2007-01-12 Richard Sandiford Nathan Sidwell * config/m68k/m68k.h (ASM_CPU_SPEC, ASM_SPEC, EXTRA_SPECS) (SUBTARGET_EXTRA_SPECS): New macros. * config/m68k/linux.h (ASM_SPEC): Remove CPU flags; use %(asm_cpu_spec) instead. * config/m68k/m68k-none.h (ASM_SPEC): Likewise. * config/m68k/openbsd.h (ASM_SPEC): Likewise. * config/m68k/netbsd-elf.h (ASM_SPEC): Likewise. (EXTRA_SPECS): Rename to... (SUBTARGET_EXTRA_SPECS): ...this. 2007-01-12 Nathan Sidwell Richard Sandiford Julian Brown * config.gcc (m68k-*-aout*, m68k-*-coff*, m68020-*-elf*, m68k-*-elf*) (m68k-*-uclinux*, m68k-*-linux*, m68k-*-rtems*): Set default_m68k_cpu to the configuration's default CPU. (m68010-*-netbsdelf*, m68k*-*-netbsdelf*, m68k*-*-openbsd*): Likewise. Remove default masks. (m680[012]0-*-*): Set the default with_cpu to the first part of the target name. (m68k*-*-*): Set the default with_cpu to m$default_m68k_cpu. (m68k*-*-linux): Extend the --with-cpu handling to... (m680[012]0-*-*, m68k*-*-*): ...these configurations. Allow m68000 and m68010. Don't set target_cpu_default2. * doc/install.texi: Document --with-cpu for m68k. * config/m68k/m68k.h (OPTION_DEFAULT_SPECS): Define. * config/m68k/m68k-none.h (TARGET_CPU_DEFAULT, M68K_CPU_m68k) (M68K_CPU_m68000, M68K_CPU_m68010, M68K_CPU_m68020, M68K_CPU_m68030) (M68K_CPU_m68040, M68K_CPU_m68302, M68K_CPU_m68332, TARGET_DEFAULT) (ASM_CPU_DEFAULT_SPEC, CC1_CPU_DEFAULT_SPEC): Delete. (ASM_SPEC): Remove use of %(asm_cpu_default). (EXTRA_SPECS, SUBTARGET_EXTRA_SPECS, MULTILIB_DEFAULTS): Delete. * config/m68k/linux.h (TARGET_DEFAULT): Delete. (CPP_SPEC): Merge definitions. Do not handle __HAVE_68881__ here. * config/m68k/netbsd-elf.h (TARGET_OS_CPP_BUILTINS): Define __HAVE_FPU__ if TARGET_HARD_FLOAT. (TARGET_DEFAULT): Delete. (EXTRA_SPECS): Delete cpp_cpu_default_spec, cpp_cpu_spec, cpp_fpu_spec, asm_default_spec and netbsd_cpp_spec. (CPP_CPU_SPEC): Delete. (TARGET_VERSION): Merge definitions, using TARGET_68010 to pick the appropriate string. (CPP_CPU_DEFAULT_SPEC, ASM_DEFAULT_SPEC, CPP_FPU_SPEC): Delete. (CPP_SPEC): Define to NETBSD_CPP_SPEC. (ASM_SPEC): Don't use %(asm_default_spec). * config/m68k/m68k.c (TARGET_DEFAULT_TARGET_FLAGS): Remove TARGET_DEFAULT and add MASK_68881. * config/m68k/m68k.md: Remove mention of TARGET_DEFAULT from comments. 2007-01-12 Richard Sandiford * config.gcc (m68010-*-netbsdelf*): Add MASK_68010. (m68k*-*-netbsdelf*, m68k*-*-openbsd*, m68k*-linux*): Add MASK_68010 alongside MASK_68020. * doc/invoke.texi: Document -m68010. * config/m68k/m68k.opt (m68010): New. * config/m68k/m68k.h (TARGET_CPU_CPP_BUILTINS): Define mc68010 if TUNE_68010. (TUNE_68010): New macro. * config/m68k/m68k-none.h (M68K_CPU_m68k, M68K_CPU_m68010) (M68K_CPU_m68020, M68K_CPU_m68030, M68K_CPU_m68040) (M68K_CPU_m68332): Add MASK_68010. * config/m68k/linux.h (TARGET_DEFAULT): Add MASK_68010 to fallback definition. * config/m68k/netbsd-elf.h (CPP_CPU_SPEC): Remove now-redundant defines. * config/m68k/m68k.c (MASK_ALL_CPU_BITS): Add MASK_68010. (m68k_handle_option): Handle OPT_m68010. Add MASK_68010 to all entries that use MASK_68020. (output_move_simode_const, output_move_himode, output_move_qimode) (output_move_stricthi, output_move_strictqi): Use TARGET_68010 instead of TARGET_68020 to select clr behavior. Remove comment about there being no TARGET_68010. * config/m68k/m68k.md: Likewise throughout. 2007-01-12 Julian Brown * config/m68k/m68k.h (TARGET_ISAB): New macro. * config/m68k/m68k.c: Use TARGET_ISAB rather than TARGET_CFV4. * config/m68k/m68k.md: Likewise. 2007-01-12 Julian Brown * config/m68k/m68k.h (LEGITIMATE_INDEX_P, LEGITIMIZE_ADDRESS): Use TARGET_COLDFIRE_FPU instead of TARGET_CFV4E. 2007-01-12 Julian Brown * config/m68k/m68k.h (TUNE_68040_60): New macro. * config/m68k/m68k.c (standard_68881_constant_p): Use it. * config/m68k/m68k.md: Likewise. 2007-01-12 Julian Brown Richard Sandiford * config/m68k/m68k.h (TARGET_CPU_CPP_BUILTINS): Use TUNE_68030 instead of TARGET_68030, TUNE_68040 instead of TARGET_68040, TUNE_68060 instead of TARGET_68060 and TUNE_CPU32 instead of TARGET_CPU32. (TARGET_CPU32): Rename to... (TUNE_CPU32): ...this. (TUNE_68000_10, TUNE_68030, TUNE_68040, TUNE_68060) (TUNE_CFV2): New macros. * config/m68k/netbsd-elf.h (LONG_DOUBLE_TYPE_SIZE): Simplify; remove conditions that are implied by TARGET_68020. * config/m68k/m68k.c (m68k_output_function_prologue): Use TUNE_68040 instead of TARGET_68040 and TUNE_CPU32 instead of TARGET_CPU32. (m68k_output_function_epilogue): Likewise. (m68k_rtx_costs): Likewise. Use TUNE_68060 instead of TARGET_68060 and TUNE_CFV2 instead of TARGET_5200. Use TUNE_68000_10 instead of "!TARGET_68020 && !TARGET_COLDFIRE" to choose between 68000 and non-68000 timings. Refactor multiplication and division costs. (output_addsi3): Use TUNE_68040 instead of TARGET_68040 and TUNE_CPU32 instead of TARGET_CPU32. (standard_68881_constant_p): Use TUNE_68040 instead of TARGET_68040 and TUNE_68060 instead of TARGET_68060. * config/m68k/m68k.md: Use TUNE_68040 instead of TARGET_68040, TUNE_68060 instead of TARGET_68060, and TUNE_CPU32 instead of TARGET_CPU32. (movsi_const0): Use TUNE_68000_10 rather than "!TARGET_68020 && !TARGET_COLDFIRE" to choose between moveq and clr. Likewise in the unnamed movsf pattern. (ashlsi_17_24, lshrsi_17_24): Guard with TUNE_68000_10 rather than "!TARGET_68020 && !TARGET_COLDFIRE". Likewise the unnamed ashiftrt pattern. 2007-01-12 Richard Sandiford * config/m68k/m68k.h (TARGET_CPU_CPP_BUILTINS): Increase amount of tabbing before backslashes. 2007-01-11 John David Anglin * pa-linux.h (ASM_OUTPUT_INTERNAL_LABEL): Undefine. * pa.h (ASM_OUTPUT_LABEL): Output colon when using GAS. (ASM_OUTPUT_INTERNAL_LABEL): Define. 2007-01-11 Zdenek Dvorak * tree-ssa-loop-ivopts.c (extract_cond_operands): Split from find_interesting_uses_cond. (find_interesting_uses_cond): Use extract_cond_operands. (rewrite_use_compare): Use extract_cond_operands and force_gimple_operand_bsi. Do not call update_stmt. (determine_use_iv_cost_condition): Use extract_cond_operands. Return cheaper of using original bound and changing the exit bound. 2007-01-11 Zdenek Dvorak PR tree-optimization/29516 * tree-ssa-address.c (tree_mem_ref_addr, add_to_parts, most_expensive_mult_to_index, addr_to_parts, create_mem_ref, maybe_fold_tmr): Make the type of fields of TARGET_MEM_REF sizetype. (move_fixed_address_to_symbol, move_pointer_to_base): New functions. * tree.def (TARGET_MEM_REF): Add comment on types of the operands. 2007-01-11 Joseph Myers * c-common.c (vector_types_convertible_p): Treat opaque types as always convertible if they have the same size, but not otherwise. 2007-01-11 Steven Bosscher * ifcvt.c (struct noce_if_info): Add comments to the fields. Remove the b_unconditional field. (noce_try_sign_mask): Do not look at b_unconditional. (noce_process_if_block): Do not use merge_if_blocks. Update the CFG here. Do not set b_unconditional. (cond_move_process_if_block): Likewise. (find_cond_trap): Likewise. (check_cond_move_block): Require simple jump insns at the end of the basic block. 2007-01-11 Jan Hubicka PR tree-optimization/1046 * tree-tailcall.c (suitable_for_tail_call_opt_p): Use TREE_ADDRESSABLE when alias info is not ready. (pass_tail_recursion): Do not require aliasing. * tree-ssa-copyrename.c (pass_rename_ssa_cop): Likewise. * tree-ssa-ccp.c (pass_ccp, pass_fold_builtins): Likewise. * tree-ssa-copy.c (pass_copy_prop): Likewise. * tree-ssa-forwprop.c (pass_forwprop): Likewise. * tree-ssa-dce.c (pass_dce, pass_dce_loop, pass_cd_dce): Likewise. * passes.c (init_optimization_passes): Execute rename_ssa_copies, ccp, forwprop, copy_prop, merge_phi, copy_prop, dce and tail recursion before inlining. * tree-ssa-operands.c (add_virtual_operand, get_indirect_ref_operand): When aliasing is not build, mark statement as volatile. 2007-01-11 Tom Tromey PR preprocessor/15185, PR preprocessor/20989: * doc/cppopts.texi <-MT>: Update description of algorithm for computing default target. <-M, -MD>: Reword "basename" text. 2007-01-11 Roger Sayle * builtins.c (expand_builtin_pow, expand_builtin_powi, fold_builtin_cabs, fold_builtin_sqrt, fold_builtin_trunc, fold_builtin_floor, fold_builtin_ceil, fold_builtin_round, fold_builtin_int_int_roundingfn, fold_builtin_bitop, fold_builtin_bswap, real_constp, fold_builtin_pow, fold_builtin_powi, fold_builtin_signbit, fold_builtin_copysign, do_mpfr_arg1, do_mpfr_arg2, do_mpfr_arg3, do_mpfr_sincos): Replace uses of the macro TREE_CONSTANT_OVERFLOW with TREE_OVERFLOW. * convert.c (convert_to_pointer): Likewise. * expr.c (highest_pow2_factor, expand_expr_real_1): Likewise. * fold-const.c (force_fit_type, fold_negate_expr, int_const_binop, const_binop, fold_convert_const_int_from_int, fold_convert_const_int_from_real, fold_convert_const_real_from_real, sign_bit_p, optimize_minmax_comparison, extract_muldiv_1, fold_div_compare, fold_sign_changed_comparison, fold_unary, fold_comparison, fold_binary, multiple_of_p, tree_Expr_non_zero_p, fold_negate_const, fold_abs_const, fold_not_const): Likewise. * print-tree.c (print_node_brief, print_node): Likewise. * stor-layout.c (place_field, layout_type): Likewise. * tree-chrec.c (keep_cast): Likewise. * tree.c (build_vector, build_real, build_real_from_int_cst, build_complex): Likewise. 2007-01-11 Roger Sayle * tree.h (TREE_CONSTANT_OVERFLOW): Obsolete. For the time being, treat TREE_CONSTANT_OVERFLOW as a synonym of TREE_OVERFLOW. 2007-01-11 Paolo Bonzini * configure.ac (strict1_warn): Rename to strict_warn. (WERROR, --enable-werror, symlink hacks, stage1_cflags, cc_set_by_configure, quoted_cc_set_by_configure, stage_prefix_set_by_configure, quoted_stage_prefix_set_by_configure, all_boot_languages, all_stagestuff): Remove. (target_list): Remove bootstrap targets. * Makefile.in (quickstrap): Unconditionally make a synonym of all. (BOOT_LANGUAGES, STAGE1_CFLAGS, STAGE1_CHECKING, REMAKEFLAGS, FLAGS_TO_PASS, PREPEND_DOTDOT_TO_RELATIVE_PATHS, SUBDIR_FLAGS_TO_PASS, WERROR_FLAGS, STRICT2_WARN, LANG_STAGESTUFF, VOL_FILES, POSTSTAGE1_FLAGS_TO_PASS, STAGE2_FLAGS_TO_PASS, STAGEPROFILE_FLAGS_TO_PASS, STAGEFEEDBACK_FLAGS_TO_PASS, stage1_build, stage1_copy, stage2_build, stage2_copy, stageprofile_build, stageprofile_copy, stage3_build, stage3_copy, stagefeedback_build, stagefeedback_copy, stage4_build, clean_s1, clean_sw, bootstrap, bootstrap-lean, bootstrap2, bootstrap2-lean, bootstrap3, bootstrap3-lean, bootstrap4, bootstrap4-lean, unstage1, unstage2, unstage3, unstage4, unstageprofile, unstagefeedback, restage, restage2, restage3, restage4, restageprofile, restagefeedback, bubbleestrap, cleanstrap, unstrap, restrap, *compare, *compare3, *compare4, *compare-lean, *compare3-lean, *compare4-lean, stage1-start, stage1, stage2-start, stage2, stage3-start, stage3, stage4-start, stage4, stageprofile-start, stageprofile, stagefeedback-start, stagefeedback, risky-stage1, risky-stage2, risky-stage3, risky-stage4): Remove. (ORDINARY_FLAGS_TO_PASS): Rename to FLAGS_TO_PASS. (STAGECOPYSTUFF, STAGEMOVESTUFF): Consolidate into MOSTLYCLEANFILES. (mostlyclean): Adjust. (clean, distclean): Don't mention bootstrap stuff. * configure: Regenerate. * ada/config-lang.in, cp/config-lang.in, forttran/config-lang.in, java/config-lang.in, objc/config-lang.in, objcp/config-lang.in, treelang/config-lang.in (stagestuff): Remove. * doc/sourcebuild.texi (stage1, stage2, stage3, stage4, stageprofile, stagefeedback, stagestuff): Remove mention. 2007-01-11 Nick Clifton * config/mcore/predicates.md (mcore_general_movesrc_operand): Accept CONSTs. (mcore_general_movdst_operand): Do not accept CONST_INTs. (mcore_arith_K_S_operand): Run the test for the S constraint not the test for the M constraint. (mcore_addsub_operand): Do not accept integer values that are larger than 32 bits. * config/mcore/mcore.md: Remove unused constraints from split. (andsi3): Use HOST_WIDE_INT instead of int to hold an INTVAL. (addsi3): Likewise. (allocate_stack): Likewise. * config/mcore/mcore.c (mcore_print_operand): Restrict output of P operands to 32 bits. (mcore_const_costs): Use HOST_WIDE_INT instead of int to hold an INTVAL. (mcore_and_cost, mcore_modify_comparison, const_ok_for_mcore, mcore_const_ok_for_inline, mcore_const_trick_uses_not, try_constant_tricks, mcore_num_ones, mcore_num_zeros, mcore_output_bclri, mcore_output_andn, output_inline_const, mcore_output_move, mcore_output_movedouble): Likewise. (mcore_output_cmov): Use CONST_OK_FOR_M and CONST_OK_FOR_N. (output_inline_const): Likewise. (output_inline_const): Fix format strings used in sprintf statements. * config/mcore/mcore-protos.h: Update prototypes for changed functions in mcore.c. * config/mcore/mcore.h (CONST_OK_FOR_I): Cast values to HOST_WIDE_INT and not int. (CONST_OK_FOR_J, CONST_OK_FOR_K, CONST_OK_FOR_L, CONST_OK_FOR_M, CONST_OK_FOR_N): Likewise. (LEGITIMATE_CONSTANT_P): Also check CONSTANT_P. (GO_IF_LEGITIMATE_INDEX): Use HOST_WIDE_INT instead of int to hold an INTVAL. 2007-01-10 Jan Hubicka * tree-vrp.c (remove_range_assertions): Release defs. * tree-ssa-loop-ivopts.c (rmeove_statement): Likewise. * tree-ssa-dom.c (remove_stmt_or_phi): Likewise. 2007-01-10 Paul Brook * config/arm/arm.c (arm_rtx_costs_1): Handle mutiply-subtract. * config/arm/arm.md (mulsi3subsi): New insn. 2007-01-10 Zdenek Dvorak * tree-ssa-loop-manip.c (tree_unroll_loop): Make it a wrapper over ... (tree_transform_and_unroll_loop): New. * tree-flow.h (transform_callback, tree_transform_and_unroll_loop): Declare. 2007-01-10 Robert Kennedy * fold-const.c (fold_comparison): Fold comparisons like (x * 1000 < 0) to (x < 0). 2007-01-10 Ian Lance Taylor * tree-pretty-print.c (dump_generic_node): Print parentheses when operands have the same priority. 2007-01-10 Tom Tromey * fold-const.c (fold_truthop): Don't check can_use_bit_fields_p. (fold_binary): Likewise. * langhooks.c (lhd_can_use_bit_fields_p): Removed. * langhooks-def.h (lhd_can_use_bit_fields_p): Removed. (LANG_HOOKS_CAN_USE_BIT_FIELDS_P): Removed. (LANG_HOOKS_INITIALIZER): Remove LANG_HOOKS_CAN_USE_BIT_FIELDS_P. * langhooks.h (struct lang_hooks): Removed field 'can_use_bit_fields_p'. 2007-01-10 Ralf Corsépius * config/bfin/t-bfin, config/bfin/t-bfin-elf: Remove GCC_CFLAGS. 2007-01-10 Razya Ladelsky * function.c (get_last_funcdef_no): New function. * function.h (get_last_funcdef_no): Declare. * tree-inline.c (initialize_cfun): Add initialization. (tree_function_versioning): Cleanup. 2007-01-10 Jan Hubicka * tree-inline.c (setup_one_parameter): Do not propagate into abnormal PHIs. 2007-01-10 Sa Liu Ben Elliston * spu.h (STACK_SAVE_AREA): Use VOIDmode for SAVE_FUNCTION, SImode for SAVE_NONLOCAL and Pmode for any other save level. * spu-protos.h (spu_restore_stack_block): Declare. * spu.md (save_stack_block): Remove. (restore_stack_block): Call spu_restore_stack_block. * spu.c (spu_restore_stack_block): New function. (spu_expand_epilogue): Remove old comment. 2007-01-09 Zdenek Dvorak PR tree-optimization/30322 * tree-ssa-loop-ivopts.c (fold_affine_expr, iv_value): Removed. (cand_value_at): Return the value as aff_tree. (may_eliminate_iv): Convert the bound from aff_tree to tree. * tree-affine.c (aff_combination_add_cst, aff_combination_add_product, aff_combination_mult): New functions. (aff_combination_add): Use aff_combination_add_cst. (aff_combination_convert): Allow conversions to a wider type. (tree_to_aff_combination): Handle BIT_NOT_EXPR. * tree-affine.h (aff_combination_mult): Declare. 2007-01-09 Carlos O'Donell * doc/tm.texi: Update documentation to reflect reality of exec and start file search behaviours. Update copyright year. * doc/invoke.texi: Explain how GCC_EXEC_PREFIX is used to find header file directories. 2007-01-09 Uros Bizjak * config/i386/i386.md (*sinxf2): Rename to *sinxf2_i387. (*cosxf2): Rename to cosxf2_i387. (*sindf2, *sinsf2): Extend operand 1 to XFmode. Macroize patterns using X87MODEF12 mode macro. Rename patterns to *sin_extendxf2_i387. Use SSE_FLOAT_MODE_P to disable patterns for SSE math. (*cosdf2, *cossf2): Ditto. (sincosdf3, sincossf3): Ditto. Rewrite corresponding splitters to match extended input operands. (sincos3): New expander. (*sinextendsfdf2, *cosextendsfdf2, *sincosextendsfdf3): Remove insn patterns and corresponding splitters. 2007-01-09 Kaz Kojima * config/sh/t-linux (TARGET_LIBGCC2_CFLAGS): Delete. (SHLIB_MAPFILES, SHLIB_LINK, SHLIB_INSTALL): Likewise. 2007-01-09 Nicolas Pitre PR target/30173 * arm/ieee754-df.S (Lad_s): Also test the low word of X for zero. 2007-01-08 Geoffrey Keating * target.h (struct gcc_target): New field library_rtti_comdat. * target-def.h (TARGET_CXX_LIBRARY_RTTI_COMDAT): New. (TARGET_CXX): Add TARGET_CXX_LIBRARY_RTTI_COMDAT. * doc/tm.texi (C++ ABI): Document TARGET_CXX_LIBRARY_RTTI_COMDAT. * config/darwin.h (TARGET_CXX_LIBRARY_RTTI_COMDAT): Define. 2007-01-08 Geoffrey Keating * doc/invoke.texi (Optimize Options): Correct description of -O0. 2007-01-08 Richard Guenther * tree.h (force_fit_type_double): Export. (force_fit_type): Remove. * fold-const.c (force_fit_type_double): New function. (force_fit_type): Remove. (int_const_binop): Use it. (fold_convert_const_int_from_int): Likewise. (fold_convert_const_int_from_real): Likewise. (fold_div_compare): Likewise. (fold_sign_changed_comparison): Likewise. (fold_unary): Likewise. (fold_negate_const): Likewise. (fold_abs_const): Likewise. (fold_not_const): Likewise. * c-common.c (shorten_compare): Use force_fit_type_double. * convert.c (convert_to_pointer): Likewise. 2007-01-08 Richard Guenther * tree.h (build_int_cst_wide_type): Export. * tree.c (build_int_cst_wide_type): New function. (build_int_cst_wide): Fix comment. * builtins.c (fold_builtin_object_size): Use build_int_cst to build -1 or 0 of the correct type. Use fit_double_type to check for overflow. * fold-const.c (optimize_bit_field_compare): Use build_int_cst_type to build the mask. (decode_field_reference): Likewise. (all_ones_mask_p): Likewise. (native_interpret_int): Use build_int_cst_wide_type. (fold_binary): Use build_int_cst_type to build an all-ones value. * stor-layout.c (set_sizetype): Use build_int_cst_wide_type. 2007-01-08 Daniel Jacobowitz * config/pa/t-pa64 (libgcc_stub.a): Use $(T). 2007-01-09 Ben Elliston * genautomata.c (STATS_OPTION): New option. (stats_flag): New flag. (gen_automata_option): Handle it. (initiate_automaton_gen): Ditto. (write_automata): Output statistics only if stats_flag is set. Likewise, output time statistics only if time_flag is set. * doc/md.texi (Processor pipeline description): Document new flag. 2007-01-08 Richard Guenther * builtins.c (fold_builtin_int_roundingfn): Use fit_double_type. * tree.c (build_int_cst_type): Likewise. (size_in_bytes): Don't call force_fit_type on the result. (int_fits_type_p): Use fit_double_type. * fold-const.c (fit_double_type): New function. (force_fit_type): Use it. * tree.h (fit_double_type): Export. 2007-01-08 Jan Hubicka * tree-vectorizer.c (gate_increase_alignment): Fix return type. * ipa.c (function_and_variable_visibility): Fix return type. 2007-01-08 Richard Guenther * tree-ssa-ccp.c (maybe_fold_offset_to_array_ref): Use type of offset to build the index. * tree-pretty-print.c (dump_generic_node): Don't build negated const just for printing. * c-pretty-print.c (pp_c_integer_constant): Likewise. * builtins.c (fold_builtin_int_roundingfn): Check if result fits the type by using force_fit_type and comparing the result. * predict.c (predict_loops): Use compare_tree_int for comparison. * tree.c (build_int_cst): Fall back to integer_type_node for NULL_TREE type. (build_int_cst_wide): Assert type is non-null. 2007-01-08 Roberto Costa * tree-vrp.c (extract_range_from_cond_expr): New. (extract_range_from_expr): Handle COND_EXPR nodes used as expressions. * tree-ssa-ccp.c (get_maxval_strlen): Handle COND_EXPR nodes used as expressions. (fold_stmt): Bug fix, avoid infinite recursion when folding COND_EXPRs. * tree-ssa-forwprop.c (simplify_cond, forward_propagate_into_cond, tree_ssa_forward_propagate_single_use_vars): Handle COND_EXPR nodes used as expressions. * tree-object-size.c (cond_expr_object_size): New. (collect_object_sizes_for): Handle COND_EXPR nodes used as expressions. 2007-01-08 Jan Hubicka * tree-ssa-forwprop.c (forward_propagate_into_cond, tree_ssa_forward_propagate_single_use_va): Release defs of propagated statement. 2007-01-08 Richard Guenther PR tree-optimization/23603 * tree-vrp.c (set_value_range_to_truthvalue): New function. (extract_range_from_binary): Fall back to truthvalue instead of varying for TRUTH_*_EXPR. (extract_range_from_comparison): Fall back to truthvalue instead of varying. (vrp_visit_phi_node): Don't adjust new range bounds to +INF/-INF if all visited PHI values were constant. 2007-01-08 Jan Hubicka * cgraphunit.c (cgraph_process_new_functions): Reset reachable flag. (cgraph_analyze_function): break out from ... (cgraph_finalize_compilation_unit): ... here. (cgraph_expand_function): Remove forgoten commented out line. (cgraph_optimize): Analyze functions. 2007-01-08 Jan Hubicka * tree-pas.h (TODO_remove_function): New flag. (TODO_update*): Renumber. (pass_ipa_increase_alignment, pass_ipa_function_and_variable_visibility): New passes. * cgraphunit.c (cgraph_increase_alignment): Move to tree-vectorizer.c (cgraph_function_and_variable_visibility): Move to ipa.c (cgraph_optimize): Don't call cgraph_function_and_variable_visibility, cgraph_increase_alignment. * ipa-inline.c (cgraph_decide_inlining): Don't push timevar. (cgraph_decide_inlining_incrementally): Push TV_INTEGRATION before calling tree-inline. (cgraph_early_inlining): Do not call cgraph_remove_unreachable_nodes. (pass_ipa_inline, pass_early_ipa_inlining): Set TODO_remove_functions * tree-vectorizer.c (increase_alignment): Move here from cgraphunit.c (gate_increase_alignment): New function. (pass_ipa_increase_alignment): New pass. * ipa.c: Inline tree-pass.h and timevar.h (function_and_variable_visibility): Move here from cgraphunit.c * tree-optimize.c (pass_early_local_passes): Add TODO_remove_functions. * passes.c (init_optimization_passes): Add the two new passes. (execute_todo): Handle cgraph_remove_functions. 2007-01-08 Nick Clifton * config/frv/predicates.md (reg_or_0_operand): Accept CONST_DOUBLEs. 2007-01-08 Ralf Corsépius * config/bfin/rtems.h, config/bfin/t-rtems: New. * config.gcc: Add bfin*-rtems*. 2007-01-08 Mark Shinwell * c.opt: Add -flax-vector-conversions. * c-typeck.c (convert_for_assignment): Pass flag to vector_types_convertible_p to allow emission of note. (digest_init): Likewise. * c-opts.c: Handle -flax-vector-conversions. * c-common.c (flag_lax_vector_conversions): New. (vector_types_convertible_p): Unless -flax-vector conversions has been passed, disallow conversions between vectors with differing numbers of subparts and/or element types. If such a conversion is disallowed, possibly emit a note on the first occasion only to inform the user of -flax-vector-conversions. The new last argument specifies this. * c-common.h (flag_lax_vector_conversions): New. (vector_types_convertible_p): Add extra argument. * config/i386/i386.c (ix86_init_mmx_sse_builtins): Use char_type_node for V*QI type vectors. * config/rs6000/rs6000-c.c (altivec_overloaded_builtins): Update to satisfy new typechecking rules. * config/rs6000/altivec.h (vec_cmple): Use vec_cmpge, for both C and C++ variants. * doc/invoke.texi (C Dialect Options): Document -flax-vector-conversions. 2007-01-08 Mark Shinwell PR tree-optimization/29877 * tree-ssa-ter.c (is_replaceable_p): Deem assignments with a register variable on the RHS to not be replaceable. 2007-01-08 Chen Liqin * config/score/t-score-elf (MULTILIB_OPTIONS): Change. * config/score/predicates.md (const_uimm5, sr0_operand, const_simm12, const_simm15, const_pow2, const_npow2): Added. * config/score/misc.md (insv, extv, extzv, movmemsi, move_lbu_a/b, mov_lhu_a/b etc): Added and fix some bug. * config/score/score.c (score_address_cost, score_select_cc_mode): Added. Change CONST_OK_FOR_LETTER_P/EXTRA_CONSTRAINT define. Update score_rtx_costs for MACRO TARGET_RTX_COSTS. Update score_print_operand. * config/score/score.h (DATA_ALIGNMENT, SELECT_CC_MODE): Added. Adjust register allocate order and update some macro define. * config/score/score-mdaux.c (mdx_unaligned_load, mdx_unsigned_store, mdx_block_move_straight, mdx_block_move_loop_head, mdx_block_move_loop_body, mdx_block_move_loop_foot, mdx_block_move_loop, mdx_block_move): Added. (mdx_movsicc, mdp_select_add_imm, mdp_select, mds_zero_extract_andi, mdp_limm): Updated and fix some bug and typo. * config/score/score.md (movqi/hi/si, add/sub/zero/ext): Updated. (movsf, movdf, doloop_end): Added. 2007-01-08 Kazu Hirata * config/arm/arm.c, config/arm/arm.h, config/arm/arm.md, config/arm/thumb2.md: Fix comment typos. * doc/extend.texi: Fix a typo. 2007-01-07 Eric Christopher * configure.ac: Check for __stack_chk_fail for darwin. * configure: Regenerate. 2007-01-07 Richard Guenther * tree-vrp.c (extract_range_from_assert): CSE calls to compare_values where possible. (extract_range_from_unary_expr): Likewise. 2007-01-07 Anatoly Sokolov * config/avr/avr-protos.h (call_insn_operand): Delete prototype. * config/avr/avr.c (call_insn_operand): Delete function. * config/avr/avr.md (*pushqi, *pushhi, *pushsi, *pushsf): Use REG_SP instead of register number. Use predicates. * config/avr/predicates.md (const0_operand, reg_or_0_operand, call_insn_operand): Add. 2007-01-06 Jan Hubicka * tree-pass.h (pass_build_cgraph_edges): Declare. * cgraphunit.c (record_refernece): Move to cgraphbuild.c (visited_nodes): Remove. (cgraph_create_edges): Move to cgraphbuild.c; rename to build_cgrpah_edges; make visited_nodes local. (cgraph_process_new_functions): DO not call initialize_inline_failed. (record_references_in_initializer): Move to cgraphbuild.c (initialize_inline_failed, rebuild_cgraph_edges, pass_rebuild_cgraph_edges): Move to cgraphbuild.c. (verify_cgraph_node): Make visited_nodes local. (cgraph_analyze_function): Do not call cgraph_create_edges and initialize_inline_failed. (cgraph_expand_function): Do not call cgraph_lower_function; assert that function is already lowered. * Makefile.in (cgraphbuild.o): New. * passes.c (init_optimization_passes): Add pass_build_cgraph_edges at the end of lowering passes. 2007-01-06 Steven Bosscher * ifcvt.c (cond_move_convert_if_block): New function, code factored out from... (cond_move_process_if_block): ...here. Call the new function on the THEN and ELSE blocks. (merge_if_block): Do not copy global_live_at_end, merge_blocks already takes care of this. 2007-01-05 Manuel Lopez-Ibanez PR c/19978 * tree.h (TREE_OVERFLOW_P): New. * c-typeck.c (parser_build_unary_op): Warn only if result overflowed and operands did not. (parser_build_binary_op): Likewise. (convert_for_assignment): Remove redundant overflow_warning. * c-common.c (overflow_warning): Don't check or set TREE_OVERFLOW. 2007-01-05 Manuel Lopez-Ibanez * c-typeck.c (store_init_value): Split over two lines to follow the GNU coding style. 2007-01-05 Benjamin Kosnik * c-cppbuiltin.c (c_cpp_builtins): __GXX_EXPERIMENTAL_CPP0X__ to __GXX_EXPERIMENTAL_CXX0X__. * doc/cpp.texi: Same. 2007-01-05 Richard Guenther PR middle-end/27826 * tree.c (get_narrower): Do not construct COMPONENT_REFs with mismatched types. Instead explicitly build a conversion NOP_EXPR. 2007-01-05 Ian Lance Taylor * c-common.c (decl_with_nonnull_addr_p): New function. (c_common_truthvalue_conversion): Call it. * c-typeck.c (build_binary_op): Likewise. * c-common.h (decl_with_nonnull_addr_p): Declare. 2007-01-05 Jakub Jelinek PR c/30360 * libgcc2.c (__divdc3): Compare c and d against 0.0 instead of denom against 0.0. 2007-01-05 Joel Brobecker * doc/install.texi (Final install): Document the fact that the GNAT runtime should not be stripped. 2007-01-04 Jan Hubicka * tree-inline.c (fold_marked_statements): Update operand caches and EH after folding 2007-01-04 Ian Lance Taylor * c-common.c (check_function_nonnull): Whitespace fix. 2007-01-04 Jan Hubicka * tree-optimize.c (execute_fixup_cfg): Correct previously mistakely comitted older version of patch. (pass_fixup_cfg): Add TODOs to verify flow and statements, dump function, celanup cfg and collect garbage. 2007-01-04 Mike Stump * Makefile.in (mostlyclean): Don't remove libgcc anymore. (clean): Likewise. 2007-01-04 Eric Christopher * libgcc2.c (__bswapsi2): Use SItype. (__bswapdi2): Use DItype. * libgcc2.h: Update for above. 2007-01-04 Paul Brook * config/arm/arm.md (arm_mulsi3, thumb_mulsi3, mulsi3_compare0, mulsi_compare0_scratch, mulsi3addsi, mulsi3addsi_compare0, mulsi3addsi_compare0_scratch, mulsidi3adddi, mulsidi3, umulsidi3, umulsidi3adddi, smulsi3_highpart, umulsi3_highpart): Make conditional on !arm_arch6. (arm_mulsi3_v6, thumb_mulsi3_v6, mulsi3_compare0_v6, mulsi_compare0_scratch_v6, mulsi3addsi_v6, mulsi3addsi_compare0_v6, mulsi3addsi_compare0_scratch_v6, mulsidi3adddi_v6, mulsidi3_v6, umulsidi3_v6, umulsidi3adddi_v6, smulsi3_highpart_v6, umulsi3_highpart_v6): New insns. 2007-01-04 Roger Sayle * fold-const.c (fold_convert): When casting an expression to void, fold_ignored_result may discover a GIMPLE_MODIFY_STMT which doesn't have a type. Instead of attempting to build a NOP_EXPR, return these "special" trees directly. 2007-01-04 Joseph Myers * config/rs6000/rs6000.c (rs6000_rtx_costs): Make adjustment for MULT inside MINUS as either argument. Use rs6000_cost->dmul - rs6000_cost->fp not 0 as adjustment for outer NEG. 2007-01-04 Jan Hubicka * cgraph.c (cgraph_release_function_body): New function. (cgraph_remove_node): Use it. * cgraph.h (cgraph_release_function_body): Declare. * cgraphunit.c (cgraph_expand_function): Use it. * ipa.c (cgraph_remove_unreahchable_nodes): Use it. * tree-ssa.c (delete_tree_ssa): Allow to be called before aliasing is initialized and while compilation of other function is running. * tree-optimize.c (execute_free_cfg_annotations): Move code to clear statement CFG annotations from here to ... * tree-cfg.c (delete_tree_cfg_annotations): ... here. 2007-01-04 Zdenek Dvorak * cfgloop.h (enum li_flags): Make the constants powers of two. 2007-01-04 Jan Hubicka * tree-inline.c (copy_bb): Insert new statements to statements_to_fold set. (fold_marked_statements): New function. (optimize_inline_calls, tree_function_versioning): Fold new statements. * tree-inline.h (copy_body_data): Add statements_to_fold. 2007-01-03 Daniel Jacobowitz * config.gcc: Mention libgcc/config.host. * Makefile.in: Update comments mentioning libgcc. (LIBGCC, INSTALL_LIBGCC, GCC_PARTS, mklibgcc): Delete. (all.cross, start.encap, rest.encap, rest.cross): Update dependencies for libgcc move. (libgcc.mk, LIBGCC_DEPS, libgcov.a, libgcc.a, stmp-multilib) (clean-target, clean-target-libgcc): Delete. (srcdirify, GCC_EXTRA_PARTS): New macros. (libgcc-support, libgcc.mvars): New rules. (distclean): Remove mention of mklibgcc. (install): Don't reference INSTALL_LIBGCC. (install-common): Don't reference EXTRA_PARTS. (install-libgcc, install-multilib): Delete rules. * mklibgcc.in: Delete file. * doc/configfiles.texi: Don't mention mklibgcc. * config/i386/t-darwin (SHLIB_VERPFX): Delete (moved to libgcc). * config/i386/t-darwin64 (SHLIB_VERPFX): Likewise. * config/rs6000/t-darwin (SHLIB_VERPFX): Likewise. * config/rs6000/t-ppccomm (TARGET_LIBGCC2_CFLAGS, SHLIB_MAPFILES) (mklibgcc, ldblspecs): Likewise. * config/i386/t-nwld (libgcc.def, libc.def, libpcre.def) (posixpre.def): Use $(T). (SHLIB_EXT, SHLIB_NAME, SHLIB_SLIBDIR_QUAL, SHLIB_DEF, SHLIB_MAP) (SHLIB_SRC, SHLIB_INSTALL): Delete. (SHLIB_LINK): Make dummy. * config/t-slibgcc-darwin: Delete contents except for dummy SHLIB_LINK. * config/frv/t-linux (EXTRA_MULTILIB_PARTS): Clear. * config/alpha/t-crtfm: Use $(T) in rules for EXTRA_PARTS. * config/alpha/t-vms, config/alpha/t-vms64, config/fr30/t-fr30, config/i386/t-rtems-i386, config/ia64/t-ia64, config/rs6000/t-beos, config/rs6000/t-newas, config/sparc/t-elf: Likewise. * configure.ac (all_outputs): Remove mklibgcc. * configure: Regenerated. 2007-01-03 Josh Conner PR middle-end/29683 * calls.c (compute_argument_addresses): Set stack and stack_slot for partial args, too. (store_one_arg): Use locate.size.constant for the size when generating a save_area. 2007-01-03 Robert Kennedy * tree-cfg.c (tree_merge_blocks): Release SSA_NAME phi results whose definitions are deleted due to basic block merging. 2007-01-03 Paul Brook PR target/16634 * config/arm/arm.c (output_return_instruction): Pop PC in interrupt functions. (use_return_insn): Return 0 for Thumb interrupt functions. (print_multi_reg): Add rfe argument for IRQ returns. (arm_output_epilogue): Pop interrupt return address directly into PC. (arm_expand_prologue): Only adjust IRQ return address in Arm mode. 2007-01-03 Paul Brook Merge from sourcerygxx-4_1. * config/arm/thumb2.md: New file. * config/arm/elf.h (JUMP_TABLES_IN_TEXT_SECTION): Return True for Thumb-2. * config/arm/coff.h (JUMP_TABLES_IN_TEXT_SECTION): Ditto. * config/arm/aout.h (ASM_OUTPUT_ADDR_VEC_ELT): Add !Thumb-2 assertion. (ASM_OUTPUT_ADDR_DIFF_ELT): Output Thumb-2 jump tables. * config/arm/aof.h (ASM_OUTPUT_ADDR_DIFF_ELT): Output Thumb-2 jump tables. (ASM_OUTPUT_ADDR_VEC_ELT): Add !Thumb-2 assertion. * config/arm/ieee754-df.S: Use macros for Thumb-2/Unified asm comptibility. * config/arm/ieee754-sf.S: Ditto. * config/arm/arm.c (thumb_base_register_rtx_p): Rename... (thumb1_base_register_rtx_p): ... to this. (thumb_index_register_rtx_p): Rename... (thumb1_index_register_rtx_p): ... to this. (thumb_output_function_prologue): Rename... (thumb1_output_function_prologue): ... to this. (thumb_legitimate_address_p): Rename... (thumb1_legitimate_address_p): ... to this. (thumb_rtx_costs): Rename... (thumb1_rtx_costs): ... to this. (thumb_compute_save_reg_mask): Rename... (thumb1_compute_save_reg_mask): ... to this. (thumb_final_prescan_insn): Rename... (thumb1_final_prescan_insn): ... to this. (thumb_expand_epilogue): Rename... (thumb1_expand_epilogue): ... to this. (arm_unwind_emit_stm): Rename... (arm_unwind_emit_sequence): ... to this. (thumb2_legitimate_index_p, thumb2_legitimate_address_p, thumb1_compute_save_reg_mask, arm_dwarf_handle_frame_unspec, thumb2_index_mul_operand, output_move_vfp, arm_shift_nmem, arm_save_coproc_regs, thumb_set_frame_pointer, arm_print_condition, thumb2_final_prescan_insn, thumb2_asm_output_opcode, arm_output_shift, thumb2_output_casesi): New functions. (TARGET_DWARF_HANDLE_FRAME_UNSPEC): Define. (FL_THUMB2, FL_NOTM, FL_DIV, FL_FOR_ARCH6T2, FL_FOR_ARCH7, FL_FOR_ARCH7A, FL_FOR_ARCH7R, FL_FOR_ARCH7M, ARM_LSL_NAME, THUMB2_WORK_REGS): Define. (arm_arch_notm, arm_arch_thumb2, arm_arch_hwdiv, arm_condexec_count, arm_condexec_mask, arm_condexec_masklen)): New variables. (all_architectures): Add armv6t2, armv7, armv7a, armv7r and armv7m. (arm_override_options): Check new CPU capabilities. Set new architecture flag variables. (arm_isr_value): Handle v7m interrupt functions. (user_return_insn): Return 0 for v7m interrupt functions. Handle Thumb-2. (const_ok_for_arm): Handle Thumb-2 constants. (arm_gen_constant): Ditto. Use movw when available. (arm_function_ok_for_sibcall): Return false for v7m interrupt functions. (legitimize_pic_address, arm_call_tls_get_addr): Handle Thumb-2. (thumb_find_work_register, arm_load_pic_register, legitimize_tls_address, arm_address_cost, load_multiple_sequence, emit_ldm_seq, emit_stm_seq, arm_select_cc_mode, get_jump_table_size, print_multi_reg, output_mov_long_double_fpa_from_arm, output_mov_long_double_arm_from_fpa, output_mov_double_fpa_from_arm, output_mov_double_fpa_from_arm, output_move_double, arm_compute_save_reg_mask, arm_compute_save_reg0_reg12_mask, output_return_instruction, arm_output_function_prologue, arm_output_epilogue, arm_get_frame_offsets, arm_regno_class, arm_output_mi_thunk, thumb_set_return_address): Ditto. (arm_expand_prologue): Handle Thumb-2. Use arm_save_coproc_regs. (arm_coproc_mem_operand): Allow POST_INC/PRE_DEC. (arithmetic_instr, shift_op): Use arm_shift_nmem. (arm_print_operand): Use arm_print_condition. Handle '(', ')', '.', '!' and 'L'. (arm_final_prescan_insn): Use extract_constrain_insn_cached. (thumb_expand_prologue): Use thumb_set_frame_pointer. (arm_file_start): Output directive for unified syntax. (arm_unwind_emit_set): Handle stack alignment instruction. * config/arm/lib1funcs.asm: Remove default for __ARM_ARCH__. Add v6t2, v7, v7a, v7r and v7m. (RETLDM): Add Thumb-2 code. (do_it, shift1, do_push, do_pop, COND, THUMB_SYNTAX): New macros. * config/arm/arm.h (TARGET_CPU_CPP_BUILTINS): Define __thumb2__. (TARGET_THUMB1, TARGET_32BIT, TARGET_THUMB2, TARGET_DSP_MULTIPLY, TARGET_INT_SIMD, TARGET_UNIFIED_ASM, ARM_FT_STACKALIGN, IS_STACKALIGN, THUMB2_TRAMPOLINE_TEMPLATE, TRAMPOLINE_ADJUST_ADDRESS, ASM_OUTPUT_OPCODE, THUMB2_GO_IF_LEGITIMATE_ADDRESS, THUMB2_LEGITIMIZE_ADDRESS, CASE_VECTOR_PC_RELATIVE, CASE_VECTOR_SHORTEN_MODE, ADDR_VEC_ALIGN, ASM_OUTPUT_CASE_END, ADJUST_INSN_LENGTH): Define. (TARGET_REALLY_IWMMXT, TARGET_IWMMXT_ABI, CONDITIONAL_REGISTER_USAGE, STATIC_CHAIN_REGNUM, HARD_REGNO_NREGS, INDEX_REG_CLASS, BASE_REG_CLASS, MODE_BASE_REG_CLASS, SMALL_REGISTER_CLASSES, PREFERRED_RELOAD_CLASS, SECONDARY_OUTPUT_RELOAD_CLASS, SECONDARY_INPUT_RELOAD_CLASS, LIBCALL_VALUE, FUNCTION_VALUE_REGNO_P, TRAMPOLINE_SIZE, INITIALIZE_TRAMPOLINE, HAVE_PRE_INCREMENT, HAVE_POST_DECREMENT, HAVE_PRE_DECREMENT, HAVE_PRE_MODIFY_DISP, HAVE_POST_MODIFY_DISP, HAVE_PRE_MODIFY_REG, HAVE_POST_MODIFY_REG, REGNO_MODE_OK_FOR_BASE_P, LEGITIMATE_CONSTANT_P, REG_MODE_OK_FOR_BASE_P, REG_OK_FOR_INDEX_P, GO_IF_LEGITIMATE_ADDRESS, LEGITIMIZE_ADDRESS, THUMB2_LEGITIMIZE_ADDRESS, GO_IF_MODE_DEPENDENT_ADDRESS, MEMORY_MOVE_COST, BRANCH_COST, ASM_APP_OFF, ASM_OUTPUT_CASE_LABEL, ARM_DECLARE_FUNCTION_NAME, FINAL_PRESCAN_INSN, PRINT_OPERAND_PUNCT_VALID_P, PRINT_OPERAND_ADDRESS): Adjust for Thumb-2. (arm_arch_notm, arm_arch_thumb2, arm_arch_hwdiv): New declarations. * config/arm/arm-cores.def: Add arm1156t2-s, cortex-a8, cortex-r4 and cortex-m3. * config/arm/arm-tune.md: Regenerate. * config/arm/arm-protos.h: Update prototypes. * config/arm/vfp.md: Enable patterns for Thumb-2. (arm_movsi_vfp): Add movw alternative. Use output_move_vfp. (arm_movdi_vfp, movsf_vfp, movdf_vfp): Use output_move_vfp. (thumb2_movsi_vfp, thumb2_movdi_vfp, thumb2_movsf_vfp, thumb2_movdf_vfp, thumb2_movsfcc_vfp, thumb2_movdfcc_vfp): New. * config/arm/libunwind.S: Add Thumb-2 code. * config/arm/constraints.md: Update include Thumb-2. * config/arm/ieee754-sf.S: Add Thumb-2/Unified asm support. * config/arm/ieee754-df.S: Ditto. * config/arm/bpabi.S: Ditto. * config/arm/t-arm (MD_INCLUDES): Add thumb2.md. * config/arm/predicates.md (low_register_operand, low_reg_or_int_operand, thumb_16bit_operator): New. (thumb_cmp_operand, thumb_cmpneg_operand): Rename... (thumb1_cmp_operand, thumb1_cmpneg_operand): ... to this. * config/arm/t-arm-elf: Add armv7 multilib. * config/arm/arm.md: Update patterns for Thumb-2 and Unified asm. Include thumb2.md. (UNSPEC_STACK_ALIGN, ce_count): New. (arm_incscc, arm_decscc, arm_umaxsi3, arm_uminsi3, arm_zero_extendsidi2, arm_zero_extendqidi2): New insns/expanders. * config/arm/fpa.md: Update patterns for Thumb-2 and Unified asm. (thumb2_movsf_fpa, thumb2_movdf_fpa, thumb2_movxf_fpa, thumb2_movsfcc_fpa, thumb2_movdfcc_fpa): New insns. * config/arm/cirrus.md: Update patterns for Thumb-2 and Unified asm. (cirrus_thumb2_movdi, cirrus_thumb2_movsi_insn, thumb2_cirrus_movsf_hard_insn, thumb2_cirrus_movdf_hard_insn): New insns. * doc/extend.texi: Document ARMv7-M interrupt functions. * doc/invoke.texi: Document Thumb-2 new cores+architectures. 2007-01-03 Jakub Jelinek * unwind-dw2.c (SIGNAL_FRAME_BIT, EXTENDED_CONTEXT_BIT): Define. (struct _Unwind_Context): Rename args_size to flags, remove signal_frame field, add a new args_size field and version field. (_Unwind_IsSignalFrame, _Unwind_SetSignalFrame, _Unwind_IsExtendedContext): New inline functions. (_Unwind_GetGR, _Unwind_SetGR, _Unwind_GetGRPtr, _Unwind_SetGRPtr): Assume by_value array is only present if _Unwind_IsExtendedContext. (_Unwind_GetIPInfo, execute_cfa_program, uw_frame_state_for): Use _Unwind_IsSignalFrame. (__frame_state_for): Initialize context.flags to EXTENDED_CONTEXT_BIT. (uw_update_context_1): Use _Unwind_SetSignalFrame. (uw_init_context_1): Initialize context->flags to EXTENDED_CONTEXT_BIT. * config/rs6000/linux-unwind.h (frob_update_context): Use _Unwind_SetSignalFrame. 2007-01-03 Andrew Pinski PR middle-end/30353 * gimplify.c (gimplify_modify_expr_complex_part): Move below tree_to_gimple_tuple. Call tree_to_gimple_tuple when we need the value. 2007-01-03 Kazu Hirata * config/i386/i386.h (NON_STACK_REG_P, REGNO_OK_FOR_SIREG_P, REGNO_OK_FOR_DIREG_P, REWRITE_ADDRESS, ASM_OPERAND_LETTER, RET, AT_SP): Remove. * config/i386/i386.md (*sse_prologue_save_insn): Use return instead of RET. * alias.c (init_alias_analysis): Use VEC_safe_grow_cleared. * cfgbuild.c (find_basic_blocks): Likewise. * cfgrtl.c (rtl_create_basic_block): Likewise. * function.c (temp_slots_at_level): Likewise. * reg-stack.c (stack_regs_mentioned): Likewise. * regclass.c (allocate_reg_info): Likewise. * tree-cfg.c (init_empty_tree_cfg, build_tree_cfg, create_bb, set_bb_for_stmt, move_block_to_fn): Likewise. * tree-complex.c (tree_lower_complex): Likewise. * vec.h (VEC_safe_grow_cleared): New. * cgraphunit.c, tree-ssa-alias.c: Fix comment typos. 2007-01-03 Zdenek Dvorak * loop-unswitch.c (unswitch_loop): Pass probabilities to loopify. * tree-ssa-loop-unswitch.c (tree_unswitch_loop): Pass probabilities to loop_version. * cfgloopmanip.c (scale_loop_frequencies): Export. (loopify): Scale the frequencies by prescribed coefficients. (set_zero_probability): New function. (duplicate_loop_to_header_edge): Improve updating of frequencies. (lv_adjust_loop_entry_edge, loop_version): Set probabilities and frequencies according to arguments. * tree-ssa-loop-manip.c (tree_unroll_loop): Set probabilities correctly. * cfg.c (scale_bbs_frequencies_int): Allow scaling the frequencies up. * modulo-sched.c (sms_schedule): Set probabilities for entering versioned loop correctly. * tree-vect-transform.c (vect_transform_loop): Ditto. * cfgloop.h (loopify, loop_version): Declaration changed. (scale_loop_frequencies): Declared. 2007-01-02 Jan Hubicka * cgraph.c: Include tree-flow.h (cgraph_add_new-function): Handle IPA_SSA mode; execute early_local_passes. * cgraph.h (enum cgraph_state): Add CGRAPH_STATE_IPA_SSA. * tree-pass.h (pass_all_early_optimizations): Declare. * cgraphunit.c (cgraph_process_new_functions): Add IPA_SSA; execute early_local_passes. (cgraph_analyze_function): Do early_local_passes. * tree-mudflap.c (mf_decl_cache_locals, mf_build_check_statement_for): Do not add referenced vars. * tree-optimize.c (gate_all_optimizations): Do not execute when not in SSA form. (gate_all_early_local_passes): New gate. (pass_early_local_passes): Use new gate. (execute_early_local_optimizations): New functions. (gate_all_early_optimizations): New gate. (pass_all_early_optimizations): New pass. (execute_free_datastructures): Free SSA only when initialized. (gate_init_datastructures): Init only when optimizing. (tree_lowering_passes): Do early local passes when called late. * tree-profile.c (do_tree_profiling): Don't profile functions added late. (do_early_tree_profiling, pass_early_tree_profile): Kill. * tree-cfg.c (update_modified_stmts): Do not update when operands are not active. * passes.c (init_optimizations_passes): Reorder so we go into SSA during early_local_passes. * Makefile.in (cgraph.o): Add dependency on tree-flow.h. 2007-01-02 Carlos O'Donell * Makefile.in: Update copyright year. 2007-01-02 Carlos O'Donell * Makefile.in: Export GCC_EXEC_PREFIX before calling $(RUNTEST) in $(lang_checks) and check-consistency targets. 2007-01-02 Jan Hubicka * tree-mudflap.c (mf_decl_cache_locals, mf_build_check_statement_for): Do not add referenced vars. * tree-cfg.c (update_modified_stmts): Do not update when SSA operands are not active. * passes.c (init_optimization_passes): Put mudflap_2 after free_datastructures. 2007-01-02 Jan Hubicka * tree-optimize (execute_fixup_cfg): Set after_inlining flag. Set NOTHROW flag on call statements proved to be nothrow. Update statement of local calls so new pure/const functions are updated. Update_ssa when in ssa form. Mark PHI nodes of nonlocal goto receivers. (tree_rest_of_compilation): Register hooks and initialize bitmap early. Do not set after_inlining flag. 2007-01-02 Steve Ellcey * sbitmap.c (HOST_BITS_PER_LONG_LONG): Change to HOST_BITS_PER_LONGLONG 2007-01-02 Manuel Lopez-Ibanez PR c/19977 * c-typeck.c (store_init_value): Don't emit pedantic overflow warning for non-static initializers. 2007-01-02 Steven Bosscher * config/alpha/alpha.md, arm/arm.c, darwin.c, frv/frv.md, m32r/m32r.c, m32r/m32r.c, mn10300/mn10300.md, pa/pa.c, rs6000/rs6000.c, s390/s390.md, sh/sh.md, sparc/sparc.c: Always use set_unique_reg_note to add REG_EQUAL notes. 2007-01-02 Kazu Hirata Revert: 2007-01-02 Kazu Hirata * alias.c (init_alias_analysis): Use VEC_safe_grow_cleared. * cfgbuild.c (find_basic_blocks): Likewise. * cfgrtl.c (rtl_create_basic_block): Likewise. * function.c (temp_slots_at_level): Likewise. * reg-stack.c (stack_regs_mentioned): Likewise. * regclass.c (allocate_reg_info): Likewise. * tree-cfg.c (init_empty_tree_cfg, build_tree_cfg, create_bb, set_bb_for_stmt, move_block_to_fn): Likewise. * tree-complex.c (tree_lower_complex): Likewise. * vec.h (VEC_safe_grow_cleared): New. 2007-01-02 Ian Lance Taylor * c-common.c (c_common_truthvalue_conversion): When warning about using an assignment as a truth value, set TREE_NO_WARNING. 2007-01-02 Manuel Lopez-Ibanez PR middle-end/7651 * c.opt (Wold-style-declaration): New. * doc/invoke.texi (C-only Warning Options): New. (Wold-style-declaration): Document it. (Wextra): Enabled by -Wextra. * c-opts.c (c_common_post_options): Enabled by -Wextra. * c-decl.c (declspecs_add_scspec): Replace -Wextra with -Wold-style-declaration. 2007-01-02 Kazu Hirata * alias.c (init_alias_analysis): Use VEC_safe_grow_cleared. * cfgbuild.c (find_basic_blocks): Likewise. * cfgrtl.c (rtl_create_basic_block): Likewise. * function.c (temp_slots_at_level): Likewise. * reg-stack.c (stack_regs_mentioned): Likewise. * regclass.c (allocate_reg_info): Likewise. * tree-cfg.c (init_empty_tree_cfg, build_tree_cfg, create_bb, set_bb_for_stmt, move_block_to_fn): Likewise. * tree-complex.c (tree_lower_complex): Likewise. * vec.h (VEC_safe_grow_cleared): New. 2007-01-02 Douglas Gregor * c-common.c(c_common_nodes_and_builtins): Since variants of void_type_node get built before it is given a name, we need to give those variants the name, too. (complete_array_type): We need to work with the canonical main type of the array, from which we will build the qualified version. * params.def (PARAM_VERIFY_CANONICAL_TYPES): New. * print-tree.c (print_node): Display canonical type information for each type. * stor-layout.c (layout_type): When we don't know the alignment of a type for which we're building an array, we end up guessing wrong, so make the type require structural equality. * tree.c (make_node_stat): When we build a new type, it is its own canonical type. (build_type_attribute_qual_variant): When building an attribute variant, its canonical type is the non-attribute variant. However, if the attributes are target-dependent and they differ, we need to use structural equality checks for this type. (build_qualified_type): A qualified type is not equivalent to its unqualified variant; set the canonical type appropriately. (build_distinct_type_copy): When building a distinct type from another type, the new type is its own canonical type. (build_variant_type_copy): When building a new type variant, we assume that it is equivalent to the original type. (build_pointer_type_for_mode): When building a pointer type, also build a canonical type pointer. (build_reference_type_for_mode): When building a reference type, also build a canonical type reference. (build_index_type): When we can't hash an index type (e.g., because its maximum value is negative), the index type requires structural equality tests. (build_array_type): Build the canonical form of an array type. (build_function_type): Function types require structural equality, because they contain default arguments, attributes, etc. (build_method_type_directly): Ditto for method types. (build_offset_type): Build the canonical offset type. (build_complex_type): Build the canonical vector type. (make_vector_type): Build the canonical vector type. * tree.h (TYPE_CANONICAL): New. (TYPE_STRUCTURAL_EQUALITY_P): New. (SET_TYPE_STRUCTURAL_EQUALITY): New. (struct tree_type): Added "canonical" field. * params.h (VERIFY_CANONICAL_TYPES): New. * doc/c-tree.texi (TYPE_CANONICAL): Document. (TYPE_STRUCTURAL_EQUALITY_P): Document. (SET_TYPE_STRUCTURAL_EQUALITY): Document. * doc/invoke.texi (verify-canonical-types): Document --param parameter for verifying canonical types. 2007-01-02 Joseph Myers * config.gcc (powerpc-*-eabispe*, powerpc-*-eabisimaltivec*, powerpc-*-eabisim*, powerpc-*-eabialtivec*, powerpc-*-eabi*, powerpc-*-rtems*, powerpc-wrs-vxworks, powerpc-wrs-vxworksae, powerpcle-*-eabisim*, powerpcle-*-eabi*): Add rs6000/e500.h to tm_file. * config/rs6000/e500.h: New. * config/rs6000/eabi.h (TARGET_SPE_ABI, TARGET_SPE, TARGET_E500, TARGET_ISEL, TARGET_FPRS, TARGET_E500_SINGLE, TARGET_E500_DOUBLE): Remove. * config/rs6000/linuxspe.h (TARGET_SPE_ABI, TARGET_SPE, TARGET_E500, TARGET_ISEL, TARGET_FPRS, TARGET_E500_SINGLE, TARGET_E500_DOUBLE): Remove. * config/rs6000/vxworks.h (TARGET_SPE_ABI, TARGET_SPE, TARGET_E500, TARGET_ISEL, TARGET_FPRS): Remove. * config/rs6000/rs6000.h (CHECK_E500_OPTIONS): Define. * config/rs6000/rs6000.c (rs6000_override_options): Use CHECK_E500_OPTIONS. 2007-01-02 Joseph Myers * config/rs6000/rs6000.c (print_operand): Check (TARGET_SPE || TARGET_E500_DOUBLE), not TARGET_E500, for %y. (rs6000_generate_compare, rs6000_emit_sCOND, output_cbranch, rs6000_emit_cmove): Don't check TARGET_E500. * config/rs6000/rs6000.md (bunordered, bordered, sunordered, sordered): Don't check TARGET_E500. 2007-01-01 Eric Christopher * config/mips/mips.c (mips_regno_mode_ok_for_base_p): Use HARD_REGISTER_NUM_P. 2007-01-01 Roger Sayle * fold-const.c (fold_binary) : Fold "(X^C1) eq/ne C2" into "X eq/ne (C1^C2)". Fold "(X^Z) eq/ne (Y^Z)" as "X eq/ne Y" when Z has no side-effects. Fold "(X^C1) eq/ne (Y^C2)" as "(X^(C1^C2)) eq/ne Y". 2007-01-01 Mike Stump * configure.ac: Remove support for building with Apple's gcc-3.1. 2007-01-02 Joseph Myers PR middle-end/30311 * caller-save.c (add_stored_regs): Only handle SUBREGs if inner REG is a hard register. Do not modify REG before calling subreg_nregs. * rtlanal.c (subreg_get_info): Don't assert size of XMODE is a multiple of the size of YMODE for certain lowpart cases. 2007-01-01 Andrew Pinski PR middle-end/30253 * gimplify (voidify_wrapper_expr): Update for GIMPLE_MODIFY_STMT. 2007-01-01 Andreas Schwab PR target/29166 * config/ia64/ia64.c (ia64_compute_frame_size): Account space for save of BR0 in extra_spill_size instead of spill_size. (ia64_expand_prologue): Save BR0 outside of the gr/br/fr spill area. (ia64_expand_epilogue): Restore BR0 from its new location. 2007-01-01 Andrew Pinski * gimplify.c (gimplify_init_constructor ): Use a temporary variable if the left hand side is not a gimple register. 2007-01-01 Andrew Pinski * gimplify.c (gimplify_return_expr): Make the temporary variable for the return expression, a gimple register variable. 2007-01-01 Jan Hubicka * emit-rtl.c (emit_copy_of_insn_after): Do not call copy_insn_1 for INSN_LIST. 2007-01-01 Mike Stump * configure.ac (HAVE_GAS_LITERAL16): Add autoconf check for .literal16. * config/darwin.c (machopic_select_rtx_section): Use HAVE_GAS_LITERAL16. (darwin_mergeable_constant_section): Likewise. * configure: Regenerate. * config.in: Regenerate. 2007-01-01 Jan Hubicka Andrew Pinski * cgraphunit.c (cgraph_optimize): Call cgraph_add_new_functions before starting IPA passes.