+2008-10-10 Alexandre Oliva <aoliva@redhat.com>
+
+ * fortran/trans-types.c (gfc_get_nodesc_array_type): Don't
+ vary types depending on debug info.
+
+2008-10-10 Alexandre Oliva <aoliva@redhat.com>
+
+ * c-gimplify.c (c_genericize): Don't refer to DECL_ASSEMBLER_NAME
+ before ensuring it's already computed.
+
+2008-10-09 Jakub Jelinek <jakub@redhat.com>
+
+ * rtl.h (locator_eq): New decl.
+ * cfglayout.c (locator_scope): New function.
+ (insn_scope): Use it.
+ (locator_eq): New function.
+ (fixup_reorder_chain): Search for last insn in src bb
+ that has locator set or first insn in dest bb. Use
+ locator_eq instead of == to compare locators.
+ * cfgrtl.c (cfg_layout_merge_blocks): Likewise.
+ * cfgcleanup.c (try_forward_edges): Use locator_eq instead of
+ == to compare locators.
+
+ * tree-ssa-live.c (remove_unused_locals): Mark all edge's goto_block
+ as used.
+ * gimple-low.c (lower_function_body, lower_gimple_return,
+ lower_builtin_setjmp): Set gimple_block on the newly created stmts.
+ * tree-cfg.c (make_cond_expr_edges, make_goto_expr_edges): Only set
+ goto_block on edges if goto_locus is known.
+
+ PR middle-end/37774
+ * tree.h (get_object_alignment): Declare.
+ * emit-rtl.c (set_mem_attributes_minus_bitpos): Call
+ get_object_alignment if needed.
+ * builtins.c (get_pointer_alignment): Move ADDR_EXPR operand handling
+ to ...
+ (get_object_alignment): ... here. New function. Try harder to
+ determine alignment from get_inner_reference returned offset.
+
+2008-10-08 Jakub Jelinek <jakub@redhat.com>
+
+ * graphite.c (gloog): Don't call find_unreachable_blocks
+ before delte_unreachable_blocks.
+
+ * cfgexpand.c (expand_gimple_cond): Convert also goto_block and
+ goto_locus of true_edge into RTL locator.
+
+2008-10-08 Uros Bizjak <ubizjak@gmail.com>
+
+ * config/i386/i386.md (*jcc_btdi_rex64): Clobber FLAGS_REG.
+ (*jcc_btdi_mask_rex64): Ditto.
+ (*jcc_btsi): Ditto.
+ (*jcc_btsi_mask): Ditto.
+ (*jcc_btsi_1): Ditto.
+ (*jcc_btsi_mask_1): Ditto.
+
+2008-10-08 Paul Brook <paul@codesourcery.com>
+
+ * config/arm/bpabi.h (ARM_FUNCTION_PROFILER): Define new EABI
+ compatible profiler (__gnu_mcount_nc).
+ (SUBTARGET_FRAME_POINTER_REQUIRED): Define.
+
+2008-10-08 H.J. Lu <hongjiu.lu@intel.com>
+
+ * config/i386/i386.c (initial_ix86_tune_features): Add
+ X86_TUNE_USE_VECTOR_FP_CONVERTS.
+ * config/i386/i386.h (ix86_tune_indices): Likewise.
+ (TARGET_USE_VECTOR_FP_CONVERTS): New.
+
+ * config/i386/i386.md: Check TARGET_USE_VECTOR_FP_CONVERTS
+ instead of (TARGET_USE_VECTOR_CONVERTS || TARGET_GENERIC)
+ for FP to FP splitters.
+
+2008-10-08 H.J. Lu <hongjiu.lu@intel.com>
+
+ * config/i386/i386.md: Add missing gen_sse2_cvtdq2p to convert
+ splitter.
+
+2008-10-08 Jakub Jelinek <jakub@redhat.com>
+
+ PR target/36635
+ PR target/37290
+ PR rtl-optimization/37341
+ * cse.c (cse_cc_succs): Add ORIG_BB argument, don't follow edges
+ to ORIG_BB, pass through ORIG_BB recursively.
+ (cse_condition_code_reg): Adjust caller.
+
+2008-10-08 Kai Tietz <kai.tietz@onevision.com>
+
+ * sdbout.c (sdbout_one_type): Treat the value type
+ CONST_DECL for enumerals.
