with_build_libsubdir
enable_gold
enable_ld
+enable_libquadmath
+enable_libquadmath_support
enable_libada
enable_libssp
enable_build_with_cxx
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--enable-gold[=ARG] build gold [ARG={default,yes,no}]
- --enable-ld[=ARG] build ld [ARG={default,yes,no}]
+ --enable-ld[=ARG] build ld [ARG={default,yes,no}]
+ --disable-libquadmath do not build libquadmath directory
+ --disable-libquadmath-support
+ disable libquadmath support for Fortran
--enable-libada build libada directory
--enable-libssp build libssp directory
--enable-build-with-cxx build with C++ compiler instead of C compiler
- --disable-ppl-version-check disable check for PPL version
+ --disable-ppl-version-check
+ disable check for PPL version
--enable-cloog-backend[=BACKEND]
set the CLooG BACKEND used to either isl, ppl or
ppl-legacy (default)
--disable-cloog-version-check
disable check for CLooG version
--enable-lto enable link time optimization support
- --enable-stage1-languages[=all] choose additional languages to build during
- stage1. Mostly useful for compiler development.
- --enable-objc-gc enable use of Boehm's garbage collector with the
- GNU Objective-C runtime
+ --enable-stage1-languages[=all]
+ choose additional languages to build during stage1.
+ Mostly useful for compiler development
+ --enable-objc-gc enable use of Boehm's garbage collector with the GNU
+ Objective-C runtime
--enable-bootstrap enable bootstrapping [yes if native build]
--enable-serial-[{host,target,build}-]configure
- force sequential configuration of
- sub-packages for the host, target or build
- machine, or all sub-packages
- --enable-maintainer-mode enable make rules and dependencies not useful
- (and sometimes confusing) to the casual installer
- --enable-stage1-checking[=all] choose additional checking for stage1
- of the compiler
+ force sequential configuration of sub-packages for
+ the host, target or build machine, or all
+ sub-packages
+ --enable-maintainer-mode
+ enable make rules and dependencies not useful (and
+ sometimes confusing) to the casual installer
+ --enable-stage1-checking[=all]
+ choose additional checking for stage1 of the
+ compiler
--enable-werror enable -Werror in bootstrap stage2 and later
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-build-libsubdir=DIR Directory where to find libraries for build system
- --with-mpc=PATH specify prefix directory for installed MPC package.
- Equivalent to --with-mpc-include=PATH/include
- plus --with-mpc-lib=PATH/lib
- --with-mpc-include=PATH
- specify directory for installed MPC include files
- --with-mpc-lib=PATH specify directory for the installed MPC library
+ --with-mpc=PATH specify prefix directory for installed MPC package.
+ Equivalent to --with-mpc-include=PATH/include plus
+ --with-mpc-lib=PATH/lib
+ --with-mpc-include=PATH specify directory for installed MPC include files
+ --with-mpc-lib=PATH specify directory for the installed MPC library
--with-mpfr-dir=PATH this option has been REMOVED
--with-mpfr=PATH specify prefix directory for installed MPFR package.
- Equivalent to --with-mpfr-include=PATH/include
- plus --with-mpfr-lib=PATH/lib
+ Equivalent to --with-mpfr-include=PATH/include plus
+ --with-mpfr-lib=PATH/lib
--with-mpfr-include=PATH
specify directory for installed MPFR include files
--with-mpfr-lib=PATH specify directory for the installed MPFR library
--with-gmp-dir=PATH this option has been REMOVED
- --with-gmp=PATH specify prefix directory for the installed GMP package.
