------------------------------------------------------------------------------ -- -- -- GNAT RUN-TIME COMPONENTS -- -- -- -- A D A . C A L E N D A R -- -- -- -- B o d y -- -- -- -- Copyright (C) 1992-2007, Free Software Foundation, Inc. -- -- -- -- GNAT is free software; you can redistribute it and/or modify it under -- -- terms of the GNU General Public License as published by the Free Soft- -- -- ware Foundation; either version 2, or (at your option) any later ver- -- -- sion. GNAT is distributed in the hope that it will be useful, but WITH- -- -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -- -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -- -- for more details. You should have received a copy of the GNU General -- -- Public License distributed with GNAT; see file COPYING. If not, write -- -- to the Free Software Foundation, 51 Franklin Street, Fifth Floor, -- -- Boston, MA 02110-1301, USA. -- -- -- -- As a special exception, if other files instantiate generics from this -- -- unit, or you link this unit with other files to produce an executable, -- -- this unit does not by itself cause the resulting executable to be -- -- covered by the GNU General Public License. This exception does not -- -- however invalidate any other reasons why the executable file might be -- -- covered by the GNU Public License. -- -- -- -- GNAT was originally developed by the GNAT team at New York University. -- -- Extensive contributions were provided by Ada Core Technologies Inc. -- -- -- ------------------------------------------------------------------------------ -- This is the Alpha/VMS version with System.Aux_DEC; use System.Aux_DEC; with Ada.Unchecked_Conversion; package body Ada.Calendar is -------------------------- -- Implementation Notes -- -------------------------- -- Variables of type Ada.Calendar.Time have suffix _S or _M to denote -- units of seconds or milis. -- Because time is measured in different units and from different origins -- on various targets, a system independent model is incorporated into -- Ada.Calendar. The idea behing the design is to encapsulate all target -- dependent machinery in a single package, thus providing a uniform -- interface to all existing and any potential children. -- package Ada.Calendar -- procedure Split (5 parameters) -------+ -- | Call from local routine -- private | -- package Formatting_Operations | -- procedure Split (11 parameters) <--+ -- end Formatting_Operations | -- end Ada.Calendar | -- | -- package Ada.Calendar.Formatting | Call from child routine -- procedure Split (9 or 10 parameters) -+ -- end Ada.Calendar.Formatting -- The behaviour of the interfacing routines is controlled via various -- flags. All new Ada 2005 types from children of Ada.Calendar are -- emulated by a similar type. For instance, type Day_Number is replaced -- by Integer in various routines. One ramification of this model is that -- the caller site must perform validity checks on returned results. -- The end result of this model is the lack of target specific files per -- child of Ada.Calendar (a-calfor, a-calfor-vms, a-calfor-vxwors, etc). ----------------------- -- Local Subprograms -- ----------------------- procedure Check_Within_Time_Bounds (T : Time); -- Ensure that a time representation value falls withing the bounds of Ada -- time. Leap seconds support is taken into account. procedure Cumulative_Leap_Seconds (Start_Date : Time; End_Date : Time; Elapsed_Leaps : out Natural; Next_Leap_Sec : out Time); -- Elapsed_Leaps is the sum of the leap seconds that have occured on or -- after Start_Date and before (strictly before) End_Date. Next_Leap_Sec -- represents the next leap second occurence on or after End_Date. If -- there are no leaps seconds after End_Date, End_Of_Time is returned. -- End_Of_Time can be used as End_Date to count all the leap seconds that -- have occured on or after Start_Date. -- -- Note: Any sub seconds of Start_Date and End_Date are discarded before -- the calculations are done. For instance: if 113 seconds is a leap -- second (it isn't) and 113.5 is input as an End_Date, the leap second -- at 113 will not be counted in Leaps_Between, but it will be returned -- as Next_Leap_Sec. Thus, if the caller wants to know if the End_Date is -- a leap second, the comparison should be: -- -- End_Date >= Next_Leap_Sec; -- -- After_Last_Leap is designed so that this comparison works without -- having to first check if Next_Leap_Sec is a valid leap second. function To_Duration (T : Time) return Duration; function To_Relative_Time (D : Duration) return Time; -- It is important to note that duration's fractional part denotes nano -- seconds while the units of Time are 100 nanoseconds. If a regular -- Unchecked_Conversion was employed, the resulting values would be off -- by 100. --------------------- -- Local Constants -- --------------------- -- Currently none of the GNAT targets support leap seconds. At some point -- it might be necessary to query a C function to determine if the target -- supports leap seconds, but for now this is deemed unnecessary. Leap_Support : constant Boolean := False; Leap_Seconds_Count : constant Natural := 23; -- The range of Ada time expressed as milis since the VMS Epoch Ada_Low : constant Time := (10 * 366 + 32 * 365 + 45) * Milis_In_Day; Ada_High : constant Time := (131 * 366 + 410 * 365 + 45) * Milis_In_Day; -- Even though the upper bound of time is 2399-12-31 23:59:59.9999999 -- UTC, it must be increased to include all leap seconds. Ada_High_And_Leaps : constant Time := Ada_High + Time (Leap_Seconds_Count) * Mili; -- Two constants used in the calculations of elapsed leap seconds. -- End_Of_Time is later than Ada_High in time zone -28. Start_Of_Time -- is earlier than Ada_Low in time zone +28. End_Of_Time : constant Time := Ada_High + Time (3) * Milis_In_Day; Start_Of_Time : constant Time := Ada_Low - Time (3) * Milis_In_Day; Cumulative_Days_Before_Month : constant array (Month_Number) of Natural := (0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334); Leap_Second_Times : array (1 .. Leap_Seconds_Count) of Time; -- Each value represents a time value which is one second before a leap -- second occurence. This table is populated during the elaboration of -- Ada.Calendar. --------- -- "+" -- --------- function "+" (Left : Time; Right : Duration) return Time is pragma Unsuppress (Overflow_Check); Res_M : Time; begin -- Trivial case if Right = Duration (0.0) then return Left; end if; Res_M := Left + To_Relative_Time (Right); Check_Within_Time_Bounds (Res_M); return Res_M; exception when Constraint_Error => raise Time_Error; end "+"; function "+" (Left : Duration; Right : Time) return Time is pragma Unsuppress (Overflow_Check); begin return Right + Left; exception when Constraint_Error => raise Time_Error; end "+"; --------- -- "-" -- --------- function "-" (Left : Time; Right : Duration) return Time is pragma Unsuppress (Overflow_Check); Res_M : Time; begin -- Trivial case if Right = Duration (0.0) then return Left; end if; Res_M := Left - To_Relative_Time (Right); Check_Within_Time_Bounds (Res_M); return Res_M; exception when Constraint_Error => raise Time_Error; end "-"; function "-" (Left : Time; Right : Time) return Duration is pragma Unsuppress (Overflow_Check); -- The bound of type Duration expressed as time Dur_High : constant Time := To_Relative_Time (Duration'Last); Dur_Low : constant Time := To_Relative_Time (Duration'First); Res_M : Time; begin Res_M := Left - Right; -- The result does not fit in a duration value if Res_M < Dur_Low or else Res_M >= Dur_High then raise Time_Error; end if; return To_Duration (Res_M); exception when Constraint_Error => raise Time_Error; end "-"; --------- -- "<" -- --------- function "<" (Left, Right : Time) return Boolean is begin return Long_Integer (Left) < Long_Integer (Right); end "<"; ---------- -- "<=" -- ---------- function "<=" (Left, Right : Time) return Boolean is begin return Long_Integer (Left) <= Long_Integer (Right); end "<="; --------- -- ">" -- --------- function ">" (Left, Right : Time) return Boolean is begin return Long_Integer (Left) > Long_Integer (Right); end ">"; ---------- -- ">=" -- ---------- function ">=" (Left, Right : Time) return Boolean is begin return Long_Integer (Left) >= Long_Integer (Right); end ">="; ------------------------------ -- Check_Within_Time_Bounds -- ------------------------------ procedure Check_Within_Time_Bounds (T : Time) is begin if Leap_Support then if T < Ada_Low or else T > Ada_High_And_Leaps then raise Time_Error; end if; else if T < Ada_Low or else T > Ada_High then raise Time_Error; end if; end if; end Check_Within_Time_Bounds; ----------- -- Clock -- ----------- function Clock return Time is Elapsed_Leaps : Natural; Next_Leap_M : Time; Res_M : constant Time := Time (OSP.OS_Clock); begin -- Note that on other targets a soft-link is used to get a different -- clock depending whether tasking is used or not. On VMS this isn't -- needed since all clock calls end up using SYS$GETTIM, so call the -- OS_Primitives version for efficiency. -- If the target supports leap seconds, determine the number of leap -- seconds elapsed until this moment. if Leap_Support then Cumulative_Leap_Seconds (Start_Of_Time, Res_M, Elapsed_Leaps, Next_Leap_M); -- The system clock may fall exactly on a leap second if Res_M >= Next_Leap_M then Elapsed_Leaps := Elapsed_Leaps + 1; end if; -- The target does not support leap seconds else Elapsed_Leaps := 0; end if; return Res_M + Time (Elapsed_Leaps) * Mili; end Clock; ----------------------------- -- Cumulative_Leap_Seconds -- ----------------------------- procedure Cumulative_Leap_Seconds (Start_Date : Time; End_Date : Time; Elapsed_Leaps : out Natural; Next_Leap_Sec : out Time) is End_Index : Positive; End_T : Time := End_Date; Start_Index : Positive; Start_T : Time := Start_Date; begin pragma Assert (Leap_Support and then End_Date >= Start_Date); Next_Leap_Sec := End_Of_Time; -- Make sure that the end date does not excede the upper bound -- of Ada time. if End_Date > Ada_High then End_T := Ada_High; end if; -- Remove the sub seconds from both dates Start_T := Start_T - (Start_T mod Mili); End_T := End_T - (End_T mod Mili); -- Some trivial cases: -- Leap 1 . . . Leap N -- ---+========+------+############+-------+========+----- -- Start_T End_T Start_T End_T if End_T < Leap_Second_Times (1) then Elapsed_Leaps := 0; Next_Leap_Sec := Leap_Second_Times (1); return; elsif Start_T > Leap_Second_Times (Leap_Seconds_Count) then Elapsed_Leaps := 0; Next_Leap_Sec := End_Of_Time; return; end if; -- Perform the calculations only if the start date is within the leap -- second occurences table. if Start_T <= Leap_Second_Times (Leap_Seconds_Count) then -- 1 2 N - 1 N -- +----+----+-- . . . --+-------+---+ -- | T1 | T2 | | N - 1 | N | -- +----+----+-- . . . --+-------+---+ -- ^ ^ -- | Start_Index | End_Index -- +-------------------+ -- Leaps_Between -- The idea behind the algorithm is to iterate and find two closest -- dates which are after Start_T and End_T. Their corresponding -- index difference denotes the number of leap seconds elapsed. Start_Index := 1; loop exit when Leap_Second_Times (Start_Index) >= Start_T; Start_Index := Start_Index + 1; end loop; End_Index := Start_Index; loop exit when End_Index > Leap_Seconds_Count or else Leap_Second_Times (End_Index) >= End_T; End_Index := End_Index + 1; end loop; if End_Index <= Leap_Seconds_Count then Next_Leap_Sec := Leap_Second_Times (End_Index); end if; Elapsed_Leaps := End_Index - Start_Index; else Elapsed_Leaps := 0; end if; end Cumulative_Leap_Seconds; --------- -- Day -- --------- function Day (Date : Time) return Day_Number is Y : Year_Number; M : Month_Number; D : Day_Number; S : Day_Duration; begin Split (Date, Y, M, D, S); return D; end Day; ------------- -- Is_Leap -- ------------- function Is_Leap (Year : Year_Number) return Boolean is begin -- Leap centenial years if Year mod 400 = 0 then return True; -- Non-leap centenial years elsif Year mod 100 = 0 then return False; -- Regular years else return Year mod 4 = 0; end if; end Is_Leap; ----------- -- Month -- ----------- function Month (Date : Time) return Month_Number is Y : Year_Number; M : Month_Number; D : Day_Number; S : Day_Duration; begin Split (Date, Y, M, D, S); return M; end Month; ------------- -- Seconds -- ------------- function Seconds (Date : Time) return Day_Duration is Y : Year_Number; M : Month_Number; D : Day_Number; S : Day_Duration; begin Split (Date, Y, M, D, S); return S; end Seconds; ----------- -- Split -- ----------- procedure Split (Date : Time; Year : out Year_Number; Month : out Month_Number; Day : out Day_Number; Seconds : out Day_Duration) is H : Integer; M : Integer; Se : Integer; Ss : Duration; Le : Boolean; begin -- Use UTC as the local time zone on VMS, the status of flag Is_Ada_05 -- is irrelevant in this case. Formatting_Operations.Split (Date => Date, Year => Year, Month => Month, Day => Day, Day_Secs => Seconds, Hour => H, Minute => M, Second => Se, Sub_Sec => Ss, Leap_Sec => Le, Is_Ada_05 => False, Time_Zone => 0); -- Validity checks if not Year'Valid or else not Month'Valid or else not Day'Valid or else not Seconds'Valid then raise Time_Error; end if; end Split; ------------- -- Time_Of -- ------------- function Time_Of (Year : Year_Number; Month : Month_Number; Day : Day_Number; Seconds : Day_Duration := 0.0) return Time is -- The values in the following constants are irrelevant, they are just -- placeholders; the choice of constructing a Day_Duration value is -- controlled by the Use_Day_Secs flag. H : constant Integer := 1; M : constant Integer := 1; Se : constant Integer := 1; Ss : constant Duration := 0.1; begin if not Year'Valid or else not Month'Valid or else not Day'Valid or else not Seconds'Valid then raise Time_Error; end if; -- Use UTC as the local time zone on VMS, the status of flag Is_Ada_05 -- is irrelevant in this case. return Formatting_Operations.Time_Of (Year => Year, Month => Month, Day => Day, Day_Secs => Seconds, Hour => H, Minute => M, Second => Se, Sub_Sec => Ss, Leap_Sec => False, Use_Day_Secs => True, Is_Ada_05 => False, Time_Zone => 0); end Time_Of; ----------------- -- To_Duration -- ----------------- function To_Duration (T : Time) return Duration is function Time_To_Duration is new Ada.Unchecked_Conversion (Time, Duration); begin return Time_To_Duration (T * 100); end To_Duration; ---------------------- -- To_Relative_Time -- ---------------------- function To_Relative_Time (D : Duration) return Time is function Duration_To_Time is new Ada.Unchecked_Conversion (Duration, Time); begin return Duration_To_Time (D / 100.0); end To_Relative_Time; ---------- -- Year -- ---------- function Year (Date : Time) return Year_Number is Y : Year_Number; M : Month_Number; D : Day_Number; S : Day_Duration; begin Split (Date, Y, M, D, S); return Y; end Year; -- The following packages assume that Time is a Long_Integer, the units -- are 100 nanoseconds and the starting point in the VMS Epoch. --------------------------- -- Arithmetic_Operations -- --------------------------- package body Arithmetic_Operations is --------- -- Add -- --------- function Add (Date : Time; Days : Long_Integer) return Time is pragma Unsuppress (Overflow_Check); Res_M : Time; begin -- Trivial case if Days = 0 then return Date; end if; Res_M := Date + Time (Days) * Milis_In_Day; Check_Within_Time_Bounds (Res_M); return Res_M; exception when Constraint_Error => raise Time_Error; end Add; ---------------- -- Difference -- ---------------- procedure Difference (Left : Time; Right : Time; Days : out Long_Integer; Seconds : out Duration; Leap_Seconds : out Integer) is Mili_F : constant Duration := 10_000_000.0; Diff_M : Time; Diff_S : Time; Earlier : Time; Elapsed_Leaps : Natural; Later : Time; Negate : Boolean := False; Next_Leap : Time; Sub_Seconds : Duration; begin -- This classification is necessary in order to avoid a Time_Error -- being raised by the arithmetic operators in Ada.Calendar. if Left >= Right then Later := Left; Earlier := Right; else Later := Right; Earlier := Left; Negate := True; end if; -- If the target supports leap seconds, process them if Leap_Support then Cumulative_Leap_Seconds (Earlier, Later, Elapsed_Leaps, Next_Leap); if Later >= Next_Leap then Elapsed_Leaps := Elapsed_Leaps + 1; end if; -- The target does not support leap seconds else Elapsed_Leaps := 0; end if; Diff_M := Later - Earlier - Time (Elapsed_Leaps) * Mili; -- Sub second processing Sub_Seconds := Duration (Diff_M mod Mili) / Mili_F; -- Convert to seconds. Note that his action eliminates the sub -- seconds automatically. Diff_S := Diff_M / Mili; Days := Long_Integer (Diff_S / Secs_In_Day); Seconds := Duration (Diff_S mod Secs_In_Day) + Sub_Seconds; Leap_Seconds := Integer (Elapsed_Leaps); if Negate then Days := -Days; Seconds := -Seconds; if Leap_Seconds /= 0 then Leap_Seconds := -Leap_Seconds; end if; end if; end Difference; -------------- -- Subtract -- -------------- function Subtract (Date : Time; Days : Long_Integer) return Time is pragma Unsuppress (Overflow_Check); Res_M : Time; begin -- Trivial case if Days = 0 then return Date; end if; Res_M := Date - Time (Days) * Milis_In_Day; Check_Within_Time_Bounds (Res_M); return Res_M; exception when Constraint_Error => raise Time_Error; end Subtract; end Arithmetic_Operations; --------------------------- -- Formatting_Operations -- --------------------------- package body Formatting_Operations is ----------------- -- Day_Of_Week -- ----------------- function Day_Of_Week (Date : Time) return Integer is Y : Year_Number; M : Month_Number; D : Day_Number; S : Day_Duration; Day_Count : Long_Integer; Midday_Date_S : Time; begin Split (Date, Y, M, D, S); -- Build a time value in the middle of the same day and convert the -- time value to seconds. Midday_Date_S := Time_Of (Y, M, D, 43_200.0) / Mili; -- Count the number of days since the start of VMS time. 1858-11-17 -- was a Wednesday. Day_Count := Long_Integer (Midday_Date_S / Secs_In_Day) + 2; return Integer (Day_Count mod 7); end Day_Of_Week; ----------- -- Split -- ----------- procedure Split (Date : Time; Year : out Year_Number; Month : out Month_Number; Day : out Day_Number; Day_Secs : out Day_Duration; Hour : out Integer; Minute : out Integer; Second : out Integer; Sub_Sec : out Duration; Leap_Sec : out Boolean; Is_Ada_05 : Boolean; Time_Zone : Long_Integer) is -- The flag Is_Ada_05 is present for interfacing purposes pragma Unreferenced (Is_Ada_05); procedure Numtim (Status : out Unsigned_Longword; Timbuf : out Unsigned_Word_Array; Timadr : Time); pragma Interface (External, Numtim); pragma Import_Valued_Procedure (Numtim, "SYS$NUMTIM", (Unsigned_Longword, Unsigned_Word_Array, Time), (Value, Reference, Reference)); Status : Unsigned_Longword; Timbuf : Unsigned_Word_Array (1 .. 7); Ada_Min_Year : constant := 1901; Ada_Max_Year : constant := 2399; Mili_F : constant Duration := 10_000_000.0; Date_M : Time; Elapsed_Leaps : Natural; Next_Leap_M : Time; begin Date_M := Date; -- Step 1: Leap seconds processing if Leap_Support then Cumulative_Leap_Seconds (Start_Of_Time, Date, Elapsed_Leaps, Next_Leap_M); Leap_Sec := Date_M >= Next_Leap_M; if Leap_Sec then Elapsed_Leaps := Elapsed_Leaps + 1; end if; -- The target does not support leap seconds else Elapsed_Leaps := 0; Leap_Sec := False; end if; Date_M := Date_M - Time (Elapsed_Leaps) * Mili; -- Step 2: Time zone processing if Time_Zone /= 0 then Date_M := Date_M + Time (Time_Zone) * 60 * Mili; end if; -- After the leap seconds and time zone have been accounted for, -- the date should be within the bounds of Ada time. if Date_M < Ada_Low or else Date_M > Ada_High then raise Time_Error; end if; -- Step 3: Sub second processing Sub_Sec := Duration (Date_M mod Mili) / Mili_F; -- Drop the sub seconds Date_M := Date_M - (Date_M mod Mili); -- Step 4: VMS system call Numtim (Status, Timbuf, Date_M); if Status mod 2 /= 1 or else Timbuf (1) not in Ada_Min_Year .. Ada_Max_Year then raise Time_Error; end if; -- Step 5: Time components processing Year := Year_Number (Timbuf (1)); Month := Month_Number (Timbuf (2)); Day := Day_Number (Timbuf (3)); Hour := Integer (Timbuf (4)); Minute := Integer (Timbuf (5)); Second := Integer (Timbuf (6)); Day_Secs := Day_Duration (Hour * 3_600) + Day_Duration (Minute * 60) + Day_Duration (Second) + Sub_Sec; end Split; ------------- -- Time_Of -- ------------- function Time_Of (Year : Year_Number; Month : Month_Number; Day : Day_Number; Day_Secs : Day_Duration; Hour : Integer; Minute : Integer; Second : Integer; Sub_Sec : Duration; Leap_Sec : Boolean; Use_Day_Secs : Boolean; Is_Ada_05 : Boolean; Time_Zone : Long_Integer) return Time is procedure Cvt_Vectim (Status : out Unsigned_Longword; Input_Time : Unsigned_Word_Array; Resultant_Time : out Time); pragma Interface (External, Cvt_Vectim); pragma Import_Valued_Procedure (Cvt_Vectim, "LIB$CVT_VECTIM", (Unsigned_Longword, Unsigned_Word_Array, Time), (Value, Reference, Reference)); Status : Unsigned_Longword; Timbuf : Unsigned_Word_Array (1 .. 7); Mili_F : constant := 10_000_000.0; Y : Year_Number := Year; Mo : Month_Number := Month; D : Day_Number := Day; H : Integer := Hour; Mi : Integer := Minute; Se : Integer := Second; Su : Duration := Sub_Sec; Elapsed_Leaps : Natural; Int_Day_Secs : Integer; Next_Leap_M : Time; Res_M : Time; Rounded_Res_M : Time; begin -- No validity checks are performed on the input values since it is -- assumed that the called has already performed them. -- Step 1: Hour, minute, second and sub second processing if Use_Day_Secs then -- A day seconds value of 86_400 designates a new day if Day_Secs = 86_400.0 then declare Adj_Year : Year_Number := Year; Adj_Month : Month_Number := Month; Adj_Day : Day_Number := Day; begin if Day < Days_In_Month (Month) or else (Month = 2 and then Is_Leap (Year)) then Adj_Day := Day + 1; -- The day adjustment moves the date to a new month else Adj_Day := 1; if Month < 12 then Adj_Month := Month + 1; -- The month adjustment moves the date to a new year else Adj_Month := 1; Adj_Year := Year + 1; end if; end if; Y := Adj_Year; Mo := Adj_Month; D := Adj_Day; H := 0; Mi := 0; Se := 0; Su := 0.0; end; -- Normal case (not exactly one day) else -- Sub second extraction if Day_Secs > 0.0 then Int_Day_Secs := Integer (Day_Secs - 0.5); else Int_Day_Secs := Integer (Day_Secs); end if; H := Int_Day_Secs / 3_600; Mi := (Int_Day_Secs / 60) mod 60; Se := Int_Day_Secs mod 60; Su := Day_Secs - Duration (Int_Day_Secs); end if; end if; -- Step 2: System call to VMS Timbuf (1) := Unsigned_Word (Y); Timbuf (2) := Unsigned_Word (Mo); Timbuf (3) := Unsigned_Word (D); Timbuf (4) := Unsigned_Word (H); Timbuf (5) := Unsigned_Word (Mi); Timbuf (6) := Unsigned_Word (Se); Timbuf (7) := 0; Cvt_Vectim (Status, Timbuf, Res_M); if Status mod 2 /= 1 then raise Time_Error; end if; -- Step 3: Sub second adjustment Res_M := Res_M + Time (Su * Mili_F); -- Step 4: Bounds check Check_Within_Time_Bounds (Res_M); -- Step 5: Time zone processing if Time_Zone /= 0 then Res_M := Res_M - Time (Time_Zone) * 60 * Mili; end if; -- Step 6: Leap seconds processing if Leap_Support then Cumulative_Leap_Seconds (Start_Of_Time, Res_M, Elapsed_Leaps, Next_Leap_M); Res_M := Res_M + Time (Elapsed_Leaps) * Mili; -- An Ada 2005 caller requesting an explicit leap second or an -- Ada 95 caller accounting for an invisible leap second. if Leap_Sec or else Res_M >= Next_Leap_M then Res_M := Res_M + Time (1) * Mili; end if; -- Leap second validity check Rounded_Res_M := Res_M - (Res_M mod Mili); if Is_Ada_05 and then Leap_Sec and then Rounded_Res_M /= Next_Leap_M then raise Time_Error; end if; end if; return Res_M; end Time_Of; end Formatting_Operations; --------------------------- -- Time_Zones_Operations -- --------------------------- package body Time_Zones_Operations is --------------------- -- UTC_Time_Offset -- --------------------- function UTC_Time_Offset (Date : Time) return Long_Integer is -- Formal parameter Date is here for interfacing, but is never -- actually used. pragma Unreferenced (Date); function get_gmtoff return Long_Integer; pragma Import (C, get_gmtoff, "get_gmtoff"); begin -- VMS is not capable of determining the time zone in some past or -- future point in time denoted by Date, thus the current time zone -- is retrieved. return get_gmtoff; end UTC_Time_Offset; end Time_Zones_Operations; -- Start of elaboration code for Ada.Calendar begin -- Population of the leap seconds table if Leap_Support then declare type Leap_Second_Date is record Year : Year_Number; Month : Month_Number; Day : Day_Number; end record; Leap_Second_Dates : constant array (1 .. Leap_Seconds_Count) of Leap_Second_Date := ((1972, 6, 30), (1972, 12, 31), (1973, 12, 31), (1974, 12, 31), (1975, 12, 31), (1976, 12, 31), (1977, 12, 31), (1978, 12, 31), (1979, 12, 31), (1981, 6, 30), (1982, 6, 30), (1983, 6, 30), (1985, 6, 30), (1987, 12, 31), (1989, 12, 31), (1990, 12, 31), (1992, 6, 30), (1993, 6, 30), (1994, 6, 30), (1995, 12, 31), (1997, 6, 30), (1998, 12, 31), (2005, 12, 31)); Ada_Min_Year : constant Year_Number := Year_Number'First; Days_In_Four_Years : constant := 365 * 3 + 366; VMS_Days : constant := 10 * 366 + 32 * 365 + 45; Days : Natural; Leap : Leap_Second_Date; Years : Natural; begin for Index in 1 .. Leap_Seconds_Count loop Leap := Leap_Second_Dates (Index); -- Calculate the number of days from the start of Ada time until -- the current leap second occurence. Non-leap centenial years -- are not accounted for in these calculations since there are -- no leap seconds after 2100 yet. Years := Leap.Year - Ada_Min_Year; Days := (Years / 4) * Days_In_Four_Years; Years := Years mod 4; if Years = 1 then Days := Days + 365; elsif Years = 2 then Days := Days + 365 * 2; elsif Years = 3 then Days := Days + 365 * 3; end if; Days := Days + Cumulative_Days_Before_Month (Leap.Month); if Is_Leap (Leap.Year) and then Leap.Month > 2 then Days := Days + 1; end if; -- Add the number of days since the start of VMS time till the -- start of Ada time. Days := Days + Leap.Day + VMS_Days; -- Index - 1 previous leap seconds are added to Time (Index) Leap_Second_Times (Index) := (Time (Days) * Secs_In_Day + Time (Index - 1)) * Mili; end loop; end; end if; end Ada.Calendar;