# Makefile.in generated by automake 1.9.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = . am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ target_triplet = @target@ DIST_COMMON = $(am__configure_deps) $(srcdir)/../config.guess \ $(srcdir)/../config.sub $(srcdir)/../depcomp \ $(srcdir)/../install-sh $(srcdir)/../ltmain.sh \ $(srcdir)/../missing $(srcdir)/../mkinstalldirs \ $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ $(srcdir)/config.h.in $(srcdir)/libgomp.spec.in \ $(srcdir)/libgomp_f.h.in $(srcdir)/omp.h.in \ $(srcdir)/omp_lib.f90.in $(srcdir)/omp_lib.h.in \ $(top_srcdir)/configure ChangeLog subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/../config/depstand.m4 \ $(top_srcdir)/../config/enable.m4 \ $(top_srcdir)/../config/lead-dot.m4 \ $(top_srcdir)/../config/multi.m4 \ $(top_srcdir)/../config/stdint.m4 \ $(top_srcdir)/../config/tls.m4 $(top_srcdir)/acinclude.m4 \ $(top_srcdir)/../libtool.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno configure.status.lineno mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = omp.h omp_lib.h omp_lib.f90 libgomp_f.h \ libgomp.spec am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; am__installdirs = "$(DESTDIR)$(toolexeclibdir)" "$(DESTDIR)$(infodir)" \ "$(DESTDIR)$(fincludedir)" "$(DESTDIR)$(libsubincludedir)" \ "$(DESTDIR)$(toolexeclibdir)" toolexeclibLTLIBRARIES_INSTALL = $(INSTALL) LTLIBRARIES = $(toolexeclib_LTLIBRARIES) libgomp_la_LIBADD = am_libgomp_la_OBJECTS = alloc.lo barrier.lo critical.lo env.lo \ error.lo iter.lo loop.lo ordered.lo parallel.lo sections.lo \ single.lo team.lo work.lo lock.lo mutex.lo proc.lo sem.lo \ bar.lo time.lo fortran.lo libgomp_la_OBJECTS = $(am_libgomp_la_OBJECTS) DEFAULT_INCLUDES = -I. -I$(srcdir) -I. depcomp = $(SHELL) $(top_srcdir)/../depcomp am__depfiles_maybe = depfiles COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ SOURCES = $(libgomp_la_SOURCES) DIST_SOURCES = $(libgomp_la_SOURCES) MULTISRCTOP = MULTIBUILDTOP = MULTIDIRS = MULTISUBDIR = MULTIDO = true MULTICLEAN = true INFO_DEPS = libgomp.info am__TEXINFO_TEX_DIR = $(srcdir)/../gcc/doc/include DVIS = libgomp.dvi PDFS = libgomp.pdf PSS = libgomp.ps HTMLS = libgomp.html TEXINFOS = libgomp.texi TEXI2DVI = texi2dvi TEXI2PDF = $(TEXI2DVI) --pdf --batch MAKEINFOHTML = $(MAKEINFO) --html AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS) DVIPS = dvips RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-exec-recursive install-info-recursive \ install-recursive installcheck-recursive installdirs-recursive \ pdf-recursive ps-recursive uninstall-info-recursive \ uninstall-recursive nodist_fincludeHEADERS_INSTALL = $(INSTALL_HEADER) nodist_libsubincludeHEADERS_INSTALL = $(INSTALL_HEADER) nodist_toolexeclibHEADERS_INSTALL = $(INSTALL_HEADER) HEADERS = $(nodist_finclude_HEADERS) $(nodist_libsubinclude_HEADERS) \ $(nodist_noinst_HEADERS) $(nodist_toolexeclib_HEADERS) ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ { test ! -d $(distdir) \ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -fr $(distdir); }; } DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best distuninstallcheck_listfiles = find . -type f -print distcleancheck_listfiles = find . -type f -print VPATH = $(subst $(space),:,$(strip $(search_path))) ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FC = @FC@ FCFLAGS = @FCFLAGS@ GENINSRC_FALSE = @GENINSRC_FALSE@ GENINSRC_TRUE = @GENINSRC_TRUE@ GREP = @GREP@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBGOMP_BUILD_VERSIONED_SHLIB_FALSE = @LIBGOMP_BUILD_VERSIONED_SHLIB_FALSE@ LIBGOMP_BUILD_VERSIONED_SHLIB_TRUE = @LIBGOMP_BUILD_VERSIONED_SHLIB_TRUE@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ MAKEINFO = @MAKEINFO@ OBJEXT = @OBJEXT@ OMP_LOCK_ALIGN = @OMP_LOCK_ALIGN@ OMP_LOCK_KIND = @OMP_LOCK_KIND@ OMP_LOCK_SIZE = @OMP_LOCK_SIZE@ OMP_NEST_LOCK_ALIGN = @OMP_NEST_LOCK_ALIGN@ OMP_NEST_LOCK_KIND = @OMP_NEST_LOCK_KIND@ OMP_NEST_LOCK_SIZE = @OMP_NEST_LOCK_SIZE@ OPT_LDFLAGS = @OPT_LDFLAGS@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ RANLIB = @RANLIB@ SECTION_LDFLAGS = @SECTION_LDFLAGS@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_FORTRAN_FALSE = @USE_FORTRAN_FALSE@ USE_FORTRAN_TRUE = @USE_FORTRAN_TRUE@ VERSION = @VERSION@ XCFLAGS = @XCFLAGS@ XLDFLAGS = @XLDFLAGS@ ac_ct_CC = @ac_ct_CC@ ac_ct_FC = @ac_ct_FC@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ config_path = @config_path@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ enable_shared = @enable_shared@ enable_static = @enable_static@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ libtool_VERSION = @libtool_VERSION@ link_gomp = @link_gomp@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ multi_basedir = @multi_basedir@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target = @target@ target_alias = @target_alias@ target_cpu = @target_cpu@ target_os = @target_os@ target_vendor = @target_vendor@ toolexecdir = @toolexecdir@ toolexeclibdir = @toolexeclibdir@ ACLOCAL_AMFLAGS = -I ../config SUBDIRS = testsuite gcc_version := $(shell cat $(top_srcdir)/../gcc/BASE-VER) search_path = $(addprefix $(top_srcdir)/config/, $(config_path)) $(top_srcdir) fincludedir = $(libdir)/gcc/$(target_alias)/$(gcc_version)/finclude libsubincludedir = $(libdir)/gcc/$(target_alias)/$(gcc_version)/include empty = space = $(empty) $(empty) AM_CPPFLAGS = $(addprefix -I, $(search_path)) AM_CFLAGS = $(XCFLAGS) AM_LDFLAGS = $(XLDFLAGS) $(SECTION_LDFLAGS) $(OPT_LDFLAGS) toolexeclib_LTLIBRARIES = libgomp.la nodist_toolexeclib_HEADERS = libgomp.spec @LIBGOMP_BUILD_VERSIONED_SHLIB_FALSE@libgomp_version_script = @LIBGOMP_BUILD_VERSIONED_SHLIB_TRUE@libgomp_version_script = -Wl,--version-script,$(top_srcdir)/libgomp.map libgomp_version_info = -version-info $(libtool_VERSION) libgomp_la_LDFLAGS = $(libgomp_version_info) $(libgomp_version_script) libgomp_la_SOURCES = alloc.c barrier.c critical.c env.c error.c iter.c \ loop.c ordered.c parallel.c sections.c single.c team.c work.c \ lock.c mutex.c proc.c sem.c bar.c time.c fortran.c nodist_noinst_HEADERS = libgomp_f.h nodist_libsubinclude_HEADERS = omp.h @USE_FORTRAN_TRUE@nodist_finclude_HEADERS = omp_lib.h omp_lib.f90 omp_lib.mod omp_lib_kinds.mod # Automake Documentation: # If your package has Texinfo files in many directories, you can use the # variable TEXINFO_TEX to tell Automake where to find the canonical # `texinfo.tex' for your package. The value of this variable should be # the relative path from the current `Makefile.am' to `texinfo.tex'. TEXINFO_TEX = ../gcc/doc/include/texinfo.tex # Defines info, dvi, pdf and html targets MAKEINFOFLAGS = -I $(srcdir)/../gcc/doc/include info_TEXINFOS = libgomp.texi @GENINSRC_FALSE@STAMP_GENINSRC = # AM_CONDITIONAL on configure option --generated-files-in-srcdir @GENINSRC_TRUE@STAMP_GENINSRC = stamp-geninsrc CLEANFILES = stamp-geninsrc libgomp.info MAINTAINERCLEANFILES = $(srcdir)/libgomp.info all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: .SUFFIXES: .c .dvi .lo .o .obj .ps am--refresh: @: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \ cd $(srcdir) && $(AUTOMAKE) --foreign \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --foreign Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) config.h: stamp-h1 @if test ! -f $@; then \ rm -f stamp-h1; \ $(MAKE) stamp-h1; \ else :; fi stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_srcdir) && $(AUTOHEADER) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 omp.h: $(top_builddir)/config.status $(srcdir)/omp.h.in cd $(top_builddir) && $(SHELL) ./config.status $@ omp_lib.h: $(top_builddir)/config.status $(srcdir)/omp_lib.h.in cd $(top_builddir) && $(SHELL) ./config.status $@ omp_lib.f90: $(top_builddir)/config.status $(srcdir)/omp_lib.f90.in cd $(top_builddir) && $(SHELL) ./config.status $@ libgomp_f.h: $(top_builddir)/config.status $(srcdir)/libgomp_f.h.in cd $(top_builddir) && $(SHELL) ./config.status $@ libgomp.spec: $(top_builddir)/config.status $(srcdir)/libgomp.spec.in cd $(top_builddir) && $(SHELL) ./config.status $@ install-toolexeclibLTLIBRARIES: $(toolexeclib_LTLIBRARIES) @$(NORMAL_INSTALL) test -z "$(toolexeclibdir)" || $(mkdir_p) "$(DESTDIR)$(toolexeclibdir)" @list='$(toolexeclib_LTLIBRARIES)'; for p in $$list; do \ if test -f $$p; then \ f=$(am__strip_dir) \ echo " $(LIBTOOL) --mode=install $(toolexeclibLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(toolexeclibdir)/$$f'"; \ $(LIBTOOL) --mode=install $(toolexeclibLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(toolexeclibdir)/$$f"; \ else :; fi; \ done uninstall-toolexeclibLTLIBRARIES: @$(NORMAL_UNINSTALL) @set -x; list='$(toolexeclib_LTLIBRARIES)'; for p in $$list; do \ p=$(am__strip_dir) \ echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(toolexeclibdir)/$$p'"; \ $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(toolexeclibdir)/$$p"; \ done clean-toolexeclibLTLIBRARIES: -test -z "$(toolexeclib_LTLIBRARIES)" || rm -f $(toolexeclib_LTLIBRARIES) @list='$(toolexeclib_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done libgomp.la: $(libgomp_la_OBJECTS) $(libgomp_la_DEPENDENCIES) $(LINK) -rpath $(toolexeclibdir) $(libgomp_la_LDFLAGS) $(libgomp_la_OBJECTS) $(libgomp_la_LIBADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alloc.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bar.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/barrier.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/critical.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/env.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/error.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fortran.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iter.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lock.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/loop.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mutex.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ordered.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/parallel.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/proc.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sections.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sem.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/single.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/team.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/time.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/work.Plo@am__quote@ .c.o: @am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool # GNU Make needs to see an explicit $(MAKE) variable in the command it # runs to enable its job server during parallel builds. Hence the # comments below. all-multi: $(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do # $(MAKE) install-multi: $(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do # $(MAKE) mostlyclean-multi: $(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean # $(MAKE) clean-multi: $(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean # $(MAKE) distclean-multi: $(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean # $(MAKE) maintainer-clean-multi: $(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean # $(MAKE) libgomp.info: libgomp.texi restore=: && backupdir="$(am__leading_dot)am$$$$" && \ rm -rf $$backupdir && mkdir $$backupdir && \ if ($(MAKEINFO) --version) >/dev/null 2>&1; then \ for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \ if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \ done; \ else :; fi && \ if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ -o $@ `test -f 'libgomp.texi' || echo '$(srcdir)/'`libgomp.texi; \ then \ rc=0; \ else \ rc=$$?; \ $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \ fi; \ rm -rf $$backupdir; exit $$rc libgomp.dvi: libgomp.texi TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ $(TEXI2DVI) -o $@ `test -f 'libgomp.texi' || echo '$(srcdir)/'`libgomp.texi libgomp.pdf: libgomp.texi TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ $(TEXI2PDF) -o $@ `test -f 'libgomp.texi' || echo '$(srcdir)/'`libgomp.texi libgomp.html: libgomp.texi rm -rf $(@:.html=.htp) if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ -o $(@:.html=.htp) `test -f 'libgomp.texi' || echo '$(srcdir)/'`libgomp.texi; \ then \ rm -rf $@; \ if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \ else \ if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \ exit 1; \ fi .dvi.ps: TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ $(DVIPS) -o $@ $< uninstall-info-am: @$(PRE_UNINSTALL) @if (install-info --version && \ install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \ list='$(INFO_DEPS)'; \ for file in $$list; do \ relfile=`echo "$$file" | sed 's|^.*/||'`; \ echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \ install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \ done; \ else :; fi @$(NORMAL_UNINSTALL) @list='$(INFO_DEPS)'; \ for file in $$list; do \ relfile=`echo "$$file" | sed 's|^.*/||'`; \ relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \ (if cd "$(DESTDIR)$(infodir)"; then \ echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \ rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \ else :; fi); \ done dist-info: $(INFO_DEPS) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ list='$(INFO_DEPS)'; \ for base in $$list; do \ case $$base in \ $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \ esac; \ if test -f $$base; then d=.; else d=$(srcdir); fi; \ for file in $$d/$$base*; do \ relfile=`expr "$$file" : "$$d/\(.*\)"`; \ test -f $(distdir)/$$relfile || \ cp -p $$file $(distdir)/$$relfile; \ done; \ done mostlyclean-aminfo: -rm -rf libgomp.aux libgomp.cp libgomp.cps libgomp.fn libgomp.fns libgomp.ky \ libgomp.kys libgomp.log libgomp.pg libgomp.pgs libgomp.tmp \ libgomp.toc libgomp.tp libgomp.tps libgomp.vr libgomp.vrs \ libgomp.dvi libgomp.pdf libgomp.ps libgomp.html maintainer-clean-aminfo: @list='$(INFO_DEPS)'; for i in $$list; do \ i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \ echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \ rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \ done install-nodist_fincludeHEADERS: $(nodist_finclude_HEADERS) @$(NORMAL_INSTALL) test -z "$(fincludedir)" || $(mkdir_p) "$(DESTDIR)$(fincludedir)" @list='$(nodist_finclude_HEADERS)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f=$(am__strip_dir) \ echo " $(nodist_fincludeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(fincludedir)/$$f'"; \ $(nodist_fincludeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(fincludedir)/$$f"; \ done uninstall-nodist_fincludeHEADERS: @$(NORMAL_UNINSTALL) @list='$(nodist_finclude_HEADERS)'; for p in $$list; do \ f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(fincludedir)/$$f'"; \ rm -f "$(DESTDIR)$(fincludedir)/$$f"; \ done install-nodist_libsubincludeHEADERS: $(nodist_libsubinclude_HEADERS) @$(NORMAL_INSTALL) test -z "$(libsubincludedir)" || $(mkdir_p) "$(DESTDIR)$(libsubincludedir)" @list='$(nodist_libsubinclude_HEADERS)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f=$(am__strip_dir) \ echo " $(nodist_libsubincludeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(libsubincludedir)/$$f'"; \ $(nodist_libsubincludeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(libsubincludedir)/$$f"; \ done uninstall-nodist_libsubincludeHEADERS: @$(NORMAL_UNINSTALL) @list='$(nodist_libsubinclude_HEADERS)'; for p in $$list; do \ f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(libsubincludedir)/$$f'"; \ rm -f "$(DESTDIR)$(libsubincludedir)/$$f"; \ done install-nodist_toolexeclibHEADERS: $(nodist_toolexeclib_HEADERS) @$(NORMAL_INSTALL) test -z "$(toolexeclibdir)" || $(mkdir_p) "$(DESTDIR)$(toolexeclibdir)" @list='$(nodist_toolexeclib_HEADERS)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f=$(am__strip_dir) \ echo " $(nodist_toolexeclibHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(toolexeclibdir)/$$f'"; \ $(nodist_toolexeclibHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(toolexeclibdir)/$$f"; \ done uninstall-nodist_toolexeclibHEADERS: @$(NORMAL_UNINSTALL) @list='$(nodist_toolexeclib_HEADERS)'; for p in $$list; do \ f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(toolexeclibdir)/$$f'"; \ rm -f "$(DESTDIR)$(toolexeclibdir)/$$f"; \ done # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(am__remove_distdir) mkdir $(distdir) $(mkdir_p) $(distdir)/. $(distdir)/.. $(distdir)/../config @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(mkdir_p) "$(distdir)/$$subdir" \ || exit 1; \ distdir=`$(am__cd) $(distdir) && pwd`; \ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$top_distdir" \ distdir="$$distdir/$$subdir" \ distdir) \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-info -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r $(distdir) dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__remove_distdir) dist dist-all: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir); chmod a+w $(distdir) mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && cd $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck $(am__remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' distuninstallcheck: @cd $(distuninstallcheck_dir) \ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile $(INFO_DEPS) $(LTLIBRARIES) all-multi $(HEADERS) \ config.h all-local installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(toolexeclibdir)" "$(DESTDIR)$(infodir)" "$(DESTDIR)$(fincludedir)" "$(DESTDIR)$(libsubincludedir)" "$(DESTDIR)$(toolexeclibdir)"; do \ test -z "$$dir" || $(mkdir_p) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) clean: clean-multi clean-recursive clean-am: clean-generic clean-libtool clean-toolexeclibLTLIBRARIES \ mostlyclean-am distclean: distclean-multi distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-hdr distclean-libtool distclean-tags dvi: dvi-recursive dvi-am: $(DVIS) html: html-recursive html-am: $(HTMLS) info: info-recursive info-am: $(INFO_DEPS) install-data-am: install-info-am install-nodist_fincludeHEADERS \ install-nodist_libsubincludeHEADERS install-exec-am: install-multi install-nodist_toolexeclibHEADERS \ install-toolexeclibLTLIBRARIES install-info: install-info-recursive install-info-am: $(INFO_DEPS) @$(NORMAL_INSTALL) test -z "$(infodir)" || $(mkdir_p) "$(DESTDIR)$(infodir)" @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ list='$(INFO_DEPS)'; \ for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ esac; \ if test -f $$file; then d=.; else d=$(srcdir); fi; \ file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \ for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \ $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \ if test -f $$ifile; then \ relfile=`echo "$$ifile" | sed 's|^.*/||'`; \ echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \ $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \ else : ; fi; \ done; \ done @$(POST_INSTALL) @if (install-info --version && \ install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \ list='$(INFO_DEPS)'; \ for file in $$list; do \ relfile=`echo "$$file" | sed 's|^.*/||'`; \ echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\ install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\ done; \ else : ; fi install-man: installcheck-am: maintainer-clean: maintainer-clean-multi maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-aminfo \ maintainer-clean-generic mostlyclean: mostlyclean-multi mostlyclean-recursive mostlyclean-am: mostlyclean-aminfo mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: $(PDFS) ps: ps-recursive ps-am: $(PSS) uninstall-am: uninstall-info-am uninstall-nodist_fincludeHEADERS \ uninstall-nodist_libsubincludeHEADERS \ uninstall-nodist_toolexeclibHEADERS \ uninstall-toolexeclibLTLIBRARIES uninstall-info: uninstall-info-recursive .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am all-local \ all-multi am--refresh check check-am clean clean-generic \ clean-libtool clean-multi clean-recursive \ clean-toolexeclibLTLIBRARIES ctags ctags-recursive dist \ dist-all dist-bzip2 dist-gzip dist-info dist-shar dist-tarZ \ dist-zip distcheck distclean distclean-compile \ distclean-generic distclean-hdr distclean-libtool \ distclean-multi distclean-recursive distclean-tags \ distcleancheck distdir distuninstallcheck dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-exec install-exec-am install-info \ install-info-am install-man install-multi \ install-nodist_fincludeHEADERS \ install-nodist_libsubincludeHEADERS \ install-nodist_toolexeclibHEADERS install-strip \ install-toolexeclibLTLIBRARIES installcheck installcheck-am \ installdirs installdirs-am maintainer-clean \ maintainer-clean-aminfo maintainer-clean-generic \ maintainer-clean-multi maintainer-clean-recursive mostlyclean \ mostlyclean-aminfo mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool mostlyclean-multi mostlyclean-recursive \ pdf pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \ uninstall-info-am uninstall-nodist_fincludeHEADERS \ uninstall-nodist_libsubincludeHEADERS \ uninstall-nodist_toolexeclibHEADERS \ uninstall-toolexeclibLTLIBRARIES omp_lib_kinds.mod: omp_lib.mod : omp_lib.mod: omp_lib.f90 $(FC) $(FCFLAGS) -fsyntax-only omp_lib.f90 fortran.lo: libgomp_f.h fortran.o: libgomp_f.h env.lo: libgomp_f.h env.o: libgomp_f.h # No install-html target .PHONY: install-html install-html: all-local: $(STAMP_GENINSRC) stamp-geninsrc: libgomp.info -cp -p $(top_builddir)/libgomp.info $(srcdir)/libgomp.info touch $@ # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: