# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-# 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
-# Inc.
+# 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
+# Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
m4_include(config/acx.m4)
m4_include(config/override.m4)
m4_include(config/proginstall.m4)
+m4_include(config/elf.m4)
+m4_include([libtool.m4])
+m4_include([ltoptions.m4])
+m4_include([ltsugar.m4])
+m4_include([ltversion.m4])
+m4_include([lt~obsolete.m4])
AC_INIT(move-if-change)
AC_PREREQ(2.64)
# these libraries are used by various programs built for the host environment
#
-host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr mpc ppl cloog libiconv"
+host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr mpc ppl cloog libelf libiconv"
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
# know that we are building the simulator.
# binutils, gas and ld appear in that order because it makes sense to run
# "make check" in that particular order.
-# If --enable-gold is used, "gold" will replace "ld".
+# If --enable-gold is used, "gold" may replace "ld".
host_tools="texinfo byacc flex bison binutils gas ld fixincludes gcc cgen sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar gnattools"
# libgcj represents the runtime libraries only used by gcj.
# Find the build and target subdir names.
GCC_TOPLEV_SUBDIRS
+# Be sure to cover against remnants of an in-tree build.
+if test $srcdir != . && test -d $srcdir/host-${host_noncanonical}; then
+ AC_MSG_ERROR([building out of tree but $srcdir contains host-${host_noncanonical}.
+Use a pristine source tree when building in a separate tree])
+fi
# Skipdirs are removed silently.
skipdirs=
noconfigdirs="$noconfigdirs gas"
fi
+use_included_zlib=
+# Make sure we don't let ZLIB be added if we didn't want it.
+if test x$with_system_zlib = xyes ; then
+ use_included_zlib=no
+ noconfigdirs="$noconfigdirs zlib"
+fi
+
# some tools are so dependent upon X11 that if we're not building with X,
# it's not even worth trying to configure, much less build, that tool.
esac
# Handle --enable-gold.
+# --enable-gold Build only gold
+# --disable-gold [default] Build only ld
+# --enable-gold=both Build both gold and ld, ld is default
+# --enable-gold=both/ld Same
+# --enable-gold=both/gold Build both gold and ld, gold is default, ld is renamed ld.bfd
AC_ARG_ENABLE(gold,
-[ --enable-gold use gold instead of ld],
+[[ --enable-gold[=ARG] build gold [ARG={both}[/{gold,ld}]]]],
ENABLE_GOLD=$enableval,
ENABLE_GOLD=no)
-if test "${ENABLE_GOLD}" = "yes"; then
- # Check for ELF target.
- is_elf=no
- case "${target}" in
- *-*-elf* | *-*-sysv4* | *-*-unixware* | *-*-eabi* | hppa*64*-*-hpux* \
- | *-*-linux* | frv-*-uclinux* | *-*-irix5* | *-*-irix6* \
- | *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-solaris2* | *-*-nto*)
+ case "${ENABLE_GOLD}" in
+ yes|both|both/gold|both/ld)
+ # Check for ELF target.
+ is_elf=no
+ case "${target}" in
+ *-*-elf* | *-*-sysv4* | *-*-unixware* | *-*-eabi* | hppa*64*-*-hpux* \
+ | *-*-linux* | frv-*-uclinux* | *-*-irix5* | *-*-irix6* \
+ | *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-solaris2* | *-*-nto*)
+ case "${target}" in
+ *-*-linux*aout* | *-*-linux*oldld*)
+ ;;
+ *)
+ is_elf=yes
+ ;;
+ esac
+ esac
+
+ if test "$is_elf" = "yes"; then
+ # Check for target supported by gold.
case "${target}" in
- *-*-linux*aout* | *-*-linux*oldld*)
- ;;
- *)
- is_elf=yes
+ i?86-*-* | x86_64-*-* | sparc*-*-* | powerpc*-*-* | arm*-*-*)
+ case "${ENABLE_GOLD}" in
+ both*)
+ configdirs="$configdirs gold"
+ ;;
+ *)
+ configdirs="`echo " ${configdirs} " | sed -e 's/ ld / gold /'`"
+ ;;
+ esac
+ ENABLE_GOLD=yes
;;
esac
+ fi
+ ;;
+ no)
+ ;;
+ *)
+ AC_MSG_ERROR([invalid --enable-gold argument])
+ ;;
esac
- if test "$is_elf" = "yes"; then
- # Check for target supported by gold.
- case "${target}" in
- i?86-*-* | x86_64-*-* | sparc*-*-* | powerpc*-*-* | arm*-*-*)
- configdirs="`echo " ${configdirs} " | sed -e 's/ ld / gold /'`"
- ;;
- esac
- fi
-fi
-
# Configure extra directories which are host specific
case "${host}" in
case "${target}" in
i*86-*-*) ;;
alpha*-*-*) ;;
+ x86_64-*-*) ;;
*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss ${libgcj} target-libmudflap"
;;
*-*-rtems*)
+ skipdirs="${skipdirs} target-libiberty"
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
# The tpf target doesn't support gdb yet.
noconfigdirs="$noconfigdirs gas ld fileutils target-newlib target-libgloss"
;;
alpha*-*-*vms*)
- noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
;;
alpha*-*-linux*)
# newlib is not 64 bit ready
# if the --with-newlib option has been given, because otherwise
# 'target-newlib' will appear in skipdirs.
;;
- i[[3456789]]86-*-mingw32*)
+ i[[3456789]]86-w64-mingw*)
+ noconfigdirs="$noconfigdirs expect target-libgloss target-newlib ${libgcj}"
+ ;;
+ i[[3456789]]86-*-mingw*)
target_configdirs="$target_configdirs target-winsup"
noconfigdirs="$noconfigdirs expect target-libgloss target-newlib ${libgcj}"
- ;;
+ ;;
x86_64-*-mingw*)
- target_configdirs="$target_configdirs target-winsup"
noconfigdirs="$noconfigdirs expect target-libgloss target-newlib ${libgcj}"
- ;;
+ ;;
*-*-cygwin*)
target_configdirs="$target_configdirs target-libtermcap target-winsup"
noconfigdirs="$noconfigdirs target-gperf target-libgloss"
elif test -d "$srcdir/newlib"; then
echo "Warning: winsup/cygwin is missing so newlib can't be built."
fi
- ;;
+ ;;
i[[3456789]]86-moss-msdos | i[[3456789]]86-*-moss* | \
i[[3456789]]86-*-uwin* | i[[3456789]]86-*-interix* )
;;
;;
sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
;;
+ tic6x-*-*)
+ noconfigdirs="$noconfigdirs gdb sim ${libgcj}"
+ ;;
v810-*-*)
noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libstdc++-v3 opcodes target-libgloss ${libgcj}"
;;
ENABLE_BUILD_WITH_CXX=$enableval,
ENABLE_BUILD_WITH_CXX=no)
+# Used for setting $lt_cv_objdir
+_LT_CHECK_OBJDIR
+
# Check for GMP, MPFR and MPC
-gmplibs="-lmpfr -lgmp"
+gmplibs="-lmpc -lmpfr -lgmp"
gmpinc=
have_gmp=no
-mpclibs=-lmpc
-mpcinc=
-have_mpc=no
# Specify a location for mpc
# check for this first so it ends up on the link line before mpfr.
AC_ARG_WITH(mpc_lib, [ --with-mpc-lib=PATH specify directory for the installed MPC library])
if test "x$with_mpc" != x; then
- mpclibs="-L$with_mpc/lib -lmpc"
- mpcinc="-I$with_mpc/include $mpcinc"
+ gmplibs="-L$with_mpc/lib $gmplibs"
+ gmpinc="-I$with_mpc/include $gmpinc"
fi
if test "x$with_mpc_include" != x; then
- mpcinc="-I$with_mpc_include $mpcinc"
+ gmpinc="-I$with_mpc_include $gmpinc"
fi
if test "x$with_mpc_lib" != x; then
- mpclibs="-L$with_mpc_lib -lmpc"
+ gmplibs="-L$with_mpc_lib $gmplibs"
fi
if test "x$with_mpc$with_mpc_include$with_mpc_lib" = x && test -d ${srcdir}/mpc; then
- mpclibs='-L$$r/$(HOST_SUBDIR)/mpc/src/.libs -L$$r/$(HOST_SUBDIR)/mpc/src/_libs -lmpc'
- mpcinc='-I$$s/mpc/src '"$mpcinc"
+ gmplibs='-L$$r/$(HOST_SUBDIR)/mpc/src/'"$lt_cv_objdir $gmplibs"
+ gmpinc='-I$$s/mpc/src '"$gmpinc"
# Do not test the mpc version. Assume that it is sufficient, since
# it is in the source tree, and the library has not been built yet
# but it would be included on the link line in the version check below
# hence making the test fail.
- have_mpc=yes
+ have_gmp=yes
fi
# Specify a location for mpfr
if test "x$with_mpfr" != x; then
gmplibs="-L$with_mpfr/lib $gmplibs"
- gmpinc="-I$with_mpfr/include"
+ gmpinc="-I$with_mpfr/include $gmpinc"
fi
if test "x$with_mpfr_include" != x; then
- gmpinc="-I$with_mpfr_include"
+ gmpinc="-I$with_mpfr_include $gmpinc"
fi
if test "x$with_mpfr_lib" != x; then
gmplibs="-L$with_mpfr_lib $gmplibs"
fi
if test "x$with_mpfr$with_mpfr_include$with_mpfr_lib" = x && test -d ${srcdir}/mpfr; then
- gmplibs='-L$$r/$(HOST_SUBDIR)/mpfr/.libs -L$$r/$(HOST_SUBDIR)/mpfr/_libs '"$gmplibs"
+ gmplibs='-L$$r/$(HOST_SUBDIR)/mpfr/'"$lt_cv_objdir $gmplibs"
gmpinc='-I$$r/$(HOST_SUBDIR)/mpfr -I$$s/mpfr '"$gmpinc"
- extra_mpc_mpfr_configure_flags='--with-mpfr-include=$$s/mpfr'
+ extra_mpc_mpfr_configure_flags='--with-mpfr-include=$$s/mpfr --with-mpfr-lib=$$r/$(HOST_SUBDIR)/mpfr/'"$lt_cv_objdir"
# Do not test the mpfr version. Assume that it is sufficient, since
# it is in the source tree, and the library has not been built yet
# but it would be included on the link line in the version check below
gmplibs="-L$with_gmp_lib $gmplibs"
fi
if test "x$with_gmp$with_gmp_include$with_gmp_lib" = x && test -d ${srcdir}/gmp; then
- gmplibs='-L$$r/$(HOST_SUBDIR)/gmp/.libs -L$$r/$(HOST_SUBDIR)/gmp/_libs '"$gmplibs"
+ gmplibs='-L$$r/$(HOST_SUBDIR)/gmp/'"$lt_cv_objdir $gmplibs"
gmpinc='-I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp '"$gmpinc"
extra_mpfr_configure_flags='--with-gmp-build=$$r/$(HOST_SUBDIR)/gmp'
- extra_mpc_gmp_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp'
+ extra_mpc_gmp_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/'"$lt_cv_objdir"
# Do not test the gmp version. Assume that it is sufficient, since
# it is in the source tree, and the library has not been built yet
# but it would be included on the link line in the version check below
have_gmp=yes
saved_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $gmpinc"
- # Check GMP actually works
- AC_MSG_CHECKING([for correct version of gmp.h])
+ # Check for the recommended and required versions of GMP.
+ AC_MSG_CHECKING([for the correct version of gmp.h])
AC_TRY_COMPILE([#include "gmp.h"],[
- #if __GNU_MP_VERSION < 4 || (__GNU_MP_VERSION == 4 && __GNU_MP_VERSION_MINOR < 2)
+ #define GCC_GMP_VERSION_NUM(a,b,c) (((a) << 16L) | ((b) << 8) | (c))
+ #define GCC_GMP_VERSION GCC_GMP_VERSION_NUM(__GNU_MP_VERSION,__GNU_MP_VERSION_MINOR,__GNU_MP_VERSION_PATCHLEVEL)
+ #if GCC_GMP_VERSION < GCC_GMP_VERSION_NUM(4,2,0)
choke me
#endif
- ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); have_gmp=no])
+ ], [AC_TRY_COMPILE([#include <gmp.h>],[
+ #define GCC_GMP_VERSION_NUM(a,b,c) (((a) << 16L) | ((b) << 8) | (c))
+ #define GCC_GMP_VERSION GCC_GMP_VERSION_NUM(__GNU_MP_VERSION,__GNU_MP_VERSION_MINOR,__GNU_MP_VERSION_PATCHLEVEL)
+ #if GCC_GMP_VERSION < GCC_GMP_VERSION_NUM(4,3,2)
+ choke me
+ #endif
+ ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([buggy but acceptable])])],
+ [AC_MSG_RESULT([no]); have_gmp=no])
# If we have GMP, check the MPFR version.
if test x"$have_gmp" = xyes; then
- dnl MPFR 2.3.1 is acceptable, but MPFR 2.3.2 is better.
- AC_MSG_CHECKING([for correct version of mpfr.h])
+ # Check for the recommended and required versions of MPFR.
+ AC_MSG_CHECKING([for the correct version of mpfr.h])
AC_TRY_COMPILE([#include <gmp.h>
#include <mpfr.h>],[
#if MPFR_VERSION < MPFR_VERSION_NUM(2,3,1)
choke me
#endif
- ], AC_TRY_COMPILE([#include <gmp.h>
+ ], [AC_TRY_COMPILE([#include <gmp.h>
#include <mpfr.h>],[
- #if MPFR_VERSION < MPFR_VERSION_NUM(2,3,2)
+ #if MPFR_VERSION < MPFR_VERSION_NUM(2,4,2)
choke me
#endif
- ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([buggy but acceptable])]),
+ ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([buggy but acceptable])])],
[AC_MSG_RESULT([no]); have_gmp=no])
fi
# Check for the MPC header version.
- if test x"$have_mpc" != xyes ; then
- CFLAGS="$CFLAGS $mpcinc"
+ if test x"$have_gmp" = xyes ; then
+ # Check for the recommended and required versions of MPC.
AC_MSG_CHECKING([for the correct version of mpc.h])
AC_TRY_COMPILE([#include <mpc.h>],[
- #if MPC_VERSION < MPC_VERSION_NUM (0,6,0)
+ #if MPC_VERSION < MPC_VERSION_NUM(0,8,0)
+ choke me
+ #endif
+ ], [AC_TRY_COMPILE([#include <mpc.h>],[
+ #if MPC_VERSION < MPC_VERSION_NUM(0,8,1)
choke me
#endif
- ], [AC_MSG_RESULT([yes]); have_mpc=maybe],
- [AC_MSG_RESULT([no]); have_mpc=no; mpclibs= ; mpcinc= ])
+ ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([buggy but acceptable])])],
+ [AC_MSG_RESULT([no]); have_gmp=no])
fi
# Now check the MPFR library.
if test x"$have_gmp" = xyes; then
saved_LIBS="$LIBS"
LIBS="$LIBS $gmplibs"
- AC_MSG_CHECKING([for the correct version of the gmp/mpfr libraries])
- AC_TRY_LINK([#include <gmp.h>
- #include <mpfr.h>],[
+ AC_MSG_CHECKING([for the correct version of the gmp/mpfr/mpc libraries])
+ AC_TRY_LINK([#include <mpc.h>],[
mpfr_t n;
mpfr_t x;
+ mpc_t c;
int t;
mpfr_init (n);
mpfr_init (x);
mpfr_atan2 (n, n, x, GMP_RNDN);
mpfr_erfc (n, x, GMP_RNDN);
mpfr_subnormalize (x, t, GMP_RNDN);
+ mpfr_clear(n);
+ mpfr_clear(x);
+ mpc_init2 (c, 53);
+ mpc_set_ui_ui (c, 1, 1, MPC_RNDNN);
+ mpc_cosh (c, c, MPC_RNDNN);
+ mpc_pow (c, c, c, MPC_RNDNN);
+ mpc_acosh (c, c, MPC_RNDNN);
+ mpc_clear (c);
], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); have_gmp=no])
LIBS="$saved_LIBS"
fi
- if test x"$have_mpc" = xmaybe; then
- saved_LIBS="$LIBS"
- LIBS="$LIBS $mpclibs $gmplibs"
- AC_MSG_CHECKING([for the correct version of the mpc library])
- AC_TRY_LINK([#include <mpc.h>],[
- mpc_t n;
- mpc_init2 (n, 53);
- mpc_set_ui_ui (n, 1, 1, MPC_RNDNN);
- mpc_sin (n, n, MPC_RNDNN);
- mpc_cos (n, n, MPC_RNDNN);
- mpc_tan (n, n, MPC_RNDNN);
- mpc_sinh (n, n, MPC_RNDNN);
- mpc_cosh (n, n, MPC_RNDNN);
- mpc_tanh (n, n, MPC_RNDNN);
- mpc_exp (n, n, MPC_RNDNN);
- mpc_log (n, n, MPC_RNDNN);
- mpc_sqrt (n, n, MPC_RNDNN);
- mpc_proj (n, n, MPC_RNDNN);
- mpc_neg (n, n, MPC_RNDNN);
- mpc_sqr (n, n, MPC_RNDNN);
- mpc_clear (n);
- ], [AC_MSG_RESULT([yes]); have_mpc=yes],
- [AC_MSG_RESULT([no]); have_mpc=no; mpclibs= ; mpcinc= ])
- LIBS="$saved_LIBS"
- fi
-
CFLAGS="$saved_CFLAGS"
+# The library versions listed in the error message below should match
+# the HARD-minimums enforced above.
if test x$have_gmp != xyes; then
- AC_MSG_ERROR([Building GCC requires GMP 4.2+ and MPFR 2.3.2+.
-Try the --with-gmp and/or --with-mpfr options to specify their locations.
-Copies of these libraries' source code can be found at their respective
-hosting sites as well as at ftp://gcc.gnu.org/pub/gcc/infrastructure/.
-See also http://gcc.gnu.org/install/prerequisites.html for additional info.
-If you obtained GMP and/or MPFR from a vendor distribution package, make
-sure that you have installed both the libraries and the header files.
-They may be located in separate packages.])
+ AC_MSG_ERROR([Building GCC requires GMP 4.2+, MPFR 2.3.1+ and MPC 0.8.0+.
+Try the --with-gmp, --with-mpfr and/or --with-mpc options to specify
+their locations. Source code for these libraries can be found at
+their respective hosting sites as well as at
+ftp://gcc.gnu.org/pub/gcc/infrastructure/. See also
+http://gcc.gnu.org/install/prerequisites.html for additional info. If
+you obtained GMP, MPFR and/or MPC from a vendor distribution package,
+make sure that you have installed both the libraries and the header
+files. They may be located in separate packages.])
fi
fi
-if test x$have_mpc != xyes ; then
- mpcinc=
- mpclibs=
-fi
-
-gmpinc="$mpcinc $gmpinc"
-gmplibs="$mpclibs $gmplibs"
-
# Flags needed for both GMP, MPFR and/or MPC.
AC_SUBST(gmplibs)
AC_SUBST(gmpinc)
[stage1_libs=$with_host_libstdcxx])
AC_SUBST(stage1_libs)
-# Linker flags to use for stage2 and later builds.
-AC_ARG_WITH(boot-ldflags,
-[ --with-boot-ldflags=FLAGS Linker flags for stage2 and later],
-[if test "$withval" = "no" -o "$withval" = "yes"; then
- poststage1_ldflags=
- else
- poststage1_ldflags=$withval
- fi],
-[if test "$ENABLE_BUILD_WITH_CXX" = "yes"; then
- poststage1_ldflags=-static-libstdc++
- else
- poststage1_ldflags=
- fi])
-AC_SUBST(poststage1_ldflags)
-
# Libraries to use for stage2 and later builds. This defaults to the
# argument passed to --with-host-libstdcxx.
AC_ARG_WITH(boot-libs,
[poststage1_libs=$with_host_libstdcxx])
AC_SUBST(poststage1_libs)
+# Linker flags to use for stage2 and later builds.
+AC_ARG_WITH(boot-ldflags,
+[ --with-boot-ldflags=FLAGS Linker flags for stage2 and later],
+[if test "$withval" = "no" -o "$withval" = "yes"; then
+ poststage1_ldflags=
+ else
+ poststage1_ldflags=$withval
+ fi],
+[poststage1_ldflags=
+ # With --enable-build-with-cxx, default to linking libstdc++ and
+ # libgcc statically. But if the user explicitly specified the
+ # libraries to use, trust that they are doing what they want.
+ if test "$ENABLE_BUILD_WITH_CXX" = "yes" -a "$poststage1_libs" = ""; then
+ poststage1_ldflags="-static-libstdc++ -static-libgcc"
+ fi])
+AC_SUBST(poststage1_ldflags)
+
# Check for PPL
-ppl_major_version=0
-ppl_minor_version=10
ppllibs=" -lppl_c -lppl -lgmpxx"
pplinc=
AC_ARG_WITH(ppl, [ --with-ppl=PATH Specify prefix directory for the installed PPL package
Equivalent to --with-ppl-include=PATH/include
- plus --with-ppl-lib=PATH/lib],, with_ppl=no)
+ plus --with-ppl-lib=PATH/lib])
AC_ARG_WITH(ppl_include, [ --with-ppl-include=PATH Specify directory for installed PPL include files])
AC_ARG_WITH(ppl_lib, [ --with-ppl-lib=PATH Specify the directory for the installed PPL library])
no)
ppllibs=
;;
+ "" | yes)
+ ;;
*)
ppllibs="-L$with_ppl/lib -lppl_c -lppl -lgmpxx"
pplinc="-I$with_ppl/include $pplinc"
- LIBS="$ppllibs $LIBS"
;;
esac
if test "x$with_ppl_include" != x; then
fi
if test "x$with_ppl_lib" != x; then
ppllibs="-L$with_ppl_lib -lppl_c -lppl -lgmpxx"
- LIBS="$ppllibs $LIBS"
fi
if test "x$with_ppl$with_ppl_include$with_ppl_lib" = x && test -d ${srcdir}/ppl; then
- ppllibs='-L$$r/$(HOST_SUBDIR)/ppl/.libs -L$$r/$(HOST_SUBDIR)/ppl/_libs -lppl_c -lppl -lgmpxx '
- pplinc='-I$$r/$(HOST_SUBDIR)/ppl/include -I$$s/ppl/include '
- LIBS="$ppllibs $LIBS"
+ ppllibs='-L$$r/$(HOST_SUBDIR)/ppl/interfaces/C/'"$lt_cv_objdir"' -L$$r/$(HOST_SUBDIR)/ppl/src/'"$lt_cv_objdir"' -lppl_c -lppl -lgmpxx '
+ pplinc='-I$$r/$(HOST_SUBDIR)/ppl/src -I$$r/$(HOST_SUBDIR)/ppl/interfaces/C '
+ enable_ppl_version_check=no
fi
AC_ARG_ENABLE(ppl-version-check,
ENABLE_PPL_CHECK=$enableval,
ENABLE_PPL_CHECK=yes)
-if test "${ENABLE_PPL_CHECK}" = "yes"; then
+if test "x$with_ppl" != "xno" -a "${ENABLE_PPL_CHECK}" = "yes"; then
saved_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $pplinc $gmpinc"
- AC_MSG_CHECKING([for version $ppl_major_version.$ppl_minor_version of PPL])
+ AC_MSG_CHECKING([for version 0.10 (or later revision) of PPL])
AC_TRY_COMPILE([#include "ppl_c.h"],[
- #if PPL_VERSION_MAJOR != $ppl_major_version || PPL_VERSION_MINOR != $ppl_minor_version
+ #if PPL_VERSION_MAJOR != 0 || PPL_VERSION_MINOR < 10
choke me
#endif
- ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); ppllibs= ; pplinc= ])
+ ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); ppllibs= ; pplinc= ; with_ppl=no ])
CFLAGS="$saved_CFLAGS"
fi
AC_ARG_WITH(cloog, [ --with-cloog=PATH Specify prefix directory for the installed CLooG-PPL package
Equivalent to --with-cloog-include=PATH/include
- plus --with-cloog-lib=PATH/lib],, with_cloog=no)
+ plus --with-cloog-lib=PATH/lib])
AC_ARG_WITH(cloog_include, [ --with-cloog-include=PATH Specify directory for installed CLooG include files])
AC_ARG_WITH(cloog_lib, [ --with-cloog-lib=PATH Specify the directory for the installed CLooG library])
+if test "x$with_ppl" = "xno"; then
+ with_cloog=no
+fi
+
case $with_cloog in
no)
clooglibs=
clooginc=
;;
+ "" | yes)
+ ;;
*)
clooglibs="-L$with_cloog/lib -lcloog"
clooginc="-I$with_cloog/include -DCLOOG_PPL_BACKEND "
- LIBS="$clooglibs $LIBS"
;;
esac
if test "x$with_cloog_include" != x; then
fi
if test "x$with_cloog_lib" != x; then
clooglibs="-L$with_cloog_lib -lcloog"
- LIBS="$clooglibs $LIBS"
fi
if test "x$with_cloog$with_cloog_include$with_cloog_lib" = x && test -d ${srcdir}/cloog; then
- clooglibs='-L$$r/$(HOST_SUBDIR)/cloog/.libs -L$$r/$(HOST_SUBDIR)/cloog/_libs -lcloog '
+ clooglibs='-L$$r/$(HOST_SUBDIR)/cloog/'"$lt_cv_objdir"' -lcloog '
clooginc='-I$$r/$(HOST_SUBDIR)/cloog/include -I$$s/cloog/include -DCLOOG_PPL_BACKEND '
- LIBS="$clooglibs $LIBS"
+ enable_cloog_version_check=no
fi
AC_ARG_ENABLE(cloog-version-check,
ENABLE_CLOOG_CHECK=$enableval,
ENABLE_CLOOG_CHECK=yes)
-if test "${ENABLE_CLOOG_CHECK}" = "yes"; then
+if test "x$with_cloog" != "xno" -a "${ENABLE_CLOOG_CHECK}" = "yes"; then
saved_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $clooginc $gmpinc $pplinc"
- AC_MSG_CHECKING([for correct version of CLooG])
+ AC_MSG_CHECKING([for version 0.15.5 (or later revision) of CLooG])
AC_TRY_COMPILE([#include "cloog/cloog.h"],[
- #if CLOOG_VERSION_MAJOR != 0 || CLOOG_VERSION_MINOR != 15
+ #if CLOOG_VERSION_MAJOR != 0 || CLOOG_VERSION_MINOR != 15 || CLOOG_VERSION_REVISION < 5
choke me
#endif
- ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); clooglibs= ; clooginc= ])
+ ], [AC_TRY_COMPILE([#include "cloog/cloog.h"],[
+ #if CLOOG_VERSION_MAJOR != 0 || CLOOG_VERSION_MINOR != 15 || CLOOG_VERSION_REVISION < 9
+ choke me
+ #endif
+ ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([buggy but acceptable])])],
+ [AC_MSG_RESULT([no]); clooglibs= ; clooginc= ])
CFLAGS="$saved_CFLAGS"
fi
AC_SUBST(clooglibs)
AC_SUBST(clooginc)
+# Check for LTO support.
+AC_ARG_ENABLE(lto,
+[ --enable-lto enable link time optimization support],
+enable_lto=$enableval,
+enable_lto=yes; default_enable_lto=yes)
+
+
+ACX_ELF_TARGET_IFELSE([if test x"$enable_lto" = x"yes" ; then
+ # Make sure that libelf.h and gelf.h are available.
+ AC_ARG_WITH(libelf, [ --with-libelf=PATH Specify prefix directory for the installed libelf package
+ Equivalent to --with-libelf-include=PATH/include
+ plus --with-libelf-lib=PATH/lib])
+
+ AC_ARG_WITH(libelf_include, [ --with-libelf-include=PATH Specify directory for installed libelf include files])
+
+ AC_ARG_WITH(libelf_lib, [ --with-libelf-lib=PATH Specify the directory for the installed libelf library])
+
+ saved_CFLAGS="$CFLAGS"
+ saved_CPPFLAGS="$CPPFLAGS"
+ saved_LIBS="$LIBS"
+
+ case $with_libelf in
+ "")
+ libelflibs="-lelf"
+ libelfinc="-I/usr/include/libelf"
+ ;;
+ *)
+ libelflibs="-L$with_libelf/lib -lelf"
+ libelfinc="-I$with_libelf/include -I$with_libelf/include/libelf"
+ LIBS="$libelflibs $LIBS"
+ ;;
+ esac
+
+ if test "x$with_libelf_include" != x; then
+ libelfinc="-I$with_libelf_include"
+ fi
+
+ if test "x$with_libelf_lib" != x; then
+ libelflibs="-L$with_libelf_lib -lelf"
+ LIBS="$libelflibs $LIBS"
+ fi
+
+ if test "x$with_libelf$with_libelf_include$with_libelf_lib" = x \
+ && test -d ${srcdir}/libelf; then
+ libelflibs='-L$$r/$(HOST_SUBDIR)/libelf/lib -lelf '
+ libelfinc='-D__LIBELF_INTERNAL__ -I$$r/$(HOST_SUBDIR)/libelf/lib -I$$s/libelf/lib'
+ LIBS="$libelflibs $LIBS"
+
+ else
+
+ CFLAGS="$CFLAGS $libelfinc"
+ CPPFLAGS="$CPPFLAGS $libelfinc"
+ LIBS="$LIBS $libelflibs"
+
+ AC_CHECK_HEADERS(libelf.h, [have_libelf_h=yes])
+ AC_CHECK_HEADERS(gelf.h, [have_gelf_h=yes])
+
+ AC_CHECK_HEADERS(libelf/libelf.h, [have_libelf_libelf_h=yes])
+ AC_CHECK_HEADERS(libelf/gelf.h, [have_libelf_gelf_h=yes])
+
+ # If we couldn't find libelf.h and the user forced it, emit an error.
+ if test x"$have_libelf_h" != x"yes" \
+ && test x"$have_libelf_libelf_h" != x"yes" ; then
+ if test x"$default_enable_lto" != x"yes" ; then
+ AC_MSG_ERROR([LTO support requires libelf.h or libelf/libelf.h.])
+ else
+ enable_lto=no
+ libelflibs=
+ libelfinc=
+ fi
+ fi
+
+ # If we couldn't find gelf.h and the user forced it, emit an error.
+ if test x"$have_gelf_h" != x"yes" \
+ && test x"$have_libelf_gelf_h" != x"yes" ; then
+ if test x"$default_enable_lto" != x"yes" ; then
+ AC_MSG_ERROR([LTO support requires gelf.h or libelf/gelf.h.])
+ else
+ enable_lto=no
+ libelflibs=
+ libelfinc=
+ fi
+ fi
+
+ # Check that the detected libelf has the functions we need. We cannot
+ # rely on just detecting the headers since they do not include
+ # versioning information. Add functions, if needed.
+ if test x"$enable_lto" = x"yes" ; then
+ AC_MSG_CHECKING([for the correct version of libelf])
+ AC_TRY_LINK(
+ [#include <libelf.h>],[
+ elf_errmsg (0);
+ elf_getscn (0, 0);
+ elf_nextscn (0, 0);
+ elf_strptr (0, 0, 0);
+ elf_getident (0, 0);
+ elf_begin (0, 0, 0);
+ elf_ndxscn (0);
+ elf_end (0);
+ ],
+ [AC_MSG_RESULT([yes]);],
+ [AC_MSG_RESULT([no]); enable_lto=no; libelflibs= ; libelfinc= ]
+ )
+
+ # Check for elf_getshdrstrndx or elf_getshstrndx. The latter's flavor
+ # is determined in gcc/configure.ac.
+ if test x"$enable_lto" = x"yes" ; then
+ AC_MSG_CHECKING([for elf_getshdrstrndx])
+ AC_TRY_LINK(
+ [#include <libelf.h>],[
+ elf_getshdrstrndx (0, 0);
+ ],
+ [AC_MSG_RESULT([yes]);],
+ [AC_MSG_RESULT([no]);
+ AC_MSG_CHECKING([for elf_getshstrndx])
+ AC_TRY_LINK(
+ [#include <libelf.h>],[
+ elf_getshstrndx (0, 0);
+ ],
+ [AC_MSG_RESULT([yes]);],
+ [AC_MSG_RESULT([no]); enable_lto=no; libelflibs= ; libelfinc= ]
+ )]
+ )
+ fi
+
+ # If we couldn't enable LTO and the user forced it, emit an error.
+ if test x"$enable_lto" = x"no" \
+ && test x"$default_enable_lto" != x"yes" ; then
+ AC_MSG_ERROR([To enable LTO, GCC requires libelf v0.8.12+.
+Try the --with-libelf, --with-libelf-include and --with-libelf-lib options
+to specify its location.])
+ fi
+ fi
+
+ CFLAGS="$saved_CFLAGS"
+ CPPFLAGS="$saved_CPPFLAGS"
+ LIBS="$saved_LIBS"
+
+ fi
+
+ # Flags needed for libelf.
+ AC_SUBST(libelflibs)
+ AC_SUBST(libelfinc)
+fi],[if test x"$default_enable_lto" = x"yes" ; then
+ # On non-ELF platforms, LTO must be explicitly enabled.
+ enable_lto=no
+ else
+ # Apart from ELF platforms, only Windows supports LTO so far. It
+ # would also be nice to check the binutils support, but we don't
+ # have gcc_GAS_CHECK_FEATURE available here. For now, we'll just
+ # warn during gcc/ subconfigure; unless you're bootstrapping with
+ # -flto it won't be needed until after installation anyway.
+ case $target in
+ *-cygwin*|*-mingw*) ;;
+ *-apple-darwin*) ;;
+ *) if test x"$enable_lto" = x"yes"; then
+ AC_MSG_ERROR([LTO support is not enabled for this target.])
+ fi
+ ;;
+ esac
+ fi
+ default_enable_lto=no])
+
# By default, C is the only stage 1 language.
stage1_languages=,c,
done
new_enable_languages=,c,
+
+ # If LTO is enabled, add the LTO front end.
+ extra_host_libiberty_configure_flags=
+ if test "$enable_lto" = "yes" ; then
+ case ,${enable_languages}, in
+ *,lto,*) ;;
+ *) enable_languages="${enable_languages},lto" ;;
+ esac
+ if test "${ENABLE_GOLD}" = "yes" ; then
+ configdirs="$configdirs lto-plugin"
+ extra_host_libiberty_configure_flags=--enable-shared
+ fi
+ fi
+ AC_SUBST(extra_host_libiberty_configure_flags)
+
missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ `
potential_languages=,c,
exit 1
fi
- if test "$language" = "c++" -a "$ENABLE_BUILD_WITH_CXX" = "yes"; then
+ if test "$language" = "c++" \
+ && test "$ENABLE_BUILD_WITH_CXX" = "yes"; then
boot_language=yes
fi
new_enable_languages="${new_enable_languages}${language},"
potential_languages="${potential_languages}${language},"
missing_languages=`echo "$missing_languages" | sed "s/,$language,/,/"`
- case ${boot_language} in
- yes)
+ case "${boot_language}:,$enable_stage1_languages," in
+ yes:* | *:*,$language,* | *:*,yes, | *:*,all,)
# Add to (comma-separated) list of stage 1 languages.
- stage1_languages="${stage1_languages}${language},"
+ case ",$stage1_languages," in
+ *,$language,* | ,yes, | ,all,) ;;
+ *) stage1_languages="${stage1_languages}${language}," ;;
+ esac
# We need to bootstrap any supporting libraries.
bootstrap_target_libs="${bootstrap_target_libs}${target_libs},"
;;
fi
fi
-# Set with_gnu_as and with_gnu_ld as appropriate.
+# Set with_gnu_as, with_gnu_ld, and with_system_zlib as appropriate.
#
# This is done by determining whether or not the appropriate directory
# is available, and by checking whether or not specific configurations
#
# If the default for a toolchain is to use GNU as and ld, and you don't
# want to do that, then you should use the --without-gnu-as and
-# --without-gnu-ld options for the configure script.
+# --without-gnu-ld options for the configure script. Similarly, if
+# the default is to use the included zlib and you don't want to do that,
+# you should use the --with-system-zlib option for the configure script.
if test x${use_gnu_as} = x &&
echo " ${configdirs} " | grep " gas " > /dev/null 2>&1 ; then
extra_host_args="$extra_host_args --with-gnu-ld"
fi
+if test x${use_included_zlib} = x &&
+ echo " ${configdirs} " | grep " zlib " > /dev/null 2>&1 ; then
+ :
+else
+ with_system_zlib=yes
+ extra_host_args="$extra_host_args --with-system-zlib"
+fi
+
# If using newlib, add --with-newlib to the extra_host_args so that gcc/configure
# can detect this case.
extra_arflags_for_target=" -X32_64"
extra_nmflags_for_target=" -B -X32_64"
;;
- *-*-darwin*)
- # ranlib from Darwin requires the -c flag to look at common symbols.
+ *-*-darwin[[3-9]]*)
+ # ranlib before Darwin10 requires the -c flag to look at common symbols.
extra_ranlibflags_for_target=" -c"
;;
mips*-*-pe | sh*-*-pe | *arm-wince-pe)
target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
build_configdirs=`echo "${build_configdirs}" | sed -e 's/build-//g'`
+# If we are building libgomp, bootstrap it.
+if echo " ${target_configdirs} " | grep " libgomp " > /dev/null 2>&1 ; then
+ bootstrap_target_libs=${bootstrap_target_libs}target-libgomp,
+fi
+
# Determine whether gdb needs tk/tcl or not.
# Use 'maybe' since enable_gdbtk might be true even if tk isn't available
# and in that case we want gdb to be built without tk. Ugh!
;;
esac
+case "$enable_bootstrap:$ENABLE_GOLD: $configdirs :,$stage1_languages," in
+ yes:yes:*\ gold\ *:*,c++,*) ;;
+ yes:yes:*\ gold\ *:*)
+ AC_MSG_ERROR([in a combined tree, bootstrapping with --enable-gold requires c++ in stage1_languages])
+ ;;
+esac
+
# Adjust the toplevel makefile according to whether bootstrap was selected.
case $enable_bootstrap in
yes)
mv conftest.o conftest.o.g0 &&
${CC} -c -g conftest.c &&
mv conftest.o conftest.o.g &&
- ${srcdir}/contrib/compare-debug conftest.o.g0 conftest.o.g; then
+ ${srcdir}/contrib/compare-debug conftest.o.g0 conftest.o.g > /dev/null 2>&1; then
:
else
BUILD_CONFIG=
# Base args. Strip norecursion, cache-file, srcdir, host, build,
# target, nonopt, and variable assignments. These are the ones we
-# might not want to pass down to subconfigures. Also strip
-# program-prefix, program-suffix, and program-transform-name, so that
-# we can pass down a consistent program-transform-name.
+# might not want to pass down to subconfigures. The exception being
+# --cache-file=/dev/null, which is used to turn off the use of cache
+# files altogether, and which should be passed on to subconfigures.
+# Also strip program-prefix, program-suffix, and program-transform-name,
+# so that we can pass down a consistent program-transform-name.
baseargs=
keep_next=no
skip_next=no
esac
case "$ac_arg" in
+ --cache-file=/dev/null | \
+ -cache-file=/dev/null )
+ # Handled here to avoid the test to skip args below.
+ baseargs="$baseargs '$ac_arg'"
+ # Assert: $separate_arg should always be no.
+ keep_next=$separate_arg
+ ;;
--no*)
continue
;;
case " $target_configargs " in
*" --with-newlib "*)
case "$target" in
- *-cygwin*)
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include' ;;
+ *-cygwin*)
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include'
+ ;;
esac
# If we're not building GCC, don't discard standard headers.
esac
;;
esac
+
case "$target" in
-*-mingw*)
- # Can't be handled as Cygwin above since Mingw does not use newlib.
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup/mingw -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/mingw/include -isystem $$s/winsup/w32api/include' ;;
+ x86_64-*mingw* | *-w64-mingw*)
+ # MinGW-w64 does not use newlib, nor does it use winsup. It may,
+ # however, use a symlink named 'mingw' in ${prefix} .
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L${prefix}/${target}/lib -L${prefix}/mingw/lib -isystem ${prefix}/${target}/include -isystem ${prefix}/mingw/include'
+ ;;
+ *-mingw*)
+ # MinGW can't be handled as Cygwin above since it does not use newlib.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup/mingw -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/mingw/include -isystem $$s/winsup/w32api/include'
+ ;;
esac
# Allow the user to override the flags for
# Host module lists & subconfigure args.
AC_SUBST(host_configargs)
AC_SUBST(configdirs)
+AC_SUBST(target_configdirs)
# Target module lists & subconfigure args.
AC_SUBST(target_configargs)
NCN_STRICT_CHECK_TOOLS(LD, ld)
NCN_STRICT_CHECK_TOOLS(LIPO, lipo)
NCN_STRICT_CHECK_TOOLS(NM, nm)
-NCN_STRICT_CHECK_TOOLS(RANLIB, ranlib, :)
-NCN_STRICT_CHECK_TOOLS(STRIP, strip, :)
+NCN_STRICT_CHECK_TOOLS(RANLIB, ranlib, true)
+NCN_STRICT_CHECK_TOOLS(STRIP, strip, true)
NCN_STRICT_CHECK_TOOLS(WINDRES, windres)
NCN_STRICT_CHECK_TOOLS(WINDMC, windmc)
NCN_STRICT_CHECK_TOOLS(OBJCOPY, objcopy)
ACX_CHECK_INSTALLED_TARGET_TOOL(LIPO_FOR_TARGET, lipo)
ACX_CHECK_INSTALLED_TARGET_TOOL(NM_FOR_TARGET, nm)
ACX_CHECK_INSTALLED_TARGET_TOOL(OBJDUMP_FOR_TARGET, objdump)
-ACX_CHECK_INSTALLED_TARGET_TOOL(RANLIB_FOR_TARGET, ranlib, :)
+ACX_CHECK_INSTALLED_TARGET_TOOL(RANLIB_FOR_TARGET, ranlib)
ACX_CHECK_INSTALLED_TARGET_TOOL(STRIP_FOR_TARGET, strip)
ACX_CHECK_INSTALLED_TARGET_TOOL(WINDRES_FOR_TARGET, windres)
ACX_CHECK_INSTALLED_TARGET_TOOL(WINDMC_FOR_TARGET, windmc)
hppa*64*-*-hpux*) ;;
hppa*-*-hpux*) compare_exclusions="gcc/cc*-checksum\$(objext) | */libgcc/lib2funcs* | gcc/ada/*tools/*" ;;
esac
+case " $configdirs " in
+*" ppl "*) compare_exclusions="$compare_exclusions | ppl/src/ppl-config.o" ;;
+esac
AC_SUBST(compare_exclusions)
AC_CONFIG_FILES([Makefile],
OSDN Git Service
