# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-# 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
+# 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
# Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify it
default_ld=
AC_ARG_ENABLE(gold,
-[[ --enable-gold[=ARG] build gold [ARG={default,yes,no}]]],
+[AS_HELP_STRING([[--enable-gold[=ARG]]],
+ [build gold @<:@ARG={default,yes,no}@:>@])],
ENABLE_GOLD=$enableval,
ENABLE_GOLD=no)
case "${ENABLE_GOLD}" in
esac
AC_ARG_ENABLE(ld,
-[[ --enable-ld[=ARG] build ld [ARG={default,yes,no}]]],
+[AS_HELP_STRING([[--enable-ld[=ARG]]],
+ [build ld @<:@ARG={default,yes,no}@:>@])],
ENABLE_LD=$enableval,
ENABLE_LD=yes)
AC_ARG_ENABLE(libada,
-[ --enable-libada build libada directory],
+[AS_HELP_STRING([--enable-libada], [build libada directory])],
ENABLE_LIBADA=$enableval,
ENABLE_LIBADA=yes)
if test "${ENABLE_LIBADA}" != "yes" ; then
fi
AC_ARG_ENABLE(libssp,
-[ --enable-libssp build libssp directory],
+[AS_HELP_STRING([--enable-libssp], [build libssp directory])],
ENABLE_LIBSSP=$enableval,
ENABLE_LIBSSP=yes)
# Make sure we get it printed in the list of not supported target libs.
# Don't disable libffi, though, other languages use it.
noconfigdirs="$noconfigdirs `echo ${libgcj} | sed -e 's/target-libffi//'`"
+ # Clear libgcj_saved so that even if java is enabled libffi won't be
+ # built.
+ libgcj_saved=
;;
esac
;;
bfin-*-*)
unsupported_languages="$unsupported_languages java"
- noconfigdirs="$noconfigdirs target-boehm-gc gdb"
+ noconfigdirs="$noconfigdirs target-boehm-gc"
if test x${is_cross_compiler} != xno ; then
target_configdirs="${target_configdirs} target-bsp target-cygmon"
fi
noconfigdirs="$noconfigdirs readline mmalloc libgui itcl gdb"
;;
ia64*-**-hpux*)
- # No gdb or ld support yet.
- noconfigdirs="$noconfigdirs ${libgcj} readline mmalloc libgui itcl gdb ld"
+ # No ld support yet.
+ noconfigdirs="$noconfigdirs ${libgcj} libgui itcl ld"
;;
ia64*-*-*vms*)
# No gdb or ld support yet.
mt-*-*)
noconfigdirs="$noconfigdirs sim"
;;
+ picochip-*-*)
+ noconfigdirs="$noconfigdirs target-libiberty"
+ ;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp target-newlib ${libgcj}"
# See if we are building gcc with C++.
AC_ARG_ENABLE(build-with-cxx,
-[ --enable-build-with-cxx build with C++ compiler instead of C compiler],
+[AS_HELP_STRING([--enable-build-with-cxx],
+ [build with C++ compiler instead of C compiler])],
ENABLE_BUILD_WITH_CXX=$enableval,
ENABLE_BUILD_WITH_CXX=no)
# Specify a location for mpc
# check for this first so it ends up on the link line before mpfr.
-AC_ARG_WITH(mpc, [ --with-mpc=PATH specify prefix directory for installed MPC package.
- Equivalent to --with-mpc-include=PATH/include
- plus --with-mpc-lib=PATH/lib])
-AC_ARG_WITH(mpc-include, [ --with-mpc-include=PATH
- specify directory for installed MPC include files])
-AC_ARG_WITH(mpc-lib, [ --with-mpc-lib=PATH specify directory for the installed MPC library])
+AC_ARG_WITH(mpc,
+[AS_HELP_STRING([--with-mpc=PATH],
+ [specify prefix directory for installed MPC package.
+ Equivalent to --with-mpc-include=PATH/include
+ plus --with-mpc-lib=PATH/lib])])
+AC_ARG_WITH(mpc-include,
+[AS_HELP_STRING([--with-mpc-include=PATH],
+ [specify directory for installed MPC include files])])
+AC_ARG_WITH(mpc-lib,
+[AS_HELP_STRING([--with-mpc-lib=PATH],
+ [specify directory for the installed MPC library])])
if test "x$with_mpc" != x; then
gmplibs="-L$with_mpc/lib $gmplibs"
# Specify a location for mpfr
# check for this first so it ends up on the link line before gmp.
-AC_ARG_WITH(mpfr-dir, [ --with-mpfr-dir=PATH this option has been REMOVED],
- AC_MSG_ERROR([The --with-mpfr-dir=PATH option has been removed.