- Equivalent to --with-gmp-include=PATH/include
- plus --with-gmp-lib=PATH/lib
+ --with-gmp=PATH specify prefix directory for the installed GMP
+ package. Equivalent to
+ --with-gmp-include=PATH/include plus
+ --with-gmp-lib=PATH/lib
--with-gmp-include=PATH specify directory for installed GMP include files
--with-gmp-lib=PATH specify directory for the installed GMP library
- --with-host-libstdcxx=L Use linker arguments L to link with libstdc++
- when linking with PPL
- --with-stage1-ldflags=FLAGS Linker flags for stage1
- -with-stage1-libs=LIBS Libraries for stage1
- --with-boot-libs=LIBS Libraries for stage2 and later
- --with-boot-ldflags=FLAGS Linker flags for stage2 and later
- --with-ppl=PATH Specify prefix directory for the installed PPL package
- Equivalent to --with-ppl-include=PATH/include
- plus --with-ppl-lib=PATH/lib
- --with-ppl-include=PATH Specify directory for installed PPL include files
- --with-ppl-lib=PATH Specify the directory for the installed PPL library
+ --with-host-libstdcxx=L use linker arguments L to link with libstdc++ when
+ linking with PPL
+ --with-stage1-ldflags=FLAGS
+ linker flags for stage1
+ --with-stage1-libs=LIBS libraries for stage1
+ --with-boot-libs=LIBS libraries for stage2 and later
+ --with-boot-ldflags=FLAGS
+ linker flags for stage2 and later
+ --with-ppl=PATH specify prefix directory for the installed PPL
+ package. Equivalent to
+ --with-ppl-include=PATH/include plus
+ --with-ppl-lib=PATH/lib
+ --with-ppl-include=PATH specify directory for installed PPL include files
+ --with-ppl-lib=PATH specify directory for the installed PPL library
--with-cloog=PATH Specify prefix directory for the installed CLooG-PPL
package. Equivalent to
--with-cloog-include=PATH/include plus
--with-build-sysroot=SYSROOT
use sysroot as the system root during the build
--with-debug-prefix-map='A=B C=D ...'
- map A to B, C to D ... in debug information
---with-build-config='NAME NAME2...'
- Use config/NAME.mk build configuration
+ map A to B, C to D ... in debug information
+ --with-build-config='NAME NAME2...'
+ use config/NAME.mk build configuration
--with-build-time-tools=PATH
use given path to find target tools during the build
hppa*64*-*-*)
noconfigdirs="$noconfigdirs byacc"
;;
- i[3456789]86-*-vsta)
- noconfigdirs="$noconfigdirs tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl gnuserv gettext"
- ;;
- i[3456789]86-*-go32* | i[3456789]86-*-msdosdjgpp*)
+ i[3456789]86-*-msdosdjgpp*)
noconfigdirs="$noconfigdirs tcl tk expect dejagnu send-pr uudecode guile itcl gnuserv libffi"
;;
x86_64-*-mingw*)
# noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl gnuserv"
noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool newlib"
;;
- i[3456789]86-*-beos*)
- noconfigdirs="$noconfigdirs tk itcl libgui gdb"
- ;;
*-*-cygwin*)
noconfigdirs="$noconfigdirs autoconf automake send-pr rcs guile perl"
;;
*-*-netbsd*)
noconfigdirs="$noconfigdirs rcs"
;;
- ppc*-*-pe)
- noconfigdirs="$noconfigdirs patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl gnuserv"
- ;;
- powerpc-*-beos*)
- noconfigdirs="$noconfigdirs tk itcl libgui gdb dejagnu readline"
- ;;
esac
+# Check whether --enable-libquadmath was given.
+if test "${enable_libquadmath+set}" = set; then :
+ enableval=$enable_libquadmath; ENABLE_LIBQUADMATH=$enableval
+else
+ ENABLE_LIBQUADMATH=yes
+fi
+
+if test "${ENABLE_LIBQUADMATH}" = "no" ; then
+ noconfigdirs="$noconfigdirs target-libquadmath"
+fi
+
+
+# Check whether --enable-libquadmath-support was given.
+if test "${enable_libquadmath_support+set}" = set; then :
+ enableval=$enable_libquadmath_support; ENABLE_LIBQUADMATH_SUPPORT=$enableval
+else
+ ENABLE_LIBQUADMATH_SUPPORT=yes
+fi
+
+enable_libquadmath_support=
+if test "${ENABLE_LIBQUADMATH_SUPPORT}" = "no" ; then
+ enable_libquadmath_support=no
+fi
+
+
# Check whether --enable-libada was given.
if test "${enable_libada+set}" = set; then :
enableval=$enable_libada; ENABLE_LIBADA=$enableval
# Make sure we get it printed in the list of not supported target libs.
# Don't disable libffi, though, other languages use it.
noconfigdirs="$noconfigdirs `echo ${libgcj} | sed -e 's/target-libffi//'`"
+ # Clear libgcj_saved so that even if java is enabled libffi won't be
+ # built.
