ac_help="$ac_help
--enable-libada Builds libada directory"
ac_help="$ac_help
+ --enable-libssp Builds libssp directory"
+ac_help="$ac_help
--with-mpfr-dir=PATH Specify source directory for MPFR library"
ac_help="$ac_help
--with-mpfr=PATH Specify directory for installed MPFR library"
ac_help="$ac_help
--with-gmp=PATH Specify directory for installed GMP library"
ac_help="$ac_help
+ --with-build-sysroot=sysroot
+ use sysroot as the system root during the build"
+ac_help="$ac_help
--enable-bootstrap[=lean] Enable bootstrapping [no]"
ac_help="$ac_help
--enable-serial-[{host,target,build}-]configure
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:595: checking host system type" >&5
+echo "configure:600: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:616: checking target system type" >&5
+echo "configure:621: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:634: checking build system type" >&5
+echo "configure:639: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:689: checking for a BSD compatible install" >&5
+echo "configure:694: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether ln works""... $ac_c" 1>&6
-echo "configure:742: checking whether ln works" >&5
+echo "configure:747: checking whether ln works" >&5
if eval "test \"`echo '$''{'acx_cv_prog_LN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:766: checking whether ln -s works" >&5
+echo "configure:771: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
target-newlib \
target-libstdc++-v3 \
target-libmudflap \
+ target-libssp \
target-libgfortran \
${libgcj} \
target-libobjc \
configdirs="$configdirs libtermcap" ;;
esac
+# A target can indicate whether a language isn't supported for some reason.
+# Only spaces may be used in this macro; not newlines or tabs.
+unsupported_languages=
+
# Remove more programs from consideration, based on the host or
# target this usually means that a port of the program doesn't
# exist yet.
noconfigdirs="$noconfigdirs gnattools"
fi
+# Check whether --enable-libssp or --disable-libssp was given.
+if test "${enable_libssp+set}" = set; then
+ enableval="$enable_libssp"
+ ENABLE_LIBSSP=$enableval
+else
+ ENABLE_LIBSSP=yes
+fi
+
+if test "${ENABLE_LIBSSP}" != "yes" ; then
+ noconfigdirs="$noconfigdirs target-libssp"
+fi
+
# Save it here so that, even in case of --enable-libgcj, if the Java
# front-end isn't enabled, we still get libgcj disabled.
libgcj_saved=$libgcj
;;
powerpc-*-darwin*)
noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
+ noconfigdirs="$noconfigdirs sim target-rda"
;;
*-*-darwin*)
noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
+ noconfigdirs="$noconfigdirs sim target-rda"
noconfigdirs="$noconfigdirs ${libgcj}"
;;
*-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
*-*-rtems*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
+ # The tpf target doesn't support gdb yet.
+ *-*-tpf*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty ${libgcj} target-libmudflap gdb tcl tk libgui itcl"
+ ;;
*-*-uclinux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss target-rda ${libgcj}"
;;
*-*-vxworks*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty ${libgcj}"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty target-libstdc++-v3 ${libgcj}"
+ ;;
+ m32c-*-*)
+ noconfigdirs="$noconfigdirs target-libstdc++-v3"
;;
alpha*-dec-osf*)
# ld works, but does not support shared libraries.
avr-*-*)
noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
;;
+ bfin-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss gdb"
+ if x${is_cross_compiler} != xno ; then
+ target_configdirs="${target_configdirs} target-bsp target-cygmon"
+ fi
+ ;;
c4x-*-* | tic4x-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
;;
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib"
;;
cris-*-* | crisv32-*-*)
- libgcj_ex_libffi=`echo ${libgcj} | sed -e 's/target-libffi//'`
+ unsupported_languages="$unsupported_languages java"
case "${target}" in
*-*-aout)
- noconfigdirs="$noconfigdirs ${libgcj}";;
+ unsupported_languages="$unsupported_languages fortran"
+ noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
*-*-elf)
- noconfigdirs="$noconfigdirs ${libgcj_ex_libffi}";;
+ unsupported_languages="$unsupported_languages fortran"
+ noconfigdirs="$noconfigdirs target-boehm-gc";;
*-*-linux*)
- noconfigdirs="$noconfigdirs ${libgcj_ex_libffi} target-newlib target-libgloss";;
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss";;
*)
+ unsupported_languages="$unsupported_languages fortran"
noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss";;
esac
;;
noconfigdirs="$noconfigdirs target-libstdc++-v3"
;;
mmix-*-*)
- noconfigdirs="$noconfigdirs ${libgcj} gdb libgloss target-libgfortran"
+ noconfigdirs="$noconfigdirs target-libffi target-boehm-gc gdb libgloss"
+ unsupported_languages="$unsupported_languages fortran java"
;;
mn10200-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
mn10300-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
+ ms1-*-*)
+ noconfigdirs="$noconfigdirs sim"
+ ;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
- noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp ${libgcj}"
;;
powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
target_configdirs="$target_configdirs target-winsup"
noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
;;
rs6000-*-aix*)
- noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp ${libgcj}"
;;
rs6000-*-*)
noconfigdirs="$noconfigdirs gprof ${libgcj}"
CXX=${CXX-${host_alias}-c++}
CXXFLAGS=${CXXFLAGS-"-g -O2"}
CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
- CC_FOR_TARGET=${CC_FOR_TARGET-${target_alias}-gcc}
- CXX_FOR_TARGET=${CXX_FOR_TARGET-${target_alias}-c++}
- GCJ_FOR_TARGET=${GCJ_FOR_TARGET-${target_alias}-gcj}
- GCC_FOR_TARGET=${GCC_FOR_TARGET-${CC_FOR_TARGET-${target_alias}-gcc}}
BUILD_PREFIX=${build_alias}-
BUILD_PREFIX_1=${build_alias}-
# This is all going to change when we autoconfiscate...
CC_FOR_BUILD="\$(CC)"
- GCC_FOR_TARGET="\$(USUAL_GCC_FOR_TARGET)"
BUILD_PREFIX=
BUILD_PREFIX_1=loser-
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1782: checking for $ac_word" >&5
+echo "configure:1821: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1812: checking for $ac_word" >&5
+echo "configure:1851: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1863: checking for $ac_word" >&5
+echo "configure:1902: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1895: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1934: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1906 "configure"
+#line 1945 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1911: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1950: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1937: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1976: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1942: checking whether we are using GNU C" >&5
+echo "configure:1981: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1951: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1990: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1970: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:2009: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2037: checking for $ac_word" >&5
+echo "configure:2076: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gnatbind", so it can be a program name with args.
set dummy gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2069: checking for $ac_word" >&5
+echo "configure:2108: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether compiler driver understands Ada""... $ac_c" 1>&6
-echo "configure:2102: checking whether compiler driver understands Ada" >&5
+echo "configure:2141: checking whether compiler driver understands Ada" >&5
if eval "test \"`echo '$''{'acx_cv_cc_gcc_supports_ada'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking how to compare bootstrapped objects""... $ac_c" 1>&6
-echo "configure:2134: checking how to compare bootstrapped objects" >&5
+echo "configure:2173: checking how to compare bootstrapped objects" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_cmp_skip'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "x$with_mpfr_dir" != x; then
- gmpinc="-I$with_mpfr_dir/mpfr"
+ gmpinc="-I$with_mpfr_dir"
gmplibs="$with_mpfr_dir/libmpfr.a"
else
gmplibs="-lmpfr"
CFLAGS="$CFLAGS $gmpinc"
# Check GMP actually works
echo $ac_n "checking for correct version of gmp.h""... $ac_c" 1>&6
-echo "configure:2232: checking for correct version of gmp.h" >&5
+echo "configure:2271: checking for correct version of gmp.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 2234 "configure"
+#line 2273 "configure"
#include "confdefs.h"
#include "gmp.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2245: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2284: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
if test x"$have_gmp" = xyes; then
echo $ac_n "checking for MPFR""... $ac_c" 1>&6
-echo "configure:2258: checking for MPFR" >&5
+echo "configure:2297: checking for MPFR" >&5
saved_LIBS="$LIBS"
LIBS="$LIBS $gmplibs"
cat > conftest.$ac_ext <<EOF
-#line 2263 "configure"
+#line 2302 "configure"
#include "confdefs.h"
#include <gmp.h>
#include <mpfr.h>
mpfr_t n; mpfr_init(n);
; return 0; }
EOF
-if { (eval echo configure:2271: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2310: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
fi
enable_languages=`echo "${enable_languages}" | sed -e 's/[ ,][ ,]*/,/g' -e 's/,$//'`
+ # 'f95' is the old name for the 'fortran' language. We issue a warning
+ # and make the substitution.
+ case ,${enable_languages}, in
+ *,f95,*)
+ echo configure.in: warning: 'f95' as language name is deprecated, use 'fortran' instead 1>&2
+ enable_languages=`echo "${enable_languages}" | sed -e 's/f95/fortran/g'`
+ ;;
+ esac
+
# First scan to see if an enabled language requires some other language.
# We assume that a given config-lang.in will list all the language
# front ends it requires, even if some are required indirectly.
add_this_lang=no
;;
esac
-
+
+ # Disable a language that is unsupported by the target.
+ case " $unsupported_languages " in
+ *" $language "*)
+ add_this_lang=no
+ ;;
+ esac
+
case $add_this_lang in
no)
# Remove language-dependent dirs.
missing_languages=`echo "$missing_languages" | sed -e "s/^,//" -e "s/,$//"`
if test "x$missing_languages" != x; then
{ echo "configure: error:
-The following requested languages were not found: ${missing_languages}
-The available languages are: ${potential_languages}" 1>&2; exit 1; }
+The following requested languages could not be built: ${missing_languages}
+Recognised languages are: ${potential_languages}" 1>&2; exit 1; }
fi
if test "x$new_enable_languages" != "x$enable_languages"; then
copy_dirs=
+# Check whether --with-build-sysroot or --without-build-sysroot was given.
+if test "${with_build_sysroot+set}" = set; then
+ withval="$with_build_sysroot"
+ if test x"$withval" != x ; then
+ SYSROOT_CFLAGS_FOR_TARGET="--sysroot=$withval"
+ fi
+else
+ SYSROOT_CFLAGS_FOR_TARGET=
+fi
+
+
+
# Handle --with-headers=XXX. If the value is not "yes", the contents of
# the named directory are copied to $(tooldir)/sys-include.
if test x"${with_headers}" != x && test x"${with_headers}" != xno ; then
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2758: checking for $ac_word" >&5
+echo "configure:2825: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_BISON'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2793: checking for $ac_word" >&5
+echo "configure:2860: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2828: checking for $ac_word" >&5
+echo "configure:2895: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_M4'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2863: checking for $ac_word" >&5
+echo "configure:2930: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_FLEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2898: checking for $ac_word" >&5
+echo "configure:2965: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2933: checking for $ac_word" >&5
+echo "configure:3000: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_MAKEINFO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# fixed in future. It's still worthwhile to use a cache file for each
# directory. I think.
-# Pass the appropriate --host, --build, and --cache-file arguments.
-target_configargs="--cache-file=./config.cache --host=${target_alias} --build=${build_alias} ${target_configargs}"
+# Pass the appropriate --build, --host, --target and --cache-file arguments.
+# We need to pass --target, as newer autoconf's requires consistency
+# for target_alias and gcc doesn't manage it consistently.
+target_configargs="--cache-file=./config.cache --build=${build_alias} --host=${target_alias} --target=${target_alias} ${target_configargs}"
FLAGS_FOR_TARGET=
case " $target_configdirs " in
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(HOST_SUBDIR)/ld'
fi
-if test "x${CC_FOR_TARGET+set}" = xset; then
- :
-elif test -d ${srcdir}/gcc; then
- CC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/'
-elif test "$host" = "$target"; then
- CC_FOR_TARGET='$(CC)'
-else
- CC_FOR_TARGET=`echo gcc | sed "${program_transform_name}"`
-fi
-CC_FOR_TARGET=$CC_FOR_TARGET' $(FLAGS_FOR_TARGET)'
-
-if test "x${GCJ_FOR_TARGET+set}" = xset; then
- :
-elif test -d ${srcdir}/gcc; then
- GCJ_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc/'
-elif test "$host" = "$target"; then
- GCJ_FOR_TARGET='gcj'
-else
- GCJ_FOR_TARGET=`echo gcj | sed "${program_transform_name}"`
-fi
-GCJ_FOR_TARGET=$GCJ_FOR_TARGET' $(FLAGS_FOR_TARGET)'
-
-if test "x${GFORTRAN_FOR_TARGET+set}" = xset; then
- :
-elif test -d ${srcdir}/gcc; then
- GFORTRAN_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc/'
-elif test "$host" = "$target"; then
- GFORTRAN_FOR_TARGET='gfortran'
-else
- GFORTRAN_FOR_TARGET=`echo gfortran | sed "${program_transform_name}"`
-fi
-case $GFORTRAN_FOR_TARGET in
-*' $(FLAGS_FOR_TARGET)') ;;
-*) GFORTRAN_FOR_TARGET=$GFORTRAN_FOR_TARGET' $(FLAGS_FOR_TARGET)' ;;
-esac
-
-# Don't use libstdc++-v3's flags to configure/build itself.
-libstdcxx_flags='`test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
-raw_libstdcxx_flags='-L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
-
-if test "x${CXX_FOR_TARGET+set}" = xset; then
- if test "x${RAW_CXX_FOR_TARGET+set}" != xset; then
- RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
- fi
-elif test -d ${srcdir}/gcc; then
- # We add -shared-libgcc to CXX_FOR_TARGET whenever we use xgcc instead
- # of g++ for linking C++ or Java, because g++ has -shared-libgcc by
- # default whereas gcc does not.
- # RAW_CXX_FOR_TARGET is for linking C++ or java; CXX_FOR_TARGET is for
- # all other cases.
- CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ '$libstdcxx_flags
- RAW_CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ '$raw_libstdcxx_flags
-elif test "$host" = "$target"; then
- CXX_FOR_TARGET='$(CXX)'
- RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
-else
- CXX_FOR_TARGET=`echo c++ | sed "${program_transform_name}"`
- RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
-fi
-CXX_FOR_TARGET=$CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)'
-RAW_CXX_FOR_TARGET=$RAW_CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)'
-
-qCXX_FOR_TARGET=`echo "$CXX_FOR_TARGET" | sed 's,[&%],\\\&,g'`
-qRAW_CXX_FOR_TARGET=`echo "$RAW_CXX_FOR_TARGET" | sed 's,[&%],\\\&,g'`
-
-# We want to defer the evaluation of `cmd`s and shell variables in
-# CXX_FOR_TARGET when recursing in the top-level Makefile, such as for
-# bootstrap. We'll enclose CXX_FOR_TARGET_FOR_RECURSIVE_MAKE in single
-# quotes, but we still have to duplicate `$'s so that shell variables
-# can be expanded by the nested make as shell variables, not as make
-# macros.
-qqCXX_FOR_TARGET=`echo "$qCXX_FOR_TARGET" | sed -e 's,[$][$],$$$$,g'`
-qqRAW_CXX_FOR_TARGET=`echo "$qRAW_CXX_FOR_TARGET" | sed -e 's,[$][$],$$$$,g'`
-
-# Wrap CC_FOR_TARGET and friends, for certain types of builds.
-CC_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${CC_FOR_TARGET}"
-GCJ_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${GCJ_FOR_TARGET}"
-GFORTRAN_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${GFORTRAN_FOR_TARGET}"
-CXX_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${qCXX_FOR_TARGET}"
-RAW_CXX_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${qRAW_CXX_FOR_TARGET}"
-CXX_FOR_TARGET_FOR_RECURSIVE_MAKE="\$(STAGE_CC_WRAPPER) ${qqCXX_FOR_TARGET}"
-RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE="\$(STAGE_CC_WRAPPER) ${qqRAW_CXX_FOR_TARGET}"
-
# Makefile fragments.
for frag in host_makefile_frag target_makefile_frag alphaieee_frag ospace_frag;
do
ncn_target_tool_prefix=
test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}ar; ac_word=$2
+ for ncn_progname in ar; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3538: checking for $ac_word" >&5
+echo "configure:3525: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AR="${ncn_tool_prefix}ar"
+ ac_cv_prog_AR="${ncn_tool_prefix}${ncn_progname}"
break
fi
done
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_AR" ; then
- if test $build = $host ; then
- ncn_cv_AR=$AR
- # Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_AR" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3571: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then
+echo "configure:3556: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_AR"; then
- ac_cv_prog_ncn_cv_AR="$ncn_cv_AR" # Let the user override the test.
