gcc/config.gcc

   1 # GCC target-specific configuration file.
   2 # Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
   3 # 2008 Free Software Foundation, Inc.
   4
   5 #This file is part of GCC.
   6
   7 #GCC is free software; you can redistribute it and/or modify it under
   8 #the terms of the GNU General Public License as published by the Free
   9 #Software Foundation; either version 3, or (at your option) any later
  10 #version.
  11
  12 #GCC is distributed in the hope that it will be useful, but WITHOUT
  13 #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  14 #FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  15 #for more details.
  16
  17 #You should have received a copy of the GNU General Public License
  18 #along with GCC; see the file COPYING3.  If not see
  19 #<http://www.gnu.org/licenses/>.
  20
  21 # This is the GCC target-specific configuration file
  22 # where a configuration type is mapped to different system-specific
  23 # definitions and files.  This is invoked by the autoconf-generated
  24 # configure script.  Putting it in a separate shell file lets us skip
  25 # running autoconf when modifying target-specific information.
  26
  27 # When you change the cases in the OS or target switches, consider
  28 # updating ../libgcc/config.host also.
  29
  30 # This file switches on the shell variable ${target}, and also uses the
  31 # following shell variables:
  32 #
  33 #  with_*               Various variables as set by configure.
  34 #
  35 #  enable_threads       Either the name, yes or no depending on whether
  36 #                       threads support was requested.
  37 #
  38 #  default_use_cxa_atexit
  39 #                         The default value for the $enable___cxa_atexit
  40 #                       variable.  enable___cxa_atexit needs to be set to
  41 #                       "yes" for the correct operation of C++ destructors
  42 #                       but it relies upon the presence of a non-standard C
  43 #                       library function called __cxa_atexit.
  44 #                         Since not all C libraries provide __cxa_atexit the
  45 #                       default value of $default_use_cxa_atexit is set to
  46 #                       "no" except for targets which are known to be OK.
  47 #
  48 #  gas_flag             Either yes or no depending on whether GNU as was
  49 #                       requested.
  50 #
  51 #  gnu_ld_flag          Either yes or no depending on whether GNU ld was
  52 #                       requested.
  53
  54 # This file sets the following shell variables for use by the
  55 # autoconf-generated configure script:
  56 #
  57 #  cpu_type             The name of the cpu, if different from the first
  58 #                       chunk of the canonical target name.
  59 #
  60 #  tm_defines           List of target macros to define for all compilations.
  61 #
  62 #  tm_file              A list of target macro files, if different from
  63 #                       "$cpu_type/$cpu_type.h". Usually it's constructed
  64 #                       per target in a way like this:
  65 #                       tm_file="${tm_file} dbxelf.h elfos.h svr4.h ${cpu_type.h}/elf.h"
  66 #                       Note that the preferred order is:
  67 #                       - specific target header "${cpu_type}/${cpu_type.h}"
  68 #                       - generic headers like dbxelf.h elfos.h, etc.
  69 #                       - specializing target headers like ${cpu_type.h}/elf.h
  70 #                       This helps to keep OS specific stuff out of the CPU
  71 #                       defining header ${cpu_type}/${cpu_type.h}.
  72 #
  73 #                       It is possible to include automatically-generated
  74 #                       build-directory files by prefixing them with "./".
  75 #                       All other files should relative to $srcdir/config.
  76 #
  77 #  tm_p_file            Location of file with declarations for functions
  78 #                       in $out_file.
  79 #
  80 #  out_file             The name of the machine description C support
  81 #                       file, if different from "$cpu_type/$cpu_type.c".
  82 #
  83 #  md_file              The name of the machine-description file, if
  84 #                       different from "$cpu_type/$cpu_type.md".
  85 #
  86 #  tmake_file           A list of machine-description-specific
  87 #                       makefile-fragments, if different from
  88 #                       "$cpu_type/t-$cpu_type".
  89 #
  90 #  extra_modes          The name of the file containing a list of extra
  91 #                       machine modes, if necessary and different from
  92 #                       "$cpu_type/$cpu_type-modes.def".
  93 #
  94 #  extra_objs           List of extra objects that should be linked into
  95 #                       the compiler proper (cc1, cc1obj, cc1plus)
  96 #                       depending on target.
  97 #
  98 #  extra_gcc_objs       List of extra objects that should be linked into
  99 #                       the compiler driver (gcc) depending on target.
 100 #
 101 #  extra_headers        List of used header files from the directory
 102 #                       config/${cpu_type}.
 103 #
 104 #  use_gcc_tgmath       If set, add tgmath.h to the list of used header
 105 #                       files.
 106 #
 107 #  extra_passes         List of extra executables compiled for this target
 108 #                       machine, used for compiling from source to object.
 109 #
 110 #  extra_parts          List of extra object files that should be compiled
 111 #                       for this target machine.
 112 #
 113 #  extra_programs       Like extra_passes, but these are used when linking.
 114 #
 115 #  extra_options        List of target-dependent .opt files.
 116 #
 117 #  c_target_objs        List of extra target-dependent objects that be
 118 #                       linked into the C compiler only.
 119 #
 120 #  cxx_target_objs      List of extra target-dependent objects that be
 121 #                       linked into the C++ compiler only.
 122 #
 123 #  fortran_target_objs  List of extra target-dependent objects that be
 124 #                       linked into the fortran compiler only.
 125 #
 126 #  target_gtfiles       List of extra source files with type information.
 127 #
 128 #  xm_defines           List of macros to define when compiling for the
 129 #                       target machine.
 130 #
 131 #  xm_file              List of files to include when compiling for the
 132 #                       target machine.
 133 #
 134 #  use_collect2         Set to yes or no, depending on whether collect2
 135 #                       will be used.
 136 #
 137 #  target_cpu_default   Set to override the default target model.
 138 #
 139 #  gdb_needs_out_file_path
 140 #                       Set to yes if gdb needs a dir command with
 141 #                       `dirname $out_file`.
 142 #
 143 #  thread_file          Set to control which thread package to use.
 144 #
 145 #  gas                  Set to yes or no depending on whether the target
 146 #                       system normally uses GNU as.
 147 #
 148 #  need_64bit_hwint     Set to yes if HOST_WIDE_INT must be 64 bits wide
 149 #                       for this target.  This is true iff this target
 150 #                       supports "long" or "wchar_t" wider than 32 bits.
 151 #                       The setting made here must match the one made in
 152 #                       other locations such as libcpp/configure.ac
 153 #
 154 #  configure_default_options
 155 #                       Set to an initializer for configure_default_options
 156 #                       in configargs.h, based on --with-cpu et cetera.
 157 #
 158 #  use_fixproto         Set to "yes" if fixproto should be run normally,
 159 #                       "no" if fixproto should never be run.
 160
 161 # The following variables are used in each case-construct to build up the
 162 # outgoing variables:
 163 #
 164 #  gnu_ld               Set to yes or no depending on whether the target
 165 #                       system normally uses GNU ld.
 166
 167 out_file=
 168 tmake_file=
 169 extra_headers=
 170 use_gcc_tgmath=yes
 171 extra_passes=
 172 extra_parts=
 173 extra_programs=
 174 extra_objs=
 175 extra_gcc_objs=
 176 extra_options=
 177 c_target_objs=
 178 cxx_target_objs=
 179 fortran_target_objs=
 180 tm_defines=
 181 xm_defines=
 182 # Set this to force installation and use of collect2.
 183 use_collect2=
 184 # Set this to override the default target model.
 185 target_cpu_default=
 186 # Set this if gdb needs a dir command with `dirname $out_file`
 187 gdb_needs_out_file_path=
 188 # Set this to control which thread package will be used.
 189 thread_file=
 190 # Reinitialize these from the flag values every loop pass, since some
 191 # configure entries modify them.
 192 gas="$gas_flag"
 193 gnu_ld="$gnu_ld_flag"
 194 default_use_cxa_atexit=no
 195 target_gtfiles=
 196 need_64bit_hwint=
 197
 198 # Default to not using fixproto.  Targets which need fixproto should
 199 # specifically set this to 'yes'.
 200 use_fixproto=no
 201
 202 # Don't carry these over build->host->target.  Please.
 203 xm_file=
 204 md_file=
 205
 206 # Obsolete configurations.
 207 #case ${target} in
 208 # )
 209 #    if test "x$enable_obsolete" != xyes; then
 210 #      echo "*** Configuration ${target} is obsolete." >&2
 211 #      echo "*** Specify --enable-obsolete to build it anyway." >&2
 212 #      echo "*** Support will be REMOVED in the next major release of GCC," >&2
 213 #      echo "*** unless a maintainer comes forward." >&2
 214 #      exit 1
 215 #    fi;;
 216 #esac
 217
 218 # Unsupported targets list.  Do not put an entry in this list unless
 219 # it would otherwise be caught by a more permissive pattern.  The list
 220 # should be in alphabetical order.
 221 case ${target} in
 222    i[34567]86-go32-*                    \
 223  | i[34567]86-*-go32*                   \
 224  | mips64orion*-*-rtems*                \
 225  | sparc-hal-solaris2*                  \
 226  | thumb-*-*                            \
 227  | *-*-linux*aout*                      \
 228  | *-*-linux*coff*                      \
 229  | *-*-linux*libc1*                     \
 230  | *-*-linux*oldld*                     \
 231  | *-*-rtemsaout*                       \
 232  | *-*-rtemscoff*                       \
 233  | *-*-solaris2.[0-6]                   \
 234  | *-*-solaris2.[0-6].*                 \
 235  | *-*-sysv*            \
 236  | vax-*-vms*                           \
 237  )
 238         echo "*** Configuration ${target} not supported" 1>&2
 239         exit 1
 240         ;;
 241 esac
 242
 243 # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
 244 # updated in each machine entry.  Also set default extra_headers for some
 245 # machines.
 246 tm_p_file=
 247 cpu_type=`echo ${target} | sed 's/-.*$//'`
 248 cpu_is_64bit=
 249 case ${target} in
 250 m32c*-*-*)
 251         cpu_type=m32c
 252         tmake_file=m32c/t-m32c
 253         ;;
 254 alpha*-*-*)
 255         cpu_type=alpha
 256         need_64bit_hwint=yes
 257         ;;
 258 am33_2.0-*-linux*)
 259         cpu_type=mn10300
 260         ;;
 261 arm*-*-*)
 262         cpu_type=arm
 263         extra_headers="mmintrin.h arm_neon.h"
 264         c_target_objs="arm-c.o"
 265         cxx_target_objs="arm-c.o"
 266         ;;
 267 bfin*-*)
 268         cpu_type=bfin
 269         ;;
 270 crisv32-*)
 271         cpu_type=cris
 272         ;;
 273 frv*)   cpu_type=frv
 274         ;;
 275 fido-*-*)
 276         cpu_type=m68k
 277         extra_headers=math-68881.h
 278         ;;
 279 i[34567]86-*-*)
 280         cpu_type=i386
 281         extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
 282                        pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
 283                        nmmintrin.h bmmintrin.h mmintrin-common.h
 284                        wmmintrin.h"
 285         ;;
 286 x86_64-*-*)
 287         cpu_type=i386
 288         extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
 289                        pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
 290                        nmmintrin.h bmmintrin.h mmintrin-common.h
 291                        wmmintrin.h"
 292         need_64bit_hwint=yes
 293         ;;
 294 ia64-*-*)
 295         extra_headers=ia64intrin.h
 296         need_64bit_hwint=yes
 297         ;;
 298 hppa*-*-*)
 299         cpu_type=pa
 300         ;;
 301 m32r*-*-*)
 302         cpu_type=m32r
 303         ;;
 304 m68k-*-*)
 305         extra_headers=math-68881.h
 306         ;;
 307 mips*-*-*)
 308         cpu_type=mips
 309         need_64bit_hwint=yes
 310         extra_headers="loongson.h"
 311         ;;
 312 powerpc*-*-*)
 313         cpu_type=rs6000
 314         extra_headers="ppc-asm.h altivec.h spe.h ppu_intrinsics.h paired.h spu2vmx.h vec_types.h si2vmx.h"
 315         need_64bit_hwint=yes
 316         case x$with_cpu in
 317             xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[3456]|xpower6x|xrs64a|xcell)
 318                 cpu_is_64bit=yes
 319                 ;;
 320         esac
 321         ;;
 322 rs6000*-*-*)
 323         need_64bit_hwint=yes
 324         ;;
 325 score*-*-*)
 326         cpu_type=score
 327         ;;
 328 sparc*-*-*)
 329         cpu_type=sparc
 330         need_64bit_hwint=yes
 331         ;;
 332 spu*-*-*)
 333         cpu_type=spu
 334         need_64bit_hwint=yes
 335         ;;
 336 s390*-*-*)
 337         cpu_type=s390
 338         need_64bit_hwint=yes
 339         ;;
 340 # Note the 'l'; we need to be able to match e.g. "shle" or "shl".
 341 sh[123456789lbe]*-*-* | sh-*-*)
 342         cpu_type=sh
 343         need_64bit_hwint=yes
 344         ;;
 345 esac
 346
 347 tm_file=${cpu_type}/${cpu_type}.h
 348 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
 349 then
 350         tm_p_file=${cpu_type}/${cpu_type}-protos.h
 351 fi
 352 extra_modes=
 353 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
 354 then
 355         extra_modes=${cpu_type}/${cpu_type}-modes.def
 356 fi
 357 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt
 358 then
 359         extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt"
 360 fi
 361
 362 case ${target} in
 363 i[34567]86-*-*)
 364         if test "x$enable_cld" = xyes; then
 365                 tm_defines="${tm_defines} USE_IX86_CLD=1"
 366         fi
 367         ;;
 368 x86_64-*-*)
 369         tm_file="i386/biarch64.h ${tm_file}"
 370         if test "x$enable_cld" = xyes; then
 371                 tm_defines="${tm_defines} USE_IX86_CLD=1"
 372         fi
 373         ;;
 374 esac
 375
 376 # On a.out targets, we need to use collect2.
 377 case ${target} in
 378 *-*-*aout*)
 379         use_collect2=yes
 380         ;;
 381 esac
 382
 383 # Common parts for widely ported systems.
