then echo $$r/m4/m4 ; \
else echo ${DEFAULT_M4} ; fi`
-MAKEINFO = `if [ -f $$r/texinfo/makeinfo/Makefile ] ; \
+# For an installed makeinfo, we require it to be from texinfo 4 or
+# higher, else we use the "missing" dummy.
+MAKEINFO = `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \
then echo $$r/texinfo/makeinfo/makeinfo ; \
- else echo makeinfo ; fi`
+ else if (makeinfo --version \
+ | egrep 'texinfo[^0-9]*([1-3][0-9]|[4-9])') >/dev/null 2>&1; \
+ then echo makeinfo; else echo $$s/missing makeinfo; fi; fi`
# This just becomes part of the MAKEINFO definition passed down to
# sub-makes. It lets flags be given on the command line while still
# Changed by configure to $(target_alias) if cross.
TARGET_SUBDIR = .
-# This is set by the configure script to the arguments passed to configure.
-CONFIG_ARGUMENTS =
+BUILD_CONFIGDIRS = libiberty
+BUILD_SUBDIR = .
+
+# This is set by the configure script to the arguments to use when configuring
+# directories built for the target.
+TARGET_CONFIGARGS =
+
+# This is set by the configure script to the arguments to use when configuring
+# directories built for the build system.
+BUILD_CONFIGARGS =
# This is set by configure to REALLY_SET_LIB_PATH if --enable-shared
# was used.
elif [ -f $$r/gcc/xgcc ]; then \
$(CC_FOR_TARGET) -print-prog-name=as ; \
else \
- if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(AS); \
else \
t='$(program_transform_name)'; echo as | sed -e 's/x/x/' $$t ; \
elif [ -f $$r/gcc/xgcc ]; then \
$(CC_FOR_TARGET) -print-prog-name=ld ; \
else \
- if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(LD); \
else \
t='$(program_transform_name)'; echo ld | sed -e 's/x/x/' $$t ; \
if [ -f $$r/binutils/dlltool ] ; then \
echo $$r/binutils/dlltool ; \
else \
- if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(DLLTOOL); \
else \
t='$(program_transform_name)'; echo dlltool | sed -e 's/x/x/' $$t ; \
if [ -f $$r/binutils/windres ] ; then \
echo $$r/binutils/windres ; \
else \
- if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(WINDRES); \
else \
t='$(program_transform_name)'; echo windres | sed -e 's/x/x/' $$t ; \
if [ -f $$r/binutils/ar ] ; then \
echo $$r/binutils/ar ; \
else \
- if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(AR); \
else \
t='$(program_transform_name)'; echo ar | sed -e 's/x/x/' $$t ; \
if [ -f $$r/binutils/ranlib ] ; then \
echo $$r/binutils/ranlib ; \
else \
- if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
- if [ x"$(RANLIB)" != x ]; then \
+ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
+ if [ x'$(RANLIB)' != x ]; then \
echo $(RANLIB); \
else \
echo ranlib; \
elif [ -f $$r/gcc/xgcc ]; then \
$(CC_FOR_TARGET) -print-prog-name=nm ; \
else \
- if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(NM); \
else \
t='$(program_transform_name)'; echo nm | sed -e 's/x/x/' $$t ; \
'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \
'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
'NM=$$(NM_FOR_TARGET)' \
- "`echo 'RANLIB=$(RANLIB)' | sed -e s/.*=$$/XFOO=/`" \
+ 'RANLIB=$$(RANLIB_FOR_TARGET)' \
'WINDRES=$$(WINDRES_FOR_TARGET)'
TARGET_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS)
GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS)
# This is a list of the targets for all of the modules which are compiled
+# using the build machine's native compiler. Configure edits the second
+# macro for build!=host builds.
+ALL_BUILD_MODULES_LIST = \
+ all-build-libiberty
+ALL_BUILD_MODULES =
+
+# This is a list of the configure targets for all of the modules which
+# are compiled using the native tools.
+CONFIGURE_BUILD_MODULES = \
+ configure-build-libiberty
+
+# This is a list of the targets for all of the modules which are compiled
# using $(FLAGS_TO_PASS).
ALL_MODULES = \
all-apache \
# The target built for a native build.
.PHONY: all.normal
all.normal: \
+ $(ALL_BUILD_MODULES) \
$(ALL_MODULES) \
$(ALL_X11_MODULES) \
$(ALL_TARGET_MODULES) \
case $$i in \
gcc) \
for flag in $(EXTRA_GCC_FLAGS); do \
- eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
done; \
;; \
*) \
for flag in $(EXTRA_HOST_FLAGS); do \
- eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
done; \
;; \
esac ; \
- export AR AS CC CXX LD NM RANLIB DLLTOOL WINDRES; \
if (cd ./$$i; \
$(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
"CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
for i in $(TARGET_CONFIGDIRS) -dummy-; do \
if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \
for flag in $(EXTRA_TARGET_FLAGS); do \
- eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
done; \
- export AR AS CC CXX LD NM RANLIB DLLTOOL WINDRES; \
if (cd $(TARGET_SUBDIR)/$$i; \
$(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
"CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
mv gcc/tmp-include gcc/include 2>/dev/null; \
else true; fi
+# This rule is used to build the modules which are built with the
+# build machine's native compiler.
+.PHONY: $(ALL_BUILD_MODULES)
+$(ALL_BUILD_MODULES):
+ dir=`echo $@ | sed -e 's/all-build-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ (cd $(BUILD_SUBDIR)/$${dir} && $(MAKE) all); \
+ else \
+ true; \
+ fi
+
+# This rule is used to configure the modules which are built with the
+# native tools.
+.PHONY: $(CONFIGURE_BUILD_MODULES)
+$(CONFIGURE_BUILD_MODULES):
+ @dir=`echo $@ | sed -e 's/configure-build-//'`; \
+ if [ ! -d $(BUILD_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(BUILD_SUBDIR)/$${dir}/Makefile ] ; then \
+ true; \
+ elif echo " $(BUILD_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/$${dir} ]; then \
+ [ -d $(BUILD_SUBDIR)/$${dir} ] || mkdir $(BUILD_SUBDIR)/$${dir};\
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ AR="$(AR_FOR_BUILD)"; export AR; \
+ AS="$(AS_FOR_BUILD)"; export AS; \
+ CC="$(CC_FOR_BUILD)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_BUILD)"; export CFLAGS; \
+ CXX="$(CXX_FOR_BUILD)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_BUILD)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_BUILD)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_BUILD)"; export DLLTOOL; \
+ LD="$(LD_FOR_BUILD)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_BUILD)"; export LDFLAGS; \
+ NM="$(NM_FOR_BUILD)"; export NM; \
+ RANLIB="$(RANLIB_FOR_BUILD)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_BUILD)"; export WINDRES; \
+ echo Configuring in $(BUILD_SUBDIR)/$${dir}; \
+ cd "$(BUILD_SUBDIR)/$${dir}" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(BUILD_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(BUILD_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/$${dir} "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/$${dir}"; \
+ libsrcdir="$$s/$${dir}"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(BUILD_CONFIGARGS) $${srcdiroption} \
+ --with-build-subdir="$(BUILD_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(BUILD_CONFIGARGS) $${srcdiroption} \
+ --with-build-subdir="$(BUILD_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir $${dir} || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
# This rule is used to build the modules which use FLAGS_TO_PASS. To
# build a target all-X means to cd to X and make all.
#
.PHONY: $(CHECK_MODULES) $(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
$(NATIVE_CHECK_MODULES):
- @if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ @if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
dir=`echo $@ | sed -e 's/check-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
if [ -f $${libsrcdir}/configure ] ; then \
rm -f no-such-file skip-this-dir; \
CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
- $(CONFIG_ARGUMENTS) $${srcdiroption} \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
--with-target-subdir="$(TARGET_SUBDIR)"; \
else \
rm -f no-such-file skip-this-dir; \
CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
- $(CONFIG_ARGUMENTS) $${srcdiroption} \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
--with-target-subdir="$(TARGET_SUBDIR)"; \
fi || exit 1; \
if [ -f skip-this-dir ] ; then \
s=`cd $(srcdir); pwd`; export s; \
$(SET_LIB_PATH) \
(cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check-c++); \
- $(MAKE) check-target-libstdc++-v3 \
+ $(MAKE) check-target-libstdc++-v3; \
else \
true; \
fi
all-bfd: all-libiberty all-intl
all-binutils: all-libiberty all-opcodes all-bfd all-flex all-bison all-byacc all-intl
all-bison: all-texinfo
-configure-target-boehm-gc: $(ALL_GCC_CXX) configure-target-qthreads
+configure-target-boehm-gc: $(ALL_GCC_C) configure-target-qthreads
all-target-boehm-gc: configure-target-boehm-gc
configure-target-bsp: $(ALL_GCC_C)
all-target-bsp: configure-target-bsp
all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-bison all-byacc all-sim $(gdbnlmrequirements) $(GDB_TK)
all-gettext:
all-gnuserv:
-configure-target-gperf: $(ALL_GCC_C)
+configure-target-gperf: $(ALL_GCC_CXX)
all-target-gperf: configure-target-gperf all-target-libiberty all-target-libstdc++-v3
all-gprof: all-libiberty all-bfd all-opcodes all-intl
all-grep: all-libiberty
all-target-libgloss: configure-target-libgloss configure-target-newlib
all-libgui: all-tcl all-tk all-tcl8.1 all-tk8.1 all-itcl
all-libiberty:
+
+all-build-libiberty: configure-build-libiberty
+
configure-target-libffi: $(ALL_GCC_C)
all-target-libffi: configure-target-libffi
-configure-target-libjava: $(ALL_GCC_CXX) configure-target-zlib configure-target-boehm-gc configure-target-qthreads configure-target-libffi
+configure-target-libjava: $(ALL_GCC_C) configure-target-zlib configure-target-boehm-gc configure-target-qthreads configure-target-libffi
all-target-libjava: configure-target-libjava all-fastjar all-target-zlib all-target-boehm-gc all-target-qthreads all-target-libffi
configure-target-librx: $(ALL_GCC_C)
all-target-librx: configure-target-librx
all-zlib:
configure-target-zlib: $(ALL_GCC_C)
all-target-zlib: configure-target-zlib
-all-fastjar: all-zlib
+all-fastjar: all-zlib all-libiberty
configure-target-fastjar: configure-target-zlib
-all-target-fastjar: configure-target-fastjar all-target-zlib
+all-target-fastjar: configure-target-fastjar all-target-zlib all-target-libiberty
configure-target-libiberty: $(ALL_GCC_C)
all-target-libiberty: configure-target-libiberty
all-target: $(ALL_TARGET_MODULES)
OSDN Git Service
