-2010-04-09 Hariharan Sandanagobalane <hariharan@picochip.com>
+2010-04-13 Richard Guenther <rguenther@suse.de>
+
+ * tree-ssa-structalias.c (callused_id): Remove.
+ (call_stmt_vars): New.
+ (get_call_vi): Likewise.
+ (lookup_call_use_vi): Likewise.
+ (lookup_call_clobber_vi): Likewise.
+ (get_call_use_vi): Likewise.
+ (get_call_clobber_vi): Likewise.
+ (make_transitive_closure_constraints): Likewise.
+ (handle_const_call): Adjust to do per-call call-used handling.
+ (handle_pure_call): Likewise.
+ (find_what_var_points_to): Remove general callused handling.
+ (init_base_vars): Likewise.
+ (init_alias_vars): Initialize call_stmt_vars.
+ (compute_points_to_sets): Process call-used and call-clobbered
+ vars for call statements.
+ (delete_points_to_sets): Free call_stmt_vars.
+
+2010-04-13 Richard Guenther <rguenther@suse.de>
+
+ * tree-vect-data-refs.c (vect_analyze_data_ref_dependence):
+ Only add RW dependence for dependence distance zero.
+ Adjust maximal vectorization factor according to dependences.
+ Move alignment handling ...
+ (vect_find_same_alignment_drs): ... here. New function.
+ (vect_analyze_data_ref_dependences): Adjust.
+ (vect_analyze_data_refs_alignment): Call vect_find_same_alignment_drs.
+ (vect_analyze_data_refs): Adjust minimal vectorization factor
+ according to data references.
+ * tree-vect-loop.c (vect_analyze_loop): Analyze data-ref
+ dependences before determining the vectorization factor.
+ Analyze alignment after determining the vectorization factor.
+ * tree-vect-slp.c ((vect_slp_analyze_bb): Analyze data-ref
+ dependences before alignment.
+ * tree-vectorizer.h (vect_analyze_data_ref_dependences):
+ Adjust prototype.
+ (vect_analyze_data_refs): Likewise.
+ (MAX_VECTORIZATION_FACTOR): New define.
+
+2010-04-13 Duncan Sands <baldrick@free.fr>
+
+ * except.h (lang_eh_type_covers): Remove.
+ * except.c (lang_eh_type_covers): Likewise.
+
+2010-04-13 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
+ Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
+
+ * gcc/config/s390/s390.md: Replace TARGET_64BIT with TARGET_ZARCH.
+ * gcc/config/s390/s390.c: Replace UNTIS_PER_WORD with
+ UNITS_PER_LONG where it is ABI relevant.
+ (s390_return_addr_rtx): Likewise.
+ (s390_back_chain_rtx): Likewise.
+ (s390_frame_area): Likewise.
+ (s390_frame_info): Likewise.
+ (s390_initial_elimination_offset): Likewise.
+ (save_gprs): Likewise.
+ (s390_emit_prologue): Likewise.
+ (s390_emit_epilogue): Likewise.
+ (s390_function_arg_advance): Likewise.
+ (s390_function_arg): Likewise.
+ (s390_va_start): Likewise.
+ (s390_gimplify_va_arg): Likewise.
+ (s390_function_profiler): Likewise.
+ (s390_optimize_prologue): Likewise.
+ (s390_rtx_costs): Likewise.
+ (s390_secondary_reload): Likewise.
+ (s390_promote_function_mode): Likewise.
+ (s390_hard_regno_mode_ok): Replace TARGET_64BIT with TARGET_ZARCH.
+ (s390_scalar_mode_supported_p): Disallow TImode if no 64 bit
+ registers available.
+ (s390_unwind_word_mode): New function.
+ (s390_function_value): Split 64 bit values into register pair if
+ used as return value.
+ (s390_call_saved_register_used): Don't use HARD_REGNO_NREGS for
+ function call parameters. Handle parallels.
