1 # GCC target-specific configuration file.
2 # Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
3 # 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc.
5 #This file is part of GCC.
7 #GCC is free software; you can redistribute it and/or modify it under
8 #the terms of the GNU General Public License as published by the Free
9 #Software Foundation; either version 3, or (at your option) any later
12 #GCC is distributed in the hope that it will be useful, but WITHOUT
13 #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 #FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
17 #You should have received a copy of the GNU General Public License
18 #along with GCC; see the file COPYING3. If not see
19 #<http://www.gnu.org/licenses/>.
21 # This is the GCC target-specific configuration file
22 # where a configuration type is mapped to different system-specific
23 # definitions and files. This is invoked by the autoconf-generated
24 # configure script. Putting it in a separate shell file lets us skip
25 # running autoconf when modifying target-specific information.
27 # When you change the cases in the OS or target switches, consider
28 # updating ../libgcc/config.host also.
30 # This file switches on the shell variable ${target}, and also uses the
31 # following shell variables:
33 # with_* Various variables as set by configure.
35 # enable_threads Either the name, yes or no depending on whether
36 # threads support was requested.
38 # default_use_cxa_atexit
39 # The default value for the $enable___cxa_atexit
40 # variable. enable___cxa_atexit needs to be set to
41 # "yes" for the correct operation of C++ destructors
42 # but it relies upon the presence of a non-standard C
43 # library function called __cxa_atexit.
44 # Since not all C libraries provide __cxa_atexit the
45 # default value of $default_use_cxa_atexit is set to
46 # "no" except for targets which are known to be OK.
48 # default_gnu_indirect_function
49 # The default value for the $enable_gnu_indirect_function
50 # variable. enable_gnu_indirect_function relies
51 # upon the presence of a non-standard gnu ifunc support
52 # in the assembler, linker and dynamic linker.
53 # Since not all libraries provide the dynamic linking
54 # support, the default value of
55 # $default_gnu_indirect_function is set to
56 # "no" except for targets which are known to be OK.
58 # gas_flag Either yes or no depending on whether GNU as was
61 # gnu_ld_flag Either yes or no depending on whether GNU ld was
64 # This file sets the following shell variables for use by the
65 # autoconf-generated configure script:
67 # cpu_type The name of the cpu, if different from the first
68 # chunk of the canonical target name.
70 # tm_defines List of target macros to define for all compilations.
72 # tm_file A list of target macro files, if different from
73 # "$cpu_type/$cpu_type.h". Usually it's constructed
74 # per target in a way like this:
75 # tm_file="${tm_file} dbxelf.h elfos.h ${cpu_type.h}/elf.h"
76 # Note that the preferred order is:
77 # - specific target header "${cpu_type}/${cpu_type.h}"
78 # - generic headers like dbxelf.h elfos.h, etc.
79 # - specializing target headers like ${cpu_type.h}/elf.h
80 # This helps to keep OS specific stuff out of the CPU
81 # defining header ${cpu_type}/${cpu_type.h}.
83 # It is possible to include automatically-generated
84 # build-directory files by prefixing them with "./".
85 # All other files should relative to $srcdir/config.
87 # tm_p_file Location of file with declarations for functions
90 # out_file The name of the machine description C support
91 # file, if different from "$cpu_type/$cpu_type.c".
93 # common_out_file The name of the source file for code shared between
94 # the compiler proper and the driver.
96 # md_file The name of the machine-description file, if
97 # different from "$cpu_type/$cpu_type.md".
99 # tmake_file A list of machine-description-specific
100 # makefile-fragments, if different from
101 # "$cpu_type/t-$cpu_type".
103 # extra_modes The name of the file containing a list of extra
104 # machine modes, if necessary and different from
105 # "$cpu_type/$cpu_type-modes.def".
107 # extra_objs List of extra objects that should be linked into
108 # the compiler proper (cc1, cc1obj, cc1plus)
109 # depending on target.
111 # extra_gcc_objs List of extra objects that should be linked into
112 # the compiler driver (gcc) depending on target.
114 # extra_headers List of used header files from the directory
115 # config/${cpu_type}.
117 # user_headers_inc_next_pre
118 # List of header file names of internal gcc header
119 # files, which should be prefixed by an include_next.
120 # user_headers_inc_next_post
121 # List of header file names of internal gcc header
122 # files, which should be postfixed by an include_next.
123 # use_gcc_tgmath If set, add tgmath.h to the list of used header
126 # use_gcc_stdint If "wrap", install a version of stdint.h that
127 # wraps the system's copy for hosted compilations;
128 # if "provide", provide a version of systems without
129 # such a system header; otherwise "none", do not
130 # provide such a header at all.
132 # extra_passes List of extra executables compiled for this target
133 # machine, used for compiling from source to object.
135 # extra_programs Like extra_passes, but these are used when linking.
137 # extra_options List of target-dependent .opt files.
139 # c_target_objs List of extra target-dependent objects that be
140 # linked into the C compiler only.
142 # cxx_target_objs List of extra target-dependent objects that be
143 # linked into the C++ compiler only.
145 # fortran_target_objs List of extra target-dependent objects that be
146 # linked into the fortran compiler only.
148 # target_gtfiles List of extra source files with type information.
150 # xm_defines List of macros to define when compiling for the
153 # xm_file List of files to include when compiling for the
156 # use_collect2 Set to yes or no, depending on whether collect2
159 # target_cpu_default Set to override the default target model.
161 # gdb_needs_out_file_path
162 # Set to yes if gdb needs a dir command with
163 # `dirname $out_file`.
165 # thread_file Set to control which thread package to use.
167 # gas Set to yes or no depending on whether the target
168 # system normally uses GNU as.
170 # need_64bit_hwint Set to yes if HOST_WIDE_INT must be 64 bits wide
171 # for this target. This is true if this target
172 # supports "long" or "wchar_t" wider than 32 bits,
173 # or BITS_PER_WORD is wider than 32 bits.
174 # The setting made here must match the one made in
175 # other locations such as libcpp/configure.ac
177 # configure_default_options
178 # Set to an initializer for configure_default_options
179 # in configargs.h, based on --with-cpu et cetera.
181 # native_system_header_dir
182 # Where system header files are found for this
183 # target. This defaults to /usr/include. If
184 # the --with-sysroot configure option or the
185 # --sysroot command line option is used this
186 # will be relative to the sysroot.
187 # target_type_format_char
188 # The default character to be used for formatting
190 # .type symbol_name, ${t_t_f_c}<property>
193 # The following variables are used in each case-construct to build up the
194 # outgoing variables:
196 # gnu