gcc/config.gcc

   1 # GCC target-specific configuration file.
   2 # Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
   3 # 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc.
   4
   5 #This file is part of GCC.
   6
   7 #GCC is free software; you can redistribute it and/or modify it under
   8 #the terms of the GNU General Public License as published by the Free
   9 #Software Foundation; either version 3, or (at your option) any later
  10 #version.
  11
  12 #GCC is distributed in the hope that it will be useful, but WITHOUT
  13 #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  14 #FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  15 #for more details.
  16
  17 #You should have received a copy of the GNU General Public License
  18 #along with GCC; see the file COPYING3.  If not see
  19 #<http://www.gnu.org/licenses/>.
  20
  21 # This is the GCC target-specific configuration file
  22 # where a configuration type is mapped to different system-specific
  23 # definitions and files.  This is invoked by the autoconf-generated
  24 # configure script.  Putting it in a separate shell file lets us skip
  25 # running autoconf when modifying target-specific information.
  26
  27 # When you change the cases in the OS or target switches, consider
  28 # updating ../libgcc/config.host also.
  29
  30 # This file switches on the shell variable ${target}, and also uses the
  31 # following shell variables:
  32 #
  33 #  with_*               Various variables as set by configure.
  34 #
  35 #  enable_threads       Either the name, yes or no depending on whether
  36 #                       threads support was requested.
  37 #
  38 #  default_use_cxa_atexit
  39 #                         The default value for the $enable___cxa_atexit
  40 #                       variable.  enable___cxa_atexit needs to be set to
  41 #                       "yes" for the correct operation of C++ destructors
  42 #                       but it relies upon the presence of a non-standard C
  43 #                       library function called __cxa_atexit.
  44 #                         Since not all C libraries provide __cxa_atexit the
  45 #                       default value of $default_use_cxa_atexit is set to
  46 #                       "no" except for targets which are known to be OK.
  47 #
  48 #  default_gnu_indirect_function
  49 #                       The default value for the $enable_gnu_indirect_function
  50 #                       variable.  enable_gnu_indirect_function relies
  51 #                       upon the presence of a non-standard gnu ifunc support
  52 #                       in the assembler, linker and dynamic linker.
  53 #                       Since not all libraries provide the dynamic linking
  54 #                       support, the default value of
  55 #                       $default_gnu_indirect_function is set to
  56 #                       "no" except for targets which are known to be OK.
  57 #
  58 #  gas_flag             Either yes or no depending on whether GNU as was
  59 #                       requested.
  60 #
  61 #  gnu_ld_flag          Either yes or no depending on whether GNU ld was
  62 #                       requested.
  63
  64 # This file sets the following shell variables for use by the
  65 # autoconf-generated configure script:
  66 #
  67 #  cpu_type             The name of the cpu, if different from the first
  68 #                       chunk of the canonical target name.
  69 #
  70 #  tm_defines           List of target macros to define for all compilations.
  71 #
  72 #  tm_file              A list of target macro files, if different from
  73 #                       "$cpu_type/$cpu_type.h". Usually it's constructed
  74 #                       per target in a way like this:
  75 #                       tm_file="${tm_file} dbxelf.h elfos.h ${cpu_type.h}/elf.h"
  76 #                       Note that the preferred order is:
  77 #                       - specific target header "${cpu_type}/${cpu_type.h}"
  78 #                       - generic headers like dbxelf.h elfos.h, etc.
  79 #                       - specializing target headers like ${cpu_type.h}/elf.h
  80 #                       This helps to keep OS specific stuff out of the CPU
  81 #                       defining header ${cpu_type}/${cpu_type.h}.
  82 #
  83 #                       It is possible to include automatically-generated
  84 #                       build-directory files by prefixing them with "./".
  85 #                       All other files should relative to $srcdir/config.
  86 #
  87 #  tm_p_file            Location of file with declarations for functions
  88 #                       in $out_file.
  89 #
  90 #  out_file             The name of the machine description C support
  91 #                       file, if different from "$cpu_type/$cpu_type.c".
  92 #
  93 #  common_out_file      The name of the source file for code shared between
  94 #                       the compiler proper and the driver.
  95 #
  96 #  md_file              The name of the machine-description file, if
  97 #                       different from "$cpu_type/$cpu_type.md".
  98 #
  99 #  tmake_file           A list of machine-description-specific
 100 #                       makefile-fragments, if different from
 101 #                       "$cpu_type/t-$cpu_type".
 102 #
 103 #  extra_modes          The name of the file containing a list of extra
 104 #                       machine modes, if necessary and different from
 105 #                       "$cpu_type/$cpu_type-modes.def".
 106 #
 107 #  extra_objs           List of extra objects that should be linked into
 108 #                       the compiler proper (cc1, cc1obj, cc1plus)
 109 #                       depending on target.
 110 #
 111 #  extra_gcc_objs       List of extra objects that should be linked into
 112 #                       the compiler driver (gcc) depending on target.
 113 #
 114 #  extra_headers        List of used header files from the directory
 115 #                       config/${cpu_type}.
 116 #
 117 #  user_headers_inc_next_pre
 118 #                       List of header file names of internal gcc header
 119 #                       files, which should be prefixed by an include_next.
 120 #  user_headers_inc_next_post
 121 #                       List of header file names of internal gcc header
 122 #                       files, which should be postfixed by an include_next.
 123 #  use_gcc_tgmath       If set, add tgmath.h to the list of used header
 124 #                       files.
 125 #
 126 #  use_gcc_stdint       If "wrap", install a version of stdint.h that
 127 #                       wraps the system's copy for hosted compilations;
 128 #                       if "provide", provide a version of systems without
 129 #                       such a system header; otherwise "none", do not
 130 #                       provide such a header at all.
 131 #
 132 #  extra_passes         List of extra executables compiled for this target
 133 #                       machine, used for compiling from source to object.
 134 #
 135 #  extra_programs       Like extra_passes, but these are used when linking.
 136 #
 137 #  extra_options        List of target-dependent .opt files.
 138 #
 139 #  c_target_objs        List of extra target-dependent objects that be
 140 #                       linked into the C compiler only.
 141 #
 142 #  cxx_target_objs      List of extra target-dependent objects that be
 143 #                       linked into the C++ compiler only.
 144 #
 145 #  fortran_target_objs  List of extra target-dependent objects that be
 146 #                       linked into the fortran compiler only.
 147 #
 148 #  target_gtfiles       List of extra source files with type information.
 149 #
 150 #  xm_defines           List of macros to define when compiling for the
 151 #                       target machine.
 152 #
 153 #  xm_file              List of files to include when compiling for the
 154 #                       target machine.
 155 #
 156 #  use_collect2         Set to yes or no, depending on whether collect2
 157 #                       will be used.
 158 #
 159 #  target_cpu_default   Set to override the default target model.
 160 #
 161 #  gdb_needs_out_file_path
 162 #                       Set to yes if gdb needs a dir command with
 163 #                       `dirname $out_file`.
 164 #
 165 #  thread_file          Set to control which thread package to use.
 166 #
 167 #  gas                  Set to yes or no depending on whether the target
 168 #                       system normally uses GNU as.
 169 #
 170 #  need_64bit_hwint     Set to yes if HOST_WIDE_INT must be 64 bits wide
 171 #                       for this target.  This is true if this target
 172 #                       supports "long" or "wchar_t" wider than 32 bits,
 173 #                       or BITS_PER_WORD is wider than 32 bits.
 174 #                       The setting made here must match the one made in
 175 #                       other locations such as libcpp/configure.ac
 176 #
 177 #  configure_default_options
 178 #                       Set to an initializer for configure_default_options
 179 #                       in configargs.h, based on --with-cpu et cetera.
 180 #
 181 #  native_system_header_dir
 182 #                       Where system header files are found for this
 183 #                       target.  This defaults to /usr/include.  If
 184 #                       the --with-sysroot configure option or the
 185 #                       --sysroot command line option is used this
 186 #                       will be relative to the sysroot.
 187 # target_type_format_char
 188 #                       The default character to be used for formatting
 189 #                       the attribute in a
 190 #                       .type symbol_name, ${t_t_f_c}<property>
 191 #                       directive.
 192
 193 # The following variables are used in each case-construct to build up the
 194 # outgoing variables:
 195 #
 196 #  gnu_ld               Set to yes or no depending on whether the target
 197 #                       system normally uses GNU ld.
 198 #
 199 #  target_has_targetcm  Set to yes or no depending on whether the target
 200 #                       has its own definition of targetcm.
 201 #
 202 #  target_has_targetm_common    Set to yes or no depending on whether the
 203 #                       target has its own definition of targetm_common.
 204
 205 out_file=
 206 common_out_file=
 207 tmake_file=
 208 extra_headers=
 209 user_headers_inc_next_pre=
 210 user_headers_inc_next_post=
 211 use_gcc_tgmath=yes
 212 use_gcc_stdint=none
 213 extra_passes=
 214 extra_programs=
 215 extra_objs=
 216 extra_gcc_objs=
 217 extra_options=
 218 c_target_objs=
 219 cxx_target_objs=
 220 fortran_target_objs=
 221 target_has_targetcm=no
 222 target_has_targetm_common=yes
 223 tm_defines=
 224 xm_defines=
 225 # Set this to force installation and use of collect2.
 226 use_collect2=
 227 # Set this to override the default target model.
 228 target_cpu_default=
 229 # Set this if gdb needs a dir command with `dirname $out_file`
 230 gdb_needs_out_file_path=
 231 # Set this to control which thread package will be used.
 232 thread_file=
 233 # Reinitialize these from the flag values every loop pass, since some
 234 # configure entries modify them.
 235 gas="$gas_flag"
 236 gnu_ld="$gnu_ld_flag"
 237 default_use_cxa_atexit=no
 238 default_gnu_indirect_function=no
 239 target_gtfiles=
 240 need_64bit_hwint=
 241 need_64bit_isa=
 242 native_system_header_dir=/usr/include
 243 target_type_format_char='@'
 244
 245 # Don't carry these over build->host->target.  Please.
 246 xm_file=
 247 md_file=
 248
 249 # Obsolete configurations.
 250 case ${target} in
 251  # Avoid special cases that are not obsolete
 252    arm*-*-*eabi*                        \
 253  )
 254      ;;
 255    alpha*-dec-osf5.1*                   \
 256  | arm*-*-ecos-elf                      \
 257  | arm*-*-elf                           \
 258  | arm*-*-freebsd*                      \
 259  | arm*-*-linux*                        \
 260  | arm*-*-rtemself*                     \
 261  | arm*-*-uclinux*                      \
 262  | arm*-wince-pe*                       \
 263  | mips-sgi-irix6.5                     \
 264  | mips*-*-openbsd*                     \
 265  | picochip-*                           \
 266  | score-*                              \
 267  | *-*-solaris2.8*                      \
 268  )
 269     if test "x$enable_obsolete" != xyes; then
 270       echo "*** Configuration ${target} is obsolete." >&2
 271       echo "*** Specify --enable-obsolete to build it anyway." >&2
 272       echo "*** Support will be REMOVED in the next major release of GCC," >&2
 273       echo "*** unless a maintainer comes forward." >&2
 274       exit 1
 275     fi;;
 276 esac
 277
 278 # Unsupported targets list.  Do not put an entry in this list unless
 279 # it would otherwise be caught by a more permissive pattern.  The list
 280 # should be in alphabetical order.
 281 case ${target} in
 282    i[34567]86-go32-*                    \
 283  | i[34567]86-*-go32*                   \
 284  | m68k-*-uclinuxoldabi*                \
 285  | mips64orion*-*-rtems*                \
 286  | pdp11-*-bsd                          \
 287  | sparc-hal-solaris2*                  \
 288  | thumb-*-*                            \
 289  | *-*-freebsd[12] | *-*-freebsd[12].*  \
 290  | *-*-freebsd*aout*                    \
 291  | *-*-linux*aout*                      \
 292  | *-*-linux*coff*                      \
 293  | *-*-linux*libc1*                     \
 294  | *-*-linux*oldld*                     \
 295  | *-*-rtemsaout*                       \
 296  | *-*-rtemscoff*                       \
 297  | *-*-solaris2                         \
 298  | *-*-solaris2.[0-7]                   \
 299  | *-*-solaris2.[0-7].*                 \
 300  | *-*-sysv*            \
 301  | vax-*-vms*                           \
 302  )
 303         echo "*** Configuration ${target} not supported" 1>&2
 304         exit 1
 305         ;;
 306 esac
 307
 308 # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
 309 # updated in each machine entry.  Also set default extra_headers for some
 310 # machines.
 311 tm_p_file=
 312 cpu_type=`echo ${target} | sed 's/-.*$//'`
 313 cpu_is_64bit=
 314 case ${target} in
 315 m32c*-*-*)
 316         cpu_type=m32c
 317         tmake_file=m32c/t-m32c
 318         target_has_targetm_common=no
 319         ;;
 320 alpha*-*-*)
 321         cpu_type=alpha
 322         need_64bit_hwint=yes
 323         extra_options="${extra_options} g.opt"
 324         ;;
 325 am33_2.0-*-linux*)
 326         cpu_type=mn10300
 327         ;;
 328 arm*-*-*)
 329         cpu_type=arm
 330         extra_headers="mmintrin.h arm_neon.h"
 331         target_type_format_char='%'
 332         c_target_objs="arm-c.o"
 333         cxx_target_objs="arm-c.o"
 334         extra_options="${extra_options} arm/arm-tables.opt"
 335         ;;
 336 avr-*-*)
 337         cpu_type=avr
 338         c_target_objs="avr-c.o"
 339         cxx_target_objs="avr-c.o"
 340         extra_options="${extra_options} avr/avr-tables.opt"
 341         ;;
 342 bfin*-*)
 343         cpu_type=bfin
 344         ;;
 345 crisv32-*)
 346         cpu_type=cris
 347         ;;
 348 frv*)   cpu_type=frv
 349         extra_options="${extra_options} g.opt"
 350         ;;
 351 moxie*) cpu_type=moxie
 352         target_has_targetm_common=no
 353         ;;
 354 fido-*-*)
 355         cpu_type=m68k
 356         extra_headers=math-68881.h
 357         extra_options="${extra_options} m68k/m68k-tables.opt"
 358         ;;
 359 i[34567]86-*-*)
 360         cpu_type=i386
 361         c_target_objs="i386-c.o"
 362         cxx_target_objs="i386-c.o"
 363         need_64bit_hwint=yes
 364         extra_options="${extra_options} fused-madd.opt"
 365         extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
 366                        pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
 367                        nmmintrin.h bmmintrin.h fma4intrin.h wmmintrin.h
 368                        immintrin.h x86intrin.h avxintrin.h xopintrin.h
 369                        ia32intrin.h cross-stdarg.h lwpintrin.h popcntintrin.h
 370                        lzcntintrin.h bmiintrin.h bmi2intrin.h tbmintrin.h
 371                        avx2intrin.h fmaintrin.h f16cintrin.h"
 372         ;;
 373 x86_64-*-*)
 374         cpu_type=i386
 375         c_target_objs="i386-c.o"
 376         cxx_target_objs="i386-c.o"
 377         extra_options="${extra_options} fused-madd.opt"
 378         extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
 379                        pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
 380                        nmmintrin.h bmmintrin.h fma4intrin.h wmmintrin.h
 381                        immintrin.h x86intrin.h avxintrin.h xopintrin.h
 382                        ia32intrin.h cross-stdarg.h lwpintrin.h popcntintrin.h
 383                        lzcntintrin.h bmiintrin.h tbmintrin.h bmi2intrin.h
 384                        avx2intrin.h fmaintrin.h f16cintrin.h"
 385         need_64bit_hwint=yes
 386         ;;
 387 ia64-*-*)
 388         extra_headers=ia64intrin.h
 389         need_64bit_hwint=yes
 390         extra_options="${extra_options} g.opt fused-madd.opt"
 391         ;;
 392 hppa*-*-*)
 393         cpu_type=pa
 394         ;;
 395 lm32*)
 396         extra_options="${extra_options} g.opt"
 397         ;;
 398 m32r*-*-*)
 399         cpu_type=m32r
 400         extra_options="${extra_options} g.opt"
 401         ;;
 402 m68k-*-*)
 403         extra_headers=math-68881.h
 404         extra_options="${extra_options} m68k/m68k-tables.opt"
 405         ;;
 406 microblaze*-*-*)
 407         cpu_type=microblaze
 408         extra_options="${extra_options} g.opt"
 409         ;;
 410 mips*-*-*)
 411         cpu_type=mips
 412         need_64bit_hwint=yes
 413         extra_headers="loongson.h"
 414         extra_options="${extra_options} g.opt mips/mips-tables.opt"
 415         ;;
 416 picochip-*-*)
 417         cpu_type=picochip
 418         ;;
 419 powerpc*-*-*)
 420         cpu_type=rs6000
 421         extra_headers="ppc-asm.h altivec.h spe.h ppu_intrinsics.h paired.h spu2vmx.h vec_types.h si2vmx.h"
 422         need_64bit_hwint=yes
 423         case x$with_cpu in
 424             xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[34567]|xpower6x|xrs64a|xcell|xa2|xe500mc64)
 425                 cpu_is_64bit=yes
 426                 ;;
 427         esac
 428         extra_options="${extra_options} g.opt fused-madd.opt rs6000/rs6000-tables.opt"
 429         ;;
 430 rs6000*-*-*)
 431         need_64bit_hwint=yes
 432         extra_options="${extra_options} g.opt fused-madd.opt rs6000/rs6000-tables.opt"
 433         ;;
 434 score*-*-*)
 435         cpu_type=score
 436         extra_options="${extra_options} g.opt"
 437         ;;
 438 sparc*-*-*)
 439         cpu_type=sparc
 440         c_target_objs="sparc-c.o"
 441         cxx_target_objs="sparc-c.o"
 442         extra_headers="visintrin.h"
 443         need_64bit_hwint=yes
 444         ;;
 445 spu*-*-*)
 446         cpu_type=spu
 447         need_64bit_hwint=yes
 448         ;;
 449 s390*-*-*)
 450         cpu_type=s390
 451         need_64bit_hwint=yes
 452         extra_options="${extra_options} fused-madd.opt"
 453         ;;
 454 # Note the 'l'; we need to be able to match e.g. "shle" or "shl".
 455 sh[123456789lbe]*-*-* | sh-*-*)
 456         cpu_type=sh
 457         need_64bit_hwint=yes
 458         ;;
 459 v850*-*-*)
 460         cpu_type=v850
 461         ;;
 462 tic6x-*-*)
 463         cpu_type=c6x
 464         extra_headers="c6x_intrinsics.h"
 465         extra_options="${extra_options} c6x/c6x-tables.opt"
 466         ;;
 467 xtensa*-*-*)
 468         extra_options="${extra_options} fused-madd.opt"
 469         ;;
 470 tilegx*-*-*)
 471         cpu_type=tilegx
 472         need_64bit_hwint=yes
 473         ;;
 474 tilepro-*-*)
 475         cpu_type=tilepro
 476         need_64bit_hwint=yes
 477         ;;
 478 esac
 479
 480 tm_file=${cpu_type}/${cpu_type}.h
 481 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
 482 then
 483         tm_p_file=${cpu_type}/${cpu_type}-protos.h
 484 fi
 485 extra_modes=
 486 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
 487 then
 488         extra_modes=${cpu_type}/${cpu_type}-modes.def
 489 fi
 490 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt
 491 then
 492         extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt"
 493 fi
 494
 495 case ${target} in
 496 i[34567]86-*-*)
 497         if test "x$enable_cld" = xyes; then
 498                 tm_defines="${tm_defines} USE_IX86_CLD=1"
 499         fi
 500         if test "x$enable_frame_pointer" = xyes; then
 501                 tm_defines="${tm_defines} USE_IX86_FRAME_POINTER=1"
 502         fi
 503         tm_file="vxworks-dummy.h ${tm_file}"
 504         ;;
 505 x86_64-*-*)
 506         tm_file="i386/biarch64.h ${tm_file}"
 507         if test "x$enable_cld" = xyes; then
 508                 tm_defines="${tm_defines} USE_IX86_CLD=1"
 509         fi
 510         if test "x$enable_frame_pointer" = xyes; then
 511                 tm_defines="${tm_defines} USE_IX86_FRAME_POINTER=1"
 512         fi
 513         tm_file="vxworks-dummy.h ${tm_file}"
 514         ;;
 515 esac
 516
 517 # On a.out targets, we need to use collect2.
 518 case ${target} in
 519 *-*-*aout*)
 520         use_collect2=yes
 521         ;;
 522 esac
 523
 524 # Common C libraries.
 525 tm_defines="$tm_defines LIBC_GLIBC=1 LIBC_UCLIBC=2 LIBC_BIONIC=3"
 526
 527 # Common parts for widely ported systems.
 528 case ${target} in
 529 *-*-darwin*)
 530   tmake_file="t-darwin ${cpu_type}/t-darwin"
 531   tm_file="${tm_file} darwin.h"
 532   case ${target} in
 533   *-*-darwin9*)
 534     tm_file="${tm_file} darwin9.h"
 535     ;;
 536   *-*-darwin[12][0-9]*)
 537     tm_file="${tm_file} darwin9.h darwin10.h"
 538     ;;
 539   esac
 540   tm_file="${tm_file} ${cpu_type}/darwin.h"
 541   tm_p_file="${tm_p_file} darwin-protos.h"
 542   target_gtfiles="\$(srcdir)/config/darwin.c"
 543   extra_options="${extra_options} darwin.opt"
 544   c_target_objs="${c_target_objs} darwin-c.o"
 545   cxx_target_objs="${cxx_target_objs} darwin-c.o"
 546   fortran_target_objs="darwin-f.o"
 547   target_has_targetcm=yes
 548   extra_objs="darwin.o"
 549   extra_gcc_objs="darwin-driver.o"
 550   default_use_cxa_atexit=yes
 551   use_gcc_stdint=wrap
 552   case ${enable_threads} in
 553     "" | yes | posix) thread_file='posix' ;;
 554   esac
 555   ;;
 556 *-*-freebsd*)
 557   # This is the generic ELF configuration of FreeBSD.  Later
 558   # machine-specific sections may refine and add to this
 559   # configuration.
 560   #
 561   # Due to tm_file entry ordering issues that vary between cpu
 562   # architectures, we only define fbsd_tm_file to allow the
 563   # machine-specific section to dictate the final order of all
 564   # entries of tm_file with the minor exception that components
 565   # of the tm_file set here will always be of the form:
 566   #
 567   # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
 568   #
 569   # The machine-specific section should not tamper with this
 570   # ordering but may order all other entries of tm_file as it
 571   # pleases around the provided core setting.
 572   gas=yes
 573   gnu_ld=yes
 574   fbsd_major=`echo ${target} | sed -e 's/.*freebsd//g' | sed -e 's/\..*//g'`
 575   tm_defines="${tm_defines} FBSD_MAJOR=${fbsd_major}"
 576   tmake_file="t-slibgcc"
 577   case ${enable_threads} in
 578     no)
 579       fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
 580       ;;
 581     "" | yes | posix)
 582       thread_file='posix'
 583       ;;
 584     *)
 585       echo 'Unknown thread configuration for FreeBSD'
 586       exit 1
 587       ;;
 588   esac
 589   fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h freebsd-stdint.h"
 590   extra_options="$extra_options rpath.opt freebsd.opt"
 591   case ${target} in
 592     *-*-freebsd[345].*)
 593       :;;
 594     *)
 595       default_use_cxa_atexit=yes;;
 596   esac
 597   # need_64bit_hwint=yes # system compiler has this for all arch!
 598   use_gcc_stdint=wrap
 599   ;;
 600 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu | *-*-gnu* | *-*-kopensolaris*-gnu)
 601   extra_options="$extra_options gnu-user.opt"
 602   gas=yes
 603   gnu_ld=yes
 604   case ${enable_threads} in
 605     "" | yes | posix) thread_file='posix' ;;
 606   esac
 607   tmake_file="t-slibgcc"
 608   case $target in
 609     *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu | *-*-kopensolaris*-gnu)
 610       :;;
 611     *-*-gnu*)
 612       native_system_header_dir=/include
 613       ;;
 614   esac
 615   # glibc / uclibc / bionic switch.
 616   # uclibc and bionic aren't usable for GNU/Hurd and neither for GNU/k*BSD.
 617   case $target in
 618     *linux*)
 619       extra_options="$extra_options linux.opt";;
 620   esac
 621   case $target in
 622     *-*-*android*)
 623       tm_defines="$tm_defines DEFAULT_LIBC=LIBC_BIONIC"
 624       ;;
 625     *-*-*uclibc*)
 626       tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC"
 627       ;;
 628     *)
 629       tm_defines="$tm_defines DEFAULT_LIBC=LIBC_GLIBC"
 630       ;;
 631   esac
 632   # Assume that glibc or uClibc or Bionic are being used and so __cxa_atexit
 633   # is provided.
 634   default_use_cxa_atexit=yes
 635   use_gcc_tgmath=no
 636   use_gcc_stdint=wrap
 637   # Add Android userspace support to Linux targets.
 638   case $target in
 639     *linux*)
 640       tm_file="$tm_file linux-android.h"
 641       extra_options="$extra_options linux-android.opt"
 642       ;;
 643   esac
 644   # Enable compilation for Android by default for *android* targets.
 645   case $target in
 646     *-*-*android*)
 647       tm_defines="$tm_defines ANDROID_DEFAULT=1"
 648       ;;
 649     *)
 650       tm_defines="$tm_defines ANDROID_DEFAULT=0"
 651       ;;
 652   esac
 653   ;;
 654 *-*-netbsd*)
 655   tmake_file="t-slibgcc"
 656   gas=yes
 657   gnu_ld=yes
 658
 659   # NetBSD 2.0 and later get POSIX threads enabled by default.
 660   # Allow them to be explicitly enabled on any other version.
 661   case ${enable_threads} in
 662     "")
 663       case ${target} in
 664         *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
 665           thread_file='posix'
 666           tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
 667           ;;
 668       esac
 669       ;;
 670     yes | posix)
 671       thread_file='posix'
 672       tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
 673       ;;
 674   esac
 675
 676   # NetBSD 2.0 and later provide __cxa_atexit(), which we use by
 677   # default (unless overridden by --disable-__cxa_atexit).
 678   case ${target} in
 679     *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
 680       default_use_cxa_atexit=yes
 681       ;;
 682   esac
 683   ;;
 684 *-*-openbsd*)
 685   tmake_file="t-openbsd"
 686   case ${enable_threads} in
 687     yes)
 688       thread_file='posix'
 689       ;;
 690   esac
 691   case ${target} in
 692     *-*-openbsd2.*|*-*-openbsd3.[012])
 693       tm_defines="${tm_defines} HAS_LIBC_R=1" ;;
 694   esac
 695   case ${target} in
 696     *-*-openbsd4.[3-9]|*-*-openbsd[5-9]*)
 697       default_use_cxa_atexit=yes
 698       ;;
 699   esac
 700   ;;
 701 *-*-rtems*)
 702   case ${enable_threads} in
 703     yes) thread_file='rtems' ;;
 704   esac
 705   extra_options="${extra_options} rtems.opt"
 706   use_gcc_stdint=wrap
 707   ;;
 708 *-*-uclinux*)
 709   extra_options="$extra_options gnu-user.opt"
 710   use_gcc_stdint=wrap
 711   tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC SINGLE_LIBC"
 712   ;;
 713 *-*-solaris2*)
 714   # i?86-*-solaris2* needs to insert headers between cpu default and
 715   # Solaris 2 specific ones.
 716   sol2_tm_file="dbxelf.h elfos.h ${cpu_type}/sysv4.h sol2.h ${cpu_type}/sol2.h"
 717   case ${target} in
 718     *-*-solaris2.1[0-9]*)
 719       sol2_tm_file="${sol2_tm_file} sol2-10.h"
 720       use_gcc_stdint=wrap
 721       ;;
 722     *)
 723       use_gcc_stdint=provide
 724       ;;
 725   esac
 726   if test x$gnu_ld = xyes; then
 727     tm_file="usegld.h ${tm_file}"
 728   fi
 729   if test x$gas = xyes; then
 730     tm_file="usegas.h ${tm_file}"
 731   fi
 732   tm_p_file="${tm_p_file} sol2-protos.h"
 733   tmake_file="${tmake_file} t-sol2 t-slibgcc"
 734   c_target_objs="${c_target_objs} sol2-c.o"
 735   cxx_target_objs="${cxx_target_objs} sol2-c.o sol2-cxx.o"
 736   extra_objs="sol2.o sol2-stubs.o"
 737   extra_options="${extra_options} sol2.opt"
 738   case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
 739     "":yes:* | yes:yes:* )
 740       thread_file=posix
 741       ;;
 742   esac
 743   ;;
 744 *-*-*vms*)
 745   extra_options="${extra_options} vms/vms.opt"
 746   xmake_file=vms/x-vms
 747   tmake_file="vms/t-vms t-slibgcc"
 748   extra_objs="vms.o"
 749   target_gtfiles="$target_gtfiles \$(srcdir)/config/vms/vms.c"
 750   tm_p_file="${tm_p_file} vms/vms-protos.h"
 751   c_target_objs="vms-c.o"
 752   cxx_target_objs="vms-c.o"
 753   if test x$gnu_ld != xyes; then
 754     # Build wrappers for native case.
 755     extra_programs="ld\$(exeext) ar\$(exeext)"
 756     tmake_file="$tmake_file vms/t-vmsnative"
 757   fi
 758   ;;
 759 *-*-vxworks*)
 760   tmake_file=t-vxworks
 761   xm_defines=POSIX
 762   extra_options="${extra_options} vxworks.opt"
 763   extra_objs=vxworks.o
 764   case ${enable_threads} in
 765     no) ;;
 766     "" | yes | vxworks) thread_file='vxworks' ;;
 767     *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
 768   esac
 769   ;;
 770 *-*-elf)
 771   # Assume that newlib is being used and so __cxa_atexit is provided.
 772   default_use_cxa_atexit=yes
 773   use_gcc_stdint=wrap
 774   ;;
 775 esac
 776
 777 case ${target} in
 778 alpha*-*-linux*)
 779         tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h glibc-stdint.h"
 780         tmake_file="${tmake_file} alpha/t-linux"
 781         extra_options="${extra_options} alpha/elf.opt"
 782         target_cpu_default="MASK_GAS"
 783         ;;
 784 alpha*-*-freebsd*)
 785         tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
 786         extra_options="${extra_options} alpha/elf.opt"
 787         target_cpu_default="MASK_GAS"
 788         ;;
 789 alpha*-*-netbsd*)
 790         tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
 791         extra_options="${extra_options} netbsd.opt netbsd-elf.opt \
 792                        alpha/elf.opt"
 793         target_cpu_default="MASK_GAS"
 794         ;;
 795 alpha*-*-openbsd*)
 796         tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
 797         tm_file="alpha/alpha.h alpha/elf.h openbsd.h openbsd-stdint.h alpha/openbsd.h openbsd-libpthread.h"
 798         extra_options="${extra_options} openbsd.opt alpha/elf.opt"
 799         # default x-alpha is only appropriate for dec-osf.
 800         target_cpu_default="MASK_GAS"
 801         ;;
 802 alpha*-dec-osf5.1*)
 803         if test x$stabs = xyes
 804         then
 805                 tm_file="${tm_file} dbx.h"
 806         fi
 807         # mips-tfile and mips-tdump are only used with the native assembler
 808         # and require the Tru64 UNIX <a.out.h>, so only build native.
 809         if test x$gas != xyes && test x${host} = x${target}
 810         then
 811                 extra_passes="mips-tfile mips-tdump"
 812         fi
 813         use_collect2=yes
 814         tmake_file="t-slibgcc"
 815         tm_file="${tm_file} alpha/osf5.h"
 816         tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
 817         extra_options="${extra_options} rpath.opt alpha/osf5.opt"
 818         extra_headers=va_list.h
 819         use_gcc_stdint=provide
 820         case ${enable_threads} in
 821           "" | yes | posix)
 822             thread_file='posix'
 823             ;;
 824         esac
 825         ;;
 826 alpha64-dec-*vms*)
 827         tm_file="${tm_file} vms/vms.h vms/vms64.h alpha/vms.h"
 828         xm_file="alpha/xm-vms.h vms/xm-vms64.h"
 829         tmake_file="${tmake_file} vms/t-vms64 alpha/t-vms"
 830         ;;
 831 alpha*-dec-*vms*)
 832         tm_file="${tm_file} vms/vms.h alpha/vms.h"
 833         xm_file="alpha/xm-vms.h"
 834         tmake_file="${tmake_file} alpha/t-vms"
 835         ;;
 836 arm-wrs-vxworks)
 837         tm_file="elfos.h arm/elf.h arm/aout.h ${tm_file} vx-common.h vxworks.h arm/vxworks.h"
 838         extra_options="${extra_options} arm/vxworks.opt"
 839         tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
 840         ;;
 841 arm*-*-freebsd*)
 842         tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
 843         tmake_file="${tmake_file} arm/t-arm arm/t-strongarm-elf"
 844         ;;
 845 arm*-*-netbsdelf*)
 846         tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
 847         extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
 848         tmake_file="${tmake_file} arm/t-arm"
 849         ;;
 850 arm*-*-linux*)                  # ARM GNU/Linux with ELF
 851         tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
 852         case $target in
 853         arm*b-*-linux*)
 854                 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
 855                 ;;
 856         esac
 857         tmake_file="${tmake_file} arm/t-arm"
 858         case ${target} in
 859         arm*-*-linux-*eabi*)
 860             tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h"
 861             tmake_file="$tmake_file arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi"
 862             # Define multilib configuration for arm-linux-androideabi.
 863             case ${target} in
 864             *-androideabi)
 865                 tmake_file="$tmake_file arm/t-linux-androideabi"
 866                 ;;
 867             esac
 868             # The BPABI long long divmod functions return a 128-bit value in
 869             # registers r0-r3.  Correctly modeling that requires the use of
 870             # TImode.
 871             need_64bit_hwint=yes
 872             # The EABI requires the use of __cxa_atexit.
 873             default_use_cxa_atexit=yes
 874             ;;
 875         *)
 876             tmake_file="$tmake_file arm/t-linux"
 877             ;;
 878         esac
 879         with_tls=${with_tls:-gnu}
 880         tm_file="$tm_file arm/aout.h arm/arm.h"
 881         ;;
 882 arm*-*-uclinux*)                # ARM ucLinux
 883         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h glibc-stdint.h"
 884         tmake_file="arm/t-arm arm/t-arm-elf"
 885         case ${target} in
 886         arm*-*-uclinux*eabi*)
 887             tm_file="$tm_file arm/bpabi.h arm/uclinux-eabi.h"
 888             tmake_file="$tmake_file arm/t-bpabi"
 889             # The BPABI long long divmod functions return a 128-bit value in
 890             # registers r0-r3.  Correctly modeling that requires the use of
 891             # TImode.
 892             need_64bit_hwint=yes
 893             # The EABI requires the use of __cxa_atexit.
 894             default_use_cxa_atexit=yes
 895         esac
 896         tm_file="$tm_file arm/aout.h arm/arm.h"
 897         ;;
 898 arm*-*-ecos-elf)
 899         tm_file="dbxelf.h elfos.h newlib-stdint.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
 900         tmake_file="arm/t-arm arm/t-arm-elf"
 901         ;;
 902 arm*-*-rtemself*)
 903         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h newlib-stdint.h"
 904         tmake_file="arm/t-arm arm/t-arm-elf t-rtems arm/t-rtems"
 905         ;;
 906 arm*-*-eabi* | arm*-*-symbianelf* | arm*-*-rtems*)
 907         # The BPABI long long divmod functions return a 128-bit value in
 908         # registers r0-r3.  Correctly modeling that requires the use of
 909         # TImode.
 910         need_64bit_hwint=yes
 911         default_use_cxa_atexit=yes
 912         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
 913         tmake_file="arm/t-arm arm/t-arm-elf"
 914         case ${target} in
 915         arm*-*-eabi*)
 916           tm_file="$tm_file newlib-stdint.h"
 917           tmake_file="${tmake_file} arm/t-bpabi"
 918           use_gcc_stdint=wrap
 919           ;;
 920         arm*-*-rtems*)
 921           tm_file="${tm_file} rtems.h arm/rtems-eabi.h newlib-stdint.h"
 922           tmake_file="${tmake_file} arm/t-bpabi t-rtems arm/t-rtems-eabi"
 923           ;;
 924         arm*-*-symbianelf*)
 925           tm_file="${tm_file} arm/symbian.h"
 926           # We do not include t-bpabi for Symbian OS because the system
 927           # provides its own implementation of the BPABI functions.
 928           tmake_file="${tmake_file} arm/t-symbian"
 929           ;;
 930         esac
 931         tm_file="${tm_file} arm/aout.h arm/arm.h"
 932         ;;
 933 arm*-*-elf)
 934         tm_file="dbxelf.h elfos.h newlib-stdint.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
 935         tmake_file="arm/t-arm arm/t-arm-elf"
 936         ;;
 937 arm*-wince-pe*)
 938         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h"
 939         tmake_file="arm/t-arm arm/t-wince-pe"
 940         extra_options="${extra_options} arm/pe.opt"
 941         extra_objs="pe.o"
 942         ;;
 943 avr-*-rtems*)
 944         tm_file="elfos.h avr/elf.h avr/avr.h dbxelf.h avr/rtems.h rtems.h newlib-stdint.h"
 945         tmake_file="avr/t-avr avr/t-multilib t-rtems avr/t-rtems"
 946         extra_gcc_objs="driver-avr.o avr-devices.o"
 947         extra_objs="avr-devices.o avr-log.o"
 948         ;;
 949 avr-*-*)
 950         tm_file="elfos.h avr/elf.h avr/avr.h dbxelf.h avr/avr-stdint.h"
 951         if test x${with_avrlibc} = xyes; then
 952             tm_file="${tm_file} ${cpu_type}/avrlibc.h"
 953             tm_defines="${tm_defines} WITH_AVRLIBC"
 954         fi
 955         tmake_file="avr/t-avr avr/t-multilib"
 956         use_gcc_stdint=wrap
 957         extra_gcc_objs="driver-avr.o avr-devices.o"
 958         extra_objs="avr-devices.o avr-log.o"
 959         ;;
 960 bfin*-elf*)
 961         tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
 962         tmake_file=bfin/t-bfin-elf
 963         use_collect2=no
 964         ;;
 965 bfin*-uclinux*)
 966         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/uclinux.h"
 967         tmake_file=bfin/t-bfin-uclinux
 968         use_collect2=no
 969         ;;
 970 bfin*-linux-uclibc*)
 971         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/linux.h ./linux-sysroot-suffix.h"
 972         tmake_file="bfin/t-bfin-linux t-slibgcc"
 973         use_collect2=no
 974         ;;
 975 bfin*-rtems*)
 976         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h newlib-stdint.h"
 977         tmake_file="t-rtems bfin/t-rtems"
 978         ;;
 979 bfin*-*)
 980         tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
 981         use_collect2=no
 982         use_gcc_stdint=wrap
 983         ;;
 984 cr16-*-elf)
 985         tm_file="elfos.h ${tm_file}"
 986         tmake_file="${tmake_file} cr16/t-cr16 "
 987         use_collect2=no
 988         ;;
 989 crisv32-*-elf | crisv32-*-none)
 990         tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
 991         tmake_file="cris/t-cris"
 992         target_cpu_default=32
 993         gas=yes
 994         extra_options="${extra_options} cris/elf.opt"
 995         use_gcc_stdint=wrap
 996         ;;
 997 cris-*-elf | cris-*-none)
 998         tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
 999         tmake_file="cris/t-cris cris/t-elfmulti"
1000         gas=yes
1001         extra_options="${extra_options} cris/elf.opt"
1002         use_gcc_stdint=wrap
1003         ;;
1004 crisv32-*-linux* | cris-*-linux*)
1005         tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h cris/linux.h"
1006         # We need to avoid using t-linux, so override default tmake_file
1007         tmake_file="cris/t-cris cris/t-linux t-slibgcc"
1008         extra_options="${extra_options} cris/linux.opt"
1009         case $target in
1010           cris-*-*)
1011                 target_cpu_default=10
1012                 ;;
1013           crisv32-*-*)
1014                 target_cpu_default=32
1015                 ;;
1016         esac
1017         ;;
1018 epiphany-*-elf )
1019         tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
1020         tmake_file="epiphany/t-epiphany"
1021         extra_options="${extra_options} fused-madd.opt"
1022         extra_objs="$extra_objs mode-switch-use.o resolve-sw-modes.o"
1023         tm_defines="${tm_defines} EPIPHANY_STACK_OFFSET=${with_stack_offset:-8}"
1024         extra_headers="epiphany_intrinsics.h"
1025         ;;
1026 fr30-*-elf)
1027         tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
1028         ;;
1029 frv-*-elf)
1030         tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
1031         tmake_file=frv/t-frv
1032         ;;
1033 frv-*-*linux*)
1034         tm_file="dbxelf.h elfos.h ${tm_file} \
1035                  gnu-user.h linux.h glibc-stdint.h frv/linux.h"
1036         tmake_file="${tmake_file} frv/t-frv frv/t-linux"
1037         ;;
1038 moxie-*-elf)
1039         gas=yes
1040         gnu_ld=yes
1041         tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
1042         tmake_file="${tmake_file} moxie/t-moxie"
1043         ;;
1044 moxie-*-uclinux*)
1045         gas=yes
1046         gnu_ld=yes
1047         tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h moxie/uclinux.h"
1048         tmake_file="${tmake_file} moxie/t-moxie"
1049         ;;
1050 moxie-*-rtems*)
1051         tmake_file="${tmake_file} moxie/t-moxie t-rtems"
1052         tm_file="moxie/moxie.h dbxelf.h elfos.h moxie/rtems.h rtems.h newlib-stdint.h"
1053         ;;
1054 h8300-*-rtems*)
1055         tmake_file="h8300/t-h8300 t-rtems h8300/t-rtems"
1056         tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h newlib-stdint.h"
1057         ;;
1058 h8300-*-elf*)
1059         tmake_file="h8300/t-h8300"
1060         tm_file="h8300/h8300.h dbxelf.h elfos.h newlib-stdint.h h8300/elf.h"
1061         ;;
1062 hppa*64*-*-linux*)
1063         target_cpu_default="MASK_PA_11|MASK_PA_20"
1064         tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h gnu-user.h linux.h \
1065                  glibc-stdint.h pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h \
1066                  pa/pa64-linux.h"
1067         gas=yes gnu_ld=yes
1068         need_64bit_hwint=yes
1069         ;;
1070 hppa*-*-linux*)
1071         target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
1072         tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h pa/pa-linux.h \
1073                  pa/pa32-regs.h pa/pa32-linux.h"
1074         tmake_file="${tmake_file} pa/t-linux"
1075         ;;
1076 # port not yet contributed.
1077 #hppa*-*-openbsd*)
1078 #       target_cpu_default="MASK_PA_11"
1079 #       ;;
1080 hppa[12]*-*-hpux10*)
1081         case ${target} in
1082         hppa1.1-*-* | hppa2*-*-*)
1083                 target_cpu_default="MASK_PA_11"
1084                 ;;
1085         esac
1086         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
1087                  pa/pa-hpux.h pa/pa-hpux10.h"
1088         extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux10.opt"
1089         case ${target} in
1090         *-*-hpux10.[1-9]*)
1091                 tm_file="${tm_file} pa/pa-hpux1010.h"
1092                 extra_options="${extra_options} pa/pa-hpux1010.opt"
1093                 ;;
1094         esac
1095         use_gcc_stdint=provide
1096         tm_file="${tm_file} hpux-stdint.h"
1097         tmake_file="t-slibgcc"
1098         case ${enable_threads} in
1099           "")
1100             if test x$have_pthread_h = xyes ; then
1101               tmake_file="${tmake_file} pa/t-dce-thr"
1102             fi
1103             ;;
1104           yes | dce)
1105             tmake_file="${tmake_file} pa/t-dce-thr"
1106             ;;
1107         esac
1108         use_collect2=yes
1109         gas=yes
1110         if test "x$with_dwarf2" != x; then
1111                 echo "Warning: dwarf2 debug format is not supported for this target, --with-dwarf2 ignored" 1>&2
1112                 dwarf2=no
1113         fi
1114         ;;
1115 hppa*64*-*-hpux11*)
1116         target_cpu_default="MASK_PA_11|MASK_PA_20"
1117         if test x$gnu_ld = xyes
1118         then
1119                 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1120         fi
1121         tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
1122                  pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
1123                  pa/pa-hpux11.h"
1124         case ${target} in
1125         *-*-hpux11.[12]*)
1126                 tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
1127                 extra_options="${extra_options} pa/pa-hpux1111.opt"
1128                 ;;
1129         *-*-hpux11.[3-9]*)
1130                 tm_file="${tm_file} pa/pa-hpux1131.h pa/pa-64.h pa/pa64-hpux.h"
1131                 extra_options="${extra_options} pa/pa-hpux1131.opt"
1132                 ;;
1133         *)
1134                 tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
1135                 ;;
1136         esac
1137         extra_options="${extra_options} pa/pa-hpux.opt \
1138                        pa/pa-hpux1010.opt pa/pa64-hpux.opt hpux11.opt"
1139         need_64bit_hwint=yes
1140         tmake_file="t-slibgcc"
1141         case x${enable_threads} in
1142         x | xyes | xposix )
1143                 thread_file=posix
1144                 ;;
1145         esac
1146         gas=yes
1147         case ${target} in
1148           *-*-hpux11.[01]*)
1149                 use_gcc_stdint=provide
1150                 tm_file="${tm_file} hpux-stdint.h"
1151                 ;;
1152           *-*-hpux11.[23]*)
1153                 use_gcc_stdint=wrap
1154                 tm_file="${tm_file} hpux-stdint.h"
1155                 ;;
1156         esac
1157         ;;
1158 hppa[12]*-*-hpux11*)
1159         case ${target} in
1160         hppa1.1-*-* | hppa2*-*-*)
1161                 target_cpu_default="MASK_PA_11"
1162                 ;;
1163         esac
1164         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
1165                  pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h"
1166         extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt \
1167                        hpux11.opt"
1168         case ${target} in
1169         *-*-hpux11.[12]*)
1170                 tm_file="${tm_file} pa/pa-hpux1111.h"
1171                 extra_options="${extra_options} pa/pa-hpux1111.opt"
1172                 ;;
1173         *-*-hpux11.[3-9]*)
1174                 tm_file="${tm_file} pa/pa-hpux1131.h"
1175                 extra_options="${extra_options} pa/pa-hpux1131.opt"
1176                 ;;
1177         esac
1178         tmake_file="t-slibgcc"
1179         case x${enable_threads} in
1180         x | xyes | xposix )
1181                 thread_file=posix
1182                 ;;
1183         esac
1184         use_collect2=yes
1185         gas=yes
1186         case ${target} in
1187           *-*-hpux11.[01]*)
1188                 use_gcc_stdint=provide
1189                 tm_file="${tm_file} hpux-stdint.h"
1190                 ;;
1191           *-*-hpux11.[23]*)
1192                 use_gcc_stdint=wrap
1193                 tm_file="${tm_file} hpux-stdint.h"
1194                 ;;
1195         esac
1196         if test "x$with_dwarf2" != x; then
1197                 echo "Warning: dwarf2 debug format is not supported for this target, --with-dwarf2 ignored" 1>&2
1198                 dwarf2=no
1199         fi
1200         ;;
1201 i[34567]86-*-darwin*)
1202         need_64bit_isa=yes
1203         # Baseline choice for a machine that allows m64 support.
1204         with_cpu=${with_cpu:-core2}
1205         tmake_file="${tmake_file} t-slibgcc"
1206         ;;
1207 x86_64-*-darwin*)
1208         with_cpu=${with_cpu:-core2}
1209         tmake_file="${tmake_file} ${cpu_type}/t-darwin64 t-slibgcc"
1210         tm_file="${tm_file} ${cpu_type}/darwin64.h"
1211         ;;
1212 i[34567]86-*-elf*)
1213         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h"
1214         ;;
1215 x86_64-*-elf*)
1216         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h"
1217         ;;
1218 i[34567]86-*-freebsd*)
1219         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
1220         ;;
1221 x86_64-*-freebsd*)
1222         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
1223         ;;
1224 i[34567]86-*-netbsdelf*)
1225         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
1226         extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1227         ;;
1228 x86_64-*-netbsd*)
1229         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
1230         extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1231         ;;
1232 i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123])
1233         tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h"
1234         extra_options="${extra_options} openbsd.opt"
1235         # needed to unconfuse gdb
1236         tmake_file="${tmake_file} t-openbsd i386/t-openbsd"
1237         # we need collect2 until our bug is fixed...
1238         use_collect2=yes
1239         ;;
1240 i[34567]86-*-openbsd*)
1241         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
1242         tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h i386/openbsdelf.h"
1243         extra_options="${extra_options} openbsd.opt"
1244         gas=yes
1245         gnu_ld=yes
1246         ;;
1247 i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu | i[34567]86-*-gnu* | i[34567]86-*-kopensolaris*-gnu)
1248                         # Intel 80386's running GNU/*
1249                         # with ELF format using glibc 2
1250         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h glibc-stdint.h"
1251         case ${target} in
1252         i[34567]86-*-linux*)
1253                 tm_file="${tm_file} linux.h"
1254                 # Assume modern glibc
1255                 default_gnu_indirect_function=yes
1256                 if test x$enable_targets = xall; then
1257                         tm_file="${tm_file} i386/x86-64.h i386/gnu-user64.h i386/linux64.h"
1258                         tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1259                         tmake_file="${tmake_file} i386/t-linux64"
1260                         x86_multilibs="${with_multilib_list}"
1261                         if test "$x86_multilibs" = "default"; then
1262                                 x86_multilibs="m64,m32"
1263                         fi
1264                         x86_multilibs=`echo $x86_multilibs | sed -e 's/,/ /g'`
1265                         for x86_multilib in ${x86_multilibs}; do
1266                                 case ${x86_multilib} in
1267                                 m32 | m64 | mx32)
1268                                         TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${x86_multilib}"
1269                                         ;;
1270                                 *)
1271                                         echo "--with-multilib-list=${x86_with_multilib} not supported."
1272                                         exit 1
1273                                 esac
1274                         done
1275                         TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
1276                         need_64bit_isa=yes
1277                         case X"${with_cpu}" in
1278                         Xgeneric|Xatom|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver2|Xbdver1|Xbtver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
1279                                 ;;
1280                         X)
1281                                 if test x$with_cpu_64 = x; then
1282                                         with_cpu_64=generic
1283                                 fi
1284                                 ;;
1285                         *)
1286                                 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1287                                 echo "generic atom core2 corei7 corei7-avx nocona x86-64 bdver2 bdver1 btver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
1288                                 exit 1
1289                                 ;;
1290                         esac
1291                 else
1292                         tm_file="${tm_file} i386/gnu-user.h i386/linux.h"
1293                 fi
1294                 ;;
1295         i[34567]86-*-knetbsd*-gnu)
1296                 tm_file="${tm_file} i386/gnu-user.h knetbsd-gnu.h i386/knetbsd-gnu.h"
1297                 ;;
1298         i[34567]86-*-kfreebsd*-gnu)
1299                 tm_file="${tm_file} i386/gnu-user.h kfreebsd-gnu.h i386/kfreebsd-gnu.h"
1300                 ;;
1301         i[34567]86-*-kopensolaris*-gnu)
1302                 tm_file="${tm_file} i386/gnu-user.h kopensolaris-gnu.h i386/kopensolaris-gnu.h"
1303                 ;;
1304         i[34567]86-*-gnu*)
1305                 tm_file="$tm_file i386/gnu-user.h gnu.h i386/gnu.h"
1306                 ;;
1307         esac
1308         ;;
1309 x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
1310         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h glibc-stdint.h \
1311                  i386/x86-64.h i386/gnu-user64.h"
1312         case ${target} in
1313         x86_64-*-linux*)
1314                 tm_file="${tm_file} linux.h i386/linux64.h"
1315                 # Assume modern glibc
1316                 default_gnu_indirect_function=yes
1317                 ;;
1318         x86_64-*-kfreebsd*-gnu)
1319                 tm_file="${tm_file} kfreebsd-gnu.h i386/kfreebsd-gnu64.h"
1320                 ;;
1321         x86_64-*-knetbsd*-gnu)
1322                 tm_file="${tm_file} knetbsd-gnu.h"
1323                 ;;
1324         esac
1325         tmake_file="${tmake_file} i386/t-linux64"
1326         x86_multilibs="${with_multilib_list}"
1327         if test "$x86_multilibs" = "default"; then
1328                 x86_multilibs="m64,m32"
1329         fi
1330         x86_multilibs=`echo $x86_multilibs | sed -e 's/,/ /g'`
1331         for x86_multilib in ${x86_multilibs}; do
1332                 case ${x86_multilib} in
1333                 m32 | m64 | mx32)
1334                         TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${x86_multilib}"
1335                         ;;
1336                 *)
1337                         echo "--with-multilib-list=${x86_with_multilib} not supported."
1338                         exit 1
1339                 esac
1340         done
1341         TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
1342         ;;
1343 i[34567]86-pc-msdosdjgpp*)
1344         xm_file=i386/xm-djgpp.h
1345         tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h i386/djgpp-stdint.h"
1346         native_system_header_dir=/dev/env/DJDIR/include
1347         extra_options="${extra_options} i386/djgpp.opt"
1348         gnu_ld=yes
1349         gas=yes
1350         use_gcc_stdint=wrap
1351         ;;
1352 i[34567]86-*-lynxos*)
1353         xm_defines=POSIX
1354         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
1355         tmake_file="${tmake_file} t-lynx"
1356         extra_options="${extra_options} lynx.opt"
1357         thread_file=lynx
1358         gnu_ld=yes
1359         gas=yes
1360         ;;
1361 i[34567]86-*-nto-qnx*)
1362         tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h i386/unix.h i386/nto.h"
1363         extra_options="${extra_options} i386/nto.opt"
1364         gnu_ld=yes
1365         gas=yes
1366         ;;
1367 i[34567]86-*-rtems*)
1368         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h newlib-stdint.h"
1369         tmake_file="${tmake_file} i386/t-rtems t-rtems"
1370         ;;
1371 i[34567]86-*-solaris2* | x86_64-*-solaris2.1[0-9]*)
1372         tm_file="${tm_file} i386/unix.h i386/att.h ${sol2_tm_file}"
1373         # Set default arch_32 to pentium4, tune_32 to generic like the other
1374         # i386 targets, although config.guess defaults to i386-pc-solaris2*.
1375         case ${target} in
1376         *-*-solaris2.[89]*)
1377                 # Solaris 8 and 9/x86 cannot execute SSE/SSE2 instructions by
1378                 # default.
1379                 with_arch_32=${with_arch_32:-pentiumpro}
1380                 ;;
1381         *)
1382                 with_arch_32=${with_arch_32:-pentium4}
1383                 ;;
1384         esac
1385         with_tune_32=${with_tune_32:-generic}
1386         case ${target} in
1387         *-*-solaris2.1[0-9]*)
1388                 tm_file="${tm_file} i386/x86-64.h i386/sol2-bi.h sol2-bi.h"
1389                 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1390                 tmake_file="$tmake_file i386/t-sol2-64"
1391                 need_64bit_isa=yes
1392                 case X"${with_cpu}" in
1393                 Xgeneric|Xatom|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver2|Xbdver1|Xbtver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
1394                         ;;
1395                 X)
1396                         if test x$with_cpu_64 = x; then
1397                                 with_cpu_64=generic
1398                         fi
1399                         ;;
1400                 *)
1401                         echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1402                         echo "generic atom core2 corei7 corei7-avx nocona x86-64 bdver2 bdver1 btver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
1403                         exit 1
1404                         ;;
1405                 esac
1406                 ;;
1407         esac
1408         ;;
1409 i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae)
1410         tm_file="${tm_file} i386/unix.h i386/att.h elfos.h vx-common.h"
1411         case ${target} in
1412           *-vxworksae*)
1413             tm_file="${tm_file} vxworksae.h i386/vx-common.h i386/vxworksae.h"
1414             tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae"
1415             ;;
1416           *)
1417             tm_file="${tm_file} vxworks.h i386/vx-common.h i386/vxworks.h"
1418             tmake_file="${tmake_file} i386/t-vxworks"
1419             ;;
1420         esac
1421         ;;
1422 i[34567]86-*-cygwin*)
1423         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h i386/cygwin-stdint.h"
1424         xm_file=i386/xm-cygwin.h
1425         tmake_file="${tmake_file} i386/t-cygming t-slibgcc"
1426         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1427         extra_options="${extra_options} i386/cygming.opt"
1428         extra_objs="winnt.o winnt-stubs.o"
1429         c_target_objs="${c_target_objs} msformat-c.o"
1430         cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
1431         if test x$enable_threads = xyes; then
1432                 thread_file='posix'
1433         fi
1434         use_gcc_stdint=wrap
1435         ;;
1436 i[34567]86-*-mingw* | x86_64-*-mingw*)
1437         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h"
1438         xm_file=i386/xm-mingw32.h
1439         case ${target} in
1440                 x86_64-*-* | *-w64-*)
1441                         need_64bit_isa=yes
1442                         ;;
1443                 *)
1444                         ;;
1445         esac
1446         if test x$enable_threads = xposix ; then
1447                 tm_file="${tm_file} i386/mingw-pthread.h"
1448         fi
1449         tm_file="${tm_file} i386/mingw32.h"
1450         # This makes the logic if mingw's or the w64 feature set has to be used
1451         case ${target} in
1452                 *-w64-*)
1453                         user_headers_inc_next_post="${user_headers_inc_next_post} float.h"
1454                         user_headers_inc_next_pre="${user_headers_inc_next_pre} stddef.h stdarg.h"
1455                         tm_file="${tm_file} i386/mingw-w64.h"
1456                         if test x$enable_targets = xall; then
1457                                 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1458                                 case X"${with_cpu}" in
1459                                 Xgeneric|Xatom|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver2|Xbdver1|Xbtver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
1460                                         ;;
1461                                 X)
1462                                         if test x$with_cpu_64 = x; then
1463                                                 with_cpu_64=generic
1464                                         fi
1465                                         ;;
1466                                 *)
1467                                         echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1468                                         echo "generic atom core2 corei7 Xcorei7-avx nocona x86-64 bdver2 bdver1 btver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
1469                                         exit 1
1470                                         ;;
1471                                 esac
1472                         fi
1473                         ;;
1474                 *)
1475                         ;;
1476         esac
1477         tm_file="${tm_file} i386/mingw-stdint.h"
1478         tmake_file="${tmake_file} i386/t-cygming t-slibgcc"
1479         case ${target} in
1480                x86_64-w64-*)
1481                         tmake_file="${tmake_file} i386/t-mingw-w64"
1482                         ;;
1483                i[34567]86-w64-*)
1484                         tmake_file="${tmake_file} i386/t-mingw-w32"
1485                         ;;
1486         esac
1487         native_system_header_dir=/mingw/include
1488         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1489         extra_options="${extra_options} i386/cygming.opt i386/mingw.opt"
1490         case ${target} in
1491                 *-w64-*)
1492                         extra_options="${extra_options} i386/mingw-w64.opt"
1493                         ;;
1494                 *)
1495                         ;;
1496         esac
1497         extra_objs="winnt.o winnt-stubs.o"
1498         c_target_objs="${c_target_objs} msformat-c.o"
1499         cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
1500         gas=yes
1501         gnu_ld=yes
1502         default_use_cxa_atexit=yes
1503         use_gcc_stdint=wrap
1504         case ${enable_threads} in
1505           "" | yes | win32)
1506             thread_file='win32'
1507             ;;
1508           posix)
1509             thread_file='posix'
1510             ;;
1511         esac
1512         case ${target} in
1513                 *mingw32crt*)
1514                         tm_file="${tm_file} i386/crtdll.h"
1515                         ;;
1516                 *mingw32msv* | *mingw*)
1517                         ;;
1518         esac
1519         ;;
1520 i[34567]86-*-interix[3-9]*)
1521         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h"
1522         tmake_file="${tmake_file} i386/t-interix"
1523         extra_options="${extra_options} rpath.opt i386/interix.opt"
1524         extra_objs="winnt.o winnt-stubs.o"
1525         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1526         if test x$enable_threads = xyes ; then
1527                 thread_file='posix'
1528         fi
1529         if test x$stabs = xyes ; then
1530                 tm_file="${tm_file} dbxcoff.h"
1531         fi
1532         ;;
1533 ia64*-*-elf*)
1534         tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h ia64/sysv4.h ia64/elf.h"
1535         tmake_file="ia64/t-ia64"
1536         target_cpu_default="0"
1537         if test x$gas = xyes
1538         then
1539                 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1540         fi
1541         if test x$gnu_ld = xyes
1542         then
1543                 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1544         fi
1545         ;;
1546 ia64*-*-freebsd*)
1547         tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
1548         target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1549         tmake_file="${tmake_file} ia64/t-ia64"
1550         ;;
1551 ia64*-*-linux*)
1552         tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ia64/sysv4.h ia64/linux.h"
1553         tmake_file="${tmake_file} ia64/t-ia64 ia64/t-linux t-libunwind"
1554         target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1555         ;;
1556 ia64*-*-hpux*)
1557         tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/hpux.h"
1558         tmake_file="ia64/t-ia64 ia64/t-hpux t-slibgcc"
1559         target_cpu_default="MASK_GNU_AS"
1560         case x$enable_threads in
1561         x | xyes | xposix )
1562                 thread_file=posix
1563                 ;;
1564         esac
1565         use_collect2=no
1566         c_target_objs="ia64-c.o"
1567         cxx_target_objs="ia64-c.o"
1568         extra_options="${extra_options} ia64/ilp32.opt hpux11.opt"
1569         use_gcc_stdint=wrap
1570         tm_file="${tm_file} hpux-stdint.h"
1571         case ${target} in
1572         *-*-hpux11.3*)
1573                 tm_file="${tm_file} ia64/hpux-unix2003.h"
1574                 ;;
1575         esac
1576         ;;
1577 ia64-hp-*vms*)
1578         tm_file="${tm_file} elfos.h ia64/sysv4.h ia64/elf.h vms/vms.h vms/vms64.h ia64/vms.h"
1579         xm_file="vms/xm-vms.h vms/xm-vms64.h"
1580         tmake_file="${tmake_file} vms/t-vms64 ia64/t-ia64"
1581         target_cpu_default="0"
1582         if test x$gas = xyes
1583         then
1584                 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1585         fi
1586         extra_options="${extra_options} ia64/vms.opt"
1587         ;;
1588 iq2000*-*-elf*)
1589         tm_file="elfos.h newlib-stdint.h iq2000/iq2000.h"
1590         out_file=iq2000/iq2000.c
1591         md_file=iq2000/iq2000.md
1592         ;;
1593 lm32-*-elf*)
1594         tm_file="dbxelf.h elfos.h ${tm_file}"
1595         tmake_file="${tmake_file} lm32/t-lm32"
1596         ;;
1597 lm32-*-rtems*)
1598         tm_file="dbxelf.h elfos.h ${tm_file} lm32/rtems.h rtems.h newlib-stdint.h"
1599         tmake_file="${tmake_file} lm32/t-lm32"
1600         tmake_file="${tmake_file} t-rtems"
1601         tmake_file="${tmake_file} lm32/t-rtems"
1602          ;;
1603 lm32-*-uclinux*)
1604         tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h lm32/uclinux-elf.h"
1605         tmake_file="${tmake_file} lm32/t-lm32"
1606         ;;
1607 m32r-*-elf*)
1608         tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
1609         ;;
1610 m32rle-*-elf*)
1611         tm_file="dbxelf.h elfos.h newlib-stdint.h m32r/little.h ${tm_file}"
1612         ;;
1613 m32r-*-rtems*)
1614         tm_file="dbxelf.h elfos.h ${tm_file} m32r/rtems.h rtems.h newlib-stdint.h"
1615         tmake_file="m32r/t-m32r t-rtems"
1616         ;;
1617 m32r-*-linux*)
1618         tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} m32r/linux.h"
1619         # We override the tmake_file for linux -- why?
1620         tmake_file="m32r/t-linux t-slibgcc"
1621         gnu_ld=yes
1622         if test x$enable_threads = xyes; then
1623                 thread_file='posix'
1624         fi
1625         ;;
1626 m32rle-*-linux*)
1627         tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h m32r/little.h ${tm_file} m32r/linux.h"
1628         # We override the tmake_file for linux -- why?
1629         tmake_file="m32r/t-linux t-slibgcc"
1630         gnu_ld=yes
1631         if test x$enable_threads = xyes; then
1632                 thread_file='posix'
1633         fi
1634         ;;
1635 m68k-*-elf* | fido-*-elf*)
1636         case ${target} in
1637         fido-*-elf*)
1638                 # Check that $with_cpu makes sense.
1639                 case $with_cpu in
1640                 "" | "fidoa")
1641                         ;;
1642                 *)
1643                         echo "Cannot accept --with-cpu=$with_cpu"
1644                         exit 1
1645                         ;;
1646                 esac
1647                 with_cpu=fidoa
1648                 ;;
1649         *)
1650                 default_m68k_cpu=68020
1651                 default_cf_cpu=5206
1652                 ;;
1653         esac
1654         tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h newlib-stdint.h m68k/m68kemb.h m68k/m68020-elf.h"
1655         tm_defines="${tm_defines} MOTOROLA=1"
1656         tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-m68kelf"
1657         # Add multilibs for targets other than fido.
1658         case ${target} in
1659         fido-*-elf*)
1660                 ;;
1661         *)
1662                 tmake_file="$tmake_file m68k/t-mlibs"
1663                 ;;
1664         esac
1665         ;;
1666 m68k*-*-netbsdelf*)
1667         default_m68k_cpu=68020
1668         default_cf_cpu=5475
1669         tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
1670         extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1671         tm_defines="${tm_defines} MOTOROLA=1"
1672         ;;
1673 m68k*-*-openbsd*)
1674         default_m68k_cpu=68020
1675         default_cf_cpu=5475
1676         # needed to unconfuse gdb
1677         tm_defines="${tm_defines} OBSD_OLD_GAS"
1678         tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h m68k/openbsd.h"
1679         extra_options="${extra_options} openbsd.opt"
1680         tmake_file="t-openbsd m68k/t-openbsd"
1681         # we need collect2 until our bug is fixed...
1682         use_collect2=yes
1683         ;;
1684 m68k-*-uclinux*)                # Motorola m68k/ColdFire running uClinux
1685                                 # with uClibc, using the new GNU/Linux-style
1686                                 # ABI.
1687         default_m68k_cpu=68020
1688         default_cf_cpu=5206
1689         tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h"
1690         extra_options="${extra_options} m68k/uclinux.opt"
1691         tm_defines="${tm_defines} MOTOROLA=1"
1692         tmake_file="m68k/t-floatlib m68k/t-uclinux m68k/t-mlibs"
1693         ;;
1694 m68k-*-linux*)                  # Motorola m68k's running GNU/Linux
1695                                 # with ELF format using glibc 2
1696                                 # aka the GNU/Linux C library 6.
1697         default_m68k_cpu=68020
1698         default_cf_cpu=5475
1699         with_arch=${with_arch:-m68k}
1700         tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h m68k/linux.h ./sysroot-suffix.h"
1701         extra_options="${extra_options} m68k/ieee.opt"
1702         tm_defines="${tm_defines} MOTOROLA=1"
1703         tmake_file="${tmake_file} m68k/t-floatlib m68k/t-linux m68k/t-mlibs"
1704         ;;
1705 m68k-*-rtems*)
1706         default_m68k_cpu=68020
1707         default_cf_cpu=5206
1708         tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems m68k/t-mlibs"
1709         tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h newlib-stdint.h"
1710         tm_defines="${tm_defines} MOTOROLA=1"
1711         ;;
1712 mcore-*-elf)
1713         tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file} mcore/mcore-elf.h"
1714         tmake_file=mcore/t-mcore
1715         inhibit_libc=true
1716         ;;
1717 mep-*-*)
1718         tm_file="dbxelf.h elfos.h ${tm_file}"
1719         tmake_file=mep/t-mep
1720         c_target_objs="mep-pragma.o"
1721         cxx_target_objs="mep-pragma.o"
1722         if test -d "${srcdir}/../newlib/libc/include" &&
1723            test "x$with_headers" = x; then
1724                 with_headers=yes
1725         fi
1726         use_gcc_stdint=wrap
1727         ;;
1728 microblaze*-linux*)
1729         tm_file="${tm_file} dbxelf.h gnu-user.h linux.h microblaze/linux.h"
1730         c_target_objs="${c_target_objs} microblaze-c.o"
1731         cxx_target_objs="${cxx_target_objs} microblaze-c.o"
1732         ;;
1733 microblaze*-*-rtems*)
1734         tm_file="${tm_file} dbxelf.h"
1735         tm_file="${tm_file} microblaze/rtems.h rtems.h newlib-stdint.h"
1736         c_target_objs="${c_target_objs} microblaze-c.o"
1737         cxx_target_objs="${cxx_target_objs} microblaze-c.o"
1738         tmake_file="${tmake_file} microblaze/t-microblaze"
1739         tmake_file="${tmake_file} t-rtems microblaze/t-rtems"
1740         ;;
1741 microblaze*-*-*)
1742         tm_file="${tm_file} dbxelf.h"
1743         c_target_objs="${c_target_objs} microblaze-c.o"
1744         cxx_target_objs="${cxx_target_objs} microblaze-c.o"
1745         tmake_file="${tmake_file} microblaze/t-microblaze"
1746         ;;
1747 mips-sgi-irix6.5*)
1748         tm_file="elfos.h ${tm_file} mips/iris6.h"
1749         tmake_file="mips/t-irix6 t-slibgcc"
1750         c_target_objs="irix6-c.o"
1751         cxx_target_objs="irix6-c.o"
1752         extra_options="${extra_options} rpath.opt mips/iris6.opt"
1753         target_cpu_default="MASK_ABICALLS"
1754         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
1755         # Only IRIX Development Foundation 1.3 for IRIX 6.5 provides stdint.h.
1756         use_gcc_stdint=wrap
1757         if test "x$stabs" = xyes
1758         then
1759                 tm_file="${tm_file} dbx.h"
1760         fi
1761         if test "x$gnu_ld" = xyes
1762         then
1763                 tm_defines="${tm_defines} IRIX_USING_GNU_LD"
1764         fi
1765         case ${enable_threads}:${have_pthread_h} in
1766           "":yes | yes:yes ) thread_file=posix ;;
1767         esac
1768         ;;
1769 mips*-*-netbsd*)                        # NetBSD/mips, either endian.
1770         target_cpu_default="MASK_ABICALLS"
1771         tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
1772         extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1773         ;;
1774 mips64*-*-linux* | mipsisa64*-*-linux*)
1775         tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/gnu-user64.h mips/linux64.h"
1776         tmake_file="${tmake_file} mips/t-linux64"
1777         tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_N32"
1778         case ${target} in
1779                 mips64el-st-linux-gnu)
1780                         tm_file="${tm_file} mips/st.h"
1781                         tmake_file="${tmake_file} mips/t-st"
1782                         ;;
1783                 mips64octeon*-*-linux*)
1784                         tm_defines="${tm_defines} MIPS_CPU_STRING_DEFAULT=\\\"octeon\\\""
1785                         target_cpu_default=MASK_SOFT_FLOAT_ABI
1786                         ;;
1787                 mipsisa64r2*-*-linux*)
1788                         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=65"
1789                         ;;
1790         esac
1791         gnu_ld=yes
1792         gas=yes
1793         test x$with_llsc != x || with_llsc=yes
1794         ;;
1795 mips*-*-linux*)                         # Linux MIPS, either endian.
1796         tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h"
1797         if test x$enable_targets = xall; then
1798                 tm_file="${tm_file} mips/gnu-user64.h mips/linux64.h"
1799                 tmake_file="${tmake_file} mips/t-linux64"
1800         fi
1801         case ${target} in
1802         mipsisa32r2*)
1803                 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33"
1804                 ;;
1805         mipsisa32*)
1806                 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1807         esac
1808         test x$with_llsc != x || with_llsc=yes
1809         ;;
1810 mips*-*-openbsd*)
1811         tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
1812         target_cpu_default="MASK_ABICALLS"
1813         tm_file="mips/mips.h openbsd.h openbsd-stdint.h openbsd-libpthread.h mips/openbsd.h mips/sdb.h"
1814         extra_options="${extra_options} openbsd.opt"
1815         case ${target} in
1816         mips*el-*-openbsd*)
1817             tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";;
1818         *)  tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";;
1819         esac
1820         ;;
1821 mips*-sde-elf*)
1822         tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/sde.h"
1823         tmake_file="mips/t-sde"
1824         extra_options="${extra_options} mips/sde.opt"
1825         case "${with_newlib}" in
1826           yes)
1827             # newlib / libgloss.
1828             ;;
1829           *)
1830             # MIPS toolkit libraries.
1831             tm_file="$tm_file mips/sdemtk.h"
1832             tmake_file="$tmake_file mips/t-sdemtk"
1833             case ${enable_threads} in
1834               "" | yes | mipssde)
1835                 thread_file='mipssde'
1836                 ;;
1837             esac
1838             ;;
1839         esac
1840         case ${target} in
1841           mipsisa32r2*)
1842             tm_defines="MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_32"
1843             ;;
1844           mipsisa32*)
1845             tm_defines="MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_32"
1846             ;;
1847           mipsisa64r2*)
1848             tm_defines="MIPS_ISA_DEFAULT=65 MIPS_ABI_DEFAULT=ABI_N32"
1849             ;;
1850           mipsisa64*)
1851             tm_defines="MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_N32"
1852             ;;
1853         esac
1854         ;;
1855 mipsisa32-*-elf* | mipsisa32el-*-elf* | \
1856 mipsisa32r2-*-elf* | mipsisa32r2el-*-elf* | \
1857 mipsisa64-*-elf* | mipsisa64el-*-elf* | \
1858 mipsisa64r2-*-elf* | mipsisa64r2el-*-elf*)
1859         tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1860         tmake_file="mips/t-isa3264"
1861         case ${target} in
1862           mipsisa32r2*)
1863             tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33"
1864             ;;
1865           mipsisa32*)
1866             tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1867             ;;
1868           mipsisa64r2*)
1869             tm_defines="${tm_defines} MIPS_ISA_DEFAULT=65"
1870             ;;
1871           mipsisa64*)
1872             tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64"
1873             ;;
1874         esac
1875         case ${target} in
1876           mipsisa32*-*-elfoabi*)
1877             tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_32"
1878             tm_file="${tm_file} mips/elfoabi.h"
1879             ;;
1880           mipsisa64*-*-elfoabi*)
1881             tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_O64"
1882             tm_file="${tm_file} mips/elfoabi.h"
1883             ;;
1884           *-*-elf*)
1885             tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
1886             ;;
1887         esac
1888         ;;
1889 mipsisa64sr71k-*-elf*)
1890         tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1891         tmake_file=mips/t-sr71k
1892         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1893         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
1894         ;;
1895 mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
1896         tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1897         tmake_file="mips/t-elf mips/t-sb1"
1898         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1899         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
1900         ;;
1901 mips-*-elf* | mipsel-*-elf*)
1902         tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1903         tmake_file="mips/t-elf"
1904         ;;
1905 mips64-*-toppers* | mips64el-*-toppers*)
1906         tm_file="elfos.h ${tm_file} mips/elf.h mips/toppers.h"
1907         tmake_file="mips/t-elf mips/t-libgcc-mips16"
1908         tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_N32"
1909         ;;
1910 mips64-*-elf* | mips64el-*-elf*)
1911         tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1912         tmake_file="mips/t-elf"
1913         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1914         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1915         ;;
1916 mips64vr-*-elf* | mips64vrel-*-elf*)
1917         tm_file="elfos.h newlib-stdint.h ${tm_file} mips/vr.h mips/elf.h"
1918         tmake_file=mips/t-vr
1919         tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
1920         ;;
1921 mips64orion-*-elf* | mips64orionel-*-elf*)
1922         tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elforion.h mips/elf.h"
1923         tmake_file="mips/t-elf"
1924         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1925         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1926         ;;
1927 mips*-*-rtems*)
1928         tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
1929         tmake_file="mips/t-elf t-rtems mips/t-rtems"
1930         ;;
1931 mips-wrs-vxworks)
1932         tm_file="elfos.h ${tm_file} mips/elf.h vx-common.h vxworks.h mips/vxworks.h"
1933         tmake_file="${tmake_file} mips/t-vxworks"
1934         ;;
1935 mipstx39-*-elf* | mipstx39el-*-elf*)
1936         tm_file="elfos.h newlib-stdint.h ${tm_file} mips/r3900.h mips/elf.h"
1937         tmake_file="mips/t-r3900"
1938         ;;
1939 mmix-knuth-mmixware)
1940         tm_file="${tm_file} newlib-stdint.h"
1941         need_64bit_hwint=yes
1942         use_gcc_stdint=wrap
1943         ;;
1944 mn10300-*-*)
1945         tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
1946         if test x$stabs = xyes
1947         then
1948                 tm_file="${tm_file} dbx.h"
1949         fi
1950         use_collect2=no
1951         use_gcc_stdint=wrap
1952         ;;
1953 pdp11-*-*)
1954         tm_file="${tm_file} newlib-stdint.h"
1955         use_gcc_stdint=wrap
1956         ;;
1957 picochip-*)
1958         tm_file="${tm_file} newlib-stdint.h"
1959         use_gcc_stdint=wrap
1960         tmake_file="picochip/t-picochip t-pnt16-warn"
1961         ;;
1962 # port not yet contributed
1963 #powerpc-*-openbsd*)
1964 #       tmake_file="${tmake_file} rs6000/t-fprules"
1965 #       extra_headers=
1966 #       ;;
1967 powerpc-*-darwin*)
1968         extra_options="${extra_options} rs6000/darwin.opt"
1969         case ${target} in
1970           *-darwin1[0-9]* | *-darwin[8-9]*)
1971             tmake_file="${tmake_file} rs6000/t-darwin8"
1972             tm_file="${tm_file} rs6000/darwin8.h"
1973             ;;
1974           *-darwin7*)
1975             tm_file="${tm_file} rs6000/darwin7.h"
1976             ;;
1977           *-darwin[0-6]*)
1978             ;;
1979         esac
1980         tmake_file="${tmake_file} t-slibgcc"
1981         extra_headers=altivec.h
1982         ;;
1983 powerpc64-*-darwin*)
1984         extra_options="${extra_options} ${cpu_type}/darwin.opt"
1985         tmake_file="${tmake_file} ${cpu_type}/t-darwin64 t-slibgcc"
1986         tm_file="${tm_file} ${cpu_type}/darwin8.h ${cpu_type}/darwin64.h"
1987         extra_headers=altivec.h
1988         ;;
1989 powerpc*-*-freebsd*)
1990         tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h"
1991         extra_options="${extra_options} rs6000/sysv4.opt"
1992         tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1993         case ${target} in
1994              powerpc64*)
1995                 tm_file="${tm_file} rs6000/default64.h rs6000/freebsd64.h"
1996                 tmake_file="${tmake_file} rs6000/t-freebsd64"
1997                 extra_options="${extra_options} rs6000/linux64.opt"
1998                 ;;
1999              *)
2000                 tm_file="${tm_file} rs6000/freebsd.h"
2001                 ;;
2002         esac
2003         ;;
2004 powerpc-*-netbsd*)
2005         tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
2006         extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
2007         tmake_file="${tmake_file} rs6000/t-netbsd"
2008         extra_options="${extra_options} rs6000/sysv4.opt"
2009         ;;
2010 powerpc-*-eabispe*)
2011         tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabispe.h"
2012         extra_options="${extra_options} rs6000/sysv4.opt"
2013         tmake_file="rs6000/t-spe rs6000/t-ppccomm"
2014         use_gcc_stdint=wrap
2015         ;;
2016 powerpc-*-eabisimaltivec*)
2017         tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h rs6000/eabialtivec.h"
2018         extra_options="${extra_options} rs6000/sysv4.opt"
2019         tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
2020         use_gcc_stdint=wrap
2021         ;;
2022 powerpc-*-eabisim*)
2023         tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
2024         extra_options="${extra_options} rs6000/sysv4.opt"
2025         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
2026         use_gcc_stdint=wrap
2027         ;;
2028 powerpc-*-elf*)
2029         tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h"
2030         extra_options="${extra_options} rs6000/sysv4.opt"
2031         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
2032         ;;
2033 powerpc-*-eabialtivec*)
2034         tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabialtivec.h"
2035         extra_options="${extra_options} rs6000/sysv4.opt"
2036         tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
2037         use_gcc_stdint=wrap
2038         ;;
2039 powerpc-xilinx-eabi*)
2040         tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/singlefp.h rs6000/xfpu.h rs6000/xilinx.h"
2041         extra_options="${extra_options} rs6000/sysv4.opt rs6000/xilinx.opt"
2042         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm rs6000/t-xilinx"
2043         use_gcc_stdint=wrap
2044         ;;
2045 powerpc-*-eabi*)
2046         tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
2047         extra_options="${extra_options} rs6000/sysv4.opt"
2048         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
2049         use_gcc_stdint=wrap
2050         ;;
2051 powerpc-*-rtems*)
2052         tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/rtems.h rtems.h"
2053         extra_options="${extra_options} rs6000/sysv4.opt"
2054         tmake_file="rs6000/t-fprules rs6000/t-rtems t-rtems rs6000/t-ppccomm"
2055         ;;
2056 powerpc-*-linux* | powerpc64-*-linux*)
2057         tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h rs6000/sysv4.h"
2058         extra_options="${extra_options} rs6000/sysv4.opt"
2059         tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
2060         maybe_biarch=yes
2061         case ${target} in
2062             powerpc64-*-linux*spe* | powerpc64-*-linux*paired*)
2063                 echo "*** Configuration ${target} not supported" 1>&2
2064                 exit 1
2065                 ;;
2066             powerpc-*-linux*spe* | powerpc-*-linux*paired*)
2067                 maybe_biarch=
2068                 ;;
2069             powerpc64-*-linux*)
2070                 test x$with_cpu != x || cpu_is_64bit=yes
2071                 maybe_biarch=always
2072                 ;;
2073         esac
2074         case ${maybe_biarch}:${enable_targets}:${cpu_is_64bit} in
2075             always:* | yes:*powerpc64* | yes:all:* | yes:*:yes)
2076                 if test x$cpu_is_64bit = xyes; then
2077                     tm_file="${tm_file} rs6000/default64.h"
2078                 fi
2079                 tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h glibc-stdint.h"
2080                 tmake_file="$tmake_file rs6000/t-linux64"
2081                 extra_options="${extra_options} rs6000/linux64.opt"
2082                 ;;
2083             *)
2084                 tm_file="${tm_file} rs6000/linux.h glibc-stdint.h"
2085                 tmake_file="$tmake_file rs6000/t-linux"
2086                 ;;
2087         esac
2088         case ${target} in
2089             powerpc*-*-linux*ppc476*)
2090                 tm_file="${tm_file} rs6000/476.h"
2091                 extra_options="${extra_options} rs6000/476.opt" ;;
2092             powerpc*-*-linux*altivec*)
2093                 tm_file="${tm_file} rs6000/linuxaltivec.h" ;;
2094             powerpc*-*-linux*spe*)
2095                 tm_file="${tm_file} rs6000/linuxspe.h rs6000/e500.h" ;;
2096             powerpc*-*-linux*paired*)
2097                 tm_file="${tm_file} rs6000/750cl.h" ;;
2098         esac
2099         if test x${enable_secureplt} = xyes; then
2100                 tm_file="rs6000/secureplt.h ${tm_file}"
2101         fi
2102         ;;
2103 powerpc-wrs-vxworks|powerpc-wrs-vxworksae)
2104         tm_file="${tm_file} elfos.h freebsd-spec.h rs6000/sysv4.h"
2105         tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-ppccomm rs6000/t-vxworks"
2106         extra_options="${extra_options} rs6000/sysv4.opt"
2107         extra_headers=ppc-asm.h
2108         case ${target} in
2109           *-vxworksae*)
2110             tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/e500.h"
2111             tmake_file="${tmake_file} rs6000/t-vxworksae"
2112             ;;
2113           *-vxworks*)
2114             tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h rs6000/e500.h"
2115             ;;
2116         esac
2117         ;;
2118 powerpc-*-lynxos*)
2119         xm_defines=POSIX
2120         tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
2121         tmake_file="t-lynx rs6000/t-lynx"
2122         extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
2123         thread_file=lynx
2124         gnu_ld=yes
2125         gas=yes
2126         ;;
2127 powerpcle-*-elf*)
2128         tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h"
2129         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
2130         extra_options="${extra_options} rs6000/sysv4.opt"
2131         ;;
2132 powerpcle-*-eabisim*)
2133         tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
2134         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
2135         extra_options="${extra_options} rs6000/sysv4.opt"
2136         use_gcc_stdint=wrap
2137         ;;
2138 powerpcle-*-eabi*)
2139         tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h"
2140         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
2141         extra_options="${extra_options} rs6000/sysv4.opt"
2142         use_gcc_stdint=wrap
2143         ;;
2144 rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
2145         tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h rs6000/aix-stdint.h"
2146         tmake_file="rs6000/t-aix43 t-slibgcc"
2147         extra_options="${extra_options} rs6000/aix64.opt"
2148         use_collect2=yes
2149         thread_file='aix'
2150         use_gcc_stdint=provide
2151         extra_headers=
2152         ;;
2153 rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
2154         tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h rs6000/aix-stdint.h"
2155         extra_options="${extra_options} rs6000/aix64.opt"
2156         tmake_file="rs6000/t-aix43 t-slibgcc"
2157         use_collect2=yes
2158         thread_file='aix'
2159         use_gcc_stdint=wrap
2160         extra_headers=
2161         ;;
2162 rs6000-ibm-aix5.2.* | powerpc-ibm-aix5.2.*)
2163         tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h rs6000/aix-stdint.h"
2164         tmake_file="rs6000/t-aix52 t-slibgcc"
2165         extra_options="${extra_options} rs6000/aix64.opt"
2166         use_collect2=yes
2167         thread_file='aix'
2168         use_gcc_stdint=wrap
2169         extra_headers=
2170         ;;
2171 rs6000-ibm-aix5.3.* | powerpc-ibm-aix5.3.*)
2172         tm_file="${tm_file} rs6000/aix.h rs6000/aix53.h rs6000/xcoff.h rs6000/aix-stdint.h"
2173         tmake_file="rs6000/t-aix52 t-slibgcc"
2174         extra_options="${extra_options} rs6000/aix64.opt"
2175         use_collect2=yes
2176         thread_file='aix'
2177         use_gcc_stdint=wrap
2178         extra_headers=altivec.h
2179         ;;
2180 rs6000-ibm-aix[6789].* | powerpc-ibm-aix[6789].*)
2181         tm_file="${tm_file} rs6000/aix.h rs6000/aix61.h rs6000/xcoff.h rs6000/aix-stdint.h"
2182         tmake_file="rs6000/t-aix52 t-slibgcc"
2183         extra_options="${extra_options} rs6000/aix64.opt"
2184         use_collect2=yes
2185         thread_file='aix'
2186         use_gcc_stdint=wrap
2187         extra_headers=altivec.h
2188         ;;
2189 rl78-*-elf*)
2190         tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
2191         target_has_targetm_common=no
2192         c_target_objs="rl78-c.o"
2193         cxx_target_objs="rl78-c.o"
2194         tmake_file="${tmake_file} rl78/t-rl78"
2195         ;;
2196 rx-*-elf*)
2197         tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
2198         tmake_file="${tmake_file} rx/t-rx"
2199         ;;
2200 s390-*-linux*)
2201         tm_file="s390/s390.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h"
2202         if test x$enable_targets = xall; then
2203                 tmake_file="${tmake_file} s390/t-linux64"
2204         fi
2205         ;;
2206 s390x-*-linux*)
2207         tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h"
2208         tm_p_file=s390/s390-protos.h
2209         md_file=s390/s390.md
2210         extra_modes=s390/s390-modes.def
2211         out_file=s390/s390.c
2212         tmake_file="${tmake_file} s390/t-linux64"
2213         ;;
2214 s390x-ibm-tpf*)
2215         tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h s390/tpf.h"
2216         tm_p_file=s390/s390-protos.h
2217         md_file=s390/s390.md
2218         extra_modes=s390/s390-modes.def
2219         out_file=s390/s390.c
2220         thread_file='tpf'
2221         extra_options="${extra_options} s390/tpf.opt"
2222         ;;
2223 score-*-elf)
2224         gas=yes
2225         gnu_ld=yes
2226         tm_file="dbxelf.h elfos.h score/elf.h score/score.h newlib-stdint.h"
2227         ;;
2228 sh-*-elf* | sh[12346l]*-*-elf* | \
2229   sh-*-linux* | sh[2346lbe]*-*-linux* | \
2230   sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
2231   sh64-*-netbsd* | sh64l*-*-netbsd*)
2232         tmake_file="${tmake_file} sh/t-sh sh/t-elf"
2233         if test x${with_endian} = x; then
2234                 case ${target} in
2235                 sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;;
2236                 shbe-*-* | sheb-*-*)               with_endian=big,little ;;
2237                 sh[1234]l* | sh[34]*-*-linux*)     with_endian=little ;;
2238                 shl* | sh64l* | sh*-*-linux* | \
2239                   sh5l* | sh-superh-elf)           with_endian=little,big ;;
2240                 sh[1234]*-*-*)                     with_endian=big ;;
2241                 *)                                 with_endian=big,little ;;
2242                 esac
2243         fi
2244         # TM_ENDIAN_CONFIG is used by t-sh to determine multilibs.
2245         #  First word : the default endian.
2246         #  Second word: the secondary endian (optional).
2247         case ${with_endian} in
2248         big)            TM_ENDIAN_CONFIG=mb ;;
2249         little)         TM_ENDIAN_CONFIG=ml ;;
2250         big,little)     TM_ENDIAN_CONFIG="mb ml" ;;
2251         little,big)     TM_ENDIAN_CONFIG="ml mb" ;;
2252         *)      echo "with_endian=${with_endian} not supported."; exit 1 ;;
2253         esac
2254         case ${with_endian} in
2255         little*)        tm_file="sh/little.h ${tm_file}" ;;
2256         esac
2257         tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h"
2258         case ${target} in
2259         sh*-*-linux*)   tmake_file="${tmake_file} sh/t-linux"
2260                         tm_file="${tm_file} gnu-user.h linux.h glibc-stdint.h sh/linux.h" ;;
2261         sh*-*-netbsd*)
2262                         tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h"
2263                         extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
2264
2265                         ;;
2266         sh*-superh-elf) if test x$with_libgloss != xno; then
2267                                 with_libgloss=yes
2268                                 tm_file="${tm_file} sh/newlib.h"
2269                         fi
2270                         tm_file="${tm_file} sh/embed-elf.h"
2271                         tm_file="${tm_file} sh/superh.h"
2272                         extra_options="${extra_options} sh/superh.opt" ;;
2273         *)              if test x$with_newlib = xyes \
2274                            && test x$with_libgloss = xyes; then
2275                                 tm_file="${tm_file} sh/newlib.h"
2276                         fi
2277                         tm_file="${tm_file} sh/embed-elf.h" ;;
2278         esac
2279         case ${target} in
2280         sh5*-*-netbsd*)
2281                 # SHmedia, 32-bit ABI
2282                 tmake_file="${tmake_file} sh/t-sh64"
2283                 ;;
2284         sh64*-netbsd*)
2285                 # SHmedia, 64-bit ABI
2286                 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd-sh5-64"
2287                 ;;
2288         *-*-netbsd)
2289                 ;;
2290         sh64*-*-linux*)
2291                 tmake_file="${tmake_file} sh/t-sh64"
2292                 tm_file="${tm_file} sh/sh64.h"
2293                 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2294                 ;;
2295         sh64*)
2296                 tmake_file="${tmake_file} sh/t-sh64"
2297                 tm_file="${tm_file} sh/sh64.h"
2298                 if test x$with_newlib = xyes; then
2299                         tm_file="${tm_file} newlib-stdint.h"
2300                 fi
2301                 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2302                 ;;
2303         *-*-elf*)
2304                 tm_file="${tm_file} newlib-stdint.h"
2305                 ;;
2306         esac
2307         # sed el/eb endian suffixes away to avoid confusion with sh[23]e
2308         case `echo ${target} | sed 's/e[lb]-/-/'` in
2309         sh64*-*-netbsd*)        sh_cpu_target=sh5-64media ;;
2310         sh64* | sh5*-*-netbsd*) sh_cpu_target=sh5-32media ;;
2311         sh4a_single_only*)      sh_cpu_target=sh4a-single-only ;;
2312         sh4a_single*)           sh_cpu_target=sh4a-single ;;
2313         sh4a_nofpu*)            sh_cpu_target=sh4a-nofpu ;;
2314         sh4al)                  sh_cpu_target=sh4al ;;
2315         sh4a*)                  sh_cpu_target=sh4a ;;
2316         sh4_single_only*)       sh_cpu_target=sh4-single-only ;;
2317         sh4_single*)            sh_cpu_target=sh4-single ;;
2318         sh4_nofpu*)             sh_cpu_target=sh4-nofpu ;;
2319         sh4* | sh-superh-*)     sh_cpu_target=sh4 ;;
2320         sh3e*)                  sh_cpu_target=sh3e ;;
2321         sh*-*-netbsd* | sh3*)   sh_cpu_target=sh3 ;;
2322         sh2a_single_only*)      sh_cpu_target=sh2a-single-only ;;
2323         sh2a_single*)           sh_cpu_target=sh2a-single ;;
2324         sh2a_nofpu*)            sh_cpu_target=sh2a-nofpu ;;
2325         sh2a*)                  sh_cpu_target=sh2a ;;
2326         sh2e*)                  sh_cpu_target=sh2e ;;
2327         sh2*)                   sh_cpu_target=sh2 ;;
2328         *)                      sh_cpu_target=sh1 ;;
2329         esac
2330         # did the user say --without-fp ?
2331         if test x$with_fp = xno; then
2332                 case ${sh_cpu_target} in
2333                 sh5-*media)     sh_cpu_target=${sh_cpu_target}-nofpu ;;
2334                 sh4al | sh1)    ;;
2335                 sh4a* )         sh_cpu_target=sh4a-nofpu ;;
2336                 sh4*)           sh_cpu_target=sh4-nofpu ;;
2337                 sh3*)           sh_cpu_target=sh3 ;;
2338                 sh2a*)          sh_cpu_target=sh2a-nofpu ;;
2339                 sh2*)           sh_cpu_target=sh2 ;;
2340                 *)      echo --without-fp not available for $target: ignored
2341                 esac
2342                 tm_defines="$tm_defines STRICT_NOFPU=1"
2343         fi
2344         sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`"
2345         case $sh_cpu_default in
2346         sh5-64media-nofpu | sh5-64media | \
2347           sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \
2348           sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
2349           sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
2350           sh4-single-only | sh4-single | sh4-nofpu | sh4 | sh4-300 | \
2351           sh3e | sh3 | sh2e | sh2 | sh1) ;;
2352         "")     sh_cpu_default=${sh_cpu_target} ;;
2353         *)      echo "with_cpu=$with_cpu not supported"; exit 1 ;;
2354         esac
2355         sh_multilibs=${with_multilib_list}
2356         if test "$sh_multilibs" = "default" ; then
2357                 case ${target} in
2358                 sh64-superh-linux* | \
2359                 sh[1234]*)      sh_multilibs=${sh_cpu_target} ;;
2360                 sh64* | sh5*)   sh_multilibs=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu ;;
2361                 sh-superh-*)    sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;;
2362                 sh*-*-linux*)   sh_multilibs=m1,m2,m2a,m3e,m4 ;;
2363                 sh*-*-netbsd*)  sh_multilibs=m3,m3e,m4 ;;
2364                 *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;;
2365                 esac
2366                 if test x$with_fp = xno; then
2367                         sh_multilibs="`echo $sh_multilibs|sed -e s/m4/sh4-nofpu/ -e s/,m4-[^,]*//g -e s/,m[23]e// -e s/m2a,m2a-single/m2a-nofpu/ -e s/m5-..m....,//g`"
2368                 fi
2369         fi
2370         target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`
2371         tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"'
2372         tm_defines="$tm_defines SUPPORT_`echo $sh_cpu_default | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
2373         sh_multilibs=`echo $sh_multilibs | sed -e 's/,/ /g' -e 's/^[Ss][Hh]/m/' -e 's/ [Ss][Hh]/ m/g' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-`
2374         for sh_multilib in ${sh_multilibs}; do
2375                 case ${sh_multilib} in
2376                 m1 | m2 | m2e | m3 | m3e | \
2377                 m4 | m4-single | m4-single-only | m4-nofpu | m4-300 |\
2378                 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al | \
2379                 m2a | m2a-single | m2a-single-only | m2a-nofpu | \
2380                 m5-64media | m5-64media-nofpu | \
2381                 m5-32media | m5-32media-nofpu | \
2382                 m5-compact | m5-compact-nofpu)
2383                         # TM_MULTILIB_CONFIG is used by t-sh for the non-endian multilib definition
2384                         # It is passed to MULTIILIB_OPTIONS verbatim.
2385                         TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG}/${sh_multilib}"
2386                         tm_defines="$tm_defines SUPPORT_`echo $sh_multilib | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
2387                         ;;
2388                 \!*)    # TM_MULTILIB_EXCEPTIONS_CONFIG is used by t-sh
2389                         # It is passed the MULTILIB_EXCEPTIONS verbatim.
2390                         TM_MULTILIB_EXCEPTIONS_CONFIG="${TM_MULTILIB_EXCEPTIONS_CONFIG} `echo $sh_multilib | sed 's/^!//'`" ;;
2391                 *)
2392                         echo "with_multilib_list=${sh_multilib} not supported."
2393                         exit 1
2394                         ;;
2395                 esac
2396         done
2397         TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's:^/::'`
2398         if test x${enable_incomplete_targets} = xyes ; then
2399                 tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1"
2400         fi
2401         tm_file="$tm_file ./sysroot-suffix.h"
2402         tmake_file="$tmake_file t-sysroot-suffix"
2403         ;;
2404 sh-*-rtems*)
2405         tmake_file="sh/t-sh t-rtems sh/t-rtems"
2406         tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h newlib-stdint.h"
2407         ;;
2408 sh-wrs-vxworks)
2409         tmake_file="$tmake_file sh/t-sh sh/t-vxworks"
2410         tm_file="${tm_file} elfos.h sh/elf.h sh/embed-elf.h vx-common.h vxworks.h sh/vxworks.h"
2411         ;;
2412 sparc-*-elf*)
2413         tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp-elf.h"
2414         case ${target} in
2415             *-leon-*)
2416                 tmake_file="sparc/t-sparc sparc/t-leon"
2417                 ;;
2418             *-leon[3-9]*)
2419                 tmake_file="sparc/t-sparc sparc/t-leon3"
2420                 ;;
2421             *)
2422                 tmake_file="sparc/t-sparc sparc/t-elf"
2423                 ;;
2424         esac
2425         ;;
2426 sparc-*-rtems*)
2427         tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h newlib-stdint.h"
2428         tmake_file="sparc/t-sparc sparc/t-elf sparc/t-rtems t-rtems"
2429         ;;
2430 sparc-*-linux*)
2431         tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/tso.h"
2432         extra_options="${extra_options} sparc/long-double-switch.opt"
2433         case ${target} in
2434             *-leon-*)
2435                 tmake_file="${tmake_file} sparc/t-sparc sparc/t-leon"
2436                 ;;
2437             *-leon[3-9]*)
2438                 tmake_file="${tmake_file} sparc/t-sparc sparc/t-leon3"
2439                 ;;
2440             *)
2441                 tmake_file="${tmake_file} sparc/t-sparc"
2442                 ;;
2443         esac
2444         if test x$enable_targets = xall; then
2445                 tm_file="sparc/biarch64.h ${tm_file} sparc/linux64.h"
2446                 tmake_file="${tmake_file} sparc/t-linux64"
2447         else
2448                 tm_file="${tm_file} sparc/linux.h"
2449                 tmake_file="${tmake_file} sparc/t-linux"
2450         fi
2451         ;;
2452 sparc-*-netbsdelf*)
2453         tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2454         extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
2455         extra_options="${extra_options} sparc/long-double-switch.opt"
2456         tmake_file="${tmake_file} sparc/t-sparc"
2457         ;;
2458 sparc*-*-solaris2*)
2459         tm_file="sparc/biarch64.h ${tm_file} ${sol2_tm_file} sol2-bi.h sparc/tso.h"
2460         case ${target} in
2461             sparc64-*-* | sparcv9-*-*)
2462                 tm_file="sparc/default-64.h ${tm_file}"
2463                 ;;
2464             *)
2465                 test x$with_cpu != x || with_cpu=v9
2466                 ;;
2467         esac
2468         tmake_file="${tmake_file} sparc/t-sparc sparc/t-sol2-64"
2469         ;;
2470 sparc-wrs-vxworks)
2471         tm_file="${tm_file} elfos.h sparc/sysv4.h vx-common.h vxworks.h sparc/vxworks.h"
2472         tmake_file="${tmake_file} sparc/t-sparc sparc/t-vxworks"
2473         ;;
2474 sparc64-*-elf*)
2475         tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h"
2476         extra_options="${extra_options}"
2477         tmake_file="${tmake_file} sparc/t-sparc"
2478         ;;
2479 sparc64-*-rtems*)
2480         tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h sparc/rtemself.h rtems.h"
2481         extra_options="${extra_options}"
2482         tmake_file="${tmake_file} sparc/t-sparc sparc/t-rtems-64 t-rtems"
2483         ;;
2484 sparc64-*-linux*)
2485         tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/default-64.h sparc/linux64.h sparc/tso.h"
2486         extra_options="${extra_options} sparc/long-double-switch.opt"
2487         tmake_file="${tmake_file} sparc/t-sparc sparc/t-linux64"
2488         ;;
2489 sparc64-*-freebsd*|ultrasparc-*-freebsd*)
2490         tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
2491         extra_options="${extra_options} sparc/long-double-switch.opt"
2492         case "x$with_cpu" in
2493                 xultrasparc) ;;
2494                 x) with_cpu=ultrasparc ;;
2495                 *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
2496         esac
2497         tmake_file="${tmake_file} sparc/t-sparc"
2498         ;;
2499 sparc64-*-netbsd*)
2500         tm_file="sparc/biarch64.h ${tm_file}"
2501         tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2502         extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
2503         extra_options="${extra_options} sparc/long-double-switch.opt"
2504         tmake_file="${tmake_file} sparc/t-sparc sparc/t-netbsd64"
2505         ;;
2506 sparc64-*-openbsd*)
2507         tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/sp64-elf.h"
2508         tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h sparc/openbsd64.h"
2509         extra_options="${extra_options} openbsd.opt"
2510         extra_options="${extra_options}"
2511         gas=yes gnu_ld=yes
2512         with_cpu=ultrasparc
2513         tmake_file="${tmake_file} sparc/t-sparc"
2514         ;;
2515 spu-*-elf*)
2516         tm_file="dbxelf.h elfos.h spu/spu-elf.h spu/spu.h newlib-stdint.h"
2517         tmake_file="spu/t-spu-elf"
2518         native_system_header_dir=/include
2519         extra_headers="spu_intrinsics.h spu_internals.h vmx2spu.h spu_mfcio.h vec_types.h spu_cache.h"
2520         extra_modes=spu/spu-modes.def
2521         c_target_objs="${c_target_objs} spu-c.o"
2522         cxx_target_objs="${cxx_target_objs} spu-c.o"
2523         ;;
2524 tic6x-*-elf)
2525         tm_file="elfos.h ${tm_file} c6x/elf-common.h c6x/elf.h"
2526         tm_file="${tm_file} dbxelf.h tm-dwarf2.h newlib-stdint.h"
2527         tmake_file="c6x/t-c6x c6x/t-c6x-elf"
2528         use_collect2=no
2529         ;;
2530 tic6x-*-uclinux)
2531         tm_file="elfos.h ${tm_file} gnu-user.h linux.h c6x/elf-common.h c6x/uclinux-elf.h"
2532         tm_file="${tm_file} dbxelf.h tm-dwarf2.h glibc-stdint.h"
2533         tm_file="${tm_file} ./sysroot-suffix.h"
2534         tmake_file="t-sysroot-suffix t-slibgcc"
2535         tmake_file="${tmake_file} c6x/t-c6x c6x/t-c6x-elf c6x/t-c6x-uclinux"
2536         use_collect2=no
2537         ;;
2538 tilegx-*-linux*)
2539         tm_file="elfos.h gnu-user.h linux.h glibc-stdint.h tilegx/linux.h ${tm_file}"
2540         tmake_file="${tmake_file} tilegx/t-tilegx"
2541         extra_objs="mul-tables.o"
2542         c_target_objs="tilegx-c.o"
2543         cxx_target_objs="tilegx-c.o"
2544         extra_headers="feedback.h"
2545         ;;
2546 tilepro-*-linux*)
2547         tm_file="elfos.h gnu-user.h linux.h glibc-stdint.h tilepro/linux.h ${tm_file}"
2548         tmake_file="${tmake_file} tilepro/t-tilepro"
2549         extra_objs="mul-tables.o"
2550         c_target_objs="tilepro-c.o"
2551         cxx_target_objs="tilepro-c.o"
2552         extra_headers="feedback.h"
2553         ;;
2554 v850-*-rtems*)
2555         target_cpu_default="TARGET_CPU_generic"
2556         tm_file="dbxelf.h elfos.h v850/v850.h"
2557         tm_file="${tm_file} rtems.h v850/rtems.h newlib-stdint.h"
2558         tmake_file="${tmake_file} v850/t-v850"
2559         tmake_file="${tmake_file} t-rtems v850/t-rtems"
2560         use_collect2=no
2561         c_target_objs="v850-c.o"
2562         cxx_target_objs="v850-c.o"
2563         ;;
2564 v850*-*-*)
2565         case ${target} in
2566         v850e2v3-*-*)
2567                 target_cpu_default="TARGET_CPU_v850e2v3"
2568                 ;;
2569         v850e2-*-*)
2570                 target_cpu_default="TARGET_CPU_v850e2"
2571                 ;;
2572         v850e1-*-* | v850es-*-*)
2573                 target_cpu_default="TARGET_CPU_v850e1"
2574                 ;;
2575         v850e-*-*)
2576                 target_cpu_default="TARGET_CPU_v850e"
2577                 ;;
2578         v850-*-*)
2579                 target_cpu_default="TARGET_CPU_generic"
2580                 ;;
2581         esac
2582         tm_file="dbxelf.h elfos.h newlib-stdint.h v850/v850.h"
2583         if test x$stabs = xyes
2584         then
2585                 tm_file="${tm_file} dbx.h"
2586         fi
2587         use_collect2=no
2588         c_target_objs="v850-c.o"
2589         cxx_target_objs="v850-c.o"
2590         use_gcc_stdint=wrap
2591         ;;
2592 vax-*-linux*)
2593         tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h vax/elf.h vax/linux.h"
2594         extra_options="${extra_options} vax/elf.opt"
2595         ;;
2596 vax-*-netbsdelf*)
2597         tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
2598         extra_options="${extra_options} netbsd.opt netbsd-elf.opt vax/elf.opt"
2599         ;;
2600 vax-*-openbsd*)
2601         tm_file="vax/vax.h vax/openbsd1.h openbsd.h openbsd-stdint.h openbsd-pthread.h vax/openbsd.h"
2602         extra_options="${extra_options} openbsd.opt"
2603         use_collect2=yes
2604         ;;
2605 xstormy16-*-elf)
2606         # For historical reasons, the target files omit the 'x'.
2607         tm_file="dbxelf.h elfos.h newlib-stdint.h stormy16/stormy16.h"
2608         tm_p_file=stormy16/stormy16-protos.h
2609         md_file=stormy16/stormy16.md
2610         out_file=stormy16/stormy16.c
2611         extra_options=stormy16/stormy16.opt
2612         tmake_file="stormy16/t-stormy16"
2613         ;;
2614 xtensa*-*-elf*)
2615         tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h xtensa/elf.h"
2616         extra_options="${extra_options} xtensa/elf.opt"
2617         ;;
2618 xtensa*-*-linux*)
2619         tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h xtensa/linux.h"
2620         tmake_file="${tmake_file} xtensa/t-xtensa"
2621         ;;
2622 am33_2.0-*-linux*)
2623         tm_file="mn10300/mn10300.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h mn10300/linux.h"
2624         gas=yes gnu_ld=yes
2625         use_collect2=no
2626         ;;
2627 m32c-*-rtems*)
2628         tm_file="dbxelf.h elfos.h ${tm_file} m32c/rtems.h rtems.h newlib-stdint.h"
2629         tmake_file="${tmake_file} t-rtems"
2630         c_target_objs="m32c-pragma.o"
2631         cxx_target_objs="m32c-pragma.o"
2632         ;;
2633 m32c-*-elf*)
2634         tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
2635         c_target_objs="m32c-pragma.o"
2636         cxx_target_objs="m32c-pragma.o"
2637         ;;
2638 *)
2639         echo "*** Configuration ${target} not supported" 1>&2
2640         exit 1
2641         ;;
2642 esac
2643
2644 case ${target} in
2645 i[34567]86-*-linux* | x86_64-*-linux*)
2646         tmake_file="${tmake_file} i386/t-pmm_malloc i386/t-i386"
2647         ;;
2648 i[34567]86-*-* | x86_64-*-*)
2649         tmake_file="${tmake_file} i386/t-gmm_malloc i386/t-i386"
2650         ;;
2651 powerpc*-*-* | rs6000-*-*)
2652         tm_file="${tm_file} rs6000/option-defaults.h"
2653 esac
2654
2655 if [ "$target_has_targetcm" = "no" ]; then
2656   c_target_objs="$c_target_objs default-c.o"
2657   cxx_target_objs="$cxx_target_objs default-c.o"
2658 fi
2659
2660 if [ "$common_out_file" = "" ]; then
2661   if [ "$target_has_targetm_common" = "yes" ]; then
2662     common_out_file="$cpu_type/$cpu_type-common.c"
2663   else
2664     common_out_file="default-common.c"
2665   fi
2666 fi
2667
2668 # Support for --with-cpu and related options (and a few unrelated options,
2669 # too).
2670 case ${with_cpu} in
2671   yes | no)
2672     echo "--with-cpu must be passed a value" 1>&2
2673     exit 1
2674     ;;
2675 esac
2676
2677 # Set arch and cpu from ${target} and ${target_noncanonical}.  Set cpu
2678 # to generic if there is no processor scheduler model for the target.
2679 arch=
2680 cpu=
2681 arch_without_sse2=no
2682 arch_without_64bit=no
2683 case ${target} in
2684   i386-*-freebsd*)
2685     if test $fbsd_major -ge 6; then
2686       arch=i486
2687     else
2688       arch=i386
2689     fi
2690     cpu=generic
2691     arch_without_sse2=yes
2692     arch_without_64bit=yes
2693     ;;
2694   i386-*-*)
2695     arch=i386
2696     cpu=i386
2697     arch_without_sse2=yes
2698     arch_without_64bit=yes
2699     ;;
2700   i486-*-*)
2701     arch=i486
2702     cpu=i486
2703     arch_without_sse2=yes
2704     arch_without_64bit=yes
2705     ;;
2706   i586-*-*)
2707     arch_without_sse2=yes
2708     arch_without_64bit=yes
2709     case ${target_noncanonical} in
2710       k6_2-*)
2711         arch=k6-2
2712         cpu=k6-2
2713         ;;
2714       k6_3-*)
2715         arch=k6-3
2716         cpu=k6-3
2717         ;;
2718       k6-*)
2719         arch=k6
2720         cpu=k6
2721         ;;
2722       pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
2723         arch=pentium-mmx
2724         cpu=pentium-mmx
2725         ;;
2726       *)
2727         arch=pentium
2728         cpu=pentium
2729         ;;
2730     esac
2731     ;;
2732   i686-*-* | i786-*-*)
2733     case ${target_noncanonical} in
2734       bdver2-*)
2735         arch=bdver2
2736         cpu=bdver2
2737         ;;
2738       bdver1-*)
2739         arch=bdver1
2740         cpu=bdver1
2741         ;;
2742       btver1-*)
2743         arch=btver1
2744         cpu=btver1
2745         ;;
2746       amdfam10-*|barcelona-*)
2747         arch=amdfam10
2748         cpu=amdfam10
2749         ;;
2750       k8_sse3-*|opteron_sse3-*|athlon64_sse3-*)
2751         arch=k8-sse3
2752         cpu=k8-sse3
2753         ;;
2754       k8-*|opteron-*|athlon64-*|athlon_fx-*)
2755         arch=k8
2756         cpu=k8
2757         ;;
2758       athlon_xp-*|athlon_mp-*|athlon_4-*)
2759         arch=athlon-4
2760         cpu=athlon-4
2761         arch_without_sse2=yes
2762         arch_without_64bit=yes
2763         ;;
2764       athlon_tbird-*|athlon-*)
2765         arch=athlon
2766         cpu=athlon
2767         arch_without_sse2=yes
2768         ;;
2769       geode-*)
2770         arch=geode
2771         cpu=geode
2772         arch_without_sse2=yes
2773         ;;
2774       pentium2-*)
2775         arch=pentium2
2776         cpu=pentium2
2777         arch_without_sse2=yes
2778         ;;
2779       pentium3-*|pentium3m-*)
2780         arch=pentium3
2781         cpu=pentium3
2782         arch_without_sse2=yes
2783         ;;
2784       pentium4-*|pentium4m-*)
2785         arch=pentium4
2786         cpu=pentium4
2787         ;;
2788       prescott-*)
2789         arch=prescott
2790         cpu=prescott
2791         ;;
2792       nocona-*)
2793         arch=nocona
2794         cpu=nocona
2795         ;;
2796       atom-*)
2797         arch=atom
2798         cpu=atom
2799         ;;
2800       core2-*)
2801         arch=core2
2802         cpu=core2
2803         ;;
2804       corei7-*)
2805         arch=corei7
2806         cpu=corei7
2807         ;;
2808       corei7_avx-*)
2809         arch=corei7-avx
2810         cpu=corei7-avx
2811         ;;
2812       pentium_m-*)
2813         arch=pentium-m
2814         cpu=pentium-m
2815         ;;
2816       pentiumpro-*)
2817         arch=pentiumpro
2818         cpu=pentiumpro
2819         arch_without_sse2=yes
2820         ;;
2821       *)
2822         arch=pentiumpro
2823         cpu=generic
2824         arch_without_sse2=yes
2825         arch_without_64bit=yes
2826         ;;
2827     esac
2828     ;;
2829   x86_64-*-*)
2830     case ${target_noncanonical} in
2831       bdver2-*)
2832         arch=bdver2
2833         cpu=bdver2
2834         ;;
2835       bdver1-*)
2836         arch=bdver1
2837         cpu=bdver1
2838         ;;
2839       btver1-*)
2840         arch=btver1
2841         cpu=btver1
2842         ;;
2843       amdfam10-*|barcelona-*)
2844         arch=amdfam10
2845         cpu=amdfam10
2846         ;;
2847       k8_sse3-*|opteron_sse3-*|athlon64_sse3-*)
2848         arch=k8-sse3
2849         cpu=k8-sse3
2850         ;;
2851       k8-*|opteron-*|athlon_64-*)
2852         arch=k8
2853         cpu=k8
2854         ;;
2855       nocona-*)
2856         arch=nocona
2857         cpu=nocona
2858         ;;
2859       atom-*)
2860         arch=atom
2861         cpu=atom
2862         ;;
2863       core2-*)
2864         arch=core2
2865         cpu=core2
2866         ;;
2867       corei7-*)
2868         arch=corei7
2869         cpu=corei7
2870         ;;
2871       *)
2872         arch=x86-64
2873         cpu=generic
2874         ;;
2875     esac
2876     ;;
2877 esac
2878
2879 # If there is no $with_cpu option, try to infer one from ${target}.
2880 # This block sets nothing except for with_cpu.
2881 if test x$with_cpu = x ; then
2882   case ${target} in
2883     i[34567]86-*-*|x86_64-*-*)
2884       with_cpu=$cpu
2885       ;;
2886     alphaev6[78]*-*-*)
2887       with_cpu=ev67
2888       ;;
2889     alphaev6*-*-*)
2890       with_cpu=ev6
2891       ;;
2892     alphapca56*-*-*)
2893       with_cpu=pca56
2894       ;;
2895     alphaev56*-*-*)
2896       with_cpu=ev56
2897       ;;
2898     alphaev5*-*-*)
2899       with_cpu=ev5
2900       ;;
2901     frv-*-*linux* | frv400-*-*linux*)
2902       with_cpu=fr400
2903       ;;
2904     frv550-*-*linux*)
2905       with_cpu=fr550
2906       ;;
2907     m68k*-*-*)
2908       case "$with_arch" in
2909         "cf")
2910           with_cpu=${default_cf_cpu}
2911           ;;
2912         "" | "m68k")
2913           with_cpu=m${default_m68k_cpu}
2914           ;;
2915       esac
2916       ;;
2917     mips*-*-vxworks)
2918       with_arch=mips2
2919       ;;
2920     sparc-leon*-*)
2921       with_cpu=v8;
2922       ;;
2923     sparc*-*-*)
2924       with_cpu="`echo ${target} | sed 's/-.*$//'`"
2925       ;;
2926   esac
2927
2928   # Avoid overriding --with-cpu-32 and --with-cpu-64 values.
2929   case ${target} in
2930     i[34567]86-*-*|x86_64-*-*)
2931       if test x$with_cpu_32 != x || test x$with_cpu_64 != x; then
2932         if test x$with_cpu_32 = x; then
2933           with_cpu_32=$with_cpu
2934         fi
2935         if test x$with_cpu_64 = x; then
2936           with_cpu_64=$with_cpu
2937         fi
2938         with_cpu=
2939       fi
2940       ;;
2941   esac
2942 fi
2943
2944 # Support for --with-arch and related options (and a few unrelated options,
2945 # too).
2946 case ${with_arch} in
2947   yes | no)
2948     echo "--with-arch must be passed a value" 1>&2
2949     exit 1
2950     ;;
2951 esac
2952
2953 # If there is no $with_arch option, try to infer one from ${target}.
2954 # This block sets nothing except for with_arch.
2955 if test x$with_arch = x ; then
2956   case ${target} in
2957     i[34567]86-*-darwin*|x86_64-*-darwin*)
2958       # Default arch is set via TARGET_SUBTARGET32_ISA_DEFAULT
2959       # and TARGET_SUBTARGET64_ISA_DEFAULT in config/i386/darwin.h.
2960       ;;
2961     i[34567]86-*-*)
2962       # --with-fpmath sets the default ISA to SSE2, which is the same
2963       # ISA supported by Pentium 4.
2964       if test x$with_fpmath = x || test $arch_without_sse2 = no; then
2965         with_arch=$arch
2966       else
2967         with_arch=pentium4
2968       fi
2969       ;;
2970     x86_64-*-*)
2971       with_arch=$arch
2972       ;;
2973   esac
2974
2975   # Avoid overriding --with-arch-32 and --with-arch-64 values.
2976   case ${target} in
2977     i[34567]86-*-darwin*|x86_64-*-darwin*)
2978       # Default arch is set via TARGET_SUBTARGET32_ISA_DEFAULT
2979       # and TARGET_SUBTARGET64_ISA_DEFAULT in config/i386/darwin.h.
2980       ;;
2981     i[34567]86-*-*|x86_64-*-*)
2982       if test x$with_arch_32 != x || test x$with_arch_64 != x; then
2983         if test x$with_arch_32 = x; then
2984           with_arch_32=$with_arch
2985         fi
2986         if test x$with_arch_64 = x; then
2987           if test $arch_without_64bit = yes; then
2988             # Set the default 64bit arch to x86-64 if the default arch
2989             # doesn't support 64bit.
2990             with_arch_64=x86-64
2991           else
2992             with_arch_64=$with_arch
2993           fi
2994         fi
2995         with_arch=
2996       elif test $arch_without_64bit$need_64bit_isa = yesyes; then
2997         # Set the default 64bit arch to x86-64 if the default arch
2998         # doesn't support 64bit and we need 64bit ISA.
2999         with_arch_32=$with_arch
3000         with_arch_64=x86-64
3001         with_arch=
3002       fi
3003       ;;
3004   esac
3005 fi
3006
3007 # Support --with-fpmath.
3008 if test x$with_fpmath != x; then
3009   case ${target} in
3010     i[34567]86-*-* | x86_64-*-*)
3011       case ${with_fpmath} in
3012       avx)
3013         tm_file="${tm_file} i386/avxmath.h"
3014         ;;
3015       sse)
3016         tm_file="${tm_file} i386/ssemath.h"
3017         ;;
3018       *)
3019         echo "Invalid --with-fpmath=$with_fpmath" 1>&2
3020         exit 1
3021         ;;
3022       esac
3023       ;;
3024     *)
3025       echo "--with-fpmath isn't supported for $target." 1>&2
3026       exit 1
3027       ;;
3028   esac
3029 fi
3030
3031 # Similarly for --with-schedule.
3032 if test x$with_schedule = x; then
3033         case ${target} in
3034         hppa1*)
3035                 # Override default PA8000 scheduling model.
3036                 with_schedule=7100LC
3037                 ;;
3038         esac
3039 fi
3040
3041 # Validate and mark as valid any --with options supported
3042 # by this target.  In order to use a particular --with option
3043 # you must list it in supported_defaults; validating the value
3044 # is optional.  This case statement should set nothing besides
3045 # supported_defaults.
3046
3047 supported_defaults=
3048 case "${target}" in
3049         alpha*-*-*)
3050                 supported_defaults="cpu tune"
3051                 for which in cpu tune; do
3052                         eval "val=\$with_$which"
3053                         case "$val" in
3054                         "" \
3055                         | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \
3056                         | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \
3057                         | 21264a)
3058                                 ;;
3059                         *)
3060                                 echo "Unknown CPU used in --with-$which=$val" 1>&2
3061                                 exit 1
3062                                 ;;
3063                         esac
3064                 done
3065                 ;;
3066
3067         arm*-*-*)
3068                 supported_defaults="arch cpu float tune fpu abi mode tls"
3069                 for which in cpu tune; do
3070                         # See if it matches any of the entries in arm-cores.def
3071                         eval "val=\$with_$which"
3072                         if [ x"$val" = x ] \
3073                             || grep "^ARM_CORE(\"$val\"," \
3074                                     ${srcdir}/config/arm/arm-cores.def \
3075                                     > /dev/null; then
3076                           # Ok
3077                           new_val=`grep "^ARM_CORE(\"$val\"," \
3078                                 ${srcdir}/config/arm/arm-cores.def | \
3079                                 sed -e 's/^[^,]*,[      ]*//' | \
3080                                 sed -e 's/,.*$//'`
3081                           eval "target_${which}_cname=$new_val"
3082                         echo "For $val real value is $new_val"
3083                           true
3084                         else
3085                           echo "Unknown CPU used in --with-$which=$val" 1>&2
3086                           exit 1
3087                         fi
3088                 done
3089
3090                 case "$with_arch" in
3091                 "" \
3092                 | armv[23456] | armv2a | armv3m | armv4t | armv5t \
3093                 | armv5te | armv6j |armv6k | armv6z | armv6zk | armv6-m \
3094                 | armv7 | armv7-a | armv7-r | armv7-m \
3095                 | iwmmxt | ep9312)
3096                         # OK
3097                         ;;
3098                 *)
3099                         echo "Unknown arch used in --with-arch=$with_arch" 1>&2
3100                         exit 1
3101                         ;;
3102                 esac
3103
3104                 case "$with_float" in
3105                 "" \
3106                 | soft | hard | softfp)
3107                         # OK
3108                         ;;
3109                 *)
3110                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
3111                         exit 1
3112                         ;;
3113                 esac
3114
3115                 case "$with_fpu" in
3116                 "" \
3117                 | vfp | vfp3 | vfpv3 \
3118                 | vfpv3-fp16 | vfpv3-d16 | vfpv3-d16-fp16 | vfpv3xd \
3119                 | vfpv3xd-fp16 | neon | neon-fp16 | vfpv4 | vfpv4-d16 \
3120                 | fpv4-sp-d16 | neon-vfpv4)
3121                         # OK
3122                         ;;
3123                 fpa | fpe2 | fpe3 | maverick)
3124                         if test "x$enable_obsolete" != xyes; then
3125                             echo "*** Configuration option --with-fpu=${with_fpu} is obsolete." >&2
3126                             echo "*** Specify --enable-obsolete to build it anyway." >&2
3127                             echo "*** Support will be REMOVED in the next major release of GCC." >&2
3128                             exit 1
3129                         fi
3130                         ;;
3131                 *)
3132                         echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1
3133                         exit 1
3134                         ;;
3135                 esac
3136
3137                 case "$with_abi" in
3138                 "" \
3139                 | apcs-gnu | atpcs | aapcs | iwmmxt | aapcs-linux )
3140                         #OK
3141                         ;;
3142                 *)
3143                         echo "Unknown ABI used in --with-abi=$with_abi"
3144                         exit 1
3145                         ;;
3146                 esac
3147
3148                 case "$with_mode" in
3149                 "" \
3150                 | arm | thumb )
3151                         #OK
3152                         ;;
3153                 *)
3154                         echo "Unknown mode used in --with-mode=$with_mode"
3155                         exit 1
3156                         ;;
3157                 esac
3158
3159                 case "$with_tls" in
3160                 "" \
3161                 | gnu | gnu2)
3162                         # OK
3163                         ;;
3164                 *)
3165                         echo "Unknown TLS method used in --with-tls=$with_tls" 1>&2
3166                         exit 1
3167                         ;;
3168                 esac
3169
3170                 if test "x$with_arch" != x && test "x$with_cpu" != x; then
3171                         echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2
3172                 fi
3173                 ;;
3174
3175         fr*-*-*linux*)
3176                 supported_defaults=cpu
3177                 case "$with_cpu" in
3178                 fr400) ;;
3179                 fr550) ;;
3180                 *)
3181                         echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
3182                         exit 1
3183                         ;;
3184                 esac
3185                 ;;
3186
3187         fido-*-* | m68k*-*-*)
3188                 supported_defaults="arch cpu"
3189                 case "$with_arch" in
3190                 "" | "m68k"| "cf")
3191                         m68k_arch_family="$with_arch"
3192                         ;;
3193                 *)
3194                         echo "Invalid --with-arch=$with_arch" 1>&2
3195                         exit 1
3196                         ;;
3197                 esac
3198
3199                 # We always have a $with_cpu setting here.
3200                 case "$with_cpu" in
3201                 "m68000" | "m68010" | "m68020" | "m68030" | "m68040" | "m68060")
3202                         m68k_cpu_ident=$with_cpu
3203                         ;;
3204                 "m68020-40")
3205                         m68k_cpu_ident=m68020
3206                         tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_40"
3207                         ;;
3208                 "m68020-60")
3209                         m68k_cpu_ident=m68020
3210                         tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_60"
3211                         ;;
3212                 *)
3213                         # We need the C identifier rather than the string.
3214                         m68k_cpu_ident=`awk -v arg="\"$with_cpu\"" \
3215                            'BEGIN { FS="[ \t]*[,()][ \t]*" }; \
3216                             $1 == "M68K_DEVICE" && $2 == arg { print $3 }' \
3217                                  ${srcdir}/config/m68k/m68k-devices.def`
3218                         if [ x"$m68k_cpu_ident" = x ] ; then
3219                                 echo "Unknown CPU used in --with-cpu=$with_cpu" 1>&2
3220                                 exit 1
3221                         fi
3222                         with_cpu="mcpu=$with_cpu"
3223                         ;;
3224                 esac
3225                 ;;
3226
3227         hppa*-*-*)
3228                 supported_defaults="arch schedule"
3229
3230                 case "$with_arch" in
3231                 "" | 1.0 | 1.1 | 2.0)
3232                         # OK
3233                         ;;
3234                 *)
3235                         echo "Unknown architecture used in --with-arch=$with_arch" 1>&2
3236                         exit 1
3237                         ;;
3238                 esac
3239
3240                 case "$with_schedule" in
3241                 "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000)
3242                         # OK
3243                         ;;
3244                 *)
3245                         echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2
3246                         exit 1
3247                         ;;
3248                 esac
3249                 ;;
3250
3251         i[34567]86-*-* | x86_64-*-*)
3252                 supported_defaults="arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64"
3253                 for which in arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64; do
3254                         eval "val=\$with_$which"
3255                         case ${val} in
3256                         i386 | i486 \
3257                         | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \
3258                         | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
3259                         | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
3260                         | athlon-4 | athlon-xp | athlon-mp | geode \
3261                         | prescott | pentium-m | pentium4m | pentium3m)
3262                                 case "${target}" in
3263                                   x86_64-*-*)
3264                                       case "x$which" in
3265                                         *_32)
3266                                                 ;;
3267                                         *)
3268                                                 echo "CPU given in --with-$which=$val doesn't support 64bit mode." 1>&2
3269                                                 exit 1
3270                                                 ;;
3271                                       esac
3272                                       ;;
3273                                 esac
3274                                 # OK
3275                                 ;;
3276                         "" | x86-64 | generic | native \
3277                         | k8 | k8-sse3 | athlon64 | athlon64-sse3 | opteron \
3278                         | opteron-sse3 | athlon-fx | bdver2 | bdver1 | btver1 \
3279                         | amdfam10 | barcelona | nocona | core2 | corei7 \
3280                         | corei7-avx | core-avx-i | core-avx2 | atom)
3281                                 # OK
3282                                 ;;
3283                         *)
3284                                 echo "Unknown CPU given in --with-$which=$val." 1>&2
3285                                 exit 1
3286                                 ;;
3287                         esac
3288                 done
3289                 ;;
3290
3291         mips*-*-*)
3292                 supported_defaults="abi arch arch_32 arch_64 float tune tune_32 tune_64 divide llsc mips-plt synci"
3293
3294                 case ${with_float} in
3295                 "" | soft | hard)
3296                         # OK
3297                         ;;
3298                 *)
3299                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
3300                         exit 1
3301                         ;;
3302                 esac
3303
3304                 case ${with_abi} in
3305                 "" | 32 | o64 | n32 | 64 | eabi)
3306                         # OK
3307                         ;;
3308                 *)
3309                         echo "Unknown ABI used in --with-abi=$with_abi" 1>&2
3310                         exit 1
3311                         ;;
3312                 esac
3313
3314                 case ${with_divide} in
3315                 "" | breaks | traps)
3316                         # OK
3317                         ;;
3318                 *)
3319                         echo "Unknown division check type use in --with-divide=$with_divide" 1>&2
3320                         exit 1
3321                         ;;
3322                 esac
3323
3324                 case ${with_llsc} in
3325                 yes)
3326                         with_llsc=llsc
3327                         ;;
3328                 no)
3329                         with_llsc="no-llsc"
3330                         ;;
3331                 "")
3332                         # OK
3333                         ;;
3334                 *)
3335                         echo "Unknown llsc type used in --with-llsc" 1>&2
3336                         exit 1
3337                         ;;
3338                 esac
3339
3340                 case ${with_mips_plt} in
3341                 yes)
3342                         with_mips_plt=plt
3343                         ;;
3344                 no)
3345                         with_mips_plt=no-plt
3346                         ;;
3347                 "")
3348                         ;;
3349                 *)
3350                         echo "Unknown --with-mips-plt argument: $with_mips_plt" 1>&2
3351                         exit 1
3352                         ;;
3353                 esac
3354
3355                 case ${with_synci} in
3356                 yes)
3357                         with_synci=synci
3358                         ;;
3359                 "" | no)
3360                         # No is the default.
3361                         with_synci=no-synci
3362                         ;;
3363                 *)
3364                         echo "Unknown synci type used in --with-synci" 1>&2
3365                         exit 1
3366                         ;;
3367                 esac
3368                 ;;
3369
3370         powerpc*-*-* | rs6000-*-*)
3371                 supported_defaults="cpu cpu_32 cpu_64 float tune tune_32 tune_64"
3372
3373                 for which in cpu cpu_32 cpu_64 tune tune_32 tune_64; do
3374                         eval "val=\$with_$which"
3375                         case ${val} in
3376                         default32 | default64)
3377                                 case $which in
3378                                 cpu | tune)
3379                                         ;;
3380                                 *)
3381                                         echo "$val only valid for --with-cpu and --with-tune." 1>&2
3382                                         exit 1
3383                                         ;;
3384                                 esac
3385                                 with_which="with_$which"
3386                                 eval $with_which=
3387                                 ;;
3388                         405cr)
3389                                 tm_defines="${tm_defines} CONFIG_PPC405CR"
3390                                 eval "with_$which=405"
3391                                 ;;
3392                         "" | common \
3393                         | power | power[234567] | power6x | powerpc | powerpc64 \
3394                         | rios | rios1 | rios2 | rsc | rsc1 | rs64a \
3395                         | 401 | 403 | 405 | 405fp | 440 | 440fp | 464 | 464fp \
3396                         | 476 | 476fp | 505 | 601 | 602 | 603 | 603e | ec603e \
3397                         | 604 | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
3398                         | a2 | e300c[23] | 854[08] | e500mc | e500mc64 | titan\
3399                         | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5 | cell)
3400                                 # OK
3401                                 ;;
3402                         *)
3403                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
3404                                 exit 1
3405                                 ;;
3406                         esac
3407                 done
3408                 ;;
3409
3410         s390*-*-*)
3411                 supported_defaults="arch mode tune"
3412
3413                 for which in arch tune; do
3414                         eval "val=\$with_$which"
3415                         case ${val} in
3416                         "" | g5 | g6 | z900 | z990 | z9-109 | z9-ec | z10 | z196)
3417                                 # OK
3418                                 ;;
3419                         *)
3420                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
3421                                 exit 1
3422                                 ;;
3423                         esac
3424                 done
3425
3426                 case ${with_mode} in
3427                 "" | esa | zarch)
3428                         # OK
3429                         ;;
3430                 *)
3431                         echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2
3432                         exit 1
3433                         ;;
3434                 esac
3435                 ;;
3436
3437         sh[123456ble]-*-* | sh-*-*)
3438                 supported_defaults="cpu"
3439                 case "`echo $with_cpu | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz- | sed s/sh/m/`" in
3440                 "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu )
3441                         # OK
3442                         ;;
3443                 m2a | m2a-single | m2a-single-only | m2a-nofpu)
3444                         ;;
3445                 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al)
3446                         ;;
3447                 *)
3448                         echo "Unknown CPU used in --with-cpu=$with_cpu, known values:"  1>&2
3449                         echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2
3450                         echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2
3451                         echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2
3452                         exit 1
3453                         ;;
3454                 esac
3455                 ;;
3456         sparc*-*-*)
3457                 supported_defaults="cpu float tune"
3458
3459                 for which in cpu tune; do
3460                         eval "val=\$with_$which"
3461                         case ${val} in
3462                         "" | sparc | sparcv9 | sparc64 \
3463                         | v7 | cypress \
3464                         | v8 | supersparc | hypersparc | leon \
3465                         | sparclite | f930 | f934 | sparclite86x \
3466                         | sparclet | tsc701 \
3467                         | v9 | ultrasparc | ultrasparc3 | niagara | niagara2 \
3468                         | niagara3 | niagara4)
3469                                 # OK
3470                                 ;;
3471                         *)
3472                                 echo "Unknown cpu used in --with-$which=$val" 1>&2
3473                                 exit 1
3474                                 ;;
3475                         esac
3476                 done
3477
3478                 case ${with_float} in
3479                 "" | soft | hard)
3480                         # OK
3481                         ;;
3482                 *)
3483                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
3484                         exit 1
3485                         ;;
3486                 esac
3487                 ;;
3488
3489         spu-*-*)
3490                 supported_defaults="arch tune"
3491
3492                 for which in arch tune; do
3493                         eval "val=\$with_$which"
3494                         case ${val} in
3495                         "" | cell | celledp)
3496                                 # OK
3497                                 ;;
3498                         *)
3499                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
3500                                 exit 1
3501                                 ;;
3502                         esac
3503                 done
3504                 ;;
3505
3506         tic6x-*-*)
3507                 supported_defaults="arch"
3508
3509                 case ${with_arch} in
3510                 "" | c62x | c64x | c64x+ | c67x | c67x+ | c674x)
3511                         # OK
3512                         ;;
3513                 *)
3514                         echo "Unknown arch used in --with-arch=$with_arch." 1>&2
3515                         exit 1
3516                         ;;
3517                 esac
3518                 ;;
3519
3520         v850*-*-*)
3521                 supported_defaults=cpu
3522                 case ${with_cpu} in
3523                 "" | v850e | v850e1 | v850e2 | v850es | v850e2v3)
3524                         # OK
3525                         ;;
3526                 *)
3527                         echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
3528                         exit 1
3529                         ;;
3530                 esac
3531                 ;;
3532 esac
3533
3534 # Set some miscellaneous flags for particular targets.
3535 target_cpu_default2=
3536 case ${target} in
3537         alpha*-*-*)
3538                 if test x$gas = xyes
3539                 then
3540                         target_cpu_default2="MASK_GAS"
3541                 fi
3542                 ;;
3543
3544         arm*-*-*)
3545                 if test x$target_cpu_cname = x
3546                 then
3547                         target_cpu_default2=TARGET_CPU_generic
3548                 else
3549                         target_cpu_default2=TARGET_CPU_$target_cpu_cname
3550                 fi
3551                 ;;
3552
3553         hppa*-*-*)
3554                 target_cpu_default2="MASK_BIG_SWITCH"
3555                 if test x$gas = xyes
3556                 then
3557                         target_cpu_default2="${target_cpu_default2}|MASK_GAS|MASK_JUMP_IN_DELAY"
3558                 fi
3559                 ;;
3560
3561         fido*-*-* | m68k*-*-*)
3562                 target_cpu_default2=$m68k_cpu_ident
3563                 tmake_file="m68k/t-opts $tmake_file"
3564                 if [ x"$m68k_arch_family" != x ]; then
3565                         tmake_file="m68k/t-$m68k_arch_family $tmake_file"
3566                 fi
3567                 ;;
3568
3569         i[34567]86-*-darwin* | x86_64-*-darwin*)
3570                 ;;
3571         i[34567]86-*-linux* | x86_64-*-linux*)
3572                 tmake_file="$tmake_file i386/t-linux"
3573                 ;;
3574         i[34567]86-*-kfreebsd*-gnu | x86_64-*-kfreebsd*-gnu)
3575                 tmake_file="$tmake_file i386/t-kfreebsd"
3576                 ;;
3577         i[34567]86-*-gnu*)
3578                 tmake_file="$tmake_file i386/t-gnu"
3579                 ;;
3580         i[34567]86-*-solaris2* | x86_64-*-solaris2.1[0-9]*)
3581                 ;;
3582         i[34567]86-*-cygwin* | i[34567]86-*-mingw* | x86_64-*-mingw*)
3583                 ;;
3584         i[34567]86-*-freebsd* | x86_64-*-freebsd*)
3585                 ;;
3586         ia64*-*-linux*)
3587                 ;;
3588
3589         mips*-*-*)
3590                 if test x$gnu_ld = xyes
3591                 then
3592                         target_cpu_default2="MASK_SPLIT_ADDRESSES"
3593                 fi
3594                 case ${target} in
3595                         mips*el-*-*)
3596                                 tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
3597                                 ;;
3598                 esac
3599                 tmake_file="mips/t-mips $tmake_file"
3600                 ;;
3601
3602         powerpc*-*-* | rs6000-*-*)
3603                 # FIXME: The PowerPC port uses the value set at compile time,
3604                 # although it's only cosmetic.
3605                 if test "x$with_cpu" != x
3606                 then
3607                         target_cpu_default2="\\\"$with_cpu\\\""
3608                 fi
3609                 out_file=rs6000/rs6000.c
3610                 c_target_objs="${c_target_objs} rs6000-c.o"
3611                 cxx_target_objs="${cxx_target_objs} rs6000-c.o"
3612                 tmake_file="rs6000/t-rs6000 ${tmake_file}"
3613
3614                 if test x$enable_e500_double = xyes
3615                 then
3616                         tm_file="$tm_file rs6000/e500-double.h"
3617                 fi
3618                 ;;
3619
3620         sh[123456ble]*-*-* | sh-*-*)
3621                 c_target_objs="${c_target_objs} sh-c.o"
3622                 cxx_target_objs="${cxx_target_objs} sh-c.o"
3623                 ;;
3624
3625         sparc-leon*-*)
3626                 if test x$with_tune = x ; then
3627                   with_tune=leon;
3628                 fi
3629
3630                 # The SPARC port checks this value at compile-time.
3631                 target_cpu_default2="TARGET_CPU_$with_cpu"
3632                 ;;
3633
3634         sparc*-*-*)
3635                 # Some standard aliases.
3636                 case x$with_cpu in
3637                 xsparc)
3638                         with_cpu=v7
3639                         ;;
3640                 xsparcv9 | xsparc64)
3641                         with_cpu=v9
3642                         ;;
3643                 esac
3644
3645                 # The SPARC port checks this value at compile-time.
3646                 target_cpu_default2="TARGET_CPU_$with_cpu"
3647                 ;;
3648
3649         v850*-*-*)
3650                 case "x$with_cpu" in
3651                 x)
3652                         ;;
3653                 xv850e | xv850e1 | xv850e2 | xv850e2v3)
3654                         target_cpu_default2="TARGET_CPU_$with_cpu"
3655                         ;;
3656                 xv850es)
3657                         target_cpu_default2="TARGET_CPU_v850e1"
3658                         ;;
3659                 esac
3660                 ;;
3661 esac
3662
3663 t=
3664 all_defaults="abi cpu cpu_32 cpu_64 arch arch_32 arch_64 tune tune_32 tune_64 schedule float mode fpu divide llsc mips-plt synci tls"
3665 for option in $all_defaults
3666 do
3667         eval "val=\$with_"`echo $option | sed s/-/_/g`
3668         if test -n "$val"; then
3669                 case " $supported_defaults " in
3670                 *" $option "*)
3671                         ;;
3672                 *)
3673                         echo "This target does not support --with-$option." 2>&1
3674                         echo "Valid --with options are: $supported_defaults" 2>&1
3675                         exit 1
3676                         ;;
3677                 esac
3678
3679                 if test "x$t" = x
3680                 then
3681                         t="{ \"$option\", \"$val\" }"
3682                 else
3683                         t="${t}, { \"$option\", \"$val\" }"
3684                 fi
3685         fi
3686 done
3687
3688 if test "x$t" = x
3689 then
3690         configure_default_options="{ { NULL, NULL} }"
3691 else
3692         configure_default_options="{ ${t} }"
3693 fi
3694
3695 if test "$target_cpu_default2" != ""
3696 then
3697         if test "$target_cpu_default" != ""
3698         then
3699                 target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
3700         else
3701                 target_cpu_default=$target_cpu_default2
3702         fi
3703 fi