DLLTOOL_FOR_TARGET
AS_FOR_TARGET
AR_FOR_TARGET
+GOC_FOR_TARGET
GFORTRAN_FOR_TARGET
GCJ_FOR_TARGET
GCC_FOR_TARGET
NM_FOR_BUILD
LD_FOR_BUILD
LDFLAGS_FOR_BUILD
+GOC_FOR_BUILD
GFORTRAN_FOR_BUILD
GCJ_FOR_BUILD
DLLTOOL_FOR_BUILD
enable_option_checking
with_build_libsubdir
enable_gold
+enable_ld
+enable_libquadmath
+enable_libquadmath_support
enable_libada
enable_libssp
enable_build_with_cxx
GCC_FOR_TARGET
GCJ_FOR_TARGET
GFORTRAN_FOR_TARGET
+GOC_FOR_TARGET
AR_FOR_TARGET
AS_FOR_TARGET
DLLTOOL_FOR_TARGET
--disable-option-checking ignore unrecognized --enable/--with options
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --enable-gold[=ARG] build gold [ARG={both}[/{gold,ld}]]
+ --enable-gold[=ARG] build gold [ARG={default,yes,no}]
+ --enable-ld[=ARG] build ld [ARG={default,yes,no}]
+ --disable-libquadmath do not build libquadmath directory
+ --disable-libquadmath-support
+ disable libquadmath support for Fortran
--enable-libada build libada directory
--enable-libssp build libssp directory
--enable-build-with-cxx build with C++ compiler instead of C compiler
--disable-ppl-version-check disable check for PPL version
- --enable-cloog-backend=backend
- isl: The cloog.org isl backend
- ppl-legacy: The legacy ppl backend - default
- ppl: The cloog.org ppl backend
+ --enable-cloog-backend[=BACKEND]
+ set the CLooG BACKEND used to either isl, ppl or
+ ppl-legacy (default)
--disable-cloog-version-check
disable check for CLooG version
--enable-lto enable link time optimization support
GCJ for the target
GFORTRAN_FOR_TARGET
GFORTRAN for the target
+ GOC_FOR_TARGET
+ GOC for the target
AR_FOR_TARGET
AR for the target
AS_FOR_TARGET
target-libstdc++-v3 \
target-libmudflap \
target-libssp \
+ target-libquadmath \
target-libgfortran \
target-boehm-gc \
${libgcj} \
target-libobjc \
- target-libada"
+ target-libada \
+ target-libgo"
# these tools are built using the target libraries, and are intended to
# run only in the target environment
yes) skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` ;;
esac
-# Handle --enable-gold.
-# --enable-gold Build only gold
-# --disable-gold [default] Build only ld
-# --enable-gold=both Build both gold and ld, ld is default
-# --enable-gold=both/ld Same
-# --enable-gold=both/gold Build both gold and ld, gold is default, ld is renamed ld.bfd
-
+# Handle --enable-gold, --enable-ld.
+# --disable-gold [--enable-ld]
+# Build only ld. Default option.
+# --enable-gold [--enable-ld]
+# Build both gold and ld. Install gold as "ld.gold", install ld
+# as "ld.bfd" and "ld".
+# --enable-gold=default [--enable-ld]
+# Build both gold and ld. Install gold as "ld.gold" and "ld",
+# install ld as "ld.bfd".
+# --enable-gold[=default] --disable-ld
+# Build only gold, which is then installed as both "ld.gold" and "ld".
+# --enable-gold --enable-ld=default
+# Build both gold (installed as "ld.gold") and ld (installed as "ld"
+# and ld.bfd).
+# In other words, ld is default
+# --enable-gold=default --enable-ld=default
+# Error.
+
+default_ld=
# Check whether --enable-gold was given.
if test "${enable_gold+set}" = set; then :
enableval=$enable_gold; ENABLE_GOLD=$enableval
ENABLE_GOLD=no
fi
- case "${ENABLE_GOLD}" in
- yes|both|both/gold|both/ld)
+case "${ENABLE_GOLD}" in
+ yes|default)
# Check for ELF target.
is_elf=no
case "${target}" in
# Check for target supported by gold.
case "${target}" in
i?86-*-* | x86_64-*-* | sparc*-*-* | powerpc*-*-* | arm*-*-*)
- case "${ENABLE_GOLD}" in
- both*)
- configdirs="$configdirs gold"
- ;;
- *)
- configdirs=`echo " ${configdirs} " | sed -e 's/ ld / gold /'`
- ;;
- esac
+ configdirs="$configdirs gold"
+ if test x${ENABLE_GOLD} = xdefault; then
+ default_ld=gold
+ fi
ENABLE_GOLD=yes
;;
esac
*)
as_fn_error "invalid --enable-gold argument" "$LINENO" 5
;;
- esac
+esac
+
+# Check whether --enable-ld was given.
+if test "${enable_ld+set}" = set; then :
+ enableval=$enable_ld; ENABLE_LD=$enableval
+else
+ ENABLE_LD=yes
+fi
+
+
+case "${ENABLE_LD}" in
+ default)
+ if test x${default_ld} != x; then
+ as_fn_error "either gold or ld can be the default ld" "$LINENO" 5
+ fi
+ ;;
+ yes)
+ ;;
+ no)
+ if test x${ENABLE_GOLD} != xyes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: neither ld nor gold are enabled" >&5
+$as_echo "$as_me: WARNING: neither ld nor gold are enabled" >&2;}
+ fi
+ configdirs=`echo " ${configdirs} " | sed -e 's/ ld / /'`
+ ;;
+ *)
+ as_fn_error "invalid --enable-ld argument" "$LINENO" 5
+ ;;
+esac
# Configure extra directories which are host specific
esac
+# Check whether --enable-libquadmath was given.
+if test "${enable_libquadmath+set}" = set; then :
+ enableval=$enable_libquadmath; ENABLE_LIBQUADMATH=$enableval
+else
+ ENABLE_LIBQUADMATH=yes
+fi
+
+if test "${ENABLE_LIBQUADMATH}" = "no" ; then
+ noconfigdirs="$noconfigdirs target-libquadmath"
+fi
+
+
+# Check whether --enable-libquadmath-support was given.
+if test "${enable_libquadmath_support+set}" = set; then :
+ enableval=$enable_libquadmath_support; ENABLE_LIBQUADMATH_SUPPORT=$enableval
+else
+ ENABLE_LIBQUADMATH_SUPPORT=yes
+fi
+
+enable_libquadmath_support=
+if test "${ENABLE_LIBQUADMATH_SUPPORT}" = "no" ; then
+ enable_libquadmath_support=no
+fi
+
+
# Check whether --enable-libada was given.
if test "${enable_libada+set}" = set; then :
enableval=$enable_libada; ENABLE_LIBADA=$enableval
;;
no)
# Make sure we get it printed in the list of not supported target libs.
- noconfigdirs="$noconfigdirs ${libgcj}"
+ # Don't disable libffi, though, other languages use it.
+ noconfigdirs="$noconfigdirs `echo ${libgcj} | sed -e 's/target-libffi//'`"
+ # Clear libgcj_saved so that even if java is enabled libffi won't be
+ # built.
+ libgcj_saved=
;;
esac
;;
bfin-*-*)
unsupported_languages="$unsupported_languages java"
- noconfigdirs="$noconfigdirs target-boehm-gc gdb"
+ noconfigdirs="$noconfigdirs target-boehm-gc"
if test x${is_cross_compiler} != xno ; then
target_configdirs="${target_configdirs} target-bsp target-cygmon"
fi
*-*-aout)
unsupported_languages="$unsupported_languages fortran"
noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
- *-*-elf)
- noconfigdirs="$noconfigdirs target-boehm-gc";;
+ *-*-elf) # See PR46792 regarding target-libffi.
+ noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
*-*-linux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss";;
*)
noconfigdirs="$noconfigdirs readline mmalloc libgui itcl gdb"
;;
ia64*-**-hpux*)
- # No gdb or ld support yet.
- noconfigdirs="$noconfigdirs ${libgcj} readline mmalloc libgui itcl gdb ld"
+ # No ld support yet.
+ noconfigdirs="$noconfigdirs ${libgcj} libgui itcl ld"
;;
ia64*-*-*vms*)
# No gdb or ld support yet.
mt-*-*)
noconfigdirs="$noconfigdirs sim"
;;
+ picochip-*-*)
+ noconfigdirs="$noconfigdirs target-libiberty"
+ ;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp target-newlib ${libgcj}"
CXX_FOR_BUILD=${CXX_FOR_BUILD-g++}
GCJ_FOR_BUILD=${GCJ_FOR_BUILD-gcj}
GFORTRAN_FOR_BUILD=${GFORTRAN_FOR_BUILD-gfortran}
+ GOC_FOR_BUILD=${GOC_FOR_BUILD-gccgo}
DLLTOOL_FOR_BUILD=${DLLTOOL_FOR_BUILD-dlltool}
LD_FOR_BUILD=${LD_FOR_BUILD-ld}
NM_FOR_BUILD=${NM_FOR_BUILD-nm}
CXX_FOR_BUILD="\$(CXX)"
GCJ_FOR_BUILD="\$(GCJ)"
GFORTRAN_FOR_BUILD="\$(GFORTRAN)"
+ GOC_FOR_BUILD="\$(GOC)"
DLLTOOL_FOR_BUILD="\$(DLLTOOL)"
LD_FOR_BUILD="\$(LD)"
NM_FOR_BUILD="\$(NM)"
fi
-# Check whether --with-mpc_include was given.
+# Check whether --with-mpc-include was given.
if test "${with_mpc_include+set}" = set; then :
withval=$with_mpc_include;
fi
-# Check whether --with-mpc_lib was given.
+# Check whether --with-mpc-lib was given.
if test "${with_mpc_lib+set}" = set; then :
withval=$with_mpc_lib;
fi
fi
-# Check whether --with-mpfr_include was given.
+# Check whether --with-mpfr-include was given.
if test "${with_mpfr_include+set}" = set; then :
withval=$with_mpfr_include;
fi
-# Check whether --with-mpfr_lib was given.
+# Check whether --with-mpfr-lib was given.
if test "${with_mpfr_lib+set}" = set; then :
withval=$with_mpfr_lib;
fi
fi
-# Check whether --with-gmp_include was given.
+# Check whether --with-gmp-include was given.
if test "${with_gmp_include+set}" = set; then :
withval=$with_gmp_include;
fi
-# Check whether --with-gmp_lib was given.
+# Check whether --with-gmp-lib was given.
if test "${with_gmp_lib+set}" = set; then :
withval=$with_gmp_lib;
fi
fi
else
poststage1_ldflags=
- # With --enable-build-with-cxx, default to linking libstdc++ and
- # libgcc statically. But if the user explicitly specified the
- # libraries to use, trust that they are doing what they want.
- if test "$ENABLE_BUILD_WITH_CXX" = "yes" -a "$poststage1_libs" = ""; then
+ # In stages 2 and 3, default to linking libstdc++ and libgcc
+ # statically. But if the user explicitly specified the libraries to
+ # use, trust that they are doing what they want.
+ if test "$poststage1_libs" = ""; then
poststage1_ldflags="-static-libstdc++ -static-libgcc"
fi
fi
fi
-# Check whether --with-ppl_include was given.
+# Check whether --with-ppl-include was given.
if test "${with_ppl_include+set}" = set; then :
withval=$with_ppl_include;
fi
-# Check whether --with-ppl_lib was given.
+# Check whether --with-ppl-lib was given.
if test "${with_ppl_lib+set}" = set; then :
withval=$with_ppl_lib;
fi
fi
-# Check whether --with-cloog_include was given.
+# Check whether --with-cloog-include was given.
if test "${with_cloog_include+set}" = set; then :
withval=$with_cloog_include;
fi
-# Check whether --with-cloog_lib was given.
+# Check whether --with-cloog-lib was given.
if test "${with_cloog_lib+set}" = set; then :
withval=$with_cloog_lib;
fi
# an apparent bug in bash 1.12 on linux.
${srcdir}/gcc/[*]/config-lang.in) ;;
*)
- # From the config-lang.in, get $language, $lang_requires
+ # From the config-lang.in, get $language, $lang_requires, and
+ # $lang_requires_boot_languages.
language=
lang_requires=
+ lang_requires_boot_languages=
. ${lang_frag}
- for other in ${lang_requires} ; do
+ for other in ${lang_requires} ${lang_requires_boot_languages}; do
case ,${enable_languages}, in
*,$other,*) ;;
*,all,*) ;;
;;
esac
done
+ for other in ${lang_requires_boot_languages} ; do
+ if test "$other" != "c"; then
+ case ,${enable_stage1_languages}, in
+ *,$other,*) ;;
+ *,all,*) ;;
+ *)
+ case ,${enable_languages}, in
+ *,$language,*)
+ echo " '$other' language required by '$language' in stage 1; enabling" 1>&2
+ enable_stage1_languages="$enable_stage1_languages,${other}"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ done
;;
esac
done
missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ `
potential_languages=,c,
+ enabled_target_libs=
+ disabled_target_libs=
+
for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
case ${lang_frag} in
..) ;;
case $add_this_lang in
unsupported)
# Remove language-dependent dirs.
- eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
+ disabled_target_libs="$disabled_target_libs $target_libs"
+ noconfigdirs="$noconfigdirs $lang_dirs"
;;
no)
# Remove language-dependent dirs; still show language as supported.
- eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
+ disabled_target_libs="$disabled_target_libs $target_libs"
+ noconfigdirs="$noconfigdirs $lang_dirs"
potential_languages="${potential_languages}${language},"
;;
yes)
new_enable_languages="${new_enable_languages}${language},"
potential_languages="${potential_languages}${language},"
missing_languages=`echo "$missing_languages" | sed "s/,$language,/,/"`
+ enabled_target_libs="$enabled_target_libs $target_libs"
case "${boot_language}:,$enable_stage1_languages," in
yes:* | *:*,$language,* | *:*,yes, | *:*,all,)
# Add to (comma-separated) list of stage 1 languages.
esac
done
+ # Add target libraries which are only needed for disabled languages
+ # to noconfigdirs.
+ if test -n "$disabled_target_libs"; then
+ for dir in $disabled_target_libs; do
+ case " $enabled_target_libs " in
+ *" ${dir} "*) ;;
+ *) noconfigdirs="$noconfigdirs $dir" ;;
+ esac
+ done
+ fi
+
# Check whether --enable-stage1-languages was given.
if test "${enable_stage1_languages+set}" = set; then :
enableval=$enable_stage1_languages; case ,${enable_stage1_languages}, in
+
# Generate default definitions for YACC, M4, LEX and other programs that run
# on the build machine. These are used if the Makefile can't locate these
# programs in objdir.
+if test -n "$GOC_FOR_TARGET"; then
+ ac_cv_prog_GOC_FOR_TARGET=$GOC_FOR_TARGET
+elif test -n "$ac_cv_prog_GOC_FOR_TARGET"; then
+ GOC_FOR_TARGET=$ac_cv_prog_GOC_FOR_TARGET
+fi
+
+if test -n "$ac_cv_prog_GOC_FOR_TARGET"; then
+ for ncn_progname in gccgo; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_GOC_FOR_TARGET+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$GOC_FOR_TARGET"; then
+ ac_cv_prog_GOC_FOR_TARGET="$GOC_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_GOC_FOR_TARGET="${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+GOC_FOR_TARGET=$ac_cv_prog_GOC_FOR_TARGET
+if test -n "$GOC_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GOC_FOR_TARGET" >&5
+$as_echo "$GOC_FOR_TARGET" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ done
+fi
+
+if test -z "$ac_cv_prog_GOC_FOR_TARGET" && test -n "$with_build_time_tools"; then
+ for ncn_progname in gccgo; do
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ncn_progname} in $with_build_time_tools" >&5
+$as_echo_n "checking for ${ncn_progname} in $with_build_time_tools... " >&6; }
+ if test -x $with_build_time_tools/${ncn_progname}; then
+ ac_cv_prog_GOC_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ break
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_GOC_FOR_TARGET"; then
+ for ncn_progname in gccgo; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_GOC_FOR_TARGET+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$GOC_FOR_TARGET"; then
+ ac_cv_prog_GOC_FOR_TARGET="$GOC_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_GOC_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+GOC_FOR_TARGET=$ac_cv_prog_GOC_FOR_TARGET
+if test -n "$GOC_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GOC_FOR_TARGET" >&5
+$as_echo "$GOC_FOR_TARGET" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+ if test -z "$ac_cv_prog_GOC_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_GOC_FOR_TARGET+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$GOC_FOR_TARGET"; then
+ ac_cv_prog_GOC_FOR_TARGET="$GOC_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_GOC_FOR_TARGET="${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+GOC_FOR_TARGET=$ac_cv_prog_GOC_FOR_TARGET
+if test -n "$GOC_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GOC_FOR_TARGET" >&5
+$as_echo "$GOC_FOR_TARGET" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+ test -n "$ac_cv_prog_GOC_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_GOC_FOR_TARGET" ; then
+ set dummy gccgo
+ if test $build = $target ; then
+ GOC_FOR_TARGET="$2"
+ else
+ GOC_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+else
+ GOC_FOR_TARGET="$ac_cv_prog_GOC_FOR_TARGET"
+fi
+
+
+
cat > conftest.c << \EOF
#ifdef __GNUC__
gcc_yay;
esac
if test $ok = yes; then
# An in-tree tool is available and we can use it
- CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
+ CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `if test -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags; then $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes; else echo -funconfigured-libstdc++-v3 ; fi` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: just compiled" >&5
$as_echo "just compiled" >&6; }
elif expr "x$CXX_FOR_TARGET" : "x/" > /dev/null; then
fi
fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking where to find the target gccgo" >&5
+$as_echo_n "checking where to find the target gccgo... " >&6; }
+if test "x${build}" != "x${host}" ; then
+ if expr "x$GOC_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ ac_dir=`dirname $GOC_FOR_TARGET`
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
+$as_echo "pre-installed in $ac_dir" >&6; }
+ else
+ # Canadian cross, just use what we found
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
+$as_echo "pre-installed" >&6; }
+ fi
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" gcc "*) ;;
+ *) ok=no ;;
+ esac
+ case ,${enable_languages}, in
+ *,go,*) ;;
+ *) ok=no ;;
+ esac
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ GOC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gccgo -B$$r/$(HOST_SUBDIR)/gcc/'
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: just compiled" >&5
+$as_echo "just compiled" >&6; }
+ elif expr "x$GOC_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ ac_dir=`dirname $GOC_FOR_TARGET`
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
+$as_echo "pre-installed in $ac_dir" >&6; }
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ GOC_FOR_TARGET='$(GOC)'
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: host tool" >&5
+$as_echo "host tool" >&6; }
+ else
+ # We need a cross tool
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
+$as_echo "pre-installed" >&6; }
+ fi
+fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking where to find the target ld" >&5
$as_echo_n "checking where to find the target ld... " >&6; }
if test "x${build}" != "x${host}" ; then
if test $ok = yes; then
# An in-tree tool is available and we can use it
- STRIP_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/strip'
+ STRIP_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/strip-new'
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: just compiled" >&5
$as_echo "just compiled" >&6; }
elif expr "x$STRIP_FOR_TARGET" : "x/" > /dev/null; then
OSDN Git Service