+ (TARGET_SCALAR_MODE_SUPPORTED_P): New macro.
+ (HARD_REGNO_CALL_PART_CLOBBERED): New macro.
+ (DWARF_CIE_DATA_ALIGNMENT): New macro.
+ (s390_expand_setmem): Remove unused variable src_addr.
+ * gcc/longlong.h: Make smul_ppmm and sdiv_qrnnd inline asms to
+ deal with 64 bit registers.
+ * gcc/config/s390/s390.h: Define __zarch__ predefined macro.
+ Replace UNITS_PER_WORD with UNITS_PER_LONG where it is ABI relevant.
+ (UNITS_PER_LONG): New macro.
+ * libjava/include/s390-signal.h: Define extended ucontext
+ structure containing the upper halfs of the 64 bit registers.
+
+2010-04-13 Simon Baldwin <simonb@google.com>
+
+ * cfgexpand.c (gimple_expand_cfg): Clarify warning message text.
+
+2010-04-13 Eric Botcazou <ebotcazou@adacore.com>
+
+ * gimple.c (walk_gimple_op) <GIMPLE_ASSIGN>: Do not request a pure
+ rvalue on the RHS if the LHS is of a non-renamable type.
+ * tree-ssa-ccp.c (maybe_fold_offset_to_component_ref): Fold result.
+
+2010-04-13 Matthias Klose <doko@ubuntu.com>
+
+ * gcc.c (cc1_options): Handle -iplugindir before processing
+ the cc1 spec. Only add -iplugindir once.
+ (cpp_unique_options): Add -iplugindir option if -fplugin* options
+ found.
+ * common.opt (iplugindir): Remove `Separate' property, initialize.
+ * plugin.c (default_plugin_dir_name): Error with missing -iplugindir
+ option.
+ * Makefile.in (check-%, check-parallel-%): Create plugin dir.
+ (distclean): Remove plugin dir.
+ * doc/invoke.texi: Document -iplugindir.
+
+2010-04-13 Basile Starynkevitch <basile@starynkevitch.net>
+
+ * doc/plugins.texi (Loading Plugins): Document short
+ -fplugin=foo option.
+ (Plugin API): Mention default_plugin_dir_name function.
+
+ * gcc.c (find_file_spec_function): Add new declaration.
+ (static_spec_func): Use it for "find-file".
+ (find_file_spec_function): Add new function.
+ (cc1_options): Add -iplugindir option if -fplugin* options found.
+
+ * gcc-plugin.h (default_plugin_dir_name): Added new declaration.
+
+ * plugin.c (add_new_plugin): Updated comment, and handle short
+ plugin name.
+ (default_plugin_dir_name): Added new function.
+
+ * common.opt (iplugindir): New option to set the plugin
+ directory.
+
+2010-04-12 Uros Bizjak <ubizjak@gmail.com>
+
+ * config/i386/i386.md (any_rotate): New code iterator.
+ (rotate_insn): New code attribute.
+ (rotate): Ditto.
+ (SWIM124): New mode iterator.
+ (<rotate_insn>ti3): New expander.
+ (<rotate_insn>di3): Macroize expander from {rotl,rotr}di3 using
+ any_rotate code iterator.
+ (<rotate_insn><mode>3) Macroize expander from {rotl,rotr}{qi,hi,si}3
+ using any_rotate code iterator and SWIM124 mode iterator.
+ (ix86_rotlti3): New insn_and_split pattern.
+ (ix86_rotrti3): Ditto.
+ (ix86_rotl<dwi>3_doubleword): Macroize insn_and_split pattern from
+ ix86_rotl{di,ti}3 patterns.
+ (ix86_rotr<dwi>3_doubleword): Ditto from ix86_rotr{di,ti}3 patterns.