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_AR="ar"
+ ac_cv_prog_AR="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_AR" && ac_cv_prog_ncn_cv_AR="ar"
fi
fi
-ncn_cv_AR="$ac_cv_prog_ncn_cv_AR"
-if test -n "$ncn_cv_AR"; then
- echo "$ac_t""$ncn_cv_AR" 1>&6
+AR="$ac_cv_prog_AR"
+if test -n "$AR"; then
+ echo "$ac_t""$AR" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- AR=$ncn_cv_AR
+ fi
+ test -n "$ac_cv_prog_AR" && break
+done
+
+if test -z "$ac_cv_prog_AR" ; then
+ set dummy ar
+ if test $build = $host ; then
+ AR="$2"
else
- AR="${ncn_tool_prefix}ar"
+ AR="${ncn_tool_prefix}$2"
fi
-else
- AR="$ac_cv_prog_AR"
fi
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}as; ac_word=$2
+ for ncn_progname in as; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3610: checking for $ac_word" >&5
+echo "configure:3600: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS="${ncn_tool_prefix}as"
+ ac_cv_prog_AS="${ncn_tool_prefix}${ncn_progname}"
break
fi
done
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_AS" ; then
- if test $build = $host ; then
- ncn_cv_AS=$AS
- # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_AS" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3643: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then
+echo "configure:3631: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_AS"; then
- ac_cv_prog_ncn_cv_AS="$ncn_cv_AS" # Let the user override the test.
+ if test -n "$AS"; then
+ ac_cv_prog_AS="$AS" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_AS="as"
+ ac_cv_prog_AS="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_AS" && ac_cv_prog_ncn_cv_AS="as"
fi
fi
-ncn_cv_AS="$ac_cv_prog_ncn_cv_AS"
-if test -n "$ncn_cv_AS"; then
- echo "$ac_t""$ncn_cv_AS" 1>&6
+AS="$ac_cv_prog_AS"
+if test -n "$AS"; then
+ echo "$ac_t""$AS" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- AS=$ncn_cv_AS
+ fi
+ test -n "$ac_cv_prog_AS" && break
+done
+
+if test -z "$ac_cv_prog_AS" ; then
+ set dummy as
+ if test $build = $host ; then
+ AS="$2"
else
- AS="${ncn_tool_prefix}as"
+ AS="${ncn_tool_prefix}$2"
fi
-else
- AS="$ac_cv_prog_AS"
fi
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}dlltool; ac_word=$2
+ for ncn_progname in dlltool; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3682: checking for $ac_word" >&5
+echo "configure:3675: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL="${ncn_tool_prefix}dlltool"
+ ac_cv_prog_DLLTOOL="${ncn_tool_prefix}${ncn_progname}"
break
fi
done
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_DLLTOOL" ; then
- if test $build = $host ; then
- ncn_cv_DLLTOOL=$DLLTOOL
- # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_DLLTOOL" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3715: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then
+echo "configure:3706: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_DLLTOOL"; then
- ac_cv_prog_ncn_cv_DLLTOOL="$ncn_cv_DLLTOOL" # Let the user override the test.
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_DLLTOOL="dlltool"
+ ac_cv_prog_DLLTOOL="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_DLLTOOL" && ac_cv_prog_ncn_cv_DLLTOOL="dlltool"
fi
fi
-ncn_cv_DLLTOOL="$ac_cv_prog_ncn_cv_DLLTOOL"
-if test -n "$ncn_cv_DLLTOOL"; then
- echo "$ac_t""$ncn_cv_DLLTOOL" 1>&6
+DLLTOOL="$ac_cv_prog_DLLTOOL"
+if test -n "$DLLTOOL"; then
+ echo "$ac_t""$DLLTOOL" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- DLLTOOL=$ncn_cv_DLLTOOL
+ fi
+ test -n "$ac_cv_prog_DLLTOOL" && break
+done
+
+if test -z "$ac_cv_prog_DLLTOOL" ; then
+ set dummy dlltool
+ if test $build = $host ; then
+ DLLTOOL="$2"
else
- DLLTOOL="${ncn_tool_prefix}dlltool"
+ DLLTOOL="${ncn_tool_prefix}$2"
fi
-else
- DLLTOOL="$ac_cv_prog_DLLTOOL"
fi
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}ld; ac_word=$2
+ for ncn_progname in ld; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3754: checking for $ac_word" >&5
+echo "configure:3750: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_LD="${ncn_tool_prefix}ld"
+ ac_cv_prog_LD="${ncn_tool_prefix}${ncn_progname}"
break
fi
done
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_LD" ; then
- if test $build = $host ; then
- ncn_cv_LD=$LD
- # Extract the first word of "ld", so it can be a program name with args.
-set dummy ld; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_LD" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3787: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then
+echo "configure:3781: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_LD"; then
- ac_cv_prog_ncn_cv_LD="$ncn_cv_LD" # Let the user override the test.
+ if test -n "$LD"; then
+ ac_cv_prog_LD="$LD" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_LD="ld"
+ ac_cv_prog_LD="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_LD" && ac_cv_prog_ncn_cv_LD="ld"
fi
fi
-ncn_cv_LD="$ac_cv_prog_ncn_cv_LD"
-if test -n "$ncn_cv_LD"; then
- echo "$ac_t""$ncn_cv_LD" 1>&6
+LD="$ac_cv_prog_LD"
+if test -n "$LD"; then
+ echo "$ac_t""$LD" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- LD=$ncn_cv_LD
+ fi
+ test -n "$ac_cv_prog_LD" && break
+done
+
+if test -z "$ac_cv_prog_LD" ; then
+ set dummy ld
+ if test $build = $host ; then
+ LD="$2"
else
- LD="${ncn_tool_prefix}ld"
+ LD="${ncn_tool_prefix}$2"
fi
-else
- LD="$ac_cv_prog_LD"
fi
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}nm; ac_word=$2
+ for ncn_progname in nm; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3826: checking for $ac_word" >&5
+echo "configure:3825: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_NM="${ncn_tool_prefix}nm"
+ ac_cv_prog_NM="${ncn_tool_prefix}${ncn_progname}"
break
fi
done
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_NM" ; then
- if test $build = $host ; then
- ncn_cv_NM=$NM
- # Extract the first word of "nm", so it can be a program name with args.
-set dummy nm; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_NM" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3859: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then
+echo "configure:3856: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_NM"; then
- ac_cv_prog_ncn_cv_NM="$ncn_cv_NM" # Let the user override the test.
+ if test -n "$NM"; then
+ ac_cv_prog_NM="$NM" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_NM="nm"
+ ac_cv_prog_NM="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_NM" && ac_cv_prog_ncn_cv_NM="nm"
fi
fi
-ncn_cv_NM="$ac_cv_prog_ncn_cv_NM"
-if test -n "$ncn_cv_NM"; then
- echo "$ac_t""$ncn_cv_NM" 1>&6
+NM="$ac_cv_prog_NM"
+if test -n "$NM"; then
+ echo "$ac_t""$NM" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- NM=$ncn_cv_NM
+ fi
+ test -n "$ac_cv_prog_NM" && break
+done
+
+if test -z "$ac_cv_prog_NM" ; then
+ set dummy nm
+ if test $build = $host ; then
+ NM="$2"
else
- NM="${ncn_tool_prefix}nm"
+ NM="${ncn_tool_prefix}$2"
fi
-else
- NM="$ac_cv_prog_NM"
fi
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}ranlib; ac_word=$2
+ for ncn_progname in ranlib; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3898: checking for $ac_word" >&5
+echo "configure:3900: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_RANLIB="${ncn_tool_prefix}ranlib"
+ ac_cv_prog_RANLIB="${ncn_tool_prefix}${ncn_progname}"
break
fi
done
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_RANLIB" ; then
- if test $build = $host ; then
- ncn_cv_RANLIB=$RANLIB
- # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_RANLIB" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3931: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_RANLIB"; then
- ac_cv_prog_ncn_cv_RANLIB="$ncn_cv_RANLIB" # Let the user override the test.
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_RANLIB="ranlib"
+ ac_cv_prog_RANLIB="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_RANLIB" && ac_cv_prog_ncn_cv_RANLIB=":"
fi
fi
-ncn_cv_RANLIB="$ac_cv_prog_ncn_cv_RANLIB"
-if test -n "$ncn_cv_RANLIB"; then
- echo "$ac_t""$ncn_cv_RANLIB" 1>&6
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- RANLIB=$ncn_cv_RANLIB
- else
- RANLIB=":"
fi
-else
- RANLIB="$ac_cv_prog_RANLIB"
+ test -n "$ac_cv_prog_RANLIB" && break
+done
+
+if test -z "$ac_cv_prog_RANLIB" ; then
+ RANLIB=":"
fi
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}windres; ac_word=$2
+ for ncn_progname in windres; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3970: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_WINDRES="${ncn_tool_prefix}windres"
+ ac_cv_prog_WINDRES="${ncn_tool_prefix}${ncn_progname}"
break
fi
done
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_WINDRES" ; then
- if test $build = $host ; then
- ncn_cv_WINDRES=$WINDRES
- # Extract the first word of "windres", so it can be a program name with args.
-set dummy windres; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_WINDRES" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4003: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then
+echo "configure:4001: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_WINDRES"; then
- ac_cv_prog_ncn_cv_WINDRES="$ncn_cv_WINDRES" # Let the user override the test.
+ if test -n "$WINDRES"; then
+ ac_cv_prog_WINDRES="$WINDRES" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_WINDRES="windres"
+ ac_cv_prog_WINDRES="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_WINDRES" && ac_cv_prog_ncn_cv_WINDRES="windres"
fi
fi
-ncn_cv_WINDRES="$ac_cv_prog_ncn_cv_WINDRES"
-if test -n "$ncn_cv_WINDRES"; then
- echo "$ac_t""$ncn_cv_WINDRES" 1>&6
+WINDRES="$ac_cv_prog_WINDRES"
+if test -n "$WINDRES"; then
+ echo "$ac_t""$WINDRES" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- WINDRES=$ncn_cv_WINDRES
+ fi
+ test -n "$ac_cv_prog_WINDRES" && break
+done
+
+if test -z "$ac_cv_prog_WINDRES" ; then
+ set dummy windres
+ if test $build = $host ; then
+ WINDRES="$2"
else
- WINDRES="${ncn_tool_prefix}windres"
+ WINDRES="${ncn_tool_prefix}$2"
fi
-else
- WINDRES="$ac_cv_prog_WINDRES"
fi
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}objcopy; ac_word=$2
+ for ncn_progname in objcopy; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4042: checking for $ac_word" >&5
+echo "configure:4045: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_OBJCOPY="${ncn_tool_prefix}objcopy"
+ ac_cv_prog_OBJCOPY="${ncn_tool_prefix}${ncn_progname}"
break
fi
done
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_OBJCOPY" ; then
- if test $build = $host ; then
- ncn_cv_OBJCOPY=$OBJCOPY
- # Extract the first word of "objcopy", so it can be a program name with args.
-set dummy objcopy; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_OBJCOPY" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4075: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then
+echo "configure:4076: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_OBJCOPY"; then
- ac_cv_prog_ncn_cv_OBJCOPY="$ncn_cv_OBJCOPY" # Let the user override the test.
+ if test -n "$OBJCOPY"; then
+ ac_cv_prog_OBJCOPY="$OBJCOPY" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_OBJCOPY="objcopy"
+ ac_cv_prog_OBJCOPY="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_OBJCOPY" && ac_cv_prog_ncn_cv_OBJCOPY="objcopy"
fi
fi
-ncn_cv_OBJCOPY="$ac_cv_prog_ncn_cv_OBJCOPY"
-if test -n "$ncn_cv_OBJCOPY"; then
- echo "$ac_t""$ncn_cv_OBJCOPY" 1>&6
+OBJCOPY="$ac_cv_prog_OBJCOPY"
+if test -n "$OBJCOPY"; then
+ echo "$ac_t""$OBJCOPY" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- OBJCOPY=$ncn_cv_OBJCOPY
+ fi
+ test -n "$ac_cv_prog_OBJCOPY" && break
+done
+
+if test -z "$ac_cv_prog_OBJCOPY" ; then
+ set dummy objcopy
+ if test $build = $host ; then
+ OBJCOPY="$2"
else
- OBJCOPY="${ncn_tool_prefix}objcopy"
+ OBJCOPY="${ncn_tool_prefix}$2"
fi
-else
- OBJCOPY="$ac_cv_prog_OBJCOPY"
fi
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}objdump; ac_word=$2
+ for ncn_progname in objdump; do
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4114: checking for $ac_word" >&5
+echo "configure:4120: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_OBJDUMP="${ncn_tool_prefix}objdump"
+ ac_cv_prog_OBJDUMP="${ncn_tool_prefix}${ncn_progname}"
break
fi
done
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_OBJDUMP" ; then
- if test $build = $host ; then
- ncn_cv_OBJDUMP=$OBJDUMP
- # Extract the first word of "objdump", so it can be a program name with args.
-set dummy objdump; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_OBJDUMP" && test $build = $host ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4147: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then
+echo "configure:4151: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_OBJDUMP"; then
- ac_cv_prog_ncn_cv_OBJDUMP="$ncn_cv_OBJDUMP" # Let the user override the test.
+ if test -n "$OBJDUMP"; then
+ ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_OBJDUMP="objdump"
+ ac_cv_prog_OBJDUMP="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_OBJDUMP" && ac_cv_prog_ncn_cv_OBJDUMP="objdump"
fi
fi
-ncn_cv_OBJDUMP="$ac_cv_prog_ncn_cv_OBJDUMP"
-if test -n "$ncn_cv_OBJDUMP"; then
- echo "$ac_t""$ncn_cv_OBJDUMP" 1>&6
+OBJDUMP="$ac_cv_prog_OBJDUMP"
+if test -n "$OBJDUMP"; then
+ echo "$ac_t""$OBJDUMP" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- OBJDUMP=$ncn_cv_OBJDUMP
+ fi
+ test -n "$ac_cv_prog_OBJDUMP" && break
+done
+
+if test -z "$ac_cv_prog_OBJDUMP" ; then
+ set dummy objdump
+ if test $build = $host ; then
+ OBJDUMP="$2"
else
- OBJDUMP="${ncn_tool_prefix}objdump"
+ OBJDUMP="${ncn_tool_prefix}$2"
fi
-else
- OBJDUMP="$ac_cv_prog_OBJDUMP"
fi
-# Target tools.
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}ar; ac_word=$2
+# Target tools. Do the tests using the names they may have passed in
+# the environment, then move it to CONFIGURED_*_FOR_TARGET.
+ for ncn_progname in ar; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4193: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4203: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CONFIGURED_AR_FOR_TARGET"; then
- ac_cv_prog_CONFIGURED_AR_FOR_TARGET="$CONFIGURED_AR_FOR_TARGET" # Let the user override the test.
+ if test -n "$AR_FOR_TARGET"; then
+ ac_cv_prog_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_AR_FOR_TARGET="${ncn_target_tool_prefix}ar"
+ ac_cv_prog_AR_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-CONFIGURED_AR_FOR_TARGET="$ac_cv_prog_CONFIGURED_AR_FOR_TARGET"
-if test -n "$CONFIGURED_AR_FOR_TARGET"; then
- echo "$ac_t""$CONFIGURED_AR_FOR_TARGET" 1>&6
+AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET"
+if test -n "$AR_FOR_TARGET"; then
+ echo "$ac_t""$AR_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_CONFIGURED_AR_FOR_TARGET" ; then
- if test $build = $target ; then
- ncn_cv_CONFIGURED_AR_FOR_TARGET=$CONFIGURED_AR_FOR_TARGET
- # Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_AR_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4226: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4234: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_CONFIGURED_AR_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET="$ncn_cv_CONFIGURED_AR_FOR_TARGET" # Let the user override the test.
