#! /bin/sh
-
# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
+# Generated by GNU Autoconf 2.59.
#
+# Copyright (C) 2003 Free Software Foundation, Inc.
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
+## --------------------- ##
+## M4sh Initialization. ##
+## --------------------- ##
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+ set -o posix
+fi
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ as_unset=unset
+else
+ as_unset=false
+fi
+
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ $as_unset $as_var
+ fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)$' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+ /^X\/\(\/\/\)$/{ s//\1/; q; }
+ /^X\/\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+
+
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" || {
+ # Find who we are. Look in the path if we contain no path at all
+ # relative or not.
+ case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
-# Defaults:
-ac_help=
+ ;;
+ esac
+ # We did not find ourselves, most probably we were run as `sh COMMAND'
+ # in which case we are not to be found in the path.
+ if test "x$as_myself" = x; then
+ as_myself=$0
+ fi
+ if test ! -f "$as_myself"; then
+ { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
+ { (exit 1); exit 1; }; }
+ fi
+ case $CONFIG_SHELL in
+ '')
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for as_base in sh bash ksh sh5; do
+ case $as_dir in
+ /*)
+ if ("$as_dir/$as_base" -c '
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+ CONFIG_SHELL=$as_dir/$as_base
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+ fi;;
+ esac
+ done
+done
+;;
+ esac
+
+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+ # uniformly replaced by the line number. The first 'sed' inserts a
+ # line-number line before each line; the second 'sed' does the real
+ # work. The second script uses 'N' to pair each line-number line
+ # with the numbered line, and appends trailing '-' during
+ # substitution so that $LINENO is not a special case at line end.
+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
+ sed '=' <$as_myself |
+ sed '
+ N
+ s,$,-,
+ : loop
+ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+ t loop
+ s,-$,,
+ s,^['$as_cr_digits']*\n,,
+ ' >$as_me.lineno &&
+ chmod +x $as_me.lineno ||
+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+ { (exit 1); exit 1; }; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensible to this).
+ . ./$as_me.lineno
+ # Exit status is that of the last command.
+ exit
+}
+
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+ *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T=' ' ;;
+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+ # We could just check for DJGPP; but this test a) works b) is more generic
+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+ if test -f conf$$.exe; then
+ # Don't use ln at all; we don't have any links
+ as_ln_s='cp -p'
+ else
+ as_ln_s='ln -s'
+ fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p=:
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+as_executable_p="test -f"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" $as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
+
+# Name of the host.
+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+exec 6>&1
+
+#
+# Initializations.
+#
ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
- --enable-libada Builds libada directory"
-ac_help="$ac_help
- --enable-serial-[{host,target,build}-]configure
- Force sequential configuration of
- sub-packages for the host, target or build
- machine, or all sub-packages"
-ac_help="$ac_help
- --enable-maintainer-mode enable make rules and dependencies not useful
- (and sometimes confusing) to the casual installer"
-ac_help="$ac_help
- --enable-werror enable -Werror in bootstrap stage2 and later"
+ac_config_libobj_dir=.
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+# Maximum number of lines to put in a shell here document.
+# This variable seems obsolete. It should probably be removed, and
+# only ac_max_sed_lines should be used.
+: ${ac_max_here_lines=38}
+
+# Identity of this package.
+PACKAGE_NAME=
+PACKAGE_TARNAME=
+PACKAGE_VERSION=
+PACKAGE_STRING=
+PACKAGE_BUGREPORT=
+
+ac_unique_file="move-if-change"
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA LN LN_S TOPLEVEL_CONFIGURE_ARGUMENTS build_subdir host_subdir target_subdir CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT GNATBIND ac_ct_GNATBIND do_compare gmplibs gmpinc stage1_languages SYSROOT_CFLAGS_FOR_TARGET CONFIGURED_BISON CONFIGURED_YACC CONFIGURED_M4 CONFIGURED_FLEX CONFIGURED_LEX CONFIGURED_MAKEINFO bootstrap_lean default_target RPATH_ENVVAR BUILD_PREFIX BUILD_PREFIX_1 tooldir build_tooldir GDB_TK build_configargs build_configdirs host_configargs configdirs target_configargs target_configdirs CC_FOR_BUILD config_shell AR AS DLLTOOL LD NM RANLIB WINDRES OBJCOPY OBJDUMP CXX CFLAGS_FOR_BUILD CXXFLAGS AR_FOR_TARGET AS_FOR_TARGET CC_FOR_TARGET CXX_FOR_TARGET DLLTOOL_FOR_TARGET GCC_FOR_TARGET GCJ_FOR_TARGET GFORTRAN_FOR_TARGET LD_FOR_TARGET LIPO_FOR_TARGET NM_FOR_TARGET RANLIB_FOR_TARGET STRIP_FOR_TARGET WINDRES_FOR_TARGET CONFIGURED_AR_FOR_TARGET CONFIGURED_AS_FOR_TARGET CONFIGURED_CC_FOR_TARGET CONFIGURED_CXX_FOR_TARGET CONFIGURED_DLLTOOL_FOR_TARGET CONFIGURED_GCC_FOR_TARGET CONFIGURED_GCJ_FOR_TARGET CONFIGURED_GFORTRAN_FOR_TARGET CONFIGURED_LD_FOR_TARGET CONFIGURED_LIPO_FOR_TARGET CONFIGURED_NM_FOR_TARGET CONFIGURED_RANLIB_FOR_TARGET CONFIGURED_STRIP_FOR_TARGET CONFIGURED_WINDRES_FOR_TARGET FLAGS_FOR_TARGET RAW_CXX_FOR_TARGET MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT stage1_cflags CREATE_LINK_TO_DIR UNDO_LINK_TO_DIR stage2_werror_flag LIBOBJS LTLIBOBJS'
+ac_subst_files='serialization_dependencies host_makefile_frag target_makefile_frag alphaieee_frag ospace_frag'
# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
# The variables have the same names as the options, with
# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
+cache_file=/dev/null
exec_prefix=NONE
-host=NONE
no_create=
-nonopt=NONE
no_recursion=
prefix=NONE
program_prefix=NONE
silent=
site=
srcdir=
-target=NONE
verbose=
x_includes=NONE
x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
infodir='${prefix}/info'
mandir='${prefix}/man'
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
ac_prev=
for ac_option
do
-
# If the previous option needs an argument, assign it.
if test -n "$ac_prev"; then
eval "$ac_prev=\$ac_option"
continue
fi
- case "$ac_option" in
- -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
- *) ac_optarg= ;;
- esac
+ ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
# Accept the important Cygnus configure options, so we can diagnose typos.
- case "$ac_option" in
+ case $ac_option in
-bindir | --bindir | --bindi | --bind | --bin | --bi)
ac_prev=bindir ;;
-bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
- bindir="$ac_optarg" ;;
+ bindir=$ac_optarg ;;
-build | --build | --buil | --bui | --bu)
- ac_prev=build ;;
+ ac_prev=build_alias ;;
-build=* | --build=* | --buil=* | --bui=* | --bu=*)
- build="$ac_optarg" ;;
+ build_alias=$ac_optarg ;;
-cache-file | --cache-file | --cache-fil | --cache-fi \
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
ac_prev=cache_file ;;
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
- cache_file="$ac_optarg" ;;
+ cache_file=$ac_optarg ;;
+
+ --config-cache | -C)
+ cache_file=config.cache ;;
-datadir | --datadir | --datadi | --datad | --data | --dat | --da)
ac_prev=datadir ;;
-datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
| --da=*)
- datadir="$ac_optarg" ;;
+ datadir=$ac_optarg ;;
-disable-* | --disable-*)
- ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
# Reject names that are not valid shell variable names.
- if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
- fi
- ac_feature=`echo $ac_feature| sed 's/-/_/g'`
- eval "enable_${ac_feature}=no" ;;
+ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ { (exit 1); exit 1; }; }
+ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+ eval "enable_$ac_feature=no" ;;
-enable-* | --enable-*)
- ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
# Reject names that are not valid shell variable names.
- if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
- fi
- ac_feature=`echo $ac_feature| sed 's/-/_/g'`
- case "$ac_option" in
- *=*) ;;
+ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ { (exit 1); exit 1; }; }
+ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+ case $ac_option in
+ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
*) ac_optarg=yes ;;
esac
- eval "enable_${ac_feature}='$ac_optarg'" ;;
+ eval "enable_$ac_feature='$ac_optarg'" ;;
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
| --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
| --exec=* | --exe=* | --ex=*)
- exec_prefix="$ac_optarg" ;;
+ exec_prefix=$ac_optarg ;;
-gas | --gas | --ga | --g)
# Obsolete; use --with-gas.
with_gas=yes ;;
- -help | --help | --hel | --he)
- # Omit some internal or obsolete options to make the list less imposing.
- # This message is too long to be a string in the A/UX 3.1 sh.
- cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
- --cache-file=FILE cache test results in FILE
- --help print this message
- --no-create do not create output files
- --quiet, --silent do not print \`checking...' messages
- --version print the version of autoconf that created configure
-Directory and file names:
- --prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
- [same as prefix]
- --bindir=DIR user executables in DIR [EPREFIX/bin]
- --sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
- --libexecdir=DIR program executables in DIR [EPREFIX/libexec]
- --datadir=DIR read-only architecture-independent data in DIR
- [PREFIX/share]
- --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data in DIR
- [PREFIX/com]
- --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
- --libdir=DIR object code libraries in DIR [EPREFIX/lib]
- --includedir=DIR C header files in DIR [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
- --infodir=DIR info documentation in DIR [PREFIX/info]
- --mandir=DIR man documentation in DIR [PREFIX/man]
- --srcdir=DIR find the sources in DIR [configure dir or ..]
- --program-prefix=PREFIX prepend PREFIX to installed program names
- --program-suffix=SUFFIX append SUFFIX to installed program names
- --program-transform-name=PROGRAM
- run sed PROGRAM on installed program names
-EOF
- cat << EOF
-Host type:
- --build=BUILD configure for building on BUILD [BUILD=HOST]
- --host=HOST configure for HOST [guessed]
- --target=TARGET configure for TARGET [TARGET=HOST]
-Features and packages:
- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
- --x-includes=DIR X include files are in DIR
- --x-libraries=DIR X library files are in DIR
-EOF
- if test -n "$ac_help"; then
- echo "--enable and --with options recognized:$ac_help"
- fi
- exit 0 ;;
+ -help | --help | --hel | --he | -h)
+ ac_init_help=long ;;
+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+ ac_init_help=recursive ;;
+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+ ac_init_help=short ;;
-host | --host | --hos | --ho)
- ac_prev=host ;;
+ ac_prev=host_alias ;;
-host=* | --host=* | --hos=* | --ho=*)
- host="$ac_optarg" ;;
+ host_alias=$ac_optarg ;;
-includedir | --includedir | --includedi | --included | --include \
| --includ | --inclu | --incl | --inc)
ac_prev=includedir ;;
-includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
| --includ=* | --inclu=* | --incl=* | --inc=*)
- includedir="$ac_optarg" ;;
+ includedir=$ac_optarg ;;
-infodir | --infodir | --infodi | --infod | --info | --inf)
ac_prev=infodir ;;
-infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
- infodir="$ac_optarg" ;;
+ infodir=$ac_optarg ;;
-libdir | --libdir | --libdi | --libd)
ac_prev=libdir ;;
-libdir=* | --libdir=* | --libdi=* | --libd=*)
- libdir="$ac_optarg" ;;
+ libdir=$ac_optarg ;;
-libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
| --libexe | --libex | --libe)
ac_prev=libexecdir ;;
-libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
| --libexe=* | --libex=* | --libe=*)
- libexecdir="$ac_optarg" ;;
+ libexecdir=$ac_optarg ;;
-localstatedir | --localstatedir | --localstatedi | --localstated \
| --localstate | --localstat | --localsta | --localst \
-localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
| --localstate=* | --localstat=* | --localsta=* | --localst=* \
| --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
- localstatedir="$ac_optarg" ;;
+ localstatedir=$ac_optarg ;;
-mandir | --mandir | --mandi | --mand | --man | --ma | --m)
ac_prev=mandir ;;
-mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
- mandir="$ac_optarg" ;;
+ mandir=$ac_optarg ;;
-nfp | --nfp | --nf)
# Obsolete; use --without-fp.
with_fp=no ;;
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c)
+ | --no-cr | --no-c | -n)
no_create=yes ;;
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
-oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
| --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
| --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
- oldincludedir="$ac_optarg" ;;
+ oldincludedir=$ac_optarg ;;
-prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
ac_prev=prefix ;;
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
- prefix="$ac_optarg" ;;
+ prefix=$ac_optarg ;;
-program-prefix | --program-prefix | --program-prefi | --program-pref \
| --program-pre | --program-pr | --program-p)
ac_prev=program_prefix ;;
-program-prefix=* | --program-prefix=* | --program-prefi=* \
| --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
- program_prefix="$ac_optarg" ;;
+ program_prefix=$ac_optarg ;;
-program-suffix | --program-suffix | --program-suffi | --program-suff \
| --program-suf | --program-su | --program-s)
ac_prev=program_suffix ;;
-program-suffix=* | --program-suffix=* | --program-suffi=* \
| --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
- program_suffix="$ac_optarg" ;;
+ program_suffix=$ac_optarg ;;
-program-transform-name | --program-transform-name \
| --program-transform-nam | --program-transform-na \
| --program-transfo=* | --program-transf=* \
| --program-trans=* | --program-tran=* \
| --progr-tra=* | --program-tr=* | --program-t=*)
- program_transform_name="$ac_optarg" ;;
+ program_transform_name=$ac_optarg ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
ac_prev=sbindir ;;
-sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
| --sbi=* | --sb=*)
- sbindir="$ac_optarg" ;;
+ sbindir=$ac_optarg ;;
-sharedstatedir | --sharedstatedir | --sharedstatedi \
| --sharedstated | --sharedstate | --sharedstat | --sharedsta \
| --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
| --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
| --sha=* | --sh=*)
- sharedstatedir="$ac_optarg" ;;
+ sharedstatedir=$ac_optarg ;;
-site | --site | --sit)
ac_prev=site ;;
-site=* | --site=* | --sit=*)
- site="$ac_optarg" ;;
+ site=$ac_optarg ;;
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
- srcdir="$ac_optarg" ;;
+ srcdir=$ac_optarg ;;
-sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
| --syscon | --sysco | --sysc | --sys | --sy)
ac_prev=sysconfdir ;;
-sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
| --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
- sysconfdir="$ac_optarg" ;;
+ sysconfdir=$ac_optarg ;;
-target | --target | --targe | --targ | --tar | --ta | --t)
- ac_prev=target ;;
+ ac_prev=target_alias ;;
-target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
- target="$ac_optarg" ;;
+ target_alias=$ac_optarg ;;
-v | -verbose | --verbose | --verbos | --verbo | --verb)
verbose=yes ;;
- -version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 2.13"
- exit 0 ;;
+ -version | --version | --versio | --versi | --vers | -V)
+ ac_init_version=: ;;
-with-* | --with-*)
- ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
# Reject names that are not valid shell variable names.
- if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
- fi
+ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid package name: $ac_package" >&2
+ { (exit 1); exit 1; }; }
ac_package=`echo $ac_package| sed 's/-/_/g'`
- case "$ac_option" in
- *=*) ;;
+ case $ac_option in
+ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
*) ac_optarg=yes ;;
esac
- eval "with_${ac_package}='$ac_optarg'" ;;
+ eval "with_$ac_package='$ac_optarg'" ;;
-without-* | --without-*)
- ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
# Reject names that are not valid shell variable names.
- if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
- fi
- ac_package=`echo $ac_package| sed 's/-/_/g'`
- eval "with_${ac_package}=no" ;;
+ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid package name: $ac_package" >&2
+ { (exit 1); exit 1; }; }
+ ac_package=`echo $ac_package | sed 's/-/_/g'`
+ eval "with_$ac_package=no" ;;
--x)
# Obsolete; use --with-x.
ac_prev=x_includes ;;
-x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
| --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
- x_includes="$ac_optarg" ;;
+ x_includes=$ac_optarg ;;
-x-libraries | --x-libraries | --x-librarie | --x-librari \
| --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
ac_prev=x_libraries ;;
-x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
- x_libraries="$ac_optarg" ;;
+ x_libraries=$ac_optarg ;;
- -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+ -*) { echo "$as_me: error: unrecognized option: $ac_option
+Try \`$0 --help' for more information." >&2
+ { (exit 1); exit 1; }; }
;;
+ *=*)
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+ { (exit 1); exit 1; }; }
+ ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
+ eval "$ac_envvar='$ac_optarg'"
+ export $ac_envvar ;;
+
*)
- if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
- echo "configure: warning: $ac_option: invalid host type" 1>&2
- fi
- if test "x$nonopt" != xNONE; then
- { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
- fi
- nonopt="$ac_option"
+ # FIXME: should be removed in autoconf 3.0.
+ echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
;;
esac
done
if test -n "$ac_prev"; then
- { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
- exec 6>/dev/null
-else
- exec 6>&1
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+ { echo "$as_me: error: missing argument to $ac_option" >&2
+ { (exit 1); exit 1; }; }
fi
-exec 5>./config.log
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
+# Be sure to have absolute paths.
+for ac_var in exec_prefix prefix
+do
+ eval ac_val=$`echo $ac_var`
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
+ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+ { (exit 1); exit 1; }; };;
+ esac
+done
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
+# Be sure to have absolute paths.
+for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
+ localstatedir libdir includedir oldincludedir infodir mandir
do
- case "$ac_arg" in
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c) ;;
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
- ac_configure_args="$ac_configure_args '$ac_arg'" ;;
- *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+ eval ac_val=$`echo $ac_var`
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) ;;
+ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+ { (exit 1); exit 1; }; };;
esac
done
-# NLS nuisances.
-# Only set these to C if already set. These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}" = set; then LANG=C; export LANG; fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+ If a cross compiler is detected then cross compile mode will be used." >&2
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+ fi
+fi
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=move-if-change
# Find the source files, if location was not specified.
if test -z "$srcdir"; then
ac_srcdir_defaulted=yes
# Try the directory containing this script, then its parent.
- ac_prog=$0
- ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
- test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+ ac_confdir=`(dirname "$0") 2>/dev/null ||
+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$0" : 'X\(//\)[^/]' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$0" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
srcdir=$ac_confdir
if test ! -r $srcdir/$ac_unique_file; then
srcdir=..
fi
if test ! -r $srcdir/$ac_unique_file; then
if test "$ac_srcdir_defaulted" = yes; then
- { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
+ { (exit 1); exit 1; }; }
else
- { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+ { (exit 1); exit 1; }; }
fi
fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
+ { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
+ { (exit 1); exit 1; }; }
+srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
+ac_env_build_alias_set=${build_alias+set}
+ac_env_build_alias_value=$build_alias
+ac_cv_env_build_alias_set=${build_alias+set}
+ac_cv_env_build_alias_value=$build_alias
+ac_env_host_alias_set=${host_alias+set}
+ac_env_host_alias_value=$host_alias
+ac_cv_env_host_alias_set=${host_alias+set}
+ac_cv_env_host_alias_value=$host_alias
+ac_env_target_alias_set=${target_alias+set}
+ac_env_target_alias_value=$target_alias
+ac_cv_env_target_alias_set=${target_alias+set}
+ac_cv_env_target_alias_value=$target_alias
+ac_env_CC_set=${CC+set}
+ac_env_CC_value=$CC
+ac_cv_env_CC_set=${CC+set}
+ac_cv_env_CC_value=$CC
+ac_env_CFLAGS_set=${CFLAGS+set}
+ac_env_CFLAGS_value=$CFLAGS
+ac_cv_env_CFLAGS_set=${CFLAGS+set}
+ac_cv_env_CFLAGS_value=$CFLAGS
+ac_env_LDFLAGS_set=${LDFLAGS+set}
+ac_env_LDFLAGS_value=$LDFLAGS
+ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
+ac_cv_env_LDFLAGS_value=$LDFLAGS
+ac_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_env_CPPFLAGS_value=$CPPFLAGS
+ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_cv_env_CPPFLAGS_value=$CPPFLAGS
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat <<_ACEOF
+\`configure' configures this package to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE. See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+ -h, --help display this help and exit
+ --help=short display options specific to this package
+ --help=recursive display the short help of all the included packages
+ -V, --version display version information and exit
+ -q, --quiet, --silent do not print \`checking...' messages
+ --cache-file=FILE cache test results in FILE [disabled]
+ -C, --config-cache alias for \`--cache-file=config.cache'
+ -n, --no-create do not create output files
+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
+
+_ACEOF
+
+ cat <<_ACEOF
+Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --datadir=DIR read-only architecture-independent data [PREFIX/share]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --infodir=DIR info documentation [PREFIX/info]
+ --mandir=DIR man documentation [PREFIX/man]
+_ACEOF
+
+ cat <<\_ACEOF
+
+Program names:
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
+
+System types:
+ --build=BUILD configure for building on BUILD [guessed]
+ --host=HOST cross-compile to build programs to run on HOST [BUILD]
+ --target=TARGET configure for building compilers for TARGET [HOST]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+
+ cat <<\_ACEOF
+
+Optional Features:
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --enable-libada Builds libada directory
+ --enable-libssp Builds libssp directory
+ --enable-bootstrap=lean Enable bootstrapping no
+ --enable-serial-{host,target,build}-configure
+ Force sequential configuration of
+ sub-packages for the host, target or build
+ machine, or all sub-packages
+ --enable-maintainer-mode enable make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer
+ --enable-werror enable -Werror in bootstrap stage2 and later
+
+Optional Packages:
+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --with-mpfr-dir=PATH Specify source directory for MPFR library
+ --with-mpfr=PATH Specify directory for installed MPFR library
+ --with-gmp-dir=PATH Specify source directory for GMP library
+ --with-gmp=PATH Specify directory for installed GMP library
+ --with-build-sysroot=sysroot
+ use sysroot as the system root during the build
+
+Some influential environment variables:
+ CC C compiler command
+ CFLAGS C compiler flags
+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
+ nonstandard directory <lib dir>
+ CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
+ headers in a nonstandard directory <include dir>
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+_ACEOF
+fi
+
+if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ ac_popdir=`pwd`
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+ test -d $ac_dir || continue
+ ac_builddir=.
+
+if test "$ac_dir" != .; then
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+ ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+ .) # No --srcdir option. We are building in place.
+ ac_srcdir=.
+ if test -z "$ac_top_builddir"; then
+ ac_top_srcdir=.
+ else
+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+ fi ;;
+ [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir ;;
+ *) # Relative path.
+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+ case "$ac_dir" in
+ .) ac_abs_builddir=`pwd`;;
+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+ *) ac_abs_builddir=`pwd`/"$ac_dir";;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+ case ${ac_top_builddir}. in
+ .) ac_abs_top_builddir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+ case $ac_srcdir in
+ .) ac_abs_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+ case $ac_top_srcdir in
+ .) ac_abs_top_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+ esac;;
+esac
+
+ cd $ac_dir
+ # Check for guested configure; otherwise get Cygnus style configure.
+ if test -f $ac_srcdir/configure.gnu; then
+ echo
+ $SHELL $ac_srcdir/configure.gnu --help=recursive
+ elif test -f $ac_srcdir/configure; then
+ echo
+ $SHELL $ac_srcdir/configure --help=recursive
+ elif test -f $ac_srcdir/configure.ac ||
+ test -f $ac_srcdir/configure.in; then
+ echo
+ $ac_configure --help
+ else
+ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi
+ cd $ac_popdir
+ done
+fi
+
+test -n "$ac_init_help" && exit 0
+if $ac_init_version; then
+ cat <<\_ACEOF
+
+Copyright (C) 2003 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+ exit 0
+fi
+exec 5>config.log
+cat >&5 <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by $as_me, which was
+generated by GNU Autoconf 2.59. Invocation command line was
+
+ $ $0 $@
+
+_ACEOF
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+
+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ echo "PATH: $as_dir"
+done
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_sep=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+ 2)
+ ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
+ # Get rid of the leading space.
+ ac_sep=" "
+ ;;
+ esac
+ done
+done
+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log. We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Be sure not to use single quotes in there, as some shells,
+# such as our DU 5.0 friend, will then `close' the trap.
+trap 'exit_status=$?
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
+
+ cat <<\_ASBOX
+## ---------------- ##
+## Cache variables. ##
+## ---------------- ##
+_ASBOX
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+{
+ (set) 2>&1 |
+ case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ sed -n \
+ "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
+ ;;
+ *)
+ sed -n \
+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ ;;
+ esac;
+}
+ echo
+
+ cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=$`echo $ac_var`
+ echo "$ac_var='"'"'$ac_val'"'"'"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ cat <<\_ASBOX
+## ------------- ##
+## Output files. ##
+## ------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=$`echo $ac_var`
+ echo "$ac_var='"'"'$ac_val'"'"'"
+ done | sort
+ echo
+ fi
+
+ if test -s confdefs.h; then
+ cat <<\_ASBOX
+## ----------- ##
+## confdefs.h. ##
+## ----------- ##
+_ASBOX
+ echo
+ sed "/^$/d" confdefs.h | sort
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ echo "$as_me: caught signal $ac_signal"
+ echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core &&
+ rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+ ' 0
+for ac_signal in 1 2 13 15; do
+ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo >confdefs.h
+
+# Predefined preprocessor variables.
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
# Prefer explicitly selected file to automatically selected ones.
if test -z "$CONFIG_SITE"; then
if test "x$prefix" != xNONE; then
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
- echo "loading site script $ac_site_file"
+ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
. "$ac_site_file"
fi
done
if test -r "$cache_file"; then
- echo "loading cache $cache_file"
- . $cache_file
+ # Some versions of bash will fail to source /dev/null (special
+ # files actually), so we avoid doing that.
+ if test -f "$cache_file"; then
+ { echo "$as_me:$LINENO: loading cache $cache_file" >&5
+echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . $cache_file;;
+ *) . ./$cache_file;;
+ esac
+ fi
else
- echo "creating cache $cache_file"
- > $cache_file
+ { echo "$as_me:$LINENO: creating cache $cache_file" >&5
+echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in `(set) 2>&1 |
+ sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val="\$ac_cv_env_${ac_var}_value"
+ eval ac_new_val="\$ac_env_${ac_var}_value"
+ case $ac_old_set,$ac_new_set in
+ set,)
+ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
+echo "$as_me: former value: $ac_old_val" >&2;}
+ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
+echo "$as_me: current value: $ac_new_val" >&2;}
+ ac_cache_corrupted=:
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+ ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+ { (exit 1); exit 1; }; }
fi
ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
- # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
- if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
- ac_n= ac_c='
-' ac_t=' '
- else
- ac_n=-n ac_c= ac_t=
- fi
-else
- ac_n= ac_c='\c' ac_t=
-fi
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install.sh -c"
break
+ elif test -f $ac_dir/shtool; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
fi
done
if test -z "$ac_aux_dir"; then
- { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
+ { (exit 1); exit 1; }; }
fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+# Make sure we can run config.sub.
+$ac_config_sub sun4 >/dev/null 2>&1 ||
+ { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
+echo "$as_me: error: cannot run $ac_config_sub" >&2;}
+ { (exit 1); exit 1; }; }
+
+echo "$as_me:$LINENO: checking build system type" >&5
+echo $ECHO_N "checking build system type... $ECHO_C" >&6
+if test "${ac_cv_build+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_build_alias=$build_alias
+test -z "$ac_cv_build_alias" &&
+ ac_cv_build_alias=`$ac_config_guess`
+test -z "$ac_cv_build_alias" &&
+ { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
+echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
+ { (exit 1); exit 1; }; }
+ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
+ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
+ { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+echo "${ECHO_T}$ac_cv_build" >&6
+build=$ac_cv_build
+build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
+echo "$as_me:$LINENO: checking host system type" >&5
+echo $ECHO_N "checking host system type... $ECHO_C" >&6
+if test "${ac_cv_host+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_host_alias=$host_alias
+test -z "$ac_cv_host_alias" &&
+ ac_cv_host_alias=$ac_cv_build_alias
+ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
+ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
+ { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+echo "${ECHO_T}$ac_cv_host" >&6
+host=$ac_cv_host
+host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
+echo "$as_me:$LINENO: checking target system type" >&5
+echo $ECHO_N "checking target system type... $ECHO_C" >&6
+if test "${ac_cv_target+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_target_alias=$target_alias
+test "x$ac_cv_target_alias" = "x" &&
+ ac_cv_target_alias=$ac_cv_host_alias
+ac_cv_target=`$ac_config_sub $ac_cv_target_alias` ||
+ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;}
+ { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_target" >&5
+echo "${ECHO_T}$ac_cv_target" >&6
+target=$ac_cv_target
+target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-# configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-# same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-# as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
# The aliases save the names the user supplied, while $host etc.
# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:585: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
- case $nonopt in
- NONE)
- if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
- else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
- fi ;;
- *) host_alias=$nonopt ;;
- esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:606: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
- case $nonopt in
- NONE) target_alias=$host_alias ;;
- *) target_alias=$nonopt ;;
- esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:624: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
- case $nonopt in
- NONE) build_alias=$host_alias ;;
- *) build_alias=$nonopt ;;
- esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
+test -n "$target_alias" &&
test "$program_prefix$program_suffix$program_transform_name" = \
NONENONEs,x,x, &&
program_prefix=${target_alias}-
-
-if test "$program_transform_name" = s,x,x,; then
- program_transform_name=
-else
- # Double any \ or $. echo might interpret backslashes.
- cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
- program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
- rm -f conftestsed
-fi
test "$program_prefix" != NONE &&
- program_transform_name="s,^,${program_prefix},; $program_transform_name"
+ program_transform_name="s,^,$program_prefix,;$program_transform_name"
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
- program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
+ program_transform_name="s,\$,$program_suffix,;$program_transform_name"
+# Double any \ or $. echo might interpret backslashes.
+# By default was `s,x,x', remove it if useless.
+cat <<\_ACEOF >conftest.sed
+s/[\\$]/&&/g;s/;s,x,x,$//
+_ACEOF
+program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
+rm conftest.sed
# Get 'install' or 'install-sh' and its variants.
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:679: checking for a BSD compatible install" >&5
+echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
- for ac_dir in $PATH; do
- # Account for people who put trailing slashes in PATH elements.
- case "$ac_dir/" in
- /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- # Don't use installbsd from OSF since it installs stuff as root
- # by default.
- for ac_prog in ginstall scoinst install; do
- if test -f $ac_dir/$ac_prog; then
+if test "${ac_cv_path_install+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in
+ ./ | .// | /cC/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
if test $ac_prog = install &&
- grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
:
+ elif test $ac_prog = install &&
+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # program-specific install script used by HP pwplus--don't use.
+ :
else
- ac_cv_path_install="$ac_dir/$ac_prog -c"
- break 2
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
fi
fi
done
- ;;
- esac
- done
- IFS="$ac_save_IFS"
+ done
+ ;;
+esac
+done
+
fi
if test "${ac_cv_path_install+set}" = set; then
- INSTALL="$ac_cv_path_install"
+ INSTALL=$ac_cv_path_install
else
# As a last resort, use the slow shell script. We don't cache a
# path for INSTALL within a source directory, because that will
# break other packages using the cache if that directory is
# removed, or if the path is relative.
- INSTALL="$ac_install_sh"
+ INSTALL=$ac_install_sh
fi
fi
-echo "$ac_t""$INSTALL" 1>&6
+echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6
# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+echo "$as_me:$LINENO: checking whether ln works" >&5
+echo $ECHO_N "checking whether ln works... $ECHO_C" >&6
+if test "${acx_cv_prog_LN+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ rm -f conftestdata_t
+echo >conftestdata_f
+if ln conftestdata_f conftestdata_t 2>/dev/null
+then
+ acx_cv_prog_LN=ln
+else
+ acx_cv_prog_LN=no
+fi
+rm -f conftestdata_f conftestdata_t
-# Autoconf M4 include file defining utility macros for complex Canadian
-# cross builds.
-
-
-
-
-
-
-####
-# _NCN_TOOL_PREFIXES: Some stuff that oughtta be done in AC_CANONICAL_SYSTEM
-# or AC_INIT.
-# These demand that AC_CANONICAL_SYSTEM be called beforehand.
-
-####
-# NCN_CHECK_TARGET_TOOL(variable, prog-to-check-for,[value-if-not-found],[path])
-# Like AC_CHECK_TOOL, but tries a prefix of the target, not the host.
-# Code is pretty much lifted from autoconf2.53.
-
-
-
-####
-# NCN_STRICT_CHECK_TOOL(variable, prog-to-check-for,[value-if-not-found],[path])
-# Like AC_CHECK_TOOL, but requires the prefix if build!=host.
-
-
-
-####
-# NCN_STRICT_CHECK_TARGET_TOOL(variable, prog-to-check-for,[value-if-not-found],[path])
-# Like NCN_CHECK_TARGET_TOOL, but requires the prefix if build!=target.
-
-
-###
-# AC_PROG_CPP_WERROR
-# Used for autoconf 2.5x to force AC_PREPROC_IFELSE to reject code which
-# triggers warnings from the preprocessor. Will be in autoconf 2.58.
-# For now, using this also overrides header checks to use only the
-# preprocessor (matches 2.13 behavior; matching 2.58's behavior is a
-# bit harder from here).
-# Eventually autoconf will default to checking headers with the compiler
-# instead, and we'll have to do this differently.
-
-# AC_PROG_CPP_WERROR
-
-# Test for GNAT.
-# We require the gnatbind program, and a compiler driver that
-# understands Ada. We use the user's CC setting, already found.
-#
-# Sets the shell variable have_gnat to yes or no as appropriate, and
-# substitutes GNATBIND.
+fi
+if test $acx_cv_prog_LN = no; then
+ LN="cp"
+ echo "$as_me:$LINENO: result: no, using $LN" >&5
+echo "${ECHO_T}no, using $LN" >&6
+else
+ LN="$acx_cv_prog_LN"
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+fi
+echo "$as_me:$LINENO: checking whether ln -s works" >&5
+echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+ echo "$as_me:$LINENO: result: no, using $LN_S" >&5
+echo "${ECHO_T}no, using $LN_S" >&6
+fi
### we might need to use some other shell than /bin/sh for running subshells
moveifchange=${srcdir}/move-if-change
+srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}`
+
+# We pass INSTALL explicitly to sub-makes. Make sure that it is not
+# a relative path.
+if test "$INSTALL" = "${srcdir}/install-sh -c"; then
+ INSTALL="${srcpwd}/install-sh -c"
+fi
+
# Set srcdir to "." if that's what it is.
# This is important for multilib support.
pwd=`${PWDCMD-pwd}`
-srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}`
if test "${pwd}" = "${srcpwd}" ; then
srcdir=.
fi
topsrcdir=$srcpwd
extra_host_args=
-# Define the trigger file to make sure configure will re-run whenever
-# the gcc version number changes.
-if test "${with_gcc_version_trigger+set}" = set ; then
- gcc_version_trigger="$with_gcc_version_trigger"
- gcc_version=`grep version_string ${with_gcc_version_trigger} | sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/'`
-else
- # If gcc's sources are available, define the trigger file.
- if test -f ${topsrcdir}/gcc/version.c ; then
- gcc_version_trigger=${topsrcdir}/gcc/version.c
- gcc_version=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/'`
- case "$ac_configure_args" in
- *--with-gcc-version-trigger=$gcc_version_trigger* )
- ;;
- * )
- # Add to all subconfigure arguments: build, host, and target.
- ac_configure_args="$ac_configure_args --with-gcc-version-trigger=$gcc_version_trigger"
- ;;
- esac
- fi
-fi
### To add a new directory to the tree, first choose whether it is a target
### or a host dependent tool. Then put it into the appropriate list
### (library or tools, host or target), doing a dependency sort.
-# Subdirs will be configured in the order listed in build_configdirs,
+# Subdirs will be configured in the order listed in build_configdirs,
# configdirs, or target_configdirs; see the serialization section below.
-# Dependency sorting is only needed when *configuration* must be done in
-# a particular order. In all cases a dependency should be specified in
+# Dependency sorting is only needed when *configuration* must be done in
+# a particular order. In all cases a dependency should be specified in
# the Makefile, whether or not it's implicitly specified here.
# Double entries in build_configdirs, configdirs, or target_configdirs may
# cause circular dependencies and break everything horribly.
+# these library is used by various programs built for the build
+# environment
+#
+build_libs="build-libiberty"
+
+# these tools are built for the build environment
+build_tools="build-texinfo build-byacc build-flex build-bison build-m4 build-fixincludes"
+
# these libraries are used by various programs built for the host environment
#
-host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl tix libgui zlib"
+host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp"
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
# know that we are building the simulator.
# binutils, gas and ld appear in that order because it makes sense to run
# "make check" in that particular order.
-host_tools="texinfo byacc flex bison binutils gas ld gcc sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar"
+host_tools="texinfo byacc flex bison binutils gas ld fixincludes gcc sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar gnattools"
# libgcj represents the runtime libraries only used by gcj.
libgcj="target-libffi \
target-libgloss \
target-newlib \
target-libstdc++-v3 \
- target-libf2c \
+ target-libmudflap \
+ target-libssp \
+ target-libgfortran \
${libgcj} \
target-libobjc \
target-libada"
## is important because configure will choke if they ever get through.
## ${configdirs} is directories we build using the host tools.
## ${target_configdirs} is directories we build using the target tools.
-#
configdirs=`echo ${host_libs} ${host_tools}`
target_configdirs=`echo ${target_libraries} ${target_tools}`
-
-# Only make build modules if build != host.
-# This should be done more generally, but at the moment it doesn't matter.
-if test ${host_alias} != ${build_alias} ; then
- # This is the only build module.
- build_modules=libiberty
-else
- build_modules=
-fi
-
+build_configdirs=`echo ${build_libs} ${build_tools}`
################################################################################
is_cross_compiler=no
else
is_cross_compiler=yes
-fi
+fi
# Find the build and target subdir names.
case ${build_alias} in
# Prefix 'build-' so this never conflicts with target_subdir.
build_subdir="build-${build_noncanonical}"
-# Not really a subdirectory, but here for completeness.
-host_subdir=.
+# --srcdir=. covers the toplevel, while "test -d" covers the subdirectories
+if ( test $srcdir = . && test -d gcc ) \
+ || test -d $srcdir/../host-${host_noncanonical}; then
+ host_subdir="host-${host_noncanonical}"
+else
+ host_subdir=.
+fi
# No prefix.
target_subdir=${target_noncanonical}
-
+
# Skipdirs are removed silently.
skipdirs=
noconfigdirs="$noconfigdirs gas"
fi
-# some tools are so dependent upon X11 that if we're not building with X,
+# some tools are so dependent upon X11 that if we're not building with X,
# it's not even worth trying to configure, much less build, that tool.
case ${with_x} in
yes | "") ;; # the default value for this tree is that X11 is available
no)
- skipdirs="${skipdirs} tk tix itcl libgui"
+ skipdirs="${skipdirs} tk itcl libgui"
# We won't be able to build gdbtk without X.
- enable_gdbtk=no
+ enable_gdbtk=no
;;
*) echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2 ;;
esac
# Some tools are only suitable for building in a "native" situation.
-# Remove these if host!=target.
+# Remove these if host!=target.
native_only="autoconf automake libtool fileutils find gawk gettext gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff gprof target-groff guile perl time ash bash bzip2 prms gnuserv target-gperf"
# Similarly, some are only suitable for cross toolchains.
# If both --with-headers and --with-libs are specified, default to
# --without-newlib.
-if test x"${with_headers}" != x && test x"${with_headers} != xno \
- && test x"${with_libs}" != x && test x"${with_libs} != xno ; then
+if test x"${with_headers}" != x && test x"${with_headers}" != xno \
+ && test x"${with_libs}" != x && test x"${with_libs}" != xno ; then
if test x"${with_newlib}" = x ; then
with_newlib=no
fi
configdirs="$configdirs libtermcap" ;;
esac
-# Remove more programs from consideration, based on the host or
+# A target can indicate whether a language isn't supported for some reason.
+# Only spaces may be used in this macro; not newlines or tabs.
+unsupported_languages=
+
+# Remove more programs from consideration, based on the host or
# target this usually means that a port of the program doesn't
# exist yet.
noconfigdirs="$noconfigdirs byacc"
;;
i[3456789]86-*-vsta)
- noconfigdirs="$noconfigdirs tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl tix gnuserv gettext"
+ noconfigdirs="$noconfigdirs tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl gnuserv gettext"
;;
i[3456789]86-*-go32* | i[3456789]86-*-msdosdjgpp*)
- noconfigdirs="$noconfigdirs tcl tk expect dejagnu send-pr uudecode guile itcl tix gnuserv libffi"
+ noconfigdirs="$noconfigdirs tcl tk expect dejagnu send-pr uudecode guile itcl gnuserv libffi"
;;
i[3456789]86-*-mingw32*)
- # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl tix gnuserv"
+ # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl gnuserv"
noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool"
;;
i[3456789]86-*-beos*)
- noconfigdirs="$noconfigdirs tk itcl tix libgui gdb"
+ noconfigdirs="$noconfigdirs tk itcl libgui gdb"
;;
*-*-cygwin*)
noconfigdirs="$noconfigdirs autoconf automake send-pr rcs guile perl"
noconfigdirs="$noconfigdirs rcs"
;;
ppc*-*-pe)
- noconfigdirs="$noconfigdirs patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl tix gnuserv"
+ noconfigdirs="$noconfigdirs patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl gnuserv"
;;
powerpc-*-beos*)
- noconfigdirs="$noconfigdirs tk itcl tix libgui gdb dejagnu readline"
- ;;
- *-*-darwin*)
- noconfigdirs="$noconfigdirs tk itcl tix libgui"
+ noconfigdirs="$noconfigdirs tk itcl libgui gdb dejagnu readline"
;;
esac
+
# Check whether --enable-libada or --disable-libada was given.
if test "${enable_libada+set}" = set; then
enableval="$enable_libada"
ENABLE_LIBADA=$enableval
else
ENABLE_LIBADA=yes
-fi
-
+fi;
if test "${ENABLE_LIBADA}" != "yes" ; then
noconfigdirs="$noconfigdirs target-libada"
+ noconfigdirs="$noconfigdirs gnattools"
+fi
+
+# Check whether --enable-libssp or --disable-libssp was given.
+if test "${enable_libssp+set}" = set; then
+ enableval="$enable_libssp"
+ ENABLE_LIBSSP=$enableval
+else
+ ENABLE_LIBSSP=yes
+fi;
+if test "${ENABLE_LIBSSP}" != "yes" ; then
+ noconfigdirs="$noconfigdirs target-libssp"
fi
# Save it here so that, even in case of --enable-libgcj, if the Java
;;
esac
+
+# Allow --disable-libmudflap to exclude target-libmudflap
+case $enable_libmudflap in
+yes)
+ ;;
+no)
+ noconfigdirs="$noconfigdirs target-libmudflap"
+ ;;
+"")
+ case "${target}" in
+ *-*-linux*-gnu | *-*-gnu* | *-*-k*bsd*-gnu)
+ # Enable libmudflap by default in GNU and friends.
+ ;;
+ *-*-freebsd*)
+ # Enable libmudflap by default in FreeBSD.
+ ;;
+ *)
+ # Disable it by default everywhere else.
+ noconfigdirs="$noconfigdirs target-libmudflap"
+ ;;
+ esac
+esac
+
+
case "${target}" in
*-*-chorusos)
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
powerpc-*-darwin*)
noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
- noconfigdirs="$noconfigdirs target-libobjc"
+ noconfigdirs="$noconfigdirs sim target-rda"
;;
*-*-darwin*)
noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
- noconfigdirs="$noconfigdirs target-libobjc ${libgcj}"
+ noconfigdirs="$noconfigdirs sim target-rda"
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
*-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
+ *-*-freebsd*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ if test "x$with_gmp" = x && test "x$with_gmp_dir" = x \
+ && test -f /usr/local/include/gmp.h; then
+ with_gmp=/usr/local
+ fi
+
+ # Skip some stuff that's unsupported on some FreeBSD configurations.
+ case "${target}" in
+ i*86-*-*) ;;
+ alpha*-*-*) ;;
+ *)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ esac
+ ;;
*-*-kaos*)
# Remove unsupported stuff on all kaOS configurations.
- skipdirs="target-libiberty ${libgcj} target-libstdc++-v3 target-libf2c target-librx"
+ skipdirs="target-libiberty ${libgcj} target-libstdc++-v3 target-librx"
skipdirs="$skipdirs target-libobjc target-examples target-groff target-gperf"
skipdirs="$skipdirs zlib fastjar target-libjava target-boehm-gc target-zlib"
noconfigdirs="$noconfigdirs target-libgloss"
;;
esac
;;
- *-*-netware)
- noconfigdirs="$noconfigdirs target-libstdc++-v3 target-newlib target-libiberty target-libgloss ${libgcj}"
+ *-*-netware*)
+ noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss ${libgcj} target-libmudflap"
;;
*-*-rtems*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- case ${target} in
- h8300*-*-* | h8500-*-*)
- noconfigdirs="$noconfigdirs target-libf2c"
- ;;
- *) ;;
- esac
+ ;;
+ # The tpf target doesn't support gdb yet.
+ *-*-tpf*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty ${libgcj} target-libmudflap gdb tcl tk libgui itcl"
;;
*-*-uclinux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss target-rda ${libgcj}"
;;
*-*-vxworks*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty ${libgcj}"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty target-libstdc++-v3 ${libgcj}"
+ ;;
+ m32c-*-*)
+ noconfigdirs="$noconfigdirs target-libstdc++-v3"
;;
alpha*-dec-osf*)
# ld works, but does not support shared libraries.
# newlib is not 64 bit ready
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
- alpha*-*-freebsd* | alpha*-*-kfreebsd*-gnu)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss"
- ;;
alpha*-*-*)
# newlib is not 64 bit ready
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
sh-*-linux*)
noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
- ;;
+ ;;
sh*-*-pe|mips*-*-pe|*arm-wince-pe)
noconfigdirs="$noconfigdirs ${libgcj}"
noconfigdirs="$noconfigdirs target-examples"
noconfigdirs="$noconfigdirs target-libiberty texinfo send-pr"
- noconfigdirs="$noconfigdirs tcl tix tk itcl libgui sim"
+ noconfigdirs="$noconfigdirs tcl tk itcl libgui sim"
noconfigdirs="$noconfigdirs expect dejagnu"
# the C++ libraries don't build on top of CE's C libraries
noconfigdirs="$noconfigdirs target-libstdc++-v3"
arc-*-*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
+ arm-semi-aof )
+ ;;
arm-*-coff | strongarm-*-coff | xscale-*-coff)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
- arm-*-elf* | strongarm-*-elf* | xscale-*-elf*)
+ arm-*-elf* | strongarm-*-elf* | xscale-*-elf* | arm*-*-eabi* )
noconfigdirs="$noconfigdirs target-libffi target-qthreads"
;;
- arm-*-pe*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+ arm*-*-symbianelf*)
+ noconfigdirs="$noconfigdirs ${libgcj} target-libiberty"
;;
- arm-*-oabi*)
+ arm-*-pe*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
thumb-*-coff)
thumb-*-elf)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
- thumb-*-oabi)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
thumb-*-pe)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
avr-*-*)
noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
;;
+ bfin-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss gdb"
+ if x${is_cross_compiler} != xno ; then
+ target_configdirs="${target_configdirs} target-bsp target-cygmon"
+ fi
+ ;;
c4x-*-* | tic4x-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
;;
c54x*-*-* | tic54x-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib"
;;
- cris-*-*)
- noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
+ cris-*-* | crisv32-*-*)
+ unsupported_languages="$unsupported_languages java"
+ case "${target}" in
+ *-*-aout)
+ unsupported_languages="$unsupported_languages fortran"
+ noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
+ *-*-elf)
+ unsupported_languages="$unsupported_languages fortran"
+ noconfigdirs="$noconfigdirs target-boehm-gc";;
+ *-*-linux*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss";;
+ *)
+ unsupported_languages="$unsupported_languages fortran"
+ noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss";;
+ esac
+ ;;
+ crx-*-*)
+ noconfigdirs="$noconfigdirs target-libstdc++-v3 target-mudflap ${libgcj}"
;;
d10v-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
noconfigdirs="$noconfigdirs ${libgcj}"
;;
h8300*-*-*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj} target-libf2c"
+ noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
h8500-*-*)
- noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} target-libf2c"
+ noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
+ ;;
+ hppa1.1-*-osf* | hppa1.1-*-bsd* )
;;
hppa*64*-*-linux* | parisc*64*-*-linux*)
# In this case, it's because the hppa64-linux target is for
# headers, crt*.o, etc., all of which are needed by these.
noconfigdirs="$noconfigdirs target-zlib"
;;
+ parisc*-*-linux* | hppa*-*-linux*)
+ ;;
hppa*-*-*elf* | \
- parisc*-*-linux* | hppa*-*-linux* | \
hppa*-*-lites* | \
hppa*-*-openbsd* | \
hppa*64*-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
- # Do configure ld/binutils/gas for this case.
;;
hppa*-*-*)
# According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
;;
ia64*-*-elf*)
# No gdb support yet.
- noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb"
+ noconfigdirs="$noconfigdirs readline mmalloc libgui itcl gdb"
;;
ia64*-**-hpux*)
# No gdb or ld support yet.
- noconfigdirs="$noconfigdirs ${libgcj} tix readline mmalloc libgui itcl gdb ld"
+ noconfigdirs="$noconfigdirs ${libgcj} readline mmalloc libgui itcl gdb ld"
+ ;;
+ i370-*-opened*)
;;
i[3456789]86-*-coff | i[3456789]86-*-elf)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
- i[3456789]86-*-freebsd* | i[3456789]86-*-kfreebsd*-gnu)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss"
- ;;
i[3456789]86-*-linux*)
# The GCC port for glibc1 has no MD_FALLBACK_FRAME_STATE_FOR, so let's
# not build java stuff by default.
# Can't build gdb for mingw32 if not native.
case "${host}" in
i[3456789]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
- *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix gnuserv"
+ *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl gnuserv"
;;
esac
- ;;
+ ;;
*-*-cygwin*)
target_configdirs="$target_configdirs target-libtermcap target-winsup"
noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}"
- # always build newlib.
- skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
+ # always build newlib if winsup directory is present.
+ if test -d "$srcdir/winsup"; then
+ skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
+ elif test -d "$srcdir/newlib"; then
+ echo "Warning: winsup is missing so newlib can't be built."
+ fi
# Can't build gdb for Cygwin if not native.
case "${host}" in
*-*-cygwin*) ;; # keep gdb tcl tk expect etc.
- *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix libgui gnuserv"
+ *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl libgui gnuserv"
;;
esac
- ;;
+ ;;
+ i[3456789]86-moss-msdos | i[3456789]86-*-moss* | \
+ i[3456789]86-*-uwin* | i[3456789]86-*-interix* )
+ ;;
i[3456789]86-*-pe)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
;;
noconfigdirs="$noconfigdirs target-libstdc++-v3"
;;
mmix-*-*)
- noconfigdirs="$noconfigdirs ${libgcj} gdb libgloss"
+ noconfigdirs="$noconfigdirs target-libffi target-boehm-gc gdb libgloss"
+ unsupported_languages="$unsupported_languages fortran java"
;;
mn10200-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
mn10300-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
+ ms1-*-*)
+ noconfigdirs="$noconfigdirs sim"
+ ;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
- noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp ${libgcj}"
;;
powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
target_configdirs="$target_configdirs target-winsup"
- noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl tix gnuserv ${libgcj}"
+ noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl gnuserv ${libgcj}"
# always build newlib.
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
;;
# This is temporary until we can link against shared libraries
powerpcle-*-solaris*)
- noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl tix gnuserv ${libgcj}"
+ noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl gnuserv ${libgcj}"
;;
powerpc-*-beos*)
noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
powerpc-*-eabi)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
+ powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems* )
+ ;;
rs6000-*-lynxos*)
noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
;;
rs6000-*-aix*)
- noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp ${libgcj}"
;;
rs6000-*-*)
noconfigdirs="$noconfigdirs gprof ${libgcj}"
noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss ${libgcj}"
;;
mips*-*-irix5*)
- # The GNU linker does not support shared libraries.
- noconfigdirs="$noconfigdirs ld gprof target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
;;
mips*-*-irix6*)
# Linking libjava exceeds command-line length limits on at least
romp-*-*)
noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
;;
- sh-*-*)
+ sh-*-* | sh64-*-*)
case "${host}" in
i[3456789]86-*-vsta) ;; # don't add gprof back in
i[3456789]86-*-go32*) ;; # don't add gprof back in
esac
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
- sh64-*-*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
sparc-*-elf*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
use_gnu_ld=no
fi
;;
+ sparc-*-solaris2.[0-6] | sparc-*-solaris2.[0-6].*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
;;
v810-*-*)
ip2k-*-*)
noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
;;
- *-*-linux*)
+ *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
*-*-lynxos*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
- ;;
+ ;;
*-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
host_makefile_frag="config/mh-cygwin"
;;
*-mingw32*)
- host_makefile_frag="config/mh-mingw32"
;;
*-interix*)
host_makefile_frag="config/mh-interix"
tentative_cc="/usr/cygnus/progressive/bin/gcc"
host_makefile_frag="config/mh-lynxrs6k"
;;
+ powerpc-*-darwin*)
+ host_makefile_frag="config/mh-ppc-darwin"
+ ;;
*-*-lynxos*)
# /bin/cc is less than useful for our purposes. Always use GCC
tentative_cc="/bin/gcc"
*-*-sysv4*)
host_makefile_frag="config/mh-sysv4"
;;
+ # This is placed last to prevent interfering with the cases above.
+ i[3456789]86-*-*)
+ # Build the stage2 and stage3 compilers with -fomit-frame-pointer.
+ host_makefile_frag="config/mh-x86omitfp"
+ ;;
esac
fi
# If we are doing a Canadian Cross, in which the host and build systems
# are not the same, we set reasonable default values for the tools.
- BISON=${BISON-bison}
CC=${CC-${host_alias}-gcc}
CFLAGS=${CFLAGS-"-g -O2"}
CXX=${CXX-${host_alias}-c++}
CXXFLAGS=${CXXFLAGS-"-g -O2"}
CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
- CC_FOR_TARGET=${CC_FOR_TARGET-${target_alias}-gcc}
- CXX_FOR_TARGET=${CXX_FOR_TARGET-${target_alias}-c++}
- GCJ_FOR_TARGET=${GCJ_FOR_TARGET-${target_alias}-gcj}
- GCC_FOR_TARGET=${GCC_FOR_TARGET-${CC_FOR_TARGET-${target_alias}-gcc}}
BUILD_PREFIX=${build_alias}-
BUILD_PREFIX_1=${build_alias}-
- MAKEINFO=${MAKEINFO-makeinfo}
-
- if test -z "${YACC}" ; then
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/bison; then
- YACC="bison -y"
- break
- fi
- if test -f $dir/byacc; then
- YACC=byacc
- break
- fi
- if test -f $dir/yacc; then
- YACC=yacc
- break
- fi
- done
- IFS="$save_ifs"
- if test -z "${YACC}" ; then
- YACC="bison -y"
- fi
- fi
-
- if test -z "${LEX}" ; then
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/flex; then
- LEX=flex
- break
- fi
- if test -f $dir/lex; then
- LEX=lex
- break
- fi
- done
- IFS="$save_ifs"
- LEX=${LEX-flex}
- fi
else
# Set reasonable default values for some tools even if not Canadian.
# in Makefile.in, so can still be overridden by fragments.
# This is all going to change when we autoconfiscate...
- BISON="\$(USUAL_BISON)"
CC_FOR_BUILD="\$(CC)"
- GCC_FOR_TARGET="\$(USUAL_GCC_FOR_TARGET)"
BUILD_PREFIX=
BUILD_PREFIX_1=loser-
- MAKEINFO="\$(USUAL_MAKEINFO)"
- LEX="\$(USUAL_LEX)"
- YACC="\$(USUAL_YACC)"
-
- # If CC is still not set, try to get gcc.
- cc_prog_is_gcc=
- if test -z "${CC}" ; then
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/gcc; then
- CC="gcc"
- cc_prog_is_gcc=yes
- echo 'void f(){}' > conftest.c
- if test -z "`${CC} -g -c conftest.c 2>&1`"; then
- CFLAGS=${CFLAGS-"-g -O2"}
- CXXFLAGS=${CXXFLAGS-"-g -O2"}
- else
- CFLAGS=${CFLAGS-"-O2"}
- CXXFLAGS=${CXXFLAGS-"-O2"}
- fi
- rm -f conftest*
- break
- fi
- done
- IFS="$save_ifs"
- CC=${CC-cc}
- else
- # Determine if we are using gcc.
- cat > conftest.c <<EOF
-#ifdef __GNUC__
- yes;
-#endif
-EOF
- if ${CC} -E conftest.c | grep yes >/dev/null 2>&1; then
- cc_prog_is_gcc=yes
- fi
- rm -f conftest.c
- if test -z "${CFLAGS}"; then
- # Here CC is set but CFLAGS is not. Use a quick hack to use -O2 if CC
- # is set to a version of gcc.
- if test "$cc_prog_is_gcc" = yes; then
- echo 'void f(){}' > conftest.c
- if test -z "`${CC} -g -c conftest.c 2>&1`"; then
- CFLAGS=${CFLAGS-"-g -O2"}
- CXXFLAGS=${CXXFLAGS-"-g -O2"}
- else
- CFLAGS=${CFLAGS-"-O2"}
- CXXFLAGS=${CXXFLAGS-"-O2"}
- fi
- rm -f conftest*
- fi
- fi
+
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
fi
+done
+done
- # We must set the default linker to the linker used by gcc for the correct
- # operation of libtool. If LD is not defined and we are using gcc, try to
- # set the LD default to the ld used by gcc.
- if test -z "$LD"; then
- if test "$cc_prog_is_gcc" = yes; then
- case $build in
- *-*-mingw*)
- gcc_prog_ld=`$CC -print-prog-name=ld 2>&1 | tr -d '\015'` ;;
- *)
- gcc_prog_ld=`$CC -print-prog-name=ld 2>&1` ;;
- esac
- case $gcc_prog_ld in
- # Accept absolute paths.
- [\\/]* | [A-Za-z]:[\\/]*)
- LD="$gcc_prog_ld" ;;
- esac
- fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="gcc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
fi
+done
+done
- CXX=${CXX-"c++"}
- CFLAGS=${CFLAGS-"-g"}
- CXXFLAGS=${CXXFLAGS-"-g -O2"}
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-if test $host != $build; then
- ac_tool_prefix=${host_alias}-
+ CC=$ac_ct_CC
else
- ac_tool_prefix=
+ CC="$ac_cv_prog_CC"
fi
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1858: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CC="gcc"
- break
- fi
- done
- IFS="$ac_save_ifs"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-CC="$ac_cv_prog_CC"
+CC=$ac_cv_prog_CC
if test -n "$CC"; then
- echo "$ac_t""$CC" 1>&6
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ CC=$ac_ct_CC
else
- echo "$ac_t""no" 1>&6
+ CC="$ac_cv_prog_CC"
fi
+fi
if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1888: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_prog_rejected=no
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
- break
- fi
- done
- IFS="$ac_save_ifs"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
if test $ac_prog_rejected = yes; then
# We found a bogon in the path, so make sure we never use it.
set dummy $ac_cv_prog_CC
shift
- if test $# -gt 0; then
+ if test $# != 0; then
# We chose a different compiler from the bogus one.
# However, it has the same basename, so the bogon will be chosen
# first if we set CC to just the basename; use the full file name.
shift
- set dummy "$ac_dir/$ac_word" "$@"
- shift
- ac_cv_prog_CC="$@"
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
fi
fi
fi
fi
-CC="$ac_cv_prog_CC"
+CC=$ac_cv_prog_CC
if test -n "$CC"; then
- echo "$ac_t""$CC" 1>&6
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
- if test -z "$CC"; then
- case "`uname -s`" in
- *win32* | *WIN32*)
- # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1939: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+fi
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in cl
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CC="cl"
- break
- fi
- done
- IFS="$ac_save_ifs"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-CC="$ac_cv_prog_CC"
+CC=$ac_cv_prog_CC
if test -n "$CC"; then
- echo "$ac_t""$CC" 1>&6
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
- ;;
- esac
- fi
- test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1971: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext << EOF
-
-#line 1982 "configure"
-#include "confdefs.h"
-main(){return(0);}
-EOF
-if { (eval echo configure:1987: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- ac_cv_prog_cc_works=yes
- # If we can't run a trivial program, we are probably using a cross compiler.
- if (./conftest; exit) 2>/dev/null; then
- ac_cv_prog_cc_cross=no
- else
- ac_cv_prog_cc_cross=yes
- fi
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- ac_cv_prog_cc_works=no
+ test -n "$CC" && break
+ done
fi
-rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
- { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2013: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2018: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.c <<EOF
-#ifdef __GNUC__
- yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2027: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
- ac_cv_prog_gcc=yes
+if test -z "$CC"; then
+ ac_ct_CC=$CC
+ for ac_prog in cl
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- ac_cv_prog_gcc=no
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+ test -n "$ac_ct_CC" && break
+done
-if test $ac_cv_prog_gcc = yes; then
- GCC=yes
+ CC=$ac_ct_CC
+fi
+
+fi
+
+
+test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&5
+echo "$as_me: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+
+# Provide some information about the compiler.
+echo "$as_me:$LINENO:" \
+ "checking for C compiler version" >&5
+ac_compiler=`set X $ac_compile; echo $2`
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
+ (eval $ac_compiler --version </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
+ (eval $ac_compiler -v </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
+ (eval $ac_compiler -V </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
+echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
+ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
+ (eval $ac_link_default) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # Find the output, starting from the most likely. This scheme is
+# not robust to junk in `.', hence go to wildcards (a.*) only as a last
+# resort.
+
+# Be careful to initialize this variable, since it used to be cached.
+# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
+ac_cv_exeext=
+# b.out is created by i960 compilers.
+for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
+do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
+ ;;
+ conftest.$ac_ext )
+ # This is the source file.
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+ # certainly right.
+ break;;
+ *.* )
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ # FIXME: I believe we export ac_cv_exeext for Libtool,
+ # but it would be cool to find out if it's true. Does anybody
+ # maintain Libtool? --akim.
+ export ac_cv_exeext
+ break;;
+ * )
+ break;;
+ esac
+done
else
- GCC=
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
+See \`config.log' for more details." >&5
+echo "$as_me: error: C compiler cannot create executables
+See \`config.log' for more details." >&2;}
+ { (exit 77); exit 77; }; }
+fi
+
+ac_exeext=$ac_cv_exeext
+echo "$as_me:$LINENO: result: $ac_file" >&5
+echo "${ECHO_T}$ac_file" >&6
+
+# Check the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
+# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
+# If not cross compiling, check that we can run a simple program.
+if test "$cross_compiling" != yes; then
+ if { ac_try='./$ac_file'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+ { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ fi
fi
-
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2046: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+
+rm -f a.out a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+# Check the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
+echo "$as_me:$LINENO: result: $cross_compiling" >&5
+echo "${ECHO_T}$cross_compiling" >&6
+
+echo "$as_me:$LINENO: checking for suffix of executables" >&5
+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ export ac_cv_exeext
+ break;;
+ * ) break;;
+ esac
+done
+else
+ { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+rm -f conftest$ac_cv_exeext
+echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+echo "${ECHO_T}$ac_cv_exeext" >&6
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+echo "$as_me:$LINENO: checking for suffix of object files" >&5
+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
+if test "${ac_cv_objext+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+done
else
- echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+echo "${ECHO_T}$ac_cv_objext" >&6
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
+if test "${ac_cv_c_compiler_gnu+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_compiler_gnu=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_compiler_gnu=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
+GCC=`test $ac_compiler_gnu = yes && echo yes`
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+CFLAGS="-g"
+echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_g+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_prog_cc_g=yes
else
- ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+ac_cv_prog_cc_g=no
fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
if test "$ac_test_CFLAGS" = set; then
- CFLAGS="$ac_save_CFLAGS"
+ CFLAGS=$ac_save_CFLAGS
elif test $ac_cv_prog_cc_g = yes; then
if test "$GCC" = yes; then
CFLAGS="-g -O2"
CFLAGS=
fi
fi
+echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
+echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_stdc+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_prog_cc_stdc=no
+ac_save_CC=$CC
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
+ function prototypes and stuff, but not '\xHH' hex character constants.
+ These don't provoke an error unfortunately, instead are silently treated
+ as 'x'. The following induces an error, until -std1 is added to get
+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
+ array size at least. It's necessary to write '\x00'==0 to get something
+ that's true only with -std1. */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+# Don't try gcc -ansi; that turns off useful extensions and
+# breaks some systems' header files.
+# AIX -qlanglvl=ansi
+# Ultrix and OSF/1 -std1
+# HP-UX 10.20 and later -Ae
+# HP-UX older versions -Aa -D_HPUX_SOURCE
+# SVR4 -Xc -D__EXTENSIONS__
+for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_prog_cc_stdc=$ac_arg
+break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext
+done
+rm -f conftest.$ac_ext conftest.$ac_objext
+CC=$ac_save_CC
+
+fi
+
+case "x$ac_cv_prog_cc_stdc" in
+ x|xno)
+ echo "$as_me:$LINENO: result: none needed" >&5
+echo "${ECHO_T}none needed" >&6 ;;
+ *)
+ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
+ CC="$CC $ac_cv_prog_cc_stdc" ;;
+esac
+
+# Some people use a C++ compiler to compile C. Since we use `exit',
+# in C++ we need to declare it. In case someone uses the same compiler
+# for both compiling C and C++ we need to have the C++ compiler decide
+# the declaration of exit, since it's the most demanding environment.
+cat >conftest.$ac_ext <<_ACEOF
+#ifndef __cplusplus
+ choke me
+#endif
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ for ac_declaration in \
+ '' \
+ 'extern "C" void std::exit (int) throw (); using std::exit;' \
+ 'extern "C" void std::exit (int); using std::exit;' \
+ 'extern "C" void exit (int) throw ();' \
+ 'extern "C" void exit (int);' \
+ 'void exit (int);'
+do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_declaration
+#include <stdlib.h>
+int
+main ()
+{
+exit (42);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+continue
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_declaration
+int
+main ()
+{
+exit (42);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+rm -f conftest*
+if test -n "$ac_declaration"; then
+ echo '#ifdef __cplusplus' >>confdefs.h
+ echo $ac_declaration >>confdefs.h
+ echo '#endif' >>confdefs.h
+fi
+
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+ # We must set the default linker to the linker used by gcc for the correct
+ # operation of libtool. If LD is not defined and we are using gcc, try to
+ # set the LD default to the ld used by gcc.
+ if test -z "$LD"; then
+ if test "$GCC" = yes; then
+ case $build in
+ *-*-mingw*)
+ gcc_prog_ld=`$CC -print-prog-name=ld 2>&1 | tr -d '\015'` ;;
+ *)
+ gcc_prog_ld=`$CC -print-prog-name=ld 2>&1` ;;
+ esac
+ case $gcc_prog_ld in
+ # Accept absolute paths.
+ [\\/]* | [A-Za-z]:[\\/]*)
+ LD="$gcc_prog_ld" ;;
+ esac
+ fi
+ fi
+
+ CXX=${CXX-"c++"}
+ CFLAGS=${CFLAGS-"-g"}
+ CXXFLAGS=${CXXFLAGS-"-g -O2"}
+fi
+
-# Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2082: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_GNATBIND+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$GNATBIND"; then
ac_cv_prog_GNATBIND="$GNATBIND" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_GNATBIND="${ac_tool_prefix}gnatbind"
- break
- fi
- done
- IFS="$ac_save_ifs"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_GNATBIND="${ac_tool_prefix}gnatbind"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-GNATBIND="$ac_cv_prog_GNATBIND"
+GNATBIND=$ac_cv_prog_GNATBIND
if test -n "$GNATBIND"; then
- echo "$ac_t""$GNATBIND" 1>&6
+ echo "$as_me:$LINENO: result: $GNATBIND" >&5
+echo "${ECHO_T}$GNATBIND" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
+fi
if test -z "$ac_cv_prog_GNATBIND"; then
-if test -n "$ac_tool_prefix"; then
+ ac_ct_GNATBIND=$GNATBIND
# Extract the first word of "gnatbind", so it can be a program name with args.
set dummy gnatbind; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2114: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_GNATBIND+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$GNATBIND"; then
- ac_cv_prog_GNATBIND="$GNATBIND" # Let the user override the test.
+ if test -n "$ac_ct_GNATBIND"; then
+ ac_cv_prog_ac_ct_GNATBIND="$ac_ct_GNATBIND" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_GNATBIND="gnatbind"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_GNATBIND" && ac_cv_prog_GNATBIND="no"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_GNATBIND="gnatbind"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ test -z "$ac_cv_prog_ac_ct_GNATBIND" && ac_cv_prog_ac_ct_GNATBIND="no"
fi
fi
-GNATBIND="$ac_cv_prog_GNATBIND"
-if test -n "$GNATBIND"; then
- echo "$ac_t""$GNATBIND" 1>&6
+ac_ct_GNATBIND=$ac_cv_prog_ac_ct_GNATBIND
+if test -n "$ac_ct_GNATBIND"; then
+ echo "$as_me:$LINENO: result: $ac_ct_GNATBIND" >&5
+echo "${ECHO_T}$ac_ct_GNATBIND" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
+ GNATBIND=$ac_ct_GNATBIND
else
- GNATBIND="no"
-fi
+ GNATBIND="$ac_cv_prog_GNATBIND"
fi
-echo $ac_n "checking whether compiler driver understands Ada""... $ac_c" 1>&6
-echo "configure:2147: checking whether compiler driver understands Ada" >&5
-if eval "test \"`echo '$''{'acx_cv_cc_gcc_supports_ada'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:$LINENO: checking whether compiler driver understands Ada" >&5
+echo $ECHO_N "checking whether compiler driver understands Ada... $ECHO_C" >&6
+if test "${acx_cv_cc_gcc_supports_ada+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.adb <<EOF
procedure conftest is begin null; end conftest;
# has not been installed. This is fixed in 2.95.4, 3.0.2, and 3.1.
# Therefore we must check for the error message as well as an
# unsuccessful exit.
+# Other compilers, like HP Tru64 UNIX cc, exit successfully when
+# given a .adb file, but produce no object file. So we must check
+# if an object file was really produced to guard against this.
errors=`(${CC} -c conftest.adb) 2>&1 || echo failure`
-if test x"$errors" = x; then
+if test x"$errors" = x && test -f conftest.$ac_objext; then
acx_cv_cc_gcc_supports_ada=yes
- break
fi
rm -f conftest.*
fi
+echo "$as_me:$LINENO: result: $acx_cv_cc_gcc_supports_ada" >&5
+echo "${ECHO_T}$acx_cv_cc_gcc_supports_ada" >&6
-echo "$ac_t""$acx_cv_cc_gcc_supports_ada" 1>&6
-
-if test x$GNATBIND != xno && test x$acx_cv_gcc_supports_ada != xno; then
+if test x$GNATBIND != xno && test x$acx_cv_cc_gcc_supports_ada != xno; then
have_gnat=yes
else
have_gnat=no
fi
+echo "$as_me:$LINENO: checking how to compare bootstrapped objects" >&5
+echo $ECHO_N "checking how to compare bootstrapped objects... $ECHO_C" >&6
+if test "${gcc_cv_prog_cmp_skip+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ echo abfoo >t1
+ echo cdfoo >t2
+ gcc_cv_prog_cmp_skip='tail +16c $$f1 > tmp-foo1; tail +16c $$f2 > tmp-foo2; cmp tmp-foo1 tmp-foo2'
+ if cmp t1 t2 2 2 > /dev/null 2>&1; then
+ if cmp t1 t2 1 1 > /dev/null 2>&1; then
+ :
+ else
+ gcc_cv_prog_cmp_skip='cmp $$f1 $$f2 16 16'
+ fi
+ fi
+ if cmp --ignore-initial=2 t1 t2 > /dev/null 2>&1; then
+ if cmp --ignore-initial=1 t1 t2 > /dev/null 2>&1; then
+ :
+ else
+ gcc_cv_prog_cmp_skip='cmp --ignore-initial=16 $$f1 $$f2'
+ fi
+ fi
+ rm t1 t2
+
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_prog_cmp_skip" >&5
+echo "${ECHO_T}$gcc_cv_prog_cmp_skip" >&6
+do_compare="$gcc_cv_prog_cmp_skip"
+
+
+
+# Check for GMP and MPFR
+gmplibs=
+gmpinc=
+have_gmp=yes
+# Specify a location for mpfr
+# check for this first so it ends up on the link line before gmp.
+
+# Check whether --with-mpfr-dir or --without-mpfr-dir was given.
+if test "${with_mpfr_dir+set}" = set; then
+ withval="$with_mpfr_dir"
+
+fi;
+
+if test "x$with_mpfr_dir" != x; then
+ gmpinc="-I$with_mpfr_dir"
+ gmplibs="$with_mpfr_dir/libmpfr.a"
+else
+ gmplibs="-lmpfr"
+fi
+
+
+# Check whether --with-mpfr or --without-mpfr was given.
+if test "${with_mpfr+set}" = set; then
+ withval="$with_mpfr"
+
+fi;
+
+if test "x$with_mpfr" != x; then
+ gmplibs="-L$with_mpfr/lib $gmplibs"
+ gmpinc="-I$with_mpfr/include"
+fi
+
+# Specify a location for gmp
+
+# Check whether --with-gmp-dir or --without-gmp-dir was given.
+if test "${with_gmp_dir+set}" = set; then
+ withval="$with_gmp_dir"
+
+fi;
+
+if test "x$with_gmp_dir" != x; then
+ gmpinc="$gmpinc -I$with_gmp_dir"
+ if test -f "$with_gmp_dir/.libs/libgmp.a"; then
+ gmplibs="$gmplibs $with_gmp_dir/.libs/libgmp.a"
+ elif test -f "$with_gmp_dir/_libs/libgmp.a"; then
+ gmplibs="$gmplibs $with_gmp_dir/_libs/libgmp.a"
+ fi
+ # One of the later tests will catch the error if neither library is present.
+else
+ gmplibs="$gmplibs -lgmp"
+fi
+
+
+# Check whether --with-gmp or --without-gmp was given.
+if test "${with_gmp+set}" = set; then
+ withval="$with_gmp"
+
+fi;
+
+if test "x$with_gmp" != x; then
+ gmplibs="-L$with_gmp/lib $gmplibs"
+ gmpinc="-I$with_gmp/include $gmpinc"
+fi
+
+saved_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS $gmpinc"
+# Check GMP actually works
+echo "$as_me:$LINENO: checking for correct version of gmp.h" >&5
+echo $ECHO_N "checking for correct version of gmp.h... $ECHO_C" >&6
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include "gmp.h"
+int
+main ()
+{
+
+#if __GNU_MP_VERSION < 3
+choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; have_gmp=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test x"$have_gmp" = xyes; then
+ echo "$as_me:$LINENO: checking for MPFR" >&5
+echo $ECHO_N "checking for MPFR... $ECHO_C" >&6
+
+ saved_LIBS="$LIBS"
+ LIBS="$LIBS $gmplibs"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <gmp.h>
+#include <mpfr.h>
+int
+main ()
+{
+mpfr_t n; mpfr_init(n);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; have_gmp=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS="$saved_LIBS"
+ CFLAGS="$saved_CFLAGS"
+fi
+
+# Flags needed for both GMP and/or MPFR
+
+
# By default, C is the only stage 1 language.
stage1_languages=c
fi
enable_languages=`echo "${enable_languages}" | sed -e 's/[ ,][ ,]*/,/g' -e 's/,$//'`
+ # 'f95' is the old name for the 'fortran' language. We issue a warning
+ # and make the substitution.
+ case ,${enable_languages}, in
+ *,f95,*)
+ echo configure.in: warning: 'f95' as language name is deprecated, use 'fortran' instead 1>&2
+ enable_languages=`echo "${enable_languages}" | sed -e 's/f95/fortran/g'`
+ ;;
+ esac
+
# First scan to see if an enabled language requires some other language.
# We assume that a given config-lang.in will list all the language
# front ends it requires, even if some are required indirectly.
new_enable_languages=c
missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ `
+ potential_languages=c
for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
case ${lang_frag} in
# an apparent bug in bash 1.12 on linux.
${srcdir}/gcc/[*]/config-lang.in) ;;
*)
- # From the config-lang.in, get $language, $target_libs,
+ # From the config-lang.in, get $language, $target_libs,
# $lang_dirs, $boot_language, and $build_by_default
language=
target_libs=
lang_dirs=
boot_language=
build_by_default=
+ need_gmp=
. ${lang_frag}
+ potential_languages="${potential_languages},${language}"
# This is quite sensitive to the ordering of the case statement arms.
case ,${enable_languages},:${language}:${have_gnat}:${build_by_default} in
*::*:*)
echo "${lang_frag} doesn't set \$language." 1>&2
exit 1
- ;;
+ ;;
*:ada:no:*)
# Ada was requested with no preexisting GNAT. Disable unconditionally.
add_this_lang=no
;;
*,all,*:*:*:no)
# 'all' was selected, but this is not a default language
- # so do not include it.
+ # so do not include it.
add_this_lang=no
- ;;
+ ;;
*,all,*:*:*:*)
# 'all' was selected and this is a default language; include it.
add_this_lang=yes
add_this_lang=no
;;
esac
- case $add_this_lang in
+
+ # Disable languages that need GMP if it isn't available.
+ case ,${enable_languages},:${have_gmp}:${need_gmp} in
+ *,${language},*:no:yes)
+ # Specifically requested language; tell them.
+ { { echo "$as_me:$LINENO: error: GMP with MPFR support is required to build $language" >&5
+echo "$as_me: error: GMP with MPFR support is required to build $language" >&2;}
+ { (exit 1); exit 1; }; }
+ ;;
+ *:no:yes)
+ # Silently disable.
+ add_this_lang=no
+ ;;
+ esac
+
+ # Disable a language that is unsupported by the target.
+ case " $unsupported_languages " in
+ *" $language "*)
+ add_this_lang=no
+ ;;
+ esac
+
+ case $add_this_lang in
no)
# Remove language-dependent dirs.
eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
missing_languages=`echo "$missing_languages" | sed -e "s/^,//" -e "s/,$//"`
if test "x$missing_languages" != x; then
- { echo "configure: error:
-The following requested languages were not found: ${missing_languages}" 1>&2; exit 1; }
+ { { echo "$as_me:$LINENO: error:
+The following requested languages could not be built: ${missing_languages}
+Recognised languages are: ${potential_languages}" >&5
+echo "$as_me: error:
+The following requested languages could not be built: ${missing_languages}
+Recognised languages are: ${potential_languages}" >&2;}
+ { (exit 1); exit 1; }; }
fi
if test "x$new_enable_languages" != "x$enable_languages"; then
ac_configure_args=`echo " $ac_configure_args" | sed -e 's/ --enable-languages=[^ ]*//' -e 's/$/ --enable-languages='"$enable_languages"/ `
fi
-# Remove the entries in $skipdirs and $noconfigdirs from $configdirs and
-# $target_configdirs.
+# Remove the entries in $skipdirs and $noconfigdirs from $configdirs,
+# $build_configdirs and $target_configdirs.
# If we have the source for $noconfigdirs entries, add them to $notsupp.
notsupp=""
for dir in . $skipdirs $noconfigdirs ; do
- dirname=`echo $dir | sed -e s/target-//g`
+ dirname=`echo $dir | sed -e s/target-//g -e s/build-//g`
if test $dir != . && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
if test -r $srcdir/$dirname/configure ; then
fi
fi
fi
+ if test $dir != . && echo " ${build_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ build_configdirs=`echo " ${build_configdirs} " | sed -e "s/ ${dir} / /"`
+ if test -r $srcdir/$dirname/configure ; then
+ if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ true
+ else
+ notsupp="$notsupp $dir"
+ fi
+ fi
+ fi
if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
if test -r $srcdir/$dirname/configure ; then
# Quietly strip out all directories which aren't configurable in this tree.
# This relies on all configurable subdirectories being autoconfiscated, which
# is now the case.
+build_configdirs_all="$build_configdirs"
+build_configdirs=
+for i in ${build_configdirs_all} ; do
+ j=`echo $i | sed -e s/build-//g`
+ if test -f ${srcdir}/$j/configure ; then
+ build_configdirs="${build_configdirs} $i"
+ fi
+done
+
configdirs_all="$configdirs"
configdirs=
for i in ${configdirs_all} ; do
configdirs="${configdirs} $i"
fi
done
+
target_configdirs_all="$target_configdirs"
target_configdirs=
for i in ${target_configdirs_all} ; do
- j=`echo $i | sed -e s/target-//g`
+ j=`echo $i | sed -e s/target-//g`
if test -f ${srcdir}/$j/configure ; then
target_configdirs="${target_configdirs} $i"
fi
appdirs=""
break
fi
- if echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ if echo " ${target_configdirs} " | grep " target-${dir} " >/dev/null 2>&1; then
appdirs=""
break
fi
copy_dirs=
+
+# Check whether --with-build-sysroot or --without-build-sysroot was given.
+if test "${with_build_sysroot+set}" = set; then
+ withval="$with_build_sysroot"
+ if test x"$withval" != x ; then
+ SYSROOT_CFLAGS_FOR_TARGET="--sysroot=$withval"
+ fi
+else
+ SYSROOT_CFLAGS_FOR_TARGET=
+fi;
+
+
# Handle --with-headers=XXX. If the value is not "yes", the contents of
# the named directory are copied to $(tooldir)/sys-include.
if test x"${with_headers}" != x && test x"${with_headers}" != xno ; then
extra_ranlibflags_for_target=
target_makefile_frag=/dev/null
case "${target}" in
- i[3456789]86-*-netware*)
- target_makefile_frag="config/mt-netware"
- ;;
- powerpc-*-netware*)
+ *-*-netware*)
target_makefile_frag="config/mt-netware"
;;
- *-*-linux*)
- target_makefile_frag="config/mt-linux"
+ *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
+ target_makefile_frag="config/mt-gnu"
;;
*-*-aix4.[3456789]* | *-*-aix[56789].*)
- # nm and ar from AIX 4.3 and above require -X32_64 flag to all ar and nm
+ # nm and ar from AIX 4.3 and above require -X32_64 flag to all ar and nm
# commands to handle both 32-bit and 64-bit objects. These flags are
# harmless if we're using GNU nm or ar.
extra_arflags_for_target=" -X32_64"
# This is done by determining whether or not the appropriate directory
# is available, and by checking whether or not specific configurations
# have requested that this magic not happen.
-#
-# The command line options always override the explicit settings in
+#
+# The command line options always override the explicit settings in
# configure.in, and the settings in configure.in override this magic.
#
-# If the default for a toolchain is to use GNU as and ld, and you don't
+# If the default for a toolchain is to use GNU as and ld, and you don't
# want to do that, then you should use the --without-gnu-as and
# --without-gnu-ld options for the configure script.
extra_host_args="$extra_host_args --with-newlib"
fi
-
# Default to using --with-stabs for certain targets.
if test x${with_stabs} = x ; then
case "${target}" in
# hpux11 in 64bit mode has libraries in a weird place. Arrange to find
# them automatically.
case "${host}" in
- hppa*64*-*-hpux11*)
+ hppa*64*-*-hpux11*)
extra_host_args="$extra_host_args -x-libraries=/usr/lib/pa20_64 -x-includes=/usr/X11R6/include"
;;
esac
tooldir='${exec_prefix}'/${target_alias}
build_tooldir=${tooldir}
-# Generate default definitions for YACC, M4, LEX. These are used if the
-# Makefile can't locate these programs in objdir.
+# Generate default definitions for YACC, M4, LEX and other programs that run
+# on the build machine. These are used if the Makefile can't locate these
+# programs in objdir.
MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing
-for ac_prog in 'bison -y' byacc yacc
+for ac_prog in bison
do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2612: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DEFAULT_YACC'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$DEFAULT_YACC"; then
- ac_cv_prog_DEFAULT_YACC="$DEFAULT_YACC" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DEFAULT_YACC="$ac_prog"
- break
- fi
- done
- IFS="$ac_save_ifs"
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CONFIGURED_BISON+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CONFIGURED_BISON"; then
+ ac_cv_prog_CONFIGURED_BISON="$CONFIGURED_BISON" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CONFIGURED_BISON="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-DEFAULT_YACC="$ac_cv_prog_DEFAULT_YACC"
-if test -n "$DEFAULT_YACC"; then
- echo "$ac_t""$DEFAULT_YACC" 1>&6
+CONFIGURED_BISON=$ac_cv_prog_CONFIGURED_BISON
+if test -n "$CONFIGURED_BISON"; then
+ echo "$as_me:$LINENO: result: $CONFIGURED_BISON" >&5
+echo "${ECHO_T}$CONFIGURED_BISON" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-test -n "$DEFAULT_YACC" && break
+ test -n "$CONFIGURED_BISON" && break
done
-test -n "$DEFAULT_YACC" || DEFAULT_YACC="$MISSING bison"
+test -n "$CONFIGURED_BISON" || CONFIGURED_BISON="$MISSING bison"
-for ac_prog in gm4 gnum4 m4
+for ac_prog in 'bison -y' byacc yacc
do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2647: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DEFAULT_M4'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$DEFAULT_M4"; then
- ac_cv_prog_DEFAULT_M4="$DEFAULT_M4" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DEFAULT_M4="$ac_prog"
- break
- fi
- done
- IFS="$ac_save_ifs"
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CONFIGURED_YACC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CONFIGURED_YACC"; then
+ ac_cv_prog_CONFIGURED_YACC="$CONFIGURED_YACC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CONFIGURED_YACC="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-DEFAULT_M4="$ac_cv_prog_DEFAULT_M4"
-if test -n "$DEFAULT_M4"; then
- echo "$ac_t""$DEFAULT_M4" 1>&6
+CONFIGURED_YACC=$ac_cv_prog_CONFIGURED_YACC
+if test -n "$CONFIGURED_YACC"; then
+ echo "$as_me:$LINENO: result: $CONFIGURED_YACC" >&5
+echo "${ECHO_T}$CONFIGURED_YACC" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-test -n "$DEFAULT_M4" && break
+ test -n "$CONFIGURED_YACC" && break
done
-test -n "$DEFAULT_M4" || DEFAULT_M4="$MISSING m4"
+test -n "$CONFIGURED_YACC" || CONFIGURED_YACC="$MISSING bison -y"
-for ac_prog in flex lex
+for ac_prog in gm4 gnum4 m4
do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2682: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DEFAULT_LEX'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$DEFAULT_LEX"; then
- ac_cv_prog_DEFAULT_LEX="$DEFAULT_LEX" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DEFAULT_LEX="$ac_prog"
- break
- fi
- done
- IFS="$ac_save_ifs"
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CONFIGURED_M4+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CONFIGURED_M4"; then
+ ac_cv_prog_CONFIGURED_M4="$CONFIGURED_M4" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CONFIGURED_M4="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-DEFAULT_LEX="$ac_cv_prog_DEFAULT_LEX"
-if test -n "$DEFAULT_LEX"; then
- echo "$ac_t""$DEFAULT_LEX" 1>&6
+CONFIGURED_M4=$ac_cv_prog_CONFIGURED_M4
+if test -n "$CONFIGURED_M4"; then
+ echo "$as_me:$LINENO: result: $CONFIGURED_M4" >&5
+echo "${ECHO_T}$CONFIGURED_M4" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-test -n "$DEFAULT_LEX" && break
+ test -n "$CONFIGURED_M4" && break
done
-test -n "$DEFAULT_LEX" || DEFAULT_LEX="$MISSING flex"
+test -n "$CONFIGURED_M4" || CONFIGURED_M4="$MISSING m4"
+for ac_prog in flex
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CONFIGURED_FLEX+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CONFIGURED_FLEX"; then
+ ac_cv_prog_CONFIGURED_FLEX="$CONFIGURED_FLEX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CONFIGURED_FLEX="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
-# Create a .gdbinit file which runs the one in srcdir
-# and tells GDB to look there for source files.
+fi
+fi
+CONFIGURED_FLEX=$ac_cv_prog_CONFIGURED_FLEX
+if test -n "$CONFIGURED_FLEX"; then
+ echo "$as_me:$LINENO: result: $CONFIGURED_FLEX" >&5
+echo "${ECHO_T}$CONFIGURED_FLEX" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
-if test -r ${srcdir}/.gdbinit ; then
+ test -n "$CONFIGURED_FLEX" && break
+done
+test -n "$CONFIGURED_FLEX" || CONFIGURED_FLEX="$MISSING flex"
+
+for ac_prog in flex lex
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CONFIGURED_LEX+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CONFIGURED_LEX"; then
+ ac_cv_prog_CONFIGURED_LEX="$CONFIGURED_LEX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CONFIGURED_LEX="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+CONFIGURED_LEX=$ac_cv_prog_CONFIGURED_LEX
+if test -n "$CONFIGURED_LEX"; then
+ echo "$as_me:$LINENO: result: $CONFIGURED_LEX" >&5
+echo "${ECHO_T}$CONFIGURED_LEX" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$CONFIGURED_LEX" && break
+done
+test -n "$CONFIGURED_LEX" || CONFIGURED_LEX="$MISSING flex"
+
+for ac_prog in makeinfo
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CONFIGURED_MAKEINFO+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CONFIGURED_MAKEINFO"; then
+ ac_cv_prog_CONFIGURED_MAKEINFO="$CONFIGURED_MAKEINFO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CONFIGURED_MAKEINFO="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+CONFIGURED_MAKEINFO=$ac_cv_prog_CONFIGURED_MAKEINFO
+if test -n "$CONFIGURED_MAKEINFO"; then
+ echo "$as_me:$LINENO: result: $CONFIGURED_MAKEINFO" >&5
+echo "${ECHO_T}$CONFIGURED_MAKEINFO" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$CONFIGURED_MAKEINFO" && break
+done
+test -n "$CONFIGURED_MAKEINFO" || CONFIGURED_MAKEINFO="$MISSING makeinfo"
+
+
+# Create a .gdbinit file which runs the one in srcdir
+# and tells GDB to look there for source files.
+
+if test -r ${srcdir}/.gdbinit ; then
case ${srcdir} in
.) ;;
*) cat > ./.gdbinit <<EOF
if test -s conftest || test -s conftest.exe ; then
we_are_ok=yes
fi
-fi
+fi
case $we_are_ok in
no)
echo 1>&2 "*** The command '${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c' failed."
;;
esac
-# If --enable-shared was set, we must set LD_LIBRARY_PATH so that the
-# binutils tools will find libbfd.so.
-case "${enable_shared}" in
- no | "") SET_LIB_PATH= ;;
- *) SET_LIB_PATH="\$(REALLY_SET_LIB_PATH)" ;;
-esac
-
case "${host}" in
*-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
+ *-*-darwin* | *-*-rhapsody* ) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
*) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
esac
# Record target_configdirs and the configure arguments for target and
# build configuration in Makefile.
target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
-
-# This is the final value for target_configdirs. configdirs already
-# has its final value, as does build_modules. It's time to create some
-# lists of valid targets.
-
-all_build_modules=
-configure_build_modules=
-for module in ${build_modules} ; do
- all_build_modules=all-build-${module}
- configure_build_modules=configure-build-${module}
-done
+build_configdirs=`echo "${build_configdirs}" | sed -e 's/build-//g'`
# Determine whether gdb needs tk/tcl or not.
# Use 'maybe' since enable_gdbtk might be true even if tk isn't available
# leave out the maybe dependencies when enable_gdbtk is false. I'm not
# 100% sure that that's safe though.
-gdb_tk="maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-tix maybe-all-libgui"
+gdb_tk="maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-libgui"
case "$enable_gdbtk" in
no)
GDB_TK="" ;;
;;
esac
-# Create the 'maybe dependencies'. This uses a temporary file.
+# Strip out unwanted targets.
# While at that, we remove Makefiles if we were started for recursive
# configuration, so that the top-level Makefile reconfigures them,
# like we used to do when configure itself was recursive.
-rm -f maybedep.tmp
-echo '# maybedep.tmp' > maybedep.tmp
-# Make-targets which may need maybe dependencies.
-mts="configure all install check clean distclean dvi info install-info"
-mts="${mts} installcheck mostlyclean maintainer-clean TAGS"
+# Loop over modules. $extrasub must be used with care, limiting as
+# much as possible the usage of range addresses. That's because autoconf
+# splits the sed script to overcome limits in the number of commands,
+# and relying on carefully-timed sed passes may turn out to be very hard
+# to maintain later. In this particular case, you just have to be careful
+# not to nest @if/@endif pairs, because configure will not warn you at all.
+
+# Check whether --enable-bootstrap or --disable-bootstrap was given.
+if test "${enable_bootstrap+set}" = set; then
+ enableval="$enable_bootstrap"
+
+else
+ enable_bootstrap=default
+fi;
+
+# Issue errors and warnings for invalid/strange bootstrap combinations.
+case "$configdirs" in
+ *gcc*) have_compiler=yes ;;
+ *) have_compiler=no ;;
+esac
+
+case "$have_compiler:$host:$target:$enable_bootstrap" in
+ *:*:*:no) ;;
+
+ # Default behavior. (We'll) enable bootstrap if we have a compiler
+ # and we are in a native configuration.
+ yes:$build:$build:default)
+ # This will become 'yes'
+ enable_bootstrap=no ;;
+
+ *:*:*:default)
+ enable_bootstrap=no ;;
+
+ # We have a compiler and we are in a native configuration, bootstrap is ok
+ yes:$build:$build:yes | yes:$build:$build:lean)
+ ;;
+
+ # Other configurations, but we have a compiler. Assume the user knows
+ # what he's doing.
+ yes:*:*:yes | yes:*:*:lean)
+ { echo "$as_me:$LINENO: WARNING: trying to bootstrap a cross compiler" >&5
+echo "$as_me: WARNING: trying to bootstrap a cross compiler" >&2;}
+ ;;
+
+ # No compiler: if they passed --enable-bootstrap explicitly, fail
+ no:*:*:yes | no:*:*:lean)
+ { { echo "$as_me:$LINENO: error: cannot bootstrap without a compiler" >&5
+echo "$as_me: error: cannot bootstrap without a compiler" >&2;}
+ { (exit 1); exit 1; }; } ;;
+
+ # Fail if wrong command line
+ *)
+ { { echo "$as_me:$LINENO: error: invalid option for --enable-bootstrap" >&5
+echo "$as_me: error: invalid option for --enable-bootstrap" >&2;}
+ { (exit 1); exit 1; }; }
+ ;;
+esac
+
+# Adjust the toplevel makefile according to whether bootstrap was selected.
+case "$enable_bootstrap" in
+ yes)
+ bootstrap_lean='#'
+ default_target=bootstrap
+ bootstrap_suffix=bootstrap ;;
+ lean)
+ bootstrap_lean=''
+ default_target=bootstrap
+ bootstrap_suffix=bootstrap ;;
+ no)
+ default_target=all
+ bootstrap_suffix=no-bootstrap ;;
+esac
+
-# Loop over modules and make-targets.
-for module in ${build_modules} ; do
+
+for module in ${build_configdirs} ; do
if test -z "${no_recursion}" \
&& test -f ${build_subdir}/${module}/Makefile; then
echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure"
rm -f ${build_subdir}/${module}/Makefile
fi
- for mt in ${mts} ; do
- case ${mt} in
- install) ;; # No installing build modules.
- *) echo "maybe-${mt}-build-${module}: ${mt}-build-${module}" >> maybedep.tmp ;;
- esac
- done
+ extrasub="$extrasub
+/^@if build-$module\$/d
+/^@endif build-$module\$/d
+/^@if build-$module-$bootstrap_suffix\$/d
+/^@endif build-$module-$bootstrap_suffix\$/d"
done
for module in ${configdirs} ; do
if test -z "${no_recursion}" \
echo 1>&2 "*** removing ${module}/Makefile to force reconfigure"
rm -f ${module}/Makefile
fi
- for mt in ${mts} ; do
- echo "maybe-${mt}-${module}: ${mt}-${module}" >> maybedep.tmp
- done
+ extrasub="$extrasub
+/^@if $module\$/d
+/^@endif $module\$/d
+/^@if $module-$bootstrap_suffix\$/d
+/^@endif $module-$bootstrap_suffix\$/d"
done
for module in ${target_configdirs} ; do
if test -z "${no_recursion}" \
echo 1>&2 "*** removing ${target_subdir}/${module}/Makefile to force reconfigure"
rm -f ${target_subdir}/${module}/Makefile
fi
- for mt in ${mts} ; do
- echo "maybe-${mt}-target-${module}: ${mt}-target-${module}" >> maybedep.tmp
- done
+ extrasub="$extrasub
+/^@if target-$module\$/d
+/^@endif target-$module\$/d
+/^@if target-$module-$bootstrap_suffix\$/d
+/^@endif target-$module-$bootstrap_suffix\$/d"
done
-maybe_dependencies=maybedep.tmp
+extrasub="$extrasub
+/^@if /,/^@endif /d"
# Create the serialization dependencies. This uses a temporary file.
# Check whether --enable-serial-configure or --disable-serial-configure was given.
if test "${enable_serial_configure+set}" = set; then
enableval="$enable_serial_configure"
- :
-fi
+fi;
case ${enable_serial_configure} in
yes)
s,\$,$$,g
EOF_SED
sed -f conftestsed <<EOF_SED > conftestsed.out
- ${ac_configure_args}
+ ${ac_configure_args}
EOF_SED
baseargs=`cat conftestsed.out`
rm -f conftestsed conftestsed.out
# --program-suffix have been applied to it. Autoconf has already
# doubled dollar signs and backslashes in program_transform_name; we want
# the backslashes un-doubled, and then the entire thing wrapped in single
-# quotes, because this will be expanded first by make and then by the shell.
+# quotes, because this will be expanded first by make and then by the shell.
# Also, because we want to override the logic in subdir configure scripts to
# choose program_transform_name, replace any s,x,x, with s,y,y,.
sed -e "s,\\\\\\\\,\\\\,g; s,','\\\\'',g; s/s,x,x,/s,y,y,/" <<EOF_SED > conftestsed.out
# For the build-side libraries, we just need to pretend we're native,
# and not use the same cache file. Multilibs are neither needed nor
# desired.
-build_configargs="--cache-file=../config.cache --build=${build_alias} --host=${build_alias} ${baseargs}"
+build_configargs="--cache-file=../config.cache --build=${build_alias} --host=${build_alias} --target=${target_alias} ${baseargs}"
# For host modules, accept cache file option, or specification as blank.
case "${cache_file}" in
# fixed in future. It's still worthwhile to use a cache file for each
# directory. I think.
-# Pass the appropriate --host, --build, and --cache-file arguments.
-target_configargs="--cache-file=./config.cache --host=${target_alias} --build=${build_alias} ${target_configargs}"
-
-# provide a proper gxx_include_dir.
-# Note, if you change the default, make sure to fix both here and in
-# the gcc and libstdc++-v3 subdirectories.
-# Check whether --with-gxx-include-dir or --without-gxx-include-dir was given.
-case "${with_gxx_include_dir}" in
- yes)
- { echo "configure: error: --with-gxx-include-dir=[dir] requires a directory" 1>&2; exit 1; }
- ;;
- no | "")
- case "${enable_version_specific_runtime_libs}" in
- yes) gxx_include_dir='${libsubdir}/include/c++' ;;
- *)
- . ${srcdir}/config.if
- gxx_include_dir='${prefix}/include/'${libstdcxx_incdir} ;;
- esac ;;
- *) gxx_include_dir=${with_gxx_include_dir} ;;
-esac
+# Pass the appropriate --build, --host, --target and --cache-file arguments.
+# We need to pass --target, as newer autoconf's requires consistency
+# for target_alias and gcc doesn't manage it consistently.
+target_configargs="--cache-file=./config.cache --build=${build_alias} --host=${target_alias} --target=${target_alias} ${target_configargs}"
FLAGS_FOR_TARGET=
case " $target_configdirs " in
# to it. This is right: we don't want to search that directory
# for binaries, but we want the header files in there, so add
# them explicitly.
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -isystem $$r/gcc/include'
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -isystem $$r/$(HOST_SUBDIR)/gcc/include'
# Someone might think of using the pre-installed headers on
# Canadian crosses, in case the installed compiler is not fully
if test "x${use_gnu_ld}" = x &&
echo " ${configdirs} " | grep " ld " > /dev/null ; then
# Arrange for us to find uninstalled linker scripts.
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/ld'
-fi
-
-if test "x${CC_FOR_TARGET+set}" = xset; then
- :
-elif test -d ${srcdir}/gcc; then
- CC_FOR_TARGET='$$r/gcc/xgcc -B$$r/gcc/'
-elif test "$host" = "$target"; then
- CC_FOR_TARGET='$(CC)'
-else
- CC_FOR_TARGET=`echo gcc | sed "${program_transform_name}"`
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(HOST_SUBDIR)/ld'
fi
-CC_FOR_TARGET=$CC_FOR_TARGET' $(FLAGS_FOR_TARGET)'
-
-if test "x${GCJ_FOR_TARGET+set}" = xset; then
- :
-elif test -d ${srcdir}/gcc; then
- GCJ_FOR_TARGET='$$r/gcc/gcj -B$$r/gcc/'
-elif test "$host" = "$target"; then
- GCJ_FOR_TARGET='gcj'
-else
- GCJ_FOR_TARGET=`echo gcj | sed "${program_transform_name}"`
-fi
-GCJ_FOR_TARGET=$GCJ_FOR_TARGET' $(FLAGS_FOR_TARGET)'
-
-# Don't use libstdc++-v3's flags to configure/build itself.
-libstdcxx_flags='`test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
-raw_libstdcxx_flags='-L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
-
-if test "x${CXX_FOR_TARGET+set}" = xset; then
- if test "x${RAW_CXX_FOR_TARGET+set}" != xset; then
- RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
- fi
-elif test -d ${srcdir}/gcc; then
- # We add -shared-libgcc to CXX_FOR_TARGET whenever we use xgcc instead
- # of g++ for linking C++ or Java, because g++ has -shared-libgcc by
- # default whereas gcc does not.
- # RAW_CXX_FOR_TARGET is for linking C++ or java; CXX_FOR_TARGET is for
- # all other cases.
- CXX_FOR_TARGET='$$r/gcc/g++ -B$$r/gcc/ -nostdinc++ '$libstdcxx_flags
- RAW_CXX_FOR_TARGET='$$r/gcc/xgcc -shared-libgcc -B$$r/gcc/ -nostdinc++ '$raw_libstdcxx_flags
-elif test "$host" = "$target"; then
- CXX_FOR_TARGET='$(CXX)'
- RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
-else
- CXX_FOR_TARGET=`echo c++ | sed "${program_transform_name}"`
- RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
-fi
-CXX_FOR_TARGET=$CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)'
-RAW_CXX_FOR_TARGET=$RAW_CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)'
-
-qCXX_FOR_TARGET=`echo "$CXX_FOR_TARGET" | sed 's,[&%],\\\&,g'`
-qRAW_CXX_FOR_TARGET=`echo "$RAW_CXX_FOR_TARGET" | sed 's,[&%],\\\&,g'`
-
-# We want to defer the evaluation of `cmd`s and shell variables in
-# CXX_FOR_TARGET when recursing in the top-level Makefile, such as for
-# bootstrap. We'll enclose CXX_FOR_TARGET_FOR_RECURSIVE_MAKE in single
-# quotes, but we still have to duplicate `$'s so that shell variables
-# can be expanded by the nested make as shell variables, not as make
-# macros.
-qqCXX_FOR_TARGET=`echo "$qCXX_FOR_TARGET" | sed -e 's,[$][$],$$$$,g'`
-qqRAW_CXX_FOR_TARGET=`echo "$qRAW_CXX_FOR_TARGET" | sed -e 's,[$][$],$$$$,g'`
-
-# Wrap CC_FOR_TARGET and friends, for certain types of builds.
-CC_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${CC_FOR_TARGET}"
-GCJ_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${GCJ_FOR_TARGET}"
-CXX_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${qCXX_FOR_TARGET}"
-RAW_CXX_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${qRAW_CXX_FOR_TARGET}"
-CXX_FOR_TARGET_FOR_RECURSIVE_MAKE="\$(STAGE_CC_WRAPPER) ${qqCXX_FOR_TARGET}"
-RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE="\$(STAGE_CC_WRAPPER) ${qqRAW_CXX_FOR_TARGET}"
# Makefile fragments.
-host_makefile_frag=${srcdir}/${host_makefile_frag}
-target_makefile_frag=${srcdir}/${target_makefile_frag}
-alphaieee_frag=${srcdir}/${alphaieee_frag}
-ospace_frag=${srcdir}/${ospace_frag}
+for frag in host_makefile_frag target_makefile_frag alphaieee_frag ospace_frag;
+do
+ eval fragval=\$$frag
+ if test $fragval != /dev/null; then
+ eval $frag=${srcdir}/$fragval
+ fi
+done
-
-
-
-
-
# Build module lists & subconfigure args.
-
# Host module lists & subconfigure args.
-
-
-
-
# Host tools.
ncn_tool_prefix=
test -n "$host_alias" && ncn_tool_prefix=$host_alias-
ncn_target_tool_prefix=
test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3245: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+ for ncn_progname in ar; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AR+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$AR"; then
ac_cv_prog_AR="$AR" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AR="${ncn_tool_prefix}ar"
- break
- fi
- done
- IFS="$ac_save_ifs"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AR="${ncn_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-AR="$ac_cv_prog_AR"
+AR=$ac_cv_prog_AR
if test -n "$AR"; then
- echo "$ac_t""$AR" 1>&6
+ echo "$as_me:$LINENO: result: $AR" >&5
+echo "${ECHO_T}$AR" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-fi
-if test -z "$ac_cv_prog_AR" ; then
- if test $build = $host ; then
- ncn_cv_AR=$AR
- # Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3278: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$ncn_cv_AR"; then
- ac_cv_prog_ncn_cv_AR="$ncn_cv_AR" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_AR="ar"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_AR" && ac_cv_prog_ncn_cv_AR="ar"
+ fi
+ if test -z "$ac_cv_prog_AR" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AR+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AR="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-ncn_cv_AR="$ac_cv_prog_ncn_cv_AR"
-if test -n "$ncn_cv_AR"; then
- echo "$ac_t""$ncn_cv_AR" 1>&6
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ echo "$as_me:$LINENO: result: $AR" >&5
+echo "${ECHO_T}$AR" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
- AR=$ncn_cv_AR
+
+ fi
+ test -n "$ac_cv_prog_AR" && break
+done
+
+if test -z "$ac_cv_prog_AR" ; then
+ set dummy ar
+ if test $build = $host ; then
+ AR="$2"
else
- AR="${ncn_tool_prefix}ar"
+ AR="${ncn_tool_prefix}$2"
fi
-else
- AR="$ac_cv_prog_AR"
fi
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3317: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+ for ncn_progname in as; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AS+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$AS"; then
ac_cv_prog_AS="$AS" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS="${ncn_tool_prefix}as"
- break
- fi
- done
- IFS="$ac_save_ifs"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AS="${ncn_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-AS="$ac_cv_prog_AS"
+AS=$ac_cv_prog_AS
if test -n "$AS"; then
- echo "$ac_t""$AS" 1>&6
+ echo "$as_me:$LINENO: result: $AS" >&5
+echo "${ECHO_T}$AS" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-fi
-if test -z "$ac_cv_prog_AS" ; then
- if test $build = $host ; then
- ncn_cv_AS=$AS
- # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3350: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$ncn_cv_AS"; then
- ac_cv_prog_ncn_cv_AS="$ncn_cv_AS" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_AS="as"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_AS" && ac_cv_prog_ncn_cv_AS="as"
+ fi
+ if test -z "$ac_cv_prog_AS" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AS+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AS"; then
+ ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AS="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-ncn_cv_AS="$ac_cv_prog_ncn_cv_AS"
-if test -n "$ncn_cv_AS"; then
- echo "$ac_t""$ncn_cv_AS" 1>&6
+AS=$ac_cv_prog_AS
+if test -n "$AS"; then
+ echo "$as_me:$LINENO: result: $AS" >&5
+echo "${ECHO_T}$AS" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
- AS=$ncn_cv_AS
+
+ fi
+ test -n "$ac_cv_prog_AS" && break
+done
+
+if test -z "$ac_cv_prog_AS" ; then
+ set dummy as
+ if test $build = $host ; then
+ AS="$2"
else
- AS="${ncn_tool_prefix}as"
+ AS="${ncn_tool_prefix}$2"
fi
-else
- AS="$ac_cv_prog_AS"
fi
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3389: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+ for ncn_progname in dlltool; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_DLLTOOL+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$DLLTOOL"; then
ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL="${ncn_tool_prefix}dlltool"
- break
- fi
- done
- IFS="$ac_save_ifs"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DLLTOOL="${ncn_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
+DLLTOOL=$ac_cv_prog_DLLTOOL
if test -n "$DLLTOOL"; then
- echo "$ac_t""$DLLTOOL" 1>&6
+ echo "$as_me:$LINENO: result: $DLLTOOL" >&5
+echo "${ECHO_T}$DLLTOOL" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-fi
-if test -z "$ac_cv_prog_DLLTOOL" ; then
- if test $build = $host ; then
- ncn_cv_DLLTOOL=$DLLTOOL
- # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3422: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$ncn_cv_DLLTOOL"; then
- ac_cv_prog_ncn_cv_DLLTOOL="$ncn_cv_DLLTOOL" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_DLLTOOL="dlltool"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_DLLTOOL" && ac_cv_prog_ncn_cv_DLLTOOL="dlltool"
+ fi
+ if test -z "$ac_cv_prog_DLLTOOL" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_DLLTOOL+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DLLTOOL="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-ncn_cv_DLLTOOL="$ac_cv_prog_ncn_cv_DLLTOOL"
-if test -n "$ncn_cv_DLLTOOL"; then
- echo "$ac_t""$ncn_cv_DLLTOOL" 1>&6
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+ echo "$as_me:$LINENO: result: $DLLTOOL" >&5
+echo "${ECHO_T}$DLLTOOL" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
- DLLTOOL=$ncn_cv_DLLTOOL
+
+ fi
+ test -n "$ac_cv_prog_DLLTOOL" && break
+done
+
+if test -z "$ac_cv_prog_DLLTOOL" ; then
+ set dummy dlltool
+ if test $build = $host ; then
+ DLLTOOL="$2"
else
- DLLTOOL="${ncn_tool_prefix}dlltool"
+ DLLTOOL="${ncn_tool_prefix}$2"
fi
-else
- DLLTOOL="$ac_cv_prog_DLLTOOL"
fi
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}ld; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3461: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+ for ncn_progname in ld; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_LD+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$LD"; then
ac_cv_prog_LD="$LD" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_LD="${ncn_tool_prefix}ld"
- break
- fi
- done
- IFS="$ac_save_ifs"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_LD="${ncn_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-LD="$ac_cv_prog_LD"
+LD=$ac_cv_prog_LD
if test -n "$LD"; then
- echo "$ac_t""$LD" 1>&6
+ echo "$as_me:$LINENO: result: $LD" >&5
+echo "${ECHO_T}$LD" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-fi
-if test -z "$ac_cv_prog_LD" ; then
- if test $build = $host ; then
- ncn_cv_LD=$LD
- # Extract the first word of "ld", so it can be a program name with args.
-set dummy ld; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3494: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$ncn_cv_LD"; then
- ac_cv_prog_ncn_cv_LD="$ncn_cv_LD" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_LD="ld"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_LD" && ac_cv_prog_ncn_cv_LD="ld"
+ fi
+ if test -z "$ac_cv_prog_LD" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_LD+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$LD"; then
+ ac_cv_prog_LD="$LD" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_LD="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-ncn_cv_LD="$ac_cv_prog_ncn_cv_LD"
-if test -n "$ncn_cv_LD"; then
- echo "$ac_t""$ncn_cv_LD" 1>&6
+LD=$ac_cv_prog_LD
+if test -n "$LD"; then
+ echo "$as_me:$LINENO: result: $LD" >&5
+echo "${ECHO_T}$LD" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
- LD=$ncn_cv_LD
+
+ fi
+ test -n "$ac_cv_prog_LD" && break
+done
+
+if test -z "$ac_cv_prog_LD" ; then
+ set dummy ld
+ if test $build = $host ; then
+ LD="$2"
else
- LD="${ncn_tool_prefix}ld"
+ LD="${ncn_tool_prefix}$2"
fi
-else
- LD="$ac_cv_prog_LD"
fi
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}nm; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3533: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+ for ncn_progname in nm; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_NM+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$NM"; then
ac_cv_prog_NM="$NM" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_NM="${ncn_tool_prefix}nm"
- break
- fi
- done
- IFS="$ac_save_ifs"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_NM="${ncn_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-NM="$ac_cv_prog_NM"
+NM=$ac_cv_prog_NM
if test -n "$NM"; then
- echo "$ac_t""$NM" 1>&6
+ echo "$as_me:$LINENO: result: $NM" >&5
+echo "${ECHO_T}$NM" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-fi
-if test -z "$ac_cv_prog_NM" ; then
- if test $build = $host ; then
- ncn_cv_NM=$NM
- # Extract the first word of "nm", so it can be a program name with args.
-set dummy nm; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3566: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$ncn_cv_NM"; then
- ac_cv_prog_ncn_cv_NM="$ncn_cv_NM" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_NM="nm"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_NM" && ac_cv_prog_ncn_cv_NM="nm"
+ fi
+ if test -z "$ac_cv_prog_NM" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_NM+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$NM"; then
+ ac_cv_prog_NM="$NM" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_NM="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-ncn_cv_NM="$ac_cv_prog_ncn_cv_NM"
-if test -n "$ncn_cv_NM"; then
- echo "$ac_t""$ncn_cv_NM" 1>&6
+NM=$ac_cv_prog_NM
+if test -n "$NM"; then
+ echo "$as_me:$LINENO: result: $NM" >&5
+echo "${ECHO_T}$NM" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
- NM=$ncn_cv_NM
- else
- NM="${ncn_tool_prefix}nm"
+
+ fi
+ test -n "$ac_cv_prog_NM" && break
+done
+
+if test -z "$ac_cv_prog_NM" ; then
+ set dummy nm
+ if test $build = $host ; then
+ NM="$2"
+ else
+ NM="${ncn_tool_prefix}$2"
fi
-else
- NM="$ac_cv_prog_NM"
fi
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3605: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+ for ncn_progname in ranlib; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_RANLIB+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$RANLIB"; then
ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_RANLIB="${ncn_tool_prefix}ranlib"
- break
- fi
- done
- IFS="$ac_save_ifs"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_RANLIB="${ncn_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-RANLIB="$ac_cv_prog_RANLIB"
+RANLIB=$ac_cv_prog_RANLIB
if test -n "$RANLIB"; then
- echo "$ac_t""$RANLIB" 1>&6
+ echo "$as_me:$LINENO: result: $RANLIB" >&5
+echo "${ECHO_T}$RANLIB" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-fi
-if test -z "$ac_cv_prog_RANLIB" ; then
- if test $build = $host ; then
- ncn_cv_RANLIB=$RANLIB
- # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3638: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$ncn_cv_RANLIB"; then
- ac_cv_prog_ncn_cv_RANLIB="$ncn_cv_RANLIB" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_RANLIB="ranlib"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_RANLIB" && ac_cv_prog_ncn_cv_RANLIB=":"
+ fi
+ if test -z "$ac_cv_prog_RANLIB" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_RANLIB+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_RANLIB="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-ncn_cv_RANLIB="$ac_cv_prog_ncn_cv_RANLIB"
-if test -n "$ncn_cv_RANLIB"; then
- echo "$ac_t""$ncn_cv_RANLIB" 1>&6
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+ echo "$as_me:$LINENO: result: $RANLIB" >&5
+echo "${ECHO_T}$RANLIB" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
- RANLIB=$ncn_cv_RANLIB
- else
- RANLIB=":"
+
fi
-else
- RANLIB="$ac_cv_prog_RANLIB"
+ test -n "$ac_cv_prog_RANLIB" && break
+done
+
+if test -z "$ac_cv_prog_RANLIB" ; then
+ RANLIB=":"
fi
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}windres; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3677: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+ for ncn_progname in windres; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_WINDRES+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$WINDRES"; then
ac_cv_prog_WINDRES="$WINDRES" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_WINDRES="${ncn_tool_prefix}windres"
- break
- fi
- done
- IFS="$ac_save_ifs"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_WINDRES="${ncn_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-WINDRES="$ac_cv_prog_WINDRES"
+WINDRES=$ac_cv_prog_WINDRES
if test -n "$WINDRES"; then
- echo "$ac_t""$WINDRES" 1>&6
+ echo "$as_me:$LINENO: result: $WINDRES" >&5
+echo "${ECHO_T}$WINDRES" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-fi
-if test -z "$ac_cv_prog_WINDRES" ; then
- if test $build = $host ; then
- ncn_cv_WINDRES=$WINDRES
- # Extract the first word of "windres", so it can be a program name with args.
-set dummy windres; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3710: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$ncn_cv_WINDRES"; then
- ac_cv_prog_ncn_cv_WINDRES="$ncn_cv_WINDRES" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_WINDRES="windres"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_WINDRES" && ac_cv_prog_ncn_cv_WINDRES="windres"
+ fi
+ if test -z "$ac_cv_prog_WINDRES" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_WINDRES+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$WINDRES"; then
+ ac_cv_prog_WINDRES="$WINDRES" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_WINDRES="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-ncn_cv_WINDRES="$ac_cv_prog_ncn_cv_WINDRES"
-if test -n "$ncn_cv_WINDRES"; then
- echo "$ac_t""$ncn_cv_WINDRES" 1>&6
+WINDRES=$ac_cv_prog_WINDRES
+if test -n "$WINDRES"; then
+ echo "$as_me:$LINENO: result: $WINDRES" >&5
+echo "${ECHO_T}$WINDRES" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
- WINDRES=$ncn_cv_WINDRES
+
+ fi
+ test -n "$ac_cv_prog_WINDRES" && break
+done
+
+if test -z "$ac_cv_prog_WINDRES" ; then
+ set dummy windres
+ if test $build = $host ; then
+ WINDRES="$2"
else
- WINDRES="${ncn_tool_prefix}windres"
+ WINDRES="${ncn_tool_prefix}$2"
fi
-else
- WINDRES="$ac_cv_prog_WINDRES"
fi
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}objcopy; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3749: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+ for ncn_progname in objcopy; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_OBJCOPY+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$OBJCOPY"; then
ac_cv_prog_OBJCOPY="$OBJCOPY" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_OBJCOPY="${ncn_tool_prefix}objcopy"
- break
- fi
- done
- IFS="$ac_save_ifs"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_OBJCOPY="${ncn_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-OBJCOPY="$ac_cv_prog_OBJCOPY"
+OBJCOPY=$ac_cv_prog_OBJCOPY
if test -n "$OBJCOPY"; then
- echo "$ac_t""$OBJCOPY" 1>&6
+ echo "$as_me:$LINENO: result: $OBJCOPY" >&5
+echo "${ECHO_T}$OBJCOPY" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-fi
-if test -z "$ac_cv_prog_OBJCOPY" ; then
- if test $build = $host ; then
- ncn_cv_OBJCOPY=$OBJCOPY
- # Extract the first word of "objcopy", so it can be a program name with args.
-set dummy objcopy; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3782: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$ncn_cv_OBJCOPY"; then
- ac_cv_prog_ncn_cv_OBJCOPY="$ncn_cv_OBJCOPY" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_OBJCOPY="objcopy"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_OBJCOPY" && ac_cv_prog_ncn_cv_OBJCOPY="objcopy"
+ fi
+ if test -z "$ac_cv_prog_OBJCOPY" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_OBJCOPY+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$OBJCOPY"; then
+ ac_cv_prog_OBJCOPY="$OBJCOPY" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_OBJCOPY="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-ncn_cv_OBJCOPY="$ac_cv_prog_ncn_cv_OBJCOPY"
-if test -n "$ncn_cv_OBJCOPY"; then
- echo "$ac_t""$ncn_cv_OBJCOPY" 1>&6
+OBJCOPY=$ac_cv_prog_OBJCOPY
+if test -n "$OBJCOPY"; then
+ echo "$as_me:$LINENO: result: $OBJCOPY" >&5
+echo "${ECHO_T}$OBJCOPY" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
- OBJCOPY=$ncn_cv_OBJCOPY
+
+ fi
+ test -n "$ac_cv_prog_OBJCOPY" && break
+done
+
+if test -z "$ac_cv_prog_OBJCOPY" ; then
+ set dummy objcopy
+ if test $build = $host ; then
+ OBJCOPY="$2"
else
- OBJCOPY="${ncn_tool_prefix}objcopy"
+ OBJCOPY="${ncn_tool_prefix}$2"
fi
-else
- OBJCOPY="$ac_cv_prog_OBJCOPY"
fi
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}objdump; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3821: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+ for ncn_progname in objdump; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_OBJDUMP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$OBJDUMP"; then
ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_OBJDUMP="${ncn_tool_prefix}objdump"
- break
- fi
- done
- IFS="$ac_save_ifs"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_OBJDUMP="${ncn_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-OBJDUMP="$ac_cv_prog_OBJDUMP"
+OBJDUMP=$ac_cv_prog_OBJDUMP
if test -n "$OBJDUMP"; then
- echo "$ac_t""$OBJDUMP" 1>&6
+ echo "$as_me:$LINENO: result: $OBJDUMP" >&5
+echo "${ECHO_T}$OBJDUMP" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
+ fi
+ if test -z "$ac_cv_prog_OBJDUMP" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_OBJDUMP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$OBJDUMP"; then
+ ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_OBJDUMP="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+ echo "$as_me:$LINENO: result: $OBJDUMP" >&5
+echo "${ECHO_T}$OBJDUMP" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_OBJDUMP" && break
+done
+
if test -z "$ac_cv_prog_OBJDUMP" ; then
+ set dummy objdump
if test $build = $host ; then
- ncn_cv_OBJDUMP=$OBJDUMP
- # Extract the first word of "objdump", so it can be a program name with args.
-set dummy objdump; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3854: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$ncn_cv_OBJDUMP"; then
- ac_cv_prog_ncn_cv_OBJDUMP="$ncn_cv_OBJDUMP" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_OBJDUMP="objdump"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_OBJDUMP" && ac_cv_prog_ncn_cv_OBJDUMP="objdump"
+ OBJDUMP="$2"
+ else
+ OBJDUMP="${ncn_tool_prefix}$2"
+ fi
+fi
+
+
+
+
+
+
+
+# Target tools. Do the tests using the names they may have passed in
+# the environment, then move it to CONFIGURED_*_FOR_TARGET.
+ for ncn_progname in ar; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AR_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AR_FOR_TARGET"; then
+ ac_cv_prog_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AR_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-ncn_cv_OBJDUMP="$ac_cv_prog_ncn_cv_OBJDUMP"
-if test -n "$ncn_cv_OBJDUMP"; then
- echo "$ac_t""$ncn_cv_OBJDUMP" 1>&6
+AR_FOR_TARGET=$ac_cv_prog_AR_FOR_TARGET
+if test -n "$AR_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $AR_FOR_TARGET" >&5
+echo "${ECHO_T}$AR_FOR_TARGET" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
- OBJDUMP=$ncn_cv_OBJDUMP
- else
- OBJDUMP="${ncn_tool_prefix}objdump"
+
fi
+ if test -z "$ac_cv_prog_AR_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AR_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AR_FOR_TARGET"; then
+ ac_cv_prog_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AR_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+AR_FOR_TARGET=$ac_cv_prog_AR_FOR_TARGET
+if test -n "$AR_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $AR_FOR_TARGET" >&5
+echo "${ECHO_T}$AR_FOR_TARGET" >&6
else
- OBJDUMP="$ac_cv_prog_OBJDUMP"
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
+ fi
+ test -n "$ac_cv_prog_AR_FOR_TARGET" && break
+done
+if test -z "$ac_cv_prog_AR_FOR_TARGET" ; then
+ set dummy ar
+ if test $build = $target ; then
+ AR_FOR_TARGET="$2"
+ else
+ AR_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+fi
+ for ncn_progname in as; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AS_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AS_FOR_TARGET"; then
+ ac_cv_prog_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AS_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+fi
+fi
+AS_FOR_TARGET=$ac_cv_prog_AS_FOR_TARGET
+if test -n "$AS_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $AS_FOR_TARGET" >&5
+echo "${ECHO_T}$AS_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+ fi
+ if test -z "$ac_cv_prog_AS_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AS_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AS_FOR_TARGET"; then
+ ac_cv_prog_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AS_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+fi
+fi
+AS_FOR_TARGET=$ac_cv_prog_AS_FOR_TARGET
+if test -n "$AS_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $AS_FOR_TARGET" >&5
+echo "${ECHO_T}$AS_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+ fi
+ test -n "$ac_cv_prog_AS_FOR_TARGET" && break
+done
+if test -z "$ac_cv_prog_AS_FOR_TARGET" ; then
+ set dummy as
+ if test $build = $target ; then
+ AS_FOR_TARGET="$2"
+ else
+ AS_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+fi
-
-# Target tools.
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3903: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+ for ncn_progname in cc gcc; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$CONFIGURED_AR_FOR_TARGET"; then
- ac_cv_prog_CONFIGURED_AR_FOR_TARGET="$CONFIGURED_AR_FOR_TARGET" # Let the user override the test.
+ if test -n "$CC_FOR_TARGET"; then
+ ac_cv_prog_CC_FOR_TARGET="$CC_FOR_TARGET" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_AR_FOR_TARGET="${ncn_target_tool_prefix}ar"
- break
- fi
- done
- IFS="$ac_save_ifs"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-CONFIGURED_AR_FOR_TARGET="$ac_cv_prog_CONFIGURED_AR_FOR_TARGET"
-if test -n "$CONFIGURED_AR_FOR_TARGET"; then
- echo "$ac_t""$CONFIGURED_AR_FOR_TARGET" 1>&6
+CC_FOR_TARGET=$ac_cv_prog_CC_FOR_TARGET
+if test -n "$CC_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $CC_FOR_TARGET" >&5
+echo "${ECHO_T}$CC_FOR_TARGET" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
+ fi
+ if test -z "$ac_cv_prog_CC_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC_FOR_TARGET"; then
+ ac_cv_prog_CC_FOR_TARGET="$CC_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
-if test -z "$ac_cv_prog_CONFIGURED_AR_FOR_TARGET" ; then
+fi
+CC_FOR_TARGET=$ac_cv_prog_CC_FOR_TARGET
+if test -n "$CC_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $CC_FOR_TARGET" >&5
+echo "${ECHO_T}$CC_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_CC_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_CC_FOR_TARGET" ; then
+ set dummy cc gcc
if test $build = $target ; then
- ncn_cv_CONFIGURED_AR_FOR_TARGET=$CONFIGURED_AR_FOR_TARGET
- # Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3936: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$ncn_cv_CONFIGURED_AR_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET="$ncn_cv_CONFIGURED_AR_FOR_TARGET" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET="ar"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET="ar"
+ CC_FOR_TARGET="$2"
+ else
+ CC_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+fi
+
+ for ncn_progname in c++ g++ cxx gxx; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CXX_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CXX_FOR_TARGET"; then
+ ac_cv_prog_CXX_FOR_TARGET="$CXX_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CXX_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-ncn_cv_CONFIGURED_AR_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET"
-if test -n "$ncn_cv_CONFIGURED_AR_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_CONFIGURED_AR_FOR_TARGET" 1>&6
+CXX_FOR_TARGET=$ac_cv_prog_CXX_FOR_TARGET
+if test -n "$CXX_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $CXX_FOR_TARGET" >&5
+echo "${ECHO_T}$CXX_FOR_TARGET" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
- CONFIGURED_AR_FOR_TARGET=$ncn_cv_CONFIGURED_AR_FOR_TARGET
- else
- CONFIGURED_AR_FOR_TARGET="${ncn_target_tool_prefix}ar"
+
+ fi
+ if test -z "$ac_cv_prog_CXX_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CXX_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CXX_FOR_TARGET"; then
+ ac_cv_prog_CXX_FOR_TARGET="$CXX_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CXX_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
fi
+done
+done
+
+fi
+fi
+CXX_FOR_TARGET=$ac_cv_prog_CXX_FOR_TARGET
+if test -n "$CXX_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $CXX_FOR_TARGET" >&5
+echo "${ECHO_T}$CXX_FOR_TARGET" >&6
else
- CONFIGURED_AR_FOR_TARGET="$ac_cv_prog_CONFIGURED_AR_FOR_TARGET"
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_CXX_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_CXX_FOR_TARGET" ; then
+ set dummy c++ g++ cxx gxx
+ if test $build = $target ; then
+ CXX_FOR_TARGET="$2"
+ else
+ CXX_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
fi
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3975: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+ for ncn_progname in dlltool; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_DLLTOOL_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$CONFIGURED_AS_FOR_TARGET"; then
- ac_cv_prog_CONFIGURED_AS_FOR_TARGET="$CONFIGURED_AS_FOR_TARGET" # Let the user override the test.
+ if test -n "$DLLTOOL_FOR_TARGET"; then
+ ac_cv_prog_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_AS_FOR_TARGET="${ncn_target_tool_prefix}as"
- break
- fi
- done
- IFS="$ac_save_ifs"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-CONFIGURED_AS_FOR_TARGET="$ac_cv_prog_CONFIGURED_AS_FOR_TARGET"
-if test -n "$CONFIGURED_AS_FOR_TARGET"; then
- echo "$ac_t""$CONFIGURED_AS_FOR_TARGET" 1>&6
+DLLTOOL_FOR_TARGET=$ac_cv_prog_DLLTOOL_FOR_TARGET
+if test -n "$DLLTOOL_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $DLLTOOL_FOR_TARGET" >&5
+echo "${ECHO_T}$DLLTOOL_FOR_TARGET" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
+ fi
+ if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_DLLTOOL_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$DLLTOOL_FOR_TARGET"; then
+ ac_cv_prog_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DLLTOOL_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
fi
-if test -z "$ac_cv_prog_CONFIGURED_AS_FOR_TARGET" ; then
+DLLTOOL_FOR_TARGET=$ac_cv_prog_DLLTOOL_FOR_TARGET
+if test -n "$DLLTOOL_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $DLLTOOL_FOR_TARGET" >&5
+echo "${ECHO_T}$DLLTOOL_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_DLLTOOL_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" ; then
+ set dummy dlltool
if test $build = $target ; then
- ncn_cv_CONFIGURED_AS_FOR_TARGET=$CONFIGURED_AS_FOR_TARGET
- # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4008: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$ncn_cv_CONFIGURED_AS_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET="$ncn_cv_CONFIGURED_AS_FOR_TARGET" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET="as"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET="as"
+ DLLTOOL_FOR_TARGET="$2"
+ else
+ DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+fi
+
+ for ncn_progname in gcc; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_GCC_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$GCC_FOR_TARGET"; then
+ ac_cv_prog_GCC_FOR_TARGET="$GCC_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_GCC_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-ncn_cv_CONFIGURED_AS_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET"
-if test -n "$ncn_cv_CONFIGURED_AS_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_CONFIGURED_AS_FOR_TARGET" 1>&6
+GCC_FOR_TARGET=$ac_cv_prog_GCC_FOR_TARGET
+if test -n "$GCC_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $GCC_FOR_TARGET" >&5
+echo "${ECHO_T}$GCC_FOR_TARGET" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
- CONFIGURED_AS_FOR_TARGET=$ncn_cv_CONFIGURED_AS_FOR_TARGET
- else
- CONFIGURED_AS_FOR_TARGET="${ncn_target_tool_prefix}as"
+
+ fi
+ if test -z "$ac_cv_prog_GCC_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_GCC_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$GCC_FOR_TARGET"; then
+ ac_cv_prog_GCC_FOR_TARGET="$GCC_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_GCC_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
fi
+done
+done
+
+fi
+fi
+GCC_FOR_TARGET=$ac_cv_prog_GCC_FOR_TARGET
+if test -n "$GCC_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $GCC_FOR_TARGET" >&5
+echo "${ECHO_T}$GCC_FOR_TARGET" >&6
else
- CONFIGURED_AS_FOR_TARGET="$ac_cv_prog_CONFIGURED_AS_FOR_TARGET"
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_GCC_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_GCC_FOR_TARGET" ; then
+ GCC_FOR_TARGET="${CC_FOR_TARGET}"
fi
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4047: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+ for ncn_progname in gcj; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_GCJ_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$CONFIGURED_DLLTOOL_FOR_TARGET"; then
- ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET="$CONFIGURED_DLLTOOL_FOR_TARGET" # Let the user override the test.
+ if test -n "$GCJ_FOR_TARGET"; then
+ ac_cv_prog_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}dlltool"
- break
- fi
- done
- IFS="$ac_save_ifs"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_GCJ_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-CONFIGURED_DLLTOOL_FOR_TARGET="$ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET"
-if test -n "$CONFIGURED_DLLTOOL_FOR_TARGET"; then
- echo "$ac_t""$CONFIGURED_DLLTOOL_FOR_TARGET" 1>&6
+GCJ_FOR_TARGET=$ac_cv_prog_GCJ_FOR_TARGET
+if test -n "$GCJ_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $GCJ_FOR_TARGET" >&5
+echo "${ECHO_T}$GCJ_FOR_TARGET" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
+ fi
+ if test -z "$ac_cv_prog_GCJ_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_GCJ_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$GCJ_FOR_TARGET"; then
+ ac_cv_prog_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_GCJ_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
-if test -z "$ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET" ; then
+fi
+GCJ_FOR_TARGET=$ac_cv_prog_GCJ_FOR_TARGET
+if test -n "$GCJ_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $GCJ_FOR_TARGET" >&5
+echo "${ECHO_T}$GCJ_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_GCJ_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_GCJ_FOR_TARGET" ; then
+ set dummy gcj
if test $build = $target ; then
- ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET=$CONFIGURED_DLLTOOL_FOR_TARGET
- # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4080: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET="$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET="dlltool"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET="dlltool"
+ GCJ_FOR_TARGET="$2"
+ else
+ GCJ_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+fi
+
+ for ncn_progname in gfortran; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_GFORTRAN_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$GFORTRAN_FOR_TARGET"; then
+ ac_cv_prog_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_GFORTRAN_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET"
-if test -n "$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET" 1>&6
+GFORTRAN_FOR_TARGET=$ac_cv_prog_GFORTRAN_FOR_TARGET
+if test -n "$GFORTRAN_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $GFORTRAN_FOR_TARGET" >&5
+echo "${ECHO_T}$GFORTRAN_FOR_TARGET" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
- CONFIGURED_DLLTOOL_FOR_TARGET=$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET
- else
- CONFIGURED_DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}dlltool"
+
+ fi
+ if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_GFORTRAN_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$GFORTRAN_FOR_TARGET"; then
+ ac_cv_prog_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_GFORTRAN_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
fi
+done
+done
+
+fi
+fi
+GFORTRAN_FOR_TARGET=$ac_cv_prog_GFORTRAN_FOR_TARGET
+if test -n "$GFORTRAN_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $GFORTRAN_FOR_TARGET" >&5
+echo "${ECHO_T}$GFORTRAN_FOR_TARGET" >&6
else
- CONFIGURED_DLLTOOL_FOR_TARGET="$ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET"
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_GFORTRAN_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET" ; then
+ set dummy gfortran
+ if test $build = $target ; then
+ GFORTRAN_FOR_TARGET="$2"
+ else
+ GFORTRAN_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
fi
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}ld; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4119: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+ for ncn_progname in ld; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_LD_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$CONFIGURED_LD_FOR_TARGET"; then
- ac_cv_prog_CONFIGURED_LD_FOR_TARGET="$CONFIGURED_LD_FOR_TARGET" # Let the user override the test.
+ if test -n "$LD_FOR_TARGET"; then
+ ac_cv_prog_LD_FOR_TARGET="$LD_FOR_TARGET" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_LD_FOR_TARGET="${ncn_target_tool_prefix}ld"
- break
- fi
- done
- IFS="$ac_save_ifs"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_LD_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-CONFIGURED_LD_FOR_TARGET="$ac_cv_prog_CONFIGURED_LD_FOR_TARGET"
-if test -n "$CONFIGURED_LD_FOR_TARGET"; then
- echo "$ac_t""$CONFIGURED_LD_FOR_TARGET" 1>&6
+LD_FOR_TARGET=$ac_cv_prog_LD_FOR_TARGET
+if test -n "$LD_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $LD_FOR_TARGET" >&5
+echo "${ECHO_T}$LD_FOR_TARGET" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
+ fi
+ if test -z "$ac_cv_prog_LD_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_LD_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$LD_FOR_TARGET"; then
+ ac_cv_prog_LD_FOR_TARGET="$LD_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_LD_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+LD_FOR_TARGET=$ac_cv_prog_LD_FOR_TARGET
+if test -n "$LD_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $LD_FOR_TARGET" >&5
+echo "${ECHO_T}$LD_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-if test -z "$ac_cv_prog_CONFIGURED_LD_FOR_TARGET" ; then
+
+ fi
+ test -n "$ac_cv_prog_LD_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_LD_FOR_TARGET" ; then
+ set dummy ld
if test $build = $target ; then
- ncn_cv_CONFIGURED_LD_FOR_TARGET=$CONFIGURED_LD_FOR_TARGET
- # Extract the first word of "ld", so it can be a program name with args.
-set dummy ld; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4152: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$ncn_cv_CONFIGURED_LD_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET="$ncn_cv_CONFIGURED_LD_FOR_TARGET" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET="ld"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET="ld"
+ LD_FOR_TARGET="$2"
+ else
+ LD_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+fi
+
+ for ncn_progname in lipo; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_LIPO_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$LIPO_FOR_TARGET"; then
+ ac_cv_prog_LIPO_FOR_TARGET="$LIPO_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_LIPO_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-ncn_cv_CONFIGURED_LD_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET"
-if test -n "$ncn_cv_CONFIGURED_LD_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_CONFIGURED_LD_FOR_TARGET" 1>&6
+LIPO_FOR_TARGET=$ac_cv_prog_LIPO_FOR_TARGET
+if test -n "$LIPO_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $LIPO_FOR_TARGET" >&5
+echo "${ECHO_T}$LIPO_FOR_TARGET" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
- CONFIGURED_LD_FOR_TARGET=$ncn_cv_CONFIGURED_LD_FOR_TARGET
- else
- CONFIGURED_LD_FOR_TARGET="${ncn_target_tool_prefix}ld"
+
fi
+ if test -z "$ac_cv_prog_LIPO_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_LIPO_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$LIPO_FOR_TARGET"; then
+ ac_cv_prog_LIPO_FOR_TARGET="$LIPO_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_LIPO_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+LIPO_FOR_TARGET=$ac_cv_prog_LIPO_FOR_TARGET
+if test -n "$LIPO_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $LIPO_FOR_TARGET" >&5
+echo "${ECHO_T}$LIPO_FOR_TARGET" >&6
else
- CONFIGURED_LD_FOR_TARGET="$ac_cv_prog_CONFIGURED_LD_FOR_TARGET"
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}nm; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4191: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+ fi
+ test -n "$ac_cv_prog_LIPO_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_LIPO_FOR_TARGET" ; then
+ set dummy lipo
+ if test $build = $target ; then
+ LIPO_FOR_TARGET="$2"
+ else
+ LIPO_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+fi
+
+ for ncn_progname in nm; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_NM_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$CONFIGURED_NM_FOR_TARGET"; then
- ac_cv_prog_CONFIGURED_NM_FOR_TARGET="$CONFIGURED_NM_FOR_TARGET" # Let the user override the test.
+ if test -n "$NM_FOR_TARGET"; then
+ ac_cv_prog_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_NM_FOR_TARGET="${ncn_target_tool_prefix}nm"
- break
- fi
- done
- IFS="$ac_save_ifs"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_NM_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-CONFIGURED_NM_FOR_TARGET="$ac_cv_prog_CONFIGURED_NM_FOR_TARGET"
-if test -n "$CONFIGURED_NM_FOR_TARGET"; then
- echo "$ac_t""$CONFIGURED_NM_FOR_TARGET" 1>&6
+NM_FOR_TARGET=$ac_cv_prog_NM_FOR_TARGET
+if test -n "$NM_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $NM_FOR_TARGET" >&5
+echo "${ECHO_T}$NM_FOR_TARGET" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
+ fi
+ if test -z "$ac_cv_prog_NM_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_NM_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$NM_FOR_TARGET"; then
+ ac_cv_prog_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_NM_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+NM_FOR_TARGET=$ac_cv_prog_NM_FOR_TARGET
+if test -n "$NM_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $NM_FOR_TARGET" >&5
+echo "${ECHO_T}$NM_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-if test -z "$ac_cv_prog_CONFIGURED_NM_FOR_TARGET" ; then
+
+ fi
+ test -n "$ac_cv_prog_NM_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_NM_FOR_TARGET" ; then
+ set dummy nm
if test $build = $target ; then
- ncn_cv_CONFIGURED_NM_FOR_TARGET=$CONFIGURED_NM_FOR_TARGET
- # Extract the first word of "nm", so it can be a program name with args.
-set dummy nm; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4224: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$ncn_cv_CONFIGURED_NM_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET="$ncn_cv_CONFIGURED_NM_FOR_TARGET" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET="nm"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET="nm"
+ NM_FOR_TARGET="$2"
+ else
+ NM_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
fi
+
+ for ncn_progname in ranlib; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_RANLIB_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$RANLIB_FOR_TARGET"; then
+ ac_cv_prog_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_RANLIB_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
-ncn_cv_CONFIGURED_NM_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET"
-if test -n "$ncn_cv_CONFIGURED_NM_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_CONFIGURED_NM_FOR_TARGET" 1>&6
+fi
+RANLIB_FOR_TARGET=$ac_cv_prog_RANLIB_FOR_TARGET
+if test -n "$RANLIB_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $RANLIB_FOR_TARGET" >&5
+echo "${ECHO_T}$RANLIB_FOR_TARGET" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
- CONFIGURED_NM_FOR_TARGET=$ncn_cv_CONFIGURED_NM_FOR_TARGET
- else
- CONFIGURED_NM_FOR_TARGET="${ncn_target_tool_prefix}nm"
+
fi
+ if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_RANLIB_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$RANLIB_FOR_TARGET"; then
+ ac_cv_prog_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_RANLIB_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+RANLIB_FOR_TARGET=$ac_cv_prog_RANLIB_FOR_TARGET
+if test -n "$RANLIB_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $RANLIB_FOR_TARGET" >&5
+echo "${ECHO_T}$RANLIB_FOR_TARGET" >&6
else
- CONFIGURED_NM_FOR_TARGET="$ac_cv_prog_CONFIGURED_NM_FOR_TARGET"
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_RANLIB_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" ; then
+ RANLIB_FOR_TARGET=":"
fi
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4263: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+ for ncn_progname in strip; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_STRIP_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$CONFIGURED_RANLIB_FOR_TARGET"; then
- ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET="$CONFIGURED_RANLIB_FOR_TARGET" # Let the user override the test.
+ if test -n "$STRIP_FOR_TARGET"; then
+ ac_cv_prog_STRIP_FOR_TARGET="$STRIP_FOR_TARGET" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET="${ncn_target_tool_prefix}ranlib"
- break
- fi
- done
- IFS="$ac_save_ifs"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_STRIP_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-CONFIGURED_RANLIB_FOR_TARGET="$ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET"
-if test -n "$CONFIGURED_RANLIB_FOR_TARGET"; then
- echo "$ac_t""$CONFIGURED_RANLIB_FOR_TARGET" 1>&6
+STRIP_FOR_TARGET=$ac_cv_prog_STRIP_FOR_TARGET
+if test -n "$STRIP_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $STRIP_FOR_TARGET" >&5
+echo "${ECHO_T}$STRIP_FOR_TARGET" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-fi
-if test -z "$ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET" ; then
- if test $build = $target ; then
- ncn_cv_CONFIGURED_RANLIB_FOR_TARGET=$CONFIGURED_RANLIB_FOR_TARGET
- # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4296: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET="$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET="ranlib"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET=":"
+ fi
+ if test -z "$ac_cv_prog_STRIP_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_STRIP_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$STRIP_FOR_TARGET"; then
+ ac_cv_prog_STRIP_FOR_TARGET="$STRIP_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_STRIP_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-ncn_cv_CONFIGURED_RANLIB_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET"
-if test -n "$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET" 1>&6
+STRIP_FOR_TARGET=$ac_cv_prog_STRIP_FOR_TARGET
+if test -n "$STRIP_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $STRIP_FOR_TARGET" >&5
+echo "${ECHO_T}$STRIP_FOR_TARGET" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
- CONFIGURED_RANLIB_FOR_TARGET=$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET
+
+ fi
+ test -n "$ac_cv_prog_STRIP_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_STRIP_FOR_TARGET" ; then
+ set dummy strip
+ if test $build = $target ; then
+ STRIP_FOR_TARGET="$2"
else
- CONFIGURED_RANLIB_FOR_TARGET=":"
+ STRIP_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
-else
- CONFIGURED_RANLIB_FOR_TARGET="$ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET"
fi
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}windres; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4335: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+ for ncn_progname in windres; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_WINDRES_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$CONFIGURED_WINDRES_FOR_TARGET"; then
- ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET="$CONFIGURED_WINDRES_FOR_TARGET" # Let the user override the test.
+ if test -n "$WINDRES_FOR_TARGET"; then
+ ac_cv_prog_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET="${ncn_target_tool_prefix}windres"
- break
- fi
- done
- IFS="$ac_save_ifs"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_WINDRES_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-CONFIGURED_WINDRES_FOR_TARGET="$ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET"
-if test -n "$CONFIGURED_WINDRES_FOR_TARGET"; then
- echo "$ac_t""$CONFIGURED_WINDRES_FOR_TARGET" 1>&6
+WINDRES_FOR_TARGET=$ac_cv_prog_WINDRES_FOR_TARGET
+if test -n "$WINDRES_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $WINDRES_FOR_TARGET" >&5
+echo "${ECHO_T}$WINDRES_FOR_TARGET" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-fi
-if test -z "$ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET" ; then
- if test $build = $target ; then
- ncn_cv_CONFIGURED_WINDRES_FOR_TARGET=$CONFIGURED_WINDRES_FOR_TARGET
- # Extract the first word of "windres", so it can be a program name with args.
-set dummy windres; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4368: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET="$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET="windres"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET="windres"
+ fi
+ if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_WINDRES_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$WINDRES_FOR_TARGET"; then
+ ac_cv_prog_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_WINDRES_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-ncn_cv_CONFIGURED_WINDRES_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET"
-if test -n "$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET" 1>&6
+WINDRES_FOR_TARGET=$ac_cv_prog_WINDRES_FOR_TARGET
+if test -n "$WINDRES_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $WINDRES_FOR_TARGET" >&5
+echo "${ECHO_T}$WINDRES_FOR_TARGET" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
- CONFIGURED_WINDRES_FOR_TARGET=$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET
+
+ fi
+ test -n "$ac_cv_prog_WINDRES_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" ; then
+ set dummy windres
+ if test $build = $target ; then
+ WINDRES_FOR_TARGET="$2"
else
- CONFIGURED_WINDRES_FOR_TARGET="${ncn_target_tool_prefix}windres"
+ WINDRES_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
-else
- CONFIGURED_WINDRES_FOR_TARGET="$ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET"
fi
-
-
-
-
-
-
+CONFIGURED_AR_FOR_TARGET="$AR_FOR_TARGET"
+CONFIGURED_AS_FOR_TARGET="$AS_FOR_TARGET"
+CONFIGURED_CC_FOR_TARGET="$CC_FOR_TARGET"
+CONFIGURED_CXX_FOR_TARGET="$CXX_FOR_TARGET"
+CONFIGURED_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET"
+CONFIGURED_GCC_FOR_TARGET="$GCC_FOR_TARGET"
+CONFIGURED_GCJ_FOR_TARGET="$GCJ_FOR_TARGET"
+CONFIGURED_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET"
+CONFIGURED_LD_FOR_TARGET="$LD_FOR_TARGET"
+CONFIGURED_LIPO_FOR_TARGET="$LIPO_FOR_TARGET"
+CONFIGURED_NM_FOR_TARGET="$NM_FOR_TARGET"
+CONFIGURED_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET"
+CONFIGURED_STRIP_FOR_TARGET="$STRIP_FOR_TARGET"
+CONFIGURED_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET"
# should also eliminate all of this cleanly.
AR_FOR_TARGET="\$(USUAL_AR_FOR_TARGET)"
AS_FOR_TARGET="\$(USUAL_AS_FOR_TARGET)"
+ CC_FOR_TARGET="\$(USUAL_CC_FOR_TARGET)"
+ CXX_FOR_TARGET="\$(USUAL_CXX_FOR_TARGET)"
+ RAW_CXX_FOR_TARGET="\$(USUAL_RAW_CXX_FOR_TARGET)"
DLLTOOL_FOR_TARGET="\$(USUAL_DLLTOOL_FOR_TARGET)"
+ GCC_FOR_TARGET="\$(USUAL_GCC_FOR_TARGET)"
+ GCJ_FOR_TARGET="\$(USUAL_GCJ_FOR_TARGET)"
+ GFORTRAN_FOR_TARGET="\$(USUAL_GFORTRAN_FOR_TARGET)"
LD_FOR_TARGET="\$(USUAL_LD_FOR_TARGET)"
+ LIPO_FOR_TARGET="\$(USUAL_LIPO_FOR_TARGET)"
NM_FOR_TARGET="\$(USUAL_NM_FOR_TARGET)"
RANLIB_FOR_TARGET="\$(USUAL_RANLIB_FOR_TARGET)"
+ STRIP_FOR_TARGET="\$(USUAL_STRIP_FOR_TARGET)"
WINDRES_FOR_TARGET="\$(USUAL_WINDRES_FOR_TARGET)"
else
# Just use the ones we found.
AR_FOR_TARGET="\$(CONFIGURED_AR_FOR_TARGET)"
AS_FOR_TARGET="\$(CONFIGURED_AS_FOR_TARGET)"
+ CC_FOR_TARGET="\$(CONFIGURED_CC_FOR_TARGET)"
+ CXX_FOR_TARGET="\$(CONFIGURED_CXX_FOR_TARGET)"
+ RAW_CXX_FOR_TARGET="\$(CONFIGURED_CXX_FOR_TARGET)"
DLLTOOL_FOR_TARGET="\$(CONFIGURED_DLLTOOL_FOR_TARGET)"
+ GCC_FOR_TARGET="\$(CONFIGURED_GCC_FOR_TARGET)"
+ GCJ_FOR_TARGET="\$(CONFIGURED_GCJ_FOR_TARGET)"
+ GFORTRAN_FOR_TARGET="\$(CONFIGURED_GFORTRAN_FOR_TARGET)"
LD_FOR_TARGET="\$(CONFIGURED_LD_FOR_TARGET)"
+ LIPO_FOR_TARGET="\$(CONFIGURED_LIPO_FOR_TARGET)"
NM_FOR_TARGET="\$(CONFIGURED_NM_FOR_TARGET)"
RANLIB_FOR_TARGET="\$(CONFIGURED_RANLIB_FOR_TARGET)"
- WINDRES_FOR_TARGET="\$(CONFIGURED_WINDRES_FOR_TARGET)"
+ STRIP_FOR_TARGET="\$(CONFIGURED_STRIP_FOR_TARGET)"
+ WINDRES_FOR_TARGET="\$(CONFIGURED_WINDRES_FOR_TARGET)"
fi
-
-
-
-
-
# Certain tools may need extra flags.
AR_FOR_TARGET=${AR_FOR_TARGET}${extra_arflags_for_target}
RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target}
NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:4452: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
USE_MAINTAINER_MODE=$enableval
else
USE_MAINTAINER_MODE=no
-fi
-
-echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
+fi;
+echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
+echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6
if test "$USE_MAINTAINER_MODE" = yes; then
else
MAINTAINER_MODE_TRUE='#'
MAINTAINER_MODE_FALSE=
-fi
+fi
MAINT=$MAINTAINER_MODE_TRUE
# ---------------------
esac
+# It makes debugging easier if we create as symlinks the stage directories
+# gcc for stageN-gcc and stagePREV-gcc for stage(N-1). In case this is not
+# possible, however, we can resort to mv.
+echo "$as_me:$LINENO: checking if symbolic links between directories work" >&5
+echo $ECHO_N "checking if symbolic links between directories work... $ECHO_C" >&6
+if test "${gcc_cv_prog_ln_s_dir+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "${LN_S}" = "ln -s" \
+ && mkdir confdir.s1 \
+ && ln -s confdir.s1 confdir.s2 \
+ && echo timestamp1 > confdir.s1/conftest.1 \
+ && cmp confdir.s1/conftest.1 confdir.s2/conftest.1 \
+ && echo timestamp2 > confdir.s2/conftest.2 \
+ && cmp confdir.s1/conftest.2 confdir.s1/conftest.2 \
+ && rm -f confdir.s2; then
+ gcc_cv_prog_ln_s_dir=yes
+else
+ gcc_cv_prog_ln_s_dir=no
+fi
+rm -rf confdir.s1 confdir.s2
+fi
+echo "$as_me:$LINENO: result: $gcc_cv_prog_ln_s_dir" >&5
+echo "${ECHO_T}$gcc_cv_prog_ln_s_dir" >&6
+
+case ${gcc_cv_prog_ln_s_dir} in
+ yes)
+ CREATE_LINK_TO_DIR='ln -s $$1 $$2'
+ UNDO_LINK_TO_DIR='rm -f $$1' ;;
+ *)
+ CREATE_LINK_TO_DIR='mv $$1 $$2'
+ UNDO_LINK_TO_DIR='mv $$1 $$2' ;;
+esac
+
+
+
# Enable -Werror in bootstrap stage2 and later.
# Change the default to "no" on release branches.
# Check whether --enable-werror or --disable-werror was given.
if test "${enable_werror+set}" = set; then
enableval="$enable_werror"
- :
+
else
enable_werror=yes
-fi
-
+fi;
case ${enable_werror} in
yes) stage2_werror_flag="--enable-werror-always" ;;
*) stage2_werror_flag="" ;;
esac
-trap '' 1 2 15
-cat > confcache <<\EOF
+ ac_config_files="$ac_config_files Makefile"
+cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
-# scripts and configure runs. It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems. If it contains results you don't
+# want to keep, you may remove or edit it.
#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already. You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
#
-EOF
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
- case `(ac_space=' '; set | grep ac_space) 2>&1` in
- *ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote substitution
- # turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- -e "s/'/'\\\\''/g" \
- -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
- ;;
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
- ;;
- esac >> confcache
-if cmp -s $cache_file confcache; then
- :
-else
+{
+ (set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n \
+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ ;;
+ esac;
+} |
+ sed '
+ t clear
+ : clear
+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+ t end
+ /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ : end' >>confcache
+if diff $cache_file confcache >/dev/null 2>&1; then :; else
if test -w $cache_file; then
- echo "updating cache $cache_file"
- cat confcache > $cache_file
+ test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
+ cat confcache >$cache_file
else
echo "not updating unwritable cache $cache_file"
fi
fi
rm -f confcache
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
+s/:*\$(srcdir):*/:/;
+s/:*\${srcdir}:*/:/;
+s/:*@srcdir@:*/:/;
+s/^\([^=]*=[ ]*\):*/\1/;
+s/:*$//;
+s/^[^=]*=[ ]*$//;
+}'
fi
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
# Transform confdefs.h into DEFS.
# Protect against shell expansion while executing Makefile rules.
# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then we branch to the quote section. Otherwise,
+# look for a macro that doesn't take arguments.
+cat >confdef2opt.sed <<\_ACEOF
+t clear
+: clear
+s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
+t quote
+s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
+t quote
+d
+: quote
+s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
+s,\[,\\&,g
+s,\],\\&,g
+s,\$,$$,g
+p
+_ACEOF
+# We use echo to avoid assuming a particular line-breaking character.
+# The extra dot is to prevent the shell from consuming trailing
+# line-breaks from the sub-command output. A line-break within
+# single-quotes doesn't work because, if this script is created in a
+# platform that uses two characters for line-breaks (e.g., DOS), tr
+# would break.
+ac_LF_and_DOT=`echo; echo .`
+DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
+rm -f confdef2opt.sed
+
+
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_i=`echo "$ac_i" |
+ sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
+ # 2. Add them.
+ ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
+ ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+LTLIBOBJS=$ac_ltlibobjs
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
+
+: ${CONFIG_STATUS=./config.status}
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF
+#! $SHELL
+# Generated by $as_me.
# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
+# configure, is in config.log if it exists.
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+## --------------------- ##
+## M4sh Initialization. ##
+## --------------------- ##
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+ set -o posix
+fi
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ as_unset=unset
+else
+ as_unset=false
+fi
+
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ $as_unset $as_var
+ fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)$' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+ /^X\/\(\/\/\)$/{ s//\1/; q; }
+ /^X\/\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+
+
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" || {
+ # Find who we are. Look in the path if we contain no path at all
+ # relative or not.
+ case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+
+ ;;
+ esac
+ # We did not find ourselves, most probably we were run as `sh COMMAND'
+ # in which case we are not to be found in the path.
+ if test "x$as_myself" = x; then
+ as_myself=$0
+ fi
+ if test ! -f "$as_myself"; then
+ { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
+echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ case $CONFIG_SHELL in
+ '')
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for as_base in sh bash ksh sh5; do
+ case $as_dir in
+ /*)
+ if ("$as_dir/$as_base" -c '
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+ CONFIG_SHELL=$as_dir/$as_base
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+ fi;;
+ esac
+ done
+done
+;;
+ esac
+
+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+ # uniformly replaced by the line number. The first 'sed' inserts a
+ # line-number line before each line; the second 'sed' does the real
+ # work. The second script uses 'N' to pair each line-number line
+ # with the numbered line, and appends trailing '-' during
+ # substitution so that $LINENO is not a special case at line end.
+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
+ sed '=' <$as_myself |
+ sed '
+ N
+ s,$,-,
+ : loop
+ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+ t loop
+ s,-$,,
+ s,^['$as_cr_digits']*\n,,
+ ' >$as_me.lineno &&
+ chmod +x $as_me.lineno ||
+ { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
+echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
+ { (exit 1); exit 1; }; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensible to this).
+ . ./$as_me.lineno
+ # Exit status is that of the last command.
+ exit
+}
+
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+ *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T=' ' ;;
+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+ # We could just check for DJGPP; but this test a) works b) is more generic
+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+ if test -f conf$$.exe; then
+ # Don't use ln at all; we don't have any links
+ as_ln_s='cp -p'
+ else
+ as_ln_s='ln -s'
+ fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p=:
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+as_executable_p="test -f"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" $as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
+exec 6>&1
+
+# Open the log real soon, to keep \$[0] and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling. Logging --version etc. is OK.
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+} >&5
+cat >&5 <<_CSEOF
+
+This file was extended by $as_me, which was
+generated by GNU Autoconf 2.59. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+ CONFIG_LINKS = $CONFIG_LINKS
+ CONFIG_COMMANDS = $CONFIG_COMMANDS
+ $ $0 $@
+
+_CSEOF
+echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
+echo >&5
+_ACEOF
+
+# Files that config.status was made for.
+if test -n "$ac_config_files"; then
+ echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_headers"; then
+ echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_links"; then
+ echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_commands"; then
+ echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+ac_cs_usage="\
+\`$as_me' instantiates files from templates according to the
+current configuration.
+
+Usage: $0 [OPTIONS] [FILE]...
+
+ -h, --help print this help, then exit
+ -V, --version print version number, then exit
+ -q, --quiet do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+
+Configuration files:
+$config_files
+
+Report bugs to <bug-autoconf@gnu.org>."
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+ac_cs_version="\\
+config.status
+configured by $0, generated by GNU Autoconf 2.59,
+ with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
+
+Copyright (C) 2003 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+srcdir=$srcdir
+INSTALL="$INSTALL"
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If no file are specified by the user, then we need to provide default
+# value. By we need to know if files were specified by the user.
+ac_need_defaults=:
+while test $# != 0
do
- case "\$ac_option" in
+ case $1 in
+ --*=*)
+ ac_option=`expr "x$1" : 'x\([^=]*\)='`
+ ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
+ ac_shift=:
+ ;;
+ -*)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
+ ;;
+ *) # This is not an option, so the user has probably given explicit
+ # arguments.
+ ac_option=$1
+ ac_need_defaults=false;;
+ esac
+
+ case $ac_option in
+ # Handling of the options.
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
- exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
- -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 2.13"
- exit 0 ;;
- -help | --help | --hel | --he | --h)
- echo "\$ac_cs_usage"; exit 0 ;;
- *) echo "\$ac_cs_usage"; exit 1 ;;
+ ac_cs_recheck=: ;;
+ --version | --vers* | -V )
+ echo "$ac_cs_version"; exit 0 ;;
+ --he | --h)
+ # Conflict between --help and --header
+ { { echo "$as_me:$LINENO: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&2;}
+ { (exit 1); exit 1; }; };;
+ --help | --hel | -h )
+ echo "$ac_cs_usage"; exit 0 ;;
+ --debug | --d* | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+ CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+ ac_need_defaults=false;;
+ --header | --heade | --head | --hea )
+ $ac_shift
+ CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
+ ac_need_defaults=false;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
+
+ # This is an error.
+ -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2;}
+ { (exit 1); exit 1; }; } ;;
+
+ *) ac_config_targets="$ac_config_targets $1" ;;
+
esac
+ shift
done
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
+ac_configure_extra_args=
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@TOPLEVEL_CONFIGURE_ARGUMENTS@%$TOPLEVEL_CONFIGURE_ARGUMENTS%g
-s%@build_subdir@%$build_subdir%g
-s%@host_subdir@%$host_subdir%g
-s%@target_subdir@%$target_subdir%g
-s%@CC@%$CC%g
-s%@GNATBIND@%$GNATBIND%g
-s%@stage1_languages@%$stage1_languages%g
-s%@DEFAULT_YACC@%$DEFAULT_YACC%g
-s%@DEFAULT_M4@%$DEFAULT_M4%g
-s%@DEFAULT_LEX@%$DEFAULT_LEX%g
-/@maybe_dependencies@/r $maybe_dependencies
-s%@maybe_dependencies@%%g
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+if \$ac_cs_recheck; then
+ echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
+ exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+fi
+
+_ACEOF
+
+
+
+
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+for ac_config_target in $ac_config_targets
+do
+ case "$ac_config_target" in
+ # Handling of arguments.
+ "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+ { (exit 1); exit 1; }; };;
+ esac
+done
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used. Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+fi
+
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason to put it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Create a temporary directory, and hook for its removal unless debugging.
+$debug ||
+{
+ trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+ trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+
+# Create a (secure) tmp directory for tmp files.
+
+{
+ tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
+ test -n "$tmp" && test -d "$tmp"
+} ||
+{
+ tmp=./confstat$$-$RANDOM
+ (umask 077 && mkdir $tmp)
+} ||
+{
+ echo "$me: cannot create a temporary directory in ." >&2
+ { (exit 1); exit 1; }
+}
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+
+#
+# CONFIG_FILES section.
+#
+
+# No need to generate the scripts if there are no CONFIG_FILES.
+# This happens for instance when ./config.status config.h
+if test -n "\$CONFIG_FILES"; then
+ # Protect against being on the right side of a sed subst in config.status.
+ sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
+ s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
+s,@SHELL@,$SHELL,;t t
+s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
+s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
+s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
+s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
+s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
+s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
+s,@exec_prefix@,$exec_prefix,;t t
+s,@prefix@,$prefix,;t t
+s,@program_transform_name@,$program_transform_name,;t t
+s,@bindir@,$bindir,;t t
+s,@sbindir@,$sbindir,;t t
+s,@libexecdir@,$libexecdir,;t t
+s,@datadir@,$datadir,;t t
+s,@sysconfdir@,$sysconfdir,;t t
+s,@sharedstatedir@,$sharedstatedir,;t t
+s,@localstatedir@,$localstatedir,;t t
+s,@libdir@,$libdir,;t t
+s,@includedir@,$includedir,;t t
+s,@oldincludedir@,$oldincludedir,;t t
+s,@infodir@,$infodir,;t t
+s,@mandir@,$mandir,;t t
+s,@build_alias@,$build_alias,;t t
+s,@host_alias@,$host_alias,;t t
+s,@target_alias@,$target_alias,;t t
+s,@DEFS@,$DEFS,;t t
+s,@ECHO_C@,$ECHO_C,;t t
+s,@ECHO_N@,$ECHO_N,;t t
+s,@ECHO_T@,$ECHO_T,;t t
+s,@LIBS@,$LIBS,;t t
+s,@build@,$build,;t t
+s,@build_cpu@,$build_cpu,;t t
+s,@build_vendor@,$build_vendor,;t t
+s,@build_os@,$build_os,;t t
+s,@host@,$host,;t t
+s,@host_cpu@,$host_cpu,;t t
+s,@host_vendor@,$host_vendor,;t t
+s,@host_os@,$host_os,;t t
+s,@target@,$target,;t t
+s,@target_cpu@,$target_cpu,;t t
+s,@target_vendor@,$target_vendor,;t t
+s,@target_os@,$target_os,;t t
+s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
+s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
+s,@INSTALL_DATA@,$INSTALL_DATA,;t t
+s,@LN@,$LN,;t t
+s,@LN_S@,$LN_S,;t t
+s,@TOPLEVEL_CONFIGURE_ARGUMENTS@,$TOPLEVEL_CONFIGURE_ARGUMENTS,;t t
+s,@build_subdir@,$build_subdir,;t t
+s,@host_subdir@,$host_subdir,;t t
+s,@target_subdir@,$target_subdir,;t t
+s,@CC@,$CC,;t t
+s,@CFLAGS@,$CFLAGS,;t t
+s,@LDFLAGS@,$LDFLAGS,;t t
+s,@CPPFLAGS@,$CPPFLAGS,;t t
+s,@ac_ct_CC@,$ac_ct_CC,;t t
+s,@EXEEXT@,$EXEEXT,;t t
+s,@OBJEXT@,$OBJEXT,;t t
+s,@GNATBIND@,$GNATBIND,;t t
+s,@ac_ct_GNATBIND@,$ac_ct_GNATBIND,;t t
+s,@do_compare@,$do_compare,;t t
+s,@gmplibs@,$gmplibs,;t t
+s,@gmpinc@,$gmpinc,;t t
+s,@stage1_languages@,$stage1_languages,;t t
+s,@SYSROOT_CFLAGS_FOR_TARGET@,$SYSROOT_CFLAGS_FOR_TARGET,;t t
+s,@CONFIGURED_BISON@,$CONFIGURED_BISON,;t t
+s,@CONFIGURED_YACC@,$CONFIGURED_YACC,;t t
+s,@CONFIGURED_M4@,$CONFIGURED_M4,;t t
+s,@CONFIGURED_FLEX@,$CONFIGURED_FLEX,;t t
+s,@CONFIGURED_LEX@,$CONFIGURED_LEX,;t t
+s,@CONFIGURED_MAKEINFO@,$CONFIGURED_MAKEINFO,;t t
+s,@bootstrap_lean@,$bootstrap_lean,;t t
+s,@default_target@,$default_target,;t t
+s,@RPATH_ENVVAR@,$RPATH_ENVVAR,;t t
+s,@BUILD_PREFIX@,$BUILD_PREFIX,;t t
+s,@BUILD_PREFIX_1@,$BUILD_PREFIX_1,;t t
+s,@tooldir@,$tooldir,;t t
+s,@build_tooldir@,$build_tooldir,;t t
+s,@GDB_TK@,$GDB_TK,;t t
+s,@build_configargs@,$build_configargs,;t t
+s,@build_configdirs@,$build_configdirs,;t t
+s,@host_configargs@,$host_configargs,;t t
+s,@configdirs@,$configdirs,;t t
+s,@target_configargs@,$target_configargs,;t t
+s,@target_configdirs@,$target_configdirs,;t t
+s,@CC_FOR_BUILD@,$CC_FOR_BUILD,;t t
+s,@config_shell@,$config_shell,;t t
+s,@AR@,$AR,;t t
+s,@AS@,$AS,;t t
+s,@DLLTOOL@,$DLLTOOL,;t t
+s,@LD@,$LD,;t t
+s,@NM@,$NM,;t t
+s,@RANLIB@,$RANLIB,;t t
+s,@WINDRES@,$WINDRES,;t t
+s,@OBJCOPY@,$OBJCOPY,;t t
+s,@OBJDUMP@,$OBJDUMP,;t t
+s,@CXX@,$CXX,;t t
+s,@CFLAGS_FOR_BUILD@,$CFLAGS_FOR_BUILD,;t t
+s,@CXXFLAGS@,$CXXFLAGS,;t t
+s,@AR_FOR_TARGET@,$AR_FOR_TARGET,;t t
+s,@AS_FOR_TARGET@,$AS_FOR_TARGET,;t t
+s,@CC_FOR_TARGET@,$CC_FOR_TARGET,;t t
+s,@CXX_FOR_TARGET@,$CXX_FOR_TARGET,;t t
+s,@DLLTOOL_FOR_TARGET@,$DLLTOOL_FOR_TARGET,;t t
+s,@GCC_FOR_TARGET@,$GCC_FOR_TARGET,;t t
+s,@GCJ_FOR_TARGET@,$GCJ_FOR_TARGET,;t t
+s,@GFORTRAN_FOR_TARGET@,$GFORTRAN_FOR_TARGET,;t t
+s,@LD_FOR_TARGET@,$LD_FOR_TARGET,;t t
+s,@LIPO_FOR_TARGET@,$LIPO_FOR_TARGET,;t t
+s,@NM_FOR_TARGET@,$NM_FOR_TARGET,;t t
+s,@RANLIB_FOR_TARGET@,$RANLIB_FOR_TARGET,;t t
+s,@STRIP_FOR_TARGET@,$STRIP_FOR_TARGET,;t t
+s,@WINDRES_FOR_TARGET@,$WINDRES_FOR_TARGET,;t t
+s,@CONFIGURED_AR_FOR_TARGET@,$CONFIGURED_AR_FOR_TARGET,;t t
+s,@CONFIGURED_AS_FOR_TARGET@,$CONFIGURED_AS_FOR_TARGET,;t t
+s,@CONFIGURED_CC_FOR_TARGET@,$CONFIGURED_CC_FOR_TARGET,;t t
+s,@CONFIGURED_CXX_FOR_TARGET@,$CONFIGURED_CXX_FOR_TARGET,;t t
+s,@CONFIGURED_DLLTOOL_FOR_TARGET@,$CONFIGURED_DLLTOOL_FOR_TARGET,;t t
+s,@CONFIGURED_GCC_FOR_TARGET@,$CONFIGURED_GCC_FOR_TARGET,;t t
+s,@CONFIGURED_GCJ_FOR_TARGET@,$CONFIGURED_GCJ_FOR_TARGET,;t t
+s,@CONFIGURED_GFORTRAN_FOR_TARGET@,$CONFIGURED_GFORTRAN_FOR_TARGET,;t t
+s,@CONFIGURED_LD_FOR_TARGET@,$CONFIGURED_LD_FOR_TARGET,;t t
+s,@CONFIGURED_LIPO_FOR_TARGET@,$CONFIGURED_LIPO_FOR_TARGET,;t t
+s,@CONFIGURED_NM_FOR_TARGET@,$CONFIGURED_NM_FOR_TARGET,;t t
+s,@CONFIGURED_RANLIB_FOR_TARGET@,$CONFIGURED_RANLIB_FOR_TARGET,;t t
+s,@CONFIGURED_STRIP_FOR_TARGET@,$CONFIGURED_STRIP_FOR_TARGET,;t t
+s,@CONFIGURED_WINDRES_FOR_TARGET@,$CONFIGURED_WINDRES_FOR_TARGET,;t t
+s,@FLAGS_FOR_TARGET@,$FLAGS_FOR_TARGET,;t t
+s,@RAW_CXX_FOR_TARGET@,$RAW_CXX_FOR_TARGET,;t t
+s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t
+s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t
+s,@MAINT@,$MAINT,;t t
+s,@stage1_cflags@,$stage1_cflags,;t t
+s,@CREATE_LINK_TO_DIR@,$CREATE_LINK_TO_DIR,;t t
+s,@UNDO_LINK_TO_DIR@,$UNDO_LINK_TO_DIR,;t t
+s,@stage2_werror_flag@,$stage2_werror_flag,;t t
+s,@LIBOBJS@,$LIBOBJS,;t t
+s,@LTLIBOBJS@,$LTLIBOBJS,;t t
/@serialization_dependencies@/r $serialization_dependencies
-s%@serialization_dependencies@%%g
+s,@serialization_dependencies@,,;t t
/@host_makefile_frag@/r $host_makefile_frag
-s%@host_makefile_frag@%%g
+s,@host_makefile_frag@,,;t t
/@target_makefile_frag@/r $target_makefile_frag
-s%@target_makefile_frag@%%g
+s,@target_makefile_frag@,,;t t
/@alphaieee_frag@/r $alphaieee_frag
-s%@alphaieee_frag@%%g
+s,@alphaieee_frag@,,;t t
/@ospace_frag@/r $ospace_frag
-s%@ospace_frag@%%g
-s%@SET_LIB_PATH@%$SET_LIB_PATH%g
-s%@RPATH_ENVVAR@%$RPATH_ENVVAR%g
-s%@BUILD_PREFIX@%$BUILD_PREFIX%g
-s%@BUILD_PREFIX_1@%$BUILD_PREFIX_1%g
-s%@gcc_version_trigger@%$gcc_version_trigger%g
-s%@gcc_version@%$gcc_version%g
-s%@tooldir@%$tooldir%g
-s%@build_tooldir@%$build_tooldir%g
-s%@GDB_TK@%$GDB_TK%g
-s%@gxx_include_dir@%$gxx_include_dir%g
-s%@libstdcxx_incdir@%$libstdcxx_incdir%g
-s%@build_configargs@%$build_configargs%g
-s%@configure_build_modules@%$configure_build_modules%g
-s%@all_build_modules@%$all_build_modules%g
-s%@host_configargs@%$host_configargs%g
-s%@configdirs@%$configdirs%g
-s%@target_configargs@%$target_configargs%g
-s%@target_configdirs@%$target_configdirs%g
-s%@BISON@%$BISON%g
-s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g
-s%@LEX@%$LEX%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@YACC@%$YACC%g
-s%@config_shell@%$config_shell%g
-s%@AR@%$AR%g
-s%@ncn_cv_AR@%$ncn_cv_AR%g
-s%@AS@%$AS%g
-s%@ncn_cv_AS@%$ncn_cv_AS%g
-s%@DLLTOOL@%$DLLTOOL%g
-s%@ncn_cv_DLLTOOL@%$ncn_cv_DLLTOOL%g
-s%@LD@%$LD%g
-s%@ncn_cv_LD@%$ncn_cv_LD%g
-s%@NM@%$NM%g
-s%@ncn_cv_NM@%$ncn_cv_NM%g
-s%@RANLIB@%$RANLIB%g
-s%@ncn_cv_RANLIB@%$ncn_cv_RANLIB%g
-s%@WINDRES@%$WINDRES%g
-s%@ncn_cv_WINDRES@%$ncn_cv_WINDRES%g
-s%@OBJCOPY@%$OBJCOPY%g
-s%@ncn_cv_OBJCOPY@%$ncn_cv_OBJCOPY%g
-s%@OBJDUMP@%$OBJDUMP%g
-s%@ncn_cv_OBJDUMP@%$ncn_cv_OBJDUMP%g
-s%@CXX@%$CXX%g
-s%@CFLAGS_FOR_BUILD@%$CFLAGS_FOR_BUILD%g
-s%@CONFIGURED_AR_FOR_TARGET@%$CONFIGURED_AR_FOR_TARGET%g
-s%@ncn_cv_CONFIGURED_AR_FOR_TARGET@%$ncn_cv_CONFIGURED_AR_FOR_TARGET%g
-s%@CONFIGURED_AS_FOR_TARGET@%$CONFIGURED_AS_FOR_TARGET%g
-s%@ncn_cv_CONFIGURED_AS_FOR_TARGET@%$ncn_cv_CONFIGURED_AS_FOR_TARGET%g
-s%@CONFIGURED_DLLTOOL_FOR_TARGET@%$CONFIGURED_DLLTOOL_FOR_TARGET%g
-s%@ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET@%$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET%g
-s%@CONFIGURED_LD_FOR_TARGET@%$CONFIGURED_LD_FOR_TARGET%g
-s%@ncn_cv_CONFIGURED_LD_FOR_TARGET@%$ncn_cv_CONFIGURED_LD_FOR_TARGET%g
-s%@CONFIGURED_NM_FOR_TARGET@%$CONFIGURED_NM_FOR_TARGET%g
-s%@ncn_cv_CONFIGURED_NM_FOR_TARGET@%$ncn_cv_CONFIGURED_NM_FOR_TARGET%g
-s%@CONFIGURED_RANLIB_FOR_TARGET@%$CONFIGURED_RANLIB_FOR_TARGET%g
-s%@ncn_cv_CONFIGURED_RANLIB_FOR_TARGET@%$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET%g
-s%@CONFIGURED_WINDRES_FOR_TARGET@%$CONFIGURED_WINDRES_FOR_TARGET%g
-s%@ncn_cv_CONFIGURED_WINDRES_FOR_TARGET@%$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET%g
-s%@GCC_FOR_TARGET@%$GCC_FOR_TARGET%g
-s%@FLAGS_FOR_TARGET@%$FLAGS_FOR_TARGET%g
-s%@CC_FOR_TARGET@%$CC_FOR_TARGET%g
-s%@GCJ_FOR_TARGET@%$GCJ_FOR_TARGET%g
-s%@CXX_FOR_TARGET@%$CXX_FOR_TARGET%g
-s%@RAW_CXX_FOR_TARGET@%$RAW_CXX_FOR_TARGET%g
-s%@CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@%$CXX_FOR_TARGET_FOR_RECURSIVE_MAKE%g
-s%@RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@%$RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE%g
-s%@AR_FOR_TARGET@%$AR_FOR_TARGET%g
-s%@AS_FOR_TARGET@%$AS_FOR_TARGET%g
-s%@DLLTOOL_FOR_TARGET@%$DLLTOOL_FOR_TARGET%g
-s%@LD_FOR_TARGET@%$LD_FOR_TARGET%g
-s%@NM_FOR_TARGET@%$NM_FOR_TARGET%g
-s%@RANLIB_FOR_TARGET@%$RANLIB_FOR_TARGET%g
-s%@WINDRES_FOR_TARGET@%$WINDRES_FOR_TARGET%g
-s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-s%@MAINT@%$MAINT%g
-s%@stage1_cflags@%$stage1_cflags%g
-s%@stage2_werror_flag@%$stage2_werror_flag%g
-
+s,@ospace_frag@,,;t t
CEOF
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
- if test $ac_beg -gt 1; then
- sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
- else
- sed "${ac_end}q" conftest.subs > conftest.s$ac_file
- fi
- if test ! -s conftest.s$ac_file; then
- ac_more_lines=false
- rm -f conftest.s$ac_file
- else
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds="sed -f conftest.s$ac_file"
+_ACEOF
+
+ cat >>$CONFIG_STATUS <<\_ACEOF
+ # Split the substitutions into bite-sized pieces for seds with
+ # small command number limits, like on Digital OSF/1 and HP-UX.
+ ac_max_sed_lines=48
+ ac_sed_frag=1 # Number of current file.
+ ac_beg=1 # First line for current file.
+ ac_end=$ac_max_sed_lines # Line after last line for current file.
+ ac_more_lines=:
+ ac_sed_cmds=
+ while $ac_more_lines; do
+ if test $ac_beg -gt 1; then
+ sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+ else
+ sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+ fi
+ if test ! -s $tmp/subs.frag; then
+ ac_more_lines=false
else
- ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+ # The purpose of the label and of the branching condition is to
+ # speed up the sed processing (if there are no `@' at all, there
+ # is no need to browse any of the substitutions).
+ # These are the two extra sed commands mentioned above.
+ (echo ':t
+ /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
+ if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
+ else
+ ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
+ fi
+ ac_sed_frag=`expr $ac_sed_frag + 1`
+ ac_beg=$ac_end
+ ac_end=`expr $ac_end + $ac_max_sed_lines`
fi
- ac_file=`expr $ac_file + 1`
- ac_beg=$ac_end
- ac_end=`expr $ac_end + $ac_max_sed_cmds`
+ done
+ if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds=cat
fi
-done
-if test -z "$ac_sed_cmds"; then
- ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
+fi # test -n "$CONFIG_FILES"
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
# Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
- case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
- ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
- *) ac_file_in="${ac_file}.in" ;;
+ case $ac_file in
+ - | *:- | *:-:* ) # input from stdin
+ cat >$tmp/stdin
+ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ * ) ac_file_in=$ac_file.in ;;
esac
- # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
- # Remove last slash and all that follows it. Not all systems have dirname.
- ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
- if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
- # The file is in a subdirectory.
- test ! -d "$ac_dir" && mkdir "$ac_dir"
- ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
- # A "../" for each directory in $ac_dir_suffix.
- ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
+ # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
+ ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ { if $as_mkdir_p; then
+ mkdir -p "$ac_dir"
else
- ac_dir_suffix= ac_dots=
- fi
+ as_dir="$ac_dir"
+ as_dirs=
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ done
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+ { (exit 1); exit 1; }; }; }
+
+ ac_builddir=.
+
+if test "$ac_dir" != .; then
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+ ac_dir_suffix= ac_top_builddir=
+fi
- case "$ac_given_srcdir" in
- .) srcdir=.
- if test -z "$ac_dots"; then top_srcdir=.
- else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
- /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+case $srcdir in
+ .) # No --srcdir option. We are building in place.
+ ac_srcdir=.
+ if test -z "$ac_top_builddir"; then
+ ac_top_srcdir=.
+ else
+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+ fi ;;
+ [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir ;;
*) # Relative path.
- srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
- top_srcdir="$ac_dots$ac_given_srcdir" ;;
- esac
+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+ case "$ac_dir" in
+ .) ac_abs_builddir=`pwd`;;
+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+ *) ac_abs_builddir=`pwd`/"$ac_dir";;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+ case ${ac_top_builddir}. in
+ .) ac_abs_top_builddir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+ case $ac_srcdir in
+ .) ac_abs_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+ case $ac_top_srcdir in
+ .) ac_abs_top_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+ esac;;
+esac
- case "$ac_given_INSTALL" in
- [/$]*) INSTALL="$ac_given_INSTALL" ;;
- *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
- esac
- echo creating "$ac_file"
- rm -f "$ac_file"
- configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
- case "$ac_file" in
- *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
- *) ac_comsub= ;;
+ case $INSTALL in
+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+ *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
esac
- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
- sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
+ if test x"$ac_file" != x-; then
+ { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+ rm -f "$ac_file"
+ fi
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ if test x"$ac_file" = x-; then
+ configure_input=
+ else
+ configure_input="$ac_file. "
+ fi
+ configure_input=$configure_input"Generated from `echo $ac_file_in |
+ sed 's,.*/,,'` by configure."
+
+ # First look for the input files in the build tree, otherwise in the
+ # src tree.
+ ac_file_inputs=`IFS=:
+ for f in $ac_file_in; do
+ case $f in
+ -) echo $tmp/stdin ;;
+ [\\/$]*)
+ # Absolute (can't be DOS-style, as IFS=:)
+ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ echo "$f";;
+ *) # Relative
+ if test -f "$f"; then
+ # Build tree
+ echo "$f"
+ elif test -f "$srcdir/$f"; then
+ # Source tree
+ echo "$srcdir/$f"
+ else
+ # /dev/null tree
+ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ fi;;
+ esac
+ done` || { (exit 1); exit 1; }
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+ sed "$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s,@configure_input@,$configure_input,;t t
+s,@srcdir@,$ac_srcdir,;t t
+s,@abs_srcdir@,$ac_abs_srcdir,;t t
+s,@top_srcdir@,$ac_top_srcdir,;t t
+s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
+s,@builddir@,$ac_builddir,;t t
+s,@abs_builddir@,$ac_abs_builddir,;t t
+s,@top_builddir@,$ac_top_builddir,;t t
+s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
+s,@INSTALL@,$ac_INSTALL,;t t
+" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
+ rm -f $tmp/stdin
+ if test x"$ac_file" != x-; then
+ mv $tmp/out $ac_file
+ else
+ cat $tmp/out
+ rm -f $tmp/out
+ fi
-EOF
-cat >> $CONFIG_STATUS <<EOF
+done
+_ACEOF
-EOF
-cat >> $CONFIG_STATUS <<\EOF
+cat >>$CONFIG_STATUS <<\_ACEOF
-exit 0
-EOF
+{ (exit 0); exit 0; }
+_ACEOF
chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+ac_clean_files=$ac_clean_files_save
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded. So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status. When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+ ac_cs_success=:
+ ac_config_status_args=
+ test "$silent" = yes &&
+ ac_config_status_args="$ac_config_status_args --quiet"
+ exec 5>/dev/null
+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+ $ac_cs_success || { (exit 1); exit 1; }
+fi