AC_DEFUN([GCC_TOPLEV_SUBDIRS],
[AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_TARGET]) []dnl
AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_BUILD]) []dnl
+
+# post-stage1 host modules use a different CC_FOR_BUILD so, in order to
+# have matching libraries, they should use host libraries: Makefile.tpl
+# arranges to pass --with-build-libsubdir=$(HOST_SUBDIR).
+# However, they still use the build modules, because the corresponding
+# host modules (e.g. bison) are only built for the host when bootstrap
+# finishes. So:
+# - build_subdir is where we find build modules, and never changes.
+# - build_libsubdir is where we find build libraries, and can be overridden.
+
# Prefix 'build-' so this never conflicts with target_subdir.
build_subdir="build-${build_noncanonical}"
+AC_ARG_WITH(build-libsubdir,
+[ --with-build-libsubdir=[DIR] Directory where to find libraries for build system],
+build_libsubdir="$withval",
+build_libsubdir="$build_subdir")
# --srcdir=. covers the toplevel, while "test -d" covers the subdirectories
if ( test $srcdir = . && test -d gcc ) \
|| test -d $srcdir/../host-${host_noncanonical}; then
fi
# No prefix.
target_subdir=${target_noncanonical}
+AC_SUBST([build_libsubdir]) []dnl
AC_SUBST([build_subdir]) []dnl
AC_SUBST([host_subdir]) []dnl
AC_SUBST([target_subdir]) []dnl
]) []dnl # _NCN_TOOL_PREFIXES
####
-# NCN_CHECK_TARGET_TOOL(variable, prog-to-check-for,[value-if-not-found],[path])
-# Like AC_CHECK_TOOL, but tries a prefix of the target, not the host.
-# Code is pretty much lifted from autoconf2.53.
+# NCN_STRICT_CHECK_TOOLS(variable, progs-to-check-for,[value-if-not-found],[path])
+# Like plain AC_CHECK_TOOLS, but require prefix if build!=host.
-AC_DEFUN([NCN_CHECK_TARGET_TOOL],
+AC_DEFUN([NCN_STRICT_CHECK_TOOLS],
[AC_REQUIRE([_NCN_TOOL_PREFIXES]) []dnl
-if test -n "$ncn_target_tool_prefix"; then
- AC_CHECK_PROG([$1], [${ncn_target_tool_prefix}$2],
- [${ncn_target_tool_prefix}$2], , [$4])
+AC_ARG_VAR([$1], [$1 for the host])
+
+if test -n "[$]$1"; then
+ ac_cv_prog_$1=[$]$1
+elif test -n "$ac_cv_prog_$1"; then
+ $1=$ac_cv_prog_$1
fi
-if test -z "$ac_cv_prog_$1" ; then
- ncn_cv_$1=$$1
- AC_CHECK_PROG([ncn_cv_$1], [$2], [$2], [$3], [$4])
- $1=$ncn_cv_$1
-else
- $1="$ac_cv_prog_$1"
+
+if test -n "$ac_cv_prog_$1"; then
+ for ncn_progname in $2; do
+ AC_CHECK_PROG([$1], [${ncn_progname}], [${ncn_progname}], , [$4])
+ done
fi
-]) []dnl # NCN_CHECK_TARGET_TOOL
+for ncn_progname in $2; do
+ if test -n "$ncn_tool_prefix"; then
+ AC_CHECK_PROG([$1], [${ncn_tool_prefix}${ncn_progname}],
+ [${ncn_tool_prefix}${ncn_progname}], , [$4])
+ fi
+ if test -z "$ac_cv_prog_$1" && test $build = $host ; then
+ AC_CHECK_PROG([$1], [${ncn_progname}], [${ncn_progname}], , [$4])
+ fi
+ test -n "$ac_cv_prog_$1" && break
+done
+
+if test -z "$ac_cv_prog_$1" ; then
+ ifelse([$3],[], [set dummy $2
+ if test $build = $host ; then
+ $1="[$]2"
+ else
+ $1="${ncn_tool_prefix}[$]2"
+ fi], [$1="$3"])
+fi
+]) []dnl # NCN_STRICT_CHECK_TOOLS
####
-# NCN_STRICT_CHECK_TOOL(variable, prog-to-check-for,[value-if-not-found],[path])
-# Like AC_CHECK_TOOL, but requires the prefix if build!=host.
+# NCN_STRICT_CHECK_TARGET_TOOLS(variable, progs-to-check-for,[value-if-not-found],[path])
+# Like CVS Autoconf AC_CHECK_TARGET_TOOLS, but require prefix if build!=target.
-AC_DEFUN([NCN_STRICT_CHECK_TOOL],
+AC_DEFUN([NCN_STRICT_CHECK_TARGET_TOOLS],
[AC_REQUIRE([_NCN_TOOL_PREFIXES]) []dnl
-if test -n "$ncn_tool_prefix"; then
- AC_CHECK_PROG([$1], [${ncn_tool_prefix}$2],
- [${ncn_tool_prefix}$2], , [$4])
+AC_ARG_VAR([$1], patsubst([$1], [_FOR_TARGET$], [])[ for the target])
+
+if test -n "[$]$1"; then
+ ac_cv_prog_$1=[$]$1
+elif test -n "$ac_cv_prog_$1"; then
+ $1=$ac_cv_prog_$1
fi
+
+if test -n "$ac_cv_prog_$1"; then
+ for ncn_progname in $2; do
+ AC_CHECK_PROG([$1], [${ncn_progname}], [${ncn_progname}], , [$4])
+ done
+fi
+
+if test -z "$ac_cv_prog_$1" && test -n "$with_build_time_tools"; then
+ for ncn_progname in $2; do
+ AC_MSG_CHECKING([for ${ncn_progname} in $with_build_time_tools])
+ if test -x $with_build_time_tools/${ncn_progname}; then
+ ac_cv_prog_$1=$with_build_time_tools/${ncn_progname}
+ AC_MSG_RESULT(yes)
+ break
+ else
+ AC_MSG_RESULT(no)
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_$1"; then
+ for ncn_progname in $2; do
+ if test -n "$ncn_target_tool_prefix"; then
+ AC_CHECK_PROG([$1], [${ncn_target_tool_prefix}${ncn_progname}],
+ [${ncn_target_tool_prefix}${ncn_progname}], , [$4])
+ fi
+ if test -z "$ac_cv_prog_$1" && test $build = $target ; then
+ AC_CHECK_PROG([$1], [${ncn_progname}], [${ncn_progname}], , [$4])
+ fi
+ test -n "$ac_cv_prog_$1" && break
+ done
+fi
+
if test -z "$ac_cv_prog_$1" ; then
- if test $build = $host ; then
- ncn_cv_$1=$$1
- AC_CHECK_PROG([ncn_cv_$1], [$2], [$2], [ifelse([$3],[],[$2],[$3])], [$4])
- $1=$ncn_cv_$1
+ ifelse([$3],[], [set dummy $2
+ if test $build = $target ; then
+ $1="[$]2"
+ else
+ $1="${ncn_target_tool_prefix}[$]2"
+ fi], [$1="$3"])
+fi
+]) []dnl # NCN_STRICT_CHECK_TARGET_TOOLS
+
+
+# Backported from Autoconf 2.5x; can go away when and if
+# we switch. Put the OS path separator in $PATH_SEPARATOR.
+AC_DEFUN([ACX_PATH_SEP], [
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
else
- $1="ifelse([$3],[],[${ncn_tool_prefix}$2],[$3])"
+ PATH_SEPARATOR=:
fi
+ rm -f conf$$.sh
+fi
+])
+
+
+AC_DEFUN([ACX_TOOL_DIRS], [
+AC_REQUIRE([ACX_PATH_SEP])
+if test "x$exec_prefix" = xNONE; then
+ if test "x$prefix" = xNONE; then
+ gcc_cv_tool_prefix=$ac_default_prefix
+ else
+ gcc_cv_tool_prefix=$prefix
+ fi
else
- $1="$ac_cv_prog_$1"
+ gcc_cv_tool_prefix=$exec_prefix
fi
-]) []dnl # NCN_STRICT_CHECK_TOOL
+# If there is no compiler in the tree, use the PATH only. In any
+# case, if there is no compiler in the tree nobody should use
+# AS_FOR_TARGET and LD_FOR_TARGET.
+if test x$host = x$build && test -f $srcdir/gcc/BASE-VER; then
+ gcc_version=`cat $srcdir/gcc/BASE-VER`
+ gcc_cv_tool_dirs="$gcc_cv_tool_prefix/libexec/gcc/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/libexec/gcc/$target_noncanonical$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs/usr/lib/gcc/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs/usr/lib/gcc/$target_noncanonical$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/$target_noncanonical/bin/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/$target_noncanonical/bin$PATH_SEPARATOR"
+else
+ gcc_cv_tool_dirs=
+fi
-####
-# NCN_STRICT_CHECK_TARGET_TOOL(variable, prog-to-check-for,[value-if-not-found],[path])
-# Like NCN_CHECK_TARGET_TOOL, but requires the prefix if build!=target.
+if test x$build = x$target && test -n "$md_exec_prefix"; then
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs$md_exec_prefix$PATH_SEPARATOR"
+fi
-AC_DEFUN([NCN_STRICT_CHECK_TARGET_TOOL],
-[AC_REQUIRE([_NCN_TOOL_PREFIXES]) []dnl
-if test -n "$ncn_target_tool_prefix"; then
- AC_CHECK_PROG([$1], [${ncn_target_tool_prefix}$2],
- [${ncn_target_tool_prefix}$2], , [$4])
+]) []dnl # ACX_TOOL_DIRS
+
+# ACX_HAVE_GCC_FOR_TARGET
+# Check if the variable GCC_FOR_TARGET really points to a GCC binary.
+AC_DEFUN([ACX_HAVE_GCC_FOR_TARGET], [
+cat > conftest.c << \EOF
+#ifdef __GNUC__
+ gcc_yay;
+#endif
+EOF
+if ($GCC_FOR_TARGET -E conftest.c | grep gcc_yay) > /dev/null 2>&1; then
+ have_gcc_for_target=yes
+else
+ GCC_FOR_TARGET=${ncn_target_tool_prefix}gcc
+ have_gcc_for_target=no
fi
-if test -z "$ac_cv_prog_$1" ; then
- if test $build = $target ; then
- ncn_cv_$1=$$1
- AC_CHECK_PROG([ncn_cv_$1], [$2], [$2], [ifelse([$3],[],[$2],[$3])], [$4])
- $1=$ncn_cv_$1
- else
- $1="ifelse([$3],[],[${ncn_target_tool_prefix}$2],[$3])"
+rm conftest.c
+])
+
+# ACX_CHECK_INSTALLED_TARGET_TOOL(VAR, PROG)
+# Searching for installed target binutils. We need to take extra care,
+# else we may find the wrong assembler, linker, etc., and lose.
+#
+# First try --with-build-time-tools, if specified.
+#
+# For build != host, we ask the installed GCC for the name of the tool it
+# uses, and accept it if it is an absolute path. This is because the
+# only good choice for a compiler is the same GCC version that is being
+# installed (or we couldn't make target libraries), and we assume that
+# on the host system we'll have not only the same GCC version, but also
+# the same binutils version.
+#
+# For build == host, search the same directories that the installed
+# compiler will search. We used to do this for the assembler, linker,
+# and nm only; for simplicity of configuration, however, we extend this
+# criterion to tools (such as ar and ranlib) that are never invoked by
+# the compiler, to avoid mismatches.
+#
+# Also note we have to check MD_EXEC_PREFIX before checking the user's path
+# if build == target. This makes the most sense only when bootstrapping,
+# but we also do so when build != host. In this case, we hope that the
+# build and host systems will have similar contents of MD_EXEC_PREFIX.
+#
+# If we do not find a suitable binary, then try the user's path.
+
+AC_DEFUN([ACX_CHECK_INSTALLED_TARGET_TOOL], [
+AC_REQUIRE([ACX_TOOL_DIRS])
+AC_REQUIRE([ACX_HAVE_GCC_FOR_TARGET])
+if test -z "$ac_cv_path_$1" ; then
+ if test -n "$with_build_time_tools"; then
+ AC_MSG_CHECKING([for $2 in $with_build_time_tools])
+ if test -x $with_build_time_tools/$2; then
+ $1=`cd $with_build_time_tools && pwd`/$2
+ ac_cv_path_$1=[$]$1
+ AC_MSG_RESULT([$ac_cv_path_$1])
+ else
+ AC_MSG_RESULT(no)
+ fi
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ $1=`$GCC_FOR_TARGET --print-prog-name=$2`
+ test [$]$1=$2 && $1=
+ ac_cv_path_$1=[$]$1
fi
+fi
+if test -z "$ac_cv_path_$1" && test -n "$gcc_cv_tool_dirs"; then
+ AC_PATH_PROG([$1], [$2], [], [$gcc_cv_tool_dirs])
+fi
+if test -z "$ac_cv_path_$1" ; then
+ NCN_STRICT_CHECK_TARGET_TOOLS([$1], [$2])
else
- $1="$ac_cv_prog_$1"
+ $1=$ac_cv_path_$1
fi
-]) []dnl # NCN_STRICT_CHECK_TARGET_TOOL
+]) []dnl # ACX_CHECK_INSTALLED_TARGET_TOOL
###
# AC_PROG_CPP_WERROR
# understands Ada. We use the user's CC setting, already found.
#
# Sets the shell variable have_gnat to yes or no as appropriate, and
-# substitutes GNATBIND.
+# substitutes GNATBIND and GNATMAKE.
AC_DEFUN([ACX_PROG_GNAT],
[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])
AC_REQUIRE([AC_PROG_CC])
AC_CHECK_TOOL(GNATBIND, gnatbind, no)
+AC_CHECK_TOOL(GNATMAKE, gnatmake, no)
AC_CACHE_CHECK([whether compiler driver understands Ada],
acx_cv_cc_gcc_supports_ada,
[cat >conftest.adb <<EOF
errors=`(${CC} -c conftest.adb) 2>&1 || echo failure`
if test x"$errors" = x && test -f conftest.$ac_objext; then
acx_cv_cc_gcc_supports_ada=yes
- break
fi
rm -f conftest.*])
-if test x$GNATBIND != xno && test x$acx_cv_cc_gcc_supports_ada != xno; then
+if test x$GNATBIND != xno && test x$GNATMAKE != xno && test x$acx_cv_cc_gcc_supports_ada != xno; then
have_gnat=yes
else
have_gnat=no
AC_SUBST(LN)dnl
])
+dnl GCC_TARGET_TOOL(PROGRAM, TARGET-VAR, HOST-VAR, IN-TREE-TOOL, LANGUAGE)
+AC_DEFUN([GCC_TARGET_TOOL],
+[AC_MSG_CHECKING(where to find the target $1)
+if test "x${build}" != "x${host}" ; then
+ if expr "x[$]$2" : "x/" > /dev/null; then
+ # We already found the complete path
+ ac_dir=`dirname [$]$2`
+ AC_MSG_RESULT(pre-installed in $ac_dir)
+ else
+ # Canadian cross, just use what we found
+ AC_MSG_RESULT(pre-installed)
+ fi
+else
+ ifelse([$4],,,
+ [ok=yes
+ case " ${configdirs} " in
+ *" patsubst([$4], [/.*], []) "*) ;;
+ *) ok=no ;;
+ esac
+ ifelse([$5],,,
+ [case ,${enable_languages}, in
+ *,$5,*) ;;
+ *) ok=no ;;
+ esac])
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ $2='$$r/$(HOST_SUBDIR)/$4'
+ AC_MSG_RESULT(just compiled)
+ el])if expr "x[$]$2" : "x/" > /dev/null; then
+ # We already found the complete path
+ ac_dir=`dirname [$]$2`
+ AC_MSG_RESULT(pre-installed in $ac_dir)
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ $2='$($3)'
+ AC_MSG_RESULT(host tool)
+ else
+ # We need a cross tool
+ AC_MSG_RESULT(pre-installed)
+ fi
+fi
+AC_SUBST($2)])
+
+
+dnl Locate a program and check that its version is acceptable.
+dnl ACX_PROG_CHECK_VER(var, name, version-switch,
+dnl version-extract-regexp, version-glob)
+AC_DEFUN([ACX_CHECK_PROG_VER],[
+ AC_CHECK_PROG([$1], [$2], [$2])
+ if test -n "[$]$1"; then
+ # Found it, now check the version.
+ AC_CACHE_CHECK([for modern $2],
+ [gcc_cv_prog_$2_modern],
+ [ac_prog_version=`eval [$]$1 $3 2>&1 |
+ sed -n 's/^.*patsubst([[$4]],/,\/).*$/\1/p'`
+
+ [case $ac_prog_version in
+ '') gcc_cv_prog_$2_modern=no;;
+ $5) gcc_cv_prog_$2_modern=yes;;
+ *) gcc_cv_prog_$2_modern=no;;
+ esac]
+
+ if test $gcc_cv_prog_$2_modern = no; then
+ $1="${CONFIG_SHELL-/bin/sh} $ac_aux_dir/missing $2"
+ fi
+ ])
+ else
+ gcc_cv_prog_$2_modern=no
+ fi
+ if test $gcc_cv_prog_$2_modern = no; then
+ $1="${CONFIG_SHELL-/bin/sh} $ac_aux_dir/missing $2"
+ fi
+])
+
+dnl Support the --with-pkgversion configure option.
+dnl ACX_PKGVERSION(default-pkgversion)
+AC_DEFUN([ACX_PKGVERSION],[
+ AC_ARG_WITH(pkgversion,
+ AS_HELP_STRING([--with-pkgversion=PKG],
+ [Use PKG in the version string in place of "$1"]),
+ [case "$withval" in
+ yes) AC_MSG_ERROR([package version not specified]) ;;
+ no) PKGVERSION= ;;
+ *) PKGVERSION="($withval) " ;;
+ esac],
+ PKGVERSION="($1) "
+ )
+ AC_SUBST(PKGVERSION)
+])
+
+dnl Support the --with-bugurl configure option.
+dnl ACX_BUGURL(default-bugurl)
+AC_DEFUN([ACX_BUGURL],[
+ AC_ARG_WITH(bugurl,
+ AS_HELP_STRING([--with-bugurl=URL],
+ [Direct users to URL to report a bug]),
+ [case "$withval" in
+ yes) AC_MSG_ERROR([bug URL not specified]) ;;
+ no) REPORT_BUGS_TO="";
+ REPORT_BUGS_TEXI=""
+ ;;
+ *) REPORT_BUGS_TO="<$withval>"
+ REPORT_BUGS_TEXI="@uref{`echo $withval | sed 's/@/@@/g'`}"
+ ;;
+ esac],
+ REPORT_BUGS_TO="<$1>"
+ REPORT_BUGS_TEXI="@uref{$1}"
+ )
+ AC_SUBST(REPORT_BUGS_TO)
+ AC_SUBST(REPORT_BUGS_TEXI)
+])
OSDN Git Service