+ if test -n "$AR_FOR_TARGET"; then
+ ac_cv_prog_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET="ar"
+ ac_cv_prog_AR_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET="ar"
fi
fi
-ncn_cv_CONFIGURED_AR_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET"
-if test -n "$ncn_cv_CONFIGURED_AR_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_CONFIGURED_AR_FOR_TARGET" 1>&6
+AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET"
+if test -n "$AR_FOR_TARGET"; then
+ echo "$ac_t""$AR_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- CONFIGURED_AR_FOR_TARGET=$ncn_cv_CONFIGURED_AR_FOR_TARGET
+ fi
+ test -n "$ac_cv_prog_AR_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_AR_FOR_TARGET" ; then
+ set dummy ar
+ if test $build = $target ; then
+ AR_FOR_TARGET="$2"
else
- CONFIGURED_AR_FOR_TARGET="${ncn_target_tool_prefix}ar"
+ AR_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
-else
- CONFIGURED_AR_FOR_TARGET="$ac_cv_prog_CONFIGURED_AR_FOR_TARGET"
fi
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}as; ac_word=$2
+ for ncn_progname in as; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4265: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4278: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CONFIGURED_AS_FOR_TARGET"; then
- ac_cv_prog_CONFIGURED_AS_FOR_TARGET="$CONFIGURED_AS_FOR_TARGET" # Let the user override the test.
+ if test -n "$AS_FOR_TARGET"; then
+ ac_cv_prog_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_AS_FOR_TARGET="${ncn_target_tool_prefix}as"
+ ac_cv_prog_AS_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-CONFIGURED_AS_FOR_TARGET="$ac_cv_prog_CONFIGURED_AS_FOR_TARGET"
-if test -n "$CONFIGURED_AS_FOR_TARGET"; then
- echo "$ac_t""$CONFIGURED_AS_FOR_TARGET" 1>&6
+AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET"
+if test -n "$AS_FOR_TARGET"; then
+ echo "$ac_t""$AS_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_CONFIGURED_AS_FOR_TARGET" ; then
- if test $build = $target ; then
- ncn_cv_CONFIGURED_AS_FOR_TARGET=$CONFIGURED_AS_FOR_TARGET
- # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_AS_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4298: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4309: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_CONFIGURED_AS_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET="$ncn_cv_CONFIGURED_AS_FOR_TARGET" # Let the user override the test.
+ if test -n "$AS_FOR_TARGET"; then
+ ac_cv_prog_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET="as"
+ ac_cv_prog_AS_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET="as"
fi
fi
-ncn_cv_CONFIGURED_AS_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET"
-if test -n "$ncn_cv_CONFIGURED_AS_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_CONFIGURED_AS_FOR_TARGET" 1>&6
+AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET"
+if test -n "$AS_FOR_TARGET"; then
+ echo "$ac_t""$AS_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- CONFIGURED_AS_FOR_TARGET=$ncn_cv_CONFIGURED_AS_FOR_TARGET
+ fi
+ test -n "$ac_cv_prog_AS_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_AS_FOR_TARGET" ; then
+ set dummy as
+ if test $build = $target ; then
+ AS_FOR_TARGET="$2"
else
- CONFIGURED_AS_FOR_TARGET="${ncn_target_tool_prefix}as"
+ AS_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
-else
- CONFIGURED_AS_FOR_TARGET="$ac_cv_prog_CONFIGURED_AS_FOR_TARGET"
fi
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2
+ for ncn_progname in cc gcc; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4337: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4353: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CONFIGURED_DLLTOOL_FOR_TARGET"; then
- ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET="$CONFIGURED_DLLTOOL_FOR_TARGET" # Let the user override the test.
+ if test -n "$CC_FOR_TARGET"; then
+ ac_cv_prog_CC_FOR_TARGET="$CC_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}dlltool"
+ ac_cv_prog_CC_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-CONFIGURED_DLLTOOL_FOR_TARGET="$ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET"
-if test -n "$CONFIGURED_DLLTOOL_FOR_TARGET"; then
- echo "$ac_t""$CONFIGURED_DLLTOOL_FOR_TARGET" 1>&6
+CC_FOR_TARGET="$ac_cv_prog_CC_FOR_TARGET"
+if test -n "$CC_FOR_TARGET"; then
+ echo "$ac_t""$CC_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET" ; then
- if test $build = $target ; then
- ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET=$CONFIGURED_DLLTOOL_FOR_TARGET
- # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_CC_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4370: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4384: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET="$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET" # Let the user override the test.
+ if test -n "$CC_FOR_TARGET"; then
+ ac_cv_prog_CC_FOR_TARGET="$CC_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET="dlltool"
+ ac_cv_prog_CC_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET="dlltool"
fi
fi
-ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET"
-if test -n "$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET" 1>&6
+CC_FOR_TARGET="$ac_cv_prog_CC_FOR_TARGET"
+if test -n "$CC_FOR_TARGET"; then
+ echo "$ac_t""$CC_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- CONFIGURED_DLLTOOL_FOR_TARGET=$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET
+ fi
+ test -n "$ac_cv_prog_CC_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_CC_FOR_TARGET" ; then
+ set dummy cc gcc
+ if test $build = $target ; then
+ CC_FOR_TARGET="$2"
else
- CONFIGURED_DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}dlltool"
+ CC_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
-else
- CONFIGURED_DLLTOOL_FOR_TARGET="$ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET"
fi
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}ld; ac_word=$2
+ for ncn_progname in c++ g++ cxx gxx; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4409: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4428: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CONFIGURED_LD_FOR_TARGET"; then
- ac_cv_prog_CONFIGURED_LD_FOR_TARGET="$CONFIGURED_LD_FOR_TARGET" # Let the user override the test.
+ if test -n "$CXX_FOR_TARGET"; then
+ ac_cv_prog_CXX_FOR_TARGET="$CXX_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_LD_FOR_TARGET="${ncn_target_tool_prefix}ld"
+ ac_cv_prog_CXX_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-CONFIGURED_LD_FOR_TARGET="$ac_cv_prog_CONFIGURED_LD_FOR_TARGET"
-if test -n "$CONFIGURED_LD_FOR_TARGET"; then
- echo "$ac_t""$CONFIGURED_LD_FOR_TARGET" 1>&6
+CXX_FOR_TARGET="$ac_cv_prog_CXX_FOR_TARGET"
+if test -n "$CXX_FOR_TARGET"; then
+ echo "$ac_t""$CXX_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_CONFIGURED_LD_FOR_TARGET" ; then
- if test $build = $target ; then
- ncn_cv_CONFIGURED_LD_FOR_TARGET=$CONFIGURED_LD_FOR_TARGET
- # Extract the first word of "ld", so it can be a program name with args.
-set dummy ld; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_CXX_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4442: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4459: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_CONFIGURED_LD_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET="$ncn_cv_CONFIGURED_LD_FOR_TARGET" # Let the user override the test.
+ if test -n "$CXX_FOR_TARGET"; then
+ ac_cv_prog_CXX_FOR_TARGET="$CXX_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET="ld"
+ ac_cv_prog_CXX_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET="ld"
fi
fi
-ncn_cv_CONFIGURED_LD_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET"
-if test -n "$ncn_cv_CONFIGURED_LD_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_CONFIGURED_LD_FOR_TARGET" 1>&6
+CXX_FOR_TARGET="$ac_cv_prog_CXX_FOR_TARGET"
+if test -n "$CXX_FOR_TARGET"; then
+ echo "$ac_t""$CXX_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- CONFIGURED_LD_FOR_TARGET=$ncn_cv_CONFIGURED_LD_FOR_TARGET
+ fi
+ test -n "$ac_cv_prog_CXX_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_CXX_FOR_TARGET" ; then
+ set dummy c++ g++ cxx gxx
+ if test $build = $target ; then
+ CXX_FOR_TARGET="$2"
else
- CONFIGURED_LD_FOR_TARGET="${ncn_target_tool_prefix}ld"
+ CXX_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
-else
- CONFIGURED_LD_FOR_TARGET="$ac_cv_prog_CONFIGURED_LD_FOR_TARGET"
fi
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}nm; ac_word=$2
+ for ncn_progname in dlltool; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4481: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4503: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CONFIGURED_NM_FOR_TARGET"; then
- ac_cv_prog_CONFIGURED_NM_FOR_TARGET="$CONFIGURED_NM_FOR_TARGET" # Let the user override the test.
