1 /* Expands front end tree to back end RTL for GCC.
2 Copyright (C) 1987, 1988, 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
3 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
4 Free Software Foundation, Inc.
6 This file is part of GCC.
8 GCC is free software; you can redistribute it and/or modify it under
9 the terms of the GNU General Public License as published by the Free
10 Software Foundation; either version 2, or (at your option) any later
13 GCC is distributed in the hope that it will be useful, but WITHOUT ANY
14 WARRANTY; without even the implied warranty of MERCHANTABILITY or
15 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
18 You should have received a copy of the GNU General Public License
19 along with GCC; see the file COPYING. If not, write to the Free
20 Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
23 /* This file handles the generation of rtl code from tree structure
24 at the level of the function as a whole.
25 It creates the rtl expressions for parameters and auto variables
26 and has full responsibility for allocating stack slots.
28 `expand_function_start' is called at the beginning of a function,
29 before the function body is parsed, and `expand_function_end' is
30 called after parsing the body.
32 Call `assign_stack_local' to allocate a stack slot for a local variable.
33 This is usually done during the RTL generation for the function body,
34 but it can also be done in the reload pass when a pseudo-register does
35 not get a hard register. */
39 #include "coretypes.h"
50 #include "hard-reg-set.h"
51 #include "insn-config.h"
54 #include "basic-block.h"
59 #include "integrate.h"
60 #include "langhooks.h"
62 #include "cfglayout.h"
63 #include "tree-gimple.h"
64 #include "tree-pass.h"
67 #ifndef LOCAL_ALIGNMENT
68 #define LOCAL_ALIGNMENT(TYPE, ALIGNMENT) ALIGNMENT
71 #ifndef STACK_ALIGNMENT_NEEDED
72 #define STACK_ALIGNMENT_NEEDED 1
75 #define STACK_BYTES (STACK_BOUNDARY / BITS_PER_UNIT)
77 /* Some systems use __main in a way incompatible with its use in gcc, in these
78 cases use the macros NAME__MAIN to give a quoted symbol and SYMBOL__MAIN to
79 give the same symbol without quotes for an alternative entry point. You
80 must define both, or neither. */
82 #define NAME__MAIN "__main"
85 /* Round a value to the lowest integer less than it that is a multiple of
86 the required alignment. Avoid using division in case the value is
87 negative. Assume the alignment is a power of two. */
88 #define FLOOR_ROUND(VALUE,ALIGN) ((VALUE) & ~((ALIGN) - 1))
90 /* Similar, but round to the next highest integer that meets the
92 #define CEIL_ROUND(VALUE,ALIGN) (((VALUE) + (ALIGN) - 1) & ~((ALIGN)- 1))
94 /* Nonzero if function being compiled doesn't contain any calls
95 (ignoring the prologue and epilogue). This is set prior to
96 local register allocation and is valid for the remaining
98 int current_function_is_leaf;
100 /* Nonzero if function being compiled doesn't modify the stack pointer
101 (ignoring the prologue and epilogue). This is only valid after
102 life_analysis has run. */
103 int current_function_sp_is_unchanging;
105 /* Nonzero if the function being compiled is a leaf function which only
106 uses leaf registers. This is valid after reload (specifically after
107 sched2) and is useful only if the port defines LEAF_REGISTERS. */
108 int current_function_uses_only_leaf_regs;
110 /* Nonzero once virtual register instantiation has been done.
111 assign_stack_local uses frame_pointer_rtx when this is nonzero.
112 calls.c:emit_library_call_value_1 uses it to set up
113 post-instantiation libcalls. */
114 int virtuals_instantiated;
116 /* Assign unique numbers to labels generated for profiling, debugging, etc. */
117 static GTY(()) int funcdef_no;
119 /* These variables hold pointers to functions to create and destroy
120 target specific, per-function data structures. */
121 struct machine_function * (*init_machine_status) (void);
123 /* The currently compiled function. */
124 struct function *cfun = 0;
127 DEF_VEC_ALLOC_I(int,heap);
129 /* These arrays record the INSN_UIDs of the prologue and epilogue insns. */
130 static VEC(int,heap) *prologue;
131 static VEC(int,heap) *epilogue;
133 /* Array of INSN_UIDs to hold the INSN_UIDs for each sibcall epilogue
135 static VEC(int,heap) *sibcall_epilogue;
137 /* In order to evaluate some expressions, such as function calls returning
138 structures in memory, we need to temporarily allocate stack locations.
139 We record each allocated temporary in the following structure.
141 Associated with each temporary slot is a nesting level. When we pop up
142 one level, all temporaries associated with the previous level are freed.
143 Normally, all temporaries are freed after the execution of the statement
144 in which they were created. However, if we are inside a ({...}) grouping,
145 the result may be in a temporary and hence must be preserved. If the
146 result could be in a temporary, we preserve it if we can determine which
147 one it is in. If we cannot determine which temporary may contain the
148 result, all temporaries are preserved. A temporary is preserved by
149 pretending it was allocated at the previous nesting level.
151 Automatic variables are also assigned temporary slots, at the nesting
152 level where they are defined. They are marked a "kept" so that
153 free_temp_slots will not free them. */
155 struct temp_slot GTY(())
157 /* Points to next temporary slot. */
158 struct temp_slot *next;
159 /* Points to previous temporary slot. */
160 struct temp_slot *prev;
162 /* The rtx to used to reference the slot. */
164 /* The rtx used to represent the address if not the address of the
165 slot above. May be an EXPR_LIST if multiple addresses exist. */
167 /* The alignment (in bits) of the slot. */
169 /* The size, in units, of the slot. */
171 /* The type of the object in the slot, or zero if it doesn't correspond
172 to a type. We use this to determine whether a slot can be reused.
173 It can be reused if objects of the type of the new slot will always
174 conflict with objects of the type of the old slot. */
176 /* Nonzero if this temporary is currently in use. */
178 /* Nonzero if this temporary has its address taken. */
180 /* Nesting level at which this slot is being used. */
182 /* Nonzero if this should survive a call to free_temp_slots. */
184 /* The offset of the slot from the frame_pointer, including extra space
185 for alignment. This info is for combine_temp_slots. */
186 HOST_WIDE_INT base_offset;
187 /* The size of the slot, including extra space for alignment. This
188 info is for combine_temp_slots. */
189 HOST_WIDE_INT full_size;
192 /* Forward declarations. */
194 static rtx assign_stack_local_1 (enum machine_mode, HOST_WIDE_INT, int,
196 static struct temp_slot *find_temp_slot_from_address (rtx);
197 static void pad_to_arg_alignment (struct args_size *, int, struct args_size *);
198 static void pad_below (struct args_size *, enum machine_mode, tree);
199 static void reorder_blocks_1 (rtx, tree, VEC(tree,heap) **);
200 static void reorder_fix_fragments (tree);
201 static int all_blocks (tree, tree *);
202 static tree *get_block_vector (tree, int *);
203 extern tree debug_find_var_in_block_tree (tree, tree);
204 /* We always define `record_insns' even if it's not used so that we
205 can always export `prologue_epilogue_contains'. */
206 static void record_insns (rtx, VEC(int,heap) **) ATTRIBUTE_UNUSED;
207 static int contains (rtx, VEC(int,heap) **);
209 static void emit_return_into_block (basic_block, rtx);
211 #if defined(HAVE_epilogue) && defined(INCOMING_RETURN_ADDR_RTX)
212 static rtx keep_stack_depressed (rtx);
214 static void prepare_function_start (tree);
215 static void do_clobber_return_reg (rtx, void *);
216 static void do_use_return_reg (rtx, void *);
217 static void set_insn_locators (rtx, int) ATTRIBUTE_UNUSED;
219 /* Pointer to chain of `struct function' for containing functions. */
220 struct function *outer_function_chain;
222 /* Given a function decl for a containing function,
223 return the `struct function' for it. */
226 find_function_data (tree decl)
230 for (p = outer_function_chain; p; p = p->outer)
237 /* Save the current context for compilation of a nested function.
238 This is called from language-specific code. The caller should use
239 the enter_nested langhook to save any language-specific state,
240 since this function knows only about language-independent
244 push_function_context_to (tree context ATTRIBUTE_UNUSED)
249 init_dummy_function_start ();
252 p->outer = outer_function_chain;
253 outer_function_chain = p;
255 lang_hooks.function.enter_nested (p);
261 push_function_context (void)
263 push_function_context_to (current_function_decl);
266 /* Restore the last saved context, at the end of a nested function.
267 This function is called from language-specific code. */
270 pop_function_context_from (tree context ATTRIBUTE_UNUSED)
272 struct function *p = outer_function_chain;
275 outer_function_chain = p->outer;
277 current_function_decl = p->decl;
279 lang_hooks.function.leave_nested (p);
281 /* Reset variables that have known state during rtx generation. */
282 virtuals_instantiated = 0;
283 generating_concat_p = 1;
287 pop_function_context (void)
289 pop_function_context_from (current_function_decl);
292 /* Clear out all parts of the state in F that can safely be discarded
293 after the function has been parsed, but not compiled, to let
294 garbage collection reclaim the memory. */
297 free_after_parsing (struct function *f)
299 /* f->expr->forced_labels is used by code generation. */
300 /* f->emit->regno_reg_rtx is used by code generation. */
301 /* f->varasm is used by code generation. */
302 /* f->eh->eh_return_stub_label is used by code generation. */
304 lang_hooks.function.final (f);
307 /* Clear out all parts of the state in F that can safely be discarded
308 after the function has been compiled, to let garbage collection
309 reclaim the memory. */
312 free_after_compilation (struct function *f)
314 VEC_free (int, heap, prologue);
315 VEC_free (int, heap, epilogue);
316 VEC_free (int, heap, sibcall_epilogue);
325 f->x_avail_temp_slots = NULL;
326 f->x_used_temp_slots = NULL;
327 f->arg_offset_rtx = NULL;
328 f->return_rtx = NULL;
329 f->internal_arg_pointer = NULL;
330 f->x_nonlocal_goto_handler_labels = NULL;
331 f->x_return_label = NULL;
332 f->x_naked_return_label = NULL;
333 f->x_stack_slot_list = NULL;
334 f->x_tail_recursion_reentry = NULL;
335 f->x_arg_pointer_save_area = NULL;
336 f->x_parm_birth_insn = NULL;
337 f->original_arg_vector = NULL;
338 f->original_decl_initial = NULL;
339 f->epilogue_delay_list = NULL;
342 /* Allocate fixed slots in the stack frame of the current function. */
344 /* Return size needed for stack frame based on slots so far allocated in
346 This size counts from zero. It is not rounded to PREFERRED_STACK_BOUNDARY;
347 the caller may have to do that. */
350 get_func_frame_size (struct function *f)
352 if (FRAME_GROWS_DOWNWARD)
353 return -f->x_frame_offset;
355 return f->x_frame_offset;
358 /* Return size needed for stack frame based on slots so far allocated.
359 This size counts from zero. It is not rounded to PREFERRED_STACK_BOUNDARY;
360 the caller may have to do that. */
362 get_frame_size (void)
364 return get_func_frame_size (cfun);
367 /* Allocate a stack slot of SIZE bytes and return a MEM rtx for it
368 with machine mode MODE.
370 ALIGN controls the amount of alignment for the address of the slot:
371 0 means according to MODE,
372 -1 means use BIGGEST_ALIGNMENT and round size to multiple of that,
373 -2 means use BITS_PER_UNIT,
374 positive specifies alignment boundary in bits.
376 We do not round to stack_boundary here.
378 FUNCTION specifies the function to allocate in. */
381 assign_stack_local_1 (enum machine_mode mode, HOST_WIDE_INT size, int align,
382 struct function *function)
385 int bigend_correction = 0;
386 unsigned int alignment;
387 int frame_off, frame_alignment, frame_phase;
394 alignment = BIGGEST_ALIGNMENT;
396 alignment = GET_MODE_ALIGNMENT (mode);
398 /* Allow the target to (possibly) increase the alignment of this
400 type = lang_hooks.types.type_for_mode (mode, 0);
402 alignment = LOCAL_ALIGNMENT (type, alignment);
404 alignment /= BITS_PER_UNIT;
406 else if (align == -1)
408 alignment = BIGGEST_ALIGNMENT / BITS_PER_UNIT;
409 size = CEIL_ROUND (size, alignment);
411 else if (align == -2)
412 alignment = 1; /* BITS_PER_UNIT / BITS_PER_UNIT */
414 alignment = align / BITS_PER_UNIT;
416 if (FRAME_GROWS_DOWNWARD)
417 function->x_frame_offset -= size;
419 /* Ignore alignment we can't do with expected alignment of the boundary. */
420 if (alignment * BITS_PER_UNIT > PREFERRED_STACK_BOUNDARY)
421 alignment = PREFERRED_STACK_BOUNDARY / BITS_PER_UNIT;
423 if (function->stack_alignment_needed < alignment * BITS_PER_UNIT)
424 function->stack_alignment_needed = alignment * BITS_PER_UNIT;
426 /* Calculate how many bytes the start of local variables is off from
428 frame_alignment = PREFERRED_STACK_BOUNDARY / BITS_PER_UNIT;
429 frame_off = STARTING_FRAME_OFFSET % frame_alignment;
430 frame_phase = frame_off ? frame_alignment - frame_off : 0;
432 /* Round the frame offset to the specified alignment. The default is
433 to always honor requests to align the stack but a port may choose to
434 do its own stack alignment by defining STACK_ALIGNMENT_NEEDED. */
435 if (STACK_ALIGNMENT_NEEDED
439 /* We must be careful here, since FRAME_OFFSET might be negative and
440 division with a negative dividend isn't as well defined as we might
441 like. So we instead assume that ALIGNMENT is a power of two and
442 use logical operations which are unambiguous. */
443 if (FRAME_GROWS_DOWNWARD)
444 function->x_frame_offset
445 = (FLOOR_ROUND (function->x_frame_offset - frame_phase,
446 (unsigned HOST_WIDE_INT) alignment)
449 function->x_frame_offset
450 = (CEIL_ROUND (function->x_frame_offset - frame_phase,
451 (unsigned HOST_WIDE_INT) alignment)
455 /* On a big-endian machine, if we are allocating more space than we will use,
456 use the least significant bytes of those that are allocated. */
457 if (BYTES_BIG_ENDIAN && mode != BLKmode && GET_MODE_SIZE (mode) < size)
458 bigend_correction = size - GET_MODE_SIZE (mode);
460 /* If we have already instantiated virtual registers, return the actual
461 address relative to the frame pointer. */
462 if (function == cfun && virtuals_instantiated)
463 addr = plus_constant (frame_pointer_rtx,
465 (frame_offset + bigend_correction
466 + STARTING_FRAME_OFFSET, Pmode));
468 addr = plus_constant (virtual_stack_vars_rtx,
470 (function->x_frame_offset + bigend_correction,
473 if (!FRAME_GROWS_DOWNWARD)
474 function->x_frame_offset += size;
476 x = gen_rtx_MEM (mode, addr);
477 MEM_NOTRAP_P (x) = 1;
479 function->x_stack_slot_list
480 = gen_rtx_EXPR_LIST (VOIDmode, x, function->x_stack_slot_list);
485 /* Wrapper around assign_stack_local_1; assign a local stack slot for the
489 assign_stack_local (enum machine_mode mode, HOST_WIDE_INT size, int align)
491 return assign_stack_local_1 (mode, size, align, cfun);
495 /* Removes temporary slot TEMP from LIST. */
498 cut_slot_from_list (struct temp_slot *temp, struct temp_slot **list)
501 temp->next->prev = temp->prev;
503 temp->prev->next = temp->next;
507 temp->prev = temp->next = NULL;
510 /* Inserts temporary slot TEMP to LIST. */
513 insert_slot_to_list (struct temp_slot *temp, struct temp_slot **list)
517 (*list)->prev = temp;
522 /* Returns the list of used temp slots at LEVEL. */
524 static struct temp_slot **
525 temp_slots_at_level (int level)
528 if (!used_temp_slots)
529 VARRAY_GENERIC_PTR_INIT (used_temp_slots, 3, "used_temp_slots");
531 while (level >= (int) VARRAY_ACTIVE_SIZE (used_temp_slots))
532 VARRAY_PUSH_GENERIC_PTR (used_temp_slots, NULL);
534 return (struct temp_slot **) &VARRAY_GENERIC_PTR (used_temp_slots, level);
537 /* Returns the maximal temporary slot level. */
540 max_slot_level (void)
542 if (!used_temp_slots)
545 return VARRAY_ACTIVE_SIZE (used_temp_slots) - 1;
548 /* Moves temporary slot TEMP to LEVEL. */
551 move_slot_to_level (struct temp_slot *temp, int level)
553 cut_slot_from_list (temp, temp_slots_at_level (temp->level));
554 insert_slot_to_list (temp, temp_slots_at_level (level));
558 /* Make temporary slot TEMP available. */
561 make_slot_available (struct temp_slot *temp)
563 cut_slot_from_list (temp, temp_slots_at_level (temp->level));
564 insert_slot_to_list (temp, &avail_temp_slots);
569 /* Allocate a temporary stack slot and record it for possible later
572 MODE is the machine mode to be given to the returned rtx.
574 SIZE is the size in units of the space required. We do no rounding here
575 since assign_stack_local will do any required rounding.
577 KEEP is 1 if this slot is to be retained after a call to
578 free_temp_slots. Automatic variables for a block are allocated
579 with this flag. KEEP values of 2 or 3 were needed respectively
580 for variables whose lifetime is controlled by CLEANUP_POINT_EXPRs
581 or for SAVE_EXPRs, but they are now unused.
583 TYPE is the type that will be used for the stack slot. */
586 assign_stack_temp_for_type (enum machine_mode mode, HOST_WIDE_INT size,
590 struct temp_slot *p, *best_p = 0, *selected = NULL, **pp;
593 /* If SIZE is -1 it means that somebody tried to allocate a temporary
594 of a variable size. */
595 gcc_assert (size != -1);
597 /* These are now unused. */
598 gcc_assert (keep <= 1);
601 align = BIGGEST_ALIGNMENT;
603 align = GET_MODE_ALIGNMENT (mode);
606 type = lang_hooks.types.type_for_mode (mode, 0);
609 align = LOCAL_ALIGNMENT (type, align);
611 /* Try to find an available, already-allocated temporary of the proper
612 mode which meets the size and alignment requirements. Choose the
613 smallest one with the closest alignment. */
614 for (p = avail_temp_slots; p; p = p->next)
616 if (p->align >= align && p->size >= size && GET_MODE (p->slot) == mode
617 && objects_must_conflict_p (p->type, type)
618 && (best_p == 0 || best_p->size > p->size
619 || (best_p->size == p->size && best_p->align > p->align)))
621 if (p->align == align && p->size == size)
624 cut_slot_from_list (selected, &avail_temp_slots);
632 /* Make our best, if any, the one to use. */
636 cut_slot_from_list (selected, &avail_temp_slots);
638 /* If there are enough aligned bytes left over, make them into a new
639 temp_slot so that the extra bytes don't get wasted. Do this only
640 for BLKmode slots, so that we can be sure of the alignment. */
641 if (GET_MODE (best_p->slot) == BLKmode)
643 int alignment = best_p->align / BITS_PER_UNIT;
644 HOST_WIDE_INT rounded_size = CEIL_ROUND (size, alignment);
646 if (best_p->size - rounded_size >= alignment)
648 p = ggc_alloc (sizeof (struct temp_slot));
649 p->in_use = p->addr_taken = 0;
650 p->size = best_p->size - rounded_size;
651 p->base_offset = best_p->base_offset + rounded_size;
652 p->full_size = best_p->full_size - rounded_size;
653 p->slot = adjust_address_nv (best_p->slot, BLKmode, rounded_size);
654 p->align = best_p->align;
656 p->type = best_p->type;
657 insert_slot_to_list (p, &avail_temp_slots);
659 stack_slot_list = gen_rtx_EXPR_LIST (VOIDmode, p->slot,
662 best_p->size = rounded_size;
663 best_p->full_size = rounded_size;
668 /* If we still didn't find one, make a new temporary. */
671 HOST_WIDE_INT frame_offset_old = frame_offset;
673 p = ggc_alloc (sizeof (struct temp_slot));
675 /* We are passing an explicit alignment request to assign_stack_local.
676 One side effect of that is assign_stack_local will not round SIZE
677 to ensure the frame offset remains suitably aligned.
679 So for requests which depended on the rounding of SIZE, we go ahead
680 and round it now. We also make sure ALIGNMENT is at least
681 BIGGEST_ALIGNMENT. */
682 gcc_assert (mode != BLKmode || align == BIGGEST_ALIGNMENT);
683 p->slot = assign_stack_local (mode,
685 ? CEIL_ROUND (size, (int) align / BITS_PER_UNIT)
691 /* The following slot size computation is necessary because we don't
692 know the actual size of the temporary slot until assign_stack_local
693 has performed all the frame alignment and size rounding for the
694 requested temporary. Note that extra space added for alignment
695 can be either above or below this stack slot depending on which
696 way the frame grows. We include the extra space if and only if it
697 is above this slot. */
698 if (FRAME_GROWS_DOWNWARD)
699 p->size = frame_offset_old - frame_offset;
703 /* Now define the fields used by combine_temp_slots. */
704 if (FRAME_GROWS_DOWNWARD)
706 p->base_offset = frame_offset;
707 p->full_size = frame_offset_old - frame_offset;
711 p->base_offset = frame_offset_old;
712 p->full_size = frame_offset - frame_offset_old;
723 p->level = temp_slot_level;
726 pp = temp_slots_at_level (p->level);
727 insert_slot_to_list (p, pp);
729 /* Create a new MEM rtx to avoid clobbering MEM flags of old slots. */
730 slot = gen_rtx_MEM (mode, XEXP (p->slot, 0));
731 stack_slot_list = gen_rtx_EXPR_LIST (VOIDmode, slot, stack_slot_list);
733 /* If we know the alias set for the memory that will be used, use
734 it. If there's no TYPE, then we don't know anything about the
735 alias set for the memory. */
736 set_mem_alias_set (slot, type ? get_alias_set (type) : 0);
737 set_mem_align (slot, align);
739 /* If a type is specified, set the relevant flags. */
742 MEM_VOLATILE_P (slot) = TYPE_VOLATILE (type);
743 MEM_SET_IN_STRUCT_P (slot, AGGREGATE_TYPE_P (type));
745 MEM_NOTRAP_P (slot) = 1;
750 /* Allocate a temporary stack slot and record it for possible later
751 reuse. First three arguments are same as in preceding function. */
754 assign_stack_temp (enum machine_mode mode, HOST_WIDE_INT size, int keep)
756 return assign_stack_temp_for_type (mode, size, keep, NULL_TREE);
759 /* Assign a temporary.