-Use --with-mpfr=PATH or --with-mpfr-include=PATH plus --with-mpfr-lib=PATH]))
-
-AC_ARG_WITH(mpfr, [ --with-mpfr=PATH specify prefix directory for installed MPFR package.
- Equivalent to --with-mpfr-include=PATH/include
- plus --with-mpfr-lib=PATH/lib])
-AC_ARG_WITH(mpfr-include, [ --with-mpfr-include=PATH
- specify directory for installed MPFR include files])
-AC_ARG_WITH(mpfr-lib, [ --with-mpfr-lib=PATH specify directory for the installed MPFR library])
+AC_ARG_WITH(mpfr-dir,
+[AS_HELP_STRING([--with-mpfr-dir=PATH], [this option has been REMOVED])],
+[AC_MSG_ERROR([The --with-mpfr-dir=PATH option has been removed.
+Use --with-mpfr=PATH or --with-mpfr-include=PATH plus --with-mpfr-lib=PATH])])
+
+AC_ARG_WITH(mpfr,
+[AS_HELP_STRING([--with-mpfr=PATH],
+ [specify prefix directory for installed MPFR package.
+ Equivalent to --with-mpfr-include=PATH/include
+ plus --with-mpfr-lib=PATH/lib])])
+AC_ARG_WITH(mpfr-include,
+[AS_HELP_STRING([--with-mpfr-include=PATH],
+ [specify directory for installed MPFR include files])])
+AC_ARG_WITH(mpfr-lib,
+[AS_HELP_STRING([--with-mpfr-lib=PATH],
+ [specify directory for the installed MPFR library])])
if test "x$with_mpfr" != x; then
gmplibs="-L$with_mpfr/lib $gmplibs"
fi
# Specify a location for gmp
-AC_ARG_WITH(gmp-dir, [ --with-gmp-dir=PATH this option has been REMOVED],
- AC_MSG_ERROR([The --with-gmp-dir=PATH option has been removed.
-Use --with-gmp=PATH or --with-gmp-include=PATH plus --with-gmp-lib=PATH]))
-
-AC_ARG_WITH(gmp, [ --with-gmp=PATH specify prefix directory for the installed GMP package.
- Equivalent to --with-gmp-include=PATH/include
- plus --with-gmp-lib=PATH/lib])
-AC_ARG_WITH(gmp-include, [ --with-gmp-include=PATH specify directory for installed GMP include files])
-AC_ARG_WITH(gmp-lib, [ --with-gmp-lib=PATH specify directory for the installed GMP library])
+AC_ARG_WITH(gmp-dir,
+[AS_HELP_STRING([--with-gmp-dir=PATH], [this option has been REMOVED])],
+[AC_MSG_ERROR([The --with-gmp-dir=PATH option has been removed.
+Use --with-gmp=PATH or --with-gmp-include=PATH plus --with-gmp-lib=PATH])])
+
+AC_ARG_WITH(gmp,
+[AS_HELP_STRING([--with-gmp=PATH],
+ [specify prefix directory for the installed GMP package.
+ Equivalent to --with-gmp-include=PATH/include
+ plus --with-gmp-lib=PATH/lib])])
+AC_ARG_WITH(gmp-include,
+[AS_HELP_STRING([--with-gmp-include=PATH],
+ [specify directory for installed GMP include files])])
+AC_ARG_WITH(gmp-lib,
+[AS_HELP_STRING([--with-gmp-lib=PATH],
+ [specify directory for the installed GMP library])])
if test "x$with_gmp" != x; then
AC_SUBST(extra_mpc_mpfr_configure_flags)
# Allow host libstdc++ to be specified for static linking with PPL.
-AC_ARG_WITH(host-libstdcxx, [ --with-host-libstdcxx=L Use linker arguments L to link with libstdc++
- when linking with PPL])
+AC_ARG_WITH(host-libstdcxx,
+[AS_HELP_STRING([--with-host-libstdcxx=L],
+ [use linker arguments L to link with libstdc++
+ when linking with PPL])])
case $with_host_libstdcxx in
no|yes)
