#! /usr/bin/perl -w
+# Copyright (C) 1999, 2000, 2001, 2003 Free Software Foundation, Inc.
+
+# This file is part of GCC.
+
+# GCC is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# GCC is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with GCC; see the file COPYING. If not, write to
+# the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+# Boston MA 02110-1301, USA.
+
# This does trivial (and I mean _trivial_) conversion of Texinfo
# markup to Perl POD format. It's intended to be used to extract
# something suitable for a manpage from a Texinfo document.
@icstack = ();
@endwstack = ();
@skstack = ();
+@instack = ();
$shift = "";
%defs = ();
$fnno = 1;
+$inf = "";
+$ibase = "";
+@ipath = ();
while ($_ = shift) {
if (/^-D(.*)$/) {
} else {
$flag = shift;
}
+ $value = "";
+ ($flag, $value) = ($flag =~ /^([^=]+)(?:=(.+))?/);
die "no flag specified for -D\n"
unless $flag ne "";
- die "flags may only contain letters, digits, hyphens, and underscores\n"
+ die "flags may only contain letters, digits, hyphens, dashes and underscores\n"
unless $flag =~ /^[a-zA-Z0-9_-]+$/;
- $defs{$flag} = "";
+ $defs{$flag} = $value;
+ } elsif (/^-I(.*)$/) {
+ if ($1 ne "") {
+ $flag = $1;
+ } else {
+ $flag = shift;
+ }
+ push (@ipath, $flag);
} elsif (/^-/) {
usage();
} else {
}
if (defined $in) {
- open(STDIN, $in) or die "opening \"$in\": $!\n";
+ $inf = gensym();
+ open($inf, "<$in") or die "opening \"$in\": $!\n";
+ $ibase = $1 if $in =~ m|^(.+)/[^/]+$|;
+} else {
+ $inf = \*STDIN;
}
+
if (defined $out) {
open(STDOUT, ">$out") or die "opening \"$out\": $!\n";
}
-while(<STDIN>)
-{
+while(defined $inf) {
+while(<$inf>) {
# Certain commands are discarded without further processing.
/^\@(?:
[a-z]+index # @*index: useful only in complete manual
|(?:end\s+)?group # @group .. @end group: ditto
|page # @page: ditto
|node # @node: useful only in .info file
+ |(?:end\s+)?ifnottex # @ifnottex .. @end ifnottex: use contents
)\b/x and next;
-
+
chomp;
# Look for filename and title markers.
/^\@setfilename\s+([^.]+)/ and $fn = $1, next;
- /^\@settitle\s+([^.]+)/ and $tl = $1, next;
+ /^\@settitle\s+([^.]+)/ and $tl = postprocess($1), next;
+
+ # Identify a man title but keep only the one we are interested in.
+ /^\@c\s+man\s+title\s+([A-Za-z0-9-]+)\s+(.+)/ and do {
+ if (exists $defs{$1}) {
+ $fn = $1;
+ $tl = postprocess($2);
+ }
+ next;
+ };
# Look for blocks surrounded by @c man begin SECTION ... @c man end.
# This really oughta be @ifman ... @end ifman and the like, but such
# would require rev'ing all other Texinfo translators.
- /^\@c man begin ([A-Z]+)/ and $sect = $1, $output = 1, next;
- /^\@c man end/ and do {
+ /^\@c\s+man\s+begin\s+([A-Z]+)\s+([A-Za-z0-9-]+)/ and do {
+ $output = 1 if exists $defs{$2};
+ $sect = $1;
+ next;
+ };
+ /^\@c\s+man\s+begin\s+([A-Z]+)/ and $sect = $1, $output = 1, next;
+ /^\@c\s+man\s+end/ and do {
$sects{$sect} = "" unless exists $sects{$sect};
$sects{$sect} .= postprocess($section);
$section = "";
$output = 0;
next;
};
+
+ # handle variables
+ /^\@set\s+([a-zA-Z0-9_-]+)\s*(.*)$/ and do {
+ $defs{$1} = $2;
+ next;
+ };
+ /^\@clear\s+([a-zA-Z0-9_-]+)/ and do {
+ delete $defs{$1};
+ next;
+ };
+
next unless $output;
