libitm/Makefile.in

   1 # Makefile.in generated by automake 1.11.1 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
   6 # Inc.
   7 # This Makefile.in is free software; the Free Software Foundation
   8 # gives unlimited permission to copy and/or distribute it,
   9 # with or without modifications, as long as this notice is preserved.
  10
  11 # This program is distributed in the hope that it will be useful,
  12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  14 # PARTICULAR PURPOSE.
  15
  16 @SET_MAKE@
  17
  18
  19 VPATH = @srcdir@
  20 pkgdatadir = $(datadir)/@PACKAGE@
  21 pkgincludedir = $(includedir)/@PACKAGE@
  22 pkglibdir = $(libdir)/@PACKAGE@
  23 pkglibexecdir = $(libexecdir)/@PACKAGE@
  24 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  25 install_sh_DATA = $(install_sh) -c -m 644
  26 install_sh_PROGRAM = $(install_sh) -c
  27 install_sh_SCRIPT = $(install_sh) -c
  28 INSTALL_HEADER = $(INSTALL_DATA)
  29 transform = $(program_transform_name)
  30 NORMAL_INSTALL = :
  31 PRE_INSTALL = :
  32 POST_INSTALL = :
  33 NORMAL_UNINSTALL = :
  34 PRE_UNINSTALL = :
  35 POST_UNINSTALL = :
  36 build_triplet = @build@
  37 host_triplet = @host@
  38 target_triplet = @target@
  39 @ARCH_ARM_TRUE@am__append_1 = hwcap.cc
  40 @ARCH_X86_TRUE@am__append_2 = x86_sse.cc x86_avx.cc
  41 @ARCH_FUTEX_TRUE@am__append_3 = futex.cc
  42 subdir = .
  43 DIST_COMMON = ChangeLog $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
  44         $(top_srcdir)/configure $(am__configure_deps) \
  45         $(srcdir)/config.h.in $(srcdir)/../mkinstalldirs \
  46         $(srcdir)/libitm.spec.in $(srcdir)/../depcomp
  47 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  48 am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
  49         $(top_srcdir)/../config/asmcfi.m4 \
  50         $(top_srcdir)/../config/depstand.m4 \
  51         $(top_srcdir)/../config/enable.m4 \
  52         $(top_srcdir)/../config/futex.m4 \
  53         $(top_srcdir)/../config/lead-dot.m4 \
  54         $(top_srcdir)/../config/mmap.m4 \
  55         $(top_srcdir)/../config/multi.m4 \
  56         $(top_srcdir)/../config/override.m4 \
  57         $(top_srcdir)/../config/stdint.m4 \
  58         $(top_srcdir)/../config/tls.m4 \
  59         $(top_srcdir)/../config/weakref.m4 \
  60         $(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \
  61         $(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \
  62         $(top_srcdir)/acinclude.m4 $(top_srcdir)/../libtool.m4 \
  63         $(top_srcdir)/configure.ac
  64 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  65         $(ACLOCAL_M4)
  66 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
  67  configure.lineno config.status.lineno
  68 mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
  69 CONFIG_HEADER = config.h
  70 CONFIG_CLEAN_FILES = libitm.spec
  71 CONFIG_CLEAN_VPATH_FILES =
  72 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
  73 am__vpath_adj = case $$p in \
  74     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
  75     *) f=$$p;; \
  76   esac;
  77 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
  78 am__install_max = 40
  79 am__nobase_strip_setup = \
  80   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
  81 am__nobase_strip = \
  82   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
  83 am__nobase_list = $(am__nobase_strip_setup); \
  84   for p in $$list; do echo "$$p $$p"; done | \
  85   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  86   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
  87     if (++n[$$2] == $(am__install_max)) \
  88       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
  89     END { for (dir in files) print dir, files[dir] }'
  90 am__base_list = \
  91   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  92   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
  93 am__installdirs = "$(DESTDIR)$(toolexeclibdir)" "$(DESTDIR)$(infodir)" \
  94         "$(DESTDIR)$(toolexeclibdir)"
  95 LTLIBRARIES = $(toolexeclib_LTLIBRARIES)
  96 libitm_la_LIBADD =
  97 @ARCH_ARM_TRUE@am__objects_1 = hwcap.lo
  98 @ARCH_X86_TRUE@am__objects_2 = x86_sse.lo x86_avx.lo
  99 @ARCH_FUTEX_TRUE@am__objects_3 = futex.lo
 100 am_libitm_la_OBJECTS = aatree.lo alloc.lo alloc_c.lo alloc_cpp.lo \
 101         barrier.lo beginend.lo clone.lo eh_cpp.lo local.lo query.lo \
 102         retry.lo rwlock.lo useraction.lo util.lo sjlj.lo tls.lo \
 103         method-serial.lo method-gl.lo method-ml.lo $(am__objects_1) \
 104         $(am__objects_2) $(am__objects_3)
 105 libitm_la_OBJECTS = $(am_libitm_la_OBJECTS)
 106 DEFAULT_INCLUDES = -I.@am__isrc@
 107 depcomp = $(SHELL) $(top_srcdir)/../depcomp
 108 am__depfiles_maybe = depfiles
 109 am__mv = mv -f
 110 CPPASCOMPILE = $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 111         $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS)
 112 LTCPPASCOMPILE = $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 113         --mode=compile $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 114         $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS)
 115 CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 116         $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
 117 LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 118         --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 119         $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
 120 CXXLD = $(CXX)
 121 CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 122         --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \
 123         $(LDFLAGS) -o $@
 124 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 125         $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 126 LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 127         --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 128         $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 129 CCLD = $(CC)
 130 LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 131         --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
 132         $(LDFLAGS) -o $@
 133 SOURCES = $(libitm_la_SOURCES)
 134 MULTISRCTOP =
 135 MULTIBUILDTOP =
 136 MULTIDIRS =
 137 MULTISUBDIR =
 138 MULTIDO = true
 139 MULTICLEAN = true
 140 INFO_DEPS = libitm.info
 141 am__TEXINFO_TEX_DIR = $(srcdir)/../gcc/doc/include
 142 DVIS = libitm.dvi
 143 PDFS = libitm.pdf
 144 PSS = libitm.ps
 145 HTMLS = libitm.html
 146 TEXINFOS = libitm.texi
 147 TEXI2DVI = texi2dvi
 148 TEXI2PDF = $(TEXI2DVI) --pdf --batch
 149 MAKEINFOHTML = $(MAKEINFO) --html
 150 AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
 151 DVIPS = dvips
 152 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
 153         html-recursive info-recursive install-data-recursive \
 154         install-dvi-recursive install-exec-recursive \
 155         install-html-recursive install-info-recursive \
 156         install-pdf-recursive install-ps-recursive install-recursive \
 157         installcheck-recursive installdirs-recursive pdf-recursive \
 158         ps-recursive uninstall-recursive
 159 HEADERS = $(nodist_toolexeclib_HEADERS)
 160 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
 161   distclean-recursive maintainer-clean-recursive
 162 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
 163         $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS
 164 ETAGS = etags
 165 CTAGS = ctags
 166 DIST_SUBDIRS = $(SUBDIRS)
 167 ACLOCAL = @ACLOCAL@
 168 AMTAR = @AMTAR@
 169 AR = @AR@
 170 AUTOCONF = @AUTOCONF@
 171 AUTOHEADER = @AUTOHEADER@
 172 AUTOMAKE = @AUTOMAKE@
 173 AWK = @AWK@
 174 CC = @CC@
 175 CCAS = @CCAS@
 176 CCASDEPMODE = @CCASDEPMODE@
 177 CCASFLAGS = @CCASFLAGS@
 178 CCDEPMODE = @CCDEPMODE@
 179 CFLAGS = @CFLAGS@
 180 CPP = @CPP@
 181 CPPFLAGS = @CPPFLAGS@
 182 CXX = @CXX@
 183 CXXCPP = @CXXCPP@
 184 CXXDEPMODE = @CXXDEPMODE@
 185 CXXFLAGS = @CXXFLAGS@
 186 CYGPATH_W = @CYGPATH_W@
 187 DEFS = @DEFS@
 188 DEPDIR = @DEPDIR@
 189 DSYMUTIL = @DSYMUTIL@
 190 DUMPBIN = @DUMPBIN@
 191 ECHO_C = @ECHO_C@
 192 ECHO_N = @ECHO_N@
 193 ECHO_T = @ECHO_T@
 194 EGREP = @EGREP@
 195 EXEEXT = @EXEEXT@
 196 FGREP = @FGREP@
 197 GREP = @GREP@
 198 HWCAP_LDFLAGS = @HWCAP_LDFLAGS@
 199 INSTALL = @INSTALL@
 200 INSTALL_DATA = @INSTALL_DATA@
 201 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 202 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 203 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 204 LD = @LD@
 205 LDFLAGS = @LDFLAGS@
 206 LIBOBJS = @LIBOBJS@
 207 LIBS = @LIBS@
 208 LIBTOOL = @LIBTOOL@
 209 LIPO = @LIPO@
 210 LN_S = @LN_S@
 211 LTLIBOBJS = @LTLIBOBJS@
 212 MAINT = @MAINT@
 213 MAKEINFO = @MAKEINFO@
 214 MKDIR_P = @MKDIR_P@
 215 NM = @NM@
 216 NMEDIT = @NMEDIT@
 217 OBJDUMP = @OBJDUMP@
 218 OBJEXT = @OBJEXT@
 219 OPT_LDFLAGS = @OPT_LDFLAGS@
 220 OTOOL = @OTOOL@
 221 OTOOL64 = @OTOOL64@
 222 PACKAGE = @PACKAGE@
 223 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 224 PACKAGE_NAME = @PACKAGE_NAME@
 225 PACKAGE_STRING = @PACKAGE_STRING@
 226 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 227 PACKAGE_URL = @PACKAGE_URL@
 228 PACKAGE_VERSION = @PACKAGE_VERSION@
 229 PATH_SEPARATOR = @PATH_SEPARATOR@
 230 PERL = @PERL@
 231 RANLIB = @RANLIB@
 232 SECTION_LDFLAGS = @SECTION_LDFLAGS@
 233 SED = @SED@
 234 SET_MAKE = @SET_MAKE@
 235 SHELL = @SHELL@
 236 STRIP = @STRIP@
 237 VERSION = @VERSION@
 238 XCFLAGS = @XCFLAGS@
 239 XLDFLAGS = @XLDFLAGS@
 240 abs_builddir = @abs_builddir@
 241 abs_srcdir = @abs_srcdir@
 242 abs_top_builddir = @abs_top_builddir@
 243 abs_top_srcdir = @abs_top_srcdir@
 244 ac_ct_CC = @ac_ct_CC@
 245 ac_ct_CXX = @ac_ct_CXX@
 246 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 247 am__include = @am__include@
 248 am__leading_dot = @am__leading_dot@
 249 am__quote = @am__quote@
 250 am__tar = @am__tar@
 251 am__untar = @am__untar@
 252 bindir = @bindir@
 253 build = @build@
 254 build_alias = @build_alias@
 255 build_cpu = @build_cpu@
 256 build_os = @build_os@
 257 build_vendor = @build_vendor@
 258 builddir = @builddir@
 259 config_path = @config_path@
 260 datadir = @datadir@
 261 datarootdir = @datarootdir@
 262 docdir = @docdir@
 263 dvidir = @dvidir@
 264 enable_shared = @enable_shared@
 265 enable_static = @enable_static@
 266 exec_prefix = @exec_prefix@
 267 host = @host@
 268 host_alias = @host_alias@
 269 host_cpu = @host_cpu@
 270 host_os = @host_os@
 271 host_vendor = @host_vendor@
 272 htmldir = @htmldir@
 273 includedir = @includedir@
 274 infodir = @infodir@
 275 install_sh = @install_sh@
 276 libdir = @libdir@
 277 libexecdir = @libexecdir@
 278 libtool_VERSION = @libtool_VERSION@
 279 link_itm = @link_itm@
 280 localedir = @localedir@
 281 localstatedir = @localstatedir@
 282 mandir = @mandir@
 283 mkdir_p = @mkdir_p@
 284 multi_basedir = @multi_basedir@
 285 oldincludedir = @oldincludedir@
 286 pdfdir = @pdfdir@
 287 prefix = @prefix@
 288 program_transform_name = @program_transform_name@
 289 psdir = @psdir@
 290 sbindir = @sbindir@
 291 sharedstatedir = @sharedstatedir@
 292 srcdir = @srcdir@
 293 sysconfdir = @sysconfdir@
 294 target = @target@
 295 target_alias = @target_alias@
 296 target_cpu = @target_cpu@
 297 target_os = @target_os@
 298 target_vendor = @target_vendor@
 299 toolexecdir = @toolexecdir@
 300 toolexeclibdir = @toolexeclibdir@
 301 top_build_prefix = @top_build_prefix@
 302 top_builddir = @top_builddir@
 303 top_srcdir = @top_srcdir@
 304 ACLOCAL_AMFLAGS = -I .. -I ../config
 305 SUBDIRS = testsuite
 306 gcc_version := $(shell cat $(top_srcdir)/../gcc/BASE-VER)
 307 abi_version = -fabi-version=4
 308 search_path = $(addprefix $(top_srcdir)/config/, $(config_path)) $(top_srcdir)
 309 fincludedir = $(libdir)/gcc/$(target_alias)/$(gcc_version)/finclude
 310 libsubincludedir = $(libdir)/gcc/$(target_alias)/$(gcc_version)/include
 311 AM_CPPFLAGS = $(addprefix -I, $(search_path))
 312 AM_CFLAGS = $(XCFLAGS)
 313 AM_CXXFLAGS = $(XCFLAGS) -std=gnu++0x -funwind-tables -fno-exceptions \
 314         -fno-rtti $(abi_version)
 315
 316 AM_CCASFLAGS = $(XCFLAGS)
 317 AM_LDFLAGS = $(XLDFLAGS) $(SECTION_LDFLAGS) $(OPT_LDFLAGS) $(HWCAP_LDFLAGS)
 318 toolexeclib_LTLIBRARIES = libitm.la
 319 nodist_toolexeclib_HEADERS = libitm.spec
 320 @LIBITM_BUILD_VERSIONED_SHLIB_FALSE@libitm_version_script =
 321 @LIBITM_BUILD_VERSIONED_SHLIB_GNU_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@libitm_version_script = -Wl,--version-script,$(top_srcdir)/libitm.map
 322 @LIBITM_BUILD_VERSIONED_SHLIB_SUN_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@libitm_version_script = -Wl,-M,libitm.map-sun
 323 @LIBITM_BUILD_VERSIONED_SHLIB_FALSE@libitm_version_dep =
 324 @LIBITM_BUILD_VERSIONED_SHLIB_GNU_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@libitm_version_dep = $(top_srcdir)/libitm.map
 325 @LIBITM_BUILD_VERSIONED_SHLIB_SUN_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@libitm_version_dep = libitm.map-sun
 326 libitm_version_info = -version-info $(libtool_VERSION)
 327
 328 # Force link with C, not C++.  For now, while we're using C++ we don't
 329 # want or need libstdc++.
 330 libitm_la_DEPENDENCIES = $(libitm_version_dep)
 331 libitm_la_LINK = $(LINK) $(libitm_la_LDFLAGS)
 332 libitm_la_LDFLAGS = $(libitm_version_info) $(libitm_version_script)
 333 libitm_la_SOURCES = aatree.cc alloc.cc alloc_c.cc alloc_cpp.cc \
 334         barrier.cc beginend.cc clone.cc eh_cpp.cc local.cc query.cc \
 335         retry.cc rwlock.cc useraction.cc util.cc sjlj.S tls.cc \
 336         method-serial.cc method-gl.cc method-ml.cc $(am__append_1) \
 337         $(am__append_2) $(am__append_3)
 338
 339 # Automake Documentation:
 340 # If your package has Texinfo files in many directories, you can use the
 341 # variable TEXINFO_TEX to tell Automake where to find the canonical
 342 # `texinfo.tex' for your package. The value of this variable should be
 343 # the relative path from the current `Makefile.am' to `texinfo.tex'.
