# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-# 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
+# 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
# Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify it
target-boehm-gc \
${libgcj} \
target-libobjc \
- target-libada"
+ target-libada \
+ target-libgo"
# these tools are built using the target libraries, and are intended to
# run only in the target environment
yes) skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` ;;
esac
-# Handle --enable-gold.
-# --enable-gold Build only gold
-# --disable-gold [default] Build only ld
-# --enable-gold=both Build both gold and ld, ld is default
-# --enable-gold=both/ld Same
-# --enable-gold=both/gold Build both gold and ld, gold is default, ld is renamed ld.bfd
-
+# Handle --enable-gold, --enable-ld.
+# --disable-gold [--enable-ld]
+# Build only ld. Default option.
+# --enable-gold [--enable-ld]
+# Build both gold and ld. Install gold as "ld.gold", install ld
+# as "ld.bfd" and "ld".
+# --enable-gold=default [--enable-ld]
+# Build both gold and ld. Install gold as "ld.gold" and "ld",
+# install ld as "ld.bfd".
+# --enable-gold[=default] --disable-ld
+# Build only gold, which is then installed as both "ld.gold" and "ld".
+# --enable-gold --enable-ld=default
+# Build both gold (installed as "ld.gold") and ld (installed as "ld"
+# and ld.bfd).
+# In other words, ld is default
+# --enable-gold=default --enable-ld=default
+# Error.
+
+default_ld=
AC_ARG_ENABLE(gold,
-[[ --enable-gold[=ARG] build gold [ARG={both}[/{gold,ld}]]]],
+[AS_HELP_STRING([[--enable-gold[=ARG]]],
+ [build gold @<:@ARG={default,yes,no}@:>@])],
ENABLE_GOLD=$enableval,
ENABLE_GOLD=no)
- case "${ENABLE_GOLD}" in
- yes|both|both/gold|both/ld)
+case "${ENABLE_GOLD}" in
+ yes|default)
# Check for ELF target.
is_elf=no
case "${target}" in
# Check for target supported by gold.
case "${target}" in
i?86-*-* | x86_64-*-* | sparc*-*-* | powerpc*-*-* | arm*-*-*)
- case "${ENABLE_GOLD}" in
- both*)
- configdirs="$configdirs gold"
- ;;
- *)
- configdirs=`echo " ${configdirs} " | sed -e 's/ ld / gold /'`
- ;;
- esac
+ configdirs="$configdirs gold"
+ if test x${ENABLE_GOLD} = xdefault; then
+ default_ld=gold
+ fi
ENABLE_GOLD=yes
;;
esac
*)
AC_MSG_ERROR([invalid --enable-gold argument])
;;
- esac
+esac
+
+AC_ARG_ENABLE(ld,
+[AS_HELP_STRING([[--enable-ld[=ARG]]],
+ [build ld @<:@ARG={default,yes,no}@:>@])],
+ENABLE_LD=$enableval,
+ENABLE_LD=yes)
+
+case "${ENABLE_LD}" in
+ default)
+ if test x${default_ld} != x; then
+ AC_MSG_ERROR([either gold or ld can be the default ld])
+ fi
+ ;;
+ yes)
+ ;;
+ no)
+ if test x${ENABLE_GOLD} != xyes; then
+ AC_MSG_WARN([neither ld nor gold are enabled])
+ fi
+ configdirs=`echo " ${configdirs} " | sed -e 's/ ld / /'`
+ ;;
+ *)
+ AC_MSG_ERROR([invalid --enable-ld argument])
+ ;;
+esac
# Configure extra directories which are host specific
hppa*64*-*-*)
noconfigdirs="$noconfigdirs byacc"
;;
- i[[3456789]]86-*-vsta)
- noconfigdirs="$noconfigdirs tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl gnuserv gettext"
- ;;
- i[[3456789]]86-*-go32* | i[[3456789]]86-*-msdosdjgpp*)
+ i[[3456789]]86-*-msdosdjgpp*)
noconfigdirs="$noconfigdirs tcl tk expect dejagnu send-pr uudecode guile itcl gnuserv libffi"
;;
x86_64-*-mingw*)
# noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl gnuserv"
noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool newlib"
;;
- i[[3456789]]86-*-beos*)
- noconfigdirs="$noconfigdirs tk itcl libgui gdb"
- ;;
*-*-cygwin*)
noconfigdirs="$noconfigdirs autoconf automake send-pr rcs guile perl"
;;
*-*-netbsd*)
noconfigdirs="$noconfigdirs rcs"
;;
- ppc*-*-pe)
- noconfigdirs="$noconfigdirs patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl gnuserv"
- ;;
- powerpc-*-beos*)
- noconfigdirs="$noconfigdirs tk itcl libgui gdb dejagnu readline"
- ;;
esac
+AC_ARG_ENABLE(libquadmath,
+AS_HELP_STRING([--disable-libquadmath],
+ [do not build libquadmath directory]),
+ENABLE_LIBQUADMATH=$enableval,
+ENABLE_LIBQUADMATH=yes)
+if test "${ENABLE_LIBQUADMATH}" = "no" ; then
+ noconfigdirs="$noconfigdirs target-libquadmath"
+fi
+
+
+AC_ARG_ENABLE(libquadmath-support,
+AS_HELP_STRING([--disable-libquadmath-support],
+ [disable libquadmath support for Fortran]),
+ENABLE_LIBQUADMATH_SUPPORT=$enableval,
+ENABLE_LIBQUADMATH_SUPPORT=yes)
+enable_libquadmath_support=
+if test "${ENABLE_LIBQUADMATH_SUPPORT}" = "no" ; then
+ enable_libquadmath_support=no
+fi
+
+
AC_ARG_ENABLE(libada,
-[ --enable-libada build libada directory],
+[AS_HELP_STRING([--enable-libada], [build libada directory])],
ENABLE_LIBADA=$enableval,
ENABLE_LIBADA=yes)
if test "${ENABLE_LIBADA}" != "yes" ; then
fi
AC_ARG_ENABLE(libssp,
-[ --enable-libssp build libssp directory],
+[AS_HELP_STRING([--enable-libssp], [build libssp directory])],
ENABLE_LIBSSP=$enableval,
ENABLE_LIBSSP=yes)
;;
no)
# Make sure we get it printed in the list of not supported target libs.
- noconfigdirs="$noconfigdirs ${libgcj}"
+ # Don't disable libffi, though, other languages use it.
