# Autoconf M4 include file defining utility macros for complex Canadian
# cross builds.
+dnl ####
+dnl # _GCC_TOPLEV_NONCANONICAL_BUILD
+dnl # $build_alias or canonical $build if blank.
+dnl # Used when we would use $build_alias, but empty is not OK.
+AC_DEFUN([_GCC_TOPLEV_NONCANONICAL_BUILD],
+[AC_REQUIRE([AC_CANONICAL_BUILD]) []dnl
+case ${build_alias} in
+ "") build_noncanonical=${build} ;;
+ *) build_noncanonical=${build_alias} ;;
+esac
+]) []dnl # _GCC_TOPLEV_NONCANONICAL_BUILD
+
+dnl ####
+dnl # _GCC_TOPLEV_NONCANONICAL_HOST
+dnl # $host_alias, or $build_noncanonical if blank.
+dnl # Used when we would use $host_alias, but empty is not OK.
+AC_DEFUN([_GCC_TOPLEV_NONCANONICAL_HOST],
+[AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_BUILD]) []dnl
+case ${host_alias} in
+ "") host_noncanonical=${build_noncanonical} ;;
+ *) host_noncanonical=${host_alias} ;;
+esac
+]) []dnl # _GCC_TOPLEV_NONCANONICAL_HOST
+
+dnl ####
+dnl # _GCC_TOPLEV_NONCANONICAL_TARGET
+dnl # $target_alias or $host_noncanonical if blank.
+dnl # Used when we would use $target_alias, but empty is not OK.
+AC_DEFUN([_GCC_TOPLEV_NONCANONICAL_TARGET],
+[AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_HOST]) []dnl
+case ${target_alias} in
+ "") target_noncanonical=${host_noncanonical} ;;
+ *) target_noncanonical=${target_alias} ;;
+esac
+]) []dnl # _GCC_TOPLEV_NONCANONICAL_TARGET
+
+dnl ####
+dnl # ACX_NONCANONICAL_BUILD
+dnl # Like underscored version, but AC_SUBST's.
+AC_DEFUN([ACX_NONCANONICAL_BUILD],
+[AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_BUILD]) []dnl
+AC_SUBST(build_noncanonical)
+]) []dnl # ACX_NONCANONICAL_BUILD
+
+dnl ####
+dnl # ACX_NONCANONICAL_HOST
+dnl # Like underscored version, but AC_SUBST's.
+AC_DEFUN([ACX_NONCANONICAL_HOST],
+[AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_HOST]) []dnl
+AC_SUBST(host_noncanonical)
+]) []dnl # ACX_NONCANONICAL_HOST
+
+dnl ####
+dnl # ACX_NONCANONICAL_TARGET
+dnl # Like underscored version, but AC_SUBST's.
+AC_DEFUN([ACX_NONCANONICAL_TARGET],
+[AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_TARGET]) []dnl
+AC_SUBST(target_noncanonical)
+]) []dnl # ACX_NONCANONICAL_TARGET
+
+dnl ####
+dnl # GCC_TOPLEV_SUBDIRS
+dnl # GCC & friends build 'build', 'host', and 'target' tools. These must
+dnl # be separated into three well-known subdirectories of the build directory:
+dnl # build_subdir, host_subdir, and target_subdir. The values are determined
+dnl # here so that they can (theoretically) be changed in the future. They
+dnl # were previously reproduced across many different files.
+dnl #
+dnl # This logic really amounts to very little with autoconf 2.13; it will
+dnl # amount to a lot more with autoconf 2.5x.
+AC_DEFUN([GCC_TOPLEV_SUBDIRS],
+[AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_TARGET]) []dnl
+AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_BUILD]) []dnl
+
+# post-stage1 host modules use a different CC_FOR_BUILD so, in order to
+# have matching libraries, they should use host libraries: Makefile.tpl
+# arranges to pass --with-build-libsubdir=$(HOST_SUBDIR).
+# However, they still use the build modules, because the corresponding
+# host modules (e.g. bison) are only built for the host when bootstrap
+# finishes. So:
+# - build_subdir is where we find build modules, and never changes.
+# - build_libsubdir is where we find build libraries, and can be overridden.
+
+# Prefix 'build-' so this never conflicts with target_subdir.
