PR target/47643

[pf3gnuchains/gcc-fork.git] / gcc / doc / invoke.texi

@c Copyright (C) 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
@c 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
@c Free Software Foundation, Inc.
@c This is part of the GCC manual.
@c For copying conditions, see the file gcc.texi.

@ignore
@c man begin INCLUDE
@include gcc-vers.texi
@c man end

@c man begin COPYRIGHT
Copyright @copyright{} 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Free Software Foundation, Inc.

Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3 or
any later version published by the Free Software Foundation; with the
Invariant Sections being ``GNU General Public License'' and ``Funding
Free Software'', the Front-Cover texts being (a) (see below), and with
the Back-Cover Texts being (b) (see below).  A copy of the license is
included in the gfdl(7) man page.

(a) The FSF's Front-Cover Text is:

     A GNU Manual

(b) The FSF's Back-Cover Text is:

     You have freedom to copy and modify this GNU Manual, like GNU
     software.  Copies published by the Free Software Foundation raise
     funds for GNU development.
@c man end
@c Set file name and title for the man page.
@setfilename gcc
@settitle GNU project C and C++ compiler
@c man begin SYNOPSIS
gcc [@option{-c}|@option{-S}|@option{-E}] [@option{-std=}@var{standard}]
    [@option{-g}] [@option{-pg}] [@option{-O}@var{level}]
    [@option{-W}@var{warn}@dots{}] [@option{-pedantic}]
    [@option{-I}@var{dir}@dots{}] [@option{-L}@var{dir}@dots{}]
    [@option{-D}@var{macro}[=@var{defn}]@dots{}] [@option{-U}@var{macro}]
    [@option{-f}@var{option}@dots{}] [@option{-m}@var{machine-option}@dots{}]
    [@option{-o} @var{outfile}] [@@@var{file}] @var{infile}@dots{}

Only the most useful options are listed here; see below for the
remainder.  @samp{g++} accepts mostly the same options as @samp{gcc}.
@c man end
@c man begin SEEALSO
gpl(7), gfdl(7), fsf-funding(7),
cpp(1), gcov(1), as(1), ld(1), gdb(1), adb(1), dbx(1), sdb(1)
and the Info entries for @file{gcc}, @file{cpp}, @file{as},
@file{ld}, @file{binutils} and @file{gdb}.
@c man end
@c man begin BUGS
For instructions on reporting bugs, see
@w{@value{BUGURL}}.
@c man end
@c man begin AUTHOR
See the Info entry for @command{gcc}, or
@w{@uref{http://gcc.gnu.org/onlinedocs/gcc/Contributors.html}},
for contributors to GCC@.
@c man end
@end ignore

@node Invoking GCC
@chapter GCC Command Options
@cindex GCC command options
@cindex command options
@cindex options, GCC command

@c man begin DESCRIPTION
When you invoke GCC, it normally does preprocessing, compilation,
assembly and linking.  The ``overall options'' allow you to stop this
process at an intermediate stage.  For example, the @option{-c} option
says not to run the linker.  Then the output consists of object files
output by the assembler.

Other options are passed on to one stage of processing.  Some options
control the preprocessor and others the compiler itself.  Yet other
options control the assembler and linker; most of these are not
documented here, since you rarely need to use any of them.

@cindex C compilation options
Most of the command line options that you can use with GCC are useful
for C programs; when an option is only useful with another language
(usually C++), the explanation says so explicitly.  If the description
for a particular option does not mention a source language, you can use
that option with all supported languages.

@cindex C++ compilation options
@xref{Invoking G++,,Compiling C++ Programs}, for a summary of special
options for compiling C++ programs.

@cindex grouping options
@cindex options, grouping
The @command{gcc} program accepts options and file names as operands.  Many
options have multi-letter names; therefore multiple single-letter options
may @emph{not} be grouped: @option{-dv} is very different from @w{@samp{-d
-v}}.

@cindex order of options
@cindex options, order
You can mix options and other arguments.  For the most part, the order
you use doesn't matter.  Order does matter when you use several
options of the same kind; for example, if you specify @option{-L} more
than once, the directories are searched in the order specified.  Also,
the placement of the @option{-l} option is significant.

Many options have long names starting with @samp{-f} or with
@samp{-W}---for example,
@option{-fmove-loop-invariants}, @option{-Wformat} and so on.  Most of
these have both positive and negative forms; the negative form of
@option{-ffoo} would be @option{-fno-foo}.  This manual documents
only one of these two forms, whichever one is not the default.

@c man end

@xref{Option Index}, for an index to GCC's options.

@menu
* Option Summary::      Brief list of all options, without explanations.
* Overall Options::     Controlling the kind of output:
                        an executable, object files, assembler files,
                        or preprocessed source.
* Invoking G++::        Compiling C++ programs.
* C Dialect Options::   Controlling the variant of C language compiled.
* C++ Dialect Options:: Variations on C++.
* Objective-C and Objective-C++ Dialect Options:: Variations on Objective-C
                        and Objective-C++.
* Language Independent Options:: Controlling how diagnostics should be
                        formatted.
* Warning Options::     How picky should the compiler be?
* Debugging Options::   Symbol tables, measurements, and debugging dumps.
* Optimize Options::    How much optimization?
* Preprocessor Options:: Controlling header files and macro definitions.
                         Also, getting dependency information for Make.
* Assembler Options::   Passing options to the assembler.
* Link Options::        Specifying libraries and so on.
* Directory Options::   Where to find header files and libraries.
                        Where to find the compiler executable files.
* Spec Files::          How to pass switches to sub-processes.
* Target Options::      Running a cross-compiler, or an old version of GCC.
* Submodel Options::    Specifying minor hardware or convention variations,
                        such as 68010 vs 68020.
* Code Gen Options::    Specifying conventions for function calls, data layout
                        and register usage.
* Environment Variables:: Env vars that affect GCC.
* Precompiled Headers:: Compiling a header once, and using it many times.
@end menu

@c man begin OPTIONS

@node Option Summary
@section Option Summary

Here is a summary of all the options, grouped by type.  Explanations are
in the following sections.

@table @emph
@item Overall Options
@xref{Overall Options,,Options Controlling the Kind of Output}.
@gccoptlist{-c  -S  -E  -o @var{file}  -no-canonical-prefixes  @gol
-pipe  -pass-exit-codes  @gol
-x @var{language}  -v  -###  --help@r{[}=@var{class}@r{[},@dots{}@r{]]}  --target-help  @gol
--version -wrapper @@@var{file} -fplugin=@var{file} -fplugin-arg-@var{name}=@var{arg}  @gol
-fdump-ada-spec@r{[}-slim@r{]} -fdump-go-spec=@var{file}}

@item C Language Options
@xref{C Dialect Options,,Options Controlling C Dialect}.
@gccoptlist{-ansi  -std=@var{standard}  -fgnu89-inline @gol
-aux-info @var{filename} -fallow-parameterless-variadic-functions @gol
-fno-asm  -fno-builtin  -fno-builtin-@var{function} @gol
-fhosted  -ffreestanding -fopenmp -fms-extensions -fplan9-extensions @gol
-trigraphs  -no-integrated-cpp  -traditional  -traditional-cpp @gol
-fallow-single-precision  -fcond-mismatch -flax-vector-conversions @gol
-fsigned-bitfields  -fsigned-char @gol
-funsigned-bitfields  -funsigned-char}

@item C++ Language Options
@xref{C++ Dialect Options,,Options Controlling C++ Dialect}.
@gccoptlist{-fabi-version=@var{n}  -fno-access-control  -fcheck-new @gol
-fconserve-space  -fconstexpr-depth=@var{n}  -ffriend-injection @gol
-fno-elide-constructors @gol
-fno-enforce-eh-specs @gol
-ffor-scope  -fno-for-scope  -fno-gnu-keywords @gol
-fno-implicit-templates @gol
-fno-implicit-inline-templates @gol
-fno-implement-inlines  -fms-extensions @gol
-fno-nonansi-builtins  -fnothrow-opt  -fno-operator-names @gol
-fno-optional-diags  -fpermissive @gol
-fno-pretty-templates @gol
-frepo  -fno-rtti  -fstats  -ftemplate-depth=@var{n} @gol
-fno-threadsafe-statics -fuse-cxa-atexit  -fno-weak  -nostdinc++ @gol
-fno-default-inline  -fvisibility-inlines-hidden @gol
-fvisibility-ms-compat @gol
-Wabi  -Wconversion-null  -Wctor-dtor-privacy @gol
-Wnoexcept -Wnon-virtual-dtor  -Wreorder @gol
-Weffc++  -Wstrict-null-sentinel @gol
-Wno-non-template-friend  -Wold-style-cast @gol
-Woverloaded-virtual  -Wno-pmf-conversions @gol
-Wsign-promo -Wzero-as-null-pointer-constant}

@item Objective-C and Objective-C++ Language Options
@xref{Objective-C and Objective-C++ Dialect Options,,Options Controlling
Objective-C and Objective-C++ Dialects}.
@gccoptlist{-fconstant-string-class=@var{class-name} @gol
-fgnu-runtime  -fnext-runtime @gol
-fno-nil-receivers @gol
-fobjc-abi-version=@var{n} @gol
-fobjc-call-cxx-cdtors @gol
-fobjc-direct-dispatch @gol
-fobjc-exceptions @gol
-fobjc-gc @gol
-fobjc-nilcheck @gol
-fobjc-std=objc1 @gol
-freplace-objc-classes @gol
-fzero-link @gol
-gen-decls @gol
-Wassign-intercept @gol
-Wno-protocol  -Wselector @gol
-Wstrict-selector-match @gol
-Wundeclared-selector}

@item Language Independent Options
@xref{Language Independent Options,,Options to Control Diagnostic Messages Formatting}.
@gccoptlist{-fmessage-length=@var{n}  @gol
-fdiagnostics-show-location=@r{[}once@r{|}every-line@r{]}  @gol
-fno-diagnostics-show-option}

@item Warning Options
@xref{Warning Options,,Options to Request or Suppress Warnings}.
@gccoptlist{-fsyntax-only  -fmax-errors=@var{n}  -pedantic @gol
-pedantic-errors @gol
-w  -Wextra  -Wall  -Waddress  -Waggregate-return  -Warray-bounds @gol
-Wno-attributes -Wno-builtin-macro-redefined @gol
-Wc++-compat -Wc++11-compat -Wcast-align  -Wcast-qual  @gol
-Wchar-subscripts -Wclobbered  -Wcomment @gol
-Wconversion  -Wcoverage-mismatch  -Wno-cpp  -Wno-deprecated  @gol
-Wno-deprecated-declarations -Wdisabled-optimization  @gol
-Wno-div-by-zero -Wdouble-promotion -Wempty-body  -Wenum-compare @gol
-Wno-endif-labels -Werror  -Werror=* @gol
-Wfatal-errors  -Wfloat-equal  -Wformat  -Wformat=2 @gol
-Wno-format-contains-nul -Wno-format-extra-args -Wformat-nonliteral @gol
-Wformat-security  -Wformat-y2k @gol
-Wframe-larger-than=@var{len} -Wno-free-nonheap-object -Wjump-misses-init @gol
-Wignored-qualifiers @gol
-Wimplicit  -Wimplicit-function-declaration  -Wimplicit-int @gol
-Winit-self  -Winline -Wmaybe-uninitialized @gol
-Wno-int-to-pointer-cast -Wno-invalid-offsetof @gol
-Winvalid-pch -Wlarger-than=@var{len}  -Wunsafe-loop-optimizations @gol
-Wlogical-op -Wlong-long @gol
-Wmain -Wmaybe-uninitialized -Wmissing-braces  -Wmissing-field-initializers @gol
-Wmissing-format-attribute  -Wmissing-include-dirs @gol
-Wno-mudflap @gol
-Wno-multichar  -Wnonnull  -Wno-overflow @gol
-Woverlength-strings  -Wpacked  -Wpacked-bitfield-compat  -Wpadded @gol
-Wparentheses  -Wpedantic-ms-format -Wno-pedantic-ms-format @gol
-Wpointer-arith  -Wno-pointer-to-int-cast @gol
-Wredundant-decls @gol
-Wreturn-type  -Wsequence-point  -Wshadow @gol
-Wsign-compare  -Wsign-conversion  -Wstack-protector @gol
-Wstack-usage=@var{len} -Wstrict-aliasing -Wstrict-aliasing=n @gol
-Wstrict-overflow -Wstrict-overflow=@var{n} @gol
-Wsuggest-attribute=@r{[}pure@r{|}const@r{|}noreturn@r{]} @gol
-Wswitch  -Wswitch-default  -Wswitch-enum -Wsync-nand @gol
-Wsystem-headers  -Wtrampolines  -Wtrigraphs  -Wtype-limits  -Wundef @gol
-Wuninitialized  -Wunknown-pragmas  -Wno-pragmas @gol
-Wunsuffixed-float-constants  -Wunused  -Wunused-function @gol
-Wunused-label  -Wunused-local-typedefs -Wunused-parameter @gol
-Wno-unused-result -Wunused-value @gol -Wunused-variable @gol
-Wunused-but-set-parameter -Wunused-but-set-variable @gol
-Wvariadic-macros -Wvector-operation-performance -Wvla 
-Wvolatile-register-var  -Wwrite-strings}

@item C and Objective-C-only Warning Options
@gccoptlist{-Wbad-function-cast  -Wmissing-declarations @gol
-Wmissing-parameter-type  -Wmissing-prototypes  -Wnested-externs @gol
-Wold-style-declaration  -Wold-style-definition @gol
-Wstrict-prototypes  -Wtraditional  -Wtraditional-conversion @gol
-Wdeclaration-after-statement -Wpointer-sign}

@item Debugging Options
@xref{Debugging Options,,Options for Debugging Your Program or GCC}.
@gccoptlist{-d@var{letters}  -dumpspecs  -dumpmachine  -dumpversion @gol
-fdbg-cnt-list -fdbg-cnt=@var{counter-value-list} @gol
-fdisable-ipa-@var{pass_name} @gol
-fdisable-rtl-@var{pass_name} @gol
-fdisable-rtl-@var{pass-name}=@var{range-list} @gol
-fdisable-tree-@var{pass_name} @gol
-fdisable-tree-@var{pass-name}=@var{range-list} @gol
-fdump-noaddr -fdump-unnumbered -fdump-unnumbered-links @gol
-fdump-translation-unit@r{[}-@var{n}@r{]} @gol
-fdump-class-hierarchy@r{[}-@var{n}@r{]} @gol
-fdump-ipa-all -fdump-ipa-cgraph -fdump-ipa-inline @gol
-fdump-passes @gol
-fdump-statistics @gol
-fdump-tree-all @gol
-fdump-tree-original@r{[}-@var{n}@r{]}  @gol
-fdump-tree-optimized@r{[}-@var{n}@r{]} @gol
-fdump-tree-cfg -fdump-tree-vcg -fdump-tree-alias @gol
-fdump-tree-ch @gol
-fdump-tree-ssa@r{[}-@var{n}@r{]} -fdump-tree-pre@r{[}-@var{n}@r{]} @gol
-fdump-tree-ccp@r{[}-@var{n}@r{]} -fdump-tree-dce@r{[}-@var{n}@r{]} @gol
-fdump-tree-gimple@r{[}-raw@r{]} -fdump-tree-mudflap@r{[}-@var{n}@r{]} @gol
-fdump-tree-dom@r{[}-@var{n}@r{]} @gol
-fdump-tree-dse@r{[}-@var{n}@r{]} @gol
-fdump-tree-phiprop@r{[}-@var{n}@r{]} @gol
-fdump-tree-phiopt@r{[}-@var{n}@r{]} @gol
-fdump-tree-forwprop@r{[}-@var{n}@r{]} @gol
-fdump-tree-copyrename@r{[}-@var{n}@r{]} @gol
-fdump-tree-nrv -fdump-tree-vect @gol
-fdump-tree-sink @gol
-fdump-tree-sra@r{[}-@var{n}@r{]} @gol
-fdump-tree-forwprop@r{[}-@var{n}@r{]} @gol
-fdump-tree-fre@r{[}-@var{n}@r{]} @gol
-fdump-tree-vrp@r{[}-@var{n}@r{]} @gol
-ftree-vectorizer-verbose=@var{n} @gol
-fdump-tree-storeccp@r{[}-@var{n}@r{]} @gol
-fdump-final-insns=@var{file} @gol
-fcompare-debug@r{[}=@var{opts}@r{]}  -fcompare-debug-second @gol
-feliminate-dwarf2-dups -feliminate-unused-debug-types @gol
-feliminate-unused-debug-symbols -femit-class-debug-always @gol
-fenable-@var{kind}-@var{pass} @gol
-fenable-@var{kind}-@var{pass}=@var{range-list} @gol
-fdebug-types-section @gol
-fmem-report -fpre-ipa-mem-report -fpost-ipa-mem-report -fprofile-arcs @gol
-frandom-seed=@var{string} -fsched-verbose=@var{n} @gol
-fsel-sched-verbose -fsel-sched-dump-cfg -fsel-sched-pipelining-verbose @gol
-fstack-usage  -ftest-coverage  -ftime-report -fvar-tracking @gol
-fvar-tracking-assignments  -fvar-tracking-assignments-toggle @gol
-g  -g@var{level}  -gtoggle  -gcoff  -gdwarf-@var{version} @gol
-ggdb  -grecord-gcc-switches  -gno-record-gcc-switches @gol
-gstabs  -gstabs+  -gstrict-dwarf  -gno-strict-dwarf @gol
-gvms  -gxcoff  -gxcoff+ @gol
-fno-merge-debug-strings -fno-dwarf2-cfi-asm @gol
-fdebug-prefix-map=@var{old}=@var{new} @gol
-femit-struct-debug-baseonly -femit-struct-debug-reduced @gol
-femit-struct-debug-detailed@r{[}=@var{spec-list}@r{]} @gol
-p  -pg  -print-file-name=@var{library}  -print-libgcc-file-name @gol
-print-multi-directory  -print-multi-lib  -print-multi-os-directory @gol
-print-prog-name=@var{program}  -print-search-dirs  -Q @gol
-print-sysroot -print-sysroot-headers-suffix @gol
-save-temps -save-temps=cwd -save-temps=obj -time@r{[}=@var{file}@r{]}}

@item Optimization Options
@xref{Optimize Options,,Options that Control Optimization}.
@gccoptlist{-falign-functions[=@var{n}] -falign-jumps[=@var{n}] @gol
-falign-labels[=@var{n}] -falign-loops[=@var{n}] -fassociative-math @gol
-fauto-inc-dec -fbranch-probabilities -fbranch-target-load-optimize @gol
-fbranch-target-load-optimize2 -fbtr-bb-exclusive -fcaller-saves @gol
-fcheck-data-deps -fcombine-stack-adjustments -fconserve-stack @gol
-fcompare-elim -fcprop-registers -fcrossjumping @gol
-fcse-follow-jumps -fcse-skip-blocks -fcx-fortran-rules @gol
-fcx-limited-range @gol
-fdata-sections -fdce -fdce -fdelayed-branch @gol
-fdelete-null-pointer-checks -fdse -fdevirtualize -fdse @gol
-fearly-inlining -fipa-sra -fexpensive-optimizations -ffat-lto-objects @gol
-ffast-math -ffinite-math-only -ffloat-store -fexcess-precision=@var{style} @gol
-fforward-propagate -ffp-contract=@var{style} -ffunction-sections @gol
-fgcse -fgcse-after-reload -fgcse-las -fgcse-lm -fgraphite-identity @gol
-fgcse-sm -fif-conversion -fif-conversion2 -findirect-inlining @gol
-finline-functions -finline-functions-called-once -finline-limit=@var{n} @gol
-finline-small-functions -fipa-cp -fipa-cp-clone -fipa-matrix-reorg @gol
-fipa-pta -fipa-profile -fipa-pure-const -fipa-reference @gol
-fira-algorithm=@var{algorithm} @gol
-fira-region=@var{region} @gol
-fira-loop-pressure -fno-ira-share-save-slots @gol
-fno-ira-share-spill-slots -fira-verbose=@var{n} @gol
-fivopts -fkeep-inline-functions -fkeep-static-consts @gol
-floop-block -floop-flatten -floop-interchange -floop-strip-mine @gol
-floop-parallelize-all -flto -flto-compression-level @gol
-flto-partition=@var{alg} -flto-report -fmerge-all-constants @gol
-fmerge-constants -fmodulo-sched -fmodulo-sched-allow-regmoves @gol
-fmove-loop-invariants fmudflap -fmudflapir -fmudflapth -fno-branch-count-reg @gol
-fno-default-inline @gol
-fno-defer-pop -fno-function-cse -fno-guess-branch-probability @gol
-fno-inline -fno-math-errno -fno-peephole -fno-peephole2 @gol
-fno-sched-interblock -fno-sched-spec -fno-signed-zeros @gol
-fno-toplevel-reorder -fno-trapping-math -fno-zero-initialized-in-bss @gol
-fomit-frame-pointer -foptimize-register-move -foptimize-sibling-calls @gol
-fpartial-inlining -fpeel-loops -fpredictive-commoning @gol
-fprefetch-loop-arrays @gol
-fprofile-correction -fprofile-dir=@var{path} -fprofile-generate @gol
-fprofile-generate=@var{path} @gol
-fprofile-use -fprofile-use=@var{path} -fprofile-values @gol
-freciprocal-math -free -fregmove -frename-registers -freorder-blocks @gol
-freorder-blocks-and-partition -freorder-functions @gol
-frerun-cse-after-loop -freschedule-modulo-scheduled-loops @gol
-frounding-math -fsched2-use-superblocks -fsched-pressure @gol
-fsched-spec-load -fsched-spec-load-dangerous @gol
-fsched-stalled-insns-dep[=@var{n}] -fsched-stalled-insns[=@var{n}] @gol
-fsched-group-heuristic -fsched-critical-path-heuristic @gol
-fsched-spec-insn-heuristic -fsched-rank-heuristic @gol
-fsched-last-insn-heuristic -fsched-dep-count-heuristic @gol
-fschedule-insns -fschedule-insns2 -fsection-anchors @gol
-fselective-scheduling -fselective-scheduling2 @gol
-fsel-sched-pipelining -fsel-sched-pipelining-outer-loops @gol
-fshrink-wrap -fsignaling-nans -fsingle-precision-constant @gol
-fsplit-ivs-in-unroller -fsplit-wide-types -fstack-protector @gol
-fstack-protector-all -fstrict-aliasing -fstrict-overflow @gol
-fthread-jumps -ftracer -ftree-bit-ccp @gol
-ftree-builtin-call-dce -ftree-ccp -ftree-ch -ftree-copy-prop @gol
-ftree-copyrename -ftree-dce -ftree-dominator-opts -ftree-dse @gol
-ftree-forwprop -ftree-fre -ftree-loop-if-convert @gol
-ftree-loop-if-convert-stores -ftree-loop-im @gol
-ftree-phiprop -ftree-loop-distribution -ftree-loop-distribute-patterns @gol
-ftree-loop-ivcanon -ftree-loop-linear -ftree-loop-optimize @gol
-ftree-parallelize-loops=@var{n} -ftree-pre -ftree-pta -ftree-reassoc @gol
-ftree-sink -ftree-sra -ftree-switch-conversion -ftree-tail-merge @gol
-ftree-ter -ftree-vect-loop-version -ftree-vectorize -ftree-vrp @gol
-funit-at-a-time -funroll-all-loops -funroll-loops @gol
-funsafe-loop-optimizations -funsafe-math-optimizations -funswitch-loops @gol
-fvariable-expansion-in-unroller -fvect-cost-model -fvpt -fweb @gol
-fwhole-program -fwpa -fuse-linker-plugin @gol
--param @var{name}=@var{value}
-O  -O0  -O1  -O2  -O3  -Os -Ofast}

@item Preprocessor Options
@xref{Preprocessor Options,,Options Controlling the Preprocessor}.
@gccoptlist{-A@var{question}=@var{answer} @gol
-A-@var{question}@r{[}=@var{answer}@r{]} @gol
-C  -dD  -dI  -dM  -dN @gol
-D@var{macro}@r{[}=@var{defn}@r{]}  -E  -H @gol
-idirafter @var{dir} @gol
-include @var{file}  -imacros @var{file} @gol
-iprefix @var{file}  -iwithprefix @var{dir} @gol
-iwithprefixbefore @var{dir}  -isystem @var{dir} @gol
-imultilib @var{dir} -isysroot @var{dir} @gol
-M  -MM  -MF  -MG  -MP  -MQ  -MT  -nostdinc  @gol
-P  -fdebug-cpp -ftrack-macro-expansion -fworking-directory @gol
-remap -trigraphs  -undef  -U@var{macro}  @gol
-Wp,@var{option} -Xpreprocessor @var{option}}

@item Assembler Option
@xref{Assembler Options,,Passing Options to the Assembler}.
@gccoptlist{-Wa,@var{option}  -Xassembler @var{option}}

@item Linker Options
@xref{Link Options,,Options for Linking}.
@gccoptlist{@var{object-file-name}  -l@var{library} @gol
-nostartfiles  -nodefaultlibs  -nostdlib -pie -rdynamic @gol
-s  -static  -static-libgcc  -static-libstdc++ -shared  @gol
-shared-libgcc  -symbolic @gol
-T @var{script}  -Wl,@var{option}  -Xlinker @var{option} @gol
-u @var{symbol}}

@item Directory Options
@xref{Directory Options,,Options for Directory Search}.
@gccoptlist{-B@var{prefix} -I@var{dir} -iplugindir=@var{dir} @gol
-iquote@var{dir} -L@var{dir} -specs=@var{file} -I- @gol
--sysroot=@var{dir}}

@item Machine Dependent Options
@xref{Submodel Options,,Hardware Models and Configurations}.
@c This list is ordered alphanumerically by subsection name.
@c Try and put the significant identifier (CPU or system) first,
@c so users have a clue at guessing where the ones they want will be.

@emph{Adapteva Epiphany Options}
@gccoptlist{-mhalf-reg-file -mprefer-short-insn-regs @gol
-mbranch-cost=@var{num} -mcmove -mnops=@var{num} -msoft-cmpsf @gol
-msplit-lohi -mpost-inc -mpost-modify -mstack-offset=@var{num} @gol
-mround-nearest -mlong-calls -mshort-calls -msmall16 @gol
-mfp-mode=@var{mode} -mvect-double -max-vect-align=@var{num} @gol
-msplit-vecmove-early -m1reg-@var{reg}}

@emph{ARM Options}
@gccoptlist{-mapcs-frame  -mno-apcs-frame @gol
-mabi=@var{name} @gol
-mapcs-stack-check  -mno-apcs-stack-check @gol
-mapcs-float  -mno-apcs-float @gol
-mapcs-reentrant  -mno-apcs-reentrant @gol
-msched-prolog  -mno-sched-prolog @gol
-mlittle-endian  -mbig-endian  -mwords-little-endian @gol
-mfloat-abi=@var{name}  -mfpe @gol
-mfp16-format=@var{name}
-mthumb-interwork  -mno-thumb-interwork @gol
-mcpu=@var{name}  -march=@var{name}  -mfpu=@var{name}  @gol
-mstructure-size-boundary=@var{n} @gol
-mabort-on-noreturn @gol
-mlong-calls  -mno-long-calls @gol
-msingle-pic-base  -mno-single-pic-base @gol
-mpic-register=@var{reg} @gol
-mnop-fun-dllimport @gol
-mcirrus-fix-invalid-insns -mno-cirrus-fix-invalid-insns @gol
-mpoke-function-name @gol
-mthumb  -marm @gol
-mtpcs-frame  -mtpcs-leaf-frame @gol
-mcaller-super-interworking  -mcallee-super-interworking @gol
-mtp=@var{name} -mtls-dialect=@var{dialect} @gol
-mword-relocations @gol
-mfix-cortex-m3-ldrd}

@emph{AVR Options}
@gccoptlist{-mmcu=@var{mcu}  -mno-interrupts @gol
-mcall-prologues  -mtiny-stack  -mint8  -mstrict-X}

@emph{Blackfin Options}
@gccoptlist{-mcpu=@var{cpu}@r{[}-@var{sirevision}@r{]} @gol
-msim -momit-leaf-frame-pointer  -mno-omit-leaf-frame-pointer @gol
-mspecld-anomaly  -mno-specld-anomaly  -mcsync-anomaly  -mno-csync-anomaly @gol
-mlow-64k -mno-low64k  -mstack-check-l1  -mid-shared-library @gol
-mno-id-shared-library  -mshared-library-id=@var{n} @gol
-mleaf-id-shared-library  -mno-leaf-id-shared-library @gol
-msep-data  -mno-sep-data  -mlong-calls  -mno-long-calls @gol
-mfast-fp -minline-plt -mmulticore  -mcorea  -mcoreb  -msdram @gol
-micplb}

@emph{C6X Options}
@gccoptlist{-mbig-endian  -mlittle-endian -march=@var{cpu} @gol
-msim -msdata=@var{sdata-type}}

@emph{CRIS Options}
@gccoptlist{-mcpu=@var{cpu}  -march=@var{cpu}  -mtune=@var{cpu} @gol
-mmax-stack-frame=@var{n}  -melinux-stacksize=@var{n} @gol
-metrax4  -metrax100  -mpdebug  -mcc-init  -mno-side-effects @gol
-mstack-align  -mdata-align  -mconst-align @gol
-m32-bit  -m16-bit  -m8-bit  -mno-prologue-epilogue  -mno-gotplt @gol
-melf  -maout  -melinux  -mlinux  -sim  -sim2 @gol
-mmul-bug-workaround  -mno-mul-bug-workaround}

@emph{Darwin Options}
@gccoptlist{-all_load  -allowable_client  -arch  -arch_errors_fatal @gol
-arch_only  -bind_at_load  -bundle  -bundle_loader @gol
-client_name  -compatibility_version  -current_version @gol
-dead_strip @gol
-dependency-file  -dylib_file  -dylinker_install_name @gol
-dynamic  -dynamiclib  -exported_symbols_list @gol
-filelist  -flat_namespace  -force_cpusubtype_ALL @gol
-force_flat_namespace  -headerpad_max_install_names @gol
-iframework @gol
-image_base  -init  -install_name  -keep_private_externs @gol
-multi_module  -multiply_defined  -multiply_defined_unused @gol
-noall_load   -no_dead_strip_inits_and_terms @gol
-nofixprebinding -nomultidefs  -noprebind  -noseglinkedit @gol
-pagezero_size  -prebind  -prebind_all_twolevel_modules @gol
-private_bundle  -read_only_relocs  -sectalign @gol
-sectobjectsymbols  -whyload  -seg1addr @gol
-sectcreate  -sectobjectsymbols  -sectorder @gol
-segaddr -segs_read_only_addr -segs_read_write_addr @gol
-seg_addr_table  -seg_addr_table_filename  -seglinkedit @gol
-segprot  -segs_read_only_addr  -segs_read_write_addr @gol
-single_module  -static  -sub_library  -sub_umbrella @gol
-twolevel_namespace  -umbrella  -undefined @gol
-unexported_symbols_list  -weak_reference_mismatches @gol
-whatsloaded -F -gused -gfull -mmacosx-version-min=@var{version} @gol
-mkernel -mone-byte-bool}

@emph{DEC Alpha Options}
@gccoptlist{-mno-fp-regs  -msoft-float  -malpha-as  -mgas @gol
-mieee  -mieee-with-inexact  -mieee-conformant @gol
-mfp-trap-mode=@var{mode}  -mfp-rounding-mode=@var{mode} @gol
-mtrap-precision=@var{mode}  -mbuild-constants @gol
-mcpu=@var{cpu-type}  -mtune=@var{cpu-type} @gol
-mbwx  -mmax  -mfix  -mcix @gol
-mfloat-vax  -mfloat-ieee @gol
-mexplicit-relocs  -msmall-data  -mlarge-data @gol
-msmall-text  -mlarge-text @gol
-mmemory-latency=@var{time}}

@emph{DEC Alpha/VMS Options}
@gccoptlist{-mvms-return-codes -mdebug-main=@var{prefix} -mmalloc64}

@emph{FR30 Options}
@gccoptlist{-msmall-model -mno-lsim}

@emph{FRV Options}
@gccoptlist{-mgpr-32  -mgpr-64  -mfpr-32  -mfpr-64 @gol
-mhard-float  -msoft-float @gol
-malloc-cc  -mfixed-cc  -mdword  -mno-dword @gol
-mdouble  -mno-double @gol
-mmedia  -mno-media  -mmuladd  -mno-muladd @gol
-mfdpic  -minline-plt -mgprel-ro  -multilib-library-pic @gol
-mlinked-fp  -mlong-calls  -malign-labels @gol
-mlibrary-pic  -macc-4  -macc-8 @gol
-mpack  -mno-pack  -mno-eflags  -mcond-move  -mno-cond-move @gol
-moptimize-membar -mno-optimize-membar @gol
-mscc  -mno-scc  -mcond-exec  -mno-cond-exec @gol
-mvliw-branch  -mno-vliw-branch @gol
-mmulti-cond-exec  -mno-multi-cond-exec  -mnested-cond-exec @gol
-mno-nested-cond-exec  -mtomcat-stats @gol
-mTLS -mtls @gol
-mcpu=@var{cpu}}

@emph{GNU/Linux Options}
@gccoptlist{-mglibc -muclibc -mbionic -mandroid @gol
-tno-android-cc -tno-android-ld}

@emph{H8/300 Options}
@gccoptlist{-mrelax  -mh  -ms  -mn  -mint32  -malign-300}

@emph{HPPA Options}
@gccoptlist{-march=@var{architecture-type} @gol
-mbig-switch  -mdisable-fpregs  -mdisable-indexing @gol
-mfast-indirect-calls  -mgas  -mgnu-ld   -mhp-ld @gol
-mfixed-range=@var{register-range} @gol
-mjump-in-delay -mlinker-opt -mlong-calls @gol
-mlong-load-store  -mno-big-switch  -mno-disable-fpregs @gol
-mno-disable-indexing  -mno-fast-indirect-calls  -mno-gas @gol
-mno-jump-in-delay  -mno-long-load-store @gol
-mno-portable-runtime  -mno-soft-float @gol
-mno-space-regs  -msoft-float  -mpa-risc-1-0 @gol
-mpa-risc-1-1  -mpa-risc-2-0  -mportable-runtime @gol
-mschedule=@var{cpu-type}  -mspace-regs  -msio  -mwsio @gol
-munix=@var{unix-std}  -nolibdld  -static  -threads}

@emph{i386 and x86-64 Options}
@gccoptlist{-mtune=@var{cpu-type}  -march=@var{cpu-type} @gol
-mfpmath=@var{unit} @gol
-masm=@var{dialect}  -mno-fancy-math-387 @gol
-mno-fp-ret-in-387  -msoft-float @gol
-mno-wide-multiply  -mrtd  -malign-double @gol
-mpreferred-stack-boundary=@var{num} @gol
-mincoming-stack-boundary=@var{num} @gol
-mcld -mcx16 -msahf -mmovbe -mcrc32 @gol
-mrecip -mrecip=@var{opt} @gol
-mvzeroupper @gol
-mmmx  -msse  -msse2 -msse3 -mssse3 -msse4.1 -msse4.2 -msse4 -mavx @gol
-mavx2 -maes -mpclmul -mfsgsbase -mrdrnd -mf16c -mfma @gol
-msse4a -m3dnow -mpopcnt -mabm -mbmi -mtbm -mfma4 -mxop -mlzcnt @gol
-mbmi2 -mlwp -mthreads  -mno-align-stringops  -minline-all-stringops @gol
-minline-stringops-dynamically -mstringop-strategy=@var{alg} @gol
-mpush-args  -maccumulate-outgoing-args  -m128bit-long-double @gol
-m96bit-long-double  -mregparm=@var{num}  -msseregparm @gol
-mveclibabi=@var{type} -mvect8-ret-in-mem @gol
-mpc32 -mpc64 -mpc80 -mstackrealign @gol
-momit-leaf-frame-pointer  -mno-red-zone -mno-tls-direct-seg-refs @gol
-mcmodel=@var{code-model} -mabi=@var{name} @gol
-m32 -m64 -mx32 -mlarge-data-threshold=@var{num} @gol
-msse2avx -mfentry -m8bit-idiv @gol
-mavx256-split-unaligned-load -mavx256-split-unaligned-store}

@emph{i386 and x86-64 Windows Options}
@gccoptlist{-mconsole -mcygwin -mno-cygwin -mdll @gol
-mnop-fun-dllimport -mthread @gol
-municode -mwin32 -mwindows -fno-set-stack-executable}

@emph{IA-64 Options}
@gccoptlist{-mbig-endian  -mlittle-endian  -mgnu-as  -mgnu-ld  -mno-pic @gol
-mvolatile-asm-stop  -mregister-names  -msdata -mno-sdata @gol
-mconstant-gp  -mauto-pic  -mfused-madd @gol
-minline-float-divide-min-latency @gol
-minline-float-divide-max-throughput @gol
-mno-inline-float-divide @gol
-minline-int-divide-min-latency @gol
-minline-int-divide-max-throughput  @gol
-mno-inline-int-divide @gol
-minline-sqrt-min-latency -minline-sqrt-max-throughput @gol
-mno-inline-sqrt @gol
-mdwarf2-asm -mearly-stop-bits @gol
-mfixed-range=@var{register-range} -mtls-size=@var{tls-size} @gol
-mtune=@var{cpu-type} -milp32 -mlp64 @gol
-msched-br-data-spec -msched-ar-data-spec -msched-control-spec @gol
-msched-br-in-data-spec -msched-ar-in-data-spec -msched-in-control-spec @gol
-msched-spec-ldc -msched-spec-control-ldc @gol
-msched-prefer-non-data-spec-insns -msched-prefer-non-control-spec-insns @gol
-msched-stop-bits-after-every-cycle -msched-count-spec-in-critical-path @gol
-msel-sched-dont-check-control-spec -msched-fp-mem-deps-zero-cost @gol
-msched-max-memory-insns-hard-limit -msched-max-memory-insns=@var{max-insns}}

@emph{IA-64/VMS Options}
@gccoptlist{-mvms-return-codes -mdebug-main=@var{prefix} -mmalloc64}

@emph{LM32 Options}
@gccoptlist{-mbarrel-shift-enabled -mdivide-enabled -mmultiply-enabled @gol
-msign-extend-enabled -muser-enabled}

@emph{M32R/D Options}
@gccoptlist{-m32r2 -m32rx -m32r @gol
-mdebug @gol
-malign-loops -mno-align-loops @gol
-missue-rate=@var{number} @gol
-mbranch-cost=@var{number} @gol
-mmodel=@var{code-size-model-type} @gol
-msdata=@var{sdata-type} @gol
-mno-flush-func -mflush-func=@var{name} @gol
-mno-flush-trap -mflush-trap=@var{number} @gol
-G @var{num}}

@emph{M32C Options}
@gccoptlist{-mcpu=@var{cpu} -msim -memregs=@var{number}}

@emph{M680x0 Options}
@gccoptlist{-march=@var{arch}  -mcpu=@var{cpu}  -mtune=@var{tune}
-m68000  -m68020  -m68020-40  -m68020-60  -m68030  -m68040 @gol
-m68060  -mcpu32  -m5200  -m5206e  -m528x  -m5307  -m5407 @gol
-mcfv4e  -mbitfield  -mno-bitfield  -mc68000  -mc68020 @gol
-mnobitfield  -mrtd  -mno-rtd  -mdiv  -mno-div  -mshort @gol
-mno-short  -mhard-float  -m68881  -msoft-float  -mpcrel @gol
-malign-int  -mstrict-align  -msep-data  -mno-sep-data @gol
-mshared-library-id=n  -mid-shared-library  -mno-id-shared-library @gol
-mxgot -mno-xgot}

@emph{MCore Options}
@gccoptlist{-mhardlit  -mno-hardlit  -mdiv  -mno-div  -mrelax-immediates @gol
-mno-relax-immediates  -mwide-bitfields  -mno-wide-bitfields @gol
-m4byte-functions  -mno-4byte-functions  -mcallgraph-data @gol
-mno-callgraph-data  -mslow-bytes  -mno-slow-bytes  -mno-lsim @gol
-mlittle-endian  -mbig-endian  -m210  -m340  -mstack-increment}

@emph{MeP Options}
@gccoptlist{-mabsdiff -mall-opts -maverage -mbased=@var{n} -mbitops @gol
-mc=@var{n} -mclip -mconfig=@var{name} -mcop -mcop32 -mcop64 -mivc2 @gol
-mdc -mdiv -meb -mel -mio-volatile -ml -mleadz -mm -mminmax @gol
-mmult -mno-opts -mrepeat -ms -msatur -msdram -msim -msimnovec -mtf @gol
-mtiny=@var{n}}

@emph{MicroBlaze Options}
@gccoptlist{-msoft-float -mhard-float -msmall-divides -mcpu=@var{cpu} @gol
-mmemcpy -mxl-soft-mul -mxl-soft-div -mxl-barrel-shift @gol
-mxl-pattern-compare -mxl-stack-check -mxl-gp-opt -mno-clearbss @gol
-mxl-multiply-high -mxl-float-convert -mxl-float-sqrt @gol
-mxl-mode-@var{app-model}}

@emph{MIPS Options}
@gccoptlist{-EL  -EB  -march=@var{arch}  -mtune=@var{arch} @gol
-mips1  -mips2  -mips3  -mips4  -mips32  -mips32r2 @gol
-mips64  -mips64r2 @gol
-mips16  -mno-mips16  -mflip-mips16 @gol
-minterlink-mips16  -mno-interlink-mips16 @gol
-mabi=@var{abi}  -mabicalls  -mno-abicalls @gol
-mshared  -mno-shared  -mplt  -mno-plt  -mxgot  -mno-xgot @gol
-mgp32  -mgp64  -mfp32  -mfp64  -mhard-float  -msoft-float @gol
-msingle-float  -mdouble-float  -mdsp  -mno-dsp  -mdspr2  -mno-dspr2 @gol
-mfpu=@var{fpu-type} @gol
-msmartmips  -mno-smartmips @gol
-mpaired-single  -mno-paired-single  -mdmx  -mno-mdmx @gol
-mips3d  -mno-mips3d  -mmt  -mno-mt  -mllsc  -mno-llsc @gol
-mlong64  -mlong32  -msym32  -mno-sym32 @gol
-G@var{num}  -mlocal-sdata  -mno-local-sdata @gol
-mextern-sdata  -mno-extern-sdata  -mgpopt  -mno-gopt @gol
-membedded-data  -mno-embedded-data @gol
-muninit-const-in-rodata  -mno-uninit-const-in-rodata @gol
-mcode-readable=@var{setting} @gol
-msplit-addresses  -mno-split-addresses @gol
-mexplicit-relocs  -mno-explicit-relocs @gol
-mcheck-zero-division  -mno-check-zero-division @gol
-mdivide-traps  -mdivide-breaks @gol
-mmemcpy  -mno-memcpy  -mlong-calls  -mno-long-calls @gol
-mmad  -mno-mad  -mfused-madd  -mno-fused-madd  -nocpp @gol
-mfix-24k -mno-fix-24k @gol
-mfix-r4000  -mno-fix-r4000  -mfix-r4400  -mno-fix-r4400 @gol
-mfix-r10000 -mno-fix-r10000  -mfix-vr4120  -mno-fix-vr4120 @gol
-mfix-vr4130  -mno-fix-vr4130  -mfix-sb1  -mno-fix-sb1 @gol
-mflush-func=@var{func}  -mno-flush-func @gol
-mbranch-cost=@var{num}  -mbranch-likely  -mno-branch-likely @gol
-mfp-exceptions -mno-fp-exceptions @gol
-mvr4130-align -mno-vr4130-align -msynci -mno-synci @gol
-mrelax-pic-calls -mno-relax-pic-calls -mmcount-ra-address}

@emph{MMIX Options}
@gccoptlist{-mlibfuncs  -mno-libfuncs  -mepsilon  -mno-epsilon  -mabi=gnu @gol
-mabi=mmixware  -mzero-extend  -mknuthdiv  -mtoplevel-symbols @gol
-melf  -mbranch-predict  -mno-branch-predict  -mbase-addresses @gol
-mno-base-addresses  -msingle-exit  -mno-single-exit}

@emph{MN10300 Options}
@gccoptlist{-mmult-bug  -mno-mult-bug @gol
-mno-am33 -mam33 -mam33-2 -mam34 @gol
-mtune=@var{cpu-type} @gol
-mreturn-pointer-on-d0 @gol
-mno-crt0  -mrelax -mliw -msetlb}

@emph{PDP-11 Options}
@gccoptlist{-mfpu  -msoft-float  -mac0  -mno-ac0  -m40  -m45  -m10 @gol
-mbcopy  -mbcopy-builtin  -mint32  -mno-int16 @gol
-mint16  -mno-int32  -mfloat32  -mno-float64 @gol
-mfloat64  -mno-float32  -mabshi  -mno-abshi @gol
-mbranch-expensive  -mbranch-cheap @gol
-munix-asm  -mdec-asm}

@emph{picoChip Options}
@gccoptlist{-mae=@var{ae_type} -mvliw-lookahead=@var{N} @gol
-msymbol-as-address -mno-inefficient-warnings}

@emph{PowerPC Options}
See RS/6000 and PowerPC Options.

@emph{RL78 Options}
@gccoptlist{-msim -mmul=none -mmul=g13 -mmul=rl78}

@emph{RS/6000 and PowerPC Options}
@gccoptlist{-mcpu=@var{cpu-type} @gol
-mtune=@var{cpu-type} @gol
-mcmodel=@var{code-model} @gol
-mpower  -mno-power  -mpower2  -mno-power2 @gol
-mpowerpc  -mpowerpc64  -mno-powerpc @gol
-maltivec  -mno-altivec @gol
-mpowerpc-gpopt  -mno-powerpc-gpopt @gol
-mpowerpc-gfxopt  -mno-powerpc-gfxopt @gol
-mmfcrf  -mno-mfcrf  -mpopcntb  -mno-popcntb -mpopcntd -mno-popcntd @gol
-mfprnd  -mno-fprnd @gol
-mcmpb -mno-cmpb -mmfpgpr -mno-mfpgpr -mhard-dfp -mno-hard-dfp @gol
-mnew-mnemonics  -mold-mnemonics @gol
-mfull-toc   -mminimal-toc  -mno-fp-in-toc  -mno-sum-in-toc @gol
-m64  -m32  -mxl-compat  -mno-xl-compat  -mpe @gol
-malign-power  -malign-natural @gol
-msoft-float  -mhard-float  -mmultiple  -mno-multiple @gol
-msingle-float -mdouble-float -msimple-fpu @gol
-mstring  -mno-string  -mupdate  -mno-update @gol
-mavoid-indexed-addresses  -mno-avoid-indexed-addresses @gol
-mfused-madd  -mno-fused-madd  -mbit-align  -mno-bit-align @gol
-mstrict-align  -mno-strict-align  -mrelocatable @gol
-mno-relocatable  -mrelocatable-lib  -mno-relocatable-lib @gol
-mtoc  -mno-toc  -mlittle  -mlittle-endian  -mbig  -mbig-endian @gol
-mdynamic-no-pic  -maltivec -mswdiv  -msingle-pic-base @gol
-mprioritize-restricted-insns=@var{priority} @gol
-msched-costly-dep=@var{dependence_type} @gol
-minsert-sched-nops=@var{scheme} @gol
-mcall-sysv  -mcall-netbsd @gol
-maix-struct-return  -msvr4-struct-return @gol
-mabi=@var{abi-type} -msecure-plt -mbss-plt @gol
-mblock-move-inline-limit=@var{num} @gol
-misel -mno-isel @gol
-misel=yes  -misel=no @gol
-mspe -mno-spe @gol
-mspe=yes  -mspe=no @gol
-mpaired @gol
-mgen-cell-microcode -mwarn-cell-microcode @gol
-mvrsave -mno-vrsave @gol
-mmulhw -mno-mulhw @gol
-mdlmzb -mno-dlmzb @gol
-mfloat-gprs=yes  -mfloat-gprs=no -mfloat-gprs=single -mfloat-gprs=double @gol
-mprototype  -mno-prototype @gol
-msim  -mmvme  -mads  -myellowknife  -memb  -msdata @gol
-msdata=@var{opt}  -mvxworks  -G @var{num}  -pthread @gol
-mrecip -mrecip=@var{opt} -mno-recip -mrecip-precision @gol
-mno-recip-precision @gol
-mveclibabi=@var{type} -mfriz -mno-friz @gol
-mpointers-to-nested-functions -mno-pointers-to-nested-functions @gol
-msave-toc-indirect -mno-save-toc-indirect}

@emph{RX Options}
@gccoptlist{-m64bit-doubles  -m32bit-doubles  -fpu  -nofpu@gol
-mcpu=@gol
-mbig-endian-data -mlittle-endian-data @gol
-msmall-data @gol
-msim  -mno-sim@gol
-mas100-syntax -mno-as100-syntax@gol
-mrelax@gol
-mmax-constant-size=@gol
-mint-register=@gol
-mpid@gol
-msave-acc-in-interrupts}

@emph{S/390 and zSeries Options}
@gccoptlist{-mtune=@var{cpu-type}  -march=@var{cpu-type} @gol
-mhard-float  -msoft-float  -mhard-dfp -mno-hard-dfp @gol
-mlong-double-64 -mlong-double-128 @gol
-mbackchain  -mno-backchain -mpacked-stack  -mno-packed-stack @gol
-msmall-exec  -mno-small-exec  -mmvcle -mno-mvcle @gol
-m64  -m31  -mdebug  -mno-debug  -mesa  -mzarch @gol
-mtpf-trace -mno-tpf-trace  -mfused-madd  -mno-fused-madd @gol
-mwarn-framesize  -mwarn-dynamicstack  -mstack-size -mstack-guard}

@emph{Score Options}
@gccoptlist{-meb -mel @gol
-mnhwloop @gol
-muls @gol
-mmac @gol
-mscore5 -mscore5u -mscore7 -mscore7d}

@emph{SH Options}
@gccoptlist{-m1  -m2  -m2e @gol
-m2a-nofpu -m2a-single-only -m2a-single -m2a @gol
-m3  -m3e @gol
-m4-nofpu  -m4-single-only  -m4-single  -m4 @gol
-m4a-nofpu -m4a-single-only -m4a-single -m4a -m4al @gol
-m5-64media  -m5-64media-nofpu @gol
-m5-32media  -m5-32media-nofpu @gol
-m5-compact  -m5-compact-nofpu @gol
-mb  -ml  -mdalign  -mrelax @gol
-mbigtable -mfmovd -mhitachi -mrenesas -mno-renesas -mnomacsave @gol
-mieee  -mbitops  -misize  -minline-ic_invalidate -mpadstruct  -mspace @gol
-mprefergot  -musermode -multcost=@var{number} -mdiv=@var{strategy} @gol
-mdivsi3_libfunc=@var{name} -mfixed-range=@var{register-range} @gol
-madjust-unroll -mindexed-addressing -mgettrcost=@var{number} -mpt-fixed @gol
-maccumulate-outgoing-args -minvalid-symbols -msoft-atomic}

@emph{Solaris 2 Options}
@gccoptlist{-mimpure-text  -mno-impure-text @gol
-pthreads -pthread}

@emph{SPARC Options}
@gccoptlist{-mcpu=@var{cpu-type} @gol
-mtune=@var{cpu-type} @gol
-mcmodel=@var{code-model} @gol
-mmemory-model=@var{mem-model} @gol
-m32  -m64  -mapp-regs  -mno-app-regs @gol
-mfaster-structs  -mno-faster-structs  -mflat  -mno-flat @gol
-mfpu  -mno-fpu  -mhard-float  -msoft-float @gol
-mhard-quad-float  -msoft-quad-float @gol
-mlittle-endian @gol
-mstack-bias  -mno-stack-bias @gol
-munaligned-doubles  -mno-unaligned-doubles @gol
-mv8plus  -mno-v8plus  -mvis  -mno-vis @gol
-mvis2  -mno-vis2  -mvis3  -mno-vis3 @gol
-mfmaf  -mno-fmaf  -mpopc  -mno-popc @gol
-mfix-at697f}

@emph{SPU Options}
@gccoptlist{-mwarn-reloc -merror-reloc @gol
-msafe-dma -munsafe-dma @gol
-mbranch-hints @gol
-msmall-mem -mlarge-mem -mstdmain @gol
-mfixed-range=@var{register-range} @gol
-mea32 -mea64 @gol
-maddress-space-conversion -mno-address-space-conversion @gol
-mcache-size=@var{cache-size} @gol
-matomic-updates -mno-atomic-updates}

@emph{System V Options}
@gccoptlist{-Qy  -Qn  -YP,@var{paths}  -Ym,@var{dir}}

@emph{V850 Options}
@gccoptlist{-mlong-calls  -mno-long-calls  -mep  -mno-ep @gol
-mprolog-function  -mno-prolog-function  -mspace @gol
-mtda=@var{n}  -msda=@var{n}  -mzda=@var{n} @gol
-mapp-regs  -mno-app-regs @gol
-mdisable-callt  -mno-disable-callt @gol
-mv850e2v3 @gol
-mv850e2 @gol
-mv850e1 -mv850es @gol
-mv850e @gol
-mv850  -mbig-switch}

@emph{VAX Options}
@gccoptlist{-mg  -mgnu  -munix}

@emph{VxWorks Options}
@gccoptlist{-mrtp  -non-static  -Bstatic  -Bdynamic @gol
-Xbind-lazy  -Xbind-now}

@emph{x86-64 Options}
See i386 and x86-64 Options.

@emph{Xstormy16 Options}
@gccoptlist{-msim}

@emph{Xtensa Options}
@gccoptlist{-mconst16 -mno-const16 @gol
-mfused-madd  -mno-fused-madd @gol
-mforce-no-pic @gol
-mserialize-volatile  -mno-serialize-volatile @gol
-mtext-section-literals  -mno-text-section-literals @gol
-mtarget-align  -mno-target-align @gol
-mlongcalls  -mno-longcalls}

@emph{zSeries Options}
See S/390 and zSeries Options.

@item Code Generation Options
@xref{Code Gen Options,,Options for Code Generation Conventions}.
@gccoptlist{-fcall-saved-@var{reg}  -fcall-used-@var{reg} @gol
-ffixed-@var{reg}  -fexceptions @gol
-fnon-call-exceptions  -funwind-tables @gol
-fasynchronous-unwind-tables @gol
-finhibit-size-directive  -finstrument-functions @gol
-finstrument-functions-exclude-function-list=@var{sym},@var{sym},@dots{} @gol
-finstrument-functions-exclude-file-list=@var{file},@var{file},@dots{} @gol
-fno-common  -fno-ident @gol
-fpcc-struct-return  -fpic  -fPIC -fpie -fPIE @gol
-fno-jump-tables @gol
-frecord-gcc-switches @gol
-freg-struct-return  -fshort-enums @gol
-fshort-double  -fshort-wchar @gol
-fverbose-asm  -fpack-struct[=@var{n}]  -fstack-check @gol
-fstack-limit-register=@var{reg}  -fstack-limit-symbol=@var{sym} @gol
-fno-stack-limit -fsplit-stack @gol
-fleading-underscore  -ftls-model=@var{model} @gol
-ftrapv  -fwrapv  -fbounds-check @gol
-fvisibility -fstrict-volatile-bitfields}
@end table

@menu
* Overall Options::     Controlling the kind of output:
                        an executable, object files, assembler files,
                        or preprocessed source.
* C Dialect Options::   Controlling the variant of C language compiled.
* C++ Dialect Options:: Variations on C++.
* Objective-C and Objective-C++ Dialect Options:: Variations on Objective-C
                        and Objective-C++.
* Language Independent Options:: Controlling how diagnostics should be
                        formatted.
* Warning Options::     How picky should the compiler be?
* Debugging Options::   Symbol tables, measurements, and debugging dumps.
* Optimize Options::    How much optimization?
* Preprocessor Options:: Controlling header files and macro definitions.
                         Also, getting dependency information for Make.
* Assembler Options::   Passing options to the assembler.
* Link Options::        Specifying libraries and so on.
* Directory Options::   Where to find header files and libraries.
                        Where to find the compiler executable files.
* Spec Files::          How to pass switches to sub-processes.
* Target Options::      Running a cross-compiler, or an old version of GCC.
@end menu

@node Overall Options
@section Options Controlling the Kind of Output

Compilation can involve up to four stages: preprocessing, compilation
proper, assembly and linking, always in that order.  GCC is capable of
preprocessing and compiling several files either into several
assembler input files, or into one assembler input file; then each
assembler input file produces an object file, and linking combines all
the object files (those newly compiled, and those specified as input)
into an executable file.

@cindex file name suffix
For any given input file, the file name suffix determines what kind of
compilation is done:

@table @gcctabopt
@item @var{file}.c
C source code which must be preprocessed.

@item @var{file}.i
C source code which should not be preprocessed.

@item @var{file}.ii
C++ source code which should not be preprocessed.

@item @var{file}.m
Objective-C source code.  Note that you must link with the @file{libobjc}
library to make an Objective-C program work.

@item @var{file}.mi
Objective-C source code which should not be preprocessed.

@item @var{file}.mm
@itemx @var{file}.M
Objective-C++ source code.  Note that you must link with the @file{libobjc}
library to make an Objective-C++ program work.  Note that @samp{.M} refers
to a literal capital M@.

@item @var{file}.mii
Objective-C++ source code which should not be preprocessed.

@item @var{file}.h
C, C++, Objective-C or Objective-C++ header file to be turned into a
precompiled header (default), or C, C++ header file to be turned into an
Ada spec (via the @option{-fdump-ada-spec} switch).

@item @var{file}.cc
@itemx @var{file}.cp
@itemx @var{file}.cxx
@itemx @var{file}.cpp
@itemx @var{file}.CPP
@itemx @var{file}.c++
@itemx @var{file}.C
C++ source code which must be preprocessed.  Note that in @samp{.cxx},
the last two letters must both be literally @samp{x}.  Likewise,
@samp{.C} refers to a literal capital C@.

@item @var{file}.mm
@itemx @var{file}.M
Objective-C++ source code which must be preprocessed.

@item @var{file}.mii
Objective-C++ source code which should not be preprocessed.

@item @var{file}.hh
@itemx @var{file}.H
@itemx @var{file}.hp
@itemx @var{file}.hxx
@itemx @var{file}.hpp
@itemx @var{file}.HPP
@itemx @var{file}.h++
@itemx @var{file}.tcc
C++ header file to be turned into a precompiled header or Ada spec.

@item @var{file}.f
@itemx @var{file}.for
@itemx @var{file}.ftn
Fixed form Fortran source code which should not be preprocessed.

@item @var{file}.F
@itemx @var{file}.FOR
@itemx @var{file}.fpp
@itemx @var{file}.FPP
@itemx @var{file}.FTN
Fixed form Fortran source code which must be preprocessed (with the traditional
preprocessor).

@item @var{file}.f90
@itemx @var{file}.f95
@itemx @var{file}.f03
@itemx @var{file}.f08
Free form Fortran source code which should not be preprocessed.

@item @var{file}.F90
@itemx @var{file}.F95
@itemx @var{file}.F03
@itemx @var{file}.F08
Free form Fortran source code which must be preprocessed (with the
traditional preprocessor).

@item @var{file}.go
Go source code.

@c FIXME: Descriptions of Java file types.
@c @var{file}.java
@c @var{file}.class
@c @var{file}.zip
@c @var{file}.jar

@item @var{file}.ads
Ada source code file which contains a library unit declaration (a
declaration of a package, subprogram, or generic, or a generic
instantiation), or a library unit renaming declaration (a package,
generic, or subprogram renaming declaration).  Such files are also
called @dfn{specs}.

@item @var{file}.adb
Ada source code file containing a library unit body (a subprogram or
package body).  Such files are also called @dfn{bodies}.

@c GCC also knows about some suffixes for languages not yet included:
@c Pascal:
@c @var{file}.p
@c @var{file}.pas
@c Ratfor:
@c @var{file}.r

@item @var{file}.s
Assembler code.

@item @var{file}.S
@itemx @var{file}.sx
Assembler code which must be preprocessed.

@item @var{other}
An object file to be fed straight into linking.
Any file name with no recognized suffix is treated this way.
@end table

@opindex x
You can specify the input language explicitly with the @option{-x} option:

@table @gcctabopt
@item -x @var{language}
Specify explicitly the @var{language} for the following input files
(rather than letting the compiler choose a default based on the file
name suffix).  This option applies to all following input files until
the next @option{-x} option.  Possible values for @var{language} are:
@smallexample
c  c-header  cpp-output
c++  c++-header  c++-cpp-output
objective-c  objective-c-header  objective-c-cpp-output
objective-c++ objective-c++-header objective-c++-cpp-output
assembler  assembler-with-cpp
ada
f77  f77-cpp-input f95  f95-cpp-input
go
java
@end smallexample

@item -x none
Turn off any specification of a language, so that subsequent files are
handled according to their file name suffixes (as they are if @option{-x}
has not been used at all).

@item -pass-exit-codes
@opindex pass-exit-codes
Normally the @command{gcc} program will exit with the code of 1 if any
phase of the compiler returns a non-success return code.  If you specify
@option{-pass-exit-codes}, the @command{gcc} program will instead return with
numerically highest error produced by any phase that returned an error
indication.  The C, C++, and Fortran frontends return 4, if an internal
compiler error is encountered.
@end table

If you only want some of the stages of compilation, you can use
@option{-x} (or filename suffixes) to tell @command{gcc} where to start, and
one of the options @option{-c}, @option{-S}, or @option{-E} to say where
@command{gcc} is to stop.  Note that some combinations (for example,
@samp{-x cpp-output -E}) instruct @command{gcc} to do nothing at all.

@table @gcctabopt
@item -c
@opindex c
Compile or assemble the source files, but do not link.  The linking
stage simply is not done.  The ultimate output is in the form of an
object file for each source file.

By default, the object file name for a source file is made by replacing
the suffix @samp{.c}, @samp{.i}, @samp{.s}, etc., with @samp{.o}.

Unrecognized input files, not requiring compilation or assembly, are
ignored.

@item -S
@opindex S
Stop after the stage of compilation proper; do not assemble.  The output
is in the form of an assembler code file for each non-assembler input
file specified.

By default, the assembler file name for a source file is made by
replacing the suffix @samp{.c}, @samp{.i}, etc., with @samp{.s}.

Input files that don't require compilation are ignored.

@item -E
@opindex E
Stop after the preprocessing stage; do not run the compiler proper.  The
output is in the form of preprocessed source code, which is sent to the
standard output.

Input files which don't require preprocessing are ignored.

@cindex output file option
@item -o @var{file}
@opindex o
Place output in file @var{file}.  This applies regardless to whatever
sort of output is being produced, whether it be an executable file,
an object file, an assembler file or preprocessed C code.

If @option{-o} is not specified, the default is to put an executable
file in @file{a.out}, the object file for
@file{@var{source}.@var{suffix}} in @file{@var{source}.o}, its
assembler file in @file{@var{source}.s}, a precompiled header file in
@file{@var{source}.@var{suffix}.gch}, and all preprocessed C source on
standard output.

@item -v
@opindex v
Print (on standard error output) the commands executed to run the stages
of compilation.  Also print the version number of the compiler driver
program and of the preprocessor and the compiler proper.

@item -###
@opindex ###
Like @option{-v} except the commands are not executed and arguments
are quoted unless they contain only alphanumeric characters or @code{./-_}.
This is useful for shell scripts to capture the driver-generated command lines.

@item -pipe
@opindex pipe
Use pipes rather than temporary files for communication between the
various stages of compilation.  This fails to work on some systems where
the assembler is unable to read from a pipe; but the GNU assembler has
no trouble.

@item --help
@opindex help
Print (on the standard output) a description of the command line options
understood by @command{gcc}.  If the @option{-v} option is also specified
then @option{--help} will also be passed on to the various processes
invoked by @command{gcc}, so that they can display the command line options
they accept.  If the @option{-Wextra} option has also been specified
(prior to the @option{--help} option), then command line options which
have no documentation associated with them will also be displayed.

@item --target-help
@opindex target-help
Print (on the standard output) a description of target-specific command
line options for each tool.  For some targets extra target-specific
information may also be printed.

@item --help=@{@var{class}@r{|[}^@r{]}@var{qualifier}@}@r{[},@dots{}@r{]}
Print (on the standard output) a description of the command line
options understood by the compiler that fit into all specified classes
and qualifiers.  These are the supported classes:

@table @asis
@item @samp{optimizers}
This will display all of the optimization options supported by the
compiler.

@item @samp{warnings}
This will display all of the options controlling warning messages
produced by the compiler.

@item @samp{target}
This will display target-specific options.  Unlike the
@option{--target-help} option however, target-specific options of the
linker and assembler will not be displayed.  This is because those
tools do not currently support the extended @option{--help=} syntax.

@item @samp{params}
This will display the values recognized by the @option{--param}
option.

@item @var{language}
This will display the options supported for @var{language}, where
@var{language} is the name of one of the languages supported in this
version of GCC.

@item @samp{common}
This will display the options that are common to all languages.
@end table

These are the supported qualifiers:

@table @asis
@item @samp{undocumented}
Display only those options which are undocumented.

@item @samp{joined}
Display options which take an argument that appears after an equal
sign in the same continuous piece of text, such as:
@samp{--help=target}.

@item @samp{separate}
Display options which take an argument that appears as a separate word
following the original option, such as: @samp{-o output-file}.
@end table

Thus for example to display all the undocumented target-specific
switches supported by the compiler the following can be used:

@smallexample
--help=target,undocumented
@end smallexample

The sense of a qualifier can be inverted by prefixing it with the
@samp{^} character, so for example to display all binary warning
options (i.e., ones that are either on or off and that do not take an
argument), which have a description the following can be used:

@smallexample
--help=warnings,^joined,^undocumented
@end smallexample

The argument to @option{--help=} should not consist solely of inverted
qualifiers.

Combining several classes is possible, although this usually
restricts the output by so much that there is nothing to display.  One
case where it does work however is when one of the classes is
@var{target}.  So for example to display all the target-specific
optimization options the following can be used:

@smallexample
--help=target,optimizers
@end smallexample

The @option{--help=} option can be repeated on the command line.  Each
successive use will display its requested class of options, skipping
those that have already been displayed.

If the @option{-Q} option appears on the command line before the
@option{--help=} option, then the descriptive text displayed by
@option{--help=} is changed.  Instead of describing the displayed
options, an indication is given as to whether the option is enabled,
disabled or set to a specific value (assuming that the compiler
knows this at the point where the @option{--help=} option is used).

Here is a truncated example from the ARM port of @command{gcc}:

@smallexample
  % gcc -Q -mabi=2 --help=target -c
  The following options are target specific:
  -mabi=                                2
  -mabort-on-noreturn                   [disabled]
  -mapcs                                [disabled]
@end smallexample

The output is sensitive to the effects of previous command line
options, so for example it is possible to find out which optimizations
are enabled at @option{-O2} by using:

@smallexample
-Q -O2 --help=optimizers
@end smallexample

Alternatively you can discover which binary optimizations are enabled
by @option{-O3} by using:

@smallexample
gcc -c -Q -O3 --help=optimizers > /tmp/O3-opts
gcc -c -Q -O2 --help=optimizers > /tmp/O2-opts
diff /tmp/O2-opts /tmp/O3-opts | grep enabled
@end smallexample

@item -no-canonical-prefixes
@opindex no-canonical-prefixes
Do not expand any symbolic links, resolve references to @samp{/../}
or @samp{/./}, or make the path absolute when generating a relative
prefix.

@item --version
@opindex version
Display the version number and copyrights of the invoked GCC@.

@item -wrapper
@opindex wrapper
Invoke all subcommands under a wrapper program.  The name of the
wrapper program and its parameters are passed as a comma separated
list.

@smallexample
gcc -c t.c -wrapper gdb,--args
@end smallexample

This will invoke all subprograms of @command{gcc} under
@samp{gdb --args}, thus the invocation of @command{cc1} will be
@samp{gdb --args cc1 @dots{}}.

@item -fplugin=@var{name}.so
Load the plugin code in file @var{name}.so, assumed to be a
shared object to be dlopen'd by the compiler.  The base name of
the shared object file is used to identify the plugin for the
purposes of argument parsing (See
@option{-fplugin-arg-@var{name}-@var{key}=@var{value}} below).
Each plugin should define the callback functions specified in the
Plugins API.

@item -fplugin-arg-@var{name}-@var{key}=@var{value}
Define an argument called @var{key} with a value of @var{value}
for the plugin called @var{name}.

@item -fdump-ada-spec@r{[}-slim@r{]}
For C and C++ source and include files, generate corresponding Ada
specs. @xref{Generating Ada Bindings for C and C++ headers,,, gnat_ugn,
GNAT User's Guide}, which provides detailed documentation on this feature.

@item -fdump-go-spec=@var{file}
For input files in any language, generate corresponding Go
declarations in @var{file}.  This generates Go @code{const},
@code{type}, @code{var}, and @code{func} declarations which may be a
useful way to start writing a Go interface to code written in some
other language.

@include @value{srcdir}/../libiberty/at-file.texi
@end table

@node Invoking G++
@section Compiling C++ Programs

@cindex suffixes for C++ source
@cindex C++ source file suffixes
C++ source files conventionally use one of the suffixes @samp{.C},
@samp{.cc}, @samp{.cpp}, @samp{.CPP}, @samp{.c++}, @samp{.cp}, or
@samp{.cxx}; C++ header files often use @samp{.hh}, @samp{.hpp},
@samp{.H}, or (for shared template code) @samp{.tcc}; and
preprocessed C++ files use the suffix @samp{.ii}.  GCC recognizes
files with these names and compiles them as C++ programs even if you
call the compiler the same way as for compiling C programs (usually
with the name @command{gcc}).

@findex g++
@findex c++
However, the use of @command{gcc} does not add the C++ library.
@command{g++} is a program that calls GCC and treats @samp{.c},
@samp{.h} and @samp{.i} files as C++ source files instead of C source
files unless @option{-x} is used, and automatically specifies linking
against the C++ library.  This program is also useful when
precompiling a C header file with a @samp{.h} extension for use in C++
compilations.  On many systems, @command{g++} is also installed with
the name @command{c++}.

@cindex invoking @command{g++}
When you compile C++ programs, you may specify many of the same
command-line options that you use for compiling programs in any
language; or command-line options meaningful for C and related
languages; or options that are meaningful only for C++ programs.
@xref{C Dialect Options,,Options Controlling C Dialect}, for
explanations of options for languages related to C@.
@xref{C++ Dialect Options,,Options Controlling C++ Dialect}, for
explanations of options that are meaningful only for C++ programs.

@node C Dialect Options
@section Options Controlling C Dialect
@cindex dialect options
@cindex language dialect options
@cindex options, dialect

The following options control the dialect of C (or languages derived
from C, such as C++, Objective-C and Objective-C++) that the compiler
accepts:

@table @gcctabopt
@cindex ANSI support
@cindex ISO support
@item -ansi
@opindex ansi
In C mode, this is equivalent to @samp{-std=c90}. In C++ mode, it is
equivalent to @samp{-std=c++98}.

This turns off certain features of GCC that are incompatible with ISO
C90 (when compiling C code), or of standard C++ (when compiling C++ code),
such as the @code{asm} and @code{typeof} keywords, and
predefined macros such as @code{unix} and @code{vax} that identify the
type of system you are using.  It also enables the undesirable and
rarely used ISO trigraph feature.  For the C compiler,
it disables recognition of C++ style @samp{//} comments as well as
the @code{inline} keyword.

The alternate keywords @code{__asm__}, @code{__extension__},
@code{__inline__} and @code{__typeof__} continue to work despite
@option{-ansi}.  You would not want to use them in an ISO C program, of
course, but it is useful to put them in header files that might be included
in compilations done with @option{-ansi}.  Alternate predefined macros
such as @code{__unix__} and @code{__vax__} are also available, with or
without @option{-ansi}.

The @option{-ansi} option does not cause non-ISO programs to be
rejected gratuitously.  For that, @option{-pedantic} is required in
addition to @option{-ansi}.  @xref{Warning Options}.

The macro @code{__STRICT_ANSI__} is predefined when the @option{-ansi}
option is used.  Some header files may notice this macro and refrain
from declaring certain functions or defining certain macros that the
ISO standard doesn't call for; this is to avoid interfering with any
programs that might use these names for other things.

Functions that would normally be built in but do not have semantics
defined by ISO C (such as @code{alloca} and @code{ffs}) are not built-in
functions when @option{-ansi} is used.  @xref{Other Builtins,,Other
built-in functions provided by GCC}, for details of the functions
affected.

@item -std=
@opindex std
Determine the language standard. @xref{Standards,,Language Standards
Supported by GCC}, for details of these standard versions.  This option
is currently only supported when compiling C or C++.

The compiler can accept several base standards, such as @samp{c90} or
@samp{c++98}, and GNU dialects of those standards, such as
@samp{gnu90} or @samp{gnu++98}.  By specifying a base standard, the
compiler will accept all programs following that standard and those
using GNU extensions that do not contradict it.  For example,
@samp{-std=c90} turns off certain features of GCC that are
incompatible with ISO C90, such as the @code{asm} and @code{typeof}
keywords, but not other GNU extensions that do not have a meaning in
ISO C90, such as omitting the middle term of a @code{?:}
expression. On the other hand, by specifying a GNU dialect of a
standard, all features the compiler support are enabled, even when
those features change the meaning of the base standard and some
strict-conforming programs may be rejected.  The particular standard
is used by @option{-pedantic} to identify which features are GNU
extensions given that version of the standard. For example
@samp{-std=gnu90 -pedantic} would warn about C++ style @samp{//}
comments, while @samp{-std=gnu99 -pedantic} would not.

A value for this option must be provided; possible values are

@table @samp
@item c90
@itemx c89
@itemx iso9899:1990
Support all ISO C90 programs (certain GNU extensions that conflict
with ISO C90 are disabled). Same as @option{-ansi} for C code.

@item iso9899:199409
ISO C90 as modified in amendment 1.

@item c99
@itemx c9x
@itemx iso9899:1999
@itemx iso9899:199x
ISO C99.  Note that this standard is not yet fully supported; see
@w{@uref{http://gcc.gnu.org/c99status.html}} for more information.  The
names @samp{c9x} and @samp{iso9899:199x} are deprecated.

@item c11
@itemx c1x
@itemx iso9899:2011
ISO C11, the 2011 revision of the ISO C standard.
Support is incomplete and experimental.  The name @samp{c1x} is
deprecated.

@item gnu90
@itemx gnu89
GNU dialect of ISO C90 (including some C99 features). This
is the default for C code.

@item gnu99
@itemx gnu9x
GNU dialect of ISO C99.  When ISO C99 is fully implemented in GCC,
this will become the default.  The name @samp{gnu9x} is deprecated.

@item gnu11
@item gnu1x
GNU dialect of ISO C11.  Support is incomplete and experimental.  The
name @samp{gnu1x} is deprecated.

@item c++98
The 1998 ISO C++ standard plus amendments. Same as @option{-ansi} for
C++ code.

@item gnu++98
GNU dialect of @option{-std=c++98}.  This is the default for
C++ code.

@item c++11
The 2011 ISO C++ standard plus amendments.  Support for C++11 is still
experimental, and may change in incompatible ways in future releases.

@item gnu++11
GNU dialect of @option{-std=c++11}. Support for C++11 is still
experimental, and may change in incompatible ways in future releases.
@end table

@item -fgnu89-inline
@opindex fgnu89-inline
The option @option{-fgnu89-inline} tells GCC to use the traditional
GNU semantics for @code{inline} functions when in C99 mode.
@xref{Inline,,An Inline Function is As Fast As a Macro}.  This option
is accepted and ignored by GCC versions 4.1.3 up to but not including
4.3.  In GCC versions 4.3 and later it changes the behavior of GCC in
C99 mode.  Using this option is roughly equivalent to adding the
@code{gnu_inline} function attribute to all inline functions
(@pxref{Function Attributes}).

The option @option{-fno-gnu89-inline} explicitly tells GCC to use the
C99 semantics for @code{inline} when in C99 or gnu99 mode (i.e., it
specifies the default behavior).  This option was first supported in
GCC 4.3.  This option is not supported in @option{-std=c90} or
@option{-std=gnu90} mode.

The preprocessor macros @code{__GNUC_GNU_INLINE__} and
@code{__GNUC_STDC_INLINE__} may be used to check which semantics are
in effect for @code{inline} functions.  @xref{Common Predefined
Macros,,,cpp,The C Preprocessor}.

@item -aux-info @var{filename}
@opindex aux-info
Output to the given filename prototyped declarations for all functions
declared and/or defined in a translation unit, including those in header
files.  This option is silently ignored in any language other than C@.

Besides declarations, the file indicates, in comments, the origin of
each declaration (source file and line), whether the declaration was
implicit, prototyped or unprototyped (@samp{I}, @samp{N} for new or
@samp{O} for old, respectively, in the first character after the line
number and the colon), and whether it came from a declaration or a
definition (@samp{C} or @samp{F}, respectively, in the following
character).  In the case of function definitions, a K&R-style list of
arguments followed by their declarations is also provided, inside
comments, after the declaration.

@item -fallow-parameterless-variadic-functions
Accept variadic functions without named parameters.

Although it is possible to define such a function, this is not very
useful as it is not possible to read the arguments.  This is only
supported for C as this construct is allowed by C++.

@item -fno-asm
@opindex fno-asm
Do not recognize @code{asm}, @code{inline} or @code{typeof} as a
keyword, so that code can use these words as identifiers.  You can use
the keywords @code{__asm__}, @code{__inline__} and @code{__typeof__}
instead.  @option{-ansi} implies @option{-fno-asm}.

In C++, this switch only affects the @code{typeof} keyword, since
@code{asm} and @code{inline} are standard keywords.  You may want to
use the @option{-fno-gnu-keywords} flag instead, which has the same
effect.  In C99 mode (@option{-std=c99} or @option{-std=gnu99}), this
switch only affects the @code{asm} and @code{typeof} keywords, since
@code{inline} is a standard keyword in ISO C99.

@item -fno-builtin
@itemx -fno-builtin-@var{function}
@opindex fno-builtin
@cindex built-in functions
Don't recognize built-in functions that do not begin with
@samp{__builtin_} as prefix.  @xref{Other Builtins,,Other built-in
functions provided by GCC}, for details of the functions affected,
including those which are not built-in functions when @option{-ansi} or
@option{-std} options for strict ISO C conformance are used because they
do not have an ISO standard meaning.

GCC normally generates special code to handle certain built-in functions
more efficiently; for instance, calls to @code{alloca} may become single
instructions that adjust the stack directly, and calls to @code{memcpy}
may become inline copy loops.  The resulting code is often both smaller
and faster, but since the function calls no longer appear as such, you
cannot set a breakpoint on those calls, nor can you change the behavior
of the functions by linking with a different library.  In addition,
when a function is recognized as a built-in function, GCC may use
information about that function to warn about problems with calls to
that function, or to generate more efficient code, even if the
resulting code still contains calls to that function.  For example,
warnings are given with @option{-Wformat} for bad calls to
@code{printf}, when @code{printf} is built in, and @code{strlen} is
known not to modify global memory.

With the @option{-fno-builtin-@var{function}} option
only the built-in function @var{function} is
disabled.  @var{function} must not begin with @samp{__builtin_}.  If a
function is named that is not built-in in this version of GCC, this
option is ignored.  There is no corresponding
@option{-fbuiltin-@var{function}} option; if you wish to enable
built-in functions selectively when using @option{-fno-builtin} or
@option{-ffreestanding}, you may define macros such as:

@smallexample
#define abs(n)          __builtin_abs ((n))
#define strcpy(d, s)    __builtin_strcpy ((d), (s))
@end smallexample

@item -fhosted
@opindex fhosted
@cindex hosted environment

Assert that compilation takes place in a hosted environment.  This implies
@option{-fbuiltin}.  A hosted environment is one in which the
entire standard library is available, and in which @code{main} has a return
type of @code{int}.  Examples are nearly everything except a kernel.
This is equivalent to @option{-fno-freestanding}.

@item -ffreestanding
@opindex ffreestanding
@cindex hosted environment

Assert that compilation takes place in a freestanding environment.  This
implies @option{-fno-builtin}.  A freestanding environment
is one in which the standard library may not exist, and program startup may
not necessarily be at @code{main}.  The most obvious example is an OS kernel.
This is equivalent to @option{-fno-hosted}.

@xref{Standards,,Language Standards Supported by GCC}, for details of
freestanding and hosted environments.

@item -fopenmp
@opindex fopenmp
@cindex OpenMP parallel
Enable handling of OpenMP directives @code{#pragma omp} in C/C++ and
@code{!$omp} in Fortran.  When @option{-fopenmp} is specified, the
compiler generates parallel code according to the OpenMP Application
Program Interface v3.0 @w{@uref{http://www.openmp.org/}}.  This option
implies @option{-pthread}, and thus is only supported on targets that
have support for @option{-pthread}.

@item -fgnu-tm
@opindex fgnu-tm
When the option @option{-fgnu-tm} is specified, the compiler will
generate code for the Linux variant of Intel's current Transactional
Memory ABI specification document (Revision 1.1, May 6 2009).  This is
an experimental feature whose interface may change in future versions
of GCC, as the official specification changes.  Please note that not
all architectures are supported for this feature.

For more information on GCC's support for transactional memory,
@xref{Enabling libitm,,The GNU Transactional Memory Library,libitm,GNU
Transactional Memory Library}.

@item -fms-extensions
@opindex fms-extensions
Accept some non-standard constructs used in Microsoft header files.

In C++ code, this allows member names in structures to be similar
to previous types declarations.

@smallexample
typedef int UOW;
struct ABC @{
  UOW UOW;
@};
@end smallexample

Some cases of unnamed fields in structures and unions are only
accepted with this option.  @xref{Unnamed Fields,,Unnamed struct/union
fields within structs/unions}, for details.

@item -fplan9-extensions
Accept some non-standard constructs used in Plan 9 code.

This enables @option{-fms-extensions}, permits passing pointers to
structures with anonymous fields to functions which expect pointers to
elements of the type of the field, and permits referring to anonymous
fields declared using a typedef.  @xref{Unnamed Fields,,Unnamed
struct/union fields within structs/unions}, for details.  This is only
supported for C, not C++.

@item -trigraphs
@opindex trigraphs
Support ISO C trigraphs.  The @option{-ansi} option (and @option{-std}
options for strict ISO C conformance) implies @option{-trigraphs}.

@item -no-integrated-cpp
@opindex no-integrated-cpp
Performs a compilation in two passes: preprocessing and compiling.  This
option allows a user supplied "cc1", "cc1plus", or "cc1obj" via the
@option{-B} option.  The user supplied compilation step can then add in
an additional preprocessing step after normal preprocessing but before
compiling.  The default is to use the integrated cpp (internal cpp)

The semantics of this option will change if "cc1", "cc1plus", and
"cc1obj" are merged.

@cindex traditional C language
@cindex C language, traditional
@item -traditional
@itemx -traditional-cpp
@opindex traditional-cpp
@opindex traditional
Formerly, these options caused GCC to attempt to emulate a pre-standard
C compiler.  They are now only supported with the @option{-E} switch.
The preprocessor continues to support a pre-standard mode.  See the GNU
CPP manual for details.

@item -fcond-mismatch
@opindex fcond-mismatch
Allow conditional expressions with mismatched types in the second and
third arguments.  The value of such an expression is void.  This option
is not supported for C++.

@item -flax-vector-conversions
@opindex flax-vector-conversions
Allow implicit conversions between vectors with differing numbers of
elements and/or incompatible element types.  This option should not be
used for new code.

@item -funsigned-char
@opindex funsigned-char
Let the type @code{char} be unsigned, like @code{unsigned char}.

Each kind of machine has a default for what @code{char} should
be.  It is either like @code{unsigned char} by default or like
@code{signed char} by default.

Ideally, a portable program should always use @code{signed char} or
@code{unsigned char} when it depends on the signedness of an object.
But many programs have been written to use plain @code{char} and
expect it to be signed, or expect it to be unsigned, depending on the
machines they were written for.  This option, and its inverse, let you
make such a program work with the opposite default.

The type @code{char} is always a distinct type from each of
@code{signed char} or @code{unsigned char}, even though its behavior
is always just like one of those two.

@item -fsigned-char
@opindex fsigned-char
Let the type @code{char} be signed, like @code{signed char}.

Note that this is equivalent to @option{-fno-unsigned-char}, which is
the negative form of @option{-funsigned-char}.  Likewise, the option
@option{-fno-signed-char} is equivalent to @option{-funsigned-char}.

@item -fsigned-bitfields
@itemx -funsigned-bitfields
@itemx -fno-signed-bitfields
@itemx -fno-unsigned-bitfields
@opindex fsigned-bitfields
@opindex funsigned-bitfields
@opindex fno-signed-bitfields
@opindex fno-unsigned-bitfields
These options control whether a bit-field is signed or unsigned, when the
declaration does not use either @code{signed} or @code{unsigned}.  By
default, such a bit-field is signed, because this is consistent: the
basic integer types such as @code{int} are signed types.
@end table

@node C++ Dialect Options
@section Options Controlling C++ Dialect

@cindex compiler options, C++
@cindex C++ options, command line
@cindex options, C++
This section describes the command-line options that are only meaningful
for C++ programs; but you can also use most of the GNU compiler options
regardless of what language your program is in.  For example, you
might compile a file @code{firstClass.C} like this:

@smallexample
g++ -g -frepo -O -c firstClass.C
@end smallexample

@noindent
In this example, only @option{-frepo} is an option meant
only for C++ programs; you can use the other options with any
language supported by GCC@.

Here is a list of options that are @emph{only} for compiling C++ programs:

@table @gcctabopt

@item -fabi-version=@var{n}
@opindex fabi-version
Use version @var{n} of the C++ ABI@.  Version 2 is the version of the
C++ ABI that first appeared in G++ 3.4.  Version 1 is the version of
the C++ ABI that first appeared in G++ 3.2.  Version 0 will always be
the version that conforms most closely to the C++ ABI specification.
Therefore, the ABI obtained using version 0 will change as ABI bugs
are fixed.

The default is version 2.

Version 3 corrects an error in mangling a constant address as a
template argument.

Version 4 implements a standard mangling for vector types.

Version 5 corrects the mangling of attribute const/volatile on
function pointer types, decltype of a plain decl, and use of a
function parameter in the declaration of another parameter.

Version 6 corrects the promotion behavior of C++11 scoped enums.

See also @option{-Wabi}.

@item -fno-access-control
@opindex fno-access-control
Turn off all access checking.  This switch is mainly useful for working
around bugs in the access control code.

@item -fcheck-new
@opindex fcheck-new
Check that the pointer returned by @code{operator new} is non-null
before attempting to modify the storage allocated.  This check is
normally unnecessary because the C++ standard specifies that
@code{operator new} will only return @code{0} if it is declared
@samp{throw()}, in which case the compiler will always check the
return value even without this option.  In all other cases, when
@code{operator new} has a non-empty exception specification, memory
exhaustion is signalled by throwing @code{std::bad_alloc}.  See also
@samp{new (nothrow)}.

@item -fconserve-space
@opindex fconserve-space
Put uninitialized or runtime-initialized global variables into the
common segment, as C does.  This saves space in the executable at the
cost of not diagnosing duplicate definitions.  If you compile with this
flag and your program mysteriously crashes after @code{main()} has
completed, you may have an object that is being destroyed twice because
two definitions were merged.

This option is no longer useful on most targets, now that support has
been added for putting variables into BSS without making them common.

@item -fconstexpr-depth=@var{n}
@opindex fconstexpr-depth
Set the maximum nested evaluation depth for C++11 constexpr functions
to @var{n}.  A limit is needed to detect endless recursion during
constant expression evaluation.  The minimum specified by the standard
is 512.

@item -fdeduce-init-list
@opindex fdeduce-init-list
Enable deduction of a template type parameter as
std::initializer_list from a brace-enclosed initializer list, i.e.

@smallexample
template <class T> auto forward(T t) -> decltype (realfn (t))
@{
  return realfn (t);
@}

void f()
@{
  forward(@{1,2@}); // call forward<std::initializer_list<int>>
@}
@end smallexample

This deduction was implemented as a possible extension to the
originally proposed semantics for the C++11 standard, but was not part
of the final standard, so it is disabled by default.  This option is
deprecated, and may be removed in a future version of G++.

@item -ffriend-injection
@opindex ffriend-injection
Inject friend functions into the enclosing namespace, so that they are
visible outside the scope of the class in which they are declared.
Friend functions were documented to work this way in the old Annotated
C++ Reference Manual, and versions of G++ before 4.1 always worked
that way.  However, in ISO C++ a friend function which is not declared
in an enclosing scope can only be found using argument dependent
lookup.  This option causes friends to be injected as they were in
earlier releases.

This option is for compatibility, and may be removed in a future
release of G++.

@item -fno-elide-constructors
@opindex fno-elide-constructors
The C++ standard allows an implementation to omit creating a temporary
which is only used to initialize another object of the same type.
Specifying this option disables that optimization, and forces G++ to
call the copy constructor in all cases.

@item -fno-enforce-eh-specs
@opindex fno-enforce-eh-specs
Don't generate code to check for violation of exception specifications
at runtime.  This option violates the C++ standard, but may be useful
for reducing code size in production builds, much like defining
@samp{NDEBUG}.  This does not give user code permission to throw
exceptions in violation of the exception specifications; the compiler
will still optimize based on the specifications, so throwing an
unexpected exception will result in undefined behavior.

@item -ffor-scope
@itemx -fno-for-scope
@opindex ffor-scope
@opindex fno-for-scope
If @option{-ffor-scope} is specified, the scope of variables declared in
a @i{for-init-statement} is limited to the @samp{for} loop itself,
as specified by the C++ standard.
If @option{-fno-for-scope} is specified, the scope of variables declared in
a @i{for-init-statement} extends to the end of the enclosing scope,
as was the case in old versions of G++, and other (traditional)
implementations of C++.

The default if neither flag is given to follow the standard,
but to allow and give a warning for old-style code that would
otherwise be invalid, or have different behavior.

@item -fno-gnu-keywords
@opindex fno-gnu-keywords
Do not recognize @code{typeof} as a keyword, so that code can use this
word as an identifier.  You can use the keyword @code{__typeof__} instead.
@option{-ansi} implies @option{-fno-gnu-keywords}.

@item -fno-implicit-templates
@opindex fno-implicit-templates
Never emit code for non-inline templates which are instantiated
implicitly (i.e.@: by use); only emit code for explicit instantiations.
@xref{Template Instantiation}, for more information.

@item -fno-implicit-inline-templates
@opindex fno-implicit-inline-templates
Don't emit code for implicit instantiations of inline templates, either.
The default is to handle inlines differently so that compiles with and
without optimization will need the same set of explicit instantiations.

@item -fno-implement-inlines
@opindex fno-implement-inlines
To save space, do not emit out-of-line copies of inline functions
controlled by @samp{#pragma implementation}.  This will cause linker
errors if these functions are not inlined everywhere they are called.

@item -fms-extensions
@opindex fms-extensions
Disable pedantic warnings about constructs used in MFC, such as implicit
int and getting a pointer to member function via non-standard syntax.

@item -fno-nonansi-builtins
@opindex fno-nonansi-builtins
Disable built-in declarations of functions that are not mandated by
ANSI/ISO C@.  These include @code{ffs}, @code{alloca}, @code{_exit},
@code{index}, @code{bzero}, @code{conjf}, and other related functions.

@item -fnothrow-opt
@opindex fnothrow-opt
Treat a @code{throw()} exception specification as though it were a
@code{noexcept} specification to reduce or eliminate the text size
overhead relative to a function with no exception specification.  If
the function has local variables of types with non-trivial
destructors, the exception specification will actually make the
function smaller because the EH cleanups for those variables can be
optimized away.  The semantic effect is that an exception thrown out of
a function with such an exception specification will result in a call
to @code{terminate} rather than @code{unexpected}.

@item -fno-operator-names
@opindex fno-operator-names
Do not treat the operator name keywords @code{and}, @code{bitand},
@code{bitor}, @code{compl}, @code{not}, @code{or} and @code{xor} as
synonyms as keywords.

@item -fno-optional-diags
@opindex fno-optional-diags
Disable diagnostics that the standard says a compiler does not need to
issue.  Currently, the only such diagnostic issued by G++ is the one for
a name having multiple meanings within a class.

@item -fpermissive
@opindex fpermissive
Downgrade some diagnostics about nonconformant code from errors to
warnings.  Thus, using @option{-fpermissive} will allow some
nonconforming code to compile.

@item -fno-pretty-templates
@opindex fno-pretty-templates
When an error message refers to a specialization of a function
template, the compiler will normally print the signature of the
template followed by the template arguments and any typedefs or
typenames in the signature (e.g. @code{void f(T) [with T = int]}
rather than @code{void f(int)}) so that it's clear which template is
involved.  When an error message refers to a specialization of a class
template, the compiler will omit any template arguments which match
the default template arguments for that template.  If either of these
behaviors make it harder to understand the error message rather than
easier, using @option{-fno-pretty-templates} will disable them.

@item -frepo
@opindex frepo
Enable automatic template instantiation at link time.  This option also
implies @option{-fno-implicit-templates}.  @xref{Template
Instantiation}, for more information.

@item -fno-rtti
@opindex fno-rtti
Disable generation of information about every class with virtual
functions for use by the C++ runtime type identification features
(@samp{dynamic_cast} and @samp{typeid}).  If you don't use those parts
of the language, you can save some space by using this flag.  Note that
exception handling uses the same information, but it will generate it as
needed. The @samp{dynamic_cast} operator can still be used for casts that
do not require runtime type information, i.e.@: casts to @code{void *} or to
unambiguous base classes.

@item -fstats
@opindex fstats
Emit statistics about front-end processing at the end of the compilation.
This information is generally only useful to the G++ development team.

@item -fstrict-enums
@opindex fstrict-enums
Allow the compiler to optimize using the assumption that a value of
enumeration type can only be one of the values of the enumeration (as
defined in the C++ standard; basically, a value which can be
represented in the minimum number of bits needed to represent all the
enumerators).  This assumption may not be valid if the program uses a
cast to convert an arbitrary integer value to the enumeration type.

@item -ftemplate-depth=@var{n}
@opindex ftemplate-depth
Set the maximum instantiation depth for template classes to @var{n}.
A limit on the template instantiation depth is needed to detect
endless recursions during template class instantiation.  ANSI/ISO C++
conforming programs must not rely on a maximum depth greater than 17
(changed to 1024 in C++11).  The default value is 900, as the compiler
can run out of stack space before hitting 1024 in some situations.

@item -fno-threadsafe-statics
@opindex fno-threadsafe-statics
Do not emit the extra code to use the routines specified in the C++
ABI for thread-safe initialization of local statics.  You can use this
option to reduce code size slightly in code that doesn't need to be
thread-safe.

@item -fuse-cxa-atexit
@opindex fuse-cxa-atexit
Register destructors for objects with static storage duration with the
@code{__cxa_atexit} function rather than the @code{atexit} function.
This option is required for fully standards-compliant handling of static
destructors, but will only work if your C library supports
@code{__cxa_atexit}.

@item -fno-use-cxa-get-exception-ptr
@opindex fno-use-cxa-get-exception-ptr
Don't use the @code{__cxa_get_exception_ptr} runtime routine.  This
will cause @code{std::uncaught_exception} to be incorrect, but is necessary
if the runtime routine is not available.

@item -fvisibility-inlines-hidden
@opindex fvisibility-inlines-hidden
This switch declares that the user does not attempt to compare
pointers to inline functions or methods where the addresses of the two functions
were taken in different shared objects.

The effect of this is that GCC may, effectively, mark inline methods with
@code{__attribute__ ((visibility ("hidden")))} so that they do not
appear in the export table of a DSO and do not require a PLT indirection
when used within the DSO@.  Enabling this option can have a dramatic effect
on load and link times of a DSO as it massively reduces the size of the
dynamic export table when the library makes heavy use of templates.

The behavior of this switch is not quite the same as marking the
methods as hidden directly, because it does not affect static variables
local to the function or cause the compiler to deduce that
the function is defined in only one shared object.

You may mark a method as having a visibility explicitly to negate the
effect of the switch for that method.  For example, if you do want to
compare pointers to a particular inline method, you might mark it as
having default visibility.  Marking the enclosing class with explicit
visibility will have no effect.

Explicitly instantiated inline methods are unaffected by this option
as their linkage might otherwise cross a shared library boundary.
@xref{Template Instantiation}.

@item -fvisibility-ms-compat
@opindex fvisibility-ms-compat
This flag attempts to use visibility settings to make GCC's C++
linkage model compatible with that of Microsoft Visual Studio.

The flag makes these changes to GCC's linkage model:

@enumerate
@item
It sets the default visibility to @code{hidden}, like
@option{-fvisibility=hidden}.

@item
Types, but not their members, are not hidden by default.

@item
The One Definition Rule is relaxed for types without explicit
visibility specifications which are defined in more than one different
shared object: those declarations are permitted if they would have
been permitted when this option was not used.
@end enumerate

In new code it is better to use @option{-fvisibility=hidden} and
export those classes which are intended to be externally visible.
Unfortunately it is possible for code to rely, perhaps accidentally,
on the Visual Studio behavior.

Among the consequences of these changes are that static data members
of the same type with the same name but defined in different shared
objects will be different, so changing one will not change the other;
and that pointers to function members defined in different shared
objects may not compare equal.  When this flag is given, it is a
violation of the ODR to define types with the same name differently.

@item -fno-weak
@opindex fno-weak
Do not use weak symbol support, even if it is provided by the linker.
By default, G++ will use weak symbols if they are available.  This
option exists only for testing, and should not be used by end-users;
it will result in inferior code and has no benefits.  This option may
be removed in a future release of G++.

@item -nostdinc++
@opindex nostdinc++
Do not search for header files in the standard directories specific to
C++, but do still search the other standard directories.  (This option
is used when building the C++ library.)
@end table

In addition, these optimization, warning, and code generation options
have meanings only for C++ programs:

@table @gcctabopt
@item -fno-default-inline
@opindex fno-default-inline
Do not assume @samp{inline} for functions defined inside a class scope.
@xref{Optimize Options,,Options That Control Optimization}.  Note that these
functions will have linkage like inline functions; they just won't be
inlined by default.

@item -Wabi @r{(C, Objective-C, C++ and Objective-C++ only)}
@opindex Wabi
@opindex Wno-abi
Warn when G++ generates code that is probably not compatible with the
vendor-neutral C++ ABI@.  Although an effort has been made to warn about
all such cases, there are probably some cases that are not warned about,
even though G++ is generating incompatible code.  There may also be
cases where warnings are emitted even though the code that is generated
will be compatible.

You should rewrite your code to avoid these warnings if you are
concerned about the fact that code generated by G++ may not be binary
compatible with code generated by other compilers.

The known incompatibilities in @option{-fabi-version=2} (the default) include:

@itemize @bullet

@item
A template with a non-type template parameter of reference type is
mangled incorrectly:
@smallexample
extern int N;
template <int &> struct S @{@};
void n (S<N>) @{2@}
@end smallexample

This is fixed in @option{-fabi-version=3}.

@item
SIMD vector types declared using @code{__attribute ((vector_size))} are
mangled in a non-standard way that does not allow for overloading of
functions taking vectors of different sizes.

The mangling is changed in @option{-fabi-version=4}.
@end itemize

The known incompatibilities in @option{-fabi-version=1} include:

@itemize @bullet

@item
Incorrect handling of tail-padding for bit-fields.  G++ may attempt to
pack data into the same byte as a base class.  For example:

@smallexample
struct A @{ virtual void f(); int f1 : 1; @};
struct B : public A @{ int f2 : 1; @};
@end smallexample

@noindent
In this case, G++ will place @code{B::f2} into the same byte
as@code{A::f1}; other compilers will not.  You can avoid this problem
by explicitly padding @code{A} so that its size is a multiple of the
byte size on your platform; that will cause G++ and other compilers to
layout @code{B} identically.

@item
Incorrect handling of tail-padding for virtual bases.  G++ does not use
tail padding when laying out virtual bases.  For example:

@smallexample
struct A @{ virtual void f(); char c1; @};
struct B @{ B(); char c2; @};
struct C : public A, public virtual B @{@};
@end smallexample

@noindent
In this case, G++ will not place @code{B} into the tail-padding for
@code{A}; other compilers will.  You can avoid this problem by
explicitly padding @code{A} so that its size is a multiple of its
alignment (ignoring virtual base classes); that will cause G++ and other
compilers to layout @code{C} identically.

@item
Incorrect handling of bit-fields with declared widths greater than that
of their underlying types, when the bit-fields appear in a union.  For
example:

@smallexample
union U @{ int i : 4096; @};
@end smallexample

@noindent
Assuming that an @code{int} does not have 4096 bits, G++ will make the
union too small by the number of bits in an @code{int}.

@item
Empty classes can be placed at incorrect offsets.  For example:

@smallexample
struct A @{@};

struct B @{
  A a;
  virtual void f ();
@};

struct C : public B, public A @{@};
@end smallexample

@noindent
G++ will place the @code{A} base class of @code{C} at a nonzero offset;
it should be placed at offset zero.  G++ mistakenly believes that the
@code{A} data member of @code{B} is already at offset zero.

@item
Names of template functions whose types involve @code{typename} or
template template parameters can be mangled incorrectly.

@smallexample
template <typename Q>
void f(typename Q::X) @{@}

template <template <typename> class Q>
void f(typename Q<int>::X) @{@}
@end smallexample

@noindent
Instantiations of these templates may be mangled incorrectly.

@end itemize

It also warns psABI related changes.  The known psABI changes at this
point include:

@itemize @bullet

@item
For SYSV/x86-64, when passing union with long double, it is changed to
pass in memory as specified in psABI.  For example:

@smallexample
union U @{
  long double ld;
  int i;
@};
@end smallexample

@noindent
@code{union U} will always be passed in memory.

@end itemize

@item -Wctor-dtor-privacy @r{(C++ and Objective-C++ only)}
@opindex Wctor-dtor-privacy
@opindex Wno-ctor-dtor-privacy
Warn when a class seems unusable because all the constructors or
destructors in that class are private, and it has neither friends nor
public static member functions.

@item -Wdelete-non-virtual-dtor @r{(C++ and Objective-C++ only)}
@opindex Wdelete-non-virtual-dtor
@opindex Wno-delete-non-virtual-dtor
Warn when @samp{delete} is used to destroy an instance of a class which
has virtual functions and non-virtual destructor. It is unsafe to delete
an instance of a derived class through a pointer to a base class if the
base class does not have a virtual destructor.  This warning is enabled
by @option{-Wall}.

@item -Wnarrowing @r{(C++ and Objective-C++ only)}
@opindex Wnarrowing
@opindex Wno-narrowing
Warn when a narrowing conversion prohibited by C++11 occurs within
@samp{@{ @}}, e.g.

@smallexample
int i = @{ 2.2 @}; // error: narrowing from double to int
@end smallexample

This flag is included in @option{-Wall} and @option{-Wc++11-compat}.

With -std=c++11, @option{-Wno-narrowing} suppresses the diagnostic
required by the standard.  Note that this does not affect the meaning
of well-formed code; narrowing conversions are still considered
ill-formed in SFINAE context.

@item -Wnoexcept @r{(C++ and Objective-C++ only)}
@opindex Wnoexcept
@opindex Wno-noexcept
Warn when a noexcept-expression evaluates to false because of a call
to a function that does not have a non-throwing exception
specification (i.e. @samp{throw()} or @samp{noexcept}) but is known by
the compiler to never throw an exception.

@item -Wnon-virtual-dtor @r{(C++ and Objective-C++ only)}
@opindex Wnon-virtual-dtor
@opindex Wno-non-virtual-dtor
Warn when a class has virtual functions and accessible non-virtual
destructor, in which case it would be possible but unsafe to delete
an instance of a derived class through a pointer to the base class.
This warning is also enabled if -Weffc++ is specified.

@item -Wreorder @r{(C++ and Objective-C++ only)}
@opindex Wreorder
@opindex Wno-reorder
@cindex reordering, warning
@cindex warning for reordering of member initializers
Warn when the order of member initializers given in the code does not
match the order in which they must be executed.  For instance:

@smallexample
struct A @{
  int i;
  int j;
  A(): j (0), i (1) @{ @}
@};
@end smallexample

The compiler will rearrange the member initializers for @samp{i}
and @samp{j} to match the declaration order of the members, emitting
a warning to that effect.  This warning is enabled by @option{-Wall}.
@end table

The following @option{-W@dots{}} options are not affected by @option{-Wall}.

@table @gcctabopt
@item -Weffc++ @r{(C++ and Objective-C++ only)}
@opindex Weffc++
@opindex Wno-effc++
Warn about violations of the following style guidelines from Scott Meyers'
@cite{Effective C++} book:

@itemize @bullet
@item
Item 11:  Define a copy constructor and an assignment operator for classes
with dynamically allocated memory.

@item
Item 12:  Prefer initialization to assignment in constructors.

@item
Item 14:  Make destructors virtual in base classes.

@item
Item 15:  Have @code{operator=} return a reference to @code{*this}.

@item
Item 23:  Don't try to return a reference when you must return an object.

@end itemize

Also warn about violations of the following style guidelines from
Scott Meyers' @cite{More Effective C++} book:

@itemize @bullet
@item
Item 6:  Distinguish between prefix and postfix forms of increment and
decrement operators.

@item
Item 7:  Never overload @code{&&}, @code{||}, or @code{,}.

@end itemize

When selecting this option, be aware that the standard library
headers do not obey all of these guidelines; use @samp{grep -v}
to filter out those warnings.

@item -Wstrict-null-sentinel @r{(C++ and Objective-C++ only)}
@opindex Wstrict-null-sentinel
@opindex Wno-strict-null-sentinel
Warn also about the use of an uncasted @code{NULL} as sentinel.  When
compiling only with GCC this is a valid sentinel, as @code{NULL} is defined
to @code{__null}.  Although it is a null pointer constant not a null pointer,
it is guaranteed to be of the same size as a pointer.  But this use is
not portable across different compilers.

@item -Wno-non-template-friend @r{(C++ and Objective-C++ only)}
@opindex Wno-non-template-friend
@opindex Wnon-template-friend
Disable warnings when non-templatized friend functions are declared
within a template.  Since the advent of explicit template specification
support in G++, if the name of the friend is an unqualified-id (i.e.,
@samp{friend foo(int)}), the C++ language specification demands that the
friend declare or define an ordinary, nontemplate function.  (Section
14.5.3).  Before G++ implemented explicit specification, unqualified-ids
could be interpreted as a particular specialization of a templatized
function.  Because this non-conforming behavior is no longer the default
behavior for G++, @option{-Wnon-template-friend} allows the compiler to
check existing code for potential trouble spots and is on by default.
This new compiler behavior can be turned off with
@option{-Wno-non-template-friend} which keeps the conformant compiler code
but disables the helpful warning.

@item -Wold-style-cast @r{(C++ and Objective-C++ only)}
@opindex Wold-style-cast
@opindex Wno-old-style-cast
Warn if an old-style (C-style) cast to a non-void type is used within
a C++ program.  The new-style casts (@samp{dynamic_cast},
@samp{static_cast}, @samp{reinterpret_cast}, and @samp{const_cast}) are
less vulnerable to unintended effects and much easier to search for.

@item -Woverloaded-virtual @r{(C++ and Objective-C++ only)}
@opindex Woverloaded-virtual
@opindex Wno-overloaded-virtual
@cindex overloaded virtual function, warning
@cindex warning for overloaded virtual function
Warn when a function declaration hides virtual functions from a
base class.  For example, in:

@smallexample
struct A @{
  virtual void f();
@};

struct B: public A @{
  void f(int);
@};
@end smallexample

the @code{A} class version of @code{f} is hidden in @code{B}, and code
like:

@smallexample
B* b;
b->f();
@end smallexample

will fail to compile.

@item -Wno-pmf-conversions @r{(C++ and Objective-C++ only)}
@opindex Wno-pmf-conversions
@opindex Wpmf-conversions
Disable the diagnostic for converting a bound pointer to member function
to a plain pointer.

@item -Wsign-promo @r{(C++ and Objective-C++ only)}
@opindex Wsign-promo
@opindex Wno-sign-promo
Warn when overload resolution chooses a promotion from unsigned or
enumerated type to a signed type, over a conversion to an unsigned type of
the same size.  Previous versions of G++ would try to preserve
unsignedness, but the standard mandates the current behavior.

@smallexample
struct A @{
  operator int ();
  A& operator = (int);
@};

main ()
@{
  A a,b;
  a = b;
@}
@end smallexample

In this example, G++ will synthesize a default @samp{A& operator =
(const A&);}, while cfront will use the user-defined @samp{operator =}.
@end table

@node Objective-C and Objective-C++ Dialect Options
@section Options Controlling Objective-C and Objective-C++ Dialects

@cindex compiler options, Objective-C and Objective-C++
@cindex Objective-C and Objective-C++ options, command line
@cindex options, Objective-C and Objective-C++
(NOTE: This manual does not describe the Objective-C and Objective-C++
languages themselves.  @xref{Standards,,Language Standards
Supported by GCC}, for references.)

This section describes the command-line options that are only meaningful
for Objective-C and Objective-C++ programs, but you can also use most of
the language-independent GNU compiler options.
For example, you might compile a file @code{some_class.m} like this:

@smallexample
gcc -g -fgnu-runtime -O -c some_class.m
@end smallexample

@noindent
In this example, @option{-fgnu-runtime} is an option meant only for
Objective-C and Objective-C++ programs; you can use the other options with
any language supported by GCC@.

Note that since Objective-C is an extension of the C language, Objective-C
compilations may also use options specific to the C front-end (e.g.,
@option{-Wtraditional}).  Similarly, Objective-C++ compilations may use
C++-specific options (e.g., @option{-Wabi}).

Here is a list of options that are @emph{only} for compiling Objective-C
and Objective-C++ programs:

@table @gcctabopt
@item -fconstant-string-class=@var{class-name}
@opindex fconstant-string-class
Use @var{class-name} as the name of the class to instantiate for each
literal string specified with the syntax @code{@@"@dots{}"}.  The default
class name is @code{NXConstantString} if the GNU runtime is being used, and
@code{NSConstantString} if the NeXT runtime is being used (see below).  The
@option{-fconstant-cfstrings} option, if also present, will override the
@option{-fconstant-string-class} setting and cause @code{@@"@dots{}"} literals
to be laid out as constant CoreFoundation strings.

@item -fgnu-runtime
@opindex fgnu-runtime
Generate object code compatible with the standard GNU Objective-C
runtime.  This is the default for most types of systems.

@item -fnext-runtime
@opindex fnext-runtime
Generate output compatible with the NeXT runtime.  This is the default
for NeXT-based systems, including Darwin and Mac OS X@.  The macro
@code{__NEXT_RUNTIME__} is predefined if (and only if) this option is
used.

@item -fno-nil-receivers
@opindex fno-nil-receivers
Assume that all Objective-C message dispatches (@code{[receiver
message:arg]}) in this translation unit ensure that the receiver is
not @code{nil}.  This allows for more efficient entry points in the
runtime to be used.  This option is only available in conjunction with
the NeXT runtime and ABI version 0 or 1.

@item -fobjc-abi-version=@var{n}
@opindex fobjc-abi-version
Use version @var{n} of the Objective-C ABI for the selected runtime.
This option is currently supported only for the NeXT runtime.  In that
case, Version 0 is the traditional (32-bit) ABI without support for
properties and other Objective-C 2.0 additions.  Version 1 is the
traditional (32-bit) ABI with support for properties and other
Objective-C 2.0 additions.  Version 2 is the modern (64-bit) ABI.  If
nothing is specified, the default is Version 0 on 32-bit target
machines, and Version 2 on 64-bit target machines.

@item -fobjc-call-cxx-cdtors
@opindex fobjc-call-cxx-cdtors
For each Objective-C class, check if any of its instance variables is a
C++ object with a non-trivial default constructor.  If so, synthesize a
special @code{- (id) .cxx_construct} instance method that will run
non-trivial default constructors on any such instance variables, in order,
and then return @code{self}.  Similarly, check if any instance variable
is a C++ object with a non-trivial destructor, and if so, synthesize a
special @code{- (void) .cxx_destruct} method that will run
all such default destructors, in reverse order.

The @code{- (id) .cxx_construct} and @code{- (void) .cxx_destruct}
methods thusly generated will only operate on instance variables
declared in the current Objective-C class, and not those inherited
from superclasses.  It is the responsibility of the Objective-C
runtime to invoke all such methods in an object's inheritance
hierarchy.  The @code{- (id) .cxx_construct} methods will be invoked
by the runtime immediately after a new object instance is allocated;
the @code{- (void) .cxx_destruct} methods will be invoked immediately
before the runtime deallocates an object instance.

As of this writing, only the NeXT runtime on Mac OS X 10.4 and later has
support for invoking the @code{- (id) .cxx_construct} and
@code{- (void) .cxx_destruct} methods.

@item -fobjc-direct-dispatch
@opindex fobjc-direct-dispatch
Allow fast jumps to the message dispatcher.  On Darwin this is
accomplished via the comm page.

@item -fobjc-exceptions
@opindex fobjc-exceptions
Enable syntactic support for structured exception handling in
Objective-C, similar to what is offered by C++ and Java.  This option
is required to use the Objective-C keywords @code{@@try},
@code{@@throw}, @code{@@catch}, @code{@@finally} and
@code{@@synchronized}.  This option is available with both the GNU
runtime and the NeXT runtime (but not available in conjunction with
the NeXT runtime on Mac OS X 10.2 and earlier).

@item -fobjc-gc
@opindex fobjc-gc
Enable garbage collection (GC) in Objective-C and Objective-C++
programs.  This option is only available with the NeXT runtime; the
GNU runtime has a different garbage collection implementation that
does not require special compiler flags.

@item -fobjc-nilcheck
@opindex fobjc-nilcheck
For the NeXT runtime with version 2 of the ABI, check for a nil
receiver in method invocations before doing the actual method call.
This is the default and can be disabled using
@option{-fno-objc-nilcheck}.  Class methods and super calls are never
checked for nil in this way no matter what this flag is set to.
Currently this flag does nothing when the GNU runtime, or an older
version of the NeXT runtime ABI, is used.

@item -fobjc-std=objc1
@opindex fobjc-std
Conform to the language syntax of Objective-C 1.0, the language
recognized by GCC 4.0.  This only affects the Objective-C additions to
the C/C++ language; it does not affect conformance to C/C++ standards,
which is controlled by the separate C/C++ dialect option flags.  When
this option is used with the Objective-C or Objective-C++ compiler,
any Objective-C syntax that is not recognized by GCC 4.0 is rejected.
This is useful if you need to make sure that your Objective-C code can
be compiled with older versions of GCC.

@item -freplace-objc-classes
@opindex freplace-objc-classes
Emit a special marker instructing @command{ld(1)} not to statically link in
the resulting object file, and allow @command{dyld(1)} to load it in at
run time instead.  This is used in conjunction with the Fix-and-Continue
debugging mode, where the object file in question may be recompiled and
dynamically reloaded in the course of program execution, without the need
to restart the program itself.  Currently, Fix-and-Continue functionality
is only available in conjunction with the NeXT runtime on Mac OS X 10.3
and later.

@item -fzero-link
@opindex fzero-link
When compiling for the NeXT runtime, the compiler ordinarily replaces calls
to @code{objc_getClass("@dots{}")} (when the name of the class is known at
compile time) with static class references that get initialized at load time,
which improves run-time performance.  Specifying the @option{-fzero-link} flag
suppresses this behavior and causes calls to @code{objc_getClass("@dots{}")}
to be retained.  This is useful in Zero-Link debugging mode, since it allows
for individual class implementations to be modified during program execution.
The GNU runtime currently always retains calls to @code{objc_get_class("@dots{}")}
regardless of command line options.

@item -gen-decls
@opindex gen-decls
Dump interface declarations for all classes seen in the source file to a
file named @file{@var{sourcename}.decl}.

@item -Wassign-intercept @r{(Objective-C and Objective-C++ only)}
@opindex Wassign-intercept
@opindex Wno-assign-intercept
Warn whenever an Objective-C assignment is being intercepted by the
garbage collector.

@item -Wno-protocol @r{(Objective-C and Objective-C++ only)}
@opindex Wno-protocol
@opindex Wprotocol
If a class is declared to implement a protocol, a warning is issued for
every method in the protocol that is not implemented by the class.  The
default behavior is to issue a warning for every method not explicitly
implemented in the class, even if a method implementation is inherited
from the superclass.  If you use the @option{-Wno-protocol} option, then
methods inherited from the superclass are considered to be implemented,
and no warning is issued for them.

@item -Wselector @r{(Objective-C and Objective-C++ only)}
@opindex Wselector
@opindex Wno-selector
Warn if multiple methods of different types for the same selector are
found during compilation.  The check is performed on the list of methods
in the final stage of compilation.  Additionally, a check is performed
for each selector appearing in a @code{@@selector(@dots{})}
expression, and a corresponding method for that selector has been found
during compilation.  Because these checks scan the method table only at
the end of compilation, these warnings are not produced if the final
stage of compilation is not reached, for example because an error is
found during compilation, or because the @option{-fsyntax-only} option is
being used.

@item -Wstrict-selector-match @r{(Objective-C and Objective-C++ only)}
@opindex Wstrict-selector-match
@opindex Wno-strict-selector-match
Warn if multiple methods with differing argument and/or return types are
found for a given selector when attempting to send a message using this
selector to a receiver of type @code{id} or @code{Class}.  When this flag
is off (which is the default behavior), the compiler will omit such warnings
if any differences found are confined to types which share the same size
and alignment.

@item -Wundeclared-selector @r{(Objective-C and Objective-C++ only)}
@opindex Wundeclared-selector
@opindex Wno-undeclared-selector
Warn if a @code{@@selector(@dots{})} expression referring to an
undeclared selector is found.  A selector is considered undeclared if no
method with that name has been declared before the
@code{@@selector(@dots{})} expression, either explicitly in an
@code{@@interface} or @code{@@protocol} declaration, or implicitly in
an @code{@@implementation} section.  This option always performs its
checks as soon as a @code{@@selector(@dots{})} expression is found,
while @option{-Wselector} only performs its checks in the final stage of
compilation.  This also enforces the coding style convention
that methods and selectors must be declared before being used.

@item -print-objc-runtime-info
@opindex print-objc-runtime-info
Generate C header describing the largest structure that is passed by
value, if any.

@end table

@node Language Independent Options
@section Options to Control Diagnostic Messages Formatting
@cindex options to control diagnostics formatting
@cindex diagnostic messages
@cindex message formatting

Traditionally, diagnostic messages have been formatted irrespective of
the output device's aspect (e.g.@: its width, @dots{}).  The options described
below can be used to control the diagnostic messages formatting
algorithm, e.g.@: how many characters per line, how often source location
information should be reported.  Right now, only the C++ front end can
honor these options.  However it is expected, in the near future, that
the remaining front ends would be able to digest them correctly.

@table @gcctabopt
@item -fmessage-length=@var{n}
@opindex fmessage-length
Try to format error messages so that they fit on lines of about @var{n}
characters.  The default is 72 characters for @command{g++} and 0 for the rest of
the front ends supported by GCC@.  If @var{n} is zero, then no
line-wrapping will be done; each error message will appear on a single
line.

@opindex fdiagnostics-show-location
@item -fdiagnostics-show-location=once
Only meaningful in line-wrapping mode.  Instructs the diagnostic messages
reporter to emit @emph{once} source location information; that is, in
case the message is too long to fit on a single physical line and has to
be wrapped, the source location won't be emitted (as prefix) again,
over and over, in subsequent continuation lines.  This is the default
behavior.

@item -fdiagnostics-show-location=every-line
Only meaningful in line-wrapping mode.  Instructs the diagnostic
messages reporter to emit the same source location information (as
prefix) for physical lines that result from the process of breaking
a message which is too long to fit on a single line.

@item -fno-diagnostics-show-option
@opindex fno-diagnostics-show-option
@opindex fdiagnostics-show-option
By default, each diagnostic emitted includes text which indicates the
command line option that directly controls the diagnostic (if such an
option is known to the diagnostic machinery).  Specifying the
@option{-fno-diagnostics-show-option} flag suppresses that behavior.

@item -Wcoverage-mismatch
@opindex Wcoverage-mismatch
Warn if feedback profiles do not match when using the
@option{-fprofile-use} option.
If a source file was changed between @option{-fprofile-gen} and
@option{-fprofile-use}, the files with the profile feedback can fail
to match the source file and GCC can not use the profile feedback
information.  By default, this warning is enabled and is treated as an
error.  @option{-Wno-coverage-mismatch} can be used to disable the
warning or @option{-Wno-error=coverage-mismatch} can be used to
disable the error.  Disable the error for this warning can result in
poorly optimized code, so disabling the error is useful only in the
case of very minor changes such as bug fixes to an existing code-base.
Completely disabling the warning is not recommended.

@end table

@node Warning Options
@section Options to Request or Suppress Warnings
@cindex options to control warnings
@cindex warning messages
@cindex messages, warning
@cindex suppressing warnings

Warnings are diagnostic messages that report constructions which
are not inherently erroneous but which are risky or suggest there
may have been an error.

The following language-independent options do not enable specific
warnings but control the kinds of diagnostics produced by GCC.

@table @gcctabopt
@cindex syntax checking
@item -fsyntax-only
@opindex fsyntax-only
Check the code for syntax errors, but don't do anything beyond that.

@item -fmax-errors=@var{n}
@opindex fmax-errors
Limits the maximum number of error messages to @var{n}, at which point
GCC bails out rather than attempting to continue processing the source
code.  If @var{n} is 0 (the default), there is no limit on the number
of error messages produced.  If @option{-Wfatal-errors} is also
specified, then @option{-Wfatal-errors} takes precedence over this
option.

@item -w
@opindex w
Inhibit all warning messages.

@item -Werror
@opindex Werror
@opindex Wno-error
Make all warnings into errors.

@item -Werror=
@opindex Werror=
@opindex Wno-error=
Make the specified warning into an error.  The specifier for a warning
is appended, for example @option{-Werror=switch} turns the warnings
controlled by @option{-Wswitch} into errors.  This switch takes a
negative form, to be used to negate @option{-Werror} for specific
warnings, for example @option{-Wno-error=switch} makes
@option{-Wswitch} warnings not be errors, even when @option{-Werror}
is in effect.

The warning message for each controllable warning includes the
option which controls the warning.  That option can then be used with
@option{-Werror=} and @option{-Wno-error=} as described above.
(Printing of the option in the warning message can be disabled using the
@option{-fno-diagnostics-show-option} flag.)

Note that specifying @option{-Werror=}@var{foo} automatically implies
@option{-W}@var{foo}.  However, @option{-Wno-error=}@var{foo} does not
imply anything.

@item -Wfatal-errors
@opindex Wfatal-errors
@opindex Wno-fatal-errors
This option causes the compiler to abort compilation on the first error
occurred rather than trying to keep going and printing further error
messages.

@end table

You can request many specific warnings with options beginning
@samp{-W}, for example @option{-Wimplicit} to request warnings on
implicit declarations.  Each of these specific warning options also
has a negative form beginning @samp{-Wno-} to turn off warnings; for
example, @option{-Wno-implicit}.  This manual lists only one of the
two forms, whichever is not the default.  For further,
language-specific options also refer to @ref{C++ Dialect Options} and
@ref{Objective-C and Objective-C++ Dialect Options}.

When an unrecognized warning option is requested (e.g.,
@option{-Wunknown-warning}), GCC will emit a diagnostic stating
that the option is not recognized.  However, if the @option{-Wno-} form
is used, the behavior is slightly different: No diagnostic will be
produced for @option{-Wno-unknown-warning} unless other diagnostics
are being produced.  This allows the use of new @option{-Wno-} options
with old compilers, but if something goes wrong, the compiler will
warn that an unrecognized option was used.

@table @gcctabopt
@item -pedantic
@opindex pedantic
Issue all the warnings demanded by strict ISO C and ISO C++;
reject all programs that use forbidden extensions, and some other
programs that do not follow ISO C and ISO C++.  For ISO C, follows the
version of the ISO C standard specified by any @option{-std} option used.

Valid ISO C and ISO C++ programs should compile properly with or without
this option (though a rare few will require @option{-ansi} or a
@option{-std} option specifying the required version of ISO C)@.  However,
without this option, certain GNU extensions and traditional C and C++
features are supported as well.  With this option, they are rejected.

@option{-pedantic} does not cause warning messages for use of the
alternate keywords whose names begin and end with @samp{__}.  Pedantic
warnings are also disabled in the expression that follows
@code{__extension__}.  However, only system header files should use
these escape routes; application programs should avoid them.
@xref{Alternate Keywords}.

Some users try to use @option{-pedantic} to check programs for strict ISO
C conformance.  They soon find that it does not do quite what they want:
it finds some non-ISO practices, but not all---only those for which
ISO C @emph{requires} a diagnostic, and some others for which
diagnostics have been added.

A feature to report any failure to conform to ISO C might be useful in
some instances, but would require considerable additional work and would
be quite different from @option{-pedantic}.  We don't have plans to
support such a feature in the near future.

Where the standard specified with @option{-std} represents a GNU
extended dialect of C, such as @samp{gnu90} or @samp{gnu99}, there is a
corresponding @dfn{base standard}, the version of ISO C on which the GNU
extended dialect is based.  Warnings from @option{-pedantic} are given
where they are required by the base standard.  (It would not make sense
for such warnings to be given only for features not in the specified GNU
C dialect, since by definition the GNU dialects of C include all
features the compiler supports with the given option, and there would be
nothing to warn about.)

@item -pedantic-errors
@opindex pedantic-errors
Like @option{-pedantic}, except that errors are produced rather than
warnings.

@item -Wall
@opindex Wall
@opindex Wno-all
This enables all the warnings about constructions that some users
consider questionable, and that are easy to avoid (or modify to
prevent the warning), even in conjunction with macros.  This also
enables some language-specific warnings described in @ref{C++ Dialect
Options} and @ref{Objective-C and Objective-C++ Dialect Options}.

@option{-Wall} turns on the following warning flags:

@gccoptlist{-Waddress   @gol
-Warray-bounds @r{(only with} @option{-O2}@r{)}  @gol
-Wc++11-compat  @gol
-Wchar-subscripts  @gol
-Wenum-compare @r{(in C/Objc; this is on by default in C++)} @gol
-Wimplicit-int @r{(C and Objective-C only)} @gol
-Wimplicit-function-declaration @r{(C and Objective-C only)} @gol
-Wcomment  @gol
-Wformat   @gol
-Wmain @r{(only for C/ObjC and unless} @option{-ffreestanding}@r{)}  @gol
-Wmaybe-uninitialized @gol
-Wmissing-braces  @gol
-Wnonnull  @gol
-Wparentheses  @gol
-Wpointer-sign  @gol
-Wreorder   @gol
-Wreturn-type  @gol
-Wsequence-point  @gol
-Wsign-compare @r{(only in C++)}  @gol
-Wstrict-aliasing  @gol
-Wstrict-overflow=1  @gol
-Wswitch  @gol
-Wtrigraphs  @gol
-Wuninitialized  @gol
-Wunknown-pragmas  @gol
-Wunused-function  @gol
-Wunused-label     @gol
-Wunused-value     @gol
-Wunused-variable  @gol
-Wvolatile-register-var @gol
}

Note that some warning flags are not implied by @option{-Wall}.  Some of
them warn about constructions that users generally do not consider
questionable, but which occasionally you might wish to check for;
others warn about constructions that are necessary or hard to avoid in
some cases, and there is no simple way to modify the code to suppress
the warning. Some of them are enabled by @option{-Wextra} but many of
them must be enabled individually.

@item -Wextra
@opindex W
@opindex Wextra
@opindex Wno-extra
This enables some extra warning flags that are not enabled by
@option{-Wall}. (This option used to be called @option{-W}.  The older
name is still supported, but the newer name is more descriptive.)

@gccoptlist{-Wclobbered  @gol
-Wempty-body  @gol
-Wignored-qualifiers @gol
-Wmissing-field-initializers  @gol
-Wmissing-parameter-type @r{(C only)}  @gol
-Wold-style-declaration @r{(C only)}  @gol
-Woverride-init  @gol
-Wsign-compare  @gol
-Wtype-limits  @gol
-Wuninitialized  @gol
-Wunused-parameter @r{(only with} @option{-Wunused} @r{or} @option{-Wall}@r{)} @gol
-Wunused-but-set-parameter @r{(only with} @option{-Wunused} @r{or} @option{-Wall}@r{)}  @gol
}

The option @option{-Wextra} also prints warning messages for the
following cases:

@itemize @bullet

@item
A pointer is compared against integer zero with @samp{<}, @samp{<=},
@samp{>}, or @samp{>=}.

@item
(C++ only) An enumerator and a non-enumerator both appear in a
conditional expression.

@item
(C++ only) Ambiguous virtual bases.

@item
(C++ only) Subscripting an array which has been declared @samp{register}.

@item
(C++ only) Taking the address of a variable which has been declared
@samp{register}.

@item
(C++ only) A base class is not initialized in a derived class' copy
constructor.

@end itemize

@item -Wchar-subscripts
@opindex Wchar-subscripts
@opindex Wno-char-subscripts
Warn if an array subscript has type @code{char}.  This is a common cause
of error, as programmers often forget that this type is signed on some
machines.
This warning is enabled by @option{-Wall}.

@item -Wcomment
@opindex Wcomment
@opindex Wno-comment
Warn whenever a comment-start sequence @samp{/*} appears in a @samp{/*}
comment, or whenever a Backslash-Newline appears in a @samp{//} comment.
This warning is enabled by @option{-Wall}.

@item -Wno-cpp
@r{(C, Objective-C, C++, Objective-C++ and Fortran only)}

Suppress warning messages emitted by @code{#warning} directives.

@item -Wdouble-promotion @r{(C, C++, Objective-C and Objective-C++ only)}
@opindex Wdouble-promotion
@opindex Wno-double-promotion
Give a warning when a value of type @code{float} is implicitly
promoted to @code{double}.  CPUs with a 32-bit ``single-precision''
floating-point unit implement @code{float} in hardware, but emulate
@code{double} in software.  On such a machine, doing computations
using @code{double} values is much more expensive because of the
overhead required for software emulation.

It is easy to accidentally do computations with @code{double} because
floating-point literals are implicitly of type @code{double}.  For
example, in:
@smallexample
@group
float area(float radius)
@{
   return 3.14159 * radius * radius;
@}
@end group
@end smallexample
the compiler will perform the entire computation with @code{double}
because the floating-point literal is a @code{double}.

@item -Wformat
@opindex Wformat
@opindex Wno-format
@opindex ffreestanding
@opindex fno-builtin
Check calls to @code{printf} and @code{scanf}, etc., to make sure that
the arguments supplied have types appropriate to the format string
specified, and that the conversions specified in the format string make
sense.  This includes standard functions, and others specified by format
attributes (@pxref{Function Attributes}), in the @code{printf},
@code{scanf}, @code{strftime} and @code{strfmon} (an X/Open extension,
not in the C standard) families (or other target-specific families).
Which functions are checked without format attributes having been
specified depends on the standard version selected, and such checks of
functions without the attribute specified are disabled by
@option{-ffreestanding} or @option{-fno-builtin}.

The formats are checked against the format features supported by GNU
libc version 2.2.  These include all ISO C90 and C99 features, as well
as features from the Single Unix Specification and some BSD and GNU
extensions.  Other library implementations may not support all these
features; GCC does not support warning about features that go beyond a
particular library's limitations.  However, if @option{-pedantic} is used
with @option{-Wformat}, warnings will be given about format features not
in the selected standard version (but not for @code{strfmon} formats,
since those are not in any version of the C standard).  @xref{C Dialect
Options,,Options Controlling C Dialect}.

Since @option{-Wformat} also checks for null format arguments for
several functions, @option{-Wformat} also implies @option{-Wnonnull}.

@option{-Wformat} is included in @option{-Wall}.  For more control over some
aspects of format checking, the options @option{-Wformat-y2k},
@option{-Wno-format-extra-args}, @option{-Wno-format-zero-length},
@option{-Wformat-nonliteral}, @option{-Wformat-security}, and
@option{-Wformat=2} are available, but are not included in @option{-Wall}.

@item -Wformat-y2k
@opindex Wformat-y2k
@opindex Wno-format-y2k
If @option{-Wformat} is specified, also warn about @code{strftime}
formats which may yield only a two-digit year.

@item -Wno-format-contains-nul
@opindex Wno-format-contains-nul
@opindex Wformat-contains-nul
If @option{-Wformat} is specified, do not warn about format strings that
contain NUL bytes.

@item -Wno-format-extra-args
@opindex Wno-format-extra-args
@opindex Wformat-extra-args
If @option{-Wformat} is specified, do not warn about excess arguments to a
@code{printf} or @code{scanf} format function.  The C standard specifies
that such arguments are ignored.

Where the unused arguments lie between used arguments that are
specified with @samp{$} operand number specifications, normally
warnings are still given, since the implementation could not know what
type to pass to @code{va_arg} to skip the unused arguments.  However,
in the case of @code{scanf} formats, this option will suppress the
warning if the unused arguments are all pointers, since the Single
Unix Specification says that such unused arguments are allowed.

@item -Wno-format-zero-length
@opindex Wno-format-zero-length
@opindex Wformat-zero-length
If @option{-Wformat} is specified, do not warn about zero-length formats.
The C standard specifies that zero-length formats are allowed.

@item -Wformat-nonliteral
@opindex Wformat-nonliteral
@opindex Wno-format-nonliteral
If @option{-Wformat} is specified, also warn if the format string is not a
string literal and so cannot be checked, unless the format function
takes its format arguments as a @code{va_list}.

@item -Wformat-security
@opindex Wformat-security
@opindex Wno-format-security
If @option{-Wformat} is specified, also warn about uses of format
functions that represent possible security problems.  At present, this
warns about calls to @code{printf} and @code{scanf} functions where the
format string is not a string literal and there are no format arguments,
as in @code{printf (foo);}.  This may be a security hole if the format
string came from untrusted input and contains @samp{%n}.  (This is
currently a subset of what @option{-Wformat-nonliteral} warns about, but
in future warnings may be added to @option{-Wformat-security} that are not
included in @option{-Wformat-nonliteral}.)

@item -Wformat=2
@opindex Wformat=2
@opindex Wno-format=2
Enable @option{-Wformat} plus format checks not included in
@option{-Wformat}.  Currently equivalent to @samp{-Wformat
-Wformat-nonliteral -Wformat-security -Wformat-y2k}.

@item -Wnonnull
@opindex Wnonnull
@opindex Wno-nonnull
Warn about passing a null pointer for arguments marked as
requiring a non-null value by the @code{nonnull} function attribute.

@option{-Wnonnull} is included in @option{-Wall} and @option{-Wformat}.  It
can be disabled with the @option{-Wno-nonnull} option.

@item -Winit-self @r{(C, C++, Objective-C and Objective-C++ only)}
@opindex Winit-self
@opindex Wno-init-self
Warn about uninitialized variables which are initialized with themselves.
Note this option can only be used with the @option{-Wuninitialized} option.

For example, GCC will warn about @code{i} being uninitialized in the
following snippet only when @option{-Winit-self} has been specified:
@smallexample
@group
int f()
@{
  int i = i;
  return i;
@}
@end group
@end smallexample

@item -Wimplicit-int @r{(C and Objective-C only)}
@opindex Wimplicit-int
@opindex Wno-implicit-int
Warn when a declaration does not specify a type.
This warning is enabled by @option{-Wall}.

@item -Wimplicit-function-declaration @r{(C and Objective-C only)}
@opindex Wimplicit-function-declaration
@opindex Wno-implicit-function-declaration
Give a warning whenever a function is used before being declared. In
C99 mode (@option{-std=c99} or @option{-std=gnu99}), this warning is
enabled by default and it is made into an error by
@option{-pedantic-errors}. This warning is also enabled by
@option{-Wall}.

@item -Wimplicit @r{(C and Objective-C only)}
@opindex Wimplicit
@opindex Wno-implicit
Same as @option{-Wimplicit-int} and @option{-Wimplicit-function-declaration}.
This warning is enabled by @option{-Wall}.

@item -Wignored-qualifiers @r{(C and C++ only)}
@opindex Wignored-qualifiers
@opindex Wno-ignored-qualifiers
Warn if the return type of a function has a type qualifier
such as @code{const}.  For ISO C such a type qualifier has no effect,
since the value returned by a function is not an lvalue.
For C++, the warning is only emitted for scalar types or @code{void}.
ISO C prohibits qualified @code{void} return types on function
definitions, so such return types always receive a warning
even without this option.

This warning is also enabled by @option{-Wextra}.

@item -Wmain
@opindex Wmain
@opindex Wno-main
Warn if the type of @samp{main} is suspicious.  @samp{main} should be
a function with external linkage, returning int, taking either zero
arguments, two, or three arguments of appropriate types.  This warning
is enabled by default in C++ and is enabled by either @option{-Wall}
or @option{-pedantic}.

@item -Wmissing-braces
@opindex Wmissing-braces
@opindex Wno-missing-braces
Warn if an aggregate or union initializer is not fully bracketed.  In
the following example, the initializer for @samp{a} is not fully
bracketed, but that for @samp{b} is fully bracketed.

@smallexample
int a[2][2] = @{ 0, 1, 2, 3 @};
int b[2][2] = @{ @{ 0, 1 @}, @{ 2, 3 @} @};
@end smallexample

This warning is enabled by @option{-Wall}.

@item -Wmissing-include-dirs @r{(C, C++, Objective-C and Objective-C++ only)}
@opindex Wmissing-include-dirs
@opindex Wno-missing-include-dirs
Warn if a user-supplied include directory does not exist.

@item -Wparentheses
@opindex Wparentheses
@opindex Wno-parentheses
Warn if parentheses are omitted in certain contexts, such
as when there is an assignment in a context where a truth value
is expected, or when operators are nested whose precedence people
often get confused about.

Also warn if a comparison like @samp{x<=y<=z} appears; this is
equivalent to @samp{(x<=y ? 1 : 0) <= z}, which is a different
interpretation from that of ordinary mathematical notation.

Also warn about constructions where there may be confusion to which
@code{if} statement an @code{else} branch belongs.  Here is an example of
such a case:

@smallexample
@group
@{
  if (a)
    if (b)
      foo ();
  else
    bar ();
@}
@end group
@end smallexample

In C/C++, every @code{else} branch belongs to the innermost possible
@code{if} statement, which in this example is @code{if (b)}.  This is
often not what the programmer expected, as illustrated in the above
example by indentation the programmer chose.  When there is the
potential for this confusion, GCC will issue a warning when this flag
is specified.  To eliminate the warning, add explicit braces around
the innermost @code{if} statement so there is no way the @code{else}
could belong to the enclosing @code{if}.  The resulting code would
look like this:

@smallexample
@group
@{
  if (a)
    @{
      if (b)
        foo ();
      else
        bar ();
    @}
@}
@end group
@end smallexample

Also warn for dangerous uses of the
?: with omitted middle operand GNU extension. When the condition
in the ?: operator is a boolean expression the omitted value will
be always 1. Often the user expects it to be a value computed
inside the conditional expression instead.

This warning is enabled by @option{-Wall}.

@item -Wsequence-point
@opindex Wsequence-point
@opindex Wno-sequence-point
Warn about code that may have undefined semantics because of violations
of sequence point rules in the C and C++ standards.

The C and C++ standards defines the order in which expressions in a C/C++
program are evaluated in terms of @dfn{sequence points}, which represent
a partial ordering between the execution of parts of the program: those
executed before the sequence point, and those executed after it.  These
occur after the evaluation of a full expression (one which is not part
of a larger expression), after the evaluation of the first operand of a
@code{&&}, @code{||}, @code{? :} or @code{,} (comma) operator, before a
function is called (but after the evaluation of its arguments and the
expression denoting the called function), and in certain other places.
Other than as expressed by the sequence point rules, the order of
evaluation of subexpressions of an expression is not specified.  All
these rules describe only a partial order rather than a total order,
since, for example, if two functions are called within one expression
with no sequence point between them, the order in which the functions
are called is not specified.  However, the standards committee have
ruled that function calls do not overlap.

It is not specified when between sequence points modifications to the
values of objects take effect.  Programs whose behavior depends on this
have undefined behavior; the C and C++ standards specify that ``Between
the previous and next sequence point an object shall have its stored
value modified at most once by the evaluation of an expression.
Furthermore, the prior value shall be read only to determine the value
to be stored.''.  If a program breaks these rules, the results on any
particular implementation are entirely unpredictable.

Examples of code with undefined behavior are @code{a = a++;}, @code{a[n]
= b[n++]} and @code{a[i++] = i;}.  Some more complicated cases are not
diagnosed by this option, and it may give an occasional false positive
result, but in general it has been found fairly effective at detecting
this sort of problem in programs.

The standard is worded confusingly, therefore there is some debate
over the precise meaning of the sequence point rules in subtle cases.
Links to discussions of the problem, including proposed formal
definitions, may be found on the GCC readings page, at
@uref{http://gcc.gnu.org/@/readings.html}.

This warning is enabled by @option{-Wall} for C and C++.

@item -Wreturn-type
@opindex Wreturn-type
@opindex Wno-return-type
Warn whenever a function is defined with a return-type that defaults
to @code{int}.  Also warn about any @code{return} statement with no
return-value in a function whose return-type is not @code{void}
(falling off the end of the function body is considered returning
without a value), and about a @code{return} statement with an
expression in a function whose return-type is @code{void}.

For C++, a function without return type always produces a diagnostic
message, even when @option{-Wno-return-type} is specified.  The only
exceptions are @samp{main} and functions defined in system headers.

This warning is enabled by @option{-Wall}.

@item -Wswitch
@opindex Wswitch
@opindex Wno-switch
Warn whenever a @code{switch} statement has an index of enumerated type
and lacks a @code{case} for one or more of the named codes of that
enumeration.  (The presence of a @code{default} label prevents this
warning.)  @code{case} labels outside the enumeration range also
provoke warnings when this option is used (even if there is a
@code{default} label).
This warning is enabled by @option{-Wall}.

@item -Wswitch-default
@opindex Wswitch-default
@opindex Wno-switch-default
Warn whenever a @code{switch} statement does not have a @code{default}
case.

@item -Wswitch-enum
@opindex Wswitch-enum
@opindex Wno-switch-enum
Warn whenever a @code{switch} statement has an index of enumerated type
and lacks a @code{case} for one or more of the named codes of that
enumeration.  @code{case} labels outside the enumeration range also
provoke warnings when this option is used.  The only difference
between @option{-Wswitch} and this option is that this option gives a
warning about an omitted enumeration code even if there is a
@code{default} label.

@item -Wsync-nand @r{(C and C++ only)}
@opindex Wsync-nand
@opindex Wno-sync-nand
Warn when @code{__sync_fetch_and_nand} and @code{__sync_nand_and_fetch}
built-in functions are used.  These functions changed semantics in GCC 4.4.

@item -Wtrigraphs
@opindex Wtrigraphs
@opindex Wno-trigraphs
Warn if any trigraphs are encountered that might change the meaning of
the program (trigraphs within comments are not warned about).
This warning is enabled by @option{-Wall}.

@item -Wunused-but-set-parameter
@opindex Wunused-but-set-parameter
@opindex Wno-unused-but-set-parameter
Warn whenever a function parameter is assigned to, but otherwise unused
(aside from its declaration).

To suppress this warning use the @samp{unused} attribute
(@pxref{Variable Attributes}).

This warning is also enabled by @option{-Wunused} together with
@option{-Wextra}.

@item -Wunused-but-set-variable
@opindex Wunused-but-set-variable
@opindex Wno-unused-but-set-variable
Warn whenever a local variable is assigned to, but otherwise unused
(aside from its declaration).
This warning is enabled by @option{-Wall}.

To suppress this warning use the @samp{unused} attribute
(@pxref{Variable Attributes}).

This warning is also enabled by @option{-Wunused}, which is enabled
by @option{-Wall}.

@item -Wunused-function
@opindex Wunused-function
@opindex Wno-unused-function
Warn whenever a static function is declared but not defined or a
non-inline static function is unused.
This warning is enabled by @option{-Wall}.

@item -Wunused-label
@opindex Wunused-label
@opindex Wno-unused-label
Warn whenever a label is declared but not used.
This warning is enabled by @option{-Wall}.

To suppress this warning use the @samp{unused} attribute
(@pxref{Variable Attributes}).

@item -Wunused-local-typedefs @r{(C, Objective-C, C++ and Objective-C++ only)}
@opindex Wunused-local-typedefs
Warn when a typedef locally defined in a function is not used.

@item -Wunused-parameter
@opindex Wunused-parameter
@opindex Wno-unused-parameter
Warn whenever a function parameter is unused aside from its declaration.

To suppress this warning use the @samp{unused} attribute
(@pxref{Variable Attributes}).

@item -Wno-unused-result
@opindex Wunused-result
@opindex Wno-unused-result
Do not warn if a caller of a function marked with attribute
@code{warn_unused_result} (@pxref{Function Attributes}) does not use
its return value. The default is @option{-Wunused-result}.

@item -Wunused-variable
@opindex Wunused-variable
@opindex Wno-unused-variable
Warn whenever a local variable or non-constant static variable is unused
aside from its declaration.
This warning is enabled by @option{-Wall}.

To suppress this warning use the @samp{unused} attribute
(@pxref{Variable Attributes}).

@item -Wunused-value
@opindex Wunused-value
@opindex Wno-unused-value
Warn whenever a statement computes a result that is explicitly not
used. To suppress this warning cast the unused expression to
@samp{void}. This includes an expression-statement or the left-hand
side of a comma expression that contains no side effects. For example,
an expression such as @samp{x[i,j]} will cause a warning, while
@samp{x[(void)i,j]} will not.

This warning is enabled by @option{-Wall}.

@item -Wunused
@opindex Wunused
@opindex Wno-unused
All the above @option{-Wunused} options combined.

In order to get a warning about an unused function parameter, you must
either specify @samp{-Wextra -Wunused} (note that @samp{-Wall} implies
@samp{-Wunused}), or separately specify @option{-Wunused-parameter}.

@item -Wuninitialized
@opindex Wuninitialized
@opindex Wno-uninitialized
Warn if an automatic variable is used without first being initialized
or if a variable may be clobbered by a @code{setjmp} call. In C++,
warn if a non-static reference or non-static @samp{const} member
appears in a class without constructors.

If you want to warn about code which uses the uninitialized value of the
variable in its own initializer, use the @option{-Winit-self} option.

These warnings occur for individual uninitialized or clobbered
elements of structure, union or array variables as well as for
variables which are uninitialized or clobbered as a whole.  They do
not occur for variables or elements declared @code{volatile}.  Because
these warnings depend on optimization, the exact variables or elements
for which there are warnings will depend on the precise optimization
options and version of GCC used.

Note that there may be no warning about a variable that is used only
to compute a value that itself is never used, because such
computations may be deleted by data flow analysis before the warnings
are printed.

@item -Wmaybe-uninitialized
@opindex Wmaybe-uninitialized
@opindex Wno-maybe-uninitialized
For an automatic variable, if there exists a path from the function
entry to a use of the variable that is initialized, but there exist
some other paths the variable is not initialized, the compiler will
emit a warning if it can not prove the uninitialized paths do not
happen at runtime. These warnings are made optional because GCC is
not smart enough to see all the reasons why the code might be correct
despite appearing to have an error.  Here is one example of how
this can happen:

@smallexample
@group
@{
  int x;