1 /* Definitions of target machine for GNU compiler for Renesas / SuperH SH.
2 Copyright (C) 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
3 2003 Free Software Foundation, Inc.
4 Contributed by Steve Chamberlain (sac@cygnus.com).
5 Improved by Jim Wilson (wilson@cygnus.com).
7 This file is part of GNU CC.
9 GNU CC is free software; you can redistribute it and/or modify
10 it under the terms of the GNU General Public License as published by
11 the Free Software Foundation; either version 2, or (at your option)
14 GNU CC is distributed in the hope that it will be useful,
15 but WITHOUT ANY WARRANTY; without even the implied warranty of
16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 GNU General Public License for more details.
19 You should have received a copy of the GNU General Public License
20 along with GNU CC; see the file COPYING. If not, write to
21 the Free Software Foundation, 59 Temple Place - Suite 330,
22 Boston, MA 02111-1307, USA. */
27 #define TARGET_VERSION \
28 fputs (" (Hitachi SH)", stderr);
30 /* Unfortunately, insn-attrtab.c doesn't include insn-codes.h. We can't
31 include it here, because bconfig.h is also included by gencodes.c . */
32 /* ??? No longer true. */
33 extern int code_for_indirect_jump_scratch;
35 #define TARGET_CPU_CPP_BUILTINS() \
37 builtin_define ("__sh__"); \
38 builtin_assert ("cpu=sh"); \
39 builtin_assert ("machine=sh"); \
40 switch ((int) sh_cpu) \
43 builtin_define ("__sh1__"); \
46 builtin_define ("__sh2__"); \
48 case PROCESSOR_SH2E: \
49 builtin_define ("__SH2E__"); \
52 builtin_define ("__sh3__"); \
53 builtin_define ("__SH3__"); \
54 if (TARGET_HARD_SH4) \
55 builtin_define ("__SH4_NOFPU__"); \
57 case PROCESSOR_SH3E: \
58 builtin_define (TARGET_HARD_SH4 ? "__SH4_SINGLE_ONLY__" : "__SH3E__"); \
61 builtin_define (TARGET_FPU_SINGLE ? "__SH4_SINGLE__" : "__SH4__"); \
65 builtin_define_with_value ("__SH5__", \
66 TARGET_SHMEDIA64 ? "64" : "32", 0); \
67 builtin_define_with_value ("__SHMEDIA__", \
68 TARGET_SHMEDIA ? "1" : "0", 0); \
69 if (! TARGET_FPU_DOUBLE) \
70 builtin_define ("__SH4_NOFPU__"); \
74 builtin_define ("__HITACHI__"); \
75 builtin_define (TARGET_LITTLE_ENDIAN \
76 ? "__LITTLE_ENDIAN__" : "__BIG_ENDIAN__"); \
79 builtin_define ("__pic__"); \
80 builtin_define ("__PIC__"); \
84 /* We can not debug without a frame pointer. */
85 /* #define CAN_DEBUG_WITHOUT_FP */
87 #define CONDITIONAL_REGISTER_USAGE do \
90 for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno ++) \
91 if (! VALID_REGISTER_P (regno)) \
92 fixed_regs[regno] = call_used_regs[regno] = 1; \
93 /* R8 and R9 are call-clobbered on SH5, but not on earlier SH ABIs. */ \
95 call_used_regs[FIRST_GENERAL_REG + 8] \
96 = call_used_regs[FIRST_GENERAL_REG + 9] = 1; \
99 regno_reg_class[FIRST_GENERAL_REG] = GENERAL_REGS; \
100 CLEAR_HARD_REG_SET (reg_class_contents[FP0_REGS]); \
101 regno_reg_class[FIRST_FP_REG] = FP_REGS; \
104 fixed_regs[PIC_OFFSET_TABLE_REGNUM] = 1; \
105 /* Renesas saves and restores mac registers on call. */ \
106 if (TARGET_HITACHI && ! TARGET_NOMACSAVE) \
108 call_used_regs[MACH_REG] = 0; \
109 call_used_regs[MACL_REG] = 0; \
111 for (regno = FIRST_FP_REG + (TARGET_LITTLE_ENDIAN != 0); \
112 regno <= LAST_FP_REG; regno += 2) \
113 SET_HARD_REG_BIT (reg_class_contents[DF_HI_REGS], regno); \
114 if (TARGET_SHMEDIA) \
116 for (regno = FIRST_TARGET_REG; regno <= LAST_TARGET_REG; regno ++)\
117 if (! fixed_regs[regno] && call_used_regs[regno]) \
118 SET_HARD_REG_BIT (reg_class_contents[SIBCALL_REGS], regno); \
121 for (regno = FIRST_GENERAL_REG; regno <= LAST_GENERAL_REG; regno++) \
122 if (! fixed_regs[regno] && call_used_regs[regno]) \
123 SET_HARD_REG_BIT (reg_class_contents[SIBCALL_REGS], regno); \
126 /* ??? Need to write documentation for all SH options and add it to the
129 /* Run-time compilation parameters selecting different hardware subsets. */
131 extern int target_flags;
132 #define ISIZE_BIT (1<<1)
133 #define DALIGN_BIT (1<<6)
134 #define SH1_BIT (1<<8)
135 #define SH2_BIT (1<<9)
136 #define SH3_BIT (1<<10)
137 #define SH_E_BIT (1<<11)
138 #define HARD_SH4_BIT (1<<5)
139 #define FPU_SINGLE_BIT (1<<7)
140 #define SH4_BIT (1<<12)
141 #define FMOVD_BIT (1<<4)
142 #define SH5_BIT (1<<0)
143 #define SPACE_BIT (1<<13)
144 #define BIGTABLE_BIT (1<<14)
145 #define RELAX_BIT (1<<15)
146 #define USERMODE_BIT (1<<16)
147 #define HITACHI_BIT (1<<22)
148 #define NOMACSAVE_BIT (1<<23)
149 #define PREFERGOT_BIT (1<<24)
150 #define PADSTRUCT_BIT (1<<28)
151 #define LITTLE_ENDIAN_BIT (1<<29)
152 #define IEEE_BIT (1<<30)
153 #define SAVE_ALL_TR_BIT (1<<2)
155 /* Nonzero if this is an ELF target - compile time only */
158 /* Nonzero if we should dump out instruction size info. */
159 #define TARGET_DUMPISIZE (target_flags & ISIZE_BIT)
161 /* Nonzero to align doubles on 64 bit boundaries. */
162 #define TARGET_ALIGN_DOUBLE (target_flags & DALIGN_BIT)
164 /* Nonzero if we should generate code using type 1 insns. */
165 #define TARGET_SH1 (target_flags & SH1_BIT)
167 /* Nonzero if we should generate code using type 2 insns. */
168 #define TARGET_SH2 (target_flags & SH2_BIT)
170 /* Nonzero if we should generate code using type 2E insns. */
171 #define TARGET_SH2E ((target_flags & SH_E_BIT) && TARGET_SH2)
173 /* Nonzero if we should generate code using type 3 insns. */
174 #define TARGET_SH3 (target_flags & SH3_BIT)
176 /* Nonzero if we should generate code using type 3E insns. */
177 #define TARGET_SH3E ((target_flags & SH_E_BIT) && TARGET_SH3)
179 /* Nonzero if the cache line size is 32. */
180 #define TARGET_CACHE32 (target_flags & HARD_SH4_BIT || TARGET_SH5)
182 /* Nonzero if we schedule for a superscalar implementation. */
183 #define TARGET_SUPERSCALAR (target_flags & HARD_SH4_BIT)
185 /* Nonzero if the target has separate instruction and data caches. */
186 #define TARGET_HARVARD (target_flags & HARD_SH4_BIT)
188 /* Nonzero if compiling for SH4 hardware (to be used for insn costs etc.) */
189 #define TARGET_HARD_SH4 (target_flags & HARD_SH4_BIT)
191 /* Nonzero if the default precision of th FPU is single */
192 #define TARGET_FPU_SINGLE (target_flags & FPU_SINGLE_BIT)
194 /* Nonzero if a double-precision FPU is available. */
195 #define TARGET_FPU_DOUBLE (target_flags & SH4_BIT)
197 /* Nonzero if an FPU is available. */
198 #define TARGET_FPU_ANY (TARGET_SH2E || TARGET_FPU_DOUBLE)
200 /* Nonzero if we should generate code using type 4 insns. */
201 #define TARGET_SH4 ((target_flags & SH4_BIT) && (target_flags & SH1_BIT))
203 /* Nonzero if we should generate code for a SH5 CPU (either ISA). */
204 #define TARGET_SH5 (target_flags & SH5_BIT)
206 /* Nonzero if we should generate code using the SHcompact instruction
207 set and 32-bit ABI. */
208 #define TARGET_SHCOMPACT (TARGET_SH5 && TARGET_SH1)
210 /* Nonzero if we should generate code using the SHmedia instruction
212 #define TARGET_SHMEDIA (TARGET_SH5 && ! TARGET_SH1)
214 /* Nonzero if we should generate code using the SHmedia ISA and 32-bit
216 #define TARGET_SHMEDIA32 (TARGET_SH5 && ! TARGET_SH1 \
217 && (target_flags & SH_E_BIT))
219 /* Nonzero if we should generate code using the SHmedia ISA and 64-bit
221 #define TARGET_SHMEDIA64 (TARGET_SH5 && ! TARGET_SH1 \
222 && ! (target_flags & SH_E_BIT))
224 /* Nonzero if we should generate code using SHmedia FPU instructions. */
225 #define TARGET_SHMEDIA_FPU (TARGET_SHMEDIA && TARGET_FPU_DOUBLE)
226 /* Nonzero if we should generate fmovd. */
227 #define TARGET_FMOVD (target_flags & FMOVD_BIT)
229 /* Nonzero if we respect NANs. */
230 #define TARGET_IEEE (target_flags & IEEE_BIT)
232 /* Nonzero if we should generate smaller code rather than faster code. */
233 #define TARGET_SMALLCODE (target_flags & SPACE_BIT)
235 /* Nonzero to use long jump tables. */
236 #define TARGET_BIGTABLE (target_flags & BIGTABLE_BIT)
238 /* Nonzero to generate pseudo-ops needed by the assembler and linker
239 to do function call relaxing. */
240 #define TARGET_RELAX (target_flags & RELAX_BIT)
242 /* Nonzero if using Renesas's calling convention. */
243 #define TARGET_HITACHI (target_flags & HITACHI_BIT)
245 /* Nonzero if not saving macl/mach when using -mhitachi */
246 #define TARGET_NOMACSAVE (target_flags & NOMACSAVE_BIT)
248 /* Nonzero if padding structures to a multiple of 4 bytes. This is
249 incompatible with Renesas's compiler, and gives unusual structure layouts
250 which confuse programmers.
251 ??? This option is not useful, but is retained in case there are people
252 who are still relying on it. It may be deleted in the future. */
253 #define TARGET_PADSTRUCT (target_flags & PADSTRUCT_BIT)
255 /* Nonzero if generating code for a little endian SH. */
256 #define TARGET_LITTLE_ENDIAN (target_flags & LITTLE_ENDIAN_BIT)
258 /* Nonzero if we should do everything in userland. */
259 #define TARGET_USERMODE (target_flags & USERMODE_BIT)
261 /* Nonzero if we should prefer @GOT calls when generating PIC. */
262 #define TARGET_PREFERGOT (target_flags & PREFERGOT_BIT)
264 #define TARGET_SAVE_ALL_TARGET_REGS (target_flags & SAVE_ALL_TR_BIT)
266 #define SELECT_SH1 (SH1_BIT)
267 #define SELECT_SH2 (SH2_BIT | SELECT_SH1)
268 #define SELECT_SH2E (SH_E_BIT | SH2_BIT | SH1_BIT | FPU_SINGLE_BIT)
269 #define SELECT_SH3 (SH3_BIT | SELECT_SH2)
270 #define SELECT_SH3E (SH_E_BIT | FPU_SINGLE_BIT | SELECT_SH3)
271 #define SELECT_SH4_NOFPU (HARD_SH4_BIT | SELECT_SH3)
272 #define SELECT_SH4_SINGLE_ONLY (HARD_SH4_BIT | SELECT_SH3E)
273 #define SELECT_SH4 (SH4_BIT | SH_E_BIT | HARD_SH4_BIT | SELECT_SH3)
274 #define SELECT_SH4_SINGLE (FPU_SINGLE_BIT | SELECT_SH4)
275 #define SELECT_SH5_64 (SH5_BIT | SH4_BIT)
276 #define SELECT_SH5_64_NOFPU (SH5_BIT)
277 #define SELECT_SH5_32 (SH5_BIT | SH4_BIT | SH_E_BIT)
278 #define SELECT_SH5_32_NOFPU (SH5_BIT | SH_E_BIT)
279 #define SELECT_SH5_COMPACT (SH5_BIT | SH4_BIT | SELECT_SH3E)
280 #define SELECT_SH5_COMPACT_NOFPU (SH5_BIT | SELECT_SH3)
282 /* Reset all target-selection flags. */
283 #define TARGET_NONE -(SH1_BIT | SH2_BIT | SH3_BIT | SH_E_BIT | SH4_BIT \
284 | HARD_SH4_BIT | FPU_SINGLE_BIT | SH5_BIT)
286 #define TARGET_SWITCHES \
287 { {"1", TARGET_NONE, "" }, \
288 {"1", SELECT_SH1, "Generate SH1 code" }, \
289 {"2", TARGET_NONE, "" }, \
290 {"2", SELECT_SH2, "Generate SH2 code" }, \
291 {"2e", TARGET_NONE, "" }, \
292 {"2e", SELECT_SH2E, "Generate SH2e code" }, \
293 {"3", TARGET_NONE, "" }, \
294 {"3", SELECT_SH3, "Generate SH3 code" }, \
295 {"3e", TARGET_NONE, "" }, \
296 {"3e", SELECT_SH3E, "Generate SH3e code" }, \
297 {"4-single-only", TARGET_NONE, "" }, \
298 {"4-single-only", SELECT_SH4_SINGLE_ONLY, "Generate only single-precision SH4 code" }, \
299 {"4-single", TARGET_NONE, "" }, \
300 {"4-single", SELECT_SH4_SINGLE, "Generate default single-precision SH4 code" }, \
301 {"4-nofpu", TARGET_NONE, "" }, \
302 {"4-nofpu", SELECT_SH4_NOFPU, "Generate SH4 FPU-less code" }, \
303 {"4", TARGET_NONE, "" }, \
304 {"4", SELECT_SH4, "Generate SH4 code" }, \
305 {"5-64media", TARGET_NONE, "" }, \
306 {"5-64media", SELECT_SH5_64, "Generate 64-bit SHmedia code" }, \
307 {"5-64media-nofpu", TARGET_NONE, "" }, \
308 {"5-64media-nofpu", SELECT_SH5_64_NOFPU, "Generate 64-bit FPU-less SHmedia code" }, \
309 {"5-32media", TARGET_NONE, "" }, \
310 {"5-32media", SELECT_SH5_32, "Generate 32-bit SHmedia code" }, \
311 {"5-32media-nofpu", TARGET_NONE, "" }, \
312 {"5-32media-nofpu", SELECT_SH5_32_NOFPU, "Generate 32-bit FPU-less SHmedia code" }, \
313 {"5-compact", TARGET_NONE, "" }, \
314 {"5-compact", SELECT_SH5_COMPACT, "Generate SHcompact code" }, \
315 {"5-compact-nofpu", TARGET_NONE, "" }, \
316 {"5-compact-nofpu", SELECT_SH5_COMPACT_NOFPU, "Generate FPU-less SHcompact code" }, \
317 {"b", -LITTLE_ENDIAN_BIT, "Generate code in big endian mode" }, \
318 {"bigtable", BIGTABLE_BIT, "Generate 32-bit offsets in switch tables" }, \
319 {"dalign", DALIGN_BIT, "Aligns doubles at 64-bit boundaries" }, \
320 {"fmovd", FMOVD_BIT, "" }, \
321 {"hitachi", HITACHI_BIT, "Follow Renesas (formerly Hitachi) / SuperH calling conventions" }, \
322 {"nomacsave", NOMACSAVE_BIT, "Mark MAC register as call-clobbered" }, \
323 {"ieee", IEEE_BIT, "Increase the IEEE compliance for floating-point code" }, \
324 {"isize", ISIZE_BIT, "" }, \
325 {"l", LITTLE_ENDIAN_BIT, "Generate code in little endian mode" }, \
326 {"no-ieee", -IEEE_BIT, "" }, \
327 {"padstruct", PADSTRUCT_BIT, "" }, \
328 {"prefergot", PREFERGOT_BIT, "Emit function-calls using global offset table when generating PIC" }, \
329 {"relax", RELAX_BIT, "Shorten address references during linking" }, \
330 {"space", SPACE_BIT, "Deprecated. Use -Os instead" }, \
331 {"usermode", USERMODE_BIT, "Generate library function call to invalidate instruction cache entries after fixing trampoline" }, \
333 {"", TARGET_DEFAULT, "" } \
336 /* This are meant to be redefined in the host dependent files */
337 #define SUBTARGET_SWITCHES
339 /* This defaults us to big-endian. */
340 #ifndef TARGET_ENDIAN_DEFAULT
341 #define TARGET_ENDIAN_DEFAULT 0
344 #ifndef TARGET_CPU_DEFAULT
345 #define TARGET_CPU_DEFAULT SELECT_SH1
348 #define TARGET_DEFAULT (TARGET_CPU_DEFAULT|TARGET_ENDIAN_DEFAULT)
350 #define CPP_SPEC " %(subtarget_cpp_spec) "
352 #ifndef SUBTARGET_CPP_SPEC
353 #define SUBTARGET_CPP_SPEC ""
356 #ifndef SUBTARGET_EXTRA_SPECS
357 #define SUBTARGET_EXTRA_SPECS
360 #define EXTRA_SPECS \
361 { "subtarget_cpp_spec", SUBTARGET_CPP_SPEC }, \
362 { "link_emul_prefix", LINK_EMUL_PREFIX }, \
363 { "link_default_cpu_emul", LINK_DEFAULT_CPU_EMUL }, \
364 { "subtarget_link_emul_suffix", SUBTARGET_LINK_EMUL_SUFFIX }, \
365 { "subtarget_link_spec", SUBTARGET_LINK_SPEC }, \
366 { "subtarget_asm_endian_spec", SUBTARGET_ASM_ENDIAN_SPEC }, \
367 { "subtarget_asm_relax_spec", SUBTARGET_ASM_RELAX_SPEC }, \
368 { "subtarget_asm_isa_spec", SUBTARGET_ASM_ISA_SPEC }, \
369 SUBTARGET_EXTRA_SPECS
371 #if TARGET_CPU_DEFAULT & HARD_SH4_BIT
372 #define SUBTARGET_ASM_RELAX_SPEC "%{!m1:%{!m2:%{!m3*:%{!m5*:-isa=sh4}}}}"
374 #define SUBTARGET_ASM_RELAX_SPEC "%{m4*:-isa=sh4}"
377 #define SH_ASM_SPEC \
378 "%(subtarget_asm_endian_spec) %{mrelax:-relax %(subtarget_asm_relax_spec)}\
379 %(subtarget_asm_isa_spec)"
381 #define ASM_SPEC SH_ASM_SPEC
383 #ifndef SUBTARGET_ASM_ENDIAN_SPEC
384 #if TARGET_ENDIAN_DEFAULT == LITTLE_ENDIAN_BIT
385 #define SUBTARGET_ASM_ENDIAN_SPEC "%{mb:-big} %{!mb:-little}"
387 #define SUBTARGET_ASM_ENDIAN_SPEC "%{ml:-little} %{!ml:-big}"
391 #define SUBTARGET_ASM_ISA_SPEC ""
393 #define LINK_EMUL_PREFIX "sh%{ml:l}"
395 #if TARGET_CPU_DEFAULT & SH5_BIT
396 #if TARGET_CPU_DEFAULT & SH_E_BIT
397 #define LINK_DEFAULT_CPU_EMUL "32"
399 #define LINK_DEFAULT_CPU_EMUL "64"
400 #endif /* SH_E_BIT */
402 #define LINK_DEFAULT_CPU_EMUL ""
405 #define SUBTARGET_LINK_EMUL_SUFFIX ""
406 #define SUBTARGET_LINK_SPEC ""
408 /* svr4.h redefines LINK_SPEC inappropriately, so go via SH_LINK_SPEC,
409 so that we can undo the damage without code replication. */
410 #define LINK_SPEC SH_LINK_SPEC
412 #define SH_LINK_SPEC "\
413 -m %(link_emul_prefix)\
414 %{m5-compact*|m5-32media*:32}\
416 %{!m1:%{!m2:%{!m3*:%{!m4*:%{!m5*:%(link_default_cpu_emul)}}}}}\
417 %(subtarget_link_emul_suffix) \
418 %{mrelax:-relax} %(subtarget_link_spec)"
420 #define OPTIMIZATION_OPTIONS(LEVEL,SIZE) \
423 flag_omit_frame_pointer = -1; \
425 target_flags |= SPACE_BIT; \
426 if (TARGET_SHMEDIA && LEVEL > 1) \
428 flag_branch_target_load_optimize = 1; \
430 target_flags |= SAVE_ALL_TR_BIT; \
434 #define ASSEMBLER_DIALECT assembler_dialect
436 extern int assembler_dialect;
438 #define OVERRIDE_OPTIONS \
443 assembler_dialect = 0; \
454 assembler_dialect = 1; \
460 target_flags |= DALIGN_BIT; \
462 && ! (TARGET_SHCOMPACT && TARGET_LITTLE_ENDIAN)) \
463 target_flags |= FMOVD_BIT; \
464 if (TARGET_SHMEDIA) \
466 /* There are no delay slots on SHmedia. */ \
467 flag_delayed_branch = 0; \
468 /* Relaxation isn't yet supported for SHmedia */ \
469 target_flags &= ~RELAX_BIT; \
471 /* -fprofile-arcs needs a working libgcov . In unified tree \
472 configurations with newlib, this requires to configure with \
473 --with-newlib --with-headers. But there is no way to check \
474 here we have a working libgcov, so just assume that we have. */\
477 warning ("Profiling is not supported on this target."); \
478 profile_flag = profile_arc_flag = 0; \
483 /* Only the sh64-elf assembler fully supports .quad properly. */\
484 targetm.asm_out.aligned_op.di = NULL; \
485 targetm.asm_out.unaligned_op.di = NULL; \
488 reg_class_from_letter['e' - 'a'] = NO_REGS; \
490 for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++) \
491 if (! VALID_REGISTER_P (regno)) \
492 sh_register_names[regno][0] = '\0'; \
494 for (regno = 0; regno < ADDREGNAMES_SIZE; regno++) \
495 if (! VALID_REGISTER_P (ADDREGNAMES_REGNO (regno))) \
496 sh_additional_register_names[regno][0] = '\0'; \
498 if (flag_omit_frame_pointer < 0) \
500 /* The debugging information is sufficient, \
501 but gdb doesn't implement this yet */ \
503 flag_omit_frame_pointer \
504 = (PREFERRED_DEBUGGING_TYPE == DWARF_DEBUG \
505 || PREFERRED_DEBUGGING_TYPE == DWARF2_DEBUG); \
507 flag_omit_frame_pointer = 0; \
510 if (flag_pic && ! TARGET_PREFERGOT) \
511 flag_no_function_cse = 1; \
513 if (SMALL_REGISTER_CLASSES) \
515 /* Never run scheduling before reload, since that can \
516 break global alloc, and generates slower code anyway due \
517 to the pressure on R0. */ \
518 flag_schedule_insns = 0; \
521 if (align_loops == 0) \
522 align_loops = 1 << (TARGET_SH5 ? 3 : 2); \
523 if (align_jumps == 0) \
524 align_jumps = 1 << CACHE_LOG; \
525 else if (align_jumps < (TARGET_SHMEDIA ? 4 : 2)) \
526 align_jumps = TARGET_SHMEDIA ? 4 : 2; \
528 /* Allocation boundary (in *bytes*) for the code of a function. \
529 SH1: 32 bit alignment is faster, because instructions are always \
530 fetched as a pair from a longword boundary. \
531 SH2 .. SH5 : align to cache line start. */ \
532 if (align_functions == 0) \
534 = TARGET_SMALLCODE ? FUNCTION_BOUNDARY/8 : (1 << CACHE_LOG); \
535 /* The linker relaxation code breaks when a function contains \
536 alignments that are larger than that at the start of a \
537 compilation unit. */ \
541 = align_loops > align_jumps ? align_loops : align_jumps; \
543 /* Also take possible .long constants / mova tables int account. */\
546 if (align_functions < min_align) \
547 align_functions = min_align; \
551 /* Target machine storage layout. */
553 /* Define this if most significant bit is lowest numbered
554 in instructions that operate on numbered bit-fields. */
556 #define BITS_BIG_ENDIAN 0
558 /* Define this if most significant byte of a word is the lowest numbered. */
559 #define BYTES_BIG_ENDIAN (TARGET_LITTLE_ENDIAN == 0)
561 /* Define this if most significant word of a multiword number is the lowest
563 #define WORDS_BIG_ENDIAN (TARGET_LITTLE_ENDIAN == 0)
565 /* Define this to set the endianness to use in libgcc2.c, which can
566 not depend on target_flags. */
567 #if defined(__LITTLE_ENDIAN__)
568 #define LIBGCC2_WORDS_BIG_ENDIAN 0
570 #define LIBGCC2_WORDS_BIG_ENDIAN 1
573 #define MAX_BITS_PER_WORD 64
575 #define MAX_LONG_TYPE_SIZE MAX_BITS_PER_WORD
577 /* Width in bits of an `int'. We want just 32-bits, even if words are
579 #define INT_TYPE_SIZE 32
581 /* Width in bits of a `long'. */
582 #define LONG_TYPE_SIZE (TARGET_SHMEDIA64 ? 64 : 32)
584 /* Width in bits of a `long long'. */
585 #define LONG_LONG_TYPE_SIZE 64
587 /* Width in bits of a `long double'. */
588 #define LONG_DOUBLE_TYPE_SIZE 64
590 /* Width of a word, in units (bytes). */
591 #define UNITS_PER_WORD (TARGET_SHMEDIA ? 8 : 4)
592 #define MIN_UNITS_PER_WORD 4
594 /* Width in bits of a pointer.
595 See also the macro `Pmode' defined below. */
596 #define POINTER_SIZE (TARGET_SHMEDIA64 ? 64 : 32)
598 /* Allocation boundary (in *bits*) for storing arguments in argument list. */
599 #define PARM_BOUNDARY (TARGET_SH5 ? 64 : 32)
601 /* Boundary (in *bits*) on which stack pointer should be aligned. */
602 #define STACK_BOUNDARY BIGGEST_ALIGNMENT
604 /* The log (base 2) of the cache line size, in bytes. Processors prior to
605 SH2 have no actual cache, but they fetch code in chunks of 4 bytes.
606 The SH2/3 have 16 byte cache lines, and the SH4 has a 32 byte cache line */
607 #define CACHE_LOG (TARGET_CACHE32 ? 5 : TARGET_SH2 ? 4 : 2)
609 /* ABI given & required minimum allocation boundary (in *bits*) for the
610 code of a function. */
611 #define FUNCTION_BOUNDARY (16 << TARGET_SHMEDIA)
613 /* On SH5, the lowest bit is used to indicate SHmedia functions, so
614 the vbit must go into the delta field of
615 pointers-to-member-functions. */
616 #define TARGET_PTRMEMFUNC_VBIT_LOCATION \
617 (TARGET_SH5 ? ptrmemfunc_vbit_in_delta : ptrmemfunc_vbit_in_pfn)
619 /* Alignment of field after `int : 0' in a structure. */
620 #define EMPTY_FIELD_BOUNDARY 32
622 /* No data type wants to be aligned rounder than this. */
623 #define BIGGEST_ALIGNMENT (TARGET_ALIGN_DOUBLE ? 64 : 32)
625 /* The best alignment to use in cases where we have a choice. */
626 #define FASTEST_ALIGNMENT (TARGET_SH5 ? 64 : 32)
628 /* Make strings word-aligned so strcpy from constants will be faster. */
629 #define CONSTANT_ALIGNMENT(EXP, ALIGN) \
630 ((TREE_CODE (EXP) == STRING_CST \
631 && (ALIGN) < FASTEST_ALIGNMENT) \
632 ? FASTEST_ALIGNMENT : (ALIGN))
634 /* get_mode_alignment assumes complex values are always held in multiple
635 registers, but that is not the case on the SH; CQImode and CHImode are
636 held in a single integer register. SH5 also holds CSImode and SCmode
637 values in integer regsters. This is relevant for argument passing on
638 SHcompact as we use a stack temp in order to pass CSImode by reference. */
639 #define LOCAL_ALIGNMENT(TYPE, ALIGN) \
640 ((GET_MODE_CLASS (TYPE_MODE (TYPE)) == MODE_COMPLEX_INT \
641 || GET_MODE_CLASS (TYPE_MODE (TYPE)) == MODE_COMPLEX_FLOAT) \
642 ? MIN (BIGGEST_ALIGNMENT, GET_MODE_BITSIZE (TYPE_MODE (TYPE))) \
645 /* Make arrays of chars word-aligned for the same reasons. */
646 #define DATA_ALIGNMENT(TYPE, ALIGN) \
647 (TREE_CODE (TYPE) == ARRAY_TYPE \
648 && TYPE_MODE (TREE_TYPE (TYPE)) == QImode \
649 && (ALIGN) < FASTEST_ALIGNMENT ? FASTEST_ALIGNMENT : (ALIGN))
651 /* Number of bits which any structure or union's size must be a
652 multiple of. Each structure or union's size is rounded up to a
654 #define STRUCTURE_SIZE_BOUNDARY (TARGET_PADSTRUCT ? 32 : 8)
656 /* Set this nonzero if move instructions will actually fail to work
657 when given unaligned data. */
658 #define STRICT_ALIGNMENT 1
660 /* If LABEL_AFTER_BARRIER demands an alignment, return its base 2 logarithm. */
661 #define LABEL_ALIGN_AFTER_BARRIER(LABEL_AFTER_BARRIER) \
662 barrier_align (LABEL_AFTER_BARRIER)
664 #define LOOP_ALIGN(A_LABEL) \
665 ((! optimize || TARGET_HARVARD || TARGET_SMALLCODE) \
666 ? 0 : sh_loop_align (A_LABEL))
668 #define LABEL_ALIGN(A_LABEL) \
670 (PREV_INSN (A_LABEL) \
671 && GET_CODE (PREV_INSN (A_LABEL)) == INSN \
672 && GET_CODE (PATTERN (PREV_INSN (A_LABEL))) == UNSPEC_VOLATILE \
673 && XINT (PATTERN (PREV_INSN (A_LABEL)), 1) == UNSPECV_ALIGN) \
674 /* explicit alignment insn in constant tables. */ \
675 ? INTVAL (XVECEXP (PATTERN (PREV_INSN (A_LABEL)), 0, 0)) \
678 /* Jump tables must be 32 bit aligned, no matter the size of the element. */
679 #define ADDR_VEC_ALIGN(ADDR_VEC) 2
681 /* The base two logarithm of the known minimum alignment of an insn length. */
682 #define INSN_LENGTH_ALIGNMENT(A_INSN) \
683 (GET_CODE (A_INSN) == INSN \
684 ? 1 << TARGET_SHMEDIA \
685 : GET_CODE (A_INSN) == JUMP_INSN || GET_CODE (A_INSN) == CALL_INSN \
686 ? 1 << TARGET_SHMEDIA \
689 /* Standard register usage. */
691 /* Register allocation for the Renesas calling convention:
697 r14 frame pointer/call saved
699 ap arg pointer (doesn't really exist, always eliminated)
700 pr subroutine return address
702 mach multiply/accumulate result, high part
703 macl multiply/accumulate result, low part.
704 fpul fp/int communication register
705 rap return address pointer register
707 fr1..fr3 scratch floating point registers
709 fr12..fr15 call saved floating point registers */
711 #define MAX_REGISTER_NAME_LENGTH 5
712 extern char sh_register_names[][MAX_REGISTER_NAME_LENGTH + 1];
714 #define SH_REGISTER_NAMES_INITIALIZER \
716 "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \
717 "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", \
718 "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23", \
719 "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31", \
720 "r32", "r33", "r34", "r35", "r36", "r37", "r38", "r39", \
721 "r40", "r41", "r42", "r43", "r44", "r45", "r46", "r47", \
722 "r48", "r49", "r50", "r51", "r52", "r53", "r54", "r55", \
723 "r56", "r57", "r58", "r59", "r60", "r61", "r62", "r63", \
724 "fr0", "fr1", "fr2", "fr3", "fr4", "fr5", "fr6", "fr7", \
725 "fr8", "fr9", "fr10", "fr11", "fr12", "fr13", "fr14", "fr15", \
726 "fr16", "fr17", "fr18", "fr19", "fr20", "fr21", "fr22", "fr23", \
727 "fr24", "fr25", "fr26", "fr27", "fr28", "fr29", "fr30", "fr31", \
728 "fr32", "fr33", "fr34", "fr35", "fr36", "fr37", "fr38", "fr39", \
729 "fr40", "fr41", "fr42", "fr43", "fr44", "fr45", "fr46", "fr47", \
730 "fr48", "fr49", "fr50", "fr51", "fr52", "fr53", "fr54", "fr55", \
731 "fr56", "fr57", "fr58", "fr59", "fr60", "fr61", "fr62", "fr63", \
732 "tr0", "tr1", "tr2", "tr3", "tr4", "tr5", "tr6", "tr7", \
733 "xd0", "xd2", "xd4", "xd6", "xd8", "xd10", "xd12", "xd14", \
734 "gbr", "ap", "pr", "t", "mach", "macl", "fpul", "fpscr", \
738 #define DEBUG_REGISTER_NAMES SH_REGISTER_NAMES_INITIALIZER
740 #define REGNAMES_ARR_INDEX_1(index) \
741 (sh_register_names[index])
742 #define REGNAMES_ARR_INDEX_2(index) \
743 REGNAMES_ARR_INDEX_1 ((index)), REGNAMES_ARR_INDEX_1 ((index)+1)
744 #define REGNAMES_ARR_INDEX_4(index) \
745 REGNAMES_ARR_INDEX_2 ((index)), REGNAMES_ARR_INDEX_2 ((index)+2)
746 #define REGNAMES_ARR_INDEX_8(index) \
747 REGNAMES_ARR_INDEX_4 ((index)), REGNAMES_ARR_INDEX_4 ((index)+4)
748 #define REGNAMES_ARR_INDEX_16(index) \
749 REGNAMES_ARR_INDEX_8 ((index)), REGNAMES_ARR_INDEX_8 ((index)+8)
750 #define REGNAMES_ARR_INDEX_32(index) \
751 REGNAMES_ARR_INDEX_16 ((index)), REGNAMES_ARR_INDEX_16 ((index)+16)
752 #define REGNAMES_ARR_INDEX_64(index) \
753 REGNAMES_ARR_INDEX_32 ((index)), REGNAMES_ARR_INDEX_32 ((index)+32)
755 #define REGISTER_NAMES \
757 REGNAMES_ARR_INDEX_64 (0), \
758 REGNAMES_ARR_INDEX_64 (64), \
759 REGNAMES_ARR_INDEX_8 (128), \
760 REGNAMES_ARR_INDEX_8 (136), \
761 REGNAMES_ARR_INDEX_8 (144), \
762 REGNAMES_ARR_INDEX_1 (152) \
765 #define ADDREGNAMES_SIZE 32
766 #define MAX_ADDITIONAL_REGISTER_NAME_LENGTH 4
767 extern char sh_additional_register_names[ADDREGNAMES_SIZE] \
768 [MAX_ADDITIONAL_REGISTER_NAME_LENGTH + 1];
770 #define SH_ADDITIONAL_REGISTER_NAMES_INITIALIZER \
772 "dr0", "dr2", "dr4", "dr6", "dr8", "dr10", "dr12", "dr14", \
773 "dr16", "dr18", "dr20", "dr22", "dr24", "dr26", "dr28", "dr30", \
774 "dr32", "dr34", "dr36", "dr38", "dr40", "dr42", "dr44", "dr46", \
775 "dr48", "dr50", "dr52", "dr54", "dr56", "dr58", "dr60", "dr62" \
778 #define ADDREGNAMES_REGNO(index) \
779 ((index < 32) ? (FIRST_FP_REG + (index) * 2) \
782 #define ADDREGNAMES_ARR_INDEX_1(index) \
783 { (sh_additional_register_names[index]), ADDREGNAMES_REGNO (index) }
784 #define ADDREGNAMES_ARR_INDEX_2(index) \
785 ADDREGNAMES_ARR_INDEX_1 ((index)), ADDREGNAMES_ARR_INDEX_1 ((index)+1)
786 #define ADDREGNAMES_ARR_INDEX_4(index) \
787 ADDREGNAMES_ARR_INDEX_2 ((index)), ADDREGNAMES_ARR_INDEX_2 ((index)+2)
788 #define ADDREGNAMES_ARR_INDEX_8(index) \
789 ADDREGNAMES_ARR_INDEX_4 ((index)), ADDREGNAMES_ARR_INDEX_4 ((index)+4)
790 #define ADDREGNAMES_ARR_INDEX_16(index) \
791 ADDREGNAMES_ARR_INDEX_8 ((index)), ADDREGNAMES_ARR_INDEX_8 ((index)+8)
792 #define ADDREGNAMES_ARR_INDEX_32(index) \
793 ADDREGNAMES_ARR_INDEX_16 ((index)), ADDREGNAMES_ARR_INDEX_16 ((index)+16)
795 #define ADDITIONAL_REGISTER_NAMES \
797 ADDREGNAMES_ARR_INDEX_32 (0) \
800 /* Number of actual hardware registers.
801 The hardware registers are assigned numbers for the compiler
802 from 0 to just below FIRST_PSEUDO_REGISTER.
803 All registers that the compiler knows about must be given numbers,
804 even those that are not normally considered general registers. */
806 /* There are many other relevant definitions in sh.md's md_constants. */
808 #define FIRST_GENERAL_REG R0_REG
809 #define LAST_GENERAL_REG (FIRST_GENERAL_REG + (TARGET_SHMEDIA ? 63 : 15))
810 #define FIRST_FP_REG DR0_REG
811 #define LAST_FP_REG (FIRST_FP_REG + \
812 (TARGET_SHMEDIA_FPU ? 63 : TARGET_SH2E ? 15 : -1))
813 #define FIRST_XD_REG XD0_REG
814 #define LAST_XD_REG (FIRST_XD_REG + ((TARGET_SH4 && TARGET_FMOVD) ? 7 : -1))
815 #define FIRST_TARGET_REG TR0_REG
816 #define LAST_TARGET_REG (FIRST_TARGET_REG + (TARGET_SHMEDIA ? 7 : -1))
818 #define GENERAL_REGISTER_P(REGNO) \
819 IN_RANGE ((REGNO), FIRST_GENERAL_REG, LAST_GENERAL_REG)
821 #define GENERAL_OR_AP_REGISTER_P(REGNO) \
822 (GENERAL_REGISTER_P (REGNO) || ((REGNO) == AP_REG))
824 #define FP_REGISTER_P(REGNO) \
825 ((REGNO) >= FIRST_FP_REG && (REGNO) <= LAST_FP_REG)
827 #define XD_REGISTER_P(REGNO) \
828 ((REGNO) >= FIRST_XD_REG && (REGNO) <= LAST_XD_REG)
830 #define FP_OR_XD_REGISTER_P(REGNO) \
831 (FP_REGISTER_P (REGNO) || XD_REGISTER_P (REGNO))
833 #define FP_ANY_REGISTER_P(REGNO) \
834 (FP_REGISTER_P (REGNO) || XD_REGISTER_P (REGNO) || (REGNO) == FPUL_REG)
836 #define SPECIAL_REGISTER_P(REGNO) \
837 ((REGNO) == GBR_REG || (REGNO) == T_REG \
838 || (REGNO) == MACH_REG || (REGNO) == MACL_REG)
840 #define TARGET_REGISTER_P(REGNO) \
841 ((REGNO) >= FIRST_TARGET_REG && (REGNO) <= LAST_TARGET_REG)
843 #define SHMEDIA_REGISTER_P(REGNO) \
844 (GENERAL_REGISTER_P (REGNO) || FP_REGISTER_P (REGNO) \
845 || TARGET_REGISTER_P (REGNO))
847 /* This is to be used in CONDITIONAL_REGISTER_USAGE, to mark registers
848 that should be fixed. */
849 #define VALID_REGISTER_P(REGNO) \
850 (SHMEDIA_REGISTER_P (REGNO) || XD_REGISTER_P (REGNO) \
851 || (REGNO) == AP_REG || (REGNO) == RAP_REG \
852 || (TARGET_SH1 && (SPECIAL_REGISTER_P (REGNO) || (REGNO) == PR_REG)) \
853 || (TARGET_SH2E && (REGNO) == FPUL_REG))
855 /* The mode that should be generally used to store a register by
856 itself in the stack, or to load it back. */
857 #define REGISTER_NATURAL_MODE(REGNO) \
858 (FP_REGISTER_P (REGNO) ? SFmode \
859 : XD_REGISTER_P (REGNO) ? DFmode \
860 : TARGET_SHMEDIA && ! HARD_REGNO_CALL_PART_CLOBBERED ((REGNO), DImode) \
864 #define FIRST_PSEUDO_REGISTER 153
866 /* 1 for registers that have pervasive standard uses
867 and are not available for the register allocator.
869 Mach register is fixed 'cause it's only 10 bits wide for SH1.
870 It is 32 bits wide for SH2. */
872 #define FIXED_REGISTERS \
874 /* Regular registers. */ \
875 0, 0, 0, 0, 0, 0, 0, 0, \
876 0, 0, 0, 0, 0, 0, 0, 1, \
877 /* r16 is reserved, r18 is the former pr. */ \
878 1, 0, 0, 0, 0, 0, 0, 0, \
879 /* r24 is reserved for the OS; r25, for the assembler or linker. */ \
880 /* r26 is a global variable data pointer; r27 is for constants. */ \
881 1, 1, 1, 1, 0, 0, 0, 0, \
882 0, 0, 0, 0, 0, 0, 0, 0, \
883 0, 0, 0, 0, 0, 0, 0, 0, \
884 0, 0, 0, 0, 0, 0, 0, 0, \
885 0, 0, 0, 0, 0, 0, 0, 1, \
886 /* FP registers. */ \
887 0, 0, 0, 0, 0, 0, 0, 0, \
888 0, 0, 0, 0, 0, 0, 0, 0, \
889 0, 0, 0, 0, 0, 0, 0, 0, \
890 0, 0, 0, 0, 0, 0, 0, 0, \
891 0, 0, 0, 0, 0, 0, 0, 0, \
892 0, 0, 0, 0, 0, 0, 0, 0, \
893 0, 0, 0, 0, 0, 0, 0, 0, \
894 0, 0, 0, 0, 0, 0, 0, 0, \
895 /* Branch target registers. */ \
896 0, 0, 0, 0, 0, 0, 0, 0, \
897 /* XD registers. */ \
898 0, 0, 0, 0, 0, 0, 0, 0, \
899 /*"gbr", "ap", "pr", "t", "mach", "macl", "fpul", "fpscr", */ \
900 1, 1, 1, 1, 1, 1, 0, 1, \
905 /* 1 for registers not available across function calls.
906 These must include the FIXED_REGISTERS and also any
907 registers that can be used without being saved.
908 The latter must include the registers where values are returned
909 and the register where structure-value addresses are passed.
910 Aside from that, you can include as many other registers as you like. */
912 #define CALL_USED_REGISTERS \
914 /* Regular registers. */ \
915 1, 1, 1, 1, 1, 1, 1, 1, \
916 /* R8 and R9 are call-clobbered on SH5, but not on earlier SH ABIs. \
917 Only the lower 32bits of R10-R14 are guaranteed to be preserved \
918 across SH5 function calls. */ \
919 0, 0, 0, 0, 0, 0, 0, 1, \
920 1, 1, 0, 1, 1, 1, 1, 1, \
921 1, 1, 1, 1, 0, 0, 0, 0, \
922 0, 0, 0, 0, 1, 1, 1, 1, \
923 1, 1, 1, 1, 0, 0, 0, 0, \
924 0, 0, 0, 0, 0, 0, 0, 0, \
925 0, 0, 0, 0, 1, 1, 1, 1, \
926 /* FP registers. */ \
927 1, 1, 1, 1, 1, 1, 1, 1, \
928 1, 1, 1, 1, 0, 0, 0, 0, \
929 1, 1, 1, 1, 1, 1, 1, 1, \
930 1, 1, 1, 1, 1, 1, 1, 1, \
931 1, 1, 1, 1, 0, 0, 0, 0, \
932 0, 0, 0, 0, 0, 0, 0, 0, \
933 0, 0, 0, 0, 0, 0, 0, 0, \
934 0, 0, 0, 0, 0, 0, 0, 0, \
935 /* Branch target registers. */ \
936 1, 1, 1, 1, 1, 0, 0, 0, \
937 /* XD registers. */ \
938 1, 1, 1, 1, 1, 1, 0, 0, \
939 /*"gbr", "ap", "pr", "t", "mach", "macl", "fpul", "fpscr", */ \
940 1, 1, 0, 1, 1, 1, 1, 1, \
945 /* Only the lower 32-bits of R10-R14 are guaranteed to be preserved
946 across SHcompact function calls. We can't tell whether a called
947 function is SHmedia or SHcompact, so we assume it may be when
948 compiling SHmedia code with the 32-bit ABI, since that's the only
949 ABI that can be linked with SHcompact code. */
950 #define HARD_REGNO_CALL_PART_CLOBBERED(REGNO,MODE) \
952 && GET_MODE_SIZE (MODE) > 4 \
953 && (((REGNO) >= FIRST_GENERAL_REG + 10 \
954 && (REGNO) <= FIRST_GENERAL_REG + 14) \
955 || (REGNO) == PR_MEDIA_REG))
957 /* Return number of consecutive hard regs needed starting at reg REGNO
958 to hold something of mode MODE.
959 This is ordinarily the length in words of a value of mode MODE
960 but can be less for certain modes in special long registers.
962 On the SH all but the XD regs are UNITS_PER_WORD bits wide. */
964 #define HARD_REGNO_NREGS(REGNO, MODE) \
965 (XD_REGISTER_P (REGNO) \
966 ? ((GET_MODE_SIZE (MODE) + (2*UNITS_PER_WORD - 1)) / (2*UNITS_PER_WORD)) \
967 : (TARGET_SHMEDIA && FP_REGISTER_P (REGNO)) \
968 ? ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD/2 - 1) / (UNITS_PER_WORD/2)) \
969 : ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD))
971 /* Value is 1 if hard register REGNO can hold a value of machine-mode MODE.
972 We can allow any mode in any general register. The special registers
973 only allow SImode. Don't allow any mode in the PR. */
975 /* We cannot hold DCmode values in the XD registers because alter_reg
976 handles subregs of them incorrectly. We could work around this by
977 spacing the XD registers like the DR registers, but this would require
978 additional memory in every compilation to hold larger register vectors.
979 We could hold SFmode / SCmode values in XD registers, but that
980 would require a tertiary reload when reloading from / to memory,
981 and a secondary reload to reload from / to general regs; that
982 seems to be a loosing proposition. */
983 /* We want to allow TImode FP regs so that when V4SFmode is loaded as TImode,
984 it won't be ferried through GP registers first. */
985 #define HARD_REGNO_MODE_OK(REGNO, MODE) \
986 (SPECIAL_REGISTER_P (REGNO) ? (MODE) == SImode \
987 : (REGNO) == FPUL_REG ? (MODE) == SImode || (MODE) == SFmode \
988 : FP_REGISTER_P (REGNO) && (MODE) == SFmode \
990 : (MODE) == V2SFmode \
991 ? ((FP_REGISTER_P (REGNO) && ((REGNO) - FIRST_FP_REG) % 2 == 0) \
992 || GENERAL_REGISTER_P (REGNO)) \
993 : (MODE) == V4SFmode \
994 ? ((FP_REGISTER_P (REGNO) && ((REGNO) - FIRST_FP_REG) % 4 == 0) \
995 || (! TARGET_SHMEDIA && GENERAL_REGISTER_P (REGNO))) \
996 : (MODE) == V16SFmode \
998 ? (FP_REGISTER_P (REGNO) && ((REGNO) - FIRST_FP_REG) % 16 == 0) \
999 : (REGNO) == FIRST_XD_REG) \
1000 : FP_REGISTER_P (REGNO) \
1001 ? ((MODE) == SFmode || (MODE) == SImode \
1002 || ((TARGET_SH2E || TARGET_SHMEDIA) && (MODE) == SCmode) \
1003 || (((TARGET_SH4 && (MODE) == DFmode) || (MODE) == DCmode \
1004 || (TARGET_SHMEDIA && ((MODE) == DFmode || (MODE) == DImode \
1005 || (MODE) == V2SFmode || (MODE) == TImode))) \
1006 && (((REGNO) - FIRST_FP_REG) & 1) == 0)) \
1007 : XD_REGISTER_P (REGNO) \
1008 ? (MODE) == DFmode \
1009 : TARGET_REGISTER_P (REGNO) \
1010 ? ((MODE) == DImode || (MODE) == SImode) \
1011 : (REGNO) == PR_REG ? 0 \
1012 : (REGNO) == FPSCR_REG ? (MODE) == PSImode \
1015 /* Value is 1 if MODE is a supported vector mode. */
1016 #define VECTOR_MODE_SUPPORTED_P(MODE) \
1018 && ((MODE) == V2SFmode || (MODE) == V4SFmode || (MODE) == V16SFmode)) \
1019 || (TARGET_SHMEDIA \
1020 && ((MODE) == V8QImode || (MODE) == V2HImode || (MODE) == V4HImode \
1021 || (MODE) == V2SImode)))
1023 /* Value is 1 if it is a good idea to tie two pseudo registers
1024 when one has mode MODE1 and one has mode MODE2.
1025 If HARD_REGNO_MODE_OK could produce different values for MODE1 and MODE2,
1026 for any hard reg, then this must be 0 for correct output.
1027 That's the case for xd registers: we don't hold SFmode values in
1028 them, so we can't tie an SFmode pseudos with one in another
1029 floating-point mode. */
1031 #define MODES_TIEABLE_P(MODE1, MODE2) \
1032 ((MODE1) == (MODE2) \
1033 || (GET_MODE_CLASS (MODE1) == GET_MODE_CLASS (MODE2) \
1034 && (TARGET_SHMEDIA ? ((GET_MODE_SIZE (MODE1) <= 4) \
1035 && (GET_MODE_SIZE (MODE2) <= 4)) \
1036 : ((MODE1) != SFmode && (MODE2) != SFmode))))
1038 /* A C expression that is nonzero if hard register NEW_REG can be
1039 considered for use as a rename register for OLD_REG register */
1041 #define HARD_REGNO_RENAME_OK(OLD_REG, NEW_REG) \
1042 sh_hard_regno_rename_ok (OLD_REG, NEW_REG)
1044 /* Specify the registers used for certain standard purposes.
1045 The values of these macros are register numbers. */
1047 /* Define this if the program counter is overloaded on a register. */
1048 /* #define PC_REGNUM 15*/
1050 /* Register to use for pushing function arguments. */
1051 #define STACK_POINTER_REGNUM SP_REG
1053 /* Base register for access to local variables of the function. */
1054 #define FRAME_POINTER_REGNUM FP_REG
1056 /* Fake register that holds the address on the stack of the
1057 current function's return address. */
1058 #define RETURN_ADDRESS_POINTER_REGNUM RAP_REG
1060 /* Register to hold the addressing base for position independent
1061 code access to data items. */
1062 #define PIC_OFFSET_TABLE_REGNUM (flag_pic ? PIC_REG : INVALID_REGNUM)
1064 #define GOT_SYMBOL_NAME "*_GLOBAL_OFFSET_TABLE_"
1066 /* Value should be nonzero if functions must have frame pointers.
1067 Zero means the frame pointer need not be set up (and parms may be accessed
1068 via the stack pointer) in functions that seem suitable. */
1070 #define FRAME_POINTER_REQUIRED 0
1072 /* Definitions for register eliminations.
1074 We have three registers that can be eliminated on the SH. First, the
1075 frame pointer register can often be eliminated in favor of the stack
1076 pointer register. Secondly, the argument pointer register can always be
1077 eliminated; it is replaced with either the stack or frame pointer.
1078 Third, there is the return address pointer, which can also be replaced
1079 with either the stack or the frame pointer. */
1081 /* This is an array of structures. Each structure initializes one pair
1082 of eliminable registers. The "from" register number is given first,
1083 followed by "to". Eliminations of the same "from" register are listed
1084 in order of preference. */
1086 /* If you add any registers here that are not actually hard registers,
1087 and that have any alternative of elimination that doesn't always
1088 apply, you need to amend calc_live_regs to exclude it, because
1089 reload spills all eliminable registers where it sees an
1090 can_eliminate == 0 entry, thus making them 'live' .
1091 If you add any hard registers that can be eliminated in different
1092 ways, you have to patch reload to spill them only when all alternatives
1093 of elimination fail. */
1095 #define ELIMINABLE_REGS \
1096 {{ FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
1097 { RETURN_ADDRESS_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
1098 { RETURN_ADDRESS_POINTER_REGNUM, FRAME_POINTER_REGNUM}, \
1099 { ARG_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
1100 { ARG_POINTER_REGNUM, FRAME_POINTER_REGNUM},}
1102 /* Given FROM and TO register numbers, say whether this elimination
1104 #define CAN_ELIMINATE(FROM, TO) \
1105 (!((FROM) == FRAME_POINTER_REGNUM && FRAME_POINTER_REQUIRED))
1107 /* Define the offset between two registers, one to be eliminated, and the other
1108 its replacement, at the start of a routine. */
1110 #define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \
1111 OFFSET = initial_elimination_offset ((FROM), (TO))
1113 /* Base register for access to arguments of the function. */
1114 #define ARG_POINTER_REGNUM AP_REG
1116 /* Register in which the static-chain is passed to a function. */
1117 #define STATIC_CHAIN_REGNUM (TARGET_SH5 ? 1 : 3)
1119 /* The register in which a struct value address is passed. */
1121 #define STRUCT_VALUE_REGNUM 2
1123 /* If the structure value address is not passed in a register, define
1124 `STRUCT_VALUE' as an expression returning an RTX for the place
1125 where the address is passed. If it returns 0, the address is
1126 passed as an "invisible" first argument. */
1128 /* The Renesas calling convention doesn't quite fit into this scheme since
1129 the address is passed like an invisible argument, but one that is always
1130 passed in memory. */
1131 #define STRUCT_VALUE \
1132 (TARGET_HITACHI ? 0 : gen_rtx_REG (Pmode, STRUCT_VALUE_REGNUM))
1134 #define RETURN_IN_MEMORY(TYPE) \
1136 ? ((TYPE_MODE (TYPE) == BLKmode \
1137 ? (unsigned HOST_WIDE_INT) int_size_in_bytes (TYPE) \
1138 : GET_MODE_SIZE (TYPE_MODE (TYPE))) > 8) \
1139 : (TYPE_MODE (TYPE) == BLKmode \
1140 || TARGET_HITACHI && TREE_CODE (TYPE) == RECORD_TYPE))
1142 /* Don't default to pcc-struct-return, because we have already specified
1143 exactly how to return structures in the RETURN_IN_MEMORY macro. */
1145 #define DEFAULT_PCC_STRUCT_RETURN 0
1147 #define SHMEDIA_REGS_STACK_ADJUST() \
1148 (TARGET_SHCOMPACT && current_function_has_nonlocal_label \
1149 ? (8 * (/* r28-r35 */ 8 + /* r44-r59 */ 16 + /* tr5-tr7 */ 3) \
1150 + (TARGET_FPU_ANY ? 4 * (/* fr36 - fr63 */ 28) : 0)) \
1154 /* Define the classes of registers for register constraints in the
1155 machine description. Also define ranges of constants.
1157 One of the classes must always be named ALL_REGS and include all hard regs.
1158 If there is more than one class, another class must be named NO_REGS
1159 and contain no registers.
1161 The name GENERAL_REGS must be the name of a class (or an alias for
1162 another name such as ALL_REGS). This is the class of registers
1163 that is allowed by "g" or "r" in a register constraint.
1164 Also, registers outside this class are allocated only when
1165 instructions express preferences for them.
1167 The classes must be numbered in nondecreasing order; that is,
1168 a larger-numbered class must never be contained completely
1169 in a smaller-numbered class.
1171 For any two classes, it is very desirable that there be another
1172 class that represents their union. */
1174 /* The SH has two sorts of general registers, R0 and the rest. R0 can
1175 be used as the destination of some of the arithmetic ops. There are
1176 also some special purpose registers; the T bit register, the
1177 Procedure Return Register and the Multiply Accumulate Registers. */
1178 /* Place GENERAL_REGS after FPUL_REGS so that it will be preferred by
1179 reg_class_subunion. We don't want to have an actual union class
1180 of these, because it would only be used when both classes are calculated
1181 to give the same cost, but there is only one FPUL register.
1182 Besides, regclass fails to notice the different REGISTER_MOVE_COSTS
1183 applying to the actual instruction alternative considered. E.g., the
1184 y/r alternative of movsi_ie is considered to have no more cost that
1185 the r/r alternative, which is patently untrue. */
1208 #define N_REG_CLASSES (int) LIM_REG_CLASSES
1210 /* Give names of register classes as strings for dump file. */
1211 #define REG_CLASS_NAMES \
1226 "GENERAL_FP_REGS", \
1231 /* Define which registers fit in which classes.
1232 This is an initializer for a vector of HARD_REG_SET
1233 of length N_REG_CLASSES. */
1235 #define REG_CLASS_CONTENTS \
1238 { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, \
1240 { 0x00000001, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, \
1242 { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00040000 }, \
1244 { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00080000 }, \
1246 { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00300000 }, \
1248 { 0x00000000, 0x00000000, 0x00000000, 0x00000001, 0x00400000 }, \
1249 /* SIBCALL_REGS: Initialized in CONDITIONAL_REGISTER_USAGE. */ \
1250 { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, \
1251 /* GENERAL_REGS: */ \
1252 { 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, 0x01020000 }, \
1254 { 0x00000000, 0x00000000, 0x00000001, 0x00000000, 0x00000000 }, \
1256 { 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, 0x00000000 }, \
1257 /* DF_HI_REGS: Initialized in CONDITIONAL_REGISTER_USAGE. */ \
1258 { 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, 0x0000ff00 }, \
1260 { 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, 0x0000ff00 }, \
1262 { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00800000 }, \
1263 /* GENERAL_FP_REGS: */ \
1264 { 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0x0102ff00 }, \
1265 /* TARGET_REGS: */ \
1266 { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x000000ff }, \
1268 { 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0x01ffffff }, \
1271 /* The same information, inverted:
1272 Return the class number of the smallest class containing
1273 reg number REGNO. This could be a conditional expression
1274 or could index an array. */
1276 extern int regno_reg_class[FIRST_PSEUDO_REGISTER];
1277 #define REGNO_REG_CLASS(REGNO) regno_reg_class[(REGNO)]
1279 /* When defined, the compiler allows registers explicitly used in the
1280 rtl to be used as spill registers but prevents the compiler from
1281 extending the lifetime of these registers. */
1283 #define SMALL_REGISTER_CLASSES (! TARGET_SHMEDIA)
1285 /* The order in which register should be allocated. */
1286 /* Sometimes FP0_REGS becomes the preferred class of a floating point pseudo,
1287 and GENERAL_FP_REGS the alternate class. Since FP0 is likely to be
1288 spilled or used otherwise, we better have the FP_REGS allocated first. */
1289 #define REG_ALLOC_ORDER \
1290 {/* Caller-saved FPRs */ \
1291 65, 66, 67, 68, 69, 70, 71, 64, \
1292 72, 73, 74, 75, 80, 81, 82, 83, \
1293 84, 85, 86, 87, 88, 89, 90, 91, \
1294 92, 93, 94, 95, 96, 97, 98, 99, \
1295 /* Callee-saved FPRs */ \
1296 76, 77, 78, 79,100,101,102,103, \
1297 104,105,106,107,108,109,110,111, \
1298 112,113,114,115,116,117,118,119, \
1299 120,121,122,123,124,125,126,127, \
1300 136,137,138,139,140,141,142,143, \
1302 /* Caller-saved GPRs (except 8/9 on SH1-4) */ \
1303 1, 2, 3, 7, 6, 5, 4, 0, \
1304 8, 9, 17, 19, 20, 21, 22, 23, \
1305 36, 37, 38, 39, 40, 41, 42, 43, \
1307 /* SH1-4 callee-saved saved GPRs / SH5 partially-saved GPRs */ \
1308 10, 11, 12, 13, 14, 18, \
1309 /* SH5 callee-saved GPRs */ \
1310 28, 29, 30, 31, 32, 33, 34, 35, \
1311 44, 45, 46, 47, 48, 49, 50, 51, \
1312 52, 53, 54, 55, 56, 57, 58, 59, \
1314 /* SH5 branch target registers */ \
1315 128,129,130,131,132,133,134,135, \
1316 /* Fixed registers */ \
1317 15, 16, 24, 25, 26, 27, 63,144, \
1318 145,146,147,148,149,152 }
1320 /* The class value for index registers, and the one for base regs. */
1321 #define INDEX_REG_CLASS (TARGET_SHMEDIA ? GENERAL_REGS : R0_REGS)
1322 #define BASE_REG_CLASS GENERAL_REGS
1324 /* Get reg_class from a letter such as appears in the machine
1326 extern enum reg_class reg_class_from_letter[];
1328 /* We might use 'Rxx' constraints in the future for exotic reg classes.*/
1329 #define REG_CLASS_FROM_CONSTRAINT(C, STR) \
1330 (ISLOWER (C) ? reg_class_from_letter[(C)-'a'] : NO_REGS )
1332 /* Overview of uppercase letter constraints:
1333 A: Addresses (constraint len == 3)
1334 Ac4: sh4 cache operations
1335 Ac5: sh5 cache operations
1336 Bxx: miscellaneous constraints
1337 Bsc: SCRATCH - for the scratch register in movsi_ie in the
1339 C: Constants other than only CONST_INT (constraint len == 3)
1340 C16: 16 bit constant, literal or symbolic
1341 Csy: label or symbol
1342 Cpg: non-explicit constants that can be directly loaded into a general
1343 purpose register in PIC code. like 's' except we don't allow
1345 IJKLMNOP: CONT_INT constants
1347 J16: 0xffffffff00000000 | 0x00000000ffffffff
1348 Kxx: unsigned xx bit
1352 Q: pc relative load operand
1353 Rxx: reserved for exotic register classes.
1354 S: extra memory (storage) constraints (constraint len == 3)
1355 Sua: unaligned memory operations
1359 unused CONST_INT constraint letters: LO
1360 unused EXTRA_CONSTRAINT letters: D T U Y */
1362 #if 1 /* check that the transistion went well. */
1363 #define CONSTRAINT_LEN(C,STR) \
1364 (((C) == 'L' || (C) == 'O' || (C) == 'D' || (C) == 'T' || (C) == 'U' \
1366 || ((C) == 'I' && (((STR)[1] != '0' && (STR)[1] != '1') || ! isdigit ((STR)[2]))) \
1367 || ((C) == 'B' && ((STR)[1] != 's' || (STR)[2] != 'c')) \
1368 || ((C) == 'J' && ((STR)[1] != '1' || (STR)[2] != '6')) \
1369 || ((C) == 'K' && ((STR)[1] != '0' || (STR)[2] != '8')) \
1370 || ((C) == 'P' && ((STR)[1] != '2' || (STR)[2] != '7'))) \
1372 : ((C) == 'A' || (C) == 'B' || (C) == 'C' \
1373 || (C) == 'I' || (C) == 'J' || (C) == 'K' || (C) == 'P' \
1374 || (C) == 'R' || (C) == 'S') \
1376 : DEFAULT_CONSTRAINT_LEN ((C), (STR)))
1378 #define CONSTRAINT_LEN(C,STR) \
1379 (((C) == 'A' || (C) == 'B' || (C) == 'C' \
1380 || (C) == 'I' || (C) == 'J' || (C) == 'K' || (C) == 'P' \
1381 || (C) == 'R' || (C) == 'S') \
1382 ? 3 : DEFAULT_CONSTRAINT_LEN ((C), (STR)))
1385 /* The letters I, J, K, L and M in a register constraint string
1386 can be used to stand for particular ranges of immediate operands.
1387 This macro defines what the ranges are.
1388 C is the letter, and VALUE is a constant value.
1389 Return 1 if VALUE is in the range specified by C.
1390 I08: arithmetic operand -127..128, as used in add, sub, etc
1391 I16: arithmetic operand -32768..32767, as used in SHmedia movi and shori
1392 P27: shift operand 1,2,8 or 16
1393 K08: logical operand 0..255, as used in and, or, etc.
1396 I06: arithmetic operand -32..31, as used in SHmedia beqi, bnei and xori
1397 I10: arithmetic operand -512..511, as used in SHmedia andi, ori
1400 #define CONST_OK_FOR_I06(VALUE) (((HOST_WIDE_INT)(VALUE)) >= -32 \
1401 && ((HOST_WIDE_INT)(VALUE)) <= 31)
1402 #define CONST_OK_FOR_I08(VALUE) (((HOST_WIDE_INT)(VALUE))>= -128 \
1403 && ((HOST_WIDE_INT)(VALUE)) <= 127)
1404 #define CONST_OK_FOR_I10(VALUE) (((HOST_WIDE_INT)(VALUE)) >= -512 \
1405 && ((HOST_WIDE_INT)(VALUE)) <= 511)
1406 #define CONST_OK_FOR_I16(VALUE) (((HOST_WIDE_INT)(VALUE)) >= -32768 \
1407 && ((HOST_WIDE_INT)(VALUE)) <= 32767)
1408 #define CONST_OK_FOR_I(VALUE, STR) \
1409 ((STR)[1] == '0' && (STR)[2] == 6 ? CONST_OK_FOR_I06 (VALUE) \
1410 : (STR)[1] == '0' && (STR)[2] == '8' ? CONST_OK_FOR_I08 (VALUE) \
1411 : (STR)[1] == '1' && (STR)[2] == '0' ? CONST_OK_FOR_I10 (VALUE) \
1412 : (STR)[1] == '1' && (STR)[2] == '6' ? CONST_OK_FOR_I16 (VALUE) \
1415 #define CONST_OK_FOR_J16(VALUE) \
1416 (HOST_BITS_PER_WIDE_INT >= 64 && (VALUE) == (HOST_WIDE_INT) 0xffffffff \
1417 || (HOST_BITS_PER_WIDE_INT >= 64 && (VALUE) == (HOST_WIDE_INT) -1 << 32))
1418 #define CONST_OK_FOR_J(VALUE, STR) \
1419 ((STR)[1] == '1' && (STR)[2] == '6' ? CONST_OK_FOR_J16 (VALUE) \
1422 #define CONST_OK_FOR_K08(VALUE) (((HOST_WIDE_INT)(VALUE))>= 0 \
1423 && ((HOST_WIDE_INT)(VALUE)) <= 255)
1424 #define CONST_OK_FOR_K(VALUE, STR) \
1425 ((STR)[1] == '0' && (STR)[2] == '8' ? CONST_OK_FOR_K08 (VALUE) \
1427 #define CONST_OK_FOR_P27(VALUE) \
1428 ((VALUE)==1||(VALUE)==2||(VALUE)==8||(VALUE)==16)
1429 #define CONST_OK_FOR_P(VALUE, STR) \
1430 ((STR)[1] == '2' && (STR)[2] == '7' ? CONST_OK_FOR_P27 (VALUE) \
1432 #define CONST_OK_FOR_M(VALUE) ((VALUE)==1)
1433 #define CONST_OK_FOR_N(VALUE) ((VALUE)==0)
1434 #define CONST_OK_FOR_CONSTRAINT_P(VALUE, C, STR) \
1435 ((C) == 'I' ? CONST_OK_FOR_I ((VALUE), (STR)) \
1436 : (C) == 'J' ? CONST_OK_FOR_J ((VALUE), (STR)) \
1437 : (C) == 'K' ? CONST_OK_FOR_K ((VALUE), (STR)) \
1438 : (C) == 'M' ? CONST_OK_FOR_M (VALUE) \
1439 : (C) == 'N' ? CONST_OK_FOR_N (VALUE) \
1440 : (C) == 'P' ? CONST_OK_FOR_P ((VALUE), (STR)) \
1443 /* Similar, but for floating constants, and defining letters G and H.
1444 Here VALUE is the CONST_DOUBLE rtx itself. */
1446 #define CONST_DOUBLE_OK_FOR_LETTER_P(VALUE, C) \
1447 ((C) == 'G' ? (fp_zero_operand (VALUE) && fldi_ok ()) \
1448 : (C) == 'H' ? (fp_one_operand (VALUE) && fldi_ok ()) \
1451 /* Given an rtx X being reloaded into a reg required to be
1452 in class CLASS, return the class of reg to actually use.
1453 In general this is just CLASS; but on some machines
1454 in some cases it is preferable to use a more restrictive class. */
1456 #define PREFERRED_RELOAD_CLASS(X, CLASS) \
1457 ((CLASS) == NO_REGS && TARGET_SHMEDIA \
1458 && (GET_CODE (X) == CONST_DOUBLE \
1459 || GET_CODE (X) == SYMBOL_REF) \
1463 #define SECONDARY_OUTPUT_RELOAD_CLASS(CLASS,MODE,X) \
1464 ((((REGCLASS_HAS_FP_REG (CLASS) \
1465 && (GET_CODE (X) == REG \
1466 && (GENERAL_OR_AP_REGISTER_P (REGNO (X)) \
1467 || (FP_REGISTER_P (REGNO (X)) && (MODE) == SImode \
1468 && TARGET_FMOVD)))) \
1469 || (REGCLASS_HAS_GENERAL_REG (CLASS) \
1470 && GET_CODE (X) == REG \
1471 && FP_REGISTER_P (REGNO (X)))) \
1472 && ! TARGET_SHMEDIA \
1473 && ((MODE) == SFmode || (MODE) == SImode)) \
1475 : (((CLASS) == FPUL_REGS \
1476 || (REGCLASS_HAS_FP_REG (CLASS) \
1477 && ! TARGET_SHMEDIA && MODE == SImode)) \
1478 && (GET_CODE (X) == MEM \
1479 || (GET_CODE (X) == REG \
1480 && (REGNO (X) >= FIRST_PSEUDO_REGISTER \
1481 || REGNO (X) == T_REG \
1482 || system_reg_operand (X, VOIDmode))))) \
1484 : ((CLASS) == TARGET_REGS \
1485 || (TARGET_SHMEDIA && (CLASS) == SIBCALL_REGS)) \
1486 ? ((target_operand ((X), (MODE)) \
1487 && ! target_reg_operand ((X), (MODE))) \
1488 ? NO_REGS : GENERAL_REGS) \
1489 : (((CLASS) == MAC_REGS || (CLASS) == PR_REGS) \
1490 && GET_CODE (X) == REG && ! GENERAL_REGISTER_P (REGNO (X)) \
1491 && (CLASS) != REGNO_REG_CLASS (REGNO (X))) \
1493 : ((CLASS) != GENERAL_REGS && GET_CODE (X) == REG \
1494 && TARGET_REGISTER_P (REGNO (X))) \
1495 ? GENERAL_REGS : NO_REGS)
1497 #define SECONDARY_INPUT_RELOAD_CLASS(CLASS,MODE,X) \
1498 ((REGCLASS_HAS_FP_REG (CLASS) \
1499 && ! TARGET_SHMEDIA \
1500 && immediate_operand ((X), (MODE)) \
1501 && ! ((fp_zero_operand (X) || fp_one_operand (X)) \
1502 && (MODE) == SFmode && fldi_ok ())) \
1504 : (CLASS == FPUL_REGS \
1505 && ((GET_CODE (X) == REG \
1506 && (REGNO (X) == MACL_REG || REGNO (X) == MACH_REG \
1507 || REGNO (X) == T_REG)) \
1508 || GET_CODE (X) == PLUS)) \
1510 : CLASS == FPUL_REGS && immediate_operand ((X), (MODE)) \
1511 ? (GET_CODE (X) == CONST_INT && CONST_OK_FOR_I08 (INTVAL (X)) \
1514 : (CLASS == FPSCR_REGS \
1515 && ((GET_CODE (X) == REG && REGNO (X) >= FIRST_PSEUDO_REGISTER) \
1516 || (GET_CODE (X) == MEM && GET_CODE (XEXP ((X), 0)) == PLUS)))\
1518 : (REGCLASS_HAS_FP_REG (CLASS) \
1520 && immediate_operand ((X), (MODE)) \
1521 && (X) != CONST0_RTX (GET_MODE (X)) \
1522 && GET_MODE (X) != V4SFmode) \
1524 : SECONDARY_OUTPUT_RELOAD_CLASS((CLASS),(MODE),(X)))
1526 /* Return the maximum number of consecutive registers
1527 needed to represent mode MODE in a register of class CLASS.
1529 If TARGET_SHMEDIA, we need two FP registers per word.
1530 Otherwise we will need at most one register per word. */
1531 #define CLASS_MAX_NREGS(CLASS, MODE) \
1533 && TEST_HARD_REG_BIT (reg_class_contents[CLASS], FIRST_FP_REG) \
1534 ? (GET_MODE_SIZE (MODE) + UNITS_PER_WORD/2 - 1) / (UNITS_PER_WORD/2) \
1535 : (GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)
1537 /* If defined, gives a class of registers that cannot be used as the
1538 operand of a SUBREG that changes the mode of the object illegally. */
1539 /* ??? We need to renumber the internal numbers for the frnn registers
1540 when in little endian in order to allow mode size changes. */
1542 #define CANNOT_CHANGE_MODE_CLASS(FROM, TO, CLASS) \
1543 sh_cannot_change_mode_class (FROM, TO, CLASS)
1545 /* Stack layout; function entry, exit and calling. */
1547 /* Define the number of registers that can hold parameters.
1548 These macros are used only in other macro definitions below. */
1550 #define NPARM_REGS(MODE) \
1551 (TARGET_FPU_ANY && (MODE) == SFmode \
1552 ? (TARGET_SH5 ? 12 : 8) \
1553 : TARGET_SH4 && (GET_MODE_CLASS (MODE) == MODE_FLOAT \
1554 || GET_MODE_CLASS (MODE) == MODE_COMPLEX_FLOAT) \
1555 ? (TARGET_SH5 ? 12 : 8) \
1556 : (TARGET_SH5 ? 8 : 4))
1558 #define FIRST_PARM_REG (FIRST_GENERAL_REG + (TARGET_SH5 ? 2 : 4))
1559 #define FIRST_RET_REG (FIRST_GENERAL_REG + (TARGET_SH5 ? 2 : 0))
1561 #define FIRST_FP_PARM_REG (FIRST_FP_REG + (TARGET_SH5 ? 0 : 4))
1562 #define FIRST_FP_RET_REG FIRST_FP_REG
1564 /* Define this if pushing a word on the stack
1565 makes the stack pointer a smaller address. */
1566 #define STACK_GROWS_DOWNWARD
1568 /* Define this macro if the addresses of local variable slots are at
1569 negative offsets from the frame pointer.
1571 The SH only has positive indexes, so grow the frame up. */
1572 /* #define FRAME_GROWS_DOWNWARD */
1574 /* Offset from the frame pointer to the first local variable slot to
1576 #define STARTING_FRAME_OFFSET 0
1578 /* If we generate an insn to push BYTES bytes,
1579 this says how many the stack pointer really advances by. */
1580 /* Don't define PUSH_ROUNDING, since the hardware doesn't do this.
1581 When PUSH_ROUNDING is not defined, PARM_BOUNDARY will cause gcc to
1582 do correct alignment. */
1584 #define PUSH_ROUNDING(NPUSHED) (((NPUSHED) + 3) & ~3)
1587 /* Offset of first parameter from the argument pointer register value. */
1588 #define FIRST_PARM_OFFSET(FNDECL) 0
1590 /* Value is the number of byte of arguments automatically
1591 popped when returning from a subroutine call.
1592 FUNDECL is the declaration node of the function (as a tree),
1593 FUNTYPE is the data type of the function (as a tree),
1594 or for a library call it is an identifier node for the subroutine name.
1595 SIZE is the number of bytes of arguments passed on the stack.
1597 On the SH, the caller does not pop any of its arguments that were passed
1599 #define RETURN_POPS_ARGS(FUNDECL,FUNTYPE,SIZE) 0
1601 /* Value is the number of bytes of arguments automatically popped when
1602 calling a subroutine.
1603 CUM is the accumulated argument list.
1605 On SHcompact, the call trampoline pops arguments off the stack. */
1606 #define CALL_POPS_ARGS(CUM) (TARGET_SHCOMPACT ? (CUM).stack_regs * 8 : 0)
1608 /* Nonzero if we do not know how to pass TYPE solely in registers.
1609 Values that come in registers with inconvenient padding are stored
1610 to memory at the function start. */
1612 #define MUST_PASS_IN_STACK(MODE,TYPE) \
1614 && (TREE_CODE (TYPE_SIZE (TYPE)) != INTEGER_CST \
1615 || TREE_ADDRESSABLE (TYPE)))
1616 /* Some subroutine macros specific to this machine. */
1618 #define BASE_RETURN_VALUE_REG(MODE) \
1619 ((TARGET_FPU_ANY && ((MODE) == SFmode)) \
1620 ? FIRST_FP_RET_REG \
1621 : TARGET_FPU_ANY && (MODE) == SCmode \
1622 ? FIRST_FP_RET_REG \
1623 : (TARGET_FPU_DOUBLE \
1624 && ((MODE) == DFmode || (MODE) == SFmode \
1625 || (MODE) == DCmode || (MODE) == SCmode )) \
1626 ? FIRST_FP_RET_REG \
1629 #define BASE_ARG_REG(MODE) \
1630 ((TARGET_SH2E && ((MODE) == SFmode)) \
1631 ? FIRST_FP_PARM_REG \
1632 : TARGET_SH4 && (GET_MODE_CLASS (MODE) == MODE_FLOAT \
1633 || GET_MODE_CLASS (MODE) == MODE_COMPLEX_FLOAT)\
1634 ? FIRST_FP_PARM_REG \
1637 /* Define how to find the value returned by a function.
1638 VALTYPE is the data type of the value (as a tree).
1639 If the precise function being called is known, FUNC is its FUNCTION_DECL;
1640 otherwise, FUNC is 0.
1641 For the SH, this is like LIBCALL_VALUE, except that we must change the
1642 mode like PROMOTE_MODE does.
1643 ??? PROMOTE_MODE is ignored for non-scalar types. The set of types
1644 tested here has to be kept in sync with the one in explow.c:promote_mode. */
1646 #define FUNCTION_VALUE(VALTYPE, FUNC) \
1648 ((GET_MODE_CLASS (TYPE_MODE (VALTYPE)) == MODE_INT \
1649 && GET_MODE_SIZE (TYPE_MODE (VALTYPE)) < UNITS_PER_WORD \
1650 && (TREE_CODE (VALTYPE) == INTEGER_TYPE \
1651 || TREE_CODE (VALTYPE) == ENUMERAL_TYPE \
1652 || TREE_CODE (VALTYPE) == BOOLEAN_TYPE \
1653 || TREE_CODE (VALTYPE) == CHAR_TYPE \
1654 || TREE_CODE (VALTYPE) == REAL_TYPE \
1655 || TREE_CODE (VALTYPE) == OFFSET_TYPE)) \
1656 ? (TARGET_SHMEDIA ? DImode : SImode) : TYPE_MODE (VALTYPE)), \
1657 BASE_RETURN_VALUE_REG (TYPE_MODE (VALTYPE)))
1659 /* Define how to find the value returned by a library function
1660 assuming the value has mode MODE. */
1661 #define LIBCALL_VALUE(MODE) \
1662 gen_rtx_REG ((MODE), BASE_RETURN_VALUE_REG (MODE));
1664 /* 1 if N is a possible register number for a function value. */
1665 #define FUNCTION_VALUE_REGNO_P(REGNO) \
1666 ((REGNO) == FIRST_RET_REG || (TARGET_SH2E && (REGNO) == FIRST_FP_RET_REG) \
1667 || (TARGET_SHMEDIA_FPU && (REGNO) == FIRST_FP_RET_REG))
1669 /* 1 if N is a possible register number for function argument passing. */
1670 #define FUNCTION_ARG_REGNO_P(REGNO) \
1671 (((REGNO) >= FIRST_PARM_REG && (REGNO) < (FIRST_PARM_REG \
1672 + NPARM_REGS (SImode))) \
1673 || (TARGET_FPU_ANY \
1674 && (REGNO) >= FIRST_FP_PARM_REG && (REGNO) < (FIRST_FP_PARM_REG \
1675 + NPARM_REGS (SFmode))))
1677 /* Define a data type for recording info about an argument list
1678 during the scan of that argument list. This data type should
1679 hold all necessary information about the function itself
1680 and about the args processed so far, enough to enable macros
1681 such as FUNCTION_ARG to determine where the next arg should go.
1683 On SH, this is a single integer, which is a number of words
1684 of arguments scanned so far (including the invisible argument,
1685 if any, which holds the structure-value-address).
1686 Thus NARGREGS or more means all following args should go on the stack. */
1688 enum sh_arg_class { SH_ARG_INT = 0, SH_ARG_FLOAT = 1 };
1692 /* Nonzero if a prototype is available for the function. */
1694 /* The number of an odd floating-point register, that should be used
1695 for the next argument of type float. */
1696 int free_single_fp_reg;
1697 /* Whether we're processing an outgoing function call. */
1699 /* The number of general-purpose registers that should have been
1700 used to pass partial arguments, that are passed totally on the
1701 stack. On SHcompact, a call trampoline will pop them off the
1702 stack before calling the actual function, and, if the called
1703 function is implemented in SHcompact mode, the incoming arguments
1704 decoder will push such arguments back onto the stack. For
1705 incoming arguments, STACK_REGS also takes into account other
1706 arguments passed by reference, that the decoder will also push
1709 /* The number of general-purpose registers that should have been
1710 used to pass arguments, if the arguments didn't have to be passed
1713 /* Set by SHCOMPACT_BYREF if the current argument is to be passed by
1717 /* call_cookie is a bitmask used by call expanders, as well as
1718 function prologue and epilogues, to allow SHcompact to comply
1719 with the SH5 32-bit ABI, that requires 64-bit registers to be
1720 used even though only the lower 32-bit half is visible in
1721 SHcompact mode. The strategy is to call SHmedia trampolines.
1723 The alternatives for each of the argument-passing registers are
1724 (a) leave it unchanged; (b) pop it off the stack; (c) load its
1725 contents from the address in it; (d) add 8 to it, storing the
1726 result in the next register, then (c); (e) copy it from some
1727 floating-point register,
1729 Regarding copies from floating-point registers, r2 may only be
1730 copied from dr0. r3 may be copied from dr0 or dr2. r4 maybe
1731 copied from dr0, dr2 or dr4. r5 maybe copied from dr0, dr2,
1732 dr4 or dr6. r6 may be copied from dr0, dr2, dr4, dr6 or dr8.
1733 r7 through to r9 may be copied from dr0, dr2, dr4, dr8, dr8 or
1736 The bit mask is structured as follows:
1738 - 1 bit to tell whether to set up a return trampoline.
1740 - 3 bits to count the number consecutive registers to pop off the
1743 - 4 bits for each of r9, r8, r7 and r6.
1745 - 3 bits for each of r5, r4, r3 and r2.
1747 - 3 bits set to 0 (the most significant ones)
1750 1098 7654 3210 9876 5432 1098 7654 3210
1751 FLPF LPFL PFLP FFLP FFLP FFLP FFLP SSST
1752 2223 3344 4555 6666 7777 8888 9999 SSS-
1754 - If F is set, the register must be copied from an FP register,
1755 whose number is encoded in the remaining bits.
1757 - Else, if L is set, the register must be loaded from the address
1758 contained in it. If the P bit is *not* set, the address of the
1759 following dword should be computed first, and stored in the
1762 - Else, if P is set, the register alone should be popped off the
1765 - After all this processing, the number of registers represented
1766 in SSS will be popped off the stack. This is an optimization
1767 for pushing/popping consecutive registers, typically used for
1768 varargs and large arguments partially passed in registers.
1770 - If T is set, a return trampoline will be set up for 64-bit
1771 return values to be split into 2 32-bit registers. */
1772 #define CALL_COOKIE_RET_TRAMP_SHIFT 0
1773 #define CALL_COOKIE_RET_TRAMP(VAL) ((VAL) << CALL_COOKIE_RET_TRAMP_SHIFT)
1774 #define CALL_COOKIE_STACKSEQ_SHIFT 1
1775 #define CALL_COOKIE_STACKSEQ(VAL) ((VAL) << CALL_COOKIE_STACKSEQ_SHIFT)
1776 #define CALL_COOKIE_STACKSEQ_GET(COOKIE) \
1777 (((COOKIE) >> CALL_COOKIE_STACKSEQ_SHIFT) & 7)
1778 #define CALL_COOKIE_INT_REG_SHIFT(REG) \
1779 (4 * (7 - (REG)) + (((REG) <= 2) ? ((REG) - 2) : 1) + 3)
1780 #define CALL_COOKIE_INT_REG(REG, VAL) \
1781 ((VAL) << CALL_COOKIE_INT_REG_SHIFT (REG))
1782 #define CALL_COOKIE_INT_REG_GET(COOKIE, REG) \
1783 (((COOKIE) >> CALL_COOKIE_INT_REG_SHIFT (REG)) & ((REG) < 4 ? 7 : 15))
1787 #define CUMULATIVE_ARGS struct sh_args
1789 #define GET_SH_ARG_CLASS(MODE) \
1790 ((TARGET_FPU_ANY && (MODE) == SFmode) \
1792 /* There's no mention of complex float types in the SH5 ABI, so we
1793 should presumably handle them as aggregate types. */ \
1794 : TARGET_SH5 && GET_MODE_CLASS (MODE) == MODE_COMPLEX_FLOAT \
1796 : TARGET_FPU_DOUBLE && (GET_MODE_CLASS (MODE) == MODE_FLOAT \
1797 || GET_MODE_CLASS (MODE) == MODE_COMPLEX_FLOAT) \
1798 ? SH_ARG_FLOAT : SH_ARG_INT)
1800 #define ROUND_ADVANCE(SIZE) \
1801 (((SIZE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)
1803 /* Round a register number up to a proper boundary for an arg of mode
1806 The SH doesn't care about double alignment, so we only
1807 round doubles to even regs when asked to explicitly. */
1809 #define ROUND_REG(CUM, MODE) \
1810 (((TARGET_ALIGN_DOUBLE \
1811 || (TARGET_SH4 && ((MODE) == DFmode || (MODE) == DCmode) \
1812 && (CUM).arg_count[(int) SH_ARG_FLOAT] < NPARM_REGS (MODE)))\
1813 && GET_MODE_UNIT_SIZE ((MODE)) > UNITS_PER_WORD) \
1814 ? ((CUM).arg_count[(int) GET_SH_ARG_CLASS (MODE)] \
1815 + ((CUM).arg_count[(int) GET_SH_ARG_CLASS (MODE)] & 1)) \
1816 : (CUM).arg_count[(int) GET_SH_ARG_CLASS (MODE)])
1818 /* Initialize a variable CUM of type CUMULATIVE_ARGS
1819 for a call to a function whose data type is FNTYPE.
1820 For a library call, FNTYPE is 0.
1822 On SH, the offset always starts at 0: the first parm reg is always
1823 the same reg for a given argument class.
1825 For TARGET_HITACHI, the structure value pointer is passed in memory. */
1827 #define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, INDIRECT) \
1829 (CUM).arg_count[(int) SH_ARG_INT] = 0; \
1830 (CUM).arg_count[(int) SH_ARG_FLOAT] = 0; \
1832 = (TARGET_HITACHI && FNTYPE \
1833 && aggregate_value_p (TREE_TYPE (FNTYPE))); \
1834 (CUM).prototype_p = (FNTYPE) && TYPE_ARG_TYPES (FNTYPE); \
1835 (CUM).arg_count[(int) SH_ARG_INT] \
1836 = (TARGET_SH5 && (FNTYPE) \
1837 && aggregate_value_p (TREE_TYPE (FNTYPE))); \
1838 (CUM).free_single_fp_reg = 0; \
1839 (CUM).outgoing = 1; \
1840 (CUM).stack_regs = 0; \
1841 (CUM).byref_regs = 0; \
1844 = (CALL_COOKIE_RET_TRAMP \
1845 (TARGET_SHCOMPACT && (FNTYPE) \
1846 && (CUM).arg_count[(int) SH_ARG_INT] == 0 \
1847 && (TYPE_MODE (TREE_TYPE (FNTYPE)) == BLKmode \
1848 ? int_size_in_bytes (TREE_TYPE (FNTYPE)) \
1849 : GET_MODE_SIZE (TYPE_MODE (TREE_TYPE (FNTYPE)))) > 4 \
1850 && (BASE_RETURN_VALUE_REG (TYPE_MODE (TREE_TYPE \
1852 == FIRST_RET_REG))); \
1855 #define INIT_CUMULATIVE_LIBCALL_ARGS(CUM, MODE, LIBNAME) \
1857 INIT_CUMULATIVE_ARGS ((CUM), NULL_TREE, (LIBNAME), 0); \
1859 = (CALL_COOKIE_RET_TRAMP \
1860 (TARGET_SHCOMPACT && GET_MODE_SIZE (MODE) > 4 \
1861 && BASE_RETURN_VALUE_REG (MODE) == FIRST_RET_REG)); \
1864 #define INIT_CUMULATIVE_INCOMING_ARGS(CUM, FNTYPE, LIBNAME) \
1866 INIT_CUMULATIVE_ARGS ((CUM), (FNTYPE), (LIBNAME), 0); \
1867 (CUM).outgoing = 0; \
1870 /* Update the data in CUM to advance over an argument
1871 of mode MODE and data type TYPE.
1872 (TYPE is null for libcalls where that information may not be
1875 #define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \
1876 if ((CUM).force_mem) \
1877 (CUM).force_mem = 0; \
1878 else if (TARGET_SH5) \
1880 tree TYPE_ = ((CUM).byref && (TYPE) \
1881 ? TREE_TYPE (TYPE) \
1883 enum machine_mode MODE_ = ((CUM).byref && (TYPE) \
1884 ? TYPE_MODE (TYPE_) \
1886 int dwords = (((CUM).byref \
1888 : (MODE_) == BLKmode \
1889 ? int_size_in_bytes (TYPE_) \
1890 : GET_MODE_SIZE (MODE_)) + 7) / 8; \
1891 int numregs = MIN (dwords, NPARM_REGS (SImode) \
1892 - (CUM).arg_count[(int) SH_ARG_INT]); \
1896 (CUM).arg_count[(int) SH_ARG_INT] += numregs; \
1897 if (TARGET_SHCOMPACT \
1898 && SHCOMPACT_FORCE_ON_STACK (MODE_, TYPE_)) \
1901 |= CALL_COOKIE_INT_REG (((CUM).arg_count[(int) SH_ARG_INT] \
1903 /* N.B. We want this also for outgoing. */\
1904 (CUM).stack_regs += numregs; \
1906 else if ((CUM).byref) \
1908 if (! (CUM).outgoing) \
1909 (CUM).stack_regs += numregs; \
1910 (CUM).byref_regs += numregs; \
1914 |= CALL_COOKIE_INT_REG (((CUM).arg_count[(int) SH_ARG_INT] \
1916 while (--numregs); \
1918 |= CALL_COOKIE_INT_REG (((CUM).arg_count[(int) SH_ARG_INT] \
1921 else if (dwords > numregs) \
1923 int pushregs = numregs; \
1925 if (TARGET_SHCOMPACT) \
1926 (CUM).stack_regs += numregs; \
1927 while (pushregs < NPARM_REGS (SImode) - 1 \
1928 && (CALL_COOKIE_INT_REG_GET \
1929 ((CUM).call_cookie, \
1930 NPARM_REGS (SImode) - pushregs) \
1934 &= ~ CALL_COOKIE_INT_REG (NPARM_REGS (SImode) \
1938 if (numregs == NPARM_REGS (SImode)) \
1940 |= CALL_COOKIE_INT_REG (0, 1) \
1941 | CALL_COOKIE_STACKSEQ (numregs - 1); \
1944 |= CALL_COOKIE_STACKSEQ (numregs); \
1947 if (GET_SH_ARG_CLASS (MODE_) == SH_ARG_FLOAT \
1948 && ((NAMED) || ! (CUM).prototype_p)) \
1950 if ((MODE_) == SFmode && (CUM).free_single_fp_reg) \
1951 (CUM).free_single_fp_reg = 0; \
1952 else if ((CUM).arg_count[(int) SH_ARG_FLOAT] \
1953 < NPARM_REGS (SFmode)) \
1956 = MIN ((GET_MODE_SIZE (MODE_) + 7) / 8 * 2, \
1957 NPARM_REGS (SFmode) \
1958 - (CUM).arg_count[(int) SH_ARG_FLOAT]); \
1960 (CUM).arg_count[(int) SH_ARG_FLOAT] += numfpregs; \
1962 if (TARGET_SHCOMPACT && ! (CUM).prototype_p) \
1964 if ((CUM).outgoing && numregs > 0) \
1968 |= (CALL_COOKIE_INT_REG \
1969 ((CUM).arg_count[(int) SH_ARG_INT] \
1970 - numregs + ((numfpregs - 2) / 2), \
1971 4 + ((CUM).arg_count[(int) SH_ARG_FLOAT] \
1972 - numfpregs) / 2)); \
1974 while (numfpregs -= 2); \
1976 else if ((MODE_) == SFmode && (NAMED) \
1977 && ((CUM).arg_count[(int) SH_ARG_FLOAT] \
1978 < NPARM_REGS (SFmode))) \
1979 (CUM).free_single_fp_reg \
1980 = FIRST_FP_PARM_REG - numfpregs \
1981 + (CUM).arg_count[(int) SH_ARG_FLOAT] + 1; \
1985 else if (! TARGET_SH4 || PASS_IN_REG_P ((CUM), (MODE), (TYPE))) \
1986 ((CUM).arg_count[(int) GET_SH_ARG_CLASS (MODE)] \
1987 = (ROUND_REG ((CUM), (MODE)) \
1988 + ((MODE) == BLKmode \
1989 ? ROUND_ADVANCE (int_size_in_bytes (TYPE)) \
1990 : ROUND_ADVANCE (GET_MODE_SIZE (MODE)))))
1992 /* Return boolean indicating arg of mode MODE will be passed in a reg.
1993 This macro is only used in this file. */
1995 #define PASS_IN_REG_P(CUM, MODE, TYPE) \
1997 || (! TREE_ADDRESSABLE ((tree)(TYPE)) \
1998 && (! TARGET_HITACHI || ! AGGREGATE_TYPE_P (TYPE)))) \
1999 && ! (CUM).force_mem \
2001 ? ((MODE) == BLKmode \
2002 ? (((CUM).arg_count[(int) SH_ARG_INT] * UNITS_PER_WORD \
2003 + int_size_in_bytes (TYPE)) \
2004 <= NPARM_REGS (SImode) * UNITS_PER_WORD) \
2005 : ((ROUND_REG((CUM), (MODE)) \
2006 + HARD_REGNO_NREGS (BASE_ARG_REG (MODE), (MODE))) \
2007 <= NPARM_REGS (MODE))) \
2008 : ROUND_REG ((CUM), (MODE)) < NPARM_REGS (MODE)))
2010 /* By accident we got stuck with passing SCmode on SH4 little endian
2011 in two registers that are nominally successive - which is different from
2012 two single SFmode values, where we take endianness translation into
2013 account. That does not work at all if an odd number of registers is
2014 already in use, so that got fixed, but library functions are still more
2015 likely to use complex numbers without mixing them with SFmode arguments
2016 (which in C would have to be structures), so for the sake of ABI
2017 compatibility the way SCmode values are passed when an even number of
2018 FP registers is in use remains different from a pair of SFmode values for
2021 foo (double); a: fr5,fr4
2022 foo (float a, float b); a: fr5 b: fr4
2023 foo (__complex float a); a.real fr4 a.imag: fr5 - for consistency,
2024 this should be the other way round...
2025 foo (float a, __complex float b); a: fr5 b.real: fr4 b.imag: fr7 */
2026 #define FUNCTION_ARG_SCmode_WART 1
2028 /* Define where to put the arguments to a function.
2029 Value is zero to push the argument on the stack,
2030 or a hard register in which to store the argument.
2032 MODE is the argument's machine mode.
2033 TYPE is the data type of the argument (as a tree).
2034 This is null for libcalls where that information may
2036 CUM is a variable of type CUMULATIVE_ARGS which gives info about
2037 the preceding args and about the function being called.
2038 NAMED is nonzero if this argument is a named parameter
2039 (otherwise it is an extra parameter matching an ellipsis).
2041 On SH the first args are normally in registers
2042 and the rest are pushed. Any arg that starts within the first
2043 NPARM_REGS words is at least partially passed in a register unless
2044 its data type forbids. */
2046 #define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) \
2048 && PASS_IN_REG_P ((CUM), (MODE), (TYPE)) \
2049 && ((NAMED) || !TARGET_HITACHI)) \
2050 ? (((MODE) == SCmode && TARGET_SH4 && TARGET_LITTLE_ENDIAN \
2051 && (! FUNCTION_ARG_SCmode_WART || (ROUND_REG ((CUM), (MODE)) & 1)))\
2052 ? (gen_rtx_PARALLEL \
2056 (gen_rtx_EXPR_LIST \
2058 gen_rtx_REG (SFmode, \
2059 BASE_ARG_REG (MODE) \
2060 + ROUND_REG ((CUM), (MODE)) ^ 1), \
2062 (gen_rtx_EXPR_LIST \
2064 gen_rtx_REG (SFmode, \
2065 BASE_ARG_REG (MODE) \
2066 + (ROUND_REG ((CUM), (MODE)) + 1) ^ 1), \
2068 : gen_rtx_REG ((MODE), \
2069 ((BASE_ARG_REG (MODE) + ROUND_REG ((CUM), (MODE))) \
2070 ^ ((MODE) == SFmode && TARGET_SH4 \
2071 && TARGET_LITTLE_ENDIAN != 0)))) \
2073 ? ((MODE) == VOIDmode && TARGET_SHCOMPACT \
2074 ? GEN_INT ((CUM).call_cookie) \
2075 /* The following test assumes unnamed arguments are promoted to \
2077 : (MODE) == SFmode && (CUM).free_single_fp_reg \
2078 ? SH5_PROTOTYPED_FLOAT_ARG ((CUM), (MODE), (CUM).free_single_fp_reg) \
2079 : (GET_SH_ARG_CLASS (MODE) == SH_ARG_FLOAT \
2080 && ((NAMED) || ! (CUM).prototype_p) \
2081 && (CUM).arg_count[(int) SH_ARG_FLOAT] < NPARM_REGS (SFmode)) \
2082 ? ((! (CUM).prototype_p && TARGET_SHMEDIA) \
2083 ? SH5_PROTOTYPELESS_FLOAT_ARG ((CUM), (MODE)) \
2084 : SH5_PROTOTYPED_FLOAT_ARG ((CUM), (MODE), \
2086 + (CUM).arg_count[(int) SH_ARG_FLOAT])) \
2087 : ((CUM).arg_count[(int) SH_ARG_INT] < NPARM_REGS (SImode) \
2088 && (! TARGET_SHCOMPACT \
2089 || (! SHCOMPACT_FORCE_ON_STACK ((MODE), (TYPE)) \
2090 && ! SH5_WOULD_BE_PARTIAL_NREGS ((CUM), (MODE), \
2091 (TYPE), (NAMED))))) \
2092 ? gen_rtx_REG ((MODE), (FIRST_PARM_REG \
2093 + (CUM).arg_count[(int) SH_ARG_INT])) \
2097 /* Whether an argument must be passed by reference. On SHcompact, we
2098 pretend arguments wider than 32-bits that would have been passed in
2099 registers are passed by reference, so that an SHmedia trampoline
2100 loads them into the full 64-bits registers. */
2101 #define FUNCTION_ARG_PASS_BY_REFERENCE(CUM,MODE,TYPE,NAMED) \
2102 (MUST_PASS_IN_STACK ((MODE), (TYPE)) \
2103 || SHCOMPACT_BYREF ((CUM), (MODE), (TYPE), (NAMED)))
2105 #define SHCOMPACT_BYREF(CUM, MODE, TYPE, NAMED) \
2107 = (TARGET_SHCOMPACT \
2108 && (CUM).arg_count[(int) SH_ARG_INT] < NPARM_REGS (SImode) \
2109 && (! (NAMED) || GET_SH_ARG_CLASS (MODE) == SH_ARG_INT \
2110 || (GET_SH_ARG_CLASS (MODE) == SH_ARG_FLOAT \
2111 && ((CUM).arg_count[(int) SH_ARG_FLOAT] \
2112 >= NPARM_REGS (SFmode)))) \
2113 && ((MODE) == BLKmode ? int_size_in_bytes (TYPE) \
2114 : GET_MODE_SIZE (MODE)) > 4 \
2115 && ! SHCOMPACT_FORCE_ON_STACK ((MODE), (TYPE)) \
2116 && ! SH5_WOULD_BE_PARTIAL_NREGS ((CUM), (MODE), \
2118 ? ((MODE) == BLKmode ? int_size_in_bytes (TYPE) \
2119 : GET_MODE_SIZE (MODE)) \
2122 /* If an argument of size 5, 6 or 7 bytes is to be passed in a 64-bit
2123 register in SHcompact mode, it must be padded in the most
2124 significant end. This means that passing it by reference wouldn't
2125 pad properly on a big-endian machine. In this particular case, we
2126 pass this argument on the stack, in a way that the call trampoline
2127 will load its value into the appropriate register. */
2128 #define SHCOMPACT_FORCE_ON_STACK(MODE,TYPE) \
2129 ((MODE) == BLKmode \
2130 && TARGET_SHCOMPACT \
2131 && ! TARGET_LITTLE_ENDIAN \
2132 && int_size_in_bytes (TYPE) > 4 \
2133 && int_size_in_bytes (TYPE) < 8)
2135 /* Minimum alignment for an argument to be passed by callee-copy
2136 reference. We need such arguments to be aligned to 8 byte
2137 boundaries, because they'll be loaded using quad loads. */
2138 #define SH_MIN_ALIGN_FOR_CALLEE_COPY (8 * BITS_PER_UNIT)
2140 #define FUNCTION_ARG_CALLEE_COPIES(CUM,MODE,TYPE,NAMED) \
2142 && (((MODE) == BLKmode ? TYPE_ALIGN (TYPE) \
2143 : GET_MODE_ALIGNMENT (MODE)) \
2144 % SH_MIN_ALIGN_FOR_CALLEE_COPY == 0))
2146 /* The SH5 ABI requires floating-point arguments to be passed to
2147 functions without a prototype in both an FP register and a regular
2148 register or the stack. When passing the argument in both FP and
2149 general-purpose registers, list the FP register first. */
2150 #define SH5_PROTOTYPELESS_FLOAT_ARG(CUM,MODE) \
2156 ((CUM).arg_count[(int) SH_ARG_INT] < NPARM_REGS (SImode) \
2157 ? gen_rtx_REG ((MODE), FIRST_FP_PARM_REG \
2158 + (CUM).arg_count[(int) SH_ARG_FLOAT]) \
2163 ((CUM).arg_count[(int) SH_ARG_INT] < NPARM_REGS (SImode) \
2164 ? gen_rtx_REG ((MODE), FIRST_PARM_REG \
2165 + (CUM).arg_count[(int) SH_ARG_INT]) \
2166 : gen_rtx_REG ((MODE), FIRST_FP_PARM_REG \
2167 + (CUM).arg_count[(int) SH_ARG_FLOAT])), \
2170 /* The SH5 ABI requires regular registers or stack slots to be
2171 reserved for floating-point arguments. Registers are taken care of
2172 in FUNCTION_ARG_ADVANCE, but stack slots must be reserved here.
2173 Unfortunately, there's no way to just reserve a stack slot, so
2174 we'll end up needlessly storing a copy of the argument in the
2175 stack. For incoming arguments, however, the PARALLEL will be
2176 optimized to the register-only form, and the value in the stack
2177 slot won't be used at all. */
2178 #define SH5_PROTOTYPED_FLOAT_ARG(CUM,MODE,REG) \
2179 ((CUM).arg_count[(int) SH_ARG_INT] < NPARM_REGS (SImode) \
2180 ? gen_rtx_REG ((MODE), (REG)) \
2181 : gen_rtx_PARALLEL ((MODE), \
2184 (VOIDmode, NULL_RTX, \
2187 (VOIDmode, gen_rtx_REG ((MODE), \
2191 #define STRICT_ARGUMENT_NAMING TARGET_SH5
2193 #define PRETEND_OUTGOING_VARARGS_NAMED (! TARGET_HITACHI && ! TARGET_SH5)
2195 /* For an arg passed partly in registers and partly in memory,
2196 this is the number of registers used.
2197 For args passed entirely in registers or entirely in memory, zero.
2199 We sometimes split args. */
2201 #define FUNCTION_ARG_PARTIAL_NREGS(CUM, MODE, TYPE, NAMED) \
2203 && PASS_IN_REG_P ((CUM), (MODE), (TYPE)) \
2205 && (ROUND_REG ((CUM), (MODE)) \
2206 + ((MODE) != BLKmode \
2207 ? ROUND_ADVANCE (GET_MODE_SIZE (MODE)) \
2208 : ROUND_ADVANCE (int_size_in_bytes (TYPE))) \
2209 > NPARM_REGS (MODE))) \
2210 ? NPARM_REGS (MODE) - ROUND_REG ((CUM), (MODE)) \
2211 : (SH5_WOULD_BE_PARTIAL_NREGS ((CUM), (MODE), (TYPE), (NAMED)) \
2212 && ! TARGET_SHCOMPACT) \
2213 ? NPARM_REGS (SImode) - (CUM).arg_count[(int) SH_ARG_INT] \
2216 #define SH5_WOULD_BE_PARTIAL_NREGS(CUM, MODE, TYPE, NAMED) \
2218 && ((MODE) == BLKmode || (MODE) == TImode || (MODE) == CDImode \
2219 || (MODE) == DCmode) \
2220 && ((CUM).arg_count[(int) SH_ARG_INT] \
2221 + (int_size_in_bytes (TYPE) + 7) / 8) > NPARM_REGS (SImode))
2223 /* Perform any needed actions needed for a function that is receiving a
2224 variable number of arguments. */
2226 /* We actually emit the code in sh_expand_prologue. We used to use
2227 a static variable to flag that we need to emit this code, but that
2228 doesn't when inlining, when functions are deferred and then emitted
2229 later. Fortunately, we already have two flags that are part of struct
2230 function that tell if a function uses varargs or stdarg. */
2231 #define SETUP_INCOMING_VARARGS(ASF, MODE, TYPE, PAS, ST) do \
2232 if (! current_function_stdarg) \
2236 /* Define the `__builtin_va_list' type for the ABI. */
2237 #define BUILD_VA_LIST_TYPE(VALIST) \
2238 (VALIST) = sh_build_va_list ()
2240 /* Implement `va_start' for varargs and stdarg. */
2241 #define EXPAND_BUILTIN_VA_START(valist, nextarg) \
2242 sh_va_start (valist, nextarg)
2244 /* Implement `va_arg'. */
2245 #define EXPAND_BUILTIN_VA_ARG(valist, type) \
2246 sh_va_arg (valist, type)
2248 /* Call the function profiler with a given profile label.
2249 We use two .aligns, so as to make sure that both the .long is aligned
2250 on a 4 byte boundary, and that the .long is a fixed distance (2 bytes)
2251 from the trapa instruction. */
2253 #define FUNCTION_PROFILER(STREAM,LABELNO) \
2255 fprintf((STREAM), "\t.align\t2\n"); \
2256 fprintf((STREAM), "\ttrapa\t#33\n"); \
2257 fprintf((STREAM), "\t.align\t2\n"); \
2258 asm_fprintf((STREAM), "\t.long\t%LLP%d\n", (LABELNO)); \
2261 /* Define this macro if the code for function profiling should come
2262 before the function prologue. Normally, the profiling code comes
2265 #define PROFILE_BEFORE_PROLOGUE
2267 /* EXIT_IGNORE_STACK should be nonzero if, when returning from a function,
2268 the stack pointer does not matter. The value is tested only in
2269 functions that have frame pointers.
2270 No definition is equivalent to always zero. */
2272 #define EXIT_IGNORE_STACK 1
2275 On the SH, the trampoline looks like
2276 2 0002 D202 mov.l l2,r2
2277 1 0000 D301 mov.l l1,r3
2280 5 0008 00000000 l1: .long area
2281 6 000c 00000000 l2: .long function */
2283 /* Length in units of the trampoline for entering a nested function. */
2284 #define TRAMPOLINE_SIZE (TARGET_SHMEDIA64 ? 40 : TARGET_SH5 ? 24 : 16)
2286 /* Alignment required for a trampoline in bits . */
2287 #define TRAMPOLINE_ALIGNMENT \
2288 ((CACHE_LOG < 3 || (TARGET_SMALLCODE && ! TARGET_HARVARD)) ? 32 \
2289 : TARGET_SHMEDIA ? 256 : 64)
2291 /* Emit RTL insns to initialize the variable parts of a trampoline.
2292 FNADDR is an RTX for the address of the function's pure code.
2293 CXT is an RTX for the static chain value for the function. */
2295 #define INITIALIZE_TRAMPOLINE(TRAMP, FNADDR, CXT) \
2296 sh_initialize_trampoline ((TRAMP), (FNADDR), (CXT))
2298 /* On SH5, trampolines are SHmedia code, so add 1 to the address. */
2300 #define TRAMPOLINE_ADJUST_ADDRESS(TRAMP) do \
2302 if (TARGET_SHMEDIA) \
2303 (TRAMP) = expand_simple_binop (Pmode, PLUS, (TRAMP), GEN_INT (1), \
2304 gen_reg_rtx (Pmode), 0, \
2308 /* A C expression whose value is RTL representing the value of the return
2309 address for the frame COUNT steps up from the current frame.
2310 FRAMEADDR is already the frame pointer of the COUNT frame, so we
2311 can ignore COUNT. */
2313 #define RETURN_ADDR_RTX(COUNT, FRAME) \
2315 ? get_hard_reg_initial_val (Pmode, TARGET_SHMEDIA ? PR_MEDIA_REG : PR_REG) \
2318 /* A C expression whose value is RTL representing the location of the
2319 incoming return address at the beginning of any function, before the
2320 prologue. This RTL is either a REG, indicating that the return
2321 value is saved in REG, or a MEM representing a location in
2323 #define INCOMING_RETURN_ADDR_RTX \
2324 gen_rtx_REG (Pmode, TARGET_SHMEDIA ? PR_MEDIA_REG : PR_REG)
2326 /* Generate necessary RTL for __builtin_saveregs(). */
2327 #define EXPAND_BUILTIN_SAVEREGS() sh_builtin_saveregs ()
2329 /* Addressing modes, and classification of registers for them. */
2330 #define HAVE_POST_INCREMENT TARGET_SH1
2331 #define HAVE_PRE_DECREMENT TARGET_SH1
2333 #define USE_LOAD_POST_INCREMENT(mode) ((mode == SImode || mode == DImode) \
2335 #define USE_LOAD_PRE_DECREMENT(mode) 0
2336 #define USE_STORE_POST_INCREMENT(mode) 0
2337 #define USE_STORE_PRE_DECREMENT(mode) ((mode == SImode || mode == DImode) \
2340 #define MOVE_BY_PIECES_P(SIZE, ALIGN) (move_by_pieces_ninsns (SIZE, ALIGN) \
2341 < (TARGET_SMALLCODE ? 2 : \
2342 ((ALIGN >= 32) ? 16 : 2)))
2344 /* Macros to check register numbers against specific register classes. */
2346 /* These assume that REGNO is a hard or pseudo reg number.
2347 They give nonzero only if REGNO is a hard reg of the suitable class
2348 or a pseudo reg currently allocated to a suitable hard reg.
2349 Since they use reg_renumber, they are safe only once reg_renumber
2350 has been allocated, which happens in local-alloc.c. */
2352 #define REGNO_OK_FOR_BASE_P(REGNO) \
2353 (GENERAL_OR_AP_REGISTER_P (REGNO) \
2354 || GENERAL_OR_AP_REGISTER_P (reg_renumber[(REGNO)]))
2355 #define REGNO_OK_FOR_INDEX_P(REGNO) \
2357 ? (GENERAL_REGISTER_P (REGNO) \
2358 || GENERAL_REGISTER_P ((unsigned) reg_renumber[(REGNO)])) \
2359 : (REGNO) == R0_REG || (unsigned) reg_renumber[(REGNO)] == R0_REG)
2361 /* Maximum number of registers that can appear in a valid memory
2364 #define MAX_REGS_PER_ADDRESS 2
2366 /* Recognize any constant value that is a valid address. */
2368 #define CONSTANT_ADDRESS_P(X) (GET_CODE (X) == LABEL_REF)
2370 /* Nonzero if the constant value X is a legitimate general operand. */
2372 #define LEGITIMATE_CONSTANT_P(X) \
2374 ? ((GET_MODE (X) != DFmode \
2375 && GET_MODE_CLASS (GET_MODE (X)) != MODE_VECTOR_FLOAT) \
2376 || (X) == CONST0_RTX (GET_MODE (X)) \
2377 || ! TARGET_SHMEDIA_FPU \
2378 || TARGET_SHMEDIA64) \
2379 : (GET_CODE (X) != CONST_DOUBLE \
2380 || GET_MODE (X) == DFmode || GET_MODE (X) == SFmode \
2381 || (TARGET_SH2E && (fp_zero_operand (X) || fp_one_operand (X)))))
2383 /* The macros REG_OK_FOR..._P assume that the arg is a REG rtx
2384 and check its validity for a certain class.
2385 We have two alternate definitions for each of them.
2386 The usual definition accepts all pseudo regs; the other rejects
2387 them unless they have been allocated suitable hard regs.
2388 The symbol REG_OK_STRICT causes the latter definition to be used. */
2390 #ifndef REG_OK_STRICT
2392 /* Nonzero if X is a hard reg that can be used as a base reg
2393 or if it is a pseudo reg. */
2394 #define REG_OK_FOR_BASE_P(X) \
2395 (GENERAL_OR_AP_REGISTER_P (REGNO (X)) || REGNO (X) >= FIRST_PSEUDO_REGISTER)
2397 /* Nonzero if X is a hard reg that can be used as an index
2398 or if it is a pseudo reg. */
2399 #define REG_OK_FOR_INDEX_P(X) \
2400 ((TARGET_SHMEDIA ? GENERAL_REGISTER_P (REGNO (X)) \
2401 : REGNO (X) == R0_REG) || REGNO (X) >= FIRST_PSEUDO_REGISTER)
2403 /* Nonzero if X/OFFSET is a hard reg that can be used as an index
2404 or if X is a pseudo reg. */
2405 #define SUBREG_OK_FOR_INDEX_P(X, OFFSET) \
2406 ((TARGET_SHMEDIA ? GENERAL_REGISTER_P (REGNO (X)) \
2407 : REGNO (X) == R0_REG && OFFSET == 0) || REGNO (X) >= FIRST_PSEUDO_REGISTER)
2411 /* Nonzero if X is a hard reg that can be used as a base reg. */
2412 #define REG_OK_FOR_BASE_P(X) \
2413 REGNO_OK_FOR_BASE_P (REGNO (X))
2415 /* Nonzero if X is a hard reg that can be used as an index. */
2416 #define REG_OK_FOR_INDEX_P(X) \
2417 REGNO_OK_FOR_INDEX_P (REGNO (X))
2419 /* Nonzero if X/OFFSET is a hard reg that can be used as an index. */
2420 #define SUBREG_OK_FOR_INDEX_P(X, OFFSET) \
2421 (REGNO_OK_FOR_INDEX_P (REGNO (X)) && (OFFSET) == 0)
2425 /* The 'Q' constraint is a pc relative load operand. */
2426 #define EXTRA_CONSTRAINT_Q(OP) \
2427 (GET_CODE (OP) == MEM \
2428 && ((GET_CODE (XEXP ((OP), 0)) == LABEL_REF) \
2429 || (GET_CODE (XEXP ((OP), 0)) == CONST \
2430 && GET_CODE (XEXP (XEXP ((OP), 0), 0)) == PLUS \
2431 && GET_CODE (XEXP (XEXP (XEXP ((OP), 0), 0), 0)) == LABEL_REF \
2432 && GET_CODE (XEXP (XEXP (XEXP ((OP), 0), 0), 1)) == CONST_INT)))
2434 /* Extra address constraints. */
2435 #define EXTRA_CONSTRAINT_A(OP, STR) 0
2437 /* Constraint for selecting FLDI0 or FLDI1 instruction. If the clobber
2438 operand is not SCRATCH (i.e. REG) then R0 is probably being
2439 used, hence mova is being used, hence do not select this pattern */
2440 #define EXTRA_CONSTRAINT_Bsc(OP) (GET_CODE(OP) == SCRATCH)
2441 #define EXTRA_CONSTRAINT_B(OP, STR) \
2442 ((STR)[1] == 's' && (STR)[2] == 'c' ? EXTRA_CONSTRAINT_Bsc (OP) \
2445 /* The `C16' constraint is a 16-bit constant, literal or symbolic. */
2446 #define EXTRA_CONSTRAINT_C16(OP) \
2447 (GET_CODE (OP) == CONST \
2448 && GET_CODE (XEXP ((OP), 0)) == SIGN_EXTEND \
2449 && GET_MODE (XEXP ((OP), 0)) == DImode \
2450 && GET_CODE (XEXP (XEXP ((OP), 0), 0)) == TRUNCATE \
2451 && GET_MODE (XEXP (XEXP ((OP), 0), 0)) == HImode \
2452 && (MOVI_SHORI_BASE_OPERAND_P (XEXP (XEXP (XEXP ((OP), 0), 0), 0)) \
2453 || (GET_CODE (XEXP (XEXP (XEXP ((OP), 0), 0), 0)) == ASHIFTRT \
2454 && (MOVI_SHORI_BASE_OPERAND_P \
2455 (XEXP (XEXP (XEXP (XEXP ((OP), 0), 0), 0), 0))) \
2456 && GET_CODE (XEXP (XEXP (XEXP (XEXP ((OP), 0), 0), 0), \
2459 /* Check whether OP is a datalabel unspec. */
2460 #define DATALABEL_REF_NO_CONST_P(OP) \
2461 (GET_CODE (OP) == UNSPEC \
2462 && XINT ((OP), 1) == UNSPEC_DATALABEL \
2463 && XVECLEN ((OP), 0) == 1 \
2464 && (GET_CODE (XVECEXP ((OP), 0, 0)) == SYMBOL_REF \
2465 || GET_CODE (XVECEXP ((OP), 0, 0)) == LABEL_REF))
2467 /* Check whether OP is a datalabel unspec, possibly enclosed within a
2469 #define DATALABEL_REF_P(OP) \
2470 ((GET_CODE (OP) == CONST && DATALABEL_REF_NO_CONST_P (XEXP ((OP), 0))) \
2471 || DATALABEL_REF_NO_CONST_P (OP))
2473 #define GOT_ENTRY_P(OP) \
2474 (GET_CODE (OP) == CONST && GET_CODE (XEXP ((OP), 0)) == UNSPEC \
2475 && XINT (XEXP ((OP), 0), 1) == UNSPEC_GOT)
2477 #define GOTPLT_ENTRY_P(OP) \
2478 (GET_CODE (OP) == CONST && GET_CODE (XEXP ((OP), 0)) == UNSPEC \
2479 && XINT (XEXP ((OP), 0), 1) == UNSPEC_GOTPLT)
2481 #define UNSPEC_GOTOFF_P(OP) \
2482 (GET_CODE (OP) == UNSPEC && XINT ((OP), 1) == UNSPEC_GOTOFF)
2484 #define GOTOFF_P(OP) \
2485 (GET_CODE (OP) == CONST \
2486 && (UNSPEC_GOTOFF_P (XEXP ((OP), 0)) \
2487 || (GET_CODE (XEXP ((OP), 0)) == PLUS \
2488 && UNSPEC_GOTOFF_P (XEXP (XEXP ((OP), 0), 0)) \
2489 && GET_CODE (XEXP (XEXP ((OP), 0), 1)) == CONST_INT)))
2491 #define PIC_ADDR_P(OP) \
2492 (GET_CODE (OP) == CONST && GET_CODE (XEXP ((OP), 0)) == UNSPEC \
2493 && XINT (XEXP ((OP), 0), 1) == UNSPEC_PIC)
2495 #define PIC_OFFSET_P(OP) \
2497 && GET_CODE (XVECEXP (XEXP ((OP), 0), 0, 0)) == MINUS \
2498 && reg_mentioned_p (pc_rtx, XEXP (XVECEXP (XEXP ((OP), 0), 0, 0), 1)))
2500 #define PIC_DIRECT_ADDR_P(OP) \
2501 (PIC_ADDR_P (OP) && GET_CODE (XVECEXP (XEXP ((OP), 0), 0, 0)) != MINUS)
2503 #define NON_PIC_REFERENCE_P(OP) \
2504 (GET_CODE (OP) == LABEL_REF || GET_CODE (OP) == SYMBOL_REF \
2505 || DATALABEL_REF_P (OP) \
2506 || (GET_CODE (OP) == CONST && GET_CODE (XEXP ((OP), 0)) == PLUS \
2507 && (GET_CODE (XEXP (XEXP ((OP), 0), 0)) == SYMBOL_REF \
2508 || DATALABEL_REF_P (XEXP (XEXP ((OP), 0), 0))) \
2509 && GET_CODE (XEXP (XEXP ((OP), 0), 1)) == CONST_INT))
2511 #define PIC_REFERENCE_P(OP) \
2512 (GOT_ENTRY_P (OP) || GOTPLT_ENTRY_P (OP) \
2513 || GOTOFF_P (OP) || PIC_ADDR_P (OP))
2515 #define MOVI_SHORI_BASE_OPERAND_P(OP) \
2517 ? (GOT_ENTRY_P (OP) || GOTPLT_ENTRY_P (OP) || GOTOFF_P (OP) \
2518 || PIC_OFFSET_P (OP)) \
2519 : NON_PIC_REFERENCE_P (OP))
2521 /* The `Csy' constraint is a label or a symbol. */
2522 #define EXTRA_CONSTRAINT_Csy(OP) \
2523 (NON_PIC_REFERENCE_P (OP) || PIC_DIRECT_ADDR_P (OP))
2525 /* A zero in any shape or form. */
2526 #define EXTRA_CONSTRAINT_Z(OP) \
2527 ((OP) == CONST0_RTX (GET_MODE (OP)))
2529 /* Any vector constant we can handle. */
2530 #define EXTRA_CONSTRAINT_W(OP) \
2531 (GET_CODE (OP) == CONST_VECTOR \
2532 && (sh_rep_vec ((OP), VOIDmode) \
2533 || (HOST_BITS_PER_WIDE_INT >= 64 \
2534 ? sh_const_vec ((OP), VOIDmode) \
2535 : sh_1el_vec ((OP), VOIDmode))))
2537 /* A non-explicit constant that can be loaded directly into a general purpose
2538 register. This is like 's' except we don't allow PIC_DIRECT_ADDR_P. */
2539 #define EXTRA_CONSTRAINT_Cpg(OP) \
2541 && GET_CODE (OP) != CONST_INT \
2542 && GET_CODE (OP) != CONST_DOUBLE \
2544 || (LEGITIMATE_PIC_OPERAND_P (OP) \
2545 && (! PIC_ADDR_P (OP) || PIC_OFFSET_P (OP)) \
2546 && GET_CODE (OP) != LABEL_REF)))
2547 #define EXTRA_CONSTRAINT_C(OP, STR) \
2548 ((STR)[1] == '1' && (STR)[2] == '6' ? EXTRA_CONSTRAINT_C16 (OP) \
2549 : (STR)[1] == 's' && (STR)[2] == 'y' ? EXTRA_CONSTRAINT_Csy (OP) \
2550 : (STR)[1] == 'p' && (STR)[2] == 'g' ? EXTRA_CONSTRAINT_Cpg (OP) \
2553 #define EXTRA_MEMORY_CONSTRAINT(C,STR) ((C) == 'S')
2554 #define EXTRA_CONSTRAINT_Sr0(OP) \
2555 (memory_operand((OP), GET_MODE (OP)) \
2556 && ! refers_to_regno_p (R0_REG, R0_REG + 1, OP, (rtx *)0))
2557 #define EXTRA_CONSTRAINT_S(OP, STR) \
2558 ((STR)[1] == 'r' && (STR)[2] == '0' ? EXTRA_CONSTRAINT_Sr0 (OP) \
2561 #define EXTRA_CONSTRAINT_STR(OP, C, STR) \
2562 ((C) == 'Q' ? EXTRA_CONSTRAINT_Q (OP) \
2563 : (C) == 'A' ? EXTRA_CONSTRAINT_A ((OP), (STR)) \
2564 : (C) == 'B' ? EXTRA_CONSTRAINT_B ((OP), (STR)) \
2565 : (C) == 'C' ? EXTRA_CONSTRAINT_C ((OP), (STR)) \
2566 : (C) == 'S' ? EXTRA_CONSTRAINT_S ((OP), (STR)) \
2567 : (C) == 'W' ? EXTRA_CONSTRAINT_W (OP) \
2568 : (C) == 'Z' ? EXTRA_CONSTRAINT_Z (OP) \
2571 /* GO_IF_LEGITIMATE_ADDRESS recognizes an RTL expression
2572 that is a valid memory address for an instruction.
2573 The MODE argument is the machine mode for the MEM expression
2574 that wants to use this address. */
2576 #define MODE_DISP_OK_4(X,MODE) \
2577 (GET_MODE_SIZE (MODE) == 4 && (unsigned) INTVAL (X) < 64 \
2578 && ! (INTVAL (X) & 3) && ! (TARGET_SH2E && (MODE) == SFmode))
2580 #define MODE_DISP_OK_8(X,MODE) \
2581 ((GET_MODE_SIZE(MODE)==8) && ((unsigned)INTVAL(X)<60) \
2582 && ! (INTVAL(X) & 3) && ! (TARGET_SH4 && (MODE) == DFmode))
2584 #define BASE_REGISTER_RTX_P(X) \
2585 ((GET_CODE (X) == REG && REG_OK_FOR_BASE_P (X)) \
2586 || (GET_CODE (X) == SUBREG \
2587 && GET_CODE (SUBREG_REG (X)) == REG \
2588 && REG_OK_FOR_BASE_P (SUBREG_REG (X))))
2590 /* Since this must be r0, which is a single register class, we must check
2591 SUBREGs more carefully, to be sure that we don't accept one that extends
2592 outside the class. */
2593 #define INDEX_REGISTER_RTX_P(X) \
2594 ((GET_CODE (X) == REG && REG_OK_FOR_INDEX_P (X)) \
2595 || (GET_CODE (X) == SUBREG \
2596 && GET_CODE (SUBREG_REG (X)) == REG \
2597 && SUBREG_OK_FOR_INDEX_P (SUBREG_REG (X), SUBREG_BYTE (X))))
2599 /* Jump to LABEL if X is a valid address RTX. This must also take
2600 REG_OK_STRICT into account when deciding about valid registers, but it uses
2601 the above macros so we are in luck.
2609 /* ??? The SH2e does not have the REG+disp addressing mode when loading values
2610 into the FRx registers. We implement this by setting the maximum offset
2611 to zero when the value is SFmode. This also restricts loading of SFmode
2612 values into the integer registers, but that can't be helped. */
2614 /* The SH allows a displacement in a QI or HI amode, but only when the
2615 other operand is R0. GCC doesn't handle this very well, so we forgo
2618 A legitimate index for a QI or HI is 0, SI can be any number 0..63,
2619 DI can be any number 0..60. */
2621 #define GO_IF_LEGITIMATE_INDEX(MODE, OP, LABEL) \
2623 if (GET_CODE (OP) == CONST_INT) \
2625 if (TARGET_SHMEDIA) \
2627 int MODE_SIZE = GET_MODE_SIZE (MODE); \
2628 if (! (INTVAL (OP) & (MODE_SIZE - 1)) \
2629 && INTVAL (OP) >= -512 * MODE_SIZE \
2630 && INTVAL (OP) < 512 * MODE_SIZE) \
2635 if (MODE_DISP_OK_4 ((OP), (MODE))) goto LABEL; \
2636 if (MODE_DISP_OK_8 ((OP), (MODE))) goto LABEL; \
2640 #define GO_IF_LEGITIMATE_ADDRESS(MODE, X, LABEL) \
2642 if (BASE_REGISTER_RTX_P (X)) \
2644 else if ((GET_CODE (X) == POST_INC || GET_CODE (X) == PRE_DEC) \
2645 && ! TARGET_SHMEDIA \
2646 && BASE_REGISTER_RTX_P (XEXP ((X), 0))) \
2648 else if (GET_CODE (X) == PLUS \
2649 && ((MODE) != PSImode || reload_completed)) \
2651 rtx xop0 = XEXP ((X), 0); \
2652 rtx xop1 = XEXP ((X), 1); \
2653 if (GET_MODE_SIZE (MODE) <= 8 && BASE_REGISTER_RTX_P (xop0)) \
2654 GO_IF_LEGITIMATE_INDEX ((MODE), xop1, LABEL); \
2655 if (GET_MODE_SIZE (MODE) <= 4 \
2656 || (TARGET_SHMEDIA && GET_MODE_SIZE (MODE) <= 8) \
2657 || (TARGET_SH4 && TARGET_FMOVD && MODE == DFmode)) \
2659 if (BASE_REGISTER_RTX_P (xop1) && INDEX_REGISTER_RTX_P (xop0))\
2661 if (INDEX_REGISTER_RTX_P (xop1) && BASE_REGISTER_RTX_P (xop0))\
2667 /* Try machine-dependent ways of modifying an illegitimate address
2668 to be legitimate. If we find one, return the new, valid address.
2669 This macro is used in only one place: `memory_address' in explow.c.
2671 OLDX is the address as it was before break_out_memory_refs was called.
2672 In some cases it is useful to look at this to decide what needs to be done.
2674 MODE and WIN are passed so that this macro can use
2675 GO_IF_LEGITIMATE_ADDRESS.
2677 It is always safe for this macro to do nothing. It exists to recognize
2678 opportunities to optimize the output.
2680 For the SH, if X is almost suitable for indexing, but the offset is
2681 out of range, convert it into a normal form so that cse has a chance
2682 of reducing the number of address registers used. */
2684 #define LEGITIMIZE_ADDRESS(X,OLDX,MODE,WIN) \
2687 (X) = legitimize_pic_address (OLDX, MODE, NULL_RTX); \
2688 if (GET_CODE (X) == PLUS \
2689 && (GET_MODE_SIZE (MODE) == 4 \
2690 || GET_MODE_SIZE (MODE) == 8) \
2691 && GET_CODE (XEXP ((X), 1)) == CONST_INT \
2692 && BASE_REGISTER_RTX_P (XEXP ((X), 0)) \
2693 && ! TARGET_SHMEDIA \
2694 && ! (TARGET_SH4 && (MODE) == DFmode) \
2695 && ! (TARGET_SH2E && (MODE) == SFmode)) \
2697 rtx index_rtx = XEXP ((X), 1); \
2698 HOST_WIDE_INT offset = INTVAL (index_rtx), offset_base; \
2701 GO_IF_LEGITIMATE_INDEX ((MODE), index_rtx, WIN); \
2702 /* On rare occasions, we might get an unaligned pointer \
2703 that is indexed in a way to give an aligned address. \
2704 Therefore, keep the lower two bits in offset_base. */ \
2705 /* Instead of offset_base 128..131 use 124..127, so that \
2706 simple add suffices. */ \
2709 offset_base = ((offset + 4) & ~60) - 4; \
2712 offset_base = offset & ~60; \
2713 /* Sometimes the normal form does not suit DImode. We \
2714 could avoid that by using smaller ranges, but that \
2715 would give less optimized code when SImode is \
2717 if (GET_MODE_SIZE (MODE) + offset - offset_base <= 64) \
2719 sum = expand_binop (Pmode, add_optab, XEXP ((X), 0), \
2720 GEN_INT (offset_base), NULL_RTX, 0, \
2723 (X) = gen_rtx_PLUS (Pmode, sum, GEN_INT (offset - offset_base)); \
2729 /* A C compound statement that attempts to replace X, which is an address
2730 that needs reloading, with a valid memory address for an operand of
2731 mode MODE. WIN is a C statement label elsewhere in the code.
2733 Like for LEGITIMIZE_ADDRESS, for the SH we try to get a normal form
2734 of the address. That will allow inheritance of the address reloads. */
2736 #define LEGITIMIZE_RELOAD_ADDRESS(X,MODE,OPNUM,TYPE,IND_LEVELS,WIN) \
2738 if (GET_CODE (X) == PLUS \
2739 && (GET_MODE_SIZE (MODE) == 4 || GET_MODE_SIZE (MODE) == 8) \
2740 && GET_CODE (XEXP (X, 1)) == CONST_INT \
2741 && BASE_REGISTER_RTX_P (XEXP (X, 0)) \
2742 && ! TARGET_SHMEDIA \
2743 && ! (TARGET_SH4 && (MODE) == DFmode) \
2744 && ! ((MODE) == PSImode && (TYPE) == RELOAD_FOR_INPUT_ADDRESS)) \
2746 rtx index_rtx = XEXP (X, 1); \
2747 HOST_WIDE_INT offset = INTVAL (index_rtx), offset_base; \
2750 if (TARGET_SH2E && MODE == SFmode) \
2753 push_reload (index_rtx, NULL_RTX, &XEXP (X, 1), NULL, \
2754 INDEX_REG_CLASS, Pmode, VOIDmode, 0, 0, (OPNUM), \
2758 /* Instead of offset_base 128..131 use 124..127, so that \
2759 simple add suffices. */ \
2762 offset_base = ((offset + 4) & ~60) - 4; \
2765 offset_base = offset & ~60; \
2766 /* Sometimes the normal form does not suit DImode. We \
2767 could avoid that by using smaller ranges, but that \
2768 would give less optimized code when SImode is \
2770 if (GET_MODE_SIZE (MODE) + offset - offset_base <= 64) \
2772 sum = gen_rtx (PLUS, Pmode, XEXP (X, 0), \
2773 GEN_INT (offset_base)); \
2774 X = gen_rtx (PLUS, Pmode, sum, GEN_INT (offset - offset_base));\
2775 push_reload (sum, NULL_RTX, &XEXP (X, 0), NULL, \
2776 BASE_REG_CLASS, Pmode, VOIDmode, 0, 0, (OPNUM), \
2781 /* We must re-recognize what we created before. */ \
2782 else if (GET_CODE (X) == PLUS \
2783 && (GET_MODE_SIZE (MODE) == 4 || GET_MODE_SIZE (MODE) == 8) \
2784 && GET_CODE (XEXP (X, 0)) == PLUS \
2785 && GET_CODE (XEXP (XEXP (X, 0), 1)) == CONST_INT \
2786 && BASE_REGISTER_RTX_P (XEXP (XEXP (X, 0), 0)) \
2787 && GET_CODE (XEXP (X, 1)) == CONST_INT \
2788 && ! TARGET_SHMEDIA \
2789 && ! (TARGET_SH2E && MODE == SFmode)) \
2791 /* Because this address is so complex, we know it must have \
2792 been created by LEGITIMIZE_RELOAD_ADDRESS before; thus, \
2793 it is already unshared, and needs no further unsharing. */ \
2794 push_reload (XEXP ((X), 0), NULL_RTX, &XEXP ((X), 0), NULL, \
2795 BASE_REG_CLASS, Pmode, VOIDmode, 0, 0, (OPNUM), (TYPE));\
2800 /* Go to LABEL if ADDR (a legitimate address expression)
2801 has an effect that depends on the machine mode it is used for.
2803 ??? Strictly speaking, we should also include all indexed addressing,
2804 because the index scale factor is the length of the operand.
2805 However, the impact of GO_IF_MODE_DEPENDENT_ADDRESS would be to
2806 high if we did that. So we rely on reload to fix things up. */
2808 #define GO_IF_MODE_DEPENDENT_ADDRESS(ADDR,LABEL) \
2810 if (GET_CODE(ADDR) == PRE_DEC || GET_CODE(ADDR) == POST_INC) \
2814 /* Specify the machine mode that this machine uses
2815 for the index in the tablejump instruction. */
2816 #define CASE_VECTOR_MODE ((! optimize || TARGET_BIGTABLE) ? SImode : HImode)
2818 #define CASE_VECTOR_SHORTEN_MODE(MIN_OFFSET, MAX_OFFSET, BODY) \
2819 ((MIN_OFFSET) >= 0 && (MAX_OFFSET) <= 127 \
2820 ? (ADDR_DIFF_VEC_FLAGS (BODY).offset_unsigned = 0, QImode) \
2821 : (MIN_OFFSET) >= 0 && (MAX_OFFSET) <= 255 \
2822 ? (ADDR_DIFF_VEC_FLAGS (BODY).offset_unsigned = 1, QImode) \
2823 : (MIN_OFFSET) >= -32768 && (MAX_OFFSET) <= 32767 ? HImode \
2826 /* Define as C expression which evaluates to nonzero if the tablejump
2827 instruction expects the table to contain offsets from the address of the
2829 Do not define this if the table should contain absolute addresses. */
2830 #define CASE_VECTOR_PC_RELATIVE 1
2832 /* Define it here, so that it doesn't get bumped to 64-bits on SHmedia. */
2833 #define FLOAT_TYPE_SIZE 32
2835 /* Since the SH2e has only `float' support, it is desirable to make all
2836 floating point types equivalent to `float'. */
2837 #define DOUBLE_TYPE_SIZE ((TARGET_SH2E && ! TARGET_SH4) ? 32 : 64)
2839 /* 'char' is signed by default. */
2840 #define DEFAULT_SIGNED_CHAR 1
2842 /* The type of size_t unsigned int. */
2843 #define SIZE_TYPE (TARGET_SH5 ? "long unsigned int" : "unsigned int")
2846 #define PTRDIFF_TYPE (TARGET_SH5 ? "long int" : "int")
2848 #define WCHAR_TYPE "short unsigned int"
2849 #define WCHAR_TYPE_SIZE 16
2851 #define SH_ELF_WCHAR_TYPE "long int"
2853 /* Don't cse the address of the function being compiled. */
2854 /*#define NO_RECURSIVE_FUNCTION_CSE 1*/
2856 /* Max number of bytes we can move from memory to memory
2857 in one reasonably fast instruction. */
2858 #define MOVE_MAX (TARGET_SHMEDIA ? 8 : 4)
2860 /* Maximum value possibly taken by MOVE_MAX. Must be defined whenever
2861 MOVE_MAX is not a compile-time constant. */
2862 #define MAX_MOVE_MAX 8
2864 /* Max number of bytes we want move_by_pieces to be able to copy
2866 #define MOVE_MAX_PIECES (TARGET_SH4 || TARGET_SHMEDIA ? 8 : 4)
2868 /* Define if operations between registers always perform the operation
2869 on the full register even if a narrower mode is specified. */
2870 #define WORD_REGISTER_OPERATIONS
2872 /* Define if loading in MODE, an integral mode narrower than BITS_PER_WORD
2873 will either zero-extend or sign-extend. The value of this macro should
2874 be the code that says which one of the two operations is implicitly
2875 done, NIL if none. */
2876 /* For SHmedia, we can truncate to QImode easier using zero extension. */
2877 /* FP registers can load SImode values, but don't implicitly sign-extend
2879 #define LOAD_EXTEND_OP(MODE) \
2880 (((MODE) == QImode && TARGET_SHMEDIA) ? ZERO_EXTEND \
2881 : (MODE) != SImode ? SIGN_EXTEND : NIL)
2883 /* Define if loading short immediate values into registers sign extends. */
2884 #define SHORT_IMMEDIATES_SIGN_EXTEND
2886 /* Nonzero if access to memory by bytes is no faster than for words. */
2887 #define SLOW_BYTE_ACCESS 1
2889 /* Immediate shift counts are truncated by the output routines (or was it
2890 the assembler?). Shift counts in a register are truncated by SH. Note
2891 that the native compiler puts too large (> 32) immediate shift counts
2892 into a register and shifts by the register, letting the SH decide what
2893 to do instead of doing that itself. */
2894 /* ??? The library routines in lib1funcs.asm truncate the shift count.
2895 However, the SH3 has hardware shifts that do not truncate exactly as gcc
2896 expects - the sign bit is significant - so it appears that we need to
2897 leave this zero for correct SH3 code. */
2898 #define SHIFT_COUNT_TRUNCATED (! TARGET_SH3)
2900 /* All integers have the same format so truncation is easy. */
2901 #define TRULY_NOOP_TRUNCATION(OUTPREC,INPREC) 1
2903 /* Define this if addresses of constant functions
2904 shouldn't be put through pseudo regs where they can be cse'd.
2905 Desirable on machines where ordinary constants are expensive
2906 but a CALL with constant address is cheap. */
2907 /*#define NO_FUNCTION_CSE 1*/
2909 /* Chars and shorts should be passed as ints. */
2910 #define PROMOTE_PROTOTYPES 1
2912 /* The machine modes of pointers and functions. */
2913 #define Pmode (TARGET_SHMEDIA64 ? DImode : SImode)
2914 #define FUNCTION_MODE Pmode
2916 /* The multiply insn on the SH1 and the divide insns on the SH1 and SH2
2917 are actually function calls with some special constraints on arguments
2920 These macros tell reorg that the references to arguments and
2921 register clobbers for insns of type sfunc do not appear to happen
2922 until after the millicode call. This allows reorg to put insns
2923 which set the argument registers into the delay slot of the millicode
2924 call -- thus they act more like traditional CALL_INSNs.
2926 get_attr_is_sfunc will try to recognize the given insn, so make sure to
2927 filter out things it will not accept -- SEQUENCE, USE and CLOBBER insns
2930 #define INSN_SETS_ARE_DELAYED(X) \
2931 ((GET_CODE (X) == INSN \
2932 && GET_CODE (PATTERN (X)) != SEQUENCE \
2933 && GET_CODE (PATTERN (X)) != USE \
2934 && GET_CODE (PATTERN (X)) != CLOBBER \
2935 && get_attr_is_sfunc (X)))
2937 #define INSN_REFERENCES_ARE_DELAYED(X) \
2938 ((GET_CODE (X) == INSN \
2939 && GET_CODE (PATTERN (X)) != SEQUENCE \
2940 && GET_CODE (PATTERN (X)) != USE \
2941 && GET_CODE (PATTERN (X)) != CLOBBER \
2942 && get_attr_is_sfunc (X)))
2945 /* Position Independent Code. */
2947 /* We can't directly access anything that contains a symbol,
2948 nor can we indirect via the constant pool. */
2949 #define LEGITIMATE_PIC_OPERAND_P(X) \
2950 ((! nonpic_symbol_mentioned_p (X) \
2951 && (GET_CODE (X) != SYMBOL_REF \
2952 || ! CONSTANT_POOL_ADDRESS_P (X) \
2953 || ! nonpic_symbol_mentioned_p (get_pool_constant (X)))) \
2954 || (TARGET_SHMEDIA && GET_CODE (X) == LABEL_REF))
2956 #define SYMBOLIC_CONST_P(X) \
2957 ((GET_CODE (X) == SYMBOL_REF || GET_CODE (X) == LABEL_REF) \
2958 && nonpic_symbol_mentioned_p (X))
2960 /* Compute extra cost of moving data between one register class
2963 /* If SECONDARY*_RELOAD_CLASS says something about the src/dst pair, regclass
2964 uses this information. Hence, the general register <-> floating point
2965 register information here is not used for SFmode. */
2967 #define REGCLASS_HAS_GENERAL_REG(CLASS) \
2968 ((CLASS) == GENERAL_REGS || (CLASS) == R0_REGS \
2969 || (! TARGET_SHMEDIA && (CLASS) == SIBCALL_REGS))
2971 #define REGCLASS_HAS_FP_REG(CLASS) \
2972 ((CLASS) == FP0_REGS || (CLASS) == FP_REGS \
2973 || (CLASS) == DF_REGS || (CLASS) == DF_HI_REGS)
2975 #define REGISTER_MOVE_COST(MODE, SRCCLASS, DSTCLASS) \
2976 sh_register_move_cost ((MODE), (SRCCLASS), (DSTCLASS))
2978 /* ??? Perhaps make MEMORY_MOVE_COST depend on compiler option? This
2979 would be so that people with slow memory systems could generate
2980 different code that does fewer memory accesses. */
2982 /* A C expression for the cost of a branch instruction. A value of 1
2983 is the default; other values are interpreted relative to that.
2984 The SH1 does not have delay slots, hence we get a pipeline stall
2985 at every branch. The SH4 is superscalar, so the single delay slot
2986 is not sufficient to keep both pipelines filled. */
2987 #define BRANCH_COST (TARGET_SH5 ? 1 : ! TARGET_SH2 || TARGET_HARD_SH4 ? 2 : 1)
2989 /* Assembler output control. */
2991 /* A C string constant describing how to begin a comment in the target
2992 assembler language. The compiler assumes that the comment will end at
2993 the end of the line. */
2994 #define ASM_COMMENT_START "!"
2996 #define ASM_APP_ON ""
2997 #define ASM_APP_OFF ""
2998 #define FILE_ASM_OP "\t.file\n"
2999 #define SET_ASM_OP "\t.set\t"
3001 /* How to change between sections. */
3003 #define TEXT_SECTION_ASM_OP (TARGET_SHMEDIA32 ? "\t.section\t.text..SHmedia32,\"ax\"" : "\t.text")
3004 #define DATA_SECTION_ASM_OP "\t.data"
3006 #if defined CRT_BEGIN || defined CRT_END
3007 /* Arrange for TEXT_SECTION_ASM_OP to be a compile-time constant. */
3008 # undef TEXT_SECTION_ASM_OP
3009 # if __SHMEDIA__ == 1 && __SH5__ == 32
3010 # define TEXT_SECTION_ASM_OP "\t.section\t.text..SHmedia32,\"ax\""
3012 # define TEXT_SECTION_ASM_OP "\t.text"
3017 /* If defined, a C expression whose value is a string containing the
3018 assembler operation to identify the following data as
3019 uninitialized global data. If not defined, and neither
3020 `ASM_OUTPUT_BSS' nor `ASM_OUTPUT_ALIGNED_BSS' are defined,
3021 uninitialized global data will be output in the data section if
3022 `-fno-common' is passed, otherwise `ASM_OUTPUT_COMMON' will be
3024 #ifndef BSS_SECTION_ASM_OP
3025 #define BSS_SECTION_ASM_OP "\t.section\t.bss"
3028 /* Like `ASM_OUTPUT_BSS' except takes the required alignment as a
3029 separate, explicit argument. If you define this macro, it is used
3030 in place of `ASM_OUTPUT_BSS', and gives you more flexibility in
3031 handling the required alignment of the variable. The alignment is
3032 specified as the number of bits.
3034 Try to use function `asm_output_aligned_bss' defined in file
3035 `varasm.c' when defining this macro. */
3036 #ifndef ASM_OUTPUT_ALIGNED_BSS
3037 #define ASM_OUTPUT_ALIGNED_BSS(FILE, DECL, NAME, SIZE, ALIGN) \
3038 asm_output_aligned_bss (FILE, DECL, NAME, SIZE, ALIGN)
3041 /* Define this so that jump tables go in same section as the current function,
3042 which could be text or it could be a user defined section. */
3043 #define JUMP_TABLES_IN_TEXT_SECTION 1
3045 #undef DO_GLOBAL_CTORS_BODY
3046 #define DO_GLOBAL_CTORS_BODY \
3048 typedef (*pfunc)(); \
3049 extern pfunc __ctors[]; \
3050 extern pfunc __ctors_end[]; \
3052 for (p = __ctors_end; p > __ctors; ) \
3058 #undef DO_GLOBAL_DTORS_BODY
3059 #define DO_GLOBAL_DTORS_BODY \
3061 typedef (*pfunc)(); \
3062 extern pfunc __dtors[]; \
3063 extern pfunc __dtors_end[]; \
3065 for (p = __dtors; p < __dtors_end; p++) \
3071 #define ASM_OUTPUT_REG_PUSH(file, v) \
3072 fprintf ((file), "\tmov.l\tr%d,@-r15\n", (v));
3074 #define ASM_OUTPUT_REG_POP(file, v) \
3075 fprintf ((file), "\tmov.l\t@r15+,r%d\n", (v));
3077 /* DBX register number for a given compiler register number. */
3078 /* GDB has FPUL at 23 and FP0 at 25, so we must add one to all FP registers
3080 /* svr4.h undefines this macro, yet we really want to use the same numbers
3081 for coff as for elf, so we go via another macro: SH_DBX_REGISTER_NUMBER. */
3082 /* expand_builtin_init_dwarf_reg_sizes uses this to test if a
3083 register exists, so we should return -1 for invalid register numbers. */
3084 #define DBX_REGISTER_NUMBER(REGNO) SH_DBX_REGISTER_NUMBER (REGNO)
3086 #define SH_DBX_REGISTER_NUMBER(REGNO) \
3087 (GENERAL_REGISTER_P (REGNO) \
3088 ? ((REGNO) - FIRST_GENERAL_REG) \
3089 : FP_REGISTER_P (REGNO) \
3090 ? ((REGNO) - FIRST_FP_REG + (TARGET_SH5 ? (TARGET_SHCOMPACT ? 245 \
3092 : XD_REGISTER_P (REGNO) \
3093 ? ((REGNO) - FIRST_XD_REG + (TARGET_SH5 ? 289 : 87)) \
3094 : TARGET_REGISTER_P (REGNO) \
3095 ? ((REGNO) - FIRST_TARGET_REG + 68) \
3096 : (REGNO) == PR_REG \
3097 ? (TARGET_SH5 ? 241 : 17) \
3098 : (REGNO) == PR_MEDIA_REG \
3099 ? (TARGET_SH5 ? 18 : -1) \
3100 : (REGNO) == T_REG \
3101 ? (TARGET_SH5 ? 242 : 18) \
3102 : (REGNO) == GBR_REG \
3103 ? (TARGET_SH5 ? 238 : 19) \
3104 : (REGNO) == MACH_REG \
3105 ? (TARGET_SH5 ? 239 : 20) \
3106 : (REGNO) == MACL_REG \
3107 ? (TARGET_SH5 ? 240 : 21) \
3108 : (REGNO) == FPUL_REG \
3109 ? (TARGET_SH5 ? 244 : 23) \
3112 /* This is how to output a reference to a symbol_ref. On SH5,
3113 references to non-code symbols must be preceded by `datalabel'. */
3114 #define ASM_OUTPUT_SYMBOL_REF(FILE,SYM) \
3117 if (TARGET_SH5 && !SYMBOL_REF_FUNCTION_P (SYM)) \
3118 fputs ("datalabel ", (FILE)); \
3119 assemble_name ((FILE), XSTR ((SYM), 0)); \
3123 /* This is how to output an assembler line
3124 that says to advance the location counter
3125 to a multiple of 2**LOG bytes. */
3127 #define ASM_OUTPUT_ALIGN(FILE,LOG) \
3129 fprintf ((FILE), "\t.align %d\n", (LOG))
3131 /* Globalizing directive for a label. */
3132 #define GLOBAL_ASM_OP "\t.global\t"
3134 /* #define ASM_OUTPUT_CASE_END(STREAM,NUM,TABLE) */
3136 /* Output a relative address table. */
3138 #define ASM_OUTPUT_ADDR_DIFF_ELT(STREAM,BODY,VALUE,REL) \
3139 switch (GET_MODE (BODY)) \
3144 asm_fprintf ((STREAM), "\t.long\t%LL%d-datalabel %LL%d\n", \
3148 asm_fprintf ((STREAM), "\t.long\t%LL%d-%LL%d\n", (VALUE),(REL)); \
3153 asm_fprintf ((STREAM), "\t.word\t%LL%d-datalabel %LL%d\n", \
3157 asm_fprintf ((STREAM), "\t.word\t%LL%d-%LL%d\n", (VALUE),(REL)); \
3162 asm_fprintf ((STREAM), "\t.byte\t%LL%d-datalabel %LL%d\n", \
3166 asm_fprintf ((STREAM), "\t.byte\t%LL%d-%LL%d\n", (VALUE),(REL)); \
3172 /* Output an absolute table element. */
3174 #define ASM_OUTPUT_ADDR_VEC_ELT(STREAM,VALUE) \
3175 if (! optimize || TARGET_BIGTABLE) \
3176 asm_fprintf ((STREAM), "\t.long\t%LL%d\n", (VALUE)); \
3178 asm_fprintf ((STREAM), "\t.word\t%LL%d\n", (VALUE));
3181 /* A C statement to be executed just prior to the output of
3182 assembler code for INSN, to modify the extracted operands so
3183 they will be output differently.
3185 Here the argument OPVEC is the vector containing the operands
3186 extracted from INSN, and NOPERANDS is the number of elements of
3187 the vector which contain meaningful data for this insn.
3188 The contents of this vector are what will be used to convert the insn
3189 template into assembler code, so you can change the assembler output
3190 by changing the contents of the vector. */
3192 #define FINAL_PRESCAN_INSN(INSN, OPVEC, NOPERANDS) \
3193 final_prescan_insn ((INSN), (OPVEC), (NOPERANDS))
3195 /* Print operand X (an rtx) in assembler syntax to file FILE.
3196 CODE is a letter or dot (`z' in `%z0') or 0 if no letter was specified.
3197 For `%' followed by punctuation, CODE is the punctuation and X is null. */
3199 #define PRINT_OPERAND(STREAM, X, CODE) print_operand ((STREAM), (X), (CODE))
3201 /* Print a memory address as an operand to reference that memory location. */
3203 #define PRINT_OPERAND_ADDRESS(STREAM,X) print_operand_address ((STREAM), (X))
3205 #define PRINT_OPERAND_PUNCT_VALID_P(CHAR) \
3206 ((CHAR) == '.' || (CHAR) == '#' || (CHAR) == '@' || (CHAR) == ',' \
3207 || (CHAR) == '$'|| (CHAR) == '\'')
3209 /* Recognize machine-specific patterns that may appear within
3210 constants. Used for PIC-specific UNSPECs. */
3211 #define OUTPUT_ADDR_CONST_EXTRA(STREAM, X, FAIL) \
3213 if (GET_CODE (X) == UNSPEC && XVECLEN ((X), 0) == 1) \
3215 switch (XINT ((X), 1)) \
3217 case UNSPEC_DATALABEL: \
3218 fputs ("datalabel ", (STREAM)); \
3219 output_addr_const ((STREAM), XVECEXP ((X), 0, 0)); \
3222 /* GLOBAL_OFFSET_TABLE or local symbols, no suffix. */ \
3223 output_addr_const ((STREAM), XVECEXP ((X), 0, 0)); \
3226 output_addr_const ((STREAM), XVECEXP ((X), 0, 0)); \
3227 fputs ("@GOT", (STREAM)); \
3229 case UNSPEC_GOTOFF: \
3230 output_addr_const ((STREAM), XVECEXP ((X), 0, 0)); \
3231 fputs ("@GOTOFF", (STREAM)); \
3234 output_addr_const ((STREAM), XVECEXP ((X), 0, 0)); \
3235 fputs ("@PLT", (STREAM)); \
3237 case UNSPEC_GOTPLT: \
3238 output_addr_const ((STREAM), XVECEXP ((X), 0, 0)); \
3239 fputs ("@GOTPLT", (STREAM)); \
3241 case UNSPEC_DTPOFF: \
3242 output_addr_const ((STREAM), XVECEXP ((X), 0, 0)); \
3243 fputs ("@DTPOFF", (STREAM)); \
3245 case UNSPEC_GOTTPOFF: \
3246 output_addr_const ((STREAM), XVECEXP ((X), 0, 0)); \
3247 fputs ("@GOTTPOFF", (STREAM)); \
3249 case UNSPEC_TPOFF: \
3250 output_addr_const ((STREAM), XVECEXP ((X), 0, 0)); \
3251 fputs ("@TPOFF", (STREAM)); \
3253 case UNSPEC_CALLER: \
3256 /* LPCS stands for Label for PIC Call Site. */ \
3257 ASM_GENERATE_INTERNAL_LABEL \
3258 (name, "LPCS", INTVAL (XVECEXP ((X), 0, 0))); \
3259 assemble_name ((STREAM), name); \
3272 extern struct rtx_def *sh_compare_op0;
3273 extern struct rtx_def *sh_compare_op1;
3275 /* Which processor to schedule for. The elements of the enumeration must
3276 match exactly the cpu attribute in the sh.md file. */
3278 enum processor_type {
3288 #define sh_cpu_attr ((enum attr_cpu)sh_cpu)
3289 extern enum processor_type sh_cpu;
3291 extern int optimize; /* needed for gen_casesi. */
3293 enum mdep_reorg_phase_e
3295 SH_BEFORE_MDEP_REORG,
3296 SH_INSERT_USES_LABELS,
3297 SH_SHORTEN_BRANCHES0,
3299 SH_SHORTEN_BRANCHES1,
3303 extern enum mdep_reorg_phase_e mdep_reorg_phase;
3305 /* Generate calls to memcpy, memcmp and memset. */
3307 #define TARGET_MEM_FUNCTIONS
3309 /* Handle Renesas compiler's pragmas. */
3310 #define REGISTER_TARGET_PRAGMAS() do { \
3311 c_register_pragma (0, "interrupt", sh_pr_interrupt); \
3312 c_register_pragma (0, "trapa", sh_pr_trapa); \
3313 c_register_pragma (0, "nosave_low_regs", sh_pr_nosave_low_regs); \
3316 /* Set when processing a function with pragma interrupt turned on. */
3318 extern int pragma_interrupt;
3320 /* Set when processing a function with interrupt attribute. */
3322 extern int current_function_interrupt;
3324 /* Set to an RTX containing the address of the stack to switch to
3325 for interrupt functions. */
3326 extern struct rtx_def *sp_switch;
3328 extern int rtx_equal_function_value_matters;
3331 /* Instructions with unfilled delay slots take up an
3332 extra two bytes for the nop in the delay slot.
3333 sh-dsp parallel processing insns are four bytes long. */
3335 #define ADJUST_INSN_LENGTH(X, LENGTH) \
3336 (LENGTH) += sh_insn_length_adjustment (X);
3338 /* Define the codes that are matched by predicates in sh.c. */
3339 #define PREDICATE_CODES \
3340 {"and_operand", {SUBREG, REG, CONST_INT}}, \
3341 {"any_register_operand", {SUBREG, REG}}, \
3342 {"arith_operand", {SUBREG, REG, CONST_INT}}, \
3343 {"arith_reg_dest", {SUBREG, REG}}, \
3344 {"arith_reg_operand", {SUBREG, REG}}, \
3345 {"arith_reg_or_0_operand", {SUBREG, REG, CONST_INT, CONST_VECTOR}}, \
3346 {"binary_float_operator", {PLUS, MINUS, MULT, DIV}}, \
3347 {"binary_logical_operator", {AND, IOR, XOR}}, \
3348 {"commutative_float_operator", {PLUS, MULT}}, \
3349 {"equality_comparison_operator", {EQ,NE}}, \
3350 {"extend_reg_operand", {SUBREG, REG, TRUNCATE}}, \
3351 {"extend_reg_or_0_operand", {SUBREG, REG, TRUNCATE, CONST_INT}}, \
3352 {"fp_arith_reg_operand", {SUBREG, REG}}, \
3353 {"fpscr_operand", {REG}}, \
3354 {"fpul_operand", {REG}}, \
3355 {"general_extend_operand", {SUBREG, REG, MEM, TRUNCATE}}, \
3356 {"general_movsrc_operand", {SUBREG, REG, CONST_INT, CONST_DOUBLE, MEM}}, \
3357 {"general_movdst_operand", {SUBREG, REG, MEM}}, \
3358 {"greater_comparison_operator", {GT,GE,GTU,GEU}}, \
3359 {"int_gpr_dest", {SUBREG, REG}}, \
3360 {"inqhi_operand", {TRUNCATE}}, \
3361 {"less_comparison_operator", {LT,LE,LTU,LEU}}, \
3362 {"logical_operand", {SUBREG, REG, CONST_INT}}, \
3363 {"mextr_bit_offset", {CONST_INT}}, \
3364 {"noncommutative_float_operator", {MINUS, DIV}}, \
3365 {"shmedia_6bit_operand", {SUBREG, REG, CONST_INT}}, \
3366 {"sh_register_operand", {REG, SUBREG, CONST_INT}}, \
3367 {"target_reg_operand", {SUBREG, REG}}, \
3368 {"target_operand", {SUBREG, REG, LABEL_REF, SYMBOL_REF, CONST, UNSPEC}},\
3369 {"trunc_hi_operand", {SUBREG, REG, TRUNCATE}}, \
3370 {"register_operand", {SUBREG, REG}}, \
3371 {"sh_const_vec", {CONST_VECTOR}}, \
3372 {"sh_1el_vec", {CONST_VECTOR, PARALLEL}}, \
3373 {"sh_rep_vec", {CONST_VECTOR, PARALLEL}}, \
3374 {"symbol_ref_operand", {SYMBOL_REF}}, \
3375 {"unary_float_operator", {ABS, NEG, SQRT}}, \
3377 #define SPECIAL_MODE_PREDICATES \
3378 "any_register_operand", \
3380 "trunc_hi_operand", \
3381 /* This line intentionally left blank. */
3383 #define any_register_operand register_operand
3385 /* Define this macro if it is advisable to hold scalars in registers
3386 in a wider mode than that declared by the program. In such cases,
3387 the value is constrained to be within the bounds of the declared
3388 type, but kept valid in the wider mode. The signedness of the
3389 extension may differ from that of the type.
3391 Leaving the unsignedp unchanged gives better code than always setting it
3392 to 0. This is despite the fact that we have only signed char and short
3393 load instructions. */
3394 #define PROMOTE_MODE(MODE, UNSIGNEDP, TYPE) \
3395 if (GET_MODE_CLASS (MODE) == MODE_INT \
3396 && GET_MODE_SIZE (MODE) < UNITS_PER_WORD) \
3397 (UNSIGNEDP) = ((MODE) == SImode ? 0 : (UNSIGNEDP)), \
3398 (MODE) = (TARGET_SH1 ? SImode : DImode);
3400 /* Defining PROMOTE_FUNCTION_ARGS eliminates some unnecessary zero/sign
3401 extensions applied to char/short functions arguments. Defining
3402 PROMOTE_FUNCTION_RETURN does the same for function returns. */
3404 #define PROMOTE_FUNCTION_ARGS
3405 #define PROMOTE_FUNCTION_RETURN
3407 #define MAX_FIXED_MODE_SIZE (TARGET_SH5 ? 128 : 64)
3409 /* ??? Define ACCUMULATE_OUTGOING_ARGS? This is more efficient than pushing
3410 and poping arguments. However, we do have push/pop instructions, and
3411 rather limited offsets (4 bits) in load/store instructions, so it isn't
3412 clear if this would give better code. If implemented, should check for
3413 compatibility problems. */
3415 #define SH_DYNAMIC_SHIFT_COST \
3416 (TARGET_HARD_SH4 ? 1 : TARGET_SH3 ? (TARGET_SMALLCODE ? 1 : 2) : 20)
3419 #define NUM_MODES_FOR_MODE_SWITCHING { FP_MODE_NONE }
3421 #define OPTIMIZE_MODE_SWITCHING(ENTITY) TARGET_SH4
3423 #define ACTUAL_NORMAL_MODE(ENTITY) \
3424 (TARGET_FPU_SINGLE ? FP_MODE_SINGLE : FP_MODE_DOUBLE)
3426 #define NORMAL_MODE(ENTITY) \
3427 (sh_cfun_interrupt_handler_p () \
3428 ? (TARGET_FMOVD ? FP_MODE_DOUBLE : FP_MODE_NONE) \
3429 : ACTUAL_NORMAL_MODE (ENTITY))
3431 #define EPILOGUE_USES(REGNO) ((TARGET_SH2E || TARGET_SH4) \
3432 && (REGNO) == FPSCR_REG)
3434 #define MODE_NEEDED(ENTITY, INSN) \
3435 (recog_memoized (INSN) >= 0 \
3436 ? get_attr_fp_mode (INSN) \
3439 #define MODE_PRIORITY_TO_MODE(ENTITY, N) \
3440 ((TARGET_FPU_SINGLE != 0) ^ (N) ? FP_MODE_SINGLE : FP_MODE_DOUBLE)
3442 #define EMIT_MODE_SET(ENTITY, MODE, HARD_REGS_LIVE) \
3443 fpscr_set_from_mem ((MODE), (HARD_REGS_LIVE))
3445 #define MD_CAN_REDIRECT_BRANCH(INSN, SEQ) \
3446 sh_can_redirect_branch ((INSN), (SEQ))
3448 #define DWARF_FRAME_RETURN_COLUMN \
3449 (TARGET_SH5 ? DWARF_FRAME_REGNUM (PR_MEDIA_REG) : DWARF_FRAME_REGNUM (PR_REG))
3451 #define EH_RETURN_DATA_REGNO(N) \
3452 ((N) < 4 ? (N) + (TARGET_SH5 ? 2 : 4) : INVALID_REGNUM)
3454 #define EH_RETURN_STACKADJ_RTX gen_rtx_REG (Pmode, STATIC_CHAIN_REGNUM)
3456 #if (defined CRT_BEGIN || defined CRT_END) && ! __SHMEDIA__
3457 /* SH constant pool breaks the devices in crtstuff.c to control section
3458 in where code resides. We have to write it as asm code. */
3459 #define CRT_CALL_STATIC_FUNCTION(SECTION_OP, FUNC) \
3460 asm (SECTION_OP "\n\
3466 1: .long " USER_LABEL_PREFIX #FUNC " - 0b\n\
3467 2:\n" TEXT_SECTION_ASM_OP);
3468 #endif /* (defined CRT_BEGIN || defined CRT_END) && ! __SHMEDIA__ */
3470 #define ALLOCATE_INITIAL_VALUE(hard_reg) \
3471 (REGNO (hard_reg) == (TARGET_SH5 ? PR_MEDIA_REG : PR_REG) \
3472 ? (current_function_is_leaf && ! sh_pr_n_sets () \
3474 : gen_rtx_MEM (Pmode, TARGET_SH5 \
3475 ? (plus_constant (arg_pointer_rtx, \
3476 TARGET_SHMEDIA64 ? -8 : -4)) \
3477 : frame_pointer_rtx)) \
3480 #endif /* ! GCC_SH_H */