moveifchange=${srcdir}/move-if-change
+srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}`
+
+# We pass INSTALL explicitly to sub-makes. Make sure that it is not
+# a relative path.
+if test "$INSTALL" = "${srcdir}/install-sh -c"; then
+ INSTALL="${srcpwd}/install-sh -c"
+fi
+
# Set srcdir to "." if that's what it is.
# This is important for multilib support.
pwd=`${PWDCMD-pwd}`
-srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}`
if test "${pwd}" = "${srcpwd}" ; then
srcdir=.
fi
topsrcdir=$srcpwd
extra_host_args=
-# Define the trigger file to make sure configure will re-run whenever
-# the gcc version number changes.
-if test "${with_gcc_version_trigger+set}" = set ; then
- gcc_version_trigger="$with_gcc_version_trigger"
- gcc_version=`grep version_string ${with_gcc_version_trigger} | sed -e 's/.*\"\([[^ \"]]*\)[[ \"]].*/\1/'`
-else
- # If gcc's sources are available, define the trigger file.
- if test -f ${topsrcdir}/gcc/version.c ; then
- gcc_version_trigger=${topsrcdir}/gcc/version.c
- gcc_version=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([[^ \"]]*\)[[ \"]].*/\1/'`
- case "$ac_configure_args" in
- *--with-gcc-version-trigger=$gcc_version_trigger* )
- ;;
- * )
- # Add to all subconfigure arguments: build, host, and target.
- ac_configure_args="$ac_configure_args --with-gcc-version-trigger=$gcc_version_trigger"
- ;;
- esac
- fi
-fi
### To add a new directory to the tree, first choose whether it is a target
### or a host dependent tool. Then put it into the appropriate list
build_libs="build-libiberty"
# these tools are built for the build environment
-build_tools="build-texinfo build-byacc build-flex build-bison build-m4"
+build_tools="build-texinfo build-byacc build-flex build-bison build-m4 build-fixincludes"
# these libraries are used by various programs built for the host environment
#
-host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl tix libgui zlib libbanshee libcpp"
+host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp"
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
# know that we are building the simulator.
# binutils, gas and ld appear in that order because it makes sense to run
# "make check" in that particular order.
-host_tools="texinfo byacc flex bison binutils gas ld gcc sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar"
+host_tools="texinfo byacc flex bison binutils gas ld fixincludes gcc sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar gnattools"
# libgcj represents the runtime libraries only used by gcj.
libgcj="target-libffi \
## ${target_configdirs} is directories we build using the target tools.
configdirs=`echo ${host_libs} ${host_tools}`
target_configdirs=`echo ${target_libraries} ${target_tools}`
-
-# Only make build modules if build != host.
-if test ${host_alias} != ${build_alias} ; then
- build_configdirs=`echo ${build_libs} ${build_tools}`
-fi
+build_configdirs=`echo ${build_libs} ${build_tools}`
################################################################################
case ${with_x} in
yes | "") ;; # the default value for this tree is that X11 is available
no)
- skipdirs="${skipdirs} tk tix itcl libgui"
+ skipdirs="${skipdirs} tk itcl libgui"
# We won't be able to build gdbtk without X.
enable_gdbtk=no
;;