+
+2008-10-07 H.J. Lu <hongjiu.lu@intel.com>
+
+ * config/i386/i386.md: Remove trailing white spaces.
+
+2008-10-07 Kenneth Zadeck <zadeck@naturalbridge.com>
+
+ PR rtl-optimization/37448
+ * alloc-pool.c (struct alloc_pool_descriptor) [elt_size]: New field.
+ (stuct alloc_pool_descriptor) [created, allocated, current, peak]:
+ Make unsigned long.
+ (struct output_info) [count]: Renamed total_created and made
+ unsigned long.
+ (struct output_info) [size]: Renamed total_allocated and made
+ unsigned long.
+ (create_alloc_pool, empty_alloc_pool, pool_alloc, pool_free):
+ Properly keep track of desc->size.
+ (print_statistics, dump_alloc_pool_statistics): Enhance the
+ printing of statistics to print the number of elements and to use
+ unsigned longs.
+
+2008-10-07 Jakub Jelinek <jakub@redhat.com>
+
+ PR middle-end/37576
+ * opts.h (CL_SAVE): Move up to flags range.
+ (CL_PARAMS, CL_WARNING, CL_OPTIMIZATION, CL_TARGET,
+ CL_COMMON): Renumber.
+ (CL_MIN_OPTION_CLASS): Set to CL_PARAMS.
+ * opts.c (common_handle_option): Revert last change.
+
+2008-10-07 H.J. Lu <hongjiu.lu@intel.com>
+
+ * config/i386/i386-protos.h (ix86_schedule): New.
+
+ * config/i386/i386.c (ix86_schedule): New.
+ (override_options): Add schedule to processor_alias_table. Set
+ ix86_schedule from the schedule field in processor_alias_table.
+ (ix86_function_specific_save): Save ix86_schedule.
+ (ix86_function_specific_restore): Restore ix86_schedule.
+
+ * config/i386/i386.md (cpu): Map to ix86_schedule instead of
+ ix86_tune. Add none and remove i386, i486, pentium4, nocona
+ and generic32.
+
+ * config/i386/i386.opt: Add schedule.
+
+ * config/i386/ppro.md: Remove generic32.
+
+2008-10-07 Simon Martin <simartin@users.sourceforge.net>
+
+ PR c/35437
+ * expr.c (count_type_elements): Handle ERROR_MARK.
+
+2008-10-07 Jakub Jelinek <jakub@redhat.com>
+
+ PR debug/29609
+ PR debug/36690
+ PR debug/37616
+ * basic-block.h (struct edge_def): Add goto_block field.
+ * cfglayout.c (fixup_reorder_chain): Ensure that there is at least
+ one insn with locus corresponding to edge's goto_locus if !optimize.
+ * profile.c (branch_prob): Copy edge's goto_block.
+ * cfgrtl.c (force_nonfallthru_and_redirect): Use goto_locus for
+ emitted jumps.
+ (cfg_layout_merge_blocks): Emit a nop with edge's goto_locus
+ locator in between the merged basic blocks if !optimize and needed.
+ * cfgexpand.c (expand_gimple_cond): Convert goto_block and
+ goto_locus into RTL locator. For unconditional jump use that
+ locator for the jump insn.
+ (expand_gimple_cond): Convert goto_block and goto_locus into
+ RTL locator for all remaining edges. For unconditional jump
+ use that locator for the jump insn.
+ * cfgcleanup.c (try_forward_edges): Avoid the optimization if
+ there is more than one edge or insn locator along the forwarding
+ edges and !optimize. If there is just one, set e->goto_locus.
+ * tree-cfg.c (make_cond_expr_edges, make_goto_expr_edges): Set also
+ edge's goto_block.
+ (move_block_to_fn): Adjust edge's goto_block.
+
+2008-10-07 H.J. Lu <hongjiu.lu@intel.com>
+
+ PR middle-end/37731
+ * expmed.c (expand_mult): Properly check DImode constant in
+ CONST_DOUBLE.
+
+2008-10-07 Jakub Jelinek <jakub@redhat.com>
+
+ PR debug/37738
+ * dwarf2out.c (common_block_die_table): New variable.
+ (common_block_die_table_hash, common_block_die_table_eq): New
+ functions.