+ (*<rotate_insn><mode>3_1): Merge with *{rotl,rotr}{qi,hi,si}3_1_one_bit
+ and *{rotl,rotr}di3_1_one_bit_rex64. Macroize insn from
+ *{rotl,rotr}{qi,hi,si}3_1 and *{rotl,rotr}di3_1_rex64 using any_rotate
+ code iterator and SWI mode iterator.
+ (*<rotate_insn>si3_1_zext): Merge with *{rotl,rotr}si3_1_one_bit_zext.
+ Macroize insn from {rotl,rotr}si3_1_zext using any_rotate
+ code iterator.
+ (*<rotate_insn>qi3_1_slp): Merge with *{rotl,rotr}qi3_1_one_bit_slp.
+ Macroize insn from {rotl,rotr}qi3_1_slp using any_rotate code iterator.
+ (bswap rotatert splitter): Add splitter.
+ (bswap splitter): Macroize splitter using any_rotate code iterator.
+ Add insn predicate to split only for TARGET_USE_XCHGB or when
+ optimizing function for size.
+
+2010-04-12 Steve Ellcey <sje@cup.hp.com>
+
+ * config/pa/pa.c (emit_move_sequence): Remove use of
+ deleted variable flag_argument_noalias.
+
+2010-04-12 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
+
+ * config.gcc: Removed *-*-solaris2.7* from list of obsolete
+ configurations.
+ Add to unsupported targets list.
+ * configure.ac (gcc_cv_as_tls): Removed i[34567]86-*-solaris2.[567]*,
+ sparc*-sun-solaris2.[567]* from target lists.
+ * configure: Regenerate.
+ * doc/install.texi (Specific, *-*-solaris2*): Document Solaris 7
+ removal.
+ Remove Solaris 7 patch references.
+ (Specific, sparc-sun-solaris2.7): Removed.
+ (sparc-sun-solaris2*): Update Solaris 7 example.
+ (sparc64-*-solaris2*): Likewise.
+
+2010-04-12 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
+
+ * config.build (alpha*-dec-osf4*): Remove.
+ * config.gcc: Remove alpha*-dec-osf4*, alpha-dec-osf5.0* from list
+ of obsolete configurations.
+ (alpha*-dec-osf[45]*): Remove alpha*-dec-osf4*, alpha-dec-osf5.0*
+ support.
+ * config/alpha/t-osf4: Renamed to ...
+ * config/alpha/t-osf5: ... this.
+ * config/alpha/osf.h: Renamed to ...
+ * config/alpha/osf5.h: ... this.
+ Merged old osf5.h contents.
+ Update comments.
+ (ASM_SPEC): Use ASM_OLDAS_SPEC directly.
+ (EXTRA_SPECS): Removed.
+ * doc/install.texi (Specific, alpha*-dec-osf5.1): Renamed to
+ reflect removal of Tru64 UNIX V4.0/V5.0 support.
+ Document that.
+
+2010-04-12 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
+
+ * doc/contrib.texi (Contributors, Rainer Orth): Update.
+
+2010-04-12 Kai Tietz <kai.tietz@onevision.com>
+
+ PR/43702
+ * config/i386/i386.c (x86_this_parameter): Handle aggregate for
+ __thiscall convention.
+
+2010-04-12 Steve Ellcey <sje@cup.hp.com>
+
+ * config/pa/pa.c (hppa_legitimize_address): Remove unused variable
+ orig_base.
+ * config/pa/pa.md (call, call_value): Remove unused variable call_insn.
+
+2010-04-12 Steve Ellcey <sje@cup.hp.com>
+
+ * function.c (assign_parms_initialize_all): Add unused attribute
+ to fntype.
+
+2010-04-12 Richard Guenther <rguenther@suse.de>
+
+ * gsstruct.def (GSS_CALL): New.
+ * gimple.def (GIMPLE_CALL): Change to GSS_CALL.
+ * gimple.h: Include tree-ssa-alias.h.
+ (struct gimple_statement_call): New.
+ (union gimple_statement_struct_d): Add gimple_call member.
+ (gimple_call_reset_alias_info): Declare.
+ (gimple_call_use_set): New function.
+ (gimple_call_clobber_set): Likewise.
+ * Makefile.in (GIMPLE_H): Add tree-ssa-alias.h.
+ * gimple.c (gimple_call_reset_alias_info): New function.
+ (gimple_build_call_1): Call it.
+ * lto-streamer-in.c (input_gimple_stmt): Likewise.
+ * tree-inline.c (remap_gimple_stmt): Likewise.
+ (expand_call_inline): Remove callused handling.
+ * cfgexpand.c (update_alias_info_with_stack_vars): Likewise.
+ * tree-dfa.c (dump_variable): Likewise.
+ * tree-parloops.c (parallelize_loops): Likewise.
+ * tree-ssa.c (init_tree_ssa): Likewise.
+ (delete_tree_ssa): Likewise.
+ * tree-flow-inline.h (is_call_used): Remove.
+ * tree-flow.h (struct gimple_df): Remove callused member.
+ * tree-nrv.c (dest_safe_for_nrv_p): Adjust predicate.
+ * tree-ssa-alias.c (dump_alias_info): Remove callused handling.
+ (ref_maybe_used_by_call_p_1): Simplify.
+ (call_may_clobber_ref_p_1): Likewise.
+ * tree-ssa-structalias.c (compute_points_to_sets): Set
+ the call stmt used and clobbered sets.
+ * tree-tailcall.c (suitable_for_tail_opt_p): Adjust predicate.
+ (find_tail_calls): Verify the tail call.
+
+2010-04-12 Richard Guenther <rguenther@suse.de>
+
+ * ipa.c (cgraph_postorder): Adjust postorder to guarantee
+ single-iteration always-inline inlining.
+ * ipa-inline.c (cgraph_mark_inline): Do not return anything.
+ (cgraph_decide_inlining): Do not handle always-inline specially.
+ (try_inline): Remove always-inline cycle detection special case.
+ Do not recurse on always-inlines.
+ (cgraph_early_inlining): Do not iterate if not optimizing.
+ (cgraph_gate_early_inlining): remove.
+ (pass_early_inline): Run unconditionally.
+ (gate_cgraph_decide_inlining): New function.
+ (pass_ipa_inline): Use it. Do not run the IPA inliner if
+ not inlining or optimizing.
+ (cgraph_decide_inlining_of_small_functions): Also consider
+ always-inline functions.
+ (cgraph_default_inline_p): Return true for nodes which should
+ disregard inline limits.
+ (estimate_function_body_sizes): Assume zero size and time for
+ nodes which are marked as disregarding inline limits.
+ (cgraph_decide_recursive_inlining): Do not perform recursive
+ inlining on always-inline nodes.
+
+2010-04-12 Jakub Jelinek <jakub@redhat.com>
+
+ PR bootstrap/43699
+ * c-typeck.c (c_process_expr_stmt): Call mark_exp_read even
+ for exprs satisfying handled_component_p.
+
+2010-04-12 Eric Botcazou <ebotcazou@adacore.com>
+
+ * expr.c (categorize_ctor_elements_1): Properly count sub-elements of
+ non-constant aggregate elements.
+
+ * gimplify.c (gimplify_init_constructor): Do not pre-evaluate if this
+ is a real initialization.
+
+2010-04-12 Shujing Zhao <pearly.zhao@oracle.com>
+
+ PR c/36774
+ * c-decl.c (start_function): Move forward check for nested function.
+
+2010-04-11 Kaz Kojima <kkojima@gcc.gnu.org>
+
+ * config/sh/sh-protos.h (sh_legitimize_reload_address): Declare.
+ * config/sh/sh.c: Include reload.h.
+ (sh_legitimize_reload_address): New.
+ * config/sh/sh.h (LEGITIMIZE_RELOAD_ADDRESS): Use
+ sh_legitimize_reload_address.
+
+2010-04-11 Kaushik Phatak <kaushik.phatak@kpitcummins.com>
+
+ * config/sh/sh.md (*movqi_pop): New insn pattern.
+ * config/sh/predicates.md (sh_no_delay_pop_operand): New predicate.
+
+2010-04-11 Uros Bizjak <ubizjak@gmail.com>
+
+ * config/i386/i386.md (any_shiftrt): New code iterator.
+ (shiftrt_insn): New code attribute.
+ (shiftrt): Ditto.
+ (<shiftrt_insn><mode>3): Macroize expander from {ashr,lshr}<mode>3
+ using any_shiftrt code iterator.
+ (*<shiftrt_insn><mode>3_doubleword): Macroize insn_and_split from
+ *{ashr,lshr}<mode>3_doubleword using any_shiftrt code iterator.
+ (*<shiftrt_insn><mode>3_doubleword peephole2): Macroize peephole2
+ pattern from corresponding peephole2 patterns.
+ (*<shiftrt_insn><mode>3_1): Macroize insn from *{ashr,lshr}<mode>3_1
+ using any_shiftrt code iterator.
+ (*<shiftrt_insn>si3_1_zext): Ditto from *{ashr,lshr}si3_1_zext.
+ (*<shiftrt_insn>qi3_1_slp): Ditto from *{ashr,lshr}qi3_1_slp.
+ (*<shiftrt_insn><mode>3_cmp): Ditto from *{ashr,lshr}<mode>3_cmp.
+ (*<shiftrt_insn><mode>3_cmp_zext): Ditto from
+ *{ashr,lshr}<mode>3_cmp_zext.
+ (*<shiftrt_insn><mode>3_cconly): Ditto from *{ashr,lshr}<mode>3_cconly.
+
+2010-04-11 Uros Bizjak <ubizjak@gmail.com>
+
+ * config/i386/i386.md (*ashr<mode>3_cconly): Fix wrong mode of
+ scratch register.
+ (*lshr<mode>3_cconly): Ditto.
+
+2010-04-11 Uros Bizjak <ubizjak@gmail.com>
+
+ * config/i386/i386.md (lshr<mode>3): Macroize expander from
+ lshr{qi,hi,si,di,ti}3_1 using SDWIM mode iterator.
+ (*lshr<mode>3_doubleword): New insn_and_split_pattern. Macroize
+ pattern from *lshr{di,ti}3_1 and corresponding splitters using
+ DWI mode iterator.
+ (*lshr<mode>3_doubleword peephole2): Macroize peephole2 pattern
+ from corresponding peephole2 patterns.
+ (*lshr<mode>3_1): Merge with *lshr{qi,hi,si}3_1_one_bit and
+ *lshrdi3_1_one_bit_rex64. Macroize insn from *lshr{qi,hi,si}3_1
+ and *lshrdi3_1_rex64 using SWI mode iterator.
+ (*lshrsi3_1_zext): Merge with *lshrsi3_1_one_bit_zext.
+ (*lshrqi3_1_slp): Merge with *lshrqi3_1_one_bit_slp.
+ (*lshr<mode>3_cmp): Merge with *lshr{qi,hi,si}3_one_bit_cmp and
+ *lshrdi3_one_bit_cmp_rex64. Macroize insn from *lshr{qi,hi,si}3_cmp
+ and *lshrdi3_cmp_rex64 using SWI mode iterator.
+ (*lshrsi3_cmp_zext): Merge with *lshrsi3_cmp_one_bit_zext.
+ (*lshr<mode>3_cconly): Merge with *lshr{qi,hi,si}3_one_bit_cconly and
+ *lshrdi3_one_bit_cconly_rex64. Macroize insn from
+ *lshr{qi,hi,si}3_cconly and *lshrdi3_cconly_rex64 using
+ SWI mode iterator.
+
+2010-04-10 Uros Bizjak <ubizjak@gmail.com>
+
+ * config/i386/i386.md (ashr<mode>3): Macroize expander from
+ ashr{qi,hi,si,di,ti}3_1 using SDWIM mode iterator.
+ (*ashr<mode>3_doubleword): New insn_and_split_pattern. Macroize
+ pattern from *ashr{di,ti}3_1 and corresponding splitters using
+ DWI mode iterator.
+ (*ashr<mode>3_doubleword peephole2): Macroize peephole2 pattern
+ from corresponding peephole2 patterns.
+ (ashrdi3_cvt): Rename from ashrdi3_63_rex64.
+ (ashrsi3_cvt): Rename from ashrsi3_31.
+ (*ashrsi3_cvt_zext): Rename from *ashrsi3_31_zext.
+ (x86_shift<mode>_adj_3): Macroize expander from x86_shift_adj_3
+ and x86_64_shift_adj_3 using SWI48 mode iterator.
+ (*ashr<mode>3_1): Merge with *ashr{qi,hi,si}3_1_one_bit and
+ *ashrdi3_1_one_bit_rex64. Macroize insn from *ashr{qi,hi,si}3_1
+ and *ashrdi3_1_rex64 using SWI mode iterator.
+ (*ashrsi3_1_zext): Merge with *ashrsi3_1_one_bit_zext.
+ (*ashrqi3_1_slp): Merge with *ashrqi3_1_one_bit_slp.
+ (*ashr<mode>3_cmp): Merge with *ashr{qi,hi,si}3_one_bit_cmp and
+ *ashrdi3_one_bit_cmp_rex64. Macroize insn from *ashr{qi,hi,si}3_cmp
+ and *ashrdi3_cmp_rex64 using SWI mode iterator.
+ (*ashrsi3_cmp_zext): Merge with *ashrsi3_cmp_one_bit_zext.
+ (*ashr<mode>3_cconly): Merge with *ashr{qi,hi,si}3_one_bit_cconly and
+ *ashrdi3_one_bit_cconly_rex64. Macroize insn from
+ *ashr{qi,hi,si}3_cconly and *ashrdi3_cconly_rex64 using
+ SWI mode iterator.
+ (sign_extend splitters): Update for renamed ashr{di,si}3_cvt patterns.
+ * config/i386/i386.c (ix86_split_ashr): Update for renamed
+ x86_shift<mode>_adj_3 expanders.
+
+2010-04-10 Wei Guozhi <carrot@google.com>
+
+ PR target/42601
+ * config/arm/arm.c (arm_pic_static_addr): New function.
+ (legitimize_pic_address): Call arm_pic_static_addr when it detects
+ a static symbol.
+ (arm_output_addr_const_extra): Output expression for new pattern.
+ * config/arm/arm.md (UNSPEC_SYMBOL_OFFSET): New unspec symbol.
+
+2010-04-10 Bernd Schmidt <bernd.schmidt@codesourcery.com>
+
+ * ira-costs.c (record_reg_classes): Ignore alternatives that are
+ not enabled.
+
+ * Makefile.in (web.o): Depend on insn-config.h and $(RECOG_H).
+ * web.c: Include "insn-config.h" and "recog.h".
+ (union_match_dups): New function.
+ (web_main): Call it.
+ (union_defs): Don't try to recognize match_dups.
+
+ * reload1.c (eliminate_regs_in_insn): Don't restore an operand
+ if doing so would replace the entire pattern.
+
+2010-04-09 Uros Bizjak <ubizjak@gmail.com>
+
+ PR target/43707
+ PR target/43709
+ * config/i386/i386.md (*ashl<mode>3_doubleword): Split to insn
+ and splitter pattern. Change splitter operand 1 predicate to
+ nonmemory_operand.
+
+2010-04-09 Martin Jambor <mjambor@suse.cz>
- * config/picochip/picochip.c (picochip_rtx_costs): Use correct function
- template.