+ if test -n "$DLLTOOL_FOR_TARGET"; then
+ ac_cv_prog_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_NM_FOR_TARGET="${ncn_target_tool_prefix}nm"
+ ac_cv_prog_DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-CONFIGURED_NM_FOR_TARGET="$ac_cv_prog_CONFIGURED_NM_FOR_TARGET"
-if test -n "$CONFIGURED_NM_FOR_TARGET"; then
- echo "$ac_t""$CONFIGURED_NM_FOR_TARGET" 1>&6
+DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET"
+if test -n "$DLLTOOL_FOR_TARGET"; then
+ echo "$ac_t""$DLLTOOL_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_CONFIGURED_NM_FOR_TARGET" ; then
- if test $build = $target ; then
- ncn_cv_CONFIGURED_NM_FOR_TARGET=$CONFIGURED_NM_FOR_TARGET
- # Extract the first word of "nm", so it can be a program name with args.
-set dummy nm; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4514: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4534: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_CONFIGURED_NM_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET="$ncn_cv_CONFIGURED_NM_FOR_TARGET" # Let the user override the test.
+ if test -n "$DLLTOOL_FOR_TARGET"; then
+ ac_cv_prog_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET="nm"
+ ac_cv_prog_DLLTOOL_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET="nm"
fi
fi
-ncn_cv_CONFIGURED_NM_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET"
-if test -n "$ncn_cv_CONFIGURED_NM_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_CONFIGURED_NM_FOR_TARGET" 1>&6
+DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET"
+if test -n "$DLLTOOL_FOR_TARGET"; then
+ echo "$ac_t""$DLLTOOL_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- CONFIGURED_NM_FOR_TARGET=$ncn_cv_CONFIGURED_NM_FOR_TARGET
+ fi
+ test -n "$ac_cv_prog_DLLTOOL_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" ; then
+ set dummy dlltool
+ if test $build = $target ; then
+ DLLTOOL_FOR_TARGET="$2"
else
- CONFIGURED_NM_FOR_TARGET="${ncn_target_tool_prefix}nm"
+ DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
-else
- CONFIGURED_NM_FOR_TARGET="$ac_cv_prog_CONFIGURED_NM_FOR_TARGET"
fi
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2
+ for ncn_progname in gcc; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4553: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4578: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CONFIGURED_RANLIB_FOR_TARGET"; then
- ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET="$CONFIGURED_RANLIB_FOR_TARGET" # Let the user override the test.
+ if test -n "$GCC_FOR_TARGET"; then
+ ac_cv_prog_GCC_FOR_TARGET="$GCC_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET="${ncn_target_tool_prefix}ranlib"
+ ac_cv_prog_GCC_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-CONFIGURED_RANLIB_FOR_TARGET="$ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET"
-if test -n "$CONFIGURED_RANLIB_FOR_TARGET"; then
- echo "$ac_t""$CONFIGURED_RANLIB_FOR_TARGET" 1>&6
+GCC_FOR_TARGET="$ac_cv_prog_GCC_FOR_TARGET"
+if test -n "$GCC_FOR_TARGET"; then
+ echo "$ac_t""$GCC_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET" ; then
- if test $build = $target ; then
- ncn_cv_CONFIGURED_RANLIB_FOR_TARGET=$CONFIGURED_RANLIB_FOR_TARGET
- # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_GCC_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4586: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4609: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET="$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET" # Let the user override the test.
+ if test -n "$GCC_FOR_TARGET"; then
+ ac_cv_prog_GCC_FOR_TARGET="$GCC_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET="ranlib"
+ ac_cv_prog_GCC_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET=":"
fi
fi
-ncn_cv_CONFIGURED_RANLIB_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET"
-if test -n "$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET" 1>&6
+GCC_FOR_TARGET="$ac_cv_prog_GCC_FOR_TARGET"
+if test -n "$GCC_FOR_TARGET"; then
+ echo "$ac_t""$GCC_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- CONFIGURED_RANLIB_FOR_TARGET=$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET
- else
- CONFIGURED_RANLIB_FOR_TARGET=":"
fi
-else
- CONFIGURED_RANLIB_FOR_TARGET="$ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET"
+ test -n "$ac_cv_prog_GCC_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_GCC_FOR_TARGET" ; then
+ GCC_FOR_TARGET="${CC_FOR_TARGET}"
fi
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}windres; ac_word=$2
+ for ncn_progname in gcj; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4625: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4648: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CONFIGURED_WINDRES_FOR_TARGET"; then
- ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET="$CONFIGURED_WINDRES_FOR_TARGET" # Let the user override the test.
+ if test -n "$GCJ_FOR_TARGET"; then
+ ac_cv_prog_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET="${ncn_target_tool_prefix}windres"
+ ac_cv_prog_GCJ_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-CONFIGURED_WINDRES_FOR_TARGET="$ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET"
-if test -n "$CONFIGURED_WINDRES_FOR_TARGET"; then
- echo "$ac_t""$CONFIGURED_WINDRES_FOR_TARGET" 1>&6
+GCJ_FOR_TARGET="$ac_cv_prog_GCJ_FOR_TARGET"
+if test -n "$GCJ_FOR_TARGET"; then
+ echo "$ac_t""$GCJ_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-fi
-if test -z "$ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET" ; then
- if test $build = $target ; then
- ncn_cv_CONFIGURED_WINDRES_FOR_TARGET=$CONFIGURED_WINDRES_FOR_TARGET
- # Extract the first word of "windres", so it can be a program name with args.
-set dummy windres; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_GCJ_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4658: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4679: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET="$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET" # Let the user override the test.
+ if test -n "$GCJ_FOR_TARGET"; then
+ ac_cv_prog_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET="windres"
+ ac_cv_prog_GCJ_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET="windres"
fi
fi
-ncn_cv_CONFIGURED_WINDRES_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET"
-if test -n "$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET" 1>&6
+GCJ_FOR_TARGET="$ac_cv_prog_GCJ_FOR_TARGET"
+if test -n "$GCJ_FOR_TARGET"; then
+ echo "$ac_t""$GCJ_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- CONFIGURED_WINDRES_FOR_TARGET=$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET
+ fi
+ test -n "$ac_cv_prog_GCJ_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_GCJ_FOR_TARGET" ; then
+ set dummy gcj
+ if test $build = $target ; then
+ GCJ_FOR_TARGET="$2"
else
- CONFIGURED_WINDRES_FOR_TARGET="${ncn_target_tool_prefix}windres"
+ GCJ_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
-else
- CONFIGURED_WINDRES_FOR_TARGET="$ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET"
fi
-
-
-
-
-
-
-
-
-
-
-
-# Fix up target tools.