+ (gen_variable_die): Look up a DW_TAG_common_block die for a particular
+ COMMON block in the current scope rather than globally. Optimize
+ DW_OP_addr SYMBOL_REF DW_OP_plus_uconst off into
+ DW_OP_addr SYMBOL_REF+off.
+
+2008-10-07 Eric Botcazou <ebotcazou@adacore.com>
+
+ * tree-ssa-loop-ivopts.c (may_be_nonaddressable_p) <VIEW_CONVERT_EXPR>:
+ Return true for non-addressable GIMPLE operands.
+
+2008-10-07 H.J. Lu <hongjiu.lu@intel.com>
+
+ PR target/24765
+ * config/i386/i386.c (initial_ix86_tune_features): Remove
+ X86_TUNE_USE_BIT_TEST.
+ * config/i386/i386.h (ix86_tune_indices): Likewise.
+ (TARGET_USE_BIT_TEST): Removed.
+
+2008-10-07 Bernhard Reutner-Fischer <aldot@gcc.gnu.org>
+
+ * config.gcc (arm*-*-*): Add aapcs-linux to supported ABIs.
+
+2008-10-06 Adam Nemet <anemet@caviumnetworks.com>
+
+ * config/mips/mips.md (mulsi3_mul3, muldi3_mul3): Merge these ...
+ (mul<mode>3_mul3): ... into this new template.
+
+2008-10-06 Aldy Hernandez <aldyh@redhat.com>
+
+ * gimplify.c (gimplify_arg): Add location argument. Use it.
+ (gimplify_call_expr): Pass location to gimplify_arg.
+ (gimplify_modify_expr_to_memcpy): Same.
+ (gimplify_modify_expr_to_memset): Same.
+
+2008-10-06 Andrew Pinski <andrew_pinski@playstation.sony.com>
+
+ * config/rs6000/rs6000-c.c (altivec_resolve_overloaded_builtin):
+ Update calls to build_unary_op and build_indirect_ref for location
+ changes.
+
+2008-10-06 Aldy Hernandez <aldyh@redhat.com>
+
+ build_modify_expr.
+ * c-decl.c (finish_decl): Pass input_location to build_unary_op.
+ * c-typeck.c (array_to_pointer_conversion): Pass location to
+ build_unary_op.
+ (function_to_pointer_conversion): Use error_at and warning_at.
+ (build_indirect_ref): Same.
+ (build_array_ref): Pass location to build_binary_op.
+ (parser_build_unary_op): Do not set location after calling
+ build_unary_op.
+ (build_unary_op): Add location argument. Use it throughout. Set
+ EXPR_LOCATION before returning new tree.
+ (build_modify_expr): Same.
+ (build_binary_op): Use location throughout. Set EXPR_LOCATION before
+ returning node.
+ * c-omp.c (c_finish_omp_atomic): Pass location to build_unary_op,
+ build_indirect_ref, build_modify_expr.
+ (c_finish_omp_for): Same. Use error_at instead of error.
+ * c-common.c (c_common_truthvalue_conversion): Pass location to
+ build_unary_op.
+ (warn_for_div_by_zero): Add location argument.
+ * c-common.h: Add argument to build_modify_expr, build_indirect_ref,
+ build_unary_op, warn_for_div_by_zero.
+ * c-parser.c (c_parser_typeof_specifier): Use
+ protected_set_expr_location.
+ (c_parser_statement_after_labels): Same.
+ (c_parser_condition): Same.
+ (c_parser_expr_no_commas): Pass correct location to build_modify_expr.
+ (c_parser_conditional_expression): Use protected_set_expr_location.
+ (c_parser_unary_expression): Pass location to build_indirect_ref.
+ (c_parser_postfix_expression_after_primary): Pass location to
+ build_indirect_ref, build_unary_op.
+ (c_parser_omp_for_loop): Set the increment expression's EXPR_LOCATION.
+
+2008-10-06 Joshua Kinard <kumba@gentoo.org>
+
+ * doc/invoke.texi: List r1x000 family under the -march MIPS option.
+ * config/mips/mips.h (PROCESSOR_R10000): New processor_type.
+ * config/mips/mips.c (mips_cpu_info_table): Add r10000, r12000,
+ r14000 and r16000.
+ (mips_rtx_cost_data): Add a PROCESSOR_R10000 entry.
+ (mips_issue_rate): Handle PROCESSOR_R10000.
+ * config/mips/mips.md (cpu): Add r10000.
+ Include r10000.md.
+ * config/mips/10000.md: New file.
+
+2008-10-06 Richard Sandiford <rdsandiford@googlemail.com>
+
+ * config/rs6000/rs6000-protos.h (rs6000_find_base_term): Declare.
+ * config/rs6000/rs6000.h (FIND_BASE_TERM): New macro.
+ * config/rs6000/rs6000.c (rs6000_find_base_term): New function.
+
+2008-10-06 Richard Sandiford <rdsandiford@googlemail.com>
+
+ * config/darwin-protos.h (machopic_function_base_name): Delete.
+ (machopic_function_base_sym): Likewise.
+ (machopic_gen_offset): Declare.
+ * config/darwin.h (MACHOPIC_FUNCTION_BASE_NAME): New macro.
+ (ASM_OUTPUT_LABELREF): Use it instead of a hard-coded string constant.
+ * config/darwin.c (machopic_function_base_name): Delete.
+ (machopic_function_base_sym): Likewise.
+ (gen_pic_offset): Rename to...
+ (machopic_gen_offset): ...this and remove the pic_base argument.
+ Instead use MACHO_DYNAMIC_NO_PIC_P to decide whether a PIC offset
+ is needed. Create an UNSPEC_MACHOPIC_OFFSET if so, and set
+ crtl->uses_pic_offset_table.
+ (machopic_indirect_data_reference): Use new machopic_gen_offset
+ interface.
+ (machopic_legitimize_pic_address): Likewise.
+ (machopic_operand_p): Check for UNSPEC_MACHOPIC_OFFSET.
+
+ * config/i386/darwin.h (GOT_SYMBOL_NAME): Use
+ MACHOPIC_FUNCTION_BASE_NAME instead of machopic_function_base_name.
+ * config/i386/i386.c (output_set_got): Likewise.
+ (darwin_local_data_pic): Check for an UNSPEC_MACHOPIC_OFFSET
+ instead of a MINUS.
+ (legitimate_pic_operand_p): Handle UNSPEC_MACHOPIC_OFFSET.
+ (legitimate_address_p): Likewise.
+ (output_pic_addr_const): Likewise.
+ (output_addr_const_extra): Likewise.
+ (ix86_delegitimize_address): Expect darwin_local_data_pic to
+ match an UNSPEC rather than a MINUS.
+ * config/i386/i386.md (UNSPEC_MACHOPIC_OFFSET): Define.
+ (builtin_setjmp_receiver): Use machopic_gen_offset.
+ * config/i386/predicates.md (pic_symbolic_operand): Handle
+ UNSPEC_MACHOPIC_OFFSET.
+
+ * config/rs6000/rs6000.c (rs6000_legitimize_reload_address):
+ Use machopic_gen_offset and machopic_operand_p.
+ (rs6000_output_addr_const_extra): Handle UNSPEC_MACHOPIC_OFFSET.
+ (rs6000_emit_prologue): Use MACHOPIC_FUNCTION_BASE_NAME.
+ * config/rs6000/rs6000.md (UNSPEC_MACHOPIC_OFFSET): Define.
+ (builtin_setjmp_receiver): Use MACHOPIC_FUNCTION_BASE_NAME.
+ Set crtl->uses_pic_offset_table.
+
+2008-10-06 Richard Sandiford <rdsandiford@googlemail.com>
+
+ * config/rs6000/rs6000-protos.h (rs6000_output_addr_const_extra):
+ Declare.
+ * config/rs6000/rs6000.h (OUTPUT_ADDR_CONST_EXTRA): New macro.
+ * config/rs6000/rs6000.md (UNSPEC_TOCREL): New constant.
+ * config/rs6000/rs6000.c (constant_pool_expr_1): Delete.
+ (constant_pool_expr_p): Use split_const and check the base.
+ (toc_relative_expr_p): Likewise, checking for an UNSPEC_TOCREL
+ instead of a MINUS.
+ (legitimate_constant_pool_address_p): Check toc_relative_p
+ instead of constant_pool_expr_p.
+ (print_operand_address): Always use output_addr_const for
+ constant pool addresses.
+ (rs6000_output_addr_const_extra): New function.
+ (create_TOC_reference): Create an UNSPEC_TOCREL instead of a MINUS.
+
+2008-10-06 Vladimir Makarov <vmakarov@redhat.com>
+
+ PR middle-end/37535
+
+ * ira-lives.c (mark_reg_live, mark_reg_dead): New functions.
+ (mark_ref_live, mark_ref_dead): Use them.
+ (def_conflicts_with_inputs_p): Remove.
+ (mark_early_clobbers): New function.
+ (process_bb_node_lives): Call preprocess_constraints and
+ mark_early_clobbers.
+
+ * doc/rtx.texi (clobber): Change how RA deals with clobbers.
+
+2008-10-06 Danny Smith <dannysmith@users.sourceforge.net>
+
+ * config/i386/mingw32.h (REAL_LIBGCC_SPEC): Add thread cleanup
+ lib with -mthread switch.
+
+2008-10-05 Dodji Seketeli <dodji@redhat.com>
+
+ PR c++/37410
+ * dwarf2out.c (dwarf2out_imported_module_or_decl): Split this
+ function in two, making it call a new and reusable
+ dwarf2out_imported_module_or_decl() that takes the containing
+ BLOCK of the declaration in argument.
+ (dwarf2out_imported_module_or_decl_real): New function.
+ (decls_for_scope, gen_decl_die, dwarf2out_decl): Take
+ IMPORTED_DECL in account.
+ * tree.def: Added IMPORTED_DECL node type.
+ * tree.h: Added accessors for IMPORTED_DECL nodes.
+ * tree.c (init_ttree): Initialise IMPORTED_DECL node type.
+
+2008-10-05 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ * doc/gimple.texi: Fix some typos, wrap some long lines,
+ fix some broken wraps with continuations.
+ * tree-ssa-reassoc.c: Fix comment typos.
+
+2000-10-04 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
+
+ PR target/37603
+ * pa.c (legitimize_pic_address): Force function labels to memory in
+ word mode.
+
+2008-10-04 Anton Blanchard <anton@samba.org>
+
+ * config/rs6000/rs6000.c (rs6000_emit_sync): Use gen_lwsync().
+ (rs6000_split_atomic_op): Same.
+ (rs6000_split_compare_and_swap): Same.
+ (rs6000_split_compare_and_swapqhi): Same.
+
+2008-10-04 Richard Guenther <rguenther@suse.de>
+
+ * tree-ssa-sccvn.c (vn_reference_op_eq): Use types_compatible_p
+ instead of pointer equality.
+ (vn_nary_op_eq): Likewise.
+
+2008-10-03 Andrew Pinski <andrew_pinski@playstation.sony.com>
+
+ * config/rs6000/rs6000.md (fseldfsf4): Add TARGET_SINGLE_FLOAT
+ condition.
+ (fselsfdf4): Make condition on "TARGET_HARD_FLOAT && TARGET_FPRS &&
+ TARGET_DOUBLE_FLOAT && TARGET_SINGLE_FLOAT".
+
+2008-10-03 Danny Smith <dannysmith@users.sourceforge.net>
+
+ * config/i386/winnt.c (i386_pe_strip_name_encoding_full):
+ Revert previous change.
+
+2008-10-03 Tom Tromey <tromey@redhat.com>
+
+ * stringpool.c (ggc_alloc_string): Terminate string.
+
+2008-10-03 Jakub Jelinek <jakub@redhat.com>
+
+ * gimplify.c (gimplify_function_tree): For -finstrument-functions
+ use gimple_bind_{,set_}block instead of gimple_{,set_}block.
+ * gimple.h (gimple_bind_set_block): Allow second argument to be NULL.
+
+ PR debug/37726
+ * gimplify.c (declare_vars): Use gimple_bind_block instead of
+ gimple_block.
+
+2008-10-03 Pascal Obry <obry@adacore.com>
+
+ * gcov.c (create_file_names): Properly handle UNIX and DOS
+ directory separators.
+ (make_gcov_file_name): Likewise + convert the ':' DOS drive
+ separator to '~' to ensure clean filenames on Windows.
+
+2008-10-02 Danny Smith <dannysmith@users.sourceforge.net>
+
+ * config/i386/winnt.c (i386_pe_strip_name_encoding_full):
+ Add a null terminator to the stripped name.
+
+2008-10-02 David Edelsohn <edelsohn@gnu.org>
+
+ * config/rs6000/rs6000.c (USE_FP_FOR_ARG_P): Revert
+ TARGET_DOUBLE_FLOAT, TARGET_SINGLE_FLOAT.
+ (function_arg_advance): Condition on TARGET_DOUBLE_FLOAT,
+ TARGET_SINGLE_FLOAT. Revert SCALAR_FLOAT_MODE_P condition.
+ (function_arg): Condition on TARGET_DOUBLE_FLOAT, TARGET_SINGLE_FLOAT.
+ (rs6000_function_value): Revert TARGET_DOUBLE_FLOAT,
+ TARGET_SINGLE_FLOAT.
+
2008-10-02 Daniel Jacobowitz <dan@codesourcery.com>
* builtins.c (fold_builtin_pow): Check for 0 ** NEGATIVE.
(vec_promote): Define.
2008-10-01 Andrew Pinski <andrew_pinski@playstation.sony.com>
- Yukishige Shibata <shibata@rd.scei.sony.co.jp>
- Trevor Smigiel <Trevor_Smigiel@playstation.sony.com>
+ Yukishige Shibata <shibata@rd.scei.sony.co.jp>
+ Trevor Smigiel <Trevor_Smigiel@playstation.sony.com>
* config/rs6000/rs6000-c.c (altivec_overloaded_builtins): Add Cell
Altivec intrinsics.
2008-09-22 Adam Nemet <anemet@caviumnetworks.com>
* config/mips/mips.h (ISA_HAS_BADDU): New macro.
- * config/mips/mips.md (*baddu_si_eb, *baddu_si_el,
- *baddu_di<mode>): New patterns.
+ * config/mips/mips.md (*baddu_si_eb, *baddu_si_el, *baddu_di<mode>):
+ New patterns.
2008-09-22 Richard Guenther <rguenther@suse.de>
PR target/37528
* config/i386/t-cygming (SHLIB_LC): Remove.
(SHLIB_LINK): Don't add static objects to SHLIB_IMPLIB
- * config/i386/t-cygwin (SHLIB_LC): Specify all required
- libraries.
+ * config/i386/t-cygwin (SHLIB_LC): Specify all required libraries.
2008-09-22 Hans-Peter Nilsson <hp@axis.com>
(SSA Operands): Rename from 'Statement Operands'.
* doc/generic.texi: New.
* doc/gimple.texi: New.
- * Makefile.in (TEXI_GCCINT_FILES): Add generic.texi and
- gimple.texi.
+ * Makefile.in (TEXI_GCCINT_FILES): Add generic.texi and gimple.texi.
* Makefile.in (TEXI_GCCINT_FILES):
* gimple.c (gimple_copy_call_skip_args): Rename from
giple_copy_call_skip_args. Update all users.
2008-09-18 Alexander Monakov <amonakov@ispras.ru>
PR middle-end/37499
- * sched-int.h (struct _haifa_insn_data): Remove unused field
- ref_count.
+ * sched-int.h (struct _haifa_insn_data): Remove unused field ref_count.
* sched-rgn.c (ref_counts): Remove.
(insn_referenced): New static variable.
* haifa-sched.c (dep_cost_1): Recognize the producer even if the
consumer is an asm. Add comment why this is important.
(choose_ready): Add comment to the "INSN_CODE (insn) >= 0 ||
- recog_memoized (insn) < 0" assert. Put ENABLE_CHECKING around
- it.
+ recog_memoized (insn) < 0" assert. Put ENABLE_CHECKING around it.
2008-09-17 Joseph Myers <joseph@codesourcery.com>
* ira-emit.c (change_loop): Use all_allocnos.
- * ira-build.c (create_loop_tree_nodes, finish_loop_tree_node):
- Ditto.
- (ira_create_allocno): Set up all_allocnos bit for the created
- allocno.
+ * ira-build.c (create_loop_tree_nodes, finish_loop_tree_node): Ditto.
+ (ira_create_allocno): Set up all_allocnos bit for the created allocno.
(create_cap_allocno): Remove setting mentioned_allocnos.
(create_insn_allocnos): Ditto.
(remove_unnecessary_allocnos): Use all_allocnos.