+ libgcj_saved=
;;
esac
libgloss_dir=wince
;;
arc-*-*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
- arm-semi-aof )
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
- arm-*-coff | strongarm-*-coff | xscale-*-coff)
+ arm-*-coff)
noconfigdirs="$noconfigdirs ${libgcj}"
libgloss_dir=arm
;;
- arm-*-elf* | strongarm-*-elf* | xscale-*-elf* | arm*-*-eabi* )
+ arm-*-elf* | arm*-*-eabi* )
noconfigdirs="$noconfigdirs target-libffi target-qthreads"
libgloss_dir=arm
;;
arm-*-pe*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
- thumb-*-coff)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
- thumb-*-elf)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
- thumb-*-pe)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
arm-*-riscix*)
noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
;;
;;
bfin-*-*)
unsupported_languages="$unsupported_languages java"
- noconfigdirs="$noconfigdirs target-boehm-gc gdb"
+ noconfigdirs="$noconfigdirs target-boehm-gc"
if test x${is_cross_compiler} != xno ; then
target_configdirs="${target_configdirs} target-bsp target-cygmon"
fi
*-*-aout)
unsupported_languages="$unsupported_languages fortran"
noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
- *-*-elf)
- noconfigdirs="$noconfigdirs target-boehm-gc";;
+ *-*-elf) # See PR46792 regarding target-libffi.
+ noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
*-*-linux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss";;
*)
esac
libgloss_dir=cris
;;
- crx-*-*)
- noconfigdirs="$noconfigdirs target-libstdc++-v3 target-mudflap ${libgcj}"
- ;;
d10v-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
;;
d30v-*-*)
noconfigdirs="$noconfigdirs ${libgcj} gdb"
;;
- ep9312-*-elf | ep9312-*-coff)
- libgloss_dir=arm
- ;;
fr30-*-elf*)
noconfigdirs="$noconfigdirs ${libgcj} gdb"
;;
;;
hppa1.1-*-osf* | hppa1.1-*-bsd* )
;;
- hppa*64*-*-linux* | parisc*64*-*-linux*)
+ hppa*64*-*-linux*)
# In this case, it's because the hppa64-linux target is for
# the kernel only at this point and has no libc, and thus no
# headers, crt*.o, etc., all of which are needed by these.
noconfigdirs="$noconfigdirs target-zlib"
;;
- parisc*-*-linux* | hppa*-*-linux*)
+ hppa*-*-linux*)
;;
hppa*-*-*elf* | \
hppa*-*-lites* | \
noconfigdirs="$noconfigdirs readline mmalloc libgui itcl gdb"
;;
ia64*-**-hpux*)
- # No gdb or ld support yet.
- noconfigdirs="$noconfigdirs ${libgcj} readline mmalloc libgui itcl gdb ld"
+ # No ld support yet.
+ noconfigdirs="$noconfigdirs ${libgcj} libgui itcl ld"
;;
ia64*-*-*vms*)
# No gdb or ld support yet.
noconfigdirs="$noconfigdirs ${libgcj} tix readline mmalloc libgui itcl gdb ld"
;;
- i370-*-opened*)
- ;;
i[3456789]86-*-coff | i[3456789]86-*-elf)
noconfigdirs="$noconfigdirs ${libgcj}"
libgloss_dir=i386
echo "Warning: winsup/cygwin is missing so newlib can't be built."
fi
;;
- i[3456789]86-moss-msdos | i[3456789]86-*-moss* | \
- i[3456789]86-*-uwin* | i[3456789]86-*-interix* )
+ i[3456789]86-*-interix* )
;;
i[3456789]86-*-pe)
- noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
i[3456789]86-*-sco3.2v5*)
# The linker does not yet know about weak symbols in COFF,
noconfigdirs="$noconfigdirs ${libgcj}"
;;
m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
- noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libiberty"
libgloss_dir=m68hc11
;;
m68k-*-elf*)
m68*-*-* | fido-*-*)
libgloss_dir=m68k
;;
- mcore-*-pe*)
- # The EPOC C++ environment does not support exceptions or rtti,
- # and so building libstdc++-v3 tends not to always work.