+ for ncn_progname in gfortran; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4723: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$GFORTRAN_FOR_TARGET"; then
+ ac_cv_prog_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_GFORTRAN_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+GFORTRAN_FOR_TARGET="$ac_cv_prog_GFORTRAN_FOR_TARGET"
+if test -n "$GFORTRAN_FOR_TARGET"; then
+ echo "$ac_t""$GFORTRAN_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4754: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$GFORTRAN_FOR_TARGET"; then
+ ac_cv_prog_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_GFORTRAN_FOR_TARGET="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+GFORTRAN_FOR_TARGET="$ac_cv_prog_GFORTRAN_FOR_TARGET"
+if test -n "$GFORTRAN_FOR_TARGET"; then
+ echo "$ac_t""$GFORTRAN_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_GFORTRAN_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET" ; then
+ set dummy gfortran
+ if test $build = $target ; then
+ GFORTRAN_FOR_TARGET="$2"
+ else
+ GFORTRAN_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+fi
+
+ for ncn_progname in ld; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4798: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$LD_FOR_TARGET"; then
+ ac_cv_prog_LD_FOR_TARGET="$LD_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_LD_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+LD_FOR_TARGET="$ac_cv_prog_LD_FOR_TARGET"
+if test -n "$LD_FOR_TARGET"; then
+ echo "$ac_t""$LD_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_LD_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4829: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$LD_FOR_TARGET"; then
+ ac_cv_prog_LD_FOR_TARGET="$LD_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_LD_FOR_TARGET="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+LD_FOR_TARGET="$ac_cv_prog_LD_FOR_TARGET"
+if test -n "$LD_FOR_TARGET"; then
+ echo "$ac_t""$LD_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_LD_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_LD_FOR_TARGET" ; then
+ set dummy ld
+ if test $build = $target ; then
+ LD_FOR_TARGET="$2"
+ else
+ LD_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+fi
+
+ for ncn_progname in lipo; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4873: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$LIPO_FOR_TARGET"; then
+ ac_cv_prog_LIPO_FOR_TARGET="$LIPO_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_LIPO_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+LIPO_FOR_TARGET="$ac_cv_prog_LIPO_FOR_TARGET"
+if test -n "$LIPO_FOR_TARGET"; then
+ echo "$ac_t""$LIPO_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_LIPO_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4904: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$LIPO_FOR_TARGET"; then
+ ac_cv_prog_LIPO_FOR_TARGET="$LIPO_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_LIPO_FOR_TARGET="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+LIPO_FOR_TARGET="$ac_cv_prog_LIPO_FOR_TARGET"
+if test -n "$LIPO_FOR_TARGET"; then
+ echo "$ac_t""$LIPO_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_LIPO_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_LIPO_FOR_TARGET" ; then
+ set dummy lipo
+ if test $build = $target ; then
+ LIPO_FOR_TARGET="$2"
+ else
+ LIPO_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+fi
+
+ for ncn_progname in nm; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4948: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$NM_FOR_TARGET"; then
+ ac_cv_prog_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_NM_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+NM_FOR_TARGET="$ac_cv_prog_NM_FOR_TARGET"
+if test -n "$NM_FOR_TARGET"; then
+ echo "$ac_t""$NM_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_NM_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4979: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$NM_FOR_TARGET"; then
+ ac_cv_prog_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_NM_FOR_TARGET="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+NM_FOR_TARGET="$ac_cv_prog_NM_FOR_TARGET"
+if test -n "$NM_FOR_TARGET"; then
+ echo "$ac_t""$NM_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_NM_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_NM_FOR_TARGET" ; then
+ set dummy nm
+ if test $build = $target ; then
+ NM_FOR_TARGET="$2"
+ else
+ NM_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+fi
+
+ for ncn_progname in ranlib; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:5023: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB_FOR_TARGET"; then
+ ac_cv_prog_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+RANLIB_FOR_TARGET="$ac_cv_prog_RANLIB_FOR_TARGET"
+if test -n "$RANLIB_FOR_TARGET"; then
+ echo "$ac_t""$RANLIB_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:5054: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB_FOR_TARGET"; then
+ ac_cv_prog_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB_FOR_TARGET="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+RANLIB_FOR_TARGET="$ac_cv_prog_RANLIB_FOR_TARGET"
+if test -n "$RANLIB_FOR_TARGET"; then
+ echo "$ac_t""$RANLIB_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_RANLIB_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" ; then
+ RANLIB_FOR_TARGET=":"
+fi
+
+ for ncn_progname in strip; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:5093: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$STRIP_FOR_TARGET"; then
+ ac_cv_prog_STRIP_FOR_TARGET="$STRIP_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_STRIP_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+STRIP_FOR_TARGET="$ac_cv_prog_STRIP_FOR_TARGET"
+if test -n "$STRIP_FOR_TARGET"; then
+ echo "$ac_t""$STRIP_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_STRIP_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:5124: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$STRIP_FOR_TARGET"; then
+ ac_cv_prog_STRIP_FOR_TARGET="$STRIP_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_STRIP_FOR_TARGET="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+STRIP_FOR_TARGET="$ac_cv_prog_STRIP_FOR_TARGET"
+if test -n "$STRIP_FOR_TARGET"; then
+ echo "$ac_t""$STRIP_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_STRIP_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_STRIP_FOR_TARGET" ; then
+ set dummy strip
+ if test $build = $target ; then
+ STRIP_FOR_TARGET="$2"
+ else
+ STRIP_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+fi
+
+ for ncn_progname in windres; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:5168: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$WINDRES_FOR_TARGET"; then
+ ac_cv_prog_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_WINDRES_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+WINDRES_FOR_TARGET="$ac_cv_prog_WINDRES_FOR_TARGET"
+if test -n "$WINDRES_FOR_TARGET"; then
+ echo "$ac_t""$WINDRES_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:5199: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$WINDRES_FOR_TARGET"; then
+ ac_cv_prog_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_WINDRES_FOR_TARGET="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+WINDRES_FOR_TARGET="$ac_cv_prog_WINDRES_FOR_TARGET"
+if test -n "$WINDRES_FOR_TARGET"; then
+ echo "$ac_t""$WINDRES_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_WINDRES_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" ; then
+ set dummy windres
+ if test $build = $target ; then
+ WINDRES_FOR_TARGET="$2"
+ else
+ WINDRES_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+fi
+
+
+CONFIGURED_AR_FOR_TARGET="$AR_FOR_TARGET"
+CONFIGURED_AS_FOR_TARGET="$AS_FOR_TARGET"
+CONFIGURED_CC_FOR_TARGET="$CC_FOR_TARGET"
+CONFIGURED_CXX_FOR_TARGET="$CXX_FOR_TARGET"
+CONFIGURED_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET"
+CONFIGURED_GCC_FOR_TARGET="$GCC_FOR_TARGET"
+CONFIGURED_GCJ_FOR_TARGET="$GCJ_FOR_TARGET"
+CONFIGURED_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET"
+CONFIGURED_LD_FOR_TARGET="$LD_FOR_TARGET"
+CONFIGURED_LIPO_FOR_TARGET="$LIPO_FOR_TARGET"
+CONFIGURED_NM_FOR_TARGET="$NM_FOR_TARGET"
+CONFIGURED_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET"
+CONFIGURED_STRIP_FOR_TARGET="$STRIP_FOR_TARGET"
+CONFIGURED_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET"
+
+
+
+# Fix up target tools.
if test "x${build}" = "x${host}" ; then
# In this case, the newly built tools can and should be used,
# so we override the results of the autoconf tests.
# should also eliminate all of this cleanly.
AR_FOR_TARGET="\$(USUAL_AR_FOR_TARGET)"
AS_FOR_TARGET="\$(USUAL_AS_FOR_TARGET)"
+ CC_FOR_TARGET="\$(USUAL_CC_FOR_TARGET)"
+ CXX_FOR_TARGET="\$(USUAL_CXX_FOR_TARGET)"
+ RAW_CXX_FOR_TARGET="\$(USUAL_RAW_CXX_FOR_TARGET)"
DLLTOOL_FOR_TARGET="\$(USUAL_DLLTOOL_FOR_TARGET)"
+ GCC_FOR_TARGET="\$(USUAL_GCC_FOR_TARGET)"
+ GCJ_FOR_TARGET="\$(USUAL_GCJ_FOR_TARGET)"
+ GFORTRAN_FOR_TARGET="\$(USUAL_GFORTRAN_FOR_TARGET)"
LD_FOR_TARGET="\$(USUAL_LD_FOR_TARGET)"
+ LIPO_FOR_TARGET="\$(USUAL_LIPO_FOR_TARGET)"
NM_FOR_TARGET="\$(USUAL_NM_FOR_TARGET)"
RANLIB_FOR_TARGET="\$(USUAL_RANLIB_FOR_TARGET)"
+ STRIP_FOR_TARGET="\$(USUAL_STRIP_FOR_TARGET)"
WINDRES_FOR_TARGET="\$(USUAL_WINDRES_FOR_TARGET)"
else
# Just use the ones we found.
AR_FOR_TARGET="\$(CONFIGURED_AR_FOR_TARGET)"
AS_FOR_TARGET="\$(CONFIGURED_AS_FOR_TARGET)"
+ CC_FOR_TARGET="\$(CONFIGURED_CC_FOR_TARGET)"
+ CXX_FOR_TARGET="\$(CONFIGURED_CXX_FOR_TARGET)"
+ RAW_CXX_FOR_TARGET="\$(CONFIGURED_CXX_FOR_TARGET)"
DLLTOOL_FOR_TARGET="\$(CONFIGURED_DLLTOOL_FOR_TARGET)"
+ GCC_FOR_TARGET="\$(CONFIGURED_GCC_FOR_TARGET)"
+ GCJ_FOR_TARGET="\$(CONFIGURED_GCJ_FOR_TARGET)"
+ GFORTRAN_FOR_TARGET="\$(CONFIGURED_GFORTRAN_FOR_TARGET)"
LD_FOR_TARGET="\$(CONFIGURED_LD_FOR_TARGET)"
+ LIPO_FOR_TARGET="\$(CONFIGURED_LIPO_FOR_TARGET)"
NM_FOR_TARGET="\$(CONFIGURED_NM_FOR_TARGET)"
RANLIB_FOR_TARGET="\$(CONFIGURED_RANLIB_FOR_TARGET)"
+ STRIP_FOR_TARGET="\$(CONFIGURED_STRIP_FOR_TARGET)"
WINDRES_FOR_TARGET="\$(CONFIGURED_WINDRES_FOR_TARGET)"
fi
-
-
-
-
-
# Certain tools may need extra flags.
AR_FOR_TARGET=${AR_FOR_TARGET}${extra_arflags_for_target}
RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target}
NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:4743: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:5306: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
# gcc for stageN-gcc and stagePREV-gcc for stage(N-1). In case this is not
# possible, however, we can resort to mv.
echo $ac_n "checking if symbolic links between directories work""... $ac_c" 1>&6
-echo "configure:4790: checking if symbolic links between directories work" >&5
+echo "configure:5353: checking if symbolic links between directories work" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_ln_s_dir'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
s%@gmplibs@%$gmplibs%g
s%@gmpinc@%$gmpinc%g
s%@stage1_languages@%$stage1_languages%g
+s%@SYSROOT_CFLAGS_FOR_TARGET@%$SYSROOT_CFLAGS_FOR_TARGET%g
s%@CONFIGURED_BISON@%$CONFIGURED_BISON%g
s%@CONFIGURED_YACC@%$CONFIGURED_YACC%g
s%@CONFIGURED_M4@%$CONFIGURED_M4%g
s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g
s%@config_shell@%$config_shell%g
s%@AR@%$AR%g
-s%@ncn_cv_AR@%$ncn_cv_AR%g
s%@AS@%$AS%g
-s%@ncn_cv_AS@%$ncn_cv_AS%g
s%@DLLTOOL@%$DLLTOOL%g
-s%@ncn_cv_DLLTOOL@%$ncn_cv_DLLTOOL%g
s%@LD@%$LD%g
-s%@ncn_cv_LD@%$ncn_cv_LD%g
s%@NM@%$NM%g
-s%@ncn_cv_NM@%$ncn_cv_NM%g
s%@RANLIB@%$RANLIB%g
-s%@ncn_cv_RANLIB@%$ncn_cv_RANLIB%g
s%@WINDRES@%$WINDRES%g
-s%@ncn_cv_WINDRES@%$ncn_cv_WINDRES%g
s%@OBJCOPY@%$OBJCOPY%g
-s%@ncn_cv_OBJCOPY@%$ncn_cv_OBJCOPY%g
s%@OBJDUMP@%$OBJDUMP%g
-s%@ncn_cv_OBJDUMP@%$ncn_cv_OBJDUMP%g
s%@CXX@%$CXX%g
s%@CFLAGS_FOR_BUILD@%$CFLAGS_FOR_BUILD%g
+s%@AR_FOR_TARGET@%$AR_FOR_TARGET%g
+s%@AS_FOR_TARGET@%$AS_FOR_TARGET%g
+s%@CC_FOR_TARGET@%$CC_FOR_TARGET%g
+s%@CXX_FOR_TARGET@%$CXX_FOR_TARGET%g
+s%@DLLTOOL_FOR_TARGET@%$DLLTOOL_FOR_TARGET%g
+s%@GCC_FOR_TARGET@%$GCC_FOR_TARGET%g
+s%@GCJ_FOR_TARGET@%$GCJ_FOR_TARGET%g
+s%@GFORTRAN_FOR_TARGET@%$GFORTRAN_FOR_TARGET%g
+s%@LD_FOR_TARGET@%$LD_FOR_TARGET%g
+s%@LIPO_FOR_TARGET@%$LIPO_FOR_TARGET%g
+s%@NM_FOR_TARGET@%$NM_FOR_TARGET%g
+s%@RANLIB_FOR_TARGET@%$RANLIB_FOR_TARGET%g
+s%@STRIP_FOR_TARGET@%$STRIP_FOR_TARGET%g
+s%@WINDRES_FOR_TARGET@%$WINDRES_FOR_TARGET%g
s%@CONFIGURED_AR_FOR_TARGET@%$CONFIGURED_AR_FOR_TARGET%g
-s%@ncn_cv_CONFIGURED_AR_FOR_TARGET@%$ncn_cv_CONFIGURED_AR_FOR_TARGET%g
s%@CONFIGURED_AS_FOR_TARGET@%$CONFIGURED_AS_FOR_TARGET%g
-s%@ncn_cv_CONFIGURED_AS_FOR_TARGET@%$ncn_cv_CONFIGURED_AS_FOR_TARGET%g
+s%@CONFIGURED_CC_FOR_TARGET@%$CONFIGURED_CC_FOR_TARGET%g
+s%@CONFIGURED_CXX_FOR_TARGET@%$CONFIGURED_CXX_FOR_TARGET%g
s%@CONFIGURED_DLLTOOL_FOR_TARGET@%$CONFIGURED_DLLTOOL_FOR_TARGET%g
-s%@ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET@%$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET%g
+s%@CONFIGURED_GCC_FOR_TARGET@%$CONFIGURED_GCC_FOR_TARGET%g
+s%@CONFIGURED_GCJ_FOR_TARGET@%$CONFIGURED_GCJ_FOR_TARGET%g
+s%@CONFIGURED_GFORTRAN_FOR_TARGET@%$CONFIGURED_GFORTRAN_FOR_TARGET%g
s%@CONFIGURED_LD_FOR_TARGET@%$CONFIGURED_LD_FOR_TARGET%g
-s%@ncn_cv_CONFIGURED_LD_FOR_TARGET@%$ncn_cv_CONFIGURED_LD_FOR_TARGET%g
+s%@CONFIGURED_LIPO_FOR_TARGET@%$CONFIGURED_LIPO_FOR_TARGET%g
s%@CONFIGURED_NM_FOR_TARGET@%$CONFIGURED_NM_FOR_TARGET%g
-s%@ncn_cv_CONFIGURED_NM_FOR_TARGET@%$ncn_cv_CONFIGURED_NM_FOR_TARGET%g
s%@CONFIGURED_RANLIB_FOR_TARGET@%$CONFIGURED_RANLIB_FOR_TARGET%g
-s%@ncn_cv_CONFIGURED_RANLIB_FOR_TARGET@%$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET%g
+s%@CONFIGURED_STRIP_FOR_TARGET@%$CONFIGURED_STRIP_FOR_TARGET%g
s%@CONFIGURED_WINDRES_FOR_TARGET@%$CONFIGURED_WINDRES_FOR_TARGET%g
-s%@ncn_cv_CONFIGURED_WINDRES_FOR_TARGET@%$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET%g
-s%@GCC_FOR_TARGET@%$GCC_FOR_TARGET%g
s%@FLAGS_FOR_TARGET@%$FLAGS_FOR_TARGET%g
-s%@CC_FOR_TARGET@%$CC_FOR_TARGET%g
-s%@GCJ_FOR_TARGET@%$GCJ_FOR_TARGET%g
-s%@GFORTRAN_FOR_TARGET@%$GFORTRAN_FOR_TARGET%g
-s%@CXX_FOR_TARGET@%$CXX_FOR_TARGET%g
s%@RAW_CXX_FOR_TARGET@%$RAW_CXX_FOR_TARGET%g
-s%@CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@%$CXX_FOR_TARGET_FOR_RECURSIVE_MAKE%g
-s%@RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@%$RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE%g
-s%@AR_FOR_TARGET@%$AR_FOR_TARGET%g
-s%@AS_FOR_TARGET@%$AS_FOR_TARGET%g
-s%@DLLTOOL_FOR_TARGET@%$DLLTOOL_FOR_TARGET%g
-s%@LD_FOR_TARGET@%$LD_FOR_TARGET%g
-s%@NM_FOR_TARGET@%$NM_FOR_TARGET%g
-s%@RANLIB_FOR_TARGET@%$RANLIB_FOR_TARGET%g
-s%@WINDRES_FOR_TARGET@%$WINDRES_FOR_TARGET%g
s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
s%@MAINT@%$MAINT%g
OSDN Git Service