# Linker flags to use for stage1 or when not boostrapping.
AC_ARG_WITH(stage1-ldflags,
-[ --with-stage1-ldflags=FLAGS Linker flags for stage1],
+[AS_HELP_STRING([--with-stage1-ldflags=FLAGS], [linker flags for stage1])],
[if test "$withval" = "no" -o "$withval" = "yes"; then
stage1_ldflags=
else
# Libraries to use for stage1 or when not bootstrapping.
AC_ARG_WITH(stage1-libs,
-[ -with-stage1-libs=LIBS Libraries for stage1],
+[AS_HELP_STRING([--with-stage1-libs=LIBS], [libraries for stage1])],
[if test "$withval" = "no" -o "$withval" = "yes"; then
stage1_libs=
else
# Libraries to use for stage2 and later builds. This defaults to the
# argument passed to --with-host-libstdcxx.
AC_ARG_WITH(boot-libs,
-[ --with-boot-libs=LIBS Libraries for stage2 and later],
+[AS_HELP_STRING([--with-boot-libs=LIBS], [libraries for stage2 and later])],
[if test "$withval" = "no" -o "$withval" = "yes"; then
poststage1_libs=
else
# Linker flags to use for stage2 and later builds.
AC_ARG_WITH(boot-ldflags,
-[ --with-boot-ldflags=FLAGS Linker flags for stage2 and later],
+[AS_HELP_STRING([--with-boot-ldflags=FLAGS],
+ [linker flags for stage2 and later])],
[if test "$withval" = "no" -o "$withval" = "yes"; then
poststage1_ldflags=
else
AC_SUBST(poststage1_ldflags)
# Check for PPL
-ppllibs=" -lppl_c -lppl -lgmpxx"
+ppllibs=
pplinc=
+pwllib=
+
+AC_ARG_WITH(ppl,
+[AS_HELP_STRING([--with-ppl=PATH],
+ [specify prefix directory for the installed PPL package.
+ Equivalent to --with-ppl-include=PATH/include
+ plus --with-ppl-lib=PATH/lib])])
+AC_ARG_WITH(ppl-include,
+[AS_HELP_STRING([--with-ppl-include=PATH],
+ [specify directory for installed PPL include files])])
+AC_ARG_WITH(ppl-lib,
+[AS_HELP_STRING([--with-ppl-lib=PATH],
+ [specify directory for the installed PPL library])])
-AC_ARG_WITH(ppl, [ --with-ppl=PATH Specify prefix directory for the installed PPL package
- Equivalent to --with-ppl-include=PATH/include
- plus --with-ppl-lib=PATH/lib])
-AC_ARG_WITH(ppl-include, [ --with-ppl-include=PATH Specify directory for installed PPL include files])
-AC_ARG_WITH(ppl-lib, [ --with-ppl-lib=PATH Specify the directory for the installed PPL library])
+AC_ARG_ENABLE(ppl-version-check,
+[AS_HELP_STRING([--disable-ppl-version-check],
+ [disable check for PPL version])])
-case $with_ppl in
- no)
- ppllibs=
- ;;
- "" | yes)
+case $with_ppl in
+ yes | no | "")
;;
*)
- ppllibs="-L$with_ppl/lib -lppl_c -lppl -lgmpxx"
+ ppllibs="-L$with_ppl/lib"
pplinc="-I$with_ppl/include $pplinc"
+ if test -d "$with_ppl/lib" && test -d "$with_ppl/include"; then
+ with_ppl=yes
+ else
+ AC_MSG_ERROR([cannot find directories "$with_ppl/lib" or "$with_ppl/include"])
+ fi
;;
esac
-if test "x$with_ppl_include" != x; then
+
+if test x"$with_ppl_include" != x; then
pplinc="-I$with_ppl_include $pplinc"
+ with_ppl=yes
fi
+
if test "x$with_ppl_lib" != x; then
- ppllibs="-L$with_ppl_lib -lppl_c -lppl -lgmpxx"
+ ppllibs="-L$with_ppl_lib"
+ with_ppl=yes
fi
-if test "x$with_ppl$with_ppl_include$with_ppl_lib" = x && test -d ${srcdir}/ppl; then
- ppllibs='-L$$r/$(HOST_SUBDIR)/ppl/interfaces/C/'"$lt_cv_objdir"' -L$$r/$(HOST_SUBDIR)/ppl/src/'"$lt_cv_objdir"' -lppl_c -lppl -lgmpxx '
