[pf3gnuchains/gcc-fork.git] / gcc / gimplify.c

/* Tree lowering pass.  This pass converts the GENERIC functions-as-trees
   tree representation into the GIMPLE form.
   Copyright (C) 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
   Major work done by Sebastian Pop <s.pop@laposte.net>,
   Diego Novillo <dnovillo@redhat.com> and Jason Merrill <jason@redhat.com>.

This file is part of GCC.

GCC is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free
Software Foundation; either version 2, or (at your option) any later
version.

GCC is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
for more details.

You should have received a copy of the GNU General Public License
along with GCC; see the file COPYING.  If not, write to the Free
Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
02110-1301, USA.  */

#include "config.h"
#include "system.h"
#include "coretypes.h"
#include "tm.h"
#include "tree.h"
#include "rtl.h"
#include "varray.h"
#include "tree-gimple.h"
#include "tree-inline.h"
#include "diagnostic.h"
#include "langhooks.h"
#include "langhooks-def.h"
#include "tree-flow.h"
#include "cgraph.h"
#include "timevar.h"
#include "except.h"
#include "hashtab.h"
#include "flags.h"
#include "real.h"
#include "function.h"
#include "output.h"
#include "expr.h"
#include "ggc.h"
#include "toplev.h"
#include "target.h"

static struct gimplify_ctx
{
  tree current_bind_expr;
  tree temps;
  tree conditional_cleanups;
  tree exit_label;
  tree return_temp;
  VEC(tree,heap) *case_labels;
  /* The formal temporary table.  Should this be persistent?  */
  htab_t temp_htab;
  int conditions;
  bool save_stack;
  bool into_ssa;
} *gimplify_ctxp;


/* Formal (expression) temporary table handling: Multiple occurrences of
   the same scalar expression are evaluated into the same temporary.  */

typedef struct gimple_temp_hash_elt
{
  tree val;   /* Key */
  tree temp;  /* Value */
} elt_t;

/* Forward declarations.  */
static enum gimplify_status gimplify_compound_expr (tree *, tree *, bool);
#ifdef ENABLE_CHECKING
static bool cpt_same_type (tree a, tree b);
#endif


/* Return a hash value for a formal temporary table entry.  */

static hashval_t
gimple_tree_hash (const void *p)
{
  tree t = ((const elt_t *) p)->val;
  return iterative_hash_expr (t, 0);
}

/* Compare two formal temporary table entries.  */

static int
gimple_tree_eq (const void *p1, const void *p2)
{
  tree t1 = ((const elt_t *) p1)->val;
  tree t2 = ((const elt_t *) p2)->val;
  enum tree_code code = TREE_CODE (t1);

  if (TREE_CODE (t2) != code
      || TREE_TYPE (t1) != TREE_TYPE (t2))
    return 0;

  if (!operand_equal_p (t1, t2, 0))
    return 0;

  /* Only allow them to compare equal if they also hash equal; otherwise
     results are nondeterminate, and we fail bootstrap comparison.  */
  gcc_assert (gimple_tree_hash (p1) == gimple_tree_hash (p2));

  return 1;
}

/* Set up a context for the gimplifier.  */

void
push_gimplify_context (void)
{
  gcc_assert (!gimplify_ctxp);
  gimplify_ctxp
    = (struct gimplify_ctx *) xcalloc (1, sizeof (struct gimplify_ctx));
  if (optimize)
    gimplify_ctxp->temp_htab
      = htab_create (1000, gimple_tree_hash, gimple_tree_eq, free);
  else
    gimplify_ctxp->temp_htab = NULL;
}

/* Tear down a context for the gimplifier.  If BODY is non-null, then
   put the temporaries into the outer BIND_EXPR.  Otherwise, put them
   in the unexpanded_var_list.  */

void
pop_gimplify_context (tree body)
{
  tree t;

  gcc_assert (gimplify_ctxp && !gimplify_ctxp->current_bind_expr);

  for (t = gimplify_ctxp->temps; t ; t = TREE_CHAIN (t))
    DECL_GIMPLE_FORMAL_TEMP_P (t) = 0;

  if (body)
    declare_tmp_vars (gimplify_ctxp->temps, body);
  else
    record_vars (gimplify_ctxp->temps);

#if 0
  if (!quiet_flag && optimize)
    fprintf (stderr, " collisions: %f ",
             htab_collisions (gimplify_ctxp->temp_htab));
#endif

  if (optimize)
    htab_delete (gimplify_ctxp->temp_htab);
  free (gimplify_ctxp);
  gimplify_ctxp = NULL;
}

static void
gimple_push_bind_expr (tree bind)
{
  TREE_CHAIN (bind) = gimplify_ctxp->current_bind_expr;
  gimplify_ctxp->current_bind_expr = bind;
}

static void
gimple_pop_bind_expr (void)
{
  gimplify_ctxp->current_bind_expr
    = TREE_CHAIN (gimplify_ctxp->current_bind_expr);
}

tree
gimple_current_bind_expr (void)
{
  return gimplify_ctxp->current_bind_expr;
}

/* Returns true iff there is a COND_EXPR between us and the innermost
   CLEANUP_POINT_EXPR.  This info is used by gimple_push_cleanup.  */

static bool
gimple_conditional_context (void)
{
  return gimplify_ctxp->conditions > 0;
}

/* Note that we've entered a COND_EXPR.  */

static void
gimple_push_condition (void)
{
#ifdef ENABLE_CHECKING
  if (gimplify_ctxp->conditions == 0)
    gcc_assert (!gimplify_ctxp->conditional_cleanups);
#endif
  ++(gimplify_ctxp->conditions);
}

/* Note that we've left a COND_EXPR.  If we're back at unconditional scope
   now, add any conditional cleanups we've seen to the prequeue.  */

static void
gimple_pop_condition (tree *pre_p)
{
  int conds = --(gimplify_ctxp->conditions);

  gcc_assert (conds >= 0);
  if (conds == 0)
    {
      append_to_statement_list (gimplify_ctxp->conditional_cleanups, pre_p);
      gimplify_ctxp->conditional_cleanups = NULL_TREE;
    }
}

/* A subroutine of append_to_statement_list{,_force}.  T is not NULL.  */

static void
append_to_statement_list_1 (tree t, tree *list_p)
{
  tree list = *list_p;
  tree_stmt_iterator i;

  if (!list)
    {
      if (t && TREE_CODE (t) == STATEMENT_LIST)
        {
          *list_p = t;
          return;
        }
      *list_p = list = alloc_stmt_list ();
    }

  i = tsi_last (list);
  tsi_link_after (&i, t, TSI_CONTINUE_LINKING);
}

/* Add T to the end of the list container pointed to by LIST_P.
   If T is an expression with no effects, it is ignored.  */

void
append_to_statement_list (tree t, tree *list_p)
{
  if (t && TREE_SIDE_EFFECTS (t))
    append_to_statement_list_1 (t, list_p);
}

/* Similar, but the statement is always added, regardless of side effects.  */

void
append_to_statement_list_force (tree t, tree *list_p)
{
  if (t != NULL_TREE)
    append_to_statement_list_1 (t, list_p);
}

/* Both gimplify the statement T and append it to LIST_P.  */

void
gimplify_and_add (tree t, tree *list_p)
{
  gimplify_stmt (&t);
  append_to_statement_list (t, list_p);
}

/* Strip off a legitimate source ending from the input string NAME of
   length LEN.  Rather than having to know the names used by all of
   our front ends, we strip off an ending of a period followed by
   up to five characters.  (Java uses ".class".)  */

static inline void
remove_suffix (char *name, int len)
{
  int i;

  for (i = 2;  i < 8 && len > i;  i++)
    {
      if (name[len - i] == '.')
        {
          name[len - i] = '\0';
          break;
        }
    }
}

/* Create a nameless artificial label and put it in the current function
   context.  Returns the newly created label.  */

tree
create_artificial_label (void)
{
  tree lab = build_decl (LABEL_DECL, NULL_TREE, void_type_node);

  DECL_ARTIFICIAL (lab) = 1;
  DECL_IGNORED_P (lab) = 1;
  DECL_CONTEXT (lab) = current_function_decl;
  return lab;
}

/* Create a new temporary name with PREFIX.  Returns an identifier.  */

static GTY(()) unsigned int tmp_var_id_num;

tree
create_tmp_var_name (const char *prefix)
{
  char *tmp_name;

  if (prefix)
    {
      char *preftmp = ASTRDUP (prefix);

      remove_suffix (preftmp, strlen (preftmp));
      prefix = preftmp;
    }

  ASM_FORMAT_PRIVATE_NAME (tmp_name, prefix ? prefix : "T", tmp_var_id_num++);
  return get_identifier (tmp_name);
}


/* Create a new temporary variable declaration of type TYPE.
   Does NOT push it into the current binding.  */

tree
create_tmp_var_raw (tree type, const char *prefix)
{
  tree tmp_var;
  tree new_type;

  /* Make the type of the variable writable.  */
  new_type = build_type_variant (type, 0, 0);
  TYPE_ATTRIBUTES (new_type) = TYPE_ATTRIBUTES (type);

  tmp_var = build_decl (VAR_DECL, prefix ? create_tmp_var_name (prefix) : NULL,
                        type);

  /* The variable was declared by the compiler.  */
  DECL_ARTIFICIAL (tmp_var) = 1;
  /* And we don't want debug info for it.  */
  DECL_IGNORED_P (tmp_var) = 1;

  /* Make the variable writable.  */
  TREE_READONLY (tmp_var) = 0;

  DECL_EXTERNAL (tmp_var) = 0;
  TREE_STATIC (tmp_var) = 0;
  TREE_USED (tmp_var) = 1;

  return tmp_var;
}

/* Create a new temporary variable declaration of type TYPE.  DOES push the
   variable into the current binding.  Further, assume that this is called
   only from gimplification or optimization, at which point the creation of
   certain types are bugs.  */

tree
create_tmp_var (tree type, const char *prefix)
{
  tree tmp_var;

  /* We don't allow types that are addressable (meaning we can't make copies),
     incomplete, or of variable size.  */
  gcc_assert (!TREE_ADDRESSABLE (type)
              && COMPLETE_TYPE_P (type)
              && TREE_CODE (TYPE_SIZE_UNIT (type)) == INTEGER_CST);

  tmp_var = create_tmp_var_raw (type, prefix);
  gimple_add_tmp_var (tmp_var);
  return tmp_var;
}

/*  Given a tree, try to return a useful variable name that we can use
    to prefix a temporary that is being assigned the value of the tree.
    I.E. given  <temp> = &A, return A.  */

const char *
get_name (tree t)
{
  tree stripped_decl;

  stripped_decl = t;
  STRIP_NOPS (stripped_decl);
  if (DECL_P (stripped_decl) && DECL_NAME (stripped_decl))
    return IDENTIFIER_POINTER (DECL_NAME (stripped_decl));
  else
    {
      switch (TREE_CODE (stripped_decl))
        {
        case ADDR_EXPR:
          return get_name (TREE_OPERAND (stripped_decl, 0));
          break;
        default:
          return NULL;
        }
    }
}

/* Create a temporary with a name derived from VAL.  Subroutine of
   lookup_tmp_var; nobody else should call this function.  */

static inline tree
create_tmp_from_val (tree val)
{
  return create_tmp_var (TREE_TYPE (val), get_name (val));
}

/* Create a temporary to hold the value of VAL.  If IS_FORMAL, try to reuse
   an existing expression temporary.  */

static tree
lookup_tmp_var (tree val, bool is_formal)
{
  tree ret;

  /* If not optimizing, never really reuse a temporary.  local-alloc
     won't allocate any variable that is used in more than one basic
     block, which means it will go into memory, causing much extra
     work in reload and final and poorer code generation, outweighing
     the extra memory allocation here.  */
  if (!optimize || !is_formal || TREE_SIDE_EFFECTS (val))
    ret = create_tmp_from_val (val);
  else
    {
      elt_t elt, *elt_p;
      void **slot;

      elt.val = val;
      slot = htab_find_slot (gimplify_ctxp->temp_htab, (void *)&elt, INSERT);
      if (*slot == NULL)
        {
          elt_p = xmalloc (sizeof (*elt_p));
          elt_p->val = val;
          elt_p->temp = ret = create_tmp_from_val (val);
          *slot = (void *) elt_p;
        }
      else
        {
          elt_p = (elt_t *) *slot;
          ret = elt_p->temp;
        }
    }

  if (is_formal)
    DECL_GIMPLE_FORMAL_TEMP_P (ret) = 1;

  return ret;
}

/* Returns a formal temporary variable initialized with VAL.  PRE_P is as
   in gimplify_expr.  Only use this function if:

   1) The value of the unfactored expression represented by VAL will not
      change between the initialization and use of the temporary, and
   2) The temporary will not be otherwise modified.

   For instance, #1 means that this is inappropriate for SAVE_EXPR temps,
   and #2 means it is inappropriate for && temps.

   For other cases, use get_initialized_tmp_var instead.  */

static tree
internal_get_tmp_var (tree val, tree *pre_p, tree *post_p, bool is_formal)
{
  tree t, mod;

  gimplify_expr (&val, pre_p, post_p, is_gimple_formal_tmp_rhs, fb_rvalue);

  t = lookup_tmp_var (val, is_formal);

  if (TREE_CODE (TREE_TYPE (t)) == COMPLEX_TYPE)
    DECL_COMPLEX_GIMPLE_REG_P (t) = 1;

  mod = build (MODIFY_EXPR, TREE_TYPE (t), t, val);

  if (EXPR_HAS_LOCATION (val))
    SET_EXPR_LOCUS (mod, EXPR_LOCUS (val));
  else
    SET_EXPR_LOCATION (mod, input_location);

  /* gimplify_modify_expr might want to reduce this further.  */
  gimplify_and_add (mod, pre_p);

  /* If we're gimplifying into ssa, gimplify_modify_expr will have
     given our temporary an ssa name.  Find and return it.  */
  if (gimplify_ctxp->into_ssa)
    t = TREE_OPERAND (mod, 0);

  return t;
}

tree
get_formal_tmp_var (tree val, tree *pre_p)
{
  return internal_get_tmp_var (val, pre_p, NULL, true);
}

/* Returns a temporary variable initialized with VAL.  PRE_P and POST_P
   are as in gimplify_expr.  */

tree
get_initialized_tmp_var (tree val, tree *pre_p, tree *post_p)
{
  return internal_get_tmp_var (val, pre_p, post_p, false);
}

/* Declares all the variables in VARS in SCOPE.  */

void
declare_tmp_vars (tree vars, tree scope)
{
  tree last = vars;
  if (last)
    {
      tree temps;

      /* C99 mode puts the default 'return 0;' for main outside the outer
         braces.  So drill down until we find an actual scope.  */
      while (TREE_CODE (scope) == COMPOUND_EXPR)
        scope = TREE_OPERAND (scope, 0);

      gcc_assert (TREE_CODE (scope) == BIND_EXPR);

      temps = nreverse (last);
      TREE_CHAIN (last) = BIND_EXPR_VARS (scope);
      BIND_EXPR_VARS (scope) = temps;
    }
}

void
gimple_add_tmp_var (tree tmp)
{
  gcc_assert (!TREE_CHAIN (tmp) && !DECL_SEEN_IN_BIND_EXPR_P (tmp));

  DECL_CONTEXT (tmp) = current_function_decl;
  DECL_SEEN_IN_BIND_EXPR_P (tmp) = 1;

  if (gimplify_ctxp)
    {
      TREE_CHAIN (tmp) = gimplify_ctxp->temps;
      gimplify_ctxp->temps = tmp;
    }
  else if (cfun)
    record_vars (tmp);
  else
    declare_tmp_vars (tmp, DECL_SAVED_TREE (current_function_decl));
}

/* Determines whether to assign a locus to the statement STMT.  */

static bool
should_carry_locus_p (tree stmt)
{
  /* Don't emit a line note for a label.  We particularly don't want to
     emit one for the break label, since it doesn't actually correspond
     to the beginning of the loop/switch.  */
  if (TREE_CODE (stmt) == LABEL_EXPR)
    return false;

  /* Do not annotate empty statements, since it confuses gcov.  */
  if (!TREE_SIDE_EFFECTS (stmt))
    return false;

  return true;
}

static void
annotate_one_with_locus (tree t, location_t locus)
{
  if (EXPR_P (t) && ! EXPR_HAS_LOCATION (t) && should_carry_locus_p (t))
    SET_EXPR_LOCATION (t, locus);
}

void
annotate_all_with_locus (tree *stmt_p, location_t locus)
{
  tree_stmt_iterator i;

  if (!*stmt_p)
    return;

  for (i = tsi_start (*stmt_p); !tsi_end_p (i); tsi_next (&i))
    {
      tree t = tsi_stmt (i);

      /* Assuming we've already been gimplified, we shouldn't
          see nested chaining constructs anymore.  */
      gcc_assert (TREE_CODE (t) != STATEMENT_LIST
                  && TREE_CODE (t) != COMPOUND_EXPR);

      annotate_one_with_locus (t, locus);
    }
}

/* Similar to copy_tree_r() but do not copy SAVE_EXPR or TARGET_EXPR nodes.
   These nodes model computations that should only be done once.  If we
   were to unshare something like SAVE_EXPR(i++), the gimplification
   process would create wrong code.  */

static tree
mostly_copy_tree_r (tree *tp, int *walk_subtrees, void *data)
{
  enum tree_code code = TREE_CODE (*tp);
  /* Don't unshare types, decls, constants and SAVE_EXPR nodes.  */
  if (TREE_CODE_CLASS (code) == tcc_type
      || TREE_CODE_CLASS (code) == tcc_declaration
      || TREE_CODE_CLASS (code) == tcc_constant
      || code == SAVE_EXPR || code == TARGET_EXPR
      /* We can't do anything sensible with a BLOCK used as an expression,
         but we also can't just die when we see it because of non-expression
         uses.  So just avert our eyes and cross our fingers.  Silly Java.  */
      || code == BLOCK)
    *walk_subtrees = 0;
  else
    {
      gcc_assert (code != BIND_EXPR);
      copy_tree_r (tp, walk_subtrees, data);
    }

  return NULL_TREE;
}

/* Callback for walk_tree to unshare most of the shared trees rooted at
   *TP.  If *TP has been visited already (i.e., TREE_VISITED (*TP) == 1),
   then *TP is deep copied by calling copy_tree_r.

   This unshares the same trees as copy_tree_r with the exception of
   SAVE_EXPR nodes.  These nodes model computations that should only be
   done once.  If we were to unshare something like SAVE_EXPR(i++), the
   gimplification process would create wrong code.  */

static tree
copy_if_shared_r (tree *tp, int *walk_subtrees ATTRIBUTE_UNUSED,
                  void *data ATTRIBUTE_UNUSED)
{
  tree t = *tp;
  enum tree_code code = TREE_CODE (t);

  /* Skip types, decls, and constants.  But we do want to look at their
     types and the bounds of types.  Mark them as visited so we properly
     unmark their subtrees on the unmark pass.  If we've already seen them,
     don't look down further.  */
  if (TREE_CODE_CLASS (code) == tcc_type
      || TREE_CODE_CLASS (code) == tcc_declaration
      || TREE_CODE_CLASS (code) == tcc_constant)
    {
      if (TREE_VISITED (t))
        *walk_subtrees = 0;
      else
        TREE_VISITED (t) = 1;
    }

  /* If this node has been visited already, unshare it and don't look
     any deeper.  */
  else if (TREE_VISITED (t))
    {
      walk_tree (tp, mostly_copy_tree_r, NULL, NULL);
      *walk_subtrees = 0;
    }

  /* Otherwise, mark the tree as visited and keep looking.  */
  else
    TREE_VISITED (t) = 1;

  return NULL_TREE;
}

static tree
unmark_visited_r (tree *tp, int *walk_subtrees ATTRIBUTE_UNUSED,
                  void *data ATTRIBUTE_UNUSED)
{
  if (TREE_VISITED (*tp))
    TREE_VISITED (*tp) = 0;
  else
    *walk_subtrees = 0;

  return NULL_TREE;
}

/* Unshare all the trees in BODY_P, a pointer into the body of FNDECL, and the
   bodies of any nested functions if we are unsharing the entire body of
   FNDECL.  */

static void
unshare_body (tree *body_p, tree fndecl)
{
  struct cgraph_node *cgn = cgraph_node (fndecl);

  walk_tree (body_p, copy_if_shared_r, NULL, NULL);
  if (body_p == &DECL_SAVED_TREE (fndecl))
    for (cgn = cgn->nested; cgn; cgn = cgn->next_nested)
      unshare_body (&DECL_SAVED_TREE (cgn->decl), cgn->decl);
}

/* Likewise, but mark all trees as not visited.  */

static void
unvisit_body (tree *body_p, tree fndecl)
{
  struct cgraph_node *cgn = cgraph_node (fndecl);

  walk_tree (body_p, unmark_visited_r, NULL, NULL);
  if (body_p == &DECL_SAVED_TREE (fndecl))
    for (cgn = cgn->nested; cgn; cgn = cgn->next_nested)
      unvisit_body (&DECL_SAVED_TREE (cgn->decl), cgn->decl);
}

/* Unshare T and all the trees reached from T via TREE_CHAIN.  */

static void
unshare_all_trees (tree t)
{
  walk_tree (&t, copy_if_shared_r, NULL, NULL);
  walk_tree (&t, unmark_visited_r, NULL, NULL);
}

/* Unconditionally make an unshared copy of EXPR.  This is used when using
   stored expressions which span multiple functions, such as BINFO_VTABLE,
   as the normal unsharing process can't tell that they're shared.  */

tree
unshare_expr (tree expr)
{
  walk_tree (&expr, mostly_copy_tree_r, NULL, NULL);
  return expr;
}

/* A terser interface for building a representation of an exception
   specification.  */

tree
gimple_build_eh_filter (tree body, tree allowed, tree failure)
{
  tree t;

  /* FIXME should the allowed types go in TREE_TYPE?  */
  t = build (EH_FILTER_EXPR, void_type_node, allowed, NULL_TREE);
  append_to_statement_list (failure, &EH_FILTER_FAILURE (t));

  t = build (TRY_CATCH_EXPR, void_type_node, NULL_TREE, t);
  append_to_statement_list (body, &TREE_OPERAND (t, 0));

  return t;
}

\f
/* WRAPPER is a code such as BIND_EXPR or CLEANUP_POINT_EXPR which can both
   contain statements and have a value.  Assign its value to a temporary
   and give it void_type_node.  Returns the temporary, or NULL_TREE if
   WRAPPER was already void.  */

tree
voidify_wrapper_expr (tree wrapper, tree temp)
{
  if (!VOID_TYPE_P (TREE_TYPE (wrapper)))
    {
      tree *p, sub = wrapper;

    restart:
      /* Set p to point to the body of the wrapper.  */
      switch (TREE_CODE (sub))
        {
        case BIND_EXPR:
          /* For a BIND_EXPR, the body is operand 1.  */
          p = &BIND_EXPR_BODY (sub);
          break;

        default:
          p = &TREE_OPERAND (sub, 0);
          break;
        }

      /* Advance to the last statement.  Set all container types to void.  */
      if (TREE_CODE (*p) == STATEMENT_LIST)
        {
          tree_stmt_iterator i = tsi_last (*p);
          p = tsi_end_p (i) ? NULL : tsi_stmt_ptr (i);
        }
      else
        {
          for (; TREE_CODE (*p) == COMPOUND_EXPR; p = &TREE_OPERAND (*p, 1))
            {
              TREE_SIDE_EFFECTS (*p) = 1;
              TREE_TYPE (*p) = void_type_node;
            }
        }

      if (p == NULL || IS_EMPTY_STMT (*p))
        ;
      /* Look through exception handling.  */
      else if (TREE_CODE (*p) == TRY_FINALLY_EXPR
               || TREE_CODE (*p) == TRY_CATCH_EXPR)
        {
          sub = *p;
          goto restart;
        }
      /* The C++ frontend already did this for us.  */
      else if (TREE_CODE (*p) == INIT_EXPR
               || TREE_CODE (*p) == TARGET_EXPR)
        temp = TREE_OPERAND (*p, 0);
      /* If we're returning a dereference, move the dereference
         outside the wrapper.  */
      else if (TREE_CODE (*p) == INDIRECT_REF)
        {
          tree ptr = TREE_OPERAND (*p, 0);
          temp = create_tmp_var (TREE_TYPE (ptr), "retval");
          *p = build (MODIFY_EXPR, TREE_TYPE (ptr), temp, ptr);
          temp = build1 (INDIRECT_REF, TREE_TYPE (TREE_TYPE (temp)), temp);
          /* If this is a BIND_EXPR for a const inline function, it might not
             have TREE_SIDE_EFFECTS set.  That is no longer accurate.  */
          TREE_SIDE_EFFECTS (wrapper) = 1;
        }
      else
        {
          if (!temp)
            temp = create_tmp_var (TREE_TYPE (wrapper), "retval");
          *p = build (MODIFY_EXPR, TREE_TYPE (temp), temp, *p);
          TREE_SIDE_EFFECTS (wrapper) = 1;
        }

      TREE_TYPE (wrapper) = void_type_node;
      return temp;
    }

  return NULL_TREE;
}

/* Prepare calls to builtins to SAVE and RESTORE the stack as well as
   a temporary through which they communicate.  */

static void
build_stack_save_restore (tree *save, tree *restore)
{
  tree save_call, tmp_var;

  save_call =
      build_function_call_expr (implicit_built_in_decls[BUILT_IN_STACK_SAVE],
                                NULL_TREE);
  tmp_var = create_tmp_var (ptr_type_node, "saved_stack");

  *save = build (MODIFY_EXPR, ptr_type_node, tmp_var, save_call);
  *restore =
    build_function_call_expr (implicit_built_in_decls[BUILT_IN_STACK_RESTORE],
                              tree_cons (NULL_TREE, tmp_var, NULL_TREE));
}

/* Gimplify a BIND_EXPR.  Just voidify and recurse.  */

static enum gimplify_status
gimplify_bind_expr (tree *expr_p, tree temp, tree *pre_p)
{
  tree bind_expr = *expr_p;
  bool old_save_stack = gimplify_ctxp->save_stack;
  tree t;

  temp = voidify_wrapper_expr (bind_expr, temp);

  /* Mark variables seen in this bind expr.  */
  for (t = BIND_EXPR_VARS (bind_expr); t ; t = TREE_CHAIN (t))
    {
      if (TREE_CODE (t) == VAR_DECL)
        DECL_SEEN_IN_BIND_EXPR_P (t) = 1;

      /* Preliminarily mark non-addressed complex variables as eligible
         for promotion to gimple registers.  We'll transform their uses
         as we find them.  */
      if (TREE_CODE (TREE_TYPE (t)) == COMPLEX_TYPE
          && !TREE_THIS_VOLATILE (t)
          && (TREE_CODE (t) == VAR_DECL && !DECL_HARD_REGISTER (t))
          && !needs_to_live_in_memory (t))
        DECL_COMPLEX_GIMPLE_REG_P (t) = 1;
    }

  gimple_push_bind_expr (bind_expr);
  gimplify_ctxp->save_stack = false;

  gimplify_to_stmt_list (&BIND_EXPR_BODY (bind_expr));

  if (gimplify_ctxp->save_stack)
    {
      tree stack_save, stack_restore;

      /* Save stack on entry and restore it on exit.  Add a try_finally
         block to achieve this.  Note that mudflap depends on the
         format of the emitted code: see mx_register_decls().  */
      build_stack_save_restore (&stack_save, &stack_restore);

      t = build (TRY_FINALLY_EXPR, void_type_node,
                 BIND_EXPR_BODY (bind_expr), NULL_TREE);
      append_to_statement_list (stack_restore, &TREE_OPERAND (t, 1));

      BIND_EXPR_BODY (bind_expr) = NULL_TREE;
      append_to_statement_list (stack_save, &BIND_EXPR_BODY (bind_expr));
      append_to_statement_list (t, &BIND_EXPR_BODY (bind_expr));
    }

  gimplify_ctxp->save_stack = old_save_stack;
  gimple_pop_bind_expr ();

  if (temp)
    {
      *expr_p = temp;
      append_to_statement_list (bind_expr, pre_p);
      return GS_OK;
    }
  else
    return GS_ALL_DONE;
}

/* Gimplify a RETURN_EXPR.  If the expression to be returned is not a
   GIMPLE value, it is assigned to a new temporary and the statement is
   re-written to return the temporary.

   PRE_P points to the list where side effects that must happen before
   STMT should be stored.  */

static enum gimplify_status
gimplify_return_expr (tree stmt, tree *pre_p)
{
  tree ret_expr = TREE_OPERAND (stmt, 0);
  tree result_decl, result;

  if (!ret_expr || TREE_CODE (ret_expr) == RESULT_DECL
      || ret_expr == error_mark_node)
    return GS_ALL_DONE;

  if (VOID_TYPE_P (TREE_TYPE (TREE_TYPE (current_function_decl))))
    result_decl = NULL_TREE;
  else
    {
      result_decl = TREE_OPERAND (ret_expr, 0);
      if (TREE_CODE (result_decl) == INDIRECT_REF)
        /* See through a return by reference.  */
        result_decl = TREE_OPERAND (result_decl, 0);

      gcc_assert ((TREE_CODE (ret_expr) == MODIFY_EXPR
                   || TREE_CODE (ret_expr) == INIT_EXPR)
                  && TREE_CODE (result_decl) == RESULT_DECL);
    }

  /* If aggregate_value_p is true, then we can return the bare RESULT_DECL.
     Recall that aggregate_value_p is FALSE for any aggregate type that is
     returned in registers.  If we're returning values in registers, then
     we don't want to extend the lifetime of the RESULT_DECL, particularly
     across another call.  In addition, for those aggregates for which
     hard_function_value generates a PARALLEL, we'll die during normal
     expansion of structure assignments; there's special code in expand_return
     to handle this case that does not exist in expand_expr.  */
  if (!result_decl
      || aggregate_value_p (result_decl, TREE_TYPE (current_function_decl)))
    result = result_decl;
  else if (gimplify_ctxp->return_temp)
    result = gimplify_ctxp->return_temp;
  else
    {
      result = create_tmp_var (TREE_TYPE (result_decl), NULL);

      /* ??? With complex control flow (usually involving abnormal edges),
         we can wind up warning about an uninitialized value for this.  Due
         to how this variable is constructed and initialized, this is never
         true.  Give up and never warn.  */
      TREE_NO_WARNING (result) = 1;

      gimplify_ctxp->return_temp = result;
    }

  /* Smash the lhs of the MODIFY_EXPR to the temporary we plan to use.
     Then gimplify the whole thing.  */
  if (result != result_decl)
    TREE_OPERAND (ret_expr, 0) = result;

  gimplify_and_add (TREE_OPERAND (stmt, 0), pre_p);

  /* If we didn't use a temporary, then the result is just the result_decl.
     Otherwise we need a simple copy.  This should already be gimple.  */
  if (result == result_decl)
    ret_expr = result;
  else
    ret_expr = build (MODIFY_EXPR, TREE_TYPE (result), result_decl, result);
  TREE_OPERAND (stmt, 0) = ret_expr;

  return GS_ALL_DONE;
}

/* Gimplifies a DECL_EXPR node *STMT_P by making any necessary allocation
   and initialization explicit.  */

static enum gimplify_status
gimplify_decl_expr (tree *stmt_p)
{
  tree stmt = *stmt_p;
  tree decl = DECL_EXPR_DECL (stmt);

  *stmt_p = NULL_TREE;

  if (TREE_TYPE (decl) == error_mark_node)
    return GS_ERROR;

  if ((TREE_CODE (decl) == TYPE_DECL
       || TREE_CODE (decl) == VAR_DECL)
      && !TYPE_SIZES_GIMPLIFIED (TREE_TYPE (decl)))
    gimplify_type_sizes (TREE_TYPE (decl), stmt_p);

  if (TREE_CODE (decl) == VAR_DECL && !DECL_EXTERNAL (decl))
    {
      tree init = DECL_INITIAL (decl);

      if (!TREE_CONSTANT (DECL_SIZE (decl)))
        {
          /* This is a variable-sized decl.  Simplify its size and mark it
             for deferred expansion.  Note that mudflap depends on the format
             of the emitted code: see mx_register_decls().  */
          tree t, args, addr, ptr_type;

          gimplify_one_sizepos (&DECL_SIZE (decl), stmt_p);
          gimplify_one_sizepos (&DECL_SIZE_UNIT (decl), stmt_p);

          /* All occurrences of this decl in final gimplified code will be
             replaced by indirection.  Setting DECL_VALUE_EXPR does two
             things: First, it lets the rest of the gimplifier know what
             replacement to use.  Second, it lets the debug info know
             where to find the value.  */
          ptr_type = build_pointer_type (TREE_TYPE (decl));
          addr = create_tmp_var (ptr_type, get_name (decl));
          DECL_IGNORED_P (addr) = 0;
          t = build_fold_indirect_ref (addr);
          SET_DECL_VALUE_EXPR (decl, t);
          DECL_HAS_VALUE_EXPR_P (decl) = 1;

          args = tree_cons (NULL, DECL_SIZE_UNIT (decl), NULL);
          t = built_in_decls[BUILT_IN_ALLOCA];
          t = build_function_call_expr (t, args);
          t = fold_convert (ptr_type, t);
          t = build2 (MODIFY_EXPR, void_type_node, addr, t);

          gimplify_and_add (t, stmt_p);

          /* Indicate that we need to restore the stack level when the
             enclosing BIND_EXPR is exited.  */
          gimplify_ctxp->save_stack = true;
        }

      if (init && init != error_mark_node)
        {
          if (!TREE_STATIC (decl))
            {
              DECL_INITIAL (decl) = NULL_TREE;
              init = build (MODIFY_EXPR, void_type_node, decl, init);
              gimplify_and_add (init, stmt_p);
            }
          else
            /* We must still examine initializers for static variables
               as they may contain a label address.  */
            walk_tree (&init, force_labels_r, NULL, NULL);
        }

      /* This decl isn't mentioned in the enclosing block, so add it to the
         list of temps.  FIXME it seems a bit of a kludge to say that
         anonymous artificial vars aren't pushed, but everything else is.  */
      if (DECL_ARTIFICIAL (decl) && DECL_NAME (decl) == NULL_TREE)
        gimple_add_tmp_var (decl);
    }

  return GS_ALL_DONE;
}

/* Gimplify a LOOP_EXPR.  Normally this just involves gimplifying the body
   and replacing the LOOP_EXPR with goto, but if the loop contains an
   EXIT_EXPR, we need to append a label for it to jump to.  */

static enum gimplify_status
gimplify_loop_expr (tree *expr_p, tree *pre_p)
{
  tree saved_label = gimplify_ctxp->exit_label;
  tree start_label = build1 (LABEL_EXPR, void_type_node, NULL_TREE);
  tree jump_stmt = build_and_jump (&LABEL_EXPR_LABEL (start_label));

  append_to_statement_list (start_label, pre_p);

  gimplify_ctxp->exit_label = NULL_TREE;

  gimplify_and_add (LOOP_EXPR_BODY (*expr_p), pre_p);

  if (gimplify_ctxp->exit_label)
    {
      append_to_statement_list (jump_stmt, pre_p);
      *expr_p = build1 (LABEL_EXPR, void_type_node, gimplify_ctxp->exit_label);
    }
  else
    *expr_p = jump_stmt;

  gimplify_ctxp->exit_label = saved_label;

  return GS_ALL_DONE;
}

/* Compare two case labels.  Because the front end should already have
   made sure that case ranges do not overlap, it is enough to only compare
   the CASE_LOW values of each case label.  */

static int
compare_case_labels (const void *p1, const void *p2)
{
  tree case1 = *(tree *)p1;
  tree case2 = *(tree *)p2;

  return tree_int_cst_compare (CASE_LOW (case1), CASE_LOW (case2));
}

/* Sort the case labels in LABEL_VEC in place in ascending order.  */

void
sort_case_labels (tree label_vec)
{
  size_t len = TREE_VEC_LENGTH (label_vec);
  tree default_case = TREE_VEC_ELT (label_vec, len - 1);

  if (CASE_LOW (default_case))
    {
      size_t i;

      /* The last label in the vector should be the default case
         but it is not.  */
      for (i = 0; i < len; ++i)
        {
          tree t = TREE_VEC_ELT (label_vec, i);
          if (!CASE_LOW (t))
            {
              default_case = t;
              TREE_VEC_ELT (label_vec, i) = TREE_VEC_ELT (label_vec, len - 1);
              TREE_VEC_ELT (label_vec, len - 1) = default_case;
              break;
            }
        }
    }

  qsort (&TREE_VEC_ELT (label_vec, 0), len - 1, sizeof (tree),
         compare_case_labels);
}

/* Gimplify a SWITCH_EXPR, and collect a TREE_VEC of the labels it can
   branch to.  */

static enum gimplify_status
gimplify_switch_expr (tree *expr_p, tree *pre_p)
{
  tree switch_expr = *expr_p;
  enum gimplify_status ret;

  ret = gimplify_expr (&SWITCH_COND (switch_expr), pre_p, NULL,
                       is_gimple_val, fb_rvalue);

  if (SWITCH_BODY (switch_expr))
    {
      VEC(tree,heap) *labels, *saved_labels;
      tree label_vec, default_case = NULL_TREE;
      size_t i, len;

      /* If someone can be bothered to fill in the labels, they can
         be bothered to null out the body too.  */
      gcc_assert (!SWITCH_LABELS (switch_expr));

      saved_labels = gimplify_ctxp->case_labels;
      gimplify_ctxp->case_labels = VEC_alloc (tree, heap, 8);

      gimplify_to_stmt_list (&SWITCH_BODY (switch_expr));

      labels = gimplify_ctxp->case_labels;
      gimplify_ctxp->case_labels = saved_labels;

      len = VEC_length (tree, labels);

      for (i = 0; i < len; ++i)
        {
          tree t = VEC_index (tree, labels, i);
          if (!CASE_LOW (t))
            {
              /* The default case must be the last label in the list.  */
              default_case = t;
              VEC_replace (tree, labels, i, VEC_index (tree, labels, len - 1));
              len--;
              break;
            }
        }

      label_vec = make_tree_vec (len + 1);
      SWITCH_LABELS (*expr_p) = label_vec;
      append_to_statement_list (switch_expr, pre_p);

      if (! default_case)
        {
          /* If the switch has no default label, add one, so that we jump
             around the switch body.  */
          default_case = build (CASE_LABEL_EXPR, void_type_node, NULL_TREE,
                                NULL_TREE, create_artificial_label ());
          append_to_statement_list (SWITCH_BODY (switch_expr), pre_p);
          *expr_p = build (LABEL_EXPR, void_type_node,
                           CASE_LABEL (default_case));
        }
      else
        *expr_p = SWITCH_BODY (switch_expr);

      for (i = 0; i < len; ++i)
        TREE_VEC_ELT (label_vec, i) = VEC_index (tree, labels, i);
      TREE_VEC_ELT (label_vec, len) = default_case;

      VEC_free (tree, heap, labels);

      sort_case_labels (label_vec);

      SWITCH_BODY (switch_expr) = NULL;
    }
  else
    gcc_assert (SWITCH_LABELS (switch_expr));

  return ret;
}

static enum gimplify_status
gimplify_case_label_expr (tree *expr_p)
{
  tree expr = *expr_p;

  gcc_assert (gimplify_ctxp->case_labels);
  VEC_safe_push (tree, heap, gimplify_ctxp->case_labels, expr);
  *expr_p = build (LABEL_EXPR, void_type_node, CASE_LABEL (expr));
  return GS_ALL_DONE;
}

/* Build a GOTO to the LABEL_DECL pointed to by LABEL_P, building it first
   if necessary.  */

tree
build_and_jump (tree *label_p)
{
  if (label_p == NULL)
    /* If there's nowhere to jump, just fall through.  */
    return NULL_TREE;

  if (*label_p == NULL_TREE)
    {
      tree label = create_artificial_label ();
      *label_p = label;
    }

  return build1 (GOTO_EXPR, void_type_node, *label_p);
}

/* Gimplify an EXIT_EXPR by converting to a GOTO_EXPR inside a COND_EXPR.
   This also involves building a label to jump to and communicating it to
   gimplify_loop_expr through gimplify_ctxp->exit_label.  */

static enum gimplify_status
gimplify_exit_expr (tree *expr_p)
{
  tree cond = TREE_OPERAND (*expr_p, 0);
  tree expr;

  expr = build_and_jump (&gimplify_ctxp->exit_label);
  expr = build (COND_EXPR, void_type_node, cond, expr, NULL_TREE);
  *expr_p = expr;

  return GS_OK;
}

/* A helper function to be called via walk_tree.  Mark all labels under *TP
   as being forced.  To be called for DECL_INITIAL of static variables.  */

tree
force_labels_r (tree *tp, int *walk_subtrees, void *data ATTRIBUTE_UNUSED)
{
  if (TYPE_P (*tp))
    *walk_subtrees = 0;
  if (TREE_CODE (*tp) == LABEL_DECL)
    FORCED_LABEL (*tp) = 1;

  return NULL_TREE;
}

/* *EXPR_P is a COMPONENT_REF being used as an rvalue.  If its type is
   different from its canonical type, wrap the whole thing inside a
   NOP_EXPR and force the type of the COMPONENT_REF to be the canonical
   type.

   The canonical type of a COMPONENT_REF is the type of the field being
   referenced--unless the field is a bit-field which can be read directly
   in a smaller mode, in which case the canonical type is the
   sign-appropriate type corresponding to that mode.  */

static void
canonicalize_component_ref (tree *expr_p)
{
  tree expr = *expr_p;
  tree type;

  gcc_assert (TREE_CODE (expr) == COMPONENT_REF);

  if (INTEGRAL_TYPE_P (TREE_TYPE (expr)))
    type = TREE_TYPE (get_unwidened (expr, NULL_TREE));
  else
    type = TREE_TYPE (TREE_OPERAND (expr, 1));

  if (TREE_TYPE (expr) != type)
    {
      tree old_type = TREE_TYPE (expr);

      /* Set the type of the COMPONENT_REF to the underlying type.  */
      TREE_TYPE (expr) = type;

      /* And wrap the whole thing inside a NOP_EXPR.  */
      expr = build1 (NOP_EXPR, old_type, expr);

      *expr_p = expr;
    }
}

/* If a NOP conversion is changing a pointer to array of foo to a pointer
   to foo, embed that change in the ADDR_EXPR by converting
      T array[U];
      (T *)&array
   ==>
      &array[L]
   where L is the lower bound.  For simplicity, only do this for constant
   lower bound.  */

static void
canonicalize_addr_expr (tree *expr_p)
{
  tree expr = *expr_p;
  tree ctype = TREE_TYPE (expr);
  tree addr_expr = TREE_OPERAND (expr, 0);
  tree atype = TREE_TYPE (addr_expr);
  tree dctype, datype, ddatype, otype, obj_expr;

  /* Both cast and addr_expr types should be pointers.  */
  if (!POINTER_TYPE_P (ctype) || !POINTER_TYPE_P (atype))
    return;

  /* The addr_expr type should be a pointer to an array.  */
  datype = TREE_TYPE (atype);
  if (TREE_CODE (datype) != ARRAY_TYPE)
    return;

  /* Both cast and addr_expr types should address the same object type.  */
  dctype = TREE_TYPE (ctype);
  ddatype = TREE_TYPE (datype);
  if (!lang_hooks.types_compatible_p (ddatype, dctype))
    return;

  /* The addr_expr and the object type should match.  */
  obj_expr = TREE_OPERAND (addr_expr, 0);
  otype = TREE_TYPE (obj_expr);
  if (!lang_hooks.types_compatible_p (otype, datype))
    return;

  /* The lower bound and element sizes must be constant.  */
  if (!TYPE_SIZE_UNIT (dctype)
      || TREE_CODE (TYPE_SIZE_UNIT (dctype)) != INTEGER_CST
      || !TYPE_DOMAIN (datype) || !TYPE_MIN_VALUE (TYPE_DOMAIN (datype))
      || TREE_CODE (TYPE_MIN_VALUE (TYPE_DOMAIN (datype))) != INTEGER_CST)
    return;

  /* All checks succeeded.  Build a new node to merge the cast.  */
  *expr_p = build4 (ARRAY_REF, dctype, obj_expr,
                    TYPE_MIN_VALUE (TYPE_DOMAIN (datype)),
                    TYPE_MIN_VALUE (TYPE_DOMAIN (datype)),
                    size_binop (EXACT_DIV_EXPR, TYPE_SIZE_UNIT (dctype),
                                size_int (TYPE_ALIGN_UNIT (dctype))));
  *expr_p = build1 (ADDR_EXPR, ctype, *expr_p);
}

/* *EXPR_P is a NOP_EXPR or CONVERT_EXPR.  Remove it and/or other conversions
   underneath as appropriate.  */

static enum gimplify_status
gimplify_conversion (tree *expr_p)
{
  gcc_assert (TREE_CODE (*expr_p) == NOP_EXPR
              || TREE_CODE (*expr_p) == CONVERT_EXPR);
  
  /* Then strip away all but the outermost conversion.  */
  STRIP_SIGN_NOPS (TREE_OPERAND (*expr_p, 0));

  /* And remove the outermost conversion if it's useless.  */
  if (tree_ssa_useless_type_conversion (*expr_p))
    *expr_p = TREE_OPERAND (*expr_p, 0);

  /* If we still have a conversion at the toplevel,
     then canonicalize some constructs.  */
  if (TREE_CODE (*expr_p) == NOP_EXPR || TREE_CODE (*expr_p) == CONVERT_EXPR)
    {
      tree sub = TREE_OPERAND (*expr_p, 0);

      /* If a NOP conversion is changing the type of a COMPONENT_REF
         expression, then canonicalize its type now in order to expose more
         redundant conversions.  */
      if (TREE_CODE (sub) == COMPONENT_REF)
        canonicalize_component_ref (&TREE_OPERAND (*expr_p, 0));

      /* If a NOP conversion is changing a pointer to array of foo
         to a pointer to foo, embed that change in the ADDR_EXPR.  */
      else if (TREE_CODE (sub) == ADDR_EXPR)
        canonicalize_addr_expr (expr_p);
    }

  return GS_OK;
}

/* Gimplify the COMPONENT_REF, ARRAY_REF, REALPART_EXPR or IMAGPART_EXPR
   node pointed to by EXPR_P.

      compound_lval
              : min_lval '[' val ']'
              | min_lval '.' ID
              | compound_lval '[' val ']'
              | compound_lval '.' ID

   This is not part of the original SIMPLE definition, which separates
   array and member references, but it seems reasonable to handle them
   together.  Also, this way we don't run into problems with union
   aliasing; gcc requires that for accesses through a union to alias, the
   union reference must be explicit, which was not always the case when we
   were splitting up array and member refs.

   PRE_P points to the list where side effects that must happen before
     *EXPR_P should be stored.

   POST_P points to the list where side effects that must happen after
     *EXPR_P should be stored.  */

static enum gimplify_status
gimplify_compound_lval (tree *expr_p, tree *pre_p,
                        tree *post_p, fallback_t fallback)
{
  tree *p;
  VEC(tree,heap) *stack;
  enum gimplify_status ret = GS_OK, tret;
  int i;

  /* Create a stack of the subexpressions so later we can walk them in
     order from inner to outer.  */
  stack = VEC_alloc (tree, heap, 10);

  /* We can handle anything that get_inner_reference can deal with.  */
  for (p = expr_p; ; p = &TREE_OPERAND (*p, 0))
    {
      /* Fold INDIRECT_REFs now to turn them into ARRAY_REFs.  */
      if (TREE_CODE (*p) == INDIRECT_REF)
        *p = fold_indirect_ref (*p);
      if (!handled_component_p (*p))
        break;
      VEC_safe_push (tree, heap, stack, *p);
    }

  gcc_assert (VEC_length (tree, stack));

  /* Now STACK is a stack of pointers to all the refs we've walked through
     and P points to the innermost expression.

     Java requires that we elaborated nodes in source order.  That
     means we must gimplify the inner expression followed by each of
     the indices, in order.  But we can't gimplify the inner
     expression until we deal with any variable bounds, sizes, or
     positions in order to deal with PLACEHOLDER_EXPRs.

     So we do this in three steps.  First we deal with the annotations
     for any variables in the components, then we gimplify the base,
     then we gimplify any indices, from left to right.  */
  for (i = VEC_length (tree, stack) - 1; i >= 0; i--)
    {
      tree t = VEC_index (tree, stack, i);

      if (TREE_CODE (t) == ARRAY_REF || TREE_CODE (t) == ARRAY_RANGE_REF)
        {
          /* Gimplify the low bound and element type size and put them into
             the ARRAY_REF.  If these values are set, they have already been
             gimplified.  */
          if (!TREE_OPERAND (t, 2))
            {
              tree low = unshare_expr (array_ref_low_bound (t));
              if (!is_gimple_min_invariant (low))
                {
                  TREE_OPERAND (t, 2) = low;
                  tret = gimplify_expr (&TREE_OPERAND (t, 2), pre_p, post_p,
                                        is_gimple_formal_tmp_reg, fb_rvalue);
                  ret = MIN (ret, tret);
                }
            }

          if (!TREE_OPERAND (t, 3))
            {
              tree elmt_type = TREE_TYPE (TREE_TYPE (TREE_OPERAND (t, 0)));
              tree elmt_size = unshare_expr (array_ref_element_size (t));
              tree factor = size_int (TYPE_ALIGN_UNIT (elmt_type));

              /* Divide the element size by the alignment of the element
                 type (above).  */
              elmt_size = size_binop (EXACT_DIV_EXPR, elmt_size, factor);

              if (!is_gimple_min_invariant (elmt_size))
                {
                  TREE_OPERAND (t, 3) = elmt_size;
                  tret = gimplify_expr (&TREE_OPERAND (t, 3), pre_p, post_p,
                                        is_gimple_formal_tmp_reg, fb_rvalue);
                  ret = MIN (ret, tret);
                }
            }
        }
      else if (TREE_CODE (t) == COMPONENT_REF)
        {
          /* Set the field offset into T and gimplify it.  */
          if (!TREE_OPERAND (t, 2))
            {
              tree offset = unshare_expr (component_ref_field_offset (t));
              tree field = TREE_OPERAND (t, 1);
              tree factor
                = size_int (DECL_OFFSET_ALIGN (field) / BITS_PER_UNIT);

              /* Divide the offset by its alignment.  */
              offset = size_binop (EXACT_DIV_EXPR, offset, factor);

              if (!is_gimple_min_invariant (offset))
                {
                  TREE_OPERAND (t, 2) = offset;
                  tret = gimplify_expr (&TREE_OPERAND (t, 2), pre_p, post_p,
                                        is_gimple_formal_tmp_reg, fb_rvalue);
                  ret = MIN (ret, tret);
                }
            }
        }
    }

  /* Step 2 is to gimplify the base expression.  */
  tret = gimplify_expr (p, pre_p, post_p, is_gimple_min_lval, fallback);
  ret = MIN (ret, tret);

  /* And finally, the indices and operands to BIT_FIELD_REF.  During this
     loop we also remove any useless conversions.  */
  for (; VEC_length (tree, stack) > 0; )
    {
      tree t = VEC_pop (tree, stack);

      if (TREE_CODE (t) == ARRAY_REF || TREE_CODE (t) == ARRAY_RANGE_REF)
        {
          /* Gimplify the dimension.
             Temporary fix for gcc.c-torture/execute/20040313-1.c.
             Gimplify non-constant array indices into a temporary
             variable.
             FIXME - The real fix is to gimplify post-modify
             expressions into a minimal gimple lvalue.  However, that
             exposes bugs in alias analysis.  The alias analyzer does
             not handle &PTR->FIELD very well.  Will fix after the
             branch is merged into mainline (dnovillo 2004-05-03).  */
          if (!is_gimple_min_invariant (TREE_OPERAND (t, 1)))
            {
              tret = gimplify_expr (&TREE_OPERAND (t, 1), pre_p, post_p,
                                    is_gimple_formal_tmp_reg, fb_rvalue);
              ret = MIN (ret, tret);
            }
        }
      else if (TREE_CODE (t) == BIT_FIELD_REF)
        {
          tret = gimplify_expr (&TREE_OPERAND (t, 1), pre_p, post_p,
                                is_gimple_val, fb_rvalue);
          ret = MIN (ret, tret);
          tret = gimplify_expr (&TREE_OPERAND (t, 2), pre_p, post_p,
                                is_gimple_val, fb_rvalue);
          ret = MIN (ret, tret);
        }

      STRIP_USELESS_TYPE_CONVERSION (TREE_OPERAND (t, 0));

      /* The innermost expression P may have originally had TREE_SIDE_EFFECTS
         set which would have caused all the outer expressions in EXPR_P
         leading to P to also have had TREE_SIDE_EFFECTS set.  */
      recalculate_side_effects (t);
    }

  tret = gimplify_expr (p, pre_p, post_p, is_gimple_min_lval, fallback);
  ret = MIN (ret, tret);

  /* If the outermost expression is a COMPONENT_REF, canonicalize its type.  */
  if ((fallback & fb_rvalue) && TREE_CODE (*expr_p) == COMPONENT_REF)
    {
      canonicalize_component_ref (expr_p);
      ret = MIN (ret, GS_OK);
    }

  VEC_free (tree, heap, stack);

  return ret;
}

/*  Gimplify the self modifying expression pointed to by EXPR_P
    (++, --, +=, -=).

    PRE_P points to the list where side effects that must happen before
        *EXPR_P should be stored.

    POST_P points to the list where side effects that must happen after
        *EXPR_P should be stored.

    WANT_VALUE is nonzero iff we want to use the value of this expression
        in another expression.  */

static enum gimplify_status
gimplify_self_mod_expr (tree *expr_p, tree *pre_p, tree *post_p,
                        bool want_value)
{
  enum tree_code code;
  tree lhs, lvalue, rhs, t1;
  bool postfix;
  enum tree_code arith_code;
  enum gimplify_status ret;

  code = TREE_CODE (*expr_p);

  gcc_assert (code == POSTINCREMENT_EXPR || code == POSTDECREMENT_EXPR
              || code == PREINCREMENT_EXPR || code == PREDECREMENT_EXPR);

  /* Prefix or postfix?  */
  if (code == POSTINCREMENT_EXPR || code == POSTDECREMENT_EXPR)
    /* Faster to treat as prefix if result is not used.  */
    postfix = want_value;
  else
    postfix = false;

  /* Add or subtract?  */
  if (code == PREINCREMENT_EXPR || code == POSTINCREMENT_EXPR)
    arith_code = PLUS_EXPR;
  else
    arith_code = MINUS_EXPR;

  /* Gimplify the LHS into a GIMPLE lvalue.  */
  lvalue = TREE_OPERAND (*expr_p, 0);
  ret = gimplify_expr (&lvalue, pre_p, post_p, is_gimple_lvalue, fb_lvalue);
  if (ret == GS_ERROR)
    return ret;

  /* Extract the operands to the arithmetic operation.  */
  lhs = lvalue;
  rhs = TREE_OPERAND (*expr_p, 1);

  /* For postfix operator, we evaluate the LHS to an rvalue and then use
     that as the result value and in the postqueue operation.  */
  if (postfix)
    {
      ret = gimplify_expr (&lhs, pre_p, post_p, is_gimple_val, fb_rvalue);
      if (ret == GS_ERROR)
        return ret;
    }

  t1 = build (arith_code, TREE_TYPE (*expr_p), lhs, rhs);
  t1 = build (MODIFY_EXPR, TREE_TYPE (lvalue), lvalue, t1);

  if (postfix)
    {
      gimplify_and_add (t1, post_p);
      *expr_p = lhs;
      return GS_ALL_DONE;
    }
  else
    {
      *expr_p = t1;
      return GS_OK;
    }
}

/* If *EXPR_P has a variable sized type, wrap it in a WITH_SIZE_EXPR.  */

static void
maybe_with_size_expr (tree *expr_p)
{
  tree expr = *expr_p;
  tree type = TREE_TYPE (expr);
  tree size;

  /* If we've already wrapped this or the type is error_mark_node, we can't do
     anything.  */
  if (TREE_CODE (expr) == WITH_SIZE_EXPR
      || type == error_mark_node)
    return;

  /* If the size isn't known or is a constant, we have nothing to do.  */
  size = TYPE_SIZE_UNIT (type);
  if (!size || TREE_CODE (size) == INTEGER_CST)
    return;

  /* Otherwise, make a WITH_SIZE_EXPR.  */
  size = unshare_expr (size);
  size = SUBSTITUTE_PLACEHOLDER_IN_EXPR (size, expr);
  *expr_p = build2 (WITH_SIZE_EXPR, type, expr, size);
}

/* Subroutine of gimplify_call_expr:  Gimplify a single argument.  */

static enum gimplify_status
gimplify_arg (tree *expr_p, tree *pre_p)
{
  bool (*test) (tree);
  fallback_t fb;

  /* In general, we allow lvalues for function arguments to avoid
     extra overhead of copying large aggregates out of even larger
     aggregates into temporaries only to copy the temporaries to
     the argument list.  Make optimizers happy by pulling out to
     temporaries those types that fit in registers.  */
  if (is_gimple_reg_type (TREE_TYPE (*expr_p)))
    test = is_gimple_val, fb = fb_rvalue;
  else
    test = is_gimple_lvalue, fb = fb_either;

  /* If this is a variable sized type, we must remember the size.  */
  maybe_with_size_expr (expr_p);

  /* There is a sequence point before a function call.  Side effects in
     the argument list must occur before the actual call. So, when
     gimplifying arguments, force gimplify_expr to use an internal
     post queue which is then appended to the end of PRE_P.  */
  return gimplify_expr (expr_p, pre_p, NULL, test, fb);
}

/* Gimplify the CALL_EXPR node pointed to by EXPR_P.  PRE_P points to the
   list where side effects that must happen before *EXPR_P should be stored.
   WANT_VALUE is true if the result of the call is desired.  */

static enum gimplify_status
gimplify_call_expr (tree *expr_p, tree *pre_p, bool want_value)
{
  tree decl;
  tree arglist;
  enum gimplify_status ret;

  gcc_assert (TREE_CODE (*expr_p) == CALL_EXPR);

  /* For reliable diagnostics during inlining, it is necessary that
     every call_expr be annotated with file and line.  */
  if (! EXPR_HAS_LOCATION (*expr_p))
    SET_EXPR_LOCATION (*expr_p, input_location);

  /* This may be a call to a builtin function.

     Builtin function calls may be transformed into different
     (and more efficient) builtin function calls under certain
     circumstances.  Unfortunately, gimplification can muck things
     up enough that the builtin expanders are not aware that certain
     transformations are still valid.

     So we attempt transformation/gimplification of the call before
     we gimplify the CALL_EXPR.  At this time we do not manage to
     transform all calls in the same manner as the expanders do, but
     we do transform most of them.  */
  decl = get_callee_fndecl (*expr_p);
  if (decl && DECL_BUILT_IN (decl))
    {
      tree fndecl = get_callee_fndecl (*expr_p);
      tree arglist = TREE_OPERAND (*expr_p, 1);
      tree new = fold_builtin (fndecl, arglist, !want_value);

      if (new && new != *expr_p)
        {
          /* There was a transformation of this call which computes the
             same value, but in a more efficient way.  Return and try
             again.  */
          *expr_p = new;
          return GS_OK;
        }

      if (DECL_BUILT_IN_CLASS (decl) == BUILT_IN_NORMAL
          && DECL_FUNCTION_CODE (decl) == BUILT_IN_VA_START)
        {
          if (!arglist || !TREE_CHAIN (arglist))
            {
              error ("too few arguments to function %<va_start%>");
              *expr_p = build_empty_stmt ();
              return GS_OK;
            }
          
          if (fold_builtin_next_arg (TREE_CHAIN (arglist)))
            {
              *expr_p = build_empty_stmt ();
              return GS_OK;
            }
          /* Avoid gimplifying the second argument to va_start, which needs
             to be the plain PARM_DECL.  */
          return gimplify_arg (&TREE_VALUE (TREE_OPERAND (*expr_p, 1)), pre_p);
        }
    }

  /* There is a sequence point before the call, so any side effects in
     the calling expression must occur before the actual call.  Force
     gimplify_expr to use an internal post queue.  */
  ret = gimplify_expr (&TREE_OPERAND (*expr_p, 0), pre_p, NULL,
                       is_gimple_call_addr, fb_rvalue);

  if (PUSH_ARGS_REVERSED)
    TREE_OPERAND (*expr_p, 1) = nreverse (TREE_OPERAND (*expr_p, 1));
  for (arglist = TREE_OPERAND (*expr_p, 1); arglist;
       arglist = TREE_CHAIN (arglist))
    {
      enum gimplify_status t;

      t = gimplify_arg (&TREE_VALUE (arglist), pre_p);

      if (t == GS_ERROR)
        ret = GS_ERROR;
    }
  if (PUSH_ARGS_REVERSED)
    TREE_OPERAND (*expr_p, 1) = nreverse (TREE_OPERAND (*expr_p, 1));

  /* Try this again in case gimplification exposed something.  */
  if (ret != GS_ERROR && decl && DECL_BUILT_IN (decl))
    {
      tree fndecl = get_callee_fndecl (*expr_p);
      tree arglist = TREE_OPERAND (*expr_p, 1);
      tree new = fold_builtin (fndecl, arglist, !want_value);

      if (new && new != *expr_p)
        {
          /* There was a transformation of this call which computes the
             same value, but in a more efficient way.  Return and try
             again.  */
          *expr_p = new;
          return GS_OK;
        }
    }

  /* If the function is "const" or "pure", then clear TREE_SIDE_EFFECTS on its
     decl.  This allows us to eliminate redundant or useless
     calls to "const" functions.  */
  if (TREE_CODE (*expr_p) == CALL_EXPR
      && (call_expr_flags (*expr_p) & (ECF_CONST | ECF_PURE)))
    TREE_SIDE_EFFECTS (*expr_p) = 0;

  return ret;
}

/* Handle shortcut semantics in the predicate operand of a COND_EXPR by
   rewriting it into multiple COND_EXPRs, and possibly GOTO_EXPRs.

   TRUE_LABEL_P and FALSE_LABEL_P point to the labels to jump to if the
   condition is true or false, respectively.  If null, we should generate
   our own to skip over the evaluation of this specific expression.

   This function is the tree equivalent of do_jump.

   shortcut_cond_r should only be called by shortcut_cond_expr.  */

static tree
shortcut_cond_r (tree pred, tree *true_label_p, tree *false_label_p)
{
  tree local_label = NULL_TREE;
  tree t, expr = NULL;

  /* OK, it's not a simple case; we need to pull apart the COND_EXPR to
     retain the shortcut semantics.  Just insert the gotos here;
     shortcut_cond_expr will append the real blocks later.  */
  if (TREE_CODE (pred) == TRUTH_ANDIF_EXPR)
    {
      /* Turn if (a && b) into

         if (a); else goto no;
         if (b) goto yes; else goto no;
         (no:) */

      if (false_label_p == NULL)
        false_label_p = &local_label;

      t = shortcut_cond_r (TREE_OPERAND (pred, 0), NULL, false_label_p);
      append_to_statement_list (t, &expr);

      t = shortcut_cond_r (TREE_OPERAND (pred, 1), true_label_p,
                           false_label_p);
      append_to_statement_list (t, &expr);
    }
  else if (TREE_CODE (pred) == TRUTH_ORIF_EXPR)
    {
      /* Turn if (a || b) into

         if (a) goto yes;
         if (b) goto yes; else goto no;
         (yes:) */

      if (true_label_p == NULL)
        true_label_p = &local_label;

      t = shortcut_cond_r (TREE_OPERAND (pred, 0), true_label_p, NULL);
      append_to_statement_list (t, &expr);

      t = shortcut_cond_r (TREE_OPERAND (pred, 1), true_label_p,
                           false_label_p);
      append_to_statement_list (t, &expr);
    }
  else if (TREE_CODE (pred) == COND_EXPR)
    {
      /* As long as we're messing with gotos, turn if (a ? b : c) into
         if (a)
           if (b) goto yes; else goto no;
         else
           if (c) goto yes; else goto no;  */
      expr = build (COND_EXPR, void_type_node, TREE_OPERAND (pred, 0),
                    shortcut_cond_r (TREE_OPERAND (pred, 1), true_label_p,
                                     false_label_p),
                    shortcut_cond_r (TREE_OPERAND (pred, 2), true_label_p,
                                     false_label_p));
    }
  else
    {
      expr = build (COND_EXPR, void_type_node, pred,
                    build_and_jump (true_label_p),
                    build_and_jump (false_label_p));
    }

  if (local_label)
    {
      t = build1 (LABEL_EXPR, void_type_node, local_label);
      append_to_statement_list (t, &expr);
    }

  return expr;
}

static tree
shortcut_cond_expr (tree expr)
{
  tree pred = TREE_OPERAND (expr, 0);
  tree then_ = TREE_OPERAND (expr, 1);
  tree else_ = TREE_OPERAND (expr, 2);
  tree true_label, false_label, end_label, t;
  tree *true_label_p;
  tree *false_label_p;
  bool emit_end, emit_false, jump_over_else;
  bool then_se = then_ && TREE_SIDE_EFFECTS (then_);
  bool else_se = else_ && TREE_SIDE_EFFECTS (else_);

  /* First do simple transformations.  */
  if (!else_se)
    {
      /* If there is no 'else', turn (a && b) into if (a) if (b).  */
      while (TREE_CODE (pred) == TRUTH_ANDIF_EXPR)
        {
          TREE_OPERAND (expr, 0) = TREE_OPERAND (pred, 1);
          then_ = shortcut_cond_expr (expr);
          then_se = then_ && TREE_SIDE_EFFECTS (then_);
          pred = TREE_OPERAND (pred, 0);
          expr = build (COND_EXPR, void_type_node, pred, then_, NULL_TREE);
        }
    }
  if (!then_se)
    {
      /* If there is no 'then', turn
           if (a || b); else d
         into
           if (a); else if (b); else d.  */
      while (TREE_CODE (pred) == TRUTH_ORIF_EXPR)
        {
          TREE_OPERAND (expr, 0) = TREE_OPERAND (pred, 1);
          else_ = shortcut_cond_expr (expr);
          else_se = else_ && TREE_SIDE_EFFECTS (else_);
          pred = TREE_OPERAND (pred, 0);
          expr = build (COND_EXPR, void_type_node, pred, NULL_TREE, else_);
        }
    }

  /* If we're done, great.  */
  if (TREE_CODE (pred) != TRUTH_ANDIF_EXPR
      && TREE_CODE (pred) != TRUTH_ORIF_EXPR)
    return expr;

  /* Otherwise we need to mess with gotos.  Change
       if (a) c; else d;
     to
       if (a); else goto no;
       c; goto end;
       no: d; end:
     and recursively gimplify the condition.  */

  true_label = false_label = end_label = NULL_TREE;

  /* If our arms just jump somewhere, hijack those labels so we don't
     generate jumps to jumps.  */

  if (then_
      && TREE_CODE (then_) == GOTO_EXPR
      && TREE_CODE (GOTO_DESTINATION (then_)) == LABEL_DECL)
    {
      true_label = GOTO_DESTINATION (then_);
      then_ = NULL;
      then_se = false;
    }

  if (else_
      && TREE_CODE (else_) == GOTO_EXPR
      && TREE_CODE (GOTO_DESTINATION (else_)) == LABEL_DECL)
    {
      false_label = GOTO_DESTINATION (else_);
      else_ = NULL;
      else_se = false;
    }

  /* If we aren't hijacking a label for the 'then' branch, it falls through.  */
  if (true_label)
    true_label_p = &true_label;
  else
    true_label_p = NULL;

  /* The 'else' branch also needs a label if it contains interesting code.  */
  if (false_label || else_se)
    false_label_p = &false_label;
  else
    false_label_p = NULL;

  /* If there was nothing else in our arms, just forward the label(s).  */
  if (!then_se && !else_se)
    return shortcut_cond_r (pred, true_label_p, false_label_p);

  /* If our last subexpression already has a terminal label, reuse it.  */
  if (else_se)
    expr = expr_last (else_);
  else if (then_se)
    expr = expr_last (then_);
  else
    expr = NULL;
  if (expr && TREE_CODE (expr) == LABEL_EXPR)
    end_label = LABEL_EXPR_LABEL (expr);

  /* If we don't care about jumping to the 'else' branch, jump to the end
     if the condition is false.  */
  if (!false_label_p)
    false_label_p = &end_label;

  /* We only want to emit these labels if we aren't hijacking them.  */
  emit_end = (end_label == NULL_TREE);
  emit_false = (false_label == NULL_TREE);

  /* We only emit the jump over the else clause if we have to--if the
     then clause may fall through.  Otherwise we can wind up with a
     useless jump and a useless label at the end of gimplified code,
     which will cause us to think that this conditional as a whole
     falls through even if it doesn't.  If we then inline a function
     which ends with such a condition, that can cause us to issue an
     inappropriate warning about control reaching the end of a
     non-void function.  */
  jump_over_else = block_may_fallthru (then_);

  pred = shortcut_cond_r (pred, true_label_p, false_label_p);

  expr = NULL;
  append_to_statement_list (pred, &expr);

  append_to_statement_list (then_, &expr);
  if (else_se)
    {
      if (jump_over_else)
        {
          t = build_and_jump (&end_label);
          append_to_statement_list (t, &expr);
        }
      if (emit_false)
        {
          t = build1 (LABEL_EXPR, void_type_node, false_label);
          append_to_statement_list (t, &expr);
        }
      append_to_statement_list (else_, &expr);
    }
  if (emit_end && end_label)
    {
      t = build1 (LABEL_EXPR, void_type_node, end_label);
      append_to_statement_list (t, &expr);
    }

  return expr;
}

/* EXPR is used in a boolean context; make sure it has BOOLEAN_TYPE.  */

static tree
gimple_boolify (tree expr)
{
  tree type = TREE_TYPE (expr);

  if (TREE_CODE (type) == BOOLEAN_TYPE)
    return expr;

  switch (TREE_CODE (expr))
    {
    case TRUTH_AND_EXPR:
    case TRUTH_OR_EXPR:
    case TRUTH_XOR_EXPR:
    case TRUTH_ANDIF_EXPR:
    case TRUTH_ORIF_EXPR:
      /* Also boolify the arguments of truth exprs.  */
      TREE_OPERAND (expr, 1) = gimple_boolify (TREE_OPERAND (expr, 1));
      /* FALLTHRU */

    case TRUTH_NOT_EXPR:
      TREE_OPERAND (expr, 0) = gimple_boolify (TREE_OPERAND (expr, 0));
      /* FALLTHRU */

    case EQ_EXPR: case NE_EXPR:
    case LE_EXPR: case GE_EXPR: case LT_EXPR: case GT_EXPR:
      /* These expressions always produce boolean results.  */
      TREE_TYPE (expr) = boolean_type_node;
      return expr;

    default:
      /* Other expressions that get here must have boolean values, but
         might need to be converted to the appropriate mode.  */
      return convert (boolean_type_node, expr);
    }
}

/*  Convert the conditional expression pointed to by EXPR_P '(p) ? a : b;'
    into

    if (p)                      if (p)
      t1 = a;                     a;
    else                or      else
      t1 = b;                     b;
    t1;

    The second form is used when *EXPR_P is of type void.

    TARGET is the tree for T1 above.

    PRE_P points to the list where side effects that must happen before
        *EXPR_P should be stored.

   POST_P points to the list where side effects that must happen after
     *EXPR_P should be stored.  */

static enum gimplify_status
gimplify_cond_expr (tree *expr_p, tree *pre_p, tree *post_p, tree target,
                    fallback_t fallback)
{
  tree expr = *expr_p;
  tree tmp, tmp2, type;
  enum gimplify_status ret;

  type = TREE_TYPE (expr);

  /* If this COND_EXPR has a value, copy the values into a temporary within
     the arms.  */
  if (! VOID_TYPE_P (type))
    {
      tree result;

      if (target)
        {
          ret = gimplify_expr (&target, pre_p, post_p,
                               is_gimple_min_lval, fb_lvalue);
          if (ret != GS_ERROR)
            ret = GS_OK;
          result = tmp = target;
          tmp2 = unshare_expr (target);
        }
      else if ((fallback & fb_lvalue) == 0)
        {
          result = tmp2 = tmp = create_tmp_var (TREE_TYPE (expr), "iftmp");
          ret = GS_ALL_DONE;
        }
      else
        {
          tree type = build_pointer_type (TREE_TYPE (expr));

          if (TREE_TYPE (TREE_OPERAND (expr, 1)) != void_type_node)
            TREE_OPERAND (expr, 1) =
              build_fold_addr_expr (TREE_OPERAND (expr, 1));

          if (TREE_TYPE (TREE_OPERAND (expr, 2)) != void_type_node)
            TREE_OPERAND (expr, 2) =
              build_fold_addr_expr (TREE_OPERAND (expr, 2));
          
          tmp2 = tmp = create_tmp_var (type, "iftmp");

          expr = build (COND_EXPR, void_type_node, TREE_OPERAND (expr, 0),
                        TREE_OPERAND (expr, 1), TREE_OPERAND (expr, 2));

          result = build_fold_indirect_ref (tmp);
          ret = GS_ALL_DONE;
        }

      /* Build the then clause, 't1 = a;'.  But don't build an assignment
         if this branch is void; in C++ it can be, if it's a throw.  */
      if (TREE_TYPE (TREE_OPERAND (expr, 1)) != void_type_node)
        TREE_OPERAND (expr, 1)
          = build (MODIFY_EXPR, void_type_node, tmp, TREE_OPERAND (expr, 1));

      /* Build the else clause, 't1 = b;'.  */
      if (TREE_TYPE (TREE_OPERAND (expr, 2)) != void_type_node)
        TREE_OPERAND (expr, 2)
          = build (MODIFY_EXPR, void_type_node, tmp2, TREE_OPERAND (expr, 2));

      TREE_TYPE (expr) = void_type_node;
      recalculate_side_effects (expr);

      /* Move the COND_EXPR to the prequeue.  */
      gimplify_and_add (expr, pre_p);

      *expr_p = result;
      return ret;
    }

  /* Make sure the condition has BOOLEAN_TYPE.  */
  TREE_OPERAND (expr, 0) = gimple_boolify (TREE_OPERAND (expr, 0));

  /* Break apart && and || conditions.  */
  if (TREE_CODE (TREE_OPERAND (expr, 0)) == TRUTH_ANDIF_EXPR
      || TREE_CODE (TREE_OPERAND (expr, 0)) == TRUTH_ORIF_EXPR)
    {
      expr = shortcut_cond_expr (expr);

      if (expr != *expr_p)
        {
          *expr_p = expr;

          /* We can't rely on gimplify_expr to re-gimplify the expanded
             form properly, as cleanups might cause the target labels to be
             wrapped in a TRY_FINALLY_EXPR.  To prevent that, we need to
             set up a conditional context.  */
          gimple_push_condition ();
          gimplify_stmt (expr_p);
          gimple_pop_condition (pre_p);

          return GS_ALL_DONE;
        }
    }

  /* Now do the normal gimplification.  */
  ret = gimplify_expr (&TREE_OPERAND (expr, 0), pre_p, NULL,
                       is_gimple_condexpr, fb_rvalue);

  gimple_push_condition ();

  gimplify_to_stmt_list (&TREE_OPERAND (expr, 1));
  gimplify_to_stmt_list (&TREE_OPERAND (expr, 2));
  recalculate_side_effects (expr);

  gimple_pop_condition (pre_p);

  if (ret == GS_ERROR)
    ;
  else if (TREE_SIDE_EFFECTS (TREE_OPERAND (expr, 1)))
    ret = GS_ALL_DONE;
  else if (TREE_SIDE_EFFECTS (TREE_OPERAND (expr, 2)))
    /* Rewrite "if (a); else b" to "if (!a) b"  */
    {
      TREE_OPERAND (expr, 0) = invert_truthvalue (TREE_OPERAND (expr, 0));
      ret = gimplify_expr (&TREE_OPERAND (expr, 0), pre_p, NULL,
                           is_gimple_condexpr, fb_rvalue);

      tmp = TREE_OPERAND (expr, 1);
      TREE_OPERAND (expr, 1) = TREE_OPERAND (expr, 2);
      TREE_OPERAND (expr, 2) = tmp;
    }
  else
    /* Both arms are empty; replace the COND_EXPR with its predicate.  */
    expr = TREE_OPERAND (expr, 0);

  *expr_p = expr;
  return ret;
}

/* A subroutine of gimplify_modify_expr.  Replace a MODIFY_EXPR with
   a call to __builtin_memcpy.  */

static enum gimplify_status
gimplify_modify_expr_to_memcpy (tree *expr_p, tree size, bool want_value)
{
  tree args, t, to, to_ptr, from;

  to = TREE_OPERAND (*expr_p, 0);
  from = TREE_OPERAND (*expr_p, 1);

  args = tree_cons (NULL, size, NULL);

  t = build_fold_addr_expr (from);
  args = tree_cons (NULL, t, args);

  to_ptr = build_fold_addr_expr (to);
  args = tree_cons (NULL, to_ptr, args);
  t = implicit_built_in_decls[BUILT_IN_MEMCPY];
  t = build_function_call_expr (t, args);

  if (want_value)
    {
      t = build1 (NOP_EXPR, TREE_TYPE (to_ptr), t);
      t = build1 (INDIRECT_REF, TREE_TYPE (to), t);
    }

  *expr_p = t;
  return GS_OK;
}

/* A subroutine of gimplify_modify_expr.  Replace a MODIFY_EXPR with
   a call to __builtin_memset.  In this case we know that the RHS is
   a CONSTRUCTOR with an empty element list.  */

static enum gimplify_status
gimplify_modify_expr_to_memset (tree *expr_p, tree size, bool want_value)
{
  tree args, t, to, to_ptr;

  to = TREE_OPERAND (*expr_p, 0);

  args = tree_cons (NULL, size, NULL);

  args = tree_cons (NULL, integer_zero_node, args);

  to_ptr = build_fold_addr_expr (to);
  args = tree_cons (NULL, to_ptr, args);
  t = implicit_built_in_decls[BUILT_IN_MEMSET];
  t = build_function_call_expr (t, args);

  if (want_value)
    {
      t = build1 (NOP_EXPR, TREE_TYPE (to_ptr), t);
      t = build1 (INDIRECT_REF, TREE_TYPE (to), t);
    }

  *expr_p = t;
  return GS_OK;
}

/* A subroutine of gimplify_init_ctor_preeval.  Called via walk_tree,
   determine, cautiously, if a CONSTRUCTOR overlaps the lhs of an
   assignment.  Returns non-null if we detect a potential overlap.  */

struct gimplify_init_ctor_preeval_data
{
  /* The base decl of the lhs object.  May be NULL, in which case we
     have to assume the lhs is indirect.  */
  tree lhs_base_decl;

  /* The alias set of the lhs object.  */
  int lhs_alias_set;
};

static tree
gimplify_init_ctor_preeval_1 (tree *tp, int *walk_subtrees, void *xdata)
{
  struct gimplify_init_ctor_preeval_data *data
    = (struct gimplify_init_ctor_preeval_data *) xdata;
  tree t = *tp;

  /* If we find the base object, obviously we have overlap.  */
  if (data->lhs_base_decl == t)
    return t;

  /* If the constructor component is indirect, determine if we have a
     potential overlap with the lhs.  The only bits of information we
     have to go on at this point are addressability and alias sets.  */
  if (TREE_CODE (t) == INDIRECT_REF
      && (!data->lhs_base_decl || TREE_ADDRESSABLE (data->lhs_base_decl))
      && alias_sets_conflict_p (data->lhs_alias_set, get_alias_set (t)))
    return t;

  if (IS_TYPE_OR_DECL_P (t))
    *walk_subtrees = 0;
  return NULL;
}

/* A subroutine of gimplify_init_constructor.  Pre-evaluate *EXPR_P,
   force values that overlap with the lhs (as described by *DATA)
   into temporaries.  */

static void
gimplify_init_ctor_preeval (tree *expr_p, tree *pre_p, tree *post_p,
                            struct gimplify_init_ctor_preeval_data *data)
{
  enum gimplify_status one;

  /* If the value is invariant, then there's nothing to pre-evaluate.
     But ensure it doesn't have any side-effects since a SAVE_EXPR is
     invariant but has side effects and might contain a reference to
     the object we're initializing.  */
  if (TREE_INVARIANT (*expr_p) && !TREE_SIDE_EFFECTS (*expr_p))
    return;

  /* If the type has non-trivial constructors, we can't pre-evaluate.  */
  if (TREE_ADDRESSABLE (TREE_TYPE (*expr_p)))
    return;

  /* Recurse for nested constructors.  */
  if (TREE_CODE (*expr_p) == CONSTRUCTOR)
    {
      unsigned HOST_WIDE_INT ix;
      constructor_elt *ce;
      VEC(constructor_elt,gc) *v = CONSTRUCTOR_ELTS (*expr_p);

      for (ix = 0; VEC_iterate (constructor_elt, v, ix, ce); ix++)
        gimplify_init_ctor_preeval (&ce->value, pre_p, post_p, data);
      return;
    }

  /* We can't preevaluate if the type contains a placeholder.  */
  if (type_contains_placeholder_p (TREE_TYPE (*expr_p)))
    return;

  /* Gimplify the constructor element to something appropriate for the rhs
     of a MODIFY_EXPR.  Given that we know the lhs is an aggregate, we know
     the gimplifier will consider this a store to memory.  Doing this
     gimplification now means that we won't have to deal with complicated
     language-specific trees, nor trees like SAVE_EXPR that can induce
     exponential search behavior.  */
  one = gimplify_expr (expr_p, pre_p, post_p, is_gimple_mem_rhs, fb_rvalue);
  if (one == GS_ERROR)
    {
      *expr_p = NULL;
      return;
    }

  /* If we gimplified to a bare decl, we can be sure that it doesn't overlap
     with the lhs, since "a = { .x=a }" doesn't make sense.  This will
     always be true for all scalars, since is_gimple_mem_rhs insists on a
     temporary variable for them.  */
  if (DECL_P (*expr_p))
    return;

  /* If this is of variable size, we have no choice but to assume it doesn't
     overlap since we can't make a temporary for it.  */
  if (!TREE_CONSTANT (TYPE_SIZE (TREE_TYPE (*expr_p))))
    return;

  /* Otherwise, we must search for overlap ...  */
  if (!walk_tree (expr_p, gimplify_init_ctor_preeval_1, data, NULL))
    return;

  /* ... and if found, force the value into a temporary.  */
  *expr_p = get_formal_tmp_var (*expr_p, pre_p);
}

/* A subroutine of gimplify_init_ctor_eval.  Create a loop for
   a RANGE_EXPR in a CONSTRUCTOR for an array.

      var = lower;
    loop_entry:
      object[var] = value;
      if (var == upper)
        goto loop_exit;
      var = var + 1;
      goto loop_entry;
    loop_exit:

   We increment var _after_ the loop exit check because we might otherwise
   fail if upper == TYPE_MAX_VALUE (type for upper).

   Note that we never have to deal with SAVE_EXPRs here, because this has
   already been taken care of for us, in gimplify_init_ctor_preeval().  */

static void gimplify_init_ctor_eval (tree, VEC(constructor_elt,gc) *,
                                     tree *, bool);

static void
gimplify_init_ctor_eval_range (tree object, tree lower, tree upper,
                               tree value, tree array_elt_type,
                               tree *pre_p, bool cleared)
{
  tree loop_entry_label, loop_exit_label;
  tree var, var_type, cref;

  loop_entry_label = create_artificial_label ();
  loop_exit_label = create_artificial_label ();

  /* Create and initialize the index variable.  */
  var_type = TREE_TYPE (upper);
  var = create_tmp_var (var_type, NULL);
  append_to_statement_list (build2 (MODIFY_EXPR, var_type, var, lower), pre_p);

  /* Add the loop entry label.  */
  append_to_statement_list (build1 (LABEL_EXPR,
                                    void_type_node,
                                    loop_entry_label),
                            pre_p);

  /* Build the reference.  */
  cref = build4 (ARRAY_REF, array_elt_type, unshare_expr (object),
                 var, NULL_TREE, NULL_TREE);

  /* If we are a constructor, just call gimplify_init_ctor_eval to do
     the store.  Otherwise just assign value to the reference.  */

  if (TREE_CODE (value) == CONSTRUCTOR)
    /* NB we might have to call ourself recursively through
       gimplify_init_ctor_eval if the value is a constructor.  */
    gimplify_init_ctor_eval (cref, CONSTRUCTOR_ELTS (value),
                             pre_p, cleared);
  else
    append_to_statement_list (build2 (MODIFY_EXPR, TREE_TYPE (cref),
                                      cref, value),
                              pre_p);

  /* We exit the loop when the index var is equal to the upper bound.  */
  gimplify_and_add (build3 (COND_EXPR, void_type_node,
                            build2 (EQ_EXPR, boolean_type_node,
                                    var, upper),
                            build1 (GOTO_EXPR,
                                    void_type_node,
                                    loop_exit_label),
                            NULL_TREE),
                    pre_p);

  /* Otherwise, increment the index var...  */
  append_to_statement_list (build2 (MODIFY_EXPR, var_type, var,
                                    build2 (PLUS_EXPR, var_type, var,
                                            fold_convert (var_type,
                                                          integer_one_node))),
                            pre_p);

  /* ...and jump back to the loop entry.  */
  append_to_statement_list (build1 (GOTO_EXPR,
                                    void_type_node,
                                    loop_entry_label),
                            pre_p);

  /* Add the loop exit label.  */
  append_to_statement_list (build1 (LABEL_EXPR,
                                    void_type_node,
                                    loop_exit_label),
                            pre_p);
}

/* Return true if FDECL is accessing a field that is zero sized.  */
   
static bool
zero_sized_field_decl (tree fdecl)
{
  if (TREE_CODE (fdecl) == FIELD_DECL && DECL_SIZE (fdecl) 
      && integer_zerop (DECL_SIZE (fdecl)))
    return true;
  return false;
}

/* A subroutine of gimplify_init_constructor.  Generate individual
   MODIFY_EXPRs for a CONSTRUCTOR.  OBJECT is the LHS against which the
   assignments should happen.  ELTS is the CONSTRUCTOR_ELTS of the
   CONSTRUCTOR.  CLEARED is true if the entire LHS object has been
   zeroed first.  */

static void
gimplify_init_ctor_eval (tree object, VEC(constructor_elt,gc) *elts,
                         tree *pre_p, bool cleared)
{
  tree array_elt_type = NULL;
  unsigned HOST_WIDE_INT ix;
  tree purpose, value;

  if (TREE_CODE (TREE_TYPE (object)) == ARRAY_TYPE)
    array_elt_type = TYPE_MAIN_VARIANT (TREE_TYPE (TREE_TYPE (object)));

  FOR_EACH_CONSTRUCTOR_ELT (elts, ix, purpose, value)
    {
      tree cref, init;

      /* NULL values are created above for gimplification errors.  */
      if (value == NULL)
        continue;

      if (cleared && initializer_zerop (value))
        continue;

      /* ??? Here's to hoping the front end fills in all of the indices,
         so we don't have to figure out what's missing ourselves.  */
      gcc_assert (purpose);

      if (zero_sized_field_decl (purpose))
        continue;

      /* If we have a RANGE_EXPR, we have to build a loop to assign the
         whole range.  */
      if (TREE_CODE (purpose) == RANGE_EXPR)
        {
          tree lower = TREE_OPERAND (purpose, 0);
          tree upper = TREE_OPERAND (purpose, 1);

          /* If the lower bound is equal to upper, just treat it as if
             upper was the index.  */
          if (simple_cst_equal (lower, upper))
            purpose = upper;
          else
            {
              gimplify_init_ctor_eval_range (object, lower, upper, value,
                                             array_elt_type, pre_p, cleared);
              continue;
            }
        }

      if (array_elt_type)
        {
          cref = build (ARRAY_REF, array_elt_type, unshare_expr (object),
                        purpose, NULL_TREE, NULL_TREE);
        }
      else
        cref = build (COMPONENT_REF, TREE_TYPE (purpose),
                      unshare_expr (object), purpose, NULL_TREE);

      if (TREE_CODE (value) == CONSTRUCTOR)
        gimplify_init_ctor_eval (cref, CONSTRUCTOR_ELTS (value),
                                 pre_p, cleared);
      else
        {
          init = build (MODIFY_EXPR, TREE_TYPE (cref), cref, value);
          gimplify_and_add (init, pre_p);
        }
    }
}

/* A subroutine of gimplify_modify_expr.  Break out elements of a
   CONSTRUCTOR used as an initializer into separate MODIFY_EXPRs.

   Note that we still need to clear any elements that don't have explicit
   initializers, so if not all elements are initialized we keep the
   original MODIFY_EXPR, we just remove all of the constructor elements.  */

static enum gimplify_status
gimplify_init_constructor (tree *expr_p, tree *pre_p,
                           tree *post_p, bool want_value)
{
  tree object;
  tree ctor = TREE_OPERAND (*expr_p, 1);
  tree type = TREE_TYPE (ctor);
  enum gimplify_status ret;
  VEC(constructor_elt,gc) *elts;

  if (TREE_CODE (ctor) != CONSTRUCTOR)
    return GS_UNHANDLED;

  ret = gimplify_expr (&TREE_OPERAND (*expr_p, 0), pre_p, post_p,
                       is_gimple_lvalue, fb_lvalue);
  if (ret == GS_ERROR)
    return ret;
  object = TREE_OPERAND (*expr_p, 0);

  elts = CONSTRUCTOR_ELTS (ctor);

  ret = GS_ALL_DONE;
  switch (TREE_CODE (type))
    {
    case RECORD_TYPE:
    case UNION_TYPE:
    case QUAL_UNION_TYPE:
    case ARRAY_TYPE:
      {
        struct gimplify_init_ctor_preeval_data preeval_data;
        HOST_WIDE_INT num_type_elements, num_ctor_elements;
        HOST_WIDE_INT num_nonzero_elements, num_nonconstant_elements;
        bool cleared;

        /* Aggregate types must lower constructors to initialization of
           individual elements.  The exception is that a CONSTRUCTOR node
           with no elements indicates zero-initialization of the whole.  */
        if (VEC_empty (constructor_elt, elts))
          break;

        categorize_ctor_elements (ctor, &num_nonzero_elements,
                                  &num_nonconstant_elements,
                                  &num_ctor_elements, &cleared);

        /* If a const aggregate variable is being initialized, then it
           should never be a lose to promote the variable to be static.  */
        if (num_nonconstant_elements == 0
            && num_nonzero_elements > 1
            && TREE_READONLY (object)
            && TREE_CODE (object) == VAR_DECL)
          {
            DECL_INITIAL (object) = ctor;
            TREE_STATIC (object) = 1;
            if (!DECL_NAME (object))
              DECL_NAME (object) = create_tmp_var_name ("C");
            walk_tree (&DECL_INITIAL (object), force_labels_r, NULL, NULL);

            /* ??? C++ doesn't automatically append a .<number> to the
               assembler name, and even when it does, it looks a FE private
               data structures to figure out what that number should be,
               which are not set for this variable.  I suppose this is
               important for local statics for inline functions, which aren't
               "local" in the object file sense.  So in order to get a unique
               TU-local symbol, we must invoke the lhd version now.  */
            lhd_set_decl_assembler_name (object);

            *expr_p = NULL_TREE;
            break;
          }

        /* If there are "lots" of initialized elements, even discounting
           those that are not address constants (and thus *must* be
           computed at runtime), then partition the constructor into
           constant and non-constant parts.  Block copy the constant
           parts in, then generate code for the non-constant parts.  */
        /* TODO.  There's code in cp/typeck.c to do this.  */

        num_type_elements = count_type_elements (TREE_TYPE (ctor));

        /* If there are "lots" of zeros, then block clear the object first.  */
        if (num_type_elements - num_nonzero_elements > CLEAR_RATIO
            && num_nonzero_elements < num_type_elements/4)
          cleared = true;

        /* ??? This bit ought not be needed.  For any element not present
           in the initializer, we should simply set them to zero.  Except
           we'd need to *find* the elements that are not present, and that
           requires trickery to avoid quadratic compile-time behavior in
           large cases or excessive memory use in small cases.  */
        else if (num_ctor_elements < num_type_elements)
          cleared = true;

        /* If there are "lots" of initialized elements, and all of them
           are valid address constants, then the entire initializer can
           be dropped to memory, and then memcpy'd out.  Don't do this
           for sparse arrays, though, as it's more efficient to follow
           the standard CONSTRUCTOR behavior of memset followed by
           individual element initialization.  */
        if (num_nonconstant_elements == 0 && !cleared)
          {
            HOST_WIDE_INT size = int_size_in_bytes (type);
            unsigned int align;

            /* ??? We can still get unbounded array types, at least
               from the C++ front end.  This seems wrong, but attempt
               to work around it for now.  */
            if (size < 0)
              {
                size = int_size_in_bytes (TREE_TYPE (object));
                if (size >= 0)
                  TREE_TYPE (ctor) = type = TREE_TYPE (object);
              }

            /* Find the maximum alignment we can assume for the object.  */
            /* ??? Make use of DECL_OFFSET_ALIGN.  */
            if (DECL_P (object))
              align = DECL_ALIGN (object);
            else
              align = TYPE_ALIGN (type);

            if (size > 0 && !can_move_by_pieces (size, align))
              {
                tree new = create_tmp_var_raw (type, "C");

                gimple_add_tmp_var (new);
                TREE_STATIC (new) = 1;
                TREE_READONLY (new) = 1;
                DECL_INITIAL (new) = ctor;
                if (align > DECL_ALIGN (new))
                  {
                    DECL_ALIGN (new) = align;
                    DECL_USER_ALIGN (new) = 1;
                  }
                walk_tree (&DECL_INITIAL (new), force_labels_r, NULL, NULL);

                TREE_OPERAND (*expr_p, 1) = new;

                /* This is no longer an assignment of a CONSTRUCTOR, but
                   we still may have processing to do on the LHS.  So
                   pretend we didn't do anything here to let that happen.  */
                return GS_UNHANDLED;
              }
          }

        if (cleared)
          {
            /* Zap the CONSTRUCTOR element list, which simplifies this case.
               Note that we still have to gimplify, in order to handle the
               case of variable sized types.  Avoid shared tree structures.  */
            CONSTRUCTOR_ELTS (ctor) = NULL;
            object = unshare_expr (object);
            gimplify_stmt (expr_p);
            append_to_statement_list (*expr_p, pre_p);
          }

        /* If we have not block cleared the object, or if there are nonzero
           elements in the constructor, add assignments to the individual
           scalar fields of the object.  */
        if (!cleared || num_nonzero_elements > 0)
          {
            preeval_data.lhs_base_decl = get_base_address (object);
            if (!DECL_P (preeval_data.lhs_base_decl))
              preeval_data.lhs_base_decl = NULL;
            preeval_data.lhs_alias_set = get_alias_set (object);

            gimplify_init_ctor_preeval (&TREE_OPERAND (*expr_p, 1),
                                        pre_p, post_p, &preeval_data);
            gimplify_init_ctor_eval (object, elts, pre_p, cleared);
          }

        *expr_p = NULL_TREE;
      }
      break;

    case COMPLEX_TYPE:
      {
        tree r, i;

        /* Extract the real and imaginary parts out of the ctor.  */
        gcc_assert (VEC_length (constructor_elt, elts) == 2);
        r = VEC_index (constructor_elt, elts, 0)->value;
        i = VEC_index (constructor_elt, elts, 1)->value;
        if (r == NULL || i == NULL)
          {
            tree zero = convert (TREE_TYPE (type), integer_zero_node);
            if (r == NULL)
              r = zero;
            if (i == NULL)
              i = zero;
          }

        /* Complex types have either COMPLEX_CST or COMPLEX_EXPR to
           represent creation of a complex value.  */
        if (TREE_CONSTANT (r) && TREE_CONSTANT (i))
          {
            ctor = build_complex (type, r, i);
            TREE_OPERAND (*expr_p, 1) = ctor;
          }
        else
          {
            ctor = build (COMPLEX_EXPR, type, r, i);
            TREE_OPERAND (*expr_p, 1) = ctor;
            ret = gimplify_expr (&TREE_OPERAND (*expr_p, 1), pre_p, post_p,
                                 rhs_predicate_for (TREE_OPERAND (*expr_p, 0)),
                                 fb_rvalue);
          }
      }
      break;

    case VECTOR_TYPE:
      {
        unsigned HOST_WIDE_INT ix;
        constructor_elt *ce;

        /* Go ahead and simplify constant constructors to VECTOR_CST.  */
        if (TREE_CONSTANT (ctor))
          {
            bool constant_p = true;
            tree value;

            /* Even when ctor is constant, it might contain non-*_CST
              elements (e.g. { 1.0/0.0 - 1.0/0.0, 0.0 }) and those don't
              belong into VECTOR_CST nodes.  */
            FOR_EACH_CONSTRUCTOR_VALUE (elts, ix, value)
              if (!CONSTANT_CLASS_P (value))
                {
                  constant_p = false;
                  break;
                }

            if (constant_p)
              {
                TREE_OPERAND (*expr_p, 1) = build_vector_from_ctor (type, elts);
                break;
              }
          }

        /* Vector types use CONSTRUCTOR all the way through gimple
          compilation as a general initializer.  */
        for (ix = 0; VEC_iterate (constructor_elt, elts, ix, ce); ix++)
          {
            enum gimplify_status tret;
            tret = gimplify_expr (&ce->value, pre_p, post_p,
                                  is_gimple_val, fb_rvalue);
            if (tret == GS_ERROR)
              ret = GS_ERROR;
          }
      }
      break;

    default:
      /* So how did we get a CONSTRUCTOR for a scalar type?  */
      gcc_unreachable ();
    }

  if (ret == GS_ERROR)
    return GS_ERROR;
  else if (want_value)
    {
      append_to_statement_list (*expr_p, pre_p);
      *expr_p = object;
      return GS_OK;
    }
  else
    return GS_ALL_DONE;
}

/* Given a pointer value OP0, return a simplified version of an
   indirection through OP0, or NULL_TREE if no simplification is
   possible.  This may only be applied to a rhs of an expression.
   Note that the resulting type may be different from the type pointed
   to in the sense that it is still compatible from the langhooks
   point of view. */

static tree
fold_indirect_ref_rhs (tree t)
{
  tree type = TREE_TYPE (TREE_TYPE (t));
  tree sub = t;
  tree subtype;

  STRIP_NOPS (sub);
  subtype = TREE_TYPE (sub);
  if (!POINTER_TYPE_P (subtype))
    return NULL_TREE;

  if (TREE_CODE (sub) == ADDR_EXPR)
    {
      tree op = TREE_OPERAND (sub, 0);
      tree optype = TREE_TYPE (op);
      /* *&p => p */
      if (lang_hooks.types_compatible_p (type, optype))
        return op;
      /* *(foo *)&fooarray => fooarray[0] */
      else if (TREE_CODE (optype) == ARRAY_TYPE
               && lang_hooks.types_compatible_p (type, TREE_TYPE (optype)))
       {
         tree type_domain = TYPE_DOMAIN (optype);
         tree min_val = size_zero_node;
         if (type_domain && TYPE_MIN_VALUE (type_domain))
           min_val = TYPE_MIN_VALUE (type_domain);
         return build4 (ARRAY_REF, type, op, min_val, NULL_TREE, NULL_TREE);
       }
    }

  /* *(foo *)fooarrptr => (*fooarrptr)[0] */
  if (TREE_CODE (TREE_TYPE (subtype)) == ARRAY_TYPE
      && lang_hooks.types_compatible_p (type, TREE_TYPE (TREE_TYPE (subtype))))
    {
      tree type_domain;
      tree min_val = size_zero_node;
      sub = fold_indirect_ref_rhs (sub);
      if (! sub)
        sub = build1 (INDIRECT_REF, TREE_TYPE (subtype), sub);
      type_domain = TYPE_DOMAIN (TREE_TYPE (sub));
      if (type_domain && TYPE_MIN_VALUE (type_domain))
        min_val = TYPE_MIN_VALUE (type_domain);
      return build4 (ARRAY_REF, type, sub, min_val, NULL_TREE, NULL_TREE);
    }

  return NULL_TREE;
}

/* Subroutine of gimplify_modify_expr to do simplifications of MODIFY_EXPRs
   based on the code of the RHS.  We loop for as long as something changes.  */

static enum gimplify_status
gimplify_modify_expr_rhs (tree *expr_p, tree *from_p, tree *to_p, tree *pre_p,
                          tree *post_p, bool want_value)
{
  enum gimplify_status ret = GS_OK;

  while (ret != GS_UNHANDLED)
    switch (TREE_CODE (*from_p))
      {
      case INDIRECT_REF:
        {
          /* If we have code like 

                *(const A*)(A*)&x

             where the type of "x" is a (possibly cv-qualified variant
             of "A"), treat the entire expression as identical to "x".
             This kind of code arises in C++ when an object is bound
             to a const reference, and if "x" is a TARGET_EXPR we want
             to take advantage of the optimization below.  */
          tree t = fold_indirect_ref_rhs (TREE_OPERAND (*from_p, 0));
          if (t)
            {
              *from_p = t;
              ret = GS_OK;
            }
          else
            ret = GS_UNHANDLED;
          break;
        }

      case TARGET_EXPR:
        {
          /* If we are initializing something from a TARGET_EXPR, strip the
             TARGET_EXPR and initialize it directly, if possible.  This can't
             be done if the initializer is void, since that implies that the
             temporary is set in some non-trivial way.

             ??? What about code that pulls out the temp and uses it
             elsewhere? I think that such code never uses the TARGET_EXPR as
             an initializer.  If I'm wrong, we'll die because the temp won't
             have any RTL.  In that case, I guess we'll need to replace
             references somehow.  */
          tree init = TARGET_EXPR_INITIAL (*from_p);

          if (!VOID_TYPE_P (TREE_TYPE (init)))
            {
              *from_p = init;
              ret = GS_OK;
            }
          else
            ret = GS_UNHANDLED;
        }
        break;

      case COMPOUND_EXPR:
        /* Remove any COMPOUND_EXPR in the RHS so the following cases will be
           caught.  */
        gimplify_compound_expr (from_p, pre_p, true);
        ret = GS_OK;
        break;

      case CONSTRUCTOR:
        /* If we're initializing from a CONSTRUCTOR, break this into
           individual MODIFY_EXPRs.  */
        return gimplify_init_constructor (expr_p, pre_p, post_p, want_value);

      case COND_EXPR:
        /* If we're assigning to a non-register type, push the assignment
           down into the branches.  This is mandatory for ADDRESSABLE types,
           since we cannot generate temporaries for such, but it saves a
           copy in other cases as well.  */
        if (!is_gimple_reg_type (TREE_TYPE (*from_p)))
          {
            *expr_p = *from_p;
            return gimplify_cond_expr (expr_p, pre_p, post_p, *to_p,
                                       fb_rvalue);
          }
        else
          ret = GS_UNHANDLED;
        break;

      case CALL_EXPR:
        /* For calls that return in memory, give *to_p as the CALL_EXPR's
           return slot so that we don't generate a temporary.  */
        if (!CALL_EXPR_RETURN_SLOT_OPT (*from_p)
            && aggregate_value_p (*from_p, *from_p))
          {
            bool use_target;

            if (TREE_CODE (*to_p) == RESULT_DECL
                && needs_to_live_in_memory (*to_p))
              /* It's always OK to use the return slot directly.  */
              use_target = true;
            else if (!is_gimple_non_addressable (*to_p))
              /* Don't use the original target if it's already addressable;
                 if its address escapes, and the called function uses the
                 NRV optimization, a conforming program could see *to_p
                 change before the called function returns; see c++/19317.
                 When optimizing, the return_slot pass marks more functions
                 as safe after we have escape info.  */
              use_target = false;
            else if (TREE_CODE (*to_p) != PARM_DECL 
                     && DECL_GIMPLE_FORMAL_TEMP_P (*to_p))
              /* Don't use the original target if it's a formal temp; we
                 don't want to take their addresses.  */
              use_target = false;
            else if (is_gimple_reg_type (TREE_TYPE (*to_p)))
              /* Also don't force regs into memory.  */
              use_target = false;
            else
              use_target = true;

            if (use_target)
              {
                CALL_EXPR_RETURN_SLOT_OPT (*from_p) = 1;
                lang_hooks.mark_addressable (*to_p);
              }
          }

        ret = GS_UNHANDLED;
        break;

      default:
        ret = GS_UNHANDLED;
        break;
      }

  return ret;
}

/* Promote partial stores to COMPLEX variables to total stores.  *EXPR_P is
   a MODIFY_EXPR with a lhs of a REAL/IMAGPART_EXPR of a variable with
   DECL_COMPLEX_GIMPLE_REG_P set.  */

static enum gimplify_status
gimplify_modify_expr_complex_part (tree *expr_p, tree *pre_p, bool want_value)
{
  enum tree_code code, ocode;
  tree lhs, rhs, new_rhs, other, realpart, imagpart;

  lhs = TREE_OPERAND (*expr_p, 0);
  rhs = TREE_OPERAND (*expr_p, 1);
  code = TREE_CODE (lhs);
  lhs = TREE_OPERAND (lhs, 0);

  ocode = code == REALPART_EXPR ? IMAGPART_EXPR : REALPART_EXPR;
  other = build1 (ocode, TREE_TYPE (rhs), lhs);
  other = get_formal_tmp_var (other, pre_p);

  realpart = code == REALPART_EXPR ? rhs : other;
  imagpart = code == REALPART_EXPR ? other : rhs;

  if (TREE_CONSTANT (realpart) && TREE_CONSTANT (imagpart))
    new_rhs = build_complex (TREE_TYPE (lhs), realpart, imagpart);
  else
    new_rhs = build2 (COMPLEX_EXPR, TREE_TYPE (lhs), realpart, imagpart);

  TREE_OPERAND (*expr_p, 0) = lhs;
  TREE_OPERAND (*expr_p, 1) = new_rhs;

  if (want_value)
    {
      append_to_statement_list (*expr_p, pre_p);
      *expr_p = rhs;
    }

  return GS_ALL_DONE;
}

/* Gimplify the MODIFY_EXPR node pointed to by EXPR_P.

      modify_expr
              : varname '=' rhs
              | '*' ID '=' rhs

    PRE_P points to the list where side effects that must happen before
        *EXPR_P should be stored.

    POST_P points to the list where side effects that must happen after
        *EXPR_P should be stored.

    WANT_VALUE is nonzero iff we want to use the value of this expression
        in another expression.  */

static enum gimplify_status
gimplify_modify_expr (tree *expr_p, tree *pre_p, tree *post_p, bool want_value)
{
  tree *from_p = &TREE_OPERAND (*expr_p, 1);
  tree *to_p = &TREE_OPERAND (*expr_p, 0);
  enum gimplify_status ret = GS_UNHANDLED;

  gcc_assert (TREE_CODE (*expr_p) == MODIFY_EXPR
              || TREE_CODE (*expr_p) == INIT_EXPR);

  /* The distinction between MODIFY_EXPR and INIT_EXPR is no longer useful.  */
  if (TREE_CODE (*expr_p) == INIT_EXPR)
    TREE_SET_CODE (*expr_p, MODIFY_EXPR);

  /* See if any simplifications can be done based on what the RHS is.  */
  ret = gimplify_modify_expr_rhs (expr_p, from_p, to_p, pre_p, post_p,
                                  want_value);
  if (ret != GS_UNHANDLED)
    return ret;

  /* If the value being copied is of variable width, compute the length
     of the copy into a WITH_SIZE_EXPR.   Note that we need to do this
     before gimplifying any of the operands so that we can resolve any
     PLACEHOLDER_EXPRs in the size.  Also note that the RTL expander uses
     the size of the expression to be copied, not of the destination, so
     that is what we must here.  */
  maybe_with_size_expr (from_p);

  ret = gimplify_expr (to_p, pre_p, post_p, is_gimple_lvalue, fb_lvalue);
  if (ret == GS_ERROR)
    return ret;

  ret = gimplify_expr (from_p, pre_p, post_p,
                       rhs_predicate_for (*to_p), fb_rvalue);
  if (ret == GS_ERROR)
    return ret;

  /* Now see if the above changed *from_p to something we handle specially.  */
  ret = gimplify_modify_expr_rhs (expr_p, from_p, to_p, pre_p, post_p,
                                  want_value);
  if (ret != GS_UNHANDLED)
    return ret;

  /* If we've got a variable sized assignment between two lvalues (i.e. does
     not involve a call), then we can make things a bit more straightforward
     by converting the assignment to memcpy or memset.  */
  if (TREE_CODE (*from_p) == WITH_SIZE_EXPR)
    {
      tree from = TREE_OPERAND (*from_p, 0);
      tree size = TREE_OPERAND (*from_p, 1);

      if (TREE_CODE (from) == CONSTRUCTOR)
        return gimplify_modify_expr_to_memset (expr_p, size, want_value);
      if (is_gimple_addressable (from))
        {
          *from_p = from;
          return gimplify_modify_expr_to_memcpy (expr_p, size, want_value);
        }
    }

  /* Transform partial stores to non-addressable complex variables into
     total stores.  This allows us to use real instead of virtual operands
     for these variables, which improves optimization.  */
  if ((TREE_CODE (*to_p) == REALPART_EXPR
       || TREE_CODE (*to_p) == IMAGPART_EXPR)
      && is_gimple_reg (TREE_OPERAND (*to_p, 0)))
    return gimplify_modify_expr_complex_part (expr_p, pre_p, want_value);

  if (gimplify_ctxp->into_ssa && is_gimple_reg (*to_p))
    {
      /* If we've somehow already got an SSA_NAME on the LHS, then
         we're probably modified it twice.  Not good.  */
      gcc_assert (TREE_CODE (*to_p) != SSA_NAME);
      *to_p = make_ssa_name (*to_p, *expr_p);
    }

  if (want_value)
    {
      append_to_statement_list (*expr_p, pre_p);
      *expr_p = *to_p;
      return GS_OK;
    }

  return GS_ALL_DONE;
}

/*  Gimplify a comparison between two variable-sized objects.  Do this
    with a call to BUILT_IN_MEMCMP.  */

static enum gimplify_status
gimplify_variable_sized_compare (tree *expr_p)
{
  tree op0 = TREE_OPERAND (*expr_p, 0);
  tree op1 = TREE_OPERAND (*expr_p, 1);
  tree args, t, dest;

  t = TYPE_SIZE_UNIT (TREE_TYPE (op0));
  t = unshare_expr (t);
  t = SUBSTITUTE_PLACEHOLDER_IN_EXPR (t, op0);
  args = tree_cons (NULL, t, NULL);
  t = build_fold_addr_expr (op1);
  args = tree_cons (NULL, t, args);
  dest = build_fold_addr_expr (op0);
  args = tree_cons (NULL, dest, args);
  t = implicit_built_in_decls[BUILT_IN_MEMCMP];
  t = build_function_call_expr (t, args);
  *expr_p
    = build (TREE_CODE (*expr_p), TREE_TYPE (*expr_p), t, integer_zero_node);

  return GS_OK;
}

/*  Gimplify TRUTH_ANDIF_EXPR and TRUTH_ORIF_EXPR expressions.  EXPR_P
    points to the expression to gimplify.

    Expressions of the form 'a && b' are gimplified to:

        a && b ? true : false

    gimplify_cond_expr will do the rest.

    PRE_P points to the list where side effects that must happen before
        *EXPR_P should be stored.  */

static enum gimplify_status
gimplify_boolean_expr (tree *expr_p)
{
  /* Preserve the original type of the expression.  */
  tree type = TREE_TYPE (*expr_p);

  *expr_p = build (COND_EXPR, type, *expr_p,
                   convert (type, boolean_true_node),
                   convert (type, boolean_false_node));

  return GS_OK;
}

/* Gimplifies an expression sequence.  This function gimplifies each
   expression and re-writes the original expression with the last
   expression of the sequence in GIMPLE form.

   PRE_P points to the list where the side effects for all the
       expressions in the sequence will be emitted.

   WANT_VALUE is true when the result of the last COMPOUND_EXPR is used.  */
/* ??? Should rearrange to share the pre-queue with all the indirect
   invocations of gimplify_expr.  Would probably save on creations
   of statement_list nodes.  */

static enum gimplify_status
gimplify_compound_expr (tree *expr_p, tree *pre_p, bool want_value)
{
  tree t = *expr_p;

  do
    {
      tree *sub_p = &TREE_OPERAND (t, 0);

      if (TREE_CODE (*sub_p) == COMPOUND_EXPR)
        gimplify_compound_expr (sub_p, pre_p, false);
      else
        gimplify_stmt (sub_p);
      append_to_statement_list (*sub_p, pre_p);

      t = TREE_OPERAND (t, 1);
    }
  while (TREE_CODE (t) == COMPOUND_EXPR);

  *expr_p = t;
  if (want_value)
    return GS_OK;
  else
    {
      gimplify_stmt (expr_p);
      return GS_ALL_DONE;
    }
}

/* Gimplifies a statement list.  These may be created either by an
   enlightened front-end, or by shortcut_cond_expr.  */

static enum gimplify_status
gimplify_statement_list (tree *expr_p)
{
  tree_stmt_iterator i = tsi_start (*expr_p);

  while (!tsi_end_p (i))
    {
      tree t;

      gimplify_stmt (tsi_stmt_ptr (i));

      t = tsi_stmt (i);
      if (t == NULL)
        tsi_delink (&i);
      else if (TREE_CODE (t) == STATEMENT_LIST)
        {
          tsi_link_before (&i, t, TSI_SAME_STMT);
          tsi_delink (&i);
        }
      else
        tsi_next (&i);
    }

  return GS_ALL_DONE;
}

/*  Gimplify a SAVE_EXPR node.  EXPR_P points to the expression to
    gimplify.  After gimplification, EXPR_P will point to a new temporary
    that holds the original value of the SAVE_EXPR node.

    PRE_P points to the list where side effects that must happen before
        *EXPR_P should be stored.  */

static enum gimplify_status
gimplify_save_expr (tree *expr_p, tree *pre_p, tree *post_p)
{
  enum gimplify_status ret = GS_ALL_DONE;
  tree val;

  gcc_assert (TREE_CODE (*expr_p) == SAVE_EXPR);
  val = TREE_OPERAND (*expr_p, 0);

  /* If the SAVE_EXPR has not been resolved, then evaluate it once.  */
  if (!SAVE_EXPR_RESOLVED_P (*expr_p))
    {
      /* The operand may be a void-valued expression such as SAVE_EXPRs
         generated by the Java frontend for class initialization.  It is
         being executed only for its side-effects.  */
      if (TREE_TYPE (val) == void_type_node)
        {
          ret = gimplify_expr (&TREE_OPERAND (*expr_p, 0), pre_p, post_p,
                               is_gimple_stmt, fb_none);
          append_to_statement_list (TREE_OPERAND (*expr_p, 0), pre_p);
          val = NULL;
        }
      else
        val = get_initialized_tmp_var (val, pre_p, post_p);

      TREE_OPERAND (*expr_p, 0) = val;
      SAVE_EXPR_RESOLVED_P (*expr_p) = 1;
    }

  *expr_p = val;

  return ret;
}

/*  Re-write the ADDR_EXPR node pointed to by EXPR_P

      unary_expr
              : ...
              | '&' varname
              ...

    PRE_P points to the list where side effects that must happen before
        *EXPR_P should be stored.

    POST_P points to the list where side effects that must happen after
        *EXPR_P should be stored.  */

static enum gimplify_status
gimplify_addr_expr (tree *expr_p, tree *pre_p, tree *post_p)
{
  tree expr = *expr_p;
  tree op0 = TREE_OPERAND (expr, 0);
  enum gimplify_status ret;

  switch (TREE_CODE (op0))
    {
    case INDIRECT_REF:
    case MISALIGNED_INDIRECT_REF:
    do_indirect_ref:
      /* Check if we are dealing with an expression of the form '&*ptr'.
         While the front end folds away '&*ptr' into 'ptr', these
         expressions may be generated internally by the compiler (e.g.,
         builtins like __builtin_va_end).  */
      /* Caution: the silent array decomposition semantics we allow for
         ADDR_EXPR means we can't always discard the pair.  */
      /* Gimplification of the ADDR_EXPR operand may drop
         cv-qualification conversions, so make sure we add them if
         needed.  */
      {
        tree op00 = TREE_OPERAND (op0, 0);
        tree t_expr = TREE_TYPE (expr);
        tree t_op00 = TREE_TYPE (op00);

        if (!lang_hooks.types_compatible_p (t_expr, t_op00))
          {
#ifdef ENABLE_CHECKING
            tree t_op0 = TREE_TYPE (op0);
            gcc_assert (POINTER_TYPE_P (t_expr)
                        && cpt_same_type (TREE_CODE (t_op0) == ARRAY_TYPE
                                          ? TREE_TYPE (t_op0) : t_op0,
                                          TREE_TYPE (t_expr))
                        && POINTER_TYPE_P (t_op00)
                        && cpt_same_type (t_op0, TREE_TYPE (t_op00)));
#endif
            op00 = fold_convert (TREE_TYPE (expr), op00);
          }
        *expr_p = op00;
        ret = GS_OK;
      }
      break;

    case VIEW_CONVERT_EXPR:
      /* Take the address of our operand and then convert it to the type of
         this ADDR_EXPR.

         ??? The interactions of VIEW_CONVERT_EXPR and aliasing is not at
         all clear.  The impact of this transformation is even less clear.  */

      /* If the operand is a useless conversion, look through it.  Doing so
         guarantees that the ADDR_EXPR and its operand will remain of the
         same type.  */
      if (tree_ssa_useless_type_conversion (TREE_OPERAND (op0, 0)))
        op0 = TREE_OPERAND (op0, 0);

      *expr_p = fold_convert (TREE_TYPE (expr),
                              build_fold_addr_expr (TREE_OPERAND (op0, 0)));
      ret = GS_OK;
      break;

    default:
      /* We use fb_either here because the C frontend sometimes takes
         the address of a call that returns a struct; see
         gcc.dg/c99-array-lval-1.c.  The gimplifier will correctly make
         the implied temporary explicit.  */
      ret = gimplify_expr (&TREE_OPERAND (expr, 0), pre_p, post_p,
                           is_gimple_addressable, fb_either);
      if (ret != GS_ERROR)
        {
          op0 = TREE_OPERAND (expr, 0);

          /* For various reasons, the gimplification of the expression
             may have made a new INDIRECT_REF.  */
          if (TREE_CODE (op0) == INDIRECT_REF)
            goto do_indirect_ref;

          /* Make sure TREE_INVARIANT, TREE_CONSTANT, and TREE_SIDE_EFFECTS
             is set properly.  */
          recompute_tree_invarant_for_addr_expr (expr);

          /* Mark the RHS addressable.  */
          lang_hooks.mark_addressable (TREE_OPERAND (expr, 0));
        }
      break;
    }

  return ret;
}

/* Gimplify the operands of an ASM_EXPR.  Input operands should be a gimple
   value; output operands should be a gimple lvalue.  */

static enum gimplify_status
gimplify_asm_expr (tree *expr_p, tree *pre_p, tree *post_p)
{
  tree expr = *expr_p;
  int noutputs = list_length (ASM_OUTPUTS (expr));
  const char **oconstraints
    = (const char **) alloca ((noutputs) * sizeof (const char *));
  int i;
  tree link;
  const char *constraint;
  bool allows_mem, allows_reg, is_inout;
  enum gimplify_status ret, tret;

  ret = GS_ALL_DONE;
  for (i = 0, link = ASM_OUTPUTS (expr); link; ++i, link = TREE_CHAIN (link))
    {
      size_t constraint_len;
      oconstraints[i] = constraint
        = TREE_STRING_POINTER (TREE_VALUE (TREE_PURPOSE (link)));
      constraint_len = strlen (constraint);
      if (constraint_len == 0)
        continue;

      parse_output_constraint (&constraint, i, 0, 0,
                               &allows_mem, &allows_reg, &is_inout);

      if (!allows_reg && allows_mem)
        lang_hooks.mark_addressable (TREE_VALUE (link));

      tret = gimplify_expr (&TREE_VALUE (link), pre_p, post_p,
                            is_inout ? is_gimple_min_lval : is_gimple_lvalue,
                            fb_lvalue | fb_mayfail);
      if (tret == GS_ERROR)
        {
          error ("invalid lvalue in asm output %d", i);
          ret = tret;
        }

      if (is_inout)
        {
          /* An input/output operand.  To give the optimizers more
             flexibility, split it into separate input and output
             operands.  */
          tree input;
          char buf[10];

          /* Turn the in/out constraint into an output constraint.  */
          char *p = xstrdup (constraint);
          p[0] = '=';
          TREE_VALUE (TREE_PURPOSE (link)) = build_string (constraint_len, p);

          /* And add a matching input constraint.  */
          if (allows_reg)
            {
              sprintf (buf, "%d", i);

              /* If there are multiple alternatives in the constraint,
                 handle each of them individually.  Those that allow register
                 will be replaced with operand number, the others will stay
                 unchanged.  */
              if (strchr (p, ',') != NULL)
                {
                  size_t len = 0, buflen = strlen (buf);
                  char *beg, *end, *str, *dst;

                  for (beg = p + 1;;)
                    {
                      end = strchr (beg, ',');
                      if (end == NULL)
                        end = strchr (beg, '\0');
                      if ((size_t) (end - beg) < buflen)
                        len += buflen + 1;
                      else
                        len += end - beg + 1;
                      if (*end)
                        beg = end + 1;
                      else
                        break;
                    }

                  str = alloca (len);
                  for (beg = p + 1, dst = str;;)
                    {
                      const char *tem;
                      bool mem_p, reg_p, inout_p;

                      end = strchr (beg, ',');
                      if (end)
                        *end = '\0';
                      beg[-1] = '=';
                      tem = beg - 1;
                      parse_output_constraint (&tem, i, 0, 0,
                                               &mem_p, &reg_p, &inout_p);
                      if (dst != str)
                        *dst++ = ',';
                      if (reg_p)
                        {
                          memcpy (dst, buf, buflen);
                          dst += buflen;
                        }
                      else
                        {
                          if (end)
                            len = end - beg;
                          else
                            len = strlen (beg);
                          memcpy (dst, beg, len);
                          dst += len;
                        }
                      if (end)
                        beg = end + 1;
                      else
                        break;
                    }
                  *dst = '\0';
                  input = build_string (dst - str, str);
                }
              else
                input = build_string (strlen (buf), buf);
            }
          else
            input = build_string (constraint_len - 1, constraint + 1);

          free (p);

          input = build_tree_list (build_tree_list (NULL_TREE, input),
                                   unshare_expr (TREE_VALUE (link)));
          ASM_INPUTS (expr) = chainon (ASM_INPUTS (expr), input);
        }
    }

  for (link = ASM_INPUTS (expr); link; ++i, link = TREE_CHAIN (link))
    {
      constraint
        = TREE_STRING_POINTER (TREE_VALUE (TREE_PURPOSE (link)));
      parse_input_constraint (&constraint, 0, 0, noutputs, 0,
                              oconstraints, &allows_mem, &allows_reg);

      /* If the operand is a memory input, it should be an lvalue.  */
      if (!allows_reg && allows_mem)
        {
          lang_hooks.mark_addressable (TREE_VALUE (link));
          tret = gimplify_expr (&TREE_VALUE (link), pre_p, post_p,
                                is_gimple_lvalue, fb_lvalue | fb_mayfail);
          if (tret == GS_ERROR)
            {
              error ("memory input %d is not directly addressable", i);
              ret = tret;
            }
        }
      else
        {
          tret = gimplify_expr (&TREE_VALUE (link), pre_p, post_p,
                                is_gimple_asm_val, fb_rvalue);
          if (tret == GS_ERROR)
            ret = tret;
        }
    }

  return ret;
}

/* Gimplify a CLEANUP_POINT_EXPR.  Currently this works by adding
   WITH_CLEANUP_EXPRs to the prequeue as we encounter cleanups while
   gimplifying the body, and converting them to TRY_FINALLY_EXPRs when we
   return to this function.

   FIXME should we complexify the prequeue handling instead?  Or use flags
   for all the cleanups and let the optimizer tighten them up?  The current
   code seems pretty fragile; it will break on a cleanup within any
   non-conditional nesting.  But any such nesting would be broken, anyway;
   we can't write a TRY_FINALLY_EXPR that starts inside a nesting construct
   and continues out of it.  We can do that at the RTL level, though, so
   having an optimizer to tighten up try/finally regions would be a Good
   Thing.  */

static enum gimplify_status
gimplify_cleanup_point_expr (tree *expr_p, tree *pre_p)
{
  tree_stmt_iterator iter;
  tree body;

  tree temp = voidify_wrapper_expr (*expr_p, NULL);

  /* We only care about the number of conditions between the innermost
     CLEANUP_POINT_EXPR and the cleanup.  So save and reset the count.  */
  int old_conds = gimplify_ctxp->conditions;
  gimplify_ctxp->conditions = 0;

  body = TREE_OPERAND (*expr_p, 0);
  gimplify_to_stmt_list (&body);

  gimplify_ctxp->conditions = old_conds;

  for (iter = tsi_start (body); !tsi_end_p (iter); )
    {
      tree *wce_p = tsi_stmt_ptr (iter);
      tree wce = *wce_p;

      if (TREE_CODE (wce) == WITH_CLEANUP_EXPR)
        {
          if (tsi_one_before_end_p (iter))
            {
              tsi_link_before (&iter, TREE_OPERAND (wce, 0), TSI_SAME_STMT);
              tsi_delink (&iter);
              break;
            }
          else
            {
              tree sl, tfe;
              enum tree_code code;

              if (CLEANUP_EH_ONLY (wce))
                code = TRY_CATCH_EXPR;
              else
                code = TRY_FINALLY_EXPR;

              sl = tsi_split_statement_list_after (&iter);
              tfe = build (code, void_type_node, sl, NULL_TREE);
              append_to_statement_list (TREE_OPERAND (wce, 0),
                                        &TREE_OPERAND (tfe, 1));
              *wce_p = tfe;
              iter = tsi_start (sl);
            }
        }
      else
        tsi_next (&iter);
    }

  if (temp)
    {
      *expr_p = temp;
      append_to_statement_list (body, pre_p);
      return GS_OK;
    }
  else
    {
      *expr_p = body;
      return GS_ALL_DONE;
    }
}

/* Insert a cleanup marker for gimplify_cleanup_point_expr.  CLEANUP
   is the cleanup action required.  */

static void
gimple_push_cleanup (tree var, tree cleanup, bool eh_only, tree *pre_p)
{
  tree wce;

  /* Errors can result in improperly nested cleanups.  Which results in
     confusion when trying to resolve the WITH_CLEANUP_EXPR.  */
  if (errorcount || sorrycount)
    return;

  if (gimple_conditional_context ())
    {
      /* If we're in a conditional context, this is more complex.  We only
         want to run the cleanup if we actually ran the initialization that
         necessitates it, but we want to run it after the end of the
         conditional context.  So we wrap the try/finally around the
         condition and use a flag to determine whether or not to actually
         run the destructor.  Thus

           test ? f(A()) : 0

         becomes (approximately)

           flag = 0;
           try {
             if (test) { A::A(temp); flag = 1; val = f(temp); }
             else { val = 0; }
           } finally {
             if (flag) A::~A(temp);
           }
           val
      */

      tree flag = create_tmp_var (boolean_type_node, "cleanup");
      tree ffalse = build (MODIFY_EXPR, void_type_node, flag,
                           boolean_false_node);
      tree ftrue = build (MODIFY_EXPR, void_type_node, flag,
                          boolean_true_node);
      cleanup = build (COND_EXPR, void_type_node, flag, cleanup, NULL);
      wce = build (WITH_CLEANUP_EXPR, void_type_node, cleanup);
      append_to_statement_list (ffalse, &gimplify_ctxp->conditional_cleanups);
      append_to_statement_list (wce, &gimplify_ctxp->conditional_cleanups);
      append_to_statement_list (ftrue, pre_p);

      /* Because of this manipulation, and the EH edges that jump
         threading cannot redirect, the temporary (VAR) will appear
         to be used uninitialized.  Don't warn.  */
      TREE_NO_WARNING (var) = 1;
    }
  else
    {
      wce = build (WITH_CLEANUP_EXPR, void_type_node, cleanup);
      CLEANUP_EH_ONLY (wce) = eh_only;
      append_to_statement_list (wce, pre_p);
    }

  gimplify_stmt (&TREE_OPERAND (wce, 0));
}

/* Gimplify a TARGET_EXPR which doesn't appear on the rhs of an INIT_EXPR.  */

static enum gimplify_status
gimplify_target_expr (tree *expr_p, tree *pre_p, tree *post_p)
{
  tree targ = *expr_p;
  tree temp = TARGET_EXPR_SLOT (targ);
  tree init = TARGET_EXPR_INITIAL (targ);
  enum gimplify_status ret;

  if (init)
    {
      /* TARGET_EXPR temps aren't part of the enclosing block, so add it
         to the temps list.  */
      gimple_add_tmp_var (temp);

      /* If TARGET_EXPR_INITIAL is void, then the mere evaluation of the
         expression is supposed to initialize the slot.  */
      if (VOID_TYPE_P (TREE_TYPE (init)))
        ret = gimplify_expr (&init, pre_p, post_p, is_gimple_stmt, fb_none);
      else
        {
          /* Special handling for BIND_EXPR can result in fewer temps.  */
          ret = GS_OK;
          if (TREE_CODE (init) == BIND_EXPR)
            gimplify_bind_expr (&init, temp, pre_p);
          if (init != temp)
            {
              init = build (MODIFY_EXPR, void_type_node, temp, init);
              ret = gimplify_expr (&init, pre_p, post_p, is_gimple_stmt,
                                   fb_none);
            }
        }
      if (ret == GS_ERROR)
        return GS_ERROR;
      append_to_statement_list (init, pre_p);

      /* If needed, push the cleanup for the temp.  */
      if (TARGET_EXPR_CLEANUP (targ))
        {
          gimplify_stmt (&TARGET_EXPR_CLEANUP (targ));
          gimple_push_cleanup (temp, TARGET_EXPR_CLEANUP (targ),
                               CLEANUP_EH_ONLY (targ), pre_p);
        }

      /* Only expand this once.  */
      TREE_OPERAND (targ, 3) = init;
      TARGET_EXPR_INITIAL (targ) = NULL_TREE;
    }
  else
    /* We should have expanded this before.  */
    gcc_assert (DECL_SEEN_IN_BIND_EXPR_P (temp));

  *expr_p = temp;
  return GS_OK;
}

/* Gimplification of expression trees.  */

/* Gimplify an expression which appears at statement context; usually, this
   means replacing it with a suitably gimple STATEMENT_LIST.  */

void
gimplify_stmt (tree *stmt_p)
{
  gimplify_expr (stmt_p, NULL, NULL, is_gimple_stmt, fb_none);
}

/* Similarly, but force the result to be a STATEMENT_LIST.  */

void
gimplify_to_stmt_list (tree *stmt_p)
{
  gimplify_stmt (stmt_p);
  if (!*stmt_p)
    *stmt_p = alloc_stmt_list ();
  else if (TREE_CODE (*stmt_p) != STATEMENT_LIST)
    {
      tree t = *stmt_p;
      *stmt_p = alloc_stmt_list ();
      append_to_statement_list (t, stmt_p);
    }
}


/*  Gimplifies the expression tree pointed to by EXPR_P.  Return 0 if
    gimplification failed.

    PRE_P points to the list where side effects that must happen before
        EXPR should be stored.

    POST_P points to the list where side effects that must happen after
        EXPR should be stored, or NULL if there is no suitable list.  In
        that case, we copy the result to a temporary, emit the
        post-effects, and then return the temporary.

    GIMPLE_TEST_F points to a function that takes a tree T and
        returns nonzero if T is in the GIMPLE form requested by the
        caller.  The GIMPLE predicates are in tree-gimple.c.

        This test is used twice.  Before gimplification, the test is
        invoked to determine whether *EXPR_P is already gimple enough.  If
        that fails, *EXPR_P is gimplified according to its code and
        GIMPLE_TEST_F is called again.  If the test still fails, then a new
        temporary variable is created and assigned the value of the
        gimplified expression.

    FALLBACK tells the function what sort of a temporary we want.  If the 1
        bit is set, an rvalue is OK.  If the 2 bit is set, an lvalue is OK.
        If both are set, either is OK, but an lvalue is preferable.

    The return value is either GS_ERROR or GS_ALL_DONE, since this function
    iterates until solution.  */

enum gimplify_status
gimplify_expr (tree *expr_p, tree *pre_p, tree *post_p,
               bool (* gimple_test_f) (tree), fallback_t fallback)
{
  tree tmp;
  tree internal_pre = NULL_TREE;
  tree internal_post = NULL_TREE;
  tree save_expr;
  int is_statement = (pre_p == NULL);
  location_t saved_location;
  enum gimplify_status ret;

  save_expr = *expr_p;
  if (save_expr == NULL_TREE)
    return GS_ALL_DONE;

  /* We used to check the predicate here and return immediately if it
     succeeds.  This is wrong; the design is for gimplification to be
     idempotent, and for the predicates to only test for valid forms, not
     whether they are fully simplified.  */

  /* Set up our internal queues if needed.  */
  if (pre_p == NULL)
    pre_p = &internal_pre;
  if (post_p == NULL)
    post_p = &internal_post;

  saved_location = input_location;
  if (save_expr != error_mark_node
      && EXPR_HAS_LOCATION (*expr_p))
    input_location = EXPR_LOCATION (*expr_p);

  /* Loop over the specific gimplifiers until the toplevel node
     remains the same.  */
  do
    {
      /* Strip away as many useless type conversions as possible
         at the toplevel.  */
      STRIP_USELESS_TYPE_CONVERSION (*expr_p);

      /* Remember the expr.  */
      save_expr = *expr_p;

      /* Die, die, die, my darling.  */
      if (save_expr == error_mark_node
          || (TREE_TYPE (save_expr)
              && TREE_TYPE (save_expr) == error_mark_node))
        {
          ret = GS_ERROR;
          break;
        }

      /* Do any language-specific gimplification.  */
      ret = lang_hooks.gimplify_expr (expr_p, pre_p, post_p);
      if (ret == GS_OK)
        {
          if (*expr_p == NULL_TREE)
            break;
          if (*expr_p != save_expr)
            continue;
        }
      else if (ret != GS_UNHANDLED)
        break;

      ret = GS_OK;
      switch (TREE_CODE (*expr_p))
        {
          /* First deal with the special cases.  */

        case POSTINCREMENT_EXPR:
        case POSTDECREMENT_EXPR:
        case PREINCREMENT_EXPR:
        case PREDECREMENT_EXPR:
          ret = gimplify_self_mod_expr (expr_p, pre_p, post_p,
                                        fallback != fb_none);
          break;

        case ARRAY_REF:
        case ARRAY_RANGE_REF:
        case REALPART_EXPR:
        case IMAGPART_EXPR:
        case COMPONENT_REF:
        case VIEW_CONVERT_EXPR:
          ret = gimplify_compound_lval (expr_p, pre_p, post_p,
                                        fallback ? fallback : fb_rvalue);
          break;

        case COND_EXPR:
          ret = gimplify_cond_expr (expr_p, pre_p, post_p, NULL_TREE,
                                    fallback);
          /* C99 code may assign to an array in a structure value of a
             conditional expression, and this has undefined behavior
             only on execution, so create a temporary if an lvalue is
             required.  */
          if (fallback == fb_lvalue)
            {
              *expr_p = get_initialized_tmp_var (*expr_p, pre_p, post_p);
              lang_hooks.mark_addressable (*expr_p);
            }
          break;

        case CALL_EXPR:
          ret = gimplify_call_expr (expr_p, pre_p, fallback != fb_none);
          /* C99 code may assign to an array in a structure returned
             from a function, and this has undefined behavior only on
             execution, so create a temporary if an lvalue is
             required.  */
          if (fallback == fb_lvalue)
            {
              *expr_p = get_initialized_tmp_var (*expr_p, pre_p, post_p);
              lang_hooks.mark_addressable (*expr_p);
            }
          break;

        case TREE_LIST:
          gcc_unreachable ();

        case COMPOUND_EXPR:
          ret = gimplify_compound_expr (expr_p, pre_p, fallback != fb_none);
          break;

        case MODIFY_EXPR:
        case INIT_EXPR:
          ret = gimplify_modify_expr (expr_p, pre_p, post_p,
                                      fallback != fb_none);
          break;

        case TRUTH_ANDIF_EXPR:
        case TRUTH_ORIF_EXPR:
          ret = gimplify_boolean_expr (expr_p);
          break;

        case TRUTH_NOT_EXPR:
          TREE_OPERAND (*expr_p, 0)
            = gimple_boolify (TREE_OPERAND (*expr_p, 0));
          ret = gimplify_expr (&TREE_OPERAND (*expr_p, 0), pre_p, post_p,
                               is_gimple_val, fb_rvalue);
          recalculate_side_effects (*expr_p);
          break;

        case ADDR_EXPR:
          ret = gimplify_addr_expr (expr_p, pre_p, post_p);
          break;

        case VA_ARG_EXPR:
          ret = gimplify_va_arg_expr (expr_p, pre_p, post_p);
          break;

        case CONVERT_EXPR:
        case NOP_EXPR:
          if (IS_EMPTY_STMT (*expr_p))
            {
              ret = GS_ALL_DONE;
              break;
            }

          if (VOID_TYPE_P (TREE_TYPE (*expr_p))
              || fallback == fb_none)
            {
              /* Just strip a conversion to void (or in void context) and
                 try again.  */
              *expr_p = TREE_OPERAND (*expr_p, 0);
              break;
            }

          ret = gimplify_conversion (expr_p);
          if (ret == GS_ERROR)
            break;
          if (*expr_p != save_expr)
            break;
          /* FALLTHRU */

        case FIX_TRUNC_EXPR:
        case FIX_CEIL_EXPR:
        case FIX_FLOOR_EXPR:
        case FIX_ROUND_EXPR:
          /* unary_expr: ... | '(' cast ')' val | ...  */
          ret = gimplify_expr (&TREE_OPERAND (*expr_p, 0), pre_p, post_p,
                               is_gimple_val, fb_rvalue);
          recalculate_side_effects (*expr_p);
          break;

        case INDIRECT_REF:
          *expr_p = fold_indirect_ref (*expr_p);
          if (*expr_p != save_expr)
            break;
          /* else fall through.  */
        case ALIGN_INDIRECT_REF:
        case MISALIGNED_INDIRECT_REF:
          ret = gimplify_expr (&TREE_OPERAND (*expr_p, 0), pre_p, post_p,
                               is_gimple_reg, fb_rvalue);
          recalculate_side_effects (*expr_p);
          break;

          /* Constants need not be gimplified.  */
        case INTEGER_CST:
        case REAL_CST:
        case STRING_CST:
        case COMPLEX_CST:
        case VECTOR_CST:
          ret = GS_ALL_DONE;
          break;

        case CONST_DECL:
          /* If we require an lvalue, such as for ADDR_EXPR, retain the
             CONST_DECL node.  Otherwise the decl is replaceable by its
             value.  */
          /* ??? Should be == fb_lvalue, but ADDR_EXPR passes fb_either.  */
          if (fallback & fb_lvalue)
            ret = GS_ALL_DONE;
          else
            *expr_p = DECL_INITIAL (*expr_p);
          break;

        case DECL_EXPR:
          ret = gimplify_decl_expr (expr_p);
          break;

        case EXC_PTR_EXPR:
          /* FIXME make this a decl.  */
          ret = GS_ALL_DONE;
          break;

        case BIND_EXPR:
          ret = gimplify_bind_expr (expr_p, NULL, pre_p);
          break;

        case LOOP_EXPR:
          ret = gimplify_loop_expr (expr_p, pre_p);
          break;

        case SWITCH_EXPR:
          ret = gimplify_switch_expr (expr_p, pre_p);
          break;

        case EXIT_EXPR:
          ret = gimplify_exit_expr (expr_p);
          break;

        case GOTO_EXPR:
          /* If the target is not LABEL, then it is a computed jump
             and the target needs to be gimplified.  */
          if (TREE_CODE (GOTO_DESTINATION (*expr_p)) != LABEL_DECL)
            ret = gimplify_expr (&GOTO_DESTINATION (*expr_p), pre_p,
                                 NULL, is_gimple_val, fb_rvalue);
          break;

        case LABEL_EXPR:
          ret = GS_ALL_DONE;
          gcc_assert (decl_function_context (LABEL_EXPR_LABEL (*expr_p))
                      == current_function_decl);
          break;

        case CASE_LABEL_EXPR:
          ret = gimplify_case_label_expr (expr_p);
          break;

        case RETURN_EXPR:
          ret = gimplify_return_expr (*expr_p, pre_p);
          break;

        case CONSTRUCTOR:
          /* Don't reduce this in place; let gimplify_init_constructor work its
             magic.  Buf if we're just elaborating this for side effects, just
             gimplify any element that has side-effects.  */
          if (fallback == fb_none)
            {
              unsigned HOST_WIDE_INT ix;
              constructor_elt *ce;
              for (ix = 0;
                   VEC_iterate (constructor_elt, CONSTRUCTOR_ELTS (*expr_p),
                                ix, ce);
                   ix++)
                if (TREE_SIDE_EFFECTS (ce->value))
                  gimplify_expr (&ce->value, pre_p, post_p,
                                 gimple_test_f, fallback);

              *expr_p = NULL_TREE;
            }

          ret = GS_ALL_DONE;
          break;

          /* The following are special cases that are not handled by the
             original GIMPLE grammar.  */

          /* SAVE_EXPR nodes are converted into a GIMPLE identifier and
             eliminated.  */
        case SAVE_EXPR:
          ret = gimplify_save_expr (expr_p, pre_p, post_p);
          break;

        case BIT_FIELD_REF:
          {
            enum gimplify_status r0, r1, r2;

            r0 = gimplify_expr (&TREE_OPERAND (*expr_p, 0), pre_p, post_p,
                                is_gimple_lvalue, fb_either);
            r1 = gimplify_expr (&TREE_OPERAND (*expr_p, 1), pre_p, post_p,
                                is_gimple_val, fb_rvalue);
            r2 = gimplify_expr (&TREE_OPERAND (*expr_p, 2), pre_p, post_p,
                                is_gimple_val, fb_rvalue);
            recalculate_side_effects (*expr_p);

            ret = MIN (r0, MIN (r1, r2));
          }
          break;

        case NON_LVALUE_EXPR:
          /* This should have been stripped above.  */
          gcc_unreachable ();

        case ASM_EXPR:
          ret = gimplify_asm_expr (expr_p, pre_p, post_p);
          break;

        case TRY_FINALLY_EXPR:
        case TRY_CATCH_EXPR:
          gimplify_to_stmt_list (&TREE_OPERAND (*expr_p, 0));
          gimplify_to_stmt_list (&TREE_OPERAND (*expr_p, 1));
          ret = GS_ALL_DONE;
          break;

        case CLEANUP_POINT_EXPR:
          ret = gimplify_cleanup_point_expr (expr_p, pre_p);
          break;

        case TARGET_EXPR:
          ret = gimplify_target_expr (expr_p, pre_p, post_p);
          break;

        case CATCH_EXPR:
          gimplify_to_stmt_list (&CATCH_BODY (*expr_p));
          ret = GS_ALL_DONE;
          break;

        case EH_FILTER_EXPR:
          gimplify_to_stmt_list (&EH_FILTER_FAILURE (*expr_p));
          ret = GS_ALL_DONE;
          break;

        case OBJ_TYPE_REF:
          {
            enum gimplify_status r0, r1;
            r0 = gimplify_expr (&OBJ_TYPE_REF_OBJECT (*expr_p), pre_p, post_p,
                                is_gimple_val, fb_rvalue);
            r1 = gimplify_expr (&OBJ_TYPE_REF_EXPR (*expr_p), pre_p, post_p,
                                is_gimple_val, fb_rvalue);
            ret = MIN (r0, r1);
          }
          break;

        case LABEL_DECL:
          /* We get here when taking the address of a label.  We mark
             the label as "forced"; meaning it can never be removed and
             it is a potential target for any computed goto.  */
          FORCED_LABEL (*expr_p) = 1;
          ret = GS_ALL_DONE;
          break;

        case STATEMENT_LIST:
          ret = gimplify_statement_list (expr_p);
          break;

        case WITH_SIZE_EXPR:
          {
            gimplify_expr (&TREE_OPERAND (*expr_p, 0), pre_p,
                           post_p == &internal_post ? NULL : post_p,
                           gimple_test_f, fallback);
            gimplify_expr (&TREE_OPERAND (*expr_p, 1), pre_p, post_p,
                           is_gimple_val, fb_rvalue);
          }
          break;

        case VAR_DECL:
          /* ??? If this is a local variable, and it has not been seen in any
             outer BIND_EXPR, then it's probably the result of a duplicate
             declaration, for which we've already issued an error.  It would
             be really nice if the front end wouldn't leak these at all.
             Currently the only known culprit is C++ destructors, as seen
             in g++.old-deja/g++.jason/binding.C.  */
          tmp = *expr_p;
          if (!TREE_STATIC (tmp) && !DECL_EXTERNAL (tmp)
              && decl_function_context (tmp) == current_function_decl
              && !DECL_SEEN_IN_BIND_EXPR_P (tmp))
            {
              gcc_assert (errorcount || sorrycount);
              ret = GS_ERROR;
              break;
            }
          /* FALLTHRU */

        case PARM_DECL:
          tmp = *expr_p;

          /* If this is a local variable sized decl, it must be accessed
             indirectly.  Perform that substitution.  */
          if (DECL_HAS_VALUE_EXPR_P (tmp))
            {
              *expr_p = unshare_expr (DECL_VALUE_EXPR (tmp));
              ret = GS_OK;
              break;
            }

          ret = GS_ALL_DONE;
          break;

        case SSA_NAME:
          /* Allow callbacks into the gimplifier during optimization.  */
          ret = GS_ALL_DONE;
          break;

        default:
          switch (TREE_CODE_CLASS (TREE_CODE (*expr_p)))
            {
            case tcc_comparison:
              /* If this is a comparison of objects of aggregate type,
                 handle it specially (by converting to a call to
                 memcmp).  It would be nice to only have to do this
                 for variable-sized objects, but then we'd have to
                 allow the same nest of reference nodes we allow for
                 MODIFY_EXPR and that's too complex.  */
              if (!AGGREGATE_TYPE_P (TREE_TYPE (TREE_OPERAND (*expr_p, 1))))
                goto expr_2;
              ret = gimplify_variable_sized_compare (expr_p);
              break;

            /* If *EXPR_P does not need to be special-cased, handle it
               according to its class.  */
            case tcc_unary:
              ret = gimplify_expr (&TREE_OPERAND (*expr_p, 0), pre_p,
                                   post_p, is_gimple_val, fb_rvalue);
              break;

            case tcc_binary:
            expr_2:
              {
                enum gimplify_status r0, r1;

                r0 = gimplify_expr (&TREE_OPERAND (*expr_p, 0), pre_p,
                                    post_p, is_gimple_val, fb_rvalue);
                r1 = gimplify_expr (&TREE_OPERAND (*expr_p, 1), pre_p,
                                    post_p, is_gimple_val, fb_rvalue);

                ret = MIN (r0, r1);
                break;
              }

            case tcc_declaration:
            case tcc_constant:
              ret = GS_ALL_DONE;
              goto dont_recalculate;

            default:
              gcc_assert (TREE_CODE (*expr_p) == TRUTH_AND_EXPR
                          || TREE_CODE (*expr_p) == TRUTH_OR_EXPR
                          || TREE_CODE (*expr_p) == TRUTH_XOR_EXPR);
              goto expr_2;
            }

          recalculate_side_effects (*expr_p);
        dont_recalculate:
          break;
        }

      /* If we replaced *expr_p, gimplify again.  */
      if (ret == GS_OK && (*expr_p == NULL || *expr_p == save_expr))
        ret = GS_ALL_DONE;
    }
  while (ret == GS_OK);

  /* If we encountered an error_mark somewhere nested inside, either
     stub out the statement or propagate the error back out.  */
  if (ret == GS_ERROR)
    {
      if (is_statement)
        *expr_p = NULL;
      goto out;
    }

  /* This was only valid as a return value from the langhook, which
     we handled.  Make sure it doesn't escape from any other context.  */
  gcc_assert (ret != GS_UNHANDLED);

  if (fallback == fb_none && *expr_p && !is_gimple_stmt (*expr_p))
    {
      /* We aren't looking for a value, and we don't have a valid
         statement.  If it doesn't have side-effects, throw it away.  */
      if (!TREE_SIDE_EFFECTS (*expr_p))
        *expr_p = NULL;
      else if (!TREE_THIS_VOLATILE (*expr_p))
        {
          /* This is probably a _REF that contains something nested that
             has side effects.  Recurse through the operands to find it.  */
          enum tree_code code = TREE_CODE (*expr_p);

          switch (code)
            {
            case COMPONENT_REF:
            case REALPART_EXPR: case IMAGPART_EXPR:
              gimplify_expr (&TREE_OPERAND (*expr_p, 0), pre_p, post_p,
                             gimple_test_f, fallback);
              break;

            case ARRAY_REF: case ARRAY_RANGE_REF:
              gimplify_expr (&TREE_OPERAND (*expr_p, 0), pre_p, post_p,
                             gimple_test_f, fallback);
              gimplify_expr (&TREE_OPERAND (*expr_p, 1), pre_p, post_p,
                             gimple_test_f, fallback);
              break;

            default:
               /* Anything else with side-effects must be converted to
                  a valid statement before we get here.  */
              gcc_unreachable ();
            }

          *expr_p = NULL;
        }
      else if (COMPLETE_TYPE_P (TREE_TYPE (*expr_p)))
        {
          /* Historically, the compiler has treated a bare
             reference to a volatile lvalue as forcing a load.  */
          tree type = TYPE_MAIN_VARIANT (TREE_TYPE (*expr_p));
          tree tmp = create_tmp_var (type, "vol");
          *expr_p = build (MODIFY_EXPR, type, tmp, *expr_p);
        }
      else
        /* We can't do anything useful with a volatile reference to
           incomplete type, so just throw it away.  */
        *expr_p = NULL;
    }

  /* If we are gimplifying at the statement level, we're done.  Tack
     everything together and replace the original statement with the
     gimplified form.  */
  if (fallback == fb_none || is_statement)
    {
      if (internal_pre || internal_post)
        {
          append_to_statement_list (*expr_p, &internal_pre);
          append_to_statement_list (internal_post, &internal_pre);
          annotate_all_with_locus (&internal_pre, input_location);
          *expr_p = internal_pre;
        }
      else if (!*expr_p)
        ;
      else if (TREE_CODE (*expr_p) == STATEMENT_LIST)
        annotate_all_with_locus (expr_p, input_location);
      else
        annotate_one_with_locus (*expr_p, input_location);
      goto out;
    }

  /* Otherwise we're gimplifying a subexpression, so the resulting value is
     interesting.  */

  /* If it's sufficiently simple already, we're done.  Unless we are
     handling some post-effects internally; if that's the case, we need to
     copy into a temp before adding the post-effects to the tree.  */
  if (!internal_post && (*gimple_test_f) (*expr_p))
    goto out;

  /* Otherwise, we need to create a new temporary for the gimplified
     expression.  */

  /* We can't return an lvalue if we have an internal postqueue.  The
     object the lvalue refers to would (probably) be modified by the
     postqueue; we need to copy the value out first, which means an
     rvalue.  */
  if ((fallback & fb_lvalue) && !internal_post
      && is_gimple_addressable (*expr_p))
    {
      /* An lvalue will do.  Take the address of the expression, store it
         in a temporary, and replace the expression with an INDIRECT_REF of
         that temporary.  */
      tmp = build_fold_addr_expr (*expr_p);
      gimplify_expr (&tmp, pre_p, post_p, is_gimple_reg, fb_rvalue);
      *expr_p = build1 (INDIRECT_REF, TREE_TYPE (TREE_TYPE (tmp)), tmp);
    }
  else if ((fallback & fb_rvalue) && is_gimple_formal_tmp_rhs (*expr_p))
    {
      gcc_assert (!VOID_TYPE_P (TREE_TYPE (*expr_p)));

      /* An rvalue will do.  Assign the gimplified expression into a new
         temporary TMP and replace the original expression with TMP.  */

      if (internal_post || (fallback & fb_lvalue))
        /* The postqueue might change the value of the expression between
           the initialization and use of the temporary, so we can't use a
           formal temp.  FIXME do we care?  */
        *expr_p = get_initialized_tmp_var (*expr_p, pre_p, post_p);
      else
        *expr_p = get_formal_tmp_var (*expr_p, pre_p);

      if (TREE_CODE (*expr_p) != SSA_NAME)
        DECL_GIMPLE_FORMAL_TEMP_P (*expr_p) = 1;
    }
  else
    {
#ifdef ENABLE_CHECKING
      if (!(fallback & fb_mayfail))
        {
          fprintf (stderr, "gimplification failed:\n");
          print_generic_expr (stderr, *expr_p, 0);
          debug_tree (*expr_p);
          internal_error ("gimplification failed");
        }
#endif
      gcc_assert (fallback & fb_mayfail);
      /* If this is an asm statement, and the user asked for the
         impossible, don't die.  Fail and let gimplify_asm_expr
         issue an error.  */
      ret = GS_ERROR;
      goto out;
    }

  /* Make sure the temporary matches our predicate.  */
  gcc_assert ((*gimple_test_f) (*expr_p));

  if (internal_post)
    {
      annotate_all_with_locus (&internal_post, input_location);
      append_to_statement_list (internal_post, pre_p);
    }

 out:
  input_location = saved_location;
  return ret;
}

/* Look through TYPE for variable-sized objects and gimplify each such
   size that we find.  Add to LIST_P any statements generated.  */

void
gimplify_type_sizes (tree type, tree *list_p)
{
  tree field, t;

  if (type == NULL || type == error_mark_node)
    return;

  /* We first do the main variant, then copy into any other variants.  */
  type = TYPE_MAIN_VARIANT (type);

  /* Avoid infinite recursion.  */
  if (TYPE_SIZES_GIMPLIFIED (type))
    return;

  TYPE_SIZES_GIMPLIFIED (type) = 1;

  switch (TREE_CODE (type))
    {
    case INTEGER_TYPE:
    case ENUMERAL_TYPE:
    case BOOLEAN_TYPE:
    case CHAR_TYPE:
    case REAL_TYPE:
      gimplify_one_sizepos (&TYPE_MIN_VALUE (type), list_p);
      gimplify_one_sizepos (&TYPE_MAX_VALUE (type), list_p);

      for (t = TYPE_NEXT_VARIANT (type); t; t = TYPE_NEXT_VARIANT (t))
        {
          TYPE_MIN_VALUE (t) = TYPE_MIN_VALUE (type);
          TYPE_MAX_VALUE (t) = TYPE_MAX_VALUE (type);
        }
      break;

    case ARRAY_TYPE:
      /* These types may not have declarations, so handle them here.  */
      gimplify_type_sizes (TREE_TYPE (type), list_p);
      gimplify_type_sizes (TYPE_DOMAIN (type), list_p);
      break;

    case RECORD_TYPE:
    case UNION_TYPE:
    case QUAL_UNION_TYPE:
      for (field = TYPE_FIELDS (type); field; field = TREE_CHAIN (field))
        if (TREE_CODE (field) == FIELD_DECL)
          {
            gimplify_one_sizepos (&DECL_FIELD_OFFSET (field), list_p);
            gimplify_type_sizes (TREE_TYPE (field), list_p);
          }
      break;

    case POINTER_TYPE:
    case REFERENCE_TYPE:
      gimplify_type_sizes (TREE_TYPE (type), list_p);
      break;

    default:
      break;
    }

  gimplify_one_sizepos (&TYPE_SIZE (type), list_p);
  gimplify_one_sizepos (&TYPE_SIZE_UNIT (type), list_p);

  for (t = TYPE_NEXT_VARIANT (type); t; t = TYPE_NEXT_VARIANT (t))
    {
      TYPE_SIZE (t) = TYPE_SIZE (type);
      TYPE_SIZE_UNIT (t) = TYPE_SIZE_UNIT (type);
      TYPE_SIZES_GIMPLIFIED (t) = 1;
    }
}

/* A subroutine of gimplify_type_sizes to make sure that *EXPR_P,
   a size or position, has had all of its SAVE_EXPRs evaluated.
   We add any required statements to STMT_P.  */

void
gimplify_one_sizepos (tree *expr_p, tree *stmt_p)
{
  tree type, expr = *expr_p;

  /* We don't do anything if the value isn't there, is constant, or contains
     A PLACEHOLDER_EXPR.  We also don't want to do anything if it's already
     a VAR_DECL.  If it's a VAR_DECL from another function, the gimplifier
     will want to replace it with a new variable, but that will cause problems
     if this type is from outside the function.  It's OK to have that here.  */
  if (expr == NULL_TREE || TREE_CONSTANT (expr)
      || TREE_CODE (expr) == VAR_DECL
      || CONTAINS_PLACEHOLDER_P (expr))
    return;

  type = TREE_TYPE (expr);
  *expr_p = unshare_expr (expr);

  gimplify_expr (expr_p, stmt_p, NULL, is_gimple_val, fb_rvalue);
  expr = *expr_p;

  /* Verify that we've an exact type match with the original expression.
     In particular, we do not wish to drop a "sizetype" in favour of a
     type of similar dimensions.  We don't want to pollute the generic
     type-stripping code with this knowledge because it doesn't matter
     for the bulk of GENERIC/GIMPLE.  It only matters that TYPE_SIZE_UNIT
     and friends retain their "sizetype-ness".  */
  if (TREE_TYPE (expr) != type
      && TREE_CODE (type) == INTEGER_TYPE
      && TYPE_IS_SIZETYPE (type))
    {
      tree tmp;

      *expr_p = create_tmp_var (type, NULL);
      tmp = build1 (NOP_EXPR, type, expr);
      tmp = build2 (MODIFY_EXPR, type, *expr_p, expr);
      if (EXPR_HAS_LOCATION (expr))
        SET_EXPR_LOCUS (tmp, EXPR_LOCUS (expr));
      else
        SET_EXPR_LOCATION (tmp, input_location);

      gimplify_and_add (tmp, stmt_p);
    }
}
\f
#ifdef ENABLE_CHECKING
/* Compare types A and B for a "close enough" match.  */

static bool
cpt_same_type (tree a, tree b)
{
  if (lang_hooks.types_compatible_p (a, b))
    return true;

  /* ??? The C++ FE decomposes METHOD_TYPES to FUNCTION_TYPES and doesn't
     link them together.  This routine is intended to catch type errors
     that will affect the optimizers, and the optimizers don't add new
     dereferences of function pointers, so ignore it.  */
  if ((TREE_CODE (a) == FUNCTION_TYPE || TREE_CODE (a) == METHOD_TYPE)
      && (TREE_CODE (b) == FUNCTION_TYPE || TREE_CODE (b) == METHOD_TYPE))
    return true;

  /* ??? The C FE pushes type qualifiers after the fact into the type of
     the element from the type of the array.  See build_unary_op's handling
     of ADDR_EXPR.  This seems wrong -- if we were going to do this, we
     should have done it when creating the variable in the first place.
     Alternately, why aren't the two array types made variants?  */
  if (TREE_CODE (a) == ARRAY_TYPE && TREE_CODE (b) == ARRAY_TYPE)
    return cpt_same_type (TREE_TYPE (a), TREE_TYPE (b));

  /* And because of those, we have to recurse down through pointers.  */
  if (POINTER_TYPE_P (a) && POINTER_TYPE_P (b))
    return cpt_same_type (TREE_TYPE (a), TREE_TYPE (b));

  return false;
}

/* Check for some cases of the front end missing cast expressions.
   The type of a dereference should correspond to the pointer type;
   similarly the type of an address should match its object.  */

static tree
check_pointer_types_r (tree *tp, int *walk_subtrees ATTRIBUTE_UNUSED,
                       void *data ATTRIBUTE_UNUSED)
{
  tree t = *tp;
  tree ptype, otype, dtype;

  switch (TREE_CODE (t))
    {
    case INDIRECT_REF:
    case ARRAY_REF:
      otype = TREE_TYPE (t);
      ptype = TREE_TYPE (TREE_OPERAND (t, 0));
      dtype = TREE_TYPE (ptype);
      gcc_assert (cpt_same_type (otype, dtype));
      break;

    case ADDR_EXPR:
      ptype = TREE_TYPE (t);
      otype = TREE_TYPE (TREE_OPERAND (t, 0));
      dtype = TREE_TYPE (ptype);
      if (!cpt_same_type (otype, dtype))
        {
          /* &array is allowed to produce a pointer to the element, rather than
             a pointer to the array type.  We must allow this in order to
             properly represent assigning the address of an array in C into
             pointer to the element type.  */
          gcc_assert (TREE_CODE (otype) == ARRAY_TYPE
                      && POINTER_TYPE_P (ptype)
                      && cpt_same_type (TREE_TYPE (otype), dtype));
          break;
        }
      break;

    default:
      return NULL_TREE;
    }


  return NULL_TREE;
}
#endif

/* Gimplify the body of statements pointed to by BODY_P.  FNDECL is the
   function decl containing BODY.  */

void
gimplify_body (tree *body_p, tree fndecl, bool do_parms)
{
  location_t saved_location = input_location;
  tree body, parm_stmts;

  timevar_push (TV_TREE_GIMPLIFY);
  push_gimplify_context ();

  /* Unshare most shared trees in the body and in that of any nested functions.
     It would seem we don't have to do this for nested functions because
     they are supposed to be output and then the outer function gimplified
     first, but the g++ front end doesn't always do it that way.  */
  unshare_body (body_p, fndecl);
  unvisit_body (body_p, fndecl);

  /* Make sure input_location isn't set to something wierd.  */
  input_location = DECL_SOURCE_LOCATION (fndecl);

  /* Resolve callee-copies.  This has to be done before processing
     the body so that DECL_VALUE_EXPR gets processed correctly.  */
  parm_stmts = do_parms ? gimplify_parameters () : NULL;

  /* Gimplify the function's body.  */
  gimplify_stmt (body_p);
  body = *body_p;

  if (!body)
    body = alloc_stmt_list ();
  else if (TREE_CODE (body) == STATEMENT_LIST)
    {
      tree t = expr_only (*body_p);
      if (t)
        body = t;
    }

  /* If there isn't an outer BIND_EXPR, add one.  */
  if (TREE_CODE (body) != BIND_EXPR)
    {
      tree b = build (BIND_EXPR, void_type_node, NULL_TREE,
                      NULL_TREE, NULL_TREE);
      TREE_SIDE_EFFECTS (b) = 1;
      append_to_statement_list_force (body, &BIND_EXPR_BODY (b));
      body = b;
    }

  /* If we had callee-copies statements, insert them at the beginning
     of the function.  */
  if (parm_stmts)
    {
      append_to_statement_list_force (BIND_EXPR_BODY (body), &parm_stmts);
      BIND_EXPR_BODY (body) = parm_stmts;
    }

  /* Unshare again, in case gimplification was sloppy.  */
  unshare_all_trees (body);

  *body_p = body;

  pop_gimplify_context (body);

#ifdef ENABLE_CHECKING
  walk_tree (body_p, check_pointer_types_r, NULL, NULL);
#endif

  timevar_pop (TV_TREE_GIMPLIFY);
  input_location = saved_location;
}

/* Entry point to the gimplification pass.  FNDECL is the FUNCTION_DECL
   node for the function we want to gimplify.  */

void
gimplify_function_tree (tree fndecl)
{
  tree oldfn, parm, ret;

  oldfn = current_function_decl;
  current_function_decl = fndecl;
  cfun = DECL_STRUCT_FUNCTION (fndecl);
  if (cfun == NULL)
    allocate_struct_function (fndecl);

  for (parm = DECL_ARGUMENTS (fndecl); parm ; parm = TREE_CHAIN (parm))
    {
      /* Preliminarily mark non-addressed complex variables as eligible
         for promotion to gimple registers.  We'll transform their uses
         as we find them.  */
      if (TREE_CODE (TREE_TYPE (parm)) == COMPLEX_TYPE
          && !TREE_THIS_VOLATILE (parm)
          && !needs_to_live_in_memory (parm))
        DECL_COMPLEX_GIMPLE_REG_P (parm) = 1;
    }

  ret = DECL_RESULT (fndecl);
  if (TREE_CODE (TREE_TYPE (ret)) == COMPLEX_TYPE
      && !needs_to_live_in_memory (ret))
    DECL_COMPLEX_GIMPLE_REG_P (ret) = 1;

  gimplify_body (&DECL_SAVED_TREE (fndecl), fndecl, true);

  /* If we're instrumenting function entry/exit, then prepend the call to
     the entry hook and wrap the whole function in a TRY_FINALLY_EXPR to
     catch the exit hook.  */
  /* ??? Add some way to ignore exceptions for this TFE.  */
  if (flag_instrument_function_entry_exit
      && ! DECL_NO_INSTRUMENT_FUNCTION_ENTRY_EXIT (fndecl))
    {
      tree tf, x, bind;

      tf = build (TRY_FINALLY_EXPR, void_type_node, NULL, NULL);
      TREE_SIDE_EFFECTS (tf) = 1;
      x = DECL_SAVED_TREE (fndecl);
      append_to_statement_list (x, &TREE_OPERAND (tf, 0));
      x = implicit_built_in_decls[BUILT_IN_PROFILE_FUNC_EXIT];
      x = build_function_call_expr (x, NULL);
      append_to_statement_list (x, &TREE_OPERAND (tf, 1));

      bind = build (BIND_EXPR, void_type_node, NULL, NULL, NULL);
      TREE_SIDE_EFFECTS (bind) = 1;
      x = implicit_built_in_decls[BUILT_IN_PROFILE_FUNC_ENTER];
      x = build_function_call_expr (x, NULL);
      append_to_statement_list (x, &BIND_EXPR_BODY (bind));
      append_to_statement_list (tf, &BIND_EXPR_BODY (bind));

      DECL_SAVED_TREE (fndecl) = bind;
    }

  current_function_decl = oldfn;
  cfun = oldfn ? DECL_STRUCT_FUNCTION (oldfn) : NULL;
}

\f
/* Expands EXPR to list of gimple statements STMTS.  If SIMPLE is true,
   force the result to be either ssa_name or an invariant, otherwise
   just force it to be a rhs expression.  If VAR is not NULL, make the
   base variable of the final destination be VAR if suitable.  */

tree
force_gimple_operand (tree expr, tree *stmts, bool simple, tree var)
{
  tree t;
  enum gimplify_status ret;
  gimple_predicate gimple_test_f;

  *stmts = NULL_TREE;

  if (is_gimple_val (expr))
    return expr;

  gimple_test_f = simple ? is_gimple_val : is_gimple_reg_rhs;

  push_gimplify_context ();
  gimplify_ctxp->into_ssa = in_ssa_p;

  if (var)
    expr = build (MODIFY_EXPR, TREE_TYPE (var), var, expr);

  ret = gimplify_expr (&expr, stmts, NULL,
                       gimple_test_f, fb_rvalue);
  gcc_assert (ret != GS_ERROR);

  if (referenced_vars)
    {
      for (t = gimplify_ctxp->temps; t ; t = TREE_CHAIN (t))
        add_referenced_tmp_var (t);
    }

  pop_gimplify_context (NULL);

  return expr;
}

/* Invokes force_gimple_operand for EXPR with parameters SIMPLE_P and VAR.  If
   some statements are produced, emits them before BSI.  */

tree
force_gimple_operand_bsi (block_stmt_iterator *bsi, tree expr,
                          bool simple_p, tree var)
{
  tree stmts;

  expr = force_gimple_operand (expr, &stmts, simple_p, var);
  if (stmts)
    bsi_insert_before (bsi, stmts, BSI_SAME_STMT);

  return expr;
}

#include "gt-gimplify.h"