- noconfigdirs="$noconfigdirs target-libstdc++-v3"
- ;;
mmix-*-*)
noconfigdirs="$noconfigdirs target-libffi target-boehm-gc gdb libgloss"
unsupported_languages="$unsupported_languages fortran java"
mt-*-*)
noconfigdirs="$noconfigdirs sim"
;;
+ picochip-*-*)
+ noconfigdirs="$noconfigdirs target-libiberty"
+ ;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp target-newlib ${libgcj}"
;;
- powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
+ powerpc*-*-winnt* | powerpc*-*-pe*)
target_configdirs="$target_configdirs target-winsup"
noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl gnuserv ${libgcj}"
# always build newlib.
;;
sh-*-* | sh64-*-*)
case "${host}" in
- i[3456789]86-*-vsta) ;; # don't add gprof back in
- i[3456789]86-*-go32*) ;; # don't add gprof back in
i[3456789]86-*-msdosdjgpp*) ;; # don't add gprof back in
*) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
esac
esac
# Work in distributions that contain no compiler tools, like Autoconf.
-tentative_cc=""
host_makefile_frag=/dev/null
if test -d ${srcdir}/config ; then
case "${host}" in
- m68k-hp-hpux*)
- # Avoid "too much defining" errors from HPUX compiler.
- tentative_cc="cc -Wp,-H256000"
- # If "ar" in $PATH is GNU ar, the symbol table may need rebuilding.
- # If it's HP/UX ar, this should be harmless.
- RANLIB="ar ts"
- ;;
- m68k-apollo-sysv*)
- tentative_cc="cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DUSG"
- ;;
- m68k-apollo-bsd*)
- #None of the Apollo compilers can compile gas or binutils. The preprocessor
- # chokes on bfd, the compiler won't let you assign integers to enums, and
- # other problems. Defining CC to gcc is a questionable way to say "don't use
- # the apollo compiler" (the preferred version of GCC could be called cc,
- # or whatever), but I'm not sure leaving CC as cc is any better...
- #CC=cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DNO_STDARG
- # Used to have BISON=yacc.
- tentative_cc=gcc
- ;;
- m88k-dg-dgux*)
- tentative_cc="gcc -Wall -ansi -D__using_DGUX"
- ;;
- m88k-harris-cxux*)
- # Under CX/UX, we want to tell the compiler to use ANSI mode.
- tentative_cc="cc -Xa"
- host_makefile_frag="config/mh-cxux"
- ;;
- m88k-motorola-sysv*)
- ;;
- mips*-dec-ultrix*)
- tentative_cc="cc -Wf,-XNg1000"
- host_makefile_frag="config/mh-decstation"
- ;;
- mips*-nec-sysv4*)
- # The C compiler on NEC MIPS SVR4 needs bigger tables.
- tentative_cc="cc -ZXNd=5000 -ZXNg=1000"
- host_makefile_frag="config/mh-necv4"
- ;;
- mips*-sgi-irix4*)
- # Tell compiler to use K&R C. We can't compile under the SGI Ansi
- # environment. Also bump switch table size so that cp-parse will
- # compile. Bump string length limit so linker builds.
- tentative_cc="cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000 -Wf,-XNl8192"
- ;;
- mips*-*-sysv4*)
- host_makefile_frag="config/mh-sysv4"
- ;;
- mips*-*-sysv*)
- # This is for a MIPS running RISC/os 4.52C.
-
- # This is needed for GDB, but needs to be in the top-level make because
- # if a library is compiled with the bsd headers and gets linked with the
- # sysv system libraries all hell can break loose (e.g. a jmp_buf might be
- # a different size).
- # ptrace(2) apparently has problems in the BSD environment. No workaround is
- # known except to select the sysv environment. Could we use /proc instead?
- # These "sysv environments" and "bsd environments" often end up being a pain.
- #
- # This is not part of CFLAGS because perhaps not all C compilers have this
- # option.
- tentative_cc="cc -systype sysv"
- ;;
- i370-ibm-opened*)
- tentative_cc="c89"
- ;;
- i[3456789]86-*-sysv5*)
- host_makefile_frag="config/mh-sysv5"
- ;;
- i[3456789]86-*-dgux*)
- tentative_cc="gcc -Wall -ansi -D__using_DGUX"
- host_makefile_frag="config/mh-dgux386"
- ;;
- i[3456789]86-ncr-sysv4.3*)
- # The MetaWare compiler will generate a copyright message unless you
- # turn it off by adding the -Hnocopyr flag.
- tentative_cc="cc -Hnocopyr"
- ;;
- i[3456789]86-ncr-sysv4*)
- # for an NCR 3000 (i486/SVR4) system.
- # The NCR 3000 ships with a MetaWare compiler installed as /bin/cc.
- # This compiler not only emits obnoxious copyright messages every time
- # you run it, but it chokes and dies on a whole bunch of GNU source
- # files. Default to using the AT&T compiler installed in /usr/ccs/ATT/cc.
- tentative_cc="/usr/ccs/ATT/cc"
- host_makefile_frag="config/mh-ncr3000"
- ;;
- i[3456789]86-*-sco3.2v5*)
- ;;
- i[3456789]86-*-sco*)
- # The native C compiler botches some simple uses of const. Unfortunately,
- # it doesn't defined anything like "__sco__" for us to test for in ansidecl.h.
- tentative_cc="cc -Dconst="
- host_makefile_frag="config/mh-sco"
- ;;
- i[3456789]86-*-udk*)
- host_makefile_frag="config/mh-sysv5"
- ;;
- i[3456789]86-*-solaris2*)
- host_makefile_frag="config/mh-sysv4"
- ;;
i[3456789]86-*-msdosdjgpp*)
host_makefile_frag="config/mh-djgpp"
;;
*-interix*)
host_makefile_frag="config/mh-interix"
;;
- vax-*-ultrix2*)
- # The old BSD pcc isn't up to compiling parts of gdb so use gcc
- tentative_cc=gcc
- ;;
- *-*-solaris2*)
- host_makefile_frag="config/mh-solaris"
- ;;
- m68k-sun-sunos*)
- # Sun's C compiler needs the -J flag to be able to compile cp-parse.c
- # without overflowing the jump tables (-J says to use a 32 bit table)
- tentative_cc="cc -J"
- ;;
hppa*-hp-hpux10*)
- tentative_cc="cc -Wp,-H256000"
host_makefile_frag="config/mh-pa-hpux10"
;;
- hppa*-hp-hpux* | hppa*-*-hiux*)
- tentative_cc="cc -Wp,-H256000"
+ hppa*-hp-hpux*)
host_makefile_frag="config/mh-pa"
;;
hppa*-*)
host_makefile_frag="config/mh-pa"
;;
- *-hp-hpux* | *-*-hiux*)
- tentative_cc="cc -Wp,-H256000"
- ;;
- rs6000-*-lynxos*)
- # /bin/cc is less than useful for our purposes. Always use GCC
- tentative_cc="/usr/cygnus/progressive/bin/gcc"
- host_makefile_frag="config/mh-lynxrs6k"
- ;;
*-*-darwin*)
host_makefile_frag="config/mh-darwin"
;;
rs6000-*-aix*)
host_makefile_frag="config/mh-ppc-aix"
;;
- *-*-lynxos*)
- # /bin/cc is less than useful for our purposes. Always use GCC
- tentative_cc="/bin/gcc"
- ;;
- *-*-sysv4*)
- host_makefile_frag="config/mh-sysv4"
- ;;
- # This is placed last to prevent interfering with the cases above.
- i[3456789]86-*-*)
- # Build the stage2 and stage3 compilers with -fomit-frame-pointer.
- host_makefile_frag="config/mh-x86omitfp"
- ;;
esac
fi
-# If we aren't going to be using gcc, see if we can extract a definition
-# of CC from the fragment.
-# Actually, use the 'pre-extracted' version above.
-if test -z "${CC}" && test "${build}" = "${host}" ; then
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- found=
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/gcc; then
- found=yes
- break
- fi
- done
- IFS="$save_ifs"
- if test -z "${found}" && test -n "${tentative_cc}" ; then
- CC=$tentative_cc
- fi
-fi
-
if test "${build}" != "${host}" ; then
AR_FOR_BUILD=${AR_FOR_BUILD-ar}
AS_FOR_BUILD=${AS_FOR_BUILD-as}
fi
else
poststage1_ldflags=
- # With --enable-build-with-cxx, default to linking libstdc++ and
- # libgcc statically. But if the user explicitly specified the
- # libraries to use, trust that they are doing what they want.
- if test "$ENABLE_BUILD_WITH_CXX" = "yes" -a "$poststage1_libs" = ""; then
+ # In stages 2 and 3, default to linking libstdc++ and libgcc
+ # statically. But if the user explicitly specified the libraries to
+ # use, trust that they are doing what they want.
+ if test "$poststage1_libs" = ""; then
poststage1_ldflags="-static-libstdc++ -static-libgcc"
fi
fi
# Check for PPL
-ppllibs=" -lppl_c -lppl -lgmpxx"
+ppllibs=
pplinc=
+pwllib=
# Check whether --with-ppl was given.
fi
+# Check whether --enable-ppl-version-check was given.
+if test "${enable_ppl_version_check+set}" = set; then :
+ enableval=$enable_ppl_version_check;
+fi
+
+
case $with_ppl in
- no)
- ppllibs=
- ;;
- "" | yes)
+ yes | no | "")
;;
*)
- ppllibs="-L$with_ppl/lib -lppl_c -lppl -lgmpxx"
+ ppllibs="-L$with_ppl/lib"
pplinc="-I$with_ppl/include $pplinc"
+ if test -d "$with_ppl/lib" && test -d "$with_ppl/include"; then
+ with_ppl=yes
+ else
+ as_fn_error "cannot find directories \"$with_ppl/lib\" or \"$with_ppl/include\"" "$LINENO" 5
+ fi
;;
esac
-if test "x$with_ppl_include" != x; then
+
+if test x"$with_ppl_include" != x; then
pplinc="-I$with_ppl_include $pplinc"
+ with_ppl=yes
fi
+
if test "x$with_ppl_lib" != x; then
- ppllibs="-L$with_ppl_lib -lppl_c -lppl -lgmpxx"
+ ppllibs="-L$with_ppl_lib"
+ with_ppl=yes
fi
-if test "x$with_ppl$with_ppl_include$with_ppl_lib" = x && test -d ${srcdir}/ppl; then
- ppllibs='-L$$r/$(HOST_SUBDIR)/ppl/interfaces/C/'"$lt_cv_objdir"' -L$$r/$(HOST_SUBDIR)/ppl/src/'"$lt_cv_objdir"' -lppl_c -lppl -lgmpxx '
+
+if test x"$with_ppl$with_ppl_include$with_ppl_lib" = x && test -d ${srcdir}/ppl; then
+ if test x"$enable_watchdog" = xyes; then
+ pwllib="-lpwl"
+ fi
+ ppllibs='-L$$r/$(HOST_SUBDIR)/ppl/interfaces/C/'"$lt_cv_objdir"' -L$$r/$(HOST_SUBDIR)/ppl/src/'"$lt_cv_objdir"
pplinc='-I$$r/$(HOST_SUBDIR)/ppl/src -I$$r/$(HOST_SUBDIR)/ppl/interfaces/C '
enable_ppl_version_check=no
+ with_ppl=yes
fi
-# Check whether --enable-ppl-version-check was given.
