# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
DIST_COMMON = $(top_srcdir)/fragment.am $(srcdir)/Makefile.in \
	$(srcdir)/Makefile.am
subdir = doc
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../config/enable.m4 \
	$(top_srcdir)/../config/futex.m4 \
	$(top_srcdir)/../config/iconv.m4 \
	$(top_srcdir)/../config/lead-dot.m4 \
	$(top_srcdir)/../config/lib-ld.m4 \
	$(top_srcdir)/../config/lib-link.m4 \
	$(top_srcdir)/../config/lib-prefix.m4 \
	$(top_srcdir)/../config/multi.m4 \
	$(top_srcdir)/../config/no-executables.m4 \
	$(top_srcdir)/../config/override.m4 \
	$(top_srcdir)/../config/stdint.m4 \
	$(top_srcdir)/../config/unwind_ipinfo.m4 \
	$(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \
	$(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \
	$(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/crossconfig.m4 \
	$(top_srcdir)/linkage.m4 $(top_srcdir)/acinclude.m4 \
	$(top_srcdir)/../config/tls.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
depcomp =
am__depfiles_maybe =
SOURCES =
ABI_TWEAKS_SRCDIR = @ABI_TWEAKS_SRCDIR@
ACLOCAL = @ACLOCAL@
ALLOCATOR_H = @ALLOCATOR_H@
ALLOCATOR_NAME = @ALLOCATOR_NAME@
AMTAR = @AMTAR@
AR = @AR@
AS = @AS@
ATOMICITY_SRCDIR = @ATOMICITY_SRCDIR@
ATOMIC_FLAGS = @ATOMIC_FLAGS@
ATOMIC_WORD_SRCDIR = @ATOMIC_WORD_SRCDIR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BASIC_FILE_CC = @BASIC_FILE_CC@
BASIC_FILE_H = @BASIC_FILE_H@
CC = @CC@
CCODECVT_CC = @CCODECVT_CC@
CCOLLATE_CC = @CCOLLATE_CC@
CCTYPE_CC = @CCTYPE_CC@
CFLAGS = @CFLAGS@
CLOCALE_CC = @CLOCALE_CC@
CLOCALE_H = @CLOCALE_H@
CLOCALE_INTERNAL_H = @CLOCALE_INTERNAL_H@
CMESSAGES_CC = @CMESSAGES_CC@
CMESSAGES_H = @CMESSAGES_H@
CMONEY_CC = @CMONEY_CC@
CNUMERIC_CC = @CNUMERIC_CC@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CPU_DEFINES_SRCDIR = @CPU_DEFINES_SRCDIR@
CSTDIO_H = @CSTDIO_H@
CTIME_CC = @CTIME_CC@
CTIME_H = @CTIME_H@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
C_INCLUDE_DIR = @C_INCLUDE_DIR@
DEBUG_FLAGS = @DEBUG_FLAGS@
DEFS = @DEFS@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ERROR_CONSTANTS_SRCDIR = @ERROR_CONSTANTS_SRCDIR@
EXEEXT = @EXEEXT@
EXTRA_CXX_FLAGS = @EXTRA_CXX_FLAGS@
FGREP = @FGREP@
GLIBCXX_INCLUDES = @GLIBCXX_INCLUDES@
GLIBCXX_LIBS = @GLIBCXX_LIBS@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBICONV = @LIBICONV@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBSUPCXX_PICFLAGS = @LIBSUPCXX_PICFLAGS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBICONV = @LTLIBICONV@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OPTIMIZE_CXXFLAGS = @OPTIMIZE_CXXFLAGS@
OPT_LDFLAGS = @OPT_LDFLAGS@
OS_INC_SRCDIR = @OS_INC_SRCDIR@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
SECTION_FLAGS = @SECTION_FLAGS@
SECTION_LDFLAGS = @SECTION_LDFLAGS@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
SYMVER_FILE = @SYMVER_FILE@
TOPLEVEL_INCLUDES = @TOPLEVEL_INCLUDES@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
WARN_FLAGS = @WARN_FLAGS@
WERROR = @WERROR@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__leading_dot = @am__leading_dot@
am__tar = @am__tar@
am__untar = @am__untar@
baseline_dir = @baseline_dir@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
check_msgfmt = @check_msgfmt@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
enable_shared = @enable_shared@
enable_static = @enable_static@
exec_prefix = @exec_prefix@
glibcxx_MOFILES = @glibcxx_MOFILES@
glibcxx_PCHFLAGS = @glibcxx_PCHFLAGS@
glibcxx_POFILES = @glibcxx_POFILES@
glibcxx_builddir = @glibcxx_builddir@
glibcxx_localedir = @glibcxx_localedir@
glibcxx_prefixdir = @glibcxx_prefixdir@
glibcxx_srcdir = @glibcxx_srcdir@
glibcxx_thread_h = @glibcxx_thread_h@
glibcxx_toolexecdir = @glibcxx_toolexecdir@
glibcxx_toolexeclibdir = @glibcxx_toolexeclibdir@
gxx_include_dir = @gxx_include_dir@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
libtool_VERSION = @libtool_VERSION@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
multi_basedir = @multi_basedir@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
port_specific_symbol_files = @port_specific_symbol_files@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
toplevel_srcdir = @toplevel_srcdir@

# May be used by various substitution variables.
gcc_version := $(shell cat $(top_srcdir)/../gcc/BASE-VER)
MAINT_CHARSET = latin1
mkinstalldirs = $(SHELL) $(toplevel_srcdir)/mkinstalldirs
PWD_COMMAND = $${PWDCMD-pwd}
STAMP = echo timestamp >
toolexecdir = $(glibcxx_toolexecdir)
toolexeclibdir = $(glibcxx_toolexeclibdir)

# These bits are all figured out from configure.  Look in acinclude.m4
# or configure.ac to see how they are set.  See GLIBCXX_EXPORT_FLAGS.
CONFIG_CXXFLAGS = \
	$(SECTION_FLAGS) $(EXTRA_CXX_FLAGS)

WARN_CXXFLAGS = \
	$(WARN_FLAGS) $(WERROR) -fdiagnostics-show-location=once


# -I/-D flags to pass when compiling.
AM_CPPFLAGS = $(GLIBCXX_INCLUDES)

# Doxygen configuration
# Assumes doxygen, graphviz (with dot), pdflatex installed
doxygen_script = ${top_srcdir}/scripts/run_doxygen
doxygen_outdir = ${glibcxx_builddir}/doc/doxygen
doxygen_pdf = ${doxygen_outdir}/latex/refman.pdf

# Docbook configuration.
# Assumes
# libxslt
# dblatex
# pdflatex
# docbook-style-xsl
# emacs-nxml-mode
# xmlto passivetex
docbook_outdir = ${glibcxx_builddir}/doc/docbook
xml_dir = ${glibcxx_srcdir}/doc/xml
xml_sources_basic = \
	${xml_dir}/spine.xml \
	${xml_dir}/authors.xml \
	${xml_dir}/api.xml \
	${xml_dir}/faq.xml

