# these libraries are built for the target environment, and are built after
# the host libraries and the host tools (which may be a cross compiler)
-#
+# Note that libiberty is not a target library.
target_libraries="target-libgcc \
- target-libiberty \
target-libgloss \
target-newlib \
target-libgomp \
;;
*-*-kaos*)
# Remove unsupported stuff on all kaOS configurations.
- skipdirs="target-libiberty ${libgcj} target-libstdc++-v3 target-librx"
+ skipdirs="${libgcj} target-libstdc++-v3 target-librx"
skipdirs="$skipdirs target-libobjc target-examples target-groff target-gperf"
skipdirs="$skipdirs zlib fastjar target-libjava target-boehm-gc target-zlib"
noconfigdirs="$noconfigdirs target-libgloss"
;;
*-*-netbsd*)
# Skip some stuff on all NetBSD configurations.
- noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
# Skip some stuff that's unsupported on some NetBSD configurations.
case "${target}" in
esac
;;
*-*-netware*)
- noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss ${libgcj} target-libmudflap"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj} target-libmudflap"
;;
*-*-rtems*)
- skipdirs="${skipdirs} target-libiberty"
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
# The tpf target doesn't support gdb yet.
*-*-tpf*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty ${libgcj} target-libmudflap gdb tcl tk libgui itcl"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj} target-libmudflap gdb tcl tk libgui itcl"
;;
*-*-uclinux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss target-rda ${libgcj}"
;;
*-*-vxworks*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty target-libstdc++-v3 ${libgcj}"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libstdc++-v3 ${libgcj}"
;;
alpha*-dec-osf*)
# ld works, but does not support shared libraries.
sh*-*-pe|mips*-*-pe|*arm-wince-pe)
noconfigdirs="$noconfigdirs ${libgcj}"
noconfigdirs="$noconfigdirs target-examples"
- noconfigdirs="$noconfigdirs target-libiberty texinfo send-pr"
+ noconfigdirs="$noconfigdirs texinfo send-pr"
noconfigdirs="$noconfigdirs tcl tk itcl libgui sim"
noconfigdirs="$noconfigdirs expect dejagnu"
# the C++ libraries don't build on top of CE's C libraries
libgloss_dir=arm
;;
arm*-*-symbianelf*)
- noconfigdirs="$noconfigdirs ${libgcj} target-libiberty"
+ noconfigdirs="$noconfigdirs ${libgcj}"
libgloss_dir=arm
;;
arm-*-pe*)
noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
;;
avr-*-*)
- noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj} target-libssp"
+ noconfigdirs="$noconfigdirs target-libstdc++-v3 ${libgcj} target-libssp"
;;
bfin-*-*)
unsupported_languages="$unsupported_languages java"
noconfigdirs="$noconfigdirs ${libgcj}"
;;
m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
- noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libstdc++-v3 ${libgcj}"
libgloss_dir=m68hc11
;;
m68k-*-elf*)
mt-*-*)
noconfigdirs="$noconfigdirs sim"
;;
- picochip-*-*)
- noconfigdirs="$noconfigdirs target-libiberty"
- ;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp target-newlib ${libgcj}"
noconfigdirs="$noconfigdirs gprof target-libssp ${libgcj}"
;;
mips*-sde-elf*)
- skipdirs="$skipdirs target-libiberty"
noconfigdirs="$noconfigdirs ${libgcj}"
if test x$with_newlib = xyes; then
noconfigdirs="$noconfigdirs gprof"
noconfigdirs="$noconfigdirs ${libgcj}"
;;
ip2k-*-*)
- noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libstdc++-v3 ${libgcj}"
;;
*-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acx_cv_cc_gcc_supports_ada" >&5
$as_echo "$acx_cv_cc_gcc_supports_ada" >&6; }
-if test x$GNATBIND != xno && test x$GNATMAKE != xno && test x$acx_cv_cc_gcc_supports_ada != xno; then
+if test "x$GNATBIND" != xno && test "x$GNATMAKE" != xno && test x$acx_cv_cc_gcc_supports_ada != xno; then
have_gnat=yes
else
have_gnat=no
# Check for PPL
-ppllibs=" -lppl_c -lppl -lgmpxx"
+ppllibs=
pplinc=
+pwllib=
# Check whether --with-ppl was given.
fi
+# Check whether --enable-ppl-version-check was given.
+if test "${enable_ppl_version_check+set}" = set; then :
+ enableval=$enable_ppl_version_check;
+fi
+
+
case $with_ppl in
- no)
- ppllibs=
- ;;
- "" | yes)
+ yes | no | "")
;;
*)
- ppllibs="-L$with_ppl/lib -lppl_c -lppl -lgmpxx"
+ ppllibs="-L$with_ppl/lib"
pplinc="-I$with_ppl/include $pplinc"
+ if test -d "$with_ppl/lib" && test -d "$with_ppl/include"; then
+ with_ppl=yes
+ else
+ as_fn_error "cannot find directories \"$with_ppl/lib\" or \"$with_ppl/include\"" "$LINENO" 5
+ fi
;;
esac
-if test "x$with_ppl_include" != x; then
+
+if test x"$with_ppl_include" != x; then
pplinc="-I$with_ppl_include $pplinc"
+ with_ppl=yes
fi
+
if test "x$with_ppl_lib" != x; then
- ppllibs="-L$with_ppl_lib -lppl_c -lppl -lgmpxx"
+ ppllibs="-L$with_ppl_lib"
+ with_ppl=yes
fi
-if test "x$with_ppl$with_ppl_include$with_ppl_lib" = x && test -d ${srcdir}/ppl; then
- ppllibs='-L$$r/$(HOST_SUBDIR)/ppl/interfaces/C/'"$lt_cv_objdir"' -L$$r/$(HOST_SUBDIR)/ppl/src/'"$lt_cv_objdir"' -lppl_c -lppl -lgmpxx '
+
+if test x"$with_ppl$with_ppl_include$with_ppl_lib" = x && test -d ${srcdir}/ppl; then
+ if test x"$enable_watchdog" = xyes; then
+ pwllib="-lpwl"
+ fi
+ ppllibs='-L$$r/$(HOST_SUBDIR)/ppl/interfaces/C/'"$lt_cv_objdir"' -L$$r/$(HOST_SUBDIR)/ppl/src/'"$lt_cv_objdir"
pplinc='-I$$r/$(HOST_SUBDIR)/ppl/src -I$$r/$(HOST_SUBDIR)/ppl/interfaces/C '
enable_ppl_version_check=no
+ with_ppl=yes
fi
-# Check whether --enable-ppl-version-check was given.
-if test "${enable_ppl_version_check+set}" = set; then :
- enableval=$enable_ppl_version_check; ENABLE_PPL_CHECK=$enableval
+if test "x$with_ppl" != xno; then
+ if test "x$pwllib" = x; then
+ saved_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $ppllibs"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for PWL_handle_timeout in -lpwl" >&5
+$as_echo_n "checking for PWL_handle_timeout in -lpwl... " >&6; }
+if test "${ac_cv_lib_pwl_PWL_handle_timeout+set}" = set; then :
+ $as_echo_n "(cached) " >&6
else
- ENABLE_PPL_CHECK=yes
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lpwl $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char PWL_handle_timeout ();
+int
+main ()
+{
+return PWL_handle_timeout ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_pwl_PWL_handle_timeout=yes
+else
+ ac_cv_lib_pwl_PWL_handle_timeout=no
fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pwl_PWL_handle_timeout" >&5
+$as_echo "$ac_cv_lib_pwl_PWL_handle_timeout" >&6; }
+if test "x$ac_cv_lib_pwl_PWL_handle_timeout" = x""yes; then :
+ pwllib="-lpwl"
+fi
+
+ LDFLAGS="$saved_LDFLAGS"
+ fi
+ ppllibs="$ppllibs -lppl_c -lppl $pwllib -lgmpxx"
-if test "x$with_ppl" != "xno" -a "${ENABLE_PPL_CHECK}" = "yes"; then
- saved_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS $pplinc $gmpinc"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for version 0.11 (or later revision) of PPL" >&5
-$as_echo_n "checking for version 0.11 (or later revision) of PPL... " >&6; }
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ if test "$enable_ppl_version_check" != no; then
+ saved_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $pplinc $gmpinc"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for version 0.11 (revision 0 or later) of PPL" >&5
+$as_echo_n "checking for version 0.11 (revision 0 or later) of PPL... " >&6; }
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include "ppl_c.h"
int
main ()
{
- #if PPL_VERSION_MAJOR != 0 || PPL_VERSION_MINOR < 11
- choke me
- #endif
+ #if PPL_VERSION_MAJOR != 0 || PPL_VERSION_MINOR < 11
+ choke me
+ #endif
;
return 0;
$as_echo "no" >&6; }; ppllibs= ; pplinc= ; with_ppl=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- CFLAGS="$saved_CFLAGS"
+ CFLAGS="$saved_CFLAGS"
+ fi
fi
# Flags needed for PPL
if test "x$with_ppl" = "xno"; then
+
+
+
+ if test "x${with_cloog}" = xno; then
+ graphite_requested=no
+ elif test "x${with_cloog}" != x \
+ || test "x${with_cloog_include}" != x \
+ || test "x${with_cloog_lib}" != x ; then
+ graphite_requested=yes
+ else
+ graphite_requested=no
+ fi
+
+
+ if test "${graphite_requested}" = yes; then
+ as_fn_error "Unable to find a usable PPL. See config.log for details." "$LINENO" 5
+ fi
with_cloog=no
fi
if test "x${with_cloog}" = x && test "x${with_cloog_include}" = x \
;;
"ISL")
clooginc="${clooginc} ${_cloogorginc}"
- clooglibs="${clooglibs} -lcloog-isl"
+ clooglibs="${clooglibs} -lcloog-isl -lisl"
cloog_org=yes
;;
"PPL")
- if test "x${with_cloog}" != x \
+ if test "x${with_cloog}" = xno; then
+ graphite_requested=no
+ elif test "x${with_cloog}" != x \
|| test "x${with_cloog_include}" != x \
|| test "x${with_cloog_lib}" != x ; then
graphite_requested=yes
&& test "x${clooglibs}" = x \
&& test "x${clooginc}" = x ; then
- as_fn_error "Unable to find a usable CLooG. See config.log for details." "$LINENO" 5
+ as_fn_error "Unable to find a usable CLooG. See config.log for details." "$LINENO" 5
fi
else
if test x"$default_enable_lto" = x"yes" ; then
case $target in
- *-apple-darwin* | *-cygwin* | *-mingw*) ;;
+ *-apple-darwin9 | *-cygwin* | *-mingw*) ;;
# On other non-ELF platforms, LTO has yet to be validated.
*) enable_lto=no ;;
esac
fi
done
-# Sometimes the tools are distributed with libiberty but with no other
-# libraries. In that case, we don't want to build target-libiberty.
-# Don't let libgcc imply libiberty either.
-if test -n "${target_configdirs}" ; then
- libgcc=
- others=
- for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
- if test "$i" = "libgcc"; then
- libgcc=target-libgcc
- elif test "$i" != "libiberty" ; then
- if test -r $srcdir/$i/configure ; then
- others=yes;
- break;
- fi
- fi
- done
- if test -z "${others}" ; then
- target_configdirs=$libgcc
- fi
-fi
-
# Quietly strip out all directories which aren't configurable in this tree.
# This relies on all configurable subdirectories being autoconfiscated, which
# is now the case.
extra_arflags_for_target=" -X32_64"
extra_nmflags_for_target=" -B -X32_64"
;;
- *-*-darwin[3-9]*)
- # ranlib before Darwin10 requires the -c flag to look at common symbols.
- extra_ranlibflags_for_target=" -c"
- ;;
mips*-*-pe | sh*-*-pe | *arm-wince-pe)
target_makefile_frag="config/mt-wince"
;;
# Also strip program-prefix, program-suffix, and program-transform-name,
# so that we can pass down a consistent program-transform-name.
baseargs=
+tbaseargs=
keep_next=no
skip_next=no
eval "set -- $ac_configure_args"
ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
baseargs="$baseargs '$ac_arg'"
+ tbaseargs="$tbaseargs '$ac_arg'"
keep_next=no
continue
fi
;;
esac
+ skip_targ=no
+ case $ac_arg in
+
+ --with-* | --without-*)
+ libopt=`echo "$ac_arg" | sed -e 's,^--[^-_]*[-_],,' -e 's,=.*$,,'`
+
+ case $libopt in
+ *[-_]include)
+ lib=`echo "$libopt" | sed 's,[-_]include$,,'`
+ ;;
+ *[-_]lib)
+ lib=`echo "$libopt" | sed 's,[-_]lib$,,'`
+ ;;
+ *)
+ lib=$libopt
+ ;;
+ esac
+
+
+ case $lib in
+ mpc | mpfr | gmp | ppl | cloog)
+ # If we're processing --with-$lib, --with-$lib-include or
+ # --with-$lib-lib, for one of the libs above, and target is
+ # different from host, don't pass the current argument to any
+ # target library's configure.
+ if test x$is_cross_compiler = xyes; then
+ skip_targ=yes
+ fi
+ ;;
+ esac
+ ;;
+ esac
+
case "$ac_arg" in
--cache-file=/dev/null | \
-cache-file=/dev/null )
# Handled here to avoid the test to skip args below.
baseargs="$baseargs '$ac_arg'"
+ tbaseargs="$tbaseargs '$ac_arg'"
# Assert: $separate_arg should always be no.
keep_next=$separate_arg
;;
ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
baseargs="$baseargs '$ac_arg'"
+ if test X"$skip_targ" = Xno; then
+ tbaseargs="$tbaseargs '$ac_arg'"
+ fi
keep_next=$separate_arg
;;
*)
gcc_transform_name=`cat conftestsed.out`
rm -f conftestsed.out
baseargs="$baseargs --program-transform-name='${gcc_transform_name}'"
+tbaseargs="$tbaseargs --program-transform-name='${gcc_transform_name}'"
if test "$silent" = yes; then
baseargs="$baseargs --silent"
+ tbaseargs="$tbaseargs --silent"
fi
baseargs="$baseargs --disable-option-checking"
+tbaseargs="$tbaseargs --disable-option-checking"
# Record and document user additions to sub configure arguments.
# This seems to be due to autoconf 2.5x stupidity.
host_configargs="$host_configargs --cache-file=./config.cache ${extra_host_args} ${baseargs}"
-target_configargs="$target_configargs ${baseargs}"
+target_configargs="$target_configargs ${tbaseargs}"
# Passing a --with-cross-host argument lets the target libraries know
# whether they are being built with a cross-compiler or being built