760 If TYPE_OR_DECL is a decl, then we are doing it on behalf of the decl
761 and so that should be used in error messages. In either case, we
762 allocate of the given type.
763 KEEP is as for assign_stack_temp.
764 MEMORY_REQUIRED is 1 if the result must be addressable stack memory;
765 it is 0 if a register is OK.
766 DONT_PROMOTE is 1 if we should not promote values in register
770 assign_temp (tree type_or_decl, int keep, int memory_required,
771 int dont_promote ATTRIBUTE_UNUSED)
774 enum machine_mode mode;
779 if (DECL_P (type_or_decl))
780 decl = type_or_decl, type = TREE_TYPE (decl);
782 decl = NULL, type = type_or_decl;
784 mode = TYPE_MODE (type);
786 unsignedp = TYPE_UNSIGNED (type);
789 if (mode == BLKmode || memory_required)
791 HOST_WIDE_INT size = int_size_in_bytes (type);
795 /* Zero sized arrays are GNU C extension. Set size to 1 to avoid
796 problems with allocating the stack space. */
800 /* Unfortunately, we don't yet know how to allocate variable-sized
801 temporaries. However, sometimes we have a fixed upper limit on
802 the size (which is stored in TYPE_ARRAY_MAX_SIZE) and can use that
803 instead. This is the case for Chill variable-sized strings. */
804 if (size == -1 && TREE_CODE (type) == ARRAY_TYPE
805 && TYPE_ARRAY_MAX_SIZE (type) != NULL_TREE
806 && host_integerp (TYPE_ARRAY_MAX_SIZE (type), 1))
807 size = tree_low_cst (TYPE_ARRAY_MAX_SIZE (type), 1);
809 /* If we still haven't been able to get a size, see if the language
810 can compute a maximum size. */
812 && (size_tree = lang_hooks.types.max_size (type)) != 0
813 && host_integerp (size_tree, 1))
814 size = tree_low_cst (size_tree, 1);
816 /* The size of the temporary may be too large to fit into an integer. */
817 /* ??? Not sure this should happen except for user silliness, so limit
818 this to things that aren't compiler-generated temporaries. The
819 rest of the time we'll die in assign_stack_temp_for_type. */
820 if (decl && size == -1
821 && TREE_CODE (TYPE_SIZE_UNIT (type)) == INTEGER_CST)
823 error ("size of variable %q+D is too large", decl);
827 tmp = assign_stack_temp_for_type (mode, size, keep, type);
833 mode = promote_mode (type, mode, &unsignedp, 0);
836 return gen_reg_rtx (mode);
839 /* Combine temporary stack slots which are adjacent on the stack.
841 This allows for better use of already allocated stack space. This is only
842 done for BLKmode slots because we can be sure that we won't have alignment
843 problems in this case. */
846 combine_temp_slots (void)
848 struct temp_slot *p, *q, *next, *next_q;
851 /* We can't combine slots, because the information about which slot
852 is in which alias set will be lost. */
853 if (flag_strict_aliasing)
856 /* If there are a lot of temp slots, don't do anything unless
857 high levels of optimization. */
858 if (! flag_expensive_optimizations)
859 for (p = avail_temp_slots, num_slots = 0; p; p = p->next, num_slots++)
860 if (num_slots > 100 || (num_slots > 10 && optimize == 0))
863 for (p = avail_temp_slots; p; p = next)
869 if (GET_MODE (p->slot) != BLKmode)
872 for (q = p->next; q; q = next_q)
878 if (GET_MODE (q->slot) != BLKmode)
881 if (p->base_offset + p->full_size == q->base_offset)
883 /* Q comes after P; combine Q into P. */
885 p->full_size += q->full_size;
888 else if (q->base_offset + q->full_size == p->base_offset)
890 /* P comes after Q; combine P into Q. */
892 q->full_size += p->full_size;
897 cut_slot_from_list (q, &avail_temp_slots);
900 /* Either delete P or advance past it. */
902 cut_slot_from_list (p, &avail_temp_slots);
906 /* Find the temp slot corresponding to the object at address X. */
908 static struct temp_slot *
909 find_temp_slot_from_address (rtx x)
915 for (i = max_slot_level (); i >= 0; i--)
916 for (p = *temp_slots_at_level (i); p; p = p->next)
918 if (XEXP (p->slot, 0) == x
920 || (GET_CODE (x) == PLUS
921 && XEXP (x, 0) == virtual_stack_vars_rtx
922 && GET_CODE (XEXP (x, 1)) == CONST_INT
923 && INTVAL (XEXP (x, 1)) >= p->base_offset
924 && INTVAL (XEXP (x, 1)) < p->base_offset + p->full_size))
927 else if (p->address != 0 && GET_CODE (p->address) == EXPR_LIST)
928 for (next = p->address; next; next = XEXP (next, 1))
929 if (XEXP (next, 0) == x)
933 /* If we have a sum involving a register, see if it points to a temp
935 if (GET_CODE (x) == PLUS && REG_P (XEXP (x, 0))
936 && (p = find_temp_slot_from_address (XEXP (x, 0))) != 0)
938 else if (GET_CODE (x) == PLUS && REG_P (XEXP (x, 1))
939 && (p = find_temp_slot_from_address (XEXP (x, 1))) != 0)
945 /* Indicate that NEW is an alternate way of referring to the temp slot
946 that previously was known by OLD. */
949 update_temp_slot_address (rtx old, rtx new)
953 if (rtx_equal_p (old, new))
956 p = find_temp_slot_from_address (old);
958 /* If we didn't find one, see if both OLD is a PLUS. If so, and NEW
959 is a register, see if one operand of the PLUS is a temporary
960 location. If so, NEW points into it. Otherwise, if both OLD and
961 NEW are a PLUS and if there is a register in common between them.
962 If so, try a recursive call on those values. */
965 if (GET_CODE (old) != PLUS)
970 update_temp_slot_address (XEXP (old, 0), new);
971 update_temp_slot_address (XEXP (old, 1), new);
974 else if (GET_CODE (new) != PLUS)
977 if (rtx_equal_p (XEXP (old, 0), XEXP (new, 0)))
978 update_temp_slot_address (XEXP (old, 1), XEXP (new, 1));
979 else if (rtx_equal_p (XEXP (old, 1), XEXP (new, 0)))
980 update_temp_slot_address (XEXP (old, 0), XEXP (new, 1));
981 else if (rtx_equal_p (XEXP (old, 0), XEXP (new, 1)))
982 update_temp_slot_address (XEXP (old, 1), XEXP (new, 0));
983 else if (rtx_equal_p (XEXP (old, 1), XEXP (new, 1)))
984 update_temp_slot_address (XEXP (old, 0), XEXP (new, 0));
989 /* Otherwise add an alias for the temp's address. */
990 else if (p->address == 0)
994 if (GET_CODE (p->address) != EXPR_LIST)
995 p->address = gen_rtx_EXPR_LIST (VOIDmode, p->address, NULL_RTX);
997 p->address = gen_rtx_EXPR_LIST (VOIDmode, new, p->address);
1001 /* If X could be a reference to a temporary slot, mark the fact that its
1002 address was taken. */
1005 mark_temp_addr_taken (rtx x)
1007 struct temp_slot *p;
1012 /* If X is not in memory or is at a constant address, it cannot be in
1013 a temporary slot. */
1014 if (!MEM_P (x) || CONSTANT_P (XEXP (x, 0)))
1017 p = find_temp_slot_from_address (XEXP (x, 0));
1022 /* If X could be a reference to a temporary slot, mark that slot as
1023 belonging to the to one level higher than the current level. If X
1024 matched one of our slots, just mark that one. Otherwise, we can't
1025 easily predict which it is, so upgrade all of them. Kept slots
1026 need not be touched.
1028 This is called when an ({...}) construct occurs and a statement
1029 returns a value in memory. */
1032 preserve_temp_slots (rtx x)
1034 struct temp_slot *p = 0, *next;
1036 /* If there is no result, we still might have some objects whose address
1037 were taken, so we need to make sure they stay around. */
1040 for (p = *temp_slots_at_level (temp_slot_level); p; p = next)
1045 move_slot_to_level (p, temp_slot_level - 1);
1051 /* If X is a register that is being used as a pointer, see if we have
1052 a temporary slot we know it points to. To be consistent with
1053 the code below, we really should preserve all non-kept slots
1054 if we can't find a match, but that seems to be much too costly. */
1055 if (REG_P (x) && REG_POINTER (x))
1056 p = find_temp_slot_from_address (x);
1058 /* If X is not in memory or is at a constant address, it cannot be in
1059 a temporary slot, but it can contain something whose address was
1061 if (p == 0 && (!MEM_P (x) || CONSTANT_P (XEXP (x, 0))))
1063 for (p = *temp_slots_at_level (temp_slot_level); p; p = next)
1068 move_slot_to_level (p, temp_slot_level - 1);
1074 /* First see if we can find a match. */
1076 p = find_temp_slot_from_address (XEXP (x, 0));
1080 /* Move everything at our level whose address was taken to our new
1081 level in case we used its address. */
1082 struct temp_slot *q;
1084 if (p->level == temp_slot_level)
1086 for (q = *temp_slots_at_level (temp_slot_level); q; q = next)
1090 if (p != q && q->addr_taken)
1091 move_slot_to_level (q, temp_slot_level - 1);
1094 move_slot_to_level (p, temp_slot_level - 1);
1100 /* Otherwise, preserve all non-kept slots at this level. */
1101 for (p = *temp_slots_at_level (temp_slot_level); p; p = next)
1106 move_slot_to_level (p, temp_slot_level - 1);
1110 /* Free all temporaries used so far. This is normally called at the
1111 end of generating code for a statement. */
1114 free_temp_slots (void)
1116 struct temp_slot *p, *next;
1118 for (p = *temp_slots_at_level (temp_slot_level); p; p = next)
1123 make_slot_available (p);
1126 combine_temp_slots ();
1129 /* Push deeper into the nesting level for stack temporaries. */
1132 push_temp_slots (void)
1137 /* Pop a temporary nesting level. All slots in use in the current level
1141 pop_temp_slots (void)
1143 struct temp_slot *p, *next;
1145 for (p = *temp_slots_at_level (temp_slot_level); p; p = next)
1148 make_slot_available (p);
1151 combine_temp_slots ();
1156 /* Initialize temporary slots. */
1159 init_temp_slots (void)
1161 /* We have not allocated any temporaries yet. */
1162 avail_temp_slots = 0;
1163 used_temp_slots = 0;
1164 temp_slot_level = 0;
1167 /* These routines are responsible for converting virtual register references
1168 to the actual hard register references once RTL generation is complete.
1170 The following four variables are used for communication between the
1171 routines. They contain the offsets of the virtual registers from their
1172 respective hard registers. */
1174 static int in_arg_offset;
1175 static int var_offset;
1176 static int dynamic_offset;
1177 static int out_arg_offset;
1178 static int cfa_offset;
1180 /* In most machines, the stack pointer register is equivalent to the bottom
1183 #ifndef STACK_POINTER_OFFSET
1184 #define STACK_POINTER_OFFSET 0
1187 /* If not defined, pick an appropriate default for the offset of dynamically
1188 allocated memory depending on the value of ACCUMULATE_OUTGOING_ARGS,
1189 REG_PARM_STACK_SPACE, and OUTGOING_REG_PARM_STACK_SPACE. */
1191 #ifndef STACK_DYNAMIC_OFFSET
1193 /* The bottom of the stack points to the actual arguments. If
1194 REG_PARM_STACK_SPACE is defined, this includes the space for the register
1195 parameters. However, if OUTGOING_REG_PARM_STACK space is not defined,
1196 stack space for register parameters is not pushed by the caller, but
1197 rather part of the fixed stack areas and hence not included in
1198 `current_function_outgoing_args_size'. Nevertheless, we must allow
1199 for it when allocating stack dynamic objects. */
1201 #if defined(REG_PARM_STACK_SPACE) && ! defined(OUTGOING_REG_PARM_STACK_SPACE)
1202 #define STACK_DYNAMIC_OFFSET(FNDECL) \
1203 ((ACCUMULATE_OUTGOING_ARGS \
1204 ? (current_function_outgoing_args_size + REG_PARM_STACK_SPACE (FNDECL)) : 0)\
1205 + (STACK_POINTER_OFFSET)) \
1208 #define STACK_DYNAMIC_OFFSET(FNDECL) \
1209 ((ACCUMULATE_OUTGOING_ARGS ? current_function_outgoing_args_size : 0) \
1210 + (STACK_POINTER_OFFSET))
1215 /* Given a piece of RTX and a pointer to a HOST_WIDE_INT, if the RTX
1216 is a virtual register, return the equivalent hard register and set the
1217 offset indirectly through the pointer. Otherwise, return 0. */
1220 instantiate_new_reg (rtx x, HOST_WIDE_INT *poffset)
1223 HOST_WIDE_INT offset;
1225 if (x == virtual_incoming_args_rtx)
1226 new = arg_pointer_rtx, offset = in_arg_offset;
1227 else if (x == virtual_stack_vars_rtx)
1228 new = frame_pointer_rtx, offset = var_offset;
1229 else if (x == virtual_stack_dynamic_rtx)
1230 new = stack_pointer_rtx, offset = dynamic_offset;
1231 else if (x == virtual_outgoing_args_rtx)
1232 new = stack_pointer_rtx, offset = out_arg_offset;
1233 else if (x == virtual_cfa_rtx)
1234 new = arg_pointer_rtx, offset = cfa_offset;
1242 /* A subroutine of instantiate_virtual_regs, called via for_each_rtx.
1243 Instantiate any virtual registers present inside of *LOC. The expression
1244 is simplified, as much as possible, but is not to be considered "valid"
1245 in any sense implied by the target. If any change is made, set CHANGED
1249 instantiate_virtual_regs_in_rtx (rtx *loc, void *data)
1251 HOST_WIDE_INT offset;
1252 bool *changed = (bool *) data;
1259 switch (GET_CODE (x))
1262 new = instantiate_new_reg (x, &offset);
1265 *loc = plus_constant (new, offset);
1272 new = instantiate_new_reg (XEXP (x, 0), &offset);
1275 new = plus_constant (new, offset);
1276 *loc = simplify_gen_binary (PLUS, GET_MODE (x), new, XEXP (x, 1));
1282 /* FIXME -- from old code */
1283 /* If we have (plus (subreg (virtual-reg)) (const_int)), we know
1284 we can commute the PLUS and SUBREG because pointers into the
1285 frame are well-behaved. */
1295 /* A subroutine of instantiate_virtual_regs_in_insn. Return true if X
1296 matches the predicate for insn CODE operand OPERAND. */
1299 safe_insn_predicate (int code, int operand, rtx x)
1301 const struct insn_operand_data *op_data;
1306 op_data = &insn_data[code].operand[operand];
1307 if (op_data->predicate == NULL)
1310 return op_data->predicate (x, op_data->mode);
1313 /* A subroutine of instantiate_virtual_regs. Instantiate any virtual
1314 registers present inside of insn. The result will be a valid insn. */
1317 instantiate_virtual_regs_in_insn (rtx insn)
1319 HOST_WIDE_INT offset;
1321 bool any_change = false;
1322 rtx set, new, x, seq;
1324 /* There are some special cases to be handled first. */
1325 set = single_set (insn);
1328 /* We're allowed to assign to a virtual register. This is interpreted
1329 to mean that the underlying register gets assigned the inverse
1330 transformation. This is used, for example, in the handling of
1332 new = instantiate_new_reg (SET_DEST (set), &offset);
1337 for_each_rtx (&SET_SRC (set), instantiate_virtual_regs_in_rtx, NULL);
1338 x = simplify_gen_binary (PLUS, GET_MODE (new), SET_SRC (set),
1340 x = force_operand (x, new);
1342 emit_move_insn (new, x);
1347 emit_insn_before (seq, insn);
1352 /* Handle a straight copy from a virtual register by generating a
1353 new add insn. The difference between this and falling through
1354 to the generic case is avoiding a new pseudo and eliminating a
1355 move insn in the initial rtl stream. */
1356 new = instantiate_new_reg (SET_SRC (set), &offset);
1357 if (new && offset != 0
1358 && REG_P (SET_DEST (set))
1359 && REGNO (SET_DEST (set)) > LAST_VIRTUAL_REGISTER)
1363 x = expand_simple_binop (GET_MODE (SET_DEST (set)), PLUS,
1364 new, GEN_INT (offset), SET_DEST (set),
1365 1, OPTAB_LIB_WIDEN);
1366 if (x != SET_DEST (set))
1367 emit_move_insn (SET_DEST (set), x);
1372 emit_insn_before (seq, insn);
1377 extract_insn (insn);
1378 insn_code = INSN_CODE (insn);
1380 /* Handle a plus involving a virtual register by determining if the
1381 operands remain valid if they're modified in place. */
1382 if (GET_CODE (SET_SRC (set)) == PLUS
1383 && recog_data.n_operands >= 3
1384 && recog_data.operand_loc[1] == &XEXP (SET_SRC (set), 0)
1385 && recog_data.operand_loc[2] == &XEXP (SET_SRC (set), 1)
1386 && GET_CODE (recog_data.operand[2]) == CONST_INT
1387 && (new = instantiate_new_reg (recog_data.operand[1], &offset)))
1389 offset += INTVAL (recog_data.operand[2]);
1391 /* If the sum is zero, then replace with a plain move. */
1393 && REG_P (SET_DEST (set))
1394 && REGNO (SET_DEST (set)) > LAST_VIRTUAL_REGISTER)
1397 emit_move_insn (SET_DEST (set), new);
1401 emit_insn_before (seq, insn);
1406 x = gen_int_mode (offset, recog_data.operand_mode[2]);
1408 /* Using validate_change and apply_change_group here leaves
1409 recog_data in an invalid state. Since we know exactly what
1410 we want to check, do those two by hand. */
1411 if (safe_insn_predicate (insn_code, 1, new)
1412 && safe_insn_predicate (insn_code, 2, x))
1414 *recog_data.operand_loc[1] = recog_data.operand[1] = new;
1415 *recog_data.operand_loc[2] = recog_data.operand[2] = x;
1418 /* Fall through into the regular operand fixup loop in
1419 order to take care of operands other than 1 and 2. */
1425 extract_insn (insn);
1426 insn_code = INSN_CODE (insn);
1429 /* In the general case, we expect virtual registers to appear only in
1430 operands, and then only as either bare registers or inside memories. */
1431 for (i = 0; i < recog_data.n_operands; ++i)
1433 x = recog_data.operand[i];
1434 switch (GET_CODE (x))
1438 rtx addr = XEXP (x, 0);
1439 bool changed = false;
1441 for_each_rtx (&addr, instantiate_virtual_regs_in_rtx, &changed);
1446 x = replace_equiv_address (x, addr);
1450 emit_insn_before (seq, insn);
1455 new = instantiate_new_reg (x, &offset);
1464 /* Careful, special mode predicates may have stuff in
1465 insn_data[insn_code].operand[i].mode that isn't useful
1466 to us for computing a new value. */
1467 /* ??? Recognize address_operand and/or "p" constraints
1468 to see if (plus new offset) is a valid before we put
1469 this through expand_simple_binop. */
1470 x = expand_simple_binop (GET_MODE (x), PLUS, new,
1471 GEN_INT (offset), NULL_RTX,
1472 1, OPTAB_LIB_WIDEN);
1475 emit_insn_before (seq, insn);
1480 new = instantiate_new_reg (SUBREG_REG (x), &offset);
1486 new = expand_simple_binop (GET_MODE (new), PLUS, new,
1487 GEN_INT (offset), NULL_RTX,
1488 1, OPTAB_LIB_WIDEN);
1491 emit_insn_before (seq, insn);
1493 x = simplify_gen_subreg (recog_data.operand_mode[i], new,
1494 GET_MODE (new), SUBREG_BYTE (x));
1501 /* At this point, X contains the new value for the operand.
1502 Validate the new value vs the insn predicate. Note that
1503 asm insns will have insn_code -1 here. */
1504 if (!safe_insn_predicate (insn_code, i, x))
1505 x = force_reg (insn_data[insn_code].operand[i].mode, x);
1507 *recog_data.operand_loc[i] = recog_data.operand[i] = x;
1513 /* Propagate operand changes into the duplicates. */
1514 for (i = 0; i < recog_data.n_dups; ++i)
1515 *recog_data.dup_loc[i]
1516 = recog_data.operand[(unsigned)recog_data.dup_num[i]];
1518 /* Force re-recognition of the instruction for validation. */
1519 INSN_CODE (insn) = -1;
1522 if (asm_noperands (PATTERN (insn)) >= 0)
1524 if (!check_asm_operands (PATTERN (insn)))
1526 error_for_asm (insn, "impossible constraint in %<asm%>");
1532 if (recog_memoized (insn) < 0)
1533 fatal_insn_not_found (insn);
1537 /* Subroutine of instantiate_decls. Given RTL representing a decl,
1538 do any instantiation required. */
1541 instantiate_decl (rtx x)
1548 /* If this is a CONCAT, recurse for the pieces. */
1549 if (GET_CODE (x) == CONCAT)
1551 instantiate_decl (XEXP (x, 0));
1552 instantiate_decl (XEXP (x, 1));
1556 /* If this is not a MEM, no need to do anything. Similarly if the
1557 address is a constant or a register that is not a virtual register. */
1562 if (CONSTANT_P (addr)
1564 && (REGNO (addr) < FIRST_VIRTUAL_REGISTER
1565 || REGNO (addr) > LAST_VIRTUAL_REGISTER)))
1568 for_each_rtx (&XEXP (x, 0), instantiate_virtual_regs_in_rtx, NULL);
1571 /* Subroutine of instantiate_decls: Process all decls in the given
1572 BLOCK node and all its subblocks. */
1575 instantiate_decls_1 (tree let)
1579 for (t = BLOCK_VARS (let); t; t = TREE_CHAIN (t))
1580 if (DECL_RTL_SET_P (t))
1581 instantiate_decl (DECL_RTL (t));
1583 /* Process all subblocks. */
1584 for (t = BLOCK_SUBBLOCKS (let); t; t = TREE_CHAIN (t))
1585 instantiate_decls_1 (t);
1588 /* Scan all decls in FNDECL (both variables and parameters) and instantiate
1589 all virtual registers in their DECL_RTL's. */
1592 instantiate_decls (tree fndecl)
1596 /* Process all parameters of the function. */
1597 for (decl = DECL_ARGUMENTS (fndecl); decl; decl = TREE_CHAIN (decl))
1599 instantiate_decl (DECL_RTL (decl));
1600 instantiate_decl (DECL_INCOMING_RTL (decl));
1603 /* Now process all variables defined in the function or its subblocks. */
1604 instantiate_decls_1 (DECL_INITIAL (fndecl));
1607 /* Pass through the INSNS of function FNDECL and convert virtual register
1608 references to hard register references. */
1611 instantiate_virtual_regs (void)
1615 /* Compute the offsets to use for this function. */
1616 in_arg_offset = FIRST_PARM_OFFSET (current_function_decl);
1617 var_offset = STARTING_FRAME_OFFSET;
1618 dynamic_offset = STACK_DYNAMIC_OFFSET (current_function_decl);
1619 out_arg_offset = STACK_POINTER_OFFSET;
1620 cfa_offset = ARG_POINTER_CFA_OFFSET (current_function_decl);
1622 /* Initialize recognition, indicating that volatile is OK. */
1625 /* Scan through all the insns, instantiating every virtual register still
1627 for (insn = get_insns (); insn; insn = NEXT_INSN (insn))
1630 /* These patterns in the instruction stream can never be recognized.
1631 Fortunately, they shouldn't contain virtual registers either. */
1632 if (GET_CODE (PATTERN (insn)) == USE
1633 || GET_CODE (PATTERN (insn)) == CLOBBER
1634 || GET_CODE (PATTERN (insn)) == ADDR_VEC
1635 || GET_CODE (PATTERN (insn)) == ADDR_DIFF_VEC
1636 || GET_CODE (PATTERN (insn)) == ASM_INPUT)
1639 instantiate_virtual_regs_in_insn (insn);
1641 if (INSN_DELETED_P (insn))
1644 for_each_rtx (®_NOTES (insn), instantiate_virtual_regs_in_rtx, NULL);
1646 /* Instantiate any virtual registers in CALL_INSN_FUNCTION_USAGE. */
1647 if (GET_CODE (insn) == CALL_INSN)
1648 for_each_rtx (&CALL_INSN_FUNCTION_USAGE (insn),
1649 instantiate_virtual_regs_in_rtx, NULL);
1652 /* Instantiate the virtual registers in the DECLs for debugging purposes. */
1653 instantiate_decls (current_function_decl);
1655 /* Indicate that, from now on, assign_stack_local should use
1656 frame_pointer_rtx. */
1657 virtuals_instantiated = 1;
1660 struct tree_opt_pass pass_instantiate_virtual_regs =
1664 instantiate_virtual_regs, /* execute */
1667 0, /* static_pass_number */
1669 0, /* properties_required */
1670 0, /* properties_provided */
1671 0, /* properties_destroyed */
1672 0, /* todo_flags_start */
1673 TODO_dump_func, /* todo_flags_finish */
1678 /* Return 1 if EXP is an aggregate type (or a value with aggregate type).
1679 This means a type for which function calls must pass an address to the
1680 function or get an address back from the function.
1681 EXP may be a type node or an expression (whose type is tested). */
1684 aggregate_value_p (tree exp, tree fntype)
1686 int i, regno, nregs;
1689 tree type = (TYPE_P (exp)) ? exp : TREE_TYPE (exp);
1692 switch (TREE_CODE (fntype))
1695 fntype = get_callee_fndecl (fntype);
1696 fntype = fntype ? TREE_TYPE (fntype) : 0;
1699 fntype = TREE_TYPE (fntype);
1704 case IDENTIFIER_NODE:
1708 /* We don't expect other rtl types here. */
1712 if (TREE_CODE (type) == VOID_TYPE)
1714 /* If the front end has decided that this needs to be passed by
1715 reference, do so. */
1716 if ((TREE_CODE (exp) == PARM_DECL || TREE_CODE (exp) == RESULT_DECL)
1717 && DECL_BY_REFERENCE (exp))
1719 if (targetm.calls.return_in_memory (type, fntype))
1721 /* Types that are TREE_ADDRESSABLE must be constructed in memory,
1722 and thus can't be returned in registers. */
1723 if (TREE_ADDRESSABLE (type))
1725 if (flag_pcc_struct_return && AGGREGATE_TYPE_P (type))
1727 /* Make sure we have suitable call-clobbered regs to return
1728 the value in; if not, we must return it in memory. */
1729 reg = hard_function_value (type, 0, fntype, 0);
1731 /* If we have something other than a REG (e.g. a PARALLEL), then assume
1736 regno = REGNO (reg);
1737 nregs = hard_regno_nregs[regno][TYPE_MODE (type)];
1738 for (i = 0; i < nregs; i++)
1739 if (! call_used_regs[regno + i])
1744 /* Return true if we should assign DECL a pseudo register; false if it
1745 should live on the local stack. */
1748 use_register_for_decl (tree decl)
1750 /* Honor volatile. */
1751 if (TREE_SIDE_EFFECTS (decl))
1754 /* Honor addressability. */
1755 if (TREE_ADDRESSABLE (decl))
1758 /* Only register-like things go in registers. */
1759 if (DECL_MODE (decl) == BLKmode)
1762 /* If -ffloat-store specified, don't put explicit float variables
1764 /* ??? This should be checked after DECL_ARTIFICIAL, but tree-ssa
1765 propagates values across these stores, and it probably shouldn't. */
1766 if (flag_float_store && FLOAT_TYPE_P (TREE_TYPE (decl)))
1769 /* If we're not interested in tracking debugging information for
1770 this decl, then we can certainly put it in a register. */
1771 if (DECL_IGNORED_P (decl))
1774 return (optimize || DECL_REGISTER (decl));
1777 /* Return true if TYPE should be passed by invisible reference. */
1780 pass_by_reference (CUMULATIVE_ARGS *ca, enum machine_mode mode,
1781 tree type, bool named_arg)
1785 /* If this type contains non-trivial constructors, then it is
1786 forbidden for the middle-end to create any new copies. */
1787 if (TREE_ADDRESSABLE (type))
1790 /* GCC post 3.4 passes *all* variable sized types by reference. */
1791 if (!TYPE_SIZE (type) || TREE_CODE (TYPE_SIZE (type)) != INTEGER_CST)
1795 return targetm.calls.pass_by_reference (ca, mode, type, named_arg);
1798 /* Return true if TYPE, which is passed by reference, should be callee
1799 copied instead of caller copied. */
1802 reference_callee_copied (CUMULATIVE_ARGS *ca, enum machine_mode mode,
1803 tree type, bool named_arg)
1805 if (type && TREE_ADDRESSABLE (type))
1807 return targetm.calls.callee_copies (ca, mode, type, named_arg);
1810 /* Structures to communicate between the subroutines of assign_parms.
1811 The first holds data persistent across all parameters, the second
1812 is cleared out for each parameter. */
1814 struct assign_parm_data_all
1816 CUMULATIVE_ARGS args_so_far;
1817 struct args_size stack_args_size;
1818 tree function_result_decl;
1820 rtx conversion_insns;
1821 HOST_WIDE_INT pretend_args_size;
1822 HOST_WIDE_INT extra_pretend_bytes;
1823 int reg_parm_stack_space;
1826 struct assign_parm_data_one
1832 enum machine_mode nominal_mode;
1833 enum machine_mode passed_mode;
1834 enum machine_mode promoted_mode;
1835 struct locate_and_pad_arg_data locate;
1837 BOOL_BITFIELD named_arg : 1;
1838 BOOL_BITFIELD passed_pointer : 1;
1839 BOOL_BITFIELD on_stack : 1;
1840 BOOL_BITFIELD loaded_in_reg : 1;
1843 /* A subroutine of assign_parms. Initialize ALL. */
1846 assign_parms_initialize_all (struct assign_parm_data_all *all)
1850 memset (all, 0, sizeof (*all));
1852 fntype = TREE_TYPE (current_function_decl);
1854 #ifdef INIT_CUMULATIVE_INCOMING_ARGS
1855 INIT_CUMULATIVE_INCOMING_ARGS (all->args_so_far, fntype, NULL_RTX);
1857 INIT_CUMULATIVE_ARGS (all->args_so_far, fntype, NULL_RTX,
1858 current_function_decl, -1);
1861 #ifdef REG_PARM_STACK_SPACE
1862 all->reg_parm_stack_space = REG_PARM_STACK_SPACE (current_function_decl);
1866 /* If ARGS contains entries with complex types, split the entry into two
1867 entries of the component type. Return a new list of substitutions are
1868 needed, else the old list. */
1871 split_complex_args (tree args)
1875 /* Before allocating memory, check for the common case of no complex. */
1876 for (p = args; p; p = TREE_CHAIN (p))
1878 tree type = TREE_TYPE (p);
1879 if (TREE_CODE (type) == COMPLEX_TYPE
1880 && targetm.calls.split_complex_arg (type))
1886 args = copy_list (args);
1888 for (p = args; p; p = TREE_CHAIN (p))
1890 tree type = TREE_TYPE (p);
1891 if (TREE_CODE (type) == COMPLEX_TYPE
1892 && targetm.calls.split_complex_arg (type))
1895 tree subtype = TREE_TYPE (type);
1896 bool addressable = TREE_ADDRESSABLE (p);
1898 /* Rewrite the PARM_DECL's type with its component. */
1899 TREE_TYPE (p) = subtype;
1900 DECL_ARG_TYPE (p) = TREE_TYPE (DECL_ARG_TYPE (p));
1901 DECL_MODE (p) = VOIDmode;
1902 DECL_SIZE (p) = NULL;
1903 DECL_SIZE_UNIT (p) = NULL;
1904 /* If this arg must go in memory, put it in a pseudo here.
1905 We can't allow it to go in memory as per normal parms,
1906 because the usual place might not have the imag part
1907 adjacent to the real part. */
1908 DECL_ARTIFICIAL (p) = addressable;
1909 DECL_IGNORED_P (p) = addressable;
1910 TREE_ADDRESSABLE (p) = 0;
1913 /* Build a second synthetic decl. */
1914 decl = build_decl (PARM_DECL, NULL_TREE, subtype);
1915 DECL_ARG_TYPE (decl) = DECL_ARG_TYPE (p);
1916 DECL_ARTIFICIAL (decl) = addressable;
1917 DECL_IGNORED_P (decl) = addressable;
1918 layout_decl (decl, 0);
1920 /* Splice it in; skip the new decl. */
1921 TREE_CHAIN (decl) = TREE_CHAIN (p);
1922 TREE_CHAIN (p) = decl;
1930 /* A subroutine of assign_parms. Adjust the parameter list to incorporate
1931 the hidden struct return argument, and (abi willing) complex args.
1932 Return the new parameter list. */
1935 assign_parms_augmented_arg_list (struct assign_parm_data_all *all)
1937 tree fndecl = current_function_decl;
1938 tree fntype = TREE_TYPE (fndecl);
1939 tree fnargs = DECL_ARGUMENTS (fndecl);
1941 /* If struct value address is treated as the first argument, make it so. */
1942 if (aggregate_value_p (DECL_RESULT (fndecl), fndecl)
1943 && ! current_function_returns_pcc_struct
1944 && targetm.calls.struct_value_rtx (TREE_TYPE (fndecl), 1) == 0)
1946 tree type = build_pointer_type (TREE_TYPE (fntype));
1949 decl = build_decl (PARM_DECL, NULL_TREE, type);
1950 DECL_ARG_TYPE (decl) = type;
1951 DECL_ARTIFICIAL (decl) = 1;
1952 DECL_IGNORED_P (decl) = 1;
1954 TREE_CHAIN (decl) = fnargs;
1956 all->function_result_decl = decl;
1959 all->orig_fnargs = fnargs;
1961 /* If the target wants to split complex arguments into scalars, do so. */
1962 if (targetm.calls.split_complex_arg)
1963 fnargs = split_complex_args (fnargs);
1968 /* A subroutine of assign_parms. Examine PARM and pull out type and mode
1969 data for the parameter. Incorporate ABI specifics such as pass-by-
1970 reference and type promotion. */
1973 assign_parm_find_data_types (struct assign_parm_data_all *all, tree parm,
1974 struct assign_parm_data_one *data)
1976 tree nominal_type, passed_type;
1977 enum machine_mode nominal_mode, passed_mode, promoted_mode;
1979 memset (data, 0, sizeof (*data));
1981 /* NAMED_ARG is a mis-nomer. We really mean 'non-varadic'. */
1982 if (!current_function_stdarg)
1983 data->named_arg = 1; /* No varadic parms. */
1984 else if (TREE_CHAIN (parm))
1985 data->named_arg = 1; /* Not the last non-varadic parm. */
1986 else if (targetm.calls.strict_argument_naming (&all->args_so_far))
1987 data->named_arg = 1; /* Only varadic ones are unnamed. */
1989 data->named_arg = 0; /* Treat as varadic. */
1991 nominal_type = TREE_TYPE (parm);
1992 passed_type = DECL_ARG_TYPE (parm);
1994 /* Look out for errors propagating this far. Also, if the parameter's
1995 type is void then its value doesn't matter. */
1996 if (TREE_TYPE (parm) == error_mark_node
1997 /* This can happen after weird syntax errors
1998 or if an enum type is defined among the parms. */
1999 || TREE_CODE (parm) != PARM_DECL
2000 || passed_type == NULL
2001 || VOID_TYPE_P (nominal_type))
2003 nominal_type = passed_type = void_type_node;
2004 nominal_mode = passed_mode = promoted_mode = VOIDmode;
2008 /* Find mode of arg as it is passed, and mode of arg as it should be
2009 during execution of this function. */
2010 passed_mode = TYPE_MODE (passed_type);
2011 nominal_mode = TYPE_MODE (nominal_type);
2013 /* If the parm is to be passed as a transparent union, use the type of
2014 the first field for the tests below. We have already verified that
2015 the modes are the same. */
2016 if (TREE_CODE (passed_type) == UNION_TYPE
2017 && TYPE_TRANSPARENT_UNION (passed_type))
2018 passed_type = TREE_TYPE (TYPE_FIELDS (passed_type));
2020 /* See if this arg was passed by invisible reference. */
2021 if (pass_by_reference (&all->args_so_far, passed_mode,
2022 passed_type, data->named_arg))
2024 passed_type = nominal_type = build_pointer_type (passed_type);
2025 data->passed_pointer = true;
2026 passed_mode = nominal_mode = Pmode;
2029 /* Find mode as it is passed by the ABI. */
2030 promoted_mode = passed_mode;
2031 if (targetm.calls.promote_function_args (TREE_TYPE (current_function_decl)))
2033 int unsignedp = TYPE_UNSIGNED (passed_type);
2034 promoted_mode = promote_mode (passed_type, promoted_mode,
2039 data->nominal_type = nominal_type;
2040 data->passed_type = passed_type;
2041 data->nominal_mode = nominal_mode;
2042 data->passed_mode = passed_mode;
2043 data->promoted_mode = promoted_mode;
2046 /* A subroutine of assign_parms. Invoke setup_incoming_varargs. */
2049 assign_parms_setup_varargs (struct assign_parm_data_all *all,
2050 struct assign_parm_data_one *data, bool no_rtl)
2052 int varargs_pretend_bytes = 0;
2054 targetm.calls.setup_incoming_varargs (&all->args_so_far,
2055 data->promoted_mode,
2057 &varargs_pretend_bytes, no_rtl);
2059 /* If the back-end has requested extra stack space, record how much is
2060 needed. Do not change pretend_args_size otherwise since it may be
2061 nonzero from an earlier partial argument. */
2062 if (varargs_pretend_bytes > 0)
2063 all->pretend_args_size = varargs_pretend_bytes;
2066 /* A subroutine of assign_parms. Set DATA->ENTRY_PARM corresponding to
2067 the incoming location of the current parameter. */
2070 assign_parm_find_entry_rtl (struct assign_parm_data_all *all,
2071 struct assign_parm_data_one *data)
2073 HOST_WIDE_INT pretend_bytes = 0;
2077 if (data->promoted_mode == VOIDmode)
2079 data->entry_parm = data->stack_parm = const0_rtx;
2083 #ifdef FUNCTION_INCOMING_ARG
2084 entry_parm = FUNCTION_INCOMING_ARG (all->args_so_far, data->promoted_mode,
2085 data->passed_type, data->named_arg);
2087 entry_parm = FUNCTION_ARG (all->args_so_far, data->promoted_mode,
2088 data->passed_type, data->named_arg);
2091 if (entry_parm == 0)
2092 data->promoted_mode = data->passed_mode;
2094 /* Determine parm's home in the stack, in case it arrives in the stack
2095 or we should pretend it did. Compute the stack position and rtx where
2096 the argument arrives and its size.
2098 There is one complexity here: If this was a parameter that would
2099 have been passed in registers, but wasn't only because it is
2100 __builtin_va_alist, we want locate_and_pad_parm to treat it as if
2101 it came in a register so that REG_PARM_STACK_SPACE isn't skipped.
2102 In this case, we call FUNCTION_ARG with NAMED set to 1 instead of 0
2103 as it was the previous time. */
2104 in_regs = entry_parm != 0;
2105 #ifdef STACK_PARMS_IN_REG_PARM_AREA
2108 if (!in_regs && !data->named_arg)
2110 if (targetm.calls.pretend_outgoing_varargs_named (&all->args_so_far))
2113 #ifdef FUNCTION_INCOMING_ARG
2114 tem = FUNCTION_INCOMING_ARG (all->args_so_far, data->promoted_mode,
2115 data->passed_type, true);
2117 tem = FUNCTION_ARG (all->args_so_far, data->promoted_mode,
2118 data->passed_type, true);
2120 in_regs = tem != NULL;
2124 /* If this parameter was passed both in registers and in the stack, use
2125 the copy on the stack. */
2126 if (targetm.calls.must_pass_in_stack (data->promoted_mode,
2134 partial = targetm.calls.arg_partial_bytes (&all->args_so_far,
2135 data->promoted_mode,
2138 data->partial = partial;
2140 /* The caller might already have allocated stack space for the
2141 register parameters. */
2142 if (partial != 0 && all->reg_parm_stack_space == 0)
2144 /* Part of this argument is passed in registers and part
2145 is passed on the stack. Ask the prologue code to extend
2146 the stack part so that we can recreate the full value.
2148 PRETEND_BYTES is the size of the registers we need to store.
2149 CURRENT_FUNCTION_PRETEND_ARGS_SIZE is the amount of extra
2150 stack space that the prologue should allocate.
2152 Internally, gcc assumes that the argument pointer is aligned
2153 to STACK_BOUNDARY bits. This is used both for alignment
2154 optimizations (see init_emit) and to locate arguments that are
2155 aligned to more than PARM_BOUNDARY bits. We must preserve this
2156 invariant by rounding CURRENT_FUNCTION_PRETEND_ARGS_SIZE up to
2157 a stack boundary. */
2159 /* We assume at most one partial arg, and it must be the first
2160 argument on the stack. */
2161 gcc_assert (!all->extra_pretend_bytes && !all->pretend_args_size);
2163 pretend_bytes = partial;
2164 all->pretend_args_size = CEIL_ROUND (pretend_bytes, STACK_BYTES);
2166 /* We want to align relative to the actual stack pointer, so
2167 don't include this in the stack size until later. */
2168 all->extra_pretend_bytes = all->pretend_args_size;
2172 locate_and_pad_parm (data->promoted_mode, data->passed_type, in_regs,
2173 entry_parm ? data->partial : 0, current_function_decl,
2174 &all->stack_args_size, &data->locate);
2176 /* Adjust offsets to include the pretend args. */
2177 pretend_bytes = all->extra_pretend_bytes - pretend_bytes;
2178 data->locate.slot_offset.constant += pretend_bytes;
2179 data->locate.offset.constant += pretend_bytes;
2181 data->entry_parm = entry_parm;
2184 /* A subroutine of assign_parms. If there is actually space on the stack
2185 for this parm, count it in stack_args_size and return true. */
2188 assign_parm_is_stack_parm (struct assign_parm_data_all *all,
2189 struct assign_parm_data_one *data)
2191 /* Trivially true if we've no incoming register. */
2192 if (data->entry_parm == NULL)
2194 /* Also true if we're partially in registers and partially not,
2195 since we've arranged to drop the entire argument on the stack. */
2196 else if (data->partial != 0)
2198 /* Also true if the target says that it's passed in both registers
2199 and on the stack. */
2200 else if (GET_CODE (data->entry_parm) == PARALLEL
2201 && XEXP (XVECEXP (data->entry_parm, 0, 0), 0) == NULL_RTX)
2203 /* Also true if the target says that there's stack allocated for
2204 all register parameters. */
2205 else if (all->reg_parm_stack_space > 0)
2207 /* Otherwise, no, this parameter has no ABI defined stack slot. */
2211 all->stack_args_size.constant += data->locate.size.constant;
2212 if (data->locate.size.var)
2213 ADD_PARM_SIZE (all->stack_args_size, data->locate.size.var);
2218 /* A subroutine of assign_parms. Given that this parameter is allocated
2219 stack space by the ABI, find it. */
2222 assign_parm_find_stack_rtl (tree parm, struct assign_parm_data_one *data)
2224 rtx offset_rtx, stack_parm;
2225 unsigned int align, boundary;
2227 /* If we're passing this arg using a reg, make its stack home the
2228 aligned stack slot. */
2229 if (data->entry_parm)
2230 offset_rtx = ARGS_SIZE_RTX (data->locate.slot_offset);
2232 offset_rtx = ARGS_SIZE_RTX (data->locate.offset);
2234 stack_parm = current_function_internal_arg_pointer;
2235 if (offset_rtx != const0_rtx)
2236 stack_parm = gen_rtx_PLUS (Pmode, stack_parm, offset_rtx);
2237 stack_parm = gen_rtx_MEM (data->promoted_mode, stack_parm);
2239 set_mem_attributes (stack_parm, parm, 1);
2241 boundary = data->locate.boundary;
2242 align = BITS_PER_UNIT;
2244 /* If we're padding upward, we know that the alignment of the slot
2245 is FUNCTION_ARG_BOUNDARY. If we're using slot_offset, we're
2246 intentionally forcing upward padding. Otherwise we have to come
2247 up with a guess at the alignment based on OFFSET_RTX. */
2248 if (data->locate.where_pad != downward || data->entry_parm)
2250 else if (GET_CODE (offset_rtx) == CONST_INT)
2252 align = INTVAL (offset_rtx) * BITS_PER_UNIT | boundary;
2253 align = align & -align;
2255 set_mem_align (stack_parm, align);
2257 if (data->entry_parm)
2258 set_reg_attrs_for_parm (data->entry_parm, stack_parm);
2260 data->stack_parm = stack_parm;
2263 /* A subroutine of assign_parms. Adjust DATA->ENTRY_RTL such that it's
2264 always valid and contiguous. */
2267 assign_parm_adjust_entry_rtl (struct assign_parm_data_one *data)
2269 rtx entry_parm = data->entry_parm;
2270 rtx stack_parm = data->stack_parm;
2272 /* If this parm was passed part in regs and part in memory, pretend it
2273 arrived entirely in memory by pushing the register-part onto the stack.
2274 In the special case of a DImode or DFmode that is split, we could put
2275 it together in a pseudoreg directly, but for now that's not worth
2277 if (data->partial != 0)
2279 /* Handle calls that pass values in multiple non-contiguous
2280 locations. The Irix 6 ABI has examples of this. */
2281 if (GET_CODE (entry_parm) == PARALLEL)
2282 emit_group_store (validize_mem (stack_parm), entry_parm,
2284 int_size_in_bytes (data->passed_type));
2287 gcc_assert (data->partial % UNITS_PER_WORD == 0);
2288 move_block_from_reg (REGNO (entry_parm), validize_mem (stack_parm),
2289 data->partial / UNITS_PER_WORD);
2292 entry_parm = stack_parm;
2295 /* If we didn't decide this parm came in a register, by default it came
2297 else if (entry_parm == NULL)
2298 entry_parm = stack_parm;
2300 /* When an argument is passed in multiple locations, we can't make use
2301 of this information, but we can save some copying if the whole argument
2302 is passed in a single register. */
2303 else if (GET_CODE (entry_parm) == PARALLEL
2304 && data->nominal_mode != BLKmode
2305 && data->passed_mode != BLKmode)
2307 size_t i, len = XVECLEN (entry_parm, 0);
2309 for (i = 0; i < len; i++)
2310 if (XEXP (XVECEXP (entry_parm, 0, i), 0) != NULL_RTX
2311 && REG_P (XEXP (XVECEXP (entry_parm, 0, i), 0))
2312 && (GET_MODE (XEXP (XVECEXP (entry_parm, 0, i), 0))
2313 == data->passed_mode)
2314 && INTVAL (XEXP (XVECEXP (entry_parm, 0, i), 1)) == 0)
2316 entry_parm = XEXP (XVECEXP (entry_parm, 0, i), 0);
2321 data->entry_parm = entry_parm;
2324 /* A subroutine of assign_parms. Adjust DATA->STACK_RTL such that it's
2325 always valid and properly aligned. */
2328 assign_parm_adjust_stack_rtl (struct assign_parm_data_one *data)
2330 rtx stack_parm = data->stack_parm;
2332 /* If we can't trust the parm stack slot to be aligned enough for its
2333 ultimate type, don't use that slot after entry. We'll make another
2334 stack slot, if we need one. */
2336 && ((STRICT_ALIGNMENT
2337 && GET_MODE_ALIGNMENT (data->nominal_mode) > MEM_ALIGN (stack_parm))
2338 || (data->nominal_type
2339 && TYPE_ALIGN (data->nominal_type) > MEM_ALIGN (stack_parm)
2340 && MEM_ALIGN (stack_parm) < PREFERRED_STACK_BOUNDARY)))
2343 /* If parm was passed in memory, and we need to convert it on entry,
2344 don't store it back in that same slot. */
2345 else if (data->entry_parm == stack_parm
2346 && data->nominal_mode != BLKmode
2347 && data->nominal_mode != data->passed_mode)
2350 /* If stack protection is in effect for this function, don't leave any
2351 pointers in their passed stack slots. */
2352 else if (cfun->stack_protect_guard
2353 && (flag_stack_protect == 2
2354 || data->passed_pointer
2355 || POINTER_TYPE_P (data->nominal_type)))
2358 data->stack_parm = stack_parm;
2361 /* A subroutine of assign_parms. Return true if the current parameter
2362 should be stored as a BLKmode in the current frame. */
2365 assign_parm_setup_block_p (struct assign_parm_data_one *data)
2367 if (data->nominal_mode == BLKmode)
2369 if (GET_CODE (data->entry_parm) == PARALLEL)
2372 #ifdef BLOCK_REG_PADDING
2373 /* Only assign_parm_setup_block knows how to deal with register arguments
2374 that are padded at the least significant end. */
2375 if (REG_P (data->entry_parm)
2376 && GET_MODE_SIZE (data->promoted_mode) < UNITS_PER_WORD
2377 && (BLOCK_REG_PADDING (data->passed_mode, data->passed_type, 1)
2378 == (BYTES_BIG_ENDIAN ? upward : downward)))
2385 /* A subroutine of assign_parms. Arrange for the parameter to be
2386 present and valid in DATA->STACK_RTL. */
2389 assign_parm_setup_block (struct assign_parm_data_all *all,
2390 tree parm, struct assign_parm_data_one *data)
2392 rtx entry_parm = data->entry_parm;
2393 rtx stack_parm = data->stack_parm;
2395 HOST_WIDE_INT size_stored;
2396 rtx orig_entry_parm = entry_parm;
2398 if (GET_CODE (entry_parm) == PARALLEL)
2399 entry_parm = emit_group_move_into_temps (entry_parm);
2401 /* If we've a non-block object that's nevertheless passed in parts,
2402 reconstitute it in register operations rather than on the stack. */
2403 if (GET_CODE (entry_parm) == PARALLEL
2404 && data->nominal_mode != BLKmode)
2406 rtx elt0 = XEXP (XVECEXP (orig_entry_parm, 0, 0), 0);
2408 if ((XVECLEN (entry_parm, 0) > 1
2409 || hard_regno_nregs[REGNO (elt0)][GET_MODE (elt0)] > 1)
2410 && use_register_for_decl (parm))
2412 rtx parmreg = gen_reg_rtx (data->nominal_mode);
2414 push_to_sequence (all->conversion_insns);
2416 /* For values returned in multiple registers, handle possible
2417 incompatible calls to emit_group_store.
2419 For example, the following would be invalid, and would have to
2420 be fixed by the conditional below:
2422 emit_group_store ((reg:SF), (parallel:DF))
2423 emit_group_store ((reg:SI), (parallel:DI))
2425 An example of this are doubles in e500 v2:
2426 (parallel:DF (expr_list (reg:SI) (const_int 0))
2427 (expr_list (reg:SI) (const_int 4))). */
2428 if (data->nominal_mode != data->passed_mode)
2430 rtx t = gen_reg_rtx (GET_MODE (entry_parm));
2431 emit_group_store (t, entry_parm, NULL_TREE,
2432 GET_MODE_SIZE (GET_MODE (entry_parm)));
2433 convert_move (parmreg, t, 0);
2436 emit_group_store (parmreg, entry_parm, data->nominal_type,
2437 int_size_in_bytes (data->nominal_type));
2439 all->conversion_insns = get_insns ();
2442 SET_DECL_RTL (parm, parmreg);
2447 size = int_size_in_bytes (data->passed_type);
2448 size_stored = CEIL_ROUND (size, UNITS_PER_WORD);
2449 if (stack_parm == 0)
2451 DECL_ALIGN (parm) = MAX (DECL_ALIGN (parm), BITS_PER_WORD);
2452 stack_parm = assign_stack_local (BLKmode, size_stored,
2454 if (GET_MODE_SIZE (GET_MODE (entry_parm)) == size)
2455 PUT_MODE (stack_parm, GET_MODE (entry_parm));
2456 set_mem_attributes (stack_parm, parm, 1);
2459 /* If a BLKmode arrives in registers, copy it to a stack slot. Handle
2460 calls that pass values in multiple non-contiguous locations. */
2461 if (REG_P (entry_parm) || GET_CODE (entry_parm) == PARALLEL)
2465 /* Note that we will be storing an integral number of words.
2466 So we have to be careful to ensure that we allocate an
2467 integral number of words. We do this above when we call
2468 assign_stack_local if space was not allocated in the argument
2469 list. If it was, this will not work if PARM_BOUNDARY is not
2470 a multiple of BITS_PER_WORD. It isn't clear how to fix this
2471 if it becomes a problem. Exception is when BLKmode arrives
2472 with arguments not conforming to word_mode. */
2474 if (data->stack_parm == 0)
2476 else if (GET_CODE (entry_parm) == PARALLEL)
2479 gcc_assert (!size || !(PARM_BOUNDARY % BITS_PER_WORD));
2481 mem = validize_mem (stack_parm);
2483 /* Handle values in multiple non-contiguous locations. */
2484 if (GET_CODE (entry_parm) == PARALLEL)
2486 push_to_sequence (all->conversion_insns);
2487 emit_group_store (mem, entry_parm, data->passed_type, size);
2488 all->conversion_insns = get_insns ();
2495 /* If SIZE is that of a mode no bigger than a word, just use
2496 that mode's store operation. */
2497 else if (size <= UNITS_PER_WORD)
2499 enum machine_mode mode
2500 = mode_for_size (size * BITS_PER_UNIT, MODE_INT, 0);
2503 #ifdef BLOCK_REG_PADDING
2504 && (size == UNITS_PER_WORD
2505 || (BLOCK_REG_PADDING (mode, data->passed_type, 1)
2506 != (BYTES_BIG_ENDIAN ? upward : downward)))
2510 rtx reg = gen_rtx_REG (mode, REGNO (entry_parm));
2511 emit_move_insn (change_address (mem, mode, 0), reg);
2514 /* Blocks smaller than a word on a BYTES_BIG_ENDIAN
2515 machine must be aligned to the left before storing
2516 to memory. Note that the previous test doesn't
2517 handle all cases (e.g. SIZE == 3). */
2518 else if (size != UNITS_PER_WORD
2519 #ifdef BLOCK_REG_PADDING
2520 && (BLOCK_REG_PADDING (mode, data->passed_type, 1)
2528 int by = (UNITS_PER_WORD - size) * BITS_PER_UNIT;
2529 rtx reg = gen_rtx_REG (word_mode, REGNO (entry_parm));
2531 x = expand_shift (LSHIFT_EXPR, word_mode, reg,
2532 build_int_cst (NULL_TREE, by),
2534 tem = change_address (mem, word_mode, 0);
2535 emit_move_insn (tem, x);
2538 move_block_from_reg (REGNO (entry_parm), mem,
2539 size_stored / UNITS_PER_WORD);
2542 move_block_from_reg (REGNO (entry_parm), mem,
2543 size_stored / UNITS_PER_WORD);
2545 else if (data->stack_parm == 0)
2547 push_to_sequence (all->conversion_insns);
2548 emit_block_move (stack_parm, data->entry_parm, GEN_INT (size),
2550 all->conversion_insns = get_insns ();
2554 data->stack_parm = stack_parm;
2555 SET_DECL_RTL (parm, stack_parm);
2558 /* A subroutine of assign_parms. Allocate a pseudo to hold the current
2559 parameter. Get it there. Perform all ABI specified conversions. */
2562 assign_parm_setup_reg (struct assign_parm_data_all *all, tree parm,
2563 struct assign_parm_data_one *data)
2566 enum machine_mode promoted_nominal_mode;
2567 int unsignedp = TYPE_UNSIGNED (TREE_TYPE (parm));
2568 bool did_conversion = false;
2570 /* Store the parm in a pseudoregister during the function, but we may
2571 need to do it in a wider mode. */
2573 promoted_nominal_mode
2574 = promote_mode (data->nominal_type, data->nominal_mode, &unsignedp, 0);
2576 parmreg = gen_reg_rtx (promoted_nominal_mode);
2578 if (!DECL_ARTIFICIAL (parm))
2579 mark_user_reg (parmreg);
2581 /* If this was an item that we received a pointer to,
2582 set DECL_RTL appropriately. */
2583 if (data->passed_pointer)
2585 rtx x = gen_rtx_MEM (TYPE_MODE (TREE_TYPE (data->passed_type)), parmreg);
2586 set_mem_attributes (x, parm, 1);
2587 SET_DECL_RTL (parm, x);
2590 SET_DECL_RTL (parm, parmreg);
2592 /* Copy the value into the register. */
2593 if (data->nominal_mode != data->passed_mode
2594 || promoted_nominal_mode != data->promoted_mode)
2598 /* ENTRY_PARM has been converted to PROMOTED_MODE, its
2599 mode, by the caller. We now have to convert it to
2600 NOMINAL_MODE, if different. However, PARMREG may be in
2601 a different mode than NOMINAL_MODE if it is being stored
2604 If ENTRY_PARM is a hard register, it might be in a register
2605 not valid for operating in its mode (e.g., an odd-numbered
2606 register for a DFmode). In that case, moves are the only
2607 thing valid, so we can't do a convert from there. This
2608 occurs when the calling sequence allow such misaligned
2611 In addition, the conversion may involve a call, which could
2612 clobber parameters which haven't been copied to pseudo
2613 registers yet. Therefore, we must first copy the parm to
2614 a pseudo reg here, and save the conversion until after all
2615 parameters have been moved. */
2617 rtx tempreg = gen_reg_rtx (GET_MODE (data->entry_parm));
2619 emit_move_insn (tempreg, validize_mem (data->entry_parm));
2621 push_to_sequence (all->conversion_insns);
2622 tempreg = convert_to_mode (data->nominal_mode, tempreg, unsignedp);
2624 if (GET_CODE (tempreg) == SUBREG
2625 && GET_MODE (tempreg) == data->nominal_mode
2626 && REG_P (SUBREG_REG (tempreg))
2627 && data->nominal_mode == data->passed_mode
2628 && GET_MODE (SUBREG_REG (tempreg)) == GET_MODE (data->entry_parm)
2629 && GET_MODE_SIZE (GET_MODE (tempreg))
2630 < GET_MODE_SIZE (GET_MODE (data->entry_parm)))
2632 /* The argument is already sign/zero extended, so note it
2634 SUBREG_PROMOTED_VAR_P (tempreg) = 1;
2635 SUBREG_PROMOTED_UNSIGNED_SET (tempreg, unsignedp);
2638 /* TREE_USED gets set erroneously during expand_assignment. */
2639 save_tree_used = TREE_USED (parm);
2640 expand_assignment (parm, make_tree (data->nominal_type, tempreg));
2641 TREE_USED (parm) = save_tree_used;
2642 all->conversion_insns = get_insns ();
2645 did_conversion = true;
2648 emit_move_insn (parmreg, validize_mem (data->entry_parm));
2650 /* If we were passed a pointer but the actual value can safely live
2651 in a register, put it in one. */
2652 if (data->passed_pointer
2653 && TYPE_MODE (TREE_TYPE (parm)) != BLKmode
2654 /* If by-reference argument was promoted, demote it. */
2655 && (TYPE_MODE (TREE_TYPE (parm)) != GET_MODE (DECL_RTL (parm))
2656 || use_register_for_decl (parm)))
2658 /* We can't use nominal_mode, because it will have been set to
2659 Pmode above. We must use the actual mode of the parm. */
2660 parmreg = gen_reg_rtx (TYPE_MODE (TREE_TYPE (parm)));
2661 mark_user_reg (parmreg);
2663 if (GET_MODE (parmreg) != GET_MODE (DECL_RTL (parm)))
2665 rtx tempreg = gen_reg_rtx (GET_MODE (DECL_RTL (parm)));
2666 int unsigned_p = TYPE_UNSIGNED (TREE_TYPE (parm));
2668 push_to_sequence (all->conversion_insns);
2669 emit_move_insn (tempreg, DECL_RTL (parm));
2670 tempreg = convert_to_mode (GET_MODE (parmreg), tempreg, unsigned_p);
2671 emit_move_insn (parmreg, tempreg);
2672 all->conversion_insns = get_insns ();
2675 did_conversion = true;
2678 emit_move_insn (parmreg, DECL_RTL (parm));
2680 SET_DECL_RTL (parm, parmreg);
2682 /* STACK_PARM is the pointer, not the parm, and PARMREG is
2684 data->stack_parm = NULL;
2687 /* Mark the register as eliminable if we did no conversion and it was
2688 copied from memory at a fixed offset, and the arg pointer was not
2689 copied to a pseudo-reg. If the arg pointer is a pseudo reg or the
2690 offset formed an invalid address, such memory-equivalences as we
2691 make here would screw up life analysis for it. */
2692 if (data->nominal_mode == data->passed_mode
2694 && data->stack_parm != 0
2695 && MEM_P (data->stack_parm)
2696 && data->locate.offset.var == 0
2697 && reg_mentioned_p (virtual_incoming_args_rtx,
2698 XEXP (data->stack_parm, 0)))
2700 rtx linsn = get_last_insn ();
2703 /* Mark complex types separately. */
2704 if (GET_CODE (parmreg) == CONCAT)
2706 enum machine_mode submode
2707 = GET_MODE_INNER (GET_MODE (parmreg));
2708 int regnor = REGNO (XEXP (parmreg, 0));
2709 int regnoi = REGNO (XEXP (parmreg, 1));
2710 rtx stackr = adjust_address_nv (data->stack_parm, submode, 0);
2711 rtx stacki = adjust_address_nv (data->stack_parm, submode,
2712 GET_MODE_SIZE (submode));
2714 /* Scan backwards for the set of the real and
2716 for (sinsn = linsn; sinsn != 0;
2717 sinsn = prev_nonnote_insn (sinsn))
2719 set = single_set (sinsn);
2723 if (SET_DEST (set) == regno_reg_rtx [regnoi])
2725 = gen_rtx_EXPR_LIST (REG_EQUIV, stacki,
2727 else if (SET_DEST (set) == regno_reg_rtx [regnor])
2729 = gen_rtx_EXPR_LIST (REG_EQUIV, stackr,
2733 else if ((set = single_set (linsn)) != 0
2734 && SET_DEST (set) == parmreg)
2736 = gen_rtx_EXPR_LIST (REG_EQUIV,
2737 data->stack_parm, REG_NOTES (linsn));
2740 /* For pointer data type, suggest pointer register. */
2741 if (POINTER_TYPE_P (TREE_TYPE (parm)))
2742 mark_reg_pointer (parmreg,
2743 TYPE_ALIGN (TREE_TYPE (TREE_TYPE (parm))));
2746 /* A subroutine of assign_parms. Allocate stack space to hold the current
2747 parameter. Get it there. Perform all ABI specified conversions. */
2750 assign_parm_setup_stack (struct assign_parm_data_all *all, tree parm,
2751 struct assign_parm_data_one *data)
2753 /* Value must be stored in the stack slot STACK_PARM during function
2755 bool to_conversion = false;
2757 if (data->promoted_mode != data->nominal_mode)
2759 /* Conversion is required. */
2760 rtx tempreg = gen_reg_rtx (GET_MODE (data->entry_parm));
2762 emit_move_insn (tempreg, validize_mem (data->entry_parm));
2764 push_to_sequence (all->conversion_insns);
2765 to_conversion = true;
2767 data->entry_parm = convert_to_mode (data->nominal_mode, tempreg,
2768 TYPE_UNSIGNED (TREE_TYPE (parm)));
2770 if (data->stack_parm)
2771 /* ??? This may need a big-endian conversion on sparc64. */
2773 = adjust_address (data->stack_parm, data->nominal_mode, 0);
2776 if (data->entry_parm != data->stack_parm)
2780 if (data->stack_parm == 0)
2783 = assign_stack_local (GET_MODE (data->entry_parm),
2784 GET_MODE_SIZE (GET_MODE (data->entry_parm)),
2785 TYPE_ALIGN (data->passed_type));
2786 set_mem_attributes (data->stack_parm, parm, 1);
2789 dest = validize_mem (data->stack_parm);
2790 src = validize_mem (data->entry_parm);
2794 /* Use a block move to handle potentially misaligned entry_parm. */
2796 push_to_sequence (all->conversion_insns);
2797 to_conversion = true;
2799 emit_block_move (dest, src,
2800 GEN_INT (int_size_in_bytes (data->passed_type)),
2804 emit_move_insn (dest, src);
2809 all->conversion_insns = get_insns ();
2813 SET_DECL_RTL (parm, data->stack_parm);
2816 /* A subroutine of assign_parms. If the ABI splits complex arguments, then
2817 undo the frobbing that we did in assign_parms_augmented_arg_list. */
2820 assign_parms_unsplit_complex (struct assign_parm_data_all *all, tree fnargs)
2823 tree orig_fnargs = all->orig_fnargs;
2825 for (parm = orig_fnargs; parm; parm = TREE_CHAIN (parm))
2827 if (TREE_CODE (TREE_TYPE (parm)) == COMPLEX_TYPE
2828 && targetm.calls.split_complex_arg (TREE_TYPE (parm)))
2830 rtx tmp, real, imag;
2831 enum machine_mode inner = GET_MODE_INNER (DECL_MODE (parm));
2833 real = DECL_RTL (fnargs);
2834 imag = DECL_RTL (TREE_CHAIN (fnargs));
2835 if (inner != GET_MODE (real))
2837 real = gen_lowpart_SUBREG (inner, real);
2838 imag = gen_lowpart_SUBREG (inner, imag);
2841 if (TREE_ADDRESSABLE (parm))
2844 HOST_WIDE_INT size = int_size_in_bytes (TREE_TYPE (parm));
2846 /* split_complex_arg put the real and imag parts in
2847 pseudos. Move them to memory. */
2848 tmp = assign_stack_local (DECL_MODE (parm), size,
2849 TYPE_ALIGN (TREE_TYPE (parm)));
2850 set_mem_attributes (tmp, parm, 1);
2851 rmem = adjust_address_nv (tmp, inner, 0);
2852 imem = adjust_address_nv (tmp, inner, GET_MODE_SIZE (inner));
2853 push_to_sequence (all->conversion_insns);
2854 emit_move_insn (rmem, real);
2855 emit_move_insn (imem, imag);
2856 all->conversion_insns = get_insns ();
2860 tmp = gen_rtx_CONCAT (DECL_MODE (parm), real, imag);
2861 SET_DECL_RTL (parm, tmp);
2863 real = DECL_INCOMING_RTL (fnargs);
2864 imag = DECL_INCOMING_RTL (TREE_CHAIN (fnargs));
2865 if (inner != GET_MODE (real))
2867 real = gen_lowpart_SUBREG (inner, real);
2868 imag = gen_lowpart_SUBREG (inner, imag);
2870 tmp = gen_rtx_CONCAT (DECL_MODE (parm), real, imag);
2871 set_decl_incoming_rtl (parm, tmp);
2872 fnargs = TREE_CHAIN (fnargs);
2876 SET_DECL_RTL (parm, DECL_RTL (fnargs));
2877 set_decl_incoming_rtl (parm, DECL_INCOMING_RTL (fnargs));
2879 /* Set MEM_EXPR to the original decl, i.e. to PARM,
2880 instead of the copy of decl, i.e. FNARGS. */
2881 if (DECL_INCOMING_RTL (parm) && MEM_P (DECL_INCOMING_RTL (parm)))
2882 set_mem_expr (DECL_INCOMING_RTL (parm), parm);
2885 fnargs = TREE_CHAIN (fnargs);
2889 /* Assign RTL expressions to the function's parameters. This may involve
2890 copying them into registers and using those registers as the DECL_RTL. */
2893 assign_parms (tree fndecl)
2895 struct assign_parm_data_all all;
2897 rtx internal_arg_pointer;
2899 /* If the reg that the virtual arg pointer will be translated into is
2900 not a fixed reg or is the stack pointer, make a copy of the virtual
2901 arg pointer, and address parms via the copy. The frame pointer is
2902 considered fixed even though it is not marked as such.
2904 The second time through, simply use ap to avoid generating rtx. */
2906 if ((ARG_POINTER_REGNUM == STACK_POINTER_REGNUM
2907 || ! (fixed_regs[ARG_POINTER_REGNUM]
2908 || ARG_POINTER_REGNUM == FRAME_POINTER_REGNUM)))
2909 internal_arg_pointer = copy_to_reg (virtual_incoming_args_rtx);
2911 internal_arg_pointer = virtual_incoming_args_rtx;
2912 current_function_internal_arg_pointer = internal_arg_pointer;
2914 assign_parms_initialize_all (&all);
2915 fnargs = assign_parms_augmented_arg_list (&all);
2917 for (parm = fnargs; parm; parm = TREE_CHAIN (parm))
2919 struct assign_parm_data_one data;
2921 /* Extract the type of PARM; adjust it according to ABI. */
2922 assign_parm_find_data_types (&all, parm, &data);
2924 /* Early out for errors and void parameters. */
2925 if (data.passed_mode == VOIDmode)
2927 SET_DECL_RTL (parm, const0_rtx);
2928 DECL_INCOMING_RTL (parm) = DECL_RTL (parm);
2932 if (current_function_stdarg && !TREE_CHAIN (parm))
2933 assign_parms_setup_varargs (&all, &data, false);
2935 /* Find out where the parameter arrives in this function. */
2936 assign_parm_find_entry_rtl (&all, &data);
2938 /* Find out where stack space for this parameter might be. */
2939 if (assign_parm_is_stack_parm (&all, &data))
2941 assign_parm_find_stack_rtl (parm, &data);
2942 assign_parm_adjust_entry_rtl (&data);
2945 /* Record permanently how this parm was passed. */
2946 set_decl_incoming_rtl (parm, data.entry_parm);
2948 /* Update info on where next arg arrives in registers. */
2949 FUNCTION_ARG_ADVANCE (all.args_so_far, data.promoted_mode,
2950 data.passed_type, data.named_arg);
2952 assign_parm_adjust_stack_rtl (&data);
2954 if (assign_parm_setup_block_p (&data))
2955 assign_parm_setup_block (&all, parm, &data);
2956 else if (data.passed_pointer || use_register_for_decl (parm))
2957 assign_parm_setup_reg (&all, parm, &data);
2959 assign_parm_setup_stack (&all, parm, &data);
2962 if (targetm.calls.split_complex_arg && fnargs != all.orig_fnargs)
2963 assign_parms_unsplit_complex (&all, fnargs);
2965 /* Output all parameter conversion instructions (possibly including calls)
2966 now that all parameters have been copied out of hard registers. */
2967 emit_insn (all.conversion_insns);
2969 /* If we are receiving a struct value address as the first argument, set up
2970 the RTL for the function result. As this might require code to convert
2971 the transmitted address to Pmode, we do this here to ensure that possible
2972 preliminary conversions of the address have been emitted already. */
2973 if (all.function_result_decl)
2975 tree result = DECL_RESULT (current_function_decl);
2976 rtx addr = DECL_RTL (all.function_result_decl);
2979 if (DECL_BY_REFERENCE (result))
2983 addr = convert_memory_address (Pmode, addr);
2984 x = gen_rtx_MEM (DECL_MODE (result), addr);
2985 set_mem_attributes (x, result, 1);
2987 SET_DECL_RTL (result, x);
2990 /* We have aligned all the args, so add space for the pretend args. */
2991 current_function_pretend_args_size = all.pretend_args_size;
2992 all.stack_args_size.constant += all.extra_pretend_bytes;
2993 current_function_args_size = all.stack_args_size.constant;
2995 /* Adjust function incoming argument size for alignment and
2998 #ifdef REG_PARM_STACK_SPACE
2999 current_function_args_size = MAX (current_function_args_size,
3000 REG_PARM_STACK_SPACE (fndecl));
3003 current_function_args_size = CEIL_ROUND (current_function_args_size,
3004 PARM_BOUNDARY / BITS_PER_UNIT);
3006 #ifdef ARGS_GROW_DOWNWARD
3007 current_function_arg_offset_rtx
3008 = (all.stack_args_size.var == 0 ? GEN_INT (-all.stack_args_size.constant)
3009 : expand_expr (size_diffop (all.stack_args_size.var,
3010 size_int (-all.stack_args_size.constant)),
3011 NULL_RTX, VOIDmode, 0));
3013 current_function_arg_offset_rtx = ARGS_SIZE_RTX (all.stack_args_size);
3016 /* See how many bytes, if any, of its args a function should try to pop
3019 current_function_pops_args = RETURN_POPS_ARGS (fndecl, TREE_TYPE (fndecl),
3020 current_function_args_size);
3022 /* For stdarg.h function, save info about
3023 regs and stack space used by the named args. */
3025 current_function_args_info = all.args_so_far;
3027 /* Set the rtx used for the function return value. Put this in its
3028 own variable so any optimizers that need this information don't have
3029 to include tree.h. Do this here so it gets done when an inlined
3030 function gets output. */
3032 current_function_return_rtx
3033 = (DECL_RTL_SET_P (DECL_RESULT (fndecl))
3034 ? DECL_RTL (DECL_RESULT (fndecl)) : NULL_RTX);
3036 /* If scalar return value was computed in a pseudo-reg, or was a named
3037 return value that got dumped to the stack, copy that to the hard
3039 if (DECL_RTL_SET_P (DECL_RESULT (fndecl)))
3041 tree decl_result = DECL_RESULT (fndecl);
3042 rtx decl_rtl = DECL_RTL (decl_result);
3044 if (REG_P (decl_rtl)
3045 ? REGNO (decl_rtl) >= FIRST_PSEUDO_REGISTER
3046 : DECL_REGISTER (decl_result))
3050 real_decl_rtl = targetm.calls.function_value (TREE_TYPE (decl_result),
3052 REG_FUNCTION_VALUE_P (real_decl_rtl) = 1;
3053 /* The delay slot scheduler assumes that current_function_return_rtx
3054 holds the hard register containing the return value, not a
3055 temporary pseudo. */
3056 current_function_return_rtx = real_decl_rtl;
3061 /* A subroutine of gimplify_parameters, invoked via walk_tree.
3062 For all seen types, gimplify their sizes. */
3065 gimplify_parm_type (tree *tp, int *walk_subtrees, void *data)
3072 if (POINTER_TYPE_P (t))
3074 else if (TYPE_SIZE (t) && !TREE_CONSTANT (TYPE_SIZE (t))
3075 && !TYPE_SIZES_GIMPLIFIED (t))
3077 gimplify_type_sizes (t, (tree *) data);
3085 /* Gimplify the parameter list for current_function_decl. This involves
3086 evaluating SAVE_EXPRs of variable sized parameters and generating code
3087 to implement callee-copies reference parameters. Returns a list of
3088 statements to add to the beginning of the function, or NULL if nothing
3092 gimplify_parameters (void)
3094 struct assign_parm_data_all all;
3095 tree fnargs, parm, stmts = NULL;
3097 assign_parms_initialize_all (&all);
3098 fnargs = assign_parms_augmented_arg_list (&all);
3100 for (parm = fnargs; parm; parm = TREE_CHAIN (parm))
3102 struct assign_parm_data_one data;
3104 /* Extract the type of PARM; adjust it according to ABI. */
3105 assign_parm_find_data_types (&all, parm, &data);
3107 /* Early out for errors and void parameters. */
3108 if (data.passed_mode == VOIDmode || DECL_SIZE (parm) == NULL)
3111 /* Update info on where next arg arrives in registers. */
3112 FUNCTION_ARG_ADVANCE (all.args_so_far, data.promoted_mode,
3113 data.passed_type, data.named_arg);
3115 /* ??? Once upon a time variable_size stuffed parameter list
3116 SAVE_EXPRs (amongst others) onto a pending sizes list. This
3117 turned out to be less than manageable in the gimple world.
3118 Now we have to hunt them down ourselves. */
3119 walk_tree_without_duplicates (&data.passed_type,
3120 gimplify_parm_type, &stmts);
3122 if (!TREE_CONSTANT (DECL_SIZE (parm)))
3124 gimplify_one_sizepos (&DECL_SIZE (parm), &stmts);
3125 gimplify_one_sizepos (&DECL_SIZE_UNIT (parm), &stmts);
3128 if (data.passed_pointer)
3130 tree type = TREE_TYPE (data.passed_type);
3131 if (reference_callee_copied (&all.args_so_far, TYPE_MODE (type),
3132 type, data.named_arg))
3136 /* For constant sized objects, this is trivial; for
3137 variable-sized objects, we have to play games. */
3138 if (TREE_CONSTANT (DECL_SIZE (parm)))
3140 local = create_tmp_var (type, get_name (parm));
3141 DECL_IGNORED_P (local) = 0;
3145 tree ptr_type, addr, args;
3147 ptr_type = build_pointer_type (type);
3148 addr = create_tmp_var (ptr_type, get_name (parm));
3149 DECL_IGNORED_P (addr) = 0;
3150 local = build_fold_indirect_ref (addr);
3152 args = tree_cons (NULL, DECL_SIZE_UNIT (parm), NULL);
3153 t = built_in_decls[BUILT_IN_ALLOCA];
3154 t = build_function_call_expr (t, args);
3155 t = fold_convert (ptr_type, t);
3156 t = build2 (MODIFY_EXPR, void_type_node, addr, t);
3157 gimplify_and_add (t, &stmts);
3160 t = build2 (MODIFY_EXPR, void_type_node, local, parm);
3161 gimplify_and_add (t, &stmts);
3163 SET_DECL_VALUE_EXPR (parm, local);
3164 DECL_HAS_VALUE_EXPR_P (parm) = 1;
3172 /* Indicate whether REGNO is an incoming argument to the current function
3173 that was promoted to a wider mode. If so, return the RTX for the
3174 register (to get its mode). PMODE and PUNSIGNEDP are set to the mode
3175 that REGNO is promoted from and whether the promotion was signed or
3179 promoted_input_arg (unsigned int regno, enum machine_mode *pmode, int *punsignedp)
3183 for (arg = DECL_ARGUMENTS (current_function_decl); arg;
3184 arg = TREE_CHAIN (arg))
3185 if (REG_P (DECL_INCOMING_RTL (arg))
3186 && REGNO (DECL_INCOMING_RTL (arg)) == regno
3187 && TYPE_MODE (DECL_ARG_TYPE (arg)) == TYPE_MODE (TREE_TYPE (arg)))
3189 enum machine_mode mode = TYPE_MODE (TREE_TYPE (arg));
3190 int unsignedp = TYPE_UNSIGNED (TREE_TYPE (arg));
3192 mode = promote_mode (TREE_TYPE (arg), mode, &unsignedp, 1);
3193 if (mode == GET_MODE (DECL_INCOMING_RTL (arg))
3194 && mode != DECL_MODE (arg))
3196 *pmode = DECL_MODE (arg);
3197 *punsignedp = unsignedp;
3198 return DECL_INCOMING_RTL (arg);
3206 /* Compute the size and offset from the start of the stacked arguments for a
3207 parm passed in mode PASSED_MODE and with type TYPE.
3209 INITIAL_OFFSET_PTR points to the current offset into the stacked
3212 The starting offset and size for this parm are returned in
3213 LOCATE->OFFSET and LOCATE->SIZE, respectively. When IN_REGS is
3214 nonzero, the offset is that of stack slot, which is returned in
3215 LOCATE->SLOT_OFFSET. LOCATE->ALIGNMENT_PAD is the amount of
3216 padding required from the initial offset ptr to the stack slot.
3218 IN_REGS is nonzero if the argument will be passed in registers. It will
3219 never be set if REG_PARM_STACK_SPACE is not defined.
3221 FNDECL is the function in which the argument was defined.
3223 There are two types of rounding that are done. The first, controlled by
3224 FUNCTION_ARG_BOUNDARY, forces the offset from the start of the argument
3225 list to be aligned to the specific boundary (in bits). This rounding
3226 affects the initial and starting offsets, but not the argument size.
3228 The second, controlled by FUNCTION_ARG_PADDING and PARM_BOUNDARY,
3229 optionally rounds the size of the parm to PARM_BOUNDARY. The
3230 initial offset is not affected by this rounding, while the size always
3231 is and the starting offset may be. */
3233 /* LOCATE->OFFSET will be negative for ARGS_GROW_DOWNWARD case;
3234 INITIAL_OFFSET_PTR is positive because locate_and_pad_parm's
3235 callers pass in the total size of args so far as
3236 INITIAL_OFFSET_PTR. LOCATE->SIZE is always positive. */
3239 locate_and_pad_parm (enum machine_mode passed_mode, tree type, int in_regs,
3240 int partial, tree fndecl ATTRIBUTE_UNUSED,
3241 struct args_size *initial_offset_ptr,
3242 struct locate_and_pad_arg_data *locate)
3245 enum direction where_pad;
3246 unsigned int boundary;
3247 int reg_parm_stack_space = 0;
3248 int part_size_in_regs;
3250 #ifdef REG_PARM_STACK_SPACE
3251 reg_parm_stack_space = REG_PARM_STACK_SPACE (fndecl);
3253 /* If we have found a stack parm before we reach the end of the
3254 area reserved for registers, skip that area. */
3257 if (reg_parm_stack_space > 0)
3259 if (initial_offset_ptr->var)
3261 initial_offset_ptr->var
3262 = size_binop (MAX_EXPR, ARGS_SIZE_TREE (*initial_offset_ptr),
3263 ssize_int (reg_parm_stack_space));
3264 initial_offset_ptr->constant = 0;
3266 else if (initial_offset_ptr->constant < reg_parm_stack_space)
3267 initial_offset_ptr->constant = reg_parm_stack_space;
3270 #endif /* REG_PARM_STACK_SPACE */
3272 part_size_in_regs = (reg_parm_stack_space == 0 ? partial : 0);
3275 = type ? size_in_bytes (type) : size_int (GET_MODE_SIZE (passed_mode));
3276 where_pad = FUNCTION_ARG_PADDING (passed_mode, type);
3277 boundary = FUNCTION_ARG_BOUNDARY (passed_mode, type);
3278 locate->where_pad = where_pad;
3279 locate->boundary = boundary;
3281 /* Remember if the outgoing parameter requires extra alignment on the
3282 calling function side. */
3283 if (boundary > PREFERRED_STACK_BOUNDARY)
3284 boundary = PREFERRED_STACK_BOUNDARY;
3285 if (cfun->stack_alignment_needed < boundary)
3286 cfun->stack_alignment_needed = boundary;
3288 #ifdef ARGS_GROW_DOWNWARD
3289 locate->slot_offset.constant = -initial_offset_ptr->constant;
3290 if (initial_offset_ptr->var)
3291 locate->slot_offset.var = size_binop (MINUS_EXPR, ssize_int (0),
3292 initial_offset_ptr->var);
3296 if (where_pad != none
3297 && (!host_integerp (sizetree, 1)
3298 || (tree_low_cst (sizetree, 1) * BITS_PER_UNIT) % PARM_BOUNDARY))
3299 s2 = round_up (s2, PARM_BOUNDARY / BITS_PER_UNIT);
3300 SUB_PARM_SIZE (locate->slot_offset, s2);
3303 locate->slot_offset.constant += part_size_in_regs;
3306 #ifdef REG_PARM_STACK_SPACE
3307 || REG_PARM_STACK_SPACE (fndecl) > 0
3310 pad_to_arg_alignment (&locate->slot_offset, boundary,
3311 &locate->alignment_pad);
3313 locate->size.constant = (-initial_offset_ptr->constant
3314 - locate->slot_offset.constant);
3315 if (initial_offset_ptr->var)
3316 locate->size.var = size_binop (MINUS_EXPR,
3317 size_binop (MINUS_EXPR,
3319 initial_offset_ptr->var),
3320 locate->slot_offset.var);
3322 /* Pad_below needs the pre-rounded size to know how much to pad
3324 locate->offset = locate->slot_offset;
3325 if (where_pad == downward)
3326 pad_below (&locate->offset, passed_mode, sizetree);
3328 #else /* !ARGS_GROW_DOWNWARD */
3330 #ifdef REG_PARM_STACK_SPACE
3331 || REG_PARM_STACK_SPACE (fndecl) > 0
3334 pad_to_arg_alignment (initial_offset_ptr, boundary,
3335 &locate->alignment_pad);
3336 locate->slot_offset = *initial_offset_ptr;
3338 #ifdef PUSH_ROUNDING
3339 if (passed_mode != BLKmode)
3340 sizetree = size_int (PUSH_ROUNDING (TREE_INT_CST_LOW (sizetree)));
3343 /* Pad_below needs the pre-rounded size to know how much to pad below
3344 so this must be done before rounding up. */
3345 locate->offset = locate->slot_offset;
3346 if (where_pad == downward)
3347 pad_below (&locate->offset, passed_mode, sizetree);
3349 if (where_pad != none
3350 && (!host_integerp (sizetree, 1)
3351 || (tree_low_cst (sizetree, 1) * BITS_PER_UNIT) % PARM_BOUNDARY))
3352 sizetree = round_up (sizetree, PARM_BOUNDARY / BITS_PER_UNIT);
3354 ADD_PARM_SIZE (locate->size, sizetree);
3356 locate->size.constant -= part_size_in_regs;
3357 #endif /* ARGS_GROW_DOWNWARD */
3360 /* Round the stack offset in *OFFSET_PTR up to a multiple of BOUNDARY.
3361 BOUNDARY is measured in bits, but must be a multiple of a storage unit. */
3364 pad_to_arg_alignment (struct args_size *offset_ptr, int boundary,
3365 struct args_size *alignment_pad)
3367 tree save_var = NULL_TREE;
3368 HOST_WIDE_INT save_constant = 0;
3369 int boundary_in_bytes = boundary / BITS_PER_UNIT;
3370 HOST_WIDE_INT sp_offset = STACK_POINTER_OFFSET;
3372 #ifdef SPARC_STACK_BOUNDARY_HACK
3373 /* ??? The SPARC port may claim a STACK_BOUNDARY higher than
3374 the real alignment of %sp. However, when it does this, the
3375 alignment of %sp+STACK_POINTER_OFFSET is STACK_BOUNDARY. */
3376 if (SPARC_STACK_BOUNDARY_HACK)
3380 if (boundary > PARM_BOUNDARY && boundary > STACK_BOUNDARY)
3382 save_var = offset_ptr->var;
3383 save_constant = offset_ptr->constant;
3386 alignment_pad->var = NULL_TREE;
3387 alignment_pad->constant = 0;
3389 if (boundary > BITS_PER_UNIT)
3391 if (offset_ptr->var)
3393 tree sp_offset_tree = ssize_int (sp_offset);
3394 tree offset = size_binop (PLUS_EXPR,
3395 ARGS_SIZE_TREE (*offset_ptr),
3397 #ifdef ARGS_GROW_DOWNWARD
3398 tree rounded = round_down (offset, boundary / BITS_PER_UNIT);
3400 tree rounded = round_up (offset, boundary / BITS_PER_UNIT);
3403 offset_ptr->var = size_binop (MINUS_EXPR, rounded, sp_offset_tree);
3404 /* ARGS_SIZE_TREE includes constant term. */
3405 offset_ptr->constant = 0;
3406 if (boundary > PARM_BOUNDARY && boundary > STACK_BOUNDARY)
3407 alignment_pad->var = size_binop (MINUS_EXPR, offset_ptr->var,
3412 offset_ptr->constant = -sp_offset +
3413 #ifdef ARGS_GROW_DOWNWARD
3414 FLOOR_ROUND (offset_ptr->constant + sp_offset, boundary_in_bytes);
3416 CEIL_ROUND (offset_ptr->constant + sp_offset, boundary_in_bytes);
3418 if (boundary > PARM_BOUNDARY && boundary > STACK_BOUNDARY)
3419 alignment_pad->constant = offset_ptr->constant - save_constant;
3425 pad_below (struct args_size *offset_ptr, enum machine_mode passed_mode, tree sizetree)
3427 if (passed_mode != BLKmode)
3429 if (GET_MODE_BITSIZE (passed_mode) % PARM_BOUNDARY)
3430 offset_ptr->constant
3431 += (((GET_MODE_BITSIZE (passed_mode) + PARM_BOUNDARY - 1)
3432 / PARM_BOUNDARY * PARM_BOUNDARY / BITS_PER_UNIT)
3433 - GET_MODE_SIZE (passed_mode));
3437 if (TREE_CODE (sizetree) != INTEGER_CST
3438 || (TREE_INT_CST_LOW (sizetree) * BITS_PER_UNIT) % PARM_BOUNDARY)
3440 /* Round the size up to multiple of PARM_BOUNDARY bits. */
3441 tree s2 = round_up (sizetree, PARM_BOUNDARY / BITS_PER_UNIT);
3443 ADD_PARM_SIZE (*offset_ptr, s2);
3444 SUB_PARM_SIZE (*offset_ptr, sizetree);
3449 /* Walk the tree of blocks describing the binding levels within a function
3450 and warn about variables the might be killed by setjmp or vfork.
3451 This is done after calling flow_analysis and before global_alloc
3452 clobbers the pseudo-regs to hard regs. */
3455 setjmp_vars_warning (tree block)
3459 for (decl = BLOCK_VARS (block); decl; decl = TREE_CHAIN (decl))
3461 if (TREE_CODE (decl) == VAR_DECL
3462 && DECL_RTL_SET_P (decl)
3463 && REG_P (DECL_RTL (decl))
3464 && regno_clobbered_at_setjmp (REGNO (DECL_RTL (decl))))
3465 warning (0, "variable %q+D might be clobbered by %<longjmp%>"
3470 for (sub = BLOCK_SUBBLOCKS (block); sub; sub = TREE_CHAIN (sub))
3471 setjmp_vars_warning (sub);
3474 /* Do the appropriate part of setjmp_vars_warning
3475 but for arguments instead of local variables. */
3478 setjmp_args_warning (void)
3481 for (decl = DECL_ARGUMENTS (current_function_decl);
3482 decl; decl = TREE_CHAIN (decl))
3483 if (DECL_RTL (decl) != 0
3484 && REG_P (DECL_RTL (decl))
3485 && regno_clobbered_at_setjmp (REGNO (DECL_RTL (decl))))
3486 warning (0, "argument %q+D might be clobbered by %<longjmp%> or %<vfork%>",
3491 /* Identify BLOCKs referenced by more than one NOTE_INSN_BLOCK_{BEG,END},
3492 and create duplicate blocks. */
3493 /* ??? Need an option to either create block fragments or to create
3494 abstract origin duplicates of a source block. It really depends
3495 on what optimization has been performed. */
3498 reorder_blocks (void)
3500 tree block = DECL_INITIAL (current_function_decl);
3501 VEC(tree,heap) *block_stack;
3503 if (block == NULL_TREE)
3506 block_stack = VEC_alloc (tree, heap, 10);
3508 /* Reset the TREE_ASM_WRITTEN bit for all blocks. */
3509 clear_block_marks (block);
3511 /* Prune the old trees away, so that they don't get in the way. */
3512 BLOCK_SUBBLOCKS (block) = NULL_TREE;
3513 BLOCK_CHAIN (block) = NULL_TREE;
3515 /* Recreate the block tree from the note nesting. */
3516 reorder_blocks_1 (get_insns (), block, &block_stack);
3517 BLOCK_SUBBLOCKS (block) = blocks_nreverse (BLOCK_SUBBLOCKS (block));
3519 /* Remove deleted blocks from the block fragment chains. */
3520 reorder_fix_fragments (block);
3522 VEC_free (tree, heap, block_stack);
3525 /* Helper function for reorder_blocks. Reset TREE_ASM_WRITTEN. */
3528 clear_block_marks (tree block)
3532 TREE_ASM_WRITTEN (block) = 0;
3533 clear_block_marks (BLOCK_SUBBLOCKS (block));
3534 block = BLOCK_CHAIN (block);
3539 reorder_blocks_1 (rtx insns, tree current_block, VEC(tree,heap) **p_block_stack)
3543 for (insn = insns; insn; insn = NEXT_INSN (insn))
3547 if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_BLOCK_BEG)
3549 tree block = NOTE_BLOCK (insn);
3551 /* If we have seen this block before, that means it now
3552 spans multiple address regions. Create a new fragment. */
3553 if (TREE_ASM_WRITTEN (block))
3555 tree new_block = copy_node (block);
3558 origin = (BLOCK_FRAGMENT_ORIGIN (block)
3559 ? BLOCK_FRAGMENT_ORIGIN (block)
3561 BLOCK_FRAGMENT_ORIGIN (new_block) = origin;
3562 BLOCK_FRAGMENT_CHAIN (new_block)
3563 = BLOCK_FRAGMENT_CHAIN (origin);
3564 BLOCK_FRAGMENT_CHAIN (origin) = new_block;
3566 NOTE_BLOCK (insn) = new_block;
3570 BLOCK_SUBBLOCKS (block) = 0;
3571 TREE_ASM_WRITTEN (block) = 1;
3572 /* When there's only one block for the entire function,
3573 current_block == block and we mustn't do this, it
3574 will cause infinite recursion. */
3575 if (block != current_block)
3577 BLOCK_SUPERCONTEXT (block) = current_block;
3578 BLOCK_CHAIN (block) = BLOCK_SUBBLOCKS (current_block);
3579 BLOCK_SUBBLOCKS (current_block) = block;
3580 current_block = block;
3582 VEC_safe_push (tree, heap, *p_block_stack, block);
3584 else if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_BLOCK_END)
3586 NOTE_BLOCK (insn) = VEC_pop (tree, *p_block_stack);
3587 BLOCK_SUBBLOCKS (current_block)
3588 = blocks_nreverse (BLOCK_SUBBLOCKS (current_block));
3589 current_block = BLOCK_SUPERCONTEXT (current_block);
3595 /* Rationalize BLOCK_FRAGMENT_ORIGIN. If an origin block no longer
3596 appears in the block tree, select one of the fragments to become
3597 the new origin block. */
3600 reorder_fix_fragments (tree block)
3604 tree dup_origin = BLOCK_FRAGMENT_ORIGIN (block);
3605 tree new_origin = NULL_TREE;
3609 if (! TREE_ASM_WRITTEN (dup_origin))
3611 new_origin = BLOCK_FRAGMENT_CHAIN (dup_origin);
3613 /* Find the first of the remaining fragments. There must
3614 be at least one -- the current block. */
3615 while (! TREE_ASM_WRITTEN (new_origin))
3616 new_origin = BLOCK_FRAGMENT_CHAIN (new_origin);
3617 BLOCK_FRAGMENT_ORIGIN (new_origin) = NULL_TREE;
3620 else if (! dup_origin)
3623 /* Re-root the rest of the fragments to the new origin. In the
3624 case that DUP_ORIGIN was null, that means BLOCK was the origin
3625 of a chain of fragments and we want to remove those fragments
3626 that didn't make it to the output. */
3629 tree *pp = &BLOCK_FRAGMENT_CHAIN (new_origin);
3634 if (TREE_ASM_WRITTEN (chain))
3636 BLOCK_FRAGMENT_ORIGIN (chain) = new_origin;
3638 pp = &BLOCK_FRAGMENT_CHAIN (chain);
3640 chain = BLOCK_FRAGMENT_CHAIN (chain);
3645 reorder_fix_fragments (BLOCK_SUBBLOCKS (block));
3646 block = BLOCK_CHAIN (block);
3650 /* Reverse the order of elements in the chain T of blocks,
3651 and return the new head of the chain (old last element). */
3654 blocks_nreverse (tree t)
3656 tree prev = 0, decl, next;
3657 for (decl = t; decl; decl = next)
3659 next = BLOCK_CHAIN (decl);
3660 BLOCK_CHAIN (decl) = prev;
3666 /* Count the subblocks of the list starting with BLOCK. If VECTOR is
3667 non-NULL, list them all into VECTOR, in a depth-first preorder
3668 traversal of the block tree. Also clear TREE_ASM_WRITTEN in all
3672 all_blocks (tree block, tree *vector)
3678 TREE_ASM_WRITTEN (block) = 0;
3680 /* Record this block. */
3682 vector[n_blocks] = block;
3686 /* Record the subblocks, and their subblocks... */
3687 n_blocks += all_blocks (BLOCK_SUBBLOCKS (block),
3688 vector ? vector + n_blocks : 0);
3689 block = BLOCK_CHAIN (block);
3695 /* Return a vector containing all the blocks rooted at BLOCK. The
3696 number of elements in the vector is stored in N_BLOCKS_P. The
3697 vector is dynamically allocated; it is the caller's responsibility
3698 to call `free' on the pointer returned. */
3701 get_block_vector (tree block, int *n_blocks_p)
3705 *n_blocks_p = all_blocks (block, NULL);
3706 block_vector = xmalloc (*n_blocks_p * sizeof (tree));
3707 all_blocks (block, block_vector);
3709 return block_vector;
3712 static GTY(()) int next_block_index = 2;
3714 /* Set BLOCK_NUMBER for all the blocks in FN. */
3717 number_blocks (tree fn)
3723 /* For SDB and XCOFF debugging output, we start numbering the blocks
3724 from 1 within each function, rather than keeping a running
3726 #if defined (SDB_DEBUGGING_INFO) || defined (XCOFF_DEBUGGING_INFO)
3727 if (write_symbols == SDB_DEBUG || write_symbols == XCOFF_DEBUG)
3728 next_block_index = 1;
3731 block_vector = get_block_vector (DECL_INITIAL (fn), &n_blocks);
3733 /* The top-level BLOCK isn't numbered at all. */
3734 for (i = 1; i < n_blocks; ++i)
3735 /* We number the blocks from two. */
3736 BLOCK_NUMBER (block_vector[i]) = next_block_index++;
3738 free (block_vector);
3743 /* If VAR is present in a subblock of BLOCK, return the subblock. */
3746 debug_find_var_in_block_tree (tree var, tree block)
3750 for (t = BLOCK_VARS (block); t; t = TREE_CHAIN (t))
3754 for (t = BLOCK_SUBBLOCKS (block); t; t = TREE_CHAIN (t))
3756 tree ret = debug_find_var_in_block_tree (var, t);
3764 /* Allocate a function structure for FNDECL and set its contents
3768 allocate_struct_function (tree fndecl)
3771 tree fntype = fndecl ? TREE_TYPE (fndecl) : NULL_TREE;
3773 cfun = ggc_alloc_cleared (sizeof (struct function));
3775 cfun->stack_alignment_needed = STACK_BOUNDARY;
3776 cfun->preferred_stack_boundary = STACK_BOUNDARY;
3778 current_function_funcdef_no = funcdef_no++;
3780 cfun->function_frequency = FUNCTION_FREQUENCY_NORMAL;
3782 init_eh_for_function ();
3784 lang_hooks.function.init (cfun);
3785 if (init_machine_status)
3786 cfun->machine = (*init_machine_status) ();
3791 DECL_STRUCT_FUNCTION (fndecl) = cfun;
3792 cfun->decl = fndecl;
3794 result = DECL_RESULT (fndecl);
3795 if (aggregate_value_p (result, fndecl))
3797 #ifdef PCC_STATIC_STRUCT_RETURN
3798 current_function_returns_pcc_struct = 1;
3800 current_function_returns_struct = 1;
3803 current_function_returns_pointer = POINTER_TYPE_P (TREE_TYPE (result));
3805 current_function_stdarg
3807 && TYPE_ARG_TYPES (fntype) != 0
3808 && (TREE_VALUE (tree_last (TYPE_ARG_TYPES (fntype)))
3809 != void_type_node));
3811 /* Assume all registers in stdarg functions need to be saved. */
3812 cfun->va_list_gpr_size = VA_LIST_MAX_GPR_SIZE;
3813 cfun->va_list_fpr_size = VA_LIST_MAX_FPR_SIZE;
3816 /* Reset cfun, and other non-struct-function variables to defaults as
3817 appropriate for emitting rtl at the start of a function. */
3820 prepare_function_start (tree fndecl)
3822 if (fndecl && DECL_STRUCT_FUNCTION (fndecl))
3823 cfun = DECL_STRUCT_FUNCTION (fndecl);
3825 allocate_struct_function (fndecl);
3827 init_varasm_status (cfun);
3830 cse_not_expected = ! optimize;
3832 /* Caller save not needed yet. */
3833 caller_save_needed = 0;
3835 /* We haven't done register allocation yet. */
3838 /* Indicate that we have not instantiated virtual registers yet. */
3839 virtuals_instantiated = 0;
3841 /* Indicate that we want CONCATs now. */
3842 generating_concat_p = 1;
3844 /* Indicate we have no need of a frame pointer yet. */
3845 frame_pointer_needed = 0;
3848 /* Initialize the rtl expansion mechanism so that we can do simple things
3849 like generate sequences. This is used to provide a context during global
3850 initialization of some passes. */
3852 init_dummy_function_start (void)
3854 prepare_function_start (NULL);
3857 /* Generate RTL for the start of the function SUBR (a FUNCTION_DECL tree node)
3858 and initialize static variables for generating RTL for the statements
3862 init_function_start (tree subr)
3864 prepare_function_start (subr);
3866 /* Prevent ever trying to delete the first instruction of a
3867 function. Also tell final how to output a linenum before the
3868 function prologue. Note linenums could be missing, e.g. when
3869 compiling a Java .class file. */
3870 if (! DECL_IS_BUILTIN (subr))
3871 emit_line_note (DECL_SOURCE_LOCATION (subr));
3873 /* Make sure first insn is a note even if we don't want linenums.
3874 This makes sure the first insn will never be deleted.
3875 Also, final expects a note to appear there. */
3876 emit_note (NOTE_INSN_DELETED);
3878 /* Warn if this value is an aggregate type,
3879 regardless of which calling convention we are using for it. */
3880 if (AGGREGATE_TYPE_P (TREE_TYPE (DECL_RESULT (subr))))
3881 warning (OPT_Waggregate_return, "function returns an aggregate");
3884 /* Make sure all values used by the optimization passes have sane
3887 init_function_for_compilation (void)
3891 /* No prologue/epilogue insns yet. Make sure that these vectors are
3893 gcc_assert (VEC_length (int, prologue) == 0);
3894 gcc_assert (VEC_length (int, epilogue) == 0);
3895 gcc_assert (VEC_length (int, sibcall_epilogue) == 0);
3898 struct tree_opt_pass pass_init_function =
3902 init_function_for_compilation, /* execute */
3905 0, /* static_pass_number */
3907 0, /* properties_required */
3908 0, /* properties_provided */
3909 0, /* properties_destroyed */
3910 0, /* todo_flags_start */
3911 0, /* todo_flags_finish */
3917 expand_main_function (void)
3919 #ifdef FORCE_PREFERRED_STACK_BOUNDARY_IN_MAIN
3920 if (FORCE_PREFERRED_STACK_BOUNDARY_IN_MAIN)
3922 int align = PREFERRED_STACK_BOUNDARY / BITS_PER_UNIT;
3926 /* Forcibly align the stack. */
3927 #ifdef STACK_GROWS_DOWNWARD
3928 tmp = expand_simple_binop (Pmode, AND, stack_pointer_rtx, GEN_INT(-align),
3929 stack_pointer_rtx, 1, OPTAB_WIDEN);
3931 tmp = expand_simple_binop (Pmode, PLUS, stack_pointer_rtx,
3932 GEN_INT (align - 1), NULL_RTX, 1, OPTAB_WIDEN);
3933 tmp = expand_simple_binop (Pmode, AND, tmp, GEN_INT (-align),
3934 stack_pointer_rtx, 1, OPTAB_WIDEN);
3936 if (tmp != stack_pointer_rtx)
3937 emit_move_insn (stack_pointer_rtx, tmp);
3939 /* Enlist allocate_dynamic_stack_space to pick up the pieces. */
3940 tmp = force_reg (Pmode, const0_rtx);
3941 allocate_dynamic_stack_space (tmp, NULL_RTX, BIGGEST_ALIGNMENT);
3945 for (tmp = get_last_insn (); tmp; tmp = PREV_INSN (tmp))
3946 if (NOTE_P (tmp) && NOTE_LINE_NUMBER (tmp) == NOTE_INSN_FUNCTION_BEG)
3949 emit_insn_before (seq, tmp);
3955 #if (defined(INVOKE__main) \
3956 || (!defined(HAS_INIT_SECTION) \
3957 && !defined(INIT_SECTION_ASM_OP) \
3958 && !defined(INIT_ARRAY_SECTION_ASM_OP)))
3959 emit_library_call (init_one_libfunc (NAME__MAIN), LCT_NORMAL, VOIDmode, 0);
3963 /* Expand code to initialize the stack_protect_guard. This is invoked at
3964 the beginning of a function to be protected. */
3966 #ifndef HAVE_stack_protect_set
3967 # define HAVE_stack_protect_set 0
3968 # define gen_stack_protect_set(x,y) (gcc_unreachable (), NULL_RTX)
3972 stack_protect_prologue (void)
3974 tree guard_decl = targetm.stack_protect_guard ();
3977 /* Avoid expand_expr here, because we don't want guard_decl pulled
3978 into registers unless absolutely necessary. And we know that
3979 cfun->stack_protect_guard is a local stack slot, so this skips
3981 x = validize_mem (DECL_RTL (cfun->stack_protect_guard));
3982 y = validize_mem (DECL_RTL (guard_decl));
3984 /* Allow the target to copy from Y to X without leaking Y into a
3986 if (HAVE_stack_protect_set)
3988 rtx insn = gen_stack_protect_set (x, y);
3996 /* Otherwise do a straight move. */
3997 emit_move_insn (x, y);
4000 /* Expand code to verify the stack_protect_guard. This is invoked at
4001 the end of a function to be protected. */
4003 #ifndef HAVE_stack_protect_test
4004 # define HAVE_stack_protect_test 0
4005 # define gen_stack_protect_test(x, y, z) (gcc_unreachable (), NULL_RTX)
4009 stack_protect_epilogue (void)
4011 tree guard_decl = targetm.stack_protect_guard ();
4012 rtx label = gen_label_rtx ();
4015 /* Avoid expand_expr here, because we don't want guard_decl pulled
4016 into registers unless absolutely necessary. And we know that
4017 cfun->stack_protect_guard is a local stack slot, so this skips
4019 x = validize_mem (DECL_RTL (cfun->stack_protect_guard));
4020 y = validize_mem (DECL_RTL (guard_decl));
4022 /* Allow the target to compare Y with X without leaking either into
4024 switch (HAVE_stack_protect_test != 0)
4027 tmp = gen_stack_protect_test (x, y, label);
4036 emit_cmp_and_jump_insns (x, y, EQ, NULL_RTX, ptr_mode, 1, label);
4040 /* The noreturn predictor has been moved to the tree level. The rtl-level
4041 predictors estimate this branch about 20%, which isn't enough to get
4042 things moved out of line. Since this is the only extant case of adding
4043 a noreturn function at the rtl level, it doesn't seem worth doing ought
4044 except adding the prediction by hand. */
4045 tmp = get_last_insn ();
4047 predict_insn_def (tmp, PRED_NORETURN, TAKEN);
4049 expand_expr_stmt (targetm.stack_protect_fail ());
4053 /* Start the RTL for a new function, and set variables used for
4055 SUBR is the FUNCTION_DECL node.
4056 PARMS_HAVE_CLEANUPS is nonzero if there are cleanups associated with
4057 the function's parameters, which must be run at any return statement. */
4060 expand_function_start (tree subr)
4062 /* Make sure volatile mem refs aren't considered
4063 valid operands of arithmetic insns. */
4064 init_recog_no_volatile ();
4066 current_function_profile
4068 && ! DECL_NO_INSTRUMENT_FUNCTION_ENTRY_EXIT (subr));
4070 current_function_limit_stack
4071 = (stack_limit_rtx != NULL_RTX && ! DECL_NO_LIMIT_STACK (subr));
4073 /* Make the label for return statements to jump to. Do not special
4074 case machines with special return instructions -- they will be
4075 handled later during jump, ifcvt, or epilogue creation. */
4076 return_label = gen_label_rtx ();
4078 /* Initialize rtx used to return the value. */
4079 /* Do this before assign_parms so that we copy the struct value address
4080 before any library calls that assign parms might generate. */
4082 /* Decide whether to return the value in memory or in a register. */
4083 if (aggregate_value_p (DECL_RESULT (subr), subr))
4085 /* Returning something that won't go in a register. */
4086 rtx value_address = 0;
4088 #ifdef PCC_STATIC_STRUCT_RETURN
4089 if (current_function_returns_pcc_struct)
4091 int size = int_size_in_bytes (TREE_TYPE (DECL_RESULT (subr)));
4092 value_address = assemble_static_space (size);
4097 rtx sv = targetm.calls.struct_value_rtx (TREE_TYPE (subr), 1);
4098 /* Expect to be passed the address of a place to store the value.
4099 If it is passed as an argument, assign_parms will take care of
4103 value_address = gen_reg_rtx (Pmode);
4104 emit_move_insn (value_address, sv);
4109 rtx x = value_address;
4110 if (!DECL_BY_REFERENCE (DECL_RESULT (subr)))
4112 x = gen_rtx_MEM (DECL_MODE (DECL_RESULT (subr)), x);
4113 set_mem_attributes (x, DECL_RESULT (subr), 1);
4115 SET_DECL_RTL (DECL_RESULT (subr), x);
4118 else if (DECL_MODE (DECL_RESULT (subr)) == VOIDmode)
4119 /* If return mode is void, this decl rtl should not be used. */
4120 SET_DECL_RTL (DECL_RESULT (subr), NULL_RTX);
4123 /* Compute the return values into a pseudo reg, which we will copy
4124 into the true return register after the cleanups are done. */
4125 tree return_type = TREE_TYPE (DECL_RESULT (subr));
4126 if (TYPE_MODE (return_type) != BLKmode
4127 && targetm.calls.return_in_msb (return_type))
4128 /* expand_function_end will insert the appropriate padding in
4129 this case. Use the return value's natural (unpadded) mode
4130 within the function proper. */
4131 SET_DECL_RTL (DECL_RESULT (subr),
4132 gen_reg_rtx (TYPE_MODE (return_type)));
4135 /* In order to figure out what mode to use for the pseudo, we
4136 figure out what the mode of the eventual return register will
4137 actually be, and use that. */
4138 rtx hard_reg = hard_function_value (return_type, subr, 0, 1);
4140 /* Structures that are returned in registers are not
4141 aggregate_value_p, so we may see a PARALLEL or a REG. */
4142 if (REG_P (hard_reg))
4143 SET_DECL_RTL (DECL_RESULT (subr),
4144 gen_reg_rtx (GET_MODE (hard_reg)));
4147 gcc_assert (GET_CODE (hard_reg) == PARALLEL);
4148 SET_DECL_RTL (DECL_RESULT (subr), gen_group_rtx (hard_reg));
4152 /* Set DECL_REGISTER flag so that expand_function_end will copy the
4153 result to the real return register(s). */
4154 DECL_REGISTER (DECL_RESULT (subr)) = 1;
4157 /* Initialize rtx for parameters and local variables.
4158 In some cases this requires emitting insns. */
4159 assign_parms (subr);
4161 /* If function gets a static chain arg, store it. */
4162 if (cfun->static_chain_decl)
4164 tree parm = cfun->static_chain_decl;
4165 rtx local = gen_reg_rtx (Pmode);
4167 set_decl_incoming_rtl (parm, static_chain_incoming_rtx);
4168 SET_DECL_RTL (parm, local);
4169 mark_reg_pointer (local, TYPE_ALIGN (TREE_TYPE (TREE_TYPE (parm))));
4171 emit_move_insn (local, static_chain_incoming_rtx);
4174 /* If the function receives a non-local goto, then store the
4175 bits we need to restore the frame pointer. */
4176 if (cfun->nonlocal_goto_save_area)
4181 /* ??? We need to do this save early. Unfortunately here is
4182 before the frame variable gets declared. Help out... */
4183 expand_var (TREE_OPERAND (cfun->nonlocal_goto_save_area, 0));
4185 t_save = build4 (ARRAY_REF, ptr_type_node,
4186 cfun->nonlocal_goto_save_area,
4187 integer_zero_node, NULL_TREE, NULL_TREE);
4188 r_save = expand_expr (t_save, NULL_RTX, VOIDmode, EXPAND_WRITE);
4189 r_save = convert_memory_address (Pmode, r_save);
4191 emit_move_insn (r_save, virtual_stack_vars_rtx);
4192 update_nonlocal_goto_save_area ();
4195 /* The following was moved from init_function_start.
4196 The move is supposed to make sdb output more accurate. */
4197 /* Indicate the beginning of the function body,
4198 as opposed to parm setup. */
4199 emit_note (NOTE_INSN_FUNCTION_BEG);
4201 if (!NOTE_P (get_last_insn ()))
4202 emit_note (NOTE_INSN_DELETED);
4203 parm_birth_insn = get_last_insn ();
4205 if (current_function_profile)
4208 PROFILE_HOOK (current_function_funcdef_no);
4212 /* After the display initializations is where the tail-recursion label
4213 should go, if we end up needing one. Ensure we have a NOTE here
4214 since some things (like trampolines) get placed before this. */
4215 tail_recursion_reentry = emit_note (NOTE_INSN_DELETED);
4217 /* Make sure there is a line number after the function entry setup code. */
4218 force_next_line_note ();
4221 /* Undo the effects of init_dummy_function_start. */
4223 expand_dummy_function_end (void)
4225 /* End any sequences that failed to be closed due to syntax errors. */
4226 while (in_sequence_p ())
4229 /* Outside function body, can't compute type's actual size
4230 until next function's body starts. */
4232 free_after_parsing (cfun);
4233 free_after_compilation (cfun);
4237 /* Call DOIT for each hard register used as a return value from
4238 the current function. */
4241 diddle_return_value (void (*doit) (rtx, void *), void *arg)
4243 rtx outgoing = current_function_return_rtx;
4248 if (REG_P (outgoing))
4249 (*doit) (outgoing, arg);
4250 else if (GET_CODE (outgoing) == PARALLEL)
4254 for (i = 0; i < XVECLEN (outgoing, 0); i++)
4256 rtx x = XEXP (XVECEXP (outgoing, 0, i), 0);
4258 if (REG_P (x) && REGNO (x) < FIRST_PSEUDO_REGISTER)
4265 do_clobber_return_reg (rtx reg, void *arg ATTRIBUTE_UNUSED)
4267 emit_insn (gen_rtx_CLOBBER (VOIDmode, reg));
4271 clobber_return_register (void)
4273 diddle_return_value (do_clobber_return_reg, NULL);
4275 /* In case we do use pseudo to return value, clobber it too. */
4276 if (DECL_RTL_SET_P (DECL_RESULT (current_function_decl)))
4278 tree decl_result = DECL_RESULT (current_function_decl);
4279 rtx decl_rtl = DECL_RTL (decl_result);
4280 if (REG_P (decl_rtl) && REGNO (decl_rtl) >= FIRST_PSEUDO_REGISTER)
4282 do_clobber_return_reg (decl_rtl, NULL);
4288 do_use_return_reg (rtx reg, void *arg ATTRIBUTE_UNUSED)
4290 emit_insn (gen_rtx_USE (VOIDmode, reg));
4294 use_return_register (void)
4296 diddle_return_value (do_use_return_reg, NULL);
4299 /* Possibly warn about unused parameters. */
4301 do_warn_unused_parameter (tree fn)
4305 for (decl = DECL_ARGUMENTS (fn);
4306 decl; decl = TREE_CHAIN (decl))
4307 if (!TREE_USED (decl) && TREE_CODE (decl) == PARM_DECL
4308 && DECL_NAME (decl) && !DECL_ARTIFICIAL (decl))
4309 warning (OPT_Wunused_parameter, "unused parameter %q+D", decl);
4312 static GTY(()) rtx initial_trampoline;
4314 /* Generate RTL for the end of the current function. */
4317 expand_function_end (void)
4321 /* If arg_pointer_save_area was referenced only from a nested
4322 function, we will not have initialized it yet. Do that now. */
4323 if (arg_pointer_save_area && ! cfun->arg_pointer_save_area_init)
4324 get_arg_pointer_save_area (cfun);
4326 /* If we are doing stack checking and this function makes calls,
4327 do a stack probe at the start of the function to ensure we have enough
4328 space for another stack frame. */
4329 if (flag_stack_check && ! STACK_CHECK_BUILTIN)
4333 for (insn = get_insns (); insn; insn = NEXT_INSN (insn))
4337 probe_stack_range (STACK_CHECK_PROTECT,
4338 GEN_INT (STACK_CHECK_MAX_FRAME_SIZE));
4341 emit_insn_before (seq, tail_recursion_reentry);
4346 /* Possibly warn about unused parameters.
4347 When frontend does unit-at-a-time, the warning is already
4348 issued at finalization time. */
4349 if (warn_unused_parameter
4350 && !lang_hooks.callgraph.expand_function)
4351 do_warn_unused_parameter (current_function_decl);
4353 /* End any sequences that failed to be closed due to syntax errors. */
4354 while (in_sequence_p ())
4357 clear_pending_stack_adjust ();
4358 do_pending_stack_adjust ();
4360 /* @@@ This is a kludge. We want to ensure that instructions that
4361 may trap are not moved into the epilogue by scheduling, because
4362 we don't always emit unwind information for the epilogue.
4363 However, not all machine descriptions define a blockage insn, so
4364 emit an ASM_INPUT to act as one. */
4365 if (flag_non_call_exceptions)
4366 emit_insn (gen_rtx_ASM_INPUT (VOIDmode, ""));
4368 /* Mark the end of the function body.
4369 If control reaches this insn, the function can drop through
4370 without returning a value. */
4371 emit_note (NOTE_INSN_FUNCTION_END);
4373 /* Must mark the last line number note in the function, so that the test
4374 coverage code can avoid counting the last line twice. This just tells
4375 the code to ignore the immediately following line note, since there
4376 already exists a copy of this note somewhere above. This line number
4377 note is still needed for debugging though, so we can't delete it. */
4378 if (flag_test_coverage)
4379 emit_note (NOTE_INSN_REPEATED_LINE_NUMBER);
4381 /* Output a linenumber for the end of the function.
4382 SDB depends on this. */
4383 force_next_line_note ();
4384 emit_line_note (input_location);
4386 /* Before the return label (if any), clobber the return
4387 registers so that they are not propagated live to the rest of
4388 the function. This can only happen with functions that drop
4389 through; if there had been a return statement, there would
4390 have either been a return rtx, or a jump to the return label.
4392 We delay actual code generation after the current_function_value_rtx
4394 clobber_after = get_last_insn ();
4396 /* Output the label for the actual return from the function. */
4397 emit_label (return_label);
4399 /* Let except.c know where it should emit the call to unregister
4400 the function context for sjlj exceptions. */
4401 if (flag_exceptions && USING_SJLJ_EXCEPTIONS)
4402 sjlj_emit_function_exit_after (get_last_insn ());
4404 /* If this is an implementation of throw, do what's necessary to
4405 communicate between __builtin_eh_return and the epilogue. */
4406 expand_eh_return ();
4408 /* If scalar return value was computed in a pseudo-reg, or was a named
4409 return value that got dumped to the stack, copy that to the hard
4411 if (DECL_RTL_SET_P (DECL_RESULT (current_function_decl)))
4413 tree decl_result = DECL_RESULT (current_function_decl);
4414 rtx decl_rtl = DECL_RTL (decl_result);
4416 if (REG_P (decl_rtl)
4417 ? REGNO (decl_rtl) >= FIRST_PSEUDO_REGISTER
4418 : DECL_REGISTER (decl_result))
4420 rtx real_decl_rtl = current_function_return_rtx;
4422 /* This should be set in assign_parms. */
4423 gcc_assert (REG_FUNCTION_VALUE_P (real_decl_rtl));
4425 /* If this is a BLKmode structure being returned in registers,
4426 then use the mode computed in expand_return. Note that if
4427 decl_rtl is memory, then its mode may have been changed,
4428 but that current_function_return_rtx has not. */
4429 if (GET_MODE (real_decl_rtl) == BLKmode)
4430 PUT_MODE (real_decl_rtl, GET_MODE (decl_rtl));
4432 /* If a non-BLKmode return value should be padded at the least
4433 significant end of the register, shift it left by the appropriate
4434 amount. BLKmode results are handled using the group load/store
4436 if (TYPE_MODE (TREE_TYPE (decl_result)) != BLKmode
4437 && targetm.calls.return_in_msb (TREE_TYPE (decl_result)))
4439 emit_move_insn (gen_rtx_REG (GET_MODE (decl_rtl),
4440 REGNO (real_decl_rtl)),
4442 shift_return_value (GET_MODE (decl_rtl), true, real_decl_rtl);
4444 /* If a named return value dumped decl_return to memory, then
4445 we may need to re-do the PROMOTE_MODE signed/unsigned
4447 else if (GET_MODE (real_decl_rtl) != GET_MODE (decl_rtl))
4449 int unsignedp = TYPE_UNSIGNED (TREE_TYPE (decl_result));
4451 if (targetm.calls.promote_function_return (TREE_TYPE (current_function_decl)))
4452 promote_mode (TREE_TYPE (decl_result), GET_MODE (decl_rtl),
4455 convert_move (real_decl_rtl, decl_rtl, unsignedp);
4457 else if (GET_CODE (real_decl_rtl) == PARALLEL)
4459 /* If expand_function_start has created a PARALLEL for decl_rtl,
4460 move the result to the real return registers. Otherwise, do
4461 a group load from decl_rtl for a named return. */
4462 if (GET_CODE (decl_rtl) == PARALLEL)
4463 emit_group_move (real_decl_rtl, decl_rtl);
4465 emit_group_load (real_decl_rtl, decl_rtl,
4466 TREE_TYPE (decl_result),
4467 int_size_in_bytes (TREE_TYPE (decl_result)));
4469 /* In the case of complex integer modes smaller than a word, we'll
4470 need to generate some non-trivial bitfield insertions. Do that
4471 on a pseudo and not the hard register. */
4472 else if (GET_CODE (decl_rtl) == CONCAT
4473 && GET_MODE_CLASS (GET_MODE (decl_rtl)) == MODE_COMPLEX_INT
4474 && GET_MODE_BITSIZE (GET_MODE (decl_rtl)) <= BITS_PER_WORD)
4476 int old_generating_concat_p;
4479 old_generating_concat_p = generating_concat_p;
4480 generating_concat_p = 0;
4481 tmp = gen_reg_rtx (GET_MODE (decl_rtl));
4482 generating_concat_p = old_generating_concat_p;
4484 emit_move_insn (tmp, decl_rtl);
4485 emit_move_insn (real_decl_rtl, tmp);
4488 emit_move_insn (real_decl_rtl, decl_rtl);
4492 /* If returning a structure, arrange to return the address of the value
4493 in a place where debuggers expect to find it.
4495 If returning a structure PCC style,
4496 the caller also depends on this value.
4497 And current_function_returns_pcc_struct is not necessarily set. */
4498 if (current_function_returns_struct
4499 || current_function_returns_pcc_struct)
4501 rtx value_address = DECL_RTL (DECL_RESULT (current_function_decl));
4502 tree type = TREE_TYPE (DECL_RESULT (current_function_decl));
4505 if (DECL_BY_REFERENCE (DECL_RESULT (current_function_decl)))
4506 type = TREE_TYPE (type);
4508 value_address = XEXP (value_address, 0);
4510 outgoing = targetm.calls.function_value (build_pointer_type (type),
4511 current_function_decl, true);
4513 /* Mark this as a function return value so integrate will delete the
4514 assignment and USE below when inlining this function. */
4515 REG_FUNCTION_VALUE_P (outgoing) = 1;
4517 /* The address may be ptr_mode and OUTGOING may be Pmode. */
4518 value_address = convert_memory_address (GET_MODE (outgoing),
4521 emit_move_insn (outgoing, value_address);
4523 /* Show return register used to hold result (in this case the address
4525 current_function_return_rtx = outgoing;
4528 /* Emit the actual code to clobber return register. */
4533 clobber_return_register ();
4534 expand_naked_return ();
4538 emit_insn_after (seq, clobber_after);
4541 /* Output the label for the naked return from the function. */
4542 emit_label (naked_return_label);
4544 /* If stack protection is enabled for this function, check the guard. */
4545 if (cfun->stack_protect_guard)
4546 stack_protect_epilogue ();
4548 /* If we had calls to alloca, and this machine needs
4549 an accurate stack pointer to exit the function,
4550 insert some code to save and restore the stack pointer. */
4551 if (! EXIT_IGNORE_STACK
4552 && current_function_calls_alloca)
4556 emit_stack_save (SAVE_FUNCTION, &tem, parm_birth_insn);
4557 emit_stack_restore (SAVE_FUNCTION, tem, NULL_RTX);
4560 /* ??? This should no longer be necessary since stupid is no longer with
4561 us, but there are some parts of the compiler (eg reload_combine, and
4562 sh mach_dep_reorg) that still try and compute their own lifetime info
4563 instead of using the general framework. */
4564 use_return_register ();
4568 get_arg_pointer_save_area (struct function *f)
4570 rtx ret = f->x_arg_pointer_save_area;
4574 ret = assign_stack_local_1 (Pmode, GET_MODE_SIZE (Pmode), 0, f);
4575 f->x_arg_pointer_save_area = ret;
4578 if (f == cfun && ! f->arg_pointer_save_area_init)
4582 /* Save the arg pointer at the beginning of the function. The
4583 generated stack slot may not be a valid memory address, so we
4584 have to check it and fix it if necessary. */
4586 emit_move_insn (validize_mem (ret), virtual_incoming_args_rtx);
4590 push_topmost_sequence ();
4591 emit_insn_after (seq, entry_of_function ());
4592 pop_topmost_sequence ();
4598 /* Extend a vector that records the INSN_UIDs of INSNS
4599 (a list of one or more insns). */
4602 record_insns (rtx insns, VEC(int,heap) **vecp)
4606 for (tmp = insns; tmp != NULL_RTX; tmp = NEXT_INSN (tmp))
4607 VEC_safe_push (int, heap, *vecp, INSN_UID (tmp));
4610 /* Set the locator of the insn chain starting at INSN to LOC. */
4612 set_insn_locators (rtx insn, int loc)
4614 while (insn != NULL_RTX)
4617 INSN_LOCATOR (insn) = loc;
4618 insn = NEXT_INSN (insn);
4622 /* Determine how many INSN_UIDs in VEC are part of INSN. Because we can
4623 be running after reorg, SEQUENCE rtl is possible. */
4626 contains (rtx insn, VEC(int,heap) **vec)
4630 if (NONJUMP_INSN_P (insn)
4631 && GET_CODE (PATTERN (insn)) == SEQUENCE)
4634 for (i = XVECLEN (PATTERN (insn), 0) - 1; i >= 0; i--)
4635 for (j = VEC_length (int, *vec) - 1; j >= 0; --j)
4636 if (INSN_UID (XVECEXP (PATTERN (insn), 0, i))
4637 == VEC_index (int, *vec, j))
4643 for (j = VEC_length (int, *vec) - 1; j >= 0; --j)
4644 if (INSN_UID (insn) == VEC_index (int, *vec, j))
4651 prologue_epilogue_contains (rtx insn)
4653 if (contains (insn, &prologue))
4655 if (contains (insn, &epilogue))
4661 sibcall_epilogue_contains (rtx insn)
4663 if (sibcall_epilogue)
4664 return contains (insn, &sibcall_epilogue);
4669 /* Insert gen_return at the end of block BB. This also means updating
4670 block_for_insn appropriately. */
4673 emit_return_into_block (basic_block bb, rtx line_note)
4675 emit_jump_insn_after (gen_return (), BB_END (bb));
4677 emit_note_copy_after (line_note, PREV_INSN (BB_END (bb)));
4679 #endif /* HAVE_return */
4681 #if defined(HAVE_epilogue) && defined(INCOMING_RETURN_ADDR_RTX)
4683 /* These functions convert the epilogue into a variant that does not
4684 modify the stack pointer. This is used in cases where a function
4685 returns an object whose size is not known until it is computed.
4686 The called function leaves the object on the stack, leaves the
4687 stack depressed, and returns a pointer to the object.
4689 What we need to do is track all modifications and references to the
4690 stack pointer, deleting the modifications and changing the
4691 references to point to the location the stack pointer would have
4692 pointed to had the modifications taken place.
4694 These functions need to be portable so we need to make as few
4695 assumptions about the epilogue as we can. However, the epilogue
4696 basically contains three things: instructions to reset the stack
4697 pointer, instructions to reload registers, possibly including the
4698 frame pointer, and an instruction to return to the caller.
4700 We must be sure of what a relevant epilogue insn is doing. We also
4701 make no attempt to validate the insns we make since if they are
4702 invalid, we probably can't do anything valid. The intent is that
4703 these routines get "smarter" as more and more machines start to use
4704 them and they try operating on different epilogues.
4706 We use the following structure to track what the part of the
4707 epilogue that we've already processed has done. We keep two copies
4708 of the SP equivalence, one for use during the insn we are
4709 processing and one for use in the next insn. The difference is
4710 because one part of a PARALLEL may adjust SP and the other may use
4715 rtx sp_equiv_reg; /* REG that SP is set from, perhaps SP. */
4716 HOST_WIDE_INT sp_offset; /* Offset from SP_EQUIV_REG of present SP. */
4717 rtx new_sp_equiv_reg; /* REG to be used at end of insn. */
4718 HOST_WIDE_INT new_sp_offset; /* Offset to be used at end of insn. */
4719 rtx equiv_reg_src; /* If nonzero, the value that SP_EQUIV_REG
4720 should be set to once we no longer need
4722 rtx const_equiv[FIRST_PSEUDO_REGISTER]; /* Any known constant equivalences
4726 static void handle_epilogue_set (rtx, struct epi_info *);
4727 static void update_epilogue_consts (rtx, rtx, void *);
4728 static void emit_equiv_load (struct epi_info *);
4730 /* Modify INSN, a list of one or more insns that is part of the epilogue, to
4731 no modifications to the stack pointer. Return the new list of insns. */
4734 keep_stack_depressed (rtx insns)
4737 struct epi_info info;
4740 /* If the epilogue is just a single instruction, it must be OK as is. */
4741 if (NEXT_INSN (insns) == NULL_RTX)
4744 /* Otherwise, start a sequence, initialize the information we have, and
4745 process all the insns we were given. */
4748 info.sp_equiv_reg = stack_pointer_rtx;
4750 info.equiv_reg_src = 0;
4752 for (j = 0; j < FIRST_PSEUDO_REGISTER; j++)
4753 info.const_equiv[j] = 0;
4757 while (insn != NULL_RTX)
4759 next = NEXT_INSN (insn);
4768 /* If this insn references the register that SP is equivalent to and
4769 we have a pending load to that register, we must force out the load
4770 first and then indicate we no longer know what SP's equivalent is. */
4771 if (info.equiv_reg_src != 0
4772 && reg_referenced_p (info.sp_equiv_reg, PATTERN (insn)))
4774 emit_equiv_load (&info);
4775 info.sp_equiv_reg = 0;
4778 info.new_sp_equiv_reg = info.sp_equiv_reg;
4779 info.new_sp_offset = info.sp_offset;
4781 /* If this is a (RETURN) and the return address is on the stack,
4782 update the address and change to an indirect jump. */
4783 if (GET_CODE (PATTERN (insn)) == RETURN
4784 || (GET_CODE (PATTERN (insn)) == PARALLEL
4785 && GET_CODE (XVECEXP (PATTERN (insn), 0, 0)) == RETURN))
4787 rtx retaddr = INCOMING_RETURN_ADDR_RTX;
4789 HOST_WIDE_INT offset = 0;
4790 rtx jump_insn, jump_set;
4792 /* If the return address is in a register, we can emit the insn
4793 unchanged. Otherwise, it must be a MEM and we see what the
4794 base register and offset are. In any case, we have to emit any
4795 pending load to the equivalent reg of SP, if any. */
4796 if (REG_P (retaddr))
4798 emit_equiv_load (&info);
4806 gcc_assert (MEM_P (retaddr));
4808 ret_ptr = XEXP (retaddr, 0);
4810 if (REG_P (ret_ptr))
4812 base = gen_rtx_REG (Pmode, REGNO (ret_ptr));
4817 gcc_assert (GET_CODE (ret_ptr) == PLUS
4818 && REG_P (XEXP (ret_ptr, 0))
4819 && GET_CODE (XEXP (ret_ptr, 1)) == CONST_INT);
4820 base = gen_rtx_REG (Pmode, REGNO (XEXP (ret_ptr, 0)));
4821 offset = INTVAL (XEXP (ret_ptr, 1));
4825 /* If the base of the location containing the return pointer
4826 is SP, we must update it with the replacement address. Otherwise,
4827 just build the necessary MEM. */
4828 retaddr = plus_constant (base, offset);
4829 if (base == stack_pointer_rtx)
4830 retaddr = simplify_replace_rtx (retaddr, stack_pointer_rtx,
4831 plus_constant (info.sp_equiv_reg,
4834 retaddr = gen_rtx_MEM (Pmode, retaddr);
4835 MEM_NOTRAP_P (retaddr) = 1;
4837 /* If there is a pending load to the equivalent register for SP
4838 and we reference that register, we must load our address into
4839 a scratch register and then do that load. */
4840 if (info.equiv_reg_src
4841 && reg_overlap_mentioned_p (info.equiv_reg_src, retaddr))
4846 for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++)
4847 if (HARD_REGNO_MODE_OK (regno, Pmode)
4848 && !fixed_regs[regno]
4849 && TEST_HARD_REG_BIT (regs_invalidated_by_call, regno)
4851 (EXIT_BLOCK_PTR->il.rtl->global_live_at_start, regno)
4852 && !refers_to_regno_p (regno,
4853 regno + hard_regno_nregs[regno]
4855 info.equiv_reg_src, NULL)
4856 && info.const_equiv[regno] == 0)
4859 gcc_assert (regno < FIRST_PSEUDO_REGISTER);
4861 reg = gen_rtx_REG (Pmode, regno);
4862 emit_move_insn (reg, retaddr);
4866 emit_equiv_load (&info);
4867 jump_insn = emit_jump_insn (gen_indirect_jump (retaddr));
4869 /* Show the SET in the above insn is a RETURN. */
4870 jump_set = single_set (jump_insn);
4871 gcc_assert (jump_set);
4872 SET_IS_RETURN_P (jump_set) = 1;
4875 /* If SP is not mentioned in the pattern and its equivalent register, if
4876 any, is not modified, just emit it. Otherwise, if neither is set,
4877 replace the reference to SP and emit the insn. If none of those are
4878 true, handle each SET individually. */
4879 else if (!reg_mentioned_p (stack_pointer_rtx, PATTERN (insn))
4880 && (info.sp_equiv_reg == stack_pointer_rtx
4881 || !reg_set_p (info.sp_equiv_reg, insn)))
4883 else if (! reg_set_p (stack_pointer_rtx, insn)
4884 && (info.sp_equiv_reg == stack_pointer_rtx
4885 || !reg_set_p (info.sp_equiv_reg, insn)))
4889 changed = validate_replace_rtx (stack_pointer_rtx,
4890 plus_constant (info.sp_equiv_reg,
4893 gcc_assert (changed);
4897 else if (GET_CODE (PATTERN (insn)) == SET)
4898 handle_epilogue_set (PATTERN (insn), &info);
4899 else if (GET_CODE (PATTERN (insn)) == PARALLEL)
4901 for (j = 0; j < XVECLEN (PATTERN (insn), 0); j++)
4902 if (GET_CODE (XVECEXP (PATTERN (insn), 0, j)) == SET)
4903 handle_epilogue_set (XVECEXP (PATTERN (insn), 0, j), &info);
4908 info.sp_equiv_reg = info.new_sp_equiv_reg;
4909 info.sp_offset = info.new_sp_offset;
4911 /* Now update any constants this insn sets. */
4912 note_stores (PATTERN (insn), update_epilogue_consts, &info);
4916 insns = get_insns ();
4921 /* SET is a SET from an insn in the epilogue. P is a pointer to the epi_info
4922 structure that contains information about what we've seen so far. We
4923 process this SET by either updating that data or by emitting one or
4927 handle_epilogue_set (rtx set, struct epi_info *p)
4929 /* First handle the case where we are setting SP. Record what it is being
4930 set from, which we must be able to determine */
4931 if (reg_set_p (stack_pointer_rtx, set))
4933 gcc_assert (SET_DEST (set) == stack_pointer_rtx);
4935 if (GET_CODE (SET_SRC (set)) == PLUS)
4937 p->new_sp_equiv_reg = XEXP (SET_SRC (set), 0);
4938 if (GET_CODE (XEXP (SET_SRC (set), 1)) == CONST_INT)
4939 p->new_sp_offset = INTVAL (XEXP (SET_SRC (set), 1));
4942 gcc_assert (REG_P (XEXP (SET_SRC (set), 1))
4943 && (REGNO (XEXP (SET_SRC (set), 1))
4944 < FIRST_PSEUDO_REGISTER)
4945 && p->const_equiv[REGNO (XEXP (SET_SRC (set), 1))]);
4947 = INTVAL (p->const_equiv[REGNO (XEXP (SET_SRC (set), 1))]);
4951 p->new_sp_equiv_reg = SET_SRC (set), p->new_sp_offset = 0;
4953 /* If we are adjusting SP, we adjust from the old data. */
4954 if (p->new_sp_equiv_reg == stack_pointer_rtx)
4956 p->new_sp_equiv_reg = p->sp_equiv_reg;
4957 p->new_sp_offset += p->sp_offset;
4960 gcc_assert (p->new_sp_equiv_reg && REG_P (p->new_sp_equiv_reg));
4965 /* Next handle the case where we are setting SP's equivalent
4966 register. We must not already have a value to set it to. We
4967 could update, but there seems little point in handling that case.
4968 Note that we have to allow for the case where we are setting the
4969 register set in the previous part of a PARALLEL inside a single
4970 insn. But use the old offset for any updates within this insn.
4971 We must allow for the case where the register is being set in a
4972 different (usually wider) mode than Pmode). */
4973 else if (p->new_sp_equiv_reg != 0 && reg_set_p (p->new_sp_equiv_reg, set))
4975 gcc_assert (!p->equiv_reg_src
4976 && REG_P (p->new_sp_equiv_reg)
4977 && REG_P (SET_DEST (set))
4978 && (GET_MODE_BITSIZE (GET_MODE (SET_DEST (set)))
4980 && REGNO (p->new_sp_equiv_reg) == REGNO (SET_DEST (set)));
4982 = simplify_replace_rtx (SET_SRC (set), stack_pointer_rtx,
4983 plus_constant (p->sp_equiv_reg,
4987 /* Otherwise, replace any references to SP in the insn to its new value
4988 and emit the insn. */
4991 SET_SRC (set) = simplify_replace_rtx (SET_SRC (set), stack_pointer_rtx,
4992 plus_constant (p->sp_equiv_reg,
4994 SET_DEST (set) = simplify_replace_rtx (SET_DEST (set), stack_pointer_rtx,
4995 plus_constant (p->sp_equiv_reg,
5001 /* Update the tracking information for registers set to constants. */
5004 update_epilogue_consts (rtx dest, rtx x, void *data)
5006 struct epi_info *p = (struct epi_info *) data;
5009 if (!REG_P (dest) || REGNO (dest) >= FIRST_PSEUDO_REGISTER)
5012 /* If we are either clobbering a register or doing a partial set,
5013 show we don't know the value. */
5014 else if (GET_CODE (x) == CLOBBER || ! rtx_equal_p (dest, SET_DEST (x)))
5015 p->const_equiv[REGNO (dest)] = 0;
5017 /* If we are setting it to a constant, record that constant. */
5018 else if (GET_CODE (SET_SRC (x)) == CONST_INT)
5019 p->const_equiv[REGNO (dest)] = SET_SRC (x);
5021 /* If this is a binary operation between a register we have been tracking
5022 and a constant, see if we can compute a new constant value. */
5023 else if (ARITHMETIC_P (SET_SRC (x))
5024 && REG_P (XEXP (SET_SRC (x), 0))
5025 && REGNO (XEXP (SET_SRC (x), 0)) < FIRST_PSEUDO_REGISTER
5026 && p->const_equiv[REGNO (XEXP (SET_SRC (x), 0))] != 0
5027 && GET_CODE (XEXP (SET_SRC (x), 1)) == CONST_INT
5028 && 0 != (new = simplify_binary_operation
5029 (GET_CODE (SET_SRC (x)), GET_MODE (dest),
5030 p->const_equiv[REGNO (XEXP (SET_SRC (x), 0))],
5031 XEXP (SET_SRC (x), 1)))
5032 && GET_CODE (new) == CONST_INT)
5033 p->const_equiv[REGNO (dest)] = new;
5035 /* Otherwise, we can't do anything with this value. */
5037 p->const_equiv[REGNO (dest)] = 0;
5040 /* Emit an insn to do the load shown in p->equiv_reg_src, if needed. */
5043 emit_equiv_load (struct epi_info *p)
5045 if (p->equiv_reg_src != 0)
5047 rtx dest = p->sp_equiv_reg;
5049 if (GET_MODE (p->equiv_reg_src) != GET_MODE (dest))
5050 dest = gen_rtx_REG (GET_MODE (p->equiv_reg_src),
5051 REGNO (p->sp_equiv_reg));
5053 emit_move_insn (dest, p->equiv_reg_src);
5054 p->equiv_reg_src = 0;
5059 /* Generate the prologue and epilogue RTL if the machine supports it. Thread
5060 this into place with notes indicating where the prologue ends and where
5061 the epilogue begins. Update the basic block information when possible. */
5064 thread_prologue_and_epilogue_insns (rtx f ATTRIBUTE_UNUSED)
5068 #if defined (HAVE_sibcall_epilogue) || defined (HAVE_epilogue) || defined (HAVE_return) || defined (HAVE_prologue)
5071 #ifdef HAVE_prologue
5072 rtx prologue_end = NULL_RTX;
5074 #if defined (HAVE_epilogue) || defined(HAVE_return)
5075 rtx epilogue_end = NULL_RTX;
5079 #ifdef HAVE_prologue
5083 seq = gen_prologue ();
5086 /* Retain a map of the prologue insns. */
5087 record_insns (seq, &prologue);
5088 prologue_end = emit_note (NOTE_INSN_PROLOGUE_END);
5092 set_insn_locators (seq, prologue_locator);
5094 /* Can't deal with multiple successors of the entry block
5095 at the moment. Function should always have at least one
5097 gcc_assert (single_succ_p (ENTRY_BLOCK_PTR));
5099 insert_insn_on_edge (seq, single_succ_edge (ENTRY_BLOCK_PTR));
5104 /* If the exit block has no non-fake predecessors, we don't need
5106 FOR_EACH_EDGE (e, ei, EXIT_BLOCK_PTR->preds)
5107 if ((e->flags & EDGE_FAKE) == 0)
5113 if (optimize && HAVE_return)
5115 /* If we're allowed to generate a simple return instruction,
5116 then by definition we don't need a full epilogue. Examine
5117 the block that falls through to EXIT. If it does not
5118 contain any code, examine its predecessors and try to
5119 emit (conditional) return instructions. */
5124 FOR_EACH_EDGE (e, ei, EXIT_BLOCK_PTR->preds)
5125 if (e->flags & EDGE_FALLTHRU)
5131 /* Verify that there are no active instructions in the last block. */
5132 label = BB_END (last);
5133 while (label && !LABEL_P (label))
5135 if (active_insn_p (label))
5137 label = PREV_INSN (label);
5140 if (BB_HEAD (last) == label && LABEL_P (label))
5143 rtx epilogue_line_note = NULL_RTX;
5145 /* Locate the line number associated with the closing brace,
5146 if we can find one. */
5147 for (seq = get_last_insn ();
5148 seq && ! active_insn_p (seq);
5149 seq = PREV_INSN (seq))
5150 if (NOTE_P (seq) && NOTE_LINE_NUMBER (seq) > 0)
5152 epilogue_line_note = seq;
5156 for (ei2 = ei_start (last->preds); (e = ei_safe_edge (ei2)); )
5158 basic_block bb = e->src;
5161 if (bb == ENTRY_BLOCK_PTR)
5168 if (!JUMP_P (jump) || JUMP_LABEL (jump) != label)
5174 /* If we have an unconditional jump, we can replace that
5175 with a simple return instruction. */
5176 if (simplejump_p (jump))
5178 emit_return_into_block (bb, epilogue_line_note);
5182 /* If we have a conditional jump, we can try to replace
5183 that with a conditional return instruction. */
5184 else if (condjump_p (jump))
5186 if (! redirect_jump (jump, 0, 0))
5192 /* If this block has only one successor, it both jumps
5193 and falls through to the fallthru block, so we can't
5195 if (single_succ_p (bb))
5207 /* Fix up the CFG for the successful change we just made. */
5208 redirect_edge_succ (e, EXIT_BLOCK_PTR);
5211 /* Emit a return insn for the exit fallthru block. Whether
5212 this is still reachable will be determined later. */
5214 emit_barrier_after (BB_END (last));
5215 emit_return_into_block (last, epilogue_line_note);
5216 epilogue_end = BB_END (last);
5217 single_succ_edge (last)->flags &= ~EDGE_FALLTHRU;
5222 /* Find the edge that falls through to EXIT. Other edges may exist
5223 due to RETURN instructions, but those don't need epilogues.
5224 There really shouldn't be a mixture -- either all should have
5225 been converted or none, however... */
5227 FOR_EACH_EDGE (e, ei, EXIT_BLOCK_PTR->preds)
5228 if (e->flags & EDGE_FALLTHRU)
5233 #ifdef HAVE_epilogue
5237 epilogue_end = emit_note (NOTE_INSN_EPILOGUE_BEG);
5239 seq = gen_epilogue ();
5241 #ifdef INCOMING_RETURN_ADDR_RTX
5242 /* If this function returns with the stack depressed and we can support
5243 it, massage the epilogue to actually do that. */
5244 if (TREE_CODE (TREE_TYPE (current_function_decl)) == FUNCTION_TYPE
5245 && TYPE_RETURNS_STACK_DEPRESSED (TREE_TYPE (current_function_decl)))
5246 seq = keep_stack_depressed (seq);
5249 emit_jump_insn (seq);
5251 /* Retain a map of the epilogue insns. */
5252 record_insns (seq, &epilogue);
5253 set_insn_locators (seq, epilogue_locator);
5258 insert_insn_on_edge (seq, e);
5266 if (! next_active_insn (BB_END (e->src)))
5268 /* We have a fall-through edge to the exit block, the source is not
5269 at the end of the function, and there will be an assembler epilogue
5270 at the end of the function.
5271 We can't use force_nonfallthru here, because that would try to
5272 use return. Inserting a jump 'by hand' is extremely messy, so
5273 we take advantage of cfg_layout_finalize using
5274 fixup_fallthru_exit_predecessor. */
5275 cfg_layout_initialize (0);
5276 FOR_EACH_BB (cur_bb)
5277 if (cur_bb->index >= 0 && cur_bb->next_bb->index >= 0)
5278 cur_bb->aux = cur_bb->next_bb;
5279 cfg_layout_finalize ();
5284 commit_edge_insertions ();
5286 #ifdef HAVE_sibcall_epilogue
5287 /* Emit sibling epilogues before any sibling call sites. */
5288 for (ei = ei_start (EXIT_BLOCK_PTR->preds); (e = ei_safe_edge (ei)); )
5290 basic_block bb = e->src;
5291 rtx insn = BB_END (bb);
5294 || ! SIBLING_CALL_P (insn))
5301 emit_insn (gen_sibcall_epilogue ());
5305 /* Retain a map of the epilogue insns. Used in life analysis to
5306 avoid getting rid of sibcall epilogue insns. Do this before we
5307 actually emit the sequence. */
5308 record_insns (seq, &sibcall_epilogue);
5309 set_insn_locators (seq, epilogue_locator);
5311 emit_insn_before (seq, insn);
5316 #ifdef HAVE_prologue
5317 /* This is probably all useless now that we use locators. */
5322 /* GDB handles `break f' by setting a breakpoint on the first
5323 line note after the prologue. Which means (1) that if
5324 there are line number notes before where we inserted the
5325 prologue we should move them, and (2) we should generate a
5326 note before the end of the first basic block, if there isn't
5329 ??? This behavior is completely broken when dealing with
5330 multiple entry functions. We simply place the note always
5331 into first basic block and let alternate entry points
5335 for (insn = prologue_end; insn; insn = prev)
5337 prev = PREV_INSN (insn);
5338 if (NOTE_P (insn) && NOTE_LINE_NUMBER (insn) > 0)
5340 /* Note that we cannot reorder the first insn in the
5341 chain, since rest_of_compilation relies on that
5342 remaining constant. */
5345 reorder_insns (insn, insn, prologue_end);
5349 /* Find the last line number note in the first block. */
5350 for (insn = BB_END (ENTRY_BLOCK_PTR->next_bb);
5351 insn != prologue_end && insn;
5352 insn = PREV_INSN (insn))
5353 if (NOTE_P (insn) && NOTE_LINE_NUMBER (insn) > 0)
5356 /* If we didn't find one, make a copy of the first line number
5360 for (insn = next_active_insn (prologue_end);
5362 insn = PREV_INSN (insn))
5363 if (NOTE_P (insn) && NOTE_LINE_NUMBER (insn) > 0)
5365 emit_note_copy_after (insn, prologue_end);
5371 #ifdef HAVE_epilogue
5376 /* Similarly, move any line notes that appear after the epilogue.
5377 There is no need, however, to be quite so anal about the existence
5378 of such a note. Also move the NOTE_INSN_FUNCTION_END and (possibly)
5379 NOTE_INSN_FUNCTION_BEG notes, as those can be relevant for debug
5381 for (insn = epilogue_end; insn; insn = next)
5383 next = NEXT_INSN (insn);
5385 && (NOTE_LINE_NUMBER (insn) > 0
5386 || NOTE_LINE_NUMBER (insn) == NOTE_INSN_FUNCTION_BEG
5387 || NOTE_LINE_NUMBER (insn) == NOTE_INSN_FUNCTION_END))
5388 reorder_insns (insn, insn, PREV_INSN (epilogue_end));
5394 /* Reposition the prologue-end and epilogue-begin notes after instruction
5395 scheduling and delayed branch scheduling. */
5398 reposition_prologue_and_epilogue_notes (rtx f ATTRIBUTE_UNUSED)
5400 #if defined (HAVE_prologue) || defined (HAVE_epilogue)
5401 rtx insn, last, note;
5404 if ((len = VEC_length (int, prologue)) > 0)
5408 /* Scan from the beginning until we reach the last prologue insn.
5409 We apparently can't depend on basic_block_{head,end} after
5411 for (insn = f; insn; insn = NEXT_INSN (insn))
5415 if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_PROLOGUE_END)
5418 else if (contains (insn, &prologue))
5428 /* Find the prologue-end note if we haven't already, and
5429 move it to just after the last prologue insn. */
5432 for (note = last; (note = NEXT_INSN (note));)
5434 && NOTE_LINE_NUMBER (note) == NOTE_INSN_PROLOGUE_END)
5438 /* Avoid placing note between CODE_LABEL and BASIC_BLOCK note. */
5440 last = NEXT_INSN (last);
5441 reorder_insns (note, note, last);
5445 if ((len = VEC_length (int, epilogue)) > 0)
5449 /* Scan from the end until we reach the first epilogue insn.
5450 We apparently can't depend on basic_block_{head,end} after
5452 for (insn = get_last_insn (); insn; insn = PREV_INSN (insn))
5456 if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_EPILOGUE_BEG)
5459 else if (contains (insn, &epilogue))
5469 /* Find the epilogue-begin note if we haven't already, and
5470 move it to just before the first epilogue insn. */
5473 for (note = insn; (note = PREV_INSN (note));)
5475 && NOTE_LINE_NUMBER (note) == NOTE_INSN_EPILOGUE_BEG)
5479 if (PREV_INSN (last) != note)
5480 reorder_insns (note, note, PREV_INSN (last));
5483 #endif /* HAVE_prologue or HAVE_epilogue */
5486 /* Resets insn_block_boundaries array. */
5489 reset_block_changes (void)
5491 VARRAY_TREE_INIT (cfun->ib_boundaries_block, 100, "ib_boundaries_block");
5492 VARRAY_PUSH_TREE (cfun->ib_boundaries_block, NULL_TREE);
5495 /* Record the boundary for BLOCK. */
5497 record_block_change (tree block)
5505 if(!cfun->ib_boundaries_block)
5508 last_block = VARRAY_TOP_TREE (cfun->ib_boundaries_block);
5509 VARRAY_POP (cfun->ib_boundaries_block);
5511 for (i = VARRAY_ACTIVE_SIZE (cfun->ib_boundaries_block); i < n; i++)
5512 VARRAY_PUSH_TREE (cfun->ib_boundaries_block, last_block);
5514 VARRAY_PUSH_TREE (cfun->ib_boundaries_block, block);
5517 /* Finishes record of boundaries. */
5518 void finalize_block_changes (void)
5520 record_block_change (DECL_INITIAL (current_function_decl));
5523 /* For INSN return the BLOCK it belongs to. */
5525 check_block_change (rtx insn, tree *block)
5527 unsigned uid = INSN_UID (insn);
5529 if (uid >= VARRAY_ACTIVE_SIZE (cfun->ib_boundaries_block))
5532 *block = VARRAY_TREE (cfun->ib_boundaries_block, uid);
5535 /* Releases the ib_boundaries_block records. */
5537 free_block_changes (void)
5539 cfun->ib_boundaries_block = NULL;
5542 /* Returns the name of the current function. */
5544 current_function_name (void)
5546 return lang_hooks.decl_printable_name (cfun->decl, 2);
5551 rest_of_handle_check_leaf_regs (void)
5553 #ifdef LEAF_REGISTERS
5554 current_function_uses_only_leaf_regs
5555 = optimize > 0 && only_leaf_regs_used () && leaf_function_p ();
5559 struct tree_opt_pass pass_leaf_regs =
5563 rest_of_handle_check_leaf_regs, /* execute */
5566 0, /* static_pass_number */
5568 0, /* properties_required */
5569 0, /* properties_provided */
5570 0, /* properties_destroyed */
5571 0, /* todo_flags_start */
5572 0, /* todo_flags_finish */
5577 #include "gt-function.h"