 344 TEXINFO_TEX = ../gcc/doc/include/texinfo.tex
 345
 346 # Defines info, dvi, pdf and html targets
 347 MAKEINFOFLAGS = -I $(srcdir)/../gcc/doc/include
 348 info_TEXINFOS = libitm.texi
 349 @GENINSRC_FALSE@STAMP_GENINSRC =
 350
 351 # AM_CONDITIONAL on configure option --generated-files-in-srcdir
 352 @GENINSRC_TRUE@STAMP_GENINSRC = stamp-geninsrc
 353 @BUILD_INFO_FALSE@STAMP_BUILD_INFO =
 354
 355 # AM_CONDITIONAL on configure check ACX_CHECK_PROG_VER([MAKEINFO])
 356 @BUILD_INFO_TRUE@STAMP_BUILD_INFO = stamp-build-info
 357 CLEANFILES = $(STAMP_GENINSRC) $(STAMP_BUILD_INFO) libitm.info
 358 MAINTAINERCLEANFILES = $(srcdir)/libitm.info
 359 all: config.h
 360         $(MAKE) $(AM_MAKEFLAGS) all-recursive
 361
 362 .SUFFIXES:
 363 .SUFFIXES: .S .cc .dvi .lo .o .obj .ps
 364 am--refresh:
 365         @:
 366 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 367         @for dep in $?; do \
 368           case '$(am__configure_deps)' in \
 369             *$$dep*) \
 370               echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
 371               $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
 372                 && exit 0; \
 373               exit 1;; \
 374           esac; \
 375         done; \
 376         echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
 377         $(am__cd) $(top_srcdir) && \
 378           $(AUTOMAKE) --foreign Makefile
 379 .PRECIOUS: Makefile
 380 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 381         @case '$?' in \
 382           *config.status*) \
 383             echo ' $(SHELL) ./config.status'; \
 384             $(SHELL) ./config.status;; \
 385           *) \
 386             echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
 387             cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
 388         esac;
 389
 390 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 391         $(SHELL) ./config.status --recheck
 392
 393 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 394         $(am__cd) $(srcdir) && $(AUTOCONF)
 395 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 396         $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
 397 $(am__aclocal_m4_deps):
 398
 399 config.h: stamp-h1
 400         @if test ! -f $@; then \
 401           rm -f stamp-h1; \
 402           $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
 403         else :; fi
 404
 405 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
 406         @rm -f stamp-h1
 407         cd $(top_builddir) && $(SHELL) ./config.status config.h
 408 $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 409         ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
 410         rm -f stamp-h1
 411         touch $@
 412
 413 distclean-hdr:
 414         -rm -f config.h stamp-h1
 415 libitm.spec: $(top_builddir)/config.status $(srcdir)/libitm.spec.in
 416         cd $(top_builddir) && $(SHELL) ./config.status $@
 417 install-toolexeclibLTLIBRARIES: $(toolexeclib_LTLIBRARIES)
 418         @$(NORMAL_INSTALL)
 419         test -z "$(toolexeclibdir)" || $(MKDIR_P) "$(DESTDIR)$(toolexeclibdir)"
 420         @list='$(toolexeclib_LTLIBRARIES)'; test -n "$(toolexeclibdir)" || list=; \
 421         list2=; for p in $$list; do \
 422           if test -f $$p; then \
 423             list2="$$list2 $$p"; \
 424           else :; fi; \
 425         done; \
 426         test -z "$$list2" || { \
 427           echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(toolexeclibdir)'"; \
 428           $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(toolexeclibdir)"; \
 429         }
 430
 431 uninstall-toolexeclibLTLIBRARIES:
 432         @$(NORMAL_UNINSTALL)
 433         @list='$(toolexeclib_LTLIBRARIES)'; test -n "$(toolexeclibdir)" || list=; \
 434         for p in $$list; do \
 435           $(am__strip_dir) \
 436           echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(toolexeclibdir)/$$f'"; \
 437           $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(toolexeclibdir)/$$f"; \
 438         done
 439
 440 clean-toolexeclibLTLIBRARIES:
 441         -test -z "$(toolexeclib_LTLIBRARIES)" || rm -f $(toolexeclib_LTLIBRARIES)
 442         @list='$(toolexeclib_LTLIBRARIES)'; for p in $$list; do \
 443           dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
 444           test "$$dir" != "$$p" || dir=.; \
 445           echo "rm -f \"$${dir}/so_locations\""; \
 446           rm -f "$${dir}/so_locations"; \
 447         done
 448 libitm.la: $(libitm_la_OBJECTS) $(libitm_la_DEPENDENCIES)
 449         $(libitm_la_LINK) -rpath $(toolexeclibdir) $(libitm_la_OBJECTS) $(libitm_la_LIBADD) $(LIBS)
 450
 451 mostlyclean-compile:
 452         -rm -f *.$(OBJEXT)
 453
 454 distclean-compile:
 455         -rm -f *.tab.c
 456
 457 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aatree.Plo@am__quote@
 458 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alloc.Plo@am__quote@
 459 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alloc_c.Plo@am__quote@
 460 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alloc_cpp.Plo@am__quote@
 461 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/barrier.Plo@am__quote@
 462 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/beginend.Plo@am__quote@
 463 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/clone.Plo@am__quote@
 464 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eh_cpp.Plo@am__quote@
 465 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/futex.Plo@am__quote@
 466 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hwcap.Plo@am__quote@
 467 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/local.Plo@am__quote@
 468 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/method-gl.Plo@am__quote@
 469 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/method-ml.Plo@am__quote@
 470 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/method-serial.Plo@am__quote@
 471 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/query.Plo@am__quote@
 472 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/retry.Plo@am__quote@
 473 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rwlock.Plo@am__quote@
 474 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sjlj.Plo@am__quote@
 475 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tls.Plo@am__quote@
 476 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/useraction.Plo@am__quote@
 477 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/util.Plo@am__quote@
 478 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/x86_avx.Plo@am__quote@
 479 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/x86_sse.Plo@am__quote@
 480
 481 .S.o:
 482 @am__fastdepCCAS_TRUE@  $(CPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
 483 @am__fastdepCCAS_TRUE@  $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 484 @AMDEP_TRUE@@am__fastdepCCAS_FALSE@     source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 485 @AMDEP_TRUE@@am__fastdepCCAS_FALSE@     DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 486 @am__fastdepCCAS_FALSE@ $(CPPASCOMPILE) -c -o $@ $<
 487
 488 .S.obj:
 489 @am__fastdepCCAS_TRUE@  $(CPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
 490 @am__fastdepCCAS_TRUE@  $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 491 @AMDEP_TRUE@@am__fastdepCCAS_FALSE@     source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 492 @AMDEP_TRUE@@am__fastdepCCAS_FALSE@     DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 493 @am__fastdepCCAS_FALSE@ $(CPPASCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 494
 495 .S.lo:
 496 @am__fastdepCCAS_TRUE@  $(LTCPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
 497 @am__fastdepCCAS_TRUE@  $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 498 @AMDEP_TRUE@@am__fastdepCCAS_FALSE@     source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 499 @AMDEP_TRUE@@am__fastdepCCAS_FALSE@     DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 500 @am__fastdepCCAS_FALSE@ $(LTCPPASCOMPILE) -c -o $@ $<
 501
 502 .cc.o:
 503 @am__fastdepCXX_TRUE@   $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
 504 @am__fastdepCXX_TRUE@   $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 505 @AMDEP_TRUE@@am__fastdepCXX_FALSE@      source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 506 @AMDEP_TRUE@@am__fastdepCXX_FALSE@      DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 507 @am__fastdepCXX_FALSE@  $(CXXCOMPILE) -c -o $@ $<
 508
 509 .cc.obj:
 510 @am__fastdepCXX_TRUE@   $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
 511 @am__fastdepCXX_TRUE@   $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 512 @AMDEP_TRUE@@am__fastdepCXX_FALSE@      source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 513 @AMDEP_TRUE@@am__fastdepCXX_FALSE@      DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 514 @am__fastdepCXX_FALSE@  $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 515
 516 .cc.lo:
 517 @am__fastdepCXX_TRUE@   $(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
 518 @am__fastdepCXX_TRUE@   $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 519 @AMDEP_TRUE@@am__fastdepCXX_FALSE@      source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 520 @AMDEP_TRUE@@am__fastdepCXX_FALSE@      DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 521 @am__fastdepCXX_FALSE@  $(LTCXXCOMPILE) -c -o $@ $<
 522
 523 mostlyclean-libtool:
 524         -rm -f *.lo
 525
 526 clean-libtool:
 527         -rm -rf .libs _libs
 528
 529 distclean-libtool:
 530         -rm -f libtool config.lt
 531
 532 # GNU Make needs to see an explicit $(MAKE) variable in the command it
 533 # runs to enable its job server during parallel builds.  Hence the
 534 # comments below.
 535 all-multi:
 536         $(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do # $(MAKE)
 537 install-multi:
 538         $(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do # $(MAKE)
 539
 540 mostlyclean-multi:
 541         $(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean # $(MAKE)
 542 clean-multi:
 543         $(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean # $(MAKE)
 544 distclean-multi:
 545         $(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean # $(MAKE)
 546 maintainer-clean-multi:
 547         $(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean # $(MAKE)
 548
 549 libitm.dvi: libitm.texi
 550         TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
 551         MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
 552         $(TEXI2DVI) -o $@ `test -f 'libitm.texi' || echo '$(srcdir)/'`libitm.texi
 553
 554 libitm.pdf: libitm.texi
 555         TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
 556         MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
 557         $(TEXI2PDF) -o $@ `test -f 'libitm.texi' || echo '$(srcdir)/'`libitm.texi
 558
 559 libitm.html: libitm.texi
 560         rm -rf $(@:.html=.htp)
 561         if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
 562          -o $(@:.html=.htp) `test -f 'libitm.texi' || echo '$(srcdir)/'`libitm.texi; \
 563         then \
 564           rm -rf $@; \
 565           if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
 566             mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
 567         else \
 568           if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
 569             rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
 570           exit 1; \
 571         fi
 572 .dvi.ps:
 573         TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
 574         $(DVIPS) -o $@ $<
 575
 576 uninstall-dvi-am:
 577         @$(NORMAL_UNINSTALL)
 578         @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
 579         for p in $$list; do \
 580           $(am__strip_dir) \
 581           echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
 582           rm -f "$(DESTDIR)$(dvidir)/$$f"; \
 583         done
 584
 585 uninstall-html-am:
 586         @$(NORMAL_UNINSTALL)
 587         @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
 588         for p in $$list; do \
 589           $(am__strip_dir) \
 590           echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
 591           rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
 592         done
 593
 594 uninstall-info-am:
 595         @$(PRE_UNINSTALL)
 596         @if test -d '$(DESTDIR)$(infodir)' && \
 597             (install-info --version && \
 598              install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
 599           list='$(INFO_DEPS)'; \
 600           for file in $$list; do \
 601             relfile=`echo "$$file" | sed 's|^.*/||'`; \
 602             echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
 603             if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
 604             then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
 605           done; \
 606         else :; fi
 607         @$(NORMAL_UNINSTALL)
 608         @list='$(INFO_DEPS)'; \
 609         for file in $$list; do \
 610           relfile=`echo "$$file" | sed 's|^.*/||'`; \
 611           relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
 612           (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
 613              echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
 614              rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
 615            else :; fi); \
 616         done
 617
 618 uninstall-pdf-am:
 619         @$(NORMAL_UNINSTALL)
 620         @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
 621         for p in $$list; do \
 622           $(am__strip_dir) \
 623           echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
 624           rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
 625         done
 626
 627 uninstall-ps-am:
 628         @$(NORMAL_UNINSTALL)
 629         @list='$(PSS)'; test -n "$(psdir)" || list=; \
 630         for p in $$list; do \
 631           $(am__strip_dir) \
 632           echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
 633           rm -f "$(DESTDIR)$(psdir)/$$f"; \
 634         done
 635
 636 dist-info: $(INFO_DEPS)
 637         @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
 638         list='$(INFO_DEPS)'; \
 639         for base in $$list; do \
 640           case $$base in \
 641             $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
 642           esac; \
 643           if test -f $$base; then d=.; else d=$(srcdir); fi; \
 644           base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
 645           for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
 646             if test -f $$file; then \
 647               relfile=`expr "$$file" : "$$d/\(.*\)"`; \
 648               test -f "$(distdir)/$$relfile" || \
 649                 cp -p $$file "$(distdir)/$$relfile"; \
 650             else :; fi; \
 651           done; \
 652         done
 653
 654 mostlyclean-aminfo:
 655         -rm -rf libitm.aux libitm.cp libitm.cps libitm.fn libitm.fns libitm.ky \
 656           libitm.kys libitm.log libitm.pg libitm.pgs libitm.tmp \
 657           libitm.toc libitm.tp libitm.tps libitm.vr libitm.vrs
 658
 659 clean-aminfo:
 660         -test -z "libitm.dvi libitm.pdf libitm.ps libitm.html" \
 661         || rm -rf libitm.dvi libitm.pdf libitm.ps libitm.html
 662
 663 maintainer-clean-aminfo:
 664         @list='$(INFO_DEPS)'; for i in $$list; do \
 665           i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
 666           echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
 667           rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
 668         done
 669 install-nodist_toolexeclibHEADERS: $(nodist_toolexeclib_HEADERS)
 670         @$(NORMAL_INSTALL)
 671         test -z "$(toolexeclibdir)" || $(MKDIR_P) "$(DESTDIR)$(toolexeclibdir)"
 672         @list='$(nodist_toolexeclib_HEADERS)'; test -n "$(toolexeclibdir)" || list=; \
 673         for p in $$list; do \
 674           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 675           echo "$$d$$p"; \
 676         done | $(am__base_list) | \
 677         while read files; do \
 678           echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(toolexeclibdir)'"; \
 679           $(INSTALL_HEADER) $$files "$(DESTDIR)$(toolexeclibdir)" || exit $$?; \
 680         done
 681
 682 uninstall-nodist_toolexeclibHEADERS:
 683         @$(NORMAL_UNINSTALL)
 684         @list='$(nodist_toolexeclib_HEADERS)'; test -n "$(toolexeclibdir)" || list=; \
 685         files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
 686         test -n "$$files" || exit 0; \
 687         echo " ( cd '$(DESTDIR)$(toolexeclibdir)' && rm -f" $$files ")"; \
 688         cd "$(DESTDIR)$(toolexeclibdir)" && rm -f $$files
 689
 690 # This directory's subdirectories are mostly independent; you can cd
 691 # into them and run `make' without going through this Makefile.
 692 # To change the values of `make' variables: instead of editing Makefiles,
 693 # (1) if the variable is set in `config.status', edit `config.status'
 694 #     (which will cause the Makefiles to be regenerated when you run `make');
 695 # (2) otherwise, pass the desired values on the `make' command line.
 696 $(RECURSIVE_TARGETS):
 697         @fail= failcom='exit 1'; \
 698         for f in x $$MAKEFLAGS; do \
 699           case $$f in \
 700             *=* | --[!k]*);; \
 701             *k*) failcom='fail=yes';; \
 702           esac; \
 703         done; \
 704         dot_seen=no; \
 705         target=`echo $@ | sed s/-recursive//`; \
 706         list='$(SUBDIRS)'; for subdir in $$list; do \
 707           echo "Making $$target in $$subdir"; \
 708           if test "$$subdir" = "."; then \
 709             dot_seen=yes; \
 710             local_target="$$target-am"; \
 711           else \
 712             local_target="$$target"; \
 713           fi; \
 714           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 715           || eval $$failcom; \
 716         done; \
 717         if test "$$dot_seen" = "no"; then \
 718           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 719         fi; test -z "$$fail"
 720
 721 $(RECURSIVE_CLEAN_TARGETS):
 722         @fail= failcom='exit 1'; \
 723         for f in x $$MAKEFLAGS; do \
 724           case $$f in \
 725             *=* | --[!k]*);; \
 726             *k*) failcom='fail=yes';; \
 727           esac; \
 728         done; \
 729         dot_seen=no; \
 730         case "$@" in \
 731           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 732           *) list='$(SUBDIRS)' ;; \
 733         esac; \
 734         rev=''; for subdir in $$list; do \
 735           if test "$$subdir" = "."; then :; else \
 736             rev="$$subdir $$rev"; \
 737           fi; \
 738         done; \
 739         rev="$$rev ."; \
 740         target=`echo $@ | sed s/-recursive//`; \
 741         for subdir in $$rev; do \
 742           echo "Making $$target in $$subdir"; \
 743           if test "$$subdir" = "."; then \
 744             local_target="$$target-am"; \
 745           else \
 746             local_target="$$target"; \
 747           fi; \
 748           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 749           || eval $$failcom; \
 750         done && test -z "$$fail"
 751 tags-recursive:
 752         list='$(SUBDIRS)'; for subdir in $$list; do \
 753           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 754         done
 755 ctags-recursive:
 756         list='$(SUBDIRS)'; for subdir in $$list; do \
 757           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 758         done
 759
 760 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 761         list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 762         unique=`for i in $$list; do \
 763             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 764           done | \
 765           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 766               END { if (nonempty) { for (i in files) print i; }; }'`; \
 767         mkid -fID $$unique
 768 tags: TAGS
 769
 770 TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 771                 $(TAGS_FILES) $(LISP)
 772         set x; \
 773         here=`pwd`; \
 774         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 775           include_option=--etags-include; \
 776           empty_fix=.; \
 777         else \
 778           include_option=--include; \
 779           empty_fix=; \
 780         fi; \
 781         list='$(SUBDIRS)'; for subdir in $$list; do \
 782           if test "$$subdir" = .; then :; else \
 783             test ! -f $$subdir/TAGS || \
 784               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 785           fi; \
 786         done; \
 787         list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
 788         unique=`for i in $$list; do \
 789             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 790           done | \
 791           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 792               END { if (nonempty) { for (i in files) print i; }; }'`; \
 793         shift; \
 794         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 795           test -n "$$unique" || unique=$$empty_fix; \
 796           if test $$# -gt 0; then \
 797             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 798               "$$@" $$unique; \
 799           else \
 800             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 801               $$unique; \
 802           fi; \
 803         fi
 804 ctags: CTAGS
 805 CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 806                 $(TAGS_FILES) $(LISP)
 807         list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
 808         unique=`for i in $$list; do \
 809             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 810           done | \
 811           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 812               END { if (nonempty) { for (i in files) print i; }; }'`; \
 813         test -z "$(CTAGS_ARGS)$$unique" \
 814           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 815              $$unique
 816
 817 GTAGS:
 818         here=`$(am__cd) $(top_builddir) && pwd` \
 819           && $(am__cd) $(top_srcdir) \
 820           && gtags -i $(GTAGS_ARGS) "$$here"
 821
 822 distclean-tags:
 823         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 824 check-am: all-am
 825 check: check-recursive
 826 all-am: Makefile $(INFO_DEPS) $(LTLIBRARIES) all-multi $(HEADERS) \
 827                 config.h all-local
 828 installdirs: installdirs-recursive
 829 installdirs-am:
 830         for dir in "$(DESTDIR)$(toolexeclibdir)" "$(DESTDIR)$(infodir)" "$(DESTDIR)$(toolexeclibdir)"; do \
 831           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 832         done
 833 install: install-recursive
 834 install-exec: install-exec-recursive
 835 install-data: install-data-recursive
 836 uninstall: uninstall-recursive
 837
 838 install-am: all-am
 839         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 840
 841 installcheck: installcheck-recursive
 842 install-strip:
 843         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 844           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 845           `test -z '$(STRIP)' || \
 846             echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 847 mostlyclean-generic:
 848
 849 clean-generic:
 850         -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
 851
 852 distclean-generic:
 853         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 854         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 855
 856 maintainer-clean-generic:
 857         @echo "This command is intended for maintainers to use"
 858         @echo "it deletes files that may require special tools to rebuild."
 859         -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
 860 clean: clean-multi clean-recursive
 861
 862 clean-am: clean-aminfo clean-generic clean-libtool \
 863         clean-toolexeclibLTLIBRARIES mostlyclean-am
 864
 865 distclean: distclean-multi distclean-recursive
 866         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
 867         -rm -rf ./$(DEPDIR)
 868         -rm -f Makefile
 869 distclean-am: clean-am distclean-compile distclean-generic \
 870         distclean-hdr distclean-libtool distclean-tags
 871
 872 dvi: dvi-recursive
 873
 874 dvi-am: $(DVIS)
 875
 876 html: html-recursive
 877
 878 html-am: $(HTMLS)
 879
 880 info: info-recursive
 881
 882 info-am: $(INFO_DEPS)
 883
 884 install-data-am: install-info-am
 885
 886 install-dvi: install-dvi-recursive
 887
 888 install-dvi-am: $(DVIS)
 889         @$(NORMAL_INSTALL)
 890         test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)"
 891         @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
 892         for p in $$list; do \
 893           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 894           echo "$$d$$p"; \
 895         done | $(am__base_list) | \
 896         while read files; do \
 897           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
 898           $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
 899         done
 900 install-exec-am: install-multi install-nodist_toolexeclibHEADERS \
 901         install-toolexeclibLTLIBRARIES
 902
 903 install-html: install-html-recursive
 904
 905 install-html-am: $(HTMLS)
 906         @$(NORMAL_INSTALL)
 907         test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
 908         @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
 909         for p in $$list; do \
 910           if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
 911           $(am__strip_dir) \
 912           if test -d "$$d$$p"; then \
 913             echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
 914             $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
 915             echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
 916             $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
 917           else \
 918             list2="$$list2 $$d$$p"; \
 919           fi; \
 920         done; \
 921         test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
 922         while read files; do \
 923           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
 924           $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
 925         done; }
 926 install-info: install-info-recursive
 927
 928 install-info-am: $(INFO_DEPS)
 929         @$(NORMAL_INSTALL)
 930         test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)"
 931         @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
 932         list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
 933         for file in $$list; do \
 934           case $$file in \
 935             $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
 936           esac; \
 937           if test -f $$file; then d=.; else d=$(srcdir); fi; \
 938           file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
 939           for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
 940                        $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
 941             if test -f $$ifile; then \
 942               echo "$$ifile"; \
 943             else : ; fi; \
 944           done; \
 945         done | $(am__base_list) | \
 946         while read files; do \
 947           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
 948           $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
 949         @$(POST_INSTALL)
 950         @if (install-info --version && \
 951              install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
 952           list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
 953           for file in $$list; do \
 954             relfile=`echo "$$file" | sed 's|^.*/||'`; \
 955             echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
 956             install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
 957           done; \
 958         else : ; fi
 959 install-man:
 960
 961 install-pdf: install-pdf-recursive
 962
 963 install-pdf-am: $(PDFS)
 964         @$(NORMAL_INSTALL)
 965         test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
 966         @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
 967         for p in $$list; do \
 968           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 969           echo "$$d$$p"; \
 970         done | $(am__base_list) | \
 971         while read files; do \
 972           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
 973           $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
 974 install-ps: install-ps-recursive
 975
 976 install-ps-am: $(PSS)
 977         @$(NORMAL_INSTALL)
 978         test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)"
 979         @list='$(PSS)'; test -n "$(psdir)" || list=; \
 980         for p in $$list; do \
 981           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 982           echo "$$d$$p"; \
 983         done | $(am__base_list) | \
 984         while read files; do \
 985           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
 986           $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
 987 installcheck-am:
 988
 989 maintainer-clean: maintainer-clean-multi maintainer-clean-recursive
 990         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
 991         -rm -rf $(top_srcdir)/autom4te.cache
 992         -rm -rf ./$(DEPDIR)
 993         -rm -f Makefile
 994 maintainer-clean-am: distclean-am maintainer-clean-aminfo \
 995         maintainer-clean-generic
 996
 997 mostlyclean: mostlyclean-multi mostlyclean-recursive
 998
 999 mostlyclean-am: mostlyclean-aminfo mostlyclean-compile \
1000         mostlyclean-generic mostlyclean-libtool
1001
1002 pdf: pdf-recursive
1003
1004 pdf-am: $(PDFS)
1005
1006 ps: ps-recursive
1007
1008 ps-am: $(PSS)
1009
1010 uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
1011         uninstall-nodist_toolexeclibHEADERS uninstall-pdf-am \
1012         uninstall-ps-am uninstall-toolexeclibLTLIBRARIES
1013
1014 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all all-multi \
1015         clean-multi ctags-recursive distclean-multi install-am \
1016         install-multi install-strip maintainer-clean-multi \
1017         mostlyclean-multi tags-recursive
1018
1019 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
1020         all all-am all-local all-multi am--refresh check check-am \
1021         clean clean-aminfo clean-generic clean-libtool clean-multi \
1022         clean-toolexeclibLTLIBRARIES ctags ctags-recursive dist-info \
1023         distclean distclean-compile distclean-generic distclean-hdr \
1024         distclean-libtool distclean-multi distclean-tags dvi dvi-am \
1025         html html-am info info-am install install-am install-data \
1026         install-data-am install-dvi install-dvi-am install-exec \
1027         install-exec-am install-html install-html-am install-info \
1028         install-info-am install-man install-multi \
1029         install-nodist_toolexeclibHEADERS install-pdf install-pdf-am \
1030         install-ps install-ps-am install-strip \
1031         install-toolexeclibLTLIBRARIES installcheck installcheck-am \
1032         installdirs installdirs-am maintainer-clean \
1033         maintainer-clean-aminfo maintainer-clean-generic \
1034         maintainer-clean-multi mostlyclean mostlyclean-aminfo \
1035         mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
1036         mostlyclean-multi pdf pdf-am ps ps-am tags tags-recursive \
1037         uninstall uninstall-am uninstall-dvi-am uninstall-html-am \
1038         uninstall-info-am uninstall-nodist_toolexeclibHEADERS \
1039         uninstall-pdf-am uninstall-ps-am \
1040         uninstall-toolexeclibLTLIBRARIES
1041
1042
1043 vpath % $(strip $(search_path))
1044 @LIBITM_BUILD_VERSIONED_SHLIB_SUN_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@libitm.map-sun : $(top_srcdir)/libitm.map \
1045 @LIBITM_BUILD_VERSIONED_SHLIB_SUN_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@              $(top_srcdir)/../contrib/make_sunver.pl \
1046 @LIBITM_BUILD_VERSIONED_SHLIB_SUN_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@              $(libitm_la_OBJECTS) $(libitm_la_LIBADD)
1047 @LIBITM_BUILD_VERSIONED_SHLIB_SUN_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@      perl $(top_srcdir)/../contrib/make_sunver.pl \
1048 @LIBITM_BUILD_VERSIONED_SHLIB_SUN_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@        $(top_srcdir)/libitm.map \
1049 @LIBITM_BUILD_VERSIONED_SHLIB_SUN_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@        $(libitm_la_OBJECTS:%.lo=.libs/%.o) \
1050 @LIBITM_BUILD_VERSIONED_SHLIB_SUN_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@       `echo $(libitm_la_LIBADD) | \
1051 @LIBITM_BUILD_VERSIONED_SHLIB_SUN_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@          sed 's,/\([^/.]*\)\.la,/.libs/\1.a,g'` \
1052 @LIBITM_BUILD_VERSIONED_SHLIB_SUN_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@       > $@ || (rm -f $@ ; exit 1)
1053 @ARCH_X86_TRUE@x86_sse.lo : XCFLAGS += -msse
1054 @ARCH_X86_AVX_TRUE@x86_avx.lo : XCFLAGS += -mavx
1055
1056 all-local: $(STAMP_GENINSRC)
1057
1058 stamp-geninsrc: libitm.info
1059         cp -p $(top_builddir)/libitm.info $(srcdir)/libitm.info
1060         @touch $@
1061
1062 libitm.info: $(STAMP_BUILD_INFO)
1063
1064 stamp-build-info: libitm.texi
1065         $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) -o libitm.info $(srcdir)/libitm.texi
1066         @touch $@
1067
1068 # Tell versions [3.59,3.63) of GNU make to not export all variables.
1069 # Otherwise a system limit (for SysV at least) may be exceeded.
1070 .NOEXPORT: