dnl aclocal.m4 generated automatically by aclocal 1.4-p6 dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl This program is distributed in the hope that it will be useful, dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A dnl PARTICULAR PURPOSE. sinclude(../config/accross.m4) AC_DEFUN(LIBGCJ_CONFIGURE, [ dnl Default to --enable-multilib AC_ARG_ENABLE(multilib, [ --enable-multilib build many library versions (default)], [case "${enableval}" in yes) multilib=yes ;; no) multilib=no ;; *) AC_MSG_ERROR(bad value ${enableval} for multilib option) ;; esac], [multilib=yes])dnl dnl We may get other options which we don't document: dnl --with-target-subdir, --with-multisrctop, --with-multisubdir # When building with srcdir == objdir, links to the source files will # be created in directories within the target_subdir. We have to # adjust toplevel_srcdir accordingly, so that configure finds # install-sh and other auxiliary files that live in the top-level # source directory. if test "${srcdir}" = "."; then if test -z "${with_target_subdir}"; then toprel=".." else if test "${with_target_subdir}" != "."; then toprel="${with_multisrctop}../.." else toprel="${with_multisrctop}.." fi fi else toprel=".." fi libgcj_basedir=$srcdir/$toprel/$1/libjava AC_SUBST(libgcj_basedir) AC_CONFIG_AUX_DIR(${srcdir}/$toprel) if :; then :; else # This overrides the previous occurrence for automake, but not for # autoconf, which is exactly what we want. AC_CONFIG_AUX_DIR(..) fi # This works around an automake problem. mkinstalldirs="`cd $ac_aux_dir && ${PWDCMD-pwd}`/mkinstalldirs" AC_SUBST(mkinstalldirs) AC_CANONICAL_SYSTEM dnl This shouldn't be needed, as long as top-level dependencies are dnl defined correctly and shared-library paths are set up so that dnl execution tests succeed. FIXME. define([AC_PROG_CC_WORKS],[]) define([AC_PROG_CXX_WORKS],[]) AC_PROG_CC # We use the libstdc++-v3 version of LIB_AC_PROG_CXX, but use # glibjava_CXX instead of glibcpp_CXX. That's because we're passed a # different definition of CXX than other directories, since we don't # depend on libstdc++-v3 having already been built. AC_DEFUN(LIB_AC_PROG_CXX, [AC_BEFORE([$0], [AC_PROG_CXXCPP])dnl dnl Fool anybody using AC_PROG_CXX. AC_PROVIDE([AC_PROG_CXX]) # Use glibjava_CXX so that we do not cause CXX to be cached with the # flags that come in CXX while configuring libjava. They're different # from those used for all other target libraries. If CXX is set in # the environment, respect that here. glibjava_CXX=$CXX AC_CHECK_PROGS(glibjava_CXX, $CCC c++ g++ gcc CC cxx cc++, gcc) AC_SUBST(CXX) CXX=$glibjava_CXX test -z "$glibjava_CXX" && AC_MSG_ERROR([no acceptable c++ found in \$PATH]) AC_PROG_CXX_GNU if test $ac_cv_prog_gxx = yes; then GXX=yes dnl Check whether -g works, even if CXXFLAGS is set, in case the package dnl plays around with CXXFLAGS (such as to build both debugging and dnl normal versions of a library), tasteless as that idea is. ac_test_CXXFLAGS="${CXXFLAGS+set}" ac_save_CXXFLAGS="$CXXFLAGS" CXXFLAGS= AC_PROG_CXX_G if test "$ac_test_CXXFLAGS" = set; then CXXFLAGS="$ac_save_CXXFLAGS" elif test $ac_cv_prog_cxx_g = yes; then CXXFLAGS="-g -O2" else CXXFLAGS="-O2" fi else GXX= test "${CXXFLAGS+set}" = set || CXXFLAGS="-g" fi ]) LIB_AC_PROG_CXX dnl version is pulled out to make it a bit easier to change using sed. version=0.0.7 dnl Still use "libjava" here to placate dejagnu. AM_INIT_AUTOMAKE(libjava, $version) AC_CHECK_TOOL(AS, as) AC_CHECK_TOOL(AR, ar) AC_CHECK_TOOL(RANLIB, ranlib, :) AC_PROG_INSTALL AM_MAINTAINER_MODE AC_EXEEXT # configure.host sets the following important variables # libgcj_cflags - host specific C compiler flags # libgcj_cxxflags - host specific C++ compiler flags # libgcj_javaflags - host specific Java compiler flags libgcj_cflags= libgcj_cxxflags= libgcj_javaflags= . [$]{srcdir}/configure.host LIBGCJ_CFLAGS="[$]{libgcj_cflags}" LIBGCJ_CXXFLAGS="[$]{libgcj_cxxflags}" LIBGCJ_JAVAFLAGS="[$]{libgcj_javaflags}" AC_SUBST(LIBGCJ_CFLAGS) AC_SUBST(LIBGCJ_CXXFLAGS) AC_SUBST(LIBGCJ_JAVAFLAGS) ])dnl sinclude(../libtool.m4) dnl The lines below arrange for aclocal not to bring libtool.m4 dnl AM_PROG_LIBTOOL into aclocal.m4, while still arranging for automake dnl to add a definition of LIBTOOL to Makefile.in. ifelse(yes,no,[ AC_DEFUN([AM_PROG_LIBTOOL],) AC_DEFUN([AC_LIBTOOL_DLOPEN],) AC_DEFUN([AC_LIBLTDL_CONVENIENCE],) AC_DEFUN([LT_AC_PROG_GCJ],) AC_SUBST(GCJ) AC_SUBST(LIBTOOL) ]) #serial AM2 dnl From Bruno Haible. AC_DEFUN([AM_ICONV], [ dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and dnl those with the standalone portable GNU libiconv installed). am_cv_lib_iconv_ldpath= AC_ARG_WITH([libiconv-prefix], [ --with-libiconv-prefix=DIR search for libiconv in DIR/include and DIR/lib], [ for dir in `echo "$withval" | tr : ' '`; do if test -d $dir/include; then CPPFLAGS="$CPPFLAGS -I$dir/include"; fi if test -d $dir/lib; then am_cv_lib_iconv_ldpath="-L$dir/lib"; fi done ]) AC_CACHE_CHECK(for iconv, am_cv_func_iconv, [ am_cv_func_iconv="no, consider installing GNU libiconv" am_cv_lib_iconv=no AC_TRY_LINK([#include #include ], [iconv_t cd = iconv_open("",""); iconv(cd,NULL,NULL,NULL,NULL); iconv_close(cd);], am_cv_func_iconv=yes) if test "$am_cv_func_iconv" != yes; then am_save_LIBS="$LIBS" LIBS="$LIBS $am_cv_libiconv_ldpath -liconv" AC_TRY_LINK([#include #include ], [iconv_t cd = iconv_open("",""); iconv(cd,NULL,NULL,NULL,NULL); iconv_close(cd);], am_cv_lib_iconv=yes am_cv_func_iconv=yes) LIBS="$am_save_LIBS" fi ]) if test "$am_cv_func_iconv" = yes; then AC_DEFINE(HAVE_ICONV, 1, [Define if you have the iconv() function.]) AC_MSG_CHECKING([for iconv declaration]) AC_CACHE_VAL(am_cv_proto_iconv, [ AC_TRY_COMPILE([ #include #include extern #ifdef __cplusplus "C" #endif #if defined(__STDC__) || defined(__cplusplus) size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); #else size_t iconv(); #endif ], [], am_cv_proto_iconv_arg1="", am_cv_proto_iconv_arg1="const") am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"]) am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'` AC_MSG_RESULT([$]{ac_t:- }[$]am_cv_proto_iconv) AC_DEFINE_UNQUOTED(ICONV_CONST, $am_cv_proto_iconv_arg1, [Define as const if the declaration of iconv() needs const.]) fi LIBICONV= if test "$am_cv_lib_iconv" = yes; then LIBICONV="$am_cv_lib_iconv_ldpath -liconv" fi AC_SUBST(LIBICONV) ]) # Check whether LC_MESSAGES is available in . # Ulrich Drepper , 1995. # # This file can be copied and used freely without restrictions. It can # be used in projects which are not available under the GNU General Public # License or the GNU Library General Public License but which still want # to provide support for the GNU gettext functionality. # Please note that the actual code of the GNU gettext library is covered # by the GNU Library General Public License, and the rest of the GNU # gettext package package is covered by the GNU General Public License. # They are *not* in the public domain. # serial 2 AC_DEFUN([AM_LC_MESSAGES], [AC_CHECK_HEADERS(locale.h) if test $ac_cv_header_locale_h = yes; then AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, [AC_TRY_LINK([#include ], [return LC_MESSAGES], am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) if test $am_cv_val_LC_MESSAGES = yes; then AC_DEFINE(HAVE_LC_MESSAGES, 1, [Define if your file defines LC_MESSAGES.]) fi fi]) AC_DEFUN([CHECK_FOR_BROKEN_MINGW_LD], [ AC_MSG_CHECKING(whether 'ld' is at least 2.13) LD_PROG=`$CC --print-prog-name=ld` LD_VERSION=`$LD_PROG --version` LD_VERSION_MAJOR=`echo "$LD_VERSION" | head -1 | cut -d '.' -f 1 | cut -d ' ' -f 4` LD_VERSION_MINOR=`echo "$LD_VERSION" | head -1 | cut -d '.' -f 2` if expr "$LD_VERSION_MAJOR" \> 2 > /dev/null; then LD_OK="ok" else if expr "$LD_VERSION_MAJOR" = 2 && expr "$LD_VERSION_MINOR" \>= 13 > /dev/null; then LD_OK="ok" fi fi if test "x$LD_OK" != x; then AC_MSG_RESULT([yes; major=$LD_VERSION_MAJOR, minor=$LD_VERSION_MINOR]) else AC_MSG_RESULT([no; major=$LD_VERSION_MAJOR, minor=$LD_VERSION_MINOR]) AC_MSG_WARN([ld <2.13 detected; enabling JV_LINKER_CANNOT_8BYTE_ALIGN_STATICS hack...]) AC_DEFINE(JV_LINKER_CANNOT_8BYTE_ALIGN_STATICS, 1, [Indicate that linker is not able to 8-byte align static data]) fi[]dnl ])# CHECK_FOR_BROKEN_MINGW_LD dnl PKG_CHECK_MODULES(GSTUFF, gtk+-2.0 >= 1.3 glib = 1.3.4, action-if, action-not) dnl defines GSTUFF_LIBS, GSTUFF_CFLAGS, see pkg-config man page dnl also defines GSTUFF_PKG_ERRORS on error AC_DEFUN(PKG_CHECK_MODULES, [ succeeded=no if test -z "$PKG_CONFIG"; then AC_PATH_PROG(PKG_CONFIG, pkg-config, no) fi if test "$PKG_CONFIG" = "no" ; then echo "*** The pkg-config script could not be found. Make sure it is" echo "*** in your path, or set the PKG_CONFIG environment variable" echo "*** to the full path to pkg-config." echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config." else PKG_CONFIG_MIN_VERSION=0.9.0 if $PKG_CONFIG --atleast-pkgconfig-version $PKG_CONFIG_MIN_VERSION; then AC_MSG_CHECKING(for $2) if $PKG_CONFIG --exists "$2" ; then AC_MSG_RESULT(yes) succeeded=yes AC_MSG_CHECKING($1_CFLAGS) $1_CFLAGS=`$PKG_CONFIG --cflags "$2"` AC_MSG_RESULT($$1_CFLAGS) AC_MSG_CHECKING($1_LIBS) $1_LIBS=`$PKG_CONFIG --libs "$2"` AC_MSG_RESULT($$1_LIBS) else $1_CFLAGS="" $1_LIBS="" ## If we have a custom action on failure, don't print errors, but ## do set a variable so people can do so. $1_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"` ifelse([$4], ,echo $$1_PKG_ERRORS,) fi AC_SUBST($1_CFLAGS) AC_SUBST($1_LIBS) else echo "*** Your version of pkg-config is too old. You need version $PKG_CONFIG_MIN_VERSION or newer." echo "*** See http://www.freedesktop.org/software/pkgconfig" fi fi if test $succeeded = yes; then ifelse([$3], , :, [$3]) else ifelse([$4], , AC_MSG_ERROR([Library requirements ($2) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them.]), [$4]) fi ]) # lib-prefix.m4 serial 3 (gettext-0.12.2) dnl Copyright (C) 2001-2003 Free Software Foundation, Inc. dnl This file is free software, distributed under the terms of the GNU dnl General Public License. As a special exception to the GNU General dnl Public License, this file may be distributed as part of a program dnl that contains a configuration script generated by Autoconf, under dnl the same distribution terms as the rest of that program. dnl From Bruno Haible. dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't dnl require excessive bracketing. ifdef([AC_HELP_STRING], [AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])], [AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])]) dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed dnl to access previously installed libraries. The basic assumption is that dnl a user will want packages to use other packages he previously installed dnl with the same --prefix option. dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate dnl libraries, but is otherwise very convenient. AC_DEFUN([AC_LIB_PREFIX], [ AC_BEFORE([$0], [AC_LIB_LINKFLAGS]) AC_REQUIRE([AC_PROG_CC]) AC_REQUIRE([AC_CANONICAL_HOST]) AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) dnl By default, look in $includedir and $libdir. use_additional=yes AC_LIB_WITH_FINAL_PREFIX([ eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" ]) AC_LIB_ARG_WITH([lib-prefix], [ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib --without-lib-prefix don't search for libraries in includedir and libdir], [ if test "X$withval" = "Xno"; then use_additional=no else if test "X$withval" = "X"; then AC_LIB_WITH_FINAL_PREFIX([ eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" ]) else additional_includedir="$withval/include" additional_libdir="$withval/lib" fi fi ]) if test $use_additional = yes; then dnl Potentially add $additional_includedir to $CPPFLAGS. dnl But don't add it dnl 1. if it's the standard /usr/include, dnl 2. if it's already present in $CPPFLAGS, dnl 3. if it's /usr/local/include and we are using GCC on Linux, dnl 4. if it doesn't exist as a directory. if test "X$additional_includedir" != "X/usr/include"; then haveit= for x in $CPPFLAGS; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-I$additional_includedir"; then haveit=yes break fi done if test -z "$haveit"; then if test "X$additional_includedir" = "X/usr/local/include"; then if test -n "$GCC"; then case $host_os in linux*) haveit=yes;; esac fi fi if test -z "$haveit"; then if test -d "$additional_includedir"; then dnl Really add $additional_includedir to $CPPFLAGS. CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir" fi fi fi fi dnl Potentially add $additional_libdir to $LDFLAGS. dnl But don't add it dnl 1. if it's the standard /usr/lib, dnl 2. if it's already present in $LDFLAGS, dnl 3. if it's /usr/local/lib and we are using GCC on Linux, dnl 4. if it doesn't exist as a directory. if test "X$additional_libdir" != "X/usr/lib"; then haveit= for x in $LDFLAGS; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test "X$additional_libdir" = "X/usr/local/lib"; then if test -n "$GCC"; then case $host_os in linux*) haveit=yes;; esac fi fi if test -z "$haveit"; then if test -d "$additional_libdir"; then dnl Really add $additional_libdir to $LDFLAGS. LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir" fi fi