+2011-03-15 Alan Modra <amodra@gmail.com>
+
+ PR target/48032
+ * config/rs6000/rs6000.c (offsettable_ok_by_alignment): Do not
+ presume symbol_refs without a symbol_ref_decl are suitably
+ aligned, nor other trees we may see here. Handle anchor symbols.
+ (legitimate_constant_pool_address_p): Comment. Add mode param.
+ Check cmodel=medium addresses. Adjust all calls.
+ (rs6000_emit_move): Don't call offsettable_ok_by_alignment on
+ creating cmodel=medium optimized access to locals.
+ * config/rs6000/constraints.md (R): Pass QImode to
+ legitimate_constant_pool_address_p.
+ * config/rs6000/predicates.md (input_operand): Pass mode to
+ legitimate_constant_pool_address_p.
+ * config/rs6000/rs6000-protos.h (legitimate_constant_pool_address_p):
+ Update prototype.
+
+2011-03-14 Michael Meissner <meissner@linux.vnet.ibm.com>
+
+ PR target/48053
+ * config/rs6000/rs6000.md (movdi split for 32-bit): Don't split up
+ 64-bit constants being loaded into registers other than GPRs such
+ as loading 0 into a VSX register.
+
+2011-03-14 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
+
+ * config/sol2.c (solaris_assemble_visibility): Remove obsolete
+ URLs.
+
+2011-03-14 Jakub Jelinek <jakub@redhat.com>
+
+ PR middle-end/47917
+ * builtins.c (fold_builtin_snprintf): New function.
+ (fold_builtin_3): Call it for BUILT_IN_SNPRINTF.
+ (fold_builtin_4): Likewise.
+
+ PR middle-end/38878
+ * fold-const.c (fold_binary_loc) <case EQ_EXPR, NE_EXPR>: Add
+ STRIP_NOPS on arg0 and arg1. When optimizing X +- C == X
+ and C - X == X also strip nops from +/-/p+ operand.
+ When optimizing -X == C, fold C to arg0's type.
+
+ PR debug/47946
+ * dwarf2out.c (add_bit_offset_attribute): If bit_offset is negative,
+ emit it as add_AT_int instead of add_AT_unsigned.
+
+2011-03-14 Tom Tromey <tromey@redhat.com>
+
+ * unwind-dw2.c: Include sys/sdt.h if it exists.
+ (_Unwind_DebugHook): Use STAP_PROBE2.
+ * config.in, configure: Rebuild.
+ * configure.ac: Check for sys/sdt.h.
+
+2011-03-14 Uros Bizjak <ubizjak@gmail.com>
+
+ * config/i386/i386.md (ROUND_FLOOR): New constant.
+ (ROUND_CEIL): Ditto.
+ (ROUND_TRUNC): Ditto.
+ (ROUND_MXCSR): Ditto.
+ (ROUND_NO_EXC): Ditto.
+ (rint<mode>2): Use new defines instead of numerical constants.
+ (floor<mode>2): Ditto.
+ (ceil<mode>2): Ditto.
+ (btrunc<mode>2): Ditto.
+ * config/i386/i386-builtin-types.def: Define ROUND function type
+ aliases.
+ * config/i386/i386.c (enum ix86_builtins): Add
+ IX86_BUILTIN_{FLOOR,CEIL,TRUNC,RINT}{PS,PD}{,256} defines.
+ (struct builtin_description): Add
+ __builtin_ia32_{floor,ceil,trunc,rint}{pd,ps}{,256} descriptions.
+ (ix86_expand_sse_round): New static function.
+ (ix86_expand_args_builtin): Call ix86_expand_sse_round for ROUND
+ function types.
+ (ix86_builtin_vectorized_function): Handle
+ BUILT_IN_{FLOOR,CEIL,TRUNC,RINT}{,F} builtins.
+
+2011-03-14 Tom Tromey <tromey@redhat.com>
+
+ * c-parser.c (c_parser_asm_string_literal): Clear
+ warn_overlength_strings.
+
+2011-03-14 Tom Tromey <tromey@redhat.com>
+
+ * c-parser.c (disable_extension_diagnostics): Save
+ warn_overlength_strings.
+ (restore_extension_diagnostics): Restore warn_overlength_strings.
+
+2011-03-14 Jakub Jelinek <jakub@redhat.com>
+
+ * BASE-VER: Change to 4.7.0.
+
+2011-03-14 Richard Guenther <rguenther@suse.de>
+
+ PR middle-end/48098
+ * tree.c (build_vector_from_val): Adjust assert to requirements
+ and reality.
+
+2011-03-14 Jakub Jelinek <jakub@redhat.com>
+
+ PR bootstrap/48102
+ * graphite-cloog-compat.h (build_cloog_prog): Remove STATE parameter.
+
+2011-03-14 Andreas Tobler <andreast@fgznet.ch>
+
+ * config/rs6000/freebsd.h: (RELOCATABLE_NEEDS_FIXUP): Define in
+ terms of target_flags_explicit. Adjust copyright year.
+
+ * config.gcc: Add FreeBSD PowerPC soft-float libgcc bits.
+ * config/rs6000/t-freebsd: New file. Add override for
+ LIB2FUNCS_EXTRA.
+
+2011-03-13 Chris Demetriou <cgd@google.com>
+
+ * doc/invoke.texi (-fdiagnostics-show-option): Replace with...
+ (-fno-diagnostics-show-option): this, to reflect current default.
+ (-Werror=): Update text about -fno-diagnostics-show-option.
+
+2011-03-12 Peter Bergner <bergner@vnet.ibm.com>
+
+ PR target/48053
+ * config/rs6000/predicates.md (easy_vector_constant_add_self,
+ easy_vector_constant_msb): Do not handle V2DImode and V2DFmode.
+ * config/rs6000/rs6000.c (const_vector_elt_as_int): Add assert that
+ mode is not V2DImode or V2DFmode.
+ (vspltis_constant): Do not handle V2DImode and V2DFmode.
+ (rs6000_expand_vector_init): Replace copy_to_reg with copy_to_mode_reg.
+ * config/rs6000/rs6000.md (movdi_internal32): Allow setting VSX
+ registers to 0.
+ (movdi_internal64): Likewise.
+
+2011-03-12 Sebastian Pop <sebastian.pop@amd.com>
+
+ PR tree-optimization/47127
+ * graphite-clast-to-gimple.c (build_cloog_prog): Removed state
+ parameter.
+ (set_cloog_options): Same.
+ (scop_to_clast): Same.
+ (print_clast_stmt): Do not call cloog_state_malloc and
+ cloog_state_free.
+ (print_generated_program): Same.
+ (gloog): Same.
+ * graphite-clast-to-gimple.h (cloog_state): Declared.
+ (scop_to_clast): Adjust declaration.
+ * graphite.c (cloog_state): Defined here.
+ (graphite_initialize): Call cloog_state_malloc.
+ (graphite_finalize): Call cloog_state_free.
+
+2011-03-11 Jason Merrill <jason@redhat.com>
+
+ * attribs.c (lookup_attribute_spec): Take const_tree.
+ * tree.h: Adjust.
+
+2011-03-11 Joseph Myers <joseph@codesourcery.com>
+
+ * config/sparc/sparc.c (sparc_option_override): Use
+ PROCESSOR_NIAGARA2 not PROCESSOR_NIAGARA for "niagara2".
+
+2011-03-11 Richard Guenther <rguenther@suse.de>
+
+ PR tree-optimization/48067
+ * tree-ssa-math-opts.c (convert_mult_to_fma): Verify the
+ multiplication result will be only used once on the target
+ stmt.
+
+2011-03-11 Richard Guenther <rguenther@suse.de>
+
+ * doc/invoke.texi (max-inline-insns-single): Adjust default value.
+
+2011-03-11 Richard Guenther <rguenther@suse.de>
+
+ PR lto/48073
+ * tree.c (find_decls_types_r): Do not walk types only reachable
+ from IDENTIFIER_NODEs.
+
+2011-03-11 Jakub Jelinek <jakub@redhat.com>
+
+ PR middle-end/48044
+ * ipa.c (cgraph_remove_unreachable_nodes): Enqueue
+ all vnode->force_output nodes as needed.
+
+2011-03-11 Jason Merrill <jason@redhat.com>
+
+ PR c++/48069
+ * tree.c (type_hash_eq): Use COMPLETE_TYPE_P, not
+ COMPLETE_OR_UNBOUND_ARRAY_TYPE_P.
+
+2011-03-11 Martin Jambor <mjambor@suse.cz>
+
+ * cgraphunit.c (verify_cgraph_node): Call cgraph_get_node instead of
+ cgraph_node.
+
+2011-03-11 Jakub Jelinek <jakub@redhat.com>
+
+ PR tree-optimization/48063
+ * ipa-inline.c (cgraph_decide_inlining): Don't try to
+ inline functions called once if !tree_can_inline_p (node->callers).
+
+2011-03-11 Chen Liqin <liqin.gcc@gmail.com>
+
+ * config.gcc (score-*-elf): Add extra_parts .., update tmake_file and
+ extra_objs.
+ * config/score/score3.c: Delete.
+ * config/score/score3.h: Delete.
+ * config/score/mul-div.S: Delete.
+ * config/score/sfp-machine.h: Add new file.
+ * config/score/constraints.md: Add new file.
+ * config/score/t-score-softfp: Add new file.
+ * config/score/t-score-elf: Remove score3.o, do not generate multilib.
+ * config/score/score7.c (score7_const_ok_for_letter_p): Delete.
+ (score7_extra_constraint): Delete.
+ (score7_option_override): Remove unused code.
+ * config/score/score.c: Remove score3 and score5 define and code.
+ * config/score/score.h: Remove score3 and score5 define and code.
+ * config/score/score.md: Remove score3 template and unusual insn.
+ * config/score/score.opt: Remove score3 and score5 options.
+
+2011-03-10 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
+
+ * config/pa/pa-hpux10.h (TARGET_OS_CPP_BUILTINS): Define _REENTRANT
+ when _HPUX_SOURCE is defined.
+ (LIB_SPEC): Use -lc instead of -lc_r when -threads is specified.
+
+2011-03-10 Jason Merrill <jason@redhat.com>
+
+ PR c++/48029
+ * stor-layout.c (layout_type): Don't set structural equality
+ on arrays of incomplete type.
+ * tree.c (type_hash_eq): Handle comparing them properly.
+
+2011-03-10 Jakub Jelinek <jakub@redhat.com>
+
+ PR debug/48043
+ * config/s390/s390.c (s390_delegitimize_address): Make sure the
+ result mode matches original rtl mode.
+
+2011-03-10 Nick Clifton <nickc@redhat.com>
+
+ * config/rx/rx.md (bitset_in_memory, bitclr_in_memory: Fix timings.
+ (andsi3, andsi3_flags): Fix timings for three operand alternative.
+
+2011-03-09 Jakub Jelinek <jakub@redhat.com>
+
+ PR rtl-optimization/47866
+ * expr.c (store_field): If MEM_SCALAR_P (target), don't use
+ MEM_SET_IN_STRUCT_P (to_rtx, 1), just set MEM_IN_STRUCT_P (to_rtx)
+ if target wasn't scalar.
+ * function.c (assign_stack_temp_for_type): Assert that neither
+ MEM_SCALAR_P nor MEM_IN_STRUCT_P is set previously, set either
+ MEM_IN_STRUCT_P or MEM_SCALAR_P instead of using MEM_SET_IN_STRUCT_P
+ macro.
+ * rtl.h (MEM_SET_IN_STRUCT_P): Removed.
+
+2011-03-09 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
+
+ * config/s390/s390-protos.h (s390_label_align): New prototype.
+ * config/s390/s390.c (s390_label_align): New function.
+ * config/s390/s390.h (LABEL_ALIGN): New target macro definition.
+
+2011-03-08 Michael Meissner <meissner@linux.vnet.ibm.com>
+
+ PR target/47755
+ * config/rs6000/rs6000.c (easy_altivec_constant): Correctly handle
+ V2DI/V2DF constants. Only all 0's or all 1's are easy.
+ (output_vec_const_move): Ditto.
+
+2011-03-08 Anatoly Sokolov <aesok@post.ru>
+
+ * config/mips/mips.h (PREFERRED_RELOAD_CLASS): Remove macro.
+ * config/mips/mips-protos.h (mips_preferred_reload_class): Remove.
+ * config/mips/mips.c (mips_preferred_reload_class): Make static.
+ Change 'rclass' argument and result type to reg_class_t.
+ (TARGET_PREFERRED_RELOAD_CLASS): Define.
+
+2011-03-08 Georg-Johann Lay <avr@gjlay.de>
+
+ * config/avr/avr.h (REGISTER_MOVE_COST, MEMORY_MOVE_COST): Remove.
+ * config/avr/avr.c (TARGET_REGISTER_MOVE_COST,
+ TARGET_MEMORY_MOVE_COST): Define.
+ (avr_register_move_cost, avr_memory_move_cost): New Functions.
+
+2011-03-08 Jakub Jelinek <jakub@redhat.com>
+
+ PR debug/47881
+ * ira.c (ira): Call df_analyze again if delete_trivially_dead_insns
+ removed anything.
+
+ PR tree-optimization/48022
+ * fold-const.c (fold_comparison): Don't call fold_overflow_warning
+ for EQ/NE_EXPR.
+
+2011-03-07 Jakub Jelinek <jakub@redhat.com>
+
+ PR debug/47991
+ * var-tracking.c (find_use_val): Return NULL for
+ cui->sets && cui->store_p BLKmode MEMs.
+
+2011-03-07 Anatoly Sokolov <aesok@post.ru>
+
+ * config/stormy16/stormy16.h (PRINT_OPERAND, PRINT_OPERAND_ADDRESS):
+ Remove.
+ * config/stormy16/stormy16-protos.h (xstormy16_print_operand,
+ xstormy16_print_operand_address): Remove.
+ * config/stormy16/stormy16.c (xstormy16_print_operand,
+ xstormy16_print_operand_address): Make static.
+ (TARGET_PRINT_OPERAND, TARGET_PRINT_OPERAND_ADDRESS): Define.
+
+2011-03-07 Pat Haugen <pthaugen@us.ibm.com>
+
+ PR target/47862
+ * config/rs6000/rs6000.h (HARD_REGNO_CALLER_SAVE_MODE): Define.
+ * config/rs6000/e500.h (HARD_REGNO_CALLER_SAVE_MODE): Undefine
+ before definition.
+
+2011-03-07 Zdenek Dvorak <ook@ucw.cz>
+
+ PR bootstrap/48000
+ * cfgloopmanip.c (fix_bb_placements): Return immediately
+ if FROM is BASE_LOOP's header.
+
+2011-03-07 Paul Wögerer <paul_woegerer@mentor.com>
+
+ * gimplify.c (gimplify_function_tree): Fix building calls
+ to __builtin_return_address.
+
+2011-03-07 Alan Modra <amodra@gmail.com>
+
+ * config/rs6000/linux.h (TARGET_ASM_FILE_END): Don't define.
+ * config/rs6000/linux64.h (TARGET_ASM_FILE_END): Don't define.
+ * config/rs6000/sysv4.h (TARGET_ASM_FILE_END): Define.
+ * config/rs6000/rs6000-protos.h (init_cumulative_args): Add fndecl and
+ return_mode args.
+ * config/rs6000/rs6000.h (CUMULATIVE_ARGS): Add "escapes".
+ (INIT_CUMULATIVE_ARGS): Pass FNDECL, VOIDmode.
+ (INIT_CUMULATIVE_INCOMING_ARGS): Pass current_function_decl, VOIDmode.
+ (INIT_CUMULATIVE_LIBCALL_ARGS): Pass NULL_TREE, MODE.
+ * config/rs6000/rs6000.c
+ (rs6000_elf_end_indicate_exec_stack): Rename to..
+ (rs6000_elf_file_end): ..this. Only call file_end_indicate_exec_stack
+ for POWERPC_LINUX. Move code emitting .gnu_attribute to here, from..
+ (rs6000_file_start): ..here.
+ (rs6000_passes_float, rs6000_passes_vector, rs6000_returns_struct): New
+ file scope variables.
+ (call_ABI_of_interest): New function.
+ (init_cumulative_args): Set above vars when function return value
+ is a float, vector, or small struct.
+ (rs6000_function_arg_advance_1): Likewise for function args.
+ (rs6000_va_start): Set rs6000_passes_float if variable arg function
+ references float args.
+
+2011-03-07 Mingjie Xing <mingjie.xing@gmail.com>
+
+ * doc/cfg.texi: Remove "See" before @ref.
+ * doc/invoke.texi: Likewise.
+
+2011-03-05 Jason Merrill <jason@redhat.com>
+
+ * doc/invoke.texi (C++ Dialect Options): Document ABI v5.
+
+2011-03-05 Anthony Green <green@moxielogic.com>
+
+ * config.gcc (moxie-*-elf): Add newlib-stdint.h to tmfile.
+
+2011-03-05 Zdenek Dvorak <ook@ucw.cz>
+
+ PR rtl-optimization/47899
+ * cfgloopmanip.c (fix_bb_placements): Fix first argument
+ to flow_loop_nested_p when moving the loop upward.
+
+2011-03-05 Richard Earnshaw <rearnsha@arm.com>
+
+ PR target/47719
+ * arm.md (movhi_insn_arch4): Accept any immediate constant.
+
+2011-03-05 Jakub Jelinek <jakub@redhat.com>
+
+ PR tree-optimization/47967
+ * ipa-cp.c (build_const_val): Return NULL instead of creating
+ VIEW_CONVERT_EXPR for mismatching sizes.
+ (ipcp_create_replace_map): Return NULL if build_const_val failed.
+ (ipcp_insert_stage): If ipcp_create_replace_map returns NULL,
+ give up on versioning.
+
+2011-03-05 Alan Modra <amodra@gmail.com>
+
+ PR target/47986
+ * config/rs6000/rs6000.c (rs6000_delegitimize_address): Handle
+ full cmodel medium/large lo_sum + high addresses.
+
+2011-03-04 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
+
+ * config/s390/s390.c (s390_decompose_address): Reject non-literal
+ pool references in UNSPEC_LTREL_OFFSET.
+
+2011-03-04 Jan Hubicka <jh@suse.cz>
+
+ PR lto/47497
+ * lto-symtab.c (lto_cgraph_replace_node): Do not set thunk.alias.
+ (lto_symtab_merge_cgraph_nodes_1): Update thunk.alias pointers here.
+ * cgraph.h (cgraph_same_body_alias, cgraph_add_thunk):
+ Add node pointers.
+ * cgraph.c (cgraph_same_body_alias_1, cgraph_same_body_alias,
+ cgraph_add_thunk): Add node pointers.
+ * lto-cgraph.c (lto_output_node): Verify that thunks&aliases are
+ associated to right node.
+ (input_node): Update use of cgraph_same_body_alias
+ and cgraph_add_thunk.
+
+2011-03-04 Changpeng Fang <changpeng.fang@amd.com>
+
+ * config/i386/i386.opt (mprefer-avx128): New flag.
+ * config/i386/i386.c (ix86_preferred_simd_mode): Prefer 128-bit AVX
+ modes when the flag -mprefer-avx128 is on.
+
+2011-03-04 Richard Sandiford <richard.sandiford@linaro.org>
+
+ * dwarf2out.c (compare_loc_operands): Fix address handling.
+
+2011-03-04 Alan Modra <amodra@gmail.com>
+
+ * tree.h (TREE_ADDRESSABLE): Update FUNCTION_DECL comment.
+
+2011-03-04 Richard Guenther <rguenther@suse.de>
+
+ PR middle-end/47968
+ * expmed.c (extract_bit_field_1): Prefer vector modes that
+ vec_extract patterns can handle.
+
+2011-03-04 Richard Guenther <rguenther@suse.de>
+
+ PR middle-end/47975
+ * optabs.c (optab_for_tree_code): Do not use VECTOR_MODE_P.
+
+2011-03-04 Richard Henderson <rth@redhat.com>
+
+ * explow.c (emit_stack_save): Remove 'after' parameter.
+ (emit_stack_restore): Likewise.
+ * expr.h: Update to match.
+ * builtins.c, calls.c, stmt.c: Likewise.
+ * config/alpha/alpha.md, config/avr/avr.md: Likewise.
+ * config/mips/mips.md, config/pa/pa.md, config/vax/vax.md: Likewise.
+ * function.c (expand_function_end): Insert the emit_stack_save
+ sequence before parm_birth_insn instead of after.
+
+2011-03-03 Uros Bizjak <ubizjak@gmail.com>
+
+ * config/i386/sse.md (*avx_pmaddubsw128): Fix mode of VEC_SELECT RTX.
+ (ssse3_pmaddubsw128): Ditto.
+ (ssse3_pmaddubsw): Ditto.
+
+2011-03-03 Steve Ellcey <sje@cup.hp.com>
+
+ * config/ia64/t-hpux: Add $(srcdir)/unwind-c.c to LIB2ADDEH
+
+2011-03-03 Jakub Jelinek <jakub@redhat.com>
+
+ PR c/47963
+ * gimplify.c (omp_add_variable): Only call omp_notice_variable
+ on TYPE_SIZE_UNIT if it is a DECL.
+
+ PR debug/47283
+ * cfgexpand.c (expand_debug_expr) <case MEM_REF>: If MEM_REF
+ first operand is not is_gimple_mem_ref_addr, try to fold it.
+ If the operand still isn't is_gimple_mem_ref_addr, clear
+ MEM_EXPR on op0.
+
+2011-03-03 Richard Guenther <rguenther@suse.de>
+
+ PR middle-end/47283
+ * tree-ssa-alias.c (ptr_deref_may_alias_decl_p): Make code
+ match comment.
+ (refs_may_alias_p_1): For release branches return true if
+ we are confused by our input.
+
+2011-03-03 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
+
+ * config/s390/s390.c (s390_function_value): Rename to ...
+ (s390_function_and_libcall_value): ... this.
+ (s390_function_value): New function.
+ (s390_libcall_value): New function.
+ (TARGET_FUNCTION_VALUE, TARGET_LIBCALL_VALUE): Define target hooks.
+ * config/s390/s390.h (FUNCTION_VALUE, LIBCALL_VALUE): Remove
+ target macro definitions.
+ * config/s390/s390-protos.h (s390_function_value): Remove prototype.
+
+2011-03-02 Joseph Myers <joseph@codesourcery.com>
+
+ * config/i386/freebsd64.h (CC1_SPEC): Define.
+ * config/i386/linux64.h (CC1_SPEC): Define.
+ * config/i386/x86-64.h (CC1_SPEC): Don't define.
+
+2011-03-02 Anatoly Sokolov <aesok@post.ru>
+
+ * config/stormy16/stormy16.h (REGISTER_MOVE_COST, MEMORY_MOVE_COST):
+ Remove.
+ * config/stormy16/stormy16.c: Include reload.h.
+ (xstormy16_memory_move_cost): New function.
+ (TARGET_MEMORY_MOVE_COST): Define.
+
+2011-03-02 Richard Sandiford <richard.sandiford@linaro.org>
+
+ PR rtl-optimization/47925
+ * cse.c (count_reg_usage): Don't ignore the SET_DEST of instructions
+ with side effects. Remove the more-specific check for volatile asms.
+
2011-03-02 Alan Modra <amodra@gmail.com>
PR target/47935
* config/stormy16/stormy16.h (FUNCTION_VALUE, LIBCALL_VALUE,
FUNCTION_VALUE_REGNO_P): Remove.
- * config/stormy16/stormy16-protos.h (xstormy16_function_value):
- Remove.
+ * config/stormy16/stormy16-protos.h (xstormy16_function_value): Remove.
* config/stormy16/stormy16.c (xstormy16_function_value): Make static.
Add 'outgoing' argument.
(xstormy16_libcall_value, xstormy16_function_value_regno_p): New
PR debug/28047
* dwarf2out.c (file_table_eq): Use filename_cmp instead of strcmp.
(lookup_filename): Likewise.
- * final.c (remap_debug_filename): Use filename_ncmp instead of
- strncmp.
+ * final.c (remap_debug_filename): Use filename_ncmp instead of strncmp.
2011-02-28 Bernd Schmidt <bernds@codesourcery.com>
Jakub Jelinek <jakub@redhat.com>
(assign_stack_local_1): Change last argument type to int.
* function.c (assign_stack_local_1): Replace reduce_alignment_ok
argument with kind. If bit ASLK_RECORD_PAD is not set in it,
- don't record padding space into frame_space_list nor
- use those areas.
+ don't record padding space into frame_space_list nor use those areas.
(assign_stack_local): Adjust caller.
(assign_stack_temp_for_type): Call assign_stack_local_1 instead
of assign_stack_local, pass 0 as last argument.
* configure: Regenerated.
* config.in: Regenerated.
* varasm.c (default_function_section): Return NULL
- if HAVE_LD_EH_GC_SECTIONS_BUG and decl has implicit
- section name.
+ if HAVE_LD_EH_GC_SECTIONS_BUG and decl has implicit section name.
2011-02-28 Martin Jambor <mjambor@suse.cz>
FreeBSD 6 and later. Generally use cpu generic.
2011-02-25 Gerald Pfeifer <gerald@pfeifer.com>
-
+
* doc/cpp.texi: Update copyright years.
2011-02-25 Sebastien Bourdeauducq <sebastien@milkymist.org>
* config/lm32/lm32.md (ashlsi3): Remove unused variable.
* config/lm32/lm32.c (TARGET_EXCEPT_UNWIND_INFO): New.
(lm32_block_move_inline): Add type cast to remove warning.
- (lm32_expand_prologue): Generate fp in a way compatible with
- dwarf2out.
+ (lm32_expand_prologue): Generate fp in a way compatible with dwarf2out.
(gen_int_relational): Move declarations to start of function.
2011-02-25 Eric Botcazou <ebotcazou@adacore.com>