+
+if test x"$with_ppl$with_ppl_include$with_ppl_lib" = x && test -d ${srcdir}/ppl; then
+ if test x"$enable_watchdog" = xyes; then
+ pwllib="-lpwl"
+ fi
+ ppllibs='-L$$r/$(HOST_SUBDIR)/ppl/interfaces/C/'"$lt_cv_objdir"' -L$$r/$(HOST_SUBDIR)/ppl/src/'"$lt_cv_objdir"
pplinc='-I$$r/$(HOST_SUBDIR)/ppl/src -I$$r/$(HOST_SUBDIR)/ppl/interfaces/C '
enable_ppl_version_check=no
+ with_ppl=yes
fi
-AC_ARG_ENABLE(ppl-version-check,
-[ --disable-ppl-version-check disable check for PPL version],
-ENABLE_PPL_CHECK=$enableval,
-ENABLE_PPL_CHECK=yes)
+if test "x$with_ppl" != xno; then
+ if test "x$pwllib" = x; then
+ saved_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $ppllibs"
+ AC_CHECK_LIB(pwl,PWL_handle_timeout,[pwllib="-lpwl"])
+ LDFLAGS="$saved_LDFLAGS"
+ fi
-if test "x$with_ppl" != "xno" -a "${ENABLE_PPL_CHECK}" = "yes"; then
- saved_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS $pplinc $gmpinc"
- AC_MSG_CHECKING([for version 0.10 (or later revision) of PPL])
- AC_TRY_COMPILE([#include "ppl_c.h"],[
- #if PPL_VERSION_MAJOR != 0 || PPL_VERSION_MINOR < 10
- choke me
- #endif
- ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); ppllibs= ; pplinc= ; with_ppl=no ])
- CFLAGS="$saved_CFLAGS"
+ ppllibs="$ppllibs -lppl_c -lppl $pwllib -lgmpxx"
+
+ if test "$enable_ppl_version_check" != no; then
+ saved_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $pplinc $gmpinc"
+ AC_MSG_CHECKING([for version 0.11 (revision 0 or later) of PPL])
+ AC_TRY_COMPILE([#include "ppl_c.h"],[
+ #if PPL_VERSION_MAJOR != 0 || PPL_VERSION_MINOR < 11
+ choke me
+ #endif
+ ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); ppllibs= ; pplinc= ; with_ppl=no ])
+ CFLAGS="$saved_CFLAGS"
+ fi
fi
# Flags needed for PPL
dnl with user input.
CLOOG_INIT_FLAGS
if test "x$with_ppl" = "xno"; then
+ dnl Only execute fail-action, if CLooG has been requested.
+ CLOOG_REQUESTED([graphite_requested=yes], [graphite_requested=no])
+ if test "${graphite_requested}" = yes; then
+ AC_MSG_ERROR([Unable to find a usable PPL. See config.log for details.])
+ fi
with_cloog=no
fi
if test "x${with_cloog}" = x && test "x${with_cloog_include}" = x \
clooginc='-I$$r/$(HOST_SUBDIR)/cloog/include -I$$s/cloog/include '
fi
if test "x$with_cloog" != "xno"; then
- dnl Version check for CLooG-Org
- dnl As long as there is no new release of CLooG,
- dnl we will check for 0.14.0.
+ dnl The minimal version of CLooG required for Graphite.
dnl
- dnl The first git revision that will work with
- dnl GCC is: bd91b845a65805c290d43fc1bef8139864a163fb
- dnl This is enforced implictly, as this is the commit that
- dnl introduced the versioning information used within our
- dnl checks.
- dnl
- dnl If we're using CLooG-Legacy, the provided version information
- dnl will be ignored.
- CLOOG_CHECK_VERSION(0,14,0)
+ dnl If we use CLooG-Legacy, the provided version information is
+ dnl ignored.
+ CLOOG_CHECK_VERSION(0,16,1)
- dnl Only execute fail-action, if CLooG has been
- dnl requested.
+ dnl Only execute fail-action, if CLooG has been requested.
CLOOG_IF_FAILED([
- AC_MSG_ERROR([Unable to find a usable CLooG. See config.log for details.])])
+ AC_MSG_ERROR([Unable to find a usable CLooG. See config.log for details.])])
fi
# Check for LTO support.
AC_ARG_ENABLE(lto,
-[ --enable-lto enable link time optimization support],
+[AS_HELP_STRING([--enable-lto], [enable link time optimization support])],
enable_lto=$enableval,
enable_lto=yes; default_enable_lto=yes)
build_lto_plugin=yes
],[if test x"$default_enable_lto" = x"yes" ; then
case $target in
- *-apple-darwin* | *-cygwin* | *-mingw*) ;;
+ *-apple-darwin9 | *-cygwin* | *-mingw*) ;;
# On other non-ELF platforms, LTO has yet to be validated.
*) enable_lto=no ;;
esac
fi
AC_ARG_ENABLE(stage1-languages,
-[ --enable-stage1-languages@<:@=all@:>@ choose additional languages to build during
- stage1. Mostly useful for compiler development.],
+ [AS_HELP_STRING([[--enable-stage1-languages[=all]]],
+ [choose additional languages to build during
+ stage1. Mostly useful for compiler development])],
[case ,${enable_stage1_languages}, in
,no,|,,)
# Set it to something that will have no effect in the loop below
# Check for Boehm's garbage collector
AC_ARG_ENABLE(objc-gc,
-[ --enable-objc-gc enable use of Boehm's garbage collector with the
- GNU Objective-C runtime],
+[AS_HELP_STRING([--enable-objc-gc],
+ [enable use of Boehm's garbage collector with the
+ GNU Objective-C runtime])],
[case ,${enable_languages},:${enable_objc_gc}:${noconfigdirs} in
*,objc,*:*:yes:*target-boehm-gc*)
AC_MSG_ERROR([Boehm's garbage collector was requested yet not supported in this configuration])
copy_dirs=
AC_ARG_WITH([build-sysroot],
- [ --with-build-sysroot=SYSROOT
- use sysroot as the system root during the build],
+ [AS_HELP_STRING([--with-build-sysroot=SYSROOT],
+ [use sysroot as the system root during the build])],
[if test x"$withval" != x ; then
SYSROOT_CFLAGS_FOR_TARGET="--sysroot=$withval"
fi],
AC_SUBST(SYSROOT_CFLAGS_FOR_TARGET)
AC_ARG_WITH([debug-prefix-map],
- [ --with-debug-prefix-map='A=B C=D ...'
- map A to B, C to D ... in debug information],
+ [AS_HELP_STRING([--with-debug-prefix-map='A=B C=D ...'],
+ [map A to B, C to D ... in debug information])],
[if test x"$withval" != x; then
DEBUG_PREFIX_CFLAGS_FOR_TARGET=
for debug_map in $withval; do
# Do not nest @if/@endif pairs, because configure will not warn you at all.
AC_ARG_ENABLE([bootstrap],
-[ --enable-bootstrap enable bootstrapping @<:@yes if native build@:>@],,
+[AS_HELP_STRING([--enable-bootstrap],
+ [enable bootstrapping @<:@yes if native build@:>@])],,
enable_bootstrap=default)
# Issue errors and warnings for invalid/strange bootstrap combinations.
AC_MSG_CHECKING(for default BUILD_CONFIG)
AC_ARG_WITH([build-config],
- [--with-build-config='NAME NAME2...'
- Use config/NAME.mk build configuration],
+ [AS_HELP_STRING([--with-build-config='NAME NAME2...'],
+ [use config/NAME.mk build configuration])],
[case $with_build_config in
yes) with_build_config= ;;
no) with_build_config= BUILD_CONFIG= ;;
# Create the serialization dependencies. This uses a temporary file.
AC_ARG_ENABLE([serial-configure],
-[ --enable-serial-@<:@{host,target,build}-@:>@configure
- force sequential configuration of
- sub-packages for the host, target or build
- machine, or all sub-packages])
+[AS_HELP_STRING([[--enable-serial-[{host,target,build}-]configure]],
+ [force sequential configuration of
+ sub-packages for the host, target or build
+ machine, or all sub-packages])])
case ${enable_serial_configure} in
yes)
# Also strip program-prefix, program-suffix, and program-transform-name,
# so that we can pass down a consistent program-transform-name.
baseargs=
+tbaseargs=
keep_next=no
skip_next=no
eval "set -- $ac_configure_args"
ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
baseargs="$baseargs '$ac_arg'"
+ tbaseargs="$tbaseargs '$ac_arg'"
keep_next=no
continue
fi
;;
esac
+ skip_targ=no
+ case $ac_arg in
+changequote(,)
+ --with-* | --without-*)
+ libopt=`echo "$ac_arg" | sed -e 's,^--[^-_]*[-_],,' -e 's,=.*$,,'`
+
+ case $libopt in
+ *[-_]include)
+ lib=`echo "$libopt" | sed 's,[-_]include$,,'`
+ ;;
+ *[-_]lib)
+ lib=`echo "$libopt" | sed 's,[-_]lib$,,'`
+ ;;
+ *)
+ lib=$libopt
+ ;;
+ esac
+changequote([,])
+
+ case $lib in
+ mpc | mpfr | gmp | ppl | cloog)
+ # If we're processing --with-$lib, --with-$lib-include or
+ # --with-$lib-lib, for one of the libs above, and target is
+ # different from host, don't pass the current argument to any
+ # target library's configure.
+ if test x$is_cross_compiler = xyes; then
+ skip_targ=yes
+ fi
+ ;;
+ esac
+ ;;
+ esac
+
case "$ac_arg" in
--cache-file=/dev/null | \
-cache-file=/dev/null )
# Handled here to avoid the test to skip args below.
baseargs="$baseargs '$ac_arg'"
+ tbaseargs="$tbaseargs '$ac_arg'"
# Assert: $separate_arg should always be no.
keep_next=$separate_arg
;;
ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
baseargs="$baseargs '$ac_arg'"
+ if test X"$skip_targ" = Xno; then
+ tbaseargs="$tbaseargs '$ac_arg'"
+ fi
keep_next=$separate_arg
;;
*)
gcc_transform_name=`cat conftestsed.out`
rm -f conftestsed.out
baseargs="$baseargs --program-transform-name='${gcc_transform_name}'"
+tbaseargs="$tbaseargs --program-transform-name='${gcc_transform_name}'"
if test "$silent" = yes; then
baseargs="$baseargs --silent"
+ tbaseargs="$tbaseargs --silent"
fi
baseargs="$baseargs --disable-option-checking"
+tbaseargs="$tbaseargs --disable-option-checking"
# Record and document user additions to sub configure arguments.
AC_ARG_VAR([build_configargs],
# This seems to be due to autoconf 2.5x stupidity.
host_configargs="$host_configargs --cache-file=./config.cache ${extra_host_args} ${baseargs}"
-target_configargs="$target_configargs ${baseargs}"
+target_configargs="$target_configargs ${tbaseargs}"
# Passing a --with-cross-host argument lets the target libraries know
# whether they are being built with a cross-compiler or being built
# Target tools.
AC_ARG_WITH([build-time-tools],
- [ --with-build-time-tools=PATH
- use given path to find target tools during the build],
+ [AS_HELP_STRING([--with-build-time-tools=PATH],
+ [use given path to find target tools during the build])],
[case x"$withval" in
x/*) ;;
*)
AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
AC_ARG_ENABLE(maintainer-mode,
-[ --enable-maintainer-mode enable make rules and dependencies not useful
- (and sometimes confusing) to the casual installer],
+[AS_HELP_STRING([--enable-maintainer-mode],
+ [enable make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer])],
USE_MAINTAINER_MODE=$enableval,
USE_MAINTAINER_MODE=no)
AC_MSG_RESULT($USE_MAINTAINER_MODE)
# Enable --enable-checking in stage1 of the compiler.
AC_ARG_ENABLE(stage1-checking,
-[ --enable-stage1-checking@<:@=all@:>@ choose additional checking for stage1
- of the compiler],
+[AS_HELP_STRING([[--enable-stage1-checking[=all]]],
+ [choose additional checking for stage1 of the compiler])],
[stage1_checking=--enable-checking=${enable_stage1_checking}],
[if test "x$enable_checking" = xno || test "x$enable_checking" = x; then
stage1_checking=--enable-checking=yes,types
# Enable -Werror in bootstrap stage2 and later.
AC_ARG_ENABLE(werror,
-[ --enable-werror enable -Werror in bootstrap stage2 and later], [],
+[AS_HELP_STRING([--enable-werror],
+ [enable -Werror in bootstrap stage2 and later])], [],
[if test -d ${srcdir}/gcc && test x"`cat $srcdir/gcc/DEV-PHASE`" = xexperimental; then
enable_werror=yes
else
OSDN Git Service
