1 /* Definitions of target machine for GNU compiler, for DEC Alpha.
2 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
3 2000 Free Software Foundation, Inc.
4 Contributed by Richard Kenner (kenner@vlsi1.ultra.nyu.edu)
6 This file is part of GNU CC.
8 GNU CC is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 2, or (at your option)
13 GNU CC is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with GNU CC; see the file COPYING. If not, write to
20 the Free Software Foundation, 59 Temple Place - Suite 330,
21 Boston, MA 02111-1307, USA. */
24 /* Write out the correct language type definition for the header files.
25 Unless we have assembler language, write out the symbols for C. */
28 %{.S:-D__LANGUAGE_ASSEMBLY__ -D__LANGUAGE_ASSEMBLY %{!ansi:-DLANGUAGE_ASSEMBLY }}\
29 %{.cc|.cxx|.C:-D__LANGUAGE_C_PLUS_PLUS__ -D__LANGUAGE_C_PLUS_PLUS -D__cplusplus }\
30 %{.m:-D__LANGUAGE_OBJECTIVE_C__ -D__LANGUAGE_OBJECTIVE_C }\
31 %{!.S:%{!.cc:%{!.cxx:%{!.C:%{!.m:-D__LANGUAGE_C__ -D__LANGUAGE_C %{!ansi:-DLANGUAGE_C }}}}}}\
33 %{mieee-with-inexact:-D_IEEE_FP -D_IEEE_FP_INEXACT }}\
34 %(cpp_cpu) %(cpp_subtarget)"
36 #ifndef CPP_SUBTARGET_SPEC
37 #define CPP_SUBTARGET_SPEC ""
40 /* Set the spec to use for signed char. The default tests the above macro
41 but DEC's compiler can't handle the conditional in a "constant"
44 #define SIGNED_CHAR_SPEC "%{funsigned-char:-D__CHAR_UNSIGNED__}"
46 #define WORD_SWITCH_TAKES_ARG(STR) \
47 (!strcmp (STR, "rpath") || !strcmp (STR, "include") \
48 || !strcmp (STR, "imacros") || !strcmp (STR, "aux-info") \
49 || !strcmp (STR, "idirafter") || !strcmp (STR, "iprefix") \
50 || !strcmp (STR, "iwithprefix") || !strcmp (STR, "iwithprefixbefore") \
51 || !strcmp (STR, "isystem"))
53 /* Print subsidiary information on the compiler version in use. */
54 #define TARGET_VERSION
56 /* Run-time compilation parameters selecting different hardware subsets. */
58 /* Which processor to schedule for. The cpu attribute defines a list that
59 mirrors this list, so changes to alpha.md must be made at the same time. */
62 {PROCESSOR_EV4, /* 2106[46]{a,} */
63 PROCESSOR_EV5, /* 21164{a,pc,} */
64 PROCESSOR_EV6}; /* 21264 */
66 extern enum processor_type alpha_cpu;
68 enum alpha_trap_precision
70 ALPHA_TP_PROG, /* No precision (default). */
71 ALPHA_TP_FUNC, /* Trap contained within originating function. */
72 ALPHA_TP_INSN /* Instruction accuracy and code is resumption safe. */
75 enum alpha_fp_rounding_mode
77 ALPHA_FPRM_NORM, /* Normal rounding mode. */
78 ALPHA_FPRM_MINF, /* Round towards minus-infinity. */
79 ALPHA_FPRM_CHOP, /* Chopped rounding mode (towards 0). */
80 ALPHA_FPRM_DYN /* Dynamic rounding mode. */
83 enum alpha_fp_trap_mode
85 ALPHA_FPTM_N, /* Normal trap mode. */
86 ALPHA_FPTM_U, /* Underflow traps enabled. */
87 ALPHA_FPTM_SU, /* Software completion, w/underflow traps */
88 ALPHA_FPTM_SUI /* Software completion, w/underflow & inexact traps */
91 extern int target_flags;
93 extern enum alpha_trap_precision alpha_tp;
94 extern enum alpha_fp_rounding_mode alpha_fprm;
95 extern enum alpha_fp_trap_mode alpha_fptm;
97 /* This means that floating-point support exists in the target implementation
98 of the Alpha architecture. This is usually the default. */
99 #define MASK_FP (1 << 0)
100 #define TARGET_FP (target_flags & MASK_FP)
102 /* This means that floating-point registers are allowed to be used. Note
103 that Alpha implementations without FP operations are required to
104 provide the FP registers. */
106 #define MASK_FPREGS (1 << 1)
107 #define TARGET_FPREGS (target_flags & MASK_FPREGS)
109 /* This means that gas is used to process the assembler file. */
111 #define MASK_GAS (1 << 2)
112 #define TARGET_GAS (target_flags & MASK_GAS)
114 /* This means that we should mark procedures as IEEE conformant. */
116 #define MASK_IEEE_CONFORMANT (1 << 3)
117 #define TARGET_IEEE_CONFORMANT (target_flags & MASK_IEEE_CONFORMANT)
119 /* This means we should be IEEE-compliant except for inexact. */
121 #define MASK_IEEE (1 << 4)
122 #define TARGET_IEEE (target_flags & MASK_IEEE)
124 /* This means we should be fully IEEE-compliant. */
126 #define MASK_IEEE_WITH_INEXACT (1 << 5)
127 #define TARGET_IEEE_WITH_INEXACT (target_flags & MASK_IEEE_WITH_INEXACT)
129 /* This means we must construct all constants rather than emitting
130 them as literal data. */
132 #define MASK_BUILD_CONSTANTS (1 << 6)
133 #define TARGET_BUILD_CONSTANTS (target_flags & MASK_BUILD_CONSTANTS)
135 /* This means we handle floating points in VAX F- (float)
136 or G- (double) Format. */
138 #define MASK_FLOAT_VAX (1 << 7)
139 #define TARGET_FLOAT_VAX (target_flags & MASK_FLOAT_VAX)
141 /* This means that the processor has byte and half word loads and stores
142 (the BWX extension). */
144 #define MASK_BWX (1 << 8)
145 #define TARGET_BWX (target_flags & MASK_BWX)
147 /* This means that the processor has the MAX extension. */
148 #define MASK_MAX (1 << 9)
149 #define TARGET_MAX (target_flags & MASK_MAX)
151 /* This means that the processor has the FIX extension. */
152 #define MASK_FIX (1 << 10)
153 #define TARGET_FIX (target_flags & MASK_FIX)
155 /* This means that the processor has the CIX extension. */
156 #define MASK_CIX (1 << 11)
157 #define TARGET_CIX (target_flags & MASK_CIX)
159 /* This means that the processor is an EV5, EV56, or PCA56. This is defined
160 only in TARGET_CPU_DEFAULT. */
161 #define MASK_CPU_EV5 (1 << 28)
163 /* Likewise for EV6. */
164 #define MASK_CPU_EV6 (1 << 29)
166 /* This means we support the .arch directive in the assembler. Only
167 defined in TARGET_CPU_DEFAULT. */
168 #define MASK_SUPPORT_ARCH (1 << 30)
169 #define TARGET_SUPPORT_ARCH (target_flags & MASK_SUPPORT_ARCH)
171 /* These are for target os support and cannot be changed at runtime. */
172 #ifndef TARGET_WINDOWS_NT
173 #define TARGET_WINDOWS_NT 0
175 #ifndef TARGET_OPEN_VMS
176 #define TARGET_OPEN_VMS 0
179 #ifndef TARGET_AS_CAN_SUBTRACT_LABELS
180 #define TARGET_AS_CAN_SUBTRACT_LABELS TARGET_GAS
182 #ifndef TARGET_CAN_FAULT_IN_PROLOGUE
183 #define TARGET_CAN_FAULT_IN_PROLOGUE 0
185 #ifndef TARGET_HAS_XFLOATING_LIBS
186 #define TARGET_HAS_XFLOATING_LIBS 0
188 #ifndef TARGET_PROFILING_NEEDS_GP
189 #define TARGET_PROFILING_NEEDS_GP 0
192 /* Macro to define tables used to set the flags.
193 This is a list in braces of pairs in braces,
194 each pair being { "NAME", VALUE }
195 where VALUE is the bits to set or minus the bits to clear.
196 An empty string NAME is used to identify the default VALUE. */
198 #define TARGET_SWITCHES \
199 { {"no-soft-float", MASK_FP, "Use hardware fp"}, \
200 {"soft-float", - MASK_FP, "Do not use hardware fp"}, \
201 {"fp-regs", MASK_FPREGS, "Use fp registers"}, \
202 {"no-fp-regs", - (MASK_FP|MASK_FPREGS), "Do not use fp registers"}, \
203 {"alpha-as", -MASK_GAS, "Do not assume GAS"}, \
204 {"gas", MASK_GAS, "Assume GAS"}, \
205 {"ieee-conformant", MASK_IEEE_CONFORMANT, \
206 "Request IEEE-conformant math library routines (OSF/1)"}, \
207 {"ieee", MASK_IEEE|MASK_IEEE_CONFORMANT, \
208 "Emit IEEE-conformant code, without inexact exceptions"}, \
209 {"ieee-with-inexact", MASK_IEEE_WITH_INEXACT|MASK_IEEE_CONFORMANT, \
210 "Emit IEEE-conformant code, with inexact exceptions"}, \
211 {"build-constants", MASK_BUILD_CONSTANTS, \
212 "Do not emit complex integer constants to read-only memory"}, \
213 {"float-vax", MASK_FLOAT_VAX, "Use VAX fp"}, \
214 {"float-ieee", -MASK_FLOAT_VAX, "Do not use VAX fp"}, \
215 {"bwx", MASK_BWX, "Emit code for the byte/word ISA extension"}, \
216 {"no-bwx", -MASK_BWX, ""}, \
217 {"max", MASK_MAX, "Emit code for the motion video ISA extension"}, \
218 {"no-max", -MASK_MAX, ""}, \
219 {"fix", MASK_FIX, "Emit code for the fp move and sqrt ISA extension"}, \
220 {"no-fix", -MASK_FIX, ""}, \
221 {"cix", MASK_CIX, "Emit code for the counting ISA extension"}, \
222 {"no-cix", -MASK_CIX, ""}, \
223 {"", TARGET_DEFAULT | TARGET_CPU_DEFAULT, ""} }
225 #define TARGET_DEFAULT MASK_FP|MASK_FPREGS
227 #ifndef TARGET_CPU_DEFAULT
228 #define TARGET_CPU_DEFAULT 0
231 /* This macro is similar to `TARGET_SWITCHES' but defines names of
232 command options that have values. Its definition is an initializer
233 with a subgrouping for each command option.
235 Each subgrouping contains a string constant, that defines the fixed
236 part of the option name, and the address of a variable. The
237 variable, type `char *', is set to the variable part of the given
238 option if the fixed part matches. The actual option name is made
239 by appending `-m' to the specified name.
241 Here is an example which defines `-mshort-data-NUMBER'. If the
242 given option is `-mshort-data-512', the variable `m88k_short_data'
243 will be set to the string `"512"'.
245 extern char *m88k_short_data;
246 #define TARGET_OPTIONS { { "short-data-", &m88k_short_data } } */
248 extern const char *alpha_cpu_string; /* For -mcpu= */
249 extern const char *alpha_fprm_string; /* For -mfp-rounding-mode=[n|m|c|d] */
250 extern const char *alpha_fptm_string; /* For -mfp-trap-mode=[n|u|su|sui] */
251 extern const char *alpha_tp_string; /* For -mtrap-precision=[p|f|i] */
252 extern const char *alpha_mlat_string; /* For -mmemory-latency= */
254 #define TARGET_OPTIONS \
256 {"cpu=", &alpha_cpu_string, \
257 "Generate code for a given CPU"}, \
258 {"fp-rounding-mode=", &alpha_fprm_string, \
259 "Control the generated fp rounding mode"}, \
260 {"fp-trap-mode=", &alpha_fptm_string, \
261 "Control the IEEE trap mode"}, \
262 {"trap-precision=", &alpha_tp_string, \
263 "Control the precision given to fp exceptions"}, \
264 {"memory-latency=", &alpha_mlat_string, \
265 "Tune expected memory latency"}, \
268 /* Attempt to describe CPU characteristics to the preprocessor. */
270 /* Corresponding to amask... */
271 #define CPP_AM_BWX_SPEC "-D__alpha_bwx__ -Acpu(bwx)"
272 #define CPP_AM_MAX_SPEC "-D__alpha_max__ -Acpu(max)"
273 #define CPP_AM_FIX_SPEC "-D__alpha_fix__ -Acpu(fix)"
274 #define CPP_AM_CIX_SPEC "-D__alpha_cix__ -Acpu(cix)"
276 /* Corresponding to implver... */
277 #define CPP_IM_EV4_SPEC "-D__alpha_ev4__ -Acpu(ev4)"
278 #define CPP_IM_EV5_SPEC "-D__alpha_ev5__ -Acpu(ev5)"
279 #define CPP_IM_EV6_SPEC "-D__alpha_ev6__ -Acpu(ev6)"
281 /* Common combinations. */
282 #define CPP_CPU_EV4_SPEC "%(cpp_im_ev4)"
283 #define CPP_CPU_EV5_SPEC "%(cpp_im_ev5)"
284 #define CPP_CPU_EV56_SPEC "%(cpp_im_ev5) %(cpp_am_bwx)"
285 #define CPP_CPU_PCA56_SPEC "%(cpp_im_ev5) %(cpp_am_bwx) %(cpp_am_max)"
286 #define CPP_CPU_EV6_SPEC \
287 "%(cpp_im_ev6) %(cpp_am_bwx) %(cpp_am_max) %(cpp_am_fix)"
288 #define CPP_CPU_EV67_SPEC \
289 "%(cpp_im_ev6) %(cpp_am_bwx) %(cpp_am_max) %(cpp_am_fix) %(cpp_am_cix)"
291 #ifndef CPP_CPU_DEFAULT_SPEC
292 # if TARGET_CPU_DEFAULT & MASK_CPU_EV6
293 # if TARGET_CPU_DEFAULT & MASK_CIX
294 # define CPP_CPU_DEFAULT_SPEC CPP_CPU_EV67_SPEC
296 # define CPP_CPU_DEFAULT_SPEC CPP_CPU_EV6_SPEC
299 # if TARGET_CPU_DEFAULT & MASK_CPU_EV5
300 # if TARGET_CPU_DEFAULT & MASK_MAX
301 # define CPP_CPU_DEFAULT_SPEC CPP_CPU_PCA56_SPEC
303 # if TARGET_CPU_DEFAULT & MASK_BWX
304 # define CPP_CPU_DEFAULT_SPEC CPP_CPU_EV56_SPEC
306 # define CPP_CPU_DEFAULT_SPEC CPP_CPU_EV5_SPEC
310 # define CPP_CPU_DEFAULT_SPEC CPP_CPU_EV4_SPEC
313 #endif /* CPP_CPU_DEFAULT_SPEC */
316 #define CPP_CPU_SPEC "\
317 %{!undef:-Acpu(alpha) -Amachine(alpha) -D__alpha -D__alpha__ \
318 %{mcpu=ev4|mcpu=21064:%(cpp_cpu_ev4) }\
319 %{mcpu=ev5|mcpu=21164:%(cpp_cpu_ev5) }\
320 %{mcpu=ev56|mcpu=21164a:%(cpp_cpu_ev56) }\
321 %{mcpu=pca56|mcpu=21164pc|mcpu=21164PC:%(cpp_cpu_pca56) }\
322 %{mcpu=ev6|mcpu=21264:%(cpp_cpu_ev6) }\
323 %{mcpu=ev67|mcpu=21264a:%(cpp_cpu_ev67) }\
324 %{!mcpu*:%(cpp_cpu_default) }}"
327 /* This macro defines names of additional specifications to put in the
328 specs that can be used in various specifications like CC1_SPEC. Its
329 definition is an initializer with a subgrouping for each command option.
331 Each subgrouping contains a string constant, that defines the
332 specification name, and a string constant that used by the GNU CC driver
335 Do not define this macro if it does not need to do anything. */
337 #ifndef SUBTARGET_EXTRA_SPECS
338 #define SUBTARGET_EXTRA_SPECS
341 #define EXTRA_SPECS \
342 { "cpp_am_bwx", CPP_AM_BWX_SPEC }, \
343 { "cpp_am_max", CPP_AM_MAX_SPEC }, \
344 { "cpp_am_fix", CPP_AM_FIX_SPEC }, \
345 { "cpp_am_cix", CPP_AM_CIX_SPEC }, \
346 { "cpp_im_ev4", CPP_IM_EV4_SPEC }, \
347 { "cpp_im_ev5", CPP_IM_EV5_SPEC }, \
348 { "cpp_im_ev6", CPP_IM_EV6_SPEC }, \
349 { "cpp_cpu_ev4", CPP_CPU_EV4_SPEC }, \
350 { "cpp_cpu_ev5", CPP_CPU_EV5_SPEC }, \
351 { "cpp_cpu_ev56", CPP_CPU_EV56_SPEC }, \
352 { "cpp_cpu_pca56", CPP_CPU_PCA56_SPEC }, \
353 { "cpp_cpu_ev6", CPP_CPU_EV6_SPEC }, \
354 { "cpp_cpu_ev67", CPP_CPU_EV67_SPEC }, \
355 { "cpp_cpu_default", CPP_CPU_DEFAULT_SPEC }, \
356 { "cpp_cpu", CPP_CPU_SPEC }, \
357 { "cpp_subtarget", CPP_SUBTARGET_SPEC }, \
358 SUBTARGET_EXTRA_SPECS
361 /* Sometimes certain combinations of command options do not make sense
362 on a particular target machine. You can define a macro
363 `OVERRIDE_OPTIONS' to take account of this. This macro, if
364 defined, is executed once just after all the command options have
367 On the Alpha, it is used to translate target-option strings into
370 #define OVERRIDE_OPTIONS override_options ()
373 /* Define this macro to change register usage conditional on target flags.
375 On the Alpha, we use this to disable the floating-point registers when
378 #define CONDITIONAL_REGISTER_USAGE \
379 if (! TARGET_FPREGS) \
380 for (i = 32; i < 63; i++) \
381 fixed_regs[i] = call_used_regs[i] = 1;
383 /* Show we can debug even without a frame pointer. */
384 #define CAN_DEBUG_WITHOUT_FP
386 /* target machine storage layout */
388 /* Define to enable software floating point emulation. */
389 #define REAL_ARITHMETIC
391 /* The following #defines are used when compiling the routines in
392 libgcc1.c. Since the Alpha calling conventions require single
393 precision floats to be passed in the floating-point registers
394 (rather than in the general registers) we have to build the
395 libgcc1.c routines in such a way that they know the actual types
396 of their formal arguments and the actual types of their return
397 values. Otherwise, gcc will generate calls to the libgcc1.c
398 routines, passing arguments in the floating-point registers,
399 but the libgcc1.c routines will expect their arguments on the
400 stack (where the Alpha calling conventions require structs &
401 unions to be passed). */
403 #define FLOAT_VALUE_TYPE double
404 #define INTIFY(FLOATVAL) (FLOATVAL)
405 #define FLOATIFY(INTVAL) (INTVAL)
406 #define FLOAT_ARG_TYPE double
408 /* Define the size of `int'. The default is the same as the word size. */
409 #define INT_TYPE_SIZE 32
411 /* Define the size of `long long'. The default is the twice the word size. */
412 #define LONG_LONG_TYPE_SIZE 64
414 /* The two floating-point formats we support are S-floating, which is
415 4 bytes, and T-floating, which is 8 bytes. `float' is S and `double'
416 and `long double' are T. */
418 #define FLOAT_TYPE_SIZE 32
419 #define DOUBLE_TYPE_SIZE 64
420 #define LONG_DOUBLE_TYPE_SIZE 64
422 #define WCHAR_TYPE "unsigned int"
423 #define WCHAR_TYPE_SIZE 32
425 /* Define this macro if it is advisable to hold scalars in registers
426 in a wider mode than that declared by the program. In such cases,
427 the value is constrained to be within the bounds of the declared
428 type, but kept valid in the wider mode. The signedness of the
429 extension may differ from that of the type.
431 For Alpha, we always store objects in a full register. 32-bit objects
432 are always sign-extended, but smaller objects retain their signedness. */
434 #define PROMOTE_MODE(MODE,UNSIGNEDP,TYPE) \
435 if (GET_MODE_CLASS (MODE) == MODE_INT \
436 && GET_MODE_SIZE (MODE) < UNITS_PER_WORD) \
438 if ((MODE) == SImode) \
443 /* Define this if function arguments should also be promoted using the above
446 #define PROMOTE_FUNCTION_ARGS
448 /* Likewise, if the function return value is promoted. */
450 #define PROMOTE_FUNCTION_RETURN
452 /* Define this if most significant bit is lowest numbered
453 in instructions that operate on numbered bit-fields.
455 There are no such instructions on the Alpha, but the documentation
457 #define BITS_BIG_ENDIAN 0
459 /* Define this if most significant byte of a word is the lowest numbered.
460 This is false on the Alpha. */
461 #define BYTES_BIG_ENDIAN 0
463 /* Define this if most significant word of a multiword number is lowest
466 For Alpha we can decide arbitrarily since there are no machine instructions
467 for them. Might as well be consistent with bytes. */
468 #define WORDS_BIG_ENDIAN 0
470 /* number of bits in an addressable storage unit */
471 #define BITS_PER_UNIT 8
473 /* Width in bits of a "word", which is the contents of a machine register.
474 Note that this is not necessarily the width of data type `int';
475 if using 16-bit ints on a 68000, this would still be 32.
476 But on a machine with 16-bit registers, this would be 16. */
477 #define BITS_PER_WORD 64
479 /* Width of a word, in units (bytes). */
480 #define UNITS_PER_WORD 8
482 /* Width in bits of a pointer.
483 See also the macro `Pmode' defined below. */
484 #define POINTER_SIZE 64
486 /* Allocation boundary (in *bits*) for storing arguments in argument list. */
487 #define PARM_BOUNDARY 64
489 /* Boundary (in *bits*) on which stack pointer should be aligned. */
490 #define STACK_BOUNDARY 64
492 /* Allocation boundary (in *bits*) for the code of a function. */
493 #define FUNCTION_BOUNDARY 128
495 /* Alignment of field after `int : 0' in a structure. */
496 #define EMPTY_FIELD_BOUNDARY 64
498 /* Every structure's size must be a multiple of this. */
499 #define STRUCTURE_SIZE_BOUNDARY 8
501 /* A bitfield declared as `int' forces `int' alignment for the struct. */
502 #define PCC_BITFIELD_TYPE_MATTERS 1
504 /* Align loop starts for optimal branching.
506 ??? Kludge this and the next macro for the moment by not doing anything if
507 we don't optimize and also if we are writing ECOFF symbols to work around
508 a bug in DEC's assembler. */
510 #define LOOP_ALIGN(LABEL) \
511 (optimize > 0 && write_symbols != SDB_DEBUG ? 4 : 0)
513 /* This is how to align an instruction for optimal branching. On
514 Alpha we'll get better performance by aligning on an octaword
517 #define LABEL_ALIGN_AFTER_BARRIER(FILE) \
518 (optimize > 0 && write_symbols != SDB_DEBUG ? 4 : 0)
520 /* No data type wants to be aligned rounder than this. */
521 #define BIGGEST_ALIGNMENT 128
523 /* For atomic access to objects, must have at least 32-bit alignment
524 unless the machine has byte operations. */
525 #define MINIMUM_ATOMIC_ALIGNMENT ((unsigned int) (TARGET_BWX ? 8 : 32))
527 /* Align all constants and variables to at least a word boundary so
528 we can pick up pieces of them faster. */
529 /* ??? Only if block-move stuff knows about different source/destination
532 #define CONSTANT_ALIGNMENT(EXP, ALIGN) MAX ((ALIGN), BITS_PER_WORD)
533 #define DATA_ALIGNMENT(EXP, ALIGN) MAX ((ALIGN), BITS_PER_WORD)
536 /* Set this non-zero if move instructions will actually fail to work
537 when given unaligned data.
539 Since we get an error message when we do one, call them invalid. */
541 #define STRICT_ALIGNMENT 1
543 /* Set this non-zero if unaligned move instructions are extremely slow.
545 On the Alpha, they trap. */
547 #define SLOW_UNALIGNED_ACCESS(MODE, ALIGN) 1
549 /* Standard register usage. */
551 /* Number of actual hardware registers.
552 The hardware registers are assigned numbers for the compiler
553 from 0 to just below FIRST_PSEUDO_REGISTER.
554 All registers that the compiler knows about must be given numbers,
555 even those that are not normally considered general registers.
557 We define all 32 integer registers, even though $31 is always zero,
558 and all 32 floating-point registers, even though $f31 is also
559 always zero. We do not bother defining the FP status register and
560 there are no other registers.
562 Since $31 is always zero, we will use register number 31 as the
563 argument pointer. It will never appear in the generated code
564 because we will always be eliminating it in favor of the stack
565 pointer or hardware frame pointer.
567 Likewise, we use $f31 for the frame pointer, which will always
568 be eliminated in favor of the hardware frame pointer or the
571 #define FIRST_PSEUDO_REGISTER 64
573 /* 1 for registers that have pervasive standard uses
574 and are not available for the register allocator. */
576 #define FIXED_REGISTERS \
577 {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
578 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, \
579 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
580 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1 }
582 /* 1 for registers not available across function calls.
583 These must include the FIXED_REGISTERS and also any
584 registers that can be used without being saved.
585 The latter must include the registers where values are returned
586 and the register where structure-value addresses are passed.
587 Aside from that, you can include as many other registers as you like. */
588 #define CALL_USED_REGISTERS \
589 {1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, \
590 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, \
591 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, \
592 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 }
594 /* List the order in which to allocate registers. Each register must be
595 listed once, even those in FIXED_REGISTERS.
597 We allocate in the following order:
598 $f10-$f15 (nonsaved floating-point register)
600 $f21-$f16 (likewise, but input args)
601 $f0 (nonsaved, but return value)
602 $f1 (nonsaved, but immediate before saved)
603 $f2-$f9 (saved floating-point registers)
604 $1-$8 (nonsaved integer registers)
607 $0 (likewise, but return value)
608 $21-$16 (likewise, but input args)
609 $27 (procedure value in OSF, nonsaved in NT)
610 $9-$14 (saved integer registers)
614 $30, $31, $f31 (stack pointer and always zero/ap & fp) */
616 #define REG_ALLOC_ORDER \
617 {42, 43, 44, 45, 46, 47, \
618 54, 55, 56, 57, 58, 59, 60, 61, 62, \
619 53, 52, 51, 50, 49, 48, \
621 34, 35, 36, 37, 38, 39, 40, 41, \
622 1, 2, 3, 4, 5, 6, 7, 8, \
626 21, 20, 19, 18, 17, 16, \
628 9, 10, 11, 12, 13, 14, \
634 /* Return number of consecutive hard regs needed starting at reg REGNO
635 to hold something of mode MODE.
636 This is ordinarily the length in words of a value of mode MODE
637 but can be less for certain modes in special long registers. */
639 #define HARD_REGNO_NREGS(REGNO, MODE) \
640 ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)
642 /* Value is 1 if hard register REGNO can hold a value of machine-mode MODE.
643 On Alpha, the integer registers can hold any mode. The floating-point
644 registers can hold 32-bit and 64-bit integers as well, but not 16-bit
647 #define HARD_REGNO_MODE_OK(REGNO, MODE) \
648 ((REGNO) >= 32 && (REGNO) <= 62 \
649 ? GET_MODE_UNIT_SIZE (MODE) == 8 || GET_MODE_UNIT_SIZE (MODE) == 4 \
652 /* A C expression that is nonzero if a value of mode
653 MODE1 is accessible in mode MODE2 without copying.
655 This asymmetric test is true when MODE1 could be put
656 in an FP register but MODE2 could not. */
658 #define MODES_TIEABLE_P(MODE1, MODE2) \
659 (HARD_REGNO_MODE_OK (32, (MODE1)) \
660 ? HARD_REGNO_MODE_OK (32, (MODE2)) \
663 /* Specify the registers used for certain standard purposes.
664 The values of these macros are register numbers. */
666 /* Alpha pc isn't overloaded on a register that the compiler knows about. */
667 /* #define PC_REGNUM */
669 /* Register to use for pushing function arguments. */
670 #define STACK_POINTER_REGNUM 30
672 /* Base register for access to local variables of the function. */
673 #define HARD_FRAME_POINTER_REGNUM 15
675 /* Value should be nonzero if functions must have frame pointers.
676 Zero means the frame pointer need not be set up (and parms
677 may be accessed via the stack pointer) in functions that seem suitable.
678 This is computed in `reload', in reload1.c. */
679 #define FRAME_POINTER_REQUIRED 0
681 /* Base register for access to arguments of the function. */
682 #define ARG_POINTER_REGNUM 31
684 /* Base register for access to local variables of function. */
685 #define FRAME_POINTER_REGNUM 63
687 /* Register in which static-chain is passed to a function.
689 For the Alpha, this is based on an example; the calling sequence
690 doesn't seem to specify this. */
691 #define STATIC_CHAIN_REGNUM 1
693 /* Register in which address to store a structure value
694 arrives in the function. On the Alpha, the address is passed
695 as a hidden argument. */
696 #define STRUCT_VALUE 0
698 /* Define the classes of registers for register constraints in the
699 machine description. Also define ranges of constants.
701 One of the classes must always be named ALL_REGS and include all hard regs.
702 If there is more than one class, another class must be named NO_REGS
703 and contain no registers.
705 The name GENERAL_REGS must be the name of a class (or an alias for
706 another name such as ALL_REGS). This is the class of registers
707 that is allowed by "g" or "r" in a register constraint.
708 Also, registers outside this class are allocated only when
709 instructions express preferences for them.
711 The classes must be numbered in nondecreasing order; that is,
712 a larger-numbered class must never be contained completely
713 in a smaller-numbered class.
715 For any two classes, it is very desirable that there be another
716 class that represents their union. */
718 enum reg_class { NO_REGS, GENERAL_REGS, FLOAT_REGS, ALL_REGS,
721 #define N_REG_CLASSES (int) LIM_REG_CLASSES
723 /* Give names of register classes as strings for dump file. */
725 #define REG_CLASS_NAMES \
726 {"NO_REGS", "GENERAL_REGS", "FLOAT_REGS", "ALL_REGS" }
728 /* Define which registers fit in which classes.
729 This is an initializer for a vector of HARD_REG_SET
730 of length N_REG_CLASSES. */
732 #define REG_CLASS_CONTENTS \
733 { {0, 0}, {~0, 0x80000000}, {0, 0x7fffffff}, {~0, ~0} }
735 /* The same information, inverted:
736 Return the class number of the smallest class containing
737 reg number REGNO. This could be a conditional expression
738 or could index an array. */
740 #define REGNO_REG_CLASS(REGNO) \
741 ((REGNO) >= 32 && (REGNO) <= 62 ? FLOAT_REGS : GENERAL_REGS)
743 /* The class value for index registers, and the one for base regs. */
744 #define INDEX_REG_CLASS NO_REGS
745 #define BASE_REG_CLASS GENERAL_REGS
747 /* Get reg_class from a letter such as appears in the machine description. */
749 #define REG_CLASS_FROM_LETTER(C) \
750 ((C) == 'f' ? FLOAT_REGS : NO_REGS)
752 /* Define this macro to change register usage conditional on target flags. */
753 /* #define CONDITIONAL_REGISTER_USAGE */
755 /* The letters I, J, K, L, M, N, O, and P in a register constraint string
756 can be used to stand for particular ranges of immediate operands.
757 This macro defines what the ranges are.
758 C is the letter, and VALUE is a constant value.
759 Return 1 if VALUE is in the range specified by C.
762 `I' is used for the range of constants most insns can contain.
763 `J' is the constant zero.
764 `K' is used for the constant in an LDA insn.
765 `L' is used for the constant in a LDAH insn.
766 `M' is used for the constants that can be AND'ed with using a ZAP insn.
767 `N' is used for complemented 8-bit constants.
768 `O' is used for negated 8-bit constants.
769 `P' is used for the constants 1, 2 and 3. */
771 #define CONST_OK_FOR_LETTER_P(VALUE, C) \
772 ((C) == 'I' ? (unsigned HOST_WIDE_INT) (VALUE) < 0x100 \
773 : (C) == 'J' ? (VALUE) == 0 \
774 : (C) == 'K' ? (unsigned HOST_WIDE_INT) ((VALUE) + 0x8000) < 0x10000 \
775 : (C) == 'L' ? (((VALUE) & 0xffff) == 0 \
776 && (((VALUE)) >> 31 == -1 || (VALUE) >> 31 == 0)) \
777 : (C) == 'M' ? zap_mask (VALUE) \
778 : (C) == 'N' ? (unsigned HOST_WIDE_INT) (~ (VALUE)) < 0x100 \
779 : (C) == 'O' ? (unsigned HOST_WIDE_INT) (- (VALUE)) < 0x100 \
780 : (C) == 'P' ? (VALUE) == 1 || (VALUE) == 2 || (VALUE) == 3 \
783 /* Similar, but for floating or large integer constants, and defining letters
784 G and H. Here VALUE is the CONST_DOUBLE rtx itself.
786 For Alpha, `G' is the floating-point constant zero. `H' is a CONST_DOUBLE
787 that is the operand of a ZAP insn. */
789 #define CONST_DOUBLE_OK_FOR_LETTER_P(VALUE, C) \
790 ((C) == 'G' ? (GET_MODE_CLASS (GET_MODE (VALUE)) == MODE_FLOAT \
791 && (VALUE) == CONST0_RTX (GET_MODE (VALUE))) \
792 : (C) == 'H' ? (GET_MODE (VALUE) == VOIDmode \
793 && zap_mask (CONST_DOUBLE_LOW (VALUE)) \
794 && zap_mask (CONST_DOUBLE_HIGH (VALUE))) \
797 /* Optional extra constraints for this machine.
799 For the Alpha, `Q' means that this is a memory operand but not a
800 reference to an unaligned location.
802 `R' is a SYMBOL_REF that has SYMBOL_REF_FLAG set or is the current
805 'S' is a 6-bit constant (valid for a shift insn). */
807 #define EXTRA_CONSTRAINT(OP, C) \
808 ((C) == 'Q' ? normal_memory_operand (OP, VOIDmode) \
809 : (C) == 'R' ? current_file_function_operand (OP, Pmode) \
810 : (C) == 'S' ? (GET_CODE (OP) == CONST_INT \
811 && (unsigned HOST_WIDE_INT) INTVAL (OP) < 64) \
814 /* Given an rtx X being reloaded into a reg required to be
815 in class CLASS, return the class of reg to actually use.
816 In general this is just CLASS; but on some machines
817 in some cases it is preferable to use a more restrictive class.
819 On the Alpha, all constants except zero go into a floating-point
820 register via memory. */
822 #define PREFERRED_RELOAD_CLASS(X, CLASS) \
823 (CONSTANT_P (X) && (X) != const0_rtx && (X) != CONST0_RTX (GET_MODE (X)) \
824 ? ((CLASS) == FLOAT_REGS || (CLASS) == NO_REGS ? NO_REGS : GENERAL_REGS)\
827 /* Loading and storing HImode or QImode values to and from memory
828 usually requires a scratch register. The exceptions are loading
829 QImode and HImode from an aligned address to a general register
830 unless byte instructions are permitted.
831 We also cannot load an unaligned address or a paradoxical SUBREG into an
834 #define SECONDARY_INPUT_RELOAD_CLASS(CLASS,MODE,IN) \
835 secondary_reload_class((CLASS), (MODE), (IN), 1)
837 #define SECONDARY_OUTPUT_RELOAD_CLASS(CLASS,MODE,OUT) \
838 secondary_reload_class((CLASS), (MODE), (OUT), 0)
840 /* If we are copying between general and FP registers, we need a memory
841 location unless the FIX extension is available. */
843 #define SECONDARY_MEMORY_NEEDED(CLASS1,CLASS2,MODE) \
844 (! TARGET_FIX && (CLASS1) != (CLASS2))
846 /* Specify the mode to be used for memory when a secondary memory
847 location is needed. If MODE is floating-point, use it. Otherwise,
848 widen to a word like the default. This is needed because we always
849 store integers in FP registers in quadword format. This whole
850 area is very tricky! */
851 #define SECONDARY_MEMORY_NEEDED_MODE(MODE) \
852 (GET_MODE_CLASS (MODE) == MODE_FLOAT ? (MODE) \
853 : GET_MODE_SIZE (MODE) >= 4 ? (MODE) \
854 : mode_for_size (BITS_PER_WORD, GET_MODE_CLASS (MODE), 0))
856 /* Return the maximum number of consecutive registers
857 needed to represent mode MODE in a register of class CLASS. */
859 #define CLASS_MAX_NREGS(CLASS, MODE) \
860 ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)
862 /* If defined, gives a class of registers that cannot be used as the
863 operand of a SUBREG that changes the size of the object. */
865 #define CLASS_CANNOT_CHANGE_SIZE FLOAT_REGS
867 /* Define the cost of moving between registers of various classes. Moving
868 between FLOAT_REGS and anything else except float regs is expensive.
869 In fact, we make it quite expensive because we really don't want to
870 do these moves unless it is clearly worth it. Optimizations may
871 reduce the impact of not being able to allocate a pseudo to a
874 #define REGISTER_MOVE_COST(CLASS1, CLASS2) \
875 (((CLASS1) == FLOAT_REGS) == ((CLASS2) == FLOAT_REGS) \
877 : TARGET_FIX ? 3 : 4+2*alpha_memory_latency)
879 /* A C expressions returning the cost of moving data of MODE from a register to
882 On the Alpha, bump this up a bit. */
884 extern int alpha_memory_latency;
885 #define MEMORY_MOVE_COST(MODE,CLASS,IN) (2*alpha_memory_latency)
887 /* Provide the cost of a branch. Exact meaning under development. */
888 #define BRANCH_COST 5
890 /* Adjust the cost of dependencies. */
892 #define ADJUST_COST(INSN,LINK,DEP,COST) \
893 (COST) = alpha_adjust_cost (INSN, LINK, DEP, COST)
895 /* Stack layout; function entry, exit and calling. */
897 /* Define this if pushing a word on the stack
898 makes the stack pointer a smaller address. */
899 #define STACK_GROWS_DOWNWARD
901 /* Define this if the nominal address of the stack frame
902 is at the high-address end of the local variables;
903 that is, each additional local variable allocated
904 goes at a more negative offset in the frame. */
905 /* #define FRAME_GROWS_DOWNWARD */
907 /* Offset within stack frame to start allocating local variables at.
908 If FRAME_GROWS_DOWNWARD, this is the offset to the END of the
909 first local allocated. Otherwise, it is the offset to the BEGINNING
910 of the first local allocated. */
912 #define STARTING_FRAME_OFFSET 0
914 /* If we generate an insn to push BYTES bytes,
915 this says how many the stack pointer really advances by.
916 On Alpha, don't define this because there are no push insns. */
917 /* #define PUSH_ROUNDING(BYTES) */
919 /* Define this to be nonzero if stack checking is built into the ABI. */
920 #define STACK_CHECK_BUILTIN 1
922 /* Define this if the maximum size of all the outgoing args is to be
923 accumulated and pushed during the prologue. The amount can be
924 found in the variable current_function_outgoing_args_size. */
925 #define ACCUMULATE_OUTGOING_ARGS 1
927 /* Offset of first parameter from the argument pointer register value. */
929 #define FIRST_PARM_OFFSET(FNDECL) 0
931 /* Definitions for register eliminations.
933 We have two registers that can be eliminated on the Alpha. First, the
934 frame pointer register can often be eliminated in favor of the stack
935 pointer register. Secondly, the argument pointer register can always be
936 eliminated; it is replaced with either the stack or frame pointer. */
938 /* This is an array of structures. Each structure initializes one pair
939 of eliminable registers. The "from" register number is given first,
940 followed by "to". Eliminations of the same "from" register are listed
941 in order of preference. */
943 #define ELIMINABLE_REGS \
944 {{ ARG_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
945 { ARG_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM}, \
946 { FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
947 { FRAME_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM}}
949 /* Given FROM and TO register numbers, say whether this elimination is allowed.
950 Frame pointer elimination is automatically handled.
952 All eliminations are valid since the cases where FP can't be
953 eliminated are already handled. */
955 #define CAN_ELIMINATE(FROM, TO) 1
957 /* Round up to a multiple of 16 bytes. */
958 #define ALPHA_ROUND(X) (((X) + 15) & ~ 15)
960 /* Define the offset between two registers, one to be eliminated, and the other
961 its replacement, at the start of a routine. */
962 #define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \
963 { if ((FROM) == FRAME_POINTER_REGNUM) \
964 (OFFSET) = (ALPHA_ROUND (current_function_outgoing_args_size) \
965 + alpha_sa_size ()); \
966 else if ((FROM) == ARG_POINTER_REGNUM) \
967 (OFFSET) = (ALPHA_ROUND (current_function_outgoing_args_size) \
969 + (ALPHA_ROUND (get_frame_size () \
970 + current_function_pretend_args_size) \
971 - current_function_pretend_args_size)); \
976 /* Define this if stack space is still allocated for a parameter passed
978 /* #define REG_PARM_STACK_SPACE */
980 /* Value is the number of bytes of arguments automatically
981 popped when returning from a subroutine call.
982 FUNDECL is the declaration node of the function (as a tree),
983 FUNTYPE is the data type of the function (as a tree),
984 or for a library call it is an identifier node for the subroutine name.
985 SIZE is the number of bytes of arguments passed on the stack. */
987 #define RETURN_POPS_ARGS(FUNDECL,FUNTYPE,SIZE) 0
989 /* Define how to find the value returned by a function.
990 VALTYPE is the data type of the value (as a tree).
991 If the precise function being called is known, FUNC is its FUNCTION_DECL;
992 otherwise, FUNC is 0.
994 On Alpha the value is found in $0 for integer functions and
995 $f0 for floating-point functions. */
997 #define FUNCTION_VALUE(VALTYPE, FUNC) \
998 gen_rtx_REG (((INTEGRAL_TYPE_P (VALTYPE) \
999 && TYPE_PRECISION (VALTYPE) < BITS_PER_WORD) \
1000 || POINTER_TYPE_P (VALTYPE)) \
1001 ? word_mode : TYPE_MODE (VALTYPE), \
1003 && (TREE_CODE (VALTYPE) == REAL_TYPE \
1004 || TREE_CODE (VALTYPE) == COMPLEX_TYPE)) \
1007 /* Define how to find the value returned by a library function
1008 assuming the value has mode MODE. */
1010 #define LIBCALL_VALUE(MODE) \
1011 gen_rtx_REG (MODE, \
1013 && (GET_MODE_CLASS (MODE) == MODE_FLOAT \
1014 || GET_MODE_CLASS (MODE) == MODE_COMPLEX_FLOAT) \
1017 /* The definition of this macro implies that there are cases where
1018 a scalar value cannot be returned in registers.
1020 For the Alpha, any structure or union type is returned in memory, as
1021 are integers whose size is larger than 64 bits. */
1023 #define RETURN_IN_MEMORY(TYPE) \
1024 (TYPE_MODE (TYPE) == BLKmode \
1025 || TYPE_MODE (TYPE) == TFmode \
1026 || TYPE_MODE (TYPE) == TCmode \
1027 || (TREE_CODE (TYPE) == INTEGER_TYPE && TYPE_PRECISION (TYPE) > 64))
1029 /* 1 if N is a possible register number for a function value
1030 as seen by the caller. */
1032 #define FUNCTION_VALUE_REGNO_P(N) \
1033 ((N) == 0 || (N) == 1 || (N) == 32 || (N) == 33)
1035 /* 1 if N is a possible register number for function argument passing.
1036 On Alpha, these are $16-$21 and $f16-$f21. */
1038 #define FUNCTION_ARG_REGNO_P(N) \
1039 (((N) >= 16 && (N) <= 21) || ((N) >= 16 + 32 && (N) <= 21 + 32))
1041 /* Define a data type for recording info about an argument list
1042 during the scan of that argument list. This data type should
1043 hold all necessary information about the function itself
1044 and about the args processed so far, enough to enable macros
1045 such as FUNCTION_ARG to determine where the next arg should go.
1047 On Alpha, this is a single integer, which is a number of words
1048 of arguments scanned so far.
1049 Thus 6 or more means all following args should go on the stack. */
1051 #define CUMULATIVE_ARGS int
1053 /* Initialize a variable CUM of type CUMULATIVE_ARGS
1054 for a call to a function whose data type is FNTYPE.
1055 For a library call, FNTYPE is 0. */
1057 #define INIT_CUMULATIVE_ARGS(CUM,FNTYPE,LIBNAME,INDIRECT) (CUM) = 0
1059 /* Define intermediate macro to compute the size (in registers) of an argument
1062 #define ALPHA_ARG_SIZE(MODE, TYPE, NAMED) \
1063 ((MODE) == TFmode || (MODE) == TCmode ? 1 \
1064 : (((MODE) == BLKmode ? int_size_in_bytes (TYPE) : GET_MODE_SIZE (MODE)) \
1065 + (UNITS_PER_WORD - 1)) / UNITS_PER_WORD)
1067 /* Update the data in CUM to advance over an argument
1068 of mode MODE and data type TYPE.
1069 (TYPE is null for libcalls where that information may not be available.) */
1071 #define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \
1072 if (MUST_PASS_IN_STACK (MODE, TYPE)) \
1075 (CUM) += ALPHA_ARG_SIZE (MODE, TYPE, NAMED)
1077 /* Determine where to put an argument to a function.
1078 Value is zero to push the argument on the stack,
1079 or a hard register in which to store the argument.
1081 MODE is the argument's machine mode.
1082 TYPE is the data type of the argument (as a tree).
1083 This is null for libcalls where that information may
1085 CUM is a variable of type CUMULATIVE_ARGS which gives info about
1086 the preceding args and about the function being called.
1087 NAMED is nonzero if this argument is a named parameter
1088 (otherwise it is an extra parameter matching an ellipsis).
1090 On Alpha the first 6 words of args are normally in registers
1091 and the rest are pushed. */
1093 #define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) \
1094 function_arg((CUM), (MODE), (TYPE), (NAMED))
1096 /* A C expression that indicates when an argument must be passed by
1097 reference. If nonzero for an argument, a copy of that argument is
1098 made in memory and a pointer to the argument is passed instead of
1099 the argument itself. The pointer is passed in whatever way is
1100 appropriate for passing a pointer to that type. */
1102 #define FUNCTION_ARG_PASS_BY_REFERENCE(CUM, MODE, TYPE, NAMED) \
1103 ((MODE) == TFmode || (MODE) == TCmode)
1105 /* Specify the padding direction of arguments.
1107 On the Alpha, we must pad upwards in order to be able to pass args in
1110 #define FUNCTION_ARG_PADDING(MODE, TYPE) upward
1112 /* For an arg passed partly in registers and partly in memory,
1113 this is the number of registers used.
1114 For args passed entirely in registers or entirely in memory, zero. */
1116 #define FUNCTION_ARG_PARTIAL_NREGS(CUM, MODE, TYPE, NAMED) \
1117 ((CUM) < 6 && 6 < (CUM) + ALPHA_ARG_SIZE (MODE, TYPE, NAMED) \
1120 /* Perform any needed actions needed for a function that is receiving a
1121 variable number of arguments.
1125 MODE and TYPE are the mode and type of the current parameter.
1127 PRETEND_SIZE is a variable that should be set to the amount of stack
1128 that must be pushed by the prolog to pretend that our caller pushed
1131 Normally, this macro will push all remaining incoming registers on the
1132 stack and set PRETEND_SIZE to the length of the registers pushed.
1134 On the Alpha, we allocate space for all 12 arg registers, but only
1135 push those that are remaining.
1137 However, if NO registers need to be saved, don't allocate any space.
1138 This is not only because we won't need the space, but because AP includes
1139 the current_pretend_args_size and we don't want to mess up any
1140 ap-relative addresses already made.
1142 If we are not to use the floating-point registers, save the integer
1143 registers where we would put the floating-point registers. This is
1144 not the most efficient way to implement varargs with just one register
1145 class, but it isn't worth doing anything more efficient in this rare
1148 #define SETUP_INCOMING_VARARGS(CUM,MODE,TYPE,PRETEND_SIZE,NO_RTL) \
1153 rtx tmp; int set = get_varargs_alias_set (); \
1154 tmp = gen_rtx_MEM (BLKmode, \
1155 plus_constant (virtual_incoming_args_rtx, \
1156 ((CUM) + 6)* UNITS_PER_WORD)); \
1157 MEM_ALIAS_SET (tmp) = set; \
1158 move_block_from_reg \
1160 6 - (CUM), (6 - (CUM)) * UNITS_PER_WORD); \
1162 tmp = gen_rtx_MEM (BLKmode, \
1163 plus_constant (virtual_incoming_args_rtx, \
1164 (CUM) * UNITS_PER_WORD)); \
1165 MEM_ALIAS_SET (tmp) = set; \
1166 move_block_from_reg \
1167 (16 + (TARGET_FPREGS ? 32 : 0) + CUM, tmp, \
1168 6 - (CUM), (6 - (CUM)) * UNITS_PER_WORD); \
1170 PRETEND_SIZE = 12 * UNITS_PER_WORD; \
1174 /* We do not allow indirect calls to be optimized into sibling calls, nor
1175 can we allow a call to a function in a different compilation unit to
1176 be optimized into a sibcall. Except if the function is known not to
1177 return, in which case our caller doesn't care what the gp is. */
1178 #define FUNCTION_OK_FOR_SIBCALL(DECL) \
1180 && ((TREE_ASM_WRITTEN (DECL) && !flag_pic) \
1181 || ! TREE_PUBLIC (DECL) \
1182 || (0 && TREE_THIS_VOLATILE (DECL))))
1184 /* Try to output insns to set TARGET equal to the constant C if it can be
1185 done in less than N insns. Do all computations in MODE. Returns the place
1186 where the output has been placed if it can be done and the insns have been
1187 emitted. If it would take more than N insns, zero is returned and no
1188 insns and emitted. */
1190 /* Define the information needed to generate branch and scc insns. This is
1191 stored from the compare operation. Note that we can't use "rtx" here
1192 since it hasn't been defined! */
1194 struct alpha_compare
1196 struct rtx_def *op0, *op1;
1200 extern struct alpha_compare alpha_compare;
1202 /* Machine specific function data. */
1204 struct machine_function
1206 /* An offset to apply to the stack pointer when unwinding from EH. */
1207 struct rtx_def *eh_epilogue_sp_ofs;
1209 /* If non-null, this rtx holds the return address for the function. */
1210 struct rtx_def *ra_rtx;
1213 /* Make (or fake) .linkage entry for function call.
1214 IS_LOCAL is 0 if name is used in call, 1 if name is used in definition. */
1216 /* This macro defines the start of an assembly comment. */
1218 #define ASM_COMMENT_START " #"
1220 /* This macro produces the initial definition of a function. */
1222 #define ASM_DECLARE_FUNCTION_NAME(FILE,NAME,DECL) \
1223 alpha_start_function(FILE,NAME,DECL);
1225 /* This macro closes up a function definition for the assembler. */
1227 #define ASM_DECLARE_FUNCTION_SIZE(FILE,NAME,DECL) \
1228 alpha_end_function(FILE,NAME,DECL)
1230 /* This macro notes the end of the prologue. */
1232 #define FUNCTION_END_PROLOGUE(FILE) output_end_prologue (FILE)
1234 /* Output any profiling code before the prologue. */
1236 #define PROFILE_BEFORE_PROLOGUE 1
1238 /* Output assembler code to FILE to increment profiler label # LABELNO
1239 for profiling a function entry. Under OSF/1, profiling is enabled
1240 by simply passing -pg to the assembler and linker. */
1242 #define FUNCTION_PROFILER(FILE, LABELNO)
1244 /* Output assembler code to FILE to initialize this source file's
1245 basic block profiling info, if that has not already been done.
1246 This assumes that __bb_init_func doesn't garble a1-a5. */
1248 #define FUNCTION_BLOCK_PROFILER(FILE, LABELNO) \
1250 ASM_OUTPUT_REG_PUSH (FILE, 16); \
1251 fputs ("\tlda $16,$PBX32\n", (FILE)); \
1252 fputs ("\tldq $26,0($16)\n", (FILE)); \
1253 fputs ("\tbne $26,1f\n", (FILE)); \
1254 fputs ("\tlda $27,__bb_init_func\n", (FILE)); \
1255 fputs ("\tjsr $26,($27),__bb_init_func\n", (FILE)); \
1256 fputs ("\tldgp $29,0($26)\n", (FILE)); \
1257 fputs ("1:\n", (FILE)); \
1258 ASM_OUTPUT_REG_POP (FILE, 16); \
1261 /* Output assembler code to FILE to increment the entry-count for
1262 the BLOCKNO'th basic block in this source file. */
1264 #define BLOCK_PROFILER(FILE, BLOCKNO) \
1266 int blockn = (BLOCKNO); \
1267 fputs ("\tsubq $30,16,$30\n", (FILE)); \
1268 fputs ("\tstq $26,0($30)\n", (FILE)); \
1269 fputs ("\tstq $27,8($30)\n", (FILE)); \
1270 fputs ("\tlda $26,$PBX34\n", (FILE)); \
1271 fprintf ((FILE), "\tldq $27,%d($26)\n", 8*blockn); \
1272 fputs ("\taddq $27,1,$27\n", (FILE)); \
1273 fprintf ((FILE), "\tstq $27,%d($26)\n", 8*blockn); \
1274 fputs ("\tldq $26,0($30)\n", (FILE)); \
1275 fputs ("\tldq $27,8($30)\n", (FILE)); \
1276 fputs ("\taddq $30,16,$30\n", (FILE)); \
1280 /* EXIT_IGNORE_STACK should be nonzero if, when returning from a function,
1281 the stack pointer does not matter. The value is tested only in
1282 functions that have frame pointers.
1283 No definition is equivalent to always zero. */
1285 #define EXIT_IGNORE_STACK 1
1287 /* Define registers used by the epilogue and return instruction. */
1289 #define EPILOGUE_USES(REGNO) ((REGNO) == 26)
1291 /* Output assembler code for a block containing the constant parts
1292 of a trampoline, leaving space for the variable parts.
1294 The trampoline should set the static chain pointer to value placed
1295 into the trampoline and should branch to the specified routine.
1296 Note that $27 has been set to the address of the trampoline, so we can
1297 use it for addressability of the two data items. Trampolines are always
1298 aligned to FUNCTION_BOUNDARY, which is 64 bits. */
1300 #define TRAMPOLINE_TEMPLATE(FILE) \
1302 fprintf (FILE, "\tldq $1,24($27)\n"); \
1303 fprintf (FILE, "\tldq $27,16($27)\n"); \
1304 fprintf (FILE, "\tjmp $31,($27),0\n"); \
1305 fprintf (FILE, "\tnop\n"); \
1306 fprintf (FILE, "\t.quad 0,0\n"); \
1309 /* Section in which to place the trampoline. On Alpha, instructions
1310 may only be placed in a text segment. */
1312 #define TRAMPOLINE_SECTION text_section
1314 /* Length in units of the trampoline for entering a nested function. */
1316 #define TRAMPOLINE_SIZE 32
1318 /* Emit RTL insns to initialize the variable parts of a trampoline.
1319 FNADDR is an RTX for the address of the function's pure code.
1320 CXT is an RTX for the static chain value for the function. */
1322 #define INITIALIZE_TRAMPOLINE(TRAMP, FNADDR, CXT) \
1323 alpha_initialize_trampoline (TRAMP, FNADDR, CXT, 16, 24, 8)
1325 /* A C expression whose value is RTL representing the value of the return
1326 address for the frame COUNT steps up from the current frame.
1327 FRAMEADDR is the frame pointer of the COUNT frame, or the frame pointer of
1328 the COUNT-1 frame if RETURN_ADDR_IN_PREVIOUS_FRAME is defined. */
1330 #define RETURN_ADDR_RTX alpha_return_addr
1332 /* Before the prologue, RA lives in $26. */
1333 #define INCOMING_RETURN_ADDR_RTX gen_rtx_REG (Pmode, 26)
1334 #define DWARF_FRAME_RETURN_COLUMN DWARF_FRAME_REGNUM (26)
1336 /* Addressing modes, and classification of registers for them. */
1338 /* #define HAVE_POST_INCREMENT 0 */
1339 /* #define HAVE_POST_DECREMENT 0 */
1341 /* #define HAVE_PRE_DECREMENT 0 */
1342 /* #define HAVE_PRE_INCREMENT 0 */
1344 /* Macros to check register numbers against specific register classes. */
1346 /* These assume that REGNO is a hard or pseudo reg number.
1347 They give nonzero only if REGNO is a hard reg of the suitable class
1348 or a pseudo reg currently allocated to a suitable hard reg.
1349 Since they use reg_renumber, they are safe only once reg_renumber
1350 has been allocated, which happens in local-alloc.c. */
1352 #define REGNO_OK_FOR_INDEX_P(REGNO) 0
1353 #define REGNO_OK_FOR_BASE_P(REGNO) \
1354 ((REGNO) < 32 || (unsigned) reg_renumber[REGNO] < 32 \
1355 || (REGNO) == 63 || reg_renumber[REGNO] == 63)
1357 /* Maximum number of registers that can appear in a valid memory address. */
1358 #define MAX_REGS_PER_ADDRESS 1
1360 /* Recognize any constant value that is a valid address. For the Alpha,
1361 there are only constants none since we want to use LDA to load any
1362 symbolic addresses into registers. */
1364 #define CONSTANT_ADDRESS_P(X) \
1365 (GET_CODE (X) == CONST_INT \
1366 && (unsigned HOST_WIDE_INT) (INTVAL (X) + 0x8000) < 0x10000)
1368 /* Include all constant integers and constant doubles, but not
1369 floating-point, except for floating-point zero. */
1371 #define LEGITIMATE_CONSTANT_P(X) \
1372 (GET_MODE_CLASS (GET_MODE (X)) != MODE_FLOAT \
1373 || (X) == CONST0_RTX (GET_MODE (X)))
1375 /* The macros REG_OK_FOR..._P assume that the arg is a REG rtx
1376 and check its validity for a certain class.
1377 We have two alternate definitions for each of them.
1378 The usual definition accepts all pseudo regs; the other rejects
1379 them unless they have been allocated suitable hard regs.
1380 The symbol REG_OK_STRICT causes the latter definition to be used.
1382 Most source files want to accept pseudo regs in the hope that
1383 they will get allocated to the class that the insn wants them to be in.
1384 Source files for reload pass need to be strict.
1385 After reload, it makes no difference, since pseudo regs have
1386 been eliminated by then. */
1388 #ifndef REG_OK_STRICT
1390 /* Nonzero if X is a hard reg that can be used as an index
1391 or if it is a pseudo reg. */
1392 #define REG_OK_FOR_INDEX_P(X) 0
1394 /* Nonzero if X is a hard reg that can be used as a base reg
1395 or if it is a pseudo reg. */
1396 #define REG_OK_FOR_BASE_P(X) \
1397 (REGNO (X) < 32 || REGNO (X) == 63 || REGNO (X) >= FIRST_PSEUDO_REGISTER)
1399 /* ??? Nonzero if X is the frame pointer, or some virtual register
1400 that may eliminate to the frame pointer. These will be allowed to
1401 have offsets greater than 32K. This is done because register
1402 elimination offsets will change the hi/lo split, and if we split
1403 before reload, we will require additional instructions. */
1404 #define REG_OK_FP_BASE_P(X) \
1405 (REGNO (X) == 31 || REGNO (X) == 63 \
1406 || (REGNO (X) >= FIRST_PSEUDO_REGISTER \
1407 && REGNO (X) < LAST_VIRTUAL_REGISTER))
1411 /* Nonzero if X is a hard reg that can be used as an index. */
1412 #define REG_OK_FOR_INDEX_P(X) REGNO_OK_FOR_INDEX_P (REGNO (X))
1414 /* Nonzero if X is a hard reg that can be used as a base reg. */
1415 #define REG_OK_FOR_BASE_P(X) REGNO_OK_FOR_BASE_P (REGNO (X))
1417 #define REG_OK_FP_BASE_P(X) 0
1421 /* GO_IF_LEGITIMATE_ADDRESS recognizes an RTL expression
1422 that is a valid memory address for an instruction.
1423 The MODE argument is the machine mode for the MEM expression
1424 that wants to use this address.
1426 For Alpha, we have either a constant address or the sum of a register
1427 and a constant address, or just a register. For DImode, any of those
1428 forms can be surrounded with an AND that clear the low-order three bits;
1429 this is an "unaligned" access.
1431 First define the basic valid address. */
1433 #define GO_IF_LEGITIMATE_SIMPLE_ADDRESS(MODE, X, ADDR) \
1436 if (GET_CODE (tmp) == SUBREG \
1437 && (GET_MODE_SIZE (GET_MODE (tmp)) \
1438 < GET_MODE_SIZE (GET_MODE (SUBREG_REG (tmp))))) \
1439 tmp = SUBREG_REG (tmp); \
1440 if (REG_P (tmp) && REG_OK_FOR_BASE_P (tmp)) \
1442 if (CONSTANT_ADDRESS_P (X)) \
1444 if (GET_CODE (X) == PLUS) \
1446 tmp = XEXP (X, 0); \
1447 if (GET_CODE (tmp) == SUBREG \
1448 && (GET_MODE_SIZE (GET_MODE (tmp)) \
1449 < GET_MODE_SIZE (GET_MODE (SUBREG_REG (tmp))))) \
1450 tmp = SUBREG_REG (tmp); \
1453 if (REG_OK_FP_BASE_P (tmp) \
1454 && GET_CODE (XEXP (X, 1)) == CONST_INT) \
1456 if (REG_OK_FOR_BASE_P (tmp) \
1457 && CONSTANT_ADDRESS_P (XEXP (X, 1))) \
1460 else if (GET_CODE (tmp) == ADDRESSOF \
1461 && CONSTANT_ADDRESS_P (XEXP (X, 1))) \
1466 /* Now accept the simple address, or, for DImode only, an AND of a simple
1467 address that turns off the low three bits. */
1469 #define GO_IF_LEGITIMATE_ADDRESS(MODE, X, ADDR) \
1470 { GO_IF_LEGITIMATE_SIMPLE_ADDRESS (MODE, X, ADDR); \
1471 if ((MODE) == DImode \
1472 && GET_CODE (X) == AND \
1473 && GET_CODE (XEXP (X, 1)) == CONST_INT \
1474 && INTVAL (XEXP (X, 1)) == -8) \
1475 GO_IF_LEGITIMATE_SIMPLE_ADDRESS (MODE, XEXP (X, 0), ADDR); \
1478 /* Try machine-dependent ways of modifying an illegitimate address
1479 to be legitimate. If we find one, return the new, valid address.
1480 This macro is used in only one place: `memory_address' in explow.c.
1482 OLDX is the address as it was before break_out_memory_refs was called.
1483 In some cases it is useful to look at this to decide what needs to be done.
1485 MODE and WIN are passed so that this macro can use
1486 GO_IF_LEGITIMATE_ADDRESS.
1488 It is always safe for this macro to do nothing. It exists to recognize
1489 opportunities to optimize the output.
1491 For the Alpha, there are three cases we handle:
1493 (1) If the address is (plus reg const_int) and the CONST_INT is not a
1494 valid offset, compute the high part of the constant and add it to the
1495 register. Then our address is (plus temp low-part-const).
1496 (2) If the address is (const (plus FOO const_int)), find the low-order
1497 part of the CONST_INT. Then load FOO plus any high-order part of the
1498 CONST_INT into a register. Our address is (plus reg low-part-const).
1499 This is done to reduce the number of GOT entries.
1500 (3) If we have a (plus reg const), emit the load as in (2), then add
1501 the two registers, and finally generate (plus reg low-part-const) as
1504 #define LEGITIMIZE_ADDRESS(X,OLDX,MODE,WIN) \
1505 { if (GET_CODE (X) == PLUS && GET_CODE (XEXP (X, 0)) == REG \
1506 && GET_CODE (XEXP (X, 1)) == CONST_INT \
1507 && ! CONSTANT_ADDRESS_P (XEXP (X, 1))) \
1509 HOST_WIDE_INT val = INTVAL (XEXP (X, 1)); \
1510 HOST_WIDE_INT lowpart = (val & 0xffff) - 2 * (val & 0x8000); \
1511 HOST_WIDE_INT highpart = val - lowpart; \
1512 rtx high = GEN_INT (highpart); \
1513 rtx temp = expand_binop (Pmode, add_optab, XEXP (x, 0), \
1514 high, NULL_RTX, 1, OPTAB_LIB_WIDEN); \
1516 (X) = plus_constant (temp, lowpart); \
1519 else if (GET_CODE (X) == CONST \
1520 && GET_CODE (XEXP (X, 0)) == PLUS \
1521 && GET_CODE (XEXP (XEXP (X, 0), 1)) == CONST_INT) \
1523 HOST_WIDE_INT val = INTVAL (XEXP (XEXP (X, 0), 1)); \
1524 HOST_WIDE_INT lowpart = (val & 0xffff) - 2 * (val & 0x8000); \
1525 HOST_WIDE_INT highpart = val - lowpart; \
1526 rtx high = XEXP (XEXP (X, 0), 0); \
1529 high = plus_constant (high, highpart); \
1531 (X) = plus_constant (force_reg (Pmode, high), lowpart); \
1534 else if (GET_CODE (X) == PLUS && GET_CODE (XEXP (X, 0)) == REG \
1535 && GET_CODE (XEXP (X, 1)) == CONST \
1536 && GET_CODE (XEXP (XEXP (X, 1), 0)) == PLUS \
1537 && GET_CODE (XEXP (XEXP (XEXP (X, 1), 0), 1)) == CONST_INT) \
1539 HOST_WIDE_INT val = INTVAL (XEXP (XEXP (XEXP (X, 1), 0), 1)); \
1540 HOST_WIDE_INT lowpart = (val & 0xffff) - 2 * (val & 0x8000); \
1541 HOST_WIDE_INT highpart = val - lowpart; \
1542 rtx high = XEXP (XEXP (XEXP (X, 1), 0), 0); \
1545 high = plus_constant (high, highpart); \
1547 high = expand_binop (Pmode, add_optab, XEXP (X, 0), \
1548 force_reg (Pmode, high), \
1549 high, 1, OPTAB_LIB_WIDEN); \
1550 (X) = plus_constant (high, lowpart); \
1555 /* Try a machine-dependent way of reloading an illegitimate address
1556 operand. If we find one, push the reload and jump to WIN. This
1557 macro is used in only one place: `find_reloads_address' in reload.c.
1559 For the Alpha, we wish to handle large displacements off a base
1560 register by splitting the addend across an ldah and the mem insn.
1561 This cuts number of extra insns needed from 3 to 1. */
1563 #define LEGITIMIZE_RELOAD_ADDRESS(X,MODE,OPNUM,TYPE,IND_LEVELS,WIN) \
1565 /* We must recognize output that we have already generated ourselves. */ \
1566 if (GET_CODE (X) == PLUS \
1567 && GET_CODE (XEXP (X, 0)) == PLUS \
1568 && GET_CODE (XEXP (XEXP (X, 0), 0)) == REG \
1569 && GET_CODE (XEXP (XEXP (X, 0), 1)) == CONST_INT \
1570 && GET_CODE (XEXP (X, 1)) == CONST_INT) \
1572 push_reload (XEXP (X, 0), NULL_RTX, &XEXP (X, 0), NULL_PTR, \
1573 BASE_REG_CLASS, GET_MODE (X), VOIDmode, 0, 0, \
1577 if (GET_CODE (X) == PLUS \
1578 && GET_CODE (XEXP (X, 0)) == REG \
1579 && REGNO (XEXP (X, 0)) < FIRST_PSEUDO_REGISTER \
1580 && REG_MODE_OK_FOR_BASE_P (XEXP (X, 0), MODE) \
1581 && GET_CODE (XEXP (X, 1)) == CONST_INT) \
1583 HOST_WIDE_INT val = INTVAL (XEXP (X, 1)); \
1584 HOST_WIDE_INT low = ((val & 0xffff) ^ 0x8000) - 0x8000; \
1585 HOST_WIDE_INT high \
1586 = (((val - low) & 0xffffffff) ^ 0x80000000) - 0x80000000; \
1588 /* Check for 32-bit overflow. */ \
1589 if (high + low != val) \
1592 /* Reload the high part into a base reg; leave the low part \
1593 in the mem directly. */ \
1595 X = gen_rtx_PLUS (GET_MODE (X), \
1596 gen_rtx_PLUS (GET_MODE (X), XEXP (X, 0), \
1600 push_reload (XEXP (X, 0), NULL_RTX, &XEXP (X, 0), NULL_PTR, \
1601 BASE_REG_CLASS, GET_MODE (X), VOIDmode, 0, 0, \
1607 /* Go to LABEL if ADDR (a legitimate address expression)
1608 has an effect that depends on the machine mode it is used for.
1609 On the Alpha this is true only for the unaligned modes. We can
1610 simplify this test since we know that the address must be valid. */
1612 #define GO_IF_MODE_DEPENDENT_ADDRESS(ADDR,LABEL) \
1613 { if (GET_CODE (ADDR) == AND) goto LABEL; }
1615 /* Compute the cost of an address. For the Alpha, all valid addresses are
1618 #define ADDRESS_COST(X) 0
1620 /* Machine-dependent reorg pass. */
1621 #define MACHINE_DEPENDENT_REORG(X) alpha_reorg(X)
1623 /* Specify the machine mode that this machine uses
1624 for the index in the tablejump instruction. */
1625 #define CASE_VECTOR_MODE SImode
1627 /* Define as C expression which evaluates to nonzero if the tablejump
1628 instruction expects the table to contain offsets from the address of the
1631 Do not define this if the table should contain absolute addresses.
1632 On the Alpha, the table is really GP-relative, not relative to the PC
1633 of the table, but we pretend that it is PC-relative; this should be OK,
1634 but we should try to find some better way sometime. */
1635 #define CASE_VECTOR_PC_RELATIVE 1
1637 /* Specify the tree operation to be used to convert reals to integers. */
1638 #define IMPLICIT_FIX_EXPR FIX_ROUND_EXPR
1640 /* This is the kind of divide that is easiest to do in the general case. */
1641 #define EASY_DIV_EXPR TRUNC_DIV_EXPR
1643 /* Define this as 1 if `char' should by default be signed; else as 0. */
1644 #define DEFAULT_SIGNED_CHAR 1
1646 /* This flag, if defined, says the same insns that convert to a signed fixnum
1647 also convert validly to an unsigned one.
1649 We actually lie a bit here as overflow conditions are different. But
1650 they aren't being checked anyway. */
1652 #define FIXUNS_TRUNC_LIKE_FIX_TRUNC
1654 /* Max number of bytes we can move to or from memory
1655 in one reasonably fast instruction. */
1659 /* If a memory-to-memory move would take MOVE_RATIO or more simple
1660 move-instruction pairs, we will do a movstr or libcall instead.
1662 Without byte/word accesses, we want no more than four instructions;
1663 with, several single byte accesses are better. */
1665 #define MOVE_RATIO (TARGET_BWX ? 7 : 2)
1667 /* Largest number of bytes of an object that can be placed in a register.
1668 On the Alpha we have plenty of registers, so use TImode. */
1669 #define MAX_FIXED_MODE_SIZE GET_MODE_BITSIZE (TImode)
1671 /* Nonzero if access to memory by bytes is no faster than for words.
1672 Also non-zero if doing byte operations (specifically shifts) in registers
1675 On the Alpha, we want to not use the byte operation and instead use
1676 masking operations to access fields; these will save instructions. */
1678 #define SLOW_BYTE_ACCESS 1
1680 /* Define if operations between registers always perform the operation
1681 on the full register even if a narrower mode is specified. */
1682 #define WORD_REGISTER_OPERATIONS
1684 /* Define if loading in MODE, an integral mode narrower than BITS_PER_WORD
1685 will either zero-extend or sign-extend. The value of this macro should
1686 be the code that says which one of the two operations is implicitly
1687 done, NIL if none. */
1688 #define LOAD_EXTEND_OP(MODE) ((MODE) == SImode ? SIGN_EXTEND : ZERO_EXTEND)
1690 /* Define if loading short immediate values into registers sign extends. */
1691 #define SHORT_IMMEDIATES_SIGN_EXTEND
1693 /* Value is 1 if truncating an integer of INPREC bits to OUTPREC bits
1694 is done just by pretending it is already truncated. */
1695 #define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) 1
1697 /* We assume that the store-condition-codes instructions store 0 for false
1698 and some other value for true. This is the value stored for true. */
1700 #define STORE_FLAG_VALUE 1
1702 /* Define the value returned by a floating-point comparison instruction. */
1704 #define FLOAT_STORE_FLAG_VALUE(MODE) \
1705 REAL_VALUE_ATOF ((TARGET_FLOAT_VAX ? "0.5" : "2.0"), (MODE))
1707 /* Canonicalize a comparison from one we don't have to one we do have. */
1709 #define CANONICALIZE_COMPARISON(CODE,OP0,OP1) \
1711 if (((CODE) == GE || (CODE) == GT || (CODE) == GEU || (CODE) == GTU) \
1712 && (GET_CODE (OP1) == REG || (OP1) == const0_rtx)) \
1717 (CODE) = swap_condition (CODE); \
1719 if (((CODE) == LT || (CODE) == LTU) \
1720 && GET_CODE (OP1) == CONST_INT && INTVAL (OP1) == 256) \
1722 (CODE) = (CODE) == LT ? LE : LEU; \
1723 (OP1) = GEN_INT (255); \
1727 /* Specify the machine mode that pointers have.
1728 After generation of rtl, the compiler makes no further distinction
1729 between pointers and any other objects of this machine mode. */
1730 #define Pmode DImode
1732 /* Mode of a function address in a call instruction (for indexing purposes). */
1734 #define FUNCTION_MODE Pmode
1736 /* Define this if addresses of constant functions
1737 shouldn't be put through pseudo regs where they can be cse'd.
1738 Desirable on machines where ordinary constants are expensive
1739 but a CALL with constant address is cheap.
1741 We define this on the Alpha so that gen_call and gen_call_value
1742 get to see the SYMBOL_REF (for the hint field of the jsr). It will
1743 then copy it into a register, thus actually letting the address be
1746 #define NO_FUNCTION_CSE
1748 /* Define this to be nonzero if shift instructions ignore all but the low-order
1750 #define SHIFT_COUNT_TRUNCATED 1
1752 /* The EV4 is dual issue; EV5/EV6 are quad issue. */
1753 #define ISSUE_RATE (alpha_cpu == PROCESSOR_EV4 ? 2 : 4)
1755 /* Describe the fact that MULTI instructions are multiple instructions
1756 and so to assume they don't pair with anything. */
1757 #define MD_SCHED_VARIABLE_ISSUE(DUMP, SCHED_VERBOSE, INSN, CAN_ISSUE_MORE) \
1758 if (recog_memoized (INSN) < 0 || get_attr_type (INSN) == TYPE_MULTI) \
1759 (CAN_ISSUE_MORE) = 0
1761 /* Compute the cost of computing a constant rtl expression RTX
1762 whose rtx-code is CODE. The body of this macro is a portion
1763 of a switch statement. If the code is computed here,
1764 return it with a return statement. Otherwise, break from the switch.
1766 If this is an 8-bit constant, return zero since it can be used
1767 nearly anywhere with no cost. If it is a valid operand for an
1768 ADD or AND, likewise return 0 if we know it will be used in that
1769 context. Otherwise, return 2 since it might be used there later.
1770 All other constants take at least two insns. */
1772 #define CONST_COSTS(RTX,CODE,OUTER_CODE) \
1774 if (INTVAL (RTX) >= 0 && INTVAL (RTX) < 256) \
1776 case CONST_DOUBLE: \
1777 if ((RTX) == CONST0_RTX (GET_MODE (RTX))) \
1779 else if (((OUTER_CODE) == PLUS && add_operand (RTX, VOIDmode)) \
1780 || ((OUTER_CODE) == AND && and_operand (RTX, VOIDmode))) \
1782 else if (add_operand (RTX, VOIDmode) || and_operand (RTX, VOIDmode)) \
1785 return COSTS_N_INSNS (2); \
1789 switch (alpha_cpu) \
1791 case PROCESSOR_EV4: \
1792 return COSTS_N_INSNS (3); \
1793 case PROCESSOR_EV5: \
1794 case PROCESSOR_EV6: \
1795 return COSTS_N_INSNS (2); \
1799 /* Provide the costs of a rtl expression. This is in the body of a
1802 #define RTX_COSTS(X,CODE,OUTER_CODE) \
1803 case PLUS: case MINUS: \
1804 if (FLOAT_MODE_P (GET_MODE (X))) \
1805 switch (alpha_cpu) \
1807 case PROCESSOR_EV4: \
1808 return COSTS_N_INSNS (6); \
1809 case PROCESSOR_EV5: \
1810 case PROCESSOR_EV6: \
1811 return COSTS_N_INSNS (4); \
1814 else if (GET_CODE (XEXP (X, 0)) == MULT \
1815 && const48_operand (XEXP (XEXP (X, 0), 1), VOIDmode)) \
1816 return (2 + rtx_cost (XEXP (XEXP (X, 0), 0), OUTER_CODE) \
1817 + rtx_cost (XEXP (X, 1), OUTER_CODE)); \
1820 switch (alpha_cpu) \
1822 case PROCESSOR_EV4: \
1823 if (FLOAT_MODE_P (GET_MODE (X))) \
1824 return COSTS_N_INSNS (6); \
1825 return COSTS_N_INSNS (23); \
1826 case PROCESSOR_EV5: \
1827 if (FLOAT_MODE_P (GET_MODE (X))) \
1828 return COSTS_N_INSNS (4); \
1829 else if (GET_MODE (X) == DImode) \
1830 return COSTS_N_INSNS (12); \
1832 return COSTS_N_INSNS (8); \
1833 case PROCESSOR_EV6: \
1834 if (FLOAT_MODE_P (GET_MODE (X))) \
1835 return COSTS_N_INSNS (4); \
1837 return COSTS_N_INSNS (7); \
1841 if (GET_CODE (XEXP (X, 1)) == CONST_INT \
1842 && INTVAL (XEXP (X, 1)) <= 3) \
1844 /* ... fall through ... */ \
1845 case ASHIFTRT: case LSHIFTRT: \
1846 switch (alpha_cpu) \
1848 case PROCESSOR_EV4: \
1849 return COSTS_N_INSNS (2); \
1850 case PROCESSOR_EV5: \
1851 case PROCESSOR_EV6: \
1852 return COSTS_N_INSNS (1); \
1855 case IF_THEN_ELSE: \
1856 switch (alpha_cpu) \
1858 case PROCESSOR_EV4: \
1859 case PROCESSOR_EV6: \
1860 return COSTS_N_INSNS (2); \
1861 case PROCESSOR_EV5: \
1862 return COSTS_N_INSNS (1); \
1865 case DIV: case UDIV: case MOD: case UMOD: \
1866 switch (alpha_cpu) \
1868 case PROCESSOR_EV4: \
1869 if (GET_MODE (X) == SFmode) \
1870 return COSTS_N_INSNS (34); \
1871 else if (GET_MODE (X) == DFmode) \
1872 return COSTS_N_INSNS (63); \
1874 return COSTS_N_INSNS (70); \
1875 case PROCESSOR_EV5: \
1876 if (GET_MODE (X) == SFmode) \
1877 return COSTS_N_INSNS (15); \
1878 else if (GET_MODE (X) == DFmode) \
1879 return COSTS_N_INSNS (22); \
1881 return COSTS_N_INSNS (70); /* ??? */ \
1882 case PROCESSOR_EV6: \
1883 if (GET_MODE (X) == SFmode) \
1884 return COSTS_N_INSNS (12); \
1885 else if (GET_MODE (X) == DFmode) \
1886 return COSTS_N_INSNS (15); \
1888 return COSTS_N_INSNS (70); /* ??? */ \
1892 switch (alpha_cpu) \
1894 case PROCESSOR_EV4: \
1895 case PROCESSOR_EV6: \
1896 return COSTS_N_INSNS (3); \
1897 case PROCESSOR_EV5: \
1898 return COSTS_N_INSNS (2); \
1901 case NEG: case ABS: \
1902 if (! FLOAT_MODE_P (GET_MODE (X))) \
1904 /* ... fall through ... */ \
1905 case FLOAT: case UNSIGNED_FLOAT: case FIX: case UNSIGNED_FIX: \
1906 case FLOAT_EXTEND: case FLOAT_TRUNCATE: \
1907 switch (alpha_cpu) \
1909 case PROCESSOR_EV4: \
1910 return COSTS_N_INSNS (6); \
1911 case PROCESSOR_EV5: \
1912 case PROCESSOR_EV6: \
1913 return COSTS_N_INSNS (4); \
1917 /* Control the assembler format that we output. */
1919 /* We don't emit these labels, so as to avoid getting linker errors about
1920 missing exception handling info. If we emit a gcc_compiled. label into
1921 text, and the file has no code, then the DEC assembler gives us a zero
1922 sized text section with no associated exception handling info. The
1923 DEC linker sees this text section, and gives a warning saying that
1924 the exception handling info is missing. */
1925 #define ASM_IDENTIFY_GCC(x)
1926 #define ASM_IDENTIFY_LANGUAGE(x)
1928 /* Output to assembler file text saying following lines
1929 may contain character constants, extra white space, comments, etc. */
1931 #define ASM_APP_ON ""
1933 /* Output to assembler file text saying following lines
1934 no longer contain unusual constructs. */
1936 #define ASM_APP_OFF ""
1938 #define TEXT_SECTION_ASM_OP ".text"
1940 /* Output before read-only data. */
1942 #define READONLY_DATA_SECTION_ASM_OP ".rdata"
1944 /* Output before writable data. */
1946 #define DATA_SECTION_ASM_OP ".data"
1948 /* Define an extra section for read-only data, a routine to enter it, and
1949 indicate that it is for read-only data.
1951 The first time we enter the readonly data section for a file, we write
1952 eight bytes of zero. This works around a bug in DEC's assembler in
1953 some versions of OSF/1 V3.x. */
1955 #define EXTRA_SECTIONS readonly_data
1957 #define EXTRA_SECTION_FUNCTIONS \
1959 literal_section () \
1961 if (in_section != readonly_data) \
1963 static int firsttime = 1; \
1965 fprintf (asm_out_file, "%s\n", READONLY_DATA_SECTION_ASM_OP); \
1969 ASM_OUTPUT_DOUBLE_INT (asm_out_file, const0_rtx); \
1972 in_section = readonly_data; \
1976 #define READONLY_DATA_SECTION literal_section
1978 /* If we are referencing a function that is static, make the SYMBOL_REF
1979 special. We use this to see indicate we can branch to this function
1980 without setting PV or restoring GP. */
1982 #define ENCODE_SECTION_INFO(DECL) \
1983 if (TREE_CODE (DECL) == FUNCTION_DECL && ! TREE_PUBLIC (DECL)) \
1984 SYMBOL_REF_FLAG (XEXP (DECL_RTL (DECL), 0)) = 1;
1986 /* How to refer to registers in assembler output.
1987 This sequence is indexed by compiler's hard-register-number (see above). */
1989 #define REGISTER_NAMES \
1990 {"$0", "$1", "$2", "$3", "$4", "$5", "$6", "$7", "$8", \
1991 "$9", "$10", "$11", "$12", "$13", "$14", "$15", \
1992 "$16", "$17", "$18", "$19", "$20", "$21", "$22", "$23", \
1993 "$24", "$25", "$26", "$27", "$28", "$29", "$30", "AP", \
1994 "$f0", "$f1", "$f2", "$f3", "$f4", "$f5", "$f6", "$f7", "$f8", \
1995 "$f9", "$f10", "$f11", "$f12", "$f13", "$f14", "$f15", \
1996 "$f16", "$f17", "$f18", "$f19", "$f20", "$f21", "$f22", "$f23",\
1997 "$f24", "$f25", "$f26", "$f27", "$f28", "$f29", "$f30", "FP"}
1999 /* How to renumber registers for dbx and gdb. */
2001 #define DBX_REGISTER_NUMBER(REGNO) (REGNO)
2003 /* This is how to output the definition of a user-level label named NAME,
2004 such as the label on a static function or variable NAME. */
2006 #define ASM_OUTPUT_LABEL(FILE,NAME) \
2007 do { assemble_name (FILE, NAME); fputs (":\n", FILE); } while (0)
2009 /* This is how to output a command to make the user-level label named NAME
2010 defined for reference from other files. */
2012 #define ASM_GLOBALIZE_LABEL(FILE,NAME) \
2013 do { fputs ("\t.globl ", FILE); assemble_name (FILE, NAME); fputs ("\n", FILE);} while (0)
2015 /* The prefix to add to user-visible assembler symbols. */
2017 #define USER_LABEL_PREFIX ""
2019 /* This is how to output an internal numbered label where
2020 PREFIX is the class of label and NUM is the number within the class. */
2022 #define ASM_OUTPUT_INTERNAL_LABEL(FILE,PREFIX,NUM) \
2023 fprintf (FILE, "$%s%d:\n", PREFIX, NUM)
2025 /* This is how to output a label for a jump table. Arguments are the same as
2026 for ASM_OUTPUT_INTERNAL_LABEL, except the insn for the jump table is
2029 #define ASM_OUTPUT_CASE_LABEL(FILE,PREFIX,NUM,TABLEINSN) \
2030 { ASM_OUTPUT_ALIGN (FILE, 2); ASM_OUTPUT_INTERNAL_LABEL (FILE, PREFIX, NUM); }
2032 /* This is how to store into the string LABEL
2033 the symbol_ref name of an internal numbered label where
2034 PREFIX is the class of label and NUM is the number within the class.
2035 This is suitable for output with `assemble_name'. */
2037 #define ASM_GENERATE_INTERNAL_LABEL(LABEL,PREFIX,NUM) \
2038 sprintf ((LABEL), "*$%s%ld", (PREFIX), (long)(NUM))
2040 /* Check a floating-point value for validity for a particular machine mode. */
2042 #define CHECK_FLOAT_VALUE(MODE, D, OVERFLOW) \
2043 ((OVERFLOW) = check_float_value (MODE, &D, OVERFLOW))
2045 /* This is how to output an assembler line defining a `long double'
2048 #define ASM_OUTPUT_LONG_DOUBLE(FILE,VALUE) \
2051 REAL_VALUE_TO_TARGET_LONG_DOUBLE ((VALUE), t); \
2052 fprintf (FILE, "\t.quad 0x%lx%08lx,0x%lx%08lx\n", \
2053 t[1] & 0xffffffff, t[0] & 0xffffffff, \
2054 t[3] & 0xffffffff, t[2] & 0xffffffff); \
2057 /* This is how to output an assembler line defining a `double' constant. */
2059 #define ASM_OUTPUT_DOUBLE(FILE,VALUE) \
2062 REAL_VALUE_TO_TARGET_DOUBLE ((VALUE), t); \
2063 fprintf (FILE, "\t.quad 0x%lx%08lx\n", \
2064 t[1] & 0xffffffff, t[0] & 0xffffffff); \
2067 /* This is how to output an assembler line defining a `float' constant. */
2069 #define ASM_OUTPUT_FLOAT(FILE,VALUE) \
2072 REAL_VALUE_TO_TARGET_SINGLE ((VALUE), t); \
2073 fprintf (FILE, "\t.long 0x%lx\n", t & 0xffffffff); \
2076 /* This is how to output an assembler line defining an `int' constant. */
2078 #define ASM_OUTPUT_INT(FILE,VALUE) \
2079 ( fprintf (FILE, "\t.long "), \
2080 output_addr_const (FILE, (VALUE)), \
2081 fprintf (FILE, "\n"))
2083 /* This is how to output an assembler line defining a `long' constant. */
2085 #define ASM_OUTPUT_DOUBLE_INT(FILE,VALUE) \
2086 ( fprintf (FILE, "\t.quad "), \
2087 output_addr_const (FILE, (VALUE)), \
2088 fprintf (FILE, "\n"))
2090 /* Likewise for `char' and `short' constants. */
2092 #define ASM_OUTPUT_SHORT(FILE,VALUE) \
2093 fprintf (FILE, "\t.word %d\n", \
2094 (int)(GET_CODE (VALUE) == CONST_INT \
2095 ? INTVAL (VALUE) & 0xffff : (abort (), 0)))
2097 #define ASM_OUTPUT_CHAR(FILE,VALUE) \
2098 fprintf (FILE, "\t.byte %d\n", \
2099 (int)(GET_CODE (VALUE) == CONST_INT \
2100 ? INTVAL (VALUE) & 0xff : (abort (), 0)))
2102 /* We use the default ASCII-output routine, except that we don't write more
2103 than 50 characters since the assembler doesn't support very long lines. */
2105 #define ASM_OUTPUT_ASCII(MYFILE, MYSTRING, MYLENGTH) \
2107 FILE *_hide_asm_out_file = (MYFILE); \
2108 const unsigned char *_hide_p = (const unsigned char *) (MYSTRING); \
2109 int _hide_thissize = (MYLENGTH); \
2110 int _size_so_far = 0; \
2112 FILE *asm_out_file = _hide_asm_out_file; \
2113 const unsigned char *p = _hide_p; \
2114 int thissize = _hide_thissize; \
2116 fprintf (asm_out_file, "\t.ascii \""); \
2118 for (i = 0; i < thissize; i++) \
2120 register int c = p[i]; \
2122 if (_size_so_far ++ > 50 && i < thissize - 4) \
2123 _size_so_far = 0, fprintf (asm_out_file, "\"\n\t.ascii \""); \
2125 if (c == '\"' || c == '\\') \
2126 putc ('\\', asm_out_file); \
2127 if (c >= ' ' && c < 0177) \
2128 putc (c, asm_out_file); \
2131 fprintf (asm_out_file, "\\%o", c); \
2132 /* After an octal-escape, if a digit follows, \
2133 terminate one string constant and start another. \
2134 The Vax assembler fails to stop reading the escape \
2135 after three digits, so this is the only way we \
2136 can get it to parse the data properly. */ \
2137 if (i < thissize - 1 \
2138 && p[i + 1] >= '0' && p[i + 1] <= '9') \
2139 _size_so_far = 0, fprintf (asm_out_file, "\"\n\t.ascii \""); \
2142 fprintf (asm_out_file, "\"\n"); \
2147 /* To get unaligned data, we have to turn off auto alignment. */
2148 #define UNALIGNED_SHORT_ASM_OP ".align 0\n\t.word"
2149 #define UNALIGNED_INT_ASM_OP ".align 0\n\t.long"
2150 #define UNALIGNED_DOUBLE_INT_ASM_OP ".align 0\n\t.quad"
2152 /* This is how to output an insn to push a register on the stack.
2153 It need not be very fast code. */
2155 #define ASM_OUTPUT_REG_PUSH(FILE,REGNO) \
2156 fprintf (FILE, "\tsubq $30,8,$30\n\tst%s $%s%d,0($30)\n", \
2157 (REGNO) > 32 ? "t" : "q", (REGNO) > 32 ? "f" : "", \
2160 /* This is how to output an insn to pop a register from the stack.
2161 It need not be very fast code. */
2163 #define ASM_OUTPUT_REG_POP(FILE,REGNO) \
2164 fprintf (FILE, "\tld%s $%s%d,0($30)\n\taddq $30,8,$30\n", \
2165 (REGNO) > 32 ? "t" : "q", (REGNO) > 32 ? "f" : "", \
2168 /* This is how to output an assembler line for a numeric constant byte. */
2170 #define ASM_OUTPUT_BYTE(FILE,VALUE) \
2171 fprintf (FILE, "\t.byte 0x%x\n", (int) ((VALUE) & 0xff))
2173 /* This is how to output an element of a case-vector that is absolute.
2174 (Alpha does not use such vectors, but we must define this macro anyway.) */
2176 #define ASM_OUTPUT_ADDR_VEC_ELT(FILE, VALUE) abort ()
2178 /* This is how to output an element of a case-vector that is relative. */
2180 #define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, BODY, VALUE, REL) \
2181 fprintf (FILE, "\t.%s $L%d\n", TARGET_WINDOWS_NT ? "long" : "gprel32", \
2184 /* This is how to output an assembler line
2185 that says to advance the location counter
2186 to a multiple of 2**LOG bytes. */
2188 #define ASM_OUTPUT_ALIGN(FILE,LOG) \
2190 fprintf (FILE, "\t.align %d\n", LOG);
2192 /* This is how to advance the location counter by SIZE bytes. */
2194 #define ASM_OUTPUT_SKIP(FILE,SIZE) \
2195 fprintf (FILE, "\t.space %d\n", (SIZE))
2197 /* This says how to output an assembler line
2198 to define a global common symbol. */
2200 #define ASM_OUTPUT_COMMON(FILE, NAME, SIZE, ROUNDED) \
2201 ( fputs ("\t.comm ", (FILE)), \
2202 assemble_name ((FILE), (NAME)), \
2203 fprintf ((FILE), ",%d\n", (SIZE)))
2205 /* This says how to output an assembler line
2206 to define a local common symbol. */
2208 #define ASM_OUTPUT_LOCAL(FILE, NAME, SIZE,ROUNDED) \
2209 ( fputs ("\t.lcomm ", (FILE)), \
2210 assemble_name ((FILE), (NAME)), \
2211 fprintf ((FILE), ",%d\n", (SIZE)))
2213 /* Store in OUTPUT a string (made with alloca) containing
2214 an assembler-name for a local static variable named NAME.
2215 LABELNO is an integer which is different for each call. */
2217 #define ASM_FORMAT_PRIVATE_NAME(OUTPUT, NAME, LABELNO) \
2218 ( (OUTPUT) = (char *) alloca (strlen ((NAME)) + 10), \
2219 sprintf ((OUTPUT), "%s.%d", (NAME), (LABELNO)))
2221 /* Define the parentheses used to group arithmetic operations
2222 in assembler code. */
2224 #define ASM_OPEN_PAREN "("
2225 #define ASM_CLOSE_PAREN ")"
2227 /* Output code to add DELTA to the first argument, and then jump to FUNCTION.
2228 Used for C++ multiple inheritance. */
2230 #define ASM_OUTPUT_MI_THUNK(FILE, THUNK_FNDECL, DELTA, FUNCTION) \
2232 const char *fn_name = XSTR (XEXP (DECL_RTL (FUNCTION), 0), 0); \
2235 /* Mark end of prologue. */ \
2236 output_end_prologue (FILE); \
2238 /* Rely on the assembler to macro expand a large delta. */ \
2239 fprintf (FILE, "\t.set at\n"); \
2240 reg = aggregate_value_p (TREE_TYPE (TREE_TYPE (FUNCTION))) ? 17 : 16; \
2241 fprintf (FILE, "\tlda $%d,%ld($%d)\n", reg, (long)(DELTA), reg); \
2243 if (current_file_function_operand (XEXP (DECL_RTL (FUNCTION), 0), \
2246 fprintf (FILE, "\tbr $31,$"); \
2247 assemble_name (FILE, fn_name); \
2248 fprintf (FILE, "..ng\n"); \
2252 fprintf (FILE, "\tjmp $31,"); \
2253 assemble_name (FILE, fn_name); \
2254 fputc ('\n', FILE); \
2256 fprintf (FILE, "\t.set noat\n"); \
2260 /* Define results of standard character escape sequences. */
2261 #define TARGET_BELL 007
2262 #define TARGET_BS 010
2263 #define TARGET_TAB 011
2264 #define TARGET_NEWLINE 012
2265 #define TARGET_VT 013
2266 #define TARGET_FF 014
2267 #define TARGET_CR 015
2269 /* Print operand X (an rtx) in assembler syntax to file FILE.
2270 CODE is a letter or dot (`z' in `%z0') or 0 if no letter was specified.
2271 For `%' followed by punctuation, CODE is the punctuation and X is null. */
2273 #define PRINT_OPERAND(FILE, X, CODE) print_operand (FILE, X, CODE)
2275 /* Determine which codes are valid without a following integer. These must
2278 ~ Generates the name of the current function.
2280 & Generates fp-rounding mode suffix: nothing for normal, 'c' for
2281 chopped, 'm' for minus-infinity, and 'd' for dynamic rounding
2282 mode. alpha_fprm controls which suffix is generated.
2284 ' Generates trap-mode suffix for instructions that accept the
2285 su suffix only (cmpt et al).
2287 ` Generates trap-mode suffix for instructions that accept the
2288 v and sv suffix. The only instruction that needs this is cvtql.
2290 ( Generates trap-mode suffix for instructions that accept the
2291 v, sv, and svi suffix. The only instruction that needs this
2294 ) Generates trap-mode suffix for instructions that accept the
2295 u, su, and sui suffix. This is the bulk of the IEEE floating
2296 point instructions (addt et al).
2298 + Generates trap-mode suffix for instructions that accept the
2299 sui suffix (cvtqt and cvtqs).
2301 , Generates single precision suffix for floating point
2302 instructions (s for IEEE, f for VAX)
2304 - Generates double precision suffix for floating point
2305 instructions (t for IEEE, g for VAX)
2308 #define PRINT_OPERAND_PUNCT_VALID_P(CODE) \
2309 ((CODE) == '&' || (CODE) == '`' || (CODE) == '\'' || (CODE) == '(' \
2310 || (CODE) == ')' || (CODE) == '+' || (CODE) == ',' || (CODE) == '-' \
2313 /* Print a memory address as an operand to reference that memory location. */
2315 #define PRINT_OPERAND_ADDRESS(FILE, ADDR) \
2316 print_operand_address((FILE), (ADDR))
2318 /* Define the codes that are matched by predicates in alpha.c. */
2320 #define PREDICATE_CODES \
2321 {"reg_or_0_operand", {SUBREG, REG, CONST_INT}}, \
2322 {"reg_or_6bit_operand", {SUBREG, REG, CONST_INT}}, \
2323 {"reg_or_8bit_operand", {SUBREG, REG, CONST_INT}}, \
2324 {"cint8_operand", {CONST_INT}}, \
2325 {"reg_or_cint_operand", {SUBREG, REG, CONST_INT}}, \
2326 {"add_operand", {SUBREG, REG, CONST_INT}}, \
2327 {"sext_add_operand", {SUBREG, REG, CONST_INT}}, \
2328 {"const48_operand", {CONST_INT}}, \
2329 {"and_operand", {SUBREG, REG, CONST_INT}}, \
2330 {"or_operand", {SUBREG, REG, CONST_INT}}, \
2331 {"mode_mask_operand", {CONST_INT}}, \
2332 {"mul8_operand", {CONST_INT}}, \
2333 {"mode_width_operand", {CONST_INT}}, \
2334 {"reg_or_fp0_operand", {SUBREG, REG, CONST_DOUBLE}}, \
2335 {"alpha_comparison_operator", {EQ, LE, LT, LEU, LTU}}, \
2336 {"alpha_zero_comparison_operator", {EQ, NE, LE, LT, LEU, LTU}}, \
2337 {"alpha_swapped_comparison_operator", {EQ, GE, GT, GEU, GTU}}, \
2338 {"signed_comparison_operator", {EQ, NE, LE, LT, GE, GT}}, \
2339 {"alpha_fp_comparison_operator", {EQ, LE, LT, UNORDERED}}, \
2340 {"divmod_operator", {DIV, MOD, UDIV, UMOD}}, \
2341 {"fp0_operand", {CONST_DOUBLE}}, \
2342 {"current_file_function_operand", {SYMBOL_REF}}, \
2343 {"call_operand", {REG, SYMBOL_REF}}, \
2344 {"input_operand", {SUBREG, REG, MEM, CONST_INT, CONST_DOUBLE, \
2345 SYMBOL_REF, CONST, LABEL_REF}}, \
2346 {"some_operand", {SUBREG, REG, MEM, CONST_INT, CONST_DOUBLE, \
2347 SYMBOL_REF, CONST, LABEL_REF}}, \
2348 {"some_ni_operand", {SUBREG, REG, MEM}}, \
2349 {"aligned_memory_operand", {MEM}}, \
2350 {"unaligned_memory_operand", {MEM}}, \
2351 {"reg_or_unaligned_mem_operand", {SUBREG, REG, MEM}}, \
2352 {"any_memory_operand", {MEM}}, \
2353 {"hard_fp_register_operand", {SUBREG, REG}}, \
2354 {"hard_int_register_operand", {SUBREG, REG}}, \
2355 {"reg_not_elim_operand", {SUBREG, REG}}, \
2356 {"reg_no_subreg_operand", {REG}}, \
2357 {"addition_operation", {PLUS}},
2359 /* Define the `__builtin_va_list' type for the ABI. */
2360 #define BUILD_VA_LIST_TYPE(VALIST) \
2361 (VALIST) = alpha_build_va_list ()
2363 /* Implement `va_start' for varargs and stdarg. */
2364 #define EXPAND_BUILTIN_VA_START(stdarg, valist, nextarg) \
2365 alpha_va_start (stdarg, valist, nextarg)
2367 /* Implement `va_arg'. */
2368 #define EXPAND_BUILTIN_VA_ARG(valist, type) \
2369 alpha_va_arg (valist, type)
2371 /* Tell collect that the object format is ECOFF. */
2372 #define OBJECT_FORMAT_COFF
2373 #define EXTENDED_COFF
2375 /* If we use NM, pass -g to it so it only lists globals. */
2376 #define NM_FLAGS "-pg"
2378 /* Definitions for debugging. */
2380 #define SDB_DEBUGGING_INFO /* generate info for mips-tfile */
2381 #define DBX_DEBUGGING_INFO /* generate embedded stabs */
2382 #define MIPS_DEBUGGING_INFO /* MIPS specific debugging info */
2384 #ifndef PREFERRED_DEBUGGING_TYPE /* assume SDB_DEBUGGING_INFO */
2385 #define PREFERRED_DEBUGGING_TYPE SDB_DEBUG
2389 /* Correct the offset of automatic variables and arguments. Note that
2390 the Alpha debug format wants all automatic variables and arguments
2391 to be in terms of two different offsets from the virtual frame pointer,
2392 which is the stack pointer before any adjustment in the function.
2393 The offset for the argument pointer is fixed for the native compiler,
2394 it is either zero (for the no arguments case) or large enough to hold
2395 all argument registers.
2396 The offset for the auto pointer is the fourth argument to the .frame
2397 directive (local_offset).
2398 To stay compatible with the native tools we use the same offsets
2399 from the virtual frame pointer and adjust the debugger arg/auto offsets
2400 accordingly. These debugger offsets are set up in output_prolog. */
2402 extern long alpha_arg_offset;
2403 extern long alpha_auto_offset;
2404 #define DEBUGGER_AUTO_OFFSET(X) \
2405 ((GET_CODE (X) == PLUS ? INTVAL (XEXP (X, 1)) : 0) + alpha_auto_offset)
2406 #define DEBUGGER_ARG_OFFSET(OFFSET, X) (OFFSET + alpha_arg_offset)
2409 #define ASM_OUTPUT_SOURCE_LINE(STREAM, LINE) \
2410 alpha_output_lineno (STREAM, LINE)
2412 #define ASM_OUTPUT_SOURCE_FILENAME(STREAM, NAME) \
2413 alpha_output_filename (STREAM, NAME)
2415 /* mips-tfile.c limits us to strings of one page. We must underestimate this
2416 number, because the real length runs past this up to the next
2417 continuation point. This is really a dbxout.c bug. */
2418 #define DBX_CONTIN_LENGTH 3000
2420 /* By default, turn on GDB extensions. */
2421 #define DEFAULT_GDB_EXTENSIONS 1
2423 /* Stabs-in-ECOFF can't handle dbxout_function_end(). */
2424 #define NO_DBX_FUNCTION_END 1
2426 /* If we are smuggling stabs through the ALPHA ECOFF object
2427 format, put a comment in front of the .stab<x> operation so
2428 that the ALPHA assembler does not choke. The mips-tfile program
2429 will correctly put the stab into the object file. */
2431 #define ASM_STABS_OP ((TARGET_GAS) ? ".stabs" : " #.stabs")
2432 #define ASM_STABN_OP ((TARGET_GAS) ? ".stabn" : " #.stabn")
2433 #define ASM_STABD_OP ((TARGET_GAS) ? ".stabd" : " #.stabd")
2435 /* Forward references to tags are allowed. */
2436 #define SDB_ALLOW_FORWARD_REFERENCES
2438 /* Unknown tags are also allowed. */
2439 #define SDB_ALLOW_UNKNOWN_REFERENCES
2441 #define PUT_SDB_DEF(a) \
2443 fprintf (asm_out_file, "\t%s.def\t", \
2444 (TARGET_GAS) ? "" : "#"); \
2445 ASM_OUTPUT_LABELREF (asm_out_file, a); \
2446 fputc (';', asm_out_file); \
2449 #define PUT_SDB_PLAIN_DEF(a) \
2451 fprintf (asm_out_file, "\t%s.def\t.%s;", \
2452 (TARGET_GAS) ? "" : "#", (a)); \
2455 #define PUT_SDB_TYPE(a) \
2457 fprintf (asm_out_file, "\t.type\t0x%x;", (a)); \
2460 /* For block start and end, we create labels, so that
2461 later we can figure out where the correct offset is.
2462 The normal .ent/.end serve well enough for functions,
2463 so those are just commented out. */
2465 extern int sdb_label_count; /* block start/end next label # */
2467 #define PUT_SDB_BLOCK_START(LINE) \
2469 fprintf (asm_out_file, \
2470 "$Lb%d:\n\t%s.begin\t$Lb%d\t%d\n", \
2472 (TARGET_GAS) ? "" : "#", \
2475 sdb_label_count++; \
2478 #define PUT_SDB_BLOCK_END(LINE) \
2480 fprintf (asm_out_file, \
2481 "$Le%d:\n\t%s.bend\t$Le%d\t%d\n", \
2483 (TARGET_GAS) ? "" : "#", \
2486 sdb_label_count++; \
2489 #define PUT_SDB_FUNCTION_START(LINE)
2491 #define PUT_SDB_FUNCTION_END(LINE)
2493 #define PUT_SDB_EPILOGUE_END(NAME) ((void)(NAME))
2495 /* Macros for mips-tfile.c to encapsulate stabs in ECOFF, and for
2496 mips-tdump.c to print them out.
2498 These must match the corresponding definitions in gdb/mipsread.c.
2499 Unfortunately, gcc and gdb do not currently share any directories. */
2501 #define CODE_MASK 0x8F300
2502 #define MIPS_IS_STAB(sym) (((sym)->index & 0xFFF00) == CODE_MASK)
2503 #define MIPS_MARK_STAB(code) ((code)+CODE_MASK)
2504 #define MIPS_UNMARK_STAB(code) ((code)-CODE_MASK)
2506 /* Override some mips-tfile definitions. */
2508 #define SHASH_SIZE 511
2509 #define THASH_SIZE 55
2511 /* Align ecoff symbol tables to avoid OSF1/1.3 nm complaints. */
2513 #define ALIGN_SYMTABLE_OFFSET(OFFSET) (((OFFSET) + 7) & ~7)
2515 /* The linker will stick __main into the .init section. */
2516 #define HAS_INIT_SECTION
2517 #define LD_INIT_SWITCH "-init"
2518 #define LD_FINI_SWITCH "-fini"
2520 /* The system headers under Alpha systems are generally C++-aware. */
2521 #define NO_IMPLICIT_EXTERN_C
2523 /* Generate calls to memcpy, etc., not bcopy, etc. */
2524 #define TARGET_MEM_FUNCTIONS 1