#
# Makefile for directory with subdirs to build.
# Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
-# 1999, 2000, 2001, 2002, 2003 Free Software Foundation
+# 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_DATA = @INSTALL_DATA@
+LN = @LN@
+LN_S = @LN_S@
# -------------------------------------------------
# Miscellaneous non-standard autoconf-set variables
$(RPATH_ENVVAR)=`echo "$(HOST_LIB_PATH):$(TARGET_LIB_PATH):$$$(RPATH_ENVVAR)" | sed 's,::*,:,g;s,^:*,,;s,:*$$,,'`; export $(RPATH_ENVVAR);
# This is the list of directories to be built for the build system.
-BUILD_CONFIGDIRS = libiberty
+BUILD_CONFIGDIRS = libiberty libbanshee
# Build programs are put under this directory.
BUILD_SUBDIR = @build_subdir@
# This is set by the configure script to the arguments to use when configuring
# directories built for the build system.
BUILD_CONFIGARGS = @build_configargs@
+# This is the list of variables to export in the environment when
+# configuring any subdirectory. It must also be exported whenever
+# recursing into a build directory in case that directory's Makefile
+# re-runs configure.
+BASE_EXPORTS = \
+ FLEX="$(FLEX)"; export FLEX; \
+ LEX="$(LEX)"; export LEX; \
+ BISON="$(BISON)"; export BISON; \
+ YACC="$(YACC)"; export YACC; \
+ M4="$(M4)"; export M4; \
+ MAKEINFO="$(MAKEINFO)"; export MAKEINFO;
+
+# This is the list of variables to export in the environment when
+# configuring subdirectories for the build system.
+BUILD_EXPORTS = \
+ $(BASE_EXPORTS) \
+ AR="$(AR_FOR_BUILD)"; export AR; \
+ AS="$(AS_FOR_BUILD)"; export AS; \
+ CC="$(CC_FOR_BUILD)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_BUILD)"; export CFLAGS; \
+ CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \
+ CXX="$(CXX_FOR_BUILD)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_BUILD)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_BUILD)"; export GCJ; \
+ GFORTRAN="$(GFORTRAN_FOR_BUILD)"; export GFORTRAN; \
+ DLLTOOL="$(DLLTOOL_FOR_BUILD)"; export DLLTOOL; \
+ LD="$(LD_FOR_BUILD)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_BUILD)"; export LDFLAGS; \
+ NM="$(NM_FOR_BUILD)"; export NM; \
+ RANLIB="$(RANLIB_FOR_BUILD)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_BUILD)"; export WINDRES;
+
# This is the list of directories to built for the host system.
SUBDIRS = @configdirs@
# This is set by the configure script to the arguments to use when configuring
# directories built for the host system.
HOST_CONFIGARGS = @host_configargs@
+# This is the list of variables to export in the environment when
+# configuring subdirectories for the host system.
+HOST_EXPORTS = \
+ $(BASE_EXPORTS) \
+ CC="$(CC)"; export CC; \
+ CFLAGS="$(CFLAGS)"; export CFLAGS; \
+ CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \
+ CXX="$(CXX)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \
+ AR="$(AR)"; export AR; \
+ AS="$(AS)"; export AS; \
+ CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \
+ DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \
+ LD="$(LD)"; export LD; \
+ LDFLAGS="$(LDFLAGS)"; export LDFLAGS; \
+ NM="$(NM)"; export NM; \
+ RANLIB="$(RANLIB)"; export RANLIB; \
+ WINDRES="$(WINDRES)"; export WINDRES; \
+ OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \
+ OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \
+ TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \
+ GMPLIBS="$(HOST_GMPLIBS)"; export GMPLIBS; \
+ GMPINC="$(HOST_GMPINC)"; export GMPINC;
+
+# Similar, for later GCC stages.
+STAGE_HOST_EXPORTS = \
+ $(HOST_EXPORTS) \
+ CC="$(STAGE_CC_WRAPPER) $$r/prev-gcc/xgcc$(exeext) -B$$r/prev-gcc/ -B$(build_tooldir)/bin/"; export CC; \
+ CC_FOR_BUILD="$(STAGE_CC_WRAPPER) $$r/prev-gcc/xgcc$(exeext) -B$$r/prev-gcc/ -B$(build_tooldir)/bin/"; export CC_FOR_BUILD;
# This is set by the configure script to the list of directories which
# should be built using the target tools.
# This is set by the configure script to the arguments to use when configuring
# directories built for the target.
TARGET_CONFIGARGS = @target_configargs@
+# This is the list of variables to export in the environment when
+# configuring subdirectories for the host system.
+BASE_TARGET_EXPORTS = \
+ $(BASE_EXPORTS) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \
+ CPPFLAGS="$(CFLAGS_FOR_TARGET)"; export CPPFLAGS; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ GFORTRAN="$(GFORTRAN_FOR_TARGET)"; export GFORTRAN; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES;
+
+RAW_CXX_TARGET_EXPORTS = \
+ $(BASE_TARGET_EXPORTS) \
+ CXX_FOR_TARGET="$(RAW_CXX_FOR_TARGET)"; export CXX_FOR_TARGET; \
+ CXX="$(RAW_CXX_FOR_TARGET)"; export CXX;
+
+NORMAL_TARGET_EXPORTS = \
+ $(BASE_TARGET_EXPORTS) \
+ CXX="$(CXX_FOR_TARGET)"; export CXX;
+
+# Where to find GMP
+HOST_GMPLIBS = @gmplibs@
+HOST_GMPINC = @gmpinc@
# ----------------------------------------------
# Programs producing files for the BUILD machine
CXX_FOR_BUILD = $(CXX)
+# Path to the build directory for a Canadian cross, empty otherwise.
+BUILD_DIR_PREFIX = @BUILD_DIR_PREFIX@
+
# Special variables passed down in EXTRA_GCC_FLAGS. They are defined
# here so that they can be overridden by Makefile fragments.
BUILD_PREFIX = @BUILD_PREFIX@
BUILD_PREFIX_1 = @BUILD_PREFIX_1@
-BISON=@BISON@
-USUAL_BISON = `if [ -f $$r/bison/bison ] ; then \
- echo $$r/bison/bison -L $$s/bison/ ; \
+CONFIGURED_BISON = @CONFIGURED_BISON@
+BISON = `if [ -f $$r/$(BUILD_DIR_PREFIX)/bison/bison ] ; then \
+ echo $$r/$(BUILD_DIR_PREFIX)/bison/bison -L $$s/bison/ ; \
else \
- echo bison ; \
+ echo ${CONFIGURED_BISON} ; \
fi`
-DEFAULT_YACC = @DEFAULT_YACC@
-YACC=@YACC@
-USUAL_YACC = `if [ -f $$r/bison/bison ] ; then \
- echo $$r/bison/bison -y -L $$s/bison/ ; \
- elif [ -f $$r/byacc/byacc ] ; then \
- echo $$r/byacc/byacc ; \
+CONFIGURED_YACC = @CONFIGURED_YACC@
+YACC = `if [ -f $$s/$(BUILD_DIR_PREFIX)/bison/bison ] ; then \
+ echo $$r/$(BUILD_DIR_PREFIX)/bison/bison -y -L $$s/bison/ ; \
+ elif [ -f $$s/$(BUILD_DIR_PREFIX)/byacc/byacc ] ; then \
+ echo $$r/$(BUILD_DIR_PREFIX)/byacc/byacc ; \
else \
- echo ${DEFAULT_YACC} ; \
+ echo ${CONFIGURED_YACC} ; \
fi`
-DEFAULT_LEX = @DEFAULT_LEX@
-LEX=@LEX@
-USUAL_LEX = `if [ -f $$r/flex/flex ] ; \
- then echo $$r/flex/flex ; \
- else echo ${DEFAULT_LEX} ; fi`
+CONFIGURED_FLEX = @CONFIGURED_FLEX@
+FLEX = `if [ -f $$r/$(BUILD_DIR_PREFIX)/flex/flex ] ; \
+ then echo $$r/$(BUILD_DIR_PREFIX)/flex/flex ; \
+ else echo ${CONFIGURED_FLEX} ; fi`
-DEFAULT_M4 = @DEFAULT_M4@
-M4 = `if [ -f $$r/m4/m4 ] ; \
- then echo $$r/m4/m4 ; \
- else echo ${DEFAULT_M4} ; fi`
+CONFIGURED_LEX = @CONFIGURED_LEX@
+LEX = `if [ -f $$r/$(BUILD_DIR_PREFIX)/flex/flex ] ; \
+ then echo $$r/$(BUILD_DIR_PREFIX)/flex/flex ; \
+ else echo ${CONFIGURED_LEX} ; fi`
+
+CONFIGURED_M4 = @CONFIGURED_M4@
+M4 = `if [ -f $$r/$(BUILD_DIR_PREFIX)/m4/m4 ] ; \
+ then echo $$r/$(BUILD_DIR_PREFIX)/m4/m4 ; \
+ else echo ${CONFIGURED_M4} ; fi`
# For an installed makeinfo, we require it to be from texinfo 4.2 or
-# higher, else we use the "missing" dummy.
-MAKEINFO=@MAKEINFO@
-USUAL_MAKEINFO = `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \
- then echo $$r/texinfo/makeinfo/makeinfo ; \
- else if (makeinfo --version \
+# higher, else we use the "missing" dummy. We also pass the subdirectory
+# makeinfo even if only the Makefile is there, because Texinfo builds its
+# manual when made, and it requires its own version.
+CONFIGURED_MAKEINFO = @CONFIGURED_MAKEINFO@
+MAKEINFO = `if [ -f $$r/$(BUILD_DIR_PREFIX)/texinfo/makeinfo/Makefile ] ; \
+ then echo $$r/$(BUILD_DIR_PREFIX)/texinfo/makeinfo/makeinfo ; \
+ else if (${CONFIGURED_MAKEINFO} --version \
| egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[2-9]|[5-9])') >/dev/null 2>&1; \
- then echo makeinfo; else echo $$s/missing makeinfo; fi; fi`
+ then echo ${CONFIGURED_MAKEINFO}; else echo $$s/missing makeinfo; fi; fi`
# This just becomes part of the MAKEINFO definition passed down to
# sub-makes. It lets flags be given on the command line while still
# This is the list of directories that may be needed in RPATH_ENVVAR
# so that prorgams built for the target machine work.
-TARGET_LIB_PATH = $$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs:
+TARGET_LIB_PATH = $$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs:$$r/$(TARGET_SUBDIR)/libmudflap/.libs
FLAGS_FOR_TARGET = @FLAGS_FOR_TARGET@
AR_FOR_TARGET=@AR_FOR_TARGET@
+CONFIGURED_AR_FOR_TARGET=@CONFIGURED_AR_FOR_TARGET@
USUAL_AR_FOR_TARGET = ` \
if [ -f $$r/binutils/ar ] ; then \
echo $$r/binutils/ar ; \
if [ '$(host)' = '$(target)' ] ; then \
echo $(AR); \
else \
- echo ar | sed '$(program_transform_name)' ; \
+ echo $(CONFIGURED_AR_FOR_TARGET) ; \
fi; \
fi`
AS_FOR_TARGET=@AS_FOR_TARGET@
+CONFIGURED_AS_FOR_TARGET=@CONFIGURED_AS_FOR_TARGET@
USUAL_AS_FOR_TARGET = ` \
if [ -f $$r/gas/as-new ] ; then \
echo $$r/gas/as-new ; \
if [ '$(host)' = '$(target)' ] ; then \
echo $(AS); \
else \
- echo as | sed '$(program_transform_name)' ; \
+ echo $(CONFIGURED_AS_FOR_TARGET) ; \
fi; \
fi`
LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
DLLTOOL_FOR_TARGET=@DLLTOOL_FOR_TARGET@
+CONFIGURED_DLLTOOL_FOR_TARGET=@CONFIGURED_DLLTOOL_FOR_TARGET@
USUAL_DLLTOOL_FOR_TARGET = ` \
if [ -f $$r/binutils/dlltool ] ; then \
echo $$r/binutils/dlltool ; \
if [ '$(host)' = '$(target)' ] ; then \
echo $(DLLTOOL); \
else \
- echo dlltool | sed '$(program_transform_name)' ; \
+ echo $(CONFIGURED_DLLTOOL_FOR_TARGET) ; \
fi; \
fi`
GCJ_FOR_TARGET = @GCJ_FOR_TARGET@
+GFORTRAN_FOR_TARGET = @GFORTRAN_FOR_TARGET@
LD_FOR_TARGET=@LD_FOR_TARGET@
+CONFIGURED_LD_FOR_TARGET=@CONFIGURED_LD_FOR_TARGET@
USUAL_LD_FOR_TARGET = ` \
if [ -f $$r/ld/ld-new ] ; then \
echo $$r/ld/ld-new ; \
if [ '$(host)' = '$(target)' ] ; then \
echo $(LD); \
else \
- echo ld | sed '$(program_transform_name)' ; \
+ echo $(CONFIGURED_LD_FOR_TARGET) ; \
fi; \
fi`
LDFLAGS_FOR_TARGET =
NM_FOR_TARGET=@NM_FOR_TARGET@
+CONFIGURED_NM_FOR_TARGET=@CONFIGURED_NM_FOR_TARGET@
USUAL_NM_FOR_TARGET = ` \
if [ -f $$r/binutils/nm-new ] ; then \
echo $$r/binutils/nm-new ; \
if [ '$(host)' = '$(target)' ] ; then \
echo $(NM); \
else \
- echo nm | sed '$(program_transform_name)' ; \
+ echo $(CONFIGURED_NM_FOR_TARGET) ; \
fi; \
fi`
RANLIB_FOR_TARGET=@RANLIB_FOR_TARGET@
+CONFIGURED_RANLIB_FOR_TARGET=@CONFIGURED_RANLIB_FOR_TARGET@
USUAL_RANLIB_FOR_TARGET = ` \
if [ -f $$r/binutils/ranlib ] ; then \
echo $$r/binutils/ranlib ; \
echo ranlib; \
fi; \
else \
- echo ranlib | sed '$(program_transform_name)' ; \
+ echo $(CONFIGURED_RANLIB_FOR_TARGET) ; \
fi; \
fi`
WINDRES_FOR_TARGET=@WINDRES_FOR_TARGET@
+CONFIGURED_WINDRES_FOR_TARGET=@CONFIGURED_WINDRES_FOR_TARGET@
USUAL_WINDRES_FOR_TARGET = ` \
if [ -f $$r/binutils/windres ] ; then \
echo $$r/binutils/windres ; \
if [ '$(host)' = '$(target)' ] ; then \
echo $(WINDRES); \
else \
- echo windres | sed '$(program_transform_name)' ; \
+ echo $(CONFIGURED_WINDRES_FOR_TARGET) ; \
fi; \
fi`
# The first rule in the file had better be this one. Don't put any above it.
# This lives here to allow makefile fragments to contain dependencies.
-all: all.normal
-.PHONY: all
+@default_target@:
#### host and target specific makefile fragments come in here.
@target_makefile_frag@
CXX_FOR_TARGET='$(CXX_FOR_TARGET_FOR_RECURSIVE_MAKE)' \
RAW_CXX_FOR_TARGET='$(RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE)' \
+RECURSE_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS)
+
# Flags to pass down to most sub-makes, in which we're building with
# the host environment.
EXTRA_HOST_FLAGS = \
maybe-configure-target-[+module+][+
ENDFOR target_modules +]
-# The target built for a native build.
-.PHONY: all.normal
-all.normal: @all_build_modules@ all-host all-target
+# The target built for a native non-bootstrap build.
+.PHONY: all
+all: all-build all-host all-target
+.PHONY: all-build
+all-build: [+
+ FOR build_modules +] \
+ maybe-all-build-[+module+][+
+ ENDFOR build_modules +]
.PHONY: all-host
all-host: maybe-all-gcc [+
FOR host_modules +] \
@if [ -f ./gcc/Makefile ] ; then \
r=`${PWD_COMMAND}` ; export r ; \
$(SET_LIB_PATH) \
+ $(HOST_EXPORTS) \
(cd ./gcc && \
$(MAKE) $(FLAGS_TO_PASS) install-headers) ; \
else \
[+ FOR build_modules +]
.PHONY: configure-build-[+module+] maybe-configure-build-[+module+]
maybe-configure-build-[+module+]:
+@if build-[+module+]
+maybe-configure-build-[+module+]: configure-build-[+module+]
configure-build-[+module+]:
@test ! -f $(BUILD_SUBDIR)/[+module+]/Makefile || exit 0; \
$(SHELL) $(srcdir)/mkinstalldirs $(BUILD_SUBDIR)/[+module+] ; \
r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- AR="$(AR_FOR_BUILD)"; export AR; \
- AS="$(AS_FOR_BUILD)"; export AS; \
- CC="$(CC_FOR_BUILD)"; export CC; \
- CFLAGS="$(CFLAGS_FOR_BUILD)"; export CFLAGS; \
- CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \
- CXX="$(CXX_FOR_BUILD)"; export CXX; \
- CXXFLAGS="$(CXXFLAGS_FOR_BUILD)"; export CXXFLAGS; \
- GCJ="$(GCJ_FOR_BUILD)"; export GCJ; \
- DLLTOOL="$(DLLTOOL_FOR_BUILD)"; export DLLTOOL; \
- LD="$(LD_FOR_BUILD)"; export LD; \
- LDFLAGS="$(LDFLAGS_FOR_BUILD)"; export LDFLAGS; \
- NM="$(NM_FOR_BUILD)"; export NM; \
- RANLIB="$(RANLIB_FOR_BUILD)"; export RANLIB; \
- WINDRES="$(WINDRES_FOR_BUILD)"; export WINDRES; \
+ $(BUILD_EXPORTS) \
echo Configuring in $(BUILD_SUBDIR)/[+module+]; \
cd "$(BUILD_SUBDIR)/[+module+]" || exit 1; \
case $(srcdir) in \
rm -f no-such-file || : ; \
CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
$(BUILD_CONFIGARGS) $${srcdiroption} \
- --with-build-subdir="$(BUILD_SUBDIR)" \
+ --with-build-subdir="$(BUILD_SUBDIR)" [+extra_configure_flags+] \
|| exit 1
+@endif build-[+module+]
.PHONY: all-build-[+module+] maybe-all-build-[+module+]
maybe-all-build-[+module+]:
+@if build-[+module+]
+maybe-all-build-[+module+]: all-build-[+module+]
all-build-[+module+]: configure-build-[+module+]
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- (cd $(BUILD_SUBDIR)/[+module+] && $(MAKE) all)
+ $(BUILD_EXPORTS) \
+ (cd $(BUILD_SUBDIR)/[+module+] && $(MAKE) [+extra_make_flags+] all)
+@endif build-[+module+]
[+ ENDFOR build_modules +]
# --------------------------------------
[+ FOR host_modules +]
.PHONY: configure-[+module+] maybe-configure-[+module+]
maybe-configure-[+module+]:
+@if [+module+]
+maybe-configure-[+module+]: configure-[+module+]
configure-[+module+]:
@test ! -f [+module+]/Makefile || exit 0; \
[ -d [+module+] ] || mkdir [+module+]; \
r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- CC="$(CC)"; export CC; \
- CFLAGS="$(CFLAGS)"; export CFLAGS; \
- CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \
- CXX="$(CXX)"; export CXX; \
- CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \
- AR="$(AR)"; export AR; \
- AS="$(AS)"; export AS; \
- CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \
- DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \
- LD="$(LD)"; export LD; \
- NM="$(NM)"; export NM; \
- RANLIB="$(RANLIB)"; export RANLIB; \
- WINDRES="$(WINDRES)"; export WINDRES; \
- OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \
- OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \
+ $(HOST_EXPORTS) \
echo Configuring in [+module+]; \
cd [+module+] || exit 1; \
case $(srcdir) in \
libsrcdir="$$s/[+module+]";; \
esac; \
$(SHELL) $${libsrcdir}/configure \
- $(HOST_CONFIGARGS) $${srcdiroption} \
+ $(HOST_CONFIGARGS) $${srcdiroption} [+extra_configure_flags+] \
|| exit 1
+@endif [+module+]
.PHONY: all-[+module+] maybe-all-[+module+]
maybe-all-[+module+]:
+@if [+module+]
+maybe-all-[+module+]: all-[+module+]
all-[+module+]: configure-[+module+]
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(SET_LIB_PATH) \
+ $(HOST_EXPORTS) \
(cd [+module+] && $(MAKE) $(FLAGS_TO_PASS)[+
IF with_x
+] $(X11_FLAGS_TO_PASS)[+
- ENDIF with_x +] all)
+ ENDIF with_x +] [+extra_make_flags+] all)
+@endif [+module+]
.PHONY: check-[+module+] maybe-check-[+module+]
maybe-check-[+module+]:
+@if [+module+]
+maybe-check-[+module+]: check-[+module+]
[+ IF no_check +]
check-[+module+]:
[+ ELIF no_check_cross +]
r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(SET_LIB_PATH) \
+ $(HOST_EXPORTS) \
(cd [+module+] && $(MAKE) $(FLAGS_TO_PASS)[+
IF with_x
+] $(X11_FLAGS_TO_PASS)[+
- ENDIF with_x +] check); \
+ ENDIF with_x +] [+extra_make_flags+] check); \
fi
[+ ELSE check +]
check-[+module+]:
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(SET_LIB_PATH) \
+ $(HOST_EXPORTS) \
(cd [+module+] && $(MAKE) $(FLAGS_TO_PASS)[+
IF with_x
+] $(X11_FLAGS_TO_PASS)[+
- ENDIF with_x +] check)
+ ENDIF with_x +] [+extra_make_flags+] check)
[+ ENDIF no_check +]
+@endif [+module+]
.PHONY: install-[+module+] maybe-install-[+module+]
maybe-install-[+module+]:
+@if [+module+]
+maybe-install-[+module+]: install-[+module+]
[+ IF no_install +]
install-[+module+]:
[+ ELSE install +]
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(SET_LIB_PATH) \
+ $(HOST_EXPORTS) \
(cd [+module+] && $(MAKE) $(FLAGS_TO_PASS)[+
IF with_x
+] $(X11_FLAGS_TO_PASS)[+
- ENDIF with_x +] install)
+ ENDIF with_x +] [+extra_make_flags+] install)
[+ ENDIF no_install +]
+@endif [+module+]
# Other targets (info, dvi, etc.)
[+ FOR recursive_targets +]
.PHONY: maybe-[+make_target+]-[+module+] [+make_target+]-[+module+]
maybe-[+make_target+]-[+module+]:
+@if [+module+]
+maybe-[+make_target+]-[+module+]: [+make_target+]-[+module+]
[+ IF (match-value? = "missing" (get "make_target") ) +]
# [+module+] doesn't support [+make_target+].
[+make_target+]-[+module+]:
r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(SET_LIB_PATH) \
+ $(HOST_EXPORTS) \
for flag in $(EXTRA_HOST_FLAGS); do \
eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
done; \
"CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
"RANLIB=$${RANLIB}" \
"DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
- [+make_target+]) \
+ [+extra_make_flags+] [+make_target+]) \
|| exit 1
[+ ENDIF +]
+@endif [+module+]
[+ ENDFOR recursive_targets +]
[+ ENDFOR host_modules +]
[+ FOR target_modules +]
.PHONY: configure-target-[+module+] maybe-configure-target-[+module+]
maybe-configure-target-[+module+]:
+@if target-[+module+]
+maybe-configure-target-[+module+]: configure-target-[+module+]
# There's only one multilib.out. Cleverer subdirs shouldn't need it copied.
$(TARGET_SUBDIR)/[+module+]/multilib.out: multilib.out
$(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/[+module+] ; \
r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(SET_LIB_PATH) \
- AR="$(AR_FOR_TARGET)"; export AR; \
- AS="$(AS_FOR_TARGET)"; export AS; \
- CC="$(CC_FOR_TARGET)"; export CC; \
- CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
- CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \
- CPPFLAGS="$(CFLAGS_FOR_TARGET)"; export CPPFLAGS; \[+
+ $(SET_LIB_PATH) \[+
IF raw_cxx +]
- CXX_FOR_TARGET="$(RAW_CXX_FOR_TARGET)"; export CXX_FOR_TARGET; \
- CXX="$(RAW_CXX_FOR_TARGET)"; export CXX; \[+
+ $(RAW_CXX_TARGET_EXPORTS) \[+
ELSE normal_cxx +]
- CXX="$(CXX_FOR_TARGET)"; export CXX; \[+
+ $(NORMAL_TARGET_EXPORTS) \[+
ENDIF raw_cxx +]
- CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
- GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
- DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
- LD="$(LD_FOR_TARGET)"; export LD; \
- LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
- NM="$(NM_FOR_TARGET)"; export NM; \
- RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
- WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
echo Configuring in $(TARGET_SUBDIR)/[+module+]; \
cd "$(TARGET_SUBDIR)/[+module+]" || exit 1; \
case $(srcdir) in \
rm -f no-such-file || : ; \
CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
$(TARGET_CONFIGARGS) $${srcdiroption} \
- --with-target-subdir="$(TARGET_SUBDIR)" \
+ --with-target-subdir="$(TARGET_SUBDIR)" [+extra_configure_flags+] \
|| exit 1
+@endif target-[+module+]
.PHONY: all-target-[+module+] maybe-all-target-[+module+]
maybe-all-target-[+module+]:
+@if target-[+module+]
+maybe-all-target-[+module+]: all-target-[+module+]
all-target-[+module+]: configure-target-[+module+]
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(SET_LIB_PATH) \
+ $(SET_LIB_PATH) \[+
+IF raw_cxx +]
+ $(RAW_CXX_TARGET_EXPORTS) \[+
+ELSE normal_cxx +]
+ $(NORMAL_TARGET_EXPORTS) \[+
+ENDIF raw_cxx +]
(cd $(TARGET_SUBDIR)/[+module+] && \
$(MAKE) $(TARGET_FLAGS_TO_PASS) [+
IF raw_cxx
+] 'CXX=$$(RAW_CXX_FOR_TARGET)' 'CXX_FOR_TARGET=$$(RAW_CXX_FOR_TARGET)' [+
ENDIF raw_cxx
- +] all)
+ +] [+extra_make_flags+] all)
+@endif target-[+module+]
.PHONY: check-target-[+module+] maybe-check-target-[+module+]
maybe-check-target-[+module+]:
+@if target-[+module+]
+maybe-check-target-[+module+]: check-target-[+module+]
[+ IF no_check +]
# Dummy target for uncheckable module.
check-target-[+module+]:
check-target-[+module+]:
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(SET_LIB_PATH) \
+ $(SET_LIB_PATH) \[+
+IF raw_cxx +]
+ $(RAW_CXX_TARGET_EXPORTS) \[+
+ELSE normal_cxx +]
+ $(NORMAL_TARGET_EXPORTS) \[+
+ENDIF raw_cxx +]
(cd $(TARGET_SUBDIR)/[+module+] && \
$(MAKE) $(TARGET_FLAGS_TO_PASS) [+
IF raw_cxx
+] 'CXX=$$(RAW_CXX_FOR_TARGET)' 'CXX_FOR_TARGET=$$(RAW_CXX_FOR_TARGET)' [+
ENDIF raw_cxx
- +] check)
+ +] [+extra_make_flags+] check)
[+ ENDIF no_check +]
+@endif target-[+module+]
.PHONY: install-target-[+module+] maybe-install-target-[+module+]
maybe-install-target-[+module+]:
+@if target-[+module+]
+maybe-install-target-[+module+]: install-target-[+module+]
[+ IF no_install +]
# Dummy target for uninstallable.
install-target-[+module+]:
install-target-[+module+]: installdirs
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(SET_LIB_PATH) \
+ $(SET_LIB_PATH) \[+
+IF raw_cxx +]
+ $(RAW_CXX_TARGET_EXPORTS) \[+
+ELSE normal_cxx +]
+ $(NORMAL_TARGET_EXPORTS) \[+
+ENDIF raw_cxx +]
(cd $(TARGET_SUBDIR)/[+module+] && \
- $(MAKE) $(TARGET_FLAGS_TO_PASS) install)
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) [+extra_make_flags+] install)
[+ ENDIF no_install +]
+@endif target-[+module+]
# Other targets (info, dvi, etc.)
[+ FOR recursive_targets +]
.PHONY: maybe-[+make_target+]-target-[+module+] [+make_target+]-target-[+module+]
maybe-[+make_target+]-target-[+module+]:
+@if target-[+module+]
+maybe-[+make_target+]-target-[+module+]: [+make_target+]-target-[+module+]
[+ IF (match-value? = "missing" (get "make_target") ) +]
# [+module+] doesn't support [+make_target+].
[+make_target+]-target-[+module+]:
@[ -f $(TARGET_SUBDIR)/[+module+]/Makefile ] || exit 0 ; \
r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(SET_LIB_PATH) \
+ $(SET_LIB_PATH) \[+
+IF raw_cxx +]
+ $(RAW_CXX_TARGET_EXPORTS) \[+
+ELSE normal_cxx +]
+ $(NORMAL_TARGET_EXPORTS) \[+
+ENDIF raw_cxx +]
echo "Doing [+make_target+] in $(TARGET_SUBDIR)/[+module+]" ; \
for flag in $(EXTRA_TARGET_FLAGS); do \
eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
"CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
"RANLIB=$${RANLIB}" \
"DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
- [+make_target+]) \
+ [+extra_make_flags+] [+make_target+]) \
|| exit 1
[+ ENDIF +]
+@endif target-[+module+]
[+ ENDFOR recursive_targets +]
[+ ENDFOR target_modules +]
# We must skip configuring if toplevel bootstrap is going.
.PHONY: configure-gcc maybe-configure-gcc
maybe-configure-gcc:
+@if gcc
+maybe-configure-gcc: configure-gcc
configure-gcc:
+@endif gcc
+@if gcc-no-bootstrap
@test ! -f gcc/Makefile || exit 0; \
- [ -f stage_last ] && exit 0; \
[ -d gcc ] || mkdir gcc; \
r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- CC="$(CC)"; export CC; \
- CFLAGS="$(CFLAGS)"; export CFLAGS; \
- CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \
- CXX="$(CXX)"; export CXX; \
- CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \
- TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \
- AR="$(AR)"; export AR; \
- AS="$(AS)"; export AS; \
- CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \
- DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \
- LD="$(LD)"; export LD; \
- NM="$(NM)"; export NM; \
- RANLIB="$(RANLIB)"; export RANLIB; \
- WINDRES="$(WINDRES)"; export WINDRES; \
- OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \
- OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \
+ $(HOST_EXPORTS) \
echo Configuring in gcc; \
cd gcc || exit 1; \
case $(srcdir) in \
$(SHELL) $${libsrcdir}/configure \
$(HOST_CONFIGARGS) $${srcdiroption} \
|| exit 1
+@endif gcc-no-bootstrap
# Don't 'make all' in gcc if it's already been made by 'bootstrap'; that
# causes trouble. This wart will be fixed eventually by moving
# the bootstrap behavior to this file.
.PHONY: all-gcc maybe-all-gcc
maybe-all-gcc:
+@if gcc
+maybe-all-gcc: all-gcc
all-gcc: configure-gcc
+@endif gcc
+@if gcc-no-bootstrap
r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- if [ -f stage_last ] ; then \
- true ; \
- elif [ -f gcc/stage_last ] ; then \
- $(SET_LIB_PATH) \
+ $(SET_LIB_PATH) \
+ $(HOST_EXPORTS) \
+ if [ -f gcc/stage_last ] ; then \
(cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) quickstrap); \
else \
- $(SET_LIB_PATH) \
(cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) all); \
fi
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(SET_LIB_PATH) \
+ $(HOST_EXPORTS) \
echo "Bootstrapping the compiler"; \
cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) $@
@r=`${PWD_COMMAND}`; export r; \
compare=compare ;; \
esac; \
$(SET_LIB_PATH) \
+ $(HOST_EXPORTS) \
echo "$$msg"; \
cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) $$compare
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}` ; export s; \
$(SET_LIB_PATH) \
echo "Building runtime libraries"; \
- $(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) all
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) all
profiledbootstrap: all-bootstrap configure-gcc
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(SET_LIB_PATH) \
- echo "Bootstrapping the compiler"; \
+ $(HOST_EXPORTS) \
+ echo "Bootstrapping training compiler"; \
cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) stageprofile_build
@r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}` ; export s; \
- $(SET_LIB_PATH) \
- echo "Building runtime libraries and training compiler"; \
- $(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) all
- @r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(SET_LIB_PATH) \
+ $(HOST_EXPORTS) \
echo "Building feedback based compiler"; \
cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) stagefeedback_build
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}` ; export s; \
+ $(SET_LIB_PATH) \
+ echo "Building runtime libraries"; \
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) all
.PHONY: cross
cross: all-texinfo all-bison all-byacc all-binutils all-gas all-ld
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(SET_LIB_PATH) \
+ $(HOST_EXPORTS) \
echo "Building the C and C++ compiler"; \
cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) LANGUAGES="c c++"
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}` ; export s; \
$(SET_LIB_PATH) \
echo "Building runtime libraries"; \
- $(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) \
- LANGUAGES="c c++" all
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) LANGUAGES="c c++" all
+@endif gcc-no-bootstrap
.PHONY: check-gcc maybe-check-gcc
maybe-check-gcc:
+@if gcc
+maybe-check-gcc: check-gcc
check-gcc:
@if [ -f ./gcc/Makefile ] ; then \
r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(SET_LIB_PATH) \
+ $(HOST_EXPORTS) \
(cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) check); \
else \
true; \
r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(SET_LIB_PATH) \
+ $(HOST_EXPORTS) \
(cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) check-c++); \
else \
true; \
.PHONY: check-c++
check-c++: check-target-libstdc++-v3 check-gcc-c++
+@endif gcc
.PHONY: install-gcc maybe-install-gcc
maybe-install-gcc:
+@if gcc
+maybe-install-gcc: install-gcc
install-gcc:
@if [ -f ./gcc/Makefile ] ; then \
r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(SET_LIB_PATH) \
+ $(HOST_EXPORTS) \
(cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
else \
true; \
fi
+@endif gcc
# Install the gcc headers files, but not the fixed include files,
# which Cygnus is not allowed to distribute. This rule is very
r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}` ; export s; \
$(SET_LIB_PATH) \
+ $(HOST_EXPORTS) \
(cd ./gcc && \
$(MAKE) $(GCC_FLAGS_TO_PASS) install); \
rm -rf gcc/include; \
[+ FOR recursive_targets +]
.PHONY: maybe-[+make_target+]-gcc [+make_target+]-gcc
maybe-[+make_target+]-gcc:
+@if gcc
+maybe-[+make_target+]-gcc: [+make_target+]-gcc
[+make_target+]-gcc: [+
FOR depend +]\
[+depend+]-gcc [+
for flag in $(EXTRA_GCC_FLAGS); do \
eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
done; \
+ $(HOST_EXPORTS) \
echo "Doing [+make_target+] in gcc" ; \
(cd gcc && \
$(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
"DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
[+make_target+]) \
|| exit 1
+@endif gcc
[+ ENDFOR recursive_targets +]
+@if gcc-bootstrap
# ---------------------
# GCC bootstrap support
# ---------------------
-# We name the directories for the various stages "stage1-gcc",
-# "stage2-gcc","stage3-gcc", etc.
-# Unfortunately, the 'compare' process will fail (on debugging information)
-# if any directory names are different!
-# So in the building rule for each stage, we relocate them before and after.
-# The current one is 'gcc', while the previous one is 'prev-gcc'. (The
-# current one must be 'gcc' for now because the scripts in that directory
-# assume it.)
-# At the end of the bootstrap, 'stage3-gcc' must be moved to 'gcc' so that
-# libraries can find it. Ick!
+# We track the current stage (the one in 'gcc') in the stage_last file.
+# We name the build directories for the various stages "stage1-gcc",
+# "stage2-gcc","stage3-gcc", etc.
+
+# Since the 'compare' process will fail (on debugging information) if any
+# directory names are different, we need to link the gcc directory for
+# the previous stage to a constant name ('gcc-prev'), and to make the name of
+# the build directories constant as well. For the latter, we use naked names
+# like 'gcc', because the scripts in that directory assume it. We use
+# mv on platforms where symlinks to directories do not work or are not
+# reliable.
+
+# At the end of the bootstrap, a symlink to 'stage3-gcc' named 'gcc' must
+# be kept, so that libraries can find it. Ick!
+
+# It would be best to preinstall gcc into a staging area (and in the
+# future, gather there all prebootstrap packages). This would allow
+# assemblers and linkers can be bootstrapped as well as the compiler
+# (both in a combined tree, or separately). This however requires some
+# change to the gcc driver, again in order to avoid comparison failures.
# Bugs: This is almost certainly not parallel-make safe.
STAGE1_CFLAGS=@stage1_cflags@
STAGE1_LANGUAGES=@stage1_languages@
+# We only want to compare .o files, so set this!
+objext = .o
+
+# Real targets act phony if they depend on phony targets; this hack
+# prevents gratuitous rebuilding of stage 1.
+prebootstrap:
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-bootstrap
+ $(STAMP) prebootstrap
+
+# Flags to pass to stage2 and later makes.
+BOOT_CFLAGS= -g -O2
+POSTSTAGE1_FLAGS_TO_PASS = \
+ CC="$${CC}" CC_FOR_BUILD="$${CC_FOR_BUILD}" \
+ STAGE_PREFIX=$$r/stage[+prev+]-gcc/ \
+ CFLAGS="$(BOOT_CFLAGS)" \
+ ADAC="\$$(CC)"
+
# For stage 1:
# * We force-disable intermodule optimizations, even if
# --enable-intermodule was passed, since the installed compiler probably
# * Likewise, we force-disable coverage flags, since the installed compiler
# probably has never heard of them.
# * We build only C (and possibly Ada).
-configure-stage1-gcc:
- echo configure-stage1-gcc > stage_last ; \
- if [ -f stage1-gcc/Makefile ] ; then \
- $(STAMP) configure-stage1-gcc ; \
- exit 0; \
- else \
- true ; \
- fi ; \
- [ -d stage1-gcc ] || mkdir stage1-gcc; \
- mv stage1-gcc gcc ; \
- r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \
- TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \
- CC="$(CC)"; export CC; \
- CFLAGS="$(CFLAGS)"; export CFLAGS; \
- CXX="$(CXX)"; export CXX; \
- CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \
- AR="$(AR)"; export AR; \
- AS="$(AS)"; export AS; \
- CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \
- DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \
- LD="$(LD)"; export LD; \
- NM="$(NM)"; export NM; \
- RANLIB="$(RANLIB)"; export RANLIB; \
- WINDRES="$(WINDRES)"; export WINDRES; \
- OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \
- OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \
- echo Configuring stage 1 in gcc; \
- cd gcc || exit 1; \
- case $(srcdir) in \
- \.) \
- srcdiroption="--srcdir=."; \
- libsrcdir=".";; \
- /* | [A-Za-z]:[\\/]*) \
- srcdiroption="--srcdir=$(srcdir)/gcc"; \
- libsrcdir="$$s/gcc";; \
- *) \
- srcdiroption="--srcdir=../$(srcdir)/gcc"; \
- libsrcdir="$$s/gcc";; \
- esac; \
- $(SHELL) $${libsrcdir}/configure \
- $(HOST_CONFIGARGS) $${srcdiroption} \
- --disable-intermodule --disable-coverage \
- --enable-languages="$(STAGE1_LANGUAGES)"; \
- cd .. ; \
- mv gcc stage1-gcc ; \
- $(STAMP) configure-stage1-gcc
-# Real targets act phony if they depend on phony targets; this hack
-# prevents gratuitous rebuilding of stage 1.
-prebootstrap:
- $(MAKE) all-bootstrap
- $(STAMP) prebootstrap
-
-all-stage1-gcc: configure-stage1-gcc prebootstrap
- echo all-stage1-gcc > stage_last ; \
- r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- mv stage1-gcc gcc ; \
- cd gcc && \
- $(MAKE) $(GCC_FLAGS_TO_PASS) \
- CFLAGS="$(STAGE1_CFLAGS)" \
- || exit 1 ; \
- cd .. ; \
- mv gcc stage1-gcc ; \
- $(STAMP) all-stage1-gcc
-
-# TODO: Deal with STAGE_PREFIX (which is only for ada, incidentally)
-configure-stage2-gcc: all-stage1-gcc
- echo configure-stage2-gcc > stage_last ; \
- if [ -f stage2-gcc/Makefile ] ; then \
- $(STAMP) configure-stage2-gcc ; \
- exit 0; \
- else \
- true ; \
+[+ FOR bootstrap-stage +]
+.PHONY: stage[+id+]-start stage[+id+]-end
+
+stage[+id+]-start::
+ [ -f stage_last ] && $(MAKE) `cat stage_last`-end || :
+ echo stage[+id+] > stage_last ; \
+ [ -d stage[+id+]-gcc ] || mkdir stage[+id+]-gcc; \
+ set stage[+id+]-gcc gcc ; @CREATE_LINK_TO_DIR@ [+ IF prev +] ; \
+ set stage[+prev+]-gcc prev-gcc ; @CREATE_LINK_TO_DIR@ [+ ENDIF prev +]
+
+stage[+id+]-end::
+ rm -f stage_last ; \
+ set gcc stage[+id+]-gcc ; @UNDO_LINK_TO_DIR@ [+ IF prev +] ; \
+ set prev-gcc stage[+prev+]-gcc ; @UNDO_LINK_TO_DIR@ [+ ENDIF prev +]
+
+# Bubble a bugfix through all the stages up to stage [+id+]. They
+# are remade, but not reconfigured. The next stage (if any) will not
+# be reconfigured as well.
+.PHONY: stage[+id+]-bubble
+stage[+id+]-bubble:: [+ IF prev +]stage[+prev+]-bubble[+ ENDIF +]
+ @if [ -f all-stage[+id+]-gcc ] ; then \
+ echo Remaking stage [+id+] ; \
+ rm -f all-stage[+id+]-gcc ; \
fi ; \
- [ -d stage2-gcc ] || mkdir stage2-gcc; \
- mv stage2-gcc gcc ; \
- mv stage1-gcc prev-gcc ; \
- r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \
- TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \
- CC="$(CC)"; export CC; \
- CFLAGS="$(CFLAGS)"; export CFLAGS; \
- CXX="$(CXX)"; export CXX; \
- CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \
- AR="$(AR)"; export AR; \
- AS="$(AS)"; export AS; \
- CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \
- DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \
- LD="$(LD)"; export LD; \
- NM="$(NM)"; export NM; \
- RANLIB="$(RANLIB)"; export RANLIB; \
- WINDRES="$(WINDRES)"; export WINDRES; \
- OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \
- OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \
- echo Configuring stage 2 in gcc; \
- cd gcc || exit 1; \
- case $(srcdir) in \
- \.) \
- srcdiroption="--srcdir=."; \
- libsrcdir=".";; \
- /* | [A-Za-z]:[\\/]*) \
- srcdiroption="--srcdir=$(srcdir)/gcc"; \
- libsrcdir="$$s/gcc";; \
- *) \
- srcdiroption="--srcdir=../$(srcdir)/gcc"; \
- libsrcdir="$$s/gcc";; \
- esac; \
- $(SHELL) $${libsrcdir}/configure \
- $(HOST_CONFIGARGS) $${srcdiroption} ; \
- cd .. ; \
- mv gcc stage2-gcc ; \
- mv prev-gcc stage1-gcc ; \
- $(STAMP) configure-stage2-gcc
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-stage[+id+]-gcc
-# Flags to pass to stage2 and later makes.
-BOOT_CFLAGS= -g -O2
-POSTSTAGE1_FLAGS_TO_PASS = \
- CFLAGS="$(BOOT_CFLAGS)" \
- ADAC="\$$(CC)" \
- WARN_CFLAGS="\$$(GCC_WARN_CFLAGS)" \
- STRICT_WARN="\$$(STRICT2_WARN)" \
- OUTPUT_OPTION="-o \$$@"
+[+ IF prev +]
+stage[+prev+]-bubble::
+ @if [ -f configure-stage[+id+]-gcc ] ; then \
+ $(STAMP) configure-stage[+id+]-gcc ; \
+ fi
+[+ ENDIF prev +]
-all-stage2-gcc: all-stage1-gcc configure-stage2-gcc
- echo all-stage2-gcc > stage_last ; \
- r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- mv stage2-gcc gcc ; \
- mv stage1-gcc prev-gcc ; \
- cd gcc && \
- $(MAKE) $(GCC_FLAGS_TO_PASS) \
- CC="$(STAGE_CC_WRAPPER) $$r/prev-gcc/xgcc$(exeext) -B$$r/prev-gcc/ -B$(build_tooldir)/bin/" \
- CC_FOR_BUILD="$(STAGE_CC_WRAPPER) $$r/prev-gcc/xgcc$(exeext) -B$$r/prev-gcc/ -B$(build_tooldir)/bin/" \
- STAGE_PREFIX=$$r/prev-gcc/ \
- $(POSTSTAGE1_FLAGS_TO_PASS) || exit 1 ; \
- cd .. ; \
- mv prev-gcc stage1-gcc ; \
- mv gcc stage2-gcc ; \
- $(STAMP) all-stage2-gcc
-
-configure-stage3-gcc: all-stage2-gcc
- echo configure-stage3-gcc > stage_last ; \
- if [ -f stage3-gcc/Makefile ] ; then \
- $(STAMP) configure-stage3-gcc ; \
+configure-stage[+id+]-gcc: [+ IF prev +] all-stage[+prev+]-gcc [+
+ ELSE +] prebootstrap [+ ENDIF prev +]
+ $(MAKE) stage[+id+]-start
+ @if [ -f stage[+id+]-gcc/Makefile ] ; then \
+ $(STAMP) configure-stage[+id+]-gcc ; \
exit 0; \
else \
true ; \
fi ; \
- [ -d stage3-gcc ] || mkdir stage3-gcc; \
- mv stage3-gcc gcc ; \
- mv stage2-gcc prev-gcc ; \
r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \
- TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \
- CC="$(CC)"; export CC; \
- CFLAGS="$(CFLAGS)"; export CFLAGS; \
- CXX="$(CXX)"; export CXX; \
- CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \
- AR="$(AR)"; export AR; \
- AS="$(AS)"; export AS; \
- CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \
- DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \
- LD="$(LD)"; export LD; \
- NM="$(NM)"; export NM; \
- RANLIB="$(RANLIB)"; export RANLIB; \
- WINDRES="$(WINDRES)"; export WINDRES; \
- OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \
- OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \
- echo Configuring stage 3 in gcc; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; [+ IF prev +] \
+ $(STAGE_HOST_EXPORTS) [+ ELSE prev +] \
+ $(HOST_EXPORTS) [+ ENDIF prev +] \
+ echo Configuring stage [+id+] in gcc ; \
cd gcc || exit 1; \
case $(srcdir) in \
\.) \
libsrcdir="$$s/gcc";; \
esac; \
$(SHELL) $${libsrcdir}/configure \
- $(HOST_CONFIGARGS) $${srcdiroption} ; \
- cd .. ; \
- mv gcc stage3-gcc ; \
- mv prev-gcc stage2-gcc ; \
- $(STAMP) configure-stage3-gcc
+ $(HOST_CONFIGARGS) $${srcdiroption} \
+ [+extra_configure_flags+] && \
+ $(STAMP) ../configure-stage[+id+]-gcc
-all-stage3-gcc: all-stage2-gcc configure-stage3-gcc
- echo all-stage3-gcc > stage_last ; \
- r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- mv stage2-gcc prev-gcc ; \
- mv stage3-gcc gcc ; \
+all-stage[+id+]-gcc: configure-stage[+id+]-gcc
+ $(MAKE) stage[+id+]-start
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; [+ IF prev +] \
+ $(STAGE_HOST_EXPORTS) [+ ELSE prev +] \
+ $(HOST_EXPORTS) [+ ENDIF prev +] \
cd gcc && \
- $(MAKE) $(GCC_FLAGS_TO_PASS) \
- CC="$(STAGE_CC_WRAPPER) $$r/prev-gcc/xgcc$(exeext) -B$$r/prev-gcc/ -B$(build_tooldir)/bin/" \
- CC_FOR_BUILD="$(STAGE_CC_WRAPPER) $$r/prev-gcc/xgcc$(exeext) -B$$r/prev-gcc/ -B$(build_tooldir)/bin/" \
- STAGE_PREFIX=$$r/prev-gcc/ \
- $(POSTSTAGE1_FLAGS_TO_PASS) || exit 1 ; \
- cd .. ; \
- mv prev-gcc stage2-gcc ; \
- mv gcc stage3-gcc ; \
- $(STAMP) all-stage3-gcc
+ $(MAKE) $(GCC_FLAGS_TO_PASS) [+ IF prev +] \
+ $(POSTSTAGE1_FLAGS_TO_PASS) [+ ENDIF prev +] \
+ [+extra_make_flags+] && $(STAMP) ../all-stage[+id+]-gcc
-# We only want to compare .o files, so set this!
-objext = .o
-
-compare: all-stage3-gcc
- r=`${PWD_COMMAND}`; export r; \
+[+ IF compare-target +]
+[+compare-target+]: all-stage[+id+]-gcc
+ [ -f stage_last ] && $(MAKE) `cat stage_last`-end || :
+ @r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
rm -f .bad_compare ; \
- cd stage3-gcc; \
+ cd stage[+id+]-gcc; \
files=`find . -name "*$(objext)" -print` ; \
cd .. ; \
for file in $${files} ; do \
- cmp --ignore-initial=16 $$r/stage2-gcc/$$file $$r/stage3-gcc/$$file \
- > /dev/null 2>&1; \
+ f1=$$r/stage[+prev+]-gcc/$$file; f2=$$r/stage[+id+]-gcc/$$file; \
+ @do_compare@ > /dev/null 2>&1; \
test $$? -eq 1 && echo $$file differs >> .bad_compare || true; \
done ; \
if [ -f .bad_compare ]; then \
else \
true; \
fi ; \
- $(STAMP) compare
+ $(STAMP) [+compare-target+]
+[+ ENDIF compare-target +]
+
+[+ IF bootstrap-target +]
+.PHONY: [+bootstrap-target+]
+[+bootstrap-target+]:
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) stage[+id+]-bubble [+
+ IF compare-target +] [+compare-target+] [+
+ ENDIF compare-target +] \
+ stage[+id+]-start all stage[+id+]-end
+[+ ENDIF bootstrap-target +]
+
+.PHONY: restage[+id+] touch-stage[+id+] distclean-stage[+id+]
+
+# Rules to wipe a stage and all the following ones, used for cleanstrap
+[+ IF prev +]distclean-stage[+prev+]:: distclean-stage[+id+] [+ ENDIF prev +]
+distclean-stage[+id+]::
+ [ -f stage_last ] && $(MAKE) `cat stage_last`-end || :
+ rm -rf configure-stage[+id+]-gcc all-stage[+id+]-gcc stage[+id+]-gcc [+
+ IF compare-target +][+compare-target+] [+ ENDIF compare-target +]
+
+# Rules to renew the timestamp on a stage and all the following ones
+[+ IF prev +]touch-stage[+prev+]:: touch-stage[+id+] [+ ENDIF prev +]
+touch-stage[+id+]::
+ @[ -f configure-stage[+id+]-gcc ] && \
+ echo '$(STAMP) configure-stage[+id+]-gcc' && \
+ $(STAMP) configure-stage[+id+]-gcc; \
+ [ -f all-stage[+id+]-gcc ] && \
+ echo '$(STAMP) all-stage[+id+]-gcc' && \
+ $(STAMP) all-stage[+id+]-gcc; \
+ :
+
+# After building a stage, touch the following ones
+[+ IF prev +]restage[+prev+]:: touch-stage[+id+] [+ ENDIF prev +]
+restage[+id+]::
+ rm -rf all-stage[+id+]-gcc [+
+ IF compare-target +][+compare-target+] [+ ENDIF compare-target +]
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) [+
+ IF compare-target +][+compare-target+] [+
+ ELSE +] all-stage[+id+]-gcc [+ ENDIF compare-target +]
+
+[+ IF cleanstrap-target +]
+.PHONY: [+cleanstrap-target+]
+[+cleanstrap-target+]: distclean-stage1 [+bootstrap-target+]
+[+ ENDIF cleanstrap-target +]
+
+[+ ENDFOR bootstrap-stage +]
+
+stagefeedback-start::
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ cd stageprofile-gcc && \
+ { find . -type d | sort | sed 's,.*,$(SHELL) '"$$s"'/mkinstalldirs "../gcc/&",' | $(SHELL); } && \
+ { find . -name '*.*da' | sed 's,.*,$(LN) -f "&" "../gcc/&",' | $(SHELL); }
+
+profiledbootstrap: all-bootstrap configure-gcc
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(SET_LIB_PATH) \
+ $(HOST_EXPORTS) \
+ echo "Bootstrapping the compiler"; \
+ $(MAKE) stageprofile-bubble distclean-stagefeedback stageprofile-start
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}` ; export s; \
+ $(SET_LIB_PATH) \
+ echo "Building runtime libraries and training compiler"; \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) all
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(SET_LIB_PATH) \
+ $(HOST_EXPORTS) \
+ echo "Building feedback based compiler"; \
+ $(MAKE) stagefeedback-bubble stagefeedback-end
-.PHONY: new-bootstrap
-# This target exists so that everything can be made in one pass.
-# 'all-gcc' has to avoid stomping on the bootstrap-generated gcc for
-# this to work.
-new-bootstrap: compare
- mv stage3-gcc gcc ; \
- $(MAKE) all ; \
- mv gcc stage3-gcc
+@endif gcc-bootstrap
# --------------------------------------
# Dependencies between different modules
# are specified by depending on a 'maybe-' target. If you're not sure,
# it's safer to use a soft dependency.
+# Build modules
+all-build-bison: maybe-all-build-texinfo
+all-build-flex: maybe-all-build-texinfo
+all-build-libiberty: maybe-all-build-texinfo
+all-build-m4: maybe-all-build-libiberty maybe-all-build-texinfo
+
# Host modules specific to gcc.
# GCC needs to identify certain tools.
# GCC also needs the information exported by the intl configure script.
configure-gcc: maybe-configure-intl maybe-configure-binutils maybe-configure-gas maybe-configure-ld maybe-configure-bison maybe-configure-flex
-all-gcc: maybe-all-libiberty maybe-all-intl maybe-all-bison maybe-all-byacc maybe-all-binutils maybe-all-gas maybe-all-ld maybe-all-zlib
+all-gcc: maybe-all-libiberty maybe-all-intl maybe-all-texinfo maybe-all-bison maybe-all-byacc maybe-all-flex maybe-all-binutils maybe-all-gas maybe-all-ld maybe-all-zlib maybe-all-libbanshee maybe-all-libcpp
+configure-libcpp: maybe-configure-libiberty maybe-configure-intl
+all-libcpp: maybe-all-libiberty maybe-all-intl
# This is a slightly kludgy method of getting dependencies on
# all-build-libiberty correct; it would be better to build it every time.
all-gcc: maybe-all-build-libiberty
-all-bootstrap: maybe-all-libiberty maybe-all-intl maybe-all-texinfo maybe-all-bison maybe-all-byacc maybe-all-binutils maybe-all-gas maybe-all-ld maybe-all-zlib
+all-bootstrap: [+ FOR host_modules +][+ IF bootstrap +]maybe-all-[+module+] [+ ENDIF bootstrap +][+ ENDFOR host_modules +]
# Host modules specific to gdb.
# GDB needs to know that the simulator is being built.
configure-target-fastjar: maybe-configure-target-zlib
all-target-fastjar: maybe-all-target-zlib maybe-all-target-libiberty
configure-target-libada: $(ALL_GCC_C)
-configure-target-libf2c: $(ALL_GCC_C)
-all-target-libf2c: maybe-all-target-libiberty
+configure-target-libgfortran: $(ALL_GCC_C)
configure-target-libffi: $(ALL_GCC_C)
configure-target-libjava: $(ALL_GCC_C) maybe-configure-target-zlib maybe-configure-target-boehm-gc maybe-configure-target-qthreads maybe-configure-target-libffi
all-target-libjava: maybe-all-fastjar maybe-all-target-zlib maybe-all-target-boehm-gc maybe-all-target-qthreads maybe-all-target-libffi
all-target-gperf: maybe-all-target-libiberty maybe-all-target-libstdc++-v3
configure-target-qthreads: $(ALL_GCC_C)
-# Dependencies of maybe-foo on foo. These are used because, for example,
-# all-gcc only depends on all-gas if gas is present and being configured.
-@maybe_dependencies@
-
# Serialization dependencies. Host configures don't work well in parallel to
# each other, due to contention over config.cache. Target configures and
# build configures are similar.
OSDN Git Service
