### WARNING: this file contains embedded tabs. Do not run untabify on this file.
# Configuration script
-# Copyright (C) 1988, 90, 91, 92, 93, 94, 95, 96, 1997
+# Copyright (C) 1988, 90, 91, 92, 93, 94, 95, 96, 97, 98, 1999
# Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
configdirs=
extraconfigdirs=
diroptions=
+enable_threads=no
+enable_shared=no
+enable_libstdcxx_v3=yes
exec_prefix=
exec_prefixoption=
fatal=
target_alias=NOTARGET
target_makefile_frag=
undefs=NOUNDEFS
-version="$Revision: 1.22 $"
+version="$Revision: 1.31 $"
x11=default
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
;;
esac
+# Export original configure arguments for use by sub-configures.
+TOPLEVEL_CONFIGURE_ARGUMENTS="$progname $@"
+export TOPLEVEL_CONFIGURE_ARGUMENTS
+
# Loop over all args
while :
esac
enableopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'`
- eval "$enableopt='$optarg'"
+ eval "$enableopt=\$optarg"
enableoptions="$enableoptions '$option'"
;;
--exec-prefix* | --ex*)
esac
withopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'`
- eval $withopt="$optarg"
+ eval $withopt="\$optarg"
withoptions="$withoptions $option"
;;
--without-*)
configsub=`echo ${progname} | sed 's/configure$/config.sub/'`
moveifchange=`echo ${progname} | sed 's/configure$/move-if-change/'`
-topsrcdir=`cd \`dirname ${progname}\`; pwd`
+## the sed command below emulates the dirname command
+topsrcdir=`cd \`echo ${progname} | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'\`; pwd`
# this is a hack. sun4 must always be a valid host alias or this will fail.
# the gcc version number changes.
if [ "${with_gcc_version_trigger+set}" = set ]; then
gcc_version_trigger="$with_gcc_version_trigger"
- gcc_version=`sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/' < ${with_gcc_version_trigger}`
+ gcc_version=`grep version_string ${with_gcc_version_trigger} | sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/'`
else
# If gcc's sources are available, define the trigger file.
if [ -f ${topsrcdir}/gcc/version.c ] ; then
gcc_version_trigger=${topsrcdir}/gcc/version.c
- gcc_version=`sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/' < ${gcc_version_trigger}`
+ gcc_version=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/'`
case "$arguments" in
*--with-gcc-version-trigger=$gcc_version_trigger* )
;;
*) ;;
esac
-# keep this filename short for &%*%$*# 14 char file names
-tmpfile=${TMPDIR}/cONf$$
+# keep this filename short for &%*%$*# 14 char file names and 8+3 file names
+tmpfile=${TMPDIR}/cNf$$
# Note that under many versions of sh a trap handler for 0 will *override* any
# exit status you explicitly specify! At this point, the only non-error exit
# is at the end of the script; these actions are duplicated there, minus
tools="${tools} HOST_PREFIX_1 LD LD_FOR_TARGET LEX MAKEINFO NM"
tools="${tools} NM_FOR_TARGET RANLIB RANLIB_FOR_TARGET"
tools="${tools} WINDRES WINDRES_FOR_TARGET YACC"
+ tools="${tools} OBJCOPY OBJDUMP"
for var in ${tools}; do
- if [ -z "`eval 'echo $'"${var}"`" ] && [ -r Makefile ]; then
+ if eval [ -z \"\$${var}\" ] && [ -r Makefile ]; then
sed -n -e ':loop
/\\$/ N
s/\\\n//g
< Makefile > Makefile.v
t=`tail -1 Makefile.v`
if [ -n "${t}" ]; then
- eval "${var}='${t}'"
+ eval "${var}=\${t}"
fi
rm -f Makefile.v
fi
RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET-${target_alias}-ranlib}
WINDRES=${WINDRES-${host_alias}-windres}
WINDRES_FOR_TARGET=${WINDRES_FOR_TARGET-${target_alias}-windres}
+ OBJCOPY=${OBJCOPY-${host_alias}-objcopy}
+ OBJDUMP=${OBJDUMP-${host_alias}-objdump}
if [ -z "${YACC}" ]; then
IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
export NM
export RANLIB
export WINDRES
+ export OBJCOPY
+ export OBJDUMP
else
# If CC is still not set, try to get gcc.
if [ -z "${CC}" ]; then
enable_gdbtk=no ;;
*msdosdjgpp*)
enable_gdbtk=no ;;
- *cygwin32*)
- enable_gdbtk=no ;;
esac
# FIXME: This should be in configure.in, not configure
# Determine whether gdb needs tk/tcl or not.
if [ "$enable_gdbtk" != "no" ]; then
- GDB_TK="all-tcl all-tk all-itcl all-tix"
+ GDB_TK="all-tcl all-tk all-itcl all-tix all-libgui"
else
GDB_TK=""
fi
echo site_makefile_frag = ${invsubdir}${site_makefile_frag} >>${Makefile}
fi
- # record if we want to build shared libs.
- if test -z "${enable_shared}"; then
- echo enable_shared = no >> ${Makefile}
- else
- echo enable_shared = ${enable_shared} >> ${Makefile}
- fi
+ echo enable_shared = ${enable_shared} >> ${Makefile}
+ echo enable_threads = ${enable_threads} >> ${Makefile}
# record if we want to rumtime library stuff installed in libsubdir.
if test -z "${enable_version_specific_runtime_libs}"; then
echo enable_version_specific_runtime_libs = no >> ${Makefile}
s%^CXXFLAGS[ ]*=.*$%CXXFLAGS = ${CXXFLAGS}%
}" \
-e "s|^SHELL[ ]*=.*$|SHELL = ${config_shell}|" \
- -e "s:^GDB_TK[ ]*=.*$:GDB_TK = ${GDB_TK}:" \
-e "s|^srcdir[ ]*=.*$|srcdir = ${makesrcdir}|" \
-e "s/\f//" \
-e "s:^program_prefix[ ]*=.*$:program_prefix = ${program_prefix}:" \
-e "s:^DEFAULT_LEX[ ]*=.*$:DEFAULT_LEX = ${DEFAULT_LEX}:" \
-e "s:^DEFAULT_M4[ ]*=.*$:DEFAULT_M4 = ${DEFAULT_M4}:" \
${subdir}/Makefile.tem >> ${Makefile}
+
+ sed -e "s:^GDB_TK[ ]*=.*$:GDB_TK = ${GDB_TK}:" ${Makefile} >${Makefile}.tem
+ mv -f ${Makefile}.tem ${Makefile}
# If this is a Canadian Cross, preset the values of many more
# tools.
if [ "${build}" != "${host}" ]; then
for var in ${tools}; do
- val=`eval 'echo $'"${var}"`
+ eval val=\$${var}
sed -e "/^${var}[ ]*=/{
:loop1
/\\\\$/ N
OSDN Git Service