# Discard comments. (Can't do it above, because then we'd never see
# Ignore @end foo, where foo is not an operation which may
# cause us to skip, if we are presently skipping.
my $ended = $1;
- next if $skipping && $ended !~ /^(?:ifset|ifclear|ignore|menu)$/;
+ next if $skipping && $ended !~ /^(?:ifset|ifclear|ignore|menu|iftex|copying)$/;
die "\@end $ended without \@$ended at line $.\n" unless defined $endw;
die "\@$endw ended by \@end $ended at line $.\n" unless $ended eq $endw;
$endw = pop @endwstack;
- if ($ended =~ /^(?:ifset|ifclear|ignore|menu)$/) {
+ if ($ended =~ /^(?:ifset|ifclear|ignore|menu|iftex)$/) {
$skipping = pop @skstack;
next;
- } elsif ($ended =~ /^(?:example|smallexample)$/) {
+ } elsif ($ended =~ /^(?:example|smallexample|display)$/) {
$shift = "";
$_ = ""; # need a paragraph break
- } elsif ($ended =~ /^(?:itemize|enumerate|table)$/) {
+ } elsif ($ended =~ /^(?:itemize|enumerate|[fv]?table)$/) {
$_ = "\n=back\n";
$ic = pop @icstack;
} else {
next;
};
- /^\@(ignore|menu)\b/ and do {
+ /^\@(ignore|menu|iftex|copying)\b/ and do {
push @endwstack, $endw;
push @skstack, $skipping;
$endw = $1;
s/\@TeX\{\}/TeX/g;
s/\@pounds\{\}/\#/g;
s/\@minus(?:\{\})?/-/g;
+ s/\\,/,/g;
# Now the ones that have to be replaced by special escapes
# (which will be turned back into text by unmunge())
s/\@\{/{/g;
s/\@\}/}/g;
s/\@\@/&at;/g;
+
+ # Inside a verbatim block, handle @var specially.
+ if ($shift ne "") {
+ s/\@var\{([^\}]*)\}/<$1>/g;
+ }
+
# POD doesn't interpret E<> inside a verbatim block.
if ($shift eq "") {
s/</</g;
}
# Single line command handlers.
- /^\@set\s+([a-zA-Z0-9_-]+)\s*(.*)$/ and $defs{$1} = $2, next;
- /^\@clear\s+([a-zA-Z0-9_-]+)/ and delete $defs{$1}, next;
- /^\@section\s+(.+)$/ and $_ = "\n=head2 $1\n";
- /^\@subsection\s+(.+)$/ and $_ = "\n=head3 $1\n";
+ /^\@include\s+(.+)$/ and do {
+ push @instack, $inf;
+ $inf = gensym();
+ $file = postprocess($1);
+
+ # Try cwd and $ibase, then explicit -I paths.
+ $done = 0;
+ foreach $path (".", $ibase, @ipath) {
+ open($inf, "<" . $path . "/" . $file) and ($done = 1, last);
+ }
+ die "cannot find $file" if !$done;
+ next;
+ };
+
+ /^\@(?:section|unnumbered|unnumberedsec|center)\s+(.+)$/
+ and $_ = "\n=head2 $1\n";
+ /^\@subsection\s+(.+)$/
+ and $_ = "\n=head3 $1\n";
# Block command handlers:
- /^\@itemize\s+(\@[a-z]+|\*|-)/ and do {
+ /^\@itemize(?:\s+(\@[a-z]+|\*|-))?/ and do {
push @endwstack, $endw;
push @icstack, $ic;
- $ic = $1;
+ if (defined $1) {
+ $ic = $1;
+ } else {
+ $ic = '@bullet';
+ }
$_ = "\n=over 4\n";
$endw = "itemize";
};
- /^\@enumerate(?:\s+([A-Z0-9]+))?/ and do {
+ /^\@enumerate(?:\s+([a-zA-Z0-9]+))?/ and do {
push @endwstack, $endw;
push @icstack, $ic;
if (defined $1) {
$endw = "enumerate";
};
- /^\@table\s+(\@[a-z]+)/ and do {
+ /^\@([fv]?table)\s+(\@[a-z]+)/ and do {
push @endwstack, $endw;
push @icstack, $ic;
- $ic = $1;
- $ic =~ s/\@(?:samp|strong|key)/B/;
+ $endw = $1;
+ $ic = $2;
+ $ic =~ s/\@(?:samp|strong|key|gcctabopt|env)/B/;
$ic =~ s/\@(?:code|kbd)/C/;
$ic =~ s/\@(?:dfn|var|emph|cite|i)/I/;
$ic =~ s/\@(?:file)/F/;
$_ = "\n=over 4\n";
- $endw = "table";
};
- /^\@((?:small)?example)/ and do {
+ /^\@((?:small)?example|display)/ and do {
push @endwstack, $endw;
$endw = $1;
$shift = "\t";
$_ = "\n=item $ic\<$1\>\n";
} else {
$_ = "\n=item $ic\n";
- $ic =~ y/A-Ya-y1-8/B-Zb-z2-9/;
+ $ic =~ y/A-Ya-y/B-Zb-z/;
+ $ic =~ s/(\d+)/$1 + 1/eg;
}
};
$section .= $shift.$_."\n";
}
+# End of current file.
+close($inf);
+$inf = pop @instack;
+}
die "No filename or title\n" unless defined $fn && defined $tl;
local $_ = $_[0];
# @value{foo} is replaced by whatever 'foo' is defined as.
- s/\@value\{([a-zA-Z0-9_-]+)\}/$defs{$1}/g;
+ while (m/(\@value\{([a-zA-Z0-9_-]+)\})/g) {
+ if (! exists $defs{$2}) {
+ print STDERR "Option $2 not defined\n";
+ s/\Q$1\E//;
+ } else {
+ $value = $defs{$2};
+ s/\Q$1\E/$value/;
+ }
+ }
# Formatting commands.
+ # Temporary escape for @r.
+ s/\@r\{([^\}]*)\}/R<$1>/g;
s/\@(?:dfn|var|emph|cite|i)\{([^\}]*)\}/I<$1>/g;
s/\@(?:code|kbd)\{([^\}]*)\}/C<$1>/g;
- s/\@(?:samp|strong|key|option|env|b)\{([^\}]*)\}/B<$1>/g;
+ s/\@(?:gccoptlist|samp|strong|key|option|env|command|b)\{([^\}]*)\}/B<$1>/g;
s/\@sc\{([^\}]*)\}/\U$1/g;
s/\@file\{([^\}]*)\}/F<$1>/g;
s/\@w\{([^\}]*)\}/S<$1>/g;
s/\@(?:dmn|math)\{([^\}]*)\}/$1/g;
+ # keep references of the form @ref{...}, print them bold
+ s/\@(?:ref)\{([^\}]*)\}/B<$1>/g;
+
+ # Change double single quotes to double quotes.
+ s/''/"/g;
+ s/``/"/g;
+
# Cross references are thrown away, as are @noindent and @refill.
# (@noindent is impossible in .pod, and @refill is unnecessary.)
# @* is also impossible in .pod; we discard it and any newline that
- # follows it.
+ # follows it. Similarly, our macro @gol must be discarded.
- s/\@xref\{(?:[^\}]*)\}[^.]*.//g;
+ s/\(?\@xref\{(?:[^\}]*)\}(?:[^.<]|(?:<[^<>]*>))*\.\)?//g;
s/\s+\(\@pxref\{(?:[^\}]*)\}\)//g;
s/;\s+\@pxref\{(?:[^\}]*)\}//g;
s/\@noindent\s*//g;
s/\@refill//g;
+ s/\@gol//g;
s/\@\*\s*\n?//g;
# @uref can take one, two, or three arguments, with different
# semantics each time. @url and @email are just like @uref with
# one argument, for our purposes.
- s/\@(?:uref|url|email)\{([^\},]*)\}/<C<$1>>/g;
+ s/\@(?:uref|url|email)\{([^\},]*)\}/<B<$1>>/g;
s/\@uref\{([^\},]*),([^\},]*)\}/$2 (C<$1>)/g;
s/\@uref\{([^\},]*),([^\},]*),([^\},]*)\}/$3/g;
- # Turn B<blah I<blah> blah> into B<blah> I<blah> B<blah> to
- # match Texinfo semantics of @emph inside @samp.
+ # Un-escape <> at this point.
s/</</g;
s/>/>/g;
- 1 while (s/B<([^<>]*)I<([^>]+)>/B<$1>I<$2>B</g);
- 1 while (s/I<([^<>]*)B<([^>]+)>/I<$1>B<$2>I</g);
+
+ # Now un-nest all B<>, I<>, R<>. Theoretically we could have
+ # indefinitely deep nesting; in practice, one level suffices.
+ 1 while s/([BIR])<([^<>]*)([BIR])<([^<>]*)>/$1<$2>$3<$4>$1</g;
+
+ # Replace R<...> with bare ...; eliminate empty markup, B<>;
+ # shift white space at the ends of [BI]<...> expressions outside
+ # the expression.
+ s/R<([^<>]*)>/$1/g;
s/[BI]<>//g;
s/([BI])<(\s+)([^>]+)>/$2$1<$3>/g;
s/([BI])<([^>]+?)(\s+)>/$1<$2>$3/g;
$sects{FOOTNOTES} .= $_[0];
$sects{FOOTNOTES} .= "\n\n";
}
-
+
+# stolen from Symbol.pm
+{
+ my $genseq = 0;
+ sub gensym
+ {
+ my $name = "GEN" . $genseq++;
+ my $ref = \*{$name};
+ delete $::{$name};
+ return $ref;
+ }
+}
OSDN Git Service