xml_sources_manual = \
	${xml_dir}/manual/abi.xml \
	${xml_dir}/manual/algorithms.xml \
	${xml_dir}/manual/allocator.xml \
	${xml_dir}/manual/auto_ptr.xml \
	${xml_dir}/manual/atomics.xml \
	${xml_dir}/manual/backwards_compatibility.xml \
	${xml_dir}/manual/bitmap_allocator.xml \
	${xml_dir}/manual/build_hacking.xml \
	${xml_dir}/manual/codecvt.xml \
	${xml_dir}/manual/concurrency.xml \
	${xml_dir}/manual/concurrency_extensions.xml \
	${xml_dir}/manual/configure.xml \
	${xml_dir}/manual/containers.xml \
	${xml_dir}/manual/ctype.xml \
	${xml_dir}/manual/debug_mode.xml \
	${xml_dir}/manual/debug.xml \
	${xml_dir}/manual/diagnostics.xml \
	${xml_dir}/manual/evolution.xml \
	${xml_dir}/manual/extensions.xml \
	${xml_dir}/manual/internals.xml \
	${xml_dir}/manual/intro.xml \
	${xml_dir}/manual/io.xml \
	${xml_dir}/manual/iterators.xml \
	${xml_dir}/manual/locale.xml \
	${xml_dir}/manual/localization.xml \
	${xml_dir}/manual/messages.xml \
	${xml_dir}/manual/mt_allocator.xml \
	${xml_dir}/manual/numerics.xml \
	${xml_dir}/manual/parallel_mode.xml \
	${xml_dir}/manual/prerequisites.xml \
	${xml_dir}/manual/profile_mode.xml \
	${xml_dir}/manual/shared_ptr.xml \
	${xml_dir}/manual/spine.xml \
	${xml_dir}/manual/status_cxx1998.xml \
	${xml_dir}/manual/status_cxx200x.xml \
	${xml_dir}/manual/status_cxxtr1.xml \
	${xml_dir}/manual/status_cxxtr24733.xml \
	${xml_dir}/manual/strings.xml \
	${xml_dir}/manual/support.xml \
	${xml_dir}/manual/test.xml \
	${xml_dir}/manual/using.xml \
	${xml_dir}/manual/using_exceptions.xml \
	${xml_dir}/manual/utilities.xml \
	${xml_dir}/manual/appendix_free.xml \
	${xml_dir}/manual/appendix_contributing.xml \
	${xml_dir}/manual/appendix_porting.xml

xml_sources_extra = \
	${xml_dir}/gnu/fdl-1.2.xml \
	${xml_dir}/gnu/gpl-2.0.xml \
	${xml_dir}/gnu/gpl-3.0.xml

xml_sources = \
	${xml_sources_basic} \
	${xml_sources_manual} \
	${xml_sources_extra}

xml_noinst = \
	${xml_dir}/book.txml \
	${xml_dir}/chapter.txml \
	${xml_dir}/class.txml

XSLTPROC = xsltproc
XSLTPROC_FLAGS = --nonet --xinclude
XSL_STYLE_DIR = /usr/share/sgml/docbook/xsl-stylesheets
XSL_FO_STYLE = $(XSL_STYLE_DIR)/fo/docbook.xsl
XSL_HTML_STYLE = $(XSL_STYLE_DIR)/xhtml/chunk.xsl
#XSL_HTML_SINGLE_STYLE = $(XSL_STYLE_DIR)/xhtml/onechunk.xsl
XSL_HTML_SINGLE_STYLE = $(XSL_STYLE_DIR)/xhtml/docbook.xsl

# Validate existing XML structure.
XMLLINT = xmllint
#LINT_FLAGS = --debug --nonet --xinclude --nsclean --postvalid --nowarning
#LINT_FLAGS = --noblanks --noout --xinclude --postvalid --noent
LINT_FLAGS = --postvalid --debug --xinclude --noent --noblanks  --nonet --noout
DTD_FLAGS = --dtdvalid http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd
XMLLINT_FLAGS = $(LINT_FLAGS) $(DTD_FLAGS)

# PDF 1
# fop
FOP = fop
FOP_FLAGS = -d -r

# PDF 2
# xmlto
XML2PDF = xmlto
XML2PDF_FLAGS = -v pdf --skip-validation -o pdf

# PDF 3
# xmlroff
XMLROFF = xmlroff
XMLROFF_FLAGS = --format=pdf --backend=cairo --warn=1 --debug=1 --continue

# PDF 4
# prince
PRINCE = prince
PRINCE_FLAGS = --log prince.log -o pdf/spine.pdf

# PDF 5
# dblatex
DBLATEX_FLAGS = --dump --verbose --pdf -o ${docbook_outdir}/pdf/manual.pdf

# Performance doc and graph configuration.
# Assumes pychart, beautiful soup installed.
# Generates the plots and graphs for performance testing.
doc_performance_script = ${top_srcdir}/scripts/make_graphs.py