-if test "${enable_ppl_version_check+set}" = set; then :
- enableval=$enable_ppl_version_check; ENABLE_PPL_CHECK=$enableval
+if test "x$with_ppl" != xno; then
+ if test "x$pwllib" = x; then
+ saved_LIBS="$LIBS"
+ LIBS="$LIBS $ppllibs -lstdc++ -lm"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for PWL_handle_timeout in -lpwl" >&5
+$as_echo_n "checking for PWL_handle_timeout in -lpwl... " >&6; }
+if test "${ac_cv_lib_pwl_PWL_handle_timeout+set}" = set; then :
+ $as_echo_n "(cached) " >&6
else
- ENABLE_PPL_CHECK=yes
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lpwl $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char PWL_handle_timeout ();
+int
+main ()
+{
+return PWL_handle_timeout ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_pwl_PWL_handle_timeout=yes
+else
+ ac_cv_lib_pwl_PWL_handle_timeout=no
fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pwl_PWL_handle_timeout" >&5
+$as_echo "$ac_cv_lib_pwl_PWL_handle_timeout" >&6; }
+if test "x$ac_cv_lib_pwl_PWL_handle_timeout" = x""yes; then :
+ pwllib="-lpwl"
+fi
+
+ LIBS="$saved_LIBS"
+ fi
+ ppllibs="$ppllibs -lppl_c -lppl $pwllib -lgmpxx"
-if test "x$with_ppl" != "xno" -a "${ENABLE_PPL_CHECK}" = "yes"; then
- saved_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS $pplinc $gmpinc"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for version 0.10 (or later revision) of PPL" >&5
-$as_echo_n "checking for version 0.10 (or later revision) of PPL... " >&6; }
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ if test "$enable_ppl_version_check" != no; then
+ saved_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $pplinc $gmpinc"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for version 0.11 (revision 0 or later) of PPL" >&5
+$as_echo_n "checking for version 0.11 (revision 0 or later) of PPL... " >&6; }
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include "ppl_c.h"
int
main ()
{
- #if PPL_VERSION_MAJOR != 0 || PPL_VERSION_MINOR < 10
- choke me
- #endif
+ #if PPL_VERSION_MAJOR != 0 || PPL_VERSION_MINOR < 11
+ choke me
+ #endif
;
return 0;
$as_echo "no" >&6; }; ppllibs= ; pplinc= ; with_ppl=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- CFLAGS="$saved_CFLAGS"
+ CFLAGS="$saved_CFLAGS"
+ fi
fi
# Flags needed for PPL
if test "x$with_ppl" = "xno"; then
+
+
+
+ if test "x${with_cloog}" = xno; then
+ graphite_requested=no
+ elif test "x${with_cloog}" != x \
+ || test "x${with_cloog_include}" != x \
+ || test "x${with_cloog_lib}" != x ; then
+ graphite_requested=yes
+ else
+ graphite_requested=no
+ fi
+
+
+ if test "${graphite_requested}" = yes; then
+ as_fn_error "Unable to find a usable PPL. See config.log for details." "$LINENO" 5
+ fi
with_cloog=no
fi
if test "x${with_cloog}" = x && test "x${with_cloog_include}" = x \
;;
"ISL")
clooginc="${clooginc} ${_cloogorginc}"
- clooglibs="${clooglibs} -lcloog-isl"
+ clooglibs="${clooglibs} -lcloog-isl -lisl"
cloog_org=yes
;;
"PPL")
LDFLAGS="${_cloog_saved_LDFLAGS} ${clooglibs} ${ppllibs}"
if test "${cloog_org}" = yes ; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for version 0.14.0 of CLooG" >&5
-$as_echo_n "checking for version 0.14.0 of CLooG... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for version 0.16.1 of CLooG" >&5
+$as_echo_n "checking for version 0.16.1 of CLooG... " >&6; }
if test "${gcc_cv_cloog_ct_0_14_0+set}" = set; then :
$as_echo_n "(cached) " >&6
else
main ()
{
#if CLOOG_VERSION_MAJOR != 0 \
- || CLOOG_VERSION_MINOR != 14 \
- || CLOOG_VERSION_REVISION < 0
+ || CLOOG_VERSION_MINOR != 16 \
+ || CLOOG_VERSION_REVISION < 1
choke me
#endif
;
- if test "x${with_cloog}" != x \
+ if test "x${with_cloog}" = xno; then
+ graphite_requested=no
+ elif test "x${with_cloog}" != x \
|| test "x${with_cloog_include}" != x \
|| test "x${with_cloog_lib}" != x ; then
graphite_requested=yes
&& test "x${clooglibs}" = x \
&& test "x${clooginc}" = x ; then
- as_fn_error "Unable to find a usable CLooG. See config.log for details." "$LINENO" 5
+ as_fn_error "Unable to find a usable CLooG. See config.log for details." "$LINENO" 5
fi
else
if test x"$default_enable_lto" = x"yes" ; then
case $target in
- *-apple-darwin* | *-cygwin* | *-mingw*) ;;
+ *-apple-darwin9 | *-cygwin* | *-mingw*) ;;
