $(DESTDIR)$(itoolsdatadir)/macro_list
- if [ x$(STMP_FIXPROTO) != x ] ; then \
- $(INSTALL_SCRIPT) $(mkinstalldirs) \
+ $(INSTALL_DATA) fixinc_list $(DESTDIR)$(itoolsdatadir)/fixinc_list
+ set -e; for ml in `cat fixinc_list`; do \
+ multi_dir=`echo $${ml} | sed -e 's/^[^;]*;//'`; \
+ $(mkinstalldirs) $(DESTDIR)$(itoolsdatadir)/include$${multi_dir}; \
+ $(INSTALL_DATA) include-fixed$${multidir}/limits.h $(DESTDIR)$(itoolsdatadir)/include$${multi_dir}/limits.h; \
+ done
+ $(INSTALL_SCRIPT) $(srcdir)/../mkinstalldirs \
$(DESTDIR)$(itoolsdir)/mkinstalldirs ; \
+ if [ x$(STMP_FIXPROTO) != x ] ; then \
$(INSTALL_SCRIPT) $(srcdir)/fixproto $(DESTDIR)$(itoolsdir)/fixproto ; \
$(INSTALL_PROGRAM) build/fix-header$(build_exeext) \
$(DESTDIR)$(itoolsdir)/fix-header$(build_exeext) ; \
else :; fi
- echo 'SYSTEM_HEADER_DIR="'"$(SYSTEM_HEADER_DIR)"'"' \
+ sysroot_headers_suffix='$${sysroot_headers_suffix}'; \
+ echo 'SYSTEM_HEADER_DIR="'"$(SYSTEM_HEADER_DIR)"'"' \
> $(DESTDIR)$(itoolsdatadir)/mkheaders.conf
echo 'OTHER_FIXINCLUDES_DIRS="$(OTHER_FIXINCLUDES_DIRS)"' \
>> $(DESTDIR)$(itoolsdatadir)/mkheaders.conf
OSDN Git Service