+ noconfigdirs="$noconfigdirs `echo ${libgcj} | sed -e 's/target-libffi//'`"
+ # Clear libgcj_saved so that even if java is enabled libffi won't be
+ # built.
+ libgcj_saved=
;;
esac
libgloss_dir=wince
;;
arc-*-*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
- arm-semi-aof )
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
- arm-*-coff | strongarm-*-coff | xscale-*-coff)
+ arm-*-coff)
noconfigdirs="$noconfigdirs ${libgcj}"
libgloss_dir=arm
;;
- arm-*-elf* | strongarm-*-elf* | xscale-*-elf* | arm*-*-eabi* )
+ arm-*-elf* | arm*-*-eabi* )
noconfigdirs="$noconfigdirs target-libffi target-qthreads"
libgloss_dir=arm
;;
arm-*-pe*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
- thumb-*-coff)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
- thumb-*-elf)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
- thumb-*-pe)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
arm-*-riscix*)
noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
;;
;;
bfin-*-*)
unsupported_languages="$unsupported_languages java"
- noconfigdirs="$noconfigdirs target-boehm-gc gdb"
+ noconfigdirs="$noconfigdirs target-boehm-gc"
if test x${is_cross_compiler} != xno ; then
target_configdirs="${target_configdirs} target-bsp target-cygmon"
fi
*-*-aout)
unsupported_languages="$unsupported_languages fortran"
noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
- *-*-elf)
- noconfigdirs="$noconfigdirs target-boehm-gc";;
+ *-*-elf) # See PR46792 regarding target-libffi.
+ noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
*-*-linux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss";;
*)
esac
libgloss_dir=cris
;;
- crx-*-*)
- noconfigdirs="$noconfigdirs target-libstdc++-v3 target-mudflap ${libgcj}"
- ;;
d10v-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
;;
d30v-*-*)
noconfigdirs="$noconfigdirs ${libgcj} gdb"
;;
- ep9312-*-elf | ep9312-*-coff)
- libgloss_dir=arm
- ;;
fr30-*-elf*)
noconfigdirs="$noconfigdirs ${libgcj} gdb"
;;
;;
hppa1.1-*-osf* | hppa1.1-*-bsd* )
;;
- hppa*64*-*-linux* | parisc*64*-*-linux*)
+ hppa*64*-*-linux*)
# In this case, it's because the hppa64-linux target is for
# the kernel only at this point and has no libc, and thus no
# headers, crt*.o, etc., all of which are needed by these.
noconfigdirs="$noconfigdirs target-zlib"
;;
- parisc*-*-linux* | hppa*-*-linux*)
+ hppa*-*-linux*)
;;
hppa*-*-*elf* | \
hppa*-*-lites* | \
noconfigdirs="$noconfigdirs readline mmalloc libgui itcl gdb"
;;
ia64*-**-hpux*)
- # No gdb or ld support yet.
- noconfigdirs="$noconfigdirs ${libgcj} readline mmalloc libgui itcl gdb ld"
+ # No ld support yet.
+ noconfigdirs="$noconfigdirs ${libgcj} libgui itcl ld"
;;
ia64*-*-*vms*)
# No gdb or ld support yet.
noconfigdirs="$noconfigdirs ${libgcj} tix readline mmalloc libgui itcl gdb ld"
;;
- i370-*-opened*)
- ;;
i[[3456789]]86-*-coff | i[[3456789]]86-*-elf)
noconfigdirs="$noconfigdirs ${libgcj}"
libgloss_dir=i386
echo "Warning: winsup/cygwin is missing so newlib can't be built."
fi
;;
- i[[3456789]]86-moss-msdos | i[[3456789]]86-*-moss* | \
- i[[3456789]]86-*-uwin* | i[[3456789]]86-*-interix* )
+ i[[3456789]]86-*-interix* )
;;
i[[3456789]]86-*-pe)
- noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
i[[3456789]]86-*-sco3.2v5*)
# The linker does not yet know about weak symbols in COFF,
noconfigdirs="$noconfigdirs ${libgcj}"
;;
m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
- noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libiberty"
libgloss_dir=m68hc11
;;
m68k-*-elf*)
m68*-*-* | fido-*-*)
libgloss_dir=m68k
;;
- mcore-*-pe*)
- # The EPOC C++ environment does not support exceptions or rtti,
- # and so building libstdc++-v3 tends not to always work.
- noconfigdirs="$noconfigdirs target-libstdc++-v3"
- ;;
mmix-*-*)
noconfigdirs="$noconfigdirs target-libffi target-boehm-gc gdb libgloss"
unsupported_languages="$unsupported_languages fortran java"
mt-*-*)
noconfigdirs="$noconfigdirs sim"
;;
+ picochip-*-*)
+ noconfigdirs="$noconfigdirs target-libiberty"
+ ;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp target-newlib ${libgcj}"
;;
- powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
+ powerpc*-*-winnt* | powerpc*-*-pe*)
target_configdirs="$target_configdirs target-winsup"
noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl gnuserv ${libgcj}"
# always build newlib.
;;
sh-*-* | sh64-*-*)
case "${host}" in
- i[[3456789]]86-*-vsta) ;; # don't add gprof back in
- i[[3456789]]86-*-go32*) ;; # don't add gprof back in
i[[3456789]]86-*-msdosdjgpp*) ;; # don't add gprof back in
*) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
esac
esac
# Work in distributions that contain no compiler tools, like Autoconf.
-tentative_cc=""
host_makefile_frag=/dev/null
if test -d ${srcdir}/config ; then
case "${host}" in
- m68k-hp-hpux*)
- # Avoid "too much defining" errors from HPUX compiler.
- tentative_cc="cc -Wp,-H256000"
- # If "ar" in $PATH is GNU ar, the symbol table may need rebuilding.
- # If it's HP/UX ar, this should be harmless.
- RANLIB="ar ts"
- ;;
- m68k-apollo-sysv*)
- tentative_cc="cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DUSG"
- ;;
- m68k-apollo-bsd*)
- #None of the Apollo compilers can compile gas or binutils. The preprocessor
- # chokes on bfd, the compiler won't let you assign integers to enums, and
- # other problems. Defining CC to gcc is a questionable way to say "don't use
- # the apollo compiler" (the preferred version of GCC could be called cc,
- # or whatever), but I'm not sure leaving CC as cc is any better...
- #CC=cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DNO_STDARG
- # Used to have BISON=yacc.
- tentative_cc=gcc
- ;;
- m88k-dg-dgux*)
- tentative_cc="gcc -Wall -ansi -D__using_DGUX"
- ;;
- m88k-harris-cxux*)
- # Under CX/UX, we want to tell the compiler to use ANSI mode.
- tentative_cc="cc -Xa"
- host_makefile_frag="config/mh-cxux"
- ;;
- m88k-motorola-sysv*)
- ;;
- mips*-dec-ultrix*)
- tentative_cc="cc -Wf,-XNg1000"
- host_makefile_frag="config/mh-decstation"
- ;;
- mips*-nec-sysv4*)
- # The C compiler on NEC MIPS SVR4 needs bigger tables.
- tentative_cc="cc -ZXNd=5000 -ZXNg=1000"
- host_makefile_frag="config/mh-necv4"
- ;;
- mips*-sgi-irix4*)
- # Tell compiler to use K&R C. We can't compile under the SGI Ansi
- # environment. Also bump switch table size so that cp-parse will
- # compile. Bump string length limit so linker builds.
- tentative_cc="cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000 -Wf,-XNl8192"
- ;;
- mips*-*-sysv4*)
- host_makefile_frag="config/mh-sysv4"
- ;;
- mips*-*-sysv*)
- # This is for a MIPS running RISC/os 4.52C.
-
- # This is needed for GDB, but needs to be in the top-level make because
- # if a library is compiled with the bsd headers and gets linked with the
- # sysv system libraries all hell can break loose (e.g. a jmp_buf might be
- # a different size).
- # ptrace(2) apparently has problems in the BSD environment. No workaround is
- # known except to select the sysv environment. Could we use /proc instead?
- # These "sysv environments" and "bsd environments" often end up being a pain.
- #
- # This is not part of CFLAGS because perhaps not all C compilers have this
- # option.
- tentative_cc="cc -systype sysv"
- ;;
- i370-ibm-opened*)
- tentative_cc="c89"
- ;;
- i[[3456789]]86-*-sysv5*)
- host_makefile_frag="config/mh-sysv5"
- ;;
- i[[3456789]]86-*-dgux*)
- tentative_cc="gcc -Wall -ansi -D__using_DGUX"
- host_makefile_frag="config/mh-dgux386"
- ;;
- i[[3456789]]86-ncr-sysv4.3*)
- # The MetaWare compiler will generate a copyright message unless you
- # turn it off by adding the -Hnocopyr flag.
- tentative_cc="cc -Hnocopyr"
- ;;
- i[[3456789]]86-ncr-sysv4*)
- # for an NCR 3000 (i486/SVR4) system.
- # The NCR 3000 ships with a MetaWare compiler installed as /bin/cc.
- # This compiler not only emits obnoxious copyright messages every time
- # you run it, but it chokes and dies on a whole bunch of GNU source
- # files. Default to using the AT&T compiler installed in /usr/ccs/ATT/cc.
- tentative_cc="/usr/ccs/ATT/cc"
- host_makefile_frag="config/mh-ncr3000"
- ;;
- i[[3456789]]86-*-sco3.2v5*)
- ;;
- i[[3456789]]86-*-sco*)
- # The native C compiler botches some simple uses of const. Unfortunately,
- # it doesn't defined anything like "__sco__" for us to test for in ansidecl.h.
- tentative_cc="cc -Dconst="
- host_makefile_frag="config/mh-sco"
- ;;
- i[[3456789]]86-*-udk*)
- host_makefile_frag="config/mh-sysv5"
- ;;
- i[[3456789]]86-*-solaris2*)
- host_makefile_frag="config/mh-sysv4"
- ;;
i[[3456789]]86-*-msdosdjgpp*)
host_makefile_frag="config/mh-djgpp"
;;
*-interix*)
host_makefile_frag="config/mh-interix"
;;
- vax-*-ultrix2*)
- # The old BSD pcc isn't up to compiling parts of gdb so use gcc
- tentative_cc=gcc
- ;;
- *-*-solaris2*)
- host_makefile_frag="config/mh-solaris"
- ;;
- m68k-sun-sunos*)
- # Sun's C compiler needs the -J flag to be able to compile cp-parse.c
- # without overflowing the jump tables (-J says to use a 32 bit table)
- tentative_cc="cc -J"
- ;;
hppa*-hp-hpux10*)
- tentative_cc="cc -Wp,-H256000"
host_makefile_frag="config/mh-pa-hpux10"
;;
- hppa*-hp-hpux* | hppa*-*-hiux*)
- tentative_cc="cc -Wp,-H256000"
+ hppa*-hp-hpux*)
host_makefile_frag="config/mh-pa"
;;
hppa*-*)
host_makefile_frag="config/mh-pa"
;;
- *-hp-hpux* | *-*-hiux*)
- tentative_cc="cc -Wp,-H256000"
- ;;
- rs6000-*-lynxos*)
- # /bin/cc is less than useful for our purposes. Always use GCC
- tentative_cc="/usr/cygnus/progressive/bin/gcc"
- host_makefile_frag="config/mh-lynxrs6k"
- ;;
*-*-darwin*)
host_makefile_frag="config/mh-darwin"
;;
rs6000-*-aix*)
host_makefile_frag="config/mh-ppc-aix"
;;
- *-*-lynxos*)
- # /bin/cc is less than useful for our purposes. Always use GCC
- tentative_cc="/bin/gcc"
- ;;
- *-*-sysv4*)
- host_makefile_frag="config/mh-sysv4"
- ;;
- # This is placed last to prevent interfering with the cases above.
- i[[3456789]]86-*-*)
- # Build the stage2 and stage3 compilers with -fomit-frame-pointer.
- host_makefile_frag="config/mh-x86omitfp"
- ;;
esac
fi
-# If we aren't going to be using gcc, see if we can extract a definition
-# of CC from the fragment.
-# Actually, use the 'pre-extracted' version above.
-if test -z "${CC}" && test "${build}" = "${host}" ; then
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- found=
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/gcc; then
- found=yes
- break
- fi
- done
- IFS="$save_ifs"
- if test -z "${found}" && test -n "${tentative_cc}" ; then
- CC=$tentative_cc
- fi
-fi
-
if test "${build}" != "${host}" ; then
AR_FOR_BUILD=${AR_FOR_BUILD-ar}
AS_FOR_BUILD=${AS_FOR_BUILD-as}
CXX_FOR_BUILD=${CXX_FOR_BUILD-g++}
GCJ_FOR_BUILD=${GCJ_FOR_BUILD-gcj}
GFORTRAN_FOR_BUILD=${GFORTRAN_FOR_BUILD-gfortran}
+ GOC_FOR_BUILD=${GOC_FOR_BUILD-gccgo}
DLLTOOL_FOR_BUILD=${DLLTOOL_FOR_BUILD-dlltool}
LD_FOR_BUILD=${LD_FOR_BUILD-ld}
NM_FOR_BUILD=${NM_FOR_BUILD-nm}
CXX_FOR_BUILD="\$(CXX)"
GCJ_FOR_BUILD="\$(GCJ)"
GFORTRAN_FOR_BUILD="\$(GFORTRAN)"
+ GOC_FOR_BUILD="\$(GOC)"
DLLTOOL_FOR_BUILD="\$(DLLTOOL)"
LD_FOR_BUILD="\$(LD)"
NM_FOR_BUILD="\$(NM)"
# See if we are building gcc with C++.
AC_ARG_ENABLE(build-with-cxx,
-[ --enable-build-with-cxx build with C++ compiler instead of C compiler],
+[AS_HELP_STRING([--enable-build-with-cxx],
+ [build with C++ compiler instead of C compiler])],
ENABLE_BUILD_WITH_CXX=$enableval,
ENABLE_BUILD_WITH_CXX=no)
# Specify a location for mpc
# check for this first so it ends up on the link line before mpfr.
-AC_ARG_WITH(mpc, [ --with-mpc=PATH specify prefix directory for installed MPC package.
- Equivalent to --with-mpc-include=PATH/include
- plus --with-mpc-lib=PATH/lib])
-AC_ARG_WITH(mpc-include, [ --with-mpc-include=PATH
- specify directory for installed MPC include files])
-AC_ARG_WITH(mpc-lib, [ --with-mpc-lib=PATH specify directory for the installed MPC library])
+AC_ARG_WITH(mpc,
+[AS_HELP_STRING([--with-mpc=PATH],
+ [specify prefix directory for installed MPC package.
+ Equivalent to --with-mpc-include=PATH/include
+ plus --with-mpc-lib=PATH/lib])])
+AC_ARG_WITH(mpc-include,
+[AS_HELP_STRING([--with-mpc-include=PATH],
+ [specify directory for installed MPC include files])])
+AC_ARG_WITH(mpc-lib,
+[AS_HELP_STRING([--with-mpc-lib=PATH],
+ [specify directory for the installed MPC library])])
if test "x$with_mpc" != x; then
gmplibs="-L$with_mpc/lib $gmplibs"
# Specify a location for mpfr
# check for this first so it ends up on the link line before gmp.
-AC_ARG_WITH(mpfr-dir, [ --with-mpfr-dir=PATH this option has been REMOVED],
- AC_MSG_ERROR([The --with-mpfr-dir=PATH option has been removed.
-Use --with-mpfr=PATH or --with-mpfr-include=PATH plus --with-mpfr-lib=PATH]))
-
-AC_ARG_WITH(mpfr, [ --with-mpfr=PATH specify prefix directory for installed MPFR package.
- Equivalent to --with-mpfr-include=PATH/include
- plus --with-mpfr-lib=PATH/lib])
-AC_ARG_WITH(mpfr-include, [ --with-mpfr-include=PATH
- specify directory for installed MPFR include files])
-AC_ARG_WITH(mpfr-lib, [ --with-mpfr-lib=PATH specify directory for the installed MPFR library])
+AC_ARG_WITH(mpfr-dir,
+[AS_HELP_STRING([--with-mpfr-dir=PATH], [this option has been REMOVED])],
+[AC_MSG_ERROR([The --with-mpfr-dir=PATH option has been removed.
+Use --with-mpfr=PATH or --with-mpfr-include=PATH plus --with-mpfr-lib=PATH])])
+
+AC_ARG_WITH(mpfr,
+[AS_HELP_STRING([--with-mpfr=PATH],
+ [specify prefix directory for installed MPFR package.
+ Equivalent to --with-mpfr-include=PATH/include
+ plus --with-mpfr-lib=PATH/lib])])
+AC_ARG_WITH(mpfr-include,
+[AS_HELP_STRING([--with-mpfr-include=PATH],
+ [specify directory for installed MPFR include files])])
+AC_ARG_WITH(mpfr-lib,
+[AS_HELP_STRING([--with-mpfr-lib=PATH],
+ [specify directory for the installed MPFR library])])
if test "x$with_mpfr" != x; then
gmplibs="-L$with_mpfr/lib $gmplibs"
fi
# Specify a location for gmp
-AC_ARG_WITH(gmp-dir, [ --with-gmp-dir=PATH this option has been REMOVED],
- AC_MSG_ERROR([The --with-gmp-dir=PATH option has been removed.
-Use --with-gmp=PATH or --with-gmp-include=PATH plus --with-gmp-lib=PATH]))
-
-AC_ARG_WITH(gmp, [ --with-gmp=PATH specify prefix directory for the installed GMP package.
- Equivalent to --with-gmp-include=PATH/include
- plus --with-gmp-lib=PATH/lib])
-AC_ARG_WITH(gmp-include, [ --with-gmp-include=PATH specify directory for installed GMP include files])
-AC_ARG_WITH(gmp-lib, [ --with-gmp-lib=PATH specify directory for the installed GMP library])
+AC_ARG_WITH(gmp-dir,
+[AS_HELP_STRING([--with-gmp-dir=PATH], [this option has been REMOVED])],
+[AC_MSG_ERROR([The --with-gmp-dir=PATH option has been removed.
+Use --with-gmp=PATH or --with-gmp-include=PATH plus --with-gmp-lib=PATH])])
+
+AC_ARG_WITH(gmp,
+[AS_HELP_STRING([--with-gmp=PATH],
+ [specify prefix directory for the installed GMP package.
+ Equivalent to --with-gmp-include=PATH/include
+ plus --with-gmp-lib=PATH/lib])])
+AC_ARG_WITH(gmp-include,
+[AS_HELP_STRING([--with-gmp-include=PATH],
+ [specify directory for installed GMP include files])])
+AC_ARG_WITH(gmp-lib,
+[AS_HELP_STRING([--with-gmp-lib=PATH],
+ [specify directory for the installed GMP library])])
if test "x$with_gmp" != x; then
AC_SUBST(extra_mpc_mpfr_configure_flags)
# Allow host libstdc++ to be specified for static linking with PPL.
-AC_ARG_WITH(host-libstdcxx, [ --with-host-libstdcxx=L Use linker arguments L to link with libstdc++
- when linking with PPL])
+AC_ARG_WITH(host-libstdcxx,
+[AS_HELP_STRING([--with-host-libstdcxx=L],
+ [use linker arguments L to link with libstdc++
+ when linking with PPL])])
case $with_host_libstdcxx in
no|yes)
# Linker flags to use for stage1 or when not boostrapping.
AC_ARG_WITH(stage1-ldflags,
-[ --with-stage1-ldflags=FLAGS Linker flags for stage1],
+[AS_HELP_STRING([--with-stage1-ldflags=FLAGS], [linker flags for stage1])],
[if test "$withval" = "no" -o "$withval" = "yes"; then
stage1_ldflags=
else
# Libraries to use for stage1 or when not bootstrapping.
AC_ARG_WITH(stage1-libs,
-[ -with-stage1-libs=LIBS Libraries for stage1],
+[AS_HELP_STRING([--with-stage1-libs=LIBS], [libraries for stage1])],
[if test "$withval" = "no" -o "$withval" = "yes"; then
stage1_libs=
else
# Libraries to use for stage2 and later builds. This defaults to the
# argument passed to --with-host-libstdcxx.
AC_ARG_WITH(boot-libs,
-[ --with-boot-libs=LIBS Libraries for stage2 and later],
+[AS_HELP_STRING([--with-boot-libs=LIBS], [libraries for stage2 and later])],
[if test "$withval" = "no" -o "$withval" = "yes"; then
poststage1_libs=
else
# Linker flags to use for stage2 and later builds.
AC_ARG_WITH(boot-ldflags,
-[ --with-boot-ldflags=FLAGS Linker flags for stage2 and later],
+[AS_HELP_STRING([--with-boot-ldflags=FLAGS],
+ [linker flags for stage2 and later])],
[if test "$withval" = "no" -o "$withval" = "yes"; then
poststage1_ldflags=
else
poststage1_ldflags=$withval
fi],
[poststage1_ldflags=
- # With --enable-build-with-cxx, default to linking libstdc++ and
- # libgcc statically. But if the user explicitly specified the
- # libraries to use, trust that they are doing what they want.
- if test "$ENABLE_BUILD_WITH_CXX" = "yes" -a "$poststage1_libs" = ""; then
+ # In stages 2 and 3, default to linking libstdc++ and libgcc
+ # statically. But if the user explicitly specified the libraries to
+ # use, trust that they are doing what they want.
+ if test "$poststage1_libs" = ""; then
poststage1_ldflags="-static-libstdc++ -static-libgcc"
fi])
AC_SUBST(poststage1_ldflags)
# Check for PPL
-ppllibs=" -lppl_c -lppl -lgmpxx"
+ppllibs=
pplinc=
+pwllib=
+
+AC_ARG_WITH(ppl,
+[AS_HELP_STRING([--with-ppl=PATH],
+ [specify prefix directory for the installed PPL package.
+ Equivalent to --with-ppl-include=PATH/include
+ plus --with-ppl-lib=PATH/lib])])
+AC_ARG_WITH(ppl-include,
+[AS_HELP_STRING([--with-ppl-include=PATH],
+ [specify directory for installed PPL include files])])
+AC_ARG_WITH(ppl-lib,
+[AS_HELP_STRING([--with-ppl-lib=PATH],
+ [specify directory for the installed PPL library])])
-AC_ARG_WITH(ppl, [ --with-ppl=PATH Specify prefix directory for the installed PPL package
- Equivalent to --with-ppl-include=PATH/include
- plus --with-ppl-lib=PATH/lib])
-AC_ARG_WITH(ppl-include, [ --with-ppl-include=PATH Specify directory for installed PPL include files])
-AC_ARG_WITH(ppl-lib, [ --with-ppl-lib=PATH Specify the directory for the installed PPL library])
+AC_ARG_ENABLE(ppl-version-check,
+[AS_HELP_STRING([--disable-ppl-version-check],
+ [disable check for PPL version])])
-case $with_ppl in
- no)
- ppllibs=
- ;;
- "" | yes)
+case $with_ppl in
+ yes | no | "")
;;
*)
- ppllibs="-L$with_ppl/lib -lppl_c -lppl -lgmpxx"
+ ppllibs="-L$with_ppl/lib"
pplinc="-I$with_ppl/include $pplinc"
+ if test -d "$with_ppl/lib" && test -d "$with_ppl/include"; then
+ with_ppl=yes
+ else
+ AC_MSG_ERROR([cannot find directories "$with_ppl/lib" or "$with_ppl/include"])
+ fi
;;
esac
-if test "x$with_ppl_include" != x; then
+
+if test x"$with_ppl_include" != x; then
pplinc="-I$with_ppl_include $pplinc"
+ with_ppl=yes
fi
+
if test "x$with_ppl_lib" != x; then
- ppllibs="-L$with_ppl_lib -lppl_c -lppl -lgmpxx"
+ ppllibs="-L$with_ppl_lib"
+ with_ppl=yes
fi
-if test "x$with_ppl$with_ppl_include$with_ppl_lib" = x && test -d ${srcdir}/ppl; then
- ppllibs='-L$$r/$(HOST_SUBDIR)/ppl/interfaces/C/'"$lt_cv_objdir"' -L$$r/$(HOST_SUBDIR)/ppl/src/'"$lt_cv_objdir"' -lppl_c -lppl -lgmpxx '
+
+if test x"$with_ppl$with_ppl_include$with_ppl_lib" = x && test -d ${srcdir}/ppl; then
+ if test x"$enable_watchdog" = xyes; then
+ pwllib="-lpwl"
+ fi
+ ppllibs='-L$$r/$(HOST_SUBDIR)/ppl/interfaces/C/'"$lt_cv_objdir"' -L$$r/$(HOST_SUBDIR)/ppl/src/'"$lt_cv_objdir"
pplinc='-I$$r/$(HOST_SUBDIR)/ppl/src -I$$r/$(HOST_SUBDIR)/ppl/interfaces/C '
enable_ppl_version_check=no
+ with_ppl=yes
fi
-AC_ARG_ENABLE(ppl-version-check,
-[ --disable-ppl-version-check disable check for PPL version],
-ENABLE_PPL_CHECK=$enableval,
-ENABLE_PPL_CHECK=yes)
+if test "x$with_ppl" != xno; then
+ if test "x$pwllib" = x; then
+ saved_LIBS="$LIBS"
+ LIBS="$LIBS $ppllibs -lstdc++ -lm"
+ AC_CHECK_LIB(pwl, PWL_handle_timeout, [pwllib="-lpwl"])
+ LIBS="$saved_LIBS"
+ fi
-if test "x$with_ppl" != "xno" -a "${ENABLE_PPL_CHECK}" = "yes"; then
- saved_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS $pplinc $gmpinc"
- AC_MSG_CHECKING([for version 0.10 (or later revision) of PPL])
- AC_TRY_COMPILE([#include "ppl_c.h"],[
- #if PPL_VERSION_MAJOR != 0 || PPL_VERSION_MINOR < 10
- choke me
- #endif
- ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); ppllibs= ; pplinc= ; with_ppl=no ])
- CFLAGS="$saved_CFLAGS"
+ ppllibs="$ppllibs -lppl_c -lppl $pwllib -lgmpxx"
+
+ if test "$enable_ppl_version_check" != no; then
+ saved_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $pplinc $gmpinc"
+ AC_MSG_CHECKING([for version 0.11 (revision 0 or later) of PPL])
+ AC_TRY_COMPILE([#include "ppl_c.h"],[
+ #if PPL_VERSION_MAJOR != 0 || PPL_VERSION_MINOR < 11
+ choke me
+ #endif
+ ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); ppllibs= ; pplinc= ; with_ppl=no ])
+ CFLAGS="$saved_CFLAGS"
+ fi
fi
# Flags needed for PPL
dnl with user input.
CLOOG_INIT_FLAGS
if test "x$with_ppl" = "xno"; then
+ dnl Only execute fail-action, if CLooG has been requested.
+ CLOOG_REQUESTED([graphite_requested=yes], [graphite_requested=no])
+ if test "${graphite_requested}" = yes; then
+ AC_MSG_ERROR([Unable to find a usable PPL. See config.log for details.])
+ fi
with_cloog=no
fi
if test "x${with_cloog}" = x && test "x${with_cloog_include}" = x \
clooginc='-I$$r/$(HOST_SUBDIR)/cloog/include -I$$s/cloog/include '
fi
if test "x$with_cloog" != "xno"; then
- dnl Version check for CLooG-Org
- dnl As long as there is no new release of CLooG,
- dnl we will check for 0.14.0.
+ dnl The minimal version of CLooG required for Graphite.
dnl
- dnl The first git revision that will work with
- dnl GCC is: bd91b845a65805c290d43fc1bef8139864a163fb
- dnl This is enforced implictly, as this is the commit that
- dnl introduced the versioning information used within our
- dnl checks.
- dnl
- dnl If we're using CLooG-Legacy, the provided version information
- dnl will be ignored.
- CLOOG_CHECK_VERSION(0,14,0)
+ dnl If we use CLooG-Legacy, the provided version information is
+ dnl ignored.
+ CLOOG_CHECK_VERSION(0,16,1)
- dnl Only execute fail-action, if CLooG has been
- dnl requested.
+ dnl Only execute fail-action, if CLooG has been requested.
CLOOG_IF_FAILED([
- AC_MSG_ERROR([Unable to find a usable CLooG. See config.log for details.])])
+ AC_MSG_ERROR([Unable to find a usable CLooG. See config.log for details.])])
fi
# Check for LTO support.
AC_ARG_ENABLE(lto,
-[ --enable-lto enable link time optimization support],
+[AS_HELP_STRING([--enable-lto], [enable link time optimization support])],
enable_lto=$enableval,
enable_lto=yes; default_enable_lto=yes)
build_lto_plugin=yes
],[if test x"$default_enable_lto" = x"yes" ; then
case $target in
- *-apple-darwin* | *-cygwin* | *-mingw*) ;;
+ *-apple-darwin9 | *-cygwin* | *-mingw*) ;;
# On other non-ELF platforms, LTO has yet to be validated.
*) enable_lto=no ;;
esac
# an apparent bug in bash 1.12 on linux.
${srcdir}/gcc/[[*]]/config-lang.in) ;;
*)
- # From the config-lang.in, get $language, $lang_requires
+ # From the config-lang.in, get $language, $lang_requires, and
+ # $lang_requires_boot_languages.
language=
lang_requires=
+ lang_requires_boot_languages=
. ${lang_frag}
- for other in ${lang_requires} ; do
+ for other in ${lang_requires} ${lang_requires_boot_languages}; do
case ,${enable_languages}, in
*,$other,*) ;;
*,all,*) ;;
;;
esac
done
+ for other in ${lang_requires_boot_languages} ; do
+ if test "$other" != "c"; then
+ case ,${enable_stage1_languages}, in
+ *,$other,*) ;;
+ *,all,*) ;;
+ *)
+ case ,${enable_languages}, in
+ *,$language,*)
+ echo " '$other' language required by '$language' in stage 1; enabling" 1>&2
+ enable_stage1_languages="$enable_stage1_languages,${other}"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ done
;;
esac
done
missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ `
potential_languages=,c,
+ enabled_target_libs=
+ disabled_target_libs=
+
for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
case ${lang_frag} in
..) ;;
case $add_this_lang in
unsupported)
# Remove language-dependent dirs.
- eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
+ disabled_target_libs="$disabled_target_libs $target_libs"
+ noconfigdirs="$noconfigdirs $lang_dirs"
;;
no)
# Remove language-dependent dirs; still show language as supported.
- eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
+ disabled_target_libs="$disabled_target_libs $target_libs"
+ noconfigdirs="$noconfigdirs $lang_dirs"
potential_languages="${potential_languages}${language},"
;;
yes)
new_enable_languages="${new_enable_languages}${language},"
potential_languages="${potential_languages}${language},"
missing_languages=`echo "$missing_languages" | sed "s/,$language,/,/"`
+ enabled_target_libs="$enabled_target_libs $target_libs"
case "${boot_language}:,$enable_stage1_languages," in
yes:* | *:*,$language,* | *:*,yes, | *:*,all,)
# Add to (comma-separated) list of stage 1 languages.
esac
done
+ # Add target libraries which are only needed for disabled languages
+ # to noconfigdirs.
