### WARNING: this file contains embedded tabs. Do not run untabify on this file.
# Configuration script
-# Copyright (C) 1988, 90, 91, 92, 93, 94, 95, 96, 97, 98, 1999, 2000, 2001
-# Free Software Foundation, Inc.
+# Copyright (C) 1988, 90, 91, 92, 93, 94, 95, 96, 97, 98, 1999, 2000, 2001,
+# 2002 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
target_alias=NOTARGET
target_makefile_frag=
undefs=NOUNDEFS
-version="$Revision: 1.38 $"
+version="$Revision: 1.45 $"
x11=default
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
progname=$0
# if PWD already has a value, it is probably wrong.
-if [ -n "$PWD" ]; then PWD=`pwd`; fi
+if [ -n "$PWD" ]; then PWD=`${PWDCMD-pwd}`; fi
case "${progname}" in
/* | [A-Za-z]:[\\/]* ) ;;
*/*) ;;
*)
- PATH=$PATH:${PWD=`pwd`} ; export PATH
+ PATH=$PATH:${PWD=`${PWDCMD-pwd}`} ; export PATH
;;
esac
configsub=`echo ${progname} | sed 's/configure$/config.sub/'`
moveifchange=`echo ${progname} | sed 's/configure$/move-if-change/'`
## the sed command below emulates the dirname command
-topsrcdir=`cd \`echo ${progname} | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'\`; pwd`
+topsrcdir=`cd \`echo ${progname} | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'\`; ${PWDCMD-pwd}`
# this is a hack. sun4 must always be a valid host alias or this will fail.
echo "Invalid source directory ${srcdir}" >&2
exit 1
fi
- pwd=`pwd`
- srcpwd=`cd ${srcdir} ; pwd`
+ pwd=`${PWDCMD-pwd}`
+ srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}`
if [ "${pwd}" = "${srcpwd}" ] ; then
srcdir=.
fi
".") ;;
*)
if [ -f ${srcdir}/config.status ] ; then
- echo '***' Cannot configure here in \"${PWD=`pwd`}\" when \"${srcdir}\" is currently configured. 1>&2
+ echo '***' Cannot configure here in \"${PWD=`${PWDCMD-pwd}`}\" when \"${srcdir}\" is currently configured. 1>&2
exit 1
fi
esac
# some sanity checks on configure.in
case "${srctrigger}" in
"")
- echo '***' srctrigger not set in ${PWD=`pwd`}/configure.in. 1>&2
+ echo '***' srctrigger not set in ${PWD=`${PWDCMD-pwd}`}/configure.in. 1>&2
exit 1
;;
*) ;;
if [ ! -r ${srcdir}/${srctrigger} ] ; then
case "${srcdirdefaulted}" in
- "") echo '***' "${progname}: Can't find ${srcname} sources in ${PWD=`pwd`}/${srcdir}" 1>&2 ;;
- *) echo '***' "${progname}: Can't find ${srcname} sources in ${PWD=`pwd`}/. or ${PWD=`pwd`}/.." 1>&2 ;;
+ "") echo '***' "${progname}: Can't find ${srcname} sources in ${PWD=`${PWDCMD-pwd}`}/${srcdir}" 1>&2 ;;
+ *) echo '***' "${progname}: Can't find ${srcname} sources in ${PWD=`${PWDCMD-pwd}`}/. or ${PWD=`${PWDCMD-pwd}`}/.." 1>&2 ;;
esac
echo '***' \(At least ${srctrigger} is missing.\) 1>&2
tools="AR AR_FOR_TARGET AS AS_FOR_TARGET BISON CC_FOR_BUILD"
tools="${tools} CC_FOR_TARGET CXX_FOR_TARGET GCJ_FOR_TARGET"
- tools="${tools} DLLTOOL DLLTOOL_FOR_TARGET GCC_FOR_TARGET HOST_PREFIX"
- tools="${tools} HOST_PREFIX_1 LD LD_FOR_TARGET LEX MAKEINFO NM"
+ tools="${tools} DLLTOOL DLLTOOL_FOR_TARGET GCC_FOR_TARGET BUILD_PREFIX"
+ tools="${tools} BUILD_PREFIX_1 LD LD_FOR_TARGET LEX MAKEINFO NM"
tools="${tools} NM_FOR_TARGET RANLIB RANLIB_FOR_TARGET"
tools="${tools} WINDRES WINDRES_FOR_TARGET YACC"
tools="${tools} OBJCOPY OBJDUMP"
DLLTOOL=${DLLTOOL-${host_alias}-dlltool}
DLLTOOL_FOR_TARGET=${DLLTOOL_FOR_TARGET-${target_alias}-dlltool}
GCC_FOR_TARGET=${GCC_FOR_TARGET-${CC_FOR_TARGET-${target_alias}-gcc}}
- HOST_PREFIX=${build_alias}-
- HOST_PREFIX_1=${build_alias}-
+ BUILD_PREFIX=${build_alias}-
+ BUILD_PREFIX_1=${build_alias}-
LD=${LD-${host_alias}-ld}
LD_FOR_TARGET=${LD_FOR_TARGET-${target_alias}-ld}
MAKEINFO=${MAKEINFO-makeinfo}
export CFLAGS
export CXXFLAGS
-# FIXME: This should be in configure.in, not configure
-case "$host" in
- *go32*)
- enable_gdbtk=no ;;
- *msdosdjgpp*)
- enable_gdbtk=no ;;
-esac
-
-# FIXME: This should be in configure.in, not configure
-# Determine whether gdb needs tk/tcl or not.
-if [ "$enable_gdbtk" != "no" ]; then
- GDB_TK="all-tcl all-tk all-itcl all-tix all-libgui"
-else
- GDB_TK=""
-fi
-
all_build_modules=
if test x"${build_alias}" != x"${host_alias}"
then
if mkdir ${subdir} ; then
true
else
- echo '***' "${progname}: could not make ${PWD=`pwd`}/${subdir}" 1>&2
+ echo '***' "${progname}: could not make ${PWD=`${PWDCMD-pwd}`}/${subdir}" 1>&2
exit 1
fi
fi
sed -e "/^####/ r ${package_makefile_rules_frag}" ${srcdir}/${subdir}/${Makefile_in} > ${Makefile}.tem
else
echo '***' Expected package makefile rules fragment \"${package_makefile_rules_frag}\" 1>&2
- echo '***' is missing in ${PWD=`pwd`}. 1>&2
+ echo '***' is missing in ${PWD=`${PWDCMD-pwd}`}. 1>&2
cp ${srcdir}/${subdir}/${Makefile_in} ${subdir}/Makefile.tem
fi
esac
sed -e "/^####/ r ${host_makefile_frag}" ${Makefile} > ${subdir}/Makefile.tem
else
echo '***' Expected host makefile fragment \"${host_makefile_frag}\" 1>&2
- echo '***' is missing in ${PWD=`pwd`}. 1>&2
+ echo '***' is missing in ${PWD=`${PWDCMD-pwd}`}. 1>&2
mv ${Makefile} ${subdir}/Makefile.tem
fi
esac
sed -e "/^####/ r ${package_makefile_frag}" ${Makefile} > ${subdir}/Makefile.tem
else
echo '***' Expected package makefile fragment \"${package_makefile_rules_frag}\" 1>&2
- echo '***' is missing in ${PWD=`pwd`}. 1>&2
+ echo '***' is missing in ${PWD=`${PWDCMD-pwd}`}. 1>&2
mv ${Makefile} ${subdir}/Makefile.tem
fi
esac
# remove any form feeds.
if [ -z "${subdirs}" ]; then
rm -f ${subdir}/Makefile.tm2
- sed -e "s:^SUBDIRS[ ]*=.*$:SUBDIRS = ${configdirs}:" \
- -e "s:^NONSUBDIRS[ ]*=.*$:NONSUBDIRS = ${noconfigdirs}:" \
+ sedtemp=sed.$$
+ cat >$sedtemp <<EOF
+s:^SUBDIRS[ ]*=.*$:SUBDIRS = ${configdirs}:
+s:^NONSUBDIRS[ ]*=.*$:NONSUBDIRS = ${noconfigdirs}:
+EOF
+ sed -f $sedtemp \
${subdir}/Makefile.tem > ${subdir}/Makefile.tm2
+ rm -f $sedtemp
rm -f ${subdir}/Makefile.tem
mv ${subdir}/Makefile.tm2 ${subdir}/Makefile.tem
fi
newusing=`echo "${using}" | sed 's/and/using/'`
using=${newusing}
- echo "Created \"${Makefile}\" in" ${PWD=`pwd`} ${using}
+ echo "Created \"${Makefile}\" in" ${PWD=`${PWDCMD-pwd}`} ${using}
. ${tmpfile}.pos
if mkdir ./${bld_dir} ; then
true
else
- echo '***' "${progname}: could not make ${PWD=`pwd`}/${bld_dir}" 1>&2
+ echo '***' "${progname}: could not make ${PWD=`${PWDCMD-pwd}`}/${bld_dir}" 1>&2
exit 1
fi
fi
;;
esac
- POPDIR=${PWD=`pwd`}
+ POPDIR=${PWD=`${PWDCMD-pwd}`}
cd ${bld_dir}
### figure out what to do with srcdir
${srcdiroption} ${diroptions} ${program_prefixoption} ${program_suffixoption} ${program_transform_nameoption} ${site_option} ${withoptions} ${withoutoptions} ${enableoptions} ${disableoptions} ${floating_pointoption} ${cache_file_option} ${removing} ${other_options} ${redirect} ; then
true
else
- echo Configure in `pwd` failed, exiting. 1>&2
+ echo Configure in `${PWDCMD-pwd}` failed, exiting. 1>&2
exit 1
fi
fi