# On other non-ELF platforms, LTO has yet to be validated.
*) enable_lto=no ;;
esac
extra_ranlibflags_for_target=
target_makefile_frag=/dev/null
case "${target}" in
- mep*-*-*)
- target_makefile_frag="config/mt-mep"
- ;;
spu-*-*)
target_makefile_frag="config/mt-spu"
;;
mips*-*-*linux* | mips*-*-gnu*)
target_makefile_frag="config/mt-mips-gnu"
;;
- *-*-netware*)
- target_makefile_frag="config/mt-netware"
- ;;
*-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
target_makefile_frag="config/mt-gnu"
;;
# ranlib before Darwin10 requires the -c flag to look at common symbols.
extra_ranlibflags_for_target=" -c"
;;
- mips*-*-pe | sh*-*-pe | *arm-wince-pe)
- target_makefile_frag="config/mt-wince"
- ;;
esac
alphaieee_frag=/dev/null
# Decide which environment variable is used to find dynamic libraries.
case "${host}" in
*-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
- *-*-darwin* | *-*-rhapsody* ) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
+ *-*-darwin*) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
*-*-mingw* | *-*-cygwin ) RPATH_ENVVAR=PATH ;;
*) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
esac
# Also strip program-prefix, program-suffix, and program-transform-name,
# so that we can pass down a consistent program-transform-name.
baseargs=
+tbaseargs=
keep_next=no
skip_next=no
eval "set -- $ac_configure_args"
ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
baseargs="$baseargs '$ac_arg'"
+ tbaseargs="$tbaseargs '$ac_arg'"
keep_next=no
continue
fi
;;
esac
+ skip_targ=no
+ case $ac_arg in
+
+ --with-* | --without-*)
+ libopt=`echo "$ac_arg" | sed -e 's,^--[^-_]*[-_],,' -e 's,=.*$,,'`
+
+ case $libopt in
+ *[-_]include)
+ lib=`echo "$libopt" | sed 's,[-_]include$,,'`
+ ;;
+ *[-_]lib)
+ lib=`echo "$libopt" | sed 's,[-_]lib$,,'`
+ ;;
+ *)
+ lib=$libopt
+ ;;
+ esac
+
+
+ case $lib in
+ mpc | mpfr | gmp | ppl | cloog)
+ # If we're processing --with-$lib, --with-$lib-include or
+ # --with-$lib-lib, for one of the libs above, and target is
+ # different from host, don't pass the current argument to any
+ # target library's configure.
+ if test x$is_cross_compiler = xyes; then
+ skip_targ=yes
+ fi
+ ;;
+ esac
+ ;;
+ esac
+
case "$ac_arg" in
--cache-file=/dev/null | \
-cache-file=/dev/null )
# Handled here to avoid the test to skip args below.
baseargs="$baseargs '$ac_arg'"
+ tbaseargs="$tbaseargs '$ac_arg'"
# Assert: $separate_arg should always be no.
keep_next=$separate_arg
;;
ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
baseargs="$baseargs '$ac_arg'"
+ if test X"$skip_targ" = Xno; then
+ tbaseargs="$tbaseargs '$ac_arg'"
+ fi
keep_next=$separate_arg
;;
*)
gcc_transform_name=`cat conftestsed.out`
rm -f conftestsed.out
baseargs="$baseargs --program-transform-name='${gcc_transform_name}'"
+tbaseargs="$tbaseargs --program-transform-name='${gcc_transform_name}'"
if test "$silent" = yes; then
baseargs="$baseargs --silent"
+ tbaseargs="$tbaseargs --silent"
fi
baseargs="$baseargs --disable-option-checking"
+tbaseargs="$tbaseargs --disable-option-checking"
# Record and document user additions to sub configure arguments.
# This seems to be due to autoconf 2.5x stupidity.
host_configargs="$host_configargs --cache-file=./config.cache ${extra_host_args} ${baseargs}"
-target_configargs="$target_configargs ${baseargs}"
+target_configargs="$target_configargs ${tbaseargs}"
# Passing a --with-cross-host argument lets the target libraries know
# whether they are being built with a cross-compiler or being built
esac
if test $ok = yes; then
# An in-tree tool is available and we can use it
- CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
+ CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `if test -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags; then $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes; else echo -funconfigured-libstdc++-v3 ; fi` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: just compiled" >&5
$as_echo "just compiled" >&6; }
elif expr "x$CXX_FOR_TARGET" : "x/" > /dev/null; then
OSDN Git Service