 384 case ${target} in
 385 *-*-darwin*)
 386   tm_file="${tm_file} darwin.h"
 387   case ${target} in
 388   *-*-darwin9*)
 389     tm_file="${tm_file} darwin9.h"
 390     ;;
 391   esac
 392   tm_file="${tm_file} ${cpu_type}/darwin.h"
 393   tm_p_file="${tm_p_file} darwin-protos.h"
 394   tmake_file="t-darwin ${cpu_type}/t-darwin t-slibgcc-darwin"
 395   target_gtfiles="\$(srcdir)/config/darwin.c"
 396   extra_options="${extra_options} darwin.opt"
 397   c_target_objs="darwin-c.o"
 398   cxx_target_objs="darwin-c.o"
 399   fortran_target_objs="darwin-f.o"
 400   extra_objs="darwin.o"
 401   extra_gcc_objs="darwin-driver.o"
 402   default_use_cxa_atexit=yes
 403   case ${enable_threads} in
 404     "" | yes | posix) thread_file='posix' ;;
 405   esac
 406   ;;
 407 *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
 408   # This is the place-holder for the generic a.out configuration
 409   # of FreeBSD.  No actual configuration resides here since
 410   # there was only ever a bare-bones ix86 configuration for
 411   # a.out and it exists solely in the machine-specific section.
 412   # This place-holder must exist to avoid dropping into
 413   # the generic ELF configuration of FreeBSD (i.e. it must be
 414   # ordered before that section).
 415   ;;
 416 *-*-freebsd*)
 417   # This is the generic ELF configuration of FreeBSD.  Later
 418   # machine-specific sections may refine and add to this
 419   # configuration.
 420   #
 421   # Due to tm_file entry ordering issues that vary between cpu
 422   # architectures, we only define fbsd_tm_file to allow the
 423   # machine-specific section to dictate the final order of all
 424   # entries of tm_file with the minor exception that components
 425   # of the tm_file set here will always be of the form:
 426   #
 427   # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
 428   #
 429   # The machine-specific section should not tamper with this
 430   # ordering but may order all other entries of tm_file as it
 431   # pleases around the provided core setting.
 432   gas=yes
 433   gnu_ld=yes
 434   extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
 435   fbsd_major=`echo ${target} | sed -e 's/.*freebsd//g' | sed -e 's/\..*//g'`
 436   tm_defines="${tm_defines} FBSD_MAJOR=${fbsd_major}"
 437   tmake_file="t-slibgcc-elf-ver t-freebsd"
 438   case ${enable_threads} in
 439     no)
 440       fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
 441       ;;
 442     "" | yes | posix)
 443       thread_file='posix'
 444       tmake_file="${tmake_file} t-freebsd-thread"
 445       # Before 5.0, FreeBSD can't bind shared libraries to -lc
 446       # when "optionally" threaded via weak pthread_* checks.
 447       case ${target} in
 448         *-*-freebsd[34] | *-*-freebsd[34].*)
 449           tmake_file="${tmake_file} t-slibgcc-nolc-override"
 450           ;;
 451       esac
 452       ;;
 453     *)
 454       echo 'Unknown thread configuration for FreeBSD'
 455       exit 1
 456       ;;
 457   esac
 458   fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h"
 459   ;;
 460 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu)
 461   # Must come before *-*-gnu* (because of *-*-linux-gnu* systems).
 462   extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
 463   extra_options="${extra_options} linux.opt"
 464   gas=yes
 465   gnu_ld=yes
 466   case ${enable_threads} in
 467     "" | yes | posix) thread_file='posix' ;;
 468   esac
 469   tmake_file="t-slibgcc-elf-ver t-linux"
 470   case ${target} in
 471     *-*-*uclibc*)
 472       tm_defines="${tm_defines} UCLIBC_DEFAULT=1"
 473       ;;
 474     *)
 475       tm_defines="${tm_defines} UCLIBC_DEFAULT=0"
 476       ;;
 477   esac
 478   # Assume that glibc or uClibc are being used and so __cxa_atexit is provided.
 479   default_use_cxa_atexit=yes
 480   use_gcc_tgmath=no
 481   ;;
 482 *-*-gnu*)
 483   # On the Hurd, the setup is just about the same on
 484   # each different CPU.  The specific machines that we
 485   # support are matched above and just set $cpu_type.
 486   tm_file="${cpu_type}/gnu.h"
 487   extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
 488   # GNU tools are the only tools.
 489   gas=yes
 490   gnu_ld=yes
 491   # These details are the same as for Linux.
 492   # But here we need a little extra magic.
 493   tmake_file="t-slibgcc-elf-ver t-linux t-gnu"
 494   case ${target} in
 495     alpha*)
 496       tm_file="${cpu_type}/${cpu_type}.h alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h ${tm_file}"
 497       ;;
 498     i[34567]86-*-*)
 499       tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h gnu.h ${tm_file}"
 500       ;;
 501   esac
 502   # Assume that glibc is being used and so __cxa_atexit is provided.
 503   default_use_cxa_atexit=yes
 504   use_gcc_tgmath=no
 505   ;;
 506 *-*-netbsd*)
 507   tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd t-libgcc-pic"
 508   gas=yes
 509   gnu_ld=yes
 510
 511   # NetBSD 2.0 and later get POSIX threads enabled by default.
 512   # Allow them to be explicitly enabled on any other version.
 513   case ${enable_threads} in
 514     "")
 515       case ${target} in
 516         *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
 517           thread_file='posix'
 518           tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
 519           ;;
 520       esac
 521       ;;
 522     yes | posix)
 523       thread_file='posix'
 524       tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
 525       ;;
 526   esac
 527
 528   # NetBSD 1.7 and later are set up to use GCC's crtstuff for
 529   # ELF configurations.  We will clear extra_parts in the
 530   # a.out configurations.
 531   case ${target} in
 532     *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
 533       extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
 534       ;;
 535   esac
 536
 537   # NetBSD 2.0 and later provide __cxa_atexit(), which we use by
 538   # default (unless overridden by --disable-__cxa_atexit).
 539   case ${target} in
 540     *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
 541       default_use_cxa_atexit=yes
 542       ;;
 543   esac
 544   ;;
 545 *-*-openbsd*)
 546   tmake_file="t-libc-ok t-openbsd t-libgcc-pic"
 547   case ${enable_threads} in
 548     yes)
 549       thread_file='posix'
 550       tmake_file="${tmake_file} t-openbsd-thread"
 551       ;;
 552   esac
 553   case ${target} in
 554     *-*-openbsd2.*|*-*-openbsd3.[012])
 555       tm_defines="${tm_defines} HAS_LIBC_R=1" ;;
 556   esac
 557   ;;
 558 *-*-rtems*)
 559   case ${enable_threads} in
 560     yes) thread_file='rtems' ;;
 561   esac
 562   ;;
 563 *-*-vxworks*)
 564   tmake_file=t-vxworks
 565   xm_defines=POSIX
 566   extra_options="${extra_options} vxworks.opt"
 567   extra_objs=vxworks.o
 568   case ${enable_threads} in
 569     no) ;;
 570     "" | yes | vxworks) thread_file='vxworks' ;;
 571     *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
 572   esac
 573   ;;
 574 *-*-elf)
 575   # Assume that newlib is being used and so __cxa_atexit is provided.
 576   default_use_cxa_atexit=yes
 577   ;;
 578 esac
 579
 580 case ${target} in
 581 # Support site-specific machine types.
 582 *local*)
 583         rest=`echo ${target} | sed -e "s/$cpu_type-//"`
 584         tm_file=${cpu_type}/$rest.h
 585         if test -f $srcdir/config/${cpu_type}/xm-$rest.h
 586         then xm_file=${cpu_type}/xm-$rest.h
 587         fi
 588         if test -f $srcdir/config/${cpu_type}/t-$rest
 589         then tmake_file=${cpu_type}/t-$rest
 590         fi
 591         ;;
 592 alpha*-*-linux*)
 593         tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
 594         target_cpu_default="MASK_GAS"
 595         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee alpha/t-linux"
 596         ;;
 597 alpha*-*-gnu*)
 598         target_cpu_default="MASK_GAS"
 599         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
 600         ;;
 601 alpha*-*-freebsd*)
 602         tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
 603         target_cpu_default="MASK_GAS"
 604         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
 605         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
 606         ;;
 607 alpha*-*-netbsd*)
 608         tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
 609         target_cpu_default="MASK_GAS"
 610         tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
 611         ;;
 612 alpha*-*-openbsd*)
 613         tm_defines="${tm_defines} OBSD_NO_DYNAMIC_LIBRARIES OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
 614         tm_file="alpha/alpha.h openbsd.h alpha/openbsd.h"
 615         # default x-alpha is only appropriate for dec-osf.
 616         target_cpu_default="MASK_GAS"
 617         tmake_file="alpha/t-alpha alpha/t-ieee"
 618         ;;
 619 alpha*-dec-osf[45]*)
 620         if test x$stabs = xyes
 621         then
 622                 tm_file="${tm_file} dbx.h"
 623         fi
 624         if test x$gas != xyes
 625         then
 626                 extra_passes="mips-tfile mips-tdump"
 627         fi
 628         use_collect2=yes
 629         tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf4"
 630         tm_file="${tm_file} alpha/osf.h"
 631         extra_headers=va_list.h
 632         case ${target} in
 633           *-*-osf4*)
 634             # Define TARGET_SUPPORT_ARCH except on 4.0a.
 635             case ${target} in
 636                 *-*-osf4.0a) ;;
 637                 *) tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
 638             esac
 639             ;;
 640           *-*-osf5*)
 641             tm_file="${tm_file} alpha/osf5.h"
 642             tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
 643             ;;
 644         esac
 645         case ${enable_threads} in
 646           "" | yes | posix)
 647             thread_file='posix'
 648             tmake_file="${tmake_file} alpha/t-osf-pthread"
 649             ;;
 650         esac
 651         ;;
 652 alpha64-dec-*vms*)
 653         tm_file="${tm_file} alpha/vms.h alpha/vms64.h"
 654         xm_file="alpha/xm-vms.h"
 655         tmake_file="alpha/t-alpha alpha/t-vms alpha/t-vms64 alpha/t-ieee"
 656         prefix=/gnu
 657         local_prefix=/gnu
 658         ;;
 659 alpha*-dec-*vms*)
 660         tm_file="${tm_file} alpha/vms.h"
 661         xm_file=alpha/xm-vms.h
 662         tmake_file="alpha/t-alpha alpha/t-vms alpha/t-ieee"
 663         prefix=/gnu
 664         local_prefix=/gnu
 665         ;;
 666 arc-*-elf*)
 667         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
 668         extra_parts="crtinit.o crtfini.o"
 669         ;;
 670 arm-*-coff* | armel-*-coff*)
 671         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h"
 672         tmake_file="arm/t-arm arm/t-arm-coff"
 673         ;;
 674 arm-wrs-vxworks)
 675         tm_file="elfos.h arm/elf.h arm/aout.h ${tm_file} vx-common.h vxworks.h arm/vxworks.h"
 676         tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
 677         ;;
 678 arm*-*-freebsd*)
 679         tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
 680         tmake_file="${tmake_file} arm/t-arm arm/t-strongarm-elf"
 681         ;;
 682 arm*-*-netbsdelf*)
 683         tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
 684         tmake_file="${tmake_file} arm/t-arm arm/t-netbsd"
 685         ;;
 686 arm*-*-netbsd*)
 687         tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h"
 688         tmake_file="t-netbsd arm/t-arm arm/t-netbsd"
 689         extra_parts=""
 690         use_collect2=yes
 691         ;;
 692 arm*-*-linux*)                  # ARM GNU/Linux with ELF
 693         tm_file="dbxelf.h elfos.h linux.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
 694         case $target in
 695         arm*b-*)
 696                 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
 697                 ;;
 698         esac
 699         tmake_file="${tmake_file} t-linux arm/t-arm"
 700         case ${target} in
 701         arm*-*-linux-*eabi)
 702             tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h"
 703             tmake_file="$tmake_file arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi"
 704             # The BPABI long long divmod functions return a 128-bit value in
 705             # registers r0-r3.  Correctly modeling that requires the use of
 706             # TImode.
 707             need_64bit_hwint=yes
 708             # The EABI requires the use of __cxa_atexit.
 709             default_use_cxa_atexit=yes
 710             ;;
 711         *)
 712             tmake_file="$tmake_file arm/t-linux"
 713             ;;
 714         esac
 715         tm_file="$tm_file arm/aout.h arm/arm.h"
 716         tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
 717         ;;
 718 arm*-*-uclinux*)                # ARM ucLinux
 719         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h"
 720         tmake_file="arm/t-arm arm/t-arm-elf"
 721         case ${target} in
 722         arm*-*-uclinux-*eabi)
 723             tm_file="$tm_file arm/bpabi.h arm/uclinux-eabi.h"
 724             tmake_file="$tmake_file arm/t-bpabi"
 725             # The BPABI long long divmod functions return a 128-bit value in
 726             # registers r0-r3.  Correctly modeling that requires the use of
 727             # TImode.
 728             need_64bit_hwint=yes
 729             # The EABI requires the use of __cxa_atexit.
 730             default_use_cxa_atexit=yes
 731         esac
 732         tm_file="$tm_file arm/aout.h arm/arm.h"
 733         tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
 734         ;;
 735 arm*-*-ecos-elf)
 736         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
 737         tmake_file="arm/t-arm arm/t-arm-elf"
 738         tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
 739         ;;
 740 arm*-*-eabi* | arm*-*-symbianelf* )
 741         # The BPABI long long divmod functions return a 128-bit value in
 742         # registers r0-r3.  Correctly modeling that requires the use of
 743         # TImode.
 744         need_64bit_hwint=yes
 745         default_use_cxa_atexit=yes
 746         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
 747         tmake_file="arm/t-arm arm/t-arm-elf"
 748         case ${target} in
 749         arm*-*-eabi*)
 750           tmake_file="${tmake_file} arm/t-bpabi"
 751           ;;
 752         arm*-*-symbianelf*)
 753           tm_file="${tm_file} arm/symbian.h"
 754           # We do not include t-bpabi for Symbian OS because the system
 755           # provides its own implementation of the BPABI functions.
 756           tmake_file="${tmake_file} arm/t-symbian"
 757           ;;
 758         esac
 759         tm_file="${tm_file} arm/aout.h arm/arm.h"
 760         tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
 761         ;;
 762 arm*-*-rtems*)
 763         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h"
 764         tmake_file="arm/t-arm arm/t-arm-elf t-rtems arm/t-rtems"
 765         tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
 766         ;;
 767 arm*-*-elf)
 768         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
 769         tmake_file="arm/t-arm arm/t-arm-elf"
 770         tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
 771         ;;
 772 arm*-wince-pe*)
 773         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h"
 774         tmake_file="arm/t-arm arm/t-wince-pe"
 775         extra_options="${extra_options} arm/pe.opt"
 776         extra_objs="pe.o"
 777         ;;
 778 arm-*-pe*)
 779         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h"
 780         tmake_file="arm/t-arm arm/t-pe"
 781         extra_options="${extra_options} arm/pe.opt"
 782         extra_objs="pe.o"
 783         ;;
 784 avr-*-rtems*)
 785         tm_file="avr/avr.h dbxelf.h avr/rtems.h rtems.h"
 786         tmake_file="avr/t-avr t-rtems avr/t-rtems"
 787         ;;
 788 avr-*-*)
 789         tm_file="avr/avr.h dbxelf.h"
 790         ;;
 791 bfin*-elf*)
 792         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
 793         tmake_file=bfin/t-bfin-elf
 794         use_collect2=no
 795         ;;
 796 bfin*-uclinux*)
 797         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h linux.h bfin/uclinux.h"
 798         tmake_file=bfin/t-bfin-uclinux
 799         tm_defines="${tm_defines} UCLIBC_DEFAULT=1"
 800         extra_options="${extra_options} linux.opt"
 801         use_collect2=no
 802         ;;
 803 bfin*-linux-uclibc*)
 804         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h linux.h bfin/linux.h ./linux-sysroot-suffix.h"
 805         tmake_file="t-slibgcc-elf-ver bfin/t-bfin-linux"
 806         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
 807         use_collect2=no
 808         ;;
 809 bfin*-rtems*)
 810         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h"
 811         tmake_file="bfin/t-bfin t-rtems bfin/t-rtems"
 812         ;;
 813 bfin*-*)
 814         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
 815         tmake_file=bfin/t-bfin
 816         use_collect2=no
 817         ;;
 818 crisv32-*-elf | crisv32-*-none)
 819         tm_file="dbxelf.h elfos.h ${tm_file}"
 820         tmake_file="cris/t-cris"
 821         target_cpu_default=32
 822         gas=yes
 823         extra_options="${extra_options} cris/elf.opt"
 824         ;;
 825 cris-*-elf | cris-*-none)
 826         tm_file="dbxelf.h elfos.h ${tm_file}"
 827         tmake_file="cris/t-cris cris/t-elfmulti"
 828         gas=yes
 829         extra_options="${extra_options} cris/elf.opt"
 830         ;;
 831 crisv32-*-linux* | cris-*-linux*)
 832         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h"
 833         # We need to avoid using t-linux, so override default tmake_file
 834         tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
 835         extra_options="${extra_options} cris/linux.opt"
 836         case $target in
 837           cris-*-*)
 838                 target_cpu_default=10
 839                 ;;
 840           crisv32-*-*)
 841                 target_cpu_default=32
 842                 ;;
 843         esac
 844         ;;
 845 crx-*-elf)
 846         tm_file="elfos.h ${tm_file}"
 847         extra_parts="crtbegin.o crtend.o"
 848         use_collect2=no
 849         ;;
 850 fr30-*-elf)
 851         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
 852         tmake_file=fr30/t-fr30
 853         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
 854         ;;
 855 frv-*-elf)
 856         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} frv/frv-abi.h"
 857         tmake_file=frv/t-frv
 858         ;;
 859 frv-*-*linux*)
 860         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} \
 861                  linux.h frv/linux.h frv/frv-abi.h"
 862         tmake_file="${tmake_file} frv/t-frv frv/t-linux"
 863         ;;
 864 h8300-*-rtems*)
 865         tmake_file="h8300/t-h8300 h8300/t-elf t-rtems h8300/t-rtems"
 866         tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h"
 867         ;;
 868 h8300-*-elf*)
 869         tmake_file="h8300/t-h8300 h8300/t-elf"
 870         tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h"
 871         ;;
 872 h8300-*-*)
 873         tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h"
 874         ;;
 875 hppa*64*-*-linux*)
 876         target_cpu_default="MASK_PA_11|MASK_PA_20"
 877         tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \
 878                  pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h pa/pa64-linux.h"
 879         tmake_file="${tmake_file} pa/t-linux64"
 880         gas=yes gnu_ld=yes
 881         need_64bit_hwint=yes
 882         ;;
 883 hppa*-*-linux*)
 884         target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
 885         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \
 886                  pa/pa32-regs.h pa/pa32-linux.h"
 887         tmake_file="${tmake_file} pa/t-linux"
 888         # Set the libgcc version number
 889         if test x$sjlj = x1; then
 890             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
 891         else
 892             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
 893         fi
 894         ;;
 895 # port not yet contributed.
 896 #hppa*-*-openbsd*)
 897 #       target_cpu_default="MASK_PA_11"
 898 #       ;;
 899 hppa[12]*-*-hpux10*)
 900         case ${target} in
 901         hppa1.1-*-* | hppa2*-*-*)
 902                 target_cpu_default="MASK_PA_11"
 903                 ;;
 904         esac
 905         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
 906                  pa/pa-hpux.h pa/pa-hpux10.h"
 907         extra_options="${extra_options} pa/pa-hpux.opt"
 908         case ${target} in
 909         *-*-hpux10.[1-9]*)
 910                 tm_file="${tm_file} pa/pa-hpux1010.h"
 911                 extra_options="${extra_options} pa/pa-hpux1010.opt"
 912                 ;;
 913         esac
 914         tmake_file="pa/t-pa-hpux10 pa/t-pa-hpux pa/t-hpux-shlib"
 915         case ${enable_threads} in
 916           "")
 917             if test x$have_pthread_h = xyes ; then
 918               tmake_file="${tmake_file} pa/t-dce-thr"
 919             fi
 920             ;;
 921           yes | dce)
 922             tmake_file="${tmake_file} pa/t-dce-thr"
 923             ;;
 924         esac
 925         # Set the libgcc version number
 926         if test x$sjlj = x1; then
 927             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
 928         else
 929             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
 930         fi
 931         use_collect2=yes
 932         gas=yes
 933         ;;
 934 hppa*64*-*-hpux11*)
 935         target_cpu_default="MASK_PA_11|MASK_PA_20"
 936         if test x$gnu_ld = xyes
 937         then
 938                 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
 939         fi
 940         tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
 941                  pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
 942                  pa/pa-hpux11.h"
 943         case ${target} in
 944         *-*-hpux11.[1-9]*)
 945                 tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
 946                 extra_options="${extra_options} pa/pa-hpux1111.opt"
 947                 ;;
 948         *)
 949                 tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
 950                 ;;
 951         esac
 952         extra_options="${extra_options} pa/pa-hpux.opt \
 953                        pa/pa-hpux1010.opt pa/pa64-hpux.opt"
 954         need_64bit_hwint=yes
 955         tmake_file="pa/t-pa64 pa/t-pa-hpux pa/t-hpux-shlib"
 956         # Set the libgcc version number
 957         if test x$sjlj = x1; then
 958             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
 959         else
 960             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
 961         fi
 962         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o \
 963                      libgcc_stub.a"
 964         case x${enable_threads} in
 965         x | xyes | xposix )
 966                 thread_file=posix
 967                 ;;
 968         esac
 969         gas=yes
 970         ;;
 971 hppa[12]*-*-hpux11*)
 972         case ${target} in
 973         hppa1.1-*-* | hppa2*-*-*)
 974                 target_cpu_default="MASK_PA_11"
 975                 ;;
 976         esac
 977         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
 978                  pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h"
 979         extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt"
 980         case ${target} in
 981         *-*-hpux11.[1-9]*)
 982                 tm_file="${tm_file} pa/pa-hpux1111.h"
 983                 extra_options="${extra_options} pa/pa-hpux1111.opt"
 984                 ;;
 985         esac
 986         tmake_file="pa/t-pa-hpux11 pa/t-pa-hpux pa/t-hpux-shlib"
 987         # Set the libgcc version number
 988         if test x$sjlj = x1; then
 989             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
 990         else
 991             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
 992         fi
 993         case x${enable_threads} in
 994         x | xyes | xposix )
 995                 thread_file=posix
 996                 ;;
 997         esac
 998         use_collect2=yes
 999         gas=yes
1000         ;;
1001 i[34567]86-*-darwin*)
1002         need_64bit_hwint=yes
1003
1004         # This is so that '.../configure && make' doesn't fail due to
1005         # config.guess deciding that the configuration is i386-*-darwin* and
1006         # then this file using that to set --with-cpu=i386 which has no -m64
1007         # support.
1008         with_cpu=${with_cpu:-generic}
1009         tmake_file="${tmake_file} i386/t-crtpc i386/t-crtfm"
1010         ;;
1011 x86_64-*-darwin*)
1012         with_cpu=${with_cpu:-generic}
1013         tmake_file="t-darwin ${cpu_type}/t-darwin64 t-slibgcc-darwin i386/t-crtpc i386/t-crtfm"
1014         tm_file="${tm_file} ${cpu_type}/darwin64.h"
1015         ;;
1016 i[34567]86-*-elf*)
1017         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h"
1018         tmake_file="i386/t-i386elf t-svr4"
1019         ;;
1020 x86_64-*-elf*)
1021         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/x86-64.h"
1022         tmake_file="i386/t-i386elf t-svr4"
1023         ;;
1024 i[34567]86-*-aout*)
1025         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/i386-aout.h"
1026         ;;
1027 i[34567]86-*-freebsd*)
1028         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
1029         ;;
1030 x86_64-*-freebsd*)
1031         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
1032         tmake_file="${tmake_file} i386/t-crtstuff"
1033         ;;
1034 i[34567]86-*-netbsdelf*)
1035         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
1036         ;;
1037 i[34567]86-*-netbsd*)
1038         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h"
1039         tmake_file=t-netbsd
1040         extra_parts=""
1041         use_collect2=yes
1042         ;;
1043 x86_64-*-netbsd*)
1044         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
1045         tmake_file="${tmake_file} i386/t-crtstuff"
1046         ;;
1047 i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123])
1048         tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h"
1049         # needed to unconfuse gdb
1050         tmake_file="t-libc-ok t-openbsd i386/t-openbsd"
1051         # we need collect2 until our bug is fixed...
1052         use_collect2=yes
1053         ;;
1054 i[34567]86-*-openbsd*)
1055         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
1056         tm_file="${tm_file} openbsd.h i386/openbsdelf.h"
1057         gas=yes
1058         gnu_ld=yes
1059         ;;
1060 i[34567]86-*-coff*)
1061         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/i386-coff.h"
1062         ;;
1063 i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu)
1064                         # Intel 80386's running GNU/*
1065                         # with ELF format using glibc 2
1066         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h"
1067         case ${target} in
1068         i[34567]86-*-linux*)
1069                 if test x$enable_targets = xall; then
1070                         tm_file="${tm_file} i386/x86-64.h i386/linux64.h"
1071                         tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1072                         tmake_file="${tmake_file} i386/t-linux64"
1073                         need_64bit_hwint=yes
1074                         case X"${with_cpu}" in
1075                         Xgeneric|Xcore2|Xnocona|Xx86-64|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx)
1076                                 ;;
1077                         X)
1078                                 if test x$with_cpu_64 = x; then
1079                                         with_cpu_64=generic
1080                                 fi
1081                                 ;;
1082                         *)
1083                                 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1084                                 echo "generic core2 nocona x86-64 amdfam10 barcelona k8 opteron athlon64 athlon-fx" 1>&2
1085                                 exit 1
1086                                 ;;
1087                         esac
1088                 else
1089                         tm_file="${tm_file} i386/linux.h"
1090                 fi
1091                 ;;
1092         i[34567]86-*-knetbsd*-gnu) tm_file="${tm_file} i386/linux.h knetbsd-gnu.h i386/knetbsd-gnu.h" ;;
1093         i[34567]86-*-kfreebsd*-gnu) tm_file="${tm_file} i386/linux.h kfreebsd-gnu.h i386/kfreebsd-gnu.h" ;;
1094         esac
1095         tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtpc i386/t-crtfm t-dfprules"
1096         ;;
1097 x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
1098         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h \
1099                  i386/x86-64.h i386/linux64.h"
1100         case ${target} in
1101         x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h" ;;
1102         x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;;
1103         esac
1104         tmake_file="${tmake_file} i386/t-linux64 i386/t-crtstuff i386/t-crtpc i386/t-crtfm t-dfprules"
1105         ;;
1106 i[34567]86-*-gnu*)
1107         ;;
1108 i[34567]86-pc-msdosdjgpp*)
1109         xm_file=i386/xm-djgpp.h
1110         tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h"
1111         tmake_file=i386/t-djgpp
1112         extra_options="${extra_options} i386/djgpp.opt"
1113         gnu_ld=yes
1114         gas=yes
1115         ;;
1116 i[34567]86-*-lynxos*)
1117         xm_defines=POSIX
1118         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
1119         tmake_file="i386/t-crtstuff t-lynx"
1120         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1121         extra_options="${extra_options} lynx.opt"
1122         thread_file=lynx
1123         gnu_ld=yes
1124         gas=yes
1125         ;;
1126 i[3456x]86-*-netware*)
1127         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h tm-dwarf2.h i386/netware.h"
1128         tmake_file=i386/t-netware
1129         extra_objs=netware.o
1130         case /${with_ld} in
1131         */nwld)
1132                 extra_objs="$extra_objs nwld.o"
1133                 tm_file="${tm_file} i386/nwld.h"
1134                 tmake_file="${tmake_file} i386/t-nwld"
1135                 extra_parts="crt0.o libgcc.def libc.def libcpre.def posixpre.def"
1136                 ;;
1137         esac
1138         case x${enable_threads} in
1139         x | xyes | xposix) thread_file='posix';;
1140         xnks) thread_file='nks';;
1141         xno) ;;
1142         *) echo 'Unknown thread configuration for NetWare' >&2; exit 1;;
1143         esac
1144         ;;
1145 i[34567]86-*-nto-qnx*)
1146         tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h svr4.h i386/unix.h i386/nto.h"
1147         tmake_file=i386/t-nto
1148         gnu_ld=yes
1149         gas=yes
1150         ;;
1151 i[34567]86-*-rtems*)
1152         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h"
1153         extra_parts="crtbegin.o crtend.o crti.o crtn.o"
1154         tmake_file="i386/t-rtems-i386 i386/t-crtstuff t-rtems"
1155         ;;
1156 i[34567]86-*-solaris2*)
1157         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h"
1158         case ${target} in
1159         *-*-solaris2.1[0-9]*)
1160                 tm_file="${tm_file} sol2-10.h"
1161                 ;;
1162         esac
1163         tm_file="${tm_file} i386/sol2.h"
1164         tmake_file="t-sol2 i386/t-sol2 t-svr4"
1165         c_target_objs="sol2-c.o"
1166         cxx_target_objs="sol2-c.o"
1167         extra_objs="sol2.o"
1168         tm_p_file="${tm_p_file} sol2-protos.h"
1169         if test x$gnu_ld = xyes; then
1170                 tmake_file="$tmake_file t-slibgcc-elf-ver"
1171                 tm_defines="${tm_defines} TARGET_GNU_LD=1"
1172         else
1173                 tmake_file="$tmake_file t-slibgcc-sld"
1174         fi
1175         if test x$gas = xyes; then
1176                 tm_file="usegas.h ${tm_file}"
1177         fi
1178         tm_file="$tm_file tm-dwarf2.h"
1179         case ${target} in
1180         *-*-solaris2.1[0-9]*)
1181                 tm_file="${tm_file} i386/x86-64.h i386/sol2-10.h"
1182                 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1183                 tmake_file="$tmake_file i386/t-crtstuff i386/t-sol2-10"
1184                 need_64bit_hwint=yes
1185                 case X"${with_cpu}" in
1186                 Xgeneric|Xcore2|Xnocona|Xx86-64|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx)
1187                         ;;
1188                 X)
1189                         if test x$with_cpu_64 = x; then
1190                                 with_cpu_64=generic
1191                         fi
1192                         ;;
1193                 *)
1194                         echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1195                         echo "generic core2 nocona x86-64 amdfam10 barcelona k8 opteron athlon64 athlon-fx" 1>&2
1196                         exit 1
1197                         ;;
1198                 esac
1199                 # Solaris 2.10 provides crt1.o, crti.o, crtn.o, and gcrt1.o as
1200                 # part of the base system.
1201                 extra_parts="gmon.o crtbegin.o crtend.o"
1202                 ;;
1203         *)
1204                 extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
1205                 ;;
1206         esac
1207         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
1208           "":yes:* | yes:yes:* )
1209                 thread_file=posix
1210                 ;;
1211           "":*:yes | yes:*:yes )
1212                 thread_file=solaris
1213                 ;;
1214         esac
1215         ;;
1216 i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae)
1217         tm_file="${tm_file} i386/unix.h i386/att.h elfos.h svr4.h vx-common.h"
1218         case ${target} in
1219           *-vxworksae*)
1220             tm_file="${tm_file} vxworksae.h i386/vx-common.h i386/vxworksae.h"
1221             tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae"
1222             ;;
1223           *)
1224             tm_file="${tm_file} vxworks.h i386/vx-common.h i386/vxworks.h"
1225             tmake_file="${tmake_file} i386/t-vxworks"
1226             ;;
1227         esac
1228         ;;
1229 i[34567]86-*-pe | i[34567]86-*-cygwin*)
1230         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h"
1231         xm_file=i386/xm-cygwin.h
1232         tmake_file="i386/t-cygwin i386/t-cygming"
1233         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1234         extra_options="${extra_options} i386/cygming.opt"
1235         extra_objs="winnt.o winnt-stubs.o"
1236         c_target_objs="cygwin2.o msformat-c.o"
1237         cxx_target_objs="cygwin2.o winnt-cxx.o msformat-c.o"
1238         extra_gcc_objs=cygwin1.o
1239         if test x$enable_threads = xyes; then
1240                 thread_file='posix'
1241         fi
1242         ;;
1243 i[34567]86-*-mingw* | x86_64-*-mingw*)
1244         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h"
1245         xm_file=i386/xm-mingw32.h
1246         tmake_file="i386/t-cygming i386/t-mingw32"
1247         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1248         extra_options="${extra_options} i386/cygming.opt"
1249         extra_objs="winnt.o winnt-stubs.o"
1250         c_target_objs="msformat-c.o"
1251         cxx_target_objs="winnt-cxx.o msformat-c.o"
1252         default_use_cxa_atexit=yes
1253         case ${enable_threads} in
1254           "" | yes | win32)
1255           thread_file='win32'
1256           tmake_file="${tmake_file} i386/t-gthr-win32"
1257           ;;
1258         esac
1259         case ${target} in
1260                 x86_64-*-mingw*)
1261                         tmake_file="${tmake_file} i386/t-crtfm"
1262                         ;;
1263                 *)
1264                         ;;
1265         esac
1266         case ${target} in
1267                 *mingw32crt*)
1268                         tm_file="${tm_file} i386/crtdll.h"
1269                         ;;
1270                 *mingw32msv* | *mingw*)
1271                         ;;
1272         esac
1273         ;;
1274 i[34567]86-*-interix3*)
1275         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
1276         tmake_file="i386/t-interix"
1277         extra_objs=winnt.o
1278         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1279         if test x$enable_threads = xyes ; then
1280                 thread_file='posix'
1281         fi
1282         if test x$stabs = xyes ; then
1283                 tm_file="${tm_file} dbxcoff.h"
1284         fi
1285         ;;
1286 ia64*-*-elf*)
1287         tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/elf.h"
1288         tmake_file="ia64/t-ia64"
1289         target_cpu_default="0"
1290         if test x$gas = xyes
1291         then
1292                 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1293         fi
1294         if test x$gnu_ld = xyes
1295         then
1296                 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1297         fi
1298         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1299         ;;
1300 ia64*-*-freebsd*)
1301         tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
1302         target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1303         tmake_file="${tmake_file} ia64/t-ia64"
1304         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1305         ;;
1306 ia64*-*-linux*)
1307         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h ia64/sysv4.h ia64/linux.h"
1308         tmake_file="${tmake_file} ia64/t-ia64 t-libunwind ia64/t-glibc"
1309         if test x$with_system_libunwind != xyes ; then
1310                 tmake_file="${tmake_file} t-libunwind-elf ia64/t-glibc-libunwind"
1311         fi
1312         target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1313         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1314         ;;
1315 ia64*-*-hpux*)
1316         tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h"
1317         tmake_file="ia64/t-ia64 ia64/t-hpux"
1318         target_cpu_default="MASK_GNU_AS"
1319         case x$enable_threads in
1320         x | xyes | xposix )
1321                 thread_file=posix
1322                 ;;
1323         esac
1324         use_collect2=no
1325         c_target_objs="ia64-c.o"
1326         cxx_target_objs="ia64-c.o"
1327         extra_options="${extra_options} ia64/ilp32.opt"
1328         ;;
1329 iq2000*-*-elf*)
1330         tm_file="svr4.h elfos.h iq2000/iq2000.h"
1331         tmake_file=iq2000/t-iq2000
1332         out_file=iq2000/iq2000.c
1333         md_file=iq2000/iq2000.md
1334         ;;
1335 m32r-*-elf*)
1336         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1337         extra_parts="crtinit.o crtfini.o"
1338         ;;
1339 m32rle-*-elf*)
1340         tm_file="dbxelf.h elfos.h svr4.h m32r/little.h ${tm_file}"
1341         extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o"
1342         ;;
1343 m32r-*-linux*)
1344         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} m32r/linux.h"
1345         # We override the tmake_file for linux -- why?
1346         tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1347         gnu_ld=yes
1348         if test x$enable_threads = xyes; then
1349                 thread_file='posix'
1350         fi
1351         ;;
1352 m32rle-*-linux*)
1353         tm_file="dbxelf.h elfos.h svr4.h linux.h m32r/little.h ${tm_file} m32r/linux.h"
1354         # We override the tmake_file for linux -- why?
1355         tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1356         gnu_ld=yes
1357         if test x$enable_threads = xyes; then
1358                 thread_file='posix'
1359         fi
1360         ;;
1361 # m68hc11 and m68hc12 share the same machine description.
1362 m68hc11-*-*|m6811-*-*)
1363         tm_file="dbxelf.h elfos.h usegas.h m68hc11/m68hc11.h"
1364         tm_p_file="m68hc11/m68hc11-protos.h"
1365         md_file="m68hc11/m68hc11.md"
1366         out_file="m68hc11/m68hc11.c"
1367         tmake_file="m68hc11/t-m68hc11"
1368         ;;
1369 m68hc12-*-*|m6812-*-*)
1370         tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h usegas.h m68hc11/m68hc11.h"
1371         tm_p_file="m68hc11/m68hc11-protos.h"
1372         md_file="m68hc11/m68hc11.md"
1373         out_file="m68hc11/m68hc11.c"
1374         tmake_file="m68hc11/t-m68hc11"
1375         extra_options="${extra_options} m68hc11/m68hc11.opt"
1376         ;;
1377 m68k-*-aout*)
1378         default_m68k_cpu=68020
1379         default_cf_cpu=5206
1380         tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-mlibs"
1381         tm_file="${tm_file} m68k/m68k-none.h m68k/m68kemb.h m68k/m68k-aout.h libgloss.h"
1382         ;;
1383 m68k-*-coff*)
1384         default_m68k_cpu=68020
1385         default_cf_cpu=5206
1386         tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-mlibs"
1387         tm_defines="${tm_defines} MOTOROLA=1"
1388         tm_file="${tm_file} m68k/m68k-none.h m68k/m68kemb.h dbxcoff.h m68k/coff.h dbx.h"
1389         ;;
1390 m68k-*-elf* | fido-*-elf*)
1391         case ${target} in
1392         fido-*-elf*)
1393                 # Check that $with_cpu makes sense.
1394                 case $with_cpu in
1395                 "" | "fidoa")
1396                         ;;
1397                 *)
1398                         echo "Cannot accept --with-cpu=$with_cpu"
1399                         exit 1
1400                         ;;
1401                 esac
1402                 with_cpu=fidoa
1403                 ;;
1404         *)
1405                 default_m68k_cpu=68020
1406                 default_cf_cpu=5206
1407                 ;;
1408         esac
1409         tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h"
1410         tm_defines="${tm_defines} MOTOROLA=1"
1411         tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-m68kelf"
1412         # Add multilibs for targets other than fido.
1413         case ${target} in
1414         fido-*-elf*)
1415                 ;;
1416         *)
1417                 tmake_file="$tmake_file m68k/t-mlibs"
1418                 ;;
1419         esac
1420         extra_parts="crtbegin.o crtend.o"
1421         ;;
1422 m68k*-*-netbsdelf*)
1423         default_m68k_cpu=68020
1424         default_cf_cpu=5475
1425         tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
1426         tm_defines="${tm_defines} MOTOROLA=1"
1427         ;;
1428 m68k*-*-openbsd*)
1429         default_m68k_cpu=68020
1430         default_cf_cpu=5475
1431         # needed to unconfuse gdb
1432         tm_defines="${tm_defines} OBSD_OLD_GAS"
1433         tm_file="${tm_file} openbsd.h m68k/openbsd.h"
1434         tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
1435         # we need collect2 until our bug is fixed...
1436         use_collect2=yes
1437         ;;
1438 m68k-*-uclinuxoldabi*)          # Motorola m68k/ColdFire running uClinux
1439                                 # with uClibc, using the original
1440                                 # m68k-elf-based ABI
1441         default_m68k_cpu=68020
1442         default_cf_cpu=5206
1443         tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux-oldabi.h"
1444         tm_defines="${tm_defines} MOTOROLA=1"
1445         tmake_file="m68k/t-floatlib m68k/t-uclinux"
1446         ;;
1447 m68k-*-uclinux*)                # Motorola m68k/ColdFire running uClinux
1448                                 # with uClibc, using the new GNU/Linux-style
1449                                 # ABI.
1450         default_m68k_cpu=68020
1451         default_cf_cpu=5206
1452         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h"
1453         tm_defines="${tm_defines} MOTOROLA=1 UCLIBC_DEFAULT=1"
1454         extra_options="${extra_options} linux.opt"
1455         tmake_file="m68k/t-floatlib m68k/t-uclinux m68k/t-mlibs"
1456         ;;
1457 m68k-*-linux*)          # Motorola m68k's running GNU/Linux
1458                                 # with ELF format using glibc 2
1459                                 # aka the GNU/Linux C library 6.
1460         default_m68k_cpu=68020
1461         default_cf_cpu=5475
1462         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h m68k/linux.h"
1463         extra_options="${extra_options} m68k/ieee.opt"
1464         tm_defines="${tm_defines} MOTOROLA=1"
1465         # if not configured with --enable-sjlj-exceptions, bump the
1466         # libgcc version number
1467         if test x$sjlj != x1; then
1468             tmake_file="$tmake_file m68k/t-slibgcc-elf-ver"
1469         fi
1470         ;;
1471 m68k-*-rtems*)
1472         default_m68k_cpu=68020
1473         default_cf_cpu=5206
1474         tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems m68k/t-mlibs"
1475         tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h"
1476         tm_defines="${tm_defines} MOTOROLA=1"
1477         extra_parts="crtbegin.o crtend.o"
1478         ;;
1479 mcore-*-elf)
1480         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} mcore/mcore-elf.h"
1481         tmake_file=mcore/t-mcore
1482         inhibit_libc=true
1483         ;;
1484 mcore-*-pe*)
1485         tm_file="svr3.h dbxcoff.h ${tm_file} mcore/mcore-pe.h"
1486         tmake_file=mcore/t-mcore-pe
1487         inhibit_libc=true
1488         ;;
1489 mips-sgi-irix[56]*)
1490         tm_file="elfos.h ${tm_file} mips/iris.h"
1491         tmake_file="mips/t-iris mips/t-slibgcc-irix"
1492         target_cpu_default="MASK_ABICALLS"
1493         case ${target} in
1494         *-*-irix5*)
1495                 tm_file="${tm_file} mips/iris5.h"
1496                 ;;
1497
1498         *-*-irix6*)
1499                 tm_file="${tm_file} mips/iris6.h"
1500                 tmake_file="${tmake_file} mips/t-iris6"
1501                 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
1502                 ;;
1503         esac
1504         if test "x$stabs" = xyes
1505         then
1506                 tm_file="${tm_file} dbx.h mips/dbxmdebug.h"
1507         fi
1508         if test "x$gnu_ld" = xyes
1509         then
1510                 tm_defines="${tm_defines} IRIX_USING_GNU_LD"
1511         fi
1512         case ${enable_threads}:${have_pthread_h} in
1513           "":yes | yes:yes ) thread_file=posix ;;
1514         esac
1515         use_fixproto=yes
1516         ;;
1517 mips*-*-netbsd*)                        # NetBSD/mips, either endian.
1518         target_cpu_default="MASK_ABICALLS"
1519         tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
1520         ;;
1521 mips64*-*-linux*)
1522         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h mips/linux64.h"
1523         tmake_file="${tmake_file} mips/t-linux64"
1524         tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_N32"
1525         case ${target} in
1526                 mips64el-st-linux-gnu)
1527                         tm_file="${tm_file} mips/st.h"
1528                         tmake_file="${tmake_file} mips/t-st"
1529                         ;;
1530         esac
1531         gnu_ld=yes
1532         gas=yes
1533         test x$with_llsc != x || with_llsc=yes
1534         ;;
1535 mips*-*-linux*)                         # Linux MIPS, either endian.
1536         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h"
1537         case ${target} in
1538         mipsisa32r2*)
1539                 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33"
1540                 ;;
1541         mipsisa32*)
1542                 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1543         esac
1544         test x$with_llsc != x || with_llsc=yes
1545         ;;
1546 mips*-*-openbsd*)
1547         tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
1548         target_cpu_default="MASK_ABICALLS"
1549         tm_file="mips/mips.h openbsd.h mips/openbsd.h mips/sdb.h"
1550         case ${target} in
1551         mips*el-*-openbsd*)
1552             tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";;
1553         *)  tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";;
1554         esac
1555         ;;
1556 mips*-sde-elf*)
1557         tm_file="elfos.h ${tm_file} mips/elf.h mips/sde.h"
1558         tmake_file="mips/t-sde mips/t-libgcc-mips16"
1559         case "${with_newlib}" in
1560           yes)
1561             # newlib / libgloss.
1562             ;;
1563           *)
1564             # MIPS toolkit libraries.
1565             tm_file="$tm_file mips/sdemtk.h"
1566             tmake_file="$tmake_file mips/t-sdemtk"
1567             extra_options="$extra_options mips/sdemtk.opt"
1568             case ${enable_threads} in
1569               "" | yes | mipssde)
1570                 thread_file='mipssde'
1571                 ;;
1572             esac
1573             ;;
1574         esac
1575         case ${target} in
1576           mipsisa32r2*)
1577             tm_defines="MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_32"
1578             ;;
1579           mipsisa32*)
1580             tm_defines="MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_32"
1581             ;;
1582           mipsisa64*)
1583             tm_defines="MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_N32"
1584             ;;
1585         esac
1586         ;;
1587 mipsisa32-*-elf* | mipsisa32el-*-elf* | \
1588 mipsisa32r2-*-elf* | mipsisa32r2el-*-elf* | \
1589 mipsisa64-*-elf* | mipsisa64el-*-elf*)
1590         tm_file="elfos.h ${tm_file} mips/elf.h"
1591         tmake_file="mips/t-isa3264 mips/t-libgcc-mips16"
1592         case ${target} in
1593           mipsisa32r2*)
1594             tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33"
1595             ;;
1596           mipsisa32*)
1597             tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1598             ;;
1599           mipsisa64*)
1600             tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64"
1601             ;;
1602         esac
1603         case ${target} in
1604           mipsisa32*-*-elfoabi*)
1605             tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_32"
1606             tm_file="${tm_file} mips/elfoabi.h"
1607             ;;
1608           mipsisa64*-*-elfoabi*)
1609             tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_O64"
1610             tm_file="${tm_file} mips/elfoabi.h"
1611             ;;
1612           *-*-elf*)
1613             tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
1614             ;;
1615         esac
1616         ;;
1617 mipsisa64sr71k-*-elf*)
1618         tm_file="elfos.h ${tm_file} mips/elf.h"
1619         tmake_file=mips/t-sr71k
1620         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1621         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
1622         ;;
1623 mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
1624         tm_file="elfos.h ${tm_file} mips/elf.h"
1625         tmake_file="mips/t-elf mips/t-libgcc-mips16 mips/t-sb1"
1626         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1627         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
1628         ;;
1629 mips-*-elf* | mipsel-*-elf*)
1630         tm_file="elfos.h ${tm_file} mips/elf.h"
1631         tmake_file="mips/t-elf mips/t-libgcc-mips16"
1632         ;;
1633 mips64-*-elf* | mips64el-*-elf*)
1634         tm_file="elfos.h ${tm_file} mips/elf.h"
1635         tmake_file="mips/t-elf mips/t-libgcc-mips16"
1636         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1637         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1638         ;;
1639 mips64vr-*-elf* | mips64vrel-*-elf*)
1640         tm_file="mips/vr.h elfos.h ${tm_file} mips/elf.h"
1641         tmake_file=mips/t-vr
1642         ;;
1643 mips64orion-*-elf* | mips64orionel-*-elf*)
1644         tm_file="elfos.h ${tm_file} mips/elforion.h mips/elf.h"
1645         tmake_file="mips/t-elf mips/t-libgcc-mips16"
1646         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1647         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1648         ;;
1649 mips*-*-rtems*)
1650         tm_file="elfos.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
1651         tmake_file="mips/t-elf mips/t-libgcc-mips16 t-rtems mips/t-rtems"
1652         ;;
1653 mips-wrs-vxworks)
1654         tm_file="elfos.h ${tm_file} svr4.h mips/elf.h vx-common.h vxworks.h mips/vxworks.h"
1655         tmake_file="${tmake_file} mips/t-vxworks"
1656         ;;
1657 mipstx39-*-elf* | mipstx39el-*-elf*)
1658         tm_file="elfos.h ${tm_file} mips/r3900.h mips/elf.h"
1659         tmake_file="mips/t-r3900 mips/t-libgcc-mips16"
1660         ;;
1661 mmix-knuth-mmixware)
1662         need_64bit_hwint=yes
1663         ;;
1664 mn10300-*-*)
1665         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1666         if test x$stabs = xyes
1667         then
1668                 tm_file="${tm_file} dbx.h"
1669         fi
1670         use_collect2=no
1671         ;;
1672 pdp11-*-bsd)
1673         tm_file="${tm_file} pdp11/2bsd.h"
1674         use_fixproto=yes
1675         ;;
1676 pdp11-*-*)
1677         ;;
1678 # port not yet contributed
1679 #powerpc-*-openbsd*)
1680 #       tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit "
1681 #       extra_headers=
1682 #       ;;
1683 powerpc64-*-linux*)
1684         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1685         test x$with_cpu != x || cpu_is_64bit=yes
1686         test x$cpu_is_64bit != xyes || tm_file="${tm_file} rs6000/default64.h"
1687         tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
1688         if test x${enable_secureplt} = xyes; then
1689                 tm_file="rs6000/secureplt.h ${tm_file}"
1690         fi
1691         extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
1692         tmake_file="t-dfprules rs6000/t-fprules ${tmake_file} rs6000/t-ppccomm rs6000/t-linux64 rs6000/t-fprules-softfp soft-fp/t-softfp"
1693         ;;
1694 powerpc64-*-gnu*)
1695         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux64.h rs6000/gnu.h"
1696         extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
1697         tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-gnu rs6000/t-linux64 rs6000/t-fprules-softfp soft-fp/t-softfp"
1698         ;;
1699 powerpc-*-darwin*)
1700         extra_options="${extra_options} rs6000/darwin.opt"
1701         extra_parts="crt2.o"
1702         case ${target} in
1703           *-darwin1[0-9]* | *-darwin[8-9]*)
1704             tmake_file="${tmake_file} rs6000/t-darwin8"
1705             tm_file="${tm_file} rs6000/darwin8.h"
1706             ;;
1707           *-darwin7*)
1708             tm_file="${tm_file} rs6000/darwin7.h"
1709             ;;
1710           *-darwin[0-6]*)
1711             ;;
1712         esac
1713         extra_headers=altivec.h
1714         ;;
1715 powerpc64-*-darwin*)
1716         tm_file="${tm_file} ${cpu_type}/darwin8.h ${cpu_type}/darwin64.h"
1717         extra_options="${extra_options} ${cpu_type}/darwin.opt"
1718         # We're omitting t-darwin8 to avoid building any multilibs
1719         extra_headers=altivec.h
1720         ;;
1721 powerpc*-*-freebsd*)
1722         tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
1723         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1724         extra_options="${extra_options} rs6000/sysv4.opt"
1725         ;;
1726 powerpc-*-netbsd*)
1727         tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
1728         tmake_file="${tmake_file} rs6000/t-netbsd"
1729         extra_options="${extra_options} rs6000/sysv4.opt"
1730         ;;
1731 powerpc-*-eabispe*)
1732         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabispe.h"
1733         extra_options="${extra_options} rs6000/sysv4.opt"
1734         tmake_file="rs6000/t-spe rs6000/t-ppccomm"
1735         ;;
1736 powerpc-*-eabisimaltivec*)
1737         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h rs6000/eabialtivec.h"
1738         extra_options="${extra_options} rs6000/sysv4.opt"
1739         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
1740         ;;
1741 powerpc-*-eabisim*)
1742         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
1743         extra_options="${extra_options} rs6000/sysv4.opt"
1744         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1745         ;;
1746 powerpc-*-elf*)
1747         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1748         extra_options="${extra_options} rs6000/sysv4.opt"
1749         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1750         ;;
1751 powerpc-*-eabialtivec*)
1752         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabialtivec.h"
1753         extra_options="${extra_options} rs6000/sysv4.opt"
1754         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
1755         ;;
1756 powerpc-*-eabi*)
1757         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
1758         extra_options="${extra_options} rs6000/sysv4.opt"
1759         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1760         ;;
1761 powerpc-*-rtems*)
1762         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/rtems.h rtems.h"
1763         extra_options="${extra_options} rs6000/sysv4.opt"
1764         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-rtems t-rtems rs6000/t-ppccomm"
1765         ;;
1766 powerpc-*-linux*altivec*)
1767         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h"
1768         extra_options="${extra_options} rs6000/sysv4.opt"
1769         tmake_file="rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1770         ;;
1771 powerpc-*-linux*spe*)
1772         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxspe.h rs6000/e500.h"
1773         extra_options="${extra_options} rs6000/sysv4.opt"
1774         tmake_file="t-dfprules rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1775         ;;
1776 powerpc-*-linux*paired*)
1777         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/750cl.h"
1778         extra_options="${extra_options} rs6000/sysv4.opt"
1779         tmake_file="rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1780         ;;
1781 powerpc-*-linux*)
1782         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1783         extra_options="${extra_options} rs6000/sysv4.opt"
1784         tmake_file="t-dfprules rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1785         case ${enable_targets}:${cpu_is_64bit} in
1786             *powerpc64* | all:* | *:yes)
1787                 if test x$cpu_is_64bit = xyes; then
1788                     tm_file="${tm_file} rs6000/default64.h"
1789                 fi
1790                 tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
1791                 tmake_file="$tmake_file rs6000/t-linux64"
1792                 extra_options="${extra_options} rs6000/linux64.opt"
1793                 ;;
1794             *)
1795                 tm_file="${tm_file} rs6000/linux.h"
1796                 ;;
1797         esac
1798         if test x${enable_secureplt} = xyes; then
1799                 tm_file="rs6000/secureplt.h ${tm_file}"
1800         fi
1801         ;;
1802 powerpc-*-gnu-gnualtivec*)
1803         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h"
1804         extra_options="${extra_options} rs6000/sysv4.opt"
1805         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1806         if test x$enable_threads = xyes; then
1807                 thread_file='posix'
1808         fi
1809         ;;
1810 powerpc-*-gnu*)
1811         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h"
1812         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1813         extra_options="${extra_options} rs6000/sysv4.opt"
1814         if test x$enable_threads = xyes; then
1815                 thread_file='posix'
1816         fi
1817         ;;
1818 powerpc-wrs-vxworks|powerpc-wrs-vxworksae)
1819         tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1820         tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppccomm rs6000/t-vxworks"
1821         extra_options="${extra_options} rs6000/sysv4.opt"
1822         extra_headers=ppc-asm.h
1823         case ${target} in
1824           *-vxworksae*)
1825             tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/e500.h rs6000/vxworksae.h"
1826             tmake_file="${tmake_file} rs6000/t-vxworksae"
1827             ;;
1828           *-vxworks*)
1829             tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h rs6000/e500.h"
1830             ;;
1831         esac
1832         ;;
1833 powerpc-*-lynxos*)
1834         xm_defines=POSIX
1835         tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
1836         tmake_file="t-lynx rs6000/t-lynx"
1837         extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
1838         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1839         extra_options="${extra_options} lynx.opt"
1840         thread_file=lynx
1841         gnu_ld=yes
1842         gas=yes
1843         ;;
1844 powerpcle-*-elf*)
1845         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
1846         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1847         extra_options="${extra_options} rs6000/sysv4.opt"
1848         ;;
1849 powerpcle-*-eabisim*)
1850         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
1851         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1852         extra_options="${extra_options} rs6000/sysv4.opt"
1853         ;;
1854 powerpcle-*-eabi*)
1855         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h"
1856         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1857         extra_options="${extra_options} rs6000/sysv4.opt"
1858         ;;
1859 rs6000-ibm-aix4.[12]* | powerpc-ibm-aix4.[12]*)
1860         tm_file="${tm_file} rs6000/aix.h rs6000/aix41.h rs6000/xcoff.h"
1861         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-newas"
1862         extra_options="${extra_options} rs6000/aix41.opt"
1863         use_collect2=yes
1864         extra_headers=
1865         use_fixproto=yes
1866         ;;
1867 rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
1868         tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h"
1869         tmake_file=rs6000/t-aix43
1870         extra_options="${extra_options} rs6000/aix64.opt"
1871         use_collect2=yes
1872         thread_file='aix'
1873         extra_headers=
1874         ;;
1875 rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
1876         tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h"
1877         extra_options="${extra_options} rs6000/aix64.opt"
1878         tmake_file=rs6000/t-aix43
1879         use_collect2=yes
1880         thread_file='aix'
1881         extra_headers=
1882         ;;
1883 rs6000-ibm-aix5.2.* | powerpc-ibm-aix5.2.*)
1884         tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h"
1885         tmake_file=rs6000/t-aix52
1886         extra_options="${extra_options} rs6000/aix64.opt"
1887         use_collect2=yes
1888         thread_file='aix'
1889         extra_headers=
1890         ;;
1891 rs6000-ibm-aix5.3.* | powerpc-ibm-aix5.3.*)
1892         tm_file="${tm_file} rs6000/aix.h rs6000/aix53.h rs6000/xcoff.h"
1893         tmake_file=rs6000/t-aix52
1894         extra_options="${extra_options} rs6000/aix64.opt"
1895         use_collect2=yes
1896         thread_file='aix'
1897         extra_headers=altivec.h
1898         ;;
1899 rs6000-ibm-aix[6789].* | powerpc-ibm-aix[6789].*)
1900         tm_file="${tm_file} rs6000/aix.h rs6000/aix61.h rs6000/xcoff.h"
1901         tmake_file=rs6000/t-aix52
1902         extra_options="${extra_options} rs6000/aix64.opt"
1903         use_collect2=yes
1904         thread_file='aix'
1905         extra_headers=altivec.h
1906         ;;
1907 s390-*-linux*)
1908         tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
1909         tmake_file="${tmake_file} t-dfprules s390/t-crtstuff s390/t-linux"
1910         ;;
1911 s390x-*-linux*)
1912         tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
1913         tm_p_file=s390/s390-protos.h
1914         md_file=s390/s390.md
1915         extra_modes=s390/s390-modes.def
1916         out_file=s390/s390.c
1917         tmake_file="${tmake_file} t-dfprules s390/t-crtstuff s390/t-linux s390/t-linux64"
1918         ;;
1919 s390x-ibm-tpf*)
1920         tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h s390/tpf.h"
1921         tm_p_file=s390/s390-protos.h
1922         md_file=s390/s390.md
1923         extra_modes=s390/s390-modes.def
1924         out_file=s390/s390.c
1925         extra_parts="crtbeginS.o crtendS.o"
1926         tmake_file="s390/t-crtstuff s390/t-tpf"
1927         thread_file='tpf'
1928         extra_options="${extra_options} s390/tpf.opt"
1929         ;;
1930 score-*-elf)
1931         tm_file="dbxelf.h elfos.h score/elf.h score/score.h"
1932         tmake_file=score/t-score-elf
1933         extra_objs="score7.o score3.o"
1934         ;;
1935 sh-*-elf* | sh[12346l]*-*-elf* | \
1936 sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \
1937   sh-*-linux* | sh[2346lbe]*-*-linux* | \
1938   sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
1939    sh64-*-netbsd* | sh64l*-*-netbsd*)
1940         tmake_file="${tmake_file} sh/t-sh sh/t-elf"
1941         if test x${with_endian} = x; then
1942                 case ${target} in
1943                 sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;;
1944                 shbe-*-* | sheb-*-*)               with_endian=big,little ;;
1945                 sh[1234]l* | sh[34]*-*-linux*)     with_endian=little ;;
1946                 shl* | sh64l* | sh*-*-linux* | \
1947                   sh5l* | sh-superh-elf)           with_endian=little,big ;;
1948                 sh[1234]*-*-*)                     with_endian=big ;;
1949                 *)                                 with_endian=big,little ;;
1950                 esac
1951         fi
1952         case ${with_endian} in
1953         big|little)     tmake_file="${tmake_file} sh/t-1e" ;;
1954         big,little|little,big) ;;
1955         *)      echo "with_endian=${with_endian} not supported."; exit 1 ;;
1956         esac
1957         case ${with_endian} in
1958         little*)        tm_file="sh/little.h ${tm_file}" ;;
1959         esac
1960         tm_file="${tm_file} dbxelf.h elfos.h"
1961         case ${target} in
1962         sh*-*-netbsd*)  ;;
1963         *)              tm_file="${tm_file} svr4.h" ;;
1964         esac
1965         tm_file="${tm_file} sh/elf.h"
1966         case ${target} in
1967         sh*-*-linux*)   tmake_file="${tmake_file} sh/t-linux"
1968                         tm_file="${tm_file} linux.h sh/linux.h" ;;
1969         sh*-*-netbsd*)  tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h" ;;
1970         sh*-superh-elf) if test x$with_libgloss != xno; then
1971                                 with_libgloss=yes
1972                                 tm_file="${tm_file} sh/newlib.h"
1973                         fi
1974                         tm_file="${tm_file} sh/embed-elf.h sh/superh.h"
1975                         tmake_file="${tmake_file} sh/t-superh"
1976                         extra_options="${extra_options} sh/superh.opt" ;;
1977         *)              if test x$with_newlib = xyes \
1978                            && test x$with_libgloss = xyes; then
1979                                 tm_file="${tm_file} sh/newlib.h"
1980                         fi
1981                         tm_file="${tm_file} sh/embed-elf.h" ;;
1982         esac
1983         case ${target} in
1984         sh5*-*-netbsd*)
1985                 # SHmedia, 32-bit ABI
1986                 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd"
1987                 ;;
1988         sh64*-netbsd*)
1989                 # SHmedia, 64-bit ABI
1990                 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd sh/t-netbsd-sh5-64"
1991                 ;;
1992         *-*-netbsd)
1993                 tmake_file="${tmake_file} sh/t-netbsd"
1994                 ;;
1995         sh64*-*-linux*)
1996                 tmake_file="${tmake_file} sh/t-sh64 sh/t-linux64"
1997                 tm_file="${tm_file} sh/sh64.h"
1998                 extra_headers="shmedia.h ushmedia.h sshmedia.h"
1999                 ;;
2000         sh64*)
2001                 tmake_file="${tmake_file} sh/t-sh64"
2002                 tm_file="${tm_file} sh/sh64.h"
2003                 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2004                 ;;
2005         *-*-symbianelf*)
2006                 tmake_file="sh/t-symbian"
2007                 tm_file="sh/symbian-pre.h sh/little.h ${tm_file} sh/symbian-post.h"
2008                 extra_objs="symbian.o"
2009                 extra_parts="crt1.o crti.o crtn.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
2010                 ;;
2011         esac
2012         # sed el/eb endian suffixes away to avoid confusion with sh[23]e
2013         case `echo ${target} | sed 's/e[lb]-/-/'` in
2014         sh64*-*-netbsd*)        sh_cpu_target=sh5-64media ;;
2015         sh64* | sh5*-*-netbsd*) sh_cpu_target=sh5-32media ;;
2016         sh4a_single_only*)      sh_cpu_target=sh4a-single-only ;;
2017         sh4a_single*)           sh_cpu_target=sh4a-single ;;
2018         sh4a_nofpu*)            sh_cpu_target=sh4a-nofpu ;;
2019         sh4al)                  sh_cpu_target=sh4al ;;
2020         sh4a*)                  sh_cpu_target=sh4a ;;
2021         sh4_single_only*)       sh_cpu_target=sh4-single-only ;;
2022         sh4_single*)            sh_cpu_target=sh4-single ;;
2023         sh4_nofpu*)             sh_cpu_target=sh4-nofpu ;;
2024         sh4* | sh-superh-*)     sh_cpu_target=sh4 ;;
2025         sh3e*)                  sh_cpu_target=sh3e ;;
2026         sh*-*-netbsd* | sh3*)   sh_cpu_target=sh3 ;;
2027         sh2a_single_only*)      sh_cpu_target=sh2a-single-only ;;
2028         sh2a_single*)           sh_cpu_target=sh2a-single ;;
2029         sh2a_nofpu*)            sh_cpu_target=sh2a-nofpu ;;
2030         sh2a*)                  sh_cpu_target=sh2a ;;
2031         sh2e*)                  sh_cpu_target=sh2e ;;
2032         sh2*)                   sh_cpu_target=sh2 ;;
2033         *)                      sh_cpu_target=sh1 ;;
2034         esac
2035         # did the user say --without-fp ?
2036         if test x$with_fp = xno; then
2037                 case ${sh_cpu_target} in
2038                 sh5-*media)     sh_cpu_target=${sh_cpu_target}-nofpu ;;
2039                 sh4al | sh1)    ;;
2040                 sh4a* )         sh_cpu_target=sh4a-nofpu ;;
2041                 sh4*)           sh_cpu_target=sh4-nofpu ;;
2042                 sh3*)           sh_cpu_target=sh3 ;;
2043                 sh2a*)          sh_cpu_target=sh2a-nofpu ;;
2044                 sh2*)           sh_cpu_target=sh2 ;;
2045                 *)      echo --without-fp not available for $target: ignored
2046                 esac
2047                 tm_defines="$tm_defines STRICT_NOFPU=1"
2048         fi
2049         sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`"
2050         case $sh_cpu_default in
2051         sh5-64media-nofpu | sh5-64media | \
2052           sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \
2053           sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
2054           sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
2055           sh4-single-only | sh4-single | sh4-nofpu | sh4 | sh4-300 | \
2056           sh3e | sh3 | sh2e | sh2 | sh1) ;;
2057         "")     sh_cpu_default=${sh_cpu_target} ;;
2058         *)      echo "with_cpu=$with_cpu not supported"; exit 1 ;;
2059         esac
2060         sh_multilibs=${with_multilib_list}
2061         if test x${sh_multilibs} = x ; then
2062                 case ${target} in
2063                 sh64-superh-linux* | \
2064                 sh[1234]*)      sh_multilibs=${sh_cpu_target} ;;
2065                 sh64* | sh5*)   sh_multilibs=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu ;;
2066                 sh-superh-*)    sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;;
2067                 sh*-*-linux*)   sh_multilibs=m1,m3e,m4 ;;
2068                 sh*-*-netbsd*)  sh_multilibs=m3,m3e,m4 ;;
2069                 *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;;
2070                 esac
2071                 if test x$with_fp = xno; then
2072                         sh_multilibs="`echo $sh_multilibs|sed -e s/m4/sh4-nofpu/ -e s/,m4-[^,]*//g -e s/,m[23]e// -e s/m2a,m2a-single/m2a-nofpu/ -e s/m5-..m....,//g`"
2073                 fi
2074         fi
2075         target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`
2076         tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"'
2077         sh_multilibs=`echo $sh_multilibs,$sh_cpu_default | sed -e 's/[  ,/][    ,]*/ /g' -e 's/ $//' -e 's/^m/sh/' -e 's/ m/ sh/g' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-`
2078         for sh_multilib in ${sh_multilibs}; do
2079                 case ${sh_multilib} in
2080                 sh1 | sh2 | sh2e | sh3 | sh3e | \
2081                 sh4 | sh4-single | sh4-single-only | sh4-nofpu | sh4-300 |\
2082                 sh4a | sh4a-single | sh4a-single-only | sh4a-nofpu | sh4al | \
2083                 sh2a | sh2a-single | sh2a-single-only | sh2a-nofpu | \
2084                 sh5-64media | sh5-64media-nofpu | \
2085                 sh5-32media | sh5-32media-nofpu | \
2086                 sh5-compact | sh5-compact-nofpu)
2087                         tmake_file="${tmake_file} sh/t-mlib-${sh_multilib}"
2088                         tm_defines="$tm_defines SUPPORT_`echo $sh_multilib|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
2089                         ;;
2090                 *)
2091                         echo "with_multilib_list=${sh_multilib} not supported."
2092                         exit 1
2093                         ;;
2094                 esac
2095         done
2096         if test x${enable_incomplete_targets} = xyes ; then
2097                 tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1"
2098         fi
2099         ;;
2100 sh-*-rtems*)
2101         tmake_file="sh/t-sh sh/t-elf t-rtems sh/t-rtems"
2102         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h"
2103         ;;
2104 sh-wrs-vxworks)
2105         tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks"
2106         tm_file="${tm_file} elfos.h svr4.h sh/elf.h sh/embed-elf.h vx-common.h vxworks.h sh/vxworks.h"
2107         ;;
2108 sh-*-*)
2109         tm_file="${tm_file} dbxcoff.h sh/coff.h"
2110         ;;
2111 sparc-*-netbsdelf*)
2112         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2113         extra_options="${extra_options} sparc/long-double-switch.opt"
2114         ;;
2115 sparc64-*-openbsd*)
2116         tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h"
2117         extra_options="${extra_options} sparc/little-endian.opt"
2118         gas=yes gnu_ld=yes
2119         with_cpu=ultrasparc
2120         ;;
2121 sparc-*-elf*)
2122         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h"
2123         tmake_file="sparc/t-elf sparc/t-crtfm"
2124         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2125         ;;
2126 sparc-*-linux*)         # SPARC's running GNU/Linux, libc6
2127         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h linux.h"
2128         extra_options="${extra_options} sparc/long-double-switch.opt"
2129         tmake_file="${tmake_file} sparc/t-linux"
2130         if test x$enable_targets = xall; then
2131                 tm_file="sparc/biarch64.h ${tm_file} sparc/linux64.h"
2132                 tmake_file="${tmake_file} sparc/t-linux64"
2133         else
2134                 tm_file="${tm_file} sparc/linux.h"
2135         fi
2136         tmake_file="${tmake_file} sparc/t-crtfm"
2137         ;;
2138 sparc-*-rtems*)
2139         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h"
2140         tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
2141         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2142         ;;
2143 sparc64-*-solaris2* | sparcv9-*-solaris2*)
2144         tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
2145         case ${target} in
2146         *-*-solaris2.1[0-9]*)
2147                 tm_file="${tm_file} sol2-10.h"
2148                 ;;
2149         esac
2150         tm_file="${tm_file} sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h"
2151         if test x$gnu_ld = xyes; then
2152                 tm_file="${tm_file} sparc/sol2-gld.h sparc/sol2-gld-bi.h"
2153         fi
2154         if test x$gas = xyes; then
2155                 tm_file="${tm_file} sparc/sol2-gas.h sparc/sol2-gas-bi.h"
2156         fi
2157         tm_file="${tm_file} tm-dwarf2.h"
2158         tmake_file="t-sol2 sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm"
2159         if test x$gnu_ld = xyes; then
2160                 tmake_file="$tmake_file t-slibgcc-elf-ver"
2161         else
2162                 tmake_file="$tmake_file t-slibgcc-sld"
2163         fi
2164         c_target_objs="sol2-c.o"
2165         cxx_target_objs="sol2-c.o"
2166         extra_objs="sol2.o"
2167         tm_p_file="${tm_p_file} sol2-protos.h"
2168         extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o"
2169         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2170           "":yes:* | yes:yes:* ) thread_file=posix ;;
2171           "":*:yes | yes:*:yes ) thread_file=solaris ;;
2172         esac
2173         ;;
2174 sparc-*-solaris2*)
2175         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
2176         case ${target} in
2177         *-*-solaris2.1[0-9]*)
2178                 tm_file="${tm_file} sol2-10.h"
2179                 ;;
2180         esac
2181         tm_file="${tm_file} sparc/sol2.h"
2182         if test x$gnu_ld = xyes; then
2183                 tm_file="${tm_file} sparc/sol2-gld.h"
2184         fi
2185         if test x$gas = xyes; then
2186                 tm_file="${tm_file} sparc/sol2-gas.h"
2187         fi
2188         tmake_file="t-sol2 sparc/t-sol2 sparc/t-crtfm"
2189         if test x$gnu_ld = xyes; then
2190                 tmake_file="$tmake_file t-slibgcc-elf-ver"
2191         else
2192                 tmake_file="$tmake_file t-slibgcc-sld"
2193         fi
2194         tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h"
2195         if test x$gnu_ld = xyes; then
2196                 tm_file="${tm_file} sparc/sol2-gld-bi.h"
2197         fi
2198         if test x$gas = xyes; then
2199                 tm_file="${tm_file} sparc/sol2-gas-bi.h"
2200         fi
2201         tm_file="${tm_file} tm-dwarf2.h"
2202         tmake_file="$tmake_file sparc/t-sol2-64"
2203         test x$with_cpu != x || with_cpu=v9
2204         c_target_objs="sol2-c.o"
2205         cxx_target_objs="sol2-c.o"
2206         extra_objs="sol2.o"
2207         tm_p_file="${tm_p_file} sol2-protos.h"
2208         extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
2209         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2210           "":yes:* | yes:yes:* )
2211                 thread_file=posix
2212                 ;;
2213           "":*:yes | yes:*:yes )
2214                 thread_file=solaris
2215                 ;;
2216         esac
2217         ;;
2218 sparc-wrs-vxworks)
2219         tm_file="${tm_file} elfos.h svr4.h sparc/sysv4.h vx-common.h vxworks.h sparc/vxworks.h"
2220         tmake_file="${tmake_file} sparc/t-vxworks"
2221         ;;
2222 sparc64-*-elf*)
2223         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h"
2224         extra_options="${extra_options} sparc/little-endian.opt"
2225         tmake_file="${tmake_file} sparc/t-crtfm"
2226         extra_parts="crtbegin.o crtend.o"
2227         ;;
2228 sparc64-*-freebsd*|ultrasparc-*-freebsd*)
2229         tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
2230         extra_options="${extra_options} sparc/long-double-switch.opt"
2231         tmake_file="${tmake_file} sparc/t-crtfm"
2232         case "x$with_cpu" in
2233                 xultrasparc) ;;
2234                 x) with_cpu=ultrasparc ;;
2235                 *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
2236         esac
2237         ;;
2238 sparc64-*-linux*)               # 64-bit SPARC's running GNU/Linux
2239         tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h linux.h sparc/linux64.h"
2240         extra_options="${extra_options} sparc/long-double-switch.opt"
2241         tmake_file="${tmake_file} sparc/t-linux sparc/t-linux64 sparc/t-crtfm"
2242         ;;
2243 sparc64-*-netbsd*)
2244         tm_file="sparc/biarch64.h ${tm_file}"
2245         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2246         extra_options="${extra_options} sparc/long-double-switch.opt"
2247         tmake_file="${tmake_file} sparc/t-netbsd64"
2248         ;;
2249 spu-*-elf*)
2250         tm_file="dbxelf.h elfos.h spu/spu-elf.h spu/spu.h"
2251         tmake_file="spu/t-spu-elf"
2252         extra_headers="spu_intrinsics.h spu_internals.h vmx2spu.h spu_mfcio.h vec_types.h"
2253         extra_modes=spu/spu-modes.def
2254         c_target_objs="${c_target_objs} spu-c.o"
2255         cxx_target_objs="${cxx_target_objs} spu-c.o"
2256         ;;
2257 v850e1-*-*)
2258         target_cpu_default="TARGET_CPU_v850e1"
2259         tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
2260         tm_p_file=v850/v850-protos.h
2261         tmake_file=v850/t-v850e
2262         md_file=v850/v850.md
2263         out_file=v850/v850.c
2264         extra_options="${extra_options} v850/v850.opt"
2265         if test x$stabs = xyes
2266         then
2267                 tm_file="${tm_file} dbx.h"
2268         fi
2269         use_collect2=no
2270         c_target_objs="v850-c.o"
2271         cxx_target_objs="v850-c.o"
2272         ;;
2273 v850e-*-*)
2274         target_cpu_default="TARGET_CPU_v850e"
2275         tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
2276         tm_p_file=v850/v850-protos.h
2277         tmake_file=v850/t-v850e
2278         md_file=v850/v850.md
2279         out_file=v850/v850.c
2280         extra_options="${extra_options} v850/v850.opt"
2281         if test x$stabs = xyes
2282         then
2283                 tm_file="${tm_file} dbx.h"
2284         fi
2285         use_collect2=no
2286         c_target_objs="v850-c.o"
2287         cxx_target_objs="v850-c.o"
2288         ;;
2289 v850-*-*)
2290         target_cpu_default="TARGET_CPU_generic"
2291         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
2292         tmake_file=v850/t-v850
2293         if test x$stabs = xyes
2294         then
2295                 tm_file="${tm_file} dbx.h"
2296         fi
2297         use_collect2=no
2298         c_target_objs="v850-c.o"
2299         cxx_target_objs="v850-c.o"
2300         ;;
2301 vax-*-netbsdelf*)
2302         tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
2303         ;;
2304 vax-*-netbsd*)
2305         tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h"
2306         tmake_file=t-netbsd
2307         extra_parts=""
2308         use_collect2=yes
2309         ;;
2310 vax-*-openbsd*)
2311         tm_file="vax/vax.h vax/openbsd1.h openbsd.h vax/openbsd.h"
2312         use_collect2=yes
2313         ;;
2314 xstormy16-*-elf)
2315         # For historical reasons, the target files omit the 'x'.
2316         tm_file="dbxelf.h elfos.h svr4.h stormy16/stormy16.h"
2317         tm_p_file=stormy16/stormy16-protos.h
2318         md_file=stormy16/stormy16.md
2319         out_file=stormy16/stormy16.c
2320         extra_options=stormy16/stormy16.opt
2321         tmake_file="stormy16/t-stormy16"
2322         extra_parts="crtbegin.o crtend.o"
2323         ;;
2324 xtensa-*-elf*)
2325         tm_file="${tm_file} dbxelf.h elfos.h svr4.h xtensa/elf.h"
2326         tmake_file="xtensa/t-xtensa xtensa/t-elf"
2327         ;;
2328 xtensa-*-linux*)
2329         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h xtensa/linux.h"
2330         tmake_file="${tmake_file} xtensa/t-xtensa xtensa/t-linux"
2331         ;;
2332 am33_2.0-*-linux*)
2333         tm_file="mn10300/mn10300.h dbxelf.h elfos.h linux.h mn10300/linux.h"
2334         tmake_file="${tmake_file} mn10300/t-linux"
2335         gas=yes gnu_ld=yes
2336         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
2337         use_collect2=no
2338         ;;
2339 m32c-*-elf*)
2340         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
2341         c_target_objs="m32c-pragma.o"
2342         cxx_target_objs="m32c-pragma.o"
2343         ;;
2344 *)
2345         echo "*** Configuration ${target} not supported" 1>&2
2346         exit 1
2347         ;;
2348 esac
2349
2350 case ${target} in
2351 i[34567]86-*-linux* | x86_64-*-linux*)
2352         tmake_file="${tmake_file} i386/t-pmm_malloc"
2353         ;;
2354 i[34567]86-*-* | x86_64-*-*)
2355         tmake_file="${tmake_file} i386/t-gmm_malloc"
2356         ;;
2357 esac
2358
2359 # Support for --with-cpu and related options (and a few unrelated options,
2360 # too).
2361 case ${with_cpu} in
2362   yes | no)
2363     echo "--with-cpu must be passed a value" 1>&2
2364     exit 1
2365     ;;
2366 esac
2367
2368 # If there is no $with_cpu option, try to infer one from ${target}.
2369 # This block sets nothing except for with_cpu.
2370 if test x$with_cpu = x ; then
2371   case ${target} in
2372     i386-*-*)
2373       with_cpu=i386
2374       ;;
2375     i486-*-*)
2376       with_cpu=i486
2377       ;;
2378     i586-*-*)
2379       case ${target_noncanonical} in
2380         k6_2-*)
2381           with_cpu=k6-2
2382           ;;
2383         k6_3-*)
2384           with_cpu=k6-3
2385           ;;
2386         k6-*)
2387           with_cpu=k6
2388           ;;
2389         pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
2390           with_cpu=pentium-mmx
2391           ;;
2392         *)
2393           with_cpu=pentium
2394           ;;
2395       esac
2396       ;;
2397     i686-*-* | i786-*-*)
2398       case ${target_noncanonical} in
2399         amdfam10-*|barcelona-*)
2400           with_cpu=amdfam10
2401           ;;
2402         k8-*|opteron-*|athlon_64-*)
2403           with_cpu=k8
2404           ;;
2405         athlon_xp-*|athlon_mp-*|athlon_4-*)
2406           with_cpu=athlon-4
2407           ;;
2408         athlon_tbird-*|athlon-*)
2409           with_cpu=athlon
2410           ;;
2411         geode-*)
2412           with_cpu=geode
2413           ;;
2414         pentium2-*)
2415           with_cpu=pentium2
2416           ;;
2417         pentium3-*|pentium3m-*)
2418           with_cpu=pentium3
2419           ;;
2420         pentium4-*|pentium4m-*)
2421           with_cpu=pentium4
2422           ;;
2423         prescott-*)
2424           with_cpu=prescott
2425           ;;
2426         nocona-*)
2427           with_cpu=nocona
2428           ;;
2429         core2-*)
2430           with_cpu=core2
2431           ;;
2432         pentium_m-*)
2433           with_cpu=pentium-m
2434           ;;
2435         pentiumpro-*)
2436           with_cpu=pentiumpro
2437           ;;
2438         *)
2439           with_cpu=generic
2440           ;;
2441       esac
2442       ;;
2443     x86_64-*-*)
2444       case ${target_noncanonical} in
2445         amdfam10-*|barcelona-*)
2446           with_cpu=amdfam10
2447           ;;
2448         k8-*|opteron-*|athlon_64-*)
2449           with_cpu=k8
2450           ;;
2451         nocona-*)
2452           with_cpu=nocona
2453           ;;
2454         core2-*)
2455           with_cpu=core2
2456           ;;
2457         *)
2458           with_cpu=generic
2459           ;;
2460       esac
2461       ;;
2462     alphaev6[78]*-*-*)
2463       with_cpu=ev67
2464       ;;
2465     alphaev6*-*-*)
2466       with_cpu=ev6
2467       ;;
2468     alphapca56*-*-*)
2469       with_cpu=pca56
2470       ;;
2471     alphaev56*-*-*)
2472       with_cpu=ev56
2473       ;;
2474     alphaev5*-*-*)
2475       with_cpu=ev5
2476       ;;
2477     frv-*-*linux* | frv400-*-*linux*)
2478       with_cpu=fr400
2479       ;;
2480     frv550-*-*linux*)
2481       with_cpu=fr550
2482       ;;
2483     m68k*-*-*)
2484       case "$with_arch" in
2485         "cf")
2486           with_cpu=${default_cf_cpu}
2487           ;;
2488         "" | "m68k")
2489           with_cpu=m${default_m68k_cpu}
2490           ;;
2491       esac
2492       ;;
2493     mips*-*-vxworks)
2494       with_arch=mips2
2495       ;;
2496     sparc*-*-*)
2497       with_cpu="`echo ${target} | sed 's/-.*$//'`"
2498       ;;
2499   esac
2500
2501   # Avoid overriding --with-cpu-32 and --with-cpu-64 values.
2502   case ${target} in
2503     i[34567]86-*-*|x86_64-*-*)
2504       if test x$with_cpu != x; then
2505         if test x$with_cpu_32 != x || test x$with_cpu_64 != x; then
2506           if test x$with_cpu_32 = x; then
2507             with_cpu_32=$with_cpu
2508           fi
2509           if test x$with_cpu_64 = x; then
2510             with_cpu_64=$with_cpu
2511           fi
2512           with_cpu=
2513         fi
2514       fi
2515       ;;
2516   esac
2517 fi
2518
2519 # Similarly for --with-schedule.
2520 if test x$with_schedule = x; then
2521         case ${target} in
2522         hppa1*)
2523                 # Override default PA8000 scheduling model.
2524                 with_schedule=7100LC
2525                 ;;
2526         esac
2527 fi
2528
2529 # Validate and mark as valid any --with options supported
2530 # by this target.  In order to use a particular --with option
2531 # you must list it in supported_defaults; validating the value
2532 # is optional.  This case statement should set nothing besides
2533 # supported_defaults.
2534
2535 supported_defaults=
2536 case "${target}" in
2537         alpha*-*-*)
2538                 supported_defaults="cpu tune"
2539                 for which in cpu tune; do
2540                         eval "val=\$with_$which"
2541                         case "$val" in
2542                         "" \
2543                         | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \
2544                         | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \
2545                         | 21264a)
2546                                 ;;
2547                         *)
2548                                 echo "Unknown CPU used in --with-$which=$val" 1>&2
2549                                 exit 1
2550                                 ;;
2551                         esac
2552                 done
2553                 ;;
2554
2555         arm*-*-*)
2556                 supported_defaults="arch cpu float tune fpu abi mode"
2557                 for which in cpu tune; do
2558                         # See if it matches any of the entries in arm-cores.def
2559                         eval "val=\$with_$which"
2560                         if [ x"$val" = x ] \
2561                             || grep "^ARM_CORE(\"$val\"," \
2562                                     ${srcdir}/config/arm/arm-cores.def \
2563                                     > /dev/null; then
2564                           # Ok
2565                           new_val=`grep "^ARM_CORE(\"$val\"," \
2566                                 ${srcdir}/config/arm/arm-cores.def | \
2567                                 sed -e 's/^[^,]*,[      ]*//' | \
2568                                 sed -e 's/,.*$//'`
2569                           eval "target_${which}_cname=$new_val"
2570                         echo "For $val real value is $new_val"
2571                           true
2572                         else
2573                           echo "Unknown CPU used in --with-$which=$val" 1>&2
2574                           exit 1
2575                         fi
2576                 done
2577
2578                 case "$with_arch" in
2579                 "" \
2580                 | armv[23456] | armv2a | armv3m | armv4t | armv5t \
2581                 | armv5te | armv6j |armv6k | armv6z | armv6zk | armv6-m \
2582                 | armv7 | armv7-a | armv7-r | armv7-m \
2583                 | iwmmxt | ep9312)
2584                         # OK
2585                         ;;
2586                 *)
2587                         echo "Unknown arch used in --with-arch=$with_arch" 1>&2
2588                         exit 1
2589                         ;;
2590                 esac
2591
2592                 case "$with_float" in
2593                 "" \
2594                 | soft | hard | softfp)
2595                         # OK
2596                         ;;
2597                 *)
2598                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2599                         exit 1
2600                         ;;
2601                 esac
2602
2603                 case "$with_fpu" in
2604                 "" \
2605                 | fpa | fpe2 | fpe3 | maverick | vfp | vfp3 | neon )
2606                         # OK
2607                         ;;
2608                 *)
2609                         echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1
2610                         exit 1
2611                         ;;
2612                 esac
2613
2614                 case "$with_abi" in
2615                 "" \
2616                 | apcs-gnu | atpcs | aapcs | iwmmxt )
2617                         #OK
2618                         ;;
2619                 *)
2620                         echo "Unknown ABI used in --with-abi=$with_abi"
2621                         exit 1
2622                         ;;
2623                 esac
2624
2625                 case "$with_mode" in
2626                 "" \
2627                 | arm | thumb )
2628                         #OK
2629                         ;;
2630                 *)
2631                         echo "Unknown mode used in --with-mode=$with_mode"
2632                         exit 1
2633                         ;;
2634                 esac
2635
2636                 if test "x$with_arch" != x && test "x$with_cpu" != x; then
2637                         echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2
2638                 fi
2639                 ;;
2640
2641         fr*-*-*linux*)
2642                 supported_defaults=cpu
2643                 case "$with_cpu" in
2644                 fr400) ;;
2645                 fr550) ;;
2646                 *)
2647                         echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
2648                         exit 1
2649                         ;;
2650                 esac
2651                 ;;
2652
2653         fido-*-* | m68k*-*-*)
2654                 supported_defaults="arch cpu"
2655                 case "$with_arch" in
2656                 "" | "m68k"| "cf")
2657                         m68k_arch_family="$with_arch"
2658                         ;;
2659                 *)
2660                         echo "Invalid --with-arch=$with_arch" 1>&2
2661                         exit 1
2662                         ;;
2663                 esac
2664
2665                 # We always have a $with_cpu setting here.
2666                 case "$with_cpu" in
2667                 "m68000" | "m68010" | "m68020" | "m68030" | "m68040" | "m68060")
2668                         m68k_cpu_ident=$with_cpu
2669                         ;;
2670                 "m68020-40")
2671                         m68k_cpu_ident=m68020
2672                         tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_40"
2673                         ;;
2674                 "m68020-60")
2675                         m68k_cpu_ident=m68020
2676                         tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_60"
2677                         ;;
2678                 *)
2679                         # We need the C identifier rather than the string.
2680                         m68k_cpu_ident=`awk -v arg="\"$with_cpu\"" \
2681                            'BEGIN { FS="[ \t]*[,()][ \t]*" }; \
2682                             $1 == "M68K_DEVICE" && $2 == arg { print $3 }' \
2683                                  ${srcdir}/config/m68k/m68k-devices.def`
2684                         if [ x"$m68k_cpu_ident" = x ] ; then
2685                                 echo "Unknown CPU used in --with-cpu=$with_cpu" 1>&2
2686                                 exit 1
2687                         fi
2688                         with_cpu="mcpu=$with_cpu"
2689                         ;;
2690                 esac
2691                 ;;
2692
2693         hppa*-*-*)
2694                 supported_defaults="arch schedule"
2695
2696                 case "$with_arch" in
2697                 "" | 1.0 | 1.1 | 2.0)
2698                         # OK
2699                         ;;
2700                 *)
2701                         echo "Unknown architecture used in --with-arch=$with_arch" 1>&2
2702                         exit 1
2703                         ;;
2704                 esac
2705
2706                 case "$with_schedule" in
2707                 "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000)
2708                         # OK
2709                         ;;
2710                 *)
2711                         echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2
2712                         exit 1
2713                         ;;
2714                 esac
2715                 ;;
2716
2717         i[34567]86-*-* | x86_64-*-*)
2718                 supported_defaults="arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64"
2719                 for which in arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64; do
2720                         eval "val=\$with_$which"
2721                         case ${val} in
2722                         i386 | i486 \
2723                         | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \
2724                         | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
2725                         | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
2726                         | athlon-4 | athlon-xp | athlon-mp | geode \
2727                         | prescott | pentium-m | pentium4m | pentium3m)
2728                                 case "${target}" in
2729                                   x86_64-*-*)
2730                                       case "x$which" in
2731                                         *_32)
2732                                                 ;;
2733                                         *)
2734                                                 echo "CPU given in --with-$which=$val doesn't support 64bit mode." 1>&2
2735                                                 exit 1
2736                                                 ;;
2737                                       esac
2738                                       ;;
2739                                 esac
2740                                 # OK
2741                                 ;;
2742                         "" | amdfam10 | barcelona | k8 | opteron | athlon64 | athlon-fx | nocona | core2 | generic)
2743                                 # OK
2744                                 ;;
2745                         *)
2746                                 echo "Unknown CPU given in --with-$which=$val." 1>&2
2747                                 exit 1
2748                                 ;;
2749                         esac
2750                 done
2751                 ;;
2752
2753         mips*-*-*)
2754                 supported_defaults="abi arch float tune divide llsc"
2755
2756                 case ${with_float} in
2757                 "" | soft | hard)
2758                         # OK
2759                         ;;
2760                 *)
2761                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2762                         exit 1
2763                         ;;
2764                 esac
2765
2766                 case ${with_abi} in
2767                 "" | 32 | o64 | n32 | 64 | eabi)
2768                         # OK
2769                         ;;
2770                 *)
2771                         echo "Unknown ABI used in --with-abi=$with_abi" 1>&2
2772                         exit 1
2773                         ;;
2774                 esac
2775
2776                 case ${with_divide} in
2777                 "" | breaks | traps)
2778                         # OK
2779                         ;;
2780                 *)
2781                         echo "Unknown division check type use in --with-divide=$with_divide" 1>&2
2782                         exit 1
2783                         ;;
2784                 esac
2785
2786                 case ${with_llsc} in
2787                 yes)
2788                         with_llsc=llsc
2789                         ;;
2790                 no)
2791                         with_llsc="no-llsc"
2792                         ;;
2793                 "")
2794                         # OK
2795                         ;;
2796                 *)
2797                         echo "Unknown llsc type used in --with-llsc" 1>&2
2798                         exit 1
2799                         ;;
2800                 esac
2801                 ;;
2802
2803         powerpc*-*-* | rs6000-*-*)
2804                 supported_defaults="cpu float tune"
2805
2806                 for which in cpu tune; do
2807                         eval "val=\$with_$which"
2808                         case ${val} in
2809                         default32 | default64)
2810                                 with_which="with_$which"
2811                                 eval $with_which=
2812                                 ;;
2813                         405cr)
2814                                 tm_defines="${tm_defines} CONFIG_PPC405CR"
2815                                 eval "with_$which=405"
2816                                 ;;
2817                         "" | common \
2818                         | power | power[23456] | power6x | powerpc | powerpc64 \
2819                         | rios | rios1 | rios2 | rsc | rsc1 | rs64a \
2820                         | 401 | 403 | 405 | 405fp | 440 | 440fp | 464 | 464fp \
2821                         | 505 | 601 | 602 | 603 | 603e | ec603e | 604 \
2822                         | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
2823                         | e300c[23] | 854[08] | e500mc \
2824                         | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5 | cell)
2825                                 # OK
2826                                 ;;
2827                         *)
2828                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
2829                                 exit 1
2830                                 ;;
2831                         esac
2832                 done
2833                 ;;
2834
2835         s390*-*-*)
2836                 supported_defaults="arch mode tune"
2837
2838                 for which in arch tune; do
2839                         eval "val=\$with_$which"
2840                         case ${val} in
2841                         "" | g5 | g6 | z900 | z990 | z9-109 | z9-ec | z10)
2842                                 # OK
2843                                 ;;
2844                         *)
2845                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
2846                                 exit 1
2847                                 ;;
2848                         esac
2849                 done
2850
2851                 case ${with_mode} in
2852                 "" | esa | zarch)
2853                         # OK
2854                         ;;
2855                 *)
2856                         echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2
2857                         exit 1
2858                         ;;
2859                 esac
2860                 ;;
2861
2862         sh[123456ble]-*-* | sh-*-*)
2863                 supported_defaults="cpu"
2864                 case "`echo $with_cpu | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz- | sed s/sh/m/`" in
2865                 "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu )
2866                         # OK
2867                         ;;
2868                 m2a | m2a-single | m2a-single-only | m2a-nofpu)
2869                         ;;
2870                 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al)
2871                         ;;
2872                 *)
2873                         echo "Unknown CPU used in --with-cpu=$with_cpu, known values:"  1>&2
2874                         echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2
2875                         echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2
2876                         echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2
2877                         exit 1
2878                         ;;
2879                 esac
2880                 ;;
2881         sparc*-*-*)
2882                 supported_defaults="cpu float tune"
2883
2884                 for which in cpu tune; do
2885                         eval "val=\$with_$which"
2886                         case ${val} in
2887                         "" | sparc | sparcv9 | sparc64 | sparc86x \
2888                         | v7 | cypress | v8 | supersparc | sparclite | f930 \
2889                         | f934 | hypersparc | sparclite86x | sparclet | tsc701 \
2890                         | v9 | ultrasparc | ultrasparc3 | niagara | niagara2)
2891                                 # OK
2892                                 ;;
2893                         *)
2894                                 echo "Unknown cpu used in --with-$which=$val" 1>&2
2895                                 exit 1
2896                                 ;;
2897                         esac
2898                 done
2899
2900                 case ${with_float} in
2901                 "" | soft | hard)
2902                         # OK
2903                         ;;
2904                 *)
2905                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2906                         exit 1
2907                         ;;
2908                 esac
2909                 ;;
2910
2911         spu-*-*)
2912                 supported_defaults="arch tune"
2913
2914                 for which in arch tune; do
2915                         eval "val=\$with_$which"
2916                         case ${val} in
2917                         "" | cell | celledp)
2918                                 # OK
2919                                 ;;
2920                         *)
2921                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
2922                                 exit 1
2923                                 ;;
2924                         esac
2925                 done
2926                 ;;
2927
2928         v850*-*-*)
2929                 supported_defaults=cpu
2930                 case ${with_cpu} in
2931                 "" | v850e | v850e1)
2932                         # OK
2933                         ;;
2934                 *)
2935                         echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
2936                         exit 1
2937                         ;;
2938                 esac
2939                 ;;
2940 esac
2941
2942 # Set some miscellaneous flags for particular targets.
2943 target_cpu_default2=
2944 case ${target} in
2945         alpha*-*-*)
2946                 if test x$gas = xyes
2947                 then
2948                         target_cpu_default2="MASK_GAS"
2949                 fi
2950                 ;;
2951
2952         arm*-*-*)
2953                 if test x$target_cpu_cname = x
2954                 then
2955                         target_cpu_default2=TARGET_CPU_generic
2956                 else
2957                         target_cpu_default2=TARGET_CPU_$target_cpu_cname
2958                 fi
2959                 ;;
2960
2961         hppa*-*-*)
2962                 target_cpu_default2="MASK_BIG_SWITCH"
2963                 if test x$gas = xyes
2964                 then
2965                         target_cpu_default2="${target_cpu_default2}|MASK_GAS|MASK_JUMP_IN_DELAY"
2966                 fi
2967                 ;;
2968
2969         fido*-*-* | m68k*-*-*)
2970                 target_cpu_default2=$m68k_cpu_ident
2971                 if [ x"$m68k_arch_family" != x ]; then
2972                         tmake_file="m68k/t-$m68k_arch_family $tmake_file"
2973                 fi
2974                 ;;
2975
2976         i[34567]86-*-darwin* | x86_64-*-darwin*)
2977                 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
2978                 ;;
2979         i[34567]86-*-linux* | x86_64-*-linux*)
2980                 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp i386/t-linux"
2981                 ;;
2982
2983         mips*-*-*)
2984                 if test x$gnu_ld = xyes
2985                 then
2986                         target_cpu_default2="MASK_SPLIT_ADDRESSES"
2987                 fi
2988                 case ${target} in
2989                         mips*el-*-*)
2990                                 tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
2991                                 ;;
2992                 esac
2993                 if test "x$enable_gofast" = xyes
2994                 then
2995                         tm_defines="US_SOFTWARE_GOFAST $tm_defines"
2996                         tmake_file="mips/t-gofast $tmake_file"
2997                 else
2998                         tmake_file="mips/t-mips $tmake_file"
2999                 fi
3000                 ;;
3001
3002         powerpc*-*-* | rs6000-*-*)
3003                 # FIXME: The PowerPC port uses the value set at compile time,
3004                 # although it's only cosmetic.
3005                 if test "x$with_cpu" != x
3006                 then
3007                         target_cpu_default2="\\\"$with_cpu\\\""
3008                 fi
3009                 out_file=rs6000/rs6000.c
3010                 c_target_objs="${c_target_objs} rs6000-c.o"
3011                 cxx_target_objs="${cxx_target_objs} rs6000-c.o"
3012                 tmake_file="rs6000/t-rs6000 ${tmake_file}"
3013
3014                 if test x$enable_e500_double = xyes
3015                 then
3016                         tm_file="$tm_file rs6000/e500-double.h"
3017                 fi
3018                 ;;
3019
3020         sh[123456ble]*-*-* | sh-*-*)
3021                 c_target_objs="${c_target_objs} sh-c.o"
3022                 cxx_target_objs="${cxx_target_objs} sh-c.o"
3023                 ;;
3024
3025         sparc*-*-*)
3026                 # Some standard aliases.
3027                 case x$with_cpu in
3028                 xsparc)
3029                         with_cpu=v7
3030                         ;;
3031                 xsparcv9 | xsparc64)
3032                         with_cpu=v9
3033                         ;;
3034                 esac
3035
3036                 # The SPARC port checks this value at compile-time.
3037                 target_cpu_default2="TARGET_CPU_$with_cpu"
3038                 ;;
3039         v850*-*-*)
3040                 # FIXME: The v850 is "special" in that it does not support
3041                 # runtime CPU selection, only --with-cpu.
3042                 case "x$with_cpu" in
3043                 x)
3044                         ;;
3045                 xv850e)
3046                         target_cpu_default2="TARGET_CPU_$with_cpu"
3047                         ;;
3048                 esac
3049                 ;;
3050 esac
3051
3052 t=
3053 all_defaults="abi cpu cpu_32 cpu_64 arch arch_32 arch_64 tune tune_32 tune_64 schedule float mode fpu divide llsc"
3054 for option in $all_defaults
3055 do
3056         eval "val=\$with_$option"
3057         if test -n "$val"; then
3058                 case " $supported_defaults " in
3059                 *" $option "*)
3060                         ;;
3061                 *)
3062                         echo "This target does not support --with-$option." 2>&1
3063                         echo "Valid --with options are: $supported_defaults" 2>&1
3064                         exit 1
3065                         ;;
3066                 esac
3067
3068                 if test "x$t" = x
3069                 then
3070                         t="{ \"$option\", \"$val\" }"
3071                 else
3072                         t="${t}, { \"$option\", \"$val\" }"
3073                 fi
3074         fi
3075 done
3076
3077 if test "x$t" = x
3078 then
3079         configure_default_options="{ { NULL, NULL} }"
3080 else
3081         configure_default_options="{ ${t} }"
3082 fi
3083
3084 if test "$target_cpu_default2" != ""
3085 then
3086         if test "$target_cpu_default" != ""
3087         then
3088                 target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
3089         else
3090                 target_cpu_default=$target_cpu_default2
3091         fi
3092 fi