dnl aclocal.m4 generated automatically by aclocal 1.4 dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl This program is distributed in the hope that it will be useful, dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A dnl PARTICULAR PURPOSE. # serial 46 AC_PROG_LIBTOOL AC_DEFUN([AC_PROG_LIBTOOL], [AC_REQUIRE([_AC_PROG_LIBTOOL])dnl dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. AC_PROVIDE_IFELSE([AC_PROG_CXX], [AC_LIBTOOL_CXX], [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX ])]) dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. AC_PROVIDE_IFELSE([AC_PROG_GCJ], [AC_LIBTOOL_GCJ], [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], [AC_LIBTOOL_GCJ], [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], [AC_LIBTOOL_GCJ], [ifdef([AC_PROG_GCJ], [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ ])]) ifdef([A][M_PROG_GCJ], [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ ])]) ifdef([LT_AC_PROG_GCJ], [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ ])])])])])]) AC_DEFUN([_AC_PROG_LIBTOOL], [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl # Save cache, so that ltconfig can load it AC_CACHE_SAVE # Actually configure libtool. ac_aux_dir is where install-sh is found. AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \ AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \ objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \ deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ $libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \ || AC_MSG_ERROR([libtool configure failed]) # Reload cache, that may have been modified by ltconfig AC_CACHE_LOAD # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl # Redirect the config.log output again, so that the ltconfig log is not # clobbered by the next message. exec 5>>./config.log ]) AC_DEFUN([AC_LIBTOOL_SETUP], [AC_PREREQ(2.13)dnl AC_REQUIRE([AC_ENABLE_SHARED])dnl AC_REQUIRE([AC_ENABLE_STATIC])dnl AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_PROG_LD])dnl AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl AC_REQUIRE([AC_PROG_NM])dnl AC_REQUIRE([AC_PROG_LN_S])dnl AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl # Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! AC_REQUIRE([AC_OBJEXT])dnl AC_REQUIRE([AC_EXEEXT])dnl dnl # Only perform the check for file, if the check method requires it case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then AC_PATH_MAGIC fi ;; esac AC_CHECK_TOOL(RANLIB, ranlib, :) AC_CHECK_TOOL(STRIP, strip, :) # Check for any special flags to pass to ltconfig. libtool_flags="--cache-file=$cache_file" test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc" test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], [libtool_flags="$libtool_flags --enable-dlopen"]) ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], [libtool_flags="$libtool_flags --enable-win32-dll"]) AC_ARG_ENABLE(libtool-lock, [ --disable-libtool-lock avoid locking (might break parallel builds)]) test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock" test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" AC_ARG_WITH(pic, [ --with-pic try to use only PIC/non-PIC objects [default=use both]], pic_mode="$withval", pic_mode=default) test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic" test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic" # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in *-*-irix6*) # Find out which ABI we are using. echo '[#]line __oline__ "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi rm -rf conftest* ;; ia64-*-hpux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case "`/usr/bin/file conftest.o`" in *ELF-32*) HPUX_IA64_MODE="32" ;; *ELF-64*) HPUX_IA64_MODE="64" ;; esac fi rm -rf conftest* ;; x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case "`/usr/bin/file conftest.o`" in *32-bit*) case $host in x86_64-*linux*) LD="${LD-ld} -m elf_i386" ;; ppc64-*linux*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) LD="${LD-ld} -m elf_s390" ;; sparc64-*linux*) LD="${LD-ld} -m elf32_sparc" ;; esac ;; *64-bit*) case $host in x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; ppc*-*linux*|powerpc*-*linux*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*) LD="${LD-ld} -m elf64_s390" ;; sparc*-*linux*) LD="${LD-ld} -m elf64_sparc" ;; esac ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, [AC_LANG_SAVE AC_LANG_C AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) AC_LANG_RESTORE]) if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], [*-*-cygwin* | *-*-mingw* | *-*-pw32*) AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(AS, as, false) AC_CHECK_TOOL(OBJDUMP, objdump, false) # recent cygwin and mingw systems supply a stub DllMain which the user # can override, but on older systems we have to supply one AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain, [AC_TRY_LINK([], [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*); DllMain (0, 0, 0);], [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])]) case $host/$CC in *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*) # old mingw systems require "-dll" to link a DLL, while more recent ones # require "-mdll" SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -mdll" AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch, [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])]) CFLAGS="$SAVE_CFLAGS" ;; *-*-cygwin* | *-*-pw32*) # cygwin systems need to pass --dll to the linker, and not link # crt.o which will require a WinMain@16 definition. lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;; esac ;; ]) esac ]) # AC_LIBTOOL_DLOPEN - enable checks for dlopen support AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])]) # AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])]) # AC_ENABLE_SHARED - implement the --enable-shared flag # Usage: AC_ENABLE_SHARED[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. AC_DEFUN([AC_ENABLE_SHARED], [define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(shared, changequote(<<, >>)dnl << --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$ac_save_ifs" ;; esac], enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl ]) # AC_DISABLE_SHARED - set the default shared flag to --disable-shared AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_SHARED(no)]) # AC_ENABLE_STATIC - implement the --enable-static flag # Usage: AC_ENABLE_STATIC[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. AC_DEFUN([AC_ENABLE_STATIC], [define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(static, changequote(<<, >>)dnl << --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$ac_save_ifs" ;; esac], enable_static=AC_ENABLE_STATIC_DEFAULT)dnl ]) # AC_DISABLE_STATIC - set the default static flag to --disable-static AC_DEFUN([AC_DISABLE_STATIC], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_STATIC(no)]) # AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag # Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. AC_DEFUN([AC_ENABLE_FAST_INSTALL], [define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(fast-install, changequote(<<, >>)dnl << --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$ac_save_ifs" ;; esac], enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl ]) # AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install AC_DEFUN([AC_DISABLE_FAST_INSTALL], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_FAST_INSTALL(no)]) # AC_LIBTOOL_PICMODE - implement the --with-pic flag # Usage: AC_LIBTOOL_PICMODE[(MODE)] # Where MODE is either `yes' or `no'. If omitted, it defaults to # `both'. AC_DEFUN([AC_LIBTOOL_PICMODE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl pic_mode=ifelse($#,1,$1,default)]) # AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library AC_DEFUN([AC_PATH_TOOL_PREFIX], [AC_MSG_CHECKING([for $1]) AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, [case $MAGIC_CMD in /*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; ?:/*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. ;; *) ac_save_MAGIC_CMD="$MAGIC_CMD" IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" dnl $ac_dummy forces splitting on constant user-supplied paths. dnl POSIX.2 word splitting is done only on the output of word expansions, dnl not every word. This closes a longstanding sh security hole. ac_dummy="ifelse([$2], , $PATH, [$2])" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$1; then lt_cv_path_MAGIC_CMD="$ac_dir/$1" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | egrep "$file_magic_regex" > /dev/null; then : else cat <&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org EOF fi ;; esac fi break fi done IFS="$ac_save_ifs" MAGIC_CMD="$ac_save_MAGIC_CMD" ;; esac]) MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then AC_MSG_RESULT($MAGIC_CMD) else AC_MSG_RESULT(no) fi ]) # AC_PATH_MAGIC - find a file program which can recognise a shared library AC_DEFUN([AC_PATH_MAGIC], [AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH) if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH) else MAGIC_CMD=: fi fi ]) # AC_PROG_LD - find the path to the GNU or non-GNU linker AC_DEFUN([AC_PROG_LD], [AC_ARG_WITH(gnu-ld, [ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by GCC]) case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [[\\/]* | [A-Za-z]:[\\/]*)] re_direlt=['/[^/][^/]*/\.\./'] # Canonicalize the path of ld ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then AC_MSG_CHECKING([for GNU ld]) else AC_MSG_CHECKING([for non-GNU ld]) fi AC_CACHE_VAL(lt_cv_path_LD, [if test -z "$LD"; then IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then test "$with_gnu_ld" != no && break else test "$with_gnu_ld" != yes && break fi fi done IFS="$ac_save_ifs" else lt_cv_path_LD="$LD" # Let the user override the test with a path. fi]) LD="$lt_cv_path_LD" if test -n "$LD"; then AC_MSG_RESULT($LD) else AC_MSG_RESULT(no) fi test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) AC_PROG_LD_GNU ]) AC_DEFUN([AC_PROG_LD_GNU], [AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, [# I'd rather use --version here, but apparently some GNU ld's only accept -v. if $LD -v 2>&1 &5; then lt_cv_prog_gnu_ld=yes else lt_cv_prog_gnu_ld=no fi]) with_gnu_ld=$lt_cv_prog_gnu_ld ]) # AC_PROG_LD_RELOAD_FLAG - find reload flag for linker # -- PORTME Some linkers may need a different reload flag. AC_DEFUN([AC_PROG_LD_RELOAD_FLAG], [AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag, [lt_cv_ld_reload_flag='-r']) reload_flag=$lt_cv_ld_reload_flag test -n "$reload_flag" && reload_flag=" $reload_flag" ]) # AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies # -- PORTME fill in with the dynamic library characteristics # Don't cache this sucker. AC_DEFUN([AC_DEPLIBS_CHECK_METHOD], [AC_MSG_CHECKING([how to recognise dependant libraries]) lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_deplibs_check_method='unknown' # Need to set the preceding variable on all platforms that support # interlibrary dependencies. # 'none' -- dependencies not supported. # `unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. # 'test_compile' -- check by making test program. # 'file_magic [regex]' -- check by looking for files in library path # which responds to the $file_magic_cmd with a given egrep regex. # If you have `file' or equivalent on your system and you're not sure # whether `pass_all' will *always* work, you probably want this one. case $host_os in aix*) lt_cv_deplibs_check_method=pass_all ;; beos*) lt_cv_deplibs_check_method=pass_all ;; bsdi4*) lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'] lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=/shlib/libc.so ;; cygwin* | mingw* |pw32*) lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' lt_cv_file_magic_cmd='/usr/bin/file -L' case "$host_os" in rhapsody* | darwin1.[012]) lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System' ;; *) # Darwin 1.3 on lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' ;; esac ;; freebsd* ) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method=['file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'] lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; gnu*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20*|hpux11*) case $host_cpu in hppa*) [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'] lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; ia64*) [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'] lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; esac ;; irix5* | irix6*) case $host_os in irix5*) # this will be overridden with pass_all, but let us keep it just in case lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" ;; *) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac # this will be overridden with pass_all, but let us keep it just in case lt_cv_deplibs_check_method=["file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"] ;; esac lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` lt_cv_deplibs_check_method=pass_all ;; # This must be Linux ELF. linux-gnu*) case $host_cpu in alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* | x86_64* | sh*) lt_cv_deplibs_check_method=pass_all ;; # NB 2003-06-03: According to Alexandre Oliva, x86_64 should not be # in this list. However, it works around a libtool problem that # wrongly excludes -ldl/-lpthread from the libmudflap(th) dependencies. *) # glibc up to 2.1.1 does not perform some relocations on ARM lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'] ;; esac lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` ;; netbsd*) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'] else [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'] fi ;; newsos6) [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'] lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; osf3* | osf4* | osf5*) # this will be overridden with pass_all, but let us keep it just in case lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' lt_cv_file_magic_test_file=/shlib/libc.so lt_cv_deplibs_check_method=pass_all ;; sco3.2v5*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all lt_cv_file_magic_test_file=/lib/libc.so ;; [sysv5uw[78]* | sysv4*uw2*)] lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) case $host_vendor in ncr) lt_cv_deplibs_check_method=pass_all ;; motorola) lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'] lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; esac ;; esac file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method # NB: See above NB ... this is to make sure that the overriden # local libtool variant doesn't pollute the upstream cache unset lt_cv_file_magic_cmd unset lt_cv_deplibs_check_method AC_MSG_RESULT($deplibs_check_method) ]) # AC_PROG_NM - find the path to a BSD-compatible name lister AC_DEFUN([AC_PROG_NM], [AC_MSG_CHECKING([for BSD-compatible nm]) AC_CACHE_VAL(lt_cv_path_NM, [if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do test -z "$ac_dir" && ac_dir=. tmp_nm=$ac_dir/${ac_tool_prefix}nm if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then lt_cv_path_NM="$tmp_nm -B" break elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then lt_cv_path_NM="$tmp_nm -p" break else lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags fi fi done IFS="$ac_save_ifs" test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm fi]) NM="$lt_cv_path_NM" AC_MSG_RESULT([$NM]) ]) # AC_CHECK_LIBM - check for math library AC_DEFUN([AC_CHECK_LIBM], [AC_REQUIRE([AC_CANONICAL_HOST])dnl LIBM= case $host in *-*-beos* | *-*-cygwin* | *-*-pw32*) # These system don't have libm ;; *-ncr-sysv4.3*) AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") AC_CHECK_LIB(m, main, LIBM="$LIBM -lm") ;; *) AC_CHECK_LIB(m, main, LIBM="-lm") ;; esac ]) # AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for # the libltdl convenience library and INCLTDL to the include flags for # the libltdl header and adds --enable-ltdl-convenience to the # configure arguments. Note that LIBLTDL and INCLTDL are not # AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not # provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed # with '${top_builddir}/' and INCLTDL will be prefixed with # '${top_srcdir}/' (note the single quotes!). If your package is not # flat and you're not using automake, define top_builddir and # top_srcdir appropriately in the Makefiles. AC_DEFUN([AC_LIBLTDL_CONVENIENCE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl case $enable_ltdl_convenience in no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; "") enable_ltdl_convenience=yes ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; esac LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) ]) # AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for # the libltdl installable library and INCLTDL to the include flags for # the libltdl header and adds --enable-ltdl-install to the configure # arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is # AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed # libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will # be prefixed with '${top_builddir}/' and INCLTDL will be prefixed # with '${top_srcdir}/' (note the single quotes!). If your package is # not flat and you're not using automake, define top_builddir and # top_srcdir appropriately in the Makefiles. # In the future, this macro may have to be called after AC_PROG_LIBTOOL. AC_DEFUN([AC_LIBLTDL_INSTALLABLE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_CHECK_LIB(ltdl, main, [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], [if test x"$enable_ltdl_install" = xno; then AC_MSG_WARN([libltdl not installed, but installation disabled]) else enable_ltdl_install=yes fi ]) if test x"$enable_ltdl_install" = x"yes"; then ac_configure_args="$ac_configure_args --enable-ltdl-install" LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) else ac_configure_args="$ac_configure_args --enable-ltdl-install=no" LIBLTDL="-lltdl" INCLTDL= fi ]) # If this macro is not defined by Autoconf, define it here. ifdef([AC_PROVIDE_IFELSE], [], [define([AC_PROVIDE_IFELSE], [ifdef([AC_PROVIDE_$1], [$2], [$3])])]) # AC_LIBTOOL_CXX - enable support for C++ libraries AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_AC_LIBTOOL_CXX])]) AC_DEFUN([_AC_LIBTOOL_CXX], [AC_REQUIRE([AC_PROG_CXX]) AC_REQUIRE([AC_PROG_CXXCPP]) LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh" lt_save_CC="$CC" lt_save_CFLAGS="$CFLAGS" dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC dnl is set to the C++ compiler. AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \ MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \ AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \ objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \ deplibs_check_method="$deplibs_check_method" \ file_magic_cmd="$file_magic_cmd" \ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \ --build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \ || AC_MSG_ERROR([libtool tag configuration failed]) CC="$lt_save_CC" CFLAGS="$lt_save_CFLAGS" # Redirect the config.log output again, so that the ltconfig log is not # clobbered by the next message. exec 5>>./config.log ]) # AC_LIBTOOL_GCJ - enable support for GCJ libraries AC_DEFUN([AC_LIBTOOL_GCJ],[AC_REQUIRE([_AC_LIBTOOL_GCJ])]) AC_DEFUN([_AC_LIBTOOL_GCJ], [AC_REQUIRE([AC_PROG_LIBTOOL]) AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh" lt_save_CC="$CC" lt_save_CFLAGS="$CFLAGS" dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC dnl is set to the C++ compiler. AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="$CPPFLAGS" \ MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \ AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \ objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \ deplibs_check_method="$deplibs_check_method" \ file_magic_cmd="$file_magic_cmd" \ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \ --build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \ || AC_MSG_ERROR([libtool tag configuration failed]) CC="$lt_save_CC" CFLAGS="$lt_save_CFLAGS" # Redirect the config.log output again, so that the ltconfig log is not # clobbered by the next message. exec 5>>./config.log ]) dnl old names AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) dnl This is just to silence aclocal about the macro not being used ifelse([AC_DISABLE_FAST_INSTALL])dnl AC_DEFUN([LT_AC_PROG_GCJ], [AC_CHECK_TOOL(GCJ, gcj, no) test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" AC_SUBST(GCJFLAGS) ]) # Do all the work for Automake. This macro actually does too much -- # some checks are only needed if your package does certain things. # But this isn't really a big deal. # serial 1 dnl Usage: dnl AM_INIT_AUTOMAKE(package,version, [no-define]) AC_DEFUN(AM_INIT_AUTOMAKE, [AC_REQUIRE([AC_PROG_INSTALL]) PACKAGE=[$1] AC_SUBST(PACKAGE) VERSION=[$2] AC_SUBST(VERSION) dnl test to see if srcdir already configured if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi ifelse([$3],, AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])) AC_REQUIRE([AM_SANITY_CHECK]) AC_REQUIRE([AC_ARG_PROGRAM]) dnl FIXME This is truly gross. missing_dir=`cd $ac_aux_dir && pwd` AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir) AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir) AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) AC_REQUIRE([AC_PROG_MAKE_SET])]) # # Check to make sure that the build environment is sane. # AC_DEFUN(AM_SANITY_CHECK, [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 echo timestamp > conftestfile # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` if test "[$]*" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftestfile` fi if test "[$]*" != "X $srcdir/configure conftestfile" \ && test "[$]*" != "X conftestfile $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi test "[$]2" = conftestfile ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi rm -f conftest* AC_MSG_RESULT(yes)]) dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) dnl The program must properly implement --version. AC_DEFUN(AM_MISSING_PROG, [AC_MSG_CHECKING(for working $2) # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. if ($2 --version) < /dev/null > /dev/null 2>&1; then $1=$2 AC_MSG_RESULT(found) else $1="$3/missing $2" AC_MSG_RESULT(missing) fi AC_SUBST($1)]) # Add --enable-maintainer-mode option to configure. # From Jim Meyering # serial 1 AC_DEFUN(AM_MAINTAINER_MODE, [AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) dnl maintainer-mode is disabled by default AC_ARG_ENABLE(maintainer-mode, [ --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer], USE_MAINTAINER_MODE=$enableval, USE_MAINTAINER_MODE=no) AC_MSG_RESULT($USE_MAINTAINER_MODE) AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes) MAINT=$MAINTAINER_MODE_TRUE AC_SUBST(MAINT)dnl ] ) # Define a conditional. AC_DEFUN(AM_CONDITIONAL, [AC_SUBST($1_TRUE) AC_SUBST($1_FALSE) if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi]) # Like AC_CONFIG_HEADER, but automatically create stamp file. AC_DEFUN(AM_CONFIG_HEADER, [AC_PREREQ([2.12]) AC_CONFIG_HEADER([$1]) dnl When config.status generates a header, we must update the stamp-h file. dnl This file resides in the same directory as the config header dnl that is generated. We must strip everything past the first ":", dnl and everything past the last "/". AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>, <>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>, <>; do case " <<$>>CONFIG_HEADERS " in *" <<$>>am_file "*<<)>> echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx ;; esac am_indx=`expr "<<$>>am_indx" + 1` done<<>>dnl>>) changequote([,]))])