# If both --with-headers and --with-libs are specified, default to
# --without-newlib.
-if test x"${with_headers}" != x && test x"${with_headers} != xno \
- && test x"${with_libs}" != x && test x"${with_libs} != xno ; then
+if test x"${with_headers}" != x && test x"${with_headers}" != xno \
+ && test x"${with_libs}" != x && test x"${with_libs}" != xno ; then
if test x"${with_newlib}" = x ; then
with_newlib=no
fi
noconfigdirs="$noconfigdirs byacc"
;;
i[[3456789]]86-*-vsta)
- noconfigdirs="$noconfigdirs tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl tix gnuserv gettext"
+ noconfigdirs="$noconfigdirs tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl gnuserv gettext"
;;
i[[3456789]]86-*-go32* | i[[3456789]]86-*-msdosdjgpp*)
- noconfigdirs="$noconfigdirs tcl tk expect dejagnu send-pr uudecode guile itcl tix gnuserv libffi"
+ noconfigdirs="$noconfigdirs tcl tk expect dejagnu send-pr uudecode guile itcl gnuserv libffi"
;;
i[[3456789]]86-*-mingw32*)
- # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl tix gnuserv"
+ # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl gnuserv"
noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool"
;;
i[[3456789]]86-*-beos*)
- noconfigdirs="$noconfigdirs tk itcl tix libgui gdb"
+ noconfigdirs="$noconfigdirs tk itcl libgui gdb"
;;
*-*-cygwin*)
noconfigdirs="$noconfigdirs autoconf automake send-pr rcs guile perl"
noconfigdirs="$noconfigdirs rcs"
;;
ppc*-*-pe)
- noconfigdirs="$noconfigdirs patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl tix gnuserv"
+ noconfigdirs="$noconfigdirs patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl gnuserv"
;;
powerpc-*-beos*)
- noconfigdirs="$noconfigdirs tk itcl tix libgui gdb dejagnu readline"
- ;;
- *-*-darwin*)
- noconfigdirs="$noconfigdirs tk itcl tix libgui"
+ noconfigdirs="$noconfigdirs tk itcl libgui gdb dejagnu readline"
;;
esac
-AC_ARG_WITH(libbanshee,
-[ --without-libbanshee Don't build with libbanshee])
-case ${with_libbanshee} in
- no)
- noconfigdirs="$noconfigdirs libbanshee" ;;
- yes|"")
- with_libbanshee=yes
- ;;
- *)
- AC_MSG_ERROR([--with-libbanshee can only be empty, "yes" or "no" (empty defaults to "yes".])
-esac
AC_ARG_ENABLE(libada,
[ --enable-libada Builds libada directory],
ENABLE_LIBADA=yes)
if test "${ENABLE_LIBADA}" != "yes" ; then
noconfigdirs="$noconfigdirs target-libada"
+ noconfigdirs="$noconfigdirs gnattools"
fi
# Save it here so that, even in case of --enable-libgcj, if the Java
;;
powerpc-*-darwin*)
noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
- noconfigdirs="$noconfigdirs target-libobjc"
;;
*-*-darwin*)
noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
- noconfigdirs="$noconfigdirs target-libobjc ${libgcj}"
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
*-*-freebsd[[12]] | *-*-freebsd[[12]].* | *-*-freebsd*aout*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
- *-*-freebsd* | *-*-kfreebsd*-gnu)
+ *-*-freebsd*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
if test "x$with_gmp" = x && test "x$with_gmp_dir" = x \
&& test -f /usr/local/include/gmp.h; then
;;
esac
;;
- *-*-netware)
- noconfigdirs="$noconfigdirs target-libstdc++-v3 target-newlib target-libiberty target-libgloss ${libgcj}"
+ *-*-netware*)
+ noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss ${libgcj} target-libmudflap"
;;
*-*-rtems*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
noconfigdirs="$noconfigdirs ${libgcj}"
noconfigdirs="$noconfigdirs target-examples"
noconfigdirs="$noconfigdirs target-libiberty texinfo send-pr"
- noconfigdirs="$noconfigdirs tcl tix tk itcl libgui sim"
+ noconfigdirs="$noconfigdirs tcl tk itcl libgui sim"
noconfigdirs="$noconfigdirs expect dejagnu"
# the C++ libraries don't build on top of CE's C libraries
noconfigdirs="$noconfigdirs target-libstdc++-v3"
arc-*-*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
+ arm-semi-aof )
+ ;;
arm-*-coff | strongarm-*-coff | xscale-*-coff)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
- arm-*-elf* | strongarm-*-elf* | xscale-*-elf*)
+ arm-*-elf* | strongarm-*-elf* | xscale-*-elf* | arm*-*-eabi* )
noconfigdirs="$noconfigdirs target-libffi target-qthreads"
;;
- arm-*-pe*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+ arm*-*-symbianelf*)
+ noconfigdirs="$noconfigdirs ${libgcj} target-libiberty"
;;
- arm-*-oabi*)
+ arm-*-pe*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
thumb-*-coff)
thumb-*-elf)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
- thumb-*-oabi)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
thumb-*-pe)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
c54x*-*-* | tic54x-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib"
;;
- cris-*-*)
- noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
+ cris-*-* | crisv32-*-*)
+ case "${target}" in
+ *-*-elf | *-*-aout)
+ noconfigdirs="$noconfigdirs ${libgcj}";;
+ *)
+ noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss";;
+ esac
;;
crx-*-*)
- noconfigdirs="$noconfigdirs target-libgloss target-libstdc++-v3 target-mudflap ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libstdc++-v3 target-mudflap ${libgcj}"
;;
d10v-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
h8500-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
;;
+ hppa1.1-*-osf* | hppa1.1-*-bsd* )
+ ;;
hppa*64*-*-linux* | parisc*64*-*-linux*)
# In this case, it's because the hppa64-linux target is for
# the kernel only at this point and has no libc, and thus no
# headers, crt*.o, etc., all of which are needed by these.
noconfigdirs="$noconfigdirs target-zlib"
;;
+ parisc*-*-linux* | hppa*-*-linux*)
+ ;;
hppa*-*-*elf* | \
- parisc*-*-linux* | hppa*-*-linux* | \
hppa*-*-lites* | \
hppa*-*-openbsd* | \
hppa*64*-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
- # Do configure ld/binutils/gas for this case.
;;
hppa*-*-*)
# According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
;;
ia64*-*-elf*)
# No gdb support yet.
- noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb"
+ noconfigdirs="$noconfigdirs readline mmalloc libgui itcl gdb"
;;
ia64*-**-hpux*)
# No gdb or ld support yet.
- noconfigdirs="$noconfigdirs ${libgcj} tix readline mmalloc libgui itcl gdb ld"
+ noconfigdirs="$noconfigdirs ${libgcj} readline mmalloc libgui itcl gdb ld"
+ ;;
+ i370-*-opened*)
;;
i[[3456789]]86-*-coff | i[[3456789]]86-*-elf)
noconfigdirs="$noconfigdirs ${libgcj}"
# Can't build gdb for mingw32 if not native.
case "${host}" in
i[[3456789]]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
- *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix gnuserv"
+ *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl gnuserv"
;;
esac
;;
target_configdirs="$target_configdirs target-libtermcap target-winsup"
noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}"
# always build newlib if winsup directory is present.
- if test -d "$srcdir/winsup"
- then
+ if test -d "$srcdir/winsup"; then
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
- else
+ elif test -d "$srcdir/newlib"; then
echo "Warning: winsup is missing so newlib can't be built."
fi
# Can't build gdb for Cygwin if not native.
case "${host}" in
*-*-cygwin*) ;; # keep gdb tcl tk expect etc.
- *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix libgui gnuserv"
+ *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl libgui gnuserv"
;;
esac
;;
+ i[[3456789]]86-moss-msdos | i[[3456789]]86-*-moss* | \
+ i[[3456789]]86-*-uwin* | i[[3456789]]86-*-interix* )
+ ;;
i[[3456789]]86-*-pe)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
;;
noconfigdirs="$noconfigdirs target-libstdc++-v3"
;;
mmix-*-*)
- noconfigdirs="$noconfigdirs ${libgcj} gdb libgloss"
+ noconfigdirs="$noconfigdirs ${libgcj} gdb libgloss target-libgfortran"
;;
mn10200-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
target_configdirs="$target_configdirs target-winsup"
- noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl tix gnuserv ${libgcj}"
+ noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl gnuserv ${libgcj}"
# always build newlib.
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
;;
# This is temporary until we can link against shared libraries
powerpcle-*-solaris*)
- noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl tix gnuserv ${libgcj}"
+ noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl gnuserv ${libgcj}"
;;
powerpc-*-beos*)
noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
powerpc-*-eabi)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
+ powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems* )
+ ;;
rs6000-*-lynxos*)
noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
;;
romp-*-*)
noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
;;
- sh-*-*)
+ sh-*-* | sh64-*-*)
case "${host}" in
i[[3456789]]86-*-vsta) ;; # don't add gprof back in
i[[3456789]]86-*-go32*) ;; # don't add gprof back in
esac
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
- sh64-*-*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
sparc-*-elf*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
use_gnu_ld=no
fi
;;
+ sparc-*-solaris2.[[0-6]] | sparc-*-solaris2.[[0-6]].*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
;;
v810-*-*)
ip2k-*-*)
noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
;;
- *-*-linux*)
+ *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
*-*-lynxos*)
host_makefile_frag="config/mh-cygwin"
;;
*-mingw32*)
- host_makefile_frag="config/mh-mingw32"
;;
*-interix*)
host_makefile_frag="config/mh-interix"
tentative_cc="/usr/cygnus/progressive/bin/gcc"
host_makefile_frag="config/mh-lynxrs6k"
;;
+ powerpc-*-darwin*)
+ host_makefile_frag="config/mh-ppc-darwin"
+ ;;
*-*-lynxos*)
# /bin/cc is less than useful for our purposes. Always use GCC
tentative_cc="/bin/gcc"
*-*-sysv4*)
host_makefile_frag="config/mh-sysv4"
;;
+ # This is placed last to prevent interfering with the cases above.
+ i[[3456789]]86-*-*)
+ # Build the stage2 and stage3 compilers with -fomit-frame-pointer.
+ host_makefile_frag="config/mh-x86omitfp"
+ ;;
esac
fi
CXX_FOR_TARGET=${CXX_FOR_TARGET-${target_alias}-c++}
GCJ_FOR_TARGET=${GCJ_FOR_TARGET-${target_alias}-gcj}
GCC_FOR_TARGET=${GCC_FOR_TARGET-${CC_FOR_TARGET-${target_alias}-gcc}}
- BUILD_DIR_PREFIX=${build_subdir}
BUILD_PREFIX=${build_alias}-
BUILD_PREFIX_1=${build_alias}-
CC_FOR_BUILD="\$(CC)"
GCC_FOR_TARGET="\$(USUAL_GCC_FOR_TARGET)"
- BUILD_DIR_PREFIX=
BUILD_PREFIX=
BUILD_PREFIX_1=loser-
ACX_PROG_GNAT
ACX_PROG_CMP_IGNORE_INITIAL
-# Check for GMP
+# Check for GMP and MPFR
gmplibs=
gmpinc=
have_gmp=yes
+# Specify a location for mpfr
+# check for this first so it ends up on the link line before gmp.
+AC_ARG_WITH(mpfr-dir, [ --with-mpfr-dir=PATH Specify source directory for MPFR library])
+
+if test "x$with_mpfr_dir" != x; then
+ gmpinc="-I$with_mpfr_dir/mpfr"
+ gmplibs="$with_mpfr_dir/libmpfr.a"
+else
+ gmplibs="-lmpfr"
+fi
+
+AC_ARG_WITH(mpfr, [ --with-mpfr=PATH Specify directory for installed MPFR library])
+
+if test "x$with_mpfr" != x; then
+ gmplibs="-L$with_mpfr/lib $gmplibs"
+ gmpinc="-I$with_mpfr/include"
+fi
+
# Specify a location for gmp
AC_ARG_WITH(gmp-dir, [ --with-gmp-dir=PATH Specify source directory for GMP library])
-if test "x$with_gmp_dir" != x && test -f "$with_gmp_dir/gmp.h"; then
- gmpinc="-I$with_gmp_dir"
+if test "x$with_gmp_dir" != x; then
+ gmpinc="$gmpinc -I$with_gmp_dir"
if test -f "$with_gmp_dir/.libs/libgmp.a"; then
- gmplibs="$with_gmp_dir/.libs/libgmp.a"
+ gmplibs="$gmplibs $with_gmp_dir/.libs/libgmp.a"
elif test -f "$with_gmp_dir/_libs/libgmp.a"; then
- gmplibs="$with_gmp_dir/_libs/libgmp.a"
+ gmplibs="$gmplibs $with_gmp_dir/_libs/libgmp.a"
fi
# One of the later tests will catch the error if neither library is present.
+else
+ gmplibs="$gmplibs -lgmp"
fi
AC_ARG_WITH(gmp, [ --with-gmp=PATH Specify directory for installed GMP library])
-if test "x$with_gmp" != x && test -d "$with_gmp"; then
- gmplibs="-L$with_gmp/lib -lgmp"
- gmpinc="-I$with_gmp/include"
-fi
-
-# Use system gmp if nothing else specified
-if test "x$gmplibs" = x; then
- gmplibs="-lgmp"
+if test "x$with_gmp" != x; then
+ gmplibs="-L$with_gmp/lib $gmplibs"
+ gmpinc="-I$with_gmp/include $gmpinc"
fi
saved_CFLAGS="$CFLAGS"
[AC_MSG_RESULT([no]); have_gmp=no])
if test x"$have_gmp" = xyes; then
- AC_MSG_CHECKING([for mpf_init in -lgmp])
+ AC_MSG_CHECKING([for MPFR])
saved_LIBS="$LIBS"
LIBS="$LIBS $gmplibs"
- AC_TRY_LINK([#include <gmp.h>], [mpf_t n; mpf_init(n);],
+ AC_TRY_LINK([#include <gmp.h>
+#include <mpfr.h>], [mpfr_t n; mpfr_init(n);],
[AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); have_gmp=no])
LIBS="$saved_LIBS"
CFLAGS="$saved_CFLAGS"
fi
+# Flags needed for both GMP and/or MPFR
AC_SUBST(gmplibs)
AC_SUBST(gmpinc)
new_enable_languages=c
missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ `
+ potential_languages=c
for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
case ${lang_frag} in
lang_dirs=
boot_language=
build_by_default=
- need_gmp=
+ need_gmp=
. ${lang_frag}
+ potential_languages="${potential_languages},${language}"
# This is quite sensitive to the ordering of the case statement arms.
case ,${enable_languages},:${language}:${have_gnat}:${build_by_default} in
*::*:*)
echo "${lang_frag} doesn't set \$language." 1>&2
exit 1
- ;;
+ ;;
*:ada:no:*)
# Ada was requested with no preexisting GNAT. Disable unconditionally.
add_this_lang=no
;;
*,all,*:*:*:no)
# 'all' was selected, but this is not a default language
- # so do not include it.
+ # so do not include it.
add_this_lang=no
- ;;
+ ;;
*,all,*:*:*:*)
# 'all' was selected and this is a default language; include it.
add_this_lang=yes
;;
esac
- # Disable language that need GMP if it isn't available.
- if test x"$need_gmp" = xyes && test x"$have_gmp" = xno; then
- add_this_lang=no
- fi
+ # Disable languages that need GMP if it isn't available.
+ case ,${enable_languages},:${have_gmp}:${need_gmp} in
+ *,${language},*:no:yes)
+ # Specifically requested language; tell them.
+ AC_MSG_ERROR([GMP with MPFR support is required to build $language])
+ ;;
+ *:no:yes)
+ # Silently disable.
+ add_this_lang=no
+ ;;
+ esac
case $add_this_lang in
no)
missing_languages=`echo "$missing_languages" | sed -e "s/^,//" -e "s/,$//"`
if test "x$missing_languages" != x; then
AC_MSG_ERROR([
-The following requested languages were not found: ${missing_languages}])
+The following requested languages were not found: ${missing_languages}
+The available languages are: ${potential_languages}])
fi
if test "x$new_enable_languages" != "x$enable_languages"; then
ac_configure_args=`echo " $ac_configure_args" | sed -e 's/ --enable-languages=[[^ ]]*//' -e 's/$/ --enable-languages='"$enable_languages"/ `
fi
-# Remove the entries in $skipdirs and $noconfigdirs from $configdirs and
-# $target_configdirs.
+# Remove the entries in $skipdirs and $noconfigdirs from $configdirs,
+# $build_configdirs and $target_configdirs.
# If we have the source for $noconfigdirs entries, add them to $notsupp.
notsupp=""
for dir in . $skipdirs $noconfigdirs ; do
- dirname=`echo $dir | sed -e s/target-//g`
+ dirname=`echo $dir | sed -e s/target-//g -e s/build-//g`
if test $dir != . && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
if test -r $srcdir/$dirname/configure ; then
fi
fi
fi
+ if test $dir != . && echo " ${build_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ build_configdirs=`echo " ${build_configdirs} " | sed -e "s/ ${dir} / /"`
+ if test -r $srcdir/$dirname/configure ; then
+ if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ true
+ else
+ notsupp="$notsupp $dir"
+ fi
+ fi
+ fi
if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
if test -r $srcdir/$dirname/configure ; then
extra_ranlibflags_for_target=
target_makefile_frag=/dev/null
case "${target}" in
- i[[3456789]]86-*-netware*)
- target_makefile_frag="config/mt-netware"
- ;;
- powerpc-*-netware*)
+ *-*-netware*)
target_makefile_frag="config/mt-netware"
;;
*-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
extra_host_args="$extra_host_args --with-newlib"
fi
-if test x${with_libbanshee} = xyes && echo " ${configdirs} " | grep " libbanshee " >/dev/null 2>&1; then
- extra_host_args="$extra_host_args --with-libbanshee"
-fi
-
# Default to using --with-stabs for certain targets.
if test x${with_stabs} = x ; then
case "${target}" in
;;
esac
-# If --enable-shared was set, we must set LD_LIBRARY_PATH so that the
-# binutils tools will find libbfd.so.
-case "${enable_shared}" in
- no | "") SET_LIB_PATH= ;;
- *) SET_LIB_PATH="\$(REALLY_SET_LIB_PATH)" ;;
-esac
-
case "${host}" in
*-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
+ *-*-darwin* | *-*-rhapsody* ) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
*) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
esac
# leave out the maybe dependencies when enable_gdbtk is false. I'm not
# 100% sure that that's safe though.
-gdb_tk="maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-tix maybe-all-libgui"
+gdb_tk="maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-libgui"
case "$enable_gdbtk" in
no)
GDB_TK="" ;;
# not to nest @if/@endif pairs, because configure will not warn you at all.
AC_ARG_ENABLE([bootstrap],
-[ --enable-bootstrap Enable bootstrapping [no]],,
-enable_bootstrap=no)
-if test -d ${srcdir}/gcc; then
- case "$host:$target:$enable_bootstrap" in
- $build:$build:yes | *:no) ;;
- *:yes) AC_MSG_ERROR([cannot bootstrap a cross-compiler]) ;;
- *) AC_MSG_ERROR([invalid option for --enable-bootstrap]) ;;
- esac
-else
- if test $enable_bootstrap = yes; then
- AC_MSG_ERROR([cannot bootstrap without a compiler])
- fi
-fi
+[ --enable-bootstrap[=lean] Enable bootstrapping [no]],,
+enable_bootstrap=default)
+
+# Issue errors and warnings for invalid/strange bootstrap combinations.
+case "$configdirs" in
+ *gcc*) have_compiler=yes ;;
+ *) have_compiler=no ;;
+esac
+
+case "$have_compiler:$host:$target:$enable_bootstrap" in
+ *:*:*:no) ;;
+
+ # Default behavior. (We'll) enable bootstrap if we have a compiler
+ # and we are in a native configuration.
+ yes:$build:$build:default)
+ # This will become 'yes'
+ enable_bootstrap=no ;;
+
+ *:*:*:default)
+ enable_bootstrap=no ;;
+
+ # We have a compiler and we are in a native configuration, bootstrap is ok
+ yes:$build:$build:yes | yes:$build:$build:lean)
+ ;;
+
+ # Other configurations, but we have a compiler. Assume the user knows
+ # what he's doing.
+ yes:*:*:yes | yes:*:*:lean)
+ AC_MSG_WARN([trying to bootstrap a cross compiler])
+ ;;
+
+ # No compiler: if they passed --enable-bootstrap explicitly, fail
+ no:*:*:yes | no:*:*:lean)
+ AC_MSG_ERROR([cannot bootstrap without a compiler]) ;;
+ # Fail if wrong command line
+ *)
+ AC_MSG_ERROR([invalid option for --enable-bootstrap])
+ ;;
+esac
+
+# Adjust the toplevel makefile according to whether bootstrap was selected.
case "$enable_bootstrap" in
yes)
+ bootstrap_lean='#'
+ default_target=bootstrap
+ bootstrap_suffix=bootstrap ;;
+ lean)
+ bootstrap_lean=''
default_target=bootstrap
bootstrap_suffix=bootstrap ;;
no)
default_target=all
bootstrap_suffix=no-bootstrap ;;
esac
+AC_SUBST(bootstrap_lean)
AC_SUBST(default_target)
for module in ${build_configdirs} ; do
# For the build-side libraries, we just need to pretend we're native,
# and not use the same cache file. Multilibs are neither needed nor
# desired.
-build_configargs="--cache-file=../config.cache --build=${build_alias} --host=${build_alias} ${baseargs}"
+build_configargs="--cache-file=../config.cache --build=${build_alias} --host=${build_alias} --target=${target_alias} ${baseargs}"
# For host modules, accept cache file option, or specification as blank.
case "${cache_file}" in
# Pass the appropriate --host, --build, and --cache-file arguments.
target_configargs="--cache-file=./config.cache --host=${target_alias} --build=${build_alias} ${target_configargs}"
-# provide a proper gxx_include_dir.
-# Note, if you change the default, make sure to fix both here and in
-# the gcc and libstdc++-v3 subdirectories.
-# Check whether --with-gxx-include-dir or --without-gxx-include-dir was given.
-case "${with_gxx_include_dir}" in
- yes)
- AC_MSG_ERROR([--with-gxx-include-dir=[[dir]] requires a directory])
- ;;
- no | "")
- case "${enable_version_specific_runtime_libs}" in
- yes) gxx_include_dir='${libsubdir}/include/c++' ;;
- *)
- . ${srcdir}/config.if
- gxx_include_dir='${prefix}/include/'${libstdcxx_incdir} ;;
- esac ;;
- *) gxx_include_dir=${with_gxx_include_dir} ;;
-esac
-
FLAGS_FOR_TARGET=
case " $target_configdirs " in
*" newlib "*)
# to it. This is right: we don't want to search that directory
# for binaries, but we want the header files in there, so add
# them explicitly.
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -isystem $$r/gcc/include'
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -isystem $$r/$(HOST_SUBDIR)/gcc/include'
# Someone might think of using the pre-installed headers on
# Canadian crosses, in case the installed compiler is not fully
if test "x${use_gnu_ld}" = x &&
echo " ${configdirs} " | grep " ld " > /dev/null ; then
# Arrange for us to find uninstalled linker scripts.
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/ld'
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(HOST_SUBDIR)/ld'
fi
if test "x${CC_FOR_TARGET+set}" = xset; then
:
elif test -d ${srcdir}/gcc; then
- CC_FOR_TARGET='$$r/gcc/xgcc -B$$r/gcc/'
+ CC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/'
elif test "$host" = "$target"; then
CC_FOR_TARGET='$(CC)'
else
if test "x${GCJ_FOR_TARGET+set}" = xset; then
:
elif test -d ${srcdir}/gcc; then
- GCJ_FOR_TARGET='$$r/gcc/gcj -B$$r/gcc/'
+ GCJ_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc/'
elif test "$host" = "$target"; then
GCJ_FOR_TARGET='gcj'
else
if test "x${GFORTRAN_FOR_TARGET+set}" = xset; then
:
elif test -d ${srcdir}/gcc; then
- GFORTRAN_FOR_TARGET='$$r/gcc/gfortran -B$$r/gcc/'
+ GFORTRAN_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc/'
elif test "$host" = "$target"; then
GFORTRAN_FOR_TARGET='gfortran'
else
# default whereas gcc does not.
# RAW_CXX_FOR_TARGET is for linking C++ or java; CXX_FOR_TARGET is for
# all other cases.
- CXX_FOR_TARGET='$$r/gcc/g++ -B$$r/gcc/ -nostdinc++ '$libstdcxx_flags
- RAW_CXX_FOR_TARGET='$$r/gcc/xgcc -shared-libgcc -B$$r/gcc/ -nostdinc++ '$raw_libstdcxx_flags
+ CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ '$libstdcxx_flags
+ RAW_CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ '$raw_libstdcxx_flags
elif test "$host" = "$target"; then
CXX_FOR_TARGET='$(CXX)'
RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
AC_SUBST_FILE(ospace_frag)
# Miscellanea: directories, flags, etc.
-AC_SUBST(SET_LIB_PATH)
AC_SUBST(RPATH_ENVVAR)
-AC_SUBST(BUILD_DIR_PREFIX)
AC_SUBST(BUILD_PREFIX)
AC_SUBST(BUILD_PREFIX_1)
-AC_SUBST(gcc_version_trigger)
-AC_SUBST(gcc_version)
AC_SUBST(tooldir)
AC_SUBST(build_tooldir)
AC_SUBST(GDB_TK)
-AC_SUBST(gxx_include_dir)
-AC_SUBST(libstdcxx_incdir)
# Build module lists & subconfigure args.
AC_SUBST(build_configargs)
AC_SUBST(stage1_cflags)
# It makes debugging easier if we create as symlinks the stage directories
-# gcc for stageN-gcc and stage-prev for stage(N-1). In case this is not
+# gcc for stageN-gcc and stagePREV-gcc for stage(N-1). In case this is not
# possible, however, we can resort to mv.
AC_CACHE_CHECK([if symbolic links between directories work],
[gcc_cv_prog_ln_s_dir],
&& rm -f confdir.s2; then
gcc_cv_prog_ln_s_dir=yes
else
- gcc_cv_prog_ln_s_dir=yes
+ gcc_cv_prog_ln_s_dir=no
fi
rm -rf confdir.s1 confdir.s2])
OSDN Git Service