- (picochip_override_options): Enable section anchors only above O1.
+ * ipa-cp.c (ipcp_lats_are_equal): Return true also if the two
+ lattices are addresses of CONST_DECLs with the same initial value.
+ (ipcp_print_all_lattices): Print values of CONST_DECLs.
+ * ipa-prop.c (ipa_print_node_jump_functions): Likewise.
+
+2010-04-09 Eric Botcazou <ebotcazou@adacore.com>
+ Bernd Schmidt <bernd.schmidt@codesourcery.com>
+
+ * loop-invariant.c (replace_uses): New static function.
+ (move_invariant_reg): Use it to ensure we can replace the uses.
+
+2010-04-09 Hariharan Sandanagobalane <hariharan@picochip.com>
+
+ * config/picochip/picochip.c (picochip_rtx_costs): Use correct
+ function template.
+ (picochip_override_options): Enable section anchors only above -O1.
(picochip_reorg): Fixed a couple of build warnings.
2010-04-09 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
2010-04-09 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
- * config/sparc/sol2-gld.h: Remove SPARC reference.
- Rename ...
+ * config/sparc/sol2-gld.h: Remove SPARC reference. Rename ...
* config/sol2-gld.h: ... here.
* config.gcc (sparc*-*-solaris2*): Reflect this.
(i[34567]86-*-solaris2*): Use it.
2010-04-09 Richard Guenther <rguenther@suse.de>
- * tree-pretty-print.c (dump_generic_node): Dump
- TYPE_VECTOR_SUBPARTS.
+ * tree-pretty-print.c (dump_generic_node): Dump TYPE_VECTOR_SUBPARTS.
2010-04-09 Iain Sandoe <iains@gcc.gnu.org>
PR bootstrap/43684
- * varasm.c (default_assemble_visibility): Wrap vars that are
+ * varasm.c (default_assemble_visibility): Wrap vars that are
set, but unused, by targets without GAS.
- * config/rs6000/rs6000.c: (paired_emit_vector_compare):
+ * config/rs6000/rs6000.c: (paired_emit_vector_compare):
Remove set, but unused, vars.
(rs6000_legitimize_tls_address): Likewise.
(altivec_expand_dst_builtin): Likewise.
* config/darwin.c (machopic_classify_symbol): Likewise.
(machopic_indirection_name): Likewise.
-
+
2010-04-09 Uros Bizjak <ubizjak@gmail.com>
* config/i386/i386.md (DWI): New mode iterator.
* tree-vectorizer.h (struct _stmt_vec_info): Document
that vectype is the type of the LHS.
- (supportable_widening_operation, supportable_narrowing_operation):
+ (supportable_widening_operation, supportable_narrowing_operation):
Get both input and output vector types as arguments.
(vect_is_simple_use_1): Declare.
(get_same_sized_vectype): Likewise.
(ix86_attribute_table): Add description for thiscall attribute.
* config/i386/i386.h (ix86_args): Adjust comment for member fastcall.
* doc/extend.texi: Add documentation for thiscall.
-
+
2010-04-09 Manuel López-Ibáñez <manu@gcc.gnu.org>
PR c++/28584
* gcc.h (DEFAULT_SWITCH_TAKES_ARG): Delete -b and -V.
2010-04-08 Christian Borntraeger <borntraeger@de.ibm.com>
- Wolfgang Gellerich <gellerich@de.ibm.com>
+ Wolfgang Gellerich <gellerich@de.ibm.com>
Implement target hook for loop unrolling
* target.h (loop_unroll_adjust): Add a new target hook function.
inserting GIMPLE_NOPs into the IL.
* tree-ssa-structalias.c (get_constraint_for_component_ref):
Explicitly strip handled components and indirect references.
-
+
* fold-const.c (fold_unary_loc): Do not strip qualifiers when
folding address expressions.
* gimple.c (gimple_ior_addresses_taken_1): Use get_base_address.