# By adding these files here, automake will remove them for 'make clean'
CLEANFILES = *.log
all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/fragment.am $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign --ignore-deps doc/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign --ignore-deps doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:

check-am: all-am
check: check-am
all-am: Makefile
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-libtool clean-local mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am:

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am:

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man:

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am:

.MAKE: install-am install-strip

.PHONY: all all-am check check-am clean clean-generic clean-libtool \
	clean-local distclean distclean-generic distclean-libtool dvi \
	dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-dvi install-dvi-am \
	install-exec install-exec-am install-html install-html-am \
	install-info install-info-am install-man install-pdf \
	install-pdf-am install-ps install-ps-am install-strip \
	installcheck installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am


# Documentation Overview
#
# There are two main source materials for libstdc++ documentation.
# The first is the doxygen markup in libstdc++ sources. And the second
# is the docbook markup in doc/xml/. A third and more obscure option
# deals with charting performance tests.

# Default, points to current best sub-rule that is the best conversion.
# MAN
doc-man: doc-man-doxygen

# PDF
doc-pdf: doc-pdf-docbook

# HTML
doc-html: doc-html-docbook

doc-html-doxygen:
	-(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
	  builddir=`cd ..; ${PWD_COMMAND}`; \
	  ${SHELL} ${doxygen_script} \
	  --host_alias=${host_alias} --mode=html $${srcdir} $${builddir} YES)

doc-man-doxygen:
	-(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
	  builddir=`cd ..; ${PWD_COMMAND}`; \
	  ${SHELL} ${doxygen_script} \
	  --host_alias=${host_alias} --mode=man $${srcdir} $${builddir} YES)

doc-xml-doxygen:
	-(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
	  builddir=`cd ..; ${PWD_COMMAND}`; \
	  ${SHELL} ${doxygen_script} \
	  --host_alias=${host_alias} --mode=xml $${srcdir} $${builddir} NO)

doc-xml-single-doxygen:
	@echo "Generating doxygen xml single file..."
	$(XSLTPROC) ${doxygen_outdir}/xml/combine.xslt \
	${doxygen_outdir}/xml/index.xml > ${doxygen_outdir}/xml/api-spine.xml;

doc-latex-doxygen:
	-(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
	  builddir=`cd ..; ${PWD_COMMAND}`; \
	  ${SHELL} ${doxygen_script} \
	  --host_alias=${host_alias} --mode=latex $${srcdir} $${builddir} NO)

# Chance of loooooonnggg creation time on this rule.
doc-pdf-doxygen: stamp-latex-doxygen
	-(cd ${doxygen_outdir}/latex && $(MAKE) -i pdf;)
	echo "Generating doxygen pdf file...";
	if [ -f ${doxygen_pdf} ]; then \
	  echo "... ${doxygen_pdf}"; \
	else \
	  echo "... error"; \
	  exit 12; \
	fi

stamp-pdf-doxygen:
	@if [ ! -f stamp-pdf-doxygen ]; then \
	  $(MAKE) doc-pdf-doxygen; \
	fi
	$(STAMP) stamp-pdf-doxygen

stamp-xml-doxygen:
	@if [ ! -f stamp-xml-doxygen ]; then \
	  $(MAKE) doc-xml-doxygen; \
	  $(MAKE) doc-xml-single-doxygen; \
	fi
	$(STAMP) stamp-xml-doxygen

stamp-latex-doxygen:
	@if [ ! -f stamp-latex-doxygen ]; then \
	  $(MAKE) doc-latex-doxygen; \
	fi
	$(STAMP) stamp-latex-doxygen

${docbook_outdir}/html:
	mkdir -p ${docbook_outdir}/html

${docbook_outdir}/pdf:
	mkdir -p ${docbook_outdir}/pdf

${docbook_outdir}/fo:
	mkdir -p ${docbook_outdir}/fo

${docbook_outdir}/xml:
	mkdir -p ${docbook_outdir}/xml
doc-xml-validate-docbook: $(xml_sources)
	@echo "Generating XML validation log..."
	$(XMLLINT) $(XMLLINT_FLAGS) ${top_srcdir}/doc/xml/spine.xml

doc-xml-single-docbook: $(xml_sources) ${docbook_outdir}/xml
	@echo "Generating XML single..."
	$(XMLLINT) --xinclude --noent --noblanks \
	-o ${docbook_outdir}/xml/spine-single.xml \
	${top_srcdir}/doc/xml/spine.xml

# HTML, index plus chapters
doc-html-docbook: $(xml_sources) ${docbook_outdir}/html
	@echo "Generating html files..."
	$(XSLTPROC) $(XSLTPROC_FLAGS) -o ${docbook_outdir}/html/ \
	$(XSL_HTML_STYLE) ${top_srcdir}/doc/xml/spine.xml

# HTML, all one page
doc-html-single-docbook: $(xml_sources) ${docbook_outdir}/html
	@echo "Generating html single file..."
	$(XSLTPROC) $(XSLTPROC_FLAGS) -o ${docbook_outdir}/html/ \
	$(XSL_HTML_SINGLE_STYLE) ${top_srcdir}/doc/xml/spine.xml

# FO
doc-fo-docbook: $(xml_sources) ${docbook_outdir}/fo
	@echo "Generating FO files..."
	$(XSLTPROC) $(XSLTPROC_FLAGS) -o ${docbook_outdir}/fo/spine.fo \
	$(XSL_FO_STYLE) ${top_srcdir}/doc/xml/spine.xml
doc-pdf-fop-xml-docbook: $(xml_sources) ${glibcxx_builddir}/doc/pdf
	@echo "Generating pdf fop files from xml..."
	$(FOP) $(FOP_FLAGS) -xml ${top_srcdir}/doc/xml/spine.xml \
	-xsl $(XSL_FO_STYLE) -pdf ${docbook_outdir}/pdf/spine.pdf

doc-pdf-fop-fo-docbook: $(xml_sources) ${glibcxx_builddir}/doc/pdf doc-fo
	@echo "Generating pdf fop files from fo..."
	$(FOP) $(FOP_FLAGS) -fo ${docbook_outdir}/fo/spine.fo \
	-pdf ${docbook_outdir}/pdf/spine.pdf
doc-pdf-xmlto-docbook: $(xml_sources) ${docbook_outdir}/pdf
	@echo "Generating pdf xmlto files..."
	$(XML2PDF) $(XML2PDF_FLAGS) ${top_srcdir}/doc/xml/spine.xml
doc-pdf-xmlroff-docbook: $(xml_sources) doc-fo
	@echo "Generating pdf xmlroff files..."
	$(XMLROFF) $(XMLROFF_FLAGS) ${docbook_outdir}/fo/spine.fo
doc-pdf-prince-docbook: $(xml_sources) ${docbook_outdir}/pdf
	@echo "Generating pdf prince files..."
	$(PRINCE) $(PRINCE_FLAGS) ${top_srcdir}/xml/spine.xml
doc-pdf-dblatex-docbook: $(xml_sources) ${docbook_outdir}/pdf
	@echo "Generating pdf dblatex files..."
	dblatex $(DBLATEX_FLAGS) ${top_srcdir}/doc/xml/spine.xml

doc-pdf-docbook: doc-pdf-dblatex-docbook
doc-html-performance:
	-@(chmod + ${doc_performance_script}; \
	${doc_performance_script} ${top_srcdir} \
	${glibcxx_builddir}/testsuite \
	${top_srcdir}/testsuite/data/make_graph_htmls.xml \
	${top_srcdir}/testsuite/data/make_graph_test_infos.xml local g++)

.PHONY: doc-doxygen-html doc-doxygen-man doc-performance

# To remove directories.
clean-local:
	rm -rf man html pdf fo xml doxygen docbook stamp*

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: