ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_help="$ac_help
- --without-libbanshee Don't build with libbanshee"
-ac_help="$ac_help
--enable-libada Builds libada directory"
ac_help="$ac_help
--with-mpfr-dir=PATH Specify source directory for MPFR library"
ac_help="$ac_help
--with-gmp=PATH Specify directory for installed GMP library"
ac_help="$ac_help
- --enable-bootstrap Enable bootstrapping [no]"
+ --enable-bootstrap[=lean] Enable bootstrapping [no]"
ac_help="$ac_help
--enable-serial-[{host,target,build}-]configure
Force sequential configuration of
ac_aux_dir=
-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+for ac_dir in ${GNUSYSTEM_AUX_DIR} $srcdir $srcdir/.. $srcdir/../..; do
if test -f $ac_dir/install-sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:597: checking host system type" >&5
+echo "configure:595: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:618: checking target system type" >&5
+echo "configure:616: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:636: checking build system type" >&5
+echo "configure:634: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:691: checking for a BSD compatible install" >&5
+echo "configure:689: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether ln works""... $ac_c" 1>&6
-echo "configure:744: checking whether ln works" >&5
+echo "configure:742: checking whether ln works" >&5
if eval "test \"`echo '$''{'acx_cv_prog_LN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:768: checking whether ln -s works" >&5
+echo "configure:766: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
build_libs="build-libiberty"
# these tools are built for the build environment
-build_tools="build-texinfo build-byacc build-flex build-bison build-m4"
+build_tools="build-texinfo build-byacc build-flex build-bison build-m4 build-fixincludes"
# these libraries are used by various programs built for the host environment
#
-host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libbanshee libcpp"
+host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp"
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
## ${target_configdirs} is directories we build using the target tools.
configdirs=`echo ${host_libs} ${host_tools}`
target_configdirs=`echo ${target_libraries} ${target_tools}`
-
-# Only make build libraries if build != host.
-if test ${host_alias} != ${build_alias} ; then
- build_configdirs=`echo ${build_libs} ${build_tools}`
-else
- build_configdirs=`echo ${build_tools}`
-fi
+build_configdirs=`echo ${build_libs} ${build_tools}`
################################################################################
;;
esac
-# Check whether --with-libbanshee or --without-libbanshee was given.
-if test "${with_libbanshee+set}" = set; then
- withval="$with_libbanshee"
- :
-fi
-
-case ${with_libbanshee} in
- no)
- noconfigdirs="$noconfigdirs libbanshee" ;;
- yes|"")
- with_libbanshee=yes
- ;;
- *)
- { echo "configure: error: --with-libbanshee can only be empty, "yes" or "no" (empty defaults to "yes"." 1>&2; exit 1; }
-esac
# Check whether --enable-libada or --disable-libada was given.
if test "${enable_libada+set}" = set; then
;;
powerpc-*-darwin*)
noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
- noconfigdirs="$noconfigdirs target-libobjc"
;;
*-*-darwin*)
noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
- noconfigdirs="$noconfigdirs target-libobjc ${libgcj}"
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
*-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
esac
;;
- *-*-netware)
- noconfigdirs="$noconfigdirs target-libstdc++-v3 target-newlib target-libiberty target-libgloss ${libgcj}"
+ *-*-netware*)
+ noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss ${libgcj} target-libmudflap"
;;
*-*-rtems*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
tentative_cc="/usr/cygnus/progressive/bin/gcc"
host_makefile_frag="config/mh-lynxrs6k"
;;
+ powerpc-*-darwin*)
+ host_makefile_frag="config/mh-ppc-darwin"
+ ;;
*-*-lynxos*)
# /bin/cc is less than useful for our purposes. Always use GCC
tentative_cc="/bin/gcc"
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1795: checking for $ac_word" >&5
+echo "configure:1774: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1825: checking for $ac_word" >&5
+echo "configure:1804: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1876: checking for $ac_word" >&5
+echo "configure:1855: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1908: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1887: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1919 "configure"
+#line 1898 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1924: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1903: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1950: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1929: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1955: checking whether we are using GNU C" >&5
+echo "configure:1934: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1964: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1943: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1983: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1962: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2050: checking for $ac_word" >&5
+echo "configure:2029: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gnatbind", so it can be a program name with args.
set dummy gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2082: checking for $ac_word" >&5
+echo "configure:2061: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether compiler driver understands Ada""... $ac_c" 1>&6
-echo "configure:2115: checking whether compiler driver understands Ada" >&5
+echo "configure:2094: checking whether compiler driver understands Ada" >&5
if eval "test \"`echo '$''{'acx_cv_cc_gcc_supports_ada'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking how to compare bootstrapped objects""... $ac_c" 1>&6
-echo "configure:2148: checking how to compare bootstrapped objects" >&5
+echo "configure:2127: checking how to compare bootstrapped objects" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_cmp_skip'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
CFLAGS="$CFLAGS $gmpinc"
# Check GMP actually works
echo $ac_n "checking for correct version of gmp.h""... $ac_c" 1>&6
-echo "configure:2246: checking for correct version of gmp.h" >&5
+echo "configure:2225: checking for correct version of gmp.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 2248 "configure"
+#line 2227 "configure"
#include "confdefs.h"
#include "gmp.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2259: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2238: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
if test x"$have_gmp" = xyes; then
echo $ac_n "checking for MPFR""... $ac_c" 1>&6
-echo "configure:2272: checking for MPFR" >&5
+echo "configure:2251: checking for MPFR" >&5
saved_LIBS="$LIBS"
LIBS="$LIBS $gmplibs"
cat > conftest.$ac_ext <<EOF
-#line 2277 "configure"
+#line 2256 "configure"
#include "confdefs.h"
#include <gmp.h>
#include <mpfr.h>
mpfr_t n; mpfr_init(n);
; return 0; }
EOF
-if { (eval echo configure:2285: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2264: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
new_enable_languages=c
missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ `
+ potential_languages=c
for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
case ${lang_frag} in
lang_dirs=
boot_language=
build_by_default=
- need_gmp=
+ need_gmp=
. ${lang_frag}
+ potential_languages="${potential_languages},${language}"
# This is quite sensitive to the ordering of the case statement arms.
case ,${enable_languages},:${language}:${have_gnat}:${build_by_default} in
*::*:*)
echo "${lang_frag} doesn't set \$language." 1>&2
exit 1
- ;;
+ ;;
*:ada:no:*)
# Ada was requested with no preexisting GNAT. Disable unconditionally.
add_this_lang=no
;;
*,all,*:*:*:no)
# 'all' was selected, but this is not a default language
- # so do not include it.
+ # so do not include it.
add_this_lang=no
- ;;
+ ;;
*,all,*:*:*:*)
# 'all' was selected and this is a default language; include it.
add_this_lang=yes
;;
esac
- # Disable language that need GMP if it isn't available.
- if test x"$need_gmp" = xyes && test x"$have_gmp" = xno; then
- add_this_lang=no
- fi
+ # Disable languages that need GMP if it isn't available.
+ case ,${enable_languages},:${have_gmp}:${need_gmp} in
+ *,${language},*:no:yes)
+ # Specifically requested language; tell them.
+ { echo "configure: error: GMP with MPFR support is required to build $language" 1>&2; exit 1; }
+ ;;
+ *:no:yes)
+ # Silently disable.
+ add_this_lang=no
+ ;;
+ esac
case $add_this_lang in
no)
missing_languages=`echo "$missing_languages" | sed -e "s/^,//" -e "s/,$//"`
if test "x$missing_languages" != x; then
{ echo "configure: error:
-The following requested languages were not found: ${missing_languages}" 1>&2; exit 1; }
+The following requested languages were not found: ${missing_languages}
+The available languages are: ${potential_languages}" 1>&2; exit 1; }
fi
if test "x$new_enable_languages" != "x$enable_languages"; then
extra_ranlibflags_for_target=
target_makefile_frag=/dev/null
case "${target}" in
- i[3456789]86-*-netware*)
- target_makefile_frag="config/mt-netware"
- ;;
- powerpc-*-netware*)
+ *-*-netware*)
target_makefile_frag="config/mt-netware"
;;
*-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
extra_host_args="$extra_host_args --with-newlib"
fi
-if test x${with_libbanshee} = xyes && echo " ${configdirs} " | grep " libbanshee " >/dev/null 2>&1; then
- extra_host_args="$extra_host_args --with-libbanshee"
-fi
-
# Default to using --with-stabs for certain targets.
if test x${with_stabs} = x ; then
case "${target}" in
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2759: checking for $ac_word" >&5
+echo "configure:2741: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_BISON'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2794: checking for $ac_word" >&5
+echo "configure:2776: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2829: checking for $ac_word" >&5
+echo "configure:2811: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_M4'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2864: checking for $ac_word" >&5
+echo "configure:2846: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_FLEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2899: checking for $ac_word" >&5
+echo "configure:2881: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2934: checking for $ac_word" >&5
+echo "configure:2916: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_MAKEINFO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
enableval="$enable_bootstrap"
:
else
- enable_bootstrap=no
+ enable_bootstrap=default
fi
-if test -d ${srcdir}/gcc; then
- case "$host:$target:$enable_bootstrap" in
- $build:$build:yes | *:no) ;;
- *:yes) { echo "configure: error: cannot bootstrap a cross-compiler" 1>&2; exit 1; } ;;
- *) { echo "configure: error: invalid option for --enable-bootstrap" 1>&2; exit 1; } ;;
- esac
-else
- if test $enable_bootstrap = yes; then
- { echo "configure: error: cannot bootstrap without a compiler" 1>&2; exit 1; }
- fi
-fi
+# Issue errors and warnings for invalid/strange bootstrap combinations.
+case "$configdirs" in
+ *gcc*) have_compiler=yes ;;
+ *) have_compiler=no ;;
+esac
+
+case "$have_compiler:$host:$target:$enable_bootstrap" in
+ *:*:*:no) ;;
+
+ # Default behavior. (We'll) enable bootstrap if we have a compiler
+ # and we are in a native configuration.
+ yes:$build:$build:default)
+ # This will become 'yes'
+ enable_bootstrap=no ;;
+
+ *:*:*:default)
+ enable_bootstrap=no ;;
+
+ # We have a compiler and we are in a native configuration, bootstrap is ok
+ yes:$build:$build:yes | yes:$build:$build:lean)
+ ;;
+
+ # Other configurations, but we have a compiler. Assume the user knows
+ # what he's doing.
+ yes:*:*:yes | yes:*:*:lean)
+ echo "configure: warning: trying to bootstrap a cross compiler" 1>&2
+ ;;
+
+ # No compiler: if they passed --enable-bootstrap explicitly, fail
+ no:*:*:yes | no:*:*:lean)
+ { echo "configure: error: cannot bootstrap without a compiler" 1>&2; exit 1; } ;;
+
+ # Fail if wrong command line
+ *)
+ { echo "configure: error: invalid option for --enable-bootstrap" 1>&2; exit 1; }
+ ;;
+esac
+
+# Adjust the toplevel makefile according to whether bootstrap was selected.
case "$enable_bootstrap" in
yes)
+ bootstrap_lean='#'
+ default_target=bootstrap
+ bootstrap_suffix=bootstrap ;;
+ lean)
+ bootstrap_lean=''
default_target=bootstrap
bootstrap_suffix=bootstrap ;;
no)
esac
+
for module in ${build_configdirs} ; do
if test -z "${no_recursion}" \
&& test -f ${build_subdir}/${module}/Makefile; then
# Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3534: checking for $ac_word" >&5
+echo "configure:3550: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3567: checking for $ac_word" >&5
+echo "configure:3583: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args.
set dummy ${ncn_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3606: checking for $ac_word" >&5
+echo "configure:3622: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3639: checking for $ac_word" >&5
+echo "configure:3655: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ncn_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3678: checking for $ac_word" >&5
+echo "configure:3694: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3711: checking for $ac_word" >&5
+echo "configure:3727: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3750: checking for $ac_word" >&5
+echo "configure:3766: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3783: checking for $ac_word" >&5
+echo "configure:3799: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args.
set dummy ${ncn_tool_prefix}nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3822: checking for $ac_word" >&5
+echo "configure:3838: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3855: checking for $ac_word" >&5
+echo "configure:3871: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3894: checking for $ac_word" >&5
+echo "configure:3910: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3927: checking for $ac_word" >&5
+echo "configure:3943: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args.
set dummy ${ncn_tool_prefix}windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3966: checking for $ac_word" >&5
+echo "configure:3982: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3999: checking for $ac_word" >&5
+echo "configure:4015: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args.
set dummy ${ncn_tool_prefix}objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4038: checking for $ac_word" >&5
+echo "configure:4054: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "objcopy", so it can be a program name with args.
set dummy objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4071: checking for $ac_word" >&5
+echo "configure:4087: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args.
set dummy ${ncn_tool_prefix}objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4110: checking for $ac_word" >&5
+echo "configure:4126: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "objdump", so it can be a program name with args.
set dummy objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4143: checking for $ac_word" >&5
+echo "configure:4159: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4189: checking for $ac_word" >&5
+echo "configure:4205: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4222: checking for $ac_word" >&5
+echo "configure:4238: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4261: checking for $ac_word" >&5
+echo "configure:4277: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4294: checking for $ac_word" >&5
+echo "configure:4310: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4333: checking for $ac_word" >&5
+echo "configure:4349: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4366: checking for $ac_word" >&5
+echo "configure:4382: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4405: checking for $ac_word" >&5
+echo "configure:4421: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4438: checking for $ac_word" >&5
+echo "configure:4454: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4477: checking for $ac_word" >&5
+echo "configure:4493: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4510: checking for $ac_word" >&5
+echo "configure:4526: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4549: checking for $ac_word" >&5
+echo "configure:4565: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4582: checking for $ac_word" >&5
+echo "configure:4598: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4621: checking for $ac_word" >&5
+echo "configure:4637: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4654: checking for $ac_word" >&5
+echo "configure:4670: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:4739: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:4755: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
# It makes debugging easier if we create as symlinks the stage directories
-# gcc for stageN-gcc and stage-prev for stage(N-1). In case this is not
+# gcc for stageN-gcc and stagePREV-gcc for stage(N-1). In case this is not
# possible, however, we can resort to mv.
echo $ac_n "checking if symbolic links between directories work""... $ac_c" 1>&6
-echo "configure:4786: checking if symbolic links between directories work" >&5
+echo "configure:4802: checking if symbolic links between directories work" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_ln_s_dir'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
s%@CONFIGURED_FLEX@%$CONFIGURED_FLEX%g
s%@CONFIGURED_LEX@%$CONFIGURED_LEX%g
s%@CONFIGURED_MAKEINFO@%$CONFIGURED_MAKEINFO%g
+s%@bootstrap_lean@%$bootstrap_lean%g
s%@default_target@%$default_target%g
/@serialization_dependencies@/r $serialization_dependencies
s%@serialization_dependencies@%%g