+build_subdir="build-${build_noncanonical}"
+AC_ARG_WITH(build-libsubdir,
+[ --with-build-libsubdir=[DIR] Directory where to find libraries for build system],
+build_libsubdir="$withval",
+build_libsubdir="$build_subdir")
+# --srcdir=. covers the toplevel, while "test -d" covers the subdirectories
+if ( test $srcdir = . && test -d gcc ) \
+ || test -d $srcdir/../host-${host_noncanonical}; then
+ host_subdir="host-${host_noncanonical}"
+else
+ host_subdir=.
+fi
+# No prefix.
+target_subdir=${target_noncanonical}
+AC_SUBST([build_libsubdir]) []dnl
+AC_SUBST([build_subdir]) []dnl
+AC_SUBST([host_subdir]) []dnl
+AC_SUBST([target_subdir]) []dnl
+]) []dnl # GCC_TOPLEV_SUBDIRS
+
+
####
# _NCN_TOOL_PREFIXES: Some stuff that oughtta be done in AC_CANONICAL_SYSTEM
# or AC_INIT.
]) []dnl # _NCN_TOOL_PREFIXES
####
-# NCN_CHECK_TARGET_TOOL(variable, prog-to-check-for,[value-if-not-found],[path])
-# Like AC_CHECK_TOOL, but tries a prefix of the target, not the host.
-# Code is pretty much lifted from autoconf2.53.
+# NCN_STRICT_CHECK_TOOLS(variable, progs-to-check-for,[value-if-not-found],[path])
+# Like plain AC_CHECK_TOOLS, but require prefix if build!=host.
-AC_DEFUN([NCN_CHECK_TARGET_TOOL],
+AC_DEFUN([NCN_STRICT_CHECK_TOOLS],
[AC_REQUIRE([_NCN_TOOL_PREFIXES]) []dnl
-if test -n "$ncn_target_tool_prefix"; then
- AC_CHECK_PROG([$1], [${ncn_target_tool_prefix}$2],
- [${ncn_target_tool_prefix}$2], , [$4])
+AC_ARG_VAR([$1], [$1 for the host])
+
+if test -n "[$]$1"; then
+ ac_cv_prog_$1=[$]$1
+elif test -n "$ac_cv_prog_$1"; then
+ $1=$ac_cv_prog_$1
fi
-if test -z "$ac_cv_prog_$1" ; then
- ncn_cv_$1=$$1
- AC_CHECK_PROG([ncn_cv_$1], [$2], [$2], [$3], [$4])
- $1=$ncn_cv_$1
-else
- $1="$ac_cv_prog_$1"
+
+if test -n "$ac_cv_prog_$1"; then
+ for ncn_progname in $2; do
+ AC_CHECK_PROG([$1], [${ncn_progname}], [${ncn_progname}], , [$4])
+ done
fi
-]) []dnl # NCN_CHECK_TARGET_TOOL
+for ncn_progname in $2; do
+ if test -n "$ncn_tool_prefix"; then
+ AC_CHECK_PROG([$1], [${ncn_tool_prefix}${ncn_progname}],
+ [${ncn_tool_prefix}${ncn_progname}], , [$4])
+ fi
+ if test -z "$ac_cv_prog_$1" && test $build = $host ; then
+ AC_CHECK_PROG([$1], [${ncn_progname}], [${ncn_progname}], , [$4])
+ fi
+ test -n "$ac_cv_prog_$1" && break
+done
+
+if test -z "$ac_cv_prog_$1" ; then
+ ifelse([$3],[], [set dummy $2
+ if test $build = $host ; then
+ $1="[$]2"
+ else
+ $1="${ncn_tool_prefix}[$]2"
+ fi], [$1="$3"])
+fi
+]) []dnl # NCN_STRICT_CHECK_TOOLS
####
-# NCN_STRICT_CHECK_TOOL(variable, prog-to-check-for,[value-if-not-found],[path])
-# Like AC_CHECK_TOOL, but requires the prefix if build!=host.
+# NCN_STRICT_CHECK_TARGET_TOOLS(variable, progs-to-check-for,[value-if-not-found],[path])
+# Like CVS Autoconf AC_CHECK_TARGET_TOOLS, but require prefix if build!=target.
-AC_DEFUN([NCN_STRICT_CHECK_TOOL],
+AC_DEFUN([NCN_STRICT_CHECK_TARGET_TOOLS],
[AC_REQUIRE([_NCN_TOOL_PREFIXES]) []dnl
-if test -n "$ncn_tool_prefix"; then
- AC_CHECK_PROG([$1], [${ncn_tool_prefix}$2],
- [${ncn_tool_prefix}$2], , [$4])
+AC_ARG_VAR([$1], patsubst([$1], [_FOR_TARGET$], [])[ for the target])
+
+if test -n "[$]$1"; then
+ ac_cv_prog_$1=[$]$1
+elif test -n "$ac_cv_prog_$1"; then
+ $1=$ac_cv_prog_$1
+fi
+
+if test -n "$ac_cv_prog_$1"; then
+ for ncn_progname in $2; do
+ AC_CHECK_PROG([$1], [${ncn_progname}], [${ncn_progname}], , [$4])
+ done
+fi
+
+if test -z "$ac_cv_prog_$1" && test -n "$with_build_time_tools"; then
+ for ncn_progname in $2; do
+ AC_MSG_CHECKING([for ${ncn_progname} in $with_build_time_tools])
+ if test -x $with_build_time_tools/${ncn_progname}; then
+ ac_cv_prog_$1=$with_build_time_tools/${ncn_progname}
+ AC_MSG_RESULT(yes)
+ break
+ else
+ AC_MSG_RESULT(no)
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_$1"; then
+ for ncn_progname in $2; do
+ if test -n "$ncn_target_tool_prefix"; then
+ AC_CHECK_PROG([$1], [${ncn_target_tool_prefix}${ncn_progname}],
+ [${ncn_target_tool_prefix}${ncn_progname}], , [$4])
+ fi
+ if test -z "$ac_cv_prog_$1" && test $build = $target ; then
+ AC_CHECK_PROG([$1], [${ncn_progname}], [${ncn_progname}], , [$4])
+ fi
+ test -n "$ac_cv_prog_$1" && break
+ done
fi
+
if test -z "$ac_cv_prog_$1" ; then
- if test $build = $host ; then
- ncn_cv_$1=$$1
- AC_CHECK_PROG([ncn_cv_$1], [$2], [$2], [ifelse([$3],[],[$2],[$3])], [$4])
- $1=$ncn_cv_$1
+ ifelse([$3],[], [set dummy $2
+ if test $build = $target ; then
+ $1="[$]2"
else
- $1="ifelse([$3],[],[${ncn_tool_prefix}$2],[$3])"
- fi
+ $1="${ncn_target_tool_prefix}[$]2"
+ fi], [$1="$3"])
else
$1="$ac_cv_prog_$1"
fi
-]) []dnl # NCN_STRICT_CHECK_TOOL
+]) []dnl # NCN_STRICT_CHECK_TARGET_TOOLS
+
+# Backported from Autoconf 2.5x; can go away when and if
+# we switch. Put the OS path separator in $PATH_SEPARATOR.
+AC_DEFUN([ACX_PATH_SEP], [
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+])
-####
-# NCN_STRICT_CHECK_TARGET_TOOL(variable, prog-to-check-for,[value-if-not-found],[path])
-# Like NCN_CHECK_TARGET_TOOL, but requires the prefix if build!=target.
-AC_DEFUN([NCN_STRICT_CHECK_TARGET_TOOL],
-[AC_REQUIRE([_NCN_TOOL_PREFIXES]) []dnl
-if test -n "$ncn_target_tool_prefix"; then
- AC_CHECK_PROG([$1], [${ncn_target_tool_prefix}$2],
- [${ncn_target_tool_prefix}$2], , [$4])
+AC_DEFUN([ACX_TOOL_DIRS], [
+AC_REQUIRE([ACX_PATH_SEP])
+if test "x$exec_prefix" = xNONE; then
+ if test "x$prefix" = xNONE; then
+ gcc_cv_tool_prefix=$ac_default_prefix
+ else
+ gcc_cv_tool_prefix=$prefix
+ fi
+else
+ gcc_cv_tool_prefix=$exec_prefix
fi
-if test -z "$ac_cv_prog_$1" ; then
- if test $build = $target ; then
- ncn_cv_$1=$$1
- AC_CHECK_PROG([ncn_cv_$1], [$2], [$2], [ifelse([$3],[],[$2],[$3])], [$4])
- $1=$ncn_cv_$1
+
+# If there is no compiler in the tree, use the PATH only. In any
+# case, if there is no compiler in the tree nobody should use
+# AS_FOR_TARGET and LD_FOR_TARGET.
+if test x$host = x$build && test -f $srcdir/gcc/BASE-VER; then
+ gcc_version=`cat $srcdir/gcc/BASE-VER`
+ gcc_cv_tool_dirs="$gcc_cv_tool_prefix/libexec/gcc/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/libexec/gcc/$target_noncanonical$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs/usr/lib/gcc/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs/usr/lib/gcc/$target_noncanonical$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/$target_noncanonical/bin/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/$target_noncanonical/bin$PATH_SEPARATOR"
+else
+ gcc_cv_tool_dirs=
+fi
+
+if test x$build = x$target && test -n "$md_exec_prefix"; then
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs$md_exec_prefix$PATH_SEPARATOR"
+fi
+
+]) []dnl # ACX_TOOL_DIRS
+
+# ACX_HAVE_GCC_FOR_TARGET
+# Check if the variable GCC_FOR_TARGET really points to a GCC binary.
+AC_DEFUN([ACX_HAVE_GCC_FOR_TARGET], [
+cat > conftest.c << \EOF
+#ifdef __GNUC__
+ gcc_yay;
+#endif
+EOF
+if ($GCC_FOR_TARGET -E conftest.c | grep gcc_yay) > /dev/null 2>&1; then
+ have_gcc_for_target=yes
+else
+ GCC_FOR_TARGET=${ncn_target_tool_prefix}gcc
+ have_gcc_for_target=no
+fi
+rm conftest.c
+])
+
+# ACX_CHECK_INSTALLED_TARGET_TOOL(VAR, PROG)
+# Searching for installed target binutils. We need to take extra care,
+# else we may find the wrong assembler, linker, etc., and lose.
+#
+# First try --with-build-time-tools, if specified.
+#
+# For build != host, we ask the installed GCC for the name of the tool it
+# uses, and accept it if it is an absolute path. This is because the
+# only good choice for a compiler is the same GCC version that is being
+# installed (or we couldn't make target libraries), and we assume that
+# on the host system we'll have not only the same GCC version, but also
+# the same binutils version.
+#
+# For build == host, search the same directories that the installed
+# compiler will search. We used to do this for the assembler, linker,
+# and nm only; for simplicity of configuration, however, we extend this
+# criterion to tools (such as ar and ranlib) that are never invoked by
+# the compiler, to avoid mismatches.
+#
+# Also note we have to check MD_EXEC_PREFIX before checking the user's path
+# if build == target. This makes the most sense only when bootstrapping,
+# but we also do so when build != host. In this case, we hope that the
+# build and host systems will have similar contents of MD_EXEC_PREFIX.
+#
+# If we do not find a suitable binary, then try the user's path.
+
+AC_DEFUN([ACX_CHECK_INSTALLED_TARGET_TOOL], [
+AC_REQUIRE([ACX_TOOL_DIRS])
+AC_REQUIRE([ACX_HAVE_GCC_FOR_TARGET])
+if test -z "$ac_cv_path_$1" ; then
+ if test -n "$with_build_time_tools"; then
+ AC_MSG_CHECKING([for $2 in $with_build_time_tools])
+ if test -x $with_build_time_tools/$2; then
+ $1=`cd $with_build_time_tools && pwd`/$2
+ ac_cv_path_$1=[$]$1
+ AC_MSG_RESULT([$ac_cv_path_$1])
+ else
+ AC_MSG_RESULT(no)
+ fi
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ $1=`$GCC_FOR_TARGET --print-prog-name=$2`
+ test [$]$1 = $2 && $1=
+ test -n "[$]$1" && ac_cv_path_$1=[$]$1
+ fi
+fi
+if test -z "$ac_cv_path_$1" && test -n "$gcc_cv_tool_dirs"; then
+ AC_PATH_PROG([$1], [$2], [], [$gcc_cv_tool_dirs])
+fi
+if test -z "$ac_cv_path_$1" ; then
+ NCN_STRICT_CHECK_TARGET_TOOLS([$1], [$2])
+else
+ $1=$ac_cv_path_$1
+fi
+]) []dnl # ACX_CHECK_INSTALLED_TARGET_TOOL
+
+###
+# AC_PROG_CPP_WERROR
+# Used for autoconf 2.5x to force AC_PREPROC_IFELSE to reject code which
+# triggers warnings from the preprocessor. Will be in autoconf 2.58.
+# For now, using this also overrides header checks to use only the
+# preprocessor (matches 2.13 behavior; matching 2.58's behavior is a
+# bit harder from here).
+# Eventually autoconf will default to checking headers with the compiler
+# instead, and we'll have to do this differently.
+
+AC_DEFUN([AC_PROG_CPP_WERROR],
+[AC_REQUIRE([AC_PROG_CPP])dnl
+m4_define([AC_CHECK_HEADER],m4_defn([_AC_CHECK_HEADER_OLD]))
+ac_c_preproc_warn_flag=yes])# AC_PROG_CPP_WERROR
+
+# Test for GNAT.
+# We require the gnatbind program, and a compiler driver that
+# understands Ada. We use the user's CC setting, already found,
+# and possibly add $1 to the command-line parameters.
+#
+# Sets the shell variable have_gnat to yes or no as appropriate, and
+# substitutes GNATBIND and GNATMAKE.
+AC_DEFUN([ACX_PROG_GNAT],
+[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])
+AC_REQUIRE([AC_PROG_CC])
+AC_CHECK_TOOL(GNATBIND, gnatbind, no)
+AC_CHECK_TOOL(GNATMAKE, gnatmake, no)
+AC_CACHE_CHECK([whether compiler driver understands Ada],
+ acx_cv_cc_gcc_supports_ada,
+[cat >conftest.adb <<EOF
+procedure conftest is begin null; end conftest;
+EOF
+acx_cv_cc_gcc_supports_ada=no
+# There is a bug in old released versions of GCC which causes the
+# driver to exit successfully when the appropriate language module
+# has not been installed. This is fixed in 2.95.4, 3.0.2, and 3.1.
+# Therefore we must check for the error message as well as an
+# unsuccessful exit.
+# Other compilers, like HP Tru64 UNIX cc, exit successfully when
+# given a .adb file, but produce no object file. So we must check
+# if an object file was really produced to guard against this.
+errors=`(${CC} $1[]m4_ifval([$1], [ ])-c conftest.adb) 2>&1 || echo failure`
+if test x"$errors" = x && test -f conftest.$ac_objext; then
+ acx_cv_cc_gcc_supports_ada=yes
+fi
+rm -f conftest.*])
+
+if test x$GNATBIND != xno && test x$GNATMAKE != xno && test x$acx_cv_cc_gcc_supports_ada != xno; then
+ have_gnat=yes
+else
+ have_gnat=no
+fi
+])
+
+dnl 'make compare' can be significantly faster, if cmp itself can
+dnl skip bytes instead of using tail. The test being performed is
+dnl "if cmp --ignore-initial=2 t1 t2 && ! cmp --ignore-initial=1 t1 t2"
+dnl but we need to sink errors and handle broken shells. We also test
+dnl for the parameter format "cmp file1 file2 skip1 skip2" which is
+dnl accepted by cmp on some systems.
+AC_DEFUN([ACX_PROG_CMP_IGNORE_INITIAL],
+[AC_CACHE_CHECK([how to compare bootstrapped objects], gcc_cv_prog_cmp_skip,
+[ echo abfoo >t1
+ echo cdfoo >t2
+ gcc_cv_prog_cmp_skip='tail +16c $$f1 > tmp-foo1; tail +16c $$f2 > tmp-foo2; cmp tmp-foo1 tmp-foo2'
+ if cmp t1 t2 2 2 > /dev/null 2>&1; then
+ if cmp t1 t2 1 1 > /dev/null 2>&1; then
+ :
+ else
+ gcc_cv_prog_cmp_skip='cmp $$f1 $$f2 16 16'
+ fi
+ fi
+ if cmp --ignore-initial=2 t1 t2 > /dev/null 2>&1; then
+ if cmp --ignore-initial=1 t1 t2 > /dev/null 2>&1; then
+ :
+ else
+ gcc_cv_prog_cmp_skip='cmp --ignore-initial=16 $$f1 $$f2'
+ fi
+ fi
+ rm t1 t2
+])
+do_compare="$gcc_cv_prog_cmp_skip"
+AC_SUBST(do_compare)
+])
+
+dnl See whether we can include both string.h and strings.h.
+AC_DEFUN([ACX_HEADER_STRING],
+[AC_CACHE_CHECK([whether string.h and strings.h may both be included],
+ gcc_cv_header_string,
+[AC_TRY_COMPILE([#include <string.h>
+#include <strings.h>], , gcc_cv_header_string=yes, gcc_cv_header_string=no)])
+if test $gcc_cv_header_string = yes; then
+ AC_DEFINE(STRING_WITH_STRINGS, 1, [Define if you can safely include both <string.h> and <strings.h>.])
+fi
+])
+
+dnl See if stdbool.h properly defines bool and true/false.
+dnl Check whether _Bool is built-in.
+AC_DEFUN([ACX_HEADER_STDBOOL],
+[AC_CACHE_CHECK([for working stdbool.h],
+ ac_cv_header_stdbool_h,
+[AC_TRY_COMPILE([#include <stdbool.h>],
+[bool foo = false;],
+ac_cv_header_stdbool_h=yes, ac_cv_header_stdbool_h=no)])
+if test $ac_cv_header_stdbool_h = yes; then
+ AC_DEFINE(HAVE_STDBOOL_H, 1,
+ [Define if you have a working <stdbool.h> header file.])
+fi
+AC_CACHE_CHECK(for built-in _Bool, gcc_cv_c__bool,
+[AC_TRY_COMPILE(,
+[_Bool foo;],
+gcc_cv_c__bool=yes, gcc_cv_c__bool=no)
+])
+if test $gcc_cv_c__bool = yes; then
+ AC_DEFINE(HAVE__BOOL, 1, [Define if the \`_Bool' type is built-in.])
+fi
+])
+
+dnl See if hard links work and if not, try to substitute $1 or simple copy.
+AC_DEFUN([ACX_PROG_LN],
+[AC_MSG_CHECKING(whether ln works)
+AC_CACHE_VAL(acx_cv_prog_LN,
+[rm -f conftestdata_t
+echo >conftestdata_f
+if ln conftestdata_f conftestdata_t 2>/dev/null
+then
+ acx_cv_prog_LN=ln
+else
+ acx_cv_prog_LN=no
+fi
+rm -f conftestdata_f conftestdata_t
+])dnl
+if test $acx_cv_prog_LN = no; then
+ LN="ifelse([$1],,cp,[$1])"
+ AC_MSG_RESULT([no, using $LN])
+else
+ LN="$acx_cv_prog_LN"
+ AC_MSG_RESULT(yes)
+fi
+AC_SUBST(LN)dnl
+])
+
+dnl GCC_TARGET_TOOL(PROGRAM, TARGET-VAR, HOST-VAR, IN-TREE-TOOL, LANGUAGE)
+AC_DEFUN([GCC_TARGET_TOOL],
+[AC_MSG_CHECKING(where to find the target $1)
+if test "x${build}" != "x${host}" ; then
+ if expr "x[$]$2" : "x/" > /dev/null; then
+ # We already found the complete path
+ ac_dir=`dirname [$]$2`
+ AC_MSG_RESULT(pre-installed in $ac_dir)
else
- $1="ifelse([$3],[],[${ncn_target_tool_prefix}$2],[$3])"
+ # Canadian cross, just use what we found
+ AC_MSG_RESULT(pre-installed)
fi
else
- $1="$ac_cv_prog_$1"
+ ifelse([$4],,,
+ [ok=yes
+ case " ${configdirs} " in
+ *" patsubst([$4], [/.*], []) "*) ;;
+ *) ok=no ;;
+ esac
+ ifelse([$5],,,
+ [case ,${enable_languages}, in
+ *,$5,*) ;;
+ *) ok=no ;;
+ esac])
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ $2='$$r/$(HOST_SUBDIR)/$4'
+ AC_MSG_RESULT(just compiled)
+ el])if expr "x[$]$2" : "x/" > /dev/null; then
+ # We already found the complete path
+ ac_dir=`dirname [$]$2`
+ AC_MSG_RESULT(pre-installed in $ac_dir)
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ $2='$($3)'
+ AC_MSG_RESULT(host tool)
+ else
+ # We need a cross tool
+ AC_MSG_RESULT(pre-installed)
+ fi
+fi
+AC_SUBST($2)])
+
+
+dnl Locate a program and check that its version is acceptable.
+dnl ACX_PROG_CHECK_VER(var, name, version-switch,
+dnl version-extract-regexp, version-glob)
+AC_DEFUN([ACX_CHECK_PROG_VER],[
+ AC_CHECK_PROG([$1], [$2], [$2])
+ if test -n "[$]$1"; then
+ # Found it, now check the version.
+ AC_CACHE_CHECK([for modern $2],
+ [gcc_cv_prog_$2_modern],
+ [ac_prog_version=`eval [$]$1 $3 2>&1 |
+ sed -n 's/^.*patsubst([[$4]],/,\/).*$/\1/p'`
+
+ [case $ac_prog_version in
+ '') gcc_cv_prog_$2_modern=no;;
+ $5) gcc_cv_prog_$2_modern=yes;;
+ *) gcc_cv_prog_$2_modern=no;;
+ esac]
+ ])
+ else
+ gcc_cv_prog_$2_modern=no
+ fi
+ if test $gcc_cv_prog_$2_modern = no; then
+ $1="${CONFIG_SHELL-/bin/sh} $ac_aux_dir/missing $2"
+ fi
+])
+
+dnl Support the --with-pkgversion configure option.
+dnl ACX_PKGVERSION(default-pkgversion)
+AC_DEFUN([ACX_PKGVERSION],[
+ AC_ARG_WITH(pkgversion,
+ AS_HELP_STRING([--with-pkgversion=PKG],
+ [Use PKG in the version string in place of "$1"]),
+ [case "$withval" in
+ yes) AC_MSG_ERROR([package version not specified]) ;;
+ no) PKGVERSION= ;;
+ *) PKGVERSION="($withval) " ;;
+ esac],
+ PKGVERSION="($1) "
+ )
+ AC_SUBST(PKGVERSION)
+])
+
+dnl Support the --with-bugurl configure option.
+dnl ACX_BUGURL(default-bugurl)
+AC_DEFUN([ACX_BUGURL],[
+ AC_ARG_WITH(bugurl,
+ AS_HELP_STRING([--with-bugurl=URL],
+ [Direct users to URL to report a bug]),
+ [case "$withval" in
+ yes) AC_MSG_ERROR([bug URL not specified]) ;;
+ no) BUGURL=
+ ;;
+ *) BUGURL="$withval"
+ ;;
+ esac],
+ BUGURL="$1"
+ )
+ case ${BUGURL} in
+ "")
+ REPORT_BUGS_TO=
+ REPORT_BUGS_TEXI=
+ ;;
+ *)
+ REPORT_BUGS_TO="<$BUGURL>"
+ REPORT_BUGS_TEXI=@uref{`echo "$BUGURL" | sed 's/@/@@/g'`}
+ ;;
+ esac;
+ AC_SUBST(REPORT_BUGS_TO)
+ AC_SUBST(REPORT_BUGS_TEXI)
+])
+
+dnl ####
+dnl # ACX_CHECK_CYGWIN_CAT_WORKS
+dnl # On Cygwin hosts, check that the cat command ignores
+dnl # carriage returns as otherwise builds will not work.
+dnl # See binutils PR 4334 for more details.
+AC_DEFUN([ACX_CHECK_CYGWIN_CAT_WORKS],[
+AC_MSG_CHECKING([to see if cat works as expected])
+echo a >cygwin-cat-check
+if test `cat cygwin-cat-check` == a ; then
+ rm cygwin-cat-check
+ AC_MSG_RESULT(yes)
+else
+ rm cygwin-cat-check
+ AC_MSG_RESULT(no)
+ AC_MSG_ERROR([The cat command does not ignore carriage return characters.
+ Please either mount the build directory in binary mode or run the following
+ commands before running any configure script:
+set -o igncr
+export SHELLOPTS
+ ])
fi
-]) []dnl # NCN_STRICT_CHECK_TARGET_TOOL
+])
OSDN Git Service