fi fi fi ]) dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix, dnl acl_final_exec_prefix, containing the values to which $prefix and dnl $exec_prefix will expand at the end of the configure script. AC_DEFUN([AC_LIB_PREPARE_PREFIX], [ dnl Unfortunately, prefix and exec_prefix get only finally determined dnl at the end of configure. if test "X$prefix" = "XNONE"; then acl_final_prefix="$ac_default_prefix" else acl_final_prefix="$prefix" fi if test "X$exec_prefix" = "XNONE"; then acl_final_exec_prefix='${prefix}' else acl_final_exec_prefix="$exec_prefix" fi acl_save_prefix="$prefix" prefix="$acl_final_prefix" eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" prefix="$acl_save_prefix" ]) dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the dnl variables prefix and exec_prefix bound to the values they will have dnl at the end of the configure script. AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX], [ acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" $1 exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" ]) # lib-link.m4 serial 4 (gettext-0.12) dnl Copyright (C) 2001-2003 Free Software Foundation, Inc. dnl This file is free software, distributed under the terms of the GNU dnl General Public License. As a special exception to the GNU General dnl Public License, this file may be distributed as part of a program dnl that contains a configuration script generated by Autoconf, under dnl the same distribution terms as the rest of that program. dnl From Bruno Haible. dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and dnl the libraries corresponding to explicit and implicit dependencies. dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and dnl augments the CPPFLAGS variable. AC_DEFUN([AC_LIB_LINKFLAGS], [ AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) AC_REQUIRE([AC_LIB_RPATH]) define([Name],[translit([$1],[./-], [___])]) define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [ AC_LIB_LINKFLAGS_BODY([$1], [$2]) ac_cv_lib[]Name[]_libs="$LIB[]NAME" ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME" ac_cv_lib[]Name[]_cppflags="$INC[]NAME" ]) LIB[]NAME="$ac_cv_lib[]Name[]_libs" LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs" INC[]NAME="$ac_cv_lib[]Name[]_cppflags" AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) AC_SUBST([LIB]NAME) AC_SUBST([LTLIB]NAME) dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the dnl results of this search when this library appears as a dependency. HAVE_LIB[]NAME=yes undefine([Name]) undefine([NAME]) ]) dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode) dnl searches for libname and the libraries corresponding to explicit and dnl implicit dependencies, together with the specified include files and dnl the ability to compile and link the specified testcode. If found, it dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty. AC_DEFUN([AC_LIB_HAVE_LINKFLAGS], [ AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) AC_REQUIRE([AC_LIB_RPATH]) define([Name],[translit([$1],[./-], [___])]) define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME dnl accordingly. AC_LIB_LINKFLAGS_BODY([$1], [$2]) dnl Add $INC[]NAME to CPPFLAGS before performing the following checks, dnl because if the user has installed lib[]Name and not disabled its use dnl via --without-lib[]Name-prefix, he wants to use it. ac_save_CPPFLAGS="$CPPFLAGS" AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [ ac_save_LIBS="$LIBS" LIBS="$LIBS $LIB[]NAME" AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no]) LIBS="$ac_save_LIBS" ]) if test "$ac_cv_lib[]Name" = yes; then HAVE_LIB[]NAME=yes AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.]) AC_MSG_CHECKING([how to link with lib[]$1]) AC_MSG_RESULT([$LIB[]NAME]) else HAVE_LIB[]NAME=no dnl If $LIB[]NAME didn't lead to a usable library, we don't need dnl $INC[]NAME either. CPPFLAGS="$ac_save_CPPFLAGS" LIB[]NAME= LTLIB[]NAME= fi AC_SUBST([HAVE_LIB]NAME) AC_SUBST([LIB]NAME) AC_SUBST([LTLIB]NAME) undefine([Name]) undefine([NAME]) ]) dnl Determine the platform dependent parameters needed to use rpath: dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator, dnl hardcode_direct, hardcode_minus_L. AC_DEFUN([AC_LIB_RPATH], [ AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh . ./conftest.sh rm -f ./conftest.sh acl_cv_rpath=done ]) wl="$acl_cv_wl" libext="$acl_cv_libext" shlibext="$acl_cv_shlibext" hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" hardcode_direct="$acl_cv_hardcode_direct" hardcode_minus_L="$acl_cv_hardcode_minus_L" dnl Determine whether the user wants rpath handling at all. AC_ARG_ENABLE(rpath, [ --disable-rpath do not hardcode runtime library paths], :, enable_rpath=yes) ]) dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and dnl the libraries corresponding to explicit and implicit dependencies. dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables. AC_DEFUN([AC_LIB_LINKFLAGS_BODY], [ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) dnl By default, look in $includedir and $libdir. use_additional=yes AC_LIB_WITH_FINAL_PREFIX([ eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" ]) AC_LIB_ARG_WITH([lib$1-prefix], [ --with-lib$1-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib --without-lib$1-prefix don't search for lib$1 in includedir and libdir], [ if test "X$withval" = "Xno"; then use_additional=no else if test "X$withval" = "X"; then AC_LIB_WITH_FINAL_PREFIX([ eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" ]) else additional_includedir="$withval/include" additional_libdir="$withval/lib" fi fi ]) dnl Search the library and its dependencies in $additional_libdir and dnl $LDFLAGS. Using breadth-first-seach. LIB[]NAME= LTLIB[]NAME= INC[]NAME= rpathdirs= ltrpathdirs= names_already_handled= names_next_round='$1 $2' while test -n "$names_next_round"; do names_this_round="$names_next_round" names_next_round= for name in $names_this_round; do already_handled= for n in $names_already_handled; do if test "$n" = "$name"; then already_handled=yes break fi done if test -z "$already_handled"; then names_already_handled="$names_already_handled $name" dnl See if it was already located by an earlier AC_LIB_LINKFLAGS dnl or AC_LIB_HAVE_LINKFLAGS call. uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` eval value=\"\$HAVE_LIB$uppername\" if test -n "$value"; then if test "$value" = yes; then eval value=\"\$LIB$uppername\" test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value" eval value=\"\$LTLIB$uppername\" test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value" else dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined dnl that this library doesn't exist. So just drop it. : fi else dnl Search the library lib$name in $additional_libdir and $LDFLAGS dnl and the already constructed $LIBNAME/$LTLIBNAME. found_dir= found_la= found_so= found_a= if test $use_additional = yes; then if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then found_dir="$additional_libdir" found_so="$additional_libdir/lib$name.$shlibext" if test -f "$additional_libdir/lib$name.la"; then found_la="$additional_libdir/lib$name.la" fi else if test -f "$additional_libdir/lib$name.$libext"; then found_dir="$additional_libdir" found_a="$additional_libdir/lib$name.$libext" if test -f "$additional_libdir/lib$name.la"; then found_la="$additional_libdir/lib$name.la" fi fi fi fi if test "X$found_dir" = "X"; then for x in $LDFLAGS $LTLIB[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) case "$x" in -L*) dir=`echo "X$x" | sed -e 's/^X-L//'` if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then found_dir="$dir" found_so="$dir/lib$name.$shlibext" if test -f "$dir/lib$name.la"; then found_la="$dir/lib$name.la" fi else if test -f "$dir/lib$name.$libext"; then found_dir="$dir" found_a="$dir/lib$name.$libext" if test -f "$dir/lib$name.la"; then found_la="$dir/lib$name.la" fi fi fi ;; esac if test "X$found_dir" != "X"; then break fi done fi if test "X$found_dir" != "X"; then dnl Found the library. LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name" if test "X$found_so" != "X"; then dnl Linking with a shared library. We attempt to hardcode its dnl directory into the executable's runpath, unless it's the dnl standard /usr/lib. if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then dnl No hardcoding is needed. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" else dnl Use an explicit option to hardcode DIR into the resulting dnl binary. dnl Potentially add DIR to ltrpathdirs. dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. haveit= for x in $ltrpathdirs; do if test "X$x" = "X$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then ltrpathdirs="$ltrpathdirs $found_dir" fi dnl The hardcoding into $LIBNAME is system dependent. if test "$hardcode_direct" = yes; then dnl Using DIR/libNAME.so during linking hardcodes DIR into the dnl resulting binary. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" else if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then dnl Use an explicit option to hardcode DIR into the resulting dnl binary. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" dnl Potentially add DIR to rpathdirs. dnl The rpathdirs will be appended to $LIBNAME at the end. haveit= for x in $rpathdirs; do if test "X$x" = "X$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then rpathdirs="$rpathdirs $found_dir" fi else dnl Rely on "-L$found_dir". dnl But don't add it if it's already contained in the LDFLAGS dnl or the already constructed $LIBNAME haveit= for x in $LDFLAGS $LIB[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-L$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir" fi if test "$hardcode_minus_L" != no; then dnl FIXME: Not sure whether we should use dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" dnl here. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" else dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH dnl here, because this doesn't fit in flags passed to the dnl compiler. So give up. No hardcoding. This affects only dnl very old systems. dnl FIXME: Not sure whether we should use dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" dnl here. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" fi fi fi fi else if test "X$found_a" != "X"; then dnl Linking with a static library. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a" else dnl We shouldn't come here, but anyway it's good to have a dnl fallback. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name" fi fi dnl Assume the include files are nearby. additional_includedir= case "$found_dir" in */lib | */lib/) basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'` additional_includedir="$basedir/include" ;; esac if test "X$additional_includedir" != "X"; then dnl Potentially add $additional_includedir to $INCNAME. dnl But don't add it dnl 1. if it's the standard /usr/include, dnl 2. if it's /usr/local/include and we are using GCC on Linux, dnl 3. if it's already present in $CPPFLAGS or the already dnl constructed $INCNAME, dnl 4. if it doesn't exist as a directory. if test "X$additional_includedir" != "X/usr/include"; then haveit= if test "X$additional_includedir" = "X/usr/local/include"; then if test -n "$GCC"; then case $host_os in linux*) haveit=yes;; esac fi fi if test -z "$haveit"; then for x in $CPPFLAGS $INC[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-I$additional_includedir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_includedir"; then dnl Really add $additional_includedir to $INCNAME. INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir" fi fi fi fi fi dnl Look for dependencies. if test -n "$found_la"; then dnl Read the .la file. It defines the variables dnl dlname, library_names, old_library, dependency_libs, current, dnl age, revision, installed, dlopen, dlpreopen, libdir. save_libdir="$libdir" case "$found_la" in */* | *\\*) . "$found_la" ;; *) . "./$found_la" ;; esac libdir="$save_libdir" dnl We use only dependency_libs. for dep in $dependency_libs; do case "$dep" in -L*) additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME. dnl But don't add it dnl 1. if it's the standard /usr/lib, dnl 2. if it's /usr/local/lib and we are using GCC on Linux, dnl 3. if it's already present in $LDFLAGS or the already dnl constructed $LIBNAME, dnl 4. if it doesn't exist as a directory. if test "X$additional_libdir" != "X/usr/lib"; then haveit= if test "X$additional_libdir" = "X/usr/local/lib"; then if test -n "$GCC"; then case $host_os in linux*) haveit=yes;; esac fi fi if test -z "$haveit"; then haveit= for x in $LDFLAGS $LIB[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_libdir"; then dnl Really add $additional_libdir to $LIBNAME. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir" fi fi haveit= for x in $LDFLAGS $LTLIB[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_libdir"; then dnl Really add $additional_libdir to $LTLIBNAME. LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir" fi fi fi fi ;; -R*) dir=`echo "X$dep" | sed -e 's/^X-R//'` if test "$enable_rpath" != no; then dnl Potentially add DIR to rpathdirs. dnl The rpathdirs will be appended to $LIBNAME at the end. haveit= for x in $rpathdirs; do if test "X$x" = "X$dir"; then haveit=yes break fi done if test -z "$haveit"; then rpathdirs="$rpathdirs $dir" fi dnl Potentially add DIR to ltrpathdirs. dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. haveit= for x in $ltrpathdirs; do if test "X$x" = "X$dir"; then haveit=yes break fi done if test -z "$haveit"; then ltrpathdirs="$ltrpathdirs $dir" fi fi ;; -l*) dnl Handle this in the next round. names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` ;; *.la) dnl Handle this in the next round. Throw away the .la's dnl directory; it is already contained in a preceding -L dnl option. names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` ;; *) dnl Most likely an immediate library name. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep" LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep" ;; esac done fi else dnl Didn't find the library; assume it is in the system directories dnl known to the linker and runtime loader. (All the system dnl directories known to the linker should also be known to the dnl runtime loader, otherwise the system is severely misconfigured.) LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name" fi fi fi done done if test "X$rpathdirs" != "X"; then if test -n "$hardcode_libdir_separator"; then dnl Weird platform: only the last -rpath option counts, the user must dnl pass all path elements in one option. We can arrange that for a dnl single library, but not when more than one $LIBNAMEs are used. alldirs= for found_dir in $rpathdirs; do alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir" done dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl. acl_save_libdir="$libdir" libdir="$alldirs" eval flag=\"$hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" else dnl The -rpath options are cumulative. for found_dir in $rpathdirs; do acl_save_libdir="$libdir" libdir="$found_dir" eval flag=\"$hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" done fi fi if test "X$ltrpathdirs" != "X"; then dnl When using libtool, the option that works for both libraries and dnl executables is -R. The -R options are cumulative. for found_dir in $ltrpathdirs; do LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir" done fi ]) dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR, dnl unless already present in VAR. dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes dnl contains two or three consecutive elements that belong together. AC_DEFUN([AC_LIB_APPENDTOVAR], [ for element in [$2]; do haveit= for x in $[$1]; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X$element"; then haveit=yes break fi done if test -z "$haveit"; then [$1]="${[$1]}${[$1]:+ }$element" fi done ]) # lib-ld.m4 serial 2 (gettext-0.12) dnl Copyright (C) 1996-2003 Free Software Foundation, Inc. dnl This file is free software, distributed under the terms of the GNU dnl General Public License. As a special exception to the GNU General dnl Public License, this file may be distributed as part of a program dnl that contains a configuration script generated by Autoconf, under dnl the same distribution terms as the rest of that program. dnl Subroutines of libtool.m4, dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision dnl with libtool.m4. dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no. AC_DEFUN([AC_LIB_PROG_LD_GNU], [AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld, [# I'd rather use --version here, but apparently some GNU ld's only accept -v. if $LD -v 2>&1 &5; then acl_cv_prog_gnu_ld=yes else acl_cv_prog_gnu_ld=no fi]) with_gnu_ld=$acl_cv_prog_gnu_ld ]) dnl From libtool-1.4. Sets the variable LD. AC_DEFUN([AC_LIB_PROG_LD], [AC_ARG_WITH(gnu-ld, [ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl # Prepare PATH_SEPARATOR. # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by GCC]) case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [[\\/]* | [A-Za-z]:[\\/]*)] [re_direlt='/[^/][^/]*/\.\./'] # Canonicalize the path of ld ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then AC_MSG_CHECKING([for GNU ld]) else AC_MSG_CHECKING([for non-GNU ld]) fi AC_CACHE_VAL(acl_cv_path_LD, [if test -z "$LD"; then IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then acl_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. if "$acl_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then test "$with_gnu_ld" != no && break else test "$with_gnu_ld" != yes && break fi fi done IFS="$ac_save_ifs" else acl_cv_path_LD="$LD" # Let the user override the test with a path. fi]) LD="$acl_cv_path_LD" if test -n "$LD"; then AC_MSG_RESULT($LD) else AC_MSG_RESULT(no) fi test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) AC_LIB_PROG_LD_GNU ]) # Do all the work for Automake. This macro actually does too much -- # some checks are only needed if your package does certain things. # But this isn't really a big deal. # serial 1 dnl Usage: dnl AM_INIT_AUTOMAKE(package,version, [no-define]) AC_DEFUN([AM_INIT_AUTOMAKE], [AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL]) PACKAGE=[$1] AC_SUBST(PACKAGE) VERSION=[$2] AC_SUBST(VERSION) dnl test to see if srcdir already configured if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi ifelse([$3],, AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])) AC_REQUIRE([AM_SANITY_CHECK]) AC_REQUIRE([AC_ARG_PROGRAM]) dnl FIXME This is truly gross. missing_dir=`cd $ac_aux_dir && pwd` AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}, $missing_dir) AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}, $missing_dir) AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) AC_REQUIRE([AC_PROG_MAKE_SET])]) # Copyright 2002 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.4"]) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION so it can be traced. # This function is AC_REQUIREd by AC_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.4-p6])]) # # Check to make sure that the build environment is sane. # AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 echo timestamp > conftestfile # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` if test "[$]*" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftestfile` fi if test "[$]*" != "X $srcdir/configure conftestfile" \ && test "[$]*" != "X conftestfile $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi test "[$]2" = conftestfile ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi rm -f conftest* AC_MSG_RESULT(yes)]) dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) dnl The program must properly implement --version. AC_DEFUN([AM_MISSING_PROG], [AC_MSG_CHECKING(for working $2) # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. if ($2 --version) < /dev/null > /dev/null 2>&1; then $1=$2 AC_MSG_RESULT(found) else $1="$3/missing $2" AC_MSG_RESULT(missing) fi AC_SUBST($1)]) # Add --enable-maintainer-mode option to configure. # From Jim Meyering # serial 1 AC_DEFUN([AM_MAINTAINER_MODE], [AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) dnl maintainer-mode is disabled by default AC_ARG_ENABLE(maintainer-mode, [ --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer], USE_MAINTAINER_MODE=$enableval, USE_MAINTAINER_MODE=no) AC_MSG_RESULT($USE_MAINTAINER_MODE) AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes) MAINT=$MAINTAINER_MODE_TRUE AC_SUBST(MAINT)dnl ] ) # Define a conditional. AC_DEFUN([AM_CONDITIONAL], [AC_SUBST($1_TRUE) AC_SUBST($1_FALSE) if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi]) # Like AC_CONFIG_HEADER, but automatically create stamp file. AC_DEFUN([AM_CONFIG_HEADER], [AC_PREREQ([2.12]) AC_CONFIG_HEADER([$1]) dnl When config.status generates a header, we must update the stamp-h file. dnl This file resides in the same directory as the config header dnl that is generated. We must strip everything past the first ":", dnl and everything past the last "/". AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>, <>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>, <>; do case " <<$>>CONFIG_HEADERS " in *" <<$>>am_file "*<<)>> echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx ;; esac am_indx=`expr "<<$>>am_indx" + 1` done<<>>dnl>>) changequote([,]))]) # Configure paths for GTK+ # Owen Taylor 1997-2001 dnl AM_PATH_GTK_2_0([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]]) dnl Test for GTK+, and define GTK_CFLAGS and GTK_LIBS, if gthread is specified in MODULES, dnl pass to pkg-config dnl AC_DEFUN(AM_PATH_GTK_2_0, [dnl dnl Get the cflags and libraries from pkg-config dnl AC_ARG_ENABLE(gtktest, [ --disable-gtktest do not try to compile and run a test GTK+ program], , enable_gtktest=yes) pkg_config_args=gtk+-2.0 for module in . $4 do case "$module" in gthread) pkg_config_args="$pkg_config_args gthread-2.0" ;; esac done no_gtk="" AC_PATH_PROG(PKG_CONFIG, pkg-config, no) if test x$PKG_CONFIG != xno ; then if pkg-config --atleast-pkgconfig-version 0.7 ; then : else echo *** pkg-config too old; version 0.7 or better required. no_gtk=yes PKG_CONFIG=no fi else no_gtk=yes fi min_gtk_version=ifelse([$1], ,2.0.0,$1) AC_MSG_CHECKING(for GTK+ - version >= $min_gtk_version) if test x$PKG_CONFIG != xno ; then ## don't try to run the test against uninstalled libtool libs if $PKG_CONFIG --uninstalled $pkg_config_args; then echo "Will use uninstalled version of GTK+ found in PKG_CONFIG_PATH" enable_gtktest=no fi if $PKG_CONFIG --atleast-version $min_gtk_version $pkg_config_args; then : else no_gtk=yes fi fi if test x"$no_gtk" = x ; then GTK_CFLAGS=`$PKG_CONFIG $pkg_config_args --cflags` GTK_LIBS=`$PKG_CONFIG $pkg_config_args --libs` gtk_config_major_version=`$PKG_CONFIG --modversion gtk+-2.0 | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` gtk_config_minor_version=`$PKG_CONFIG --modversion gtk+-2.0 | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` gtk_config_micro_version=`$PKG_CONFIG --modversion gtk+-2.0 | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` if test "x$enable_gtktest" = "xyes" ; then ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $GTK_CFLAGS" LIBS="$GTK_LIBS $LIBS" dnl dnl Now check if the installed GTK+ is sufficiently new. (Also sanity dnl checks the results of pkg-config to some extent) dnl rm -f conf.gtktest AC_TRY_RUN([ #include #include #include int main () { int major, minor, micro; char *tmp_version; system ("touch conf.gtktest"); /* HP/UX 9 (%@#!) writes to sscanf strings */ tmp_version = g_strdup("$min_gtk_version"); if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { printf("%s, bad version string\n", "$min_gtk_version"); exit(1); } if ((gtk_major_version != $gtk_config_major_version) || (gtk_minor_version != $gtk_config_minor_version) || (gtk_micro_version != $gtk_config_micro_version)) { printf("\n*** 'pkg-config --modversion gtk+-2.0' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n", $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version, gtk_major_version, gtk_minor_version, gtk_micro_version); printf ("*** was found! If pkg-config was correct, then it is best\n"); printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n"); printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n"); printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); printf("*** required on your system.\n"); printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n"); printf("*** to point to the correct configuration files\n"); } else if ((gtk_major_version != GTK_MAJOR_VERSION) || (gtk_minor_version != GTK_MINOR_VERSION) || (gtk_micro_version != GTK_MICRO_VERSION)) { printf("*** GTK+ header files (version %d.%d.%d) do not match\n", GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION); printf("*** library (version %d.%d.%d)\n", gtk_major_version, gtk_minor_version, gtk_micro_version); } else { if ((gtk_major_version > major) || ((gtk_major_version == major) && (gtk_minor_version > minor)) || ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro))) { return 0; } else { printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n", gtk_major_version, gtk_minor_version, gtk_micro_version); printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n", major, minor, micro); printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n"); printf("***\n"); printf("*** If you have already installed a sufficiently new version, this error\n"); printf("*** probably means that the wrong copy of the pkg-config shell script is\n"); printf("*** being found. The easiest way to fix this is to remove the old version\n"); printf("*** of GTK+, but you can also set the PKG_CONFIG environment to point to the\n"); printf("*** correct copy of pkg-config. (In this case, you will have to\n"); printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); printf("*** so that the correct libraries are found at run-time))\n"); } } return 1; } ],, no_gtk=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi if test "x$no_gtk" = x ; then AC_MSG_RESULT(yes (version $gtk_config_major_version.$gtk_config_minor_version.$gtk_config_micro_version)) ifelse([$2], , :, [$2]) else AC_MSG_RESULT(no) if test "$PKG_CONFIG" = "no" ; then echo "*** A new enough version of pkg-config was not found." echo "*** See http://pkgconfig.sourceforge.net" else if test -f conf.gtktest ; then : else echo "*** Could not run GTK+ test program, checking why..." ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $GTK_CFLAGS" LIBS="$LIBS $GTK_LIBS" AC_TRY_LINK([ #include #include ], [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ], [ echo "*** The test program compiled, but did not run. This usually means" echo "*** that the run-time linker is not finding GTK+ or finding the wrong" echo "*** version of GTK+. If it is not finding GTK+, you'll need to set your" echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" echo "*** to the installed location Also, make sure you have run ldconfig if that" echo "*** is required on your system" echo "***" echo "*** If you have an old version installed, it is best to remove it, although" echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ], [ echo "*** The test program failed to compile or link. See the file config.log for the" echo "*** exact error that occured. This usually means GTK+ is incorrectly installed."]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi GTK_CFLAGS="" GTK_LIBS="" ifelse([$3], , :, [$3]) fi AC_SUBST(GTK_CFLAGS) AC_SUBST(GTK_LIBS) rm -f conf.gtktest ]) # Configure paths for GLIB # Owen Taylor 1997-2001 dnl AM_PATH_GLIB_2_0([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]]) dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if gmodule, gobject or dnl gthread is specified in MODULES, pass to pkg-config dnl AC_DEFUN(AM_PATH_GLIB_2_0, [dnl dnl Get the cflags and libraries from pkg-config dnl AC_ARG_ENABLE(glibtest, [ --disable-glibtest do not try to compile and run a test GLIB program], , enable_glibtest=yes) pkg_config_args=glib-2.0 for module in . $4 do case "$module" in gmodule) pkg_config_args="$pkg_config_args gmodule-2.0" ;; gobject) pkg_config_args="$pkg_config_args gobject-2.0" ;; gthread) pkg_config_args="$pkg_config_args gthread-2.0" ;; esac done AC_PATH_PROG(PKG_CONFIG, pkg-config, no) no_glib="" if test x$PKG_CONFIG != xno ; then if $PKG_CONFIG --atleast-pkgconfig-version 0.7 ; then : else echo *** pkg-config too old; version 0.7 or better required. no_glib=yes PKG_CONFIG=no fi else no_glib=yes fi min_glib_version=ifelse([$1], ,2.0.0,$1) AC_MSG_CHECKING(for GLIB - version >= $min_glib_version) if test x$PKG_CONFIG != xno ; then ## don't try to run the test against uninstalled libtool libs if $PKG_CONFIG --uninstalled $pkg_config_args; then echo "Will use uninstalled version of GLib found in PKG_CONFIG_PATH" enable_glibtest=no fi if $PKG_CONFIG --atleast-version $min_glib_version $pkg_config_args; then : else no_glib=yes fi fi if test x"$no_glib" = x ; then GLIB_GENMARSHAL=`$PKG_CONFIG --variable=glib_genmarshal glib-2.0` GOBJECT_QUERY=`$PKG_CONFIG --variable=gobject_query glib-2.0` GLIB_MKENUMS=`$PKG_CONFIG --variable=glib_mkenums glib-2.0` GLIB_CFLAGS=`$PKG_CONFIG --cflags $pkg_config_args` GLIB_LIBS=`$PKG_CONFIG --libs $pkg_config_args` glib_config_major_version=`$PKG_CONFIG --modversion glib-2.0 | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` glib_config_minor_version=`$PKG_CONFIG --modversion glib-2.0 | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` glib_config_micro_version=`$PKG_CONFIG --modversion glib-2.0 | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` if test "x$enable_glibtest" = "xyes" ; then ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $GLIB_CFLAGS" LIBS="$GLIB_LIBS $LIBS" dnl dnl Now check if the installed GLIB is sufficiently new. (Also sanity dnl checks the results of pkg-config to some extent) dnl rm -f conf.glibtest AC_TRY_RUN([ #include #include #include int main () { int major, minor, micro; char *tmp_version; system ("touch conf.glibtest"); /* HP/UX 9 (%@#!) writes to sscanf strings */ tmp_version = g_strdup("$min_glib_version"); if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { printf("%s, bad version string\n", "$min_glib_version"); exit(1); } if ((glib_major_version != $glib_config_major_version) || (glib_minor_version != $glib_config_minor_version) || (glib_micro_version != $glib_config_micro_version)) { printf("\n*** 'pkg-config --modversion glib-2.0' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version, glib_major_version, glib_minor_version, glib_micro_version); printf ("*** was found! If pkg-config was correct, then it is best\n"); printf ("*** to remove the old version of GLib. You may also be able to fix the error\n"); printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n"); printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); printf("*** required on your system.\n"); printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n"); printf("*** to point to the correct configuration files\n"); } else if ((glib_major_version != GLIB_MAJOR_VERSION) || (glib_minor_version != GLIB_MINOR_VERSION) || (glib_micro_version != GLIB_MICRO_VERSION)) { printf("*** GLIB header files (version %d.%d.%d) do not match\n", GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION); printf("*** library (version %d.%d.%d)\n", glib_major_version, glib_minor_version, glib_micro_version); } else { if ((glib_major_version > major) || ((glib_major_version == major) && (glib_minor_version > minor)) || ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro))) { return 0; } else { printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n", glib_major_version, glib_minor_version, glib_micro_version); printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n", major, minor, micro); printf("*** GLIB is always available from ftp://ftp.gtk.org.\n"); printf("***\n"); printf("*** If you have already installed a sufficiently new version, this error\n"); printf("*** probably means that the wrong copy of the pkg-config shell script is\n"); printf("*** being found. The easiest way to fix this is to remove the old version\n"); printf("*** of GLIB, but you can also set the PKG_CONFIG environment to point to the\n"); printf("*** correct copy of pkg-config. (In this case, you will have to\n"); printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); printf("*** so that the correct libraries are found at run-time))\n"); } } return 1; } ],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi if test "x$no_glib" = x ; then AC_MSG_RESULT(yes (version $glib_config_major_version.$glib_config_minor_version.$glib_config_micro_version)) ifelse([$2], , :, [$2]) else AC_MSG_RESULT(no) if test "$PKG_CONFIG" = "no" ; then echo "*** A new enough version of pkg-config was not found." echo "*** See http://www.freedesktop.org/software/pkgconfig/" else if test -f conf.glibtest ; then : else echo "*** Could not run GLIB test program, checking why..." ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $GLIB_CFLAGS" LIBS="$LIBS $GLIB_LIBS" AC_TRY_LINK([ #include #include ], [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ], [ echo "*** The test program compiled, but did not run. This usually means" echo "*** that the run-time linker is not finding GLIB or finding the wrong" echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your" echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" echo "*** to the installed location Also, make sure you have run ldconfig if that" echo "*** is required on your system" echo "***" echo "*** If you have an old version installed, it is best to remove it, although" echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ], [ echo "*** The test program failed to compile or link. See the file config.log for the" echo "*** exact error that occured. This usually means GLIB is incorrectly installed."]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi GLIB_CFLAGS="" GLIB_LIBS="" GLIB_GENMARSHAL="" GOBJECT_QUERY="" GLIB_MKENUMS="" ifelse([$3], , :, [$3]) fi AC_SUBST(GLIB_CFLAGS) AC_SUBST(GLIB_LIBS) AC_SUBST(GLIB_GENMARSHAL) AC_SUBST(GOBJECT_QUERY) AC_SUBST(GLIB_MKENUMS) rm -f conf.glibtest ]) # Configure paths for LIBART # Raph Levien 98-11-18 # stolen from Manish Singh 98-9-30 # stolen back from Frank Belew # stolen from Manish Singh # Shamelessly stolen from Owen Taylor dnl AM_PATH_LIBART([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]]) dnl Test for LIBART, and define LIBART_CFLAGS and LIBART_LIBS dnl AC_DEFUN(AM_PATH_LIBART, [dnl dnl Get the cflags and libraries from the libart-config script dnl AC_ARG_WITH(libart-prefix,[ --with-libart-prefix=PFX Prefix where LIBART is installed (optional)], libart_prefix="$withval", libart_prefix="") AC_ARG_WITH(libart-exec-prefix,[ --with-libart-exec-prefix=PFX Exec prefix where LIBART is installed (optional)], libart_exec_prefix="$withval", libart_exec_prefix="") AC_ARG_ENABLE(libarttest, [ --disable-libarttest Do not try to compile and run a test LIBART program], , enable_libarttest=yes) if test x$libart_exec_prefix != x ; then libart_args="$libart_args --exec-prefix=$libart_exec_prefix" if test x${LIBART_CONFIG+set} != xset ; then LIBART_CONFIG=$libart_exec_prefix/bin/libart-config fi fi if test x$libart_prefix != x ; then libart_args="$libart_args --prefix=$libart_prefix" if test x${LIBART_CONFIG+set} != xset ; then LIBART_CONFIG=$libart_prefix/bin/libart-config fi fi AC_PATH_PROG(LIBART_CONFIG, libart2-config, no) if test "$LIBART_CONFIG" = "no" ; then AC_PATH_PROG(LIBART_CONFIG, libart-config, no) fi min_libart_version=ifelse([$1], ,0.2.5,$1) AC_MSG_CHECKING(for LIBART - version >= $min_libart_version) no_libart="" if test "$LIBART_CONFIG" = "no" ; then no_libart=yes else LIBART_CFLAGS=`$LIBART_CONFIG $libartconf_args --cflags` LIBART_LIBS=`$LIBART_CONFIG $libartconf_args --libs` libart_major_version=`$LIBART_CONFIG $libart_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` libart_minor_version=`$LIBART_CONFIG $libart_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` libart_micro_version=`$LIBART_CONFIG $libart_config_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` if test "x$enable_libarttest" = "xyes" ; then ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $LIBART_CFLAGS" LIBS="$LIBS $LIBART_LIBS" dnl dnl Now check if the installed LIBART is sufficiently new. (Also sanity dnl checks the results of libart-config to some extent dnl rm -f conf.libarttest AC_TRY_RUN([ #include #include #include #include char* my_strdup (char *str) { char *new_str; if (str) { new_str = malloc ((strlen (str) + 1) * sizeof(char)); strcpy (new_str, str); } else new_str = NULL; return new_str; } int main () { int major, minor, micro; char *tmp_version; system ("touch conf.libarttest"); /* HP/UX 9 (%@#!) writes to sscanf strings */ tmp_version = my_strdup("$min_libart_version"); if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { printf("%s, bad version string\n", "$min_libart_version"); exit(1); } if (($libart_major_version > major) || (($libart_major_version == major) && ($libart_minor_version > minor)) || (($libart_major_version == major) && ($libart_minor_version == minor) && ($libart_micro_version >= micro))) { return 0; } else { printf("\n*** 'libart-config --version' returned %d.%d.%d, but the minimum version\n", $libart_major_version, $libart_minor_version, $libart_micro_version); printf("*** of LIBART required is %d.%d.%d. If libart-config is correct, then it is\n", major, minor, micro); printf("*** best to upgrade to the required version.\n"); printf("*** If libart-config was wrong, set the environment variable LIBART_CONFIG\n"); printf("*** to point to the correct copy of libart-config, and remove the file\n"); printf("*** config.cache before re-running configure\n"); return 1; } } ],, no_libart=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi if test "x$no_libart" = x ; then AC_MSG_RESULT(yes) ifelse([$2], , :, [$2]) else AC_MSG_RESULT(no) if test "$LIBART_CONFIG" = "no" ; then echo "*** The libart-config script installed by LIBART could not be found" echo "*** If LIBART was installed in PREFIX, make sure PREFIX/bin is in" echo "*** your path, or set the LIBART_CONFIG environment variable to the" echo "*** full path to libart-config." else if test -f conf.libarttest ; then : else echo "*** Could not run LIBART test program, checking why..." CFLAGS="$CFLAGS $LIBART_CFLAGS" LIBS="$LIBS $LIBART_LIBS" AC_TRY_LINK([ #include #include ], [ return 0; ], [ echo "*** The test program compiled, but did not run. This usually means" echo "*** that the run-time linker is not finding LIBART or finding the wrong" echo "*** version of LIBART. If it is not finding LIBART, you'll need to set your" echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" echo "*** to the installed location Also, make sure you have run ldconfig if that" echo "*** is required on your system" echo "***" echo "*** If you have an old version installed, it is best to remove it, although" echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"], [ echo "*** The test program failed to compile or link. See the file config.log for the" echo "*** exact error that occured. This usually means LIBART was incorrectly installed" echo "*** or that you have moved LIBART since it was installed. In the latter case, you" echo "*** may want to edit the libart-config script: $LIBART_CONFIG" ]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi LIBART_CFLAGS="" LIBART_LIBS="" ifelse([$3], , :, [$3]) fi AC_SUBST(LIBART_CFLAGS) AC_SUBST(LIBART_LIBS) rm -f conf.libarttest ])