+ if test -n "$disabled_target_libs"; then
+ for dir in $disabled_target_libs; do
+ case " $enabled_target_libs " in
+ *" ${dir} "*) ;;
+ *) noconfigdirs="$noconfigdirs $dir" ;;
+ esac
+ done
+ fi
+
AC_ARG_ENABLE(stage1-languages,
-[ --enable-stage1-languages@<:@=all@:>@ choose additional languages to build during
- stage1. Mostly useful for compiler development.],
+ [AS_HELP_STRING([[--enable-stage1-languages[=all]]],
+ [choose additional languages to build during
+ stage1. Mostly useful for compiler development])],
[case ,${enable_stage1_languages}, in
,no,|,,)
# Set it to something that will have no effect in the loop below
# Check for Boehm's garbage collector
AC_ARG_ENABLE(objc-gc,
-[ --enable-objc-gc enable use of Boehm's garbage collector with the
- GNU Objective-C runtime],
+[AS_HELP_STRING([--enable-objc-gc],
+ [enable use of Boehm's garbage collector with the
+ GNU Objective-C runtime])],
[case ,${enable_languages},:${enable_objc_gc}:${noconfigdirs} in
*,objc,*:*:yes:*target-boehm-gc*)
AC_MSG_ERROR([Boehm's garbage collector was requested yet not supported in this configuration])
copy_dirs=
AC_ARG_WITH([build-sysroot],
- [ --with-build-sysroot=SYSROOT
- use sysroot as the system root during the build],
+ [AS_HELP_STRING([--with-build-sysroot=SYSROOT],
+ [use sysroot as the system root during the build])],
[if test x"$withval" != x ; then
SYSROOT_CFLAGS_FOR_TARGET="--sysroot=$withval"
fi],
AC_SUBST(SYSROOT_CFLAGS_FOR_TARGET)
AC_ARG_WITH([debug-prefix-map],
- [ --with-debug-prefix-map='A=B C=D ...'
- map A to B, C to D ... in debug information],
+ [AS_HELP_STRING([--with-debug-prefix-map='A=B C=D ...'],
+ [map A to B, C to D ... in debug information])],
[if test x"$withval" != x; then
DEBUG_PREFIX_CFLAGS_FOR_TARGET=
for debug_map in $withval; do
extra_ranlibflags_for_target=
target_makefile_frag=/dev/null
case "${target}" in
- mep*-*-*)
- target_makefile_frag="config/mt-mep"
- ;;
spu-*-*)
target_makefile_frag="config/mt-spu"
;;
mips*-*-*linux* | mips*-*-gnu*)
target_makefile_frag="config/mt-mips-gnu"
;;
- *-*-netware*)
- target_makefile_frag="config/mt-netware"
- ;;
*-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
target_makefile_frag="config/mt-gnu"
;;
# ranlib before Darwin10 requires the -c flag to look at common symbols.
extra_ranlibflags_for_target=" -c"
;;
- mips*-*-pe | sh*-*-pe | *arm-wince-pe)
- target_makefile_frag="config/mt-wince"
- ;;
esac
alphaieee_frag=/dev/null
# Decide which environment variable is used to find dynamic libraries.
case "${host}" in
*-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
- *-*-darwin* | *-*-rhapsody* ) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
+ *-*-darwin*) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
*-*-mingw* | *-*-cygwin ) RPATH_ENVVAR=PATH ;;
*) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
esac
# Do not nest @if/@endif pairs, because configure will not warn you at all.
AC_ARG_ENABLE([bootstrap],
-[ --enable-bootstrap enable bootstrapping @<:@yes if native build@:>@],,
+[AS_HELP_STRING([--enable-bootstrap],
+ [enable bootstrapping @<:@yes if native build@:>@])],,
enable_bootstrap=default)
# Issue errors and warnings for invalid/strange bootstrap combinations.
AC_MSG_CHECKING(for default BUILD_CONFIG)
AC_ARG_WITH([build-config],
- [--with-build-config='NAME NAME2...'
- Use config/NAME.mk build configuration],
+ [AS_HELP_STRING([--with-build-config='NAME NAME2...'],
+ [use config/NAME.mk build configuration])],
[case $with_build_config in
yes) with_build_config= ;;
no) with_build_config= BUILD_CONFIG= ;;
# Create the serialization dependencies. This uses a temporary file.
AC_ARG_ENABLE([serial-configure],
-[ --enable-serial-@<:@{host,target,build}-@:>@configure
- force sequential configuration of
- sub-packages for the host, target or build
- machine, or all sub-packages])
+[AS_HELP_STRING([[--enable-serial-[{host,target,build}-]configure]],
+ [force sequential configuration of
+ sub-packages for the host, target or build
+ machine, or all sub-packages])])
case ${enable_serial_configure} in
yes)
# Also strip program-prefix, program-suffix, and program-transform-name,
# so that we can pass down a consistent program-transform-name.
baseargs=
+tbaseargs=
keep_next=no
skip_next=no
eval "set -- $ac_configure_args"
ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
baseargs="$baseargs '$ac_arg'"
+ tbaseargs="$tbaseargs '$ac_arg'"
keep_next=no
continue
fi
;;
esac
+ skip_targ=no
+ case $ac_arg in
+changequote(,)
+ --with-* | --without-*)
+ libopt=`echo "$ac_arg" | sed -e 's,^--[^-_]*[-_],,' -e 's,=.*$,,'`
+
+ case $libopt in
+ *[-_]include)
+ lib=`echo "$libopt" | sed 's,[-_]include$,,'`
+ ;;
+ *[-_]lib)
+ lib=`echo "$libopt" | sed 's,[-_]lib$,,'`
+ ;;
+ *)
+ lib=$libopt
+ ;;
+ esac
+changequote([,])
+
+ case $lib in
+ mpc | mpfr | gmp | ppl | cloog)
+ # If we're processing --with-$lib, --with-$lib-include or
+ # --with-$lib-lib, for one of the libs above, and target is
+ # different from host, don't pass the current argument to any
+ # target library's configure.
+ if test x$is_cross_compiler = xyes; then
+ skip_targ=yes
+ fi
+ ;;
+ esac
+ ;;
+ esac
+
case "$ac_arg" in
--cache-file=/dev/null | \
-cache-file=/dev/null )
# Handled here to avoid the test to skip args below.
baseargs="$baseargs '$ac_arg'"
+ tbaseargs="$tbaseargs '$ac_arg'"
# Assert: $separate_arg should always be no.
keep_next=$separate_arg
;;
ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
baseargs="$baseargs '$ac_arg'"
+ if test X"$skip_targ" = Xno; then
+ tbaseargs="$tbaseargs '$ac_arg'"
+ fi
keep_next=$separate_arg
;;
*)
gcc_transform_name=`cat conftestsed.out`
rm -f conftestsed.out
baseargs="$baseargs --program-transform-name='${gcc_transform_name}'"
+tbaseargs="$tbaseargs --program-transform-name='${gcc_transform_name}'"
if test "$silent" = yes; then
baseargs="$baseargs --silent"
+ tbaseargs="$tbaseargs --silent"
fi
baseargs="$baseargs --disable-option-checking"
+tbaseargs="$tbaseargs --disable-option-checking"
# Record and document user additions to sub configure arguments.
AC_ARG_VAR([build_configargs],
# This seems to be due to autoconf 2.5x stupidity.
host_configargs="$host_configargs --cache-file=./config.cache ${extra_host_args} ${baseargs}"
-target_configargs="$target_configargs ${baseargs}"
+target_configargs="$target_configargs ${tbaseargs}"
# Passing a --with-cross-host argument lets the target libraries know
# whether they are being built with a cross-compiler or being built
AC_SUBST(DLLTOOL_FOR_BUILD)
AC_SUBST(GCJ_FOR_BUILD)
AC_SUBST(GFORTRAN_FOR_BUILD)
+AC_SUBST(GOC_FOR_BUILD)
AC_SUBST(LDFLAGS_FOR_BUILD)
AC_SUBST(LD_FOR_BUILD)
AC_SUBST(NM_FOR_BUILD)
# Target tools.
AC_ARG_WITH([build-time-tools],
- [ --with-build-time-tools=PATH
- use given path to find target tools during the build],
+ [AS_HELP_STRING([--with-build-time-tools=PATH],
+ [use given path to find target tools during the build])],
[case x"$withval" in
x/*) ;;
*)
NCN_STRICT_CHECK_TARGET_TOOLS(GCC_FOR_TARGET, gcc, ${CC_FOR_TARGET})
NCN_STRICT_CHECK_TARGET_TOOLS(GCJ_FOR_TARGET, gcj)
NCN_STRICT_CHECK_TARGET_TOOLS(GFORTRAN_FOR_TARGET, gfortran)
+NCN_STRICT_CHECK_TARGET_TOOLS(GOC_FOR_TARGET, gccgo)
ACX_CHECK_INSTALLED_TARGET_TOOL(AR_FOR_TARGET, ar)
ACX_CHECK_INSTALLED_TARGET_TOOL(AS_FOR_TARGET, as)
GCC_TARGET_TOOL(ar, AR_FOR_TARGET, AR, [binutils/ar])
GCC_TARGET_TOOL(as, AS_FOR_TARGET, AS, [gas/as-new])
GCC_TARGET_TOOL(cc, CC_FOR_TARGET, CC, [gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/])
+dnl see comments for CXX_FOR_TARGET_FLAG_TO_PASS
GCC_TARGET_TOOL(c++, CXX_FOR_TARGET, CXX,
- [gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs],
+ [gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `if test -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags; then $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes; else echo -funconfigured-libstdc++-v3 ; fi` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs],
c++)
GCC_TARGET_TOOL(c++ for libstdc++, RAW_CXX_FOR_TARGET, CXX,
[gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs],
[gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc/], java)
GCC_TARGET_TOOL(gfortran, GFORTRAN_FOR_TARGET, GFORTRAN,
[gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc/], fortran)
+GCC_TARGET_TOOL(gccgo, GOC_FOR_TARGET, GOC,
+ [gcc/gccgo -B$$r/$(HOST_SUBDIR)/gcc/], go)
GCC_TARGET_TOOL(ld, LD_FOR_TARGET, LD, [ld/ld-new])
GCC_TARGET_TOOL(lipo, LIPO_FOR_TARGET, LIPO)
GCC_TARGET_TOOL(nm, NM_FOR_TARGET, NM, [binutils/nm-new])
GCC_TARGET_TOOL(objdump, OBJDUMP_FOR_TARGET, OBJDUMP, [binutils/objdump])
GCC_TARGET_TOOL(ranlib, RANLIB_FOR_TARGET, RANLIB, [binutils/ranlib])
-GCC_TARGET_TOOL(strip, STRIP_FOR_TARGET, STRIP, [binutils/strip])
+GCC_TARGET_TOOL(strip, STRIP_FOR_TARGET, STRIP, [binutils/strip-new])
GCC_TARGET_TOOL(windres, WINDRES_FOR_TARGET, WINDRES, [binutils/windres])
GCC_TARGET_TOOL(windmc, WINDMC_FOR_TARGET, WINDMC, [binutils/windmc])
AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
AC_ARG_ENABLE(maintainer-mode,
-[ --enable-maintainer-mode enable make rules and dependencies not useful
- (and sometimes confusing) to the casual installer],
+[AS_HELP_STRING([--enable-maintainer-mode],
+ [enable make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer])],
USE_MAINTAINER_MODE=$enableval,
USE_MAINTAINER_MODE=no)
AC_MSG_RESULT($USE_MAINTAINER_MODE)
# Enable --enable-checking in stage1 of the compiler.
AC_ARG_ENABLE(stage1-checking,
-[ --enable-stage1-checking@<:@=all@:>@ choose additional checking for stage1
- of the compiler],
+[AS_HELP_STRING([[--enable-stage1-checking[=all]]],
+ [choose additional checking for stage1 of the compiler])],
[stage1_checking=--enable-checking=${enable_stage1_checking}],
[if test "x$enable_checking" = xno || test "x$enable_checking" = x; then
stage1_checking=--enable-checking=yes,types
# Enable -Werror in bootstrap stage2 and later.
AC_ARG_ENABLE(werror,
-[ --enable-werror enable -Werror in bootstrap stage2 and later], [],
+[AS_HELP_STRING([--enable-werror],
+ [enable -Werror in bootstrap stage2 and later])], [],
[if test -d ${srcdir}/gcc && test x"`cat $srcdir/gcc/DEV-PHASE`" = xexperimental; then
enable_werror=yes
else