+2008-06-10 Uros Bizjak <ubizjak@gmail.com>
+
+ * config/i386/i386.md (*btdi_rex64): Change operand 1 predicate to
+ nonmemory_operand. Add "N" operand constraint.
+ (*btsi): Ditto.
+ (*jcc_btdi_mask_rex64): New instruction and split pattern.
+ (*jcc_btsi_mask): Ditto.
+ (*jcc_btsi_mask_1): Ditto.
+
+2008-06-10 Joseph Myers <joseph@codesourcery.com>
+
+ * config/rs6000/rs6000.c (build_opaque_vector_type): Set
+ TYPE_CANONICAL for copied element type.
+
+2008-06-10 Uros Bizjak <ubizjak@gmail.com>
+
+ PR target/36473
+ * config/i386/i386.c (ix86_tune_features) [TUNE_USE_BT]:
+ Add m_CORE2 and m_GENERIC.
+ * config/i386/predicates.md (bt_comparison_operator): New predicate.
+ * config/i386/i386.md (*btdi_rex64): New instruction pattern.
+ (*btsi): Ditto.
+ (*jcc_btdi_rex64): New instruction and split pattern.
+ (*jcc_btsi): Ditto.
+ (*jcc_btsi_1): Ditto.
+ (*btsq): Fix Intel asm dialect operand order.
+ (*btrq): Ditto.
+ (*btcq): Ditto.
+
+2008-06-09 Andy Hutchinson <hutchinsonandy@aim.com>
+
+ PR middle-end/36447
+ * simplify-rtx.c (simplify_subreg): Add check for shift count
+ greater than size.
+
+2008-06-09 Richard Sandiford <rdsandiford@googlemail.com>
+
+ * doc/md.texi: Synchronize with later constraints.md change.
+ * longlong.h (umul_ppmm): Replace the MIPS asm implementation
+ with a C implementation.
+ * config/mips/mips.c (mips_legitimize_move): Remove MFHI and
+ MFLO handling.
+ (mips_subword): Assume TImode for CONST_INTs if TARGET_64BIT.
+ (mips_split_doubleword_move): Use special MTHI and MFHI instructions
+ when moving to and from MD_REGNUM.
+ (mips_output_move): Don't handle moves from GPRs to HI_REGNUM.
+ Handle moves from LO_REGNUM to GPRs using MFLO, MACC or DMACC.
+ Handle byte and halfword moves.
+ (mips_hard_regno_mode_ok_p): Handle MD_REGS and DSP_ACC_REGS
+ separately.
+ * config/mips/constraints.md (h): Turn into NO_REGS.
+ (l, x): Update documentation.
+ * config/mips/mips.md (UNSPEC_MFHILO): Delete.
+ (UNSPEC_MFHI, UNSPEC_MTHI, UNSPEC_SET_HILO): New.
+ (UNSPEC_TLS_LDM, UNSPEC_TLS_GET_TP): Renumber.
+ (HILO): New mode iterator.
+ (MOVE128): Add TI.
+ (any_div): New code iterator.
+ (u): Extend code attribute to div and udiv.
+ (*add<mode>3_mips16, *movdi_64bit_mips16, *movsi_mips16): Use
+ d_operand in the splitters. Remove redundant CONST_INT checks.
+ (mulsi3_mult3, mul<mode>3_internal, mul<mode>3_r4000, *mul_acc_si)
+ (*macc, *msac, *msac_using_macc, *macc2, *msac2, *mul_sub_si)
+ (*muls): Remove "=h" clobbers. Adjust peephole2s and define_splits
+ accordingly, using normal moves instead of unspecs to move LO into
+ a GPR. Use d_operand and lo_operand instead of *_REG_P checks.
+ (<u>mulsidi3): Handle expansion in C code.
+ (<u>mulsidi3_32bit_internal): Rename to...
+ (<u>mulsidi3_32bit): ...this.
+ (<u>mulsidi3_32bit_r4000): Fix insn separator.
+ (*<u>mulsidi3_64bit): Rename to...
+ (<u>mulsidi3_64bit): ...this. Combine DImode "=h" and "=l" clobbers
+ into a TImode "=x" clobber. In the split, use an UNSPEC_SET_HILO
+ to set LO and HI to the multiplication result. Use a normal move
+ for MFLO and an unspec for MFHI.
+ (*<u>mulsidi3_64bit_parts): Replace with...
+ (<u>mulsidi3_64bit_hilo): ...this new instruction.
+ (<su>mulsi3_highpart): Extend to TARGET_FIX_R4000.
+ (<su>mulsi3_highpart_internal): Turn into a define_insn_and_split
+ and extend it to TARGET_FIX_R4000. Store the destination in a GPR
+ instead of HI. Split the instruction into a separate multiplication
+ and MFHI if !TARGET_FIX_R4000.
+ (<su>muldi3_highpart): Likewise.
+ (<su>mulsi3_highpart_mulhi_internal): Remove the first alternative
+ and the "=h" clobber.
+ (*<su>mulsi3_highpart_neg_mulhi_internal): Likewise.
+ (<u>mulditi3): New expander.
+ (<u>mulditi3_internal, <u>mulditi3_r4000): New patterns.
+ (madsi): Remove "=h" clobber.
+ (divmod<mode>4, udivmod<mode>4): Turn into define_insn_and_splits.
+ Force the modulus result to be a GPR and split the instruction into
+ a division followed by an MFHI after reload.
+ (<u>divmod<GPR:mode>4_hilo_<HILO:mode>): New instruction.
+ (*lea_high64): Use d_operand in the define_peephole2. Likewise
+ the MIPS16 HIGH define_split.
+ (*movdi_32bit, *movdi_gp32_fp64, *movdi_32bit_mips16): Change type
+ of acc<->gpr moves to "multi".
+ (*movdi_64bit): Replace the single "x" alternative with
+ alternatives for moving into and out of "a".
+ (*movhi_internal, *movqi_internal): Likewise. Use mips_output_move.
+ (*movsi_internal): Extend the "d<-A" alternative to "d<-a".
+ (*movdi_64bit_mips16, *movsi_mips16): Add d<-a alternatives.
+ Use d_operand in the splitters. Remove redundant CONST_INT checks.
+ (*movhi_mips16, *movqi_mips16): Likewise. Use mips_output_move.
+ (movti): New expander.
+ (*movti, *movti_mips16): New insns.
+ (mfhilo_<mode>, *mfhilo_<mode>, *mfhilo_<mode>_macc): Delete.
+ (mfhi<GPR:mode>_<HILO:mode>): New pattern.
+ (mthi<GPR:mode>_<HILO:mode>): Likewise.
+ * config/mips/predicates.md (fpr_operand): Delete.
+ (d_operand): New predicate.
+
+2008-06-09 Michael Meissner <michael.meissner@amd.com>
+
+ * config.gcc (i[34567]86-*-*): Put test in quotes to prevent
+ failure on some Bourne shells.
+ (x86_64-*-*): Ditto.
+
+2008-06-09 Kai Tietz <kai.tietz@onevision.com>
+
+ * config/i386/cygming.h (TARGET_SUBTARGET64_DEFAULT): New.
+
+2008-06-09 Eric Botcazou <ebotcazou@libertysurf.fr>
+
+ * doc/install.texi (*-*-solaris2*): Remove obsolete contents.
+ (sparc-sun-solaris2*): Likewise.
+
+2008-06-09 Arnaud Charlet <charlet@adacore.com
+
+ * doc/install.texi: Update requirements to build the Ada compiler.
+
+2008-06-08 Steven Bosscher <stevenb.gcc@gmail.com>
+
+ * df-scan.c (struct df_scan_problem_data): Remove the
+ mw_link_pool alloc pool.
+ (df_scan_free_internal): Don't free it.
+ (df_scan_alloc): Don't allocate it.
+ * df.h (struct df_link): Update comment.
+
+2008-06-08 Nathan Sidwell <nathan@codesourcery.com>
+
+ * except.h: Correct checks for when SJLJ exceptions must be used.
+
+2008-06-08 Manuel Lopez-Ibanez <manu@gcc.gnu.org>
+
+ * doc/invoke.texi (Wenum-compare): Mention that it is enabled by
+ default.
+
+2008-06-08 Joseph Myers <joseph@codesourcery.com>
+
+ PR tree-optimization/36218
+ * configure.ac: Use LDFLAGS="${LDFLAGS_FOR_BUILD}" when running
+ configure for the build system.
+ (BUILD_LDFLAGS): Define.
+ * configure: Regenerate.
+ * Makefile.in (BUILD_LDFLAGS): Define to @BUILD_LDFLAGS@.
+
+2008-07-08 Anatoly Sokolov <aesok@post.ru>
+
+ PR target/36424
+ * config/avr/avr.h (HARD_REGNO_RENAME_OK): Define.
+ * config/avr/avr.c (avr_hard_regno_rename_ok): New function.
+ * config/avr/avr-protos.h (avr_hard_regno_rename_ok): New prototype.
+
+2008-06-07 Danny Smith <dannysmith@users.sourceforge.net>
+
+ * config/i386/cygming.h (MAYBE_UWIN_CPP_BUILTINS): Remove.
+
+2008-06-07 Joseph Myers <joseph@codesourcery.com>
+
+ * config.gcc (Obsolete configurations): Remove list of
+ configurations.
+ (Unsupported targets list): Add *-*-linux*aout*, *-*-linux*libc1*,
+ *-*-solaris2.[0-6], *-*-solaris2.[0-6].*, *-*-sysv*. Remove other
+ targets matched by those patterns.
+ (strongarm*-*-*, ep9312*-*-*, xscale-*-*, parisc*-*-*,
+ m680[012]0-*-*, *-*-linux*libc1*, *-*-linux*aout*,
+ alpha*-*-unicosmk*, strongarm*-*-freebsd*, ep9312-*-elf,
+ arm*-*-kaos*, cris-*-aout, parisc*64*-*-linux*, parisc*-*-linux*,
+ hppa1.1-*-pro*, hppa1.1-*-osf*, hppa1.1-*-bsd*,
+ i[34567]86-sequent-ptx4*, i[34567]86-sequent-sysv4*,
+ i[34567]86-*-beoself*, i[34567]86-*-beos*, i[34567]86-*-sco3.2v5*,
+ i[34567]86-*-sysv5*, i[34567]86-*-sysv4*, i[34567]86-*-uwin*,
+ i[34567]86-*-kaos*, m68020-*-elf*, m68010-*-netbsdelf*,
+ mips-wrs-windiss, mt-*-elf, powerpc-*-beos*, powerpc-*-chorusos*,
+ powerpc-wrs-windiss*, powerpcle-*-sysv*, powerpc-*-kaos*,
+ powerpcle-*-kaos*, sh*-*-kaos*, sparc-*-sysv4*, strongarm-*-elf*,
+ strongarm-*-pe, strongarm-*-kaos*, vax-*-bsd*, vax-*-sysv*,
+ vax-*-ultrix*, xscale-*-elf, xscale-*-coff,
+ i[34567]86-*-linux*aout*, i[34567]86-*-linux*libc1): Remove.
+ Make code for Solaris 7 and greater unconditional for Solaris.
+ (ep9312-*-*, parisc1*, m680[012]0-*-*, parisc*-*-*, mt-*-*):
+ Remove --with-* handling.
+ * config/rs6000/sysv4.h (-mwindiss): Remove from all specs.
+ (LIB_WINDISS_SPEC, CPP_OS_WINDISS_SPEC, STARTFILE_WINDISS_SPEC,
+ ENDFILE_WINDISS_SPEC, LINK_START_WINDISS_SPEC,
+ LINK_OS_WINDISS_SPEC): Remove.
+ * config/rs6000/sysv4.opt (mwindiss): Remove.
+ * configure.ac (strongarm*-*-*, xscale*-*-*): Remove.
+ * configure: Regenerate.
+ * doc/cpp.texi: Don't mention BeOS.
+ * doc/extend.texi (interrupt): Don't mention MS1.
+ * doc/install.texi: (i386-@var{any}-sysv, m68k-bull-sysv,
+ m68k-hp-hpux, m68000-hp-hpux, m68000-att-sysv,
+ alphaev5-cray-unicosmk*, xscale-*-*, i?86-*-linux*aout,
+ i?86-*-sco3.2v5*, i?86-*-udk, m68k-hp-hpux, powerpc-*-sysv4,
+ powerpc-*-sysv4, powerpcle-*-sysv4, *-*-sysv*, vax-dec-ultrix):
+ Remove.
+ * doc/invoke.texi (MT Options): Remove.
+ (-mwindiss): Remove.
+ (CRIS Options): Remove cris-axis-aout references.
+ (HPPA Options): Don't mention hppa1.1-*-pro.
+ * doc/md.texi: (MorphoTech family): Remove.
+ * libgcc2.c: Don't handle UWIN.
+ * config/alpha/t-unicosmk: Remove.
+ * config/alpha/unicosmk.h: Remove.
+ * config/arm/kaos-arm.h: Remove.
+ * config/arm/kaos-strongarm.h: Remove.
+ * config/arm/strongarm-coff.h: Remove.
+ * config/arm/strongarm-elf.h: Remove.
+ * config/arm/strongarm-pe.h: Remove.
+ * config/arm/t-strongarm-pe: Remove.
+ * config/arm/t-xscale-coff: Remove.
+ * config/arm/t-xscale-elf: Remove.
+ * config/arm/xscale-coff.h: Remove.
+ * config/arm/xscale-elf.h: Remove.
+ * config/chorus.h: Remove.
+ * config/cris/aout.h: Remove.
+ * config/cris/aout.opt: Remove.
+ * config/cris/t-aout: Remove.
+ * config/i386/beos-elf.h: Remove.
+ * config/i386/kaos-i386.h: Remove.
+ * config/i386/ptx4-i.h: Remove.
+ * config/i386/sco5.h: Remove.
+ * config/i386/sco5.opt: Remove.
+ * config/i386/sysv4-cpp.h: Remove.
+ * config/i386/sysv5.h: Remove.
+ * config/i386/t-beos: Remove.
+ * config/i386/t-sco5: Remove.
+ * config/i386/t-uwin: Remove.
+ * config/i386/uwin.asm: Remove.
+ * config/i386/uwin.h: Remove.
+ * config/kaos.h: Remove.
+ * config/mips/windiss.h: Remove.
+ * config/mt: Remove directory.
+ * config/pa/pa-osf.h: Remove.
+ * config/pa/pa-pro-end.h: Remove.
+ * config/pa/t-pro: Remove.
+ * config/ptx4.h: Remove.
+ * config/rs6000/beos.h: Remove.
+ * config/rs6000/kaos-ppc.h: Remove.
+ * config/rs6000/t-beos: Remove.
+ * config/rs6000/windiss.h: Remove.
+ * config/sh/kaos-sh.h: Remove.
+ * config/sol2-6.h: Remove.
+ * config/sparc/sol26-sld.h: Remove.
+ * config/sparc/sysv4-only.h: Remove.
+ * config/vax/bsd.h: Remove.
+ * config/vax/t-memfuncs: Remove.
+ * config/vax/ultrix.h: Remove.
+ * config/vax/vaxv.h: Remove.
+ * config/windiss.h: Remove.
+
+2008-06-06 Uros Bizjak <ubizjak@gmail.com>
+
+ PR rtl-optimization/36438
+ * cse.c (fold_rtx) [ASHIFT, LSHIFTRT, ASHIFTRT]: Break out early
+ for vector shifts with constant scalar shift operands.
+
+2008-06-06 Sandip Matte <sandip@rmicorp.com>
+
+ * doc/invoke.texi: Document -march=xlr.
+ * config/mips/xlr.md: New file.
+ * config/mips/mips.md: Include it.
+ (cpu): Add "xlr".
+ * config/mips/mips.h (PROCESSOR_XLR): New processor_type.
+ * config/mips/mips.c (mips_cpu_info_table): Add an XLR entry.
+ (mips_rtx_cost_data): Likewise.
+
+2008-06-06 Nathan Froyd <froydnj@codesourcery.com>
+
+ * config/rs6000/rs6000.c (rs6000_mode_dependent_address): Remove
+ PRE_INC and PRE_DEC cases.
+
+2008-06-06 Jakub Jelinek <jakub@redhat.com>
+
+ PR rtl-optimization/36419
+ * except.c (expand_resx_expr): Call do_pending_stack_adjust () before
+ the emitting jump insn.
+
+ PR target/36362
+ * gimplify.c (gimplify_expr) <case TRUTH_NOT_EXPR>: If *expr_p type
+ is not bool, boolify the whole *expr_p and convert to the desired type.
+
+2008-06-06 Jakub Jelinek <jakub@redhat.com>
+
+ * c-cppbuiltin.c (c_cpp_builtins): Change _OPENMP value to 200805.
+ * langhooks.h (struct lang_hooks_for_decls): Add omp_finish_clause.
+ Add omp_private_outer_ref hook, add another argument to
+ omp_clause_default_ctor hook.
+ * langhooks-def.h (LANG_HOOKS_OMP_FINISH_CLAUSE): Define.
+ (LANG_HOOKS_OMP_PRIVATE_OUTER_REF): Define.
+ (LANG_HOOKS_OMP_CLAUSE_DEFAULT_CTOR): Change to
+ hook_tree_tree_tree_tree_null.
+ (LANG_HOOKS_DECLS): Add LANG_HOOKS_OMP_FINISH_CLAUSE and
+ LANG_HOOKS_OMP_PRIVATE_OUTER_REF.
+ * hooks.c (hook_tree_tree_tree_tree_null): New function.
+ * hooks.h (hook_tree_tree_tree_tree_null): New prototype.
+ * tree.def (OMP_TASK): New tree code.
+ * tree.h (OMP_TASK_COPYFN, OMP_TASK_ARG_SIZE, OMP_TASK_ARG_ALIGN,
+ OMP_CLAUSE_PRIVATE_OUTER_REF, OMP_CLAUSE_LASTPRIVATE_STMT,
+ OMP_CLAUSE_COLLAPSE_ITERVAR, OMP_CLAUSE_COLLAPSE_COUNT,
+ OMP_TASKREG_CHECK, OMP_TASKREG_BODY, OMP_TASKREG_CLAUSES,
+ OMP_TASKREG_FN, OMP_TASKREG_DATA_ARG, OMP_TASK_BODY,
+ OMP_TASK_CLAUSES, OMP_TASK_FN, OMP_TASK_DATA_ARG,
+ OMP_CLAUSE_COLLAPSE_EXPR): Define.
+ (enum omp_clause_default_kind): Add OMP_CLAUSE_DEFAULT_FIRSTPRIVATE.
+ (OMP_DIRECTIVE_P): Add OMP_TASK.
+ (OMP_CLAUSE_COLLAPSE, OMP_CLAUSE_UNTIED): New clause codes.
+ (OMP_CLAUSE_SCHEDULE_AUTO): New schedule kind.
+ * tree.c (omp_clause_code_name): Add OMP_CLAUSE_COLLAPSE
+ and OMP_CLAUSE_UNTIED entries.
+ (omp_clause_num_ops): Likewise. Increase OMP_CLAUSE_LASTPRIVATE
+ num_ops to 2.
+ (walk_tree_1): Handle OMP_CLAUSE_COLLAPSE and OMP_CLAUSE_UNTIED.
+ Walk OMP_CLAUSE_LASTPRIVATE_STMT.
+ * tree-pretty-print.c (dump_omp_clause): Handle
+ OMP_CLAUSE_SCHEDULE_AUTO, OMP_CLAUSE_UNTIED, OMP_CLAUSE_COLLAPSE,
+ OMP_CLAUSE_DEFAULT_FIRSTPRIVATE.
+ (dump_generic_node): Handle OMP_TASK and collapsed OMP_FOR loops.
+ * c-omp.c (c_finish_omp_for): Allow pointer iterators. Remove
+ warning about unsigned iterators. Change decl/init/cond/incr
+ arguments to TREE_VECs, check arguments for all collapsed loops.
+ (c_finish_omp_taskwait): New function.
+ (c_split_parallel_clauses): Put OMP_CLAUSE_COLLAPSE clause to
+ ws_clauses.
+ * c-parser.c (c_parser_omp_for_loop): Parse collapsed loops. Call
+ default_function_array_conversion on init. Add par_clauses argument.
+ If decl is present in parallel's lastprivate clause, change it to
+ shared and add lastprivate clause for decl to OMP_FOR_CLAUSES.
+ Add clauses argument, on success set OMP_FOR_CLAUSES to it. Look up
+ collapse count in clauses.
+ (c_parser_omp_for, c_parser_omp_parallel): Adjust
+ c_parser_omp_for_loop callers.
+ (OMP_FOR_CLAUSE_MASK): Add 1 << PRAGMA_OMP_CLAUSE_COLLAPSE.
+ (c_parser_pragma): Handle PRAGMA_OMP_TASKWAIT.
+ (c_parser_omp_clause_name): Handle collapse and untied clauses.
+ (c_parser_omp_clause_collapse, c_parser_omp_clause_untied): New
+ functions.
+ (c_parser_omp_clause_schedule): Handle schedule(auto).
+ Include correct location in the error message.
+ (c_parser_omp_all_clauses): Handle PRAGMA_OMP_CLAUSE_COLLAPSE
+ and PRAGMA_OMP_CLAUSE_UNTIED.
+ (OMP_TASK_CLAUSE_MASK): Define.
+ (c_parser_omp_task, c_parser_omp_taskwait): New functions.
+ (c_parser_omp_construct): Handle PRAGMA_OMP_TASK.
+ * tree-nested.c (convert_nonlocal_omp_clauses,
+ convert_local_omp_clauses): Handle OMP_CLAUSE_LASTPRIVATE_STMT,
+ OMP_CLAUSE_REDUCTION_INIT, OMP_CLAUSE_REDUCTION_MERGE,
+ OMP_CLAUSE_COLLAPSE and OMP_CLAUSE_UNTIED.
+ Don't handle TREE_STATIC or DECL_EXTERNAL VAR_DECLs in
+ OMP_CLAUSE_DECL.
+ (conver_nonlocal_reference, convert_local_reference,
+ convert_call_expr): Handle OMP_TASK the same as OMP_PARALLEL. Use
+ OMP_TASKREG_* macros rather than OMP_PARALLEL_*.
+ (walk_omp_for): Adjust for OMP_FOR_{INIT,COND,INCR} changes.
+ * tree-gimple.c (is_gimple_stmt): Handle OMP_TASK.
+ * c-tree.h (c_begin_omp_task, c_finish_omp_task): New prototypes.
+ * c-pragma.h (PRAGMA_OMP_TASK, PRAGMA_OMP_TASKWAIT): New.
+ (PRAGMA_OMP_CLAUSE_COLLAPSE, PRAGMA_OMP_CLAUSE_UNTIED): New.
+ * c-typeck.c (c_begin_omp_task, c_finish_omp_task): New functions.
+ (c_finish_omp_clauses): Handle OMP_CLAUSE_COLLAPSE and
+ OMP_CLAUSE_UNTIED.
+ * c-pragma.c (init_pragma): Init omp task and omp taskwait pragmas.
+ * c-common.h (c_finish_omp_taskwait): New prototype.
+ * gimple-low.c (lower_stmt): Handle OMP_TASK.
+ * tree-parloops.c (create_parallel_loop): Create 1 entry
+ vectors for OMP_FOR_{INIT,COND,INCR}.
+ * tree-cfg.c (remove_useless_stmts_1): Handle OMP_* containers.
+ (make_edges): Handle OMP_TASK.
+ * tree-ssa-operands.c (get_expr_operands): Handle collapsed OMP_FOR
+ loops, adjust for OMP_FOR_{INIT,COND,INCR} changes.
+ * tree-inline.c (estimate_num_insns_1): Handle OMP_TASK.
+ * builtin-types.def (BT_PTR_ULONGLONG, BT_PTR_FN_VOID_PTR_PTR,
+ BT_FN_BOOL_ULONGLONGPTR_ULONGLONGPTR,
+ BT_FN_BOOL_BOOL_ULL_ULL_ULL_ULLPTR_ULLPTR,
+ BT_FN_BOOL_BOOL_ULL_ULL_ULL_ULL_ULLPTR_ULLPTR,
+ BT_FN_VOID_OMPFN_PTR_OMPCPYFN_LONG_LONG_BOOL_UINT): New.
+ * omp-builtins.def (BUILT_IN_GOMP_TASK, BUILT_IN_GOMP_TASKWAIT,
+ BUILT_IN_GOMP_LOOP_ULL_STATIC_START,
+ BUILT_IN_GOMP_LOOP_ULL_DYNAMIC_START,
+ BUILT_IN_GOMP_LOOP_ULL_GUIDED_START,
+ BUILT_IN_GOMP_LOOP_ULL_RUNTIME_START,
+ BUILT_IN_GOMP_LOOP_ULL_ORDERED_STATIC_START,
+ BUILT_IN_GOMP_LOOP_ULL_ORDERED_DYNAMIC_START,
+ BUILT_IN_GOMP_LOOP_ULL_ORDERED_GUIDED_START,
+ BUILT_IN_GOMP_LOOP_ULL_ORDERED_RUNTIME_START,
+ BUILT_IN_GOMP_LOOP_ULL_STATIC_NEXT,
+ BUILT_IN_GOMP_LOOP_ULL_DYNAMIC_NEXT,
+ BUILT_IN_GOMP_LOOP_ULL_GUIDED_NEXT,
+ BUILT_IN_GOMP_LOOP_ULL_RUNTIME_NEXT,
+ BUILT_IN_GOMP_LOOP_ULL_ORDERED_STATIC_NEXT,
+ BUILT_IN_GOMP_LOOP_ULL_ORDERED_DYNAMIC_NEXT,
+ BUILT_IN_GOMP_LOOP_ULL_ORDERED_GUIDED_NEXT,
+ BUILT_IN_GOMP_LOOP_ULL_ORDERED_RUNTIME_NEXT): New builtins.
+ * gimplify.c (gimplify_omp_for): Allow pointer type for decl,
+ handle POINTER_PLUS_EXPR. If loop counter has been replaced and
+ original iterator is present in lastprivate clause or if
+ collapse > 1, set OMP_CLAUSE_LASTPRIVATE_STMT. Handle collapsed
+ OMP_FOR loops, adjust for OMP_FOR_{INIT,COND,INCR} changes.
+ (gimplify_expr): Handle OMP_SECTIONS_SWITCH and OMP_TASK.
+ (enum gimplify_omp_var_data): Add GOVD_PRIVATE_OUTER_REF.
+ (omp_notice_variable): Set GOVD_PRIVATE_OUTER_REF if needed,
+ if it is set, lookup var in outer contexts too. Handle
+ OMP_CLAUSE_DEFAULT_FIRSTPRIVATE. Handle vars that are supposed
+ to be implicitly determined firstprivate for task regions.
+ (gimplify_scan_omp_clauses): Set GOVD_PRIVATE_OUTER_REF if needed,
+ if it is set, lookup var in outer contexts too. Set
+ OMP_CLAUSE_PRIVATE_OUTER_REF if GOVD_PRIVATE_OUTER_REF is set.
+ Handle OMP_CLAUSE_LASTPRIVATE_STMT, OMP_CLAUSE_COLLAPSE and
+ OMP_CLAUSE_UNTIED. Take region_type as last argument
+ instead of in_parallel and in_combined_parallel.
+ (gimplify_omp_parallel, gimplify_omp_for, gimplify_omp_workshare):
+ Adjust callers.
+ (gimplify_adjust_omp_clauses_1): Set OMP_CLAUSE_PRIVATE_OUTER_REF if
+ GOVD_PRIVATE_OUTER_REF is set. Call omp_finish_clause langhook.
+ (new_omp_context): Set default_kind to
+ OMP_CLAUSE_DEFAULT_UNSPECIFIED for OMP_TASK regions.
+ (omp_region_type): New enum.
+ (struct gimplify_omp_ctx): Remove is_parallel and is_combined_parallel
+ fields, add region_type.
+ (new_omp_context): Take region_type as argument instead of is_parallel
+ and is_combined_parallel.
+ (gimple_add_tmp_var, omp_firstprivatize_variable, omp_notice_variable,
+ omp_is_private, omp_check_private): Adjust ctx->is_parallel and
+ ctx->is_combined_parallel checks.
+ (gimplify_omp_task): New function.
+ (gimplify_adjust_omp_clauses): Handle OMP_CLAUSE_COLLAPSE and
+ OMP_CLAUSE_UNTIED.
+ * omp-low.c (extract_omp_for_data): Use schedule(static)
+ for schedule(auto). Handle pointer and unsigned iterators.
+ Compute fd->iter_type. Handle POINTER_PLUS_EXPR increments.
+ Add loops argument. Extract data for collapsed OMP_FOR loops.
+ (expand_parallel_call): Assert sched_kind isn't auto,
+ map runtime schedule to index 3.
+ (struct omp_for_data_loop): New type.
+ (struct omp_for_data): Remove v, n1, n2, step, cond_code fields.
+ Add loop, loops, collapse and iter_type fields.
+ (workshare_safe_to_combine_p): Disallow combined for if
+ iter_type is unsigned long long. Don't combine collapse > 1 loops
+ unless all bounds and steps are constant. Adjust extract_omp_for_data
+ caller.
+ (expand_omp_for_generic): Handle pointer, unsigned and long long
+ iterators. Handle collapsed OMP_FOR loops. Adjust
+ for struct omp_for_data changes. If libgomp function doesn't return
+ boolean_type_node, add comparison of the return value with 0.
+ (expand_omp_for_static_nochunk, expand_omp_for_static_chunk): Handle
+ pointer, unsigned and long long iterators. Adjust for struct
+ omp_for_data changes.
+ (expand_omp_for): Assert sched_kind isn't auto, map runtime schedule
+ to index 3. Use GOMP_loop_ull*{start,next} if iter_type is
+ unsigned long long. Allocate loops array, pass it to
+ extract_omp_for_data. For collapse > 1 loops use always
+ expand_omp_for_generic.
+ (omp_context): Add sfield_map and srecord_type fields.
+ (is_task_ctx, lookup_sfield): New functions.
+ (use_pointer_for_field): Use is_task_ctx helper. Change first
+ argument's type from const_tree to tree. Clarify comment.
+ In OMP_TASK disallow copy-in/out sharing.
+ (build_sender_ref): Call lookup_sfield instead of lookup_field.
+ (install_var_field): Add mask argument. Populate both record_type
+ and srecord_type if needed.
+ (delete_omp_context): Destroy sfield_map, clear DECL_ABSTRACT_ORIGIN
+ in srecord_type.
+ (fixup_child_record_type): Also remap FIELD_DECL's DECL_SIZE{,_UNIT}
+ and DECL_FIELD_OFFSET.
+ (scan_sharing_clauses): Adjust install_var_field callers. For
+ firstprivate clauses on explicit tasks allocate the var by value in
+ record_type unconditionally, rather than by reference.
+ Handle OMP_CLAUSE_PRIVATE_OUTER_REF. Scan OMP_CLAUSE_LASTPRIVATE_STMT.
+ Use is_taskreg_ctx instead of is_parallel_ctx.
+ Handle OMP_CLAUSE_COLLAPSE and OMP_CLAUSE_UNTIED.
+ (create_omp_child_function_name): Add task_copy argument, use
+ *_omp_cpyfn* names if it is true.
+ (create_omp_child_function): Add task_copy argument, if true create
+ *_omp_cpyfn* helper function.
+ (scan_omp_parallel): Adjust create_omp_child_function callers.
+ Rename parallel_nesting_level to taskreg_nesting_level.
+ (scan_omp_task): New function.
+ (lower_rec_input_clauses): Don't run constructors for firstprivate
+ explicit task vars which are initialized by *_omp_cpyfn*.
+ Pass outer var ref to omp_clause_default_ctor hook if
+ OMP_CLAUSE_PRIVATE_OUTER_REF or OMP_CLAUSE_LASTPRIVATE.
+ Replace OMP_CLAUSE_REDUCTION_PLACEHOLDER decls in
+ OMP_CLAUSE_REDUCTION_INIT.
+ (lower_send_clauses): Clear DECL_ABSTRACT_ORIGIN if in task to
+ avoid duplicate setting of fields. Handle
+ OMP_CLAUSE_PRIVATE_OUTER_REF.
+ (lower_send_shared_vars): Use srecord_type if non-NULL. Don't
+ copy-out if TREE_READONLY, only copy-in.
+ (expand_task_copyfn): New function.
+ (expand_task_call): New function.
+ (struct omp_taskcopy_context): New type.
+ (task_copyfn_copy_decl, task_copyfn_remap_type, create_task_copyfn):
+ New functions.
+ (lower_omp_parallel): Rename to...
+ (lower_omp_taskreg): ... this. Use OMP_TASKREG_* macros where needed.
+ Call create_task_copyfn if srecord_type is needed. Adjust
+ sender_decl type.
+ (task_shared_vars): New variable.
+ (check_omp_nesting_restrictions): Warn if work-sharing,
+ barrier, master or ordered region is closely nested inside OMP_TASK.
+ Add warnings for barrier if closely nested inside of work-sharing,
+ ordered, or master region.
+ (scan_omp_1): Call check_omp_nesting_restrictions even for
+ GOMP_barrier calls. Rename parallel_nesting_level to
+ taskreg_nesting_level. Handle OMP_TASK.
+ (lower_lastprivate_clauses): Even if some lastprivate is found on a
+ work-sharing construct, continue looking for them on parent parallel
+ construct.
+ (lower_omp_for_lastprivate): Add lastprivate clauses
+ to the beginning of dlist rather than end. Adjust for struct
+ omp_for_data changes.
+ (lower_omp_for): Add rec input clauses before OMP_FOR_PRE_BODY,
+ not after it. Handle collapsed OMP_FOR loops, adjust for
+ OMP_FOR_{INIT,COND,INCR} changes, adjust extract_omp_for_data caller.
+ (get_ws_args_for): Adjust extract_omp_for_data caller.
+ (scan_omp_for): Handle collapsed OMP_FOR
+ loops, adjust for OMP_FOR_{INIT,COND,INCR} changes.
+ (lower_omp_single_simple): If libgomp function doesn't return
+ boolean_type_node, add comparison of the return value with 0.
+ (diagnose_sb_1, diagnose_sb_2): Handle collapsed OMP_FOR
+ loops, adjust for OMP_FOR_{INIT,COND,INCR} changes. Handle OMP_TASK.
+ (parallel_nesting_level): Rename to...
+ (taskreg_nesting_level): ... this.
+ (is_taskreg_ctx): New function.
+ (build_outer_var_ref, omp_copy_decl): Use is_taskreg_ctx instead
+ of is_parallel_ctx.
+ (execute_lower_omp): Rename parallel_nesting_level to
+ taskreg_nesting_level.
+ (expand_omp_parallel): Rename to...
+ (expand_omp_taskreg): ... this. Use OMP_TASKREG_* macros where needed.
+ Call omp_task_call for OMP_TASK regions.
+ (expand_omp): Adjust caller, handle OMP_TASK.
+ (lower_omp_1): Adjust lower_omp_taskreg caller, handle OMP_TASK.
+
+ * bitmap.c (bitmap_default_obstack_depth): New variable.
+ (bitmap_obstack_initialize, bitmap_obstack_release): Do nothing
+ if argument is NULL and bitmap_default_obstack is already initialized.
+ * ipa-struct-reorg.c (do_reorg_1): Call bitmap_obstack_release
+ at the end.
+ * matrix-reorg.c (matrix_reorg): Likewise.
+
+2008-06-06 Uros Bizjak <ubizjak@gmail.com>
+
+ * config/i386/i386.md (*indirect_jump): Macroize using P
+ mode iterator. Remove !TARGET_64BIT from insn constraints.
+ (*tablejump_1): Ditto.
+ (*indirect_jump_rex64): Remove insn pattern.
+ (*tablejump_1_rex64): Ditto.
+ (eh_return_<mode>): Macroize using P mode iterator from eh_return_di
+ and eh_return_si insn patterns.
+
+2008-06-06 Richard Guenther <rguenther@suse.de>
+
+ * tree-ssa-structalias.c (merge_smts_into): Remove.
+ (find_what_p_points_to): Do not bother to compute the
+ points-to set for pt_anything pointers.
+ * tree-ssa-operands.c (get_addr_dereference_operands): No NMT
+ for pt_anything pointers is ok.
+
+2008-06-06 Jan Hubicka <jh@suse.cz>
+
+ * passes.c (execute_ipa_pass_list): Do not regenerate summaries.
+
+2008-06-06 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ * cgraph.c: Fix typos in comments.
+ (cgraph_availability_names): Fix string typo.
+ * fold-const.c: Fix typos in comments.
+ (fold_binary): Fix typo in warning.
+ * genautomata.c: Fix typos in comments.
+ (check_presence_pattern_sets): Fix typo in local variable.
+ (output_description): Fix typo in output.
+ * ggc-zone.c (ggc_pch_finish): Fix typo in error message.
+ * hwint.h: Likewise.
+ * matrix-reorg.c (check_allocation_function): Likewise.
+ * omega.c (smooth_weird_equations): Likewise.
+ * auto-inc-dec.c: Fix typos in comments.
+ * bb-reorder.c: Likewise.
+ * builtins.c: Likewise.
+ * c-common.c: Likewise.
+ * c-cppbuiltin.c: Likewise.
+ * c-parser.c: Likewise.
+ * c-pretty-print.c: Likewise.
+ * cfgcleanup.c: Likewise.
+ * cfgexpand.c: Likewise.
+ * cfghooks.c: Likewise.
+ * cfglayout.c: Likewise.
+ * cfgloopmanip.c: Likewise.
+ * cgraphunit.c: Likewise.
+ * coverage.c: Likewise.
+ * dbxout.c: Likewise.
+ * df-byte-scan.c: Likewise.
+ * df-core.c: Likewise.
+ * df-problems.c: Likewise.
+ * df-scan.c: Likewise.
+ * dfp.c: Likewise.
+ * dominance.c: Likewise.
+ * domwalk.c: Likewise.
+ * dse.c: Likewise.
+ * dwarf2out.c: Likewise.
+ * emit-rtl.c: Likewise.
+ * et-forest.c: Likewise.
+ * function.c: Likewise.
+ * function.h: Likewise.
+ * gcc.c: Likewise.
+ * gcov-io.c: Likewise.
+ * gcov.c: Likewise.
+ * gcse.c: Likewise.
+ * genattrtab.c: Likewise.
+ * ggc-page.c: Likewise.
+ * gimplify.c: Likewise.
+ * gthr-lynx.h: Likewise.
+ * haifa-sched.c: Likewise.
+ * ipa-cp.c: Likewise.
+ * ipa-inline.c: Likewise.
+ * ipa-prop.h: Likewise.
+ * ipa-pure-const.c: Likewise.
+ * ipa-struct-reorg.c: Likewise.
+ * ipa-struct-reorg.h: Likewise.
+ * ipa-type-escape.c: Likewise.
+ * ipa.c: Likewise.
+ * loop-doloop.c: Likewise.
+ * mips-tfile.c: Likewise.
+ * mkmap-flat.awk: Likewise.
+ * mkmap-symver.awk: Likewise.
+ * modulo-sched.c: Likewise.
+ * omp-low.c: Likewise.
+ * optabs.c: Likewise.
+ * optabs.h: Likewise.
+ * opts.c: Likewise.
+ * passes.c: Likewise.
+ * postreload-gcse.c: Likewise.
+ * postreload.c: Likewise.
+ * predict.c: Likewise.
+ * pretty-print.h: Likewise.
+ * profile.c: Likewise.
+ * protoize.c: Likewise.
+ * ra-conflict.c: Likewise.
+ * real.c: Likewise.
+ * recog.c: Likewise.
+ * regclass.c: Likewise.
+ * regs.h: Likewise.
+ * reload.c: Likewise.
+ * rtl-error.c: Likewise.
+ * rtlanal.c: Likewise.
+ * scan.h: Likewise.
+ * sched-rgn.c: Likewise.
+ * see.c: Likewise.
+ * stmt.c: Likewise.
+ * target.h: Likewise.
+ * tree-dfa.c: Likewise.
+ * tree-eh.c: Likewise.
+ * tree-flow-inline.h: Likewise.
+ * tree-inline.c: Likewise.
+ * tree-into-ssa.c: Likewise.
+ * tree-loop-distribution.c: Likewise.
+ * tree-nested.c: Likewise.
+ * tree-parloops.c: Likewise.
+ * tree-pass.h: Likewise.
+ * tree-pretty-print.c: Likewise.
+ * tree-profile.c: Likewise.
+ * tree-scalar-evolution.c: Likewise.
+ * tree-sra.c: Likewise.
+ * tree-ssa-alias-warnings.c: Likewise.
+ * tree-ssa-ccp.c: Likewise.
+ * tree-ssa-coalesce.c: Likewise.
+ * tree-ssa-dom.c: Likewise.
+ * tree-ssa-dse.c: Likewise.
+ * tree-ssa-forwprop.c: Likewise.
+ * tree-ssa-live.c: Likewise.
+ * tree-ssa-live.h: Likewise.
+ * tree-ssa-loop-im.c: Likewise.
+ * tree-ssa-loop-ivopts.c: Likewise.
+ * tree-ssa-loop-niter.c: Likewise.
+ * tree-ssa-loop-prefetch.c: Likewise.
+ * tree-ssa-phiopt.c: Likewise.
+ * tree-ssa-phiprop.c: Likewise.
+ * tree-ssa-sccvn.c: Likewise.
+ * tree-ssa-ter.c: Likewise.
+ * tree-ssa-threadupdate.c: Likewise.
+ * tree-ssa.c: Likewise.
+ * tree-vect-analyze.c: Likewise.
+ * tree-vect-transform.c: Likewise.
+ * tree-vectorizer.c: Likewise.
+ * tree-vn.c: Likewise.
+ * tree-vrp.c: Likewise.
+ * tree.c: Likewise.
+ * tree.def: Likewise.
+ * tree.h: Likewise.
+ * unwind-dw2-fde.c: Likewise.
+ * unwind.inc: Likewise.
+ * value-prof.c: Likewise.
+ * vmsdbgout.c: Likewise.
+
+2008-06-05 David Edelsohn <edelsohn@gnu.org>
+
+ * config/rs6000/xcoff.h (ASM_OUTPUT_SPECIAL_POOL_ENTRY_P): Do not
+ always place FP constants in the TOC for TARGET_POWERPC64.
+ * config/rs6000/linux64.h (ASM_OUTPUT_SPECIAL_POOL_ENTRY_P): Same.
+
+2008-06-05 Joseph Myers <joseph@codesourcery.com>
+
+ * config.gcc (powerpc-*-linux*spe*): Use t-dfprules.
+ * config/rs6000/dfp.md (negdd2, absdd2, negtd2, abstd2): Do not
+ enable for TARGET_E500_DOUBLE.
+ (*movdd_softfloat32): Also enable for !TARGET_FPRS.
+ * config/rs6000/rs6000.c (invalid_e500_subreg): Treat decimal
+ floating-point modes like integer modes for E500 double.
+ (rs6000_legitimate_offset_address_p): Likewise.
+ (rs6000_legitimize_address): Likewise. Do not allow REG+REG
+ addressing for DDmode for E500 double.
+ (rs6000_hard_regno_nregs): Do not treat decimal floating-point
+ modes as using 64-bits of registers for E500 double.
+ (spe_build_register_parallel): Do not handle DDmode or TDmode.
+ (rs6000_spe_function_arg): Do not handle DDmode or TDmode
+ specially for E500 double.
+ (function_arg): Do not call rs6000_spe_function_arg for DDmode or
+ TDmode for E500 double.
+ (rs6000_gimplify_va_arg): Only handle SDmode in registers
+ specially if TARGET_HARD_FLOAT && TARGET_FPRS.
+ (rs6000_split_multireg_move): Do not handle TDmode specially for
+ E500 double.
+ (spe_func_has_64bit_regs_p): Do not treat DDmode or TDmode as
+ using 64-bit registers for E500 double.
+ (emit_frame_save): Do not handle DDmode specially for E500 double.
+ (gen_frame_mem_offset): Likewise.
+ (rs6000_function_value): Do not call spe_build_register_parallel
+ for DDmode or TDmode.
+ (rs6000_libcall_value): Likewise.
+ * config/rs6000/rs6000.h (LOCAL_ALIGNMENT, MEMBER_TYPE_FORCES_BLK,
+ DATA_ALIGNMENT, CLASS_MAX_NREGS): Do not handle DDmode specially
+ for E500 double.
+
+2008-06-04 H.J. Lu <hongjiu.lu@intel.com>
+
+ * config/i386/i386.c (setup_incoming_varargs_64): Fix a typo
+ in comments.
+
+2008-06-04 Junjie Gu <jgu@tensilica.com>
+
+ * config/xtensa/lib2funcs.S (__xtensa_nonlocal_goto): Use unsigned
+ comparison for frame pointers.
+
+2008-06-04 Andy Hutchinson <hutchinsonandy@aim.com>
+
+ PR target/27386
+ * config/avr/avr.h (PUSH_ROUNDING): Remove.
+
+2008-06-04 Andy Hutchinson <hutchinsonandy@aim.com>
+
+ PR target/30243
+ * builtins.c (expand_builtin_signbit): Don't take lowpart when
+ register is already smaller or equal to required mode.
+
+2008-06-04 Xinliang David Li <davidxl@google.com>
+
+ * tree-call-cdce.c: New file.
+ (cond_dead_built_in_calls): New static variable.
+ (input_domain): New struct.
+ (check_pow): New function.
+ (check_builtin_call): Ditto.
+ (check_target_format): Ditto.
+ (is_call_dce_candidate): Ditto.
+ (gen_one_condition): Ditto.
+ (gen_conditions_for_domain): Ditto.
+ (get_domain): Ditto.
+ (gen_conditions_for_pow_cst_base): Ditto.
+ (gen_conditions_for_pow_int_base): Ditto.
+ (gen_conditions_for_pow): Ditto.
+ (get_no_error_domain): Ditto.
+ (gen_shrink_wrap_conditions): Ditto.
+ (shrink_wrap_one_built_in_call): Ditto.
+ (shink_wrap_conditional_dead_built_in_calls): Ditto.
+ (tree_call_cdce): Ditto.
+ (gate_call_cdce): Ditto.
+ (pass_call_cdce): New gimple pass.
+ * passes.c: (init_optimization_passes): New pass.
+ * tree-pass.h: New pass declaration.
+ * opts.c (decode_options): New flag setting.
+ * common.opt: Add -ftree-builtin-call-dce flag.
+ * Makefile.in: Add new source file.
+ * tempvar.def: New tv_id.
+ * doc/invoke.texi (-ftree-builtin-call-dce): New flag.
+
+2008-06-04 Richard Guenther <rguenther@suse.de>
+
+ * tree-flow-inline.h (is_global_var): Do not check TREE_STATIC on MTAGs.
+ (is_call_clobbered): Always check var_ann->call_clobbered.
+ (mark_call_clobbered): Always set var_ann->call_clobbered.
+ (clear_call_clobbered): Always clear var_ann->call_clobbered.
+ * tree-ssa-alias.c (mark_non_addressable): Use clear_call_clobbered.
+ (reset_alias_info): Clear call clobbering info on MTAGs and
+ globals as well.
+ (set_pt_anything): Set pt_global_mem.
+ (create_tag_raw): Adjust comment.
+ (may_be_aliased): Do not check TREE_PUBLIC on MTAGs.
+
+2008-06-04 Joseph Myers <joseph@codesourcery.com>
+ Maxim Kuvyrkov <maxim@codesourcery.com>
+
+ * config/m68k/m68k.opt (mxgot): New option.
+ * config/m68k/m68k.c (legitimize_pic_address): Handle -mxgot.
+ (m68k_output_addr_const_extra): New.
+ * config/m68k/m68k.h (OUTPUT_ADDR_CONST_EXTRA): New.
+ * config/m68k/m68k-protos.h (m68k_output_addr_const_extra): Declare.
+ * config/m68k/m68k.md (UNSPEC_GOTOFF): Define.
+ * doc/invoke.texi (M680x0 Options): Document -mxgot.
+
+2008-06-04 Richard Guenther <rguenther@suse.de>
+
+ * tree-ssa-structalias.c (handle_ptr_arith): Correctly handle
+ negative or non-representable offsets.
+
+2008-06-03 H.J. Lu <hongjiu.lu@intel.com>
+
+ * config/i386/i386.c (ix86_gen_leave): New.
+ (ix86_gen_pop1): Likewise.
+ (ix86_gen_add3): Likewise.
+ (ix86_gen_sub3): Likewise.
+ (ix86_gen_sub3_carry): Likewise.
+ (ix86_gen_one_cmpl2): Likewise.
+ (ix86_gen_monitor): Likewise.
+ (override_options): Initialize ix86_gen_leave, ix86_gen_pop1,
+ ix86_gen_add3, ix86_gen_sub3, ix86_gen_sub3_carry,
+ ix86_gen_one_cmpl2 and ix86_gen_monitor.
+ (ix86_file_end): Use mov%z0 instead of mov{q}/mov{l}.
+ (output_set_got): Use mov%z0, pop%z0 and add%z0 instead of
+ mov{q}/mov{l}, pop{q}/pop{l} and add{q}/add{l}.
+ (ix86_expand_epilogue): Updated.
+ (print_operand): Handle integer register operand for 'z'.
+ (ix86_expand_strlensi_unroll_1): Likewise.
+ (ix86_expand_strlen): Likewise.
+ (ix86_expand_builtin): Likewise.
+ (x86_output_mi_thunk): Use mov%z1 and add%z1 instead of
+ mov{q}/mov{l} and add{q}/add{l}.
+
+2008-06-03 Kai Tietz <kai.tietz@onevision.com>
+
+ * config/i386/i386.md (P): New mode iterator.
+ (SFmode push_operand splitter): Macroize DImode and SImode pushes
+ using P mode iterator.
+ (DFmode push_operand splitter): Ditto.
+ (XFmode push_operand splitter): Ditto.
+ (DFmode float_extend SFmode push_operand splitter): Ditto.
+ (XFmode float_extend SFmode push_operand splitter): Do not generate
+ SImode pushes for 64bit target. Macroize Dimode and SImode
+ pushes using P mode iterator.
+ (XFmode float_extend DFmode push_operand splitter): Ditto.
+
+2008-06-03 Kai Tietz <kai.tietz@onevision.com>
+
+ * config/i386/i386-protos.h (ix86_reg_parm_stack_space): New.
+ * config/i386/i386.h (ix86_reg_parm_stack_space): Removed prototype.
+ * config/i386/i386.c (ix86_reg_parm_stack_space): Changed
+ return type to int.
+ (ix86_call_abi_override): Remove check for call_used_regs.
+
+2008-06-03 Richard Guenther <rguenther@suse.de>
+
+ * tree-ssa-structalias.c (find_func_aliases): Add constraints
+ for the lhs of calls if the return type contains pointers.
+
+2008-06-03 Kai Tietz <kai.tietz@onevision.com>
+
+ * doc/tm.texi (OVERRIDE_ABI_FORMAT): New.
+ * doc/extend.texi (ms_abi,sysv_abi): New attribute description.
+ * function.c (allocate_struct_function): Use of OVERRIDE_ABI_FORMAT.
+ * config/i386/cygming.h (TARGET_64BIT_MS_ABI): Make use
+ of cfun and DEFAULT_ABI to deceide abi mode.
+ (DEFAULT_ABI): New.
+ (REG_PARM_STACK_SPACE): Removed.
+ (OUTGOING_REG_PARM_STACK_SPACE): Removed.
+ (STACK_BOUNDARY): Use default target to deceide stack boundary.
+ * config/i386/i386-protos.h (ix86_cfun_abi): New.
+ (ix86_function_abi): Likewise.
+ (ix86_function_type_abi): Likewise.
+ (ix86_call_abi_override): Likewise.
+ * confid/i386/i386.md (SSE_REGPARM_MAX): Replaced by abi
+ specific define X86_64_SSE_REGPARM_MAX/X64_SSE_REGPARM_MAX.
+ * config/i386/i386.c (override_options): Replace TARGET_64BIT_MS_ABI.
+ (X86_64_VARARGS_SIZE): Replace REGPARM_MAX and SSE_REGPARM_MAX by abi
+ specific defines.
+ (X86_64_REGPARM_MAX): New.
+ (X86_64_SSE_REGPARM_MAX): New.
+ (X64_REGPARM_MAX): New.
+ (X64_SSE_REGPARM_MAX): New.
+ (X86_32_REGPARM_MAX): New.
+ (X86_32_SSE_REGPARM_MAX): New.
+ (ix86_handle_cconv_attribute): Replace TARGET_64BIT_MS_ABI.
+ (ix86_function_regparm): Handle user calling abi.
+ (ix86_function_arg_regno_p): Replace TARGET_64BIT_MS_ABI
+ by DEFAULT_ABI versus SYSV_ABI check.
+ (ix86_reg_parm_stack_space): New.
+ (ix86_function_type_abi): New.
+ (ix86_call_abi_override): New.
+ (ix86_function_abi): New.
+ (ix86_cfun_abi): New.
+ (init_cumulative_args): Call abi specific initialization.
+ (function_arg_advance): Remove TARGET_64BIT_MS_ABI.
+ (function_arg_64): Extend SSE_REGPARM_MAX check.
+ (function_arg (): Remove TARGET_64BIT_MS_ABI.
+ (ix86_pass_by_reference): Likewise.
+ (ix86_function_value_regno_p): Likewise.
+ (function_value_64): Replace REGPARM_MAX, and SSE_REGPARM_MAX.
+ (ix86_function_value_1): Replace TARGET_64BIT_MS_ABI.
+ (return_in_memory_ms_64): Replace TARGET_64BIT_MS_ABI.
+ (ix86_build_builtin_va_list): Replace TARGET_64BIT_MS_ABI.
+ (setup_incoming_varargs_64): Adjust regparm for call abi.
+ (ix86_setup_incoming_varargs): Replace TARGET_64BIT_MS_ABI.
+ (ix86_va_start): Likewise.
+ (ix86_gimplify_va_arg): Likewise.
+ (ix86_expand_prologue): Likewise.
+ (output_pic_addr_const): Likewise.
+ (ix86_init_machine_status): Initialize call_abi by DEFAULT_ABI.
+ (x86_this_parameter): Replace TARGET_64BIT_MS_ABI.
+ (x86_output_mi_thunk): Likewise.
+ (x86_function_profiler): Likewise.
+ * config/i386/i386.h (TARGET_64BIT_MS_ABI): Use ix64_cfun_abi.
+ (SYSV_ABI, MS_ABI): New constants.
+ (DEFAULT_ABI): New.
+ (init_regs): Add prototype of function in regclass.c file.
+ (OVERRIDE_ABI_FORMAT): New.
+ (CONDITIONAL_REGISTER_USAGE): Remove TARGET_64BIT_MS_ABI part.
+ (REG_PARM_STACK_SPACE): Use ix86_reg_parm_stack_space.
+ (OUTGOING_REG_PARM_STACK_SPACE): New.
+ (ix86_reg_parm_stack_space): New prototype.
+ (CUMULATIVE_ARGS): Add call_abi member.
+ (machine_function): Add call_abi member.
+ * config/i386/mingw32.h (EXTRA_OS_CPP_BUILTINS): Replace
+ TARGET_64BIT_MS_ABI by DEFAULT_ABI compare to MS_ABI.
+
+2008-06-02 Andy Hutchinson <hutchinsonandy@aim.com>
+
+ PR target/34879
+ * config/avr/avr.c (TARGET_BUILTIN_SETJMP_FRAME_VALUE): Redefine.
+ (avr_builtin_setjmp_frame_value): New function.
+ * config/avr/avr.md (nonlocal_goto_receiver): Define.
+ (nonlocal_goto): Define.
+
+2008-06-02 Richard Sandiford <rdsandiford@googlemail.com>
+
+ * config/mips/mips.c (mips_emit_loadgp): Return early if
+ there is nothing do to, otherwise emit a blockage if
+ !TARGET_EXPLICIT_RELOCS || crtl->profile.
+ * config/mips/mips.md (loadgp_blockage): Use SI rather than DI.
+
+2008-06-02 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ * configure.ac: Drop unneeded backslash ending up in config.in.
+ * acinclude.m4: Likewise.
+ * config.in: Regenerate.
+
+2008-05-26 Jan Hubicka <jh@suse.cz>
+
+ * predict.c (maybe_hot_frequency_p): Break out of...
+ (maybe_hot_bb_p): ... here.
+ (maybe_hot_edge_p): New.
+ * tree-ssa-coalesce.c (coalesce_cost_edge): Compute cost based on edge.
+ * basic-block.h (maybe_hot_edge_p): Declare.
+
+2008-05-31 Uros Bizjak <ubizjak@gmail.com>
+
+ * config/i386/i386.md (*cmpfp_<mode>): Enable for optimize_size.
+ (*cmpfp_<mode>_cc): Ditto.
+ (*fp_jcc_8<mode>_387): Ditto.
+ (*fop_<MODEF:mode>_2_i387): Ditto.
+ (*fop_<MODEF:mode>_3_i387): Ditto.
+ (*fop_xf_2_i387): Ditto.
+ (*fop_xf_3_i387): Ditto.
+
+2008-06-02 Tomas Bily <tbily@suse.cz>
+
+ * tree-ssa-ifcombine.c (get_name_for_bit_test): Use CONVERT_EXPR_P.
+
+2008-06-01 Richard Sandiford <rdsandiford@googlemail.com>
+
+ * config/mips/mips.c (mips_valid_offset_p): New function.
+ (mips_valid_lo_sum_p): Likewise.
+ (mips_classify_address): Use them.
+ (mips_force_address): New function.
+ (mips_legitimize_address): Use it.
+ * config/mips/mips.md (MOVE128): New mode iterator.
+ (movtf): Require TARGET_64BIT. Remove empty strings.
+ (*movtf_internal): Rename to...
+ (*movtf): ...this and require !TARGET_MIPS16. Use "m" instead
+ of "R" and use {,fp}{load,store} attributes instead of "multi".
+ Use a separate define_split.
+ (*movtf_mips16): New pattern.
+
+2008-06-01 Richard Sandiford <rdsandiford@googlemail.com>
+
+ * config/mips/mips-protos.h (mips_expand_before_return): Declare.
+ * config/mips/mips.c (mips_expand_before_return): New function.
+ (mips_expand_epilogue): Call it.
+ * config/mips/mips.md (return): Turn into a define_expand.
+ (*return): New insn.
+
+2008-06-01 Richard Sandiford <rdsandiford@googlemail.com>
+
+ * rtl.h (emit_clobber, gen_clobber, emit_use, gen_use): Declare.
+ * emit-rtl.c (emit_clobber, gen_clobber, emit_use, gen_use): New
+ functions. Do not emit uses and clobbers of CONCATs; individually
+ use and clobber their operands.
+ * builtins.c (expand_builtin_setjmp_receiver): Use emit_clobber,
+ gen_clobber, emit_use and gen_use.
+ (expand_builtin_longjmp, expand_builtin_nonlocal_goto): Likewise.
+ (expand_builtin_return): Likewise.
+ * cfgbuild.c (count_basic_blocks): Likewise.
+ * cfgrtl.c (rtl_flow_call_edges_add): Likewise.
+ * explow.c (emit_stack_restore): Likewise.
+ * expmed.c (extract_bit_field_1): Likewise.
+ * expr.c (convert_move, emit_move_complex_parts): Likewise.
+ (emit_move_multi_word, store_constructor): Likewise.
+ * function.c (do_clobber_return_reg, do_use_return_reg): Likewise.
+ (thread_prologue_and_epilogue_insns): Likewise.
+ * lower-subreg.c (resolve_simple_move): Likewise.
+ * optabs.c (widen_operand, expand_binop): Likewise.
+ (expand_doubleword_bswap, emit_no_conflict_block): Likewise.
+ * reload.c (find_reloads): Likewise.
+ * reload1.c (eliminate_regs_in_insn): Likewise.
+ * stmt.c (expand_nl_goto_receiver): Likewise.
+ * config/alpha/alpha.md (builtin_longjmp): Likewise.
+ * config/arc/arc.md (*movdi_insn, *movdf_insn): Likewise.
+ * config/arm/arm.c (arm_load_pic_register): Likewise.
+ (thumb1_expand_epilogue, thumb_set_return_address): Likewise.
+ * config/arm/arm.md (untyped_return): Likewise.
+ * config/arm/linux-elf.h (PROFILE_HOOK): Likewise.
+ * config/avr/avr.c (expand_prologue): Likewise.
+ * config/bfin/bfin.c (do_unlink): Likewise.
+ * config/bfin/bfin.md (<optab>di3, adddi3, subdi3): Likewise.
+ * config/cris/cris.c (cris_expand_prologue): Likewise.
+ * config/darwin.c (machopic_indirect_data_reference): Likewise.
+ (machopic_legitimize_pic_address): Likewise.
+ * config/frv/frv.c (frv_frame_access, frv_expand_epilogue): Likewise.
+ (frv_ifcvt_modify_insn, frv_expand_mdpackh_builtin): Likewise.
+ * config/i386/i386.c (ix86_expand_vector_move_misalign): Likewise.
+ (ix86_expand_convert_uns_didf_sse): Likewise.
+ (ix86_expand_vector_init_general): Likewise.
+ * config/ia64/ia64.md (eh_epilogue): Likewise.
+ * config/iq2000/iq2000.c (iq2000_expand_epilogue): Likewise.
+ * config/m32c/m32c.c (m32c_emit_eh_epilogue): Likewise.
+ * config/m32r/m32r.c (m32r_reload_lr): Likewise.
+ (config/iq2000/iq2000.c): Likewise.
+ * config/mips/mips.md (fixuns_truncdfsi2): Likewise.
+ (fixuns_truncdfdi2, fixuns_truncsfsi2, fixuns_truncsfdi2): Likewise.
+ (builtin_longjmp): Likewise.
+ * config/mn10300/mn10300.md (call, call_value): Likewise.
+ * config/pa/pa.md (nonlocal_goto, nonlocal_longjmp): Likewise.
+ * config/pdp11/pdp11.md (abshi2): Likewise.
+ * config/rs6000/rs6000.c (rs6000_emit_move): Likewise.
+ * config/s390/s390.c (s390_emit_prologue): Likewise.
+ * config/s390/s390.md (movmem_long, setmem_long): Likewise.
+ (cmpmem_long, extendsidi2, zero_extendsidi2, udivmoddi4): Likewise.
+ (builtin_setjmp_receiver, restore_stack_nonlocal): Likewise.
+ * config/sh/sh.c (prepare_move_operands): Likewise.
+ (output_stack_adjust, sh_expand_epilogue): Likewise.
+ (sh_set_return_address, sh_expand_t_scc): Likewise.
+ * config/sparc/sparc.c (load_pic_register): Likewise.
+ * config/sparc/sparc.md (untyped_return, nonlocal_goto): Likewise.
+ * config/spu/spu.c (spu_expand_epilogue): Likewise.
+ * config/v850/v850.c (expand_epilogue): Likewise.
+
+2008-05-31 Anatoly Sokolov <aesok@post.ru>
+
+ * config/avr/avr.md (UNSPECV_WRITE_SP_IRQ_ON): New constants.
+ (UNSPECV_WRITE_SP_IRQ_OFF): (Ditto.).
+ (movhi_sp_r_irq_off, movhi_sp_r_irq_on): New insn.
+ * config/avr/avr.c (expand_prologue, expand_epilogue): Use
+ movhi_sp_r_irq_off and movhi_sp_r_irq_on insns for writing to the
+ stack pointer register.
+ (output_movhi): Remove code for interrupt specific writing to the
+ stack pointer register.
+
+2008-05-31 Richard Guenther <rguenther@suse.de>
+
+ PR tree-optimization/34244
+ * fold-const.c (tree_expr_nonnegative_warnv_p): Do not ask VRP.
+ (tree_expr_nonzero_warnv_p): Likewise.
+ * tree-vrp.c (vrp_expr_computes_nonnegative): Call
+ ssa_name_nonnegative_p.
+ (vrp_expr_computes_nonzero): Call ssa_name_nonzero_p.
+ (extract_range_from_unary_expr): Use vrp_expr_computes_nonzero,
+ not tree_expr_nonzero_warnv_p.
+
+ PR tree-optimization/36262
+ Revert
+ 2007-11-29 Zdenek Dvorak <ook@ucw.cz>
+
+ PR tree-optimization/34244
+ * tree-vrp.c (adjust_range_with_scev): Clear scev cache.
+ (record_numbers_of_iterations): New function.
+ (execute_vrp): Cache the numbers of iterations of loops.
+ * tree-scalar-evolution.c (scev_reset_except_niters):
+ New function.
+ (scev_reset): Use scev_reset_except_niters.
+ * tree-scalar-evolution.h (scev_reset_except_niters): Declare.
+
+2008-05-31 Bernd Schmidt <bernd.schmidt@analog.com>
+
+ * config/bfin/bfin.h (TARGET_CPU_CPP_BUILTINS): Define
+ __WORKAROUND_RETS when appropriate.
+
+2008-05-31 Uros Bizjak <ubizjak@gmail.com>
+
+ * config/i386/i386.md (*fop_<mode>_comm_mixed): Macroize from
+ *fop_sf_comm_mixed and *fop_df_comm_mixed insn patterns using MODEF
+ mode iterator.
+ (*fop_<mode>_comm_sse): Macroize from *fop_sf_comm_sse and
+ *fop_df_comm_sse insn patterns using MODEF mode iterator.
+ (*fop_<mode>_comm_i387): Macroize from *fop_sf_comm_i387 and
+ *fop_df_comm_i387 insn patterns using MODEF mode iterator.
+ (*fop_<mode>_1_mixed): Macroize from *fop_sf_1_mixed and
+ *fop_df_1_mixed insn patterns using MODEF mode iterator.
+ (*fop_<mode>_1_sse): Macroize from *fop_sf_1_sse and
+ *fop_df_1_sse insn patterns using MODEF mode iterator.
+ (*fop_<mode>_1_i387): Macroize from *fop_sf_1_i387 and
+ *fop_df_1_i387 insn patterns using MODEF mode iterator.
+ (*fop_<MODEF:mode>_2_i387): Macroize from *fop_sf_2<mode>_i387 and
+ *fop_df_2<mode>_i387 insn patterns using MODEF mode iterator.
+ (*fop_<MODEF:mode>_3_i387): Macroize from *fop_sf_3<mode>_i387 and
+ *fop_df_3<mode>_i387 insn patterns using MODEF mode iterator.
+ (*fop_xf_2_i387): Rename from *fop_xf_2<mode>_i387.
+ (*fop_xf_3_i387): Rename from *fop_xf_3<mode>_i387.
+ (*fop_xf_4_i387): Use <MODE> for mode attribute.
+ (*fop_xf_5_i387): Ditto.
+ (*fop_xf_6_i387): Ditto.
+
+2008-05-30 Richard Guenther <rguenther@suse.de>
+
+ * builtins.c (build_string_literal): Avoid generating
+ a non-gimple_val result.
+
+2008-05-30 DJ Delorie <dj@redhat.com>
+
+ * exec-tool.in: Use an environment variable (private) instead of a
+ file (shared) as a semaphore, so as to not break parallel builds.
+
+2008-05-30 Steven Bosscher <stevenb.gcc@gmail.com>
+
+ * optabs.c (maybe_encapsulate_block): Remove.
+ (emit_libcall_block): Adjust accordingly.
+ * optabs.h (maybe_encapsulate_block): Remove prototype.
+
+ * config/rs6000/rs6000.c (rs6000_legitimize_tls_address):
+ Don't use maybe_encapsulate_block.
+
+2008-05-30 Steven Bosscher <stevenb.gcc@gmail.com>
+
+ * config/rs6000/rs6000.c (rs6000_legitimize_address,
+ rs6000_legitimize_reload_address, rs6000_emit_move): Make sure an
+ rtx is a SYMBOL_REF before calling get_pool_constant.
+
+2008-05-30 Eric Botcazou <ebotcazou@adacore.com>
+
+ * fold-const.c (fold_unary) <CASE_CONVERT>: Add ??? comment.
+
+2008-05-30 Danny Smith <dannysmith@users.sourceforge.net>
+
+ * incpath.c: Use HOST_LACKS_INODE_NUMBERS conditional
+ rather than OS names to choose INO_T_EQ definition.
+ (DIRS_EQ) [!INO_T_EQ]: Don't worry about case in comparison.
+ (add_path) [!INO_T_EQ]: Use lrealpath to fill canonical_name field.
+
+2008-05-29 Daniel Franke <franke.daniel@gmail.com>
+
+ PR target/36348
+ * config/darwin-f.c: New.
+ * config/t-darwin: Added rule to build darwin-f.o.
+ * config.gcc: Defined new variable, fortran_target_objs.
+ (*-*-darwin*): Set fortran_target_objs.
+ * Makefile.in: Defined new variable FORTRAN_TARGET_OBJS.
+ * configure.ac: Substitute fortran_target_objs, set FORTRAN_TARGET_OBJS.
+ * configure: Regenerated.
+
+2008-05-29 H.J. Lu <hongjiu.lu@intel.com>
+
+ PR target/35771
+ * config/i386/i386.c (ix86_function_arg_boundary): Convert to
+ canonical type if needed.
+
+2008-05-29 Eric Botcazou <ebotcazou@adacore.com>
+
+ * tree-nested.c (check_for_nested_with_variably_modified): Fix typo.
+
+2008-05-29 Richard Guenther <rguenther@suse.de>
+
+ PR tree-optimization/36343
+ PR tree-optimization/36346
+ PR tree-optimization/36347
+ * tree-flow.h (clobber_what_p_points_to): Declare.
+ * tree-ssa-structalias.c (set_uids_in_ptset): Whether the
+ pointed-to variable is dereferenced is irrelevant to whether
+ the pointer can access the pointed-to variable.
+ (clobber_what_p_points_to): New function.
+ * tree-ssa-alias.c (set_initial_properties): Use it.
+ * tree-ssa.c (verify_flow_sensitive_alias_info): Adjust
+ call clobber check for NMTs.
+
+2008-05-28 Seongbae Park <seongbae.park@gmail.com>
+
+ * value-prof.c (tree_ic_transform): Use HOST_WIDEST_INT_PRINT_DEC
+ for printing gcov_type.
+
+2008-05-28 Seongbae Park <seongbae.park@gmail.com>
+
+ * tree-ssa-propagate.c (set_rhs): Preserve the histogram
+ and the eh region information.
+ * value-prof.c (gimple_move_stmt_histograms): New function.
+ * value-prof.h (gimple_move_stmt_histograms): New function declaration.
+
+2008-05-28 Andreas Tobler <a.tobler@schweiz.org>
+
+ * config/pa/pa.md: Remove extern frame_pointer_needed declaration.
+
+2008-05-28 Seongbae Park <seongbae.park@gmail.com>
+
+ * value-prof.c (tree_ic_transform): Print counts.
+ * tree-profile.c (tree_gen_ic_func_profiler):
+ Clear __gcov_indreict_call_callee variable to avoid misattribution
+ of the profile.
+
+2008-05-28 Rafael Espindola <espindola@google.com>
+
+ * see.c (see_def_extension_not_merged): Use copy_rtx_if_shared to avoid
+ invalid sharing.
+
+2008-05-28 Richard Guenther <rguenther@suse.de>
+
+ PR tree-optimization/36339
+ * tree-ssa-alias.c (set_initial_properties): Move pt_anything
+ and clobbering code out of the loop.
+
+2008-05-28 Andreas Krebbel <krebbel1@de.ibm.com>
+
+ * config/s390/constraints.md ('b', 'C', 'D', 'e'): New constraint
+ letters defined.
+
+ * config/s390/s390.c (s390_compare_and_branch_condition_mask,
+ s390_contiguous_bitmask_p, s390_symref_operand_p,
+ s390_check_symref_alignment, s390_reload_larl_operand,
+ s390_reload_symref_address): New functions.
+ (s390_branch_condition_mnemonic): Support compare and branch
+ instructions.
+ (s390_mem_constraint): Avoid symrefs to accepted by the 'T'
+ and 'W' constraints.
+ (s390_secondary_reload): Add secondary reloads for unaligned
+ symbol refs or symbol refs to floating point or QI/TI mode
+ integer values.
+ (legitimate_address_p): Accept symbol references as addresses.
+ (s390_expand_insv): Use rotate and insert selected bits
+ instruction for insv when building for z10.
+ (print_operand_address): Handle symbol ref addresses.
+ (print_operand): Output modifier 'c' added for signed byte values.
+ (s390_encode_section_info): Mark symbol refs with
+ SYMBOL_FLAG_NOT_NATURALLY_ALIGNED if appropriate.
+
+ * config/s390/s390.md (SIL,RRS,RIS): New instruction formats added.
+ (length attribute): RRF, RRR have 4 byte length.
+ (FPALL, INTALL): New mode iterators added.
+ (*tstdi_sign, *cmpdi_ccs_sign, *cmpsi_ccs_sign,
+ *cmp<mode>_ccs, *cmpdi_ccu_zero, *cmpdi_ccu, *cmpsi_ccu, *cmphi_ccu,
+ *movdi_64, *movsi_zarch, *movhi, movmem<mode>, *movmem_short,
+ *extendsidi2, *extendhidi2_extimm, *extendhisi2_extimm,
+ *zero_extendsidi2, adddi3, *adddi3_31z, *adddi3_31, addsi3,
+ *add<mode>3, *add<mode>3_carry1_cc, *add<mode>3_carry2_cc,
+ *add<mode>3_cc, *add<mode>3_imm_cc, *muldi3_sign, muldi3,
+ *mulsi3_sign, mulsi3, mulsidi3): Patterns enhanced with z10
+ instructions.
+ (*cmphi_ccs_z10, *cmpdi_ccs_signhi_rl, *cmpsi_ccu_zerohi_rlsi,
+ *cmp<GPR:mode>_ccu_zerohi_rldi, *cmp_and_br_signed_<mode>,
+ *cmp_and_br_unsigned_<mode>, reload<INTALL:mode><P:mode>_tomem_z10,
+ reload<INTALL:mode><P:mode>_toreg_z10,
+ reload<FPALL:mode><P:mode>_tomem_z10,
+ reload<FPALL:mode><P:mode>_toreg_z10,
+ reload<P:mode>_larl_odd_addend_z10, *execute_rl, *insv<mode>_z10,
+ *insv<mode>_z10_noshift, *insv<mode>_or_z10_noshift,
+ *zero_extendhi<mode>2_z10, *cmp_and_trap_signed_int<mode>,
+ *cmp_and_trap_unsigned_int<mode>, prefetch): New pattern or expander
+ definition.
+ (movmem, clrmem, cmpmem): New splitters added.
+
+ * config/s390/predicates.md (larl_operand): Use
+ SYMBOL_REF_FLAGS (op) & SYMBOL_FLAG_ALIGN1 replaced with
+ SYMBOL_REF_ALIGN1_P.
+ (s390_signed_integer_comparison,
+ s390_unsigned_integer_comparison): New predicates.
+
+ * config/s390/s390-protos.h (s390_check_symref_alignment,
+ s390_contiguous_bitmask_p, s390_reload_larl_operand,
+ s390_reload_symref_address,
+ s390_compare_and_branch_condition_mask): Prototypes added.
+
+ * config/s390/s390.h (TARGET_MEM_CONSTRAINT,
+ SYMBOL_REF_ALIGN1_P, SYMBOL_FLAG_NOT_NATURALLY_ALIGNED,
+ SYMBOL_REF_NOT_NATURALLY_ALIGNED_P): Macro definition added.
+
+2008-05-28 Andreas Krebbel <krebbel1@de.ibm.com>
+
+ * config/s390/s390.c (z10_cost): New cost function for z10.
+ (s390_handle_arch_option, override_options): Support -march=z10 switch.
+ (s390_issue_rate): Adjust issue rate for z10.
+ * config/s390/s390.h (processor_type): Add PROCESSOR_2097_Z10.
+ (processor_flags): Add PF_Z10.
+ (TARGET_CPU_Z10, TARGET_Z10): New macro definitions.
+ * config/s390/s390.md (cpu, cpu_facility attributes): Add z10.
+ * gcc/config.gcc: Add z10.
+
+2008-05-28 Richard Guenther <rguenther@suse.de>
+
+ PR tree-optimization/36291
+ * tree-flow. h (struct gimple_df): Remove var_anns member.
+ * tree-flow-inline.h (gimple_var_anns): Remove.
+ (var_ann): Simplify.
+ * tree-dfa.c (create_var_ann): Simplify.
+ (remove_referenced_var): Clear alias info from var_anns of globals.
+ * tree-ssa.c (init_tree_ssa): Do not allocate var_anns.
+ (delete_tree_ssa): Clear alias info from var_anns of globals.
+ Do not free var_anns.
+ (var_ann_eq): Remove.
+ (var_ann_hash): Likewise.
+
+2008-05-28 Mark Shinwell <shinwell@codesourcery.com>
+
+ * config/mips/mips.c (mips_cpu_info_table): Add loongson2e
+ and loongson2f entries.
+ (mips_rtx_cost_data): Add entries for Loongson-2E/2F.
+ * config/mips/mips.h (processor_type): Add Loongson-2E
+ and Loongson-2F entries.
+ (TARGET_LOONGSON_2E, TARGET_LOONGSON_2F, TARGET_LOONGSON_2EF): New.
+ (MIPS_ISA_LEVEL_SPEC): Handle Loongson-2E/2F.
+ * config/mips/mips.md (define_attr cpu): Add loongson2e and loongson2f.
+ * doc/invoke.texi (MIPS Options): Document loongson2e
+ and loongson2f processor names.
+
+2008-05-27 H.J. Lu <hongjiu.lu@intel.com>
+
+ PR target/35767
+ PR target/35771
+ * config/i386/i386.c (ix86_function_arg_boundary): Use
+ alignment of canonical type.
+ (ix86_expand_vector_move): Check unaligned memory access for
+ all SSE modes.
+
+2008-05-27 H.J. Lu <hongjiu.lu@intel.com>
+
+ * dwarf2out.c (current_fde): Change return type to dw_fde_ref.
+ Moved to the front of file.
+
2008-05-27 Xuepeng Guo <xuepeng.guo@intel.com>
H.J. Lu <hongjiu.lu@intel.com>
2008-05-27 Richard Guenther <rguenther@suse.de>
PR tree-optimization/36245
- * tree-ssa-address.c (add_to_parts): Deal with non-pointer
- bases.
+ * tree-ssa-address.c (add_to_parts): Deal with non-pointer bases.
2008-05-27 Andreas Krebbel <krebbel1@de.ibm.com>
alternatives according to the "enabled" attribute
* recog.h (struct recog_data): New field alternative_enabled_p.
(skip_alternative): New inline function.
- * regclass.c: (record_operand_costs): Check the "enabled"
- attribute.
+ * regclass.c: (record_operand_costs): Check the "enabled" attribute.
(record_reg_classes): Skip alternative according to the
"enabled" attribute.
* recog.c (asm_operand_ok, preprocess_constraints,
constrain_operands): Likewise.
* regclass.c (record_reg_classes): Likewise.
- * reload.c (find_reloads, alternative_allows_const_pool_ref):
- Likewise.
+ * reload.c (find_reloads, alternative_allows_const_pool_ref): Likewise.
* reload1.c (maybe_fix_stack_asms): Likewise.
- * stmt.c (parse_output_constraint, parse_input_constraint):
- Likewise.
+ * stmt.c (parse_output_constraint, parse_input_constraint): Likewise.
* recog.h: Adjust comment.
* genpreds.c (generic_constraint_letters): Remove 'm' constraint.
- * genoutput.c (note_constraint): Don't emit error for 'm'
- constraint.
+ * genoutput.c (note_constraint): Don't emit error for 'm' constraint.
* doc/md.texi: Add a note to description of 'm' constraint.
* doc/tm.texi: Document the new TARGET_MEM_CONSTRAINT macro.
(cgraph_decide_inlining_incrementally): Likewise.
2008-05-26 Tristan Gingold <gingold@adacore.com>
-
Anatoly Sokolov <aesok@post.ru>
+ Anatoly Sokolov <aesok@post.ru>
* config/avr/avr.md ("call_prologue_saves"): Use hi8(gs())/lo8(gs())
instead of pm_lo8/pm_hi8 to makes this call working on avr6.
2008-05-26 Richard Guenther <rguenther@suse.de>
* tree-ssa-sccvn.c (expr_has_constants): Declare.
- (visit_reference_op_load): Initialize VN_INFO->has_constants
- properly.
+ (visit_reference_op_load): Initialize VN_INFO->has_constants properly.
2008-05-26 H.J. Lu <hongjiu.lu@intel.com>
PR middle-end/36253
- * caller-save.c (insert_restore): Verify alignment of spill
- space.
+ * caller-save.c (insert_restore): Verify alignment of spill space.
(insert_save): Likewise.
-
* cfgexpand.c (LOCAL_ALIGNMENT): Removed.
-
* defaults.h (LOCAL_ALIGNMENT): New. Provide default.
(STACK_SLOT_ALIGNMENT): Likewise.
-
* function.c (LOCAL_ALIGNMENT): Removed.
(get_stack_local_alignment): New.
(assign_stack_local): Use it. Set alignment on stack slot.
(assign_stack_temp_for_type): Use get_stack_local_alignment.
-
* config/i386/i386.h (LOCAL_ALIGNMENT): Updated.
(STACK_SLOT_ALIGNMENT): New.
-
* config/i386/i386.c (ix86_local_alignment): Handle caller-save
stack slot in XFmode.
2008-05-25 Eric Botcazou <ebotcazou@adacore.com>
-
* tree-nested.c (convert_tramp_reference) <ADDR_EXPR>: Do not
+ * tree-nested.c (convert_tramp_reference) <ADDR_EXPR>: Do not
build a trampoline if we don't want one.
* varasm.c (initializer_constant_valid_p) <ADDR_EXPR>: Do not
return zero for nested functions if we don't want a trampoline.
2008-05-24 Richard Guenther <rguenther@suse.de>
- * tree-dfa.c (refs_may_alias_p): Re-instantiate case that
- a scalar variable can be only accessed through a pointer
- or a union.
+ * tree-dfa.c (refs_may_alias_p): Re-instantiate case that a scalar
+ variable can be only accessed through a pointer or a union.
2008-05-24 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* target.h (gcc_target): Add allocate_stack_slots_for_args.
* function.c (use_register_for_decl): Use
targetm.calls.allocate_stack_slots_for_args.
- * target-def.h (TARGET_CALLS): Add
- TARGET_ALLOCATE_STACK_SLOTS_FOR_ARGS.
- * config/arm/arm.c (arm_allocate_stack_slots_for_args):
- New function.
+ * target-def.h (TARGET_CALLS): Add TARGET_ALLOCATE_STACK_SLOTS_FOR_ARGS.
+ * config/arm/arm.c (arm_allocate_stack_slots_for_args): New function.
(TARGET_ALLOCATE_STACK_SLOTS_FOR_ARGS): Define.
2008-05-23 Eric Botcazou <ebotcazou@adacore.com>
2008-05-23 Richard Guenther <rguenther@suse.de>
- * tree-ssa-operands.c (mark_difference_for_renaming): Use
- bitmap_xor.
+ * tree-ssa-operands.c (mark_difference_for_renaming): Use bitmap_xor.
2008-05-23 Uros Bizjak <ubizjak@gmail.com>
Jakub Jelinek <jakub@redhat.com>
* doc/install.texi (Options specification): Document --enable-cld.
* doc/invoke.texi (Machine Dependent Options)
- [i386 and x86-64 Options]: Add -mcld option.
- (Intel 386 and AMD x86-64 Options): Document -mcld option.
+ [i386 and x86-64 Options]: Add -mcld option.
+ (Intel 386 and AMD x86-64 Options): Document -mcld option.
2008-05-23 Kai Tietz <kai.tietz@onevison.com>
* config/i386/i386.c (return_in_memory_32): Add ATTRIBUTE_UNUSED.
parameter.
* config/mips/mips.h (MIPS_COMPARE_AND_SWAP_12): Add OPS parameter.
(MIPS_COMPARE_AND_SWAP_12_0): Delete macro.
- (MIPS_COMPARE_AND_SWAP_12_ZERO_OP,
- MIPS_COMPARE_AND_SWAP_12_NONZERO_OP,
+ (MIPS_COMPARE_AND_SWAP_12_ZERO_OP, MIPS_COMPARE_AND_SWAP_12_NONZERO_OP,
MIPS_SYNC_OP_12, MIPS_SYNC_OP_12_NOT_NOP,
MIPS_SYNC_OP_12_NOT_NOT, MIPS_SYNC_OLD_OP_12,
MIPS_SYNC_OLD_OP_12_NOT_NOP, MIPS_SYNC_OLD_OP_12_NOT_NOP_REG,
MIPS_SYNC_OLD_OP_12_NOT_NOT, MIPS_SYNC_OLD_OP_12_NOT_NOT_REG,
MIPS_SYNC_NEW_OP_12, MIPS_SYNC_NEW_OP_12_NOT_NOP,
MIPS_SYNC_NEW_OP_12_NOT_NOT, MIPS_SYNC_EXCHANGE_12,
- MIPS_SYNC_EXCHANGE_12_ZERO_OP,
- MIPS_SYNC_EXCHANGE_12_NONZERO_OP): New macros.
+ MIPS_SYNC_EXCHANGE_12_ZERO_OP, MIPS_SYNC_EXCHANGE_12_NONZERO_OP):
+ New macros.
2008-05-20 H.J. Lu <hongjiu.lu@intel.com>
* config/i386/i386.c (ix86_expand_vector_init_concat): New.
(ix86_expand_vector_init_interleave): Likewise.
- (ix86_expand_vector_init_general): Use them. Assert word_mode
- == SImode when n_words == 4.
+ (ix86_expand_vector_init_general): Use them. Assert
+ word_mode == SImode when n_words == 4.
2008-05-19 Uros Bizjak <ubizjak@gmail.com>
OSDN Git Service
