gcc/config/ia64/sysv4.h

   1 /* Override definitions in elfos.h/svr4.h to be correct for IA64.  */
   2
   3 /* We want DWARF2 as specified by the IA64 ABI.  */
   4 #undef PREFERRED_DEBUGGING_TYPE
   5 #define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG
   6
   7 /* Various pseudo-ops for which the Intel assembler uses non-standard
   8    definitions.  */
   9
  10 #undef ASM_BYTE_OP
  11 #define ASM_BYTE_OP "data1"
  12
  13 #undef STRING_ASM_OP
  14 #define STRING_ASM_OP "stringz"
  15
  16 #undef SKIP_ASM_OP
  17 #define SKIP_ASM_OP ".skip"
  18
  19 #undef COMMON_ASM_OP
  20 #define COMMON_ASM_OP ".common"
  21
  22 #undef ASCII_DATA_ASM_OP
  23 #define ASCII_DATA_ASM_OP "string"
  24
  25 /* ??? Unfortunately, .lcomm doesn't work, because it puts things in either
  26    .bss or .sbss, and we can't control the decision of which is used.  When
  27    I use .lcomm, I get a cryptic "Section group has no member" error from
  28    the Intel simulator.  So we must explicitly put variables in .bss
  29    instead.  This matters only if we care about the Intel assembler.  */
  30
  31 /* This is asm_output_aligned_bss from varasm.c without the ASM_GLOBALIZE_LABEL
  32    call at the beginning.  */
  33
  34 /* This is for final.c, because it is used by ASM_DECLARE_OBJECT_NAME.  */
  35 extern int size_directive_output;
  36
  37 #undef ASM_OUTPUT_ALIGNED_LOCAL
  38 #define ASM_OUTPUT_ALIGNED_DECL_LOCAL(FILE, DECL, NAME, SIZE, ALIGN) \
  39 do {                                                                    \
  40   if (XSTR (XEXP (DECL_RTL (DECL), 0), 0)[0] == SDATA_NAME_FLAG_CHAR)   \
  41     sbss_section ();                                                    \
  42   else                                                                  \
  43     bss_section ();                                                     \
  44   ASM_OUTPUT_ALIGN (FILE, floor_log2 ((ALIGN) / BITS_PER_UNIT));        \
  45   ASM_DECLARE_OBJECT_NAME (FILE, NAME, DECL);                           \
  46   ASM_OUTPUT_SKIP (FILE, SIZE ? SIZE : 1);                              \
  47 } while (0)
  48
  49 /* ??? Intel assembler does not allow "." in section names, so turn off
  50    gnu.linkonce section support, but only when using the Intel assembler.  */
  51 #undef UNIQUE_SECTION_P
  52 #define UNIQUE_SECTION_P(DECL) (TARGET_GNU_AS ? DECL_ONE_ONLY (DECL) : 0)
  53
  54 /* The # tells the Intel assembler that this is not a register name.
  55    However, we can't emit the # in a label definition, so we set a variable
  56    in ASM_OUTPUT_LABEL to control whether we want the postfix here or not.  */
  57
  58 #undef ASM_OUTPUT_LABELREF
  59 #define ASM_OUTPUT_LABELREF(STREAM, NAME) \
  60 do                                                                      \
  61   {                                                                     \
  62     const char *real_name;                                              \
  63     STRIP_NAME_ENCODING (real_name, NAME);                              \
  64     asm_fprintf (STREAM, "%U%s%s", real_name,                           \
  65                  (ia64_asm_output_label ? "" : "#"));                   \
  66   }                                                                     \
  67 while (0)
  68
  69 /* Intel assembler requires both flags and type if declaring a non-predefined
  70    section.  */
  71 #undef INIT_SECTION_ASM_OP
  72 #define INIT_SECTION_ASM_OP     ".section\t.init,\"ax\",\"progbits\""
  73 #undef FINI_SECTION_ASM_OP
  74 #define FINI_SECTION_ASM_OP     ".section\t.fini,\"ax\",\"progbits\""
  75 #undef CTORS_SECTION_ASM_OP
  76 #define CTORS_SECTION_ASM_OP    ".section\t.ctors,\"aw\",\"progbits\""
  77 #undef DTORS_SECTION_ASM_OP
  78 #define DTORS_SECTION_ASM_OP    ".section\t.dtors,\"aw\",\"progbits\""
  79
  80 /* A C statement (sans semicolon) to output an element in the table of
  81    global constructors.  */
  82 /* Must override this to get @fptr relocation.  */
  83 #undef ASM_OUTPUT_CONSTRUCTOR
  84 #define ASM_OUTPUT_CONSTRUCTOR(FILE,NAME)                               \
  85   do {                                                                  \
  86     ctors_section ();                                                   \
  87     if (TARGET_NO_PIC || TARGET_AUTO_PIC)                               \
  88       fputs ("\tdata8\t ", FILE);                                       \
  89     else                                                                \
  90       fputs ("\tdata8\t @fptr(", FILE);                                 \
  91     assemble_name (FILE, NAME);                                         \
  92     if (TARGET_NO_PIC || TARGET_AUTO_PIC)                               \
  93       fputs ("\n", FILE);                                               \
  94     else                                                                \
  95       fputs (")\n", FILE);                                              \
  96   } while (0)
  97
  98 /* A C statement (sans semicolon) to output an element in the table of
  99    global destructors.  */
 100 /* Must override this to get @fptr relocation.  */
 101 #undef ASM_OUTPUT_DESTRUCTOR
 102 #define ASM_OUTPUT_DESTRUCTOR(FILE,NAME)                                \
 103   do {                                                                  \
 104     dtors_section ();                                                   \
 105     if (TARGET_NO_PIC || TARGET_AUTO_PIC)                               \
 106       fputs ("\tdata8\t ", FILE);                                       \
 107     else                                                                \
 108       fputs ("\tdata8\t @fptr(", FILE);                                 \
 109     assemble_name (FILE, NAME);                                         \
 110     if (TARGET_NO_PIC || TARGET_AUTO_PIC)                               \
 111       fputs ("\n", FILE);                                               \
 112     else                                                                \
 113       fputs (")\n", FILE);                                              \
 114   } while (0)
 115
 116 /* svr4.h undefines this, so we need to define it here.  */
 117 #define DBX_REGISTER_NUMBER(REGNO)                                      \
 118   (IN_REGNO_P (REGNO) ? (32 + (REGNO) - IN_REG (0))                     \
 119    : LOC_REGNO_P (REGNO) ? (32 + ia64_input_regs +                      \
 120                             (REGNO) - LOC_REG (0))                      \
 121    : OUT_REGNO_P (REGNO) ? (32 + ia64_input_regs + ia64_local_regs      \
 122                             + (REGNO) - OUT_REG (0))                    \
 123    : (REGNO) == FRAME_POINTER_REGNUM ? ia64_fp_regno                    \
 124    : (REGNO))
 125
 126 /* Things that svr4.h defines to the wrong type, because it assumes 32 bit
 127    ints and 32 bit longs.  */
 128
 129 #undef SIZE_TYPE
 130 #define SIZE_TYPE "long unsigned int"
 131
 132 #undef PTRDIFF_TYPE
 133 #define PTRDIFF_TYPE "long int"
 134
 135 #undef WCHAR_TYPE
 136 #define WCHAR_TYPE "int"
 137
 138 #undef WCHAR_TYPE_SIZE
 139 #define WCHAR_TYPE_SIZE 32
 140
 141 /* We don't want any symbol at the beginning of the file.  This is defined in
 142    dbxelf.h which is included from elfos.h, so we need to undef/define it
 143    here.  */
 144
 145 #undef ASM_IDENTIFY_GCC
 146 #define ASM_IDENTIFY_GCC(FILE)
 147
 148 /* We redefine this to use the ia64 .proc pseudo-op.  */
 149
 150 #undef ASM_DECLARE_FUNCTION_NAME
 151 #define ASM_DECLARE_FUNCTION_NAME(FILE, NAME, DECL) \
 152 do {                                                                    \
 153   fputs ("\t.proc ", FILE);                                             \
 154   assemble_name (FILE, NAME);                                           \
 155   fputc ('\n', FILE);                                                   \
 156   ASM_OUTPUT_LABEL (FILE, NAME);                                        \
 157 } while (0)
 158
 159 /* We redefine this to use the ia64 .endp pseudo-op.  */
 160
 161 #undef ASM_DECLARE_FUNCTION_SIZE
 162 #define ASM_DECLARE_FUNCTION_SIZE(FILE, NAME, DECL) \
 163 do {                                                                    \
 164   fputs ("\t.endp ", FILE);                                             \
 165   assemble_name (FILE, NAME);                                           \
 166   fputc ('\n', FILE);                                                   \
 167 } while (0)
 168
 169 /* A C expression which outputs to the stdio stream STREAM some appropriate
 170    text to go at the start of an assembler file.  */
 171
 172 /* ??? Looks like almost every port, except for a few original ones, get this
 173    wrong.  Must emit #NO_APP as first line of file to turn of special assembler
 174    preprocessing of files.  */
 175
 176 /* ??? Even worse, it doesn't work, because gas does not accept the tab chars
 177    that dwarf2out.c emits when #NO_APP.  */
 178
 179 /* ??? Unrelated, but dwarf2out.c emits unnecessary newlines after strings,
 180    may as well fix at the same time.  */
 181
 182 #if 0
 183 #undef ASM_FILE_START
 184 #define ASM_FILE_START(STREAM) \
 185 do {                                                                    \
 186   fputs (ASM_APP_OFF, STREAM);                                          \
 187   output_file_directive (STREAM, main_input_filename);                  \
 188 } while (0)
 189 #endif
 190
 191 /* Case label alignment is handled by ADDR_VEC_ALIGN now.  */
 192
 193 #undef ASM_OUTPUT_BEFORE_CASE_LABEL
 194 #define ASM_OUTPUT_BEFORE_CASE_LABEL(FILE,PREFIX,NUM,TABLE)
 195
 196 /* We override svr4.h so that we can support the sdata section.  */
 197
 198 #undef SELECT_SECTION
 199 #define SELECT_SECTION(DECL,RELOC)                                      \
 200 {                                                                       \
 201   if (TREE_CODE (DECL) == STRING_CST)                                   \
 202     {                                                                   \
 203       if (! flag_writable_strings)                                      \
 204         const_section ();                                               \
 205       else                                                              \
 206         data_section ();                                                \
 207     }                                                                   \
 208   else if (TREE_CODE (DECL) == VAR_DECL)                                \
 209     {                                                                   \
 210       if (XSTR (XEXP (DECL_RTL (DECL), 0), 0)[0]                        \
 211           == SDATA_NAME_FLAG_CHAR)                                      \
 212         sdata_section ();                                               \
 213       /* ??? We need the extra ! RELOC check, because the default is to \
 214          only check RELOC if flag_pic is set, and we don't set flag_pic \
 215          (yet?).  */                                                    \
 216       else if (DECL_READONLY_SECTION (DECL, RELOC) && ! (RELOC))        \
 217         const_section ();                                               \
 218       else                                                              \
 219         data_section ();                                                \
 220     }                                                                   \
 221   /* This could be a CONSTRUCTOR containing ADDR_EXPR of a VAR_DECL,    \
 222      in which case we can't put it in a shared library rodata.  */      \
 223   else if (flag_pic && (RELOC))                                         \
 224     data_section ();                                                    \
 225   else                                                                  \
 226     const_section ();                                                   \
 227 }
 228
 229 #undef EXTRA_SECTIONS
 230 #define EXTRA_SECTIONS in_const, in_ctors, in_dtors, in_sdata, in_sbss
 231
 232 #undef EXTRA_SECTION_FUNCTIONS
 233 #define EXTRA_SECTION_FUNCTIONS                                         \
 234   CONST_SECTION_FUNCTION                                                \
 235   CTORS_SECTION_FUNCTION                                                \
 236   DTORS_SECTION_FUNCTION                                                \
 237   SDATA_SECTION_FUNCTION                                                \
 238   SBSS_SECTION_FUNCTION
 239
 240 #define SDATA_SECTION_ASM_OP ".sdata"
 241
 242 #define SDATA_SECTION_FUNCTION                                          \
 243 void                                                                    \
 244 sdata_section ()                                                        \
 245 {                                                                       \
 246   if (in_section != in_sdata)                                           \
 247     {                                                                   \
 248       fprintf (asm_out_file, "%s\n", SDATA_SECTION_ASM_OP);             \
 249       in_section = in_sdata;                                            \
 250     }                                                                   \
 251 }
 252
 253 #define SBSS_SECTION_ASM_OP ".sbss"
 254
 255 #define SBSS_SECTION_FUNCTION                                           \
 256 void                                                                    \
 257 sbss_section ()                                                         \
 258 {                                                                       \
 259   if (in_section != in_sbss)                                            \
 260     {                                                                   \
 261       fprintf (asm_out_file, "%s\n", SBSS_SECTION_ASM_OP);              \
 262       in_section = in_sbss;                                             \
 263     }                                                                   \
 264 }