1 /* Expands front end tree to back end RTL for GCC.
2 Copyright (C) 1987, 1988, 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
3 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009,
4 2010 Free Software Foundation, Inc.
6 This file is part of GCC.
8 GCC is free software; you can redistribute it and/or modify it under
9 the terms of the GNU General Public License as published by the Free
10 Software Foundation; either version 3, or (at your option) any later
13 GCC is distributed in the hope that it will be useful, but WITHOUT ANY
14 WARRANTY; without even the implied warranty of MERCHANTABILITY or
15 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
18 You should have received a copy of the GNU General Public License
19 along with GCC; see the file COPYING3. If not see
20 <http://www.gnu.org/licenses/>. */
22 /* This file handles the generation of rtl code from tree structure
23 at the level of the function as a whole.
24 It creates the rtl expressions for parameters and auto variables
25 and has full responsibility for allocating stack slots.
27 `expand_function_start' is called at the beginning of a function,
28 before the function body is parsed, and `expand_function_end' is
29 called after parsing the body.
31 Call `assign_stack_local' to allocate a stack slot for a local variable.
32 This is usually done during the RTL generation for the function body,
33 but it can also be done in the reload pass when a pseudo-register does
34 not get a hard register. */
38 #include "coretypes.h"
40 #include "rtl-error.h"
49 #include "hard-reg-set.h"
50 #include "insn-config.h"
53 #include "basic-block.h"
57 #include "integrate.h"
58 #include "langhooks.h"
60 #include "cfglayout.h"
62 #include "tree-pass.h"
68 /* So we can assign to cfun in this file. */
71 #ifndef STACK_ALIGNMENT_NEEDED
72 #define STACK_ALIGNMENT_NEEDED 1
75 #define STACK_BYTES (STACK_BOUNDARY / BITS_PER_UNIT)
77 /* Some systems use __main in a way incompatible with its use in gcc, in these
78 cases use the macros NAME__MAIN to give a quoted symbol and SYMBOL__MAIN to
79 give the same symbol without quotes for an alternative entry point. You
80 must define both, or neither. */
82 #define NAME__MAIN "__main"
85 /* Round a value to the lowest integer less than it that is a multiple of
86 the required alignment. Avoid using division in case the value is
87 negative. Assume the alignment is a power of two. */
88 #define FLOOR_ROUND(VALUE,ALIGN) ((VALUE) & ~((ALIGN) - 1))
90 /* Similar, but round to the next highest integer that meets the
92 #define CEIL_ROUND(VALUE,ALIGN) (((VALUE) + (ALIGN) - 1) & ~((ALIGN)- 1))
94 /* Nonzero if function being compiled doesn't contain any calls
95 (ignoring the prologue and epilogue). This is set prior to
96 local register allocation and is valid for the remaining
98 int current_function_is_leaf;
100 /* Nonzero if function being compiled doesn't modify the stack pointer
101 (ignoring the prologue and epilogue). This is only valid after
102 pass_stack_ptr_mod has run. */
103 int current_function_sp_is_unchanging;
105 /* Nonzero if the function being compiled is a leaf function which only
106 uses leaf registers. This is valid after reload (specifically after
107 sched2) and is useful only if the port defines LEAF_REGISTERS. */
108 int current_function_uses_only_leaf_regs;
110 /* Nonzero once virtual register instantiation has been done.
111 assign_stack_local uses frame_pointer_rtx when this is nonzero.
112 calls.c:emit_library_call_value_1 uses it to set up
113 post-instantiation libcalls. */
114 int virtuals_instantiated;
116 /* Assign unique numbers to labels generated for profiling, debugging, etc. */
117 static GTY(()) int funcdef_no;
119 /* These variables hold pointers to functions to create and destroy
120 target specific, per-function data structures. */
121 struct machine_function * (*init_machine_status) (void);
123 /* The currently compiled function. */
124 struct function *cfun = 0;
126 /* These hashes record the prologue and epilogue insns. */
127 static GTY((if_marked ("ggc_marked_p"), param_is (struct rtx_def)))
128 htab_t prologue_insn_hash;
129 static GTY((if_marked ("ggc_marked_p"), param_is (struct rtx_def)))
130 htab_t epilogue_insn_hash;
133 htab_t types_used_by_vars_hash = NULL;
134 VEC(tree,gc) *types_used_by_cur_var_decl;
136 /* Forward declarations. */
138 static struct temp_slot *find_temp_slot_from_address (rtx);
139 static void pad_to_arg_alignment (struct args_size *, int, struct args_size *);
140 static void pad_below (struct args_size *, enum machine_mode, tree);
141 static void reorder_blocks_1 (rtx, tree, VEC(tree,heap) **);
142 static int all_blocks (tree, tree *);
143 static tree *get_block_vector (tree, int *);
144 extern tree debug_find_var_in_block_tree (tree, tree);
145 /* We always define `record_insns' even if it's not used so that we
146 can always export `prologue_epilogue_contains'. */
147 static void record_insns (rtx, rtx, htab_t *) ATTRIBUTE_UNUSED;
148 static bool contains (const_rtx, htab_t);
150 static void emit_return_into_block (basic_block);
152 static void prepare_function_start (void);
153 static void do_clobber_return_reg (rtx, void *);
154 static void do_use_return_reg (rtx, void *);
155 static void set_insn_locators (rtx, int) ATTRIBUTE_UNUSED;
157 /* Stack of nested functions. */
158 /* Keep track of the cfun stack. */
160 typedef struct function *function_p;
162 DEF_VEC_P(function_p);
163 DEF_VEC_ALLOC_P(function_p,heap);
164 static VEC(function_p,heap) *function_context_stack;
166 /* Save the current context for compilation of a nested function.
167 This is called from language-specific code. */
170 push_function_context (void)
173 allocate_struct_function (NULL, false);
175 VEC_safe_push (function_p, heap, function_context_stack, cfun);
179 /* Restore the last saved context, at the end of a nested function.
180 This function is called from language-specific code. */
183 pop_function_context (void)
185 struct function *p = VEC_pop (function_p, function_context_stack);
187 current_function_decl = p->decl;
189 /* Reset variables that have known state during rtx generation. */
190 virtuals_instantiated = 0;
191 generating_concat_p = 1;
194 /* Clear out all parts of the state in F that can safely be discarded
195 after the function has been parsed, but not compiled, to let
196 garbage collection reclaim the memory. */
199 free_after_parsing (struct function *f)
204 /* Clear out all parts of the state in F that can safely be discarded
205 after the function has been compiled, to let garbage collection
206 reclaim the memory. */
209 free_after_compilation (struct function *f)
211 prologue_insn_hash = NULL;
212 epilogue_insn_hash = NULL;
214 if (crtl->emit.regno_pointer_align)
215 free (crtl->emit.regno_pointer_align);
217 memset (crtl, 0, sizeof (struct rtl_data));
222 regno_reg_rtx = NULL;
223 insn_locators_free ();
226 /* Return size needed for stack frame based on slots so far allocated.
227 This size counts from zero. It is not rounded to PREFERRED_STACK_BOUNDARY;
228 the caller may have to do that. */
231 get_frame_size (void)
233 if (FRAME_GROWS_DOWNWARD)
234 return -frame_offset;
239 /* Issue an error message and return TRUE if frame OFFSET overflows in
240 the signed target pointer arithmetics for function FUNC. Otherwise
244 frame_offset_overflow (HOST_WIDE_INT offset, tree func)
246 unsigned HOST_WIDE_INT size = FRAME_GROWS_DOWNWARD ? -offset : offset;
248 if (size > ((unsigned HOST_WIDE_INT) 1 << (GET_MODE_BITSIZE (Pmode) - 1))
249 /* Leave room for the fixed part of the frame. */
250 - 64 * UNITS_PER_WORD)
252 error_at (DECL_SOURCE_LOCATION (func),
253 "total size of local objects too large");
260 /* Return stack slot alignment in bits for TYPE and MODE. */
263 get_stack_local_alignment (tree type, enum machine_mode mode)
265 unsigned int alignment;
268 alignment = BIGGEST_ALIGNMENT;
270 alignment = GET_MODE_ALIGNMENT (mode);
272 /* Allow the frond-end to (possibly) increase the alignment of this
275 type = lang_hooks.types.type_for_mode (mode, 0);
277 return STACK_SLOT_ALIGNMENT (type, mode, alignment);
280 /* Determine whether it is possible to fit a stack slot of size SIZE and
281 alignment ALIGNMENT into an area in the stack frame that starts at
282 frame offset START and has a length of LENGTH. If so, store the frame
283 offset to be used for the stack slot in *POFFSET and return true;
284 return false otherwise. This function will extend the frame size when
285 given a start/length pair that lies at the end of the frame. */
288 try_fit_stack_local (HOST_WIDE_INT start, HOST_WIDE_INT length,
289 HOST_WIDE_INT size, unsigned int alignment,
290 HOST_WIDE_INT *poffset)
292 HOST_WIDE_INT this_frame_offset;
293 int frame_off, frame_alignment, frame_phase;
295 /* Calculate how many bytes the start of local variables is off from
297 frame_alignment = PREFERRED_STACK_BOUNDARY / BITS_PER_UNIT;
298 frame_off = STARTING_FRAME_OFFSET % frame_alignment;
299 frame_phase = frame_off ? frame_alignment - frame_off : 0;
301 /* Round the frame offset to the specified alignment. */
303 /* We must be careful here, since FRAME_OFFSET might be negative and
304 division with a negative dividend isn't as well defined as we might
305 like. So we instead assume that ALIGNMENT is a power of two and
306 use logical operations which are unambiguous. */
307 if (FRAME_GROWS_DOWNWARD)
309 = (FLOOR_ROUND (start + length - size - frame_phase,
310 (unsigned HOST_WIDE_INT) alignment)
314 = (CEIL_ROUND (start - frame_phase,
315 (unsigned HOST_WIDE_INT) alignment)
318 /* See if it fits. If this space is at the edge of the frame,
319 consider extending the frame to make it fit. Our caller relies on
320 this when allocating a new slot. */
321 if (frame_offset == start && this_frame_offset < frame_offset)
322 frame_offset = this_frame_offset;
323 else if (this_frame_offset < start)
325 else if (start + length == frame_offset
326 && this_frame_offset + size > start + length)
327 frame_offset = this_frame_offset + size;
328 else if (this_frame_offset + size > start + length)
331 *poffset = this_frame_offset;
335 /* Create a new frame_space structure describing free space in the stack
336 frame beginning at START and ending at END, and chain it into the
337 function's frame_space_list. */
340 add_frame_space (HOST_WIDE_INT start, HOST_WIDE_INT end)
342 struct frame_space *space = ggc_alloc_frame_space ();
343 space->next = crtl->frame_space_list;
344 crtl->frame_space_list = space;
345 space->start = start;
346 space->length = end - start;
349 /* Allocate a stack slot of SIZE bytes and return a MEM rtx for it
350 with machine mode MODE.
352 ALIGN controls the amount of alignment for the address of the slot:
353 0 means according to MODE,
354 -1 means use BIGGEST_ALIGNMENT and round size to multiple of that,
355 -2 means use BITS_PER_UNIT,
356 positive specifies alignment boundary in bits.
358 If REDUCE_ALIGNMENT_OK is true, it is OK to reduce alignment.
360 We do not round to stack_boundary here. */
363 assign_stack_local_1 (enum machine_mode mode, HOST_WIDE_INT size,
365 bool reduce_alignment_ok ATTRIBUTE_UNUSED)
368 int bigend_correction = 0;
369 HOST_WIDE_INT slot_offset = 0, old_frame_offset;
370 unsigned int alignment, alignment_in_bits;
374 alignment = get_stack_local_alignment (NULL, mode);
375 alignment /= BITS_PER_UNIT;
377 else if (align == -1)
379 alignment = BIGGEST_ALIGNMENT / BITS_PER_UNIT;
380 size = CEIL_ROUND (size, alignment);
382 else if (align == -2)
383 alignment = 1; /* BITS_PER_UNIT / BITS_PER_UNIT */
385 alignment = align / BITS_PER_UNIT;
387 alignment_in_bits = alignment * BITS_PER_UNIT;
389 /* Ignore alignment if it exceeds MAX_SUPPORTED_STACK_ALIGNMENT. */
390 if (alignment_in_bits > MAX_SUPPORTED_STACK_ALIGNMENT)
392 alignment_in_bits = MAX_SUPPORTED_STACK_ALIGNMENT;
393 alignment = alignment_in_bits / BITS_PER_UNIT;
396 if (SUPPORTS_STACK_ALIGNMENT)
398 if (crtl->stack_alignment_estimated < alignment_in_bits)
400 if (!crtl->stack_realign_processed)
401 crtl->stack_alignment_estimated = alignment_in_bits;
404 /* If stack is realigned and stack alignment value
405 hasn't been finalized, it is OK not to increase
406 stack_alignment_estimated. The bigger alignment
407 requirement is recorded in stack_alignment_needed
409 gcc_assert (!crtl->stack_realign_finalized);
410 if (!crtl->stack_realign_needed)
412 /* It is OK to reduce the alignment as long as the
413 requested size is 0 or the estimated stack
414 alignment >= mode alignment. */
415 gcc_assert (reduce_alignment_ok
417 || (crtl->stack_alignment_estimated
418 >= GET_MODE_ALIGNMENT (mode)));
419 alignment_in_bits = crtl->stack_alignment_estimated;
420 alignment = alignment_in_bits / BITS_PER_UNIT;
426 if (crtl->stack_alignment_needed < alignment_in_bits)
427 crtl->stack_alignment_needed = alignment_in_bits;
428 if (crtl->max_used_stack_slot_alignment < alignment_in_bits)
429 crtl->max_used_stack_slot_alignment = alignment_in_bits;
431 if (mode != BLKmode || size != 0)
433 struct frame_space **psp;
435 for (psp = &crtl->frame_space_list; *psp; psp = &(*psp)->next)
437 struct frame_space *space = *psp;
438 if (!try_fit_stack_local (space->start, space->length, size,
439 alignment, &slot_offset))
442 if (slot_offset > space->start)
443 add_frame_space (space->start, slot_offset);
444 if (slot_offset + size < space->start + space->length)
445 add_frame_space (slot_offset + size,
446 space->start + space->length);
450 else if (!STACK_ALIGNMENT_NEEDED)
452 slot_offset = frame_offset;
456 old_frame_offset = frame_offset;
458 if (FRAME_GROWS_DOWNWARD)
460 frame_offset -= size;
461 try_fit_stack_local (frame_offset, size, size, alignment, &slot_offset);
463 if (slot_offset > frame_offset)
464 add_frame_space (frame_offset, slot_offset);
465 if (slot_offset + size < old_frame_offset)
466 add_frame_space (slot_offset + size, old_frame_offset);
470 frame_offset += size;
471 try_fit_stack_local (old_frame_offset, size, size, alignment, &slot_offset);
473 if (slot_offset > old_frame_offset)
474 add_frame_space (old_frame_offset, slot_offset);
475 if (slot_offset + size < frame_offset)
476 add_frame_space (slot_offset + size, frame_offset);
480 /* On a big-endian machine, if we are allocating more space than we will use,
481 use the least significant bytes of those that are allocated. */
482 if (BYTES_BIG_ENDIAN && mode != BLKmode && GET_MODE_SIZE (mode) < size)
483 bigend_correction = size - GET_MODE_SIZE (mode);
485 /* If we have already instantiated virtual registers, return the actual
486 address relative to the frame pointer. */
487 if (virtuals_instantiated)
488 addr = plus_constant (frame_pointer_rtx,
490 (slot_offset + bigend_correction
491 + STARTING_FRAME_OFFSET, Pmode));
493 addr = plus_constant (virtual_stack_vars_rtx,
495 (slot_offset + bigend_correction,
498 x = gen_rtx_MEM (mode, addr);
499 set_mem_align (x, alignment_in_bits);
500 MEM_NOTRAP_P (x) = 1;
503 = gen_rtx_EXPR_LIST (VOIDmode, x, stack_slot_list);
505 if (frame_offset_overflow (frame_offset, current_function_decl))
511 /* Wrap up assign_stack_local_1 with last parameter as false. */
514 assign_stack_local (enum machine_mode mode, HOST_WIDE_INT size, int align)
516 return assign_stack_local_1 (mode, size, align, false);
520 /* In order to evaluate some expressions, such as function calls returning
521 structures in memory, we need to temporarily allocate stack locations.
522 We record each allocated temporary in the following structure.
524 Associated with each temporary slot is a nesting level. When we pop up
525 one level, all temporaries associated with the previous level are freed.
526 Normally, all temporaries are freed after the execution of the statement
527 in which they were created. However, if we are inside a ({...}) grouping,
528 the result may be in a temporary and hence must be preserved. If the
529 result could be in a temporary, we preserve it if we can determine which
530 one it is in. If we cannot determine which temporary may contain the
531 result, all temporaries are preserved. A temporary is preserved by
532 pretending it was allocated at the previous nesting level.
534 Automatic variables are also assigned temporary slots, at the nesting
535 level where they are defined. They are marked a "kept" so that
536 free_temp_slots will not free them. */
538 struct GTY(()) temp_slot {
539 /* Points to next temporary slot. */
540 struct temp_slot *next;
541 /* Points to previous temporary slot. */
542 struct temp_slot *prev;
543 /* The rtx to used to reference the slot. */
545 /* The size, in units, of the slot. */
547 /* The type of the object in the slot, or zero if it doesn't correspond
548 to a type. We use this to determine whether a slot can be reused.
549 It can be reused if objects of the type of the new slot will always
550 conflict with objects of the type of the old slot. */
552 /* The alignment (in bits) of the slot. */
554 /* Nonzero if this temporary is currently in use. */
556 /* Nonzero if this temporary has its address taken. */
558 /* Nesting level at which this slot is being used. */
560 /* Nonzero if this should survive a call to free_temp_slots. */
562 /* The offset of the slot from the frame_pointer, including extra space
563 for alignment. This info is for combine_temp_slots. */
564 HOST_WIDE_INT base_offset;
565 /* The size of the slot, including extra space for alignment. This
566 info is for combine_temp_slots. */
567 HOST_WIDE_INT full_size;
570 /* A table of addresses that represent a stack slot. The table is a mapping
571 from address RTXen to a temp slot. */
572 static GTY((param_is(struct temp_slot_address_entry))) htab_t temp_slot_address_table;
574 /* Entry for the above hash table. */
575 struct GTY(()) temp_slot_address_entry {
578 struct temp_slot *temp_slot;
581 /* Removes temporary slot TEMP from LIST. */
584 cut_slot_from_list (struct temp_slot *temp, struct temp_slot **list)
587 temp->next->prev = temp->prev;
589 temp->prev->next = temp->next;
593 temp->prev = temp->next = NULL;
596 /* Inserts temporary slot TEMP to LIST. */
599 insert_slot_to_list (struct temp_slot *temp, struct temp_slot **list)
603 (*list)->prev = temp;
608 /* Returns the list of used temp slots at LEVEL. */
610 static struct temp_slot **
611 temp_slots_at_level (int level)
613 if (level >= (int) VEC_length (temp_slot_p, used_temp_slots))
614 VEC_safe_grow_cleared (temp_slot_p, gc, used_temp_slots, level + 1);
616 return &(VEC_address (temp_slot_p, used_temp_slots)[level]);
619 /* Returns the maximal temporary slot level. */
622 max_slot_level (void)
624 if (!used_temp_slots)
627 return VEC_length (temp_slot_p, used_temp_slots) - 1;
630 /* Moves temporary slot TEMP to LEVEL. */
633 move_slot_to_level (struct temp_slot *temp, int level)
635 cut_slot_from_list (temp, temp_slots_at_level (temp->level));
636 insert_slot_to_list (temp, temp_slots_at_level (level));
640 /* Make temporary slot TEMP available. */
643 make_slot_available (struct temp_slot *temp)
645 cut_slot_from_list (temp, temp_slots_at_level (temp->level));
646 insert_slot_to_list (temp, &avail_temp_slots);
651 /* Compute the hash value for an address -> temp slot mapping.
652 The value is cached on the mapping entry. */
654 temp_slot_address_compute_hash (struct temp_slot_address_entry *t)
656 int do_not_record = 0;
657 return hash_rtx (t->address, GET_MODE (t->address),
658 &do_not_record, NULL, false);
661 /* Return the hash value for an address -> temp slot mapping. */
663 temp_slot_address_hash (const void *p)
665 const struct temp_slot_address_entry *t;
666 t = (const struct temp_slot_address_entry *) p;
670 /* Compare two address -> temp slot mapping entries. */
672 temp_slot_address_eq (const void *p1, const void *p2)
674 const struct temp_slot_address_entry *t1, *t2;
675 t1 = (const struct temp_slot_address_entry *) p1;
676 t2 = (const struct temp_slot_address_entry *) p2;
677 return exp_equiv_p (t1->address, t2->address, 0, true);
680 /* Add ADDRESS as an alias of TEMP_SLOT to the addess -> temp slot mapping. */
682 insert_temp_slot_address (rtx address, struct temp_slot *temp_slot)
685 struct temp_slot_address_entry *t = ggc_alloc_temp_slot_address_entry ();
686 t->address = address;
687 t->temp_slot = temp_slot;
688 t->hash = temp_slot_address_compute_hash (t);
689 slot = htab_find_slot_with_hash (temp_slot_address_table, t, t->hash, INSERT);
693 /* Remove an address -> temp slot mapping entry if the temp slot is
694 not in use anymore. Callback for remove_unused_temp_slot_addresses. */
696 remove_unused_temp_slot_addresses_1 (void **slot, void *data ATTRIBUTE_UNUSED)
698 const struct temp_slot_address_entry *t;
699 t = (const struct temp_slot_address_entry *) *slot;
700 if (! t->temp_slot->in_use)
705 /* Remove all mappings of addresses to unused temp slots. */
707 remove_unused_temp_slot_addresses (void)
709 htab_traverse (temp_slot_address_table,
710 remove_unused_temp_slot_addresses_1,
714 /* Find the temp slot corresponding to the object at address X. */
716 static struct temp_slot *
717 find_temp_slot_from_address (rtx x)
720 struct temp_slot_address_entry tmp, *t;
722 /* First try the easy way:
723 See if X exists in the address -> temp slot mapping. */
725 tmp.temp_slot = NULL;
726 tmp.hash = temp_slot_address_compute_hash (&tmp);
727 t = (struct temp_slot_address_entry *)
728 htab_find_with_hash (temp_slot_address_table, &tmp, tmp.hash);
732 /* If we have a sum involving a register, see if it points to a temp
734 if (GET_CODE (x) == PLUS && REG_P (XEXP (x, 0))
735 && (p = find_temp_slot_from_address (XEXP (x, 0))) != 0)
737 else if (GET_CODE (x) == PLUS && REG_P (XEXP (x, 1))
738 && (p = find_temp_slot_from_address (XEXP (x, 1))) != 0)
741 /* Last resort: Address is a virtual stack var address. */
742 if (GET_CODE (x) == PLUS
743 && XEXP (x, 0) == virtual_stack_vars_rtx
744 && CONST_INT_P (XEXP (x, 1)))
747 for (i = max_slot_level (); i >= 0; i--)
748 for (p = *temp_slots_at_level (i); p; p = p->next)
750 if (INTVAL (XEXP (x, 1)) >= p->base_offset
751 && INTVAL (XEXP (x, 1)) < p->base_offset + p->full_size)
759 /* Allocate a temporary stack slot and record it for possible later
762 MODE is the machine mode to be given to the returned rtx.
764 SIZE is the size in units of the space required. We do no rounding here
765 since assign_stack_local will do any required rounding.
767 KEEP is 1 if this slot is to be retained after a call to
768 free_temp_slots. Automatic variables for a block are allocated
769 with this flag. KEEP values of 2 or 3 were needed respectively
770 for variables whose lifetime is controlled by CLEANUP_POINT_EXPRs
771 or for SAVE_EXPRs, but they are now unused.
773 TYPE is the type that will be used for the stack slot. */
776 assign_stack_temp_for_type (enum machine_mode mode, HOST_WIDE_INT size,
780 struct temp_slot *p, *best_p = 0, *selected = NULL, **pp;
783 /* If SIZE is -1 it means that somebody tried to allocate a temporary
784 of a variable size. */
785 gcc_assert (size != -1);
787 /* These are now unused. */
788 gcc_assert (keep <= 1);
790 align = get_stack_local_alignment (type, mode);
792 /* Try to find an available, already-allocated temporary of the proper
793 mode which meets the size and alignment requirements. Choose the
794 smallest one with the closest alignment.
796 If assign_stack_temp is called outside of the tree->rtl expansion,
797 we cannot reuse the stack slots (that may still refer to
798 VIRTUAL_STACK_VARS_REGNUM). */
799 if (!virtuals_instantiated)
801 for (p = avail_temp_slots; p; p = p->next)
803 if (p->align >= align && p->size >= size
804 && GET_MODE (p->slot) == mode
805 && objects_must_conflict_p (p->type, type)
806 && (best_p == 0 || best_p->size > p->size
807 || (best_p->size == p->size && best_p->align > p->align)))
809 if (p->align == align && p->size == size)
812 cut_slot_from_list (selected, &avail_temp_slots);
821 /* Make our best, if any, the one to use. */
825 cut_slot_from_list (selected, &avail_temp_slots);
827 /* If there are enough aligned bytes left over, make them into a new
828 temp_slot so that the extra bytes don't get wasted. Do this only
829 for BLKmode slots, so that we can be sure of the alignment. */
830 if (GET_MODE (best_p->slot) == BLKmode)
832 int alignment = best_p->align / BITS_PER_UNIT;
833 HOST_WIDE_INT rounded_size = CEIL_ROUND (size, alignment);
835 if (best_p->size - rounded_size >= alignment)
837 p = ggc_alloc_temp_slot ();
838 p->in_use = p->addr_taken = 0;
839 p->size = best_p->size - rounded_size;
840 p->base_offset = best_p->base_offset + rounded_size;
841 p->full_size = best_p->full_size - rounded_size;
842 p->slot = adjust_address_nv (best_p->slot, BLKmode, rounded_size);
843 p->align = best_p->align;
844 p->type = best_p->type;
845 insert_slot_to_list (p, &avail_temp_slots);
847 stack_slot_list = gen_rtx_EXPR_LIST (VOIDmode, p->slot,
850 best_p->size = rounded_size;
851 best_p->full_size = rounded_size;
856 /* If we still didn't find one, make a new temporary. */
859 HOST_WIDE_INT frame_offset_old = frame_offset;
861 p = ggc_alloc_temp_slot ();
863 /* We are passing an explicit alignment request to assign_stack_local.
864 One side effect of that is assign_stack_local will not round SIZE
865 to ensure the frame offset remains suitably aligned.
867 So for requests which depended on the rounding of SIZE, we go ahead
868 and round it now. We also make sure ALIGNMENT is at least
869 BIGGEST_ALIGNMENT. */
870 gcc_assert (mode != BLKmode || align == BIGGEST_ALIGNMENT);
871 p->slot = assign_stack_local (mode,
873 ? CEIL_ROUND (size, (int) align / BITS_PER_UNIT)
879 /* The following slot size computation is necessary because we don't
880 know the actual size of the temporary slot until assign_stack_local
881 has performed all the frame alignment and size rounding for the
882 requested temporary. Note that extra space added for alignment
883 can be either above or below this stack slot depending on which
884 way the frame grows. We include the extra space if and only if it
885 is above this slot. */
886 if (FRAME_GROWS_DOWNWARD)
887 p->size = frame_offset_old - frame_offset;
891 /* Now define the fields used by combine_temp_slots. */
892 if (FRAME_GROWS_DOWNWARD)
894 p->base_offset = frame_offset;
895 p->full_size = frame_offset_old - frame_offset;
899 p->base_offset = frame_offset_old;
900 p->full_size = frame_offset - frame_offset_old;
910 p->level = temp_slot_level;
913 pp = temp_slots_at_level (p->level);
914 insert_slot_to_list (p, pp);
915 insert_temp_slot_address (XEXP (p->slot, 0), p);
917 /* Create a new MEM rtx to avoid clobbering MEM flags of old slots. */
918 slot = gen_rtx_MEM (mode, XEXP (p->slot, 0));
919 stack_slot_list = gen_rtx_EXPR_LIST (VOIDmode, slot, stack_slot_list);
921 /* If we know the alias set for the memory that will be used, use
922 it. If there's no TYPE, then we don't know anything about the
923 alias set for the memory. */
924 set_mem_alias_set (slot, type ? get_alias_set (type) : 0);
925 set_mem_align (slot, align);
927 /* If a type is specified, set the relevant flags. */
930 MEM_VOLATILE_P (slot) = TYPE_VOLATILE (type);
931 MEM_SET_IN_STRUCT_P (slot, (AGGREGATE_TYPE_P (type)
932 || TREE_CODE (type) == COMPLEX_TYPE));
934 MEM_NOTRAP_P (slot) = 1;
939 /* Allocate a temporary stack slot and record it for possible later
940 reuse. First three arguments are same as in preceding function. */
943 assign_stack_temp (enum machine_mode mode, HOST_WIDE_INT size, int keep)
945 return assign_stack_temp_for_type (mode, size, keep, NULL_TREE);
948 /* Assign a temporary.
949 If TYPE_OR_DECL is a decl, then we are doing it on behalf of the decl
950 and so that should be used in error messages. In either case, we
951 allocate of the given type.
952 KEEP is as for assign_stack_temp.
953 MEMORY_REQUIRED is 1 if the result must be addressable stack memory;
954 it is 0 if a register is OK.
955 DONT_PROMOTE is 1 if we should not promote values in register
959 assign_temp (tree type_or_decl, int keep, int memory_required,
960 int dont_promote ATTRIBUTE_UNUSED)
963 enum machine_mode mode;
968 if (DECL_P (type_or_decl))
969 decl = type_or_decl, type = TREE_TYPE (decl);
971 decl = NULL, type = type_or_decl;
973 mode = TYPE_MODE (type);
975 unsignedp = TYPE_UNSIGNED (type);
978 if (mode == BLKmode || memory_required)
980 HOST_WIDE_INT size = int_size_in_bytes (type);
983 /* Zero sized arrays are GNU C extension. Set size to 1 to avoid
984 problems with allocating the stack space. */
988 /* Unfortunately, we don't yet know how to allocate variable-sized
989 temporaries. However, sometimes we can find a fixed upper limit on
990 the size, so try that instead. */
992 size = max_int_size_in_bytes (type);
994 /* The size of the temporary may be too large to fit into an integer. */
995 /* ??? Not sure this should happen except for user silliness, so limit
996 this to things that aren't compiler-generated temporaries. The
997 rest of the time we'll die in assign_stack_temp_for_type. */
998 if (decl && size == -1
999 && TREE_CODE (TYPE_SIZE_UNIT (type)) == INTEGER_CST)
1001 error ("size of variable %q+D is too large", decl);
1005 tmp = assign_stack_temp_for_type (mode, size, keep, type);
1011 mode = promote_mode (type, mode, &unsignedp);
1014 return gen_reg_rtx (mode);
1017 /* Combine temporary stack slots which are adjacent on the stack.
1019 This allows for better use of already allocated stack space. This is only
1020 done for BLKmode slots because we can be sure that we won't have alignment
1021 problems in this case. */
1024 combine_temp_slots (void)
1026 struct temp_slot *p, *q, *next, *next_q;
1029 /* We can't combine slots, because the information about which slot
1030 is in which alias set will be lost. */
1031 if (flag_strict_aliasing)
1034 /* If there are a lot of temp slots, don't do anything unless
1035 high levels of optimization. */
1036 if (! flag_expensive_optimizations)
1037 for (p = avail_temp_slots, num_slots = 0; p; p = p->next, num_slots++)
1038 if (num_slots > 100 || (num_slots > 10 && optimize == 0))
1041 for (p = avail_temp_slots; p; p = next)
1047 if (GET_MODE (p->slot) != BLKmode)
1050 for (q = p->next; q; q = next_q)
1056 if (GET_MODE (q->slot) != BLKmode)
1059 if (p->base_offset + p->full_size == q->base_offset)
1061 /* Q comes after P; combine Q into P. */
1063 p->full_size += q->full_size;
1066 else if (q->base_offset + q->full_size == p->base_offset)
1068 /* P comes after Q; combine P into Q. */
1070 q->full_size += p->full_size;
1075 cut_slot_from_list (q, &avail_temp_slots);
1078 /* Either delete P or advance past it. */
1080 cut_slot_from_list (p, &avail_temp_slots);
1084 /* Indicate that NEW_RTX is an alternate way of referring to the temp
1085 slot that previously was known by OLD_RTX. */
1088 update_temp_slot_address (rtx old_rtx, rtx new_rtx)
1090 struct temp_slot *p;
1092 if (rtx_equal_p (old_rtx, new_rtx))
1095 p = find_temp_slot_from_address (old_rtx);
1097 /* If we didn't find one, see if both OLD_RTX is a PLUS. If so, and
1098 NEW_RTX is a register, see if one operand of the PLUS is a
1099 temporary location. If so, NEW_RTX points into it. Otherwise,
1100 if both OLD_RTX and NEW_RTX are a PLUS and if there is a register
1101 in common between them. If so, try a recursive call on those
1105 if (GET_CODE (old_rtx) != PLUS)
1108 if (REG_P (new_rtx))
1110 update_temp_slot_address (XEXP (old_rtx, 0), new_rtx);
1111 update_temp_slot_address (XEXP (old_rtx, 1), new_rtx);
1114 else if (GET_CODE (new_rtx) != PLUS)
1117 if (rtx_equal_p (XEXP (old_rtx, 0), XEXP (new_rtx, 0)))
1118 update_temp_slot_address (XEXP (old_rtx, 1), XEXP (new_rtx, 1));
1119 else if (rtx_equal_p (XEXP (old_rtx, 1), XEXP (new_rtx, 0)))
1120 update_temp_slot_address (XEXP (old_rtx, 0), XEXP (new_rtx, 1));
1121 else if (rtx_equal_p (XEXP (old_rtx, 0), XEXP (new_rtx, 1)))
1122 update_temp_slot_address (XEXP (old_rtx, 1), XEXP (new_rtx, 0));
1123 else if (rtx_equal_p (XEXP (old_rtx, 1), XEXP (new_rtx, 1)))
1124 update_temp_slot_address (XEXP (old_rtx, 0), XEXP (new_rtx, 0));
1129 /* Otherwise add an alias for the temp's address. */
1130 insert_temp_slot_address (new_rtx, p);
1133 /* If X could be a reference to a temporary slot, mark the fact that its
1134 address was taken. */
1137 mark_temp_addr_taken (rtx x)
1139 struct temp_slot *p;
1144 /* If X is not in memory or is at a constant address, it cannot be in
1145 a temporary slot. */
1146 if (!MEM_P (x) || CONSTANT_P (XEXP (x, 0)))
1149 p = find_temp_slot_from_address (XEXP (x, 0));
1154 /* If X could be a reference to a temporary slot, mark that slot as
1155 belonging to the to one level higher than the current level. If X
1156 matched one of our slots, just mark that one. Otherwise, we can't
1157 easily predict which it is, so upgrade all of them. Kept slots
1158 need not be touched.
1160 This is called when an ({...}) construct occurs and a statement
1161 returns a value in memory. */
1164 preserve_temp_slots (rtx x)
1166 struct temp_slot *p = 0, *next;
1168 /* If there is no result, we still might have some objects whose address
1169 were taken, so we need to make sure they stay around. */
1172 for (p = *temp_slots_at_level (temp_slot_level); p; p = next)
1177 move_slot_to_level (p, temp_slot_level - 1);
1183 /* If X is a register that is being used as a pointer, see if we have
1184 a temporary slot we know it points to. To be consistent with
1185 the code below, we really should preserve all non-kept slots
1186 if we can't find a match, but that seems to be much too costly. */
1187 if (REG_P (x) && REG_POINTER (x))
1188 p = find_temp_slot_from_address (x);
1190 /* If X is not in memory or is at a constant address, it cannot be in
1191 a temporary slot, but it can contain something whose address was
1193 if (p == 0 && (!MEM_P (x) || CONSTANT_P (XEXP (x, 0))))
1195 for (p = *temp_slots_at_level (temp_slot_level); p; p = next)
1200 move_slot_to_level (p, temp_slot_level - 1);
1206 /* First see if we can find a match. */
1208 p = find_temp_slot_from_address (XEXP (x, 0));
1212 /* Move everything at our level whose address was taken to our new
1213 level in case we used its address. */
1214 struct temp_slot *q;
1216 if (p->level == temp_slot_level)
1218 for (q = *temp_slots_at_level (temp_slot_level); q; q = next)
1222 if (p != q && q->addr_taken)
1223 move_slot_to_level (q, temp_slot_level - 1);
1226 move_slot_to_level (p, temp_slot_level - 1);
1232 /* Otherwise, preserve all non-kept slots at this level. */
1233 for (p = *temp_slots_at_level (temp_slot_level); p; p = next)
1238 move_slot_to_level (p, temp_slot_level - 1);
1242 /* Free all temporaries used so far. This is normally called at the
1243 end of generating code for a statement. */
1246 free_temp_slots (void)
1248 struct temp_slot *p, *next;
1249 bool some_available = false;
1251 for (p = *temp_slots_at_level (temp_slot_level); p; p = next)
1257 make_slot_available (p);
1258 some_available = true;
1264 remove_unused_temp_slot_addresses ();
1265 combine_temp_slots ();
1269 /* Push deeper into the nesting level for stack temporaries. */
1272 push_temp_slots (void)
1277 /* Pop a temporary nesting level. All slots in use in the current level
1281 pop_temp_slots (void)
1283 struct temp_slot *p, *next;
1284 bool some_available = false;
1286 for (p = *temp_slots_at_level (temp_slot_level); p; p = next)
1289 make_slot_available (p);
1290 some_available = true;
1295 remove_unused_temp_slot_addresses ();
1296 combine_temp_slots ();
1302 /* Initialize temporary slots. */
1305 init_temp_slots (void)
1307 /* We have not allocated any temporaries yet. */
1308 avail_temp_slots = 0;
1309 used_temp_slots = 0;
1310 temp_slot_level = 0;
1312 /* Set up the table to map addresses to temp slots. */
1313 if (! temp_slot_address_table)
1314 temp_slot_address_table = htab_create_ggc (32,
1315 temp_slot_address_hash,
1316 temp_slot_address_eq,
1319 htab_empty (temp_slot_address_table);
1322 /* These routines are responsible for converting virtual register references
1323 to the actual hard register references once RTL generation is complete.
1325 The following four variables are used for communication between the
1326 routines. They contain the offsets of the virtual registers from their
1327 respective hard registers. */
1329 static int in_arg_offset;
1330 static int var_offset;
1331 static int dynamic_offset;
1332 static int out_arg_offset;
1333 static int cfa_offset;
1335 /* In most machines, the stack pointer register is equivalent to the bottom
1338 #ifndef STACK_POINTER_OFFSET
1339 #define STACK_POINTER_OFFSET 0
1342 /* If not defined, pick an appropriate default for the offset of dynamically
1343 allocated memory depending on the value of ACCUMULATE_OUTGOING_ARGS,
1344 REG_PARM_STACK_SPACE, and OUTGOING_REG_PARM_STACK_SPACE. */
1346 #ifndef STACK_DYNAMIC_OFFSET
1348 /* The bottom of the stack points to the actual arguments. If
1349 REG_PARM_STACK_SPACE is defined, this includes the space for the register
1350 parameters. However, if OUTGOING_REG_PARM_STACK space is not defined,
1351 stack space for register parameters is not pushed by the caller, but
1352 rather part of the fixed stack areas and hence not included in
1353 `crtl->outgoing_args_size'. Nevertheless, we must allow
1354 for it when allocating stack dynamic objects. */
1356 #if defined(REG_PARM_STACK_SPACE)
1357 #define STACK_DYNAMIC_OFFSET(FNDECL) \
1358 ((ACCUMULATE_OUTGOING_ARGS \
1359 ? (crtl->outgoing_args_size \
1360 + (OUTGOING_REG_PARM_STACK_SPACE ((!(FNDECL) ? NULL_TREE : TREE_TYPE (FNDECL))) ? 0 \
1361 : REG_PARM_STACK_SPACE (FNDECL))) \
1362 : 0) + (STACK_POINTER_OFFSET))
1364 #define STACK_DYNAMIC_OFFSET(FNDECL) \
1365 ((ACCUMULATE_OUTGOING_ARGS ? crtl->outgoing_args_size : 0) \
1366 + (STACK_POINTER_OFFSET))
1371 /* Given a piece of RTX and a pointer to a HOST_WIDE_INT, if the RTX
1372 is a virtual register, return the equivalent hard register and set the
1373 offset indirectly through the pointer. Otherwise, return 0. */
1376 instantiate_new_reg (rtx x, HOST_WIDE_INT *poffset)
1379 HOST_WIDE_INT offset;
1381 if (x == virtual_incoming_args_rtx)
1383 if (stack_realign_drap)
1385 /* Replace virtual_incoming_args_rtx with internal arg
1386 pointer if DRAP is used to realign stack. */
1387 new_rtx = crtl->args.internal_arg_pointer;
1391 new_rtx = arg_pointer_rtx, offset = in_arg_offset;
1393 else if (x == virtual_stack_vars_rtx)
1394 new_rtx = frame_pointer_rtx, offset = var_offset;
1395 else if (x == virtual_stack_dynamic_rtx)
1396 new_rtx = stack_pointer_rtx, offset = dynamic_offset;
1397 else if (x == virtual_outgoing_args_rtx)
1398 new_rtx = stack_pointer_rtx, offset = out_arg_offset;
1399 else if (x == virtual_cfa_rtx)
1401 #ifdef FRAME_POINTER_CFA_OFFSET
1402 new_rtx = frame_pointer_rtx;
1404 new_rtx = arg_pointer_rtx;
1406 offset = cfa_offset;
1415 /* A subroutine of instantiate_virtual_regs, called via for_each_rtx.
1416 Instantiate any virtual registers present inside of *LOC. The expression
1417 is simplified, as much as possible, but is not to be considered "valid"
1418 in any sense implied by the target. If any change is made, set CHANGED
1422 instantiate_virtual_regs_in_rtx (rtx *loc, void *data)
1424 HOST_WIDE_INT offset;
1425 bool *changed = (bool *) data;
1432 switch (GET_CODE (x))
1435 new_rtx = instantiate_new_reg (x, &offset);
1438 *loc = plus_constant (new_rtx, offset);
1445 new_rtx = instantiate_new_reg (XEXP (x, 0), &offset);
1448 new_rtx = plus_constant (new_rtx, offset);
1449 *loc = simplify_gen_binary (PLUS, GET_MODE (x), new_rtx, XEXP (x, 1));
1455 /* FIXME -- from old code */
1456 /* If we have (plus (subreg (virtual-reg)) (const_int)), we know
1457 we can commute the PLUS and SUBREG because pointers into the
1458 frame are well-behaved. */
1468 /* A subroutine of instantiate_virtual_regs_in_insn. Return true if X
1469 matches the predicate for insn CODE operand OPERAND. */
1472 safe_insn_predicate (int code, int operand, rtx x)
1474 const struct insn_operand_data *op_data;
1479 op_data = &insn_data[code].operand[operand];
1480 if (op_data->predicate == NULL)
1483 return op_data->predicate (x, op_data->mode);
1486 /* A subroutine of instantiate_virtual_regs. Instantiate any virtual
1487 registers present inside of insn. The result will be a valid insn. */
1490 instantiate_virtual_regs_in_insn (rtx insn)
1492 HOST_WIDE_INT offset;
1494 bool any_change = false;
1495 rtx set, new_rtx, x, seq;
1497 /* There are some special cases to be handled first. */
1498 set = single_set (insn);
1501 /* We're allowed to assign to a virtual register. This is interpreted
1502 to mean that the underlying register gets assigned the inverse
1503 transformation. This is used, for example, in the handling of
1505 new_rtx = instantiate_new_reg (SET_DEST (set), &offset);
1510 for_each_rtx (&SET_SRC (set), instantiate_virtual_regs_in_rtx, NULL);
1511 x = simplify_gen_binary (PLUS, GET_MODE (new_rtx), SET_SRC (set),
1513 x = force_operand (x, new_rtx);
1515 emit_move_insn (new_rtx, x);
1520 emit_insn_before (seq, insn);
1525 /* Handle a straight copy from a virtual register by generating a
1526 new add insn. The difference between this and falling through
1527 to the generic case is avoiding a new pseudo and eliminating a
1528 move insn in the initial rtl stream. */
1529 new_rtx = instantiate_new_reg (SET_SRC (set), &offset);
1530 if (new_rtx && offset != 0
1531 && REG_P (SET_DEST (set))
1532 && REGNO (SET_DEST (set)) > LAST_VIRTUAL_REGISTER)
1536 x = expand_simple_binop (GET_MODE (SET_DEST (set)), PLUS,
1537 new_rtx, GEN_INT (offset), SET_DEST (set),
1538 1, OPTAB_LIB_WIDEN);
1539 if (x != SET_DEST (set))
1540 emit_move_insn (SET_DEST (set), x);
1545 emit_insn_before (seq, insn);
1550 extract_insn (insn);
1551 insn_code = INSN_CODE (insn);
1553 /* Handle a plus involving a virtual register by determining if the
1554 operands remain valid if they're modified in place. */
1555 if (GET_CODE (SET_SRC (set)) == PLUS
1556 && recog_data.n_operands >= 3
1557 && recog_data.operand_loc[1] == &XEXP (SET_SRC (set), 0)
1558 && recog_data.operand_loc[2] == &XEXP (SET_SRC (set), 1)
1559 && CONST_INT_P (recog_data.operand[2])
1560 && (new_rtx = instantiate_new_reg (recog_data.operand[1], &offset)))
1562 offset += INTVAL (recog_data.operand[2]);
1564 /* If the sum is zero, then replace with a plain move. */
1566 && REG_P (SET_DEST (set))
1567 && REGNO (SET_DEST (set)) > LAST_VIRTUAL_REGISTER)
1570 emit_move_insn (SET_DEST (set), new_rtx);
1574 emit_insn_before (seq, insn);
1579 x = gen_int_mode (offset, recog_data.operand_mode[2]);
1581 /* Using validate_change and apply_change_group here leaves
1582 recog_data in an invalid state. Since we know exactly what
1583 we want to check, do those two by hand. */
1584 if (safe_insn_predicate (insn_code, 1, new_rtx)
1585 && safe_insn_predicate (insn_code, 2, x))
1587 *recog_data.operand_loc[1] = recog_data.operand[1] = new_rtx;
1588 *recog_data.operand_loc[2] = recog_data.operand[2] = x;
1591 /* Fall through into the regular operand fixup loop in
1592 order to take care of operands other than 1 and 2. */
1598 extract_insn (insn);
1599 insn_code = INSN_CODE (insn);
1602 /* In the general case, we expect virtual registers to appear only in
1603 operands, and then only as either bare registers or inside memories. */
1604 for (i = 0; i < recog_data.n_operands; ++i)
1606 x = recog_data.operand[i];
1607 switch (GET_CODE (x))
1611 rtx addr = XEXP (x, 0);
1612 bool changed = false;
1614 for_each_rtx (&addr, instantiate_virtual_regs_in_rtx, &changed);
1619 x = replace_equiv_address (x, addr);
1620 /* It may happen that the address with the virtual reg
1621 was valid (e.g. based on the virtual stack reg, which might
1622 be acceptable to the predicates with all offsets), whereas
1623 the address now isn't anymore, for instance when the address
1624 is still offsetted, but the base reg isn't virtual-stack-reg
1625 anymore. Below we would do a force_reg on the whole operand,
1626 but this insn might actually only accept memory. Hence,
1627 before doing that last resort, try to reload the address into
1628 a register, so this operand stays a MEM. */
1629 if (!safe_insn_predicate (insn_code, i, x))
1631 addr = force_reg (GET_MODE (addr), addr);
1632 x = replace_equiv_address (x, addr);
1637 emit_insn_before (seq, insn);
1642 new_rtx = instantiate_new_reg (x, &offset);
1643 if (new_rtx == NULL)
1651 /* Careful, special mode predicates may have stuff in
1652 insn_data[insn_code].operand[i].mode that isn't useful
1653 to us for computing a new value. */
1654 /* ??? Recognize address_operand and/or "p" constraints
1655 to see if (plus new offset) is a valid before we put
1656 this through expand_simple_binop. */
1657 x = expand_simple_binop (GET_MODE (x), PLUS, new_rtx,
1658 GEN_INT (offset), NULL_RTX,
1659 1, OPTAB_LIB_WIDEN);
1662 emit_insn_before (seq, insn);
1667 new_rtx = instantiate_new_reg (SUBREG_REG (x), &offset);
1668 if (new_rtx == NULL)
1673 new_rtx = expand_simple_binop (GET_MODE (new_rtx), PLUS, new_rtx,
1674 GEN_INT (offset), NULL_RTX,
1675 1, OPTAB_LIB_WIDEN);
1678 emit_insn_before (seq, insn);
1680 x = simplify_gen_subreg (recog_data.operand_mode[i], new_rtx,
1681 GET_MODE (new_rtx), SUBREG_BYTE (x));
1689 /* At this point, X contains the new value for the operand.
1690 Validate the new value vs the insn predicate. Note that
1691 asm insns will have insn_code -1 here. */
1692 if (!safe_insn_predicate (insn_code, i, x))
1697 gcc_assert (REGNO (x) <= LAST_VIRTUAL_REGISTER);
1698 x = copy_to_reg (x);
1701 x = force_reg (insn_data[insn_code].operand[i].mode, x);
1705 emit_insn_before (seq, insn);
1708 *recog_data.operand_loc[i] = recog_data.operand[i] = x;
1714 /* Propagate operand changes into the duplicates. */
1715 for (i = 0; i < recog_data.n_dups; ++i)
1716 *recog_data.dup_loc[i]
1717 = copy_rtx (recog_data.operand[(unsigned)recog_data.dup_num[i]]);
1719 /* Force re-recognition of the instruction for validation. */
1720 INSN_CODE (insn) = -1;
1723 if (asm_noperands (PATTERN (insn)) >= 0)
1725 if (!check_asm_operands (PATTERN (insn)))
1727 error_for_asm (insn, "impossible constraint in %<asm%>");
1733 if (recog_memoized (insn) < 0)
1734 fatal_insn_not_found (insn);
1738 /* Subroutine of instantiate_decls. Given RTL representing a decl,
1739 do any instantiation required. */
1742 instantiate_decl_rtl (rtx x)
1749 /* If this is a CONCAT, recurse for the pieces. */
1750 if (GET_CODE (x) == CONCAT)
1752 instantiate_decl_rtl (XEXP (x, 0));
1753 instantiate_decl_rtl (XEXP (x, 1));
1757 /* If this is not a MEM, no need to do anything. Similarly if the
1758 address is a constant or a register that is not a virtual register. */
1763 if (CONSTANT_P (addr)
1765 && (REGNO (addr) < FIRST_VIRTUAL_REGISTER
1766 || REGNO (addr) > LAST_VIRTUAL_REGISTER)))
1769 for_each_rtx (&XEXP (x, 0), instantiate_virtual_regs_in_rtx, NULL);
1772 /* Helper for instantiate_decls called via walk_tree: Process all decls
1773 in the given DECL_VALUE_EXPR. */
1776 instantiate_expr (tree *tp, int *walk_subtrees, void *data ATTRIBUTE_UNUSED)
1782 if (DECL_P (t) && DECL_RTL_SET_P (t))
1783 instantiate_decl_rtl (DECL_RTL (t));
1788 /* Subroutine of instantiate_decls: Process all decls in the given
1789 BLOCK node and all its subblocks. */
1792 instantiate_decls_1 (tree let)
1796 for (t = BLOCK_VARS (let); t; t = DECL_CHAIN (t))
1798 if (DECL_RTL_SET_P (t))
1799 instantiate_decl_rtl (DECL_RTL (t));
1800 if (TREE_CODE (t) == VAR_DECL && DECL_HAS_VALUE_EXPR_P (t))
1802 tree v = DECL_VALUE_EXPR (t);
1803 walk_tree (&v, instantiate_expr, NULL, NULL);
1807 /* Process all subblocks. */
1808 for (t = BLOCK_SUBBLOCKS (let); t; t = BLOCK_CHAIN (t))
1809 instantiate_decls_1 (t);
1812 /* Scan all decls in FNDECL (both variables and parameters) and instantiate
1813 all virtual registers in their DECL_RTL's. */
1816 instantiate_decls (tree fndecl)
1821 /* Process all parameters of the function. */
1822 for (decl = DECL_ARGUMENTS (fndecl); decl; decl = DECL_CHAIN (decl))
1824 instantiate_decl_rtl (DECL_RTL (decl));
1825 instantiate_decl_rtl (DECL_INCOMING_RTL (decl));
1826 if (DECL_HAS_VALUE_EXPR_P (decl))
1828 tree v = DECL_VALUE_EXPR (decl);
1829 walk_tree (&v, instantiate_expr, NULL, NULL);
1833 /* Now process all variables defined in the function or its subblocks. */
1834 instantiate_decls_1 (DECL_INITIAL (fndecl));
1836 FOR_EACH_LOCAL_DECL (cfun, ix, decl)
1837 if (DECL_RTL_SET_P (decl))
1838 instantiate_decl_rtl (DECL_RTL (decl));
1839 VEC_free (tree, gc, cfun->local_decls);
1842 /* Pass through the INSNS of function FNDECL and convert virtual register
1843 references to hard register references. */
1846 instantiate_virtual_regs (void)
1850 /* Compute the offsets to use for this function. */
1851 in_arg_offset = FIRST_PARM_OFFSET (current_function_decl);
1852 var_offset = STARTING_FRAME_OFFSET;
1853 dynamic_offset = STACK_DYNAMIC_OFFSET (current_function_decl);
1854 out_arg_offset = STACK_POINTER_OFFSET;
1855 #ifdef FRAME_POINTER_CFA_OFFSET
1856 cfa_offset = FRAME_POINTER_CFA_OFFSET (current_function_decl);
1858 cfa_offset = ARG_POINTER_CFA_OFFSET (current_function_decl);
1861 /* Initialize recognition, indicating that volatile is OK. */
1864 /* Scan through all the insns, instantiating every virtual register still
1866 for (insn = get_insns (); insn; insn = NEXT_INSN (insn))
1869 /* These patterns in the instruction stream can never be recognized.
1870 Fortunately, they shouldn't contain virtual registers either. */
1871 if (GET_CODE (PATTERN (insn)) == USE
1872 || GET_CODE (PATTERN (insn)) == CLOBBER
1873 || GET_CODE (PATTERN (insn)) == ADDR_VEC
1874 || GET_CODE (PATTERN (insn)) == ADDR_DIFF_VEC
1875 || GET_CODE (PATTERN (insn)) == ASM_INPUT)
1877 else if (DEBUG_INSN_P (insn))
1878 for_each_rtx (&INSN_VAR_LOCATION (insn),
1879 instantiate_virtual_regs_in_rtx, NULL);
1881 instantiate_virtual_regs_in_insn (insn);
1883 if (INSN_DELETED_P (insn))
1886 for_each_rtx (®_NOTES (insn), instantiate_virtual_regs_in_rtx, NULL);
1888 /* Instantiate any virtual registers in CALL_INSN_FUNCTION_USAGE. */
1890 for_each_rtx (&CALL_INSN_FUNCTION_USAGE (insn),
1891 instantiate_virtual_regs_in_rtx, NULL);
1894 /* Instantiate the virtual registers in the DECLs for debugging purposes. */
1895 instantiate_decls (current_function_decl);
1897 targetm.instantiate_decls ();
1899 /* Indicate that, from now on, assign_stack_local should use
1900 frame_pointer_rtx. */
1901 virtuals_instantiated = 1;
1905 struct rtl_opt_pass pass_instantiate_virtual_regs =
1911 instantiate_virtual_regs, /* execute */
1914 0, /* static_pass_number */
1915 TV_NONE, /* tv_id */
1916 0, /* properties_required */
1917 0, /* properties_provided */
1918 0, /* properties_destroyed */
1919 0, /* todo_flags_start */
1920 TODO_dump_func /* todo_flags_finish */
1925 /* Return 1 if EXP is an aggregate type (or a value with aggregate type).
1926 This means a type for which function calls must pass an address to the
1927 function or get an address back from the function.
1928 EXP may be a type node or an expression (whose type is tested). */
1931 aggregate_value_p (const_tree exp, const_tree fntype)
1933 const_tree type = (TYPE_P (exp)) ? exp : TREE_TYPE (exp);
1934 int i, regno, nregs;
1938 switch (TREE_CODE (fntype))
1942 tree fndecl = get_callee_fndecl (fntype);
1944 ? TREE_TYPE (fndecl)
1945 : TREE_TYPE (TREE_TYPE (CALL_EXPR_FN (fntype))));
1949 fntype = TREE_TYPE (fntype);
1954 case IDENTIFIER_NODE:
1958 /* We don't expect other tree types here. */
1962 if (VOID_TYPE_P (type))
1965 /* If a record should be passed the same as its first (and only) member
1966 don't pass it as an aggregate. */
1967 if (TREE_CODE (type) == RECORD_TYPE && TYPE_TRANSPARENT_AGGR (type))
1968 return aggregate_value_p (first_field (type), fntype);
1970 /* If the front end has decided that this needs to be passed by
1971 reference, do so. */
1972 if ((TREE_CODE (exp) == PARM_DECL || TREE_CODE (exp) == RESULT_DECL)
1973 && DECL_BY_REFERENCE (exp))
1976 /* Function types that are TREE_ADDRESSABLE force return in memory. */
1977 if (fntype && TREE_ADDRESSABLE (fntype))
1980 /* Types that are TREE_ADDRESSABLE must be constructed in memory,
1981 and thus can't be returned in registers. */
1982 if (TREE_ADDRESSABLE (type))
1985 if (flag_pcc_struct_return && AGGREGATE_TYPE_P (type))
1988 if (targetm.calls.return_in_memory (type, fntype))
1991 /* Make sure we have suitable call-clobbered regs to return
1992 the value in; if not, we must return it in memory. */
1993 reg = hard_function_value (type, 0, fntype, 0);
1995 /* If we have something other than a REG (e.g. a PARALLEL), then assume
2000 regno = REGNO (reg);
2001 nregs = hard_regno_nregs[regno][TYPE_MODE (type)];
2002 for (i = 0; i < nregs; i++)
2003 if (! call_used_regs[regno + i])
2009 /* Return true if we should assign DECL a pseudo register; false if it
2010 should live on the local stack. */
2013 use_register_for_decl (const_tree decl)
2015 if (!targetm.calls.allocate_stack_slots_for_args())
2018 /* Honor volatile. */
2019 if (TREE_SIDE_EFFECTS (decl))
2022 /* Honor addressability. */
2023 if (TREE_ADDRESSABLE (decl))
2026 /* Only register-like things go in registers. */
2027 if (DECL_MODE (decl) == BLKmode)
2030 /* If -ffloat-store specified, don't put explicit float variables
2032 /* ??? This should be checked after DECL_ARTIFICIAL, but tree-ssa
2033 propagates values across these stores, and it probably shouldn't. */
2034 if (flag_float_store && FLOAT_TYPE_P (TREE_TYPE (decl)))
2037 /* If we're not interested in tracking debugging information for
2038 this decl, then we can certainly put it in a register. */
2039 if (DECL_IGNORED_P (decl))
2045 if (!DECL_REGISTER (decl))
2048 switch (TREE_CODE (TREE_TYPE (decl)))
2052 case QUAL_UNION_TYPE:
2053 /* When not optimizing, disregard register keyword for variables with
2054 types containing methods, otherwise the methods won't be callable
2055 from the debugger. */
2056 if (TYPE_METHODS (TREE_TYPE (decl)))
2066 /* Return true if TYPE should be passed by invisible reference. */
2069 pass_by_reference (CUMULATIVE_ARGS *ca, enum machine_mode mode,
2070 tree type, bool named_arg)
2074 /* If this type contains non-trivial constructors, then it is
2075 forbidden for the middle-end to create any new copies. */
2076 if (TREE_ADDRESSABLE (type))
2079 /* GCC post 3.4 passes *all* variable sized types by reference. */
2080 if (!TYPE_SIZE (type) || TREE_CODE (TYPE_SIZE (type)) != INTEGER_CST)
2083 /* If a record type should be passed the same as its first (and only)
2084 member, use the type and mode of that member. */
2085 if (TREE_CODE (type) == RECORD_TYPE && TYPE_TRANSPARENT_AGGR (type))
2087 type = TREE_TYPE (first_field (type));
2088 mode = TYPE_MODE (type);
2092 return targetm.calls.pass_by_reference (ca, mode, type, named_arg);
2095 /* Return true if TYPE, which is passed by reference, should be callee
2096 copied instead of caller copied. */
2099 reference_callee_copied (CUMULATIVE_ARGS *ca, enum machine_mode mode,
2100 tree type, bool named_arg)
2102 if (type && TREE_ADDRESSABLE (type))
2104 return targetm.calls.callee_copies (ca, mode, type, named_arg);
2107 /* Structures to communicate between the subroutines of assign_parms.
2108 The first holds data persistent across all parameters, the second
2109 is cleared out for each parameter. */
2111 struct assign_parm_data_all
2113 CUMULATIVE_ARGS args_so_far;
2114 struct args_size stack_args_size;
2115 tree function_result_decl;
2117 rtx first_conversion_insn;
2118 rtx last_conversion_insn;
2119 HOST_WIDE_INT pretend_args_size;
2120 HOST_WIDE_INT extra_pretend_bytes;
2121 int reg_parm_stack_space;
2124 struct assign_parm_data_one
2130 enum machine_mode nominal_mode;
2131 enum machine_mode passed_mode;
2132 enum machine_mode promoted_mode;
2133 struct locate_and_pad_arg_data locate;
2135 BOOL_BITFIELD named_arg : 1;
2136 BOOL_BITFIELD passed_pointer : 1;
2137 BOOL_BITFIELD on_stack : 1;
2138 BOOL_BITFIELD loaded_in_reg : 1;
2141 /* A subroutine of assign_parms. Initialize ALL. */
2144 assign_parms_initialize_all (struct assign_parm_data_all *all)
2146 tree fntype ATTRIBUTE_UNUSED;
2148 memset (all, 0, sizeof (*all));
2150 fntype = TREE_TYPE (current_function_decl);
2152 #ifdef INIT_CUMULATIVE_INCOMING_ARGS
2153 INIT_CUMULATIVE_INCOMING_ARGS (all->args_so_far, fntype, NULL_RTX);
2155 INIT_CUMULATIVE_ARGS (all->args_so_far, fntype, NULL_RTX,
2156 current_function_decl, -1);
2159 #ifdef REG_PARM_STACK_SPACE
2160 all->reg_parm_stack_space = REG_PARM_STACK_SPACE (current_function_decl);
2164 /* If ARGS contains entries with complex types, split the entry into two
2165 entries of the component type. Return a new list of substitutions are
2166 needed, else the old list. */
2169 split_complex_args (VEC(tree, heap) **args)
2174 for (i = 0; VEC_iterate (tree, *args, i, p); ++i)
2176 tree type = TREE_TYPE (p);
2177 if (TREE_CODE (type) == COMPLEX_TYPE
2178 && targetm.calls.split_complex_arg (type))
2181 tree subtype = TREE_TYPE (type);
2182 bool addressable = TREE_ADDRESSABLE (p);
2184 /* Rewrite the PARM_DECL's type with its component. */
2186 TREE_TYPE (p) = subtype;
2187 DECL_ARG_TYPE (p) = TREE_TYPE (DECL_ARG_TYPE (p));
2188 DECL_MODE (p) = VOIDmode;
2189 DECL_SIZE (p) = NULL;
2190 DECL_SIZE_UNIT (p) = NULL;
2191 /* If this arg must go in memory, put it in a pseudo here.
2192 We can't allow it to go in memory as per normal parms,
2193 because the usual place might not have the imag part
2194 adjacent to the real part. */
2195 DECL_ARTIFICIAL (p) = addressable;
2196 DECL_IGNORED_P (p) = addressable;
2197 TREE_ADDRESSABLE (p) = 0;
2199 VEC_replace (tree, *args, i, p);
2201 /* Build a second synthetic decl. */
2202 decl = build_decl (EXPR_LOCATION (p),
2203 PARM_DECL, NULL_TREE, subtype);
2204 DECL_ARG_TYPE (decl) = DECL_ARG_TYPE (p);
2205 DECL_ARTIFICIAL (decl) = addressable;
2206 DECL_IGNORED_P (decl) = addressable;
2207 layout_decl (decl, 0);
2208 VEC_safe_insert (tree, heap, *args, ++i, decl);
2213 /* A subroutine of assign_parms. Adjust the parameter list to incorporate
2214 the hidden struct return argument, and (abi willing) complex args.
2215 Return the new parameter list. */
2217 static VEC(tree, heap) *
2218 assign_parms_augmented_arg_list (struct assign_parm_data_all *all)
2220 tree fndecl = current_function_decl;
2221 tree fntype = TREE_TYPE (fndecl);
2222 VEC(tree, heap) *fnargs = NULL;
2225 for (arg = DECL_ARGUMENTS (fndecl); arg; arg = DECL_CHAIN (arg))
2226 VEC_safe_push (tree, heap, fnargs, arg);
2228 all->orig_fnargs = DECL_ARGUMENTS (fndecl);
2230 /* If struct value address is treated as the first argument, make it so. */
2231 if (aggregate_value_p (DECL_RESULT (fndecl), fndecl)
2232 && ! cfun->returns_pcc_struct
2233 && targetm.calls.struct_value_rtx (TREE_TYPE (fndecl), 1) == 0)
2235 tree type = build_pointer_type (TREE_TYPE (fntype));
2238 decl = build_decl (DECL_SOURCE_LOCATION (fndecl),
2239 PARM_DECL, NULL_TREE, type);
2240 DECL_ARG_TYPE (decl) = type;
2241 DECL_ARTIFICIAL (decl) = 1;
2242 DECL_IGNORED_P (decl) = 1;
2244 DECL_CHAIN (decl) = all->orig_fnargs;
2245 all->orig_fnargs = decl;
2246 VEC_safe_insert (tree, heap, fnargs, 0, decl);
2248 all->function_result_decl = decl;
2251 /* If the target wants to split complex arguments into scalars, do so. */
2252 if (targetm.calls.split_complex_arg)
2253 split_complex_args (&fnargs);
2258 /* A subroutine of assign_parms. Examine PARM and pull out type and mode
2259 data for the parameter. Incorporate ABI specifics such as pass-by-
2260 reference and type promotion. */
2263 assign_parm_find_data_types (struct assign_parm_data_all *all, tree parm,
2264 struct assign_parm_data_one *data)
2266 tree nominal_type, passed_type;
2267 enum machine_mode nominal_mode, passed_mode, promoted_mode;
2270 memset (data, 0, sizeof (*data));
2272 /* NAMED_ARG is a misnomer. We really mean 'non-variadic'. */
2274 data->named_arg = 1; /* No variadic parms. */
2275 else if (DECL_CHAIN (parm))
2276 data->named_arg = 1; /* Not the last non-variadic parm. */
2277 else if (targetm.calls.strict_argument_naming (&all->args_so_far))
2278 data->named_arg = 1; /* Only variadic ones are unnamed. */
2280 data->named_arg = 0; /* Treat as variadic. */
2282 nominal_type = TREE_TYPE (parm);
2283 passed_type = DECL_ARG_TYPE (parm);
2285 /* Look out for errors propagating this far. Also, if the parameter's
2286 type is void then its value doesn't matter. */
2287 if (TREE_TYPE (parm) == error_mark_node
2288 /* This can happen after weird syntax errors
2289 or if an enum type is defined among the parms. */
2290 || TREE_CODE (parm) != PARM_DECL
2291 || passed_type == NULL
2292 || VOID_TYPE_P (nominal_type))
2294 nominal_type = passed_type = void_type_node;
2295 nominal_mode = passed_mode = promoted_mode = VOIDmode;
2299 /* Find mode of arg as it is passed, and mode of arg as it should be
2300 during execution of this function. */
2301 passed_mode = TYPE_MODE (passed_type);
2302 nominal_mode = TYPE_MODE (nominal_type);
2304 /* If the parm is to be passed as a transparent union or record, use the
2305 type of the first field for the tests below. We have already verified
2306 that the modes are the same. */
2307 if ((TREE_CODE (passed_type) == UNION_TYPE
2308 || TREE_CODE (passed_type) == RECORD_TYPE)
2309 && TYPE_TRANSPARENT_AGGR (passed_type))
2310 passed_type = TREE_TYPE (first_field (passed_type));
2312 /* See if this arg was passed by invisible reference. */
2313 if (pass_by_reference (&all->args_so_far, passed_mode,
2314 passed_type, data->named_arg))
2316 passed_type = nominal_type = build_pointer_type (passed_type);
2317 data->passed_pointer = true;
2318 passed_mode = nominal_mode = Pmode;
2321 /* Find mode as it is passed by the ABI. */
2322 unsignedp = TYPE_UNSIGNED (passed_type);
2323 promoted_mode = promote_function_mode (passed_type, passed_mode, &unsignedp,
2324 TREE_TYPE (current_function_decl), 0);
2327 data->nominal_type = nominal_type;
2328 data->passed_type = passed_type;
2329 data->nominal_mode = nominal_mode;
2330 data->passed_mode = passed_mode;
2331 data->promoted_mode = promoted_mode;
2334 /* A subroutine of assign_parms. Invoke setup_incoming_varargs. */
2337 assign_parms_setup_varargs (struct assign_parm_data_all *all,
2338 struct assign_parm_data_one *data, bool no_rtl)
2340 int varargs_pretend_bytes = 0;
2342 targetm.calls.setup_incoming_varargs (&all->args_so_far,
2343 data->promoted_mode,
2345 &varargs_pretend_bytes, no_rtl);
2347 /* If the back-end has requested extra stack space, record how much is
2348 needed. Do not change pretend_args_size otherwise since it may be
2349 nonzero from an earlier partial argument. */
2350 if (varargs_pretend_bytes > 0)
2351 all->pretend_args_size = varargs_pretend_bytes;
2354 /* A subroutine of assign_parms. Set DATA->ENTRY_PARM corresponding to
2355 the incoming location of the current parameter. */
2358 assign_parm_find_entry_rtl (struct assign_parm_data_all *all,
2359 struct assign_parm_data_one *data)
2361 HOST_WIDE_INT pretend_bytes = 0;
2365 if (data->promoted_mode == VOIDmode)
2367 data->entry_parm = data->stack_parm = const0_rtx;
2371 entry_parm = targetm.calls.function_incoming_arg (&all->args_so_far,
2372 data->promoted_mode,
2376 if (entry_parm == 0)
2377 data->promoted_mode = data->passed_mode;
2379 /* Determine parm's home in the stack, in case it arrives in the stack
2380 or we should pretend it did. Compute the stack position and rtx where
2381 the argument arrives and its size.
2383 There is one complexity here: If this was a parameter that would
2384 have been passed in registers, but wasn't only because it is
2385 __builtin_va_alist, we want locate_and_pad_parm to treat it as if
2386 it came in a register so that REG_PARM_STACK_SPACE isn't skipped.
2387 In this case, we call FUNCTION_ARG with NAMED set to 1 instead of 0
2388 as it was the previous time. */
2389 in_regs = entry_parm != 0;
2390 #ifdef STACK_PARMS_IN_REG_PARM_AREA
2393 if (!in_regs && !data->named_arg)
2395 if (targetm.calls.pretend_outgoing_varargs_named (&all->args_so_far))
2398 tem = targetm.calls.function_incoming_arg (&all->args_so_far,
2399 data->promoted_mode,
2400 data->passed_type, true);
2401 in_regs = tem != NULL;
2405 /* If this parameter was passed both in registers and in the stack, use
2406 the copy on the stack. */
2407 if (targetm.calls.must_pass_in_stack (data->promoted_mode,
2415 partial = targetm.calls.arg_partial_bytes (&all->args_so_far,
2416 data->promoted_mode,
2419 data->partial = partial;
2421 /* The caller might already have allocated stack space for the
2422 register parameters. */
2423 if (partial != 0 && all->reg_parm_stack_space == 0)
2425 /* Part of this argument is passed in registers and part
2426 is passed on the stack. Ask the prologue code to extend
2427 the stack part so that we can recreate the full value.
2429 PRETEND_BYTES is the size of the registers we need to store.
2430 CURRENT_FUNCTION_PRETEND_ARGS_SIZE is the amount of extra
2431 stack space that the prologue should allocate.
2433 Internally, gcc assumes that the argument pointer is aligned
2434 to STACK_BOUNDARY bits. This is used both for alignment
2435 optimizations (see init_emit) and to locate arguments that are
2436 aligned to more than PARM_BOUNDARY bits. We must preserve this
2437 invariant by rounding CURRENT_FUNCTION_PRETEND_ARGS_SIZE up to
2438 a stack boundary. */
2440 /* We assume at most one partial arg, and it must be the first
2441 argument on the stack. */
2442 gcc_assert (!all->extra_pretend_bytes && !all->pretend_args_size);
2444 pretend_bytes = partial;
2445 all->pretend_args_size = CEIL_ROUND (pretend_bytes, STACK_BYTES);
2447 /* We want to align relative to the actual stack pointer, so
2448 don't include this in the stack size until later. */
2449 all->extra_pretend_bytes = all->pretend_args_size;
2453 locate_and_pad_parm (data->promoted_mode, data->passed_type, in_regs,
2454 entry_parm ? data->partial : 0, current_function_decl,
2455 &all->stack_args_size, &data->locate);
2457 /* Update parm_stack_boundary if this parameter is passed in the
2459 if (!in_regs && crtl->parm_stack_boundary < data->locate.boundary)
2460 crtl->parm_stack_boundary = data->locate.boundary;
2462 /* Adjust offsets to include the pretend args. */
2463 pretend_bytes = all->extra_pretend_bytes - pretend_bytes;
2464 data->locate.slot_offset.constant += pretend_bytes;
2465 data->locate.offset.constant += pretend_bytes;
2467 data->entry_parm = entry_parm;
2470 /* A subroutine of assign_parms. If there is actually space on the stack
2471 for this parm, count it in stack_args_size and return true. */
2474 assign_parm_is_stack_parm (struct assign_parm_data_all *all,
2475 struct assign_parm_data_one *data)
2477 /* Trivially true if we've no incoming register. */
2478 if (data->entry_parm == NULL)
2480 /* Also true if we're partially in registers and partially not,
2481 since we've arranged to drop the entire argument on the stack. */
2482 else if (data->partial != 0)
2484 /* Also true if the target says that it's passed in both registers
2485 and on the stack. */
2486 else if (GET_CODE (data->entry_parm) == PARALLEL
2487 && XEXP (XVECEXP (data->entry_parm, 0, 0), 0) == NULL_RTX)
2489 /* Also true if the target says that there's stack allocated for
2490 all register parameters. */
2491 else if (all->reg_parm_stack_space > 0)
2493 /* Otherwise, no, this parameter has no ABI defined stack slot. */
2497 all->stack_args_size.constant += data->locate.size.constant;
2498 if (data->locate.size.var)
2499 ADD_PARM_SIZE (all->stack_args_size, data->locate.size.var);
2504 /* A subroutine of assign_parms. Given that this parameter is allocated
2505 stack space by the ABI, find it. */
2508 assign_parm_find_stack_rtl (tree parm, struct assign_parm_data_one *data)
2510 rtx offset_rtx, stack_parm;
2511 unsigned int align, boundary;
2513 /* If we're passing this arg using a reg, make its stack home the
2514 aligned stack slot. */
2515 if (data->entry_parm)
2516 offset_rtx = ARGS_SIZE_RTX (data->locate.slot_offset);
2518 offset_rtx = ARGS_SIZE_RTX (data->locate.offset);
2520 stack_parm = crtl->args.internal_arg_pointer;
2521 if (offset_rtx != const0_rtx)
2522 stack_parm = gen_rtx_PLUS (Pmode, stack_parm, offset_rtx);
2523 stack_parm = gen_rtx_MEM (data->promoted_mode, stack_parm);
2525 if (!data->passed_pointer)
2527 set_mem_attributes (stack_parm, parm, 1);
2528 /* set_mem_attributes could set MEM_SIZE to the passed mode's size,
2529 while promoted mode's size is needed. */
2530 if (data->promoted_mode != BLKmode
2531 && data->promoted_mode != DECL_MODE (parm))
2533 set_mem_size (stack_parm,
2534 GEN_INT (GET_MODE_SIZE (data->promoted_mode)));
2535 if (MEM_EXPR (stack_parm) && MEM_OFFSET (stack_parm))
2537 int offset = subreg_lowpart_offset (DECL_MODE (parm),
2538 data->promoted_mode);
2540 set_mem_offset (stack_parm,
2541 plus_constant (MEM_OFFSET (stack_parm),
2547 boundary = data->locate.boundary;
2548 align = BITS_PER_UNIT;
2550 /* If we're padding upward, we know that the alignment of the slot
2551 is FUNCTION_ARG_BOUNDARY. If we're using slot_offset, we're
2552 intentionally forcing upward padding. Otherwise we have to come
2553 up with a guess at the alignment based on OFFSET_RTX. */
2554 if (data->locate.where_pad != downward || data->entry_parm)
2556 else if (CONST_INT_P (offset_rtx))
2558 align = INTVAL (offset_rtx) * BITS_PER_UNIT | boundary;
2559 align = align & -align;
2561 set_mem_align (stack_parm, align);
2563 if (data->entry_parm)
2564 set_reg_attrs_for_parm (data->entry_parm, stack_parm);
2566 data->stack_parm = stack_parm;
2569 /* A subroutine of assign_parms. Adjust DATA->ENTRY_RTL such that it's
2570 always valid and contiguous. */
2573 assign_parm_adjust_entry_rtl (struct assign_parm_data_one *data)
2575 rtx entry_parm = data->entry_parm;
2576 rtx stack_parm = data->stack_parm;
2578 /* If this parm was passed part in regs and part in memory, pretend it
2579 arrived entirely in memory by pushing the register-part onto the stack.
2580 In the special case of a DImode or DFmode that is split, we could put
2581 it together in a pseudoreg directly, but for now that's not worth
2583 if (data->partial != 0)
2585 /* Handle calls that pass values in multiple non-contiguous
2586 locations. The Irix 6 ABI has examples of this. */
2587 if (GET_CODE (entry_parm) == PARALLEL)
2588 emit_group_store (validize_mem (stack_parm), entry_parm,
2590 int_size_in_bytes (data->passed_type));
2593 gcc_assert (data->partial % UNITS_PER_WORD == 0);
2594 move_block_from_reg (REGNO (entry_parm), validize_mem (stack_parm),
2595 data->partial / UNITS_PER_WORD);
2598 entry_parm = stack_parm;
2601 /* If we didn't decide this parm came in a register, by default it came
2603 else if (entry_parm == NULL)
2604 entry_parm = stack_parm;
2606 /* When an argument is passed in multiple locations, we can't make use
2607 of this information, but we can save some copying if the whole argument
2608 is passed in a single register. */
2609 else if (GET_CODE (entry_parm) == PARALLEL
2610 && data->nominal_mode != BLKmode
2611 && data->passed_mode != BLKmode)
2613 size_t i, len = XVECLEN (entry_parm, 0);
2615 for (i = 0; i < len; i++)
2616 if (XEXP (XVECEXP (entry_parm, 0, i), 0) != NULL_RTX
2617 && REG_P (XEXP (XVECEXP (entry_parm, 0, i), 0))
2618 && (GET_MODE (XEXP (XVECEXP (entry_parm, 0, i), 0))
2619 == data->passed_mode)
2620 && INTVAL (XEXP (XVECEXP (entry_parm, 0, i), 1)) == 0)
2622 entry_parm = XEXP (XVECEXP (entry_parm, 0, i), 0);
2627 data->entry_parm = entry_parm;
2630 /* A subroutine of assign_parms. Reconstitute any values which were
2631 passed in multiple registers and would fit in a single register. */
2634 assign_parm_remove_parallels (struct assign_parm_data_one *data)
2636 rtx entry_parm = data->entry_parm;
2638 /* Convert the PARALLEL to a REG of the same mode as the parallel.
2639 This can be done with register operations rather than on the
2640 stack, even if we will store the reconstituted parameter on the
2642 if (GET_CODE (entry_parm) == PARALLEL && GET_MODE (entry_parm) != BLKmode)
2644 rtx parmreg = gen_reg_rtx (GET_MODE (entry_parm));
2645 emit_group_store (parmreg, entry_parm, data->passed_type,
2646 GET_MODE_SIZE (GET_MODE (entry_parm)));
2647 entry_parm = parmreg;
2650 data->entry_parm = entry_parm;
2653 /* A subroutine of assign_parms. Adjust DATA->STACK_RTL such that it's
2654 always valid and properly aligned. */
2657 assign_parm_adjust_stack_rtl (struct assign_parm_data_one *data)
2659 rtx stack_parm = data->stack_parm;
2661 /* If we can't trust the parm stack slot to be aligned enough for its
2662 ultimate type, don't use that slot after entry. We'll make another
2663 stack slot, if we need one. */
2665 && ((STRICT_ALIGNMENT
2666 && GET_MODE_ALIGNMENT (data->nominal_mode) > MEM_ALIGN (stack_parm))
2667 || (data->nominal_type
2668 && TYPE_ALIGN (data->nominal_type) > MEM_ALIGN (stack_parm)
2669 && MEM_ALIGN (stack_parm) < PREFERRED_STACK_BOUNDARY)))
2672 /* If parm was passed in memory, and we need to convert it on entry,
2673 don't store it back in that same slot. */
2674 else if (data->entry_parm == stack_parm
2675 && data->nominal_mode != BLKmode
2676 && data->nominal_mode != data->passed_mode)
2679 /* If stack protection is in effect for this function, don't leave any
2680 pointers in their passed stack slots. */
2681 else if (crtl->stack_protect_guard
2682 && (flag_stack_protect == 2
2683 || data->passed_pointer
2684 || POINTER_TYPE_P (data->nominal_type)))
2687 data->stack_parm = stack_parm;
2690 /* A subroutine of assign_parms. Return true if the current parameter
2691 should be stored as a BLKmode in the current frame. */
2694 assign_parm_setup_block_p (struct assign_parm_data_one *data)
2696 if (data->nominal_mode == BLKmode)
2698 if (GET_MODE (data->entry_parm) == BLKmode)
2701 #ifdef BLOCK_REG_PADDING
2702 /* Only assign_parm_setup_block knows how to deal with register arguments
2703 that are padded at the least significant end. */
2704 if (REG_P (data->entry_parm)
2705 && GET_MODE_SIZE (data->promoted_mode) < UNITS_PER_WORD
2706 && (BLOCK_REG_PADDING (data->passed_mode, data->passed_type, 1)
2707 == (BYTES_BIG_ENDIAN ? upward : downward)))
2714 /* A subroutine of assign_parms. Arrange for the parameter to be
2715 present and valid in DATA->STACK_RTL. */
2718 assign_parm_setup_block (struct assign_parm_data_all *all,
2719 tree parm, struct assign_parm_data_one *data)
2721 rtx entry_parm = data->entry_parm;
2722 rtx stack_parm = data->stack_parm;
2724 HOST_WIDE_INT size_stored;
2726 if (GET_CODE (entry_parm) == PARALLEL)
2727 entry_parm = emit_group_move_into_temps (entry_parm);
2729 size = int_size_in_bytes (data->passed_type);
2730 size_stored = CEIL_ROUND (size, UNITS_PER_WORD);
2731 if (stack_parm == 0)
2733 DECL_ALIGN (parm) = MAX (DECL_ALIGN (parm), BITS_PER_WORD);
2734 stack_parm = assign_stack_local (BLKmode, size_stored,
2736 if (GET_MODE_SIZE (GET_MODE (entry_parm)) == size)
2737 PUT_MODE (stack_parm, GET_MODE (entry_parm));
2738 set_mem_attributes (stack_parm, parm, 1);
2741 /* If a BLKmode arrives in registers, copy it to a stack slot. Handle
2742 calls that pass values in multiple non-contiguous locations. */
2743 if (REG_P (entry_parm) || GET_CODE (entry_parm) == PARALLEL)
2747 /* Note that we will be storing an integral number of words.
2748 So we have to be careful to ensure that we allocate an
2749 integral number of words. We do this above when we call
2750 assign_stack_local if space was not allocated in the argument
2751 list. If it was, this will not work if PARM_BOUNDARY is not
2752 a multiple of BITS_PER_WORD. It isn't clear how to fix this
2753 if it becomes a problem. Exception is when BLKmode arrives
2754 with arguments not conforming to word_mode. */
2756 if (data->stack_parm == 0)
2758 else if (GET_CODE (entry_parm) == PARALLEL)
2761 gcc_assert (!size || !(PARM_BOUNDARY % BITS_PER_WORD));
2763 mem = validize_mem (stack_parm);
2765 /* Handle values in multiple non-contiguous locations. */
2766 if (GET_CODE (entry_parm) == PARALLEL)
2768 push_to_sequence2 (all->first_conversion_insn,
2769 all->last_conversion_insn);
2770 emit_group_store (mem, entry_parm, data->passed_type, size);
2771 all->first_conversion_insn = get_insns ();
2772 all->last_conversion_insn = get_last_insn ();
2779 /* If SIZE is that of a mode no bigger than a word, just use
2780 that mode's store operation. */
2781 else if (size <= UNITS_PER_WORD)
2783 enum machine_mode mode
2784 = mode_for_size (size * BITS_PER_UNIT, MODE_INT, 0);
2787 #ifdef BLOCK_REG_PADDING
2788 && (size == UNITS_PER_WORD
2789 || (BLOCK_REG_PADDING (mode, data->passed_type, 1)
2790 != (BYTES_BIG_ENDIAN ? upward : downward)))
2796 /* We are really truncating a word_mode value containing
2797 SIZE bytes into a value of mode MODE. If such an
2798 operation requires no actual instructions, we can refer
2799 to the value directly in mode MODE, otherwise we must
2800 start with the register in word_mode and explicitly
2802 if (TRULY_NOOP_TRUNCATION (size * BITS_PER_UNIT, BITS_PER_WORD))
2803 reg = gen_rtx_REG (mode, REGNO (entry_parm));
2806 reg = gen_rtx_REG (word_mode, REGNO (entry_parm));
2807 reg = convert_to_mode (mode, copy_to_reg (reg), 1);
2809 emit_move_insn (change_address (mem, mode, 0), reg);
2812 /* Blocks smaller than a word on a BYTES_BIG_ENDIAN
2813 machine must be aligned to the left before storing
2814 to memory. Note that the previous test doesn't
2815 handle all cases (e.g. SIZE == 3). */
2816 else if (size != UNITS_PER_WORD
2817 #ifdef BLOCK_REG_PADDING
2818 && (BLOCK_REG_PADDING (mode, data->passed_type, 1)
2826 int by = (UNITS_PER_WORD - size) * BITS_PER_UNIT;
2827 rtx reg = gen_rtx_REG (word_mode, REGNO (entry_parm));
2829 x = expand_shift (LSHIFT_EXPR, word_mode, reg,
2830 build_int_cst (NULL_TREE, by),
2832 tem = change_address (mem, word_mode, 0);
2833 emit_move_insn (tem, x);
2836 move_block_from_reg (REGNO (entry_parm), mem,
2837 size_stored / UNITS_PER_WORD);
2840 move_block_from_reg (REGNO (entry_parm), mem,
2841 size_stored / UNITS_PER_WORD);
2843 else if (data->stack_parm == 0)
2845 push_to_sequence2 (all->first_conversion_insn, all->last_conversion_insn);
2846 emit_block_move (stack_parm, data->entry_parm, GEN_INT (size),
2848 all->first_conversion_insn = get_insns ();
2849 all->last_conversion_insn = get_last_insn ();
2853 data->stack_parm = stack_parm;
2854 SET_DECL_RTL (parm, stack_parm);
2857 /* A subroutine of assign_parm_setup_reg, called through note_stores.
2858 This collects sets and clobbers of hard registers in a HARD_REG_SET,
2859 which is pointed to by DATA. */
2861 record_hard_reg_sets (rtx x, const_rtx pat ATTRIBUTE_UNUSED, void *data)
2863 HARD_REG_SET *pset = (HARD_REG_SET *)data;
2864 if (REG_P (x) && REGNO (x) < FIRST_PSEUDO_REGISTER)
2866 int nregs = hard_regno_nregs[REGNO (x)][GET_MODE (x)];
2868 SET_HARD_REG_BIT (*pset, REGNO (x) + nregs);
2872 /* A subroutine of assign_parms. Allocate a pseudo to hold the current
2873 parameter. Get it there. Perform all ABI specified conversions. */
2876 assign_parm_setup_reg (struct assign_parm_data_all *all, tree parm,
2877 struct assign_parm_data_one *data)
2879 rtx parmreg, validated_mem;
2880 rtx equiv_stack_parm;
2881 enum machine_mode promoted_nominal_mode;
2882 int unsignedp = TYPE_UNSIGNED (TREE_TYPE (parm));
2883 bool did_conversion = false;
2884 bool need_conversion, moved;
2886 /* Store the parm in a pseudoregister during the function, but we may
2887 need to do it in a wider mode. Using 2 here makes the result
2888 consistent with promote_decl_mode and thus expand_expr_real_1. */
2889 promoted_nominal_mode
2890 = promote_function_mode (data->nominal_type, data->nominal_mode, &unsignedp,
2891 TREE_TYPE (current_function_decl), 2);
2893 parmreg = gen_reg_rtx (promoted_nominal_mode);
2895 if (!DECL_ARTIFICIAL (parm))
2896 mark_user_reg (parmreg);
2898 /* If this was an item that we received a pointer to,
2899 set DECL_RTL appropriately. */
2900 if (data->passed_pointer)
2902 rtx x = gen_rtx_MEM (TYPE_MODE (TREE_TYPE (data->passed_type)), parmreg);
2903 set_mem_attributes (x, parm, 1);
2904 SET_DECL_RTL (parm, x);
2907 SET_DECL_RTL (parm, parmreg);
2909 assign_parm_remove_parallels (data);
2911 /* Copy the value into the register, thus bridging between
2912 assign_parm_find_data_types and expand_expr_real_1. */
2914 equiv_stack_parm = data->stack_parm;
2915 validated_mem = validize_mem (data->entry_parm);
2917 need_conversion = (data->nominal_mode != data->passed_mode
2918 || promoted_nominal_mode != data->promoted_mode);
2922 && GET_MODE_CLASS (data->nominal_mode) == MODE_INT
2923 && data->nominal_mode == data->passed_mode
2924 && data->nominal_mode == GET_MODE (data->entry_parm))
2926 /* ENTRY_PARM has been converted to PROMOTED_MODE, its
2927 mode, by the caller. We now have to convert it to
2928 NOMINAL_MODE, if different. However, PARMREG may be in
2929 a different mode than NOMINAL_MODE if it is being stored
2932 If ENTRY_PARM is a hard register, it might be in a register
2933 not valid for operating in its mode (e.g., an odd-numbered
2934 register for a DFmode). In that case, moves are the only
2935 thing valid, so we can't do a convert from there. This
2936 occurs when the calling sequence allow such misaligned
2939 In addition, the conversion may involve a call, which could
2940 clobber parameters which haven't been copied to pseudo
2943 First, we try to emit an insn which performs the necessary
2944 conversion. We verify that this insn does not clobber any
2947 enum insn_code icode;
2950 icode = can_extend_p (promoted_nominal_mode, data->passed_mode,
2954 op1 = validated_mem;
2955 if (icode != CODE_FOR_nothing
2956 && insn_data[icode].operand[0].predicate (op0, promoted_nominal_mode)
2957 && insn_data[icode].operand[1].predicate (op1, data->passed_mode))
2959 enum rtx_code code = unsignedp ? ZERO_EXTEND : SIGN_EXTEND;
2961 HARD_REG_SET hardregs;
2964 insn = gen_extend_insn (op0, op1, promoted_nominal_mode,
2965 data->passed_mode, unsignedp);
2967 insns = get_insns ();
2970 CLEAR_HARD_REG_SET (hardregs);
2971 for (insn = insns; insn && moved; insn = NEXT_INSN (insn))
2974 note_stores (PATTERN (insn), record_hard_reg_sets,
2976 if (!hard_reg_set_empty_p (hardregs))
2985 if (equiv_stack_parm != NULL_RTX)
2986 equiv_stack_parm = gen_rtx_fmt_e (code, GET_MODE (parmreg),
2993 /* Nothing to do. */
2995 else if (need_conversion)
2997 /* We did not have an insn to convert directly, or the sequence
2998 generated appeared unsafe. We must first copy the parm to a
2999 pseudo reg, and save the conversion until after all
3000 parameters have been moved. */
3003 rtx tempreg = gen_reg_rtx (GET_MODE (data->entry_parm));
3005 emit_move_insn (tempreg, validated_mem);
3007 push_to_sequence2 (all->first_conversion_insn, all->last_conversion_insn);
3008 tempreg = convert_to_mode (data->nominal_mode, tempreg, unsignedp);
3010 if (GET_CODE (tempreg) == SUBREG
3011 && GET_MODE (tempreg) == data->nominal_mode
3012 && REG_P (SUBREG_REG (tempreg))
3013 && data->nominal_mode == data->passed_mode
3014 && GET_MODE (SUBREG_REG (tempreg)) == GET_MODE (data->entry_parm)
3015 && GET_MODE_SIZE (GET_MODE (tempreg))
3016 < GET_MODE_SIZE (GET_MODE (data->entry_parm)))
3018 /* The argument is already sign/zero extended, so note it
3020 SUBREG_PROMOTED_VAR_P (tempreg) = 1;
3021 SUBREG_PROMOTED_UNSIGNED_SET (tempreg, unsignedp);
3024 /* TREE_USED gets set erroneously during expand_assignment. */
3025 save_tree_used = TREE_USED (parm);
3026 expand_assignment (parm, make_tree (data->nominal_type, tempreg), false);
3027 TREE_USED (parm) = save_tree_used;
3028 all->first_conversion_insn = get_insns ();
3029 all->last_conversion_insn = get_last_insn ();
3032 did_conversion = true;
3035 emit_move_insn (parmreg, validated_mem);
3037 /* If we were passed a pointer but the actual value can safely live
3038 in a register, put it in one. */
3039 if (data->passed_pointer
3040 && TYPE_MODE (TREE_TYPE (parm)) != BLKmode
3041 /* If by-reference argument was promoted, demote it. */
3042 && (TYPE_MODE (TREE_TYPE (parm)) != GET_MODE (DECL_RTL (parm))
3043 || use_register_for_decl (parm)))
3045 /* We can't use nominal_mode, because it will have been set to
3046 Pmode above. We must use the actual mode of the parm. */
3047 parmreg = gen_reg_rtx (TYPE_MODE (TREE_TYPE (parm)));
3048 mark_user_reg (parmreg);
3050 if (GET_MODE (parmreg) != GET_MODE (DECL_RTL (parm)))
3052 rtx tempreg = gen_reg_rtx (GET_MODE (DECL_RTL (parm)));
3053 int unsigned_p = TYPE_UNSIGNED (TREE_TYPE (parm));
3055 push_to_sequence2 (all->first_conversion_insn,
3056 all->last_conversion_insn);
3057 emit_move_insn (tempreg, DECL_RTL (parm));
3058 tempreg = convert_to_mode (GET_MODE (parmreg), tempreg, unsigned_p);
3059 emit_move_insn (parmreg, tempreg);
3060 all->first_conversion_insn = get_insns ();
3061 all->last_conversion_insn = get_last_insn ();
3064 did_conversion = true;
3067 emit_move_insn (parmreg, DECL_RTL (parm));
3069 SET_DECL_RTL (parm, parmreg);
3071 /* STACK_PARM is the pointer, not the parm, and PARMREG is
3073 data->stack_parm = NULL;
3076 /* Mark the register as eliminable if we did no conversion and it was
3077 copied from memory at a fixed offset, and the arg pointer was not
3078 copied to a pseudo-reg. If the arg pointer is a pseudo reg or the
3079 offset formed an invalid address, such memory-equivalences as we
3080 make here would screw up life analysis for it. */
3081 if (data->nominal_mode == data->passed_mode
3083 && data->stack_parm != 0
3084 && MEM_P (data->stack_parm)
3085 && data->locate.offset.var == 0
3086 && reg_mentioned_p (virtual_incoming_args_rtx,
3087 XEXP (data->stack_parm, 0)))
3089 rtx linsn = get_last_insn ();
3092 /* Mark complex types separately. */
3093 if (GET_CODE (parmreg) == CONCAT)
3095 enum machine_mode submode
3096 = GET_MODE_INNER (GET_MODE (parmreg));
3097 int regnor = REGNO (XEXP (parmreg, 0));
3098 int regnoi = REGNO (XEXP (parmreg, 1));
3099 rtx stackr = adjust_address_nv (data->stack_parm, submode, 0);
3100 rtx stacki = adjust_address_nv (data->stack_parm, submode,
3101 GET_MODE_SIZE (submode));
3103 /* Scan backwards for the set of the real and
3105 for (sinsn = linsn; sinsn != 0;
3106 sinsn = prev_nonnote_insn (sinsn))
3108 set = single_set (sinsn);
3112 if (SET_DEST (set) == regno_reg_rtx [regnoi])
3113 set_unique_reg_note (sinsn, REG_EQUIV, stacki);
3114 else if (SET_DEST (set) == regno_reg_rtx [regnor])
3115 set_unique_reg_note (sinsn, REG_EQUIV, stackr);
3118 else if ((set = single_set (linsn)) != 0
3119 && SET_DEST (set) == parmreg)
3120 set_unique_reg_note (linsn, REG_EQUIV, equiv_stack_parm);
3123 /* For pointer data type, suggest pointer register. */
3124 if (POINTER_TYPE_P (TREE_TYPE (parm)))
3125 mark_reg_pointer (parmreg,
3126 TYPE_ALIGN (TREE_TYPE (TREE_TYPE (parm))));
3129 /* A subroutine of assign_parms. Allocate stack space to hold the current
3130 parameter. Get it there. Perform all ABI specified conversions. */
3133 assign_parm_setup_stack (struct assign_parm_data_all *all, tree parm,
3134 struct assign_parm_data_one *data)
3136 /* Value must be stored in the stack slot STACK_PARM during function
3138 bool to_conversion = false;
3140 assign_parm_remove_parallels (data);
3142 if (data->promoted_mode != data->nominal_mode)
3144 /* Conversion is required. */
3145 rtx tempreg = gen_reg_rtx (GET_MODE (data->entry_parm));
3147 emit_move_insn (tempreg, validize_mem (data->entry_parm));
3149 push_to_sequence2 (all->first_conversion_insn, all->last_conversion_insn);
3150 to_conversion = true;
3152 data->entry_parm = convert_to_mode (data->nominal_mode, tempreg,
3153 TYPE_UNSIGNED (TREE_TYPE (parm)));
3155 if (data->stack_parm)
3157 int offset = subreg_lowpart_offset (data->nominal_mode,
3158 GET_MODE (data->stack_parm));
3159 /* ??? This may need a big-endian conversion on sparc64. */
3161 = adjust_address (data->stack_parm, data->nominal_mode, 0);
3162 if (offset && MEM_OFFSET (data->stack_parm))
3163 set_mem_offset (data->stack_parm,
3164 plus_constant (MEM_OFFSET (data->stack_parm),
3169 if (data->entry_parm != data->stack_parm)
3173 if (data->stack_parm == 0)
3175 int align = STACK_SLOT_ALIGNMENT (data->passed_type,
3176 GET_MODE (data->entry_parm),
3177 TYPE_ALIGN (data->passed_type));
3179 = assign_stack_local (GET_MODE (data->entry_parm),
3180 GET_MODE_SIZE (GET_MODE (data->entry_parm)),
3182 set_mem_attributes (data->stack_parm, parm, 1);
3185 dest = validize_mem (data->stack_parm);
3186 src = validize_mem (data->entry_parm);
3190 /* Use a block move to handle potentially misaligned entry_parm. */
3192 push_to_sequence2 (all->first_conversion_insn,
3193 all->last_conversion_insn);
3194 to_conversion = true;
3196 emit_block_move (dest, src,
3197 GEN_INT (int_size_in_bytes (data->passed_type)),
3201 emit_move_insn (dest, src);
3206 all->first_conversion_insn = get_insns ();
3207 all->last_conversion_insn = get_last_insn ();
3211 SET_DECL_RTL (parm, data->stack_parm);
3214 /* A subroutine of assign_parms. If the ABI splits complex arguments, then
3215 undo the frobbing that we did in assign_parms_augmented_arg_list. */
3218 assign_parms_unsplit_complex (struct assign_parm_data_all *all,
3219 VEC(tree, heap) *fnargs)
3222 tree orig_fnargs = all->orig_fnargs;
3225 for (parm = orig_fnargs; parm; parm = TREE_CHAIN (parm), ++i)
3227 if (TREE_CODE (TREE_TYPE (parm)) == COMPLEX_TYPE
3228 && targetm.calls.split_complex_arg (TREE_TYPE (parm)))
3230 rtx tmp, real, imag;
3231 enum machine_mode inner = GET_MODE_INNER (DECL_MODE (parm));
3233 real = DECL_RTL (VEC_index (tree, fnargs, i));
3234 imag = DECL_RTL (VEC_index (tree, fnargs, i + 1));
3235 if (inner != GET_MODE (real))
3237 real = gen_lowpart_SUBREG (inner, real);
3238 imag = gen_lowpart_SUBREG (inner, imag);
3241 if (TREE_ADDRESSABLE (parm))
3244 HOST_WIDE_INT size = int_size_in_bytes (TREE_TYPE (parm));
3245 int align = STACK_SLOT_ALIGNMENT (TREE_TYPE (parm),
3247 TYPE_ALIGN (TREE_TYPE (parm)));
3249 /* split_complex_arg put the real and imag parts in
3250 pseudos. Move them to memory. */
3251 tmp = assign_stack_local (DECL_MODE (parm), size, align);
3252 set_mem_attributes (tmp, parm, 1);
3253 rmem = adjust_address_nv (tmp, inner, 0);
3254 imem = adjust_address_nv (tmp, inner, GET_MODE_SIZE (inner));
3255 push_to_sequence2 (all->first_conversion_insn,
3256 all->last_conversion_insn);
3257 emit_move_insn (rmem, real);
3258 emit_move_insn (imem, imag);
3259 all->first_conversion_insn = get_insns ();
3260 all->last_conversion_insn = get_last_insn ();
3264 tmp = gen_rtx_CONCAT (DECL_MODE (parm), real, imag);
3265 SET_DECL_RTL (parm, tmp);
3267 real = DECL_INCOMING_RTL (VEC_index (tree, fnargs, i));
3268 imag = DECL_INCOMING_RTL (VEC_index (tree, fnargs, i + 1));
3269 if (inner != GET_MODE (real))
3271 real = gen_lowpart_SUBREG (inner, real);
3272 imag = gen_lowpart_SUBREG (inner, imag);
3274 tmp = gen_rtx_CONCAT (DECL_MODE (parm), real, imag);
3275 set_decl_incoming_rtl (parm, tmp, false);
3281 /* Assign RTL expressions to the function's parameters. This may involve
3282 copying them into registers and using those registers as the DECL_RTL. */
3285 assign_parms (tree fndecl)
3287 struct assign_parm_data_all all;
3289 VEC(tree, heap) *fnargs;
3292 crtl->args.internal_arg_pointer
3293 = targetm.calls.internal_arg_pointer ();
3295 assign_parms_initialize_all (&all);
3296 fnargs = assign_parms_augmented_arg_list (&all);
3298 for (i = 0; VEC_iterate (tree, fnargs, i, parm); ++i)
3300 struct assign_parm_data_one data;
3302 /* Extract the type of PARM; adjust it according to ABI. */
3303 assign_parm_find_data_types (&all, parm, &data);
3305 /* Early out for errors and void parameters. */
3306 if (data.passed_mode == VOIDmode)
3308 SET_DECL_RTL (parm, const0_rtx);
3309 DECL_INCOMING_RTL (parm) = DECL_RTL (parm);
3313 /* Estimate stack alignment from parameter alignment. */
3314 if (SUPPORTS_STACK_ALIGNMENT)
3316 unsigned int align = FUNCTION_ARG_BOUNDARY (data.promoted_mode,
3318 align = MINIMUM_ALIGNMENT (data.passed_type, data.promoted_mode,
3320 if (TYPE_ALIGN (data.nominal_type) > align)
3321 align = MINIMUM_ALIGNMENT (data.nominal_type,
3322 TYPE_MODE (data.nominal_type),
3323 TYPE_ALIGN (data.nominal_type));
3324 if (crtl->stack_alignment_estimated < align)
3326 gcc_assert (!crtl->stack_realign_processed);
3327 crtl->stack_alignment_estimated = align;
3331 if (cfun->stdarg && !DECL_CHAIN (parm))
3332 assign_parms_setup_varargs (&all, &data, false);
3334 /* Find out where the parameter arrives in this function. */
3335 assign_parm_find_entry_rtl (&all, &data);
3337 /* Find out where stack space for this parameter might be. */
3338 if (assign_parm_is_stack_parm (&all, &data))
3340 assign_parm_find_stack_rtl (parm, &data);
3341 assign_parm_adjust_entry_rtl (&data);
3344 /* Record permanently how this parm was passed. */
3345 set_decl_incoming_rtl (parm, data.entry_parm, data.passed_pointer);
3347 /* Update info on where next arg arrives in registers. */
3348 targetm.calls.function_arg_advance (&all.args_so_far, data.promoted_mode,
3349 data.passed_type, data.named_arg);
3351 assign_parm_adjust_stack_rtl (&data);
3353 if (assign_parm_setup_block_p (&data))
3354 assign_parm_setup_block (&all, parm, &data);
3355 else if (data.passed_pointer || use_register_for_decl (parm))
3356 assign_parm_setup_reg (&all, parm, &data);
3358 assign_parm_setup_stack (&all, parm, &data);
3361 if (targetm.calls.split_complex_arg)
3362 assign_parms_unsplit_complex (&all, fnargs);
3364 VEC_free (tree, heap, fnargs);
3366 /* Output all parameter conversion instructions (possibly including calls)
3367 now that all parameters have been copied out of hard registers. */
3368 emit_insn (all.first_conversion_insn);
3370 /* Estimate reload stack alignment from scalar return mode. */
3371 if (SUPPORTS_STACK_ALIGNMENT)
3373 if (DECL_RESULT (fndecl))
3375 tree type = TREE_TYPE (DECL_RESULT (fndecl));
3376 enum machine_mode mode = TYPE_MODE (type);
3380 && !AGGREGATE_TYPE_P (type))
3382 unsigned int align = GET_MODE_ALIGNMENT (mode);
3383 if (crtl->stack_alignment_estimated < align)
3385 gcc_assert (!crtl->stack_realign_processed);
3386 crtl->stack_alignment_estimated = align;
3392 /* If we are receiving a struct value address as the first argument, set up
3393 the RTL for the function result. As this might require code to convert
3394 the transmitted address to Pmode, we do this here to ensure that possible
3395 preliminary conversions of the address have been emitted already. */
3396 if (all.function_result_decl)
3398 tree result = DECL_RESULT (current_function_decl);
3399 rtx addr = DECL_RTL (all.function_result_decl);
3402 if (DECL_BY_REFERENCE (result))
3406 addr = convert_memory_address (Pmode, addr);
3407 x = gen_rtx_MEM (DECL_MODE (result), addr);
3408 set_mem_attributes (x, result, 1);
3410 SET_DECL_RTL (result, x);
3413 /* We have aligned all the args, so add space for the pretend args. */
3414 crtl->args.pretend_args_size = all.pretend_args_size;
3415 all.stack_args_size.constant += all.extra_pretend_bytes;
3416 crtl->args.size = all.stack_args_size.constant;
3418 /* Adjust function incoming argument size for alignment and
3421 #ifdef REG_PARM_STACK_SPACE
3422 crtl->args.size = MAX (crtl->args.size,
3423 REG_PARM_STACK_SPACE (fndecl));
3426 crtl->args.size = CEIL_ROUND (crtl->args.size,
3427 PARM_BOUNDARY / BITS_PER_UNIT);
3429 #ifdef ARGS_GROW_DOWNWARD
3430 crtl->args.arg_offset_rtx
3431 = (all.stack_args_size.var == 0 ? GEN_INT (-all.stack_args_size.constant)
3432 : expand_expr (size_diffop (all.stack_args_size.var,
3433 size_int (-all.stack_args_size.constant)),
3434 NULL_RTX, VOIDmode, EXPAND_NORMAL));
3436 crtl->args.arg_offset_rtx = ARGS_SIZE_RTX (all.stack_args_size);
3439 /* See how many bytes, if any, of its args a function should try to pop
3442 crtl->args.pops_args = targetm.calls.return_pops_args (fndecl,
3446 /* For stdarg.h function, save info about
3447 regs and stack space used by the named args. */
3449 crtl->args.info = all.args_so_far;
3451 /* Set the rtx used for the function return value. Put this in its
3452 own variable so any optimizers that need this information don't have
3453 to include tree.h. Do this here so it gets done when an inlined
3454 function gets output. */
3457 = (DECL_RTL_SET_P (DECL_RESULT (fndecl))
3458 ? DECL_RTL (DECL_RESULT (fndecl)) : NULL_RTX);
3460 /* If scalar return value was computed in a pseudo-reg, or was a named
3461 return value that got dumped to the stack, copy that to the hard
3463 if (DECL_RTL_SET_P (DECL_RESULT (fndecl)))
3465 tree decl_result = DECL_RESULT (fndecl);
3466 rtx decl_rtl = DECL_RTL (decl_result);
3468 if (REG_P (decl_rtl)
3469 ? REGNO (decl_rtl) >= FIRST_PSEUDO_REGISTER
3470 : DECL_REGISTER (decl_result))
3474 real_decl_rtl = targetm.calls.function_value (TREE_TYPE (decl_result),
3476 REG_FUNCTION_VALUE_P (real_decl_rtl) = 1;
3477 /* The delay slot scheduler assumes that crtl->return_rtx
3478 holds the hard register containing the return value, not a
3479 temporary pseudo. */
3480 crtl->return_rtx = real_decl_rtl;
3485 /* A subroutine of gimplify_parameters, invoked via walk_tree.
3486 For all seen types, gimplify their sizes. */
3489 gimplify_parm_type (tree *tp, int *walk_subtrees, void *data)
3496 if (POINTER_TYPE_P (t))
3498 else if (TYPE_SIZE (t) && !TREE_CONSTANT (TYPE_SIZE (t))
3499 && !TYPE_SIZES_GIMPLIFIED (t))
3501 gimplify_type_sizes (t, (gimple_seq *) data);
3509 /* Gimplify the parameter list for current_function_decl. This involves
3510 evaluating SAVE_EXPRs of variable sized parameters and generating code
3511 to implement callee-copies reference parameters. Returns a sequence of
3512 statements to add to the beginning of the function. */
3515 gimplify_parameters (void)
3517 struct assign_parm_data_all all;
3519 gimple_seq stmts = NULL;
3520 VEC(tree, heap) *fnargs;
3523 assign_parms_initialize_all (&all);
3524 fnargs = assign_parms_augmented_arg_list (&all);
3526 for (i = 0; VEC_iterate (tree, fnargs, i, parm); ++i)
3528 struct assign_parm_data_one data;
3530 /* Extract the type of PARM; adjust it according to ABI. */
3531 assign_parm_find_data_types (&all, parm, &data);
3533 /* Early out for errors and void parameters. */
3534 if (data.passed_mode == VOIDmode || DECL_SIZE (parm) == NULL)
3537 /* Update info on where next arg arrives in registers. */
3538 targetm.calls.function_arg_advance (&all.args_so_far, data.promoted_mode,
3539 data.passed_type, data.named_arg);
3541 /* ??? Once upon a time variable_size stuffed parameter list
3542 SAVE_EXPRs (amongst others) onto a pending sizes list. This
3543 turned out to be less than manageable in the gimple world.
3544 Now we have to hunt them down ourselves. */
3545 walk_tree_without_duplicates (&data.passed_type,
3546 gimplify_parm_type, &stmts);
3548 if (TREE_CODE (DECL_SIZE_UNIT (parm)) != INTEGER_CST)
3550 gimplify_one_sizepos (&DECL_SIZE (parm), &stmts);
3551 gimplify_one_sizepos (&DECL_SIZE_UNIT (parm), &stmts);
3554 if (data.passed_pointer)
3556 tree type = TREE_TYPE (data.passed_type);
3557 if (reference_callee_copied (&all.args_so_far, TYPE_MODE (type),
3558 type, data.named_arg))
3562 /* For constant-sized objects, this is trivial; for
3563 variable-sized objects, we have to play games. */
3564 if (TREE_CODE (DECL_SIZE_UNIT (parm)) == INTEGER_CST
3565 && !(flag_stack_check == GENERIC_STACK_CHECK
3566 && compare_tree_int (DECL_SIZE_UNIT (parm),
3567 STACK_CHECK_MAX_VAR_SIZE) > 0))
3569 local = create_tmp_var (type, get_name (parm));
3570 DECL_IGNORED_P (local) = 0;
3571 /* If PARM was addressable, move that flag over
3572 to the local copy, as its address will be taken,
3573 not the PARMs. Keep the parms address taken
3574 as we'll query that flag during gimplification. */
3575 if (TREE_ADDRESSABLE (parm))
3576 TREE_ADDRESSABLE (local) = 1;
3580 tree ptr_type, addr;
3582 ptr_type = build_pointer_type (type);
3583 addr = create_tmp_var (ptr_type, get_name (parm));
3584 DECL_IGNORED_P (addr) = 0;
3585 local = build_fold_indirect_ref (addr);
3587 t = built_in_decls[BUILT_IN_ALLOCA];
3588 t = build_call_expr (t, 1, DECL_SIZE_UNIT (parm));
3589 t = fold_convert (ptr_type, t);
3590 t = build2 (MODIFY_EXPR, TREE_TYPE (addr), addr, t);
3591 gimplify_and_add (t, &stmts);
3594 gimplify_assign (local, parm, &stmts);
3596 SET_DECL_VALUE_EXPR (parm, local);
3597 DECL_HAS_VALUE_EXPR_P (parm) = 1;
3602 VEC_free (tree, heap, fnargs);
3607 /* Compute the size and offset from the start of the stacked arguments for a
3608 parm passed in mode PASSED_MODE and with type TYPE.
3610 INITIAL_OFFSET_PTR points to the current offset into the stacked
3613 The starting offset and size for this parm are returned in
3614 LOCATE->OFFSET and LOCATE->SIZE, respectively. When IN_REGS is
3615 nonzero, the offset is that of stack slot, which is returned in
3616 LOCATE->SLOT_OFFSET. LOCATE->ALIGNMENT_PAD is the amount of
3617 padding required from the initial offset ptr to the stack slot.
3619 IN_REGS is nonzero if the argument will be passed in registers. It will
3620 never be set if REG_PARM_STACK_SPACE is not defined.
3622 FNDECL is the function in which the argument was defined.
3624 There are two types of rounding that are done. The first, controlled by
3625 FUNCTION_ARG_BOUNDARY, forces the offset from the start of the argument
3626 list to be aligned to the specific boundary (in bits). This rounding
3627 affects the initial and starting offsets, but not the argument size.
3629 The second, controlled by FUNCTION_ARG_PADDING and PARM_BOUNDARY,
3630 optionally rounds the size of the parm to PARM_BOUNDARY. The
3631 initial offset is not affected by this rounding, while the size always
3632 is and the starting offset may be. */
3634 /* LOCATE->OFFSET will be negative for ARGS_GROW_DOWNWARD case;
3635 INITIAL_OFFSET_PTR is positive because locate_and_pad_parm's
3636 callers pass in the total size of args so far as
3637 INITIAL_OFFSET_PTR. LOCATE->SIZE is always positive. */
3640 locate_and_pad_parm (enum machine_mode passed_mode, tree type, int in_regs,
3641 int partial, tree fndecl ATTRIBUTE_UNUSED,
3642 struct args_size *initial_offset_ptr,
3643 struct locate_and_pad_arg_data *locate)
3646 enum direction where_pad;
3647 unsigned int boundary;
3648 int reg_parm_stack_space = 0;
3649 int part_size_in_regs;
3651 #ifdef REG_PARM_STACK_SPACE
3652 reg_parm_stack_space = REG_PARM_STACK_SPACE (fndecl);
3654 /* If we have found a stack parm before we reach the end of the
3655 area reserved for registers, skip that area. */
3658 if (reg_parm_stack_space > 0)
3660 if (initial_offset_ptr->var)
3662 initial_offset_ptr->var
3663 = size_binop (MAX_EXPR, ARGS_SIZE_TREE (*initial_offset_ptr),
3664 ssize_int (reg_parm_stack_space));
3665 initial_offset_ptr->constant = 0;
3667 else if (initial_offset_ptr->constant < reg_parm_stack_space)
3668 initial_offset_ptr->constant = reg_parm_stack_space;
3671 #endif /* REG_PARM_STACK_SPACE */
3673 part_size_in_regs = (reg_parm_stack_space == 0 ? partial : 0);
3676 = type ? size_in_bytes (type) : size_int (GET_MODE_SIZE (passed_mode));
3677 where_pad = FUNCTION_ARG_PADDING (passed_mode, type);
3678 boundary = FUNCTION_ARG_BOUNDARY (passed_mode, type);
3679 locate->where_pad = where_pad;
3681 /* Alignment can't exceed MAX_SUPPORTED_STACK_ALIGNMENT. */
3682 if (boundary > MAX_SUPPORTED_STACK_ALIGNMENT)
3683 boundary = MAX_SUPPORTED_STACK_ALIGNMENT;
3685 locate->boundary = boundary;
3687 if (SUPPORTS_STACK_ALIGNMENT)
3689 /* stack_alignment_estimated can't change after stack has been
3691 if (crtl->stack_alignment_estimated < boundary)
3693 if (!crtl->stack_realign_processed)
3694 crtl->stack_alignment_estimated = boundary;
3697 /* If stack is realigned and stack alignment value
3698 hasn't been finalized, it is OK not to increase
3699 stack_alignment_estimated. The bigger alignment
3700 requirement is recorded in stack_alignment_needed
3702 gcc_assert (!crtl->stack_realign_finalized
3703 && crtl->stack_realign_needed);
3708 /* Remember if the outgoing parameter requires extra alignment on the
3709 calling function side. */
3710 if (crtl->stack_alignment_needed < boundary)
3711 crtl->stack_alignment_needed = boundary;
3712 if (crtl->preferred_stack_boundary < boundary)
3713 crtl->preferred_stack_boundary = boundary;
3715 #ifdef ARGS_GROW_DOWNWARD
3716 locate->slot_offset.constant = -initial_offset_ptr->constant;
3717 if (initial_offset_ptr->var)
3718 locate->slot_offset.var = size_binop (MINUS_EXPR, ssize_int (0),
3719 initial_offset_ptr->var);
3723 if (where_pad != none
3724 && (!host_integerp (sizetree, 1)
3725 || (tree_low_cst (sizetree, 1) * BITS_PER_UNIT) % PARM_BOUNDARY))
3726 s2 = round_up (s2, PARM_BOUNDARY / BITS_PER_UNIT);
3727 SUB_PARM_SIZE (locate->slot_offset, s2);
3730 locate->slot_offset.constant += part_size_in_regs;
3733 #ifdef REG_PARM_STACK_SPACE
3734 || REG_PARM_STACK_SPACE (fndecl) > 0
3737 pad_to_arg_alignment (&locate->slot_offset, boundary,
3738 &locate->alignment_pad);
3740 locate->size.constant = (-initial_offset_ptr->constant
3741 - locate->slot_offset.constant);
3742 if (initial_offset_ptr->var)
3743 locate->size.var = size_binop (MINUS_EXPR,
3744 size_binop (MINUS_EXPR,
3746 initial_offset_ptr->var),
3747 locate->slot_offset.var);
3749 /* Pad_below needs the pre-rounded size to know how much to pad
3751 locate->offset = locate->slot_offset;
3752 if (where_pad == downward)
3753 pad_below (&locate->offset, passed_mode, sizetree);
3755 #else /* !ARGS_GROW_DOWNWARD */
3757 #ifdef REG_PARM_STACK_SPACE
3758 || REG_PARM_STACK_SPACE (fndecl) > 0
3761 pad_to_arg_alignment (initial_offset_ptr, boundary,
3762 &locate->alignment_pad);
3763 locate->slot_offset = *initial_offset_ptr;
3765 #ifdef PUSH_ROUNDING
3766 if (passed_mode != BLKmode)
3767 sizetree = size_int (PUSH_ROUNDING (TREE_INT_CST_LOW (sizetree)));
3770 /* Pad_below needs the pre-rounded size to know how much to pad below
3771 so this must be done before rounding up. */
3772 locate->offset = locate->slot_offset;
3773 if (where_pad == downward)
3774 pad_below (&locate->offset, passed_mode, sizetree);
3776 if (where_pad != none
3777 && (!host_integerp (sizetree, 1)
3778 || (tree_low_cst (sizetree, 1) * BITS_PER_UNIT) % PARM_BOUNDARY))
3779 sizetree = round_up (sizetree, PARM_BOUNDARY / BITS_PER_UNIT);
3781 ADD_PARM_SIZE (locate->size, sizetree);
3783 locate->size.constant -= part_size_in_regs;
3784 #endif /* ARGS_GROW_DOWNWARD */
3786 #ifdef FUNCTION_ARG_OFFSET
3787 locate->offset.constant += FUNCTION_ARG_OFFSET (passed_mode, type);
3791 /* Round the stack offset in *OFFSET_PTR up to a multiple of BOUNDARY.
3792 BOUNDARY is measured in bits, but must be a multiple of a storage unit. */
3795 pad_to_arg_alignment (struct args_size *offset_ptr, int boundary,
3796 struct args_size *alignment_pad)
3798 tree save_var = NULL_TREE;
3799 HOST_WIDE_INT save_constant = 0;
3800 int boundary_in_bytes = boundary / BITS_PER_UNIT;
3801 HOST_WIDE_INT sp_offset = STACK_POINTER_OFFSET;
3803 #ifdef SPARC_STACK_BOUNDARY_HACK
3804 /* ??? The SPARC port may claim a STACK_BOUNDARY higher than
3805 the real alignment of %sp. However, when it does this, the
3806 alignment of %sp+STACK_POINTER_OFFSET is STACK_BOUNDARY. */
3807 if (SPARC_STACK_BOUNDARY_HACK)
3811 if (boundary > PARM_BOUNDARY)
3813 save_var = offset_ptr->var;
3814 save_constant = offset_ptr->constant;
3817 alignment_pad->var = NULL_TREE;
3818 alignment_pad->constant = 0;
3820 if (boundary > BITS_PER_UNIT)
3822 if (offset_ptr->var)
3824 tree sp_offset_tree = ssize_int (sp_offset);
3825 tree offset = size_binop (PLUS_EXPR,
3826 ARGS_SIZE_TREE (*offset_ptr),
3828 #ifdef ARGS_GROW_DOWNWARD
3829 tree rounded = round_down (offset, boundary / BITS_PER_UNIT);
3831 tree rounded = round_up (offset, boundary / BITS_PER_UNIT);
3834 offset_ptr->var = size_binop (MINUS_EXPR, rounded, sp_offset_tree);
3835 /* ARGS_SIZE_TREE includes constant term. */
3836 offset_ptr->constant = 0;
3837 if (boundary > PARM_BOUNDARY)
3838 alignment_pad->var = size_binop (MINUS_EXPR, offset_ptr->var,
3843 offset_ptr->constant = -sp_offset +
3844 #ifdef ARGS_GROW_DOWNWARD
3845 FLOOR_ROUND (offset_ptr->constant + sp_offset, boundary_in_bytes);
3847 CEIL_ROUND (offset_ptr->constant + sp_offset, boundary_in_bytes);
3849 if (boundary > PARM_BOUNDARY)
3850 alignment_pad->constant = offset_ptr->constant - save_constant;
3856 pad_below (struct args_size *offset_ptr, enum machine_mode passed_mode, tree sizetree)
3858 if (passed_mode != BLKmode)
3860 if (GET_MODE_BITSIZE (passed_mode) % PARM_BOUNDARY)
3861 offset_ptr->constant
3862 += (((GET_MODE_BITSIZE (passed_mode) + PARM_BOUNDARY - 1)
3863 / PARM_BOUNDARY * PARM_BOUNDARY / BITS_PER_UNIT)
3864 - GET_MODE_SIZE (passed_mode));
3868 if (TREE_CODE (sizetree) != INTEGER_CST
3869 || (TREE_INT_CST_LOW (sizetree) * BITS_PER_UNIT) % PARM_BOUNDARY)
3871 /* Round the size up to multiple of PARM_BOUNDARY bits. */
3872 tree s2 = round_up (sizetree, PARM_BOUNDARY / BITS_PER_UNIT);
3874 ADD_PARM_SIZE (*offset_ptr, s2);
3875 SUB_PARM_SIZE (*offset_ptr, sizetree);
3881 /* True if register REGNO was alive at a place where `setjmp' was
3882 called and was set more than once or is an argument. Such regs may
3883 be clobbered by `longjmp'. */
3886 regno_clobbered_at_setjmp (bitmap setjmp_crosses, int regno)
3888 /* There appear to be cases where some local vars never reach the
3889 backend but have bogus regnos. */
3890 if (regno >= max_reg_num ())
3893 return ((REG_N_SETS (regno) > 1
3894 || REGNO_REG_SET_P (df_get_live_out (ENTRY_BLOCK_PTR), regno))
3895 && REGNO_REG_SET_P (setjmp_crosses, regno));
3898 /* Walk the tree of blocks describing the binding levels within a
3899 function and warn about variables the might be killed by setjmp or
3900 vfork. This is done after calling flow_analysis before register
3901 allocation since that will clobber the pseudo-regs to hard
3905 setjmp_vars_warning (bitmap setjmp_crosses, tree block)
3909 for (decl = BLOCK_VARS (block); decl; decl = DECL_CHAIN (decl))
3911 if (TREE_CODE (decl) == VAR_DECL
3912 && DECL_RTL_SET_P (decl)
3913 && REG_P (DECL_RTL (decl))
3914 && regno_clobbered_at_setjmp (setjmp_crosses, REGNO (DECL_RTL (decl))))
3915 warning (OPT_Wclobbered, "variable %q+D might be clobbered by"
3916 " %<longjmp%> or %<vfork%>", decl);
3919 for (sub = BLOCK_SUBBLOCKS (block); sub; sub = BLOCK_CHAIN (sub))
3920 setjmp_vars_warning (setjmp_crosses, sub);
3923 /* Do the appropriate part of setjmp_vars_warning
3924 but for arguments instead of local variables. */
3927 setjmp_args_warning (bitmap setjmp_crosses)
3930 for (decl = DECL_ARGUMENTS (current_function_decl);
3931 decl; decl = DECL_CHAIN (decl))
3932 if (DECL_RTL (decl) != 0
3933 && REG_P (DECL_RTL (decl))
3934 && regno_clobbered_at_setjmp (setjmp_crosses, REGNO (DECL_RTL (decl))))
3935 warning (OPT_Wclobbered,
3936 "argument %q+D might be clobbered by %<longjmp%> or %<vfork%>",
3940 /* Generate warning messages for variables live across setjmp. */
3943 generate_setjmp_warnings (void)
3945 bitmap setjmp_crosses = regstat_get_setjmp_crosses ();
3947 if (n_basic_blocks == NUM_FIXED_BLOCKS
3948 || bitmap_empty_p (setjmp_crosses))
3951 setjmp_vars_warning (setjmp_crosses, DECL_INITIAL (current_function_decl));
3952 setjmp_args_warning (setjmp_crosses);
3956 /* Identify BLOCKs referenced by more than one NOTE_INSN_BLOCK_{BEG,END},
3957 and create duplicate blocks. */
3958 /* ??? Need an option to either create block fragments or to create
3959 abstract origin duplicates of a source block. It really depends
3960 on what optimization has been performed. */
3963 reorder_blocks (void)
3965 tree block = DECL_INITIAL (current_function_decl);
3966 VEC(tree,heap) *block_stack;
3968 if (block == NULL_TREE)
3971 block_stack = VEC_alloc (tree, heap, 10);
3973 /* Reset the TREE_ASM_WRITTEN bit for all blocks. */
3974 clear_block_marks (block);
3976 /* Prune the old trees away, so that they don't get in the way. */
3977 BLOCK_SUBBLOCKS (block) = NULL_TREE;
3978 BLOCK_CHAIN (block) = NULL_TREE;
3980 /* Recreate the block tree from the note nesting. */
3981 reorder_blocks_1 (get_insns (), block, &block_stack);
3982 BLOCK_SUBBLOCKS (block) = blocks_nreverse (BLOCK_SUBBLOCKS (block));
3984 VEC_free (tree, heap, block_stack);
3987 /* Helper function for reorder_blocks. Reset TREE_ASM_WRITTEN. */
3990 clear_block_marks (tree block)
3994 TREE_ASM_WRITTEN (block) = 0;
3995 clear_block_marks (BLOCK_SUBBLOCKS (block));
3996 block = BLOCK_CHAIN (block);
4001 reorder_blocks_1 (rtx insns, tree current_block, VEC(tree,heap) **p_block_stack)
4005 for (insn = insns; insn; insn = NEXT_INSN (insn))
4009 if (NOTE_KIND (insn) == NOTE_INSN_BLOCK_BEG)
4011 tree block = NOTE_BLOCK (insn);
4014 origin = (BLOCK_FRAGMENT_ORIGIN (block)
4015 ? BLOCK_FRAGMENT_ORIGIN (block)
4018 /* If we have seen this block before, that means it now
4019 spans multiple address regions. Create a new fragment. */
4020 if (TREE_ASM_WRITTEN (block))
4022 tree new_block = copy_node (block);
4024 BLOCK_FRAGMENT_ORIGIN (new_block) = origin;
4025 BLOCK_FRAGMENT_CHAIN (new_block)
4026 = BLOCK_FRAGMENT_CHAIN (origin);
4027 BLOCK_FRAGMENT_CHAIN (origin) = new_block;
4029 NOTE_BLOCK (insn) = new_block;
4033 BLOCK_SUBBLOCKS (block) = 0;
4034 TREE_ASM_WRITTEN (block) = 1;
4035 /* When there's only one block for the entire function,
4036 current_block == block and we mustn't do this, it
4037 will cause infinite recursion. */
4038 if (block != current_block)
4040 if (block != origin)
4041 gcc_assert (BLOCK_SUPERCONTEXT (origin) == current_block);
4043 BLOCK_SUPERCONTEXT (block) = current_block;
4044 BLOCK_CHAIN (block) = BLOCK_SUBBLOCKS (current_block);
4045 BLOCK_SUBBLOCKS (current_block) = block;
4046 current_block = origin;
4048 VEC_safe_push (tree, heap, *p_block_stack, block);
4050 else if (NOTE_KIND (insn) == NOTE_INSN_BLOCK_END)
4052 NOTE_BLOCK (insn) = VEC_pop (tree, *p_block_stack);
4053 BLOCK_SUBBLOCKS (current_block)
4054 = blocks_nreverse (BLOCK_SUBBLOCKS (current_block));
4055 current_block = BLOCK_SUPERCONTEXT (current_block);
4061 /* Reverse the order of elements in the chain T of blocks,
4062 and return the new head of the chain (old last element). */
4065 blocks_nreverse (tree t)
4067 tree prev = 0, decl, next;
4068 for (decl = t; decl; decl = next)
4070 next = BLOCK_CHAIN (decl);
4071 BLOCK_CHAIN (decl) = prev;
4077 /* Count the subblocks of the list starting with BLOCK. If VECTOR is
4078 non-NULL, list them all into VECTOR, in a depth-first preorder
4079 traversal of the block tree. Also clear TREE_ASM_WRITTEN in all
4083 all_blocks (tree block, tree *vector)
4089 TREE_ASM_WRITTEN (block) = 0;
4091 /* Record this block. */
4093 vector[n_blocks] = block;
4097 /* Record the subblocks, and their subblocks... */
4098 n_blocks += all_blocks (BLOCK_SUBBLOCKS (block),
4099 vector ? vector + n_blocks : 0);
4100 block = BLOCK_CHAIN (block);
4106 /* Return a vector containing all the blocks rooted at BLOCK. The
4107 number of elements in the vector is stored in N_BLOCKS_P. The
4108 vector is dynamically allocated; it is the caller's responsibility
4109 to call `free' on the pointer returned. */
4112 get_block_vector (tree block, int *n_blocks_p)
4116 *n_blocks_p = all_blocks (block, NULL);
4117 block_vector = XNEWVEC (tree, *n_blocks_p);
4118 all_blocks (block, block_vector);
4120 return block_vector;
4123 static GTY(()) int next_block_index = 2;
4125 /* Set BLOCK_NUMBER for all the blocks in FN. */
4128 number_blocks (tree fn)
4134 /* For SDB and XCOFF debugging output, we start numbering the blocks
4135 from 1 within each function, rather than keeping a running
4137 #if defined (SDB_DEBUGGING_INFO) || defined (XCOFF_DEBUGGING_INFO)
4138 if (write_symbols == SDB_DEBUG || write_symbols == XCOFF_DEBUG)
4139 next_block_index = 1;
4142 block_vector = get_block_vector (DECL_INITIAL (fn), &n_blocks);
4144 /* The top-level BLOCK isn't numbered at all. */
4145 for (i = 1; i < n_blocks; ++i)
4146 /* We number the blocks from two. */
4147 BLOCK_NUMBER (block_vector[i]) = next_block_index++;
4149 free (block_vector);
4154 /* If VAR is present in a subblock of BLOCK, return the subblock. */
4157 debug_find_var_in_block_tree (tree var, tree block)
4161 for (t = BLOCK_VARS (block); t; t = TREE_CHAIN (t))
4165 for (t = BLOCK_SUBBLOCKS (block); t; t = TREE_CHAIN (t))
4167 tree ret = debug_find_var_in_block_tree (var, t);
4175 /* Keep track of whether we're in a dummy function context. If we are,
4176 we don't want to invoke the set_current_function hook, because we'll
4177 get into trouble if the hook calls target_reinit () recursively or
4178 when the initial initialization is not yet complete. */
4180 static bool in_dummy_function;
4182 /* Invoke the target hook when setting cfun. Update the optimization options
4183 if the function uses different options than the default. */
4186 invoke_set_current_function_hook (tree fndecl)
4188 if (!in_dummy_function)
4190 tree opts = ((fndecl)
4191 ? DECL_FUNCTION_SPECIFIC_OPTIMIZATION (fndecl)
4192 : optimization_default_node);
4195 opts = optimization_default_node;
4197 /* Change optimization options if needed. */
4198 if (optimization_current_node != opts)
4200 optimization_current_node = opts;
4201 cl_optimization_restore (TREE_OPTIMIZATION (opts));
4204 targetm.set_current_function (fndecl);
4208 /* cfun should never be set directly; use this function. */
4211 set_cfun (struct function *new_cfun)
4213 if (cfun != new_cfun)
4216 invoke_set_current_function_hook (new_cfun ? new_cfun->decl : NULL_TREE);
4220 /* Initialized with NOGC, making this poisonous to the garbage collector. */
4222 static VEC(function_p,heap) *cfun_stack;
4224 /* Push the current cfun onto the stack, and set cfun to new_cfun. */
4227 push_cfun (struct function *new_cfun)
4229 VEC_safe_push (function_p, heap, cfun_stack, cfun);
4230 set_cfun (new_cfun);
4233 /* Pop cfun from the stack. */
4238 struct function *new_cfun = VEC_pop (function_p, cfun_stack);
4239 set_cfun (new_cfun);
4242 /* Return value of funcdef and increase it. */
4244 get_next_funcdef_no (void)
4246 return funcdef_no++;
4249 /* Allocate a function structure for FNDECL and set its contents
4250 to the defaults. Set cfun to the newly-allocated object.
4251 Some of the helper functions invoked during initialization assume
4252 that cfun has already been set. Therefore, assign the new object
4253 directly into cfun and invoke the back end hook explicitly at the
4254 very end, rather than initializing a temporary and calling set_cfun
4257 ABSTRACT_P is true if this is a function that will never be seen by
4258 the middle-end. Such functions are front-end concepts (like C++
4259 function templates) that do not correspond directly to functions
4260 placed in object files. */
4263 allocate_struct_function (tree fndecl, bool abstract_p)
4266 tree fntype = fndecl ? TREE_TYPE (fndecl) : NULL_TREE;
4268 cfun = ggc_alloc_cleared_function ();
4270 init_eh_for_function ();
4272 if (init_machine_status)
4273 cfun->machine = (*init_machine_status) ();
4275 #ifdef OVERRIDE_ABI_FORMAT
4276 OVERRIDE_ABI_FORMAT (fndecl);
4279 invoke_set_current_function_hook (fndecl);
4281 if (fndecl != NULL_TREE)
4283 DECL_STRUCT_FUNCTION (fndecl) = cfun;
4284 cfun->decl = fndecl;
4285 current_function_funcdef_no = get_next_funcdef_no ();
4287 result = DECL_RESULT (fndecl);
4288 if (!abstract_p && aggregate_value_p (result, fndecl))
4290 #ifdef PCC_STATIC_STRUCT_RETURN
4291 cfun->returns_pcc_struct = 1;
4293 cfun->returns_struct = 1;
4296 cfun->stdarg = stdarg_p (fntype);
4298 /* Assume all registers in stdarg functions need to be saved. */
4299 cfun->va_list_gpr_size = VA_LIST_MAX_GPR_SIZE;
4300 cfun->va_list_fpr_size = VA_LIST_MAX_FPR_SIZE;
4302 /* ??? This could be set on a per-function basis by the front-end
4303 but is this worth the hassle? */
4304 cfun->can_throw_non_call_exceptions = flag_non_call_exceptions;
4308 /* This is like allocate_struct_function, but pushes a new cfun for FNDECL
4309 instead of just setting it. */
4312 push_struct_function (tree fndecl)
4314 VEC_safe_push (function_p, heap, cfun_stack, cfun);
4315 allocate_struct_function (fndecl, false);
4318 /* Reset crtl and other non-struct-function variables to defaults as
4319 appropriate for emitting rtl at the start of a function. */
4322 prepare_function_start (void)
4324 gcc_assert (!crtl->emit.x_last_insn);
4327 init_varasm_status ();
4329 default_rtl_profile ();
4331 cse_not_expected = ! optimize;
4333 /* Caller save not needed yet. */
4334 caller_save_needed = 0;
4336 /* We haven't done register allocation yet. */
4339 /* Indicate that we have not instantiated virtual registers yet. */
4340 virtuals_instantiated = 0;
4342 /* Indicate that we want CONCATs now. */
4343 generating_concat_p = 1;
4345 /* Indicate we have no need of a frame pointer yet. */
4346 frame_pointer_needed = 0;
4349 /* Initialize the rtl expansion mechanism so that we can do simple things
4350 like generate sequences. This is used to provide a context during global
4351 initialization of some passes. You must call expand_dummy_function_end
4352 to exit this context. */
4355 init_dummy_function_start (void)
4357 gcc_assert (!in_dummy_function);
4358 in_dummy_function = true;
4359 push_struct_function (NULL_TREE);
4360 prepare_function_start ();
4363 /* Generate RTL for the start of the function SUBR (a FUNCTION_DECL tree node)
4364 and initialize static variables for generating RTL for the statements
4368 init_function_start (tree subr)
4370 if (subr && DECL_STRUCT_FUNCTION (subr))
4371 set_cfun (DECL_STRUCT_FUNCTION (subr));
4373 allocate_struct_function (subr, false);
4374 prepare_function_start ();
4376 /* Warn if this value is an aggregate type,
4377 regardless of which calling convention we are using for it. */
4378 if (AGGREGATE_TYPE_P (TREE_TYPE (DECL_RESULT (subr))))
4379 warning (OPT_Waggregate_return, "function returns an aggregate");
4382 /* Make sure all values used by the optimization passes have sane defaults. */
4384 init_function_for_compilation (void)
4390 struct rtl_opt_pass pass_init_function =
4394 "*init_function", /* name */
4396 init_function_for_compilation, /* execute */
4399 0, /* static_pass_number */
4400 TV_NONE, /* tv_id */
4401 0, /* properties_required */
4402 0, /* properties_provided */
4403 0, /* properties_destroyed */
4404 0, /* todo_flags_start */
4405 0 /* todo_flags_finish */
4411 expand_main_function (void)
4413 #if (defined(INVOKE__main) \
4414 || (!defined(HAS_INIT_SECTION) \
4415 && !defined(INIT_SECTION_ASM_OP) \
4416 && !defined(INIT_ARRAY_SECTION_ASM_OP)))
4417 emit_library_call (init_one_libfunc (NAME__MAIN), LCT_NORMAL, VOIDmode, 0);
4421 /* Expand code to initialize the stack_protect_guard. This is invoked at
4422 the beginning of a function to be protected. */
4424 #ifndef HAVE_stack_protect_set
4425 # define HAVE_stack_protect_set 0
4426 # define gen_stack_protect_set(x,y) (gcc_unreachable (), NULL_RTX)
4430 stack_protect_prologue (void)
4432 tree guard_decl = targetm.stack_protect_guard ();
4435 x = expand_normal (crtl->stack_protect_guard);
4436 y = expand_normal (guard_decl);
4438 /* Allow the target to copy from Y to X without leaking Y into a
4440 if (HAVE_stack_protect_set)
4442 rtx insn = gen_stack_protect_set (x, y);
4450 /* Otherwise do a straight move. */
4451 emit_move_insn (x, y);
4454 /* Expand code to verify the stack_protect_guard. This is invoked at
4455 the end of a function to be protected. */
4457 #ifndef HAVE_stack_protect_test
4458 # define HAVE_stack_protect_test 0
4459 # define gen_stack_protect_test(x, y, z) (gcc_unreachable (), NULL_RTX)
4463 stack_protect_epilogue (void)
4465 tree guard_decl = targetm.stack_protect_guard ();
4466 rtx label = gen_label_rtx ();
4469 x = expand_normal (crtl->stack_protect_guard);
4470 y = expand_normal (guard_decl);
4472 /* Allow the target to compare Y with X without leaking either into
4474 switch (HAVE_stack_protect_test != 0)
4477 tmp = gen_stack_protect_test (x, y, label);
4486 emit_cmp_and_jump_insns (x, y, EQ, NULL_RTX, ptr_mode, 1, label);
4490 /* The noreturn predictor has been moved to the tree level. The rtl-level
4491 predictors estimate this branch about 20%, which isn't enough to get
4492 things moved out of line. Since this is the only extant case of adding
4493 a noreturn function at the rtl level, it doesn't seem worth doing ought
4494 except adding the prediction by hand. */
4495 tmp = get_last_insn ();
4497 predict_insn_def (tmp, PRED_NORETURN, TAKEN);
4499 expand_expr_stmt (targetm.stack_protect_fail ());
4503 /* Start the RTL for a new function, and set variables used for
4505 SUBR is the FUNCTION_DECL node.
4506 PARMS_HAVE_CLEANUPS is nonzero if there are cleanups associated with
4507 the function's parameters, which must be run at any return statement. */
4510 expand_function_start (tree subr)
4512 /* Make sure volatile mem refs aren't considered
4513 valid operands of arithmetic insns. */
4514 init_recog_no_volatile ();
4518 && ! DECL_NO_INSTRUMENT_FUNCTION_ENTRY_EXIT (subr));
4521 = (stack_limit_rtx != NULL_RTX && ! DECL_NO_LIMIT_STACK (subr));
4523 /* Make the label for return statements to jump to. Do not special
4524 case machines with special return instructions -- they will be
4525 handled later during jump, ifcvt, or epilogue creation. */
4526 return_label = gen_label_rtx ();
4528 /* Initialize rtx used to return the value. */
4529 /* Do this before assign_parms so that we copy the struct value address
4530 before any library calls that assign parms might generate. */
4532 /* Decide whether to return the value in memory or in a register. */
4533 if (aggregate_value_p (DECL_RESULT (subr), subr))
4535 /* Returning something that won't go in a register. */
4536 rtx value_address = 0;
4538 #ifdef PCC_STATIC_STRUCT_RETURN
4539 if (cfun->returns_pcc_struct)
4541 int size = int_size_in_bytes (TREE_TYPE (DECL_RESULT (subr)));
4542 value_address = assemble_static_space (size);
4547 rtx sv = targetm.calls.struct_value_rtx (TREE_TYPE (subr), 2);
4548 /* Expect to be passed the address of a place to store the value.
4549 If it is passed as an argument, assign_parms will take care of
4553 value_address = gen_reg_rtx (Pmode);
4554 emit_move_insn (value_address, sv);
4559 rtx x = value_address;
4560 if (!DECL_BY_REFERENCE (DECL_RESULT (subr)))
4562 x = gen_rtx_MEM (DECL_MODE (DECL_RESULT (subr)), x);
4563 set_mem_attributes (x, DECL_RESULT (subr), 1);
4565 SET_DECL_RTL (DECL_RESULT (subr), x);
4568 else if (DECL_MODE (DECL_RESULT (subr)) == VOIDmode)
4569 /* If return mode is void, this decl rtl should not be used. */
4570 SET_DECL_RTL (DECL_RESULT (subr), NULL_RTX);
4573 /* Compute the return values into a pseudo reg, which we will copy
4574 into the true return register after the cleanups are done. */
4575 tree return_type = TREE_TYPE (DECL_RESULT (subr));
4576 if (TYPE_MODE (return_type) != BLKmode
4577 && targetm.calls.return_in_msb (return_type))
4578 /* expand_function_end will insert the appropriate padding in
4579 this case. Use the return value's natural (unpadded) mode
4580 within the function proper. */
4581 SET_DECL_RTL (DECL_RESULT (subr),
4582 gen_reg_rtx (TYPE_MODE (return_type)));
4585 /* In order to figure out what mode to use for the pseudo, we
4586 figure out what the mode of the eventual return register will
4587 actually be, and use that. */
4588 rtx hard_reg = hard_function_value (return_type, subr, 0, 1);
4590 /* Structures that are returned in registers are not
4591 aggregate_value_p, so we may see a PARALLEL or a REG. */
4592 if (REG_P (hard_reg))
4593 SET_DECL_RTL (DECL_RESULT (subr),
4594 gen_reg_rtx (GET_MODE (hard_reg)));
4597 gcc_assert (GET_CODE (hard_reg) == PARALLEL);
4598 SET_DECL_RTL (DECL_RESULT (subr), gen_group_rtx (hard_reg));
4602 /* Set DECL_REGISTER flag so that expand_function_end will copy the
4603 result to the real return register(s). */
4604 DECL_REGISTER (DECL_RESULT (subr)) = 1;
4607 /* Initialize rtx for parameters and local variables.
4608 In some cases this requires emitting insns. */
4609 assign_parms (subr);
4611 /* If function gets a static chain arg, store it. */
4612 if (cfun->static_chain_decl)
4614 tree parm = cfun->static_chain_decl;
4615 rtx local, chain, insn;
4617 local = gen_reg_rtx (Pmode);
4618 chain = targetm.calls.static_chain (current_function_decl, true);
4620 set_decl_incoming_rtl (parm, chain, false);
4621 SET_DECL_RTL (parm, local);
4622 mark_reg_pointer (local, TYPE_ALIGN (TREE_TYPE (TREE_TYPE (parm))));
4624 insn = emit_move_insn (local, chain);
4626 /* Mark the register as eliminable, similar to parameters. */
4628 && reg_mentioned_p (arg_pointer_rtx, XEXP (chain, 0)))
4629 set_unique_reg_note (insn, REG_EQUIV, chain);
4632 /* If the function receives a non-local goto, then store the
4633 bits we need to restore the frame pointer. */
4634 if (cfun->nonlocal_goto_save_area)
4639 /* ??? We need to do this save early. Unfortunately here is
4640 before the frame variable gets declared. Help out... */
4641 tree var = TREE_OPERAND (cfun->nonlocal_goto_save_area, 0);
4642 if (!DECL_RTL_SET_P (var))
4645 t_save = build4 (ARRAY_REF, ptr_type_node,
4646 cfun->nonlocal_goto_save_area,
4647 integer_zero_node, NULL_TREE, NULL_TREE);
4648 r_save = expand_expr (t_save, NULL_RTX, VOIDmode, EXPAND_WRITE);
4649 r_save = convert_memory_address (Pmode, r_save);
4651 emit_move_insn (r_save, targetm.builtin_setjmp_frame_value ());
4652 update_nonlocal_goto_save_area ();
4655 /* The following was moved from init_function_start.
4656 The move is supposed to make sdb output more accurate. */
4657 /* Indicate the beginning of the function body,
4658 as opposed to parm setup. */
4659 emit_note (NOTE_INSN_FUNCTION_BEG);
4661 gcc_assert (NOTE_P (get_last_insn ()));
4663 parm_birth_insn = get_last_insn ();
4668 PROFILE_HOOK (current_function_funcdef_no);
4672 /* After the display initializations is where the stack checking
4674 if(flag_stack_check)
4675 stack_check_probe_note = emit_note (NOTE_INSN_DELETED);
4677 /* Make sure there is a line number after the function entry setup code. */
4678 force_next_line_note ();
4681 /* Undo the effects of init_dummy_function_start. */
4683 expand_dummy_function_end (void)
4685 gcc_assert (in_dummy_function);
4687 /* End any sequences that failed to be closed due to syntax errors. */
4688 while (in_sequence_p ())
4691 /* Outside function body, can't compute type's actual size
4692 until next function's body starts. */
4694 free_after_parsing (cfun);
4695 free_after_compilation (cfun);
4697 in_dummy_function = false;
4700 /* Call DOIT for each hard register used as a return value from
4701 the current function. */
4704 diddle_return_value (void (*doit) (rtx, void *), void *arg)
4706 rtx outgoing = crtl->return_rtx;
4711 if (REG_P (outgoing))
4712 (*doit) (outgoing, arg);
4713 else if (GET_CODE (outgoing) == PARALLEL)
4717 for (i = 0; i < XVECLEN (outgoing, 0); i++)
4719 rtx x = XEXP (XVECEXP (outgoing, 0, i), 0);
4721 if (REG_P (x) && REGNO (x) < FIRST_PSEUDO_REGISTER)
4728 do_clobber_return_reg (rtx reg, void *arg ATTRIBUTE_UNUSED)
4734 clobber_return_register (void)
4736 diddle_return_value (do_clobber_return_reg, NULL);
4738 /* In case we do use pseudo to return value, clobber it too. */
4739 if (DECL_RTL_SET_P (DECL_RESULT (current_function_decl)))
4741 tree decl_result = DECL_RESULT (current_function_decl);
4742 rtx decl_rtl = DECL_RTL (decl_result);
4743 if (REG_P (decl_rtl) && REGNO (decl_rtl) >= FIRST_PSEUDO_REGISTER)
4745 do_clobber_return_reg (decl_rtl, NULL);
4751 do_use_return_reg (rtx reg, void *arg ATTRIBUTE_UNUSED)
4757 use_return_register (void)
4759 diddle_return_value (do_use_return_reg, NULL);
4762 /* Possibly warn about unused parameters. */
4764 do_warn_unused_parameter (tree fn)
4768 for (decl = DECL_ARGUMENTS (fn);
4769 decl; decl = DECL_CHAIN (decl))
4770 if (!TREE_USED (decl) && TREE_CODE (decl) == PARM_DECL
4771 && DECL_NAME (decl) && !DECL_ARTIFICIAL (decl)
4772 && !TREE_NO_WARNING (decl))
4773 warning (OPT_Wunused_parameter, "unused parameter %q+D", decl);
4776 static GTY(()) rtx initial_trampoline;
4778 /* Generate RTL for the end of the current function. */
4781 expand_function_end (void)
4785 /* If arg_pointer_save_area was referenced only from a nested
4786 function, we will not have initialized it yet. Do that now. */
4787 if (arg_pointer_save_area && ! crtl->arg_pointer_save_area_init)
4788 get_arg_pointer_save_area ();
4790 /* If we are doing generic stack checking and this function makes calls,
4791 do a stack probe at the start of the function to ensure we have enough
4792 space for another stack frame. */
4793 if (flag_stack_check == GENERIC_STACK_CHECK)
4797 for (insn = get_insns (); insn; insn = NEXT_INSN (insn))
4800 rtx max_frame_size = GEN_INT (STACK_CHECK_MAX_FRAME_SIZE);
4802 if (STACK_CHECK_MOVING_SP)
4803 anti_adjust_stack_and_probe (max_frame_size, true);
4805 probe_stack_range (STACK_OLD_CHECK_PROTECT, max_frame_size);
4808 emit_insn_before (seq, stack_check_probe_note);
4813 /* End any sequences that failed to be closed due to syntax errors. */
4814 while (in_sequence_p ())
4817 clear_pending_stack_adjust ();
4818 do_pending_stack_adjust ();
4820 /* Output a linenumber for the end of the function.
4821 SDB depends on this. */
4822 force_next_line_note ();
4823 set_curr_insn_source_location (input_location);
4825 /* Before the return label (if any), clobber the return
4826 registers so that they are not propagated live to the rest of
4827 the function. This can only happen with functions that drop
4828 through; if there had been a return statement, there would
4829 have either been a return rtx, or a jump to the return label.
4831 We delay actual code generation after the current_function_value_rtx
4833 clobber_after = get_last_insn ();
4835 /* Output the label for the actual return from the function. */
4836 emit_label (return_label);
4838 if (USING_SJLJ_EXCEPTIONS)
4840 /* Let except.c know where it should emit the call to unregister
4841 the function context for sjlj exceptions. */
4842 if (flag_exceptions)
4843 sjlj_emit_function_exit_after (get_last_insn ());
4847 /* We want to ensure that instructions that may trap are not
4848 moved into the epilogue by scheduling, because we don't
4849 always emit unwind information for the epilogue. */
4850 if (cfun->can_throw_non_call_exceptions)
4851 emit_insn (gen_blockage ());
4854 /* If this is an implementation of throw, do what's necessary to
4855 communicate between __builtin_eh_return and the epilogue. */
4856 expand_eh_return ();
4858 /* If scalar return value was computed in a pseudo-reg, or was a named
4859 return value that got dumped to the stack, copy that to the hard
4861 if (DECL_RTL_SET_P (DECL_RESULT (current_function_decl)))
4863 tree decl_result = DECL_RESULT (current_function_decl);
4864 rtx decl_rtl = DECL_RTL (decl_result);
4866 if (REG_P (decl_rtl)
4867 ? REGNO (decl_rtl) >= FIRST_PSEUDO_REGISTER
4868 : DECL_REGISTER (decl_result))
4870 rtx real_decl_rtl = crtl->return_rtx;
4872 /* This should be set in assign_parms. */
4873 gcc_assert (REG_FUNCTION_VALUE_P (real_decl_rtl));
4875 /* If this is a BLKmode structure being returned in registers,
4876 then use the mode computed in expand_return. Note that if
4877 decl_rtl is memory, then its mode may have been changed,
4878 but that crtl->return_rtx has not. */
4879 if (GET_MODE (real_decl_rtl) == BLKmode)
4880 PUT_MODE (real_decl_rtl, GET_MODE (decl_rtl));
4882 /* If a non-BLKmode return value should be padded at the least
4883 significant end of the register, shift it left by the appropriate
4884 amount. BLKmode results are handled using the group load/store
4886 if (TYPE_MODE (TREE_TYPE (decl_result)) != BLKmode
4887 && targetm.calls.return_in_msb (TREE_TYPE (decl_result)))
4889 emit_move_insn (gen_rtx_REG (GET_MODE (decl_rtl),
4890 REGNO (real_decl_rtl)),
4892 shift_return_value (GET_MODE (decl_rtl), true, real_decl_rtl);
4894 /* If a named return value dumped decl_return to memory, then
4895 we may need to re-do the PROMOTE_MODE signed/unsigned
4897 else if (GET_MODE (real_decl_rtl) != GET_MODE (decl_rtl))
4899 int unsignedp = TYPE_UNSIGNED (TREE_TYPE (decl_result));
4900 promote_function_mode (TREE_TYPE (decl_result),
4901 GET_MODE (decl_rtl), &unsignedp,
4902 TREE_TYPE (current_function_decl), 1);
4904 convert_move (real_decl_rtl, decl_rtl, unsignedp);
4906 else if (GET_CODE (real_decl_rtl) == PARALLEL)
4908 /* If expand_function_start has created a PARALLEL for decl_rtl,
4909 move the result to the real return registers. Otherwise, do
4910 a group load from decl_rtl for a named return. */
4911 if (GET_CODE (decl_rtl) == PARALLEL)
4912 emit_group_move (real_decl_rtl, decl_rtl);
4914 emit_group_load (real_decl_rtl, decl_rtl,
4915 TREE_TYPE (decl_result),
4916 int_size_in_bytes (TREE_TYPE (decl_result)));
4918 /* In the case of complex integer modes smaller than a word, we'll
4919 need to generate some non-trivial bitfield insertions. Do that
4920 on a pseudo and not the hard register. */
4921 else if (GET_CODE (decl_rtl) == CONCAT
4922 && GET_MODE_CLASS (GET_MODE (decl_rtl)) == MODE_COMPLEX_INT
4923 && GET_MODE_BITSIZE (GET_MODE (decl_rtl)) <= BITS_PER_WORD)
4925 int old_generating_concat_p;
4928 old_generating_concat_p = generating_concat_p;
4929 generating_concat_p = 0;
4930 tmp = gen_reg_rtx (GET_MODE (decl_rtl));
4931 generating_concat_p = old_generating_concat_p;
4933 emit_move_insn (tmp, decl_rtl);
4934 emit_move_insn (real_decl_rtl, tmp);
4937 emit_move_insn (real_decl_rtl, decl_rtl);
4941 /* If returning a structure, arrange to return the address of the value
4942 in a place where debuggers expect to find it.
4944 If returning a structure PCC style,
4945 the caller also depends on this value.
4946 And cfun->returns_pcc_struct is not necessarily set. */
4947 if (cfun->returns_struct
4948 || cfun->returns_pcc_struct)
4950 rtx value_address = DECL_RTL (DECL_RESULT (current_function_decl));
4951 tree type = TREE_TYPE (DECL_RESULT (current_function_decl));
4954 if (DECL_BY_REFERENCE (DECL_RESULT (current_function_decl)))
4955 type = TREE_TYPE (type);
4957 value_address = XEXP (value_address, 0);
4959 outgoing = targetm.calls.function_value (build_pointer_type (type),
4960 current_function_decl, true);
4962 /* Mark this as a function return value so integrate will delete the
4963 assignment and USE below when inlining this function. */
4964 REG_FUNCTION_VALUE_P (outgoing) = 1;
4966 /* The address may be ptr_mode and OUTGOING may be Pmode. */
4967 value_address = convert_memory_address (GET_MODE (outgoing),
4970 emit_move_insn (outgoing, value_address);
4972 /* Show return register used to hold result (in this case the address
4974 crtl->return_rtx = outgoing;
4977 /* Emit the actual code to clobber return register. */
4982 clobber_return_register ();
4986 emit_insn_after (seq, clobber_after);
4989 /* Output the label for the naked return from the function. */
4990 if (naked_return_label)
4991 emit_label (naked_return_label);
4993 /* @@@ This is a kludge. We want to ensure that instructions that
4994 may trap are not moved into the epilogue by scheduling, because
4995 we don't always emit unwind information for the epilogue. */
4996 if (!USING_SJLJ_EXCEPTIONS && cfun->can_throw_non_call_exceptions)
4997 emit_insn (gen_blockage ());
4999 /* If stack protection is enabled for this function, check the guard. */
5000 if (crtl->stack_protect_guard)
5001 stack_protect_epilogue ();
5003 /* If we had calls to alloca, and this machine needs
5004 an accurate stack pointer to exit the function,
5005 insert some code to save and restore the stack pointer. */
5006 if (! EXIT_IGNORE_STACK
5007 && cfun->calls_alloca)
5011 emit_stack_save (SAVE_FUNCTION, &tem, parm_birth_insn);
5012 emit_stack_restore (SAVE_FUNCTION, tem, NULL_RTX);
5015 /* ??? This should no longer be necessary since stupid is no longer with
5016 us, but there are some parts of the compiler (eg reload_combine, and
5017 sh mach_dep_reorg) that still try and compute their own lifetime info
5018 instead of using the general framework. */
5019 use_return_register ();
5023 get_arg_pointer_save_area (void)
5025 rtx ret = arg_pointer_save_area;
5029 ret = assign_stack_local (Pmode, GET_MODE_SIZE (Pmode), 0);
5030 arg_pointer_save_area = ret;
5033 if (! crtl->arg_pointer_save_area_init)
5037 /* Save the arg pointer at the beginning of the function. The
5038 generated stack slot may not be a valid memory address, so we
5039 have to check it and fix it if necessary. */
5041 emit_move_insn (validize_mem (ret),
5042 crtl->args.internal_arg_pointer);
5046 push_topmost_sequence ();
5047 emit_insn_after (seq, entry_of_function ());
5048 pop_topmost_sequence ();
5054 /* Add a list of INSNS to the hash HASHP, possibly allocating HASHP
5055 for the first time. */
5058 record_insns (rtx insns, rtx end, htab_t *hashp)
5061 htab_t hash = *hashp;
5065 = htab_create_ggc (17, htab_hash_pointer, htab_eq_pointer, NULL);
5067 for (tmp = insns; tmp != end; tmp = NEXT_INSN (tmp))
5069 void **slot = htab_find_slot (hash, tmp, INSERT);
5070 gcc_assert (*slot == NULL);
5075 /* INSN has been duplicated as COPY, as part of duping a basic block.
5076 If INSN is an epilogue insn, then record COPY as epilogue as well. */
5079 maybe_copy_epilogue_insn (rtx insn, rtx copy)
5083 if (epilogue_insn_hash == NULL
5084 || htab_find (epilogue_insn_hash, insn) == NULL)
5087 slot = htab_find_slot (epilogue_insn_hash, copy, INSERT);
5088 gcc_assert (*slot == NULL);
5092 /* Set the locator of the insn chain starting at INSN to LOC. */
5094 set_insn_locators (rtx insn, int loc)
5096 while (insn != NULL_RTX)
5099 INSN_LOCATOR (insn) = loc;
5100 insn = NEXT_INSN (insn);
5104 /* Determine if any INSNs in HASH are, or are part of, INSN. Because
5105 we can be running after reorg, SEQUENCE rtl is possible. */
5108 contains (const_rtx insn, htab_t hash)
5113 if (NONJUMP_INSN_P (insn) && GET_CODE (PATTERN (insn)) == SEQUENCE)
5116 for (i = XVECLEN (PATTERN (insn), 0) - 1; i >= 0; i--)
5117 if (htab_find (hash, XVECEXP (PATTERN (insn), 0, i)))
5122 return htab_find (hash, insn) != NULL;
5126 prologue_epilogue_contains (const_rtx insn)
5128 if (contains (insn, prologue_insn_hash))
5130 if (contains (insn, epilogue_insn_hash))
5136 /* Insert gen_return at the end of block BB. This also means updating
5137 block_for_insn appropriately. */
5140 emit_return_into_block (basic_block bb)
5142 emit_jump_insn_after (gen_return (), BB_END (bb));
5144 #endif /* HAVE_return */
5146 /* Generate the prologue and epilogue RTL if the machine supports it. Thread
5147 this into place with notes indicating where the prologue ends and where
5148 the epilogue begins. Update the basic block information when possible. */
5151 thread_prologue_and_epilogue_insns (void)
5155 #if defined (HAVE_sibcall_epilogue) || defined (HAVE_epilogue) || defined (HAVE_return) || defined (HAVE_prologue)
5158 #if defined (HAVE_epilogue) || defined(HAVE_return)
5159 rtx epilogue_end = NULL_RTX;
5163 rtl_profile_for_bb (ENTRY_BLOCK_PTR);
5164 #ifdef HAVE_prologue
5168 seq = gen_prologue ();
5171 /* Insert an explicit USE for the frame pointer
5172 if the profiling is on and the frame pointer is required. */
5173 if (crtl->profile && frame_pointer_needed)
5174 emit_use (hard_frame_pointer_rtx);
5176 /* Retain a map of the prologue insns. */
5177 record_insns (seq, NULL, &prologue_insn_hash);
5178 emit_note (NOTE_INSN_PROLOGUE_END);
5180 /* Ensure that instructions are not moved into the prologue when
5181 profiling is on. The call to the profiling routine can be
5182 emitted within the live range of a call-clobbered register. */
5183 if (!targetm.profile_before_prologue () && crtl->profile)
5184 emit_insn (gen_blockage ());
5188 set_insn_locators (seq, prologue_locator);
5190 /* Can't deal with multiple successors of the entry block
5191 at the moment. Function should always have at least one
5193 gcc_assert (single_succ_p (ENTRY_BLOCK_PTR));
5195 insert_insn_on_edge (seq, single_succ_edge (ENTRY_BLOCK_PTR));
5200 /* If the exit block has no non-fake predecessors, we don't need
5202 FOR_EACH_EDGE (e, ei, EXIT_BLOCK_PTR->preds)
5203 if ((e->flags & EDGE_FAKE) == 0)
5208 rtl_profile_for_bb (EXIT_BLOCK_PTR);
5210 if (optimize && HAVE_return)
5212 /* If we're allowed to generate a simple return instruction,
5213 then by definition we don't need a full epilogue. Examine
5214 the block that falls through to EXIT. If it does not
5215 contain any code, examine its predecessors and try to
5216 emit (conditional) return instructions. */
5221 FOR_EACH_EDGE (e, ei, EXIT_BLOCK_PTR->preds)
5222 if (e->flags & EDGE_FALLTHRU)
5228 /* Verify that there are no active instructions in the last block. */
5229 label = BB_END (last);
5230 while (label && !LABEL_P (label))
5232 if (active_insn_p (label))
5234 label = PREV_INSN (label);
5237 if (BB_HEAD (last) == label && LABEL_P (label))
5241 for (ei2 = ei_start (last->preds); (e = ei_safe_edge (ei2)); )
5243 basic_block bb = e->src;
5246 if (bb == ENTRY_BLOCK_PTR)
5253 if (!JUMP_P (jump) || JUMP_LABEL (jump) != label)
5259 /* If we have an unconditional jump, we can replace that
5260 with a simple return instruction. */
5261 if (simplejump_p (jump))
5263 emit_return_into_block (bb);
5267 /* If we have a conditional jump, we can try to replace
5268 that with a conditional return instruction. */
5269 else if (condjump_p (jump))
5271 if (! redirect_jump (jump, 0, 0))
5277 /* If this block has only one successor, it both jumps
5278 and falls through to the fallthru block, so we can't
5280 if (single_succ_p (bb))
5292 /* Fix up the CFG for the successful change we just made. */
5293 redirect_edge_succ (e, EXIT_BLOCK_PTR);
5296 /* Emit a return insn for the exit fallthru block. Whether
5297 this is still reachable will be determined later. */
5299 emit_barrier_after (BB_END (last));
5300 emit_return_into_block (last);
5301 epilogue_end = BB_END (last);
5302 single_succ_edge (last)->flags &= ~EDGE_FALLTHRU;
5308 /* A small fib -- epilogue is not yet completed, but we wish to re-use
5309 this marker for the splits of EH_RETURN patterns, and nothing else
5310 uses the flag in the meantime. */
5311 epilogue_completed = 1;
5313 #ifdef HAVE_eh_return
5314 /* Find non-fallthru edges that end with EH_RETURN instructions. On
5315 some targets, these get split to a special version of the epilogue
5316 code. In order to be able to properly annotate these with unwind
5317 info, try to split them now. If we get a valid split, drop an
5318 EPILOGUE_BEG note and mark the insns as epilogue insns. */
5319 FOR_EACH_EDGE (e, ei, EXIT_BLOCK_PTR->preds)
5321 rtx prev, last, trial;
5323 if (e->flags & EDGE_FALLTHRU)
5325 last = BB_END (e->src);
5326 if (!eh_returnjump_p (last))
5329 prev = PREV_INSN (last);
5330 trial = try_split (PATTERN (last), last, 1);
5334 record_insns (NEXT_INSN (prev), NEXT_INSN (trial), &epilogue_insn_hash);
5335 emit_note_after (NOTE_INSN_EPILOGUE_BEG, prev);
5339 /* Find the edge that falls through to EXIT. Other edges may exist
5340 due to RETURN instructions, but those don't need epilogues.
5341 There really shouldn't be a mixture -- either all should have
5342 been converted or none, however... */
5344 FOR_EACH_EDGE (e, ei, EXIT_BLOCK_PTR->preds)
5345 if (e->flags & EDGE_FALLTHRU)
5350 #ifdef HAVE_epilogue
5354 epilogue_end = emit_note (NOTE_INSN_EPILOGUE_BEG);
5355 seq = gen_epilogue ();
5356 emit_jump_insn (seq);
5358 /* Retain a map of the epilogue insns. */
5359 record_insns (seq, NULL, &epilogue_insn_hash);
5360 set_insn_locators (seq, epilogue_locator);
5365 insert_insn_on_edge (seq, e);
5373 if (! next_active_insn (BB_END (e->src)))
5375 /* We have a fall-through edge to the exit block, the source is not
5376 at the end of the function, and there will be an assembler epilogue
5377 at the end of the function.
5378 We can't use force_nonfallthru here, because that would try to
5379 use return. Inserting a jump 'by hand' is extremely messy, so
5380 we take advantage of cfg_layout_finalize using
5381 fixup_fallthru_exit_predecessor. */
5382 cfg_layout_initialize (0);
5383 FOR_EACH_BB (cur_bb)
5384 if (cur_bb->index >= NUM_FIXED_BLOCKS
5385 && cur_bb->next_bb->index >= NUM_FIXED_BLOCKS)
5386 cur_bb->aux = cur_bb->next_bb;
5387 cfg_layout_finalize ();
5390 default_rtl_profile ();
5394 commit_edge_insertions ();
5396 /* The epilogue insns we inserted may cause the exit edge to no longer
5398 FOR_EACH_EDGE (e, ei, EXIT_BLOCK_PTR->preds)
5400 if (((e->flags & EDGE_FALLTHRU) != 0)
5401 && returnjump_p (BB_END (e->src)))
5402 e->flags &= ~EDGE_FALLTHRU;
5406 #ifdef HAVE_sibcall_epilogue
5407 /* Emit sibling epilogues before any sibling call sites. */
5408 for (ei = ei_start (EXIT_BLOCK_PTR->preds); (e = ei_safe_edge (ei)); )
5410 basic_block bb = e->src;
5411 rtx insn = BB_END (bb);
5414 || ! SIBLING_CALL_P (insn))
5421 emit_note (NOTE_INSN_EPILOGUE_BEG);
5422 emit_insn (gen_sibcall_epilogue ());
5426 /* Retain a map of the epilogue insns. Used in life analysis to
5427 avoid getting rid of sibcall epilogue insns. Do this before we
5428 actually emit the sequence. */
5429 record_insns (seq, NULL, &epilogue_insn_hash);
5430 set_insn_locators (seq, epilogue_locator);
5432 emit_insn_before (seq, insn);
5437 #ifdef HAVE_epilogue
5442 /* Similarly, move any line notes that appear after the epilogue.
5443 There is no need, however, to be quite so anal about the existence
5444 of such a note. Also possibly move
5445 NOTE_INSN_FUNCTION_BEG notes, as those can be relevant for debug
5447 for (insn = epilogue_end; insn; insn = next)
5449 next = NEXT_INSN (insn);
5451 && (NOTE_KIND (insn) == NOTE_INSN_FUNCTION_BEG))
5452 reorder_insns (insn, insn, PREV_INSN (epilogue_end));
5457 /* Threading the prologue and epilogue changes the artificial refs
5458 in the entry and exit blocks. */
5459 epilogue_completed = 1;
5460 df_update_entry_exit_and_calls ();
5463 /* Reposition the prologue-end and epilogue-begin notes after
5464 instruction scheduling. */
5467 reposition_prologue_and_epilogue_notes (void)
5469 #if defined (HAVE_prologue) || defined (HAVE_epilogue) \
5470 || defined (HAVE_sibcall_epilogue)
5471 /* Since the hash table is created on demand, the fact that it is
5472 non-null is a signal that it is non-empty. */
5473 if (prologue_insn_hash != NULL)
5475 size_t len = htab_elements (prologue_insn_hash);
5476 rtx insn, last = NULL, note = NULL;
5478 /* Scan from the beginning until we reach the last prologue insn. */
5479 /* ??? While we do have the CFG intact, there are two problems:
5480 (1) The prologue can contain loops (typically probing the stack),
5481 which means that the end of the prologue isn't in the first bb.
5482 (2) Sometimes the PROLOGUE_END note gets pushed into the next bb. */
5483 for (insn = get_insns (); insn; insn = NEXT_INSN (insn))
5487 if (NOTE_KIND (insn) == NOTE_INSN_PROLOGUE_END)
5490 else if (contains (insn, prologue_insn_hash))
5502 /* Scan forward looking for the PROLOGUE_END note. It should
5503 be right at the beginning of the block, possibly with other
5504 insn notes that got moved there. */
5505 for (note = NEXT_INSN (last); ; note = NEXT_INSN (note))
5508 && NOTE_KIND (note) == NOTE_INSN_PROLOGUE_END)
5513 /* Avoid placing note between CODE_LABEL and BASIC_BLOCK note. */
5515 last = NEXT_INSN (last);
5516 reorder_insns (note, note, last);
5520 if (epilogue_insn_hash != NULL)
5525 FOR_EACH_EDGE (e, ei, EXIT_BLOCK_PTR->preds)
5527 rtx insn, first = NULL, note = NULL;
5528 basic_block bb = e->src;
5530 /* Scan from the beginning until we reach the first epilogue insn. */
5531 FOR_BB_INSNS (bb, insn)
5535 if (NOTE_KIND (insn) == NOTE_INSN_EPILOGUE_BEG)
5542 else if (first == NULL && contains (insn, epilogue_insn_hash))
5552 /* If the function has a single basic block, and no real
5553 epilogue insns (e.g. sibcall with no cleanup), the
5554 epilogue note can get scheduled before the prologue
5555 note. If we have frame related prologue insns, having
5556 them scanned during the epilogue will result in a crash.
5557 In this case re-order the epilogue note to just before
5558 the last insn in the block. */
5560 first = BB_END (bb);
5562 if (PREV_INSN (first) != note)
5563 reorder_insns (note, note, PREV_INSN (first));
5567 #endif /* HAVE_prologue or HAVE_epilogue */
5570 /* Returns the name of the current function. */
5572 current_function_name (void)
5576 return lang_hooks.decl_printable_name (cfun->decl, 2);
5581 rest_of_handle_check_leaf_regs (void)
5583 #ifdef LEAF_REGISTERS
5584 current_function_uses_only_leaf_regs
5585 = optimize > 0 && only_leaf_regs_used () && leaf_function_p ();
5590 /* Insert a TYPE into the used types hash table of CFUN. */
5593 used_types_insert_helper (tree type, struct function *func)
5595 if (type != NULL && func != NULL)
5599 if (func->used_types_hash == NULL)
5600 func->used_types_hash = htab_create_ggc (37, htab_hash_pointer,
5601 htab_eq_pointer, NULL);
5602 slot = htab_find_slot (func->used_types_hash, type, INSERT);
5608 /* Given a type, insert it into the used hash table in cfun. */
5610 used_types_insert (tree t)
5612 while (POINTER_TYPE_P (t) || TREE_CODE (t) == ARRAY_TYPE)
5617 if (TYPE_NAME (t) == NULL_TREE
5618 || TYPE_NAME (t) == TYPE_NAME (TYPE_MAIN_VARIANT (t)))
5619 t = TYPE_MAIN_VARIANT (t);
5620 if (debug_info_level > DINFO_LEVEL_NONE)
5623 used_types_insert_helper (t, cfun);
5625 /* So this might be a type referenced by a global variable.
5626 Record that type so that we can later decide to emit its debug
5628 VEC_safe_push (tree, gc, types_used_by_cur_var_decl, t);
5632 /* Helper to Hash a struct types_used_by_vars_entry. */
5635 hash_types_used_by_vars_entry (const struct types_used_by_vars_entry *entry)
5637 gcc_assert (entry && entry->var_decl && entry->type);
5639 return iterative_hash_object (entry->type,
5640 iterative_hash_object (entry->var_decl, 0));
5643 /* Hash function of the types_used_by_vars_entry hash table. */
5646 types_used_by_vars_do_hash (const void *x)
5648 const struct types_used_by_vars_entry *entry =
5649 (const struct types_used_by_vars_entry *) x;
5651 return hash_types_used_by_vars_entry (entry);
5654 /*Equality function of the types_used_by_vars_entry hash table. */
5657 types_used_by_vars_eq (const void *x1, const void *x2)
5659 const struct types_used_by_vars_entry *e1 =
5660 (const struct types_used_by_vars_entry *) x1;
5661 const struct types_used_by_vars_entry *e2 =
5662 (const struct types_used_by_vars_entry *)x2;
5664 return (e1->var_decl == e2->var_decl && e1->type == e2->type);
5667 /* Inserts an entry into the types_used_by_vars_hash hash table. */
5670 types_used_by_var_decl_insert (tree type, tree var_decl)
5672 if (type != NULL && var_decl != NULL)
5675 struct types_used_by_vars_entry e;
5676 e.var_decl = var_decl;
5678 if (types_used_by_vars_hash == NULL)
5679 types_used_by_vars_hash =
5680 htab_create_ggc (37, types_used_by_vars_do_hash,
5681 types_used_by_vars_eq, NULL);
5682 slot = htab_find_slot_with_hash (types_used_by_vars_hash, &e,
5683 hash_types_used_by_vars_entry (&e), INSERT);
5686 struct types_used_by_vars_entry *entry;
5687 entry = ggc_alloc_types_used_by_vars_entry ();
5689 entry->var_decl = var_decl;
5695 struct rtl_opt_pass pass_leaf_regs =
5699 "*leaf_regs", /* name */
5701 rest_of_handle_check_leaf_regs, /* execute */
5704 0, /* static_pass_number */
5705 TV_NONE, /* tv_id */
5706 0, /* properties_required */
5707 0, /* properties_provided */
5708 0, /* properties_destroyed */
5709 0, /* todo_flags_start */
5710 0 /* todo_flags_finish */
5715 rest_of_handle_thread_prologue_and_epilogue (void)
5718 cleanup_cfg (CLEANUP_EXPENSIVE);
5719 /* On some machines, the prologue and epilogue code, or parts thereof,
5720 can be represented as RTL. Doing so lets us schedule insns between
5721 it and the rest of the code and also allows delayed branch
5722 scheduling to operate in the epilogue. */
5724 thread_prologue_and_epilogue_insns ();
5728 struct rtl_opt_pass pass_thread_prologue_and_epilogue =
5732 "pro_and_epilogue", /* name */
5734 rest_of_handle_thread_prologue_and_epilogue, /* execute */
5737 0, /* static_pass_number */
5738 TV_THREAD_PROLOGUE_AND_EPILOGUE, /* tv_id */
5739 0, /* properties_required */
5740 0, /* properties_provided */
5741 0, /* properties_destroyed */
5742 TODO_verify_flow, /* todo_flags_start */
5745 TODO_df_finish | TODO_verify_rtl_sharing |
5746 TODO_ggc_collect /* todo_flags_finish */
5751 /* This mini-pass fixes fall-out from SSA in asm statements that have
5752 in-out constraints. Say you start with
5755 asm ("": "+mr" (inout));
5758 which is transformed very early to use explicit output and match operands:
5761 asm ("": "=mr" (inout) : "0" (inout));
5764 Or, after SSA and copyprop,
5766 asm ("": "=mr" (inout_2) : "0" (inout_1));
5769 Clearly inout_2 and inout_1 can't be coalesced easily anymore, as
5770 they represent two separate values, so they will get different pseudo
5771 registers during expansion. Then, since the two operands need to match
5772 per the constraints, but use different pseudo registers, reload can
5773 only register a reload for these operands. But reloads can only be
5774 satisfied by hardregs, not by memory, so we need a register for this
5775 reload, just because we are presented with non-matching operands.
5776 So, even though we allow memory for this operand, no memory can be
5777 used for it, just because the two operands don't match. This can
5778 cause reload failures on register-starved targets.
5780 So it's a symptom of reload not being able to use memory for reloads
5781 or, alternatively it's also a symptom of both operands not coming into
5782 reload as matching (in which case the pseudo could go to memory just
5783 fine, as the alternative allows it, and no reload would be necessary).
5784 We fix the latter problem here, by transforming
5786 asm ("": "=mr" (inout_2) : "0" (inout_1));
5791 asm ("": "=mr" (inout_2) : "0" (inout_2)); */
5794 match_asm_constraints_1 (rtx insn, rtx *p_sets, int noutputs)
5797 bool changed = false;
5798 rtx op = SET_SRC (p_sets[0]);
5799 int ninputs = ASM_OPERANDS_INPUT_LENGTH (op);
5800 rtvec inputs = ASM_OPERANDS_INPUT_VEC (op);
5801 bool *output_matched = XALLOCAVEC (bool, noutputs);
5803 memset (output_matched, 0, noutputs * sizeof (bool));
5804 for (i = 0; i < ninputs; i++)
5806 rtx input, output, insns;
5807 const char *constraint = ASM_OPERANDS_INPUT_CONSTRAINT (op, i);
5811 if (*constraint == '%')
5814 match = strtoul (constraint, &end, 10);
5815 if (end == constraint)
5818 gcc_assert (match < noutputs);
5819 output = SET_DEST (p_sets[match]);
5820 input = RTVEC_ELT (inputs, i);
5821 /* Only do the transformation for pseudos. */
5822 if (! REG_P (output)
5823 || rtx_equal_p (output, input)
5824 || (GET_MODE (input) != VOIDmode
5825 && GET_MODE (input) != GET_MODE (output)))
5828 /* We can't do anything if the output is also used as input,
5829 as we're going to overwrite it. */
5830 for (j = 0; j < ninputs; j++)
5831 if (reg_overlap_mentioned_p (output, RTVEC_ELT (inputs, j)))
5836 /* Avoid changing the same input several times. For
5837 asm ("" : "=mr" (out1), "=mr" (out2) : "0" (in), "1" (in));
5838 only change in once (to out1), rather than changing it
5839 first to out1 and afterwards to out2. */
5842 for (j = 0; j < noutputs; j++)
5843 if (output_matched[j] && input == SET_DEST (p_sets[j]))
5848 output_matched[match] = true;
5851 emit_move_insn (output, input);
5852 insns = get_insns ();
5854 emit_insn_before (insns, insn);
5856 /* Now replace all mentions of the input with output. We can't
5857 just replace the occurrence in inputs[i], as the register might
5858 also be used in some other input (or even in an address of an
5859 output), which would mean possibly increasing the number of
5860 inputs by one (namely 'output' in addition), which might pose
5861 a too complicated problem for reload to solve. E.g. this situation:
5863 asm ("" : "=r" (output), "=m" (input) : "0" (input))
5865 Here 'input' is used in two occurrences as input (once for the
5866 input operand, once for the address in the second output operand).
5867 If we would replace only the occurrence of the input operand (to
5868 make the matching) we would be left with this:
5871 asm ("" : "=r" (output), "=m" (input) : "0" (output))
5873 Now we suddenly have two different input values (containing the same
5874 value, but different pseudos) where we formerly had only one.
5875 With more complicated asms this might lead to reload failures
5876 which wouldn't have happen without this pass. So, iterate over
5877 all operands and replace all occurrences of the register used. */
5878 for (j = 0; j < noutputs; j++)
5879 if (!rtx_equal_p (SET_DEST (p_sets[j]), input)
5880 && reg_overlap_mentioned_p (input, SET_DEST (p_sets[j])))
5881 SET_DEST (p_sets[j]) = replace_rtx (SET_DEST (p_sets[j]),
5883 for (j = 0; j < ninputs; j++)
5884 if (reg_overlap_mentioned_p (input, RTVEC_ELT (inputs, j)))
5885 RTVEC_ELT (inputs, j) = replace_rtx (RTVEC_ELT (inputs, j),
5892 df_insn_rescan (insn);
5896 rest_of_match_asm_constraints (void)
5899 rtx insn, pat, *p_sets;
5902 if (!crtl->has_asm_statement)
5905 df_set_flags (DF_DEFER_INSN_RESCAN);
5908 FOR_BB_INSNS (bb, insn)
5913 pat = PATTERN (insn);
5914 if (GET_CODE (pat) == PARALLEL)
5915 p_sets = &XVECEXP (pat, 0, 0), noutputs = XVECLEN (pat, 0);
5916 else if (GET_CODE (pat) == SET)
5917 p_sets = &PATTERN (insn), noutputs = 1;
5921 if (GET_CODE (*p_sets) == SET
5922 && GET_CODE (SET_SRC (*p_sets)) == ASM_OPERANDS)
5923 match_asm_constraints_1 (insn, p_sets, noutputs);
5927 return TODO_df_finish;
5930 struct rtl_opt_pass pass_match_asm_constraints =
5934 "asmcons", /* name */
5936 rest_of_match_asm_constraints, /* execute */
5939 0, /* static_pass_number */
5940 TV_NONE, /* tv_id */
5941 0, /* properties_required */
5942 0, /* properties_provided */
5943 0, /* properties_destroyed */
5944 0, /* todo_flags_start */
5945 TODO_dump_func /* todo_flags_finish */
5950 #include "gt-function.h"