libstdc++-v3/Makefile.in

   1 # Makefile.in generated by automake 1.9.3 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004  Free Software Foundation, Inc.
   6 # This Makefile.in is free software; the Free Software Foundation
   7 # gives unlimited permission to copy and/or distribute it,
   8 # with or without modifications, as long as this notice is preserved.
   9
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  13 # PARTICULAR PURPOSE.
  14
  15 @SET_MAKE@
  16 srcdir = @srcdir@
  17 top_srcdir = @top_srcdir@
  18 VPATH = @srcdir@
  19 pkgdatadir = $(datadir)/@PACKAGE@
  20 pkglibdir = $(libdir)/@PACKAGE@
  21 pkgincludedir = $(includedir)/@PACKAGE@
  22 top_builddir = .
  23 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  24 INSTALL = @INSTALL@
  25 install_sh_DATA = $(install_sh) -c -m 644
  26 install_sh_PROGRAM = $(install_sh) -c
  27 install_sh_SCRIPT = $(install_sh) -c
  28 INSTALL_HEADER = $(INSTALL_DATA)
  29 transform = $(program_transform_name)
  30 NORMAL_INSTALL = :
  31 PRE_INSTALL = :
  32 POST_INSTALL = :
  33 NORMAL_UNINSTALL = :
  34 PRE_UNINSTALL = :
  35 POST_UNINSTALL = :
  36 build_triplet = @build@
  37 host_triplet = @host@
  38 target_triplet = @target@
  39 DIST_COMMON = README $(am__configure_deps) $(srcdir)/../config.guess \
  40         $(srcdir)/../config.sub $(srcdir)/../install-sh \
  41         $(srcdir)/../ltmain.sh $(srcdir)/../missing \
  42         $(srcdir)/../mkinstalldirs $(srcdir)/Makefile.am \
  43         $(srcdir)/Makefile.in $(srcdir)/config.h.in \
  44         $(top_srcdir)/configure $(top_srcdir)/fragment.am \
  45         $(top_srcdir)/scripts/check_survey.in \
  46         $(top_srcdir)/scripts/testsuite_flags.in ChangeLog acconfig.h
  47 subdir = .
  48 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  49 am__aclocal_m4_deps = $(top_srcdir)/../config/no-executables.m4 \
  50         $(top_srcdir)/../libtool.m4 $(top_srcdir)/crossconfig.m4 \
  51         $(top_srcdir)/linkage.m4 $(top_srcdir)/acinclude.m4 \
  52         $(top_srcdir)/configure.ac
  53 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  54         $(ACLOCAL_M4)
  55 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
  56  configure.lineno configure.status.lineno
  57 CONFIG_HEADER = config.h
  58 CONFIG_CLEAN_FILES = scripts/check_survey scripts/testsuite_flags
  59 depcomp =
  60 am__depfiles_maybe =
  61 SOURCES =
  62 DIST_SOURCES =
  63 MULTISRCTOP =
  64 MULTIBUILDTOP =
  65 MULTIDIRS =
  66 MULTISUBDIR =
  67 MULTIDO = true
  68 MULTICLEAN = true
  69 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
  70         html-recursive info-recursive install-data-recursive \
  71         install-exec-recursive install-info-recursive \
  72         install-recursive installcheck-recursive installdirs-recursive \
  73         pdf-recursive ps-recursive uninstall-info-recursive \
  74         uninstall-recursive
  75 ETAGS = etags
  76 CTAGS = ctags
  77 DIST_SUBDIRS = include libsupc++ libmath src po testsuite
  78 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
  79 distdir = $(PACKAGE)-$(VERSION)
  80 top_distdir = $(distdir)
  81 am__remove_distdir = \
  82   { test ! -d $(distdir) \
  83     || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
  84          && rm -fr $(distdir); }; }
  85 DIST_ARCHIVES = $(distdir).tar.gz
  86 GZIP_ENV = --best
  87 distuninstallcheck_listfiles = find . -type f -print
  88 distcleancheck_listfiles = find . -type f -print
  89 ABI_TWEAKS_SRCDIR = @ABI_TWEAKS_SRCDIR@
  90 ACLOCAL = @ACLOCAL@
  91 ALLOCATOR_H = @ALLOCATOR_H@
  92 ALLOCATOR_NAME = @ALLOCATOR_NAME@
  93 AMTAR = @AMTAR@
  94 AR = @AR@
  95 AS = @AS@
  96 ATOMICITY_SRCDIR = @ATOMICITY_SRCDIR@
  97 ATOMIC_WORD_SRCDIR = @ATOMIC_WORD_SRCDIR@
  98 AUTOCONF = @AUTOCONF@
  99 AUTOHEADER = @AUTOHEADER@
 100 AUTOMAKE = @AUTOMAKE@
 101 AWK = @AWK@
 102 BASIC_FILE_CC = @BASIC_FILE_CC@
 103 BASIC_FILE_H = @BASIC_FILE_H@
 104 CC = @CC@
 105 CCODECVT_CC = @CCODECVT_CC@
 106 CCOLLATE_CC = @CCOLLATE_CC@
 107 CCTYPE_CC = @CCTYPE_CC@
 108 CFLAGS = @CFLAGS@
 109 CLOCALE_CC = @CLOCALE_CC@
 110 CLOCALE_H = @CLOCALE_H@
 111 CLOCALE_INTERNAL_H = @CLOCALE_INTERNAL_H@
 112 CMESSAGES_CC = @CMESSAGES_CC@
 113 CMESSAGES_H = @CMESSAGES_H@
 114 CMONEY_CC = @CMONEY_CC@
 115 CNUMERIC_CC = @CNUMERIC_CC@
 116 CPP = @CPP@
 117 CPPFLAGS = @CPPFLAGS@
 118 CSTDIO_H = @CSTDIO_H@
 119 CTIME_CC = @CTIME_CC@
 120 CTIME_H = @CTIME_H@
 121 CXX = @CXX@
 122 CXXCPP = @CXXCPP@
 123 CXXFLAGS = @CXXFLAGS@
 124 CYGPATH_W = @CYGPATH_W@
 125 C_INCLUDE_DIR = @C_INCLUDE_DIR@
 126 DEBUG_FLAGS = @DEBUG_FLAGS@
 127 DEFS = @DEFS@
 128 ECHO_C = @ECHO_C@
 129 ECHO_N = @ECHO_N@
 130 ECHO_T = @ECHO_T@
 131 EGREP = @EGREP@
 132 EXEEXT = @EXEEXT@
 133 EXTRA_CXX_FLAGS = @EXTRA_CXX_FLAGS@
 134 GLIBCXX_BUILD_DEBUG_FALSE = @GLIBCXX_BUILD_DEBUG_FALSE@
 135 GLIBCXX_BUILD_DEBUG_TRUE = @GLIBCXX_BUILD_DEBUG_TRUE@
 136 GLIBCXX_BUILD_PCH_FALSE = @GLIBCXX_BUILD_PCH_FALSE@
 137 GLIBCXX_BUILD_PCH_TRUE = @GLIBCXX_BUILD_PCH_TRUE@
 138 GLIBCXX_BUILD_VERSIONED_SHLIB_FALSE = @GLIBCXX_BUILD_VERSIONED_SHLIB_FALSE@
 139 GLIBCXX_BUILD_VERSIONED_SHLIB_TRUE = @GLIBCXX_BUILD_VERSIONED_SHLIB_TRUE@
 140 GLIBCXX_C_HEADERS_COMPATIBILITY_FALSE = @GLIBCXX_C_HEADERS_COMPATIBILITY_FALSE@
 141 GLIBCXX_C_HEADERS_COMPATIBILITY_TRUE = @GLIBCXX_C_HEADERS_COMPATIBILITY_TRUE@
 142 GLIBCXX_C_HEADERS_C_FALSE = @GLIBCXX_C_HEADERS_C_FALSE@
 143 GLIBCXX_C_HEADERS_C_STD_FALSE = @GLIBCXX_C_HEADERS_C_STD_FALSE@
 144 GLIBCXX_C_HEADERS_C_STD_TRUE = @GLIBCXX_C_HEADERS_C_STD_TRUE@
 145 GLIBCXX_C_HEADERS_C_TRUE = @GLIBCXX_C_HEADERS_C_TRUE@
 146 GLIBCXX_HOSTED_FALSE = @GLIBCXX_HOSTED_FALSE@
 147 GLIBCXX_HOSTED_TRUE = @GLIBCXX_HOSTED_TRUE@
 148 GLIBCXX_INCLUDES = @GLIBCXX_INCLUDES@
 149 GLIBCXX_TEST_ABI_FALSE = @GLIBCXX_TEST_ABI_FALSE@
 150 GLIBCXX_TEST_ABI_TRUE = @GLIBCXX_TEST_ABI_TRUE@
 151 GLIBCXX_TEST_THREAD_FALSE = @GLIBCXX_TEST_THREAD_FALSE@
 152 GLIBCXX_TEST_THREAD_TRUE = @GLIBCXX_TEST_THREAD_TRUE@
 153 GLIBCXX_TEST_WCHAR_T_FALSE = @GLIBCXX_TEST_WCHAR_T_FALSE@
 154 GLIBCXX_TEST_WCHAR_T_TRUE = @GLIBCXX_TEST_WCHAR_T_TRUE@
 155 INSTALL_DATA = @INSTALL_DATA@
 156 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 157 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 158 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 159 LIBICONV = @LIBICONV@
 160 LIBMATHOBJS = @LIBMATHOBJS@
 161 LIBOBJS = @LIBOBJS@
 162 LIBS = @LIBS@
 163 LIBSUPCXX_PICFLAGS = @LIBSUPCXX_PICFLAGS@
 164 LIBTOOL = @LIBTOOL@
 165 LN_S = @LN_S@
 166 LTLIBOBJS = @LTLIBOBJS@
 167 MAINT = @MAINT@
 168 MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
 169 MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
 170 MAKEINFO = @MAKEINFO@
 171 OBJEXT = @OBJEXT@
 172 OPTIMIZE_CXXFLAGS = @OPTIMIZE_CXXFLAGS@
 173 OPT_LDFLAGS = @OPT_LDFLAGS@
 174 OS_INC_SRCDIR = @OS_INC_SRCDIR@
 175 PACKAGE = @PACKAGE@
 176 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 177 PACKAGE_NAME = @PACKAGE_NAME@
 178 PACKAGE_STRING = @PACKAGE_STRING@
 179 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 180 PACKAGE_VERSION = @PACKAGE_VERSION@
 181 PATH_SEPARATOR = @PATH_SEPARATOR@
 182 RANLIB = @RANLIB@
 183 SECTION_FLAGS = @SECTION_FLAGS@
 184 SECTION_LDFLAGS = @SECTION_LDFLAGS@
 185 SET_MAKE = @SET_MAKE@
 186 SHELL = @SHELL@
 187 STRIP = @STRIP@
 188 SYMVER_MAP = @SYMVER_MAP@
 189 TOPLEVEL_INCLUDES = @TOPLEVEL_INCLUDES@
 190 USE_NLS = @USE_NLS@
 191 VERSION = @VERSION@
 192 WARN_FLAGS = @WARN_FLAGS@
 193 WERROR = @WERROR@
 194 ac_ct_AR = @ac_ct_AR@
 195 ac_ct_AS = @ac_ct_AS@
 196 ac_ct_CC = @ac_ct_CC@
 197 ac_ct_CXX = @ac_ct_CXX@
 198 ac_ct_RANLIB = @ac_ct_RANLIB@
 199 ac_ct_STRIP = @ac_ct_STRIP@
 200 am__leading_dot = @am__leading_dot@
 201 am__tar = @am__tar@
 202 am__untar = @am__untar@
 203 baseline_dir = @baseline_dir@
 204 bindir = @bindir@
 205 build = @build@
 206 build_alias = @build_alias@
 207 build_cpu = @build_cpu@
 208 build_os = @build_os@
 209 build_vendor = @build_vendor@
 210 check_msgfmt = @check_msgfmt@
 211 datadir = @datadir@
 212 enable_shared = @enable_shared@
 213 enable_static = @enable_static@
 214 exec_prefix = @exec_prefix@
 215 glibcxx_MOFILES = @glibcxx_MOFILES@
 216 glibcxx_PCHFLAGS = @glibcxx_PCHFLAGS@
 217 glibcxx_POFILES = @glibcxx_POFILES@
 218 glibcxx_builddir = @glibcxx_builddir@
 219 glibcxx_localedir = @glibcxx_localedir@
 220 glibcxx_prefixdir = @glibcxx_prefixdir@
 221 glibcxx_srcdir = @glibcxx_srcdir@
 222 glibcxx_thread_h = @glibcxx_thread_h@
 223 glibcxx_toolexecdir = @glibcxx_toolexecdir@
 224 glibcxx_toolexeclibdir = @glibcxx_toolexeclibdir@
 225 gxx_include_dir = @gxx_include_dir@
 226 host = @host@
 227 host_alias = @host_alias@
 228 host_cpu = @host_cpu@
 229 host_os = @host_os@
 230 host_vendor = @host_vendor@
 231 includedir = @includedir@
 232 infodir = @infodir@
 233 install_sh = @install_sh@
 234 libdir = @libdir@
 235 libexecdir = @libexecdir@
 236 libtool_VERSION = @libtool_VERSION@
 237 localstatedir = @localstatedir@
 238 mandir = @mandir@
 239 mkdir_p = @mkdir_p@
 240 multi_basedir = @multi_basedir@
 241 oldincludedir = @oldincludedir@
 242 port_specific_symbol_files = @port_specific_symbol_files@
 243 prefix = @prefix@
 244 program_transform_name = @program_transform_name@
 245 sbindir = @sbindir@
 246 sharedstatedir = @sharedstatedir@
 247 sysconfdir = @sysconfdir@
 248 target = @target@
 249 target_alias = @target_alias@
 250 target_cpu = @target_cpu@
 251 target_os = @target_os@
 252 target_vendor = @target_vendor@
 253 toplevel_srcdir = @toplevel_srcdir@
 254
 255 # May be used by various substitution variables.
 256 gcc_version := $(shell cat $(top_srcdir)/../gcc/BASE-VER)
 257 MAINT_CHARSET = latin1
 258 mkinstalldirs = $(SHELL) $(toplevel_srcdir)/mkinstalldirs
 259 PWD_COMMAND = $${PWDCMD-pwd}
 260 STAMP = echo timestamp >
 261 toolexecdir = $(glibcxx_toolexecdir)
 262 toolexeclibdir = $(glibcxx_toolexeclibdir)
 263
 264 # These bits are all figured out from configure.  Look in acinclude.m4
 265 # or configure.ac to see how they are set.  See GLIBCXX_EXPORT_FLAGS.
 266 CONFIG_CXXFLAGS = \
 267         $(SECTION_FLAGS) $(EXTRA_CXX_FLAGS)
 268
 269 WARN_CXXFLAGS = \
 270         $(WARN_FLAGS) $(WERROR) -fdiagnostics-show-location=once
 271
 272
 273 # -I/-D flags to pass when compiling.
 274 AM_CPPFLAGS = $(GLIBCXX_INCLUDES)
 275 @GLIBCXX_HOSTED_TRUE@hosted_source = libmath src po testsuite
 276 SUBDIRS = include libsupc++ $(hosted_source)
 277 ACLOCAL_AMFLAGS = -I . -I .. -I ../config
 278
 279 # Multilib support.
 280 MAKEOVERRIDES =
 281
 282 # Work around what appears to be a GNU make bug handling MAKEFLAGS
 283 # values defined in terms of make variables, as is the case for CC and
 284 # friends when we are called from the top level Makefile.
 285 AM_MAKEFLAGS = \
 286         "AR_FLAGS=$(AR_FLAGS)" \
 287         "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
 288         "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
 289         "CFLAGS=$(CFLAGS)" \
 290         "CXXFLAGS=$(CXXFLAGS)" \
 291         "CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \
 292         "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
 293         "INSTALL=$(INSTALL)" \
 294         "INSTALL_DATA=$(INSTALL_DATA)" \
 295         "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
 296         "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
 297         "LDFLAGS=$(LDFLAGS)" \
 298         "LIBCFLAGS=$(LIBCFLAGS)" \
 299         "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
 300         "MAKE=$(MAKE)" \
 301         "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
 302         "PICFLAG=$(PICFLAG)" \
 303         "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
 304         "SHELL=$(SHELL)" \
 305         "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
 306         "exec_prefix=$(exec_prefix)" \
 307         "infodir=$(infodir)" \
 308         "libdir=$(libdir)" \
 309         "includedir=$(includedir)" \
 310         "prefix=$(prefix)" \
 311         "tooldir=$(tooldir)" \
 312         "gxx_include_dir=$(gxx_include_dir)" \
 313         "AR=$(AR)" \
 314         "AS=$(AS)" \
 315         "LD=$(LD)" \
 316         "RANLIB=$(RANLIB)" \
 317         "NM=$(NM)" \
 318         "NM_FOR_BUILD=$(NM_FOR_BUILD)" \
 319         "NM_FOR_TARGET=$(NM_FOR_TARGET)" \
 320         "DESTDIR=$(DESTDIR)" \
 321         "WERROR=$(WERROR)"
 322
 323
 324 # Subdir rules rely on $(FLAGS_TO_PASS)
 325 FLAGS_TO_PASS = $(AM_MAKEFLAGS)
 326 all: config.h
 327         $(MAKE) $(AM_MAKEFLAGS) all-recursive
 328
 329 .SUFFIXES:
 330 am--refresh:
 331         @:
 332 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/fragment.am $(am__configure_deps)
 333         @for dep in $?; do \
 334           case '$(am__configure_deps)' in \
 335             *$$dep*) \
 336               echo ' cd $(srcdir) && $(AUTOMAKE) --foreign  --ignore-deps'; \
 337               cd $(srcdir) && $(AUTOMAKE) --foreign  --ignore-deps \
 338                 && exit 0; \
 339               exit 1;; \
 340           esac; \
 341         done; \
 342         echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  --ignore-deps Makefile'; \
 343         cd $(top_srcdir) && \
 344           $(AUTOMAKE) --foreign  --ignore-deps Makefile
 345 .PRECIOUS: Makefile
 346 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 347         @case '$?' in \
 348           *config.status*) \
 349             echo ' $(SHELL) ./config.status'; \
 350             $(SHELL) ./config.status;; \
 351           *) \
 352             echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
 353             cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
 354         esac;
 355
 356 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 357         $(SHELL) ./config.status --recheck
 358
 359 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 360         cd $(srcdir) && $(AUTOCONF)
 361 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 362         cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
 363
 364 config.h: stamp-h1
 365         @if test ! -f $@; then \
 366           rm -f stamp-h1; \
 367           $(MAKE) stamp-h1; \
 368         else :; fi
 369
 370 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
 371         @rm -f stamp-h1
 372         cd $(top_builddir) && $(SHELL) ./config.status config.h
 373 $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) $(top_srcdir)/acconfig.h
 374         cd $(top_srcdir) && $(AUTOHEADER)
 375         rm -f stamp-h1
 376         touch $@
 377
 378 distclean-hdr:
 379         -rm -f config.h stamp-h1
 380 scripts/check_survey: $(top_builddir)/config.status $(top_srcdir)/scripts/check_survey.in
 381         cd $(top_builddir) && $(SHELL) ./config.status $@
 382 scripts/testsuite_flags: $(top_builddir)/config.status $(top_srcdir)/scripts/testsuite_flags.in
 383         cd $(top_builddir) && $(SHELL) ./config.status $@
 384
 385 mostlyclean-libtool:
 386         -rm -f *.lo
 387
 388 clean-libtool:
 389         -rm -rf .libs _libs
 390
 391 distclean-libtool:
 392         -rm -f libtool
 393
 394 # GNU Make needs to see an explicit $(MAKE) variable in the command it
 395 # runs to enable its job server during parallel builds.  Hence the
 396 # comments below.
 397 all-multi:
 398         $(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do # $(MAKE)
 399 install-multi:
 400         $(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do # $(MAKE)
 401
 402 mostlyclean-multi:
 403         $(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean # $(MAKE)
 404 clean-multi:
 405         $(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean # $(MAKE)
 406 distclean-multi:
 407         $(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean # $(MAKE)
 408 maintainer-clean-multi:
 409         $(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean # $(MAKE)
 410 uninstall-info-am:
 411
 412 # This directory's subdirectories are mostly independent; you can cd
 413 # into them and run `make' without going through this Makefile.
 414 # To change the values of `make' variables: instead of editing Makefiles,
 415 # (1) if the variable is set in `config.status', edit `config.status'
 416 #     (which will cause the Makefiles to be regenerated when you run `make');
 417 # (2) otherwise, pass the desired values on the `make' command line.
 418 $(RECURSIVE_TARGETS):
 419         @set fnord $$MAKEFLAGS; amf=$$2; \
 420         dot_seen=no; \
 421         target=`echo $@ | sed s/-recursive//`; \
 422         list='$(SUBDIRS)'; for subdir in $$list; do \
 423           echo "Making $$target in $$subdir"; \
 424           if test "$$subdir" = "."; then \
 425             dot_seen=yes; \
 426             local_target="$$target-am"; \
 427           else \
 428             local_target="$$target"; \
 429           fi; \
 430           (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 431            || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
 432         done; \
 433         if test "$$dot_seen" = "no"; then \
 434           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 435         fi; test -z "$$fail"
 436
 437 mostlyclean-recursive clean-recursive distclean-recursive \
 438 maintainer-clean-recursive:
 439         @set fnord $$MAKEFLAGS; amf=$$2; \
 440         dot_seen=no; \
 441         case "$@" in \
 442           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 443           *) list='$(SUBDIRS)' ;; \
 444         esac; \
 445         rev=''; for subdir in $$list; do \
 446           if test "$$subdir" = "."; then :; else \
 447             rev="$$subdir $$rev"; \
 448           fi; \
 449         done; \
 450         rev="$$rev ."; \
 451         target=`echo $@ | sed s/-recursive//`; \
 452         for subdir in $$rev; do \
 453           echo "Making $$target in $$subdir"; \
 454           if test "$$subdir" = "."; then \
 455             local_target="$$target-am"; \
 456           else \
 457             local_target="$$target"; \
 458           fi; \
 459           (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 460            || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
 461         done && test -z "$$fail"
 462 tags-recursive:
 463         list='$(SUBDIRS)'; for subdir in $$list; do \
 464           test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 465         done
 466 ctags-recursive:
 467         list='$(SUBDIRS)'; for subdir in $$list; do \
 468           test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 469         done
 470
 471 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 472         list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 473         unique=`for i in $$list; do \
 474             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 475           done | \
 476           $(AWK) '    { files[$$0] = 1; } \
 477                END { for (i in files) print i; }'`; \
 478         mkid -fID $$unique
 479 tags: TAGS
 480 ctags: CTAGS
 481 CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 482                 $(TAGS_FILES) $(LISP)
 483         tags=; \
 484         here=`pwd`; \
 485         list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
 486         unique=`for i in $$list; do \
 487             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 488           done | \
 489           $(AWK) '    { files[$$0] = 1; } \
 490                END { for (i in files) print i; }'`; \
 491         test -z "$(CTAGS_ARGS)$$tags$$unique" \
 492           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 493              $$tags $$unique
 494
 495 GTAGS:
 496         here=`$(am__cd) $(top_builddir) && pwd` \
 497           && cd $(top_srcdir) \
 498           && gtags -i $(GTAGS_ARGS) $$here
 499
 500 distclean-tags:
 501         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 502
 503 distdir: $(DISTFILES)
 504         $(am__remove_distdir)
 505         mkdir $(distdir)
 506         $(mkdir_p) $(distdir)/.. $(distdir)/../config $(distdir)/scripts
 507         @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
 508         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
 509         list='$(DISTFILES)'; for file in $$list; do \
 510           case $$file in \
 511             $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
 512             $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
 513           esac; \
 514           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 515           dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
 516           if test "$$dir" != "$$file" && test "$$dir" != "."; then \
 517             dir="/$$dir"; \
 518             $(mkdir_p) "$(distdir)$$dir"; \
 519           else \
 520             dir=''; \
 521           fi; \
 522           if test -d $$d/$$file; then \
 523             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 524               cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
 525             fi; \
 526             cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
 527           else \
 528             test -f $(distdir)/$$file \
 529             || cp -p $$d/$$file $(distdir)/$$file \
 530             || exit 1; \
 531           fi; \
 532         done
 533         list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 534           if test "$$subdir" = .; then :; else \
 535             test -d "$(distdir)/$$subdir" \
 536             || $(mkdir_p) "$(distdir)/$$subdir" \
 537             || exit 1; \
 538             distdir=`$(am__cd) $(distdir) && pwd`; \
 539             top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
 540             (cd $$subdir && \
 541               $(MAKE) $(AM_MAKEFLAGS) \
 542                 top_distdir="$$top_distdir" \
 543                 distdir="$$distdir/$$subdir" \
 544                 distdir) \
 545               || exit 1; \
 546           fi; \
 547         done
 548         -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
 549           ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 550           ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
 551           ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
 552         || chmod -R a+r $(distdir)
 553 dist-gzip: distdir
 554         tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
 555         $(am__remove_distdir)
 556
 557 dist-bzip2: distdir
 558         tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
 559         $(am__remove_distdir)
 560
 561 dist-tarZ: distdir
 562         tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
 563         $(am__remove_distdir)
 564
 565 dist-shar: distdir
 566         shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
 567         $(am__remove_distdir)
 568
 569 dist-zip: distdir
 570         -rm -f $(distdir).zip
 571         zip -rq $(distdir).zip $(distdir)
 572         $(am__remove_distdir)
 573
 574 dist dist-all: distdir
 575         tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
 576         $(am__remove_distdir)
 577
 578 # This target untars the dist file and tries a VPATH configuration.  Then
 579 # it guarantees that the distribution is self-contained by making another
 580 # tarfile.
 581 distcheck: dist
 582         case '$(DIST_ARCHIVES)' in \
 583         *.tar.gz*) \
 584           GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
 585         *.tar.bz2*) \
 586           bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
 587         *.tar.Z*) \
 588           uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 589         *.shar.gz*) \
 590           GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
 591         *.zip*) \
 592           unzip $(distdir).zip ;;\
 593         esac
 594         chmod -R a-w $(distdir); chmod a+w $(distdir)
 595         mkdir $(distdir)/_build
 596         mkdir $(distdir)/_inst
 597         chmod a-w $(distdir)
 598         dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 599           && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
 600           && cd $(distdir)/_build \
 601           && ../configure --srcdir=.. --prefix="$$dc_install_base" \
 602             $(DISTCHECK_CONFIGURE_FLAGS) \
 603           && $(MAKE) $(AM_MAKEFLAGS) \
 604           && $(MAKE) $(AM_MAKEFLAGS) dvi \
 605           && $(MAKE) $(AM_MAKEFLAGS) check \
 606           && $(MAKE) $(AM_MAKEFLAGS) install \
 607           && $(MAKE) $(AM_MAKEFLAGS) installcheck \
 608           && $(MAKE) $(AM_MAKEFLAGS) uninstall \
 609           && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
 610                 distuninstallcheck \
 611           && chmod -R a-w "$$dc_install_base" \
 612           && ({ \
 613                (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
 614                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
 615                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
 616                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
 617                     distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
 618               } || { rm -rf "$$dc_destdir"; exit 1; }) \
 619           && rm -rf "$$dc_destdir" \
 620           && $(MAKE) $(AM_MAKEFLAGS) dist \
 621           && rm -rf $(DIST_ARCHIVES) \
 622           && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
 623         $(am__remove_distdir)
 624         @(echo "$(distdir) archives ready for distribution: "; \
 625           list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
 626           sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
 627 distuninstallcheck:
 628         @cd $(distuninstallcheck_dir) \
 629         && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
 630            || { echo "ERROR: files left after uninstall:" ; \
 631                 if test -n "$(DESTDIR)"; then \
 632                   echo "  (check DESTDIR support)"; \
 633                 fi ; \
 634                 $(distuninstallcheck_listfiles) ; \
 635                 exit 1; } >&2
 636 distcleancheck: distclean
 637         @if test '$(srcdir)' = . ; then \
 638           echo "ERROR: distcleancheck can only run from a VPATH build" ; \
 639           exit 1 ; \
 640         fi
 641         @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
 642           || { echo "ERROR: files left in build directory after distclean:" ; \
 643                $(distcleancheck_listfiles) ; \
 644                exit 1; } >&2
 645 check-am: all-am
 646 check: check-recursive
 647 all-am: Makefile all-multi config.h
 648 installdirs: installdirs-recursive
 649 installdirs-am:
 650 install: install-recursive
 651 install-exec: install-exec-recursive
 652 install-data: install-data-recursive
 653 uninstall: uninstall-recursive
 654
 655 install-am: all-am
 656         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 657
 658 installcheck: installcheck-recursive
 659 install-strip:
 660         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 661           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 662           `test -z '$(STRIP)' || \
 663             echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 664 mostlyclean-generic:
 665
 666 clean-generic:
 667
 668 distclean-generic:
 669         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 670
 671 maintainer-clean-generic:
 672         @echo "This command is intended for maintainers to use"
 673         @echo "it deletes files that may require special tools to rebuild."
 674 clean: clean-multi clean-recursive
 675
 676 clean-am: clean-generic clean-libtool mostlyclean-am
 677
 678 distclean: distclean-multi distclean-recursive
 679         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
 680         -rm -f Makefile
 681 distclean-am: clean-am distclean-generic distclean-hdr \
 682         distclean-libtool distclean-tags
 683
 684 dvi: dvi-recursive
 685
 686 dvi-am:
 687
 688 html: html-recursive
 689
 690 info: info-recursive
 691
 692 info-am:
 693
 694 install-data-am:
 695
 696 install-exec-am: install-multi
 697
 698 install-info: install-info-recursive
 699
 700 install-man:
 701
 702 installcheck-am:
 703
 704 maintainer-clean: maintainer-clean-multi maintainer-clean-recursive
 705         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
 706         -rm -rf $(top_srcdir)/autom4te.cache
 707         -rm -f Makefile
 708 maintainer-clean-am: distclean-am maintainer-clean-generic
 709
 710 mostlyclean: mostlyclean-multi mostlyclean-recursive
 711
 712 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
 713
 714 pdf: pdf-recursive
 715
 716 pdf-am:
 717
 718 ps: ps-recursive
 719
 720 ps-am:
 721
 722 uninstall-am: uninstall-info-am
 723
 724 uninstall-info: uninstall-info-recursive
 725
 726 .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am all-multi \
 727         am--refresh check check-am clean clean-generic clean-libtool \
 728         clean-multi clean-recursive ctags ctags-recursive dist \
 729         dist-all dist-bzip2 dist-gzip dist-shar dist-tarZ dist-zip \
 730         distcheck distclean distclean-generic distclean-hdr \
 731         distclean-libtool distclean-multi distclean-recursive \
 732         distclean-tags distcleancheck distdir distuninstallcheck dvi \
 733         dvi-am html html-am info info-am install install-am \
 734         install-data install-data-am install-exec install-exec-am \
 735         install-info install-info-am install-man install-multi \
 736         install-strip installcheck installcheck-am installdirs \
 737         installdirs-am maintainer-clean maintainer-clean-generic \
 738         maintainer-clean-multi maintainer-clean-recursive mostlyclean \
 739         mostlyclean-generic mostlyclean-libtool mostlyclean-multi \
 740         mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \
 741         uninstall uninstall-am uninstall-info-am
 742
 743
 744 # These rules are messy, but are hella worth it.
 745 doxygen:
 746         -(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
 747           builddir=`${PWD_COMMAND}`; \
 748           ${SHELL} ${srcdir}/docs/doxygen/run_doxygen \
 749                     --host_alias=${host_alias} \
 750                     --mode=user $${srcdir} $${builddir})
 751
 752 doxygen-maint:
 753         -(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
 754           builddir=`${PWD_COMMAND}`; \
 755           ${SHELL} ${srcdir}/docs/doxygen/run_doxygen \
 756                     --host_alias=${host_alias} \
 757                     --mode=maint $${srcdir} $${builddir})
 758
 759 doxygen-man:
 760         -(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
 761           builddir=`${PWD_COMMAND}`; \
 762           ${SHELL} ${srcdir}/docs/doxygen/run_doxygen \
 763                     --host_alias=${host_alias} \
 764                     --mode=man $${srcdir} $${builddir})
 765
 766 .PHONY: doxygen doxygen-maint doxygen-man
 767
 768 # Handy forwarding targets.
 769 check-%:
 770         cd testsuite && $(MAKE) $@
 771
 772 # All the machinations with string instantiations messes up the
 773 # automake-generated TAGS rule. Make a simple one here.
 774 TAGS: tags-recursive $(LISP)
 775 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 776 # Otherwise a system limit (for SysV at least) may be exceeded.
 777 .NOEXPORT: