1 /* Definitions of target machine for GNU compiler, for IBM RS/6000.
2 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
3 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009,
5 Free Software Foundation, Inc.
6 Contributed by Richard Kenner (kenner@vlsi1.ultra.nyu.edu)
8 This file is part of GCC.
10 GCC is free software; you can redistribute it and/or modify it
11 under the terms of the GNU General Public License as published
12 by the Free Software Foundation; either version 3, or (at your
13 option) any later version.
15 GCC is distributed in the hope that it will be useful, but WITHOUT
16 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
17 or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
18 License for more details.
20 Under Section 7 of GPL version 3, you are granted additional
21 permissions described in the GCC Runtime Library Exception, version
22 3.1, as published by the Free Software Foundation.
24 You should have received a copy of the GNU General Public License and
25 a copy of the GCC Runtime Library Exception along with this program;
26 see the files COPYING3 and COPYING.RUNTIME respectively. If not, see
27 <http://www.gnu.org/licenses/>. */
29 /* Note that some other tm.h files include this one and then override
30 many of the definitions. */
33 #include "config/rs6000/rs6000-opts.h"
36 /* Definitions for the object file format. These are set at
39 #define OBJECT_XCOFF 1
42 #define OBJECT_MACHO 4
44 #define TARGET_ELF (TARGET_OBJECT_FORMAT == OBJECT_ELF)
45 #define TARGET_XCOFF (TARGET_OBJECT_FORMAT == OBJECT_XCOFF)
46 #define TARGET_MACOS (TARGET_OBJECT_FORMAT == OBJECT_PEF)
47 #define TARGET_MACHO (TARGET_OBJECT_FORMAT == OBJECT_MACHO)
54 #define TARGET_AIX_OS 0
57 /* Control whether function entry points use a "dot" symbol when
61 /* Default string to use for cpu if not specified. */
62 #ifndef TARGET_CPU_DEFAULT
63 #define TARGET_CPU_DEFAULT ((char *)0)
66 /* If configured for PPC405, support PPC405CR Erratum77. */
67 #ifdef CONFIG_PPC405CR
68 #define PPC405_ERRATUM77 (rs6000_cpu == PROCESSOR_PPC405)
70 #define PPC405_ERRATUM77 0
73 #ifndef TARGET_PAIRED_FLOAT
74 #define TARGET_PAIRED_FLOAT 0
77 #ifdef HAVE_AS_POPCNTB
78 #define ASM_CPU_POWER5_SPEC "-mpower5"
80 #define ASM_CPU_POWER5_SPEC "-mpower4"
84 #define ASM_CPU_POWER6_SPEC "-mpower6 -maltivec"
86 #define ASM_CPU_POWER6_SPEC "-mpower4 -maltivec"
89 #ifdef HAVE_AS_POPCNTD
90 #define ASM_CPU_POWER7_SPEC "-mpower7"
92 #define ASM_CPU_POWER7_SPEC "-mpower4 -maltivec"
96 #define ASM_CPU_476_SPEC "-m476"
98 #define ASM_CPU_476_SPEC "-mpower4"
101 /* Common ASM definitions used by ASM_SPEC among the various targets for
102 handling -mcpu=xxx switches. There is a parallel list in driver-rs6000.c to
103 provide the default assembler options if the user uses -mcpu=native, so if
104 you make changes here, make them also there. */
105 #define ASM_CPU_SPEC \
107 %{mpower: %{!mpower2: -mpwr}} \
109 %{mpowerpc64*: -mppc64} \
110 %{!mpowerpc64*: %{mpowerpc*: -mppc}} \
111 %{mno-power: %{!mpowerpc*: -mcom}} \
112 %{!mno-power: %{!mpower*: %(asm_default)}}} \
113 %{mcpu=native: %(asm_cpu_native)} \
114 %{mcpu=common: -mcom} \
115 %{mcpu=cell: -mcell} \
116 %{mcpu=power: -mpwr} \
117 %{mcpu=power2: -mpwrx} \
118 %{mcpu=power3: -mppc64} \
119 %{mcpu=power4: -mpower4} \
120 %{mcpu=power5: %(asm_cpu_power5)} \
121 %{mcpu=power5+: %(asm_cpu_power5)} \
122 %{mcpu=power6: %(asm_cpu_power6) -maltivec} \
123 %{mcpu=power6x: %(asm_cpu_power6) -maltivec} \
124 %{mcpu=power7: %(asm_cpu_power7)} \
126 %{mcpu=powerpc: -mppc} \
127 %{mcpu=rios: -mpwr} \
128 %{mcpu=rios1: -mpwr} \
129 %{mcpu=rios2: -mpwrx} \
131 %{mcpu=rsc1: -mpwr} \
132 %{mcpu=rs64a: -mppc64} \
136 %{mcpu=405fp: -m405} \
138 %{mcpu=440fp: -m440} \
140 %{mcpu=464fp: -m440} \
141 %{mcpu=476: %(asm_cpu_476)} \
142 %{mcpu=476fp: %(asm_cpu_476)} \
147 %{mcpu=603e: -mppc} \
148 %{mcpu=ec603e: -mppc} \
150 %{mcpu=604e: -mppc} \
151 %{mcpu=620: -mppc64} \
152 %{mcpu=630: -mppc64} \
156 %{mcpu=7400: -mppc -maltivec} \
157 %{mcpu=7450: -mppc -maltivec} \
158 %{mcpu=G4: -mppc -maltivec} \
163 %{mcpu=970: -mpower4 -maltivec} \
164 %{mcpu=G5: -mpower4 -maltivec} \
165 %{mcpu=8540: -me500} \
166 %{mcpu=8548: -me500} \
167 %{mcpu=e300c2: -me300} \
168 %{mcpu=e300c3: -me300} \
169 %{mcpu=e500mc: -me500mc} \
170 %{mcpu=e500mc64: -me500mc64} \
171 %{maltivec: -maltivec} \
172 %{mvsx: -mvsx %{!maltivec: -maltivec} %{!mcpu*: %(asm_cpu_power7)}} \
175 #define CPP_DEFAULT_SPEC ""
177 #define ASM_DEFAULT_SPEC ""
179 /* This macro defines names of additional specifications to put in the specs
180 that can be used in various specifications like CC1_SPEC. Its definition
181 is an initializer with a subgrouping for each command option.
183 Each subgrouping contains a string constant, that defines the
184 specification name, and a string constant that used by the GCC driver
187 Do not define this macro if it does not need to do anything. */
189 #define SUBTARGET_EXTRA_SPECS
191 #define EXTRA_SPECS \
192 { "cpp_default", CPP_DEFAULT_SPEC }, \
193 { "asm_cpu", ASM_CPU_SPEC }, \
194 { "asm_cpu_native", ASM_CPU_NATIVE_SPEC }, \
195 { "asm_default", ASM_DEFAULT_SPEC }, \
196 { "cc1_cpu", CC1_CPU_SPEC }, \
197 { "asm_cpu_power5", ASM_CPU_POWER5_SPEC }, \
198 { "asm_cpu_power6", ASM_CPU_POWER6_SPEC }, \
199 { "asm_cpu_power7", ASM_CPU_POWER7_SPEC }, \
200 { "asm_cpu_476", ASM_CPU_476_SPEC }, \
201 SUBTARGET_EXTRA_SPECS
203 /* -mcpu=native handling only makes sense with compiler running on
204 an PowerPC chip. If changing this condition, also change
205 the condition in driver-rs6000.c. */
206 #if defined(__powerpc__) || defined(__POWERPC__) || defined(_AIX)
207 /* In driver-rs6000.c. */
208 extern const char *host_detect_local_cpu (int argc, const char **argv);
209 #define EXTRA_SPEC_FUNCTIONS \
210 { "local_cpu_detect", host_detect_local_cpu },
211 #define HAVE_LOCAL_CPU_DETECT
212 #define ASM_CPU_NATIVE_SPEC "%:local_cpu_detect(asm)"
215 #define ASM_CPU_NATIVE_SPEC "%(asm_default)"
219 #ifdef HAVE_LOCAL_CPU_DETECT
220 #define CC1_CPU_SPEC \
221 "%{mcpu=native:%<mcpu=native %:local_cpu_detect(cpu)} \
222 %{mtune=native:%<mtune=native %:local_cpu_detect(tune)}"
224 #define CC1_CPU_SPEC ""
228 /* Architecture type. */
230 /* Define TARGET_MFCRF if the target assembler does not support the
231 optional field operand for mfcr. */
233 #ifndef HAVE_AS_MFCRF
235 #define TARGET_MFCRF 0
238 /* Define TARGET_POPCNTB if the target assembler does not support the
239 popcount byte instruction. */
241 #ifndef HAVE_AS_POPCNTB
242 #undef TARGET_POPCNTB
243 #define TARGET_POPCNTB 0
246 /* Define TARGET_FPRND if the target assembler does not support the
247 fp rounding instructions. */
249 #ifndef HAVE_AS_FPRND
251 #define TARGET_FPRND 0
254 /* Define TARGET_CMPB if the target assembler does not support the
259 #define TARGET_CMPB 0
262 /* Define TARGET_MFPGPR if the target assembler does not support the
263 mffpr and mftgpr instructions. */
265 #ifndef HAVE_AS_MFPGPR
267 #define TARGET_MFPGPR 0
270 /* Define TARGET_DFP if the target assembler does not support decimal
271 floating point instructions. */
277 /* Define TARGET_POPCNTD if the target assembler does not support the
278 popcount word and double word instructions. */
280 #ifndef HAVE_AS_POPCNTD
281 #undef TARGET_POPCNTD
282 #define TARGET_POPCNTD 0
285 /* Define TARGET_LWSYNC_INSTRUCTION if the assembler knows about lwsync. If
286 not, generate the lwsync code as an integer constant. */
287 #ifdef HAVE_AS_LWSYNC
288 #define TARGET_LWSYNC_INSTRUCTION 1
290 #define TARGET_LWSYNC_INSTRUCTION 0
293 /* Define TARGET_TLS_MARKERS if the target assembler does not support
294 arg markers for __tls_get_addr calls. */
295 #ifndef HAVE_AS_TLS_MARKERS
296 #undef TARGET_TLS_MARKERS
297 #define TARGET_TLS_MARKERS 0
299 #define TARGET_TLS_MARKERS tls_markers
302 #ifndef TARGET_SECURE_PLT
303 #define TARGET_SECURE_PLT 0
306 #ifndef TARGET_CMODEL
307 #define TARGET_CMODEL CMODEL_SMALL
310 #define TARGET_32BIT (! TARGET_64BIT)
313 #define HAVE_AS_TLS 0
316 /* Return 1 for a symbol ref for a thread-local storage symbol. */
317 #define RS6000_SYMBOL_REF_TLS_P(RTX) \
318 (GET_CODE (RTX) == SYMBOL_REF && SYMBOL_REF_TLS_MODEL (RTX) != 0)
321 /* For libgcc2 we make sure this is a compile time constant */
322 #if defined (__64BIT__) || defined (__powerpc64__) || defined (__ppc64__)
323 #undef TARGET_POWERPC64
324 #define TARGET_POWERPC64 1
326 #undef TARGET_POWERPC64
327 #define TARGET_POWERPC64 0
330 /* The option machinery will define this. */
333 #define TARGET_DEFAULT (MASK_POWER | MASK_MULTIPLE | MASK_STRING)
335 /* FPU operations supported.
336 Each use of TARGET_SINGLE_FLOAT or TARGET_DOUBLE_FLOAT must
337 also test TARGET_HARD_FLOAT. */
338 #define TARGET_SINGLE_FLOAT 1
339 #define TARGET_DOUBLE_FLOAT 1
340 #define TARGET_SINGLE_FPU 0
341 #define TARGET_SIMPLE_FPU 0
342 #define TARGET_XILINX_FPU 0
344 /* Recast the processor type to the cpu attribute. */
345 #define rs6000_cpu_attr ((enum attr_cpu)rs6000_cpu)
347 /* Define generic processor types based upon current deployment. */
348 #define PROCESSOR_COMMON PROCESSOR_PPC601
349 #define PROCESSOR_POWER PROCESSOR_RIOS1
350 #define PROCESSOR_POWERPC PROCESSOR_PPC604
351 #define PROCESSOR_POWERPC64 PROCESSOR_RS64A
353 /* Define the default processor. This is overridden by other tm.h files. */
354 #define PROCESSOR_DEFAULT PROCESSOR_RIOS1
355 #define PROCESSOR_DEFAULT64 PROCESSOR_RS64A
357 extern enum fpu_type_t fpu_type;
359 /* Specify the dialect of assembler to use. New mnemonics is dialect one
360 and the old mnemonics are dialect zero. */
361 #define ASSEMBLER_DIALECT (TARGET_NEW_MNEMONICS ? 1 : 0)
363 /* rs6000_select[0] is reserved for the default cpu defined via --with-cpu */
364 struct rs6000_cpu_select
372 extern struct rs6000_cpu_select rs6000_select[];
375 #define MASK_DEBUG_STACK 0x01 /* debug stack applications */
376 #define MASK_DEBUG_ARG 0x02 /* debug argument handling */
377 #define MASK_DEBUG_REG 0x04 /* debug register handling */
378 #define MASK_DEBUG_ADDR 0x08 /* debug memory addressing */
379 #define MASK_DEBUG_COST 0x10 /* debug rtx codes */
380 #define MASK_DEBUG_TARGET 0x20 /* debug target attribute/pragma */
381 #define MASK_DEBUG_ALL (MASK_DEBUG_STACK \
388 #define TARGET_DEBUG_STACK (rs6000_debug & MASK_DEBUG_STACK)
389 #define TARGET_DEBUG_ARG (rs6000_debug & MASK_DEBUG_ARG)
390 #define TARGET_DEBUG_REG (rs6000_debug & MASK_DEBUG_REG)
391 #define TARGET_DEBUG_ADDR (rs6000_debug & MASK_DEBUG_ADDR)
392 #define TARGET_DEBUG_COST (rs6000_debug & MASK_DEBUG_COST)
393 #define TARGET_DEBUG_TARGET (rs6000_debug & MASK_DEBUG_TARGET)
395 extern enum rs6000_vector rs6000_vector_unit[];
397 #define VECTOR_UNIT_NONE_P(MODE) \
398 (rs6000_vector_unit[(MODE)] == VECTOR_NONE)
400 #define VECTOR_UNIT_VSX_P(MODE) \
401 (rs6000_vector_unit[(MODE)] == VECTOR_VSX)
403 #define VECTOR_UNIT_ALTIVEC_P(MODE) \
404 (rs6000_vector_unit[(MODE)] == VECTOR_ALTIVEC)
406 #define VECTOR_UNIT_ALTIVEC_OR_VSX_P(MODE) \
407 (rs6000_vector_unit[(MODE)] == VECTOR_ALTIVEC \
408 || rs6000_vector_unit[(MODE)] == VECTOR_VSX)
410 /* Describe whether to use VSX loads or Altivec loads. For now, just use the
411 same unit as the vector unit we are using, but we may want to migrate to
412 using VSX style loads even for types handled by altivec. */
413 extern enum rs6000_vector rs6000_vector_mem[];
415 #define VECTOR_MEM_NONE_P(MODE) \
416 (rs6000_vector_mem[(MODE)] == VECTOR_NONE)
418 #define VECTOR_MEM_VSX_P(MODE) \
419 (rs6000_vector_mem[(MODE)] == VECTOR_VSX)
421 #define VECTOR_MEM_ALTIVEC_P(MODE) \
422 (rs6000_vector_mem[(MODE)] == VECTOR_ALTIVEC)
424 #define VECTOR_MEM_ALTIVEC_OR_VSX_P(MODE) \
425 (rs6000_vector_mem[(MODE)] == VECTOR_ALTIVEC \
426 || rs6000_vector_mem[(MODE)] == VECTOR_VSX)
428 /* Return the alignment of a given vector type, which is set based on the
429 vector unit use. VSX for instance can load 32 or 64 bit aligned words
430 without problems, while Altivec requires 128-bit aligned vectors. */
431 extern int rs6000_vector_align[];
433 #define VECTOR_ALIGN(MODE) \
434 ((rs6000_vector_align[(MODE)] != 0) \
435 ? rs6000_vector_align[(MODE)] \
436 : (int)GET_MODE_BITSIZE ((MODE)))
438 /* Alignment options for fields in structures for sub-targets following
440 ALIGN_POWER word-aligns FP doubles (default AIX ABI).
441 ALIGN_NATURAL doubleword-aligns FP doubles (align to object size).
443 Override the macro definitions when compiling libobjc to avoid undefined
444 reference to rs6000_alignment_flags due to library's use of GCC alignment
445 macros which use the macros below. */
447 #ifndef IN_TARGET_LIBS
448 #define MASK_ALIGN_POWER 0x00000000
449 #define MASK_ALIGN_NATURAL 0x00000001
450 #define TARGET_ALIGN_NATURAL (rs6000_alignment_flags & MASK_ALIGN_NATURAL)
452 #define TARGET_ALIGN_NATURAL 0
455 #define TARGET_LONG_DOUBLE_128 (rs6000_long_double_type_size == 128)
456 #define TARGET_IEEEQUAD rs6000_ieeequad
457 #define TARGET_ALTIVEC_ABI rs6000_altivec_abi
458 #define TARGET_LDBRX (TARGET_POPCNTD || rs6000_cpu == PROCESSOR_CELL)
460 #define TARGET_SPE_ABI 0
462 #define TARGET_E500 0
463 #define TARGET_ISEL64 (TARGET_ISEL && TARGET_POWERPC64)
464 #define TARGET_FPRS 1
465 #define TARGET_E500_SINGLE 0
466 #define TARGET_E500_DOUBLE 0
467 #define CHECK_E500_OPTIONS do { } while (0)
469 /* ISA 2.01 allowed FCFID to be done in 32-bit, previously it was 64-bit only.
470 Enable 32-bit fcfid's on any of the switches for newer ISA machines or
472 #define TARGET_FCFID (TARGET_POWERPC64 \
473 || TARGET_POPCNTB /* ISA 2.02 */ \
474 || TARGET_CMPB /* ISA 2.05 */ \
475 || TARGET_POPCNTD /* ISA 2.06 */ \
476 || TARGET_XILINX_FPU)
478 #define TARGET_FCTIDZ TARGET_FCFID
479 #define TARGET_STFIWX TARGET_PPC_GFXOPT
480 #define TARGET_LFIWAX TARGET_CMPB
481 #define TARGET_LFIWZX TARGET_POPCNTD
482 #define TARGET_FCFIDS TARGET_POPCNTD
483 #define TARGET_FCFIDU TARGET_POPCNTD
484 #define TARGET_FCFIDUS TARGET_POPCNTD
485 #define TARGET_FCTIDUZ TARGET_POPCNTD
486 #define TARGET_FCTIWUZ TARGET_POPCNTD
488 /* E500 processors only support plain "sync", not lwsync. */
489 #define TARGET_NO_LWSYNC TARGET_E500
491 /* Which machine supports the various reciprocal estimate instructions. */
492 #define TARGET_FRES (TARGET_HARD_FLOAT && TARGET_PPC_GFXOPT \
493 && TARGET_FPRS && TARGET_SINGLE_FLOAT)
495 #define TARGET_FRE (TARGET_HARD_FLOAT && TARGET_FPRS \
496 && TARGET_DOUBLE_FLOAT \
497 && (TARGET_POPCNTB || VECTOR_UNIT_VSX_P (DFmode)))
499 #define TARGET_FRSQRTES (TARGET_HARD_FLOAT && TARGET_POPCNTB \
500 && TARGET_FPRS && TARGET_SINGLE_FLOAT)
502 #define TARGET_FRSQRTE (TARGET_HARD_FLOAT && TARGET_FPRS \
503 && TARGET_DOUBLE_FLOAT \
504 && (TARGET_PPC_GFXOPT || VECTOR_UNIT_VSX_P (DFmode)))
506 /* Whether the various reciprocal divide/square root estimate instructions
507 exist, and whether we should automatically generate code for the instruction
509 #define RS6000_RECIP_MASK_HAVE_RE 0x1 /* have RE instruction. */
510 #define RS6000_RECIP_MASK_AUTO_RE 0x2 /* generate RE by default. */
511 #define RS6000_RECIP_MASK_HAVE_RSQRTE 0x4 /* have RSQRTE instruction. */
512 #define RS6000_RECIP_MASK_AUTO_RSQRTE 0x8 /* gen. RSQRTE by default. */
514 extern unsigned char rs6000_recip_bits[];
516 #define RS6000_RECIP_HAVE_RE_P(MODE) \
517 (rs6000_recip_bits[(int)(MODE)] & RS6000_RECIP_MASK_HAVE_RE)
519 #define RS6000_RECIP_AUTO_RE_P(MODE) \
520 (rs6000_recip_bits[(int)(MODE)] & RS6000_RECIP_MASK_AUTO_RE)
522 #define RS6000_RECIP_HAVE_RSQRTE_P(MODE) \
523 (rs6000_recip_bits[(int)(MODE)] & RS6000_RECIP_MASK_HAVE_RSQRTE)
525 #define RS6000_RECIP_AUTO_RSQRTE_P(MODE) \
526 (rs6000_recip_bits[(int)(MODE)] & RS6000_RECIP_MASK_AUTO_RSQRTE)
528 #define RS6000_RECIP_HIGH_PRECISION_P(MODE) \
529 ((MODE) == SFmode || (MODE) == V4SFmode || TARGET_RECIP_PRECISION)
531 /* The default CPU for TARGET_OPTION_OVERRIDE. */
532 #define OPTION_TARGET_CPU_DEFAULT TARGET_CPU_DEFAULT
535 #define REGISTER_TARGET_PRAGMAS() do { \
536 c_register_pragma (0, "longcall", rs6000_pragma_longcall); \
537 targetm.target_option.pragma_parse = rs6000_pragma_target_parse; \
538 targetm.resolve_overloaded_builtin = altivec_resolve_overloaded_builtin; \
541 /* Target #defines. */
542 #define TARGET_CPU_CPP_BUILTINS() \
543 rs6000_cpu_cpp_builtins (pfile)
545 /* This is used by rs6000_cpu_cpp_builtins to indicate the byte order
546 we're compiling for. Some configurations may need to override it. */
547 #define RS6000_CPU_CPP_ENDIAN_BUILTINS() \
550 if (BYTES_BIG_ENDIAN) \
552 builtin_define ("__BIG_ENDIAN__"); \
553 builtin_define ("_BIG_ENDIAN"); \
554 builtin_assert ("machine=bigendian"); \
558 builtin_define ("__LITTLE_ENDIAN__"); \
559 builtin_define ("_LITTLE_ENDIAN"); \
560 builtin_assert ("machine=littleendian"); \
565 /* Target machine storage layout. */
567 /* Define this macro if it is advisable to hold scalars in registers
568 in a wider mode than that declared by the program. In such cases,
569 the value is constrained to be within the bounds of the declared
570 type, but kept valid in the wider mode. The signedness of the
571 extension may differ from that of the type. */
573 #define PROMOTE_MODE(MODE,UNSIGNEDP,TYPE) \
574 if (GET_MODE_CLASS (MODE) == MODE_INT \
575 && GET_MODE_SIZE (MODE) < UNITS_PER_WORD) \
576 (MODE) = TARGET_32BIT ? SImode : DImode;
578 /* Define this if most significant bit is lowest numbered
579 in instructions that operate on numbered bit-fields. */
580 /* That is true on RS/6000. */
581 #define BITS_BIG_ENDIAN 1
583 /* Define this if most significant byte of a word is the lowest numbered. */
584 /* That is true on RS/6000. */
585 #define BYTES_BIG_ENDIAN 1
587 /* Define this if most significant word of a multiword number is lowest
590 For RS/6000 we can decide arbitrarily since there are no machine
591 instructions for them. Might as well be consistent with bits and bytes. */
592 #define WORDS_BIG_ENDIAN 1
594 #define MAX_BITS_PER_WORD 64
596 /* Width of a word, in units (bytes). */
597 #define UNITS_PER_WORD (! TARGET_POWERPC64 ? 4 : 8)
599 #define MIN_UNITS_PER_WORD UNITS_PER_WORD
601 #define MIN_UNITS_PER_WORD 4
603 #define UNITS_PER_FP_WORD 8
604 #define UNITS_PER_ALTIVEC_WORD 16
605 #define UNITS_PER_VSX_WORD 16
606 #define UNITS_PER_SPE_WORD 8
607 #define UNITS_PER_PAIRED_WORD 8
609 /* Type used for ptrdiff_t, as a string used in a declaration. */
610 #define PTRDIFF_TYPE "int"
612 /* Type used for size_t, as a string used in a declaration. */
613 #define SIZE_TYPE "long unsigned int"
615 /* Type used for wchar_t, as a string used in a declaration. */
616 #define WCHAR_TYPE "short unsigned int"
618 /* Width of wchar_t in bits. */
619 #define WCHAR_TYPE_SIZE 16
621 /* A C expression for the size in bits of the type `short' on the
622 target machine. If you don't define this, the default is half a
623 word. (If this would be less than one storage unit, it is
624 rounded up to one unit.) */
625 #define SHORT_TYPE_SIZE 16
627 /* A C expression for the size in bits of the type `int' on the
628 target machine. If you don't define this, the default is one
630 #define INT_TYPE_SIZE 32
632 /* A C expression for the size in bits of the type `long' on the
633 target machine. If you don't define this, the default is one
635 #define LONG_TYPE_SIZE (TARGET_32BIT ? 32 : 64)
637 /* A C expression for the size in bits of the type `long long' on the
638 target machine. If you don't define this, the default is two
640 #define LONG_LONG_TYPE_SIZE 64
642 /* A C expression for the size in bits of the type `float' on the
643 target machine. If you don't define this, the default is one
645 #define FLOAT_TYPE_SIZE 32
647 /* A C expression for the size in bits of the type `double' on the
648 target machine. If you don't define this, the default is two
650 #define DOUBLE_TYPE_SIZE 64
652 /* A C expression for the size in bits of the type `long double' on
653 the target machine. If you don't define this, the default is two
655 #define LONG_DOUBLE_TYPE_SIZE rs6000_long_double_type_size
657 /* Define this to set long double type size to use in libgcc2.c, which can
658 not depend on target_flags. */
659 #ifdef __LONG_DOUBLE_128__
660 #define LIBGCC2_LONG_DOUBLE_TYPE_SIZE 128
662 #define LIBGCC2_LONG_DOUBLE_TYPE_SIZE 64
665 /* Work around rs6000_long_double_type_size dependency in ada/targtyps.c. */
666 #define WIDEST_HARDWARE_FP_SIZE 64
668 /* Width in bits of a pointer.
669 See also the macro `Pmode' defined below. */
670 extern unsigned rs6000_pointer_size;
671 #define POINTER_SIZE rs6000_pointer_size
673 /* Allocation boundary (in *bits*) for storing arguments in argument list. */
674 #define PARM_BOUNDARY (TARGET_32BIT ? 32 : 64)
676 /* Boundary (in *bits*) on which stack pointer should be aligned. */
677 #define STACK_BOUNDARY \
678 ((TARGET_32BIT && !TARGET_ALTIVEC && !TARGET_ALTIVEC_ABI && !TARGET_VSX) \
681 /* Allocation boundary (in *bits*) for the code of a function. */
682 #define FUNCTION_BOUNDARY 32
684 /* No data type wants to be aligned rounder than this. */
685 #define BIGGEST_ALIGNMENT 128
687 /* A C expression to compute the alignment for a variables in the
688 local store. TYPE is the data type, and ALIGN is the alignment
689 that the object would ordinarily have. */
690 #define LOCAL_ALIGNMENT(TYPE, ALIGN) \
691 DATA_ALIGNMENT (TYPE, ALIGN)
693 /* Alignment of field after `int : 0' in a structure. */
694 #define EMPTY_FIELD_BOUNDARY 32
696 /* Every structure's size must be a multiple of this. */
697 #define STRUCTURE_SIZE_BOUNDARY 8
699 /* Return 1 if a structure or array containing FIELD should be
700 accessed using `BLKMODE'.
702 For the SPE, simd types are V2SI, and gcc can be tempted to put the
703 entire thing in a DI and use subregs to access the internals.
704 store_bit_field() will force (subreg:DI (reg:V2SI x))'s to the
705 back-end. Because a single GPR can hold a V2SI, but not a DI, the
706 best thing to do is set structs to BLKmode and avoid Severe Tire
709 On e500 v2, DF and DI modes suffer from the same anomaly. DF can
710 fit into 1, whereas DI still needs two. */
711 #define MEMBER_TYPE_FORCES_BLK(FIELD, MODE) \
712 ((TARGET_SPE && TREE_CODE (TREE_TYPE (FIELD)) == VECTOR_TYPE) \
713 || (TARGET_E500_DOUBLE && (MODE) == DFmode))
715 /* A bit-field declared as `int' forces `int' alignment for the struct. */
716 #define PCC_BITFIELD_TYPE_MATTERS 1
718 /* Make strings word-aligned so strcpy from constants will be faster.
719 Make vector constants quadword aligned. */
720 #define CONSTANT_ALIGNMENT(EXP, ALIGN) \
721 (TREE_CODE (EXP) == STRING_CST \
722 && (STRICT_ALIGNMENT || !optimize_size) \
723 && (ALIGN) < BITS_PER_WORD \
727 /* Make arrays of chars word-aligned for the same reasons.
728 Align vectors to 128 bits. Align SPE vectors and E500 v2 doubles to
730 #define DATA_ALIGNMENT(TYPE, ALIGN) \
731 (TREE_CODE (TYPE) == VECTOR_TYPE \
732 ? (((TARGET_SPE && SPE_VECTOR_MODE (TYPE_MODE (TYPE))) \
733 || (TARGET_PAIRED_FLOAT && PAIRED_VECTOR_MODE (TYPE_MODE (TYPE)))) \
735 : ((TARGET_E500_DOUBLE \
736 && TREE_CODE (TYPE) == REAL_TYPE \
737 && TYPE_MODE (TYPE) == DFmode) \
739 : (TREE_CODE (TYPE) == ARRAY_TYPE \
740 && TYPE_MODE (TREE_TYPE (TYPE)) == QImode \
741 && (ALIGN) < BITS_PER_WORD) ? BITS_PER_WORD : (ALIGN)))
743 /* Nonzero if move instructions will actually fail to work
744 when given unaligned data. */
745 #define STRICT_ALIGNMENT 0
747 /* Define this macro to be the value 1 if unaligned accesses have a cost
748 many times greater than aligned accesses, for example if they are
749 emulated in a trap handler. */
750 /* Altivec vector memory instructions simply ignore the low bits; SPE vector
751 memory instructions trap on unaligned accesses; VSX memory instructions are
752 aligned to 4 or 8 bytes. */
753 #define SLOW_UNALIGNED_ACCESS(MODE, ALIGN) \
755 || (((MODE) == SFmode || (MODE) == DFmode || (MODE) == TFmode \
756 || (MODE) == SDmode || (MODE) == DDmode || (MODE) == TDmode \
757 || (MODE) == DImode) \
759 || (VECTOR_MODE_P ((MODE)) && (((int)(ALIGN)) < VECTOR_ALIGN (MODE))))
762 /* Standard register usage. */
764 /* Number of actual hardware registers.
765 The hardware registers are assigned numbers for the compiler
766 from 0 to just below FIRST_PSEUDO_REGISTER.
767 All registers that the compiler knows about must be given numbers,
768 even those that are not normally considered general registers.
770 RS/6000 has 32 fixed-point registers, 32 floating-point registers,
771 an MQ register, a count register, a link register, and 8 condition
772 register fields, which we view here as separate registers. AltiVec
773 adds 32 vector registers and a VRsave register.
775 In addition, the difference between the frame and argument pointers is
776 a function of the number of registers saved, so we need to have a
777 register for AP that will later be eliminated in favor of SP or FP.
778 This is a normal register, but it is fixed.
780 We also create a pseudo register for float/int conversions, that will
781 really represent the memory location used. It is represented here as
782 a register, in order to work around problems in allocating stack storage
785 Another pseudo (not included in DWARF_FRAME_REGISTERS) is soft frame
786 pointer, which is eventually eliminated in favor of SP or FP. */
788 #define FIRST_PSEUDO_REGISTER 114
790 /* This must be included for pre gcc 3.0 glibc compatibility. */
791 #define PRE_GCC3_DWARF_FRAME_REGISTERS 77
793 /* Add 32 dwarf columns for synthetic SPE registers. */
794 #define DWARF_FRAME_REGISTERS ((FIRST_PSEUDO_REGISTER - 1) + 32)
796 /* The SPE has an additional 32 synthetic registers, with DWARF debug
797 info numbering for these registers starting at 1200. While eh_frame
798 register numbering need not be the same as the debug info numbering,
799 we choose to number these regs for eh_frame at 1200 too. This allows
800 future versions of the rs6000 backend to add hard registers and
801 continue to use the gcc hard register numbering for eh_frame. If the
802 extra SPE registers in eh_frame were numbered starting from the
803 current value of FIRST_PSEUDO_REGISTER, then if FIRST_PSEUDO_REGISTER
804 changed we'd need to introduce a mapping in DWARF_FRAME_REGNUM to
805 avoid invalidating older SPE eh_frame info.
807 We must map them here to avoid huge unwinder tables mostly consisting
809 #define DWARF_REG_TO_UNWIND_COLUMN(r) \
810 ((r) > 1200 ? ((r) - 1200 + FIRST_PSEUDO_REGISTER - 1) : (r))
812 /* Use standard DWARF numbering for DWARF debugging information. */
813 #define DBX_REGISTER_NUMBER(REGNO) rs6000_dbx_register_number (REGNO)
815 /* Use gcc hard register numbering for eh_frame. */
816 #define DWARF_FRAME_REGNUM(REGNO) (REGNO)
818 /* Map register numbers held in the call frame info that gcc has
819 collected using DWARF_FRAME_REGNUM to those that should be output in
820 .debug_frame and .eh_frame. We continue to use gcc hard reg numbers
821 for .eh_frame, but use the numbers mandated by the various ABIs for
822 .debug_frame. rs6000_emit_prologue has translated any combination of
823 CR2, CR3, CR4 saves to a save of CR2. The actual code emitted saves
824 the whole of CR, so we map CR2_REGNO to the DWARF reg for CR. */
825 #define DWARF2_FRAME_REG_OUT(REGNO, FOR_EH) \
826 ((FOR_EH) ? (REGNO) \
827 : (REGNO) == CR2_REGNO ? 64 \
828 : DBX_REGISTER_NUMBER (REGNO))
830 /* 1 for registers that have pervasive standard uses
831 and are not available for the register allocator.
833 On RS/6000, r1 is used for the stack. On Darwin, r2 is available
834 as a local register; for all other OS's r2 is the TOC pointer.
836 cr5 is not supposed to be used.
838 On System V implementations, r13 is fixed and not available for use. */
840 #define FIXED_REGISTERS \
841 {0, 1, FIXED_R2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, FIXED_R13, 0, 0, \
842 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
843 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
844 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
845 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 1, \
846 /* AltiVec registers. */ \
847 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
848 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
853 /* 1 for registers not available across function calls.
854 These must include the FIXED_REGISTERS and also any
855 registers that can be used without being saved.
856 The latter must include the registers where values are returned
857 and the register where structure-value addresses are passed.
858 Aside from that, you can include as many other registers as you like. */
860 #define CALL_USED_REGISTERS \
861 {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, FIXED_R13, 0, 0, \
862 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
863 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, \
864 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
865 1, 1, 1, 1, 1, 1, 0, 0, 0, 1, 1, 1, 1, \
866 /* AltiVec registers. */ \
867 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
868 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
873 /* Like `CALL_USED_REGISTERS' except this macro doesn't require that
874 the entire set of `FIXED_REGISTERS' be included.
875 (`CALL_USED_REGISTERS' must be a superset of `FIXED_REGISTERS').
876 This macro is optional. If not specified, it defaults to the value
877 of `CALL_USED_REGISTERS'. */
879 #define CALL_REALLY_USED_REGISTERS \
880 {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, FIXED_R13, 0, 0, \
881 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
882 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, \
883 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
884 1, 1, 1, 1, 1, 1, 0, 0, 0, 1, 1, 1, 1, \
885 /* AltiVec registers. */ \
886 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
887 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
892 #define TOTAL_ALTIVEC_REGS (LAST_ALTIVEC_REGNO - FIRST_ALTIVEC_REGNO + 1)
894 #define FIRST_SAVED_ALTIVEC_REGNO (FIRST_ALTIVEC_REGNO+20)
895 #define FIRST_SAVED_FP_REGNO (14+32)
896 #define FIRST_SAVED_GP_REGNO 13
898 /* List the order in which to allocate registers. Each register must be
899 listed once, even those in FIXED_REGISTERS.
901 We allocate in the following order:
902 fp0 (not saved or used for anything)
903 fp13 - fp2 (not saved; incoming fp arg registers)
904 fp1 (not saved; return value)
905 fp31 - fp14 (saved; order given to save least number)
906 cr7, cr6 (not saved or special)
907 cr1 (not saved, but used for FP operations)
908 cr0 (not saved, but used for arithmetic operations)
909 cr4, cr3, cr2 (saved)
910 r0 (not saved; cannot be base reg)
911 r9 (not saved; best for TImode)
912 r11, r10, r8-r4 (not saved; highest used first to make less conflict)
913 r3 (not saved; return value register)
914 r31 - r13 (saved; order given to save least number)
915 r12 (not saved; if used for DImode or DFmode would use r13)
916 mq (not saved; best to use it if we can)
917 ctr (not saved; when we have the choice ctr is better)
919 cr5, r1, r2, ap, ca (fixed)
920 v0 - v1 (not saved or used for anything)
921 v13 - v3 (not saved; incoming vector arg registers)
922 v2 (not saved; incoming vector arg reg; return value)
923 v19 - v14 (not saved or used for anything)
924 v31 - v20 (saved; order given to save least number)
926 spe_acc, spefscr (fixed)
931 #define MAYBE_R2_AVAILABLE
932 #define MAYBE_R2_FIXED 2,
934 #define MAYBE_R2_AVAILABLE 2,
935 #define MAYBE_R2_FIXED
938 #define REG_ALLOC_ORDER \
940 45, 44, 43, 42, 41, 40, 39, 38, 37, 36, 35, 34, \
942 63, 62, 61, 60, 59, 58, 57, 56, 55, 54, 53, 52, 51, \
943 50, 49, 48, 47, 46, \
944 75, 74, 69, 68, 72, 71, 70, \
945 0, MAYBE_R2_AVAILABLE \
946 9, 11, 10, 8, 7, 6, 5, 4, \
948 31, 30, 29, 28, 27, 26, 25, 24, 23, 22, 21, 20, 19, \
949 18, 17, 16, 15, 14, 13, 12, \
951 73, 1, MAYBE_R2_FIXED 67, 76, \
952 /* AltiVec registers. */ \
954 90, 89, 88, 87, 86, 85, 84, 83, 82, 81, 80, \
956 96, 95, 94, 93, 92, 91, \
957 108, 107, 106, 105, 104, 103, 102, 101, 100, 99, 98, 97, \
962 /* True if register is floating-point. */
963 #define FP_REGNO_P(N) ((N) >= 32 && (N) <= 63)
965 /* True if register is a condition register. */
966 #define CR_REGNO_P(N) ((N) >= CR0_REGNO && (N) <= CR7_REGNO)
968 /* True if register is a condition register, but not cr0. */
969 #define CR_REGNO_NOT_CR0_P(N) ((N) >= CR1_REGNO && (N) <= CR7_REGNO)
971 /* True if register is an integer register. */
972 #define INT_REGNO_P(N) \
973 ((N) <= 31 || (N) == ARG_POINTER_REGNUM || (N) == FRAME_POINTER_REGNUM)
975 /* SPE SIMD registers are just the GPRs. */
976 #define SPE_SIMD_REGNO_P(N) ((N) <= 31)
978 /* PAIRED SIMD registers are just the FPRs. */
979 #define PAIRED_SIMD_REGNO_P(N) ((N) >= 32 && (N) <= 63)
981 /* True if register is the CA register. */
982 #define CA_REGNO_P(N) ((N) == CA_REGNO)
984 /* True if register is an AltiVec register. */
985 #define ALTIVEC_REGNO_P(N) ((N) >= FIRST_ALTIVEC_REGNO && (N) <= LAST_ALTIVEC_REGNO)
987 /* True if register is a VSX register. */
988 #define VSX_REGNO_P(N) (FP_REGNO_P (N) || ALTIVEC_REGNO_P (N))
990 /* Alternate name for any vector register supporting floating point, no matter
991 which instruction set(s) are available. */
992 #define VFLOAT_REGNO_P(N) \
993 (ALTIVEC_REGNO_P (N) || (TARGET_VSX && FP_REGNO_P (N)))
995 /* Alternate name for any vector register supporting integer, no matter which
996 instruction set(s) are available. */
997 #define VINT_REGNO_P(N) ALTIVEC_REGNO_P (N)
999 /* Alternate name for any vector register supporting logical operations, no
1000 matter which instruction set(s) are available. */
1001 #define VLOGICAL_REGNO_P(N) VFLOAT_REGNO_P (N)
1003 /* Return number of consecutive hard regs needed starting at reg REGNO
1004 to hold something of mode MODE. */
1006 #define HARD_REGNO_NREGS(REGNO, MODE) rs6000_hard_regno_nregs[(MODE)][(REGNO)]
1008 #define HARD_REGNO_CALL_PART_CLOBBERED(REGNO, MODE) \
1009 (((TARGET_32BIT && TARGET_POWERPC64 \
1010 && (GET_MODE_SIZE (MODE) > 4) \
1011 && INT_REGNO_P (REGNO)) ? 1 : 0) \
1012 || (TARGET_VSX && FP_REGNO_P (REGNO) \
1013 && GET_MODE_SIZE (MODE) > 8))
1015 #define VSX_VECTOR_MODE(MODE) \
1016 ((MODE) == V4SFmode \
1017 || (MODE) == V2DFmode) \
1019 #define VSX_SCALAR_MODE(MODE) \
1022 #define VSX_MODE(MODE) \
1023 (VSX_VECTOR_MODE (MODE) \
1024 || VSX_SCALAR_MODE (MODE))
1026 #define VSX_MOVE_MODE(MODE) \
1027 (VSX_VECTOR_MODE (MODE) \
1028 || VSX_SCALAR_MODE (MODE) \
1029 || ALTIVEC_VECTOR_MODE (MODE) \
1030 || (MODE) == TImode)
1032 #define ALTIVEC_VECTOR_MODE(MODE) \
1033 ((MODE) == V16QImode \
1034 || (MODE) == V8HImode \
1035 || (MODE) == V4SFmode \
1036 || (MODE) == V4SImode)
1038 #define SPE_VECTOR_MODE(MODE) \
1039 ((MODE) == V4HImode \
1040 || (MODE) == V2SFmode \
1041 || (MODE) == V1DImode \
1042 || (MODE) == V2SImode)
1044 #define PAIRED_VECTOR_MODE(MODE) \
1045 ((MODE) == V2SFmode)
1047 /* Value is TRUE if hard register REGNO can hold a value of
1048 machine-mode MODE. */
1049 #define HARD_REGNO_MODE_OK(REGNO, MODE) \
1050 rs6000_hard_regno_mode_ok_p[(int)(MODE)][REGNO]
1052 /* Value is 1 if it is a good idea to tie two pseudo registers
1053 when one has mode MODE1 and one has mode MODE2.
1054 If HARD_REGNO_MODE_OK could produce different values for MODE1 and MODE2,
1055 for any hard reg, then this must be 0 for correct output. */
1056 #define MODES_TIEABLE_P(MODE1, MODE2) \
1057 (SCALAR_FLOAT_MODE_P (MODE1) \
1058 ? SCALAR_FLOAT_MODE_P (MODE2) \
1059 : SCALAR_FLOAT_MODE_P (MODE2) \
1060 ? SCALAR_FLOAT_MODE_P (MODE1) \
1061 : GET_MODE_CLASS (MODE1) == MODE_CC \
1062 ? GET_MODE_CLASS (MODE2) == MODE_CC \
1063 : GET_MODE_CLASS (MODE2) == MODE_CC \
1064 ? GET_MODE_CLASS (MODE1) == MODE_CC \
1065 : SPE_VECTOR_MODE (MODE1) \
1066 ? SPE_VECTOR_MODE (MODE2) \
1067 : SPE_VECTOR_MODE (MODE2) \
1068 ? SPE_VECTOR_MODE (MODE1) \
1069 : ALTIVEC_VECTOR_MODE (MODE1) \
1070 ? ALTIVEC_VECTOR_MODE (MODE2) \
1071 : ALTIVEC_VECTOR_MODE (MODE2) \
1072 ? ALTIVEC_VECTOR_MODE (MODE1) \
1073 : VSX_VECTOR_MODE (MODE1) \
1074 ? VSX_VECTOR_MODE (MODE2) \
1075 : VSX_VECTOR_MODE (MODE2) \
1076 ? VSX_VECTOR_MODE (MODE1) \
1079 /* Post-reload, we can't use any new AltiVec registers, as we already
1080 emitted the vrsave mask. */
1082 #define HARD_REGNO_RENAME_OK(SRC, DST) \
1083 (! ALTIVEC_REGNO_P (DST) || df_regs_ever_live_p (DST))
1085 /* Specify the cost of a branch insn; roughly the number of extra insns that
1086 should be added to avoid a branch.
1088 Set this to 3 on the RS/6000 since that is roughly the average cost of an
1089 unscheduled conditional branch. */
1091 #define BRANCH_COST(speed_p, predictable_p) 3
1093 /* Override BRANCH_COST heuristic which empirically produces worse
1094 performance for removing short circuiting from the logical ops. */
1096 #define LOGICAL_OP_NON_SHORT_CIRCUIT 0
1098 /* A fixed register used at epilogue generation to address SPE registers
1099 with negative offsets. The 64-bit load/store instructions on the SPE
1100 only take positive offsets (and small ones at that), so we need to
1101 reserve a register for consing up negative offsets. */
1103 #define FIXED_SCRATCH 0
1105 /* Specify the registers used for certain standard purposes.
1106 The values of these macros are register numbers. */
1108 /* RS/6000 pc isn't overloaded on a register that the compiler knows about. */
1109 /* #define PC_REGNUM */
1111 /* Register to use for pushing function arguments. */
1112 #define STACK_POINTER_REGNUM 1
1114 /* Base register for access to local variables of the function. */
1115 #define HARD_FRAME_POINTER_REGNUM 31
1117 /* Base register for access to local variables of the function. */
1118 #define FRAME_POINTER_REGNUM 113
1120 /* Base register for access to arguments of the function. */
1121 #define ARG_POINTER_REGNUM 67
1123 /* Place to put static chain when calling a function that requires it. */
1124 #define STATIC_CHAIN_REGNUM 11
1127 /* Define the classes of registers for register constraints in the
1128 machine description. Also define ranges of constants.
1130 One of the classes must always be named ALL_REGS and include all hard regs.
1131 If there is more than one class, another class must be named NO_REGS
1132 and contain no registers.
1134 The name GENERAL_REGS must be the name of a class (or an alias for
1135 another name such as ALL_REGS). This is the class of registers
1136 that is allowed by "g" or "r" in a register constraint.
1137 Also, registers outside this class are allocated only when
1138 instructions express preferences for them.
1140 The classes must be numbered in nondecreasing order; that is,
1141 a larger-numbered class must never be contained completely
1142 in a smaller-numbered class.
1144 For any two classes, it is very desirable that there be another
1145 class that represents their union. */
1147 /* The RS/6000 has three types of registers, fixed-point, floating-point, and
1148 condition registers, plus three special registers, MQ, CTR, and the link
1149 register. AltiVec adds a vector register class. VSX registers overlap the
1150 FPR registers and the Altivec registers.
1152 However, r0 is special in that it cannot be used as a base register.
1153 So make a class for registers valid as base registers.
1155 Also, cr0 is the only condition code register that can be used in
1156 arithmetic insns, so make a separate class for it. */
1185 #define N_REG_CLASSES (int) LIM_REG_CLASSES
1187 /* Give names of register classes as strings for dump file. */
1189 #define REG_CLASS_NAMES \
1201 "NON_SPECIAL_REGS", \
1205 "LINK_OR_CTR_REGS", \
1207 "SPEC_OR_GEN_REGS", \
1215 /* Define which registers fit in which classes.
1216 This is an initializer for a vector of HARD_REG_SET
1217 of length N_REG_CLASSES. */
1219 #define REG_CLASS_CONTENTS \
1221 { 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* NO_REGS */ \
1222 { 0xfffffffe, 0x00000000, 0x00000008, 0x00020000 }, /* BASE_REGS */ \
1223 { 0xffffffff, 0x00000000, 0x00000008, 0x00020000 }, /* GENERAL_REGS */ \
1224 { 0x00000000, 0xffffffff, 0x00000000, 0x00000000 }, /* FLOAT_REGS */ \
1225 { 0x00000000, 0x00000000, 0xffffe000, 0x00001fff }, /* ALTIVEC_REGS */ \
1226 { 0x00000000, 0xffffffff, 0xffffe000, 0x00001fff }, /* VSX_REGS */ \
1227 { 0x00000000, 0x00000000, 0x00000000, 0x00002000 }, /* VRSAVE_REGS */ \
1228 { 0x00000000, 0x00000000, 0x00000000, 0x00004000 }, /* VSCR_REGS */ \
1229 { 0x00000000, 0x00000000, 0x00000000, 0x00008000 }, /* SPE_ACC_REGS */ \
1230 { 0x00000000, 0x00000000, 0x00000000, 0x00010000 }, /* SPEFSCR_REGS */ \
1231 { 0xffffffff, 0xffffffff, 0x00000008, 0x00020000 }, /* NON_SPECIAL_REGS */ \
1232 { 0x00000000, 0x00000000, 0x00000001, 0x00000000 }, /* MQ_REGS */ \
1233 { 0x00000000, 0x00000000, 0x00000002, 0x00000000 }, /* LINK_REGS */ \
1234 { 0x00000000, 0x00000000, 0x00000004, 0x00000000 }, /* CTR_REGS */ \
1235 { 0x00000000, 0x00000000, 0x00000006, 0x00000000 }, /* LINK_OR_CTR_REGS */ \
1236 { 0x00000000, 0x00000000, 0x00000007, 0x00002000 }, /* SPECIAL_REGS */ \
1237 { 0xffffffff, 0x00000000, 0x0000000f, 0x00022000 }, /* SPEC_OR_GEN_REGS */ \
1238 { 0x00000000, 0x00000000, 0x00000010, 0x00000000 }, /* CR0_REGS */ \
1239 { 0x00000000, 0x00000000, 0x00000ff0, 0x00000000 }, /* CR_REGS */ \
1240 { 0xffffffff, 0x00000000, 0x0000efff, 0x00020000 }, /* NON_FLOAT_REGS */ \
1241 { 0x00000000, 0x00000000, 0x00001000, 0x00000000 }, /* CA_REGS */ \
1242 { 0xffffffff, 0xffffffff, 0xffffffff, 0x0003ffff } /* ALL_REGS */ \
1245 /* The following macro defines cover classes for Integrated Register
1246 Allocator. Cover classes is a set of non-intersected register
1247 classes covering all hard registers used for register allocation
1248 purpose. Any move between two registers of a cover class should be
1249 cheaper than load or store of the registers. The macro value is
1250 array of register classes with LIM_REG_CLASSES used as the end
1253 We need two IRA_COVER_CLASSES, one for pre-VSX, and the other for VSX to
1254 account for the Altivec and Floating registers being subsets of the VSX
1257 #define IRA_COVER_CLASSES_PRE_VSX \
1259 GENERAL_REGS, SPECIAL_REGS, FLOAT_REGS, ALTIVEC_REGS, /* VSX_REGS, */ \
1260 /* VRSAVE_REGS,*/ VSCR_REGS, SPE_ACC_REGS, SPEFSCR_REGS, \
1261 /* MQ_REGS, LINK_REGS, CTR_REGS, */ \
1262 CR_REGS, CA_REGS, LIM_REG_CLASSES \
1265 #define IRA_COVER_CLASSES_VSX \
1267 GENERAL_REGS, SPECIAL_REGS, /* FLOAT_REGS, ALTIVEC_REGS, */ VSX_REGS, \
1268 /* VRSAVE_REGS,*/ VSCR_REGS, SPE_ACC_REGS, SPEFSCR_REGS, \
1269 /* MQ_REGS, LINK_REGS, CTR_REGS, */ \
1270 CR_REGS, CA_REGS, LIM_REG_CLASSES \
1273 /* The same information, inverted:
1274 Return the class number of the smallest class containing
1275 reg number REGNO. This could be a conditional expression
1276 or could index an array. */
1278 extern enum reg_class rs6000_regno_regclass[FIRST_PSEUDO_REGISTER];
1281 #define REGNO_REG_CLASS(REGNO) \
1282 (gcc_assert (IN_RANGE ((REGNO), 0, FIRST_PSEUDO_REGISTER-1)), \
1283 rs6000_regno_regclass[(REGNO)])
1286 #define REGNO_REG_CLASS(REGNO) rs6000_regno_regclass[(REGNO)]
1289 /* Register classes for various constraints that are based on the target
1291 enum r6000_reg_class_enum {
1292 RS6000_CONSTRAINT_d, /* fpr registers for double values */
1293 RS6000_CONSTRAINT_f, /* fpr registers for single values */
1294 RS6000_CONSTRAINT_v, /* Altivec registers */
1295 RS6000_CONSTRAINT_wa, /* Any VSX register */
1296 RS6000_CONSTRAINT_wd, /* VSX register for V2DF */
1297 RS6000_CONSTRAINT_wf, /* VSX register for V4SF */
1298 RS6000_CONSTRAINT_ws, /* VSX register for DF */
1299 RS6000_CONSTRAINT_MAX
1302 extern enum reg_class rs6000_constraints[RS6000_CONSTRAINT_MAX];
1304 /* The class value for index registers, and the one for base regs. */
1305 #define INDEX_REG_CLASS GENERAL_REGS
1306 #define BASE_REG_CLASS BASE_REGS
1308 /* Return whether a given register class can hold VSX objects. */
1309 #define VSX_REG_CLASS_P(CLASS) \
1310 ((CLASS) == VSX_REGS || (CLASS) == FLOAT_REGS || (CLASS) == ALTIVEC_REGS)
1312 /* Given an rtx X being reloaded into a reg required to be
1313 in class CLASS, return the class of reg to actually use.
1314 In general this is just CLASS; but on some machines
1315 in some cases it is preferable to use a more restrictive class.
1317 On the RS/6000, we have to return NO_REGS when we want to reload a
1318 floating-point CONST_DOUBLE to force it to be copied to memory.
1320 We also don't want to reload integer values into floating-point
1321 registers if we can at all help it. In fact, this can
1322 cause reload to die, if it tries to generate a reload of CTR
1323 into a FP register and discovers it doesn't have the memory location
1326 ??? Would it be a good idea to have reload do the converse, that is
1327 try to reload floating modes into FP registers if possible?
1330 #define PREFERRED_RELOAD_CLASS(X,CLASS) \
1331 rs6000_preferred_reload_class_ptr (X, CLASS)
1333 /* Return the register class of a scratch register needed to copy IN into
1334 or out of a register in CLASS in MODE. If it can be done directly,
1335 NO_REGS is returned. */
1337 #define SECONDARY_RELOAD_CLASS(CLASS,MODE,IN) \
1338 rs6000_secondary_reload_class_ptr (CLASS, MODE, IN)
1340 /* If we are copying between FP or AltiVec registers and anything
1341 else, we need a memory location. The exception is when we are
1342 targeting ppc64 and the move to/from fpr to gpr instructions
1345 #define SECONDARY_MEMORY_NEEDED(CLASS1,CLASS2,MODE) \
1346 rs6000_secondary_memory_needed_ptr (CLASS1, CLASS2, MODE)
1348 /* For cpus that cannot load/store SDmode values from the 64-bit
1349 FP registers without using a full 64-bit load/store, we need
1350 to allocate a full 64-bit stack slot for them. */
1352 #define SECONDARY_MEMORY_NEEDED_RTX(MODE) \
1353 rs6000_secondary_memory_needed_rtx (MODE)
1355 /* Return the maximum number of consecutive registers
1356 needed to represent mode MODE in a register of class CLASS.
1358 On RS/6000, this is the size of MODE in words, except in the FP regs, where
1359 a single reg is enough for two words, unless we have VSX, where the FP
1360 registers can hold 128 bits. */
1361 #define CLASS_MAX_NREGS(CLASS, MODE) rs6000_class_max_nregs[(MODE)][(CLASS)]
1363 /* Return nonzero if for CLASS a mode change from FROM to TO is invalid. */
1365 #define CANNOT_CHANGE_MODE_CLASS(FROM, TO, CLASS) \
1366 rs6000_cannot_change_mode_class_ptr (FROM, TO, CLASS)
1368 /* Stack layout; function entry, exit and calling. */
1370 /* Define this if pushing a word on the stack
1371 makes the stack pointer a smaller address. */
1372 #define STACK_GROWS_DOWNWARD
1374 /* Offsets recorded in opcodes are a multiple of this alignment factor. */
1375 #define DWARF_CIE_DATA_ALIGNMENT (-((int) (TARGET_32BIT ? 4 : 8)))
1377 /* Define this to nonzero if the nominal address of the stack frame
1378 is at the high-address end of the local variables;
1379 that is, each additional local variable allocated
1380 goes at a more negative offset in the frame.
1382 On the RS/6000, we grow upwards, from the area after the outgoing
1384 #define FRAME_GROWS_DOWNWARD (flag_stack_protect != 0)
1386 /* Size of the outgoing register save area */
1387 #define RS6000_REG_SAVE ((DEFAULT_ABI == ABI_AIX \
1388 || DEFAULT_ABI == ABI_DARWIN) \
1389 ? (TARGET_64BIT ? 64 : 32) \
1392 /* Size of the fixed area on the stack */
1393 #define RS6000_SAVE_AREA \
1394 (((DEFAULT_ABI == ABI_AIX || DEFAULT_ABI == ABI_DARWIN) ? 24 : 8) \
1395 << (TARGET_64BIT ? 1 : 0))
1397 /* MEM representing address to save the TOC register */
1398 #define RS6000_SAVE_TOC gen_rtx_MEM (Pmode, \
1399 plus_constant (stack_pointer_rtx, \
1400 (TARGET_32BIT ? 20 : 40)))
1402 /* Align an address */
1403 #define RS6000_ALIGN(n,a) (((n) + (a) - 1) & ~((a) - 1))
1405 /* Offset within stack frame to start allocating local variables at.
1406 If FRAME_GROWS_DOWNWARD, this is the offset to the END of the
1407 first local allocated. Otherwise, it is the offset to the BEGINNING
1408 of the first local allocated.
1410 On the RS/6000, the frame pointer is the same as the stack pointer,
1411 except for dynamic allocations. So we start after the fixed area and
1412 outgoing parameter area. */
1414 #define STARTING_FRAME_OFFSET \
1415 (FRAME_GROWS_DOWNWARD \
1417 : (RS6000_ALIGN (crtl->outgoing_args_size, \
1418 (TARGET_ALTIVEC || TARGET_VSX) ? 16 : 8) \
1419 + RS6000_SAVE_AREA))
1421 /* Offset from the stack pointer register to an item dynamically
1422 allocated on the stack, e.g., by `alloca'.
1424 The default value for this macro is `STACK_POINTER_OFFSET' plus the
1425 length of the outgoing arguments. The default is correct for most
1426 machines. See `function.c' for details. */
1427 #define STACK_DYNAMIC_OFFSET(FUNDECL) \
1428 (RS6000_ALIGN (crtl->outgoing_args_size, \
1429 (TARGET_ALTIVEC || TARGET_VSX) ? 16 : 8) \
1430 + (STACK_POINTER_OFFSET))
1432 /* If we generate an insn to push BYTES bytes,
1433 this says how many the stack pointer really advances by.
1434 On RS/6000, don't define this because there are no push insns. */
1435 /* #define PUSH_ROUNDING(BYTES) */
1437 /* Offset of first parameter from the argument pointer register value.
1438 On the RS/6000, we define the argument pointer to the start of the fixed
1440 #define FIRST_PARM_OFFSET(FNDECL) RS6000_SAVE_AREA
1442 /* Offset from the argument pointer register value to the top of
1443 stack. This is different from FIRST_PARM_OFFSET because of the
1444 register save area. */
1445 #define ARG_POINTER_CFA_OFFSET(FNDECL) 0
1447 /* Define this if stack space is still allocated for a parameter passed
1448 in a register. The value is the number of bytes allocated to this
1450 #define REG_PARM_STACK_SPACE(FNDECL) RS6000_REG_SAVE
1452 /* Define this if the above stack space is to be considered part of the
1453 space allocated by the caller. */
1454 #define OUTGOING_REG_PARM_STACK_SPACE(FNTYPE) 1
1456 /* This is the difference between the logical top of stack and the actual sp.
1458 For the RS/6000, sp points past the fixed area. */
1459 #define STACK_POINTER_OFFSET RS6000_SAVE_AREA
1461 /* Define this if the maximum size of all the outgoing args is to be
1462 accumulated and pushed during the prologue. The amount can be
1463 found in the variable crtl->outgoing_args_size. */
1464 #define ACCUMULATE_OUTGOING_ARGS 1
1466 /* Define how to find the value returned by a library function
1467 assuming the value has mode MODE. */
1469 #define LIBCALL_VALUE(MODE) rs6000_libcall_value ((MODE))
1471 /* DRAFT_V4_STRUCT_RET defaults off. */
1472 #define DRAFT_V4_STRUCT_RET 0
1474 /* Let TARGET_RETURN_IN_MEMORY control what happens. */
1475 #define DEFAULT_PCC_STRUCT_RETURN 0
1477 /* Mode of stack savearea.
1478 FUNCTION is VOIDmode because calling convention maintains SP.
1479 BLOCK needs Pmode for SP.
1480 NONLOCAL needs twice Pmode to maintain both backchain and SP. */
1481 #define STACK_SAVEAREA_MODE(LEVEL) \
1482 (LEVEL == SAVE_FUNCTION ? VOIDmode \
1483 : LEVEL == SAVE_NONLOCAL ? (TARGET_32BIT ? DImode : TImode) : Pmode)
1485 /* Minimum and maximum general purpose registers used to hold arguments. */
1486 #define GP_ARG_MIN_REG 3
1487 #define GP_ARG_MAX_REG 10
1488 #define GP_ARG_NUM_REG (GP_ARG_MAX_REG - GP_ARG_MIN_REG + 1)
1490 /* Minimum and maximum floating point registers used to hold arguments. */
1491 #define FP_ARG_MIN_REG 33
1492 #define FP_ARG_AIX_MAX_REG 45
1493 #define FP_ARG_V4_MAX_REG 40
1494 #define FP_ARG_MAX_REG ((DEFAULT_ABI == ABI_AIX \
1495 || DEFAULT_ABI == ABI_DARWIN) \
1496 ? FP_ARG_AIX_MAX_REG : FP_ARG_V4_MAX_REG)
1497 #define FP_ARG_NUM_REG (FP_ARG_MAX_REG - FP_ARG_MIN_REG + 1)
1499 /* Minimum and maximum AltiVec registers used to hold arguments. */
1500 #define ALTIVEC_ARG_MIN_REG (FIRST_ALTIVEC_REGNO + 2)
1501 #define ALTIVEC_ARG_MAX_REG (ALTIVEC_ARG_MIN_REG + 11)
1502 #define ALTIVEC_ARG_NUM_REG (ALTIVEC_ARG_MAX_REG - ALTIVEC_ARG_MIN_REG + 1)
1504 /* Return registers */
1505 #define GP_ARG_RETURN GP_ARG_MIN_REG
1506 #define FP_ARG_RETURN FP_ARG_MIN_REG
1507 #define ALTIVEC_ARG_RETURN (FIRST_ALTIVEC_REGNO + 2)
1509 /* Flags for the call/call_value rtl operations set up by function_arg */
1510 #define CALL_NORMAL 0x00000000 /* no special processing */
1511 /* Bits in 0x00000001 are unused. */
1512 #define CALL_V4_CLEAR_FP_ARGS 0x00000002 /* V.4, no FP args passed */
1513 #define CALL_V4_SET_FP_ARGS 0x00000004 /* V.4, FP args were passed */
1514 #define CALL_LONG 0x00000008 /* always call indirect */
1515 #define CALL_LIBCALL 0x00000010 /* libcall */
1517 /* We don't have prologue and epilogue functions to save/restore
1518 everything for most ABIs. */
1519 #define WORLD_SAVE_P(INFO) 0
1521 /* 1 if N is a possible register number for a function value
1522 as seen by the caller.
1524 On RS/6000, this is r3, fp1, and v2 (for AltiVec). */
1525 #define FUNCTION_VALUE_REGNO_P(N) \
1526 ((N) == GP_ARG_RETURN \
1527 || ((N) == FP_ARG_RETURN && TARGET_HARD_FLOAT && TARGET_FPRS) \
1528 || ((N) == ALTIVEC_ARG_RETURN && TARGET_ALTIVEC && TARGET_ALTIVEC_ABI))
1530 /* 1 if N is a possible register number for function argument passing.
1531 On RS/6000, these are r3-r10 and fp1-fp13.
1532 On AltiVec, v2 - v13 are used for passing vectors. */
1533 #define FUNCTION_ARG_REGNO_P(N) \
1534 ((unsigned) (N) - GP_ARG_MIN_REG < GP_ARG_NUM_REG \
1535 || ((unsigned) (N) - ALTIVEC_ARG_MIN_REG < ALTIVEC_ARG_NUM_REG \
1536 && TARGET_ALTIVEC && TARGET_ALTIVEC_ABI) \
1537 || ((unsigned) (N) - FP_ARG_MIN_REG < FP_ARG_NUM_REG \
1538 && TARGET_HARD_FLOAT && TARGET_FPRS))
1540 /* Define a data type for recording info about an argument list
1541 during the scan of that argument list. This data type should
1542 hold all necessary information about the function itself
1543 and about the args processed so far, enough to enable macros
1544 such as FUNCTION_ARG to determine where the next arg should go.
1546 On the RS/6000, this is a structure. The first element is the number of
1547 total argument words, the second is used to store the next
1548 floating-point register number, and the third says how many more args we
1549 have prototype types for.
1551 For ABI_V4, we treat these slightly differently -- `sysv_gregno' is
1552 the next available GP register, `fregno' is the next available FP
1553 register, and `words' is the number of words used on the stack.
1555 The varargs/stdarg support requires that this structure's size
1556 be a multiple of sizeof(int). */
1558 typedef struct rs6000_args
1560 int words; /* # words used for passing GP registers */
1561 int fregno; /* next available FP register */
1562 int vregno; /* next available AltiVec register */
1563 int nargs_prototype; /* # args left in the current prototype */
1564 int prototype; /* Whether a prototype was defined */
1565 int stdarg; /* Whether function is a stdarg function. */
1566 int call_cookie; /* Do special things for this call */
1567 int sysv_gregno; /* next available GP register */
1568 int intoffset; /* running offset in struct (darwin64) */
1569 int use_stack; /* any part of struct on stack (darwin64) */
1570 int floats_in_gpr; /* count of SFmode floats taking up
1571 GPR space (darwin64) */
1572 int named; /* false for varargs params */
1573 int escapes; /* if function visible outside tu */
1576 /* Initialize a variable CUM of type CUMULATIVE_ARGS
1577 for a call to a function whose data type is FNTYPE.
1578 For a library call, FNTYPE is 0. */
1580 #define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, FNDECL, N_NAMED_ARGS) \
1581 init_cumulative_args (&CUM, FNTYPE, LIBNAME, FALSE, FALSE, \
1582 N_NAMED_ARGS, FNDECL, VOIDmode)
1584 /* Similar, but when scanning the definition of a procedure. We always
1585 set NARGS_PROTOTYPE large so we never return an EXPR_LIST. */
1587 #define INIT_CUMULATIVE_INCOMING_ARGS(CUM, FNTYPE, LIBNAME) \
1588 init_cumulative_args (&CUM, FNTYPE, LIBNAME, TRUE, FALSE, \
1589 1000, current_function_decl, VOIDmode)
1591 /* Like INIT_CUMULATIVE_ARGS' but only used for outgoing libcalls. */
1593 #define INIT_CUMULATIVE_LIBCALL_ARGS(CUM, MODE, LIBNAME) \
1594 init_cumulative_args (&CUM, NULL_TREE, LIBNAME, FALSE, TRUE, \
1597 /* If defined, a C expression which determines whether, and in which
1598 direction, to pad out an argument with extra space. The value
1599 should be of type `enum direction': either `upward' to pad above
1600 the argument, `downward' to pad below, or `none' to inhibit
1603 #define FUNCTION_ARG_PADDING(MODE, TYPE) function_arg_padding (MODE, TYPE)
1605 #define PAD_VARARGS_DOWN \
1606 (FUNCTION_ARG_PADDING (TYPE_MODE (type), type) == downward)
1608 /* Output assembler code to FILE to increment profiler label # LABELNO
1609 for profiling a function entry. */
1611 #define FUNCTION_PROFILER(FILE, LABELNO) \
1612 output_function_profiler ((FILE), (LABELNO));
1614 /* EXIT_IGNORE_STACK should be nonzero if, when returning from a function,
1615 the stack pointer does not matter. No definition is equivalent to
1618 On the RS/6000, this is nonzero because we can restore the stack from
1619 its backpointer, which we maintain. */
1620 #define EXIT_IGNORE_STACK 1
1622 /* Define this macro as a C expression that is nonzero for registers
1623 that are used by the epilogue or the return' pattern. The stack
1624 and frame pointer registers are already be assumed to be used as
1627 #define EPILOGUE_USES(REGNO) \
1628 ((reload_completed && (REGNO) == LR_REGNO) \
1629 || (TARGET_ALTIVEC && (REGNO) == VRSAVE_REGNO) \
1630 || (crtl->calls_eh_return \
1635 /* Length in units of the trampoline for entering a nested function. */
1637 #define TRAMPOLINE_SIZE rs6000_trampoline_size ()
1639 /* Definitions for __builtin_return_address and __builtin_frame_address.
1640 __builtin_return_address (0) should give link register (65), enable
1642 /* This should be uncommented, so that the link register is used, but
1643 currently this would result in unmatched insns and spilling fixed
1644 registers so we'll leave it for another day. When these problems are
1645 taken care of one additional fetch will be necessary in RETURN_ADDR_RTX.
1647 /* #define RETURN_ADDR_IN_PREVIOUS_FRAME */
1649 /* Number of bytes into the frame return addresses can be found. See
1650 rs6000_stack_info in rs6000.c for more information on how the different
1651 abi's store the return address. */
1652 #define RETURN_ADDRESS_OFFSET \
1653 ((DEFAULT_ABI == ABI_AIX \
1654 || DEFAULT_ABI == ABI_DARWIN) ? (TARGET_32BIT ? 8 : 16) : \
1655 (DEFAULT_ABI == ABI_V4) ? 4 : \
1656 (internal_error ("RETURN_ADDRESS_OFFSET not supported"), 0))
1658 /* The current return address is in link register (65). The return address
1659 of anything farther back is accessed normally at an offset of 8 from the
1661 #define RETURN_ADDR_RTX(COUNT, FRAME) \
1662 (rs6000_return_addr (COUNT, FRAME))
1665 /* Definitions for register eliminations.
1667 We have two registers that can be eliminated on the RS/6000. First, the
1668 frame pointer register can often be eliminated in favor of the stack
1669 pointer register. Secondly, the argument pointer register can always be
1670 eliminated; it is replaced with either the stack or frame pointer.
1672 In addition, we use the elimination mechanism to see if r30 is needed
1673 Initially we assume that it isn't. If it is, we spill it. This is done
1674 by making it an eliminable register. We replace it with itself so that
1675 if it isn't needed, then existing uses won't be modified. */
1677 /* This is an array of structures. Each structure initializes one pair
1678 of eliminable registers. The "from" register number is given first,
1679 followed by "to". Eliminations of the same "from" register are listed
1680 in order of preference. */
1681 #define ELIMINABLE_REGS \
1682 {{ HARD_FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
1683 { FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
1684 { FRAME_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM}, \
1685 { ARG_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
1686 { ARG_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM}, \
1687 { RS6000_PIC_OFFSET_TABLE_REGNUM, RS6000_PIC_OFFSET_TABLE_REGNUM } }
1689 /* Define the offset between two registers, one to be eliminated, and the other
1690 its replacement, at the start of a routine. */
1691 #define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \
1692 ((OFFSET) = rs6000_initial_elimination_offset(FROM, TO))
1694 /* Addressing modes, and classification of registers for them. */
1696 #define HAVE_PRE_DECREMENT 1
1697 #define HAVE_PRE_INCREMENT 1
1698 #define HAVE_PRE_MODIFY_DISP 1
1699 #define HAVE_PRE_MODIFY_REG 1
1701 /* Macros to check register numbers against specific register classes. */
1703 /* These assume that REGNO is a hard or pseudo reg number.
1704 They give nonzero only if REGNO is a hard reg of the suitable class
1705 or a pseudo reg currently allocated to a suitable hard reg.
1706 Since they use reg_renumber, they are safe only once reg_renumber
1707 has been allocated, which happens in local-alloc.c. */
1709 #define REGNO_OK_FOR_INDEX_P(REGNO) \
1710 ((REGNO) < FIRST_PSEUDO_REGISTER \
1711 ? (REGNO) <= 31 || (REGNO) == 67 \
1712 || (REGNO) == FRAME_POINTER_REGNUM \
1713 : (reg_renumber[REGNO] >= 0 \
1714 && (reg_renumber[REGNO] <= 31 || reg_renumber[REGNO] == 67 \
1715 || reg_renumber[REGNO] == FRAME_POINTER_REGNUM)))
1717 #define REGNO_OK_FOR_BASE_P(REGNO) \
1718 ((REGNO) < FIRST_PSEUDO_REGISTER \
1719 ? ((REGNO) > 0 && (REGNO) <= 31) || (REGNO) == 67 \
1720 || (REGNO) == FRAME_POINTER_REGNUM \
1721 : (reg_renumber[REGNO] > 0 \
1722 && (reg_renumber[REGNO] <= 31 || reg_renumber[REGNO] == 67 \
1723 || reg_renumber[REGNO] == FRAME_POINTER_REGNUM)))
1725 /* Nonzero if X is a hard reg that can be used as an index
1726 or if it is a pseudo reg in the non-strict case. */
1727 #define INT_REG_OK_FOR_INDEX_P(X, STRICT) \
1728 ((!(STRICT) && REGNO (X) >= FIRST_PSEUDO_REGISTER) \
1729 || REGNO_OK_FOR_INDEX_P (REGNO (X)))
1731 /* Nonzero if X is a hard reg that can be used as a base reg
1732 or if it is a pseudo reg in the non-strict case. */
1733 #define INT_REG_OK_FOR_BASE_P(X, STRICT) \
1734 ((!(STRICT) && REGNO (X) >= FIRST_PSEUDO_REGISTER) \
1735 || REGNO_OK_FOR_BASE_P (REGNO (X)))
1738 /* Maximum number of registers that can appear in a valid memory address. */
1740 #define MAX_REGS_PER_ADDRESS 2
1742 /* Recognize any constant value that is a valid address. */
1744 #define CONSTANT_ADDRESS_P(X) \
1745 (GET_CODE (X) == LABEL_REF || GET_CODE (X) == SYMBOL_REF \
1746 || GET_CODE (X) == CONST_INT || GET_CODE (X) == CONST \
1747 || GET_CODE (X) == HIGH)
1749 /* Nonzero if the constant value X is a legitimate general operand.
1750 It is given that X satisfies CONSTANT_P or is a CONST_DOUBLE.
1752 On the RS/6000, all integer constants are acceptable, most won't be valid
1753 for particular insns, though. Only easy FP constants are
1756 #define LEGITIMATE_CONSTANT_P(X) \
1757 (((GET_CODE (X) != CONST_DOUBLE \
1758 && GET_CODE (X) != CONST_VECTOR) \
1759 || GET_MODE (X) == VOIDmode \
1760 || (TARGET_POWERPC64 && GET_MODE (X) == DImode) \
1761 || easy_fp_constant (X, GET_MODE (X)) \
1762 || easy_vector_constant (X, GET_MODE (X))) \
1763 && !rs6000_tls_referenced_p (X))
1765 #define EASY_VECTOR_15(n) ((n) >= -16 && (n) <= 15)
1766 #define EASY_VECTOR_15_ADD_SELF(n) (!EASY_VECTOR_15((n)) \
1767 && EASY_VECTOR_15((n) >> 1) \
1770 #define EASY_VECTOR_MSB(n,mode) \
1771 (((unsigned HOST_WIDE_INT)n) == \
1772 ((((unsigned HOST_WIDE_INT)GET_MODE_MASK (mode)) + 1) >> 1))
1775 /* Try a machine-dependent way of reloading an illegitimate address
1776 operand. If we find one, push the reload and jump to WIN. This
1777 macro is used in only one place: `find_reloads_address' in reload.c.
1779 Implemented on rs6000 by rs6000_legitimize_reload_address.
1780 Note that (X) is evaluated twice; this is safe in current usage. */
1782 #define LEGITIMIZE_RELOAD_ADDRESS(X,MODE,OPNUM,TYPE,IND_LEVELS,WIN) \
1785 (X) = rs6000_legitimize_reload_address_ptr ((X), (MODE), (OPNUM), \
1786 (int)(TYPE), (IND_LEVELS), &win); \
1791 #define FIND_BASE_TERM rs6000_find_base_term
1793 /* The register number of the register used to address a table of
1794 static data addresses in memory. In some cases this register is
1795 defined by a processor's "application binary interface" (ABI).
1796 When this macro is defined, RTL is generated for this register
1797 once, as with the stack pointer and frame pointer registers. If
1798 this macro is not defined, it is up to the machine-dependent files
1799 to allocate such a register (if necessary). */
1801 #define RS6000_PIC_OFFSET_TABLE_REGNUM 30
1802 #define PIC_OFFSET_TABLE_REGNUM (flag_pic ? RS6000_PIC_OFFSET_TABLE_REGNUM : INVALID_REGNUM)
1804 #define TOC_REGISTER (TARGET_MINIMAL_TOC ? RS6000_PIC_OFFSET_TABLE_REGNUM : 2)
1806 /* Define this macro if the register defined by
1807 `PIC_OFFSET_TABLE_REGNUM' is clobbered by calls. Do not define
1808 this macro if `PIC_OFFSET_TABLE_REGNUM' is not defined. */
1810 /* #define PIC_OFFSET_TABLE_REG_CALL_CLOBBERED */
1812 /* A C expression that is nonzero if X is a legitimate immediate
1813 operand on the target machine when generating position independent
1814 code. You can assume that X satisfies `CONSTANT_P', so you need
1815 not check this. You can also assume FLAG_PIC is true, so you need
1816 not check it either. You need not define this macro if all
1817 constants (including `SYMBOL_REF') can be immediate operands when
1818 generating position independent code. */
1820 /* #define LEGITIMATE_PIC_OPERAND_P (X) */
1822 /* Define this if some processing needs to be done immediately before
1823 emitting code for an insn. */
1825 #define FINAL_PRESCAN_INSN(INSN,OPERANDS,NOPERANDS) \
1826 rs6000_final_prescan_insn (INSN, OPERANDS, NOPERANDS)
1828 /* Specify the machine mode that this machine uses
1829 for the index in the tablejump instruction. */
1830 #define CASE_VECTOR_MODE SImode
1832 /* Define as C expression which evaluates to nonzero if the tablejump
1833 instruction expects the table to contain offsets from the address of the
1835 Do not define this if the table should contain absolute addresses. */
1836 #define CASE_VECTOR_PC_RELATIVE 1
1838 /* Define this as 1 if `char' should by default be signed; else as 0. */
1839 #define DEFAULT_SIGNED_CHAR 0
1841 /* This flag, if defined, says the same insns that convert to a signed fixnum
1842 also convert validly to an unsigned one. */
1844 /* #define FIXUNS_TRUNC_LIKE_FIX_TRUNC */
1846 /* An integer expression for the size in bits of the largest integer machine
1847 mode that should actually be used. */
1849 /* Allow pairs of registers to be used, which is the intent of the default. */
1850 #define MAX_FIXED_MODE_SIZE GET_MODE_BITSIZE (TARGET_POWERPC64 ? TImode : DImode)
1852 /* Max number of bytes we can move from memory to memory
1853 in one reasonably fast instruction. */
1854 #define MOVE_MAX (! TARGET_POWERPC64 ? 4 : 8)
1855 #define MAX_MOVE_MAX 8
1857 /* Nonzero if access to memory by bytes is no faster than for words.
1858 Also nonzero if doing byte operations (specifically shifts) in registers
1860 #define SLOW_BYTE_ACCESS 1
1862 /* Define if operations between registers always perform the operation
1863 on the full register even if a narrower mode is specified. */
1864 #define WORD_REGISTER_OPERATIONS
1866 /* Define if loading in MODE, an integral mode narrower than BITS_PER_WORD
1867 will either zero-extend or sign-extend. The value of this macro should
1868 be the code that says which one of the two operations is implicitly
1869 done, UNKNOWN if none. */
1870 #define LOAD_EXTEND_OP(MODE) ZERO_EXTEND
1872 /* Define if loading short immediate values into registers sign extends. */
1873 #define SHORT_IMMEDIATES_SIGN_EXTEND
1875 /* Value is 1 if truncating an integer of INPREC bits to OUTPREC bits
1876 is done just by pretending it is already truncated. */
1877 #define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) 1
1879 /* The cntlzw and cntlzd instructions return 32 and 64 for input of zero. */
1880 #define CLZ_DEFINED_VALUE_AT_ZERO(MODE, VALUE) \
1881 ((VALUE) = ((MODE) == SImode ? 32 : 64), 1)
1883 /* The CTZ patterns return -1 for input of zero. */
1884 #define CTZ_DEFINED_VALUE_AT_ZERO(MODE, VALUE) ((VALUE) = -1, 1)
1886 /* Specify the machine mode that pointers have.
1887 After generation of rtl, the compiler makes no further distinction
1888 between pointers and any other objects of this machine mode. */
1889 extern unsigned rs6000_pmode;
1890 #define Pmode ((enum machine_mode)rs6000_pmode)
1892 /* Supply definition of STACK_SIZE_MODE for allocate_dynamic_stack_space. */
1893 #define STACK_SIZE_MODE (TARGET_32BIT ? SImode : DImode)
1895 /* Mode of a function address in a call instruction (for indexing purposes).
1896 Doesn't matter on RS/6000. */
1897 #define FUNCTION_MODE SImode
1899 /* Define this if addresses of constant functions
1900 shouldn't be put through pseudo regs where they can be cse'd.
1901 Desirable on machines where ordinary constants are expensive
1902 but a CALL with constant address is cheap. */
1903 #define NO_FUNCTION_CSE
1905 /* Define this to be nonzero if shift instructions ignore all but the low-order
1908 The sle and sre instructions which allow SHIFT_COUNT_TRUNCATED
1909 have been dropped from the PowerPC architecture. */
1911 #define SHIFT_COUNT_TRUNCATED (TARGET_POWER ? 1 : 0)
1913 /* Adjust the length of an INSN. LENGTH is the currently-computed length and
1914 should be adjusted to reflect any required changes. This macro is used when
1915 there is some systematic length adjustment required that would be difficult
1916 to express in the length attribute. */
1918 /* #define ADJUST_INSN_LENGTH(X,LENGTH) */
1920 /* Given a comparison code (EQ, NE, etc.) and the first operand of a
1921 COMPARE, return the mode to be used for the comparison. For
1922 floating-point, CCFPmode should be used. CCUNSmode should be used
1923 for unsigned comparisons. CCEQmode should be used when we are
1924 doing an inequality comparison on the result of a
1925 comparison. CCmode should be used in all other cases. */
1927 #define SELECT_CC_MODE(OP,X,Y) \
1928 (SCALAR_FLOAT_MODE_P (GET_MODE (X)) ? CCFPmode \
1929 : (OP) == GTU || (OP) == LTU || (OP) == GEU || (OP) == LEU ? CCUNSmode \
1930 : (((OP) == EQ || (OP) == NE) && COMPARISON_P (X) \
1931 ? CCEQmode : CCmode))
1933 /* Can the condition code MODE be safely reversed? This is safe in
1934 all cases on this port, because at present it doesn't use the
1935 trapping FP comparisons (fcmpo). */
1936 #define REVERSIBLE_CC_MODE(MODE) 1
1938 /* Given a condition code and a mode, return the inverse condition. */
1939 #define REVERSE_CONDITION(CODE, MODE) rs6000_reverse_condition (MODE, CODE)
1942 /* Control the assembler format that we output. */
1944 /* A C string constant describing how to begin a comment in the target
1945 assembler language. The compiler assumes that the comment will end at
1946 the end of the line. */
1947 #define ASM_COMMENT_START " #"
1949 /* Flag to say the TOC is initialized */
1950 extern int toc_initialized;
1952 /* Macro to output a special constant pool entry. Go to WIN if we output
1953 it. Otherwise, it is written the usual way.
1955 On the RS/6000, toc entries are handled this way. */
1957 #define ASM_OUTPUT_SPECIAL_POOL_ENTRY(FILE, X, MODE, ALIGN, LABELNO, WIN) \
1958 { if (ASM_OUTPUT_SPECIAL_POOL_ENTRY_P (X, MODE)) \
1960 output_toc (FILE, X, LABELNO, MODE); \
1965 #ifdef HAVE_GAS_WEAK
1966 #define RS6000_WEAK 1
1968 #define RS6000_WEAK 0
1972 /* Used in lieu of ASM_WEAKEN_LABEL. */
1973 #define ASM_WEAKEN_DECL(FILE, DECL, NAME, VAL) \
1976 fputs ("\t.weak\t", (FILE)); \
1977 RS6000_OUTPUT_BASENAME ((FILE), (NAME)); \
1978 if ((DECL) && TREE_CODE (DECL) == FUNCTION_DECL \
1979 && DEFAULT_ABI == ABI_AIX && DOT_SYMBOLS) \
1982 fputs ("[DS]", (FILE)); \
1983 fputs ("\n\t.weak\t.", (FILE)); \
1984 RS6000_OUTPUT_BASENAME ((FILE), (NAME)); \
1986 fputc ('\n', (FILE)); \
1989 ASM_OUTPUT_DEF ((FILE), (NAME), (VAL)); \
1990 if ((DECL) && TREE_CODE (DECL) == FUNCTION_DECL \
1991 && DEFAULT_ABI == ABI_AIX && DOT_SYMBOLS) \
1993 fputs ("\t.set\t.", (FILE)); \
1994 RS6000_OUTPUT_BASENAME ((FILE), (NAME)); \
1995 fputs (",.", (FILE)); \
1996 RS6000_OUTPUT_BASENAME ((FILE), (VAL)); \
1997 fputc ('\n', (FILE)); \
2004 #if HAVE_GAS_WEAKREF
2005 #define ASM_OUTPUT_WEAKREF(FILE, DECL, NAME, VALUE) \
2008 fputs ("\t.weakref\t", (FILE)); \
2009 RS6000_OUTPUT_BASENAME ((FILE), (NAME)); \
2010 fputs (", ", (FILE)); \
2011 RS6000_OUTPUT_BASENAME ((FILE), (VALUE)); \
2012 if ((DECL) && TREE_CODE (DECL) == FUNCTION_DECL \
2013 && DEFAULT_ABI == ABI_AIX && DOT_SYMBOLS) \
2015 fputs ("\n\t.weakref\t.", (FILE)); \
2016 RS6000_OUTPUT_BASENAME ((FILE), (NAME)); \
2017 fputs (", .", (FILE)); \
2018 RS6000_OUTPUT_BASENAME ((FILE), (VALUE)); \
2020 fputc ('\n', (FILE)); \
2024 /* This implements the `alias' attribute. */
2025 #undef ASM_OUTPUT_DEF_FROM_DECLS
2026 #define ASM_OUTPUT_DEF_FROM_DECLS(FILE, DECL, TARGET) \
2029 const char *alias = XSTR (XEXP (DECL_RTL (DECL), 0), 0); \
2030 const char *name = IDENTIFIER_POINTER (TARGET); \
2031 if (TREE_CODE (DECL) == FUNCTION_DECL \
2032 && DEFAULT_ABI == ABI_AIX && DOT_SYMBOLS) \
2034 if (TREE_PUBLIC (DECL)) \
2036 if (!RS6000_WEAK || !DECL_WEAK (DECL)) \
2038 fputs ("\t.globl\t.", FILE); \
2039 RS6000_OUTPUT_BASENAME (FILE, alias); \
2040 putc ('\n', FILE); \
2043 else if (TARGET_XCOFF) \
2045 fputs ("\t.lglobl\t.", FILE); \
2046 RS6000_OUTPUT_BASENAME (FILE, alias); \
2047 putc ('\n', FILE); \
2049 fputs ("\t.set\t.", FILE); \
2050 RS6000_OUTPUT_BASENAME (FILE, alias); \
2051 fputs (",.", FILE); \
2052 RS6000_OUTPUT_BASENAME (FILE, name); \
2053 fputc ('\n', FILE); \
2055 ASM_OUTPUT_DEF (FILE, alias, name); \
2059 #define TARGET_ASM_FILE_START rs6000_file_start
2061 /* Output to assembler file text saying following lines
2062 may contain character constants, extra white space, comments, etc. */
2064 #define ASM_APP_ON ""
2066 /* Output to assembler file text saying following lines
2067 no longer contain unusual constructs. */
2069 #define ASM_APP_OFF ""
2071 /* How to refer to registers in assembler output.
2072 This sequence is indexed by compiler's hard-register-number (see above). */
2074 extern char rs6000_reg_names[][8]; /* register names (0 vs. %r0). */
2076 #define REGISTER_NAMES \
2078 &rs6000_reg_names[ 0][0], /* r0 */ \
2079 &rs6000_reg_names[ 1][0], /* r1 */ \
2080 &rs6000_reg_names[ 2][0], /* r2 */ \
2081 &rs6000_reg_names[ 3][0], /* r3 */ \
2082 &rs6000_reg_names[ 4][0], /* r4 */ \
2083 &rs6000_reg_names[ 5][0], /* r5 */ \
2084 &rs6000_reg_names[ 6][0], /* r6 */ \
2085 &rs6000_reg_names[ 7][0], /* r7 */ \
2086 &rs6000_reg_names[ 8][0], /* r8 */ \
2087 &rs6000_reg_names[ 9][0], /* r9 */ \
2088 &rs6000_reg_names[10][0], /* r10 */ \
2089 &rs6000_reg_names[11][0], /* r11 */ \
2090 &rs6000_reg_names[12][0], /* r12 */ \
2091 &rs6000_reg_names[13][0], /* r13 */ \
2092 &rs6000_reg_names[14][0], /* r14 */ \
2093 &rs6000_reg_names[15][0], /* r15 */ \
2094 &rs6000_reg_names[16][0], /* r16 */ \
2095 &rs6000_reg_names[17][0], /* r17 */ \
2096 &rs6000_reg_names[18][0], /* r18 */ \
2097 &rs6000_reg_names[19][0], /* r19 */ \
2098 &rs6000_reg_names[20][0], /* r20 */ \
2099 &rs6000_reg_names[21][0], /* r21 */ \
2100 &rs6000_reg_names[22][0], /* r22 */ \
2101 &rs6000_reg_names[23][0], /* r23 */ \
2102 &rs6000_reg_names[24][0], /* r24 */ \
2103 &rs6000_reg_names[25][0], /* r25 */ \
2104 &rs6000_reg_names[26][0], /* r26 */ \
2105 &rs6000_reg_names[27][0], /* r27 */ \
2106 &rs6000_reg_names[28][0], /* r28 */ \
2107 &rs6000_reg_names[29][0], /* r29 */ \
2108 &rs6000_reg_names[30][0], /* r30 */ \
2109 &rs6000_reg_names[31][0], /* r31 */ \
2111 &rs6000_reg_names[32][0], /* fr0 */ \
2112 &rs6000_reg_names[33][0], /* fr1 */ \
2113 &rs6000_reg_names[34][0], /* fr2 */ \
2114 &rs6000_reg_names[35][0], /* fr3 */ \
2115 &rs6000_reg_names[36][0], /* fr4 */ \
2116 &rs6000_reg_names[37][0], /* fr5 */ \
2117 &rs6000_reg_names[38][0], /* fr6 */ \
2118 &rs6000_reg_names[39][0], /* fr7 */ \
2119 &rs6000_reg_names[40][0], /* fr8 */ \
2120 &rs6000_reg_names[41][0], /* fr9 */ \
2121 &rs6000_reg_names[42][0], /* fr10 */ \
2122 &rs6000_reg_names[43][0], /* fr11 */ \
2123 &rs6000_reg_names[44][0], /* fr12 */ \
2124 &rs6000_reg_names[45][0], /* fr13 */ \
2125 &rs6000_reg_names[46][0], /* fr14 */ \
2126 &rs6000_reg_names[47][0], /* fr15 */ \
2127 &rs6000_reg_names[48][0], /* fr16 */ \
2128 &rs6000_reg_names[49][0], /* fr17 */ \
2129 &rs6000_reg_names[50][0], /* fr18 */ \
2130 &rs6000_reg_names[51][0], /* fr19 */ \
2131 &rs6000_reg_names[52][0], /* fr20 */ \
2132 &rs6000_reg_names[53][0], /* fr21 */ \
2133 &rs6000_reg_names[54][0], /* fr22 */ \
2134 &rs6000_reg_names[55][0], /* fr23 */ \
2135 &rs6000_reg_names[56][0], /* fr24 */ \
2136 &rs6000_reg_names[57][0], /* fr25 */ \
2137 &rs6000_reg_names[58][0], /* fr26 */ \
2138 &rs6000_reg_names[59][0], /* fr27 */ \
2139 &rs6000_reg_names[60][0], /* fr28 */ \
2140 &rs6000_reg_names[61][0], /* fr29 */ \
2141 &rs6000_reg_names[62][0], /* fr30 */ \
2142 &rs6000_reg_names[63][0], /* fr31 */ \
2144 &rs6000_reg_names[64][0], /* mq */ \
2145 &rs6000_reg_names[65][0], /* lr */ \
2146 &rs6000_reg_names[66][0], /* ctr */ \
2147 &rs6000_reg_names[67][0], /* ap */ \
2149 &rs6000_reg_names[68][0], /* cr0 */ \
2150 &rs6000_reg_names[69][0], /* cr1 */ \
2151 &rs6000_reg_names[70][0], /* cr2 */ \
2152 &rs6000_reg_names[71][0], /* cr3 */ \
2153 &rs6000_reg_names[72][0], /* cr4 */ \
2154 &rs6000_reg_names[73][0], /* cr5 */ \
2155 &rs6000_reg_names[74][0], /* cr6 */ \
2156 &rs6000_reg_names[75][0], /* cr7 */ \
2158 &rs6000_reg_names[76][0], /* ca */ \
2160 &rs6000_reg_names[77][0], /* v0 */ \
2161 &rs6000_reg_names[78][0], /* v1 */ \
2162 &rs6000_reg_names[79][0], /* v2 */ \
2163 &rs6000_reg_names[80][0], /* v3 */ \
2164 &rs6000_reg_names[81][0], /* v4 */ \
2165 &rs6000_reg_names[82][0], /* v5 */ \
2166 &rs6000_reg_names[83][0], /* v6 */ \
2167 &rs6000_reg_names[84][0], /* v7 */ \
2168 &rs6000_reg_names[85][0], /* v8 */ \
2169 &rs6000_reg_names[86][0], /* v9 */ \
2170 &rs6000_reg_names[87][0], /* v10 */ \
2171 &rs6000_reg_names[88][0], /* v11 */ \
2172 &rs6000_reg_names[89][0], /* v12 */ \
2173 &rs6000_reg_names[90][0], /* v13 */ \
2174 &rs6000_reg_names[91][0], /* v14 */ \
2175 &rs6000_reg_names[92][0], /* v15 */ \
2176 &rs6000_reg_names[93][0], /* v16 */ \
2177 &rs6000_reg_names[94][0], /* v17 */ \
2178 &rs6000_reg_names[95][0], /* v18 */ \
2179 &rs6000_reg_names[96][0], /* v19 */ \
2180 &rs6000_reg_names[97][0], /* v20 */ \
2181 &rs6000_reg_names[98][0], /* v21 */ \
2182 &rs6000_reg_names[99][0], /* v22 */ \
2183 &rs6000_reg_names[100][0], /* v23 */ \
2184 &rs6000_reg_names[101][0], /* v24 */ \
2185 &rs6000_reg_names[102][0], /* v25 */ \
2186 &rs6000_reg_names[103][0], /* v26 */ \
2187 &rs6000_reg_names[104][0], /* v27 */ \
2188 &rs6000_reg_names[105][0], /* v28 */ \
2189 &rs6000_reg_names[106][0], /* v29 */ \
2190 &rs6000_reg_names[107][0], /* v30 */ \
2191 &rs6000_reg_names[108][0], /* v31 */ \
2192 &rs6000_reg_names[109][0], /* vrsave */ \
2193 &rs6000_reg_names[110][0], /* vscr */ \
2194 &rs6000_reg_names[111][0], /* spe_acc */ \
2195 &rs6000_reg_names[112][0], /* spefscr */ \
2196 &rs6000_reg_names[113][0], /* sfp */ \
2199 /* Table of additional register names to use in user input. */
2201 #define ADDITIONAL_REGISTER_NAMES \
2202 {{"r0", 0}, {"r1", 1}, {"r2", 2}, {"r3", 3}, \
2203 {"r4", 4}, {"r5", 5}, {"r6", 6}, {"r7", 7}, \
2204 {"r8", 8}, {"r9", 9}, {"r10", 10}, {"r11", 11}, \
2205 {"r12", 12}, {"r13", 13}, {"r14", 14}, {"r15", 15}, \
2206 {"r16", 16}, {"r17", 17}, {"r18", 18}, {"r19", 19}, \
2207 {"r20", 20}, {"r21", 21}, {"r22", 22}, {"r23", 23}, \
2208 {"r24", 24}, {"r25", 25}, {"r26", 26}, {"r27", 27}, \
2209 {"r28", 28}, {"r29", 29}, {"r30", 30}, {"r31", 31}, \
2210 {"fr0", 32}, {"fr1", 33}, {"fr2", 34}, {"fr3", 35}, \
2211 {"fr4", 36}, {"fr5", 37}, {"fr6", 38}, {"fr7", 39}, \
2212 {"fr8", 40}, {"fr9", 41}, {"fr10", 42}, {"fr11", 43}, \
2213 {"fr12", 44}, {"fr13", 45}, {"fr14", 46}, {"fr15", 47}, \
2214 {"fr16", 48}, {"fr17", 49}, {"fr18", 50}, {"fr19", 51}, \
2215 {"fr20", 52}, {"fr21", 53}, {"fr22", 54}, {"fr23", 55}, \
2216 {"fr24", 56}, {"fr25", 57}, {"fr26", 58}, {"fr27", 59}, \
2217 {"fr28", 60}, {"fr29", 61}, {"fr30", 62}, {"fr31", 63}, \
2218 {"v0", 77}, {"v1", 78}, {"v2", 79}, {"v3", 80}, \
2219 {"v4", 81}, {"v5", 82}, {"v6", 83}, {"v7", 84}, \
2220 {"v8", 85}, {"v9", 86}, {"v10", 87}, {"v11", 88}, \
2221 {"v12", 89}, {"v13", 90}, {"v14", 91}, {"v15", 92}, \
2222 {"v16", 93}, {"v17", 94}, {"v18", 95}, {"v19", 96}, \
2223 {"v20", 97}, {"v21", 98}, {"v22", 99}, {"v23", 100}, \
2224 {"v24", 101},{"v25", 102},{"v26", 103},{"v27", 104}, \
2225 {"v28", 105},{"v29", 106},{"v30", 107},{"v31", 108}, \
2226 {"vrsave", 109}, {"vscr", 110}, \
2227 {"spe_acc", 111}, {"spefscr", 112}, \
2228 /* no additional names for: mq, lr, ctr, ap */ \
2229 {"cr0", 68}, {"cr1", 69}, {"cr2", 70}, {"cr3", 71}, \
2230 {"cr4", 72}, {"cr5", 73}, {"cr6", 74}, {"cr7", 75}, \
2231 {"cc", 68}, {"sp", 1}, {"toc", 2}, \
2232 /* CA is only part of XER, but we do not model the other parts (yet). */ \
2234 /* VSX registers overlaid on top of FR, Altivec registers */ \
2235 {"vs0", 32}, {"vs1", 33}, {"vs2", 34}, {"vs3", 35}, \
2236 {"vs4", 36}, {"vs5", 37}, {"vs6", 38}, {"vs7", 39}, \
2237 {"vs8", 40}, {"vs9", 41}, {"vs10", 42}, {"vs11", 43}, \
2238 {"vs12", 44}, {"vs13", 45}, {"vs14", 46}, {"vs15", 47}, \
2239 {"vs16", 48}, {"vs17", 49}, {"vs18", 50}, {"vs19", 51}, \
2240 {"vs20", 52}, {"vs21", 53}, {"vs22", 54}, {"vs23", 55}, \
2241 {"vs24", 56}, {"vs25", 57}, {"vs26", 58}, {"vs27", 59}, \
2242 {"vs28", 60}, {"vs29", 61}, {"vs30", 62}, {"vs31", 63}, \
2243 {"vs32", 77}, {"vs33", 78}, {"vs34", 79}, {"vs35", 80}, \
2244 {"vs36", 81}, {"vs37", 82}, {"vs38", 83}, {"vs39", 84}, \
2245 {"vs40", 85}, {"vs41", 86}, {"vs42", 87}, {"vs43", 88}, \
2246 {"vs44", 89}, {"vs45", 90}, {"vs46", 91}, {"vs47", 92}, \
2247 {"vs48", 93}, {"vs49", 94}, {"vs50", 95}, {"vs51", 96}, \
2248 {"vs52", 97}, {"vs53", 98}, {"vs54", 99}, {"vs55", 100}, \
2249 {"vs56", 101},{"vs57", 102},{"vs58", 103},{"vs59", 104}, \
2250 {"vs60", 105},{"vs61", 106},{"vs62", 107},{"vs63", 108} }
2252 /* Text to write out after a CALL that may be replaced by glue code by
2253 the loader. This depends on the AIX version. */
2254 #define RS6000_CALL_GLUE "cror 31,31,31"
2256 /* This is how to output an element of a case-vector that is relative. */
2258 #define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, BODY, VALUE, REL) \
2259 do { char buf[100]; \
2260 fputs ("\t.long ", FILE); \
2261 ASM_GENERATE_INTERNAL_LABEL (buf, "L", VALUE); \
2262 assemble_name (FILE, buf); \
2264 ASM_GENERATE_INTERNAL_LABEL (buf, "L", REL); \
2265 assemble_name (FILE, buf); \
2266 putc ('\n', FILE); \
2269 /* This is how to output an assembler line
2270 that says to advance the location counter
2271 to a multiple of 2**LOG bytes. */
2273 #define ASM_OUTPUT_ALIGN(FILE,LOG) \
2275 fprintf (FILE, "\t.align %d\n", (LOG))
2277 /* How to align the given loop. */
2278 #define LOOP_ALIGN(LABEL) rs6000_loop_align(LABEL)
2280 /* Pick up the return address upon entry to a procedure. Used for
2281 dwarf2 unwind information. This also enables the table driven
2284 #define INCOMING_RETURN_ADDR_RTX gen_rtx_REG (Pmode, LR_REGNO)
2285 #define DWARF_FRAME_RETURN_COLUMN DWARF_FRAME_REGNUM (LR_REGNO)
2287 /* Describe how we implement __builtin_eh_return. */
2288 #define EH_RETURN_DATA_REGNO(N) ((N) < 4 ? (N) + 3 : INVALID_REGNUM)
2289 #define EH_RETURN_STACKADJ_RTX gen_rtx_REG (Pmode, 10)
2291 /* Print operand X (an rtx) in assembler syntax to file FILE.
2292 CODE is a letter or dot (`z' in `%z0') or 0 if no letter was specified.
2293 For `%' followed by punctuation, CODE is the punctuation and X is null. */
2295 #define PRINT_OPERAND(FILE, X, CODE) print_operand (FILE, X, CODE)
2297 /* Define which CODE values are valid. */
2299 #define PRINT_OPERAND_PUNCT_VALID_P(CODE) \
2300 ((CODE) == '.' || (CODE) == '&')
2302 /* Print a memory address as an operand to reference that memory location. */
2304 #define PRINT_OPERAND_ADDRESS(FILE, ADDR) print_operand_address (FILE, ADDR)
2306 /* uncomment for disabling the corresponding default options */
2307 /* #define MACHINE_no_sched_interblock */
2308 /* #define MACHINE_no_sched_speculative */
2309 /* #define MACHINE_no_sched_speculative_load */
2311 /* General flags. */
2312 extern int frame_pointer_needed;
2314 /* Classification of the builtin functions to properly set the declaration tree
2318 RS6000_BTC_MISC, /* assume builtin can do anything */
2319 RS6000_BTC_CONST, /* builtin is a 'const' function. */
2320 RS6000_BTC_PURE, /* builtin is a 'pure' function. */
2321 RS6000_BTC_FP_PURE /* builtin is 'pure' if rounding math. */
2324 /* Convenience macros to document the instruction type. */
2325 #define RS6000_BTC_MEM RS6000_BTC_MISC /* load/store touches memory */
2326 #define RS6000_BTC_SAT RS6000_BTC_MISC /* VMX saturate sets VSCR register */
2328 #undef RS6000_BUILTIN
2329 #undef RS6000_BUILTIN_EQUATE
2330 #define RS6000_BUILTIN(NAME, TYPE) NAME,
2331 #define RS6000_BUILTIN_EQUATE(NAME, VALUE) NAME = VALUE,
2333 enum rs6000_builtins
2335 #include "rs6000-builtin.def"
2337 RS6000_BUILTIN_COUNT
2340 #undef RS6000_BUILTIN
2341 #undef RS6000_BUILTIN_EQUATE
2343 enum rs6000_builtin_type_index
2345 RS6000_BTI_NOT_OPAQUE,
2346 RS6000_BTI_opaque_V2SI,
2347 RS6000_BTI_opaque_V2SF,
2348 RS6000_BTI_opaque_p_V2SI,
2349 RS6000_BTI_opaque_V4SI,
2359 RS6000_BTI_unsigned_V16QI,
2360 RS6000_BTI_unsigned_V8HI,
2361 RS6000_BTI_unsigned_V4SI,
2362 RS6000_BTI_unsigned_V2DI,
2363 RS6000_BTI_bool_char, /* __bool char */
2364 RS6000_BTI_bool_short, /* __bool short */
2365 RS6000_BTI_bool_int, /* __bool int */
2366 RS6000_BTI_bool_long, /* __bool long */
2367 RS6000_BTI_pixel, /* __pixel */
2368 RS6000_BTI_bool_V16QI, /* __vector __bool char */
2369 RS6000_BTI_bool_V8HI, /* __vector __bool short */
2370 RS6000_BTI_bool_V4SI, /* __vector __bool int */
2371 RS6000_BTI_bool_V2DI, /* __vector __bool long */
2372 RS6000_BTI_pixel_V8HI, /* __vector __pixel */
2373 RS6000_BTI_long, /* long_integer_type_node */
2374 RS6000_BTI_unsigned_long, /* long_unsigned_type_node */
2375 RS6000_BTI_long_long, /* long_long_integer_type_node */
2376 RS6000_BTI_unsigned_long_long, /* long_long_unsigned_type_node */
2377 RS6000_BTI_INTQI, /* intQI_type_node */
2378 RS6000_BTI_UINTQI, /* unsigned_intQI_type_node */
2379 RS6000_BTI_INTHI, /* intHI_type_node */
2380 RS6000_BTI_UINTHI, /* unsigned_intHI_type_node */
2381 RS6000_BTI_INTSI, /* intSI_type_node */
2382 RS6000_BTI_UINTSI, /* unsigned_intSI_type_node */
2383 RS6000_BTI_INTDI, /* intDI_type_node */
2384 RS6000_BTI_UINTDI, /* unsigned_intDI_type_node */
2385 RS6000_BTI_float, /* float_type_node */
2386 RS6000_BTI_double, /* double_type_node */
2387 RS6000_BTI_void, /* void_type_node */
2392 #define opaque_V2SI_type_node (rs6000_builtin_types[RS6000_BTI_opaque_V2SI])
2393 #define opaque_V2SF_type_node (rs6000_builtin_types[RS6000_BTI_opaque_V2SF])
2394 #define opaque_p_V2SI_type_node (rs6000_builtin_types[RS6000_BTI_opaque_p_V2SI])
2395 #define opaque_V4SI_type_node (rs6000_builtin_types[RS6000_BTI_opaque_V4SI])
2396 #define V16QI_type_node (rs6000_builtin_types[RS6000_BTI_V16QI])
2397 #define V2DI_type_node (rs6000_builtin_types[RS6000_BTI_V2DI])
2398 #define V2DF_type_node (rs6000_builtin_types[RS6000_BTI_V2DF])
2399 #define V2SI_type_node (rs6000_builtin_types[RS6000_BTI_V2SI])
2400 #define V2SF_type_node (rs6000_builtin_types[RS6000_BTI_V2SF])
2401 #define V4HI_type_node (rs6000_builtin_types[RS6000_BTI_V4HI])
2402 #define V4SI_type_node (rs6000_builtin_types[RS6000_BTI_V4SI])
2403 #define V4SF_type_node (rs6000_builtin_types[RS6000_BTI_V4SF])
2404 #define V8HI_type_node (rs6000_builtin_types[RS6000_BTI_V8HI])
2405 #define unsigned_V16QI_type_node (rs6000_builtin_types[RS6000_BTI_unsigned_V16QI])
2406 #define unsigned_V8HI_type_node (rs6000_builtin_types[RS6000_BTI_unsigned_V8HI])
2407 #define unsigned_V4SI_type_node (rs6000_builtin_types[RS6000_BTI_unsigned_V4SI])
2408 #define unsigned_V2DI_type_node (rs6000_builtin_types[RS6000_BTI_unsigned_V2DI])
2409 #define bool_char_type_node (rs6000_builtin_types[RS6000_BTI_bool_char])
2410 #define bool_short_type_node (rs6000_builtin_types[RS6000_BTI_bool_short])
2411 #define bool_int_type_node (rs6000_builtin_types[RS6000_BTI_bool_int])
2412 #define bool_long_type_node (rs6000_builtin_types[RS6000_BTI_bool_long])
2413 #define pixel_type_node (rs6000_builtin_types[RS6000_BTI_pixel])
2414 #define bool_V16QI_type_node (rs6000_builtin_types[RS6000_BTI_bool_V16QI])
2415 #define bool_V8HI_type_node (rs6000_builtin_types[RS6000_BTI_bool_V8HI])
2416 #define bool_V4SI_type_node (rs6000_builtin_types[RS6000_BTI_bool_V4SI])
2417 #define bool_V2DI_type_node (rs6000_builtin_types[RS6000_BTI_bool_V2DI])
2418 #define pixel_V8HI_type_node (rs6000_builtin_types[RS6000_BTI_pixel_V8HI])
2420 #define long_long_integer_type_internal_node (rs6000_builtin_types[RS6000_BTI_long_long])
2421 #define long_long_unsigned_type_internal_node (rs6000_builtin_types[RS6000_BTI_unsigned_long_long])
2422 #define long_integer_type_internal_node (rs6000_builtin_types[RS6000_BTI_long])
2423 #define long_unsigned_type_internal_node (rs6000_builtin_types[RS6000_BTI_unsigned_long])
2424 #define intQI_type_internal_node (rs6000_builtin_types[RS6000_BTI_INTQI])
2425 #define uintQI_type_internal_node (rs6000_builtin_types[RS6000_BTI_UINTQI])
2426 #define intHI_type_internal_node (rs6000_builtin_types[RS6000_BTI_INTHI])
2427 #define uintHI_type_internal_node (rs6000_builtin_types[RS6000_BTI_UINTHI])
2428 #define intSI_type_internal_node (rs6000_builtin_types[RS6000_BTI_INTSI])
2429 #define uintSI_type_internal_node (rs6000_builtin_types[RS6000_BTI_UINTSI])
2430 #define intDI_type_internal_node (rs6000_builtin_types[RS6000_BTI_INTDI])
2431 #define uintDI_type_internal_node (rs6000_builtin_types[RS6000_BTI_UINTDI])
2432 #define float_type_internal_node (rs6000_builtin_types[RS6000_BTI_float])
2433 #define double_type_internal_node (rs6000_builtin_types[RS6000_BTI_double])
2434 #define void_type_internal_node (rs6000_builtin_types[RS6000_BTI_void])
2436 extern GTY(()) tree rs6000_builtin_types[RS6000_BTI_MAX];
2437 extern GTY(()) tree rs6000_builtin_decls[RS6000_BUILTIN_COUNT];