+2008-10-10 Alexandre Oliva <aoliva@redhat.com>
+
+ * fortran/trans-types.c (gfc_get_nodesc_array_type): Don't
+ vary types depending on debug info.
+
+2008-10-10 Alexandre Oliva <aoliva@redhat.com>
+
+ * c-gimplify.c (c_genericize): Don't refer to DECL_ASSEMBLER_NAME
+ before ensuring it's already computed.
+
+2008-10-09 Jakub Jelinek <jakub@redhat.com>
+
+ * rtl.h (locator_eq): New decl.
+ * cfglayout.c (locator_scope): New function.
+ (insn_scope): Use it.
+ (locator_eq): New function.
+ (fixup_reorder_chain): Search for last insn in src bb
+ that has locator set or first insn in dest bb. Use
+ locator_eq instead of == to compare locators.
+ * cfgrtl.c (cfg_layout_merge_blocks): Likewise.
+ * cfgcleanup.c (try_forward_edges): Use locator_eq instead of
+ == to compare locators.
+
+ * tree-ssa-live.c (remove_unused_locals): Mark all edge's goto_block
+ as used.
+ * gimple-low.c (lower_function_body, lower_gimple_return,
+ lower_builtin_setjmp): Set gimple_block on the newly created stmts.
+ * tree-cfg.c (make_cond_expr_edges, make_goto_expr_edges): Only set
+ goto_block on edges if goto_locus is known.
+
+ PR middle-end/37774
+ * tree.h (get_object_alignment): Declare.
+ * emit-rtl.c (set_mem_attributes_minus_bitpos): Call
+ get_object_alignment if needed.
+ * builtins.c (get_pointer_alignment): Move ADDR_EXPR operand handling
+ to ...
+ (get_object_alignment): ... here. New function. Try harder to
+ determine alignment from get_inner_reference returned offset.
+
+2008-10-08 Jakub Jelinek <jakub@redhat.com>
+
+ * graphite.c (gloog): Don't call find_unreachable_blocks
+ before delte_unreachable_blocks.
+
+ * cfgexpand.c (expand_gimple_cond): Convert also goto_block and
+ goto_locus of true_edge into RTL locator.
+
+2008-10-08 Uros Bizjak <ubizjak@gmail.com>
+
+ * config/i386/i386.md (*jcc_btdi_rex64): Clobber FLAGS_REG.
+ (*jcc_btdi_mask_rex64): Ditto.
+ (*jcc_btsi): Ditto.
+ (*jcc_btsi_mask): Ditto.
+ (*jcc_btsi_1): Ditto.
+ (*jcc_btsi_mask_1): Ditto.
+
+2008-10-08 Paul Brook <paul@codesourcery.com>
+
+ * config/arm/bpabi.h (ARM_FUNCTION_PROFILER): Define new EABI
+ compatible profiler (__gnu_mcount_nc).
+ (SUBTARGET_FRAME_POINTER_REQUIRED): Define.
+
+2008-10-08 H.J. Lu <hongjiu.lu@intel.com>
+
+ * config/i386/i386.c (initial_ix86_tune_features): Add
+ X86_TUNE_USE_VECTOR_FP_CONVERTS.
+ * config/i386/i386.h (ix86_tune_indices): Likewise.
+ (TARGET_USE_VECTOR_FP_CONVERTS): New.
+
+ * config/i386/i386.md: Check TARGET_USE_VECTOR_FP_CONVERTS
+ instead of (TARGET_USE_VECTOR_CONVERTS || TARGET_GENERIC)
+ for FP to FP splitters.
+
+2008-10-08 H.J. Lu <hongjiu.lu@intel.com>
+
+ * config/i386/i386.md: Add missing gen_sse2_cvtdq2p to convert
+ splitter.
+
+2008-10-08 Jakub Jelinek <jakub@redhat.com>
+
+ PR target/36635
+ PR target/37290
+ PR rtl-optimization/37341
+ * cse.c (cse_cc_succs): Add ORIG_BB argument, don't follow edges
+ to ORIG_BB, pass through ORIG_BB recursively.
+ (cse_condition_code_reg): Adjust caller.
+
+2008-10-08 Kai Tietz <kai.tietz@onevision.com>
+
+ * sdbout.c (sdbout_one_type): Treat the value type
+ CONST_DECL for enumerals.
+
+2008-10-07 H.J. Lu <hongjiu.lu@intel.com>
+
+ * config/i386/i386.md: Remove trailing white spaces.
+
+2008-10-07 Kenneth Zadeck <zadeck@naturalbridge.com>
+
+ PR rtl-optimization/37448
+ * alloc-pool.c (struct alloc_pool_descriptor) [elt_size]: New field.
+ (stuct alloc_pool_descriptor) [created, allocated, current, peak]:
+ Make unsigned long.
+ (struct output_info) [count]: Renamed total_created and made
+ unsigned long.
+ (struct output_info) [size]: Renamed total_allocated and made
+ unsigned long.
+ (create_alloc_pool, empty_alloc_pool, pool_alloc, pool_free):
+ Properly keep track of desc->size.
+ (print_statistics, dump_alloc_pool_statistics): Enhance the
+ printing of statistics to print the number of elements and to use
+ unsigned longs.
+
+2008-10-07 Jakub Jelinek <jakub@redhat.com>
+
+ PR middle-end/37576
+ * opts.h (CL_SAVE): Move up to flags range.
+ (CL_PARAMS, CL_WARNING, CL_OPTIMIZATION, CL_TARGET,
+ CL_COMMON): Renumber.
+ (CL_MIN_OPTION_CLASS): Set to CL_PARAMS.
+ * opts.c (common_handle_option): Revert last change.
+
+2008-10-07 H.J. Lu <hongjiu.lu@intel.com>
+
+ * config/i386/i386-protos.h (ix86_schedule): New.
+
+ * config/i386/i386.c (ix86_schedule): New.
+ (override_options): Add schedule to processor_alias_table. Set
+ ix86_schedule from the schedule field in processor_alias_table.
+ (ix86_function_specific_save): Save ix86_schedule.
+ (ix86_function_specific_restore): Restore ix86_schedule.
+
+ * config/i386/i386.md (cpu): Map to ix86_schedule instead of
+ ix86_tune. Add none and remove i386, i486, pentium4, nocona
+ and generic32.
+
+ * config/i386/i386.opt: Add schedule.
+
+ * config/i386/ppro.md: Remove generic32.
+
+2008-10-07 Simon Martin <simartin@users.sourceforge.net>
+
+ PR c/35437
+ * expr.c (count_type_elements): Handle ERROR_MARK.
+
+2008-10-07 Jakub Jelinek <jakub@redhat.com>
+
+ PR debug/29609
+ PR debug/36690
+ PR debug/37616
+ * basic-block.h (struct edge_def): Add goto_block field.
+ * cfglayout.c (fixup_reorder_chain): Ensure that there is at least
+ one insn with locus corresponding to edge's goto_locus if !optimize.
+ * profile.c (branch_prob): Copy edge's goto_block.
+ * cfgrtl.c (force_nonfallthru_and_redirect): Use goto_locus for
+ emitted jumps.
+ (cfg_layout_merge_blocks): Emit a nop with edge's goto_locus
+ locator in between the merged basic blocks if !optimize and needed.
+ * cfgexpand.c (expand_gimple_cond): Convert goto_block and
+ goto_locus into RTL locator. For unconditional jump use that
+ locator for the jump insn.
+ (expand_gimple_cond): Convert goto_block and goto_locus into
+ RTL locator for all remaining edges. For unconditional jump
+ use that locator for the jump insn.
+ * cfgcleanup.c (try_forward_edges): Avoid the optimization if
+ there is more than one edge or insn locator along the forwarding
+ edges and !optimize. If there is just one, set e->goto_locus.
+ * tree-cfg.c (make_cond_expr_edges, make_goto_expr_edges): Set also
+ edge's goto_block.
+ (move_block_to_fn): Adjust edge's goto_block.
+
+2008-10-07 H.J. Lu <hongjiu.lu@intel.com>
+
+ PR middle-end/37731
+ * expmed.c (expand_mult): Properly check DImode constant in
+ CONST_DOUBLE.
+
+2008-10-07 Jakub Jelinek <jakub@redhat.com>
+
+ PR debug/37738
+ * dwarf2out.c (common_block_die_table): New variable.
+ (common_block_die_table_hash, common_block_die_table_eq): New
+ functions.
+ (gen_variable_die): Look up a DW_TAG_common_block die for a particular
+ COMMON block in the current scope rather than globally. Optimize
+ DW_OP_addr SYMBOL_REF DW_OP_plus_uconst off into
+ DW_OP_addr SYMBOL_REF+off.
+
+2008-10-07 Eric Botcazou <ebotcazou@adacore.com>
+
+ * tree-ssa-loop-ivopts.c (may_be_nonaddressable_p) <VIEW_CONVERT_EXPR>:
+ Return true for non-addressable GIMPLE operands.
+
+2008-10-07 H.J. Lu <hongjiu.lu@intel.com>
+
+ PR target/24765
+ * config/i386/i386.c (initial_ix86_tune_features): Remove
+ X86_TUNE_USE_BIT_TEST.
+ * config/i386/i386.h (ix86_tune_indices): Likewise.
+ (TARGET_USE_BIT_TEST): Removed.
+
+2008-10-07 Bernhard Reutner-Fischer <aldot@gcc.gnu.org>
+
+ * config.gcc (arm*-*-*): Add aapcs-linux to supported ABIs.
+
2008-10-06 Adam Nemet <anemet@caviumnetworks.com>
* config/mips/mips.md (mulsi3_mul3, muldi3_mul3): Merge these ...
(print_operand_address): Always use output_addr_const for
constant pool addresses.
(rs6000_output_addr_const_extra): New function.
- (create_TOC_reference): Create an UNSPEC_TOCREL instead of
- a MINUS.
+ (create_TOC_reference): Create an UNSPEC_TOCREL instead of a MINUS.
2008-10-06 Vladimir Makarov <vmakarov@redhat.com>
* config/rs6000/rs6000.c (USE_FP_FOR_ARG_P): Revert
TARGET_DOUBLE_FLOAT, TARGET_SINGLE_FLOAT.
(function_arg_advance): Condition on TARGET_DOUBLE_FLOAT,
- TARGET_SINGLE_FLOAT.
- Revert SCALAR_FLOAT_MODE_P condition.
- (function_arg): Condition on TARGET_DOUBLE_FLOAT,
- TARGET_SINGLE_FLOAT.
+ TARGET_SINGLE_FLOAT. Revert SCALAR_FLOAT_MODE_P condition.
+ (function_arg): Condition on TARGET_DOUBLE_FLOAT, TARGET_SINGLE_FLOAT.
(rs6000_function_value): Revert TARGET_DOUBLE_FLOAT,
TARGET_SINGLE_FLOAT.
(vec_promote): Define.
2008-10-01 Andrew Pinski <andrew_pinski@playstation.sony.com>
- Yukishige Shibata <shibata@rd.scei.sony.co.jp>
- Trevor Smigiel <Trevor_Smigiel@playstation.sony.com>
+ Yukishige Shibata <shibata@rd.scei.sony.co.jp>
+ Trevor Smigiel <Trevor_Smigiel@playstation.sony.com>
* config/rs6000/rs6000-c.c (altivec_overloaded_builtins): Add Cell
Altivec intrinsics.
2008-09-22 Adam Nemet <anemet@caviumnetworks.com>
* config/mips/mips.h (ISA_HAS_BADDU): New macro.
- * config/mips/mips.md (*baddu_si_eb, *baddu_si_el,
- *baddu_di<mode>): New patterns.
+ * config/mips/mips.md (*baddu_si_eb, *baddu_si_el, *baddu_di<mode>):
+ New patterns.
2008-09-22 Richard Guenther <rguenther@suse.de>
PR target/37528
* config/i386/t-cygming (SHLIB_LC): Remove.
(SHLIB_LINK): Don't add static objects to SHLIB_IMPLIB
- * config/i386/t-cygwin (SHLIB_LC): Specify all required
- libraries.
+ * config/i386/t-cygwin (SHLIB_LC): Specify all required libraries.
2008-09-22 Hans-Peter Nilsson <hp@axis.com>
(SSA Operands): Rename from 'Statement Operands'.
* doc/generic.texi: New.
* doc/gimple.texi: New.
- * Makefile.in (TEXI_GCCINT_FILES): Add generic.texi and
- gimple.texi.
+ * Makefile.in (TEXI_GCCINT_FILES): Add generic.texi and gimple.texi.
* Makefile.in (TEXI_GCCINT_FILES):
* gimple.c (gimple_copy_call_skip_args): Rename from
giple_copy_call_skip_args. Update all users.
2008-09-18 Alexander Monakov <amonakov@ispras.ru>
PR middle-end/37499
- * sched-int.h (struct _haifa_insn_data): Remove unused field
- ref_count.
+ * sched-int.h (struct _haifa_insn_data): Remove unused field ref_count.
* sched-rgn.c (ref_counts): Remove.
(insn_referenced): New static variable.
* haifa-sched.c (dep_cost_1): Recognize the producer even if the
consumer is an asm. Add comment why this is important.
(choose_ready): Add comment to the "INSN_CODE (insn) >= 0 ||
- recog_memoized (insn) < 0" assert. Put ENABLE_CHECKING around
- it.
+ recog_memoized (insn) < 0" assert. Put ENABLE_CHECKING around it.
2008-09-17 Joseph Myers <joseph@codesourcery.com>
* ira-emit.c (change_loop): Use all_allocnos.
- * ira-build.c (create_loop_tree_nodes, finish_loop_tree_node):
- Ditto.
- (ira_create_allocno): Set up all_allocnos bit for the created
- allocno.
+ * ira-build.c (create_loop_tree_nodes, finish_loop_tree_node): Ditto.
+ (ira_create_allocno): Set up all_allocnos bit for the created allocno.
(create_cap_allocno): Remove setting mentioned_allocnos.
(create_insn_allocnos): Ditto.
(remove_unnecessary_allocnos): Use all_allocnos.