-#! /bin/bash
-##############################################################################
-
-## This file is a shell script fragment that supplies the information
-## necessary to tailor a template configure script into the configure
-## script appropriate for this directory. For more information, check
-## any existing configure script.
-
-## Be warned, there are two types of configure.in files. There are those
-## used by Autoconf, which are macros which are expanded into a configure
-## script by autoconf. The other sort, of which this is one, is executed
-## by Cygnus configure.
-
-## For more information on these two systems, check out the documentation
-## for 'Autoconf' (autoconf.texi) and 'Configure' (configure.texi).
-
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998,
-# 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
+# 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
##############################################################################
+### WARNING: this file contains embedded tabs. Do not run untabify on this file.
+
+AC_INIT(move-if-change)
+AC_PREREQ(2.13)
+AC_CANONICAL_SYSTEM
+AC_ARG_PROGRAM
+
+sinclude(config/acx.m4)
+
+### we might need to use some other shell than /bin/sh for running subshells
+### If we are on Windows, search for the shell. This will permit people
+### to not have /bin/sh, but to be able to see /SOME/PATH/sh configure
+### without also having to set CONFIG_SHELL. This code will work when
+### using bash, which sets OSTYPE.
+case "${OSTYPE}" in
+*win32*)
+ if test x${CONFIG_SHELL} = x ; then
+ if test ! -f /bin/sh ; then
+ if test x${SHELL} != x && test -f ${SHELL} ; then
+ CONFIG_SHELL=${SHELL}
+ export CONFIG_SHELL
+ else
+ for prog in sh sh.exe bash bash.exe; do
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
+ for dir in $PATH; do
+ test -z "$dir" && dir=.
+ if test -f $dir/$prog; then
+ CONFIG_SHELL=$dir/$prog
+ export CONFIG_SHELL
+ break
+ fi
+ done
+ IFS="$save_ifs"
+ test -n "${CONFIG_SHELL}" && break
+ done
+ fi
+ fi
+ fi
+ ;;
+esac
+
+config_shell=${CONFIG_SHELL-/bin/sh}
+
+progname=$0
+# if PWD already has a value, it is probably wrong.
+if test -n "$PWD" ; then PWD=`${PWDCMD-pwd}`; fi
+
+# Export original configure arguments for use by sub-configures.
+TOPLEVEL_CONFIGURE_ARGUMENTS="$progname $@"
+AC_SUBST(TOPLEVEL_CONFIGURE_ARGUMENTS)
+
+moveifchange=${srcdir}/move-if-change
+
+# Set srcdir to "." if that's what it is.
+# This is important for multilib support.
+pwd=`${PWDCMD-pwd}`
+srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}`
+if test "${pwd}" = "${srcpwd}" ; then
+ srcdir=.
+fi
+
+topsrcdir=$srcpwd
+
+extra_host_args=
+# Define the trigger file to make sure configure will re-run whenever
+# the gcc version number changes.
+if test "${with_gcc_version_trigger+set}" = set ; then
+ gcc_version_trigger="$with_gcc_version_trigger"
+ gcc_version=`grep version_string ${with_gcc_version_trigger} | sed -e 's/.*\"\([[^ \"]]*\)[[ \"]].*/\1/'`
+else
+ # If gcc's sources are available, define the trigger file.
+ if test -f ${topsrcdir}/gcc/version.c ; then
+ gcc_version_trigger=${topsrcdir}/gcc/version.c
+ gcc_version=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([[^ \"]]*\)[[ \"]].*/\1/'`
+ case "$ac_configure_args" in
+ *--with-gcc-version-trigger=$gcc_version_trigger* )
+ ;;
+ * )
+ # Add to all subconfigure arguments: build, host, and target.
+ ac_configure_args="$ac_configure_args --with-gcc-version-trigger=$gcc_version_trigger"
+ ;;
+ esac
+ fi
+fi
### To add a new directory to the tree, first choose whether it is a target
### or a host dependent tool. Then put it into the appropriate list
-### (library or tools, host or target), doing a dependency sort. For
-### example, gdb requires that byacc (or bison) be built first, so it is in
-### the ${host_tools} list after byacc and bison.
+### (library or tools, host or target), doing a dependency sort.
+
+# Subdirs will be configured in the order listed in build_configdirs,
+# configdirs, or target_configdirs; see the serialization section below.
+# Dependency sorting is only needed when *configuration* must be done in
+# a particular order. In all cases a dependency should be specified in
+# the Makefile, whether or not it's implicitly specified here.
+
+# Double entries in build_configdirs, configdirs, or target_configdirs may
+# cause circular dependencies and break everything horribly.
# these libraries are used by various programs built for the host environment
#
-host_libs="intl mmalloc libiberty opcodes bfd readline db tcl tk tclX itcl tix libgui zlib"
-
-libstdcxx_version="target-libstdc++-v3"
+host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl tix libgui zlib"
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
# know that we are building the simulator.
-host_tools="texinfo byacc flex bison binutils ld gas gcc cgen sid sim gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool ispell grep diff rcs cvssrc fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils snavigator libtool gettext zip fastjar"
+# binutils, gas and ld appear in that order because it makes sense to run
+# "make check" in that particular order.
+host_tools="texinfo byacc flex bison binutils gas ld gcc sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar"
# libgcj represents the runtime libraries only used by gcj.
libgcj="target-libffi \
target_libs="target-libiberty \
target-libgloss \
target-newlib \
- ${libstdcxx_version} \
+ target-libstdc++-v3 \
target-libf2c \
- ${libgcj}
+ ${libgcj} \
target-libobjc"
# these tools are built using the target libs, and are intended to run only
# list belongs in this list. those programs are also very likely
# candidates for the "native_only" list which follows
#
-target_tools="target-examples target-groff target-gperf"
+target_tools="target-examples target-groff target-gperf target-rda"
################################################################################
-## These two lists are of directories that are to be removed from the
-## ${configdirs} list for either cross-compilations or for native-
-## compilations. For example, it doesn't make that much sense to
-## cross-compile Emacs, nor is it terribly useful to compile target-libiberty in
-## a native environment.
-
-# directories to be built in the native environment only
-#
-# This must be a single line because of the way it is searched by grep in
-# the code below.
-native_only="autoconf automake libtool cvssrc fileutils find gawk gettext grep gzip hello indent ispell m4 rcs recode sed shellutils tar textutils uudecode wdiff gprof target-groff guile perl apache inet time ash bash bzip2 prms snavigator gnuserv target-gperf"
-
-# directories to be built in a cross environment only
-#
-cross_only="target-libgloss target-newlib target-cygmon target-opcodes target-libstub"
-
## All tools belong in one of the four categories, and are assigned above
## We assign ${configdirs} this way to remove all embedded newlines. This
## is important because configure will choke if they ever get through.
################################################################################
-srctrigger=move-if-change
srcname="gnu development package"
# This gets set non-empty for some net releases of packages.
appdirs=""
-# per-host:
-
-# There is no longer anything interesting in the per-host section.
-
-# per-target:
-
# Define is_cross_compiler to save on calls to 'test'.
is_cross_compiler=
if test x"${host}" = x"${target}" ; then
is_cross_compiler=yes
fi
-# Work in distributions that contain no compiler tools, like Autoconf.
-tentative_cc=""
-if test -d ${srcdir}/config ; then
-case "${host}" in
- m68k-hp-hpux*)
- # Avoid "too much defining" errors from HPUX compiler.
- tentative_cc="cc -Wp,-H256000"
- host_makefile_frag="config/mh-hp300"
- ;;
- m68k-apollo-sysv*)
- tentative_cc="cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DUSG"
- host_makefile_frag="config/mh-apollo68"
- ;;
- m68k-apollo-bsd*)
- #None of the Apollo compilers can compile gas or binutils. The preprocessor
- # chokes on bfd, the compiler won't let you assign integers to enums, and
- # other problems. Defining CC to gcc is a questionable way to say "don't use
- # the apollo compiler" (the preferred version of GCC could be called cc,
- # or whatever), but I'm not sure leaving CC as cc is any better...
- #CC=cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DNO_STDARG
- tentative_cc=gcc
- host_makefile_frag="config/mh-a68bsd"
+# We always want to use the same name for this directory, so that dejagnu
+# can reliably find it.
+target_subdir=${target_alias}
+
+if test ! -d ${target_subdir} ; then
+ if mkdir ${target_subdir} ; then true
+ else
+ echo "'*** could not make ${PWD=`${PWDCMD-pwd}`}/${target_subdir}" 1>&2
+ exit 1
+ fi
+fi
+
+build_prefix=build-
+build_subdir=${build_prefix}${build_alias}
+
+if test x"${build_alias}" != x"${host}" ; then
+ if test ! -d ${build_subdir} ; then
+ if mkdir ${build_subdir} ; then true
+ else
+ echo "'*** could not make ${PWD=`${PWDCMD-pwd}`}/${build_subdir}" 1>&2
+ exit 1
+ fi
+ fi
+fi
+
+# Skipdirs are removed silently.
+skipdirs=
+# Noconfigdirs are removed loudly.
+noconfigdirs=""
+
+use_gnu_ld=
+# Make sure we don't let GNU ld be added if we didn't want it.
+if test x$with_gnu_ld = xno ; then
+ use_gnu_ld=no
+ noconfigdirs="$noconfigdirs ld"
+fi
+
+use_gnu_as=
+# Make sure we don't let GNU as be added if we didn't want it.
+if test x$with_gnu_as = xno ; then
+ use_gnu_as=no
+ noconfigdirs="$noconfigdirs gas"
+fi
+
+# some tools are so dependent upon X11 that if we're not building with X,
+# it's not even worth trying to configure, much less build, that tool.
+
+case ${with_x} in
+ yes | "") ;; # the default value for this tree is that X11 is available
+ no)
+ skipdirs="${skipdirs} tk tix itcl libgui"
+ # We won't be able to build gdbtk without X.
+ enable_gdbtk=no
;;
- m88k-dg-dgux*)
- tentative_cc="gcc -Wall -ansi -D__using_DGUX"
- host_makefile_frag="config/mh-dgux"
+ *) echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2 ;;
+esac
+
+# Some tools are only suitable for building in a "native" situation.
+# Remove these if host!=target.
+native_only="autoconf automake libtool fileutils find gawk gettext gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff gprof target-groff guile perl time ash bash bzip2 prms gnuserv target-gperf"
+
+# Similarly, some are only suitable for cross toolchains.
+# Remove these if host=target.
+cross_only="target-libgloss target-newlib target-opcodes"
+
+case $is_cross_compiler in
+ no) skipdirs="${skipdirs} ${cross_only}" ;;
+ yes) skipdirs="${skipdirs} ${native_only}" ;;
+esac
+
+# If both --with-headers and --with-libs are specified, default to
+# --without-newlib.
+if test x"${with_headers}" != x && test x"${with_libs}" != x ; then
+ if test x"${with_newlib}" = x ; then
+ with_newlib=no
+ fi
+fi
+
+# Recognize --with-newlib/--without-newlib.
+case ${with_newlib} in
+ no) skipdirs="${skipdirs} target-newlib" ;;
+ yes) skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` ;;
+esac
+
+# Configure extra directories which are host specific
+
+case "${host}" in
+ *-cygwin*)
+ configdirs="$configdirs libtermcap" ;;
+esac
+
+# Remove more programs from consideration, based on the host or
+# target this usually means that a port of the program doesn't
+# exist yet.
+
+case "${host}" in
+ hppa*64*-*-*)
+ noconfigdirs="$noconfigdirs byacc"
;;
- m88k-harris-cxux*)
- # Under CX/UX, we want to tell the compiler to use ANSI mode.
- tentative_cc="cc -Xa"
- host_makefile_frag="config/mh-cxux"
+ i[[3456]]86-*-vsta)
+ noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl tix gnuserv gettext"
;;
- m88k-motorola-sysv*)
- host_makefile_frag="config/mh-delta88"
+ i[[3456]]86-*-go32* | i[[3456]]86-*-msdosdjgpp*)
+ noconfigdirs="tcl tk expect dejagnu send-pr uudecode guile itcl tix gnuserv libffi"
;;
- mips*-dec-ultrix*)
- tentative_cc="cc -Wf,-XNg1000"
- host_makefile_frag="config/mh-decstation"
+ i[[3456]]86-*-mingw32*)
+ # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl tix gnuserv"
+ noconfigdirs="expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool"
;;
- mips*-nec-sysv4*)
- # The C compiler on NEC MIPS SVR4 needs bigger tables.
- tentative_cc="cc -ZXNd=5000 -ZXNg=1000"
- host_makefile_frag="config/mh-necv4"
+ i[[3456]]86-*-beos*)
+ noconfigdirs="$noconfigdirs tk itcl tix libgui gdb"
;;
- mips*-sgi-irix6*)
- host_makefile_frag="config/mh-irix6"
+ *-*-cygwin*)
+ noconfigdirs="autoconf automake send-pr rcs guile perl"
;;
- mips*-sgi-irix5*)
- host_makefile_frag="config/mh-irix5"
+ *-*-netbsd*)
+ noconfigdirs="rcs"
;;
- mips*-sgi-irix4*)
- # Tell compiler to use K&R C. We can't compile under the SGI Ansi
- # environment. Also bump switch table size so that cp-parse will
- # compile. Bump string length limit so linker builds.
- tentative_cc="cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000 -Wf,-XNl8192"
+ ppc*-*-pe)
+ noconfigdirs="patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl tix gnuserv"
;;
- mips*-sgi-irix3*)
- host_makefile_frag="config/mh-sysv"
+ powerpc-*-beos*)
+ noconfigdirs="$noconfigdirs tk itcl tix libgui gdb dejagnu readline"
;;
- mips*-*-sysv4*)
- host_makefile_frag="config/mh-sysv4"
+ *-*-darwin*)
+ noconfigdirs="$noconfigdirs tk itcl tix libgui"
;;
- mips*-*-sysv*)
- # This is for a MIPS running RISC/os 4.52C.
+esac
- # This is needed for GDB, but needs to be in the top-level make because
- # if a library is compiled with the bsd headers and gets linked with the
- # sysv system libraries all hell can break loose (e.g. a jmp_buf might be
- # a different size).
- # ptrace(2) apparently has problems in the BSD environment. No workaround is
- # known except to select the sysv environment. Could we use /proc instead?
- # These "sysv environments" and "bsd environments" often end up being a pain.
- #
- # This is not part of CFLAGS because perhaps not all C compilers have this
- # option.
- tentative_cc="cc -systype sysv"
- host_makefile_frag="config/mh-riscos"
+# Save it here so that, even in case of --enable-libgcj, if the Java
+# front-end isn't enabled, we still get libgcj disabled.
+libgcj_saved=$libgcj
+case $enable_libgcj in
+yes)
+ # If we reset it here, it won't get added to noconfigdirs in the
+ # target-specific build rules, so it will be forcibly enabled
+ # (unless the Java language itself isn't enabled).
+ libgcj=
+ ;;
+no)
+ # Make sure we get it printed in the list of not supported target libs.
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+esac
+
+case "${target}" in
+ *-*-chorusos)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
- i370-ibm-opened*)
- tentative_cc="c89"
- host_makefile_frag="config/mh-openedition"
+ *-*-darwin*)
+ noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
+ noconfigdirs="$noconfigdirs target-libobjc ${libgcj}"
;;
- i[3456]86-*-sysv5*)
- host_makefile_frag="config/mh-sysv5"
+ *-*-freebsd[[12]] | *-*-freebsd[[12]].* | *-*-freebsd*aout*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
- i[3456]86-*-dgux*)
- tentative_cc="gcc -Wall -ansi -D__using_DGUX"
- host_makefile_frag="config/mh-dgux386"
+ *-*-kaos*)
+ # Remove unsupported stuff on all kaOS configurations.
+ skipdirs="target-libiberty ${libgcj} target-libstdc++-v3 target-libf2c target-librx"
+ skipdirs="$skipdirs target-libobjc target-examples target-groff target-gperf"
+ skipdirs="$skipdirs zlib fastjar target-libjava target-boehm-gc target-zlib"
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
- i[3456]86-ncr-sysv4.3*)
- # The MetaWare compiler will generate a copyright message unless you
- # turn it off by adding the -Hnocopyr flag.
- tentative_cc="cc -Hnocopyr"
- host_makefile_frag="config/mh-ncrsvr43"
+ *-*-netbsd*)
+ # Skip some stuff on all NetBSD configurations.
+ noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss"
+
+ # Skip some stuff that's unsupported on some NetBSD configurations.
+ case "${target}" in
+ i*86-*-netbsdelf*) ;;
+ arm*-*-netbsdelf*) ;;
+ *)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ esac
;;
- i[3456]86-ncr-sysv4*)
- # for an NCR 3000 (i486/SVR4) system.
- # The NCR 3000 ships with a MetaWare compiler installed as /bin/cc.
- # This compiler not only emits obnoxious copyright messages every time
- # you run it, but it chokes and dies on a whole bunch of GNU source
- # files. Default to using the AT&T compiler installed in /usr/ccs/ATT/cc.
- tentative_cc="/usr/ccs/ATT/cc"
- host_makefile_frag="config/mh-ncr3000"
+ *-*-netware)
+ noconfigdirs="$noconfigdirs target-libstdc++-v3 target-newlib target-libiberty target-libgloss ${libgcj}"
;;
- i[3456]86-*-sco3.2v5*)
- host_makefile_frag="config/mh-sysv"
+ *-*-rtems*)
+ noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+ case ${target} in
+ h8300*-*-* | h8500-*-*)
+ noconfigdirs="$noconfigdirs target-libf2c"
+ ;;
+ *) ;;
+ esac
;;
- i[3456]86-*-sco*)
- # The native C compiler botches some simple uses of const. Unfortunately,
- # it doesn't defined anything like "__sco__" for us to test for in ansidecl.h.
- tentative_cc="cc -Dconst="
- host_makefile_frag="config/mh-sco"
+ *-*-vxworks*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
- i[3456]86-*-udk*)
- host_makefile_frag="config/mh-sysv5"
+ alpha*-dec-osf*)
+ # ld works, but does not support shared libraries.
+ # newlib is not 64 bit ready. I'm not sure about fileutils.
+ # gas doesn't generate exception information.
+ noconfigdirs="$noconfigdirs gas ld fileutils target-newlib target-libgloss"
;;
- i[3456]86-*-isc*)
- host_makefile_frag="config/mh-sysv"
+ alpha*-*-*vms*)
+ noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss ${libgcj}"
;;
- i[3456]86-*-solaris2*)
- host_makefile_frag="config/mh-sysv4"
+ alpha*-*-linux*)
+ # newlib is not 64 bit ready
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
- i[3456]86-*-aix*)
- host_makefile_frag="config/mh-aix386"
+ alpha*-*-freebsd*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
- i[3456]86-*-msdosdjgpp*)
- host_makefile_frag="config/mh-djgpp"
+ alpha*-*-*)
+ # newlib is not 64 bit ready
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
- *-cygwin*)
- host_makefile_frag="config/mh-cygwin"
+ sh-*-linux*)
+ noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
+ ;;
+ sh*-*-pe|mips*-*-pe|*arm-wince-pe)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ noconfigdirs="$noconfigdirs target-examples"
+ noconfigdirs="$noconfigdirs target-libiberty texinfo send-pr"
+ noconfigdirs="$noconfigdirs tcl tix tk itcl libgui sim"
+ noconfigdirs="$noconfigdirs expect dejagnu"
+ # the C++ libraries don't build on top of CE's C libraries
+ noconfigdirs="$noconfigdirs target-libstdc++-v3"
+ noconfigdirs="$noconfigdirs target-newlib"
+ case "${host}" in
+ *-*-cygwin*) ;; # keep gdb and readline
+ *) noconfigdirs="$noconfigdirs gdb readline"
+ ;;
+ esac
;;
- *-mingw32*)
- host_makefile_frag="config/mh-mingw32"
+ arc-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
- *-interix*)
- host_makefile_frag="config/mh-interix"
+ arm-*-coff | strongarm-*-coff | xscale-*-coff)
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
- vax-*-ultrix2*)
- # The old BSD pcc isn't up to compiling parts of gdb so use gcc
- tentative_cc=gcc
+ arm-*-elf* | strongarm-*-elf* | xscale-*-elf*)
+ noconfigdirs="$noconfigdirs target-libffi target-qthreads"
;;
- *-*-solaris2*)
- host_makefile_frag="config/mh-solaris"
+ arm-*-pe*)
+ noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
- m68k-sun-sunos*)
- # Sun's C compiler needs the -J flag to be able to compile cp-parse.c
- # without overflowing the jump tables (-J says to use a 32 bit table)
- tentative_cc="cc -J"
+ arm-*-oabi*)
+ noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
- *-hp-hpux[78]*)
- tentative_cc="cc -Wp,-H256000"
- host_makefile_frag="config/mh-hpux8"
+ thumb-*-coff)
+ noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
- *-hp-hpux*)
- tentative_cc="cc -Wp,-H256000"
- host_makefile_frag="config/mh-hpux"
+ thumb-*-elf)
+ noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
- *-*-hiux*)
- tentative_cc="cc -Wp,-H256000"
- host_makefile_frag="config/mh-hpux"
+ thumb-*-oabi)
+ noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
- rs6000-*-lynxos*)
- # /bin/cc is less than useful for our purposes. Always use GCC
- tentative_cc="/usr/cygnus/progressive/bin/gcc"
- host_makefile_frag="config/mh-lynxrs6k"
+ thumb-*-pe)
+ noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
- *-*-lynxos*)
- # /bin/cc is less than useful for our purposes. Always use GCC
- tentative_cc="/bin/gcc"
+ arm-*-riscix*)
+ noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
;;
- *-*-sysv4*)
- host_makefile_frag="config/mh-sysv4"
+ avr-*-*)
+ noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
;;
- *-*-sysv*)
- host_makefile_frag="config/mh-sysv"
+ c4x-*-* | tic4x-*-*)
+ noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
;;
-esac
-fi
-
-# If we aren't going to be using gcc, see if we can extract a definition
-# of CC from the fragment.
-# Actually, use the 'pre-extracted' version above.
-if test -z "${CC}" && test "${build}" = "${host}" ; then
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- found=
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/gcc; then
- found=yes
- break
- fi
- done
- IFS="$save_ifs"
- if test -z "${found}" && test -n "${tentative_cc}" ; then
- CC=$tentative_cc
- fi
-fi
-
-# We default to --with-shared on platforms where -fpic is meaningless.
-# Well, we don't yet, but we will.
-if false && test "${host}" = "${target}" && test x${enable_shared} = x ; then
- case "${target}" in
- alpha*-dec-osf*) enable_shared=yes ;;
- alpha*-*-linux*) enable_shared=yes ;;
- mips-sgi-irix5*) enable_shared=yes ;;
- *) enable_shared=no ;;
- esac
-fi
-
-# hpux11 in 64bit mode has libraries in a weird place. Arrange to find
-# them automatically.
-case "${host}" in
- hppa*64*-*-hpux11*)
- withoptions="$withoptions -x-libraries=/usr/lib/pa20_64 -x-includes=/usr/X11R6/include"
+ c54x*-*-* | tic54x-*-*)
+ noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib"
;;
-esac
-
-case "${enable_shared}" in
- yes) shared=yes ;;
- no) shared=no ;;
- "") shared=no ;;
- *) shared=yes ;;
-esac
-
-rm -f mh-frag
-if test -n "${host_makefile_frag}" ; then
- for f in ${host_makefile_frag}
- do
- cat ${srcdir}/$f >> mh-frag
- done
- host_makefile_frag=mh-frag
-fi
-
-case "${target}" in
- v810*)
- target_makefile_frag="${target_makefile_frag} config/mt-v810"
+ cris-*-*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
- i[3456]86-*-netware*)
- target_makefile_frag="${target_makefile_frag} config/mt-netware"
+ d10v-*-*)
+ noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
;;
- powerpc-*-netware*)
- target_makefile_frag="${target_makefile_frag} config/mt-netware"
+ d30v-*-*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
- alpha*-*-linux*)
- target_makefile_frag="${target_makefile_frag} config/mt-linux"
- target_makefile_frag="${target_makefile_frag} config/mt-alphaieee"
+ fr30-*-elf*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
- alpha*-*-*)
- target_makefile_frag="${target_makefile_frag} config/mt-alphaieee"
+ frv-*-*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
- *-*-linux*)
- target_makefile_frag="${target_makefile_frag} config/mt-linux"
+ h8300*-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
- *-*-aix4.[3456789]* | *-*-aix[56789].*)
- target_makefile_frag="${target_makefile_frag} config/mt-aix43"
+ h8500-*-*)
+ noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} target-libf2c"
;;
- mips*-*-pe | sh*-*-pe | *arm-wince-pe)
- target_makefile_frag="${target_makefile_frag} config/mt-wince"
+ hppa*64*-*-linux* | parisc*64*-*-linux*)
+ # In this case, it's because the hppa64-linux target is for
+ # the kernel only at this point and has no libc, and thus no
+ # headers, crt*.o, etc., all of which are needed by these.
+ noconfigdirs="$noconfigdirs target-zlib"
;;
-esac
-
-# If --enable-target-optspace always use -Os instead of -O2 to build
-# the target libraries, similarly if it is not specified, use -Os
-# on selected platforms.
-case "${enable_target_optspace}:${target}" in
- yes:*)
- target_makefile_frag="${target_makefile_frag} config/mt-ospace"
+ hppa*-*-*elf* | \
+ parisc*-*-linux* | hppa*-*-linux* | \
+ hppa*-*-lites* | \
+ hppa*-*-openbsd* | \
+ hppa*64*-*-*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ # Do configure ld/binutils/gas for this case.
;;
- :d30v-*)
- target_makefile_frag="${target_makefile_frag} config/mt-d30v"
+ hppa*-*-*)
+ # According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
+ # build on HP-UX 10.20.
+ noconfigdirs="$noconfigdirs ld shellutils ${libgcj}"
;;
- :m32r-* | :d10v-* | :fr30-*)
- target_makefile_frag="${target_makefile_frag} config/mt-ospace"
+ ia64*-*-elf*)
+ # No gdb support yet.
+ noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb"
;;
- no:* | :*)
+ ia64*-**-hpux*)
+ # No gdb or ld support yet.
+ noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb ld"
;;
- *)
- echo "*** bad value \"${enable_target_optspace}\" for --enable-target-optspace flag; ignored" 1>&2
+ i[[3456]]86-*-coff | i[[3456]]86-*-elf)
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
-esac
-
-skipdirs=
-use_gnu_ld=
-use_gnu_as=
-
-# some tools are so dependent upon X11 that if we're not building with X,
-# it's not even worth trying to configure, much less build, that tool.
-
-case ${with_x} in
- yes | "") # the default value for this tree is that X11 is available
- ;;
- no)
- skipdirs="${skipdirs} tk libgui"
- ;;
- *)
- echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2
- ;;
-esac
-
-# Some tools are only suitable for building in a "native" situation.
-# Those are added when we have a host==target configuration. For cross
-# toolchains, we add some directories that should only be useful in a
-# cross-compiler.
-
-case $is_cross_compiler in
- no) skipdirs="${skipdirs} ${cross_only}" ;;
- yes) skipdirs="${skipdirs} ${native_only}" ;;
-esac
-
-# We always want to use the same name for this directory, so that dejagnu
-# can reliably find it.
-target_subdir=${target_alias}
-
-if test ! -d ${target_subdir} ; then
- if mkdir ${target_subdir} ; then true
- else
- echo "'*** could not make ${PWD=`${PWDCMD-pwd}`}/${target_subdir}" 1>&2
- exit 1
- fi
-fi
-
-build_subdir=${build_alias}
+ i[[34567]]86-*-freebsd*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ i[[3456]]86-*-linux*)
+ # The GCC port for glibc1 has no MD_FALLBACK_FRAME_STATE_FOR, so let's
+ # not build java stuff by default.
+ case "${target}" in
+ *-*-*libc1*)
+ noconfigdirs="$noconfigdirs ${libgcj}";;
+ esac
-if test x"${build_alias}" != x"${host}" ; then
- if test ! -d ${build_subdir} ; then
- if mkdir ${build_subdir} ; then true
- else
- echo "'*** could not make ${PWD=`${PWDCMD-pwd}`}/${build_subdir}" 1>&2
- exit 1
+ # This section makes it possible to build newlib natively on linux.
+ # If we are using a cross compiler then don't configure newlib.
+ if test x${is_cross_compiler} != xno ; then
+ noconfigdirs="$noconfigdirs target-newlib"
fi
- fi
-fi
-
-copy_dirs=
-
-# Handle --with-headers=XXX. The contents of the named directory are
-# copied to $(tooldir)/sys-include.
-if test x"${with_headers}" != x ; then
- if test x${is_cross_compiler} = xno ; then
- echo 1>&2 '***' --with-headers is only supported when cross compiling
- exit 1
- fi
- case "${exec_prefixoption}" in
- "") x=${prefix} ;;
- *) x=${exec_prefix} ;;
- esac
- copy_dirs="${copy_dirs} ${with_headers} $x/${target_alias}/sys-include"
-fi
-
-# Handle --with-libs=XXX. Multiple directories are permitted. The
-# contents are copied to $(tooldir)/lib.
-if test x"${with_libs}" != x ; then
- if test x${is_cross_compiler} = xno ; then
- echo 1>&2 '***' --with-libs is only supported when cross compiling
- exit 1
- fi
- # Copy the libraries in reverse order, so that files in the first named
- # library override files in subsequent libraries.
- case "${exec_prefixoption}" in
- "") x=${prefix} ;;
- *) x=${exec_prefix} ;;
- esac
- for l in ${with_libs}; do
- copy_dirs="$l $x/${target_alias}/lib ${copy_dirs}"
- done
-fi
+ noconfigdirs="$noconfigdirs target-libgloss"
+ # If we are not using a cross compiler, do configure newlib.
+ # Note however, that newlib will only be configured in this situation
+ # if the --with-newlib option has been given, because otherwise
+ # 'target-newlib' will appear in skipdirs.
+ ;;
+ i[[3456]]86-*-mingw32*)
+ target_configdirs="$target_configdirs target-mingw"
+ noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj}"
-# Handle ${copy_dirs}
-set fnord ${copy_dirs}
-shift
-while test $# != 0 ; do
- if test -f $2/COPIED && test x"`cat $2/COPIED`" = x"$1" ; then
- :
- else
- echo Copying $1 to $2
+ # Can't build gdb for mingw32 if not native.
+ case "${host}" in
+ i[[3456]]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
+ *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix gnuserv"
+ ;;
+ esac
+ ;;
+ *-*-cygwin*)
+ target_configdirs="$target_configdirs target-libtermcap target-winsup"
+ noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}"
+ # always build newlib.
+ skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
- # Use the install script to create the directory and all required
- # parent directories.
- if test -d $2 ; then
- :
- else
- echo >config.temp
- ${srcdir}/install-sh -c -m 644 config.temp $2/COPIED
- fi
-
- # Copy the directory, assuming we have tar.
- # FIXME: Should we use B in the second tar? Not all systems support it.
- (cd $1; tar -cf - .) | (cd $2; tar -xpf -)
-
- # It is the responsibility of the user to correctly adjust all
- # symlinks. If somebody can figure out how to handle them correctly
- # here, feel free to add the code.
-
- echo $1 > $2/COPIED
- fi
- shift; shift
-done
-
-# If both --with-headers and --with-libs are specified, default to
-# --without-newlib.
-if test x"${with_headers}" != x && test x"${with_libs}" != x ; then
- if test x"${with_newlib}" = x ; then
- with_newlib=no
- fi
-fi
-
-# Recognize --with-newlib/--without-newlib.
-case ${with_newlib} in
- no) skipdirs="${skipdirs} target-newlib" ;;
- yes) skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` ;;
-esac
-
-# Default to using --with-stabs for certain targets.
-if test x${with_stabs} = x ; then
- case "${target}" in
- mips*-*-irix6*)
- ;;
- mips*-*-* | alpha*-*-osf*)
- with_stabs=yes;
- withoptions="${withoptions} --with-stabs"
- ;;
- esac
-fi
-
-# Configure extra directories which are host specific
-
-case "${host}" in
- i[3456]86-*-go32*)
- configdirs="$configdirs dosrel" ;;
- i[3456]86-*-mingw32*)
- configdirs="$configdirs dosrel" ;;
- *-cygwin*)
- configdirs="$configdirs libtermcap dosrel" ;;
-esac
-
-# Remove more programs from consideration, based on the host or
-# target this usually means that a port of the program doesn't
-# exist yet.
-
-noconfigdirs=""
-
-case "${host}" in
- hppa*64*-*-*)
- noconfigdirs="$noconfigdirs byacc"
+ # Can't build gdb for Cygwin if not native.
+ case "${host}" in
+ *-*-cygwin*) ;; # keep gdb tcl tk expect etc.
+ *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix libgui gnuserv"
+ ;;
+ esac
+ ;;
+ i[[3456]]86-*-pe)
+ noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
;;
- i[3456]86-*-vsta)
- noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv gettext"
+ i[[3456]]86-*-sco3.2v5*)
+ # The linker does not yet know about weak symbols in COFF,
+ # and is not configured to handle mixed ELF and COFF.
+ noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
;;
- i[3456]86-*-go32* | i[3456]86-*-msdosdjgpp*)
- noconfigdirs="tcl tk expect dejagnu send-pr uudecode guile apache inet itcl tix db snavigator gnuserv libffi"
- ;;
- i[3456]86-*-mingw32*)
- # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv"
- noconfigdirs="expect dejagnu cvs autoconf automake send-pr rcs guile perl texinfo apache inet libtool"
- ;;
- i[3456]86-*-beos*)
- noconfigdirs="$noconfigdirs tk itcl tix libgui gdb"
- ;;
- *-*-cygwin*)
- noconfigdirs="autoconf automake send-pr rcs guile perl apache inet"
+ i[[3456]]86-*-sco*)
+ noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
;;
- *-*-netbsd*)
- noconfigdirs="rcs"
+ i[[3456]]86-*-solaris2*)
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
- ppc*-*-pe)
- noconfigdirs="patch diff make tk tcl expect dejagnu cvssrc autoconf automake texinfo bison send-pr gprof rcs guile perl apache inet itcl tix db snavigator gnuserv"
+ i[[3456]]86-*-sysv4*)
+ noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
- powerpc-*-beos*)
- noconfigdirs="$noconfigdirs tk itcl tix libgui gdb dejagnu readline"
+ i[[3456]]86-*-beos*)
+ noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
;;
-esac
-
-# Save it here so that, even in case of --enable-libgcj, if the Java
-# front-end isn't enabled, we still get libgcj disabled.
-libgcj_saved=$libgcj
-case $enable_libgcj in
-yes)
- # If we reset it here, it won't get added to noconfigdirs in the
- # target-specific build rules, so it will be forcibly enabled
- # (unless the Java language itself isn't enabled).
- libgcj=
- ;;
-no)
- # Make sure we get it printed in the list of not supported target libs.
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
-esac
-
-case "${target}" in
- *-*-chorusos)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
+ m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
+ noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
;;
- *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
+ m68k-*-elf*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
- *-*-netbsd*)
- # Skip some stuff on all NetBSD configurations.
- skipdirs="$skipdirs target-newlib target-libiberty target-libgloss"
-
- # Skip some stuff that's unsupported on some NetBSD configurations.
- case "${target}" in
- i*86-*-netbsdelf*) ;;
- *)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
- esac
+ m68k-*-coff*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
- *-*-netware)
- noconfigdirs="$noconfigdirs ${libstdcxx_version} target-newlib target-libiberty target-libgloss ${libgcj}"
+ mcore-*-pe*)
+ # The EPOC C++ environment does not support exceptions or rtti,
+ # and so building libstdc++-v3 tends not to always work.
+ noconfigdirs="$noconfigdirs target-libstdc++-v3"
;;
- *-*-rtems*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- case ${target} in
- h8300*-*-* | h8500-*-*)
- noconfigdirs="$noconfigdirs target-libf2c"
- ;;
- *) ;;
- esac
+ mmix-*-*)
+ noconfigdirs="$noconfigdirs ${libgcj} gdb libgloss"
;;
- *-*-vxworks*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
+ mn10200-*-*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
- alpha*-dec-osf*)
- # ld works, but does not support shared libraries.
- # newlib is not 64 bit ready. I'm not sure about fileutils.
- # gas doesn't generate exception information.
- noconfigdirs="$noconfigdirs gas ld fileutils target-newlib target-libgloss"
+ mn10300-*-*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
- alpha*-*-*vms*)
- noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss ${libgcj}"
+ powerpc-*-aix*)
+ # copied from rs6000-*-* entry
+ noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
;;
- alpha*-*-linux*)
- # newlib is not 64 bit ready
- noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
+ target_configdirs="$target_configdirs target-winsup"
+ noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl tix gnuserv ${libgcj}"
+ # always build newlib.
+ skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
;;
- alpha*-*-freebsd*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ # This is temporary until we can link against shared libraries
+ powerpcle-*-solaris*)
+ noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl tix gnuserv ${libgcj}"
;;
- alpha*-*-*)
- # newlib is not 64 bit ready
- noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
+ powerpc-*-beos*)
+ noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
;;
- sh-*-linux*)
- noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
- ;;
- sh*-*-pe|mips*-*-pe|*arm-wince-pe)
+ powerpc-*-eabi)
noconfigdirs="$noconfigdirs ${libgcj}"
- noconfigdirs="$noconfigdirs target-examples"
- noconfigdirs="$noconfigdirs target-libiberty texinfo send-pr"
- noconfigdirs="$noconfigdirs tcl tix tk itcl libgui sim"
- noconfigdirs="$noconfigdirs expect dejagnu"
- # the C++ libraries don't build on top of CE's C libraries
- noconfigdirs="$noconfigdirs ${libstdcxx_version}"
- skipdirs="$skipdirs target-newlib"
- case "${host}" in
- *-*-cygwin*) ;; # keep gdb and readline
- *) noconfigdirs="$noconfigdirs gdb readline ${libstdcxx_version}"
- ;;
- esac
- ;;
- arc-*-*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
- arm-*-pe*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+ rs6000-*-lynxos*)
+ noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
;;
- arm-*-oabi*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+ rs6000-*-aix*)
+ noconfigdirs="$noconfigdirs gprof ${libgcj}"
;;
- thumb-*-coff)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+ rs6000-*-*)
+ noconfigdirs="$noconfigdirs gprof ${libgcj}"
;;
- thumb-*-elf)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+ m68k-apollo-*)
+ noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss ${libgcj}"
;;
- thumb-*-oabi)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+ mips*-*-irix5*)
+ # The GNU linker does not support shared libraries.
+ noconfigdirs="$noconfigdirs ld gprof target-libgloss ${libgcj}"
;;
- strongarm-*-elf)
- noconfigdirs="$noconfigdirs ${libgcj}"
+ mips*-*-irix6*)
+ # Linking libjava exceeds command-line length limits on at least
+ # IRIX 6.2, but not on IRIX 6.5.
+ # Also, boehm-gc won't build on IRIX 6.5, according to Jeffrey Oldham
+ # <oldham@codesourcery.com>
+ noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
;;
- strongarm-*-coff)
- noconfigdirs="$noconfigdirs ${libgcj}"
+ mips*-dec-bsd*)
+ noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
;;
- xscale-*-elf)
- noconfigdirs="$noconfigdirs target-libffi target-qthreads"
+ mips*-*-bsd*)
+ noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
;;
- xscale-*-coff)
- noconfigdirs="$noconfigdirs ${libgcj}"
+ mipstx39-*-*)
+ noconfigdirs="$noconfigdirs gprof ${libgcj}" # same as generic mips
;;
- thumb-*-pe)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+ mips*-*-linux*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
- arm-*-riscix*)
- noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
+ mips*-*-*)
+ noconfigdirs="$noconfigdirs gprof ${libgcj}"
;;
- avr-*-*)
- noconfigdirs="$noconfigdirs target-libiberty ${libstdcxx_version} ${libgcj}"
+ romp-*-*)
+ noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
;;
- c4x-*-*)
- noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss ${libgcj}"
+ sh-*-*)
+ case "${host}" in
+ i[[3456]]86-*-vsta) ;; # don't add gprof back in
+ i[[3456]]86-*-go32*) ;; # don't add gprof back in
+ i[[3456]]86-*-msdosdjgpp*) ;; # don't add gprof back in
+ *) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
+ esac
+ noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
- c54x*-*-* | tic54x-*-*)
- noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss ${libgcj} gcc gdb newlib"
+ sh64-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
- cris-*-*)
+ sparc-*-elf*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
- d10v-*-*)
- noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss ${libgcj}"
- ;;
- d30v-*-*)
+ sparc64-*-elf*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
- fr30-*-elf*)
+ sparclite-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
- fi
;;
- frv-*-*)
+ sparc-*-sunos4*)
noconfigdirs="$noconfigdirs ${libgcj}"
if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-bsp target-cygmon"
+ noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
+ else
+ use_gnu_ld=no
fi
;;
- h8300*-*-*)
- noconfigdirs="$noconfigdirs target-libgloss"
+ sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
;;
- h8500-*-*)
- noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss ${libgcj} target-libf2c"
+ v810-*-*)
+ noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libstdc++-v3 opcodes target-libgloss ${libgcj}"
;;
- hppa*64*-*-linux* | parisc*64*-*-linux*)
- # In this case, it's because the hppa64-linux target is for
- # the kernel only at this point and has no libc, and thus no
- # headers, crt*.o, etc., all of which are needed by these.
- noconfigdirs="$noconfigdirs target-zlib"
+ v850-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
- hppa*-*-*elf* | \
- parisc*-*-linux* | hppa*-*-linux* | \
- hppa*-*-lites* | \
- hppa*64*-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- # Do configure ld/binutils/gas for this case.
+ v850e-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
- hppa*-*-*)
- # According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
- # build on HP-UX 10.20.
- noconfigdirs="$noconfigdirs ld shellutils ${libgcj}"
+ v850ea-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
- ia64*-*-elf*)
- # No gdb support yet.
- noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb"
+ vax-*-vms)
+ noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss ${libgcj}"
;;
- ia64*-**-hpux*)
- # No gdb or ld support yet.
- noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb ld"
+ vax-*-*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
- i[3456]86-*-coff | i[3456]86-*-elf)
- noconfigdirs="$noconfigdirs ${libgcj}"
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-libstub target-cygmon"
- fi
+ ip2k-*-*)
+ noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
;;
- i[34567]86-*-freebsd*)
+ *-*-linux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
- s390*-*-linux*)
- # The libffi port is not yet in the GCC tree
+ *-*-lynxos*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
+ ;;
+ *-*-*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
- i[3456]86-*-linux*)
- # This section makes it possible to build newlib natively on linux.
- # If we are using a cross compiler then don't configure newlib.
- if test x${is_cross_compiler} != xno ; then
- noconfigdirs="$noconfigdirs target-newlib"
+esac
+
+# If we aren't building newlib, then don't build libgloss, since libgloss
+# depends upon some newlib header files.
+case "${noconfigdirs}" in
+ *target-libgloss*) ;;
+ *target-newlib*) noconfigdirs="$noconfigdirs target-libgloss" ;;
+esac
+
+# Figure out what language subdirectories are present.
+# Look if the user specified --enable-languages="..."; if not, use
+# the environment variable $LANGUAGES if defined. $LANGUAGES might
+# go away some day.
+# NB: embedded tabs in this IF block -- do not untabify
+if test x"${enable_languages+set}" != xset; then
+ if test x"${LANGUAGES+set}" = xset; then
+ enable_languages="${LANGUAGES}"
+ echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2
+ else
+ enable_languages=all
+ fi
+else
+ if test x"${enable_languages}" = x ||
+ test x"${enable_languages}" = xyes;
+ then
+ echo configure.in: --enable-languages needs at least one language argument 1>&2
+ exit 1
+ fi
+fi
+enable_languages=`echo "${enable_languages}" | sed -e 's/[[ ,]][[ ,]]*/,/g' -e 's/,$//'`
+
+# First scan to see if an enabled language requires some other language.
+# We assume that a given config-lang.in will list all the language
+# front ends it requires, even if some are required indirectly.
+for lang in ${srcdir}/gcc/*/config-lang.in ..
+do
+ case $lang in
+ ..) ;;
+ # The odd quoting in the next line works around
+ # an apparent bug in bash 1.12 on linux.
+ ${srcdir}/gcc/[[*]]/config-lang.in) ;;
+ *)
+ lang_alias=`sed -n -e 's,^language=[['"'"'"'"]]\(.*\)[["'"'"'"']].*$,\1,p' -e 's,^language=\([[^ ]]*\).*$,\1,p' $lang`
+ this_lang_requires=`sed -n -e 's,^lang_requires=[['"'"'"'"]]\(.*\)[["'"'"'"']].*$,\1,p' -e 's,^lang_requires=\([[^ ]]*\).*$,\1,p' $lang`
+ for other in $this_lang_requires
+ do
+ case ,${enable_languages}, in
+ *,$other,*) ;;
+ *,all,*) ;;
+ *,$lang_alias,*)
+ echo " \`$other' language required by \`$lang_alias'; enabling" 1>&2
+ enable_languages="$enable_languages,$other"
+ ;;
+ esac
+ done
+ ;;
+ esac
+done
+
+subdirs=
+for lang in ${srcdir}/gcc/*/config-lang.in ..
+do
+ case $lang in
+ ..) ;;
+ # The odd quoting in the next line works around
+ # an apparent bug in bash 1.12 on linux.
+ ${srcdir}/gcc/[[*]]/config-lang.in) ;;
+ *)
+ lang_alias=`sed -n -e 's,^language=[['"'"'"'"]]\(.*\)[["'"'"'"']].*$,\1,p' -e 's,^language=\([[^ ]]*\).*$,\1,p' $lang`
+ this_lang_libs=`sed -n -e 's,^target_libs=[['"'"'"'"]]\(.*\)[["'"'"'"']].*$,\1,p' -e 's,^target_libs=\([[^ ]]*\).*$,\1,p' $lang`
+ this_lang_dirs=`sed -n -e 's,^lang_dirs=[['"'"'"'"]]\(.*\)[["'"'"'"']].*$,\1,p' -e 's,^lang_dirs=\([[^ ]]*\).*$,\1,p' $lang`
+ build_by_default=`sed -n -e 's,^build_by_default=[['"'"'"'"]]\(.*\)[["'"'"'"']].*$,\1,p' -e 's,^build_by_default=\([[^ ]]*\).*$,\1,p' $lang`
+ if test "x$lang_alias" = x
+ then
+ echo "$lang doesn't set \$language." 1>&2
+ exit 1
+ fi
+ case ${build_by_default},${enable_languages}, in
+ *,$lang_alias,*) add_this_lang=yes ;;
+ no,*) add_this_lang=no ;;
+ *,all,*) add_this_lang=yes ;;
+ *) add_this_lang=no ;;
+ esac
+ if test x"${add_this_lang}" = xyes; then
+ eval target_libs='"$target_libs "'\"$this_lang_libs\"
+ else
+ eval noconfigdirs='"$noconfigdirs "'\"$this_lang_libs $this_lang_dirs\"
+ fi
+ ;;
+ esac
+done
+
+# Remove the entries in $skipdirs and $noconfigdirs from $configdirs and
+# $target_configdirs.
+# If we have the source for $noconfigdirs entries, add them to $notsupp.
+
+notsupp=""
+for dir in . $skipdirs $noconfigdirs ; do
+ dirname=`echo $dir | sed -e s/target-//g`
+ if test $dir != . && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
+ if test -r $srcdir/$dirname/configure ; then
+ if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ true
+ else
+ notsupp="$notsupp $dir"
+ fi
fi
- noconfigdirs="$noconfigdirs target-libgloss"
- # If we are not using a cross compiler, do configure newlib.
- # Note however, that newlib will only be configured in this situation
- # if the --with-newlib option has been given, because otherwise
- # 'target-newlib' will appear in skipdirs.
- ;;
- *-*-linux*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss"
- ;;
- i[3456]86-*-mingw32*)
- target_configdirs="$target_configdirs target-mingw"
- noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj}"
+ fi
+ if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
+ if test -r $srcdir/$dirname/configure ; then
+ if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ true
+ else
+ notsupp="$notsupp $dir"
+ fi
+ fi
+ fi
+done
- # Can't build gdb for mingw32 if not native.
- case "${host}" in
- i[3456]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
- *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix db snavigator gnuserv"
- ;;
+# Sometimes the tools are distributed with libiberty but with no other
+# libraries. In that case, we don't want to build target-libiberty.
+if test -n "${target_configdirs}" ; then
+ others=
+ for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
+ if test "$i" != "libiberty" ; then
+ if test -r $srcdir/$i/configure ; then
+ others=yes;
+ break;
+ fi
+ fi
+ done
+ if test -z "${others}" ; then
+ target_configdirs=
+ fi
+fi
+
+# Quietly strip out all directories which aren't configurable in this tree.
+# This relies on all configurable subdirectories being autoconfiscated, which
+# is now the case.
+configdirs_all="$configdirs"
+configdirs=
+for i in ${configdirs_all} ; do
+ if test -f ${srcdir}/$i/configure ; then
+ configdirs="${configdirs} $i"
+ fi
+done
+target_configdirs_all="$target_configdirs"
+target_configdirs=
+for i in ${target_configdirs_all} ; do
+ j=`echo $i | sed -e s/target-//g`
+ if test -f ${srcdir}/$j/configure ; then
+ target_configdirs="${target_configdirs} $i"
+ fi
+done
+
+# Produce a warning message for the subdirs we can't configure.
+# This isn't especially interesting in the Cygnus tree, but in the individual
+# FSF releases, it's important to let people know when their machine isn't
+# supported by the one or two programs in a package.
+
+if test -n "${notsupp}" && test -z "${norecursion}" ; then
+ # If $appdirs is non-empty, at least one of those directories must still
+ # be configured, or we error out. (E.g., if the gas release supports a
+ # specified target in some subdirs but not the gas subdir, we shouldn't
+ # pretend that all is well.)
+ if test -n "$appdirs" ; then
+ for dir in $appdirs ; do
+ if test -r $dir/Makefile.in ; then
+ if echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ appdirs=""
+ break
+ fi
+ if echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ appdirs=""
+ break
+ fi
+ fi
+ done
+ if test -n "$appdirs" ; then
+ echo "*** This configuration is not supported by this package." 1>&2
+ exit 1
+ fi
+ fi
+ # Okay, some application will build, or we don't care to check. Still
+ # notify of subdirs not getting built.
+ echo "*** This configuration is not supported in the following subdirectories:" 1>&2
+ echo " ${notsupp}" 1>&2
+ echo " (Any other directories should still work fine.)" 1>&2
+fi
+
+case "$host" in
+ *msdosdjgpp*)
+ enable_gdbtk=no ;;
+esac
+
+copy_dirs=
+
+# Handle --with-headers=XXX. If the value is not "yes", the contents of
+# the named directory are copied to $(tooldir)/sys-include.
+if test x"${with_headers}" != x ; then
+ if test x${is_cross_compiler} = xno ; then
+ echo 1>&2 '***' --with-headers is only supported when cross compiling
+ exit 1
+ fi
+ if test x"${with_headers}" != xyes ; then
+ case "${exec_prefixoption}" in
+ "") x=${prefix} ;;
+ *) x=${exec_prefix} ;;
esac
- ;;
- *-*-cygwin*)
- target_configdirs="$target_configdirs target-libtermcap target-winsup"
- noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}"
- # always build newlib.
- skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
+ copy_dirs="${copy_dirs} ${with_headers} $x/${target_alias}/sys-include"
+ fi
+fi
- # Can't build gdb for Cygwin if not native.
- case "${host}" in
- *-*-cygwin*) ;; # keep gdb tcl tk expect etc.
- *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix libgui db snavigator gnuserv"
- ;;
+# Handle --with-libs=XXX. If the value is not "yes", the contents of
+# the name directories are copied to $(tooldir)/lib. Multiple directories
+# are permitted.
+if test x"${with_libs}" != x ; then
+ if test x${is_cross_compiler} = xno ; then
+ echo 1>&2 '***' --with-libs is only supported when cross compiling
+ exit 1
+ fi
+ if test x"${with_libs}" != xyes ; then
+ # Copy the libraries in reverse order, so that files in the first named
+ # library override files in subsequent libraries.
+ case "${exec_prefixoption}" in
+ "") x=${prefix} ;;
+ *) x=${exec_prefix} ;;
esac
- ;;
- i[3456]86-*-pe)
- noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss ${libgcj}"
+ for l in ${with_libs}; do
+ copy_dirs="$l $x/${target_alias}/lib ${copy_dirs}"
+ done
+ fi
+fi
+
+# Handle ${copy_dirs}
+set fnord ${copy_dirs}
+shift
+while test $# != 0 ; do
+ if test -f $2/COPIED && test x"`cat $2/COPIED`" = x"$1" ; then
+ :
+ else
+ echo Copying $1 to $2
+
+ # Use the install script to create the directory and all required
+ # parent directories.
+ if test -d $2 ; then
+ :
+ else
+ echo >config.temp
+ ${srcdir}/install-sh -c -m 644 config.temp $2/COPIED
+ fi
+
+ # Copy the directory, assuming we have tar.
+ # FIXME: Should we use B in the second tar? Not all systems support it.
+ (cd $1; tar -cf - .) | (cd $2; tar -xpf -)
+
+ # It is the responsibility of the user to correctly adjust all
+ # symlinks. If somebody can figure out how to handle them correctly
+ # here, feel free to add the code.
+
+ echo $1 > $2/COPIED
+ fi
+ shift; shift
+done
+
+# Work in distributions that contain no compiler tools, like Autoconf.
+tentative_cc=""
+host_makefile_frag=/dev/null
+if test -d ${srcdir}/config ; then
+case "${host}" in
+ m68k-hp-hpux*)
+ # Avoid "too much defining" errors from HPUX compiler.
+ tentative_cc="cc -Wp,-H256000"
+ # If "ar" in $PATH is GNU ar, the symbol table may need rebuilding.
+ # If it's HP/UX ar, this should be harmless.
+ RANLIB="ar ts"
;;
- i[3456]86-*-sco3.2v5*)
- # The linker does not yet know about weak symbols in COFF,
- # and is not configured to handle mixed ELF and COFF.
- noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
+ m68k-apollo-sysv*)
+ tentative_cc="cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DUSG"
;;
- i[3456]86-*-sco*)
- noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+ m68k-apollo-bsd*)
+ #None of the Apollo compilers can compile gas or binutils. The preprocessor
+ # chokes on bfd, the compiler won't let you assign integers to enums, and
+ # other problems. Defining CC to gcc is a questionable way to say "don't use
+ # the apollo compiler" (the preferred version of GCC could be called cc,
+ # or whatever), but I'm not sure leaving CC as cc is any better...
+ #CC=cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DNO_STDARG
+ # Used to have BISON=yacc.
+ tentative_cc=gcc
;;
- i[3456]86-*-solaris2*)
- noconfigdirs="$noconfigdirs target-libgloss"
+ m88k-dg-dgux*)
+ tentative_cc="gcc -Wall -ansi -D__using_DGUX"
;;
- i[3456]86-*-sysv4*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+ m88k-harris-cxux*)
+ # Under CX/UX, we want to tell the compiler to use ANSI mode.
+ tentative_cc="cc -Xa"
+ host_makefile_frag="config/mh-cxux"
;;
- i[3456]86-*-beos*)
- noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
- ;;
- m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
- noconfigdirs="$noconfigdirs target-libiberty ${libstdcxx_version} ${libgcj}"
+ m88k-motorola-sysv*)
;;
- m68k-*-elf*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-bsp target-cygmon"
- fi
+ mips*-dec-ultrix*)
+ tentative_cc="cc -Wf,-XNg1000"
+ host_makefile_frag="config/mh-decstation"
;;
- m68k-*-coff*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-bsp target-cygmon"
- fi
+ mips*-nec-sysv4*)
+ # The C compiler on NEC MIPS SVR4 needs bigger tables.
+ tentative_cc="cc -ZXNd=5000 -ZXNg=1000"
+ host_makefile_frag="config/mh-necv4"
+ ;;
+ mips*-sgi-irix4*)
+ # Tell compiler to use K&R C. We can't compile under the SGI Ansi
+ # environment. Also bump switch table size so that cp-parse will
+ # compile. Bump string length limit so linker builds.
+ tentative_cc="cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000 -Wf,-XNl8192"
+ ;;
+ mips*-*-sysv4*)
+ host_makefile_frag="config/mh-sysv4"
;;
- mcore-*-pe*)
- # The EPOC C++ environment does not support exceptions or rtti,
- # and so building libstdc++-v3 tends not to always work.
- noconfigdirs="$noconfigdirs target-libstdc++-v3"
+ mips*-*-sysv*)
+ # This is for a MIPS running RISC/os 4.52C.
+
+ # This is needed for GDB, but needs to be in the top-level make because
+ # if a library is compiled with the bsd headers and gets linked with the
+ # sysv system libraries all hell can break loose (e.g. a jmp_buf might be
+ # a different size).
+ # ptrace(2) apparently has problems in the BSD environment. No workaround is
+ # known except to select the sysv environment. Could we use /proc instead?
+ # These "sysv environments" and "bsd environments" often end up being a pain.
+ #
+ # This is not part of CFLAGS because perhaps not all C compilers have this
+ # option.
+ tentative_cc="cc -systype sysv"
;;
- mmix-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
+ i370-ibm-opened*)
+ tentative_cc="c89"
;;
- mn10200-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-libstub target-cygmon"
- fi
+ i[[3456]]86-*-sysv5*)
+ host_makefile_frag="config/mh-sysv5"
;;
- mn10300-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
- fi
+ i[[3456]]86-*-dgux*)
+ tentative_cc="gcc -Wall -ansi -D__using_DGUX"
+ host_makefile_frag="config/mh-dgux386"
;;
- powerpc-*-aix*)
- # copied from rs6000-*-* entry
- noconfigdirs="$noconfigdirs gprof cvssrc target-libgloss ${libgcj}"
+ i[[3456]]86-ncr-sysv4.3*)
+ # The MetaWare compiler will generate a copyright message unless you
+ # turn it off by adding the -Hnocopyr flag.
+ tentative_cc="cc -Hnocopyr"
;;
- powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
- target_configdirs="$target_configdirs target-winsup"
- noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl tix db snavigator gnuserv ${libgcj}"
- # always build newlib.
- skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
+ i[[3456]]86-ncr-sysv4*)
+ # for an NCR 3000 (i486/SVR4) system.
+ # The NCR 3000 ships with a MetaWare compiler installed as /bin/cc.
+ # This compiler not only emits obnoxious copyright messages every time
+ # you run it, but it chokes and dies on a whole bunch of GNU source
+ # files. Default to using the AT&T compiler installed in /usr/ccs/ATT/cc.
+ tentative_cc="/usr/ccs/ATT/cc"
+ host_makefile_frag="config/mh-ncr3000"
;;
- # This is temporary until we can link against shared libraries
- powerpcle-*-solaris*)
- noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl tix db snavigator gnuserv ${libgcj}"
+ i[[3456]]86-*-sco3.2v5*)
;;
- powerpc-*-beos*)
- noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
+ i[[3456]]86-*-sco*)
+ # The native C compiler botches some simple uses of const. Unfortunately,
+ # it doesn't defined anything like "__sco__" for us to test for in ansidecl.h.
+ tentative_cc="cc -Dconst="
+ host_makefile_frag="config/mh-sco"
;;
- powerpc-*-eabi)
- noconfigdirs="$noconfigdirs ${libgcj}"
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
- fi
+ i[[3456]]86-*-udk*)
+ host_makefile_frag="config/mh-sysv5"
;;
- rs6000-*-lynxos*)
- # The CVS server code doesn't work on the RS/6000
- noconfigdirs="$noconfigdirs target-newlib gprof cvssrc ${libgcj}"
+ i[[3456]]86-*-solaris2*)
+ host_makefile_frag="config/mh-sysv4"
;;
- rs6000-*-aix*)
- noconfigdirs="$noconfigdirs gprof ${libgcj}"
+ i[[3456]]86-*-msdosdjgpp*)
+ host_makefile_frag="config/mh-djgpp"
;;
- rs6000-*-*)
- noconfigdirs="$noconfigdirs gprof ${libgcj}"
+ *-cygwin*)
+ host_makefile_frag="config/mh-cygwin"
;;
- m68k-apollo-*)
- noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss ${libgcj}"
+ *-mingw32*)
+ host_makefile_frag="config/mh-mingw32"
;;
- mips*-*-irix5*)
- # The GNU linker does not support shared libraries.
- noconfigdirs="$noconfigdirs ld gprof target-libgloss ${libgcj}"
+ *-interix*)
+ host_makefile_frag="config/mh-interix"
;;
- mips*-*-irix6*)
- # The GNU assembler does not support IRIX 6.
- # Linking libjava exceeds command-line length limits on at least
- # IRIX 6.2, but not on IRIX 6.5.
- # Also, boehm-gc won't build on IRIX 6.5, according to Jeffrey Oldham
- # <oldham@codesourcery.com>
- noconfigdirs="$noconfigdirs gas gprof target-libgloss ${libgcj}"
+ vax-*-ultrix2*)
+ # The old BSD pcc isn't up to compiling parts of gdb so use gcc
+ tentative_cc=gcc
;;
- mips*-dec-bsd*)
- noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+ *-*-solaris2*)
+ host_makefile_frag="config/mh-solaris"
;;
- mips*-*-bsd*)
- noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+ m68k-sun-sunos*)
+ # Sun's C compiler needs the -J flag to be able to compile cp-parse.c
+ # without overflowing the jump tables (-J says to use a 32 bit table)
+ tentative_cc="cc -J"
;;
- mipstx39-*-*)
- noconfigdirs="$noconfigdirs gprof ${libgcj}" # same as generic mips
- target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
- ;;
- mips*-*-linux*)
- noconfigdirs="$noconfigdirs target-libffi"
+ *-hp-hpux*)
+ tentative_cc="cc -Wp,-H256000"
;;
- mips*-*-*)
- noconfigdirs="$noconfigdirs gprof ${libgcj}"
+ *-*-hiux*)
+ tentative_cc="cc -Wp,-H256000"
;;
- romp-*-*)
- noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
+ rs6000-*-lynxos*)
+ # /bin/cc is less than useful for our purposes. Always use GCC
+ tentative_cc="/usr/cygnus/progressive/bin/gcc"
+ host_makefile_frag="config/mh-lynxrs6k"
;;
- sh-*-*)
- case "${host}" in
- i[3456]86-*-vsta) ;; # don't add gprof back in
- i[3456]86-*-go32*) ;; # don't add gprof back in
- i[3456]86-*-msdosdjgpp*) ;; # don't add gprof back in
- *) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
- esac
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+ *-*-lynxos*)
+ # /bin/cc is less than useful for our purposes. Always use GCC
+ tentative_cc="/bin/gcc"
;;
- sh64-*-*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+ *-*-sysv4*)
+ host_makefile_frag="config/mh-sysv4"
;;
- sparc-*-elf*)
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-libstub target-cygmon"
- fi
- noconfigdirs="$noconfigdirs ${libgcj}"
+esac
+fi
+
+extra_arflags_for_target=
+extra_nmflags_for_target=
+extra_ranlibflags_for_target=
+target_makefile_frag=/dev/null
+case "${target}" in
+ i[[3456]]86-*-netware*)
+ target_makefile_frag="config/mt-netware"
;;
- sparc64-*-elf*)
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-libstub target-cygmon"
- fi
- noconfigdirs="$noconfigdirs ${libgcj}"
+ powerpc-*-netware*)
+ target_makefile_frag="config/mt-netware"
;;
- sparclite-*-*)
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
- fi
- noconfigdirs="$noconfigdirs ${libgcj}"
+ *-*-linux*)
+ target_makefile_frag="config/mt-linux"
;;
- sparc-*-sunos4*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- if test x${is_cross_compiler} != xno ; then
- noconfigdirs="$noconfigdirs gdb gdbtest target-newlib target-libgloss"
- else
- use_gnu_ld=no
- fi
+ *-*-aix4.[[3456789]]* | *-*-aix[[56789]].*)
+ # nm and ar from AIX 4.3 and above require -X32_64 flag to all ar and nm
+ # commands to handle both 32-bit and 64-bit objects. These flags are
+ # harmless if we're using GNU nm or ar.
+ extra_arflags_for_target=" -X32_64"
+ extra_nmflags_for_target=" -B -X32_64"
;;
- sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
+ *-*-darwin*)
+ # ranlib from Darwin requires the -c flag to look at common symbols.
+ extra_ranlibflags_for_target=" -c"
;;
- v810-*-*)
- noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld ${libstdcxx_version} opcodes target-libgloss ${libgcj}"
+ mips*-*-pe | sh*-*-pe | *arm-wince-pe)
+ target_makefile_frag="config/mt-wince"
;;
- v850-*-*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+esac
+
+alphaieee_frag=/dev/null
+case $target in
+ alpha*-*-*)
+ # This just makes sure to use the -mieee option to build target libs.
+ # This should probably be set individually by each library.
+ alphaieee_frag="config/mt-alphaieee"
;;
- v850e-*-*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+esac
+
+# If --enable-target-optspace always use -Os instead of -O2 to build
+# the target libraries, similarly if it is not specified, use -Os
+# on selected platforms.
+ospace_frag=/dev/null
+case "${enable_target_optspace}:${target}" in
+ yes:*)
+ ospace_frag="config/mt-ospace"
;;
- v850ea-*-*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+ :d30v-*)
+ ospace_frag="config/mt-d30v"
;;
- vax-*-vms)
- noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss ${libgcj}"
+ :m32r-* | :d10v-* | :fr30-*)
+ ospace_frag="config/mt-ospace"
;;
- vax-*-*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
+ no:* | :*)
;;
- *-*-lynxos*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
- ;;
- *-*-macos* | \
- *-*-mpw*)
- # Macs want a resource compiler.
- configdirs="$configdirs grez"
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
- *-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
+ *)
+ echo "*** bad value \"${enable_target_optspace}\" for --enable-target-optspace flag; ignored" 1>&2
;;
esac
-# If we aren't building newlib, then don't build libgloss, since libgloss
-# depends upon some newlib header files.
-case "${noconfigdirs}" in
- *target-libgloss*) ;;
- *target-newlib*) noconfigdirs="$noconfigdirs target-libgloss" ;;
-esac
+# Set with_gnu_as and with_gnu_ld as appropriate.
+#
+# This is done by determining whether or not the appropriate directory
+# is available, and by checking whether or not specific configurations
+# have requested that this magic not happen.
+#
+# The command line options always override the explicit settings in
+# configure.in, and the settings in configure.in override this magic.
+#
+# If the default for a toolchain is to use GNU as and ld, and you don't
+# want to do that, then you should use the --without-gnu-as and
+# --without-gnu-ld options for the configure script.
-# Make sure we don't let GNU ld be added if we didn't want it.
-if test x$with_gnu_ld = xno ; then
- use_gnu_ld=no
- noconfigdirs="$noconfigdirs ld"
+if test x${use_gnu_as} = x &&
+ echo " ${configdirs} " | grep " gas " > /dev/null 2>&1 ; then
+ with_gnu_as=yes
+ extra_host_args="$extra_host_args --with-gnu-as"
fi
-# Make sure we don't let GNU as be added if we didn't want it.
-if test x$with_gnu_as = xno ; then
- use_gnu_as=no
- noconfigdirs="$noconfigdirs gas"
+if test x${use_gnu_ld} = x &&
+ echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 ; then
+ with_gnu_ld=yes
+ extra_host_args="$extra_host_args --with-gnu-ld"
fi
-# Figure out what language subdirectories are present.
-# Look if the user specified --enable-languages="..."; if not, use
-# the environment variable $LANGUAGES if defined. $LANGUAGES might
-# go away some day.
-# NB: embedded tabs in this IF block -- do not untabify
-if test x"${enable_languages+set}" != xset; then
- if test x"${LANGUAGES+set}" = xset; then
- enable_languages="${LANGUAGES}"
- echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2
- else
- enable_languages=all
- fi
-else
- if test x"${enable_languages}" = x ||
- test x"${enable_languages}" = xyes;
- then
- echo configure.in: --enable-languages needs at least one language argument 1>&2
- exit 1
- fi
+# If using newlib, add --with-newlib to the extra_host_args so that gcc/configure
+# can detect this case.
+
+if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 ; then
+ with_newlib=yes
+ extra_host_args="$extra_host_args --with-newlib"
+fi
+
+
+# Default to using --with-stabs for certain targets.
+if test x${with_stabs} = x ; then
+ case "${target}" in
+ mips*-*-irix6*o32)
+ with_stabs=yes;
+ extra_host_args="${extra_host_args} --with-stabs"
+ ;;
+ mips*-*-irix6*)
+ ;;
+ mips*-*-* | alpha*-*-osf*)
+ with_stabs=yes;
+ extra_host_args="${extra_host_args} --with-stabs"
+ ;;
+ esac
+fi
+
+# hpux11 in 64bit mode has libraries in a weird place. Arrange to find
+# them automatically.
+case "${host}" in
+ hppa*64*-*-hpux11*)
+ extra_host_args="$extra_host_args -x-libraries=/usr/lib/pa20_64 -x-includes=/usr/X11R6/include"
+ ;;
+esac
+
+# If we aren't going to be using gcc, see if we can extract a definition
+# of CC from the fragment.
+# Actually, use the 'pre-extracted' version above.
+if test -z "${CC}" && test "${build}" = "${host}" ; then
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
+ found=
+ for dir in $PATH; do
+ test -z "$dir" && dir=.
+ if test -f $dir/gcc; then
+ found=yes
+ break
+ fi
+ done
+ IFS="$save_ifs"
+ if test -z "${found}" && test -n "${tentative_cc}" ; then
+ CC=$tentative_cc
+ fi
fi
-enable_languages=`echo "${enable_languages}" | sed -e 's/[ ,][ ,]*/,/g' -e 's/,$//'`
-# First scan to see if an enabled language requires some other language.
-# We assume that a given config-lang.in will list all the language
-# front ends it requires, even if some are required indirectly.
-for lang in ${srcdir}/gcc/*/config-lang.in ..
+# Some systems (e.g., one of the i386-aix systems the gas testers are
+# using) don't handle "\$" correctly, so don't use it here.
+tooldir='$(exec_prefix)'/${target_alias}
+build_tooldir=${tooldir}
+
+# Generate a default definition for YACC. This is used if the makefile can't
+# locate bison or byacc in objdir.
+
+for prog in 'bison -y' byacc yacc
do
- case $lang in
- ..)
- ;;
- # The odd quoting in the next line works around
- # an apparent bug in bash 1.12 on linux.
- ${srcdir}/gcc/[*]/config-lang.in)
- ;;
- *)
- lang_alias=`sed -n -e 's,^language=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^language=\([^ ]*\).*$,\1,p' $lang`
- this_lang_requires=`sed -n -e 's,^lang_requires=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^lang_requires=\([^ ]*\).*$,\1,p' $lang`
- for other in $this_lang_requires
- do
- case ,${enable_languages}, in
- *,$other,*)
- ;;
- *,all,*)
- ;;
- *,$lang_alias,*)
- echo " \`$other' language required by \`$lang_alias'; enabling" 1>&2
- enable_languages="$enable_languages,$other"
- ;;
- esac
- done
- ;;
- esac
+ set dummy $prog; tmp=$2
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
+ for dir in $PATH; do
+ test -z "$dir" && dir=.
+ if test -f $dir/$tmp; then
+ DEFAULT_YACC="$prog"
+ break
+ fi
+ done
+ IFS="$save_ifs"
+
+ test -n "$DEFAULT_YACC" && break
done
-subdirs=
-for lang in ${srcdir}/gcc/*/config-lang.in ..
+# Generate a default definition for M4. This is used if the makefile can't
+# locate m4 in objdir.
+
+for prog in gm4 gnum4 m4
do
- case $lang in
- ..) ;;
- # The odd quoting in the next line works around
- # an apparent bug in bash 1.12 on linux.
- ${srcdir}/gcc/[*]/config-lang.in) ;;
- *)
- lang_alias=`sed -n -e 's,^language=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^language=\([^ ]*\).*$,\1,p' $lang`
- this_lang_libs=`sed -n -e 's,^target_libs=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^target_libs=\([^ ]*\).*$,\1,p' $lang`
- this_lang_dirs=`sed -n -e 's,^lang_dirs=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^lang_dirs=\([^ ]*\).*$,\1,p' $lang`
- build_by_default=`sed -n -e 's,^build_by_default=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^build_by_default=\([^ ]*\).*$,\1,p' $lang`
- if test "x$lang_alias" = x
- then
- echo "$lang doesn't set \$language." 1>&2
- exit 1
- fi
- case ${build_by_default},${enable_languages}, in
- *,$lang_alias,*) add_this_lang=yes ;;
- no,*) add_this_lang=no ;;
- *,all,*) add_this_lang=yes ;;
- *) add_this_lang=no ;;
- esac
- if test x"${add_this_lang}" = xyes; then
- eval target_libs='"$target_libs "'\"$this_lang_libs\"
- else
- eval noconfigdirs='"$noconfigdirs "'\"$this_lang_libs $this_lang_dirs\"
- fi
- ;;
- esac
+ set dummy $prog; tmp=$2
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
+ for dir in $PATH; do
+ test -z "$dir" && dir=.
+ if test -f $dir/$tmp; then
+ DEFAULT_M4="$prog"
+ break
+ fi
+ done
+ IFS="$save_ifs"
+
+ test -n "$DEFAULT_M4" && break
done
-# Remove the entries in $skipdirs and $noconfigdirs from $configdirs and
-# $target_configdirs.
-# If we have the source for $noconfigdirs entries, add them to $notsupp.
+# Generate a default definition for LEX. This is used if the makefile can't
+# locate flex in objdir.
-notsupp=""
-for dir in . $skipdirs $noconfigdirs ; do
- dirname=`echo $dir | sed -e s/target-//g`
- if test $dir != . && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
- configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
- if test -r $srcdir/$dirname/configure \
- || test -r $srcdir/$dirname/configure.in ; then
- if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
- true
- else
- notsupp="$notsupp $dir"
- fi
- fi
- fi
- if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
- target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
- if test -r $srcdir/$dirname/configure \
- || test -r $srcdir/$dirname/configure.in ; then
- if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
- true
- else
- notsupp="$notsupp $dir"
- fi
+for prog in flex lex
+do
+ set dummy $prog; tmp=$2
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
+ for dir in $PATH; do
+ test -z "$dir" && dir=.
+ if test -f $dir/$tmp; then
+ DEFAULT_LEX="$prog"
+ break
fi
- fi
+ done
+ IFS="$save_ifs"
+
+ test -n "$DEFAULT_LEX" && break
done
-# Sometimes the tools are distributed with libiberty but with no other
-# libraries. In that case, we don't want to build target-libiberty.
-if test -n "${target_configdirs}" ; then
- others=
- for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
- if test "$i" != "libiberty" ; then
- if test -r $srcdir/$i/configure || test -r $srcdir/$i/configure.in ; then
- others=yes;
- break;
+if test "${build}" != "${host}" ; then
+ # If we are doing a Canadian Cross, in which the host and build systems
+ # are not the same, we set reasonable default values for the tools.
+
+ BISON=${BISON-bison}
+ CC=${CC-${host_alias}-gcc}
+ CFLAGS=${CFLAGS-"-g -O2"}
+ CXX=${CXX-${host_alias}-c++}
+ CXXFLAGS=${CXXFLAGS-"-g -O2"}
+ CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
+ CC_FOR_TARGET=${CC_FOR_TARGET-${target_alias}-gcc}
+ CXX_FOR_TARGET=${CXX_FOR_TARGET-${target_alias}-c++}
+ GCJ_FOR_TARGET=${GCJ_FOR_TARGET-${target_alias}-gcj}
+ GCC_FOR_TARGET=${GCC_FOR_TARGET-${CC_FOR_TARGET-${target_alias}-gcc}}
+ BUILD_PREFIX=${build_alias}-
+ BUILD_PREFIX_1=${build_alias}-
+ MAKEINFO=${MAKEINFO-makeinfo}
+
+ if test -z "${YACC}" ; then
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
+ for dir in $PATH; do
+ test -z "$dir" && dir=.
+ if test -f $dir/bison; then
+ YACC="bison -y"
+ break
+ fi
+ if test -f $dir/byacc; then
+ YACC=byacc
+ break
fi
+ if test -f $dir/yacc; then
+ YACC=yacc
+ break
+ fi
+ done
+ IFS="$save_ifs"
+ if test -z "${YACC}" ; then
+ YACC="bison -y"
fi
- done
- if test -z "${others}" ; then
- target_configdirs=
fi
-fi
-
-# Deconfigure all subdirectories, in case we are changing the
-# configuration from one where a subdirectory is supported to one where it
-# is not.
-if test -z "${norecursion}" && test -n "${configdirs}" ; then
- for i in `echo ${configdirs} | sed -e s/target-//g` ; do
- rm -f $i/Makefile
- done
-fi
-if test -z "${norecursion}" && test -n "${target_configdirs}" ; then
- for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
- rm -f ${target_subdir}/$i/Makefile
- done
-fi
-# Quietly strip out all directories which aren't configurable in this tree.
-# This relies on all configurable subdirectories being autoconfiscated, which
-# is now the case.
-configdirs_all="$configdirs"
-configdirs=
-for i in ${configdirs_all} ; do
- if test -f ${srcdir}/$i/configure ; then
- configdirs="${configdirs} $i"
- fi
-done
-target_configdirs_all="$target_configdirs"
-target_configdirs=
-for i in ${target_configdirs_all} ; do
- j=`echo $i | sed -e s/target-//g`
- if test -f ${srcdir}/$j/configure ; then
- target_configdirs="${target_configdirs} $i"
+ if test -z "${LEX}" ; then
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
+ for dir in $PATH; do
+ test -z "$dir" && dir=.
+ if test -f $dir/flex; then
+ LEX=flex
+ break
+ fi
+ if test -f $dir/lex; then
+ LEX=lex
+ break
+ fi
+ done
+ IFS="$save_ifs"
+ LEX=${LEX-flex}
fi
-done
-
-# Produce a warning message for the subdirs we can't configure.
-# This isn't especially interesting in the Cygnus tree, but in the individual
-# FSF releases, it's important to let people know when their machine isn't
-# supported by the one or two programs in a package.
-if test -n "${notsupp}" && test -z "${norecursion}" ; then
- # If $appdirs is non-empty, at least one of those directories must still
- # be configured, or we error out. (E.g., if the gas release supports a
- # specified target in some subdirs but not the gas subdir, we shouldn't
- # pretend that all is well.)
- if test -n "$appdirs" ; then
- for dir in $appdirs ; do
- if test -r $dir/Makefile.in ; then
- if echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
- appdirs=""
- break
- fi
- if echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
- appdirs=""
- break
+else
+ # Set reasonable default values for some tools even if not Canadian.
+ # Of course, these are different reasonable default values, originally
+ # specified directly in the Makefile.
+ # We don't export, so that autoconf can do its job.
+ # Note that all these settings are above the fragment inclusion point
+ # in Makefile.in, so can still be overridden by fragments.
+ # This is all going to change when we autoconfiscate...
+
+ BISON="\$(USUAL_BISON)"
+ CC_FOR_BUILD="\$(CC)"
+ GCC_FOR_TARGET="\$(USUAL_GCC_FOR_TARGET)"
+ BUILD_PREFIX=
+ BUILD_PREFIX_1=loser-
+ MAKEINFO="\$(USUAL_MAKEINFO)"
+ LEX="\$(USUAL_LEX)"
+ YACC="\$(USUAL_YACC)"
+
+ # If CC is still not set, try to get gcc.
+ cc_prog_is_gcc=
+ if test -z "${CC}" ; then
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
+ for dir in $PATH; do
+ test -z "$dir" && dir=.
+ if test -f $dir/gcc; then
+ CC="gcc"
+ cc_prog_is_gcc=yes
+ echo 'void f(){}' > conftest.c
+ if test -z "`${CC} -g -c conftest.c 2>&1`"; then
+ CFLAGS=${CFLAGS-"-g -O2"}
+ CXXFLAGS=${CXXFLAGS-"-g -O2"}
+ else
+ CFLAGS=${CFLAGS-"-O2"}
+ CXXFLAGS=${CXXFLAGS-"-O2"}
fi
+ rm -f conftest*
+ break
fi
done
- if test -n "$appdirs" ; then
- echo "*** This configuration is not supported by this package." 1>&2
- exit 1
+ IFS="$save_ifs"
+ CC=${CC-cc}
+ else
+ # Determine if we are using gcc.
+ cat > conftest.c <<EOF
+#ifdef __GNUC__
+ yes;
+#endif
+EOF
+ if ${CC} -E conftest.c | grep yes >/dev/null 2>&1; then
+ cc_prog_is_gcc=yes
+ fi
+ rm -f conftest.c
+ if test -z "${CFLAGS}"; then
+ # Here CC is set but CFLAGS is not. Use a quick hack to use -O2 if CC
+ # is set to a version of gcc.
+ if test "$cc_prog_is_gcc" = yes; then
+ echo 'void f(){}' > conftest.c
+ if test -z "`${CC} -g -c conftest.c 2>&1`"; then
+ CFLAGS=${CFLAGS-"-g -O2"}
+ CXXFLAGS=${CXXFLAGS-"-g -O2"}
+ else
+ CFLAGS=${CFLAGS-"-O2"}
+ CXXFLAGS=${CXXFLAGS-"-O2"}
+ fi
+ rm -f conftest*
+ fi
fi
fi
- # Okay, some application will build, or we don't care to check. Still
- # notify of subdirs not getting built.
- echo "*** This configuration is not supported in the following subdirectories:" 1>&2
- echo " ${notsupp}" 1>&2
- echo " (Any other directories should still work fine.)" 1>&2
-fi
-
-# Set with_gnu_as and with_gnu_ld as appropriate.
-#
-# This is done by determining whether or not the appropriate directory
-# is available, and by checking whether or not specific configurations
-# have requested that this magic not happen.
-#
-# The command line options always override the explicit settings in
-# configure.in, and the settings in configure.in override this magic.
-#
-# If the default for a toolchain is to use GNU as and ld, and you don't
-# want to do that, then you should use the --without-gnu-as and
-# --without-gnu-ld options for the configure script.
-if test x${use_gnu_as} = x ; then
- if test x${with_gnu_as} != xno && echo " ${configdirs} " | grep " gas " > /dev/null 2>&1 && test -d ${srcdir}/gas ; then
- with_gnu_as=yes
- withoptions="$withoptions --with-gnu-as"
+ # We must set the default linker to the linker used by gcc for the correct
+ # operation of libtool. If LD is not defined and we are using gcc, try to
+ # set the LD default to the ld used by gcc.
+ if test -z "$LD"; then
+ if test "$cc_prog_is_gcc" = yes; then
+ case $build in
+ *-*-mingw*)
+ gcc_prog_ld=`$CC -print-prog-name=ld 2>&1 | tr -d '\015'` ;;
+ *)
+ gcc_prog_ld=`$CC -print-prog-name=ld 2>&1` ;;
+ esac
+ case $gcc_prog_ld in
+ # Accept absolute paths.
+ [[\\/]* | [A-Za-z]:[\\/]*)]
+ LD="$gcc_prog_ld" ;;
+ esac
+ fi
fi
-fi
-if test x${use_gnu_ld} = x ; then
- if test x${with_gnu_ld} != xno && echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 && test -d ${srcdir}/ld ; then
- with_gnu_ld=yes
- withoptions="$withoptions --with-gnu-ld"
- fi
+ CXX=${CXX-"c++"}
+ CFLAGS=${CFLAGS-"-g"}
+ CXXFLAGS=${CXXFLAGS-"-g -O2"}
fi
-# If using newlib, add --with-newlib to the withoptions so that gcc/configure
-# can detect this case.
+# FIXME Should this be done recursively ??? (Useful for e.g. gdbtest)
+# Set up the list of links to be made.
+# ${links} is the list of link names, and ${files} is the list of names to link to.
-if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 && test -d ${srcdir}/newlib ; then
- with_newlib=yes
- withoptions="$withoptions --with-newlib"
+# Make the links.
+configlinks="${links}"
+if test -r ./config.status ; then
+ mv -f ./config.status ./config.back
fi
+while test -n "${files}" ; do
+ # set file to car of files, files to cdr of files
+ set ${files}; file=$1; shift; files=$*
+ set ${links}; link=$1; shift; links=$*
+
+ if test ! -r ${srcdir}/${file} ; then
+ if test ! -r ${file} ; then
+ echo '***' "${progname}: cannot create a link \"${link}\"," 1>&2
+ echo '***' "since the file \"${srcdir}/${file}\" does not exist." 1>&2
+ exit 1
+ else
+ srcfile=${file}
+ fi
+ else
+ srcfile=${srcdir}/${file}
+ fi
-rm -f mt-frag
-if test -n "${target_makefile_frag}" ; then
- for f in ${target_makefile_frag}
- do
- cat ${srcdir}/$f >> mt-frag
- done
- target_makefile_frag=mt-frag
-fi
+ ${remove} -f ${link}
+ # Make a symlink if possible, otherwise try a hard link
+ if ${symbolic_link} ${srcfile} ${link} >/dev/null 2>&1 ; then
+ true
+ else
+ # We need to re-remove the file because Lynx leaves a
+ # very strange directory there when it fails an NFS symlink.
+ ${remove} -r -f ${link}
+ ${hard_link} ${srcfile} ${link}
+ fi
+ if test ! -r ${link} ; then
+ echo '***' "${progname}: unable to link \"${link}\" to \"${srcfile}\"." 1>&2
+ exit 1
+ fi
-case "$host" in
- *msdosdjgpp*)
- enable_gdbtk=no ;;
-esac
-# Determine whether gdb needs tk/tcl or not.
-case "$enable_gdbtk" in
- no)
- GDB_TK="" ;;
- *)
- GDB_TK="all-tcl all-tk all-itcl all-tix all-libgui" ;;
-esac
+ echo "Linked \"${link}\" to \"${srcfile}\"."
+done
-# post-target:
+# Create a .gdbinit file which runs the one in srcdir
+# and tells GDB to look there for source files.
+
+if test -r ${srcdir}/.gdbinit ; then
+ case ${srcdir} in
+ .) ;;
+ *) cat > ./.gdbinit <<EOF
+# ${NO_EDIT}
+dir ${srcdir}
+dir .
+source ${srcdir}/.gdbinit
+EOF
+ ;;
+ esac
+fi
# Make sure that the compiler is able to generate an executable. If it
# can't, we are probably in trouble. We don't care whether we can run the
case "${host}" in
sparc-sun-solaris2*)
CCBASE="`echo ${CC-cc} | sed 's/ .*$//'`"
- if test "`type $CCBASE | sed 's/^[^/]*//'`" = "/usr/ucb/cc" ; then
+ if test "`type $CCBASE | sed 's/^[[^/]]*//'`" = "/usr/ucb/cc" ; then
could_use=
test -d /opt/SUNWspro/bin && could_use="/opt/SUNWspro/bin"
if test -d /opt/cygnus/bin ; then
# If --enable-shared was set, we must set LD_LIBRARY_PATH so that the
# binutils tools will find libbfd.so.
-if test "${shared}" = "yes" ; then
- sed -e 's/^SET_LIB_PATH[ ]*=.*$/SET_LIB_PATH = $(REALLY_SET_LIB_PATH)/' \
- Makefile > Makefile.tem
- rm -f Makefile
- mv -f Makefile.tem Makefile
-
- case "${host}" in
- *-*-hpux*)
- sed -e 's/^RPATH_ENVVAR[ ]*=.*$/RPATH_ENVVAR = SHLIB_PATH/' \
- Makefile > Makefile.tem
- rm -f Makefile
- mv -f Makefile.tem Makefile
- ;;
- esac
+case "${enable_shared}" in
+ no | "") SET_LIB_PATH= ;;
+ *) SET_LIB_PATH="\$(REALLY_SET_LIB_PATH)" ;;
+esac
+
+case "${host}" in
+ *-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
+ *) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
+esac
+
+# Record target_configdirs and the configure arguments for target and
+# build configuration in Makefile.
+target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
+
+# This is the final value for target_configdirs. configdirs already
+# has its final value. It's time to create some lists of valid targets.
+
+# While at that, we remove Makefiles if we were started for recursive
+# configuration, such that the top-level Makefile reconfigures them,
+# like we used to do when configure itself was recursive.
+
+all_build_modules=
+configure_build_modules=
+# Only make build modules if build != host.
+# This should be done more generally, but at the moment it doesn't matter.
+if test ${host_alias} != ${build_alias} ; then
+ for module in libiberty ; do
+ all_build_modules=all-build-${module}
+ configure_build_modules=configure-build-${module}
+ if test -z "${no_recursion}" \
+ && test -f ${build_subdir}/${module}/Makefile; then
+ echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure"
+ rm -f ${build_subdir}/${module}/Makefile
+ fi
+ done
fi
-# Base args. Strip norecursion, cache-file, srcdir, host, build, target.
-# These are the ones we might not want to pass down to subconfigures.
-baseargs=`echo "${arguments}" | \
- sed -e 's/--no[^ ]*//' \
- -e 's/--cache[a-z-]*=[^ ]*//' \
- -e 's/--sr[a-z-]*=[^ ]*//' \
- -e 's/--ho[a-z-]*=[^ ]*//' \
- -e 's/--bu[a-z-]*=[^ ]*//' \
- -e 's/--ta[a-z-]*=[^ ]*//'`
+all_host_modules=
+check_host_modules=
+install_host_modules=
+configure_host_modules=
+for module in ${configdirs} ; do
+ all_host_modules="${all_host_modules} all-${module}"
+ check_host_modules="${check_host_modules} check-${module}"
+ install_host_modules="${install_host_modules} install-${module}"
+ configure_host_modules="${configure_host_modules} configure-${module}"
+ if test -z "${no_recursion}" \
+ && test -f ${module}/Makefile; then
+ echo 1>&2 "*** removing ${module}/Makefile to force reconfigure"
+ rm -f ${module}/Makefile
+ fi
+done
+install_host_modules_nogcc=`echo "${install_host_modules}" | sed -e 's/install-gcc//g'`
+
+all_target_modules=
+check_target_modules=
+install_target_modules=
+configure_target_modules=
+for module in ${target_configdirs} ; do
+ all_target_modules="${all_target_modules} all-target-${module}"
+ check_target_modules="${check_target_modules} check-target-${module}"
+ install_target_modules="${install_target_modules} install-target-${module}"
+ configure_target_modules="${configure_target_modules} configure-target-${module}"
+ if test -z "${no_recursion}" \
+ && test -f ${target_subdir}/${module}/Makefile; then
+ echo 1>&2 "*** removing ${target_subdir}/${module}/Makefile to force reconfigure"
+ rm -f ${target_subdir}/${module}/Makefile
+ fi
+done
+
+# Determine whether gdb needs tk/tcl or not.
+# Use 'maybe' since enable_gdbtk might be true even if tk isn't available
+# and in that case we want gdb to be built without tk. Ugh!
+# In fact I believe gdb is the *only* package directly dependent on tk,
+# so we should be able to put the 'maybe's in unconditionally and
+# leave out the maybe dependencies when enable_gdbtk is false. I'm not
+# 100% sure that that's safe though.
+
+gdb_tk="maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-tix maybe-all-libgui"
+case "$enable_gdbtk" in
+ no)
+ GDB_TK="" ;;
+ yes)
+ GDB_TK="${gdb_tk}" ;;
+ *)
+ # Only add the dependency on gdbtk when GDBtk is part of the gdb
+ # distro. Eventually someone will fix this and move Insight, nee
+ # gdbtk to a separate directory.
+ if test -d ${srcdir}/gdb/gdbtk ; then
+ GDB_TK="${gdb_tk}"
+ else
+ GDB_TK=""
+ fi
+ ;;
+esac
+
+# Create the 'maybe dependencies'. This uses a temporary file.
+rm -f maybedep.tmp
+echo '# maybedep.tmp' > maybedep.tmp
+for item in ${all_build_modules} ${all_host_modules} ${all_target_modules} \
+ ${install_host_modules} ${install_target_modules} \
+ ${configure_build_modules} ${configure_host_modules} ${configure_target_modules} \
+ ; do
+ echo "maybe-${item}: ${item}" >> maybedep.tmp
+done
+maybe_dependencies=maybedep.tmp
+AC_SUBST_FILE(maybe_dependencies)
+
+# Create the serialization dependencies. This uses a temporary file.
+
+AC_ARG_ENABLE([serial-configure],
+[ --disable-serial-[{host,target,build}-]configure
+ Don't force sequential configuration of
+ sub-packages for the host, target or build
+ machine, or of any sub-packages at all])
+
+# These force 'configure's to be done one at a time, to avoid problems
+# with contention over a shared config.cache.
+rm -f serdep.tmp
+echo '# serdep.tmp' > serdep.tmp
+olditem=
+test "x${enable_serial_configure}" = xno ||
+test "x${enable_serial_build_configure}" = xno ||
+for item in ${build_configdirs} ; do
+ case ${olditem} in
+ "") ;;
+ *) echo "configure-build-${item}: configure-build-${olditem}" >> serdep.tmp ;;
+ esac
+ olditem=${item}
+done
+olditem=
+test "x${enable_serial_configure}" = xno ||
+test "x${enable_serial_host_configure}" = xno ||
+for item in ${configdirs} ; do
+ case ${olditem} in
+ "") ;;
+ *) echo "configure-${item}: configure-${olditem}" >> serdep.tmp ;;
+ esac
+ olditem=${item}
+done
+olditem=
+test "x${enable_serial_configure}" = xno ||
+test "x${enable_serial_target_configure}" = xno ||
+for item in ${target_configdirs} ; do
+ case ${olditem} in
+ "") ;;
+ *) echo "configure-target-${item}: configure-target-${olditem}" >> serdep.tmp ;;
+ esac
+ olditem=${item}
+done
+serialization_dependencies=serdep.tmp
+AC_SUBST_FILE(serialization_dependencies)
+
+# Base args. Strip norecursion, cache-file, srcdir, host, build,
+# target and nonopt. These are the ones we might not want to pass
+# down to subconfigures.
+baseargs=`echo " ${ac_configure_args} " | \
+ sed -e 's/ --no[[^ ]]* / /' \
+ -e 's/ --c[[a-z-]]*[[= ]][[^ ]]* / /' \
+ -e 's/ --sr[[a-z-]]*[[= ]][[^ ]]* / /' \
+ -e 's/ --ho[[a-z-]]*[[= ]][[^ ]]* / /' \
+ -e 's/ --bu[[a-z-]]*[[= ]][[^ ]]* / /' \
+ -e 's/ --t[[a-z-]]*[[= ]][[^ ]]* / /' \
+ -e 's/ -cache-file[[= ]][[^ ]]* / /' \
+ -e 's/ -srcdir[[= ]][[^ ]]* / /' \
+ -e 's/ -host[[= ]][[^ ]]* / /' \
+ -e 's/ -build[[= ]][[^ ]]* / /' \
+ -e 's/ -target[[= ]][[^ ]]* / /' \
+ -e 's/ [[^ -][^ ]*] / /' \
+ -e 's/^ *//;s/ *$//'`
# For the build-side libraries, we just need to pretend we're native,
# and not use the same cache file. Multilibs are neither needed nor
# desired.
-buildargs="--cache-file=../config.cache --build=${build_alias} --host=${build_alias} ${baseargs}"
+build_configargs="--cache-file=../config.cache --build=${build_alias} --host=${build_alias} ${baseargs}"
+
+# For host modules, accept cache file option, or specification as blank.
+case "${cache_file}" in
+"") # empty
+ cache_file_option="" ;;
+/* | [[A-Za-z]]:[[\\/]]* ) # absolute path
+ cache_file_option="--cache-file=${cache_file}" ;;
+*) # relative path
+ cache_file_option="--cache-file=../${cache_file}" ;;
+esac
-# Record target_configdirs and the configure arguments for target and
-# build configuration in Makefile.
-target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
-targargs=${baseargs}
+host_configargs="${cache_file_option} --build=${build_alias} --host=${host_alias} --target=${target_alias} ${extra_host_args} ${baseargs}"
+
+target_configargs=${baseargs}
# Passing a --with-cross-host argument lets the target libraries know
# whether they are being built with a cross-compiler or being built
# sorts of decisions they want to make on this basis. Please consider
# this option to be deprecated. FIXME.
if test x${is_cross_compiler} = xyes ; then
- targargs="--with-cross-host=${host_alias} ${targargs}"
+ target_configargs="--with-cross-host=${host_alias} ${target_configargs}"
fi
# Default to --enable-multilib.
if test x${enable_multilib} = x ; then
- targargs="--enable-multilib ${targargs}"
+ target_configargs="--enable-multilib ${target_configargs}"
fi
# Pass --with-newlib if appropriate. Note that target_configdirs has
# changed from the earlier setting of with_newlib.
if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " newlib " > /dev/null 2>&1 && test -d ${srcdir}/newlib ; then
- targargs="--with-newlib ${targargs}"
+ target_configargs="--with-newlib ${target_configargs}"
fi
# Pass the appropriate --host, --build, and --cache-file arguments.
-targargs="--cache-file=../config.cache --host=${target_alias} --build=${build_alias} ${targargs}"
+target_configargs="--cache-file=../config.cache --host=${target_alias} --build=${build_alias} ${target_configargs}"
# provide a proper gxx_include_dir.
# Note, if you change the default, make sure to fix both here and in
# the gcc and libstdc++-v3 subdirectories.
# Check whether --with-gxx-include-dir or --without-gxx-include-dir was given.
-gxx_include_dir=
-if test -n "${with_gxx_include_dir}"; then
- case "${with_gxx_include_dir}" in
- yes )
- echo "configure.in: error: bad value ${withval} given for g++ include directory" 1>&2
- exit 1
- ;;
- no )
- ;;
- * )
- gxx_include_dir=${with_gxx_include_dir}
- ;;
- esac
-fi
-if test x${gxx_include_dir} = x; then
- if test x${enable_version_specific_runtime_libs} = xyes; then
- gxx_include_dir='${libsubdir}/include/g++'
- else
- . ${srcdir}/config.if
- gxx_include_dir='${prefix}/include/${libstdcxx_incdir}'
- fi
-else
- gxx_include_dir=${gxx_include_dir}
-fi
+case "${with_gxx_include_dir}" in
+ yes)
+ AC_MSG_ERROR([--with-gxx-include-dir=[[dir]] requires a directory])
+ ;;
+ no | "")
+ case "${enable_version_specific_runtime_libs}" in
+ yes) gxx_include_dir='${libsubdir}/include/c++' ;;
+ *)
+ . ${srcdir}/config.if
+ gxx_include_dir='${prefix}/include/'${libstdcxx_incdir} ;;
+ esac ;;
+ *) gxx_include_dir=${with_gxx_include_dir} ;;
+esac
FLAGS_FOR_TARGET=
-case " $skipdirs " in
-*" target-newlib "*) ;;
-*)
- case " $target_configdirs " in
+case " $target_configdirs " in
*" newlib "*)
- case " $targargs " in
+ case " $target_configargs " in
*" --with-newlib "*)
case "$target" in
*-cygwin*)
fi
case "${target}-${is_cross_compiler}" in
- i[3456]86-*-linux*-no)
+ i[[3456]]86-*-linux*-no)
# Here host == target, so we don't need to build gcc,
# so we don't want to discard standard headers.
FLAGS_FOR_TARGET=`echo " $FLAGS_FOR_TARGET " | sed -e 's/ -nostdinc / /'`
;;
esac
;;
- esac
- ;;
esac
# On Canadian crosses, we'll be searching the right directories for
# being built; programs in there won't even run.
if test "${build}" = "${host}" && test -d ${srcdir}/gcc; then
# Search for pre-installed headers if nothing else fits.
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include'
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include'
fi
-if test "x${use_gnu_ld}" = x && test "x${with_gnu_ld}" != xno &&
- echo " ${configdirs} " | grep " ld " > /dev/null &&
- test -d ${srcdir}/ld; then
+if test "x${use_gnu_ld}" = x &&
+ echo " ${configdirs} " | grep " ld " > /dev/null ; then
# Arrange for us to find uninstalled linker scripts.
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/ld'
fi
elif test "$host" = "$target"; then
CC_FOR_TARGET='$(CC)'
else
- CC_FOR_TARGET=`echo gcc | sed -e 's/x/x/' ${program_transform_name}`
+ CC_FOR_TARGET=`echo gcc | sed "${program_transform_name}"`
fi
-# On Canadian crosses, configure reads CC_FOR_TARGET from Makefile,
-# if Makefile exists. Prevent $(FLAGS_FOR_TARGET) from being duplicated.
-case $CC_FOR_TARGET in
-*' $(FLAGS_FOR_TARGET)') ;;
-*) CC_FOR_TARGET=$CC_FOR_TARGET' $(FLAGS_FOR_TARGET)' ;;
-esac
+CC_FOR_TARGET=$CC_FOR_TARGET' $(FLAGS_FOR_TARGET)'
if test "x${GCJ_FOR_TARGET+set}" = xset; then
:
elif test "$host" = "$target"; then
GCJ_FOR_TARGET='gcj'
else
- GCJ_FOR_TARGET=`echo gcj | sed -e 's/x/x/' ${program_transform_name}`
+ GCJ_FOR_TARGET=`echo gcj | sed "${program_transform_name}"`
fi
-case $GCJ_FOR_TARGET in
-*' $(FLAGS_FOR_TARGET)') ;;
-*) GCJ_FOR_TARGET=$GCJ_FOR_TARGET' $(FLAGS_FOR_TARGET)' ;;
-esac
+GCJ_FOR_TARGET=$GCJ_FOR_TARGET' $(FLAGS_FOR_TARGET)'
# Don't use libstdc++-v3's flags to configure/build itself.
-libstdcxx_flags='`case $$dir in libstdc++-v3 | libjava) ;; *) test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/testsuite_flags --build-includes;; esac` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
+libstdcxx_flags='`test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
+raw_libstdcxx_flags=' -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
if test "x${CXX_FOR_TARGET+set}" = xset; then
:
# We add -shared-libgcc to CXX_FOR_TARGET whenever we use xgcc instead
# of g++ for linking C++ or Java, because g++ has -shared-libgcc by
# default whereas gcc does not.
- CXX_FOR_TARGET='$$r/gcc/`case $$dir in libstdc++-v3 | libjava) echo xgcc -shared-libgcc ;; *) echo g++ ;; esac` -B$$r/gcc/ -nostdinc++ '$libstdcxx_flags
+ # RAW_CXX_FOR_TARGET is for linking C++ or java; CXX_FOR_TARGET is for
+ # all other cases.
+ CXX_FOR_TARGET='$$r/gcc/g++ -B$$r/gcc/ -nostdinc++ '$libstdcxx_flags
+ RAW_CXX_FOR_TARGET='$$r/gcc/xgcc -shared-libgcc -B$$r/gcc/ -nostdinc++ '$raw_libstdcxx_flags
elif test "$host" = "$target"; then
CXX_FOR_TARGET='$(CXX)'
+ RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
else
- CXX_FOR_TARGET=`echo c++ | sed -e 's/x/x/' ${program_transform_name}`
+ CXX_FOR_TARGET=`echo c++ | sed "${program_transform_name}"`
+ RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
fi
-case $CXX_FOR_TARGET in
-*' $(FLAGS_FOR_TARGET)') ;;
-*) CXX_FOR_TARGET=$CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)' ;;
-esac
-qCXX_FOR_TARGET=`echo "$CXX_FOR_TARGET" | sed 's,[&%],\\\&,g'`
+CXX_FOR_TARGET=$CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)'
+RAW_CXX_FOR_TARGET=$RAW_CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)'
+
+qCXX_FOR_TARGET=`echo "$CXX_FOR_TARGET" | sed 's,[[&%]],\\\&,g'`
+qRAW_CXX_FOR_TARGET=`echo "$RAW_CXX_FOR_TARGET" | sed 's,[[&%]],\\\&,g'`
# We want to defer the evaluation of `cmd`s and shell variables in
# CXX_FOR_TARGET when recursing in the top-level Makefile, such as for
# quotes, but we still have to duplicate `$'s so that shell variables
# can be expanded by the nested make as shell variables, not as make
# macros.
-qqCXX_FOR_TARGET=`echo "$qCXX_FOR_TARGET" | sed -e 's,[$][$],$$$$,g'`
-
-sedtemp=sed.$$
-cat >$sedtemp <<EOF
-s:^TARGET_CONFIGDIRS[ ]*=.*$:TARGET_CONFIGDIRS = ${target_configdirs}:
-s%^TARGET_CONFIGARGS[ ]*=.*$%TARGET_CONFIGARGS = ${targargs}%
-s%^FLAGS_FOR_TARGET[ ]*=.*$%FLAGS_FOR_TARGET = ${FLAGS_FOR_TARGET}%
-s%^CC_FOR_TARGET[ ]*=.*$%CC_FOR_TARGET = ${CC_FOR_TARGET}%
-s%^GCJ_FOR_TARGET[ ]*=.*$%GCJ_FOR_TARGET = ${GCJ_FOR_TARGET}%
-s%^CXX_FOR_TARGET[ ]*=.*$%CXX_FOR_TARGET = ${qCXX_FOR_TARGET}%
-s%^CXX_FOR_TARGET_FOR_RECURSIVE_MAKE[ ]*=.*$%CXX_FOR_TARGET_FOR_RECURSIVE_MAKE = ${qqCXX_FOR_TARGET}%
-s%^TARGET_SUBDIR[ ]*=.*$%TARGET_SUBDIR = ${target_subdir}%
-s%^BUILD_SUBDIR[ ]*=.*$%BUILD_SUBDIR = ${build_subdir}%
-s%^BUILD_CONFIGARGS[ ]*=.*$%BUILD_CONFIGARGS = ${buildargs}%
-s%^gxx_include_dir[ ]*=.*$%gxx_include_dir=${gxx_include_dir}%
-EOF
-sed -f $sedtemp Makefile > Makefile.tem
-rm -f Makefile $sedtemp
-mv -f Makefile.tem Makefile
+qqCXX_FOR_TARGET=`echo "$qCXX_FOR_TARGET" | sed -e 's,[[$]][[$]],$$$$,g'`
+qqRAW_CXX_FOR_TARGET=`echo "$qRAW_CXX_FOR_TARGET" | sed -e 's,[[$]][[$]],$$$$,g'`
+
+# Wrap CC_FOR_TARGET and friends, for certain types of builds.
+CC_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${CC_FOR_TARGET}"
+GCJ_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${GCJ_FOR_TARGET}"
+CXX_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${qCXX_FOR_TARGET}"
+RAW_CXX_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${qRAW_CXX_FOR_TARGET}"
+CXX_FOR_TARGET_FOR_RECURSIVE_MAKE="\$(STAGE_CC_WRAPPER) ${qqCXX_FOR_TARGET}"
+RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE="\$(STAGE_CC_WRAPPER) ${qqRAW_CXX_FOR_TARGET}"
+
+# Makefile fragments.
+host_makefile_frag=${srcdir}/${host_makefile_frag}
+target_makefile_frag=${srcdir}/${target_makefile_frag}
+alphaieee_frag=${srcdir}/${alphaieee_frag}
+ospace_frag=${srcdir}/${ospace_frag}
+AC_SUBST_FILE(host_makefile_frag)
+AC_SUBST_FILE(target_makefile_frag)
+AC_SUBST_FILE(alphaieee_frag)
+AC_SUBST_FILE(ospace_frag)
+
+# Miscellanea: directories, flags, etc.
+AC_SUBST(SET_LIB_PATH)
+AC_SUBST(RPATH_ENVVAR)
+AC_SUBST(BUILD_PREFIX)
+AC_SUBST(BUILD_PREFIX_1)
+AC_SUBST(configlinks)
+AC_SUBST(gcc_version_trigger)
+AC_SUBST(gcc_version)
+AC_SUBST(tooldir)
+AC_SUBST(build_tooldir)
+AC_SUBST(GDB_TK)
+AC_SUBST(gxx_include_dir)
+AC_SUBST(libstdcxx_incdir)
+
+# Build module lists & subconfigure args.
+AC_SUBST(build_subdir)
+AC_SUBST(build_configargs)
+AC_SUBST(configure_build_modules)
+AC_SUBST(all_build_modules)
+
+# Host module lists & subconfigure args.
+AC_SUBST(host_configargs)
+AC_SUBST(configdirs)
+AC_SUBST(configure_host_modules)
+AC_SUBST(all_host_modules)
+AC_SUBST(check_host_modules)
+AC_SUBST(install_host_modules)
+AC_SUBST(install_host_modules_nogcc)
+
+# Target module lists & subconfigure args.
+AC_SUBST(target_subdir)
+AC_SUBST(target_configargs)
+AC_SUBST(target_configdirs)
+AC_SUBST(configure_target_modules)
+AC_SUBST(all_target_modules)
+AC_SUBST(check_target_modules)
+AC_SUBST(install_target_modules)
+
+# Build tools.
+AC_SUBST(BISON)
+AC_SUBST(CC_FOR_BUILD)
+AC_SUBST(LEX)
+AC_SUBST(MAKEINFO)
+AC_SUBST(YACC)
+AC_SUBST(config_shell)
+
+# Host tools.
+NCN_STRICT_CHECK_TOOL(AR, ar)
+NCN_STRICT_CHECK_TOOL(AS, as)
+NCN_STRICT_CHECK_TOOL(DLLTOOL, dlltool)
+NCN_STRICT_CHECK_TOOL(LD, ld)
+NCN_STRICT_CHECK_TOOL(NM, nm)
+NCN_STRICT_CHECK_TOOL(RANLIB, ranlib, :)
+NCN_STRICT_CHECK_TOOL(WINDRES, windres)
+NCN_STRICT_CHECK_TOOL(OBJCOPY, objcopy)
+NCN_STRICT_CHECK_TOOL(OBJDUMP, objdump)
+AC_SUBST(CC)
+AC_SUBST(CXX)
+AC_SUBST(CFLAGS)
+AC_SUBST(CXXFLAGS)
+AC_SUBST(DEFAULT_YACC)
+AC_SUBST(DEFAULT_LEX)
+AC_SUBST(DEFAULT_M4)
+
+# Target tools.
+NCN_STRICT_CHECK_TARGET_TOOL(AR_FOR_TARGET, ar)
+NCN_STRICT_CHECK_TARGET_TOOL(AS_FOR_TARGET, as)
+NCN_STRICT_CHECK_TARGET_TOOL(DLLTOOL_FOR_TARGET, dlltool)
+NCN_STRICT_CHECK_TARGET_TOOL(LD_FOR_TARGET, ld)
+NCN_STRICT_CHECK_TARGET_TOOL(NM_FOR_TARGET, nm)
+NCN_STRICT_CHECK_TARGET_TOOL(RANLIB_FOR_TARGET, ranlib, :)
+NCN_STRICT_CHECK_TARGET_TOOL(WINDRES_FOR_TARGET, windres)
+
+AC_SUBST(GCC_FOR_TARGET)
+AC_SUBST(FLAGS_FOR_TARGET)
+AC_SUBST(CC_FOR_TARGET)
+AC_SUBST(GCJ_FOR_TARGET)
+AC_SUBST(CXX_FOR_TARGET)
+AC_SUBST(RAW_CXX_FOR_TARGET)
+AC_SUBST(CXX_FOR_TARGET_FOR_RECURSIVE_MAKE)
+AC_SUBST(RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE)
+
+# Fix up target tools.
+if test "x${build}" = "x${host}" ; then
+ # In this case, the newly built tools can and should be used,
+ # so we override the results of the autoconf tests.
+ # This should really only happen when the tools are actually being built,
+ # but that's a further refinement. The new build scheme, where
+ # tools are built into a structure paralleling where they're installed,
+ # should also eliminate all of this cleanly.
+ AR_FOR_TARGET="\$(USUAL_AR_FOR_TARGET)"
+ AS_FOR_TARGET="\$(USUAL_AS_FOR_TARGET)"
+ DLLTOOL_FOR_TARGET="\$(USUAL_DLLTOOL_FOR_TARGET)"
+ LD_FOR_TARGET="\$(USUAL_LD_FOR_TARGET)"
+ NM_FOR_TARGET="\$(USUAL_NM_FOR_TARGET)"
+ RANLIB_FOR_TARGET="\$(USUAL_RANLIB_FOR_TARGET)"
+ WINDRES_FOR_TARGET="\$(USUAL_WINDRES_FOR_TARGET)"
+fi
+# Certain tools may need extra flags.
+AR_FOR_TARGET=${AR_FOR_TARGET}${extra_arflags_for_target}
+RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target}
+NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
+
+AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
+AC_ARG_ENABLE(maintainer-mode,
+[ --enable-maintainer-mode enable make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer],
+ USE_MAINTAINER_MODE=$enableval,
+ USE_MAINTAINER_MODE=no)
+AC_MSG_RESULT($USE_MAINTAINER_MODE)
+AC_SUBST(MAINTAINER_MODE_TRUE)
+AC_SUBST(MAINTAINER_MODE_FALSE)
+if test "$USE_MAINTAINER_MODE" = yes; then
+ MAINTAINER_MODE_TRUE=
+ MAINTAINER_MODE_FALSE='#'
+else
+ MAINTAINER_MODE_TRUE='#'
+ MAINTAINER_MODE_FALSE=
+fi
+MAINT=$MAINTAINER_MODE_TRUE
+AC_SUBST(MAINT)dnl
-#
-# Local Variables:
-# fill-column: 131
-# End:
-#
+AC_OUTPUT(Makefile)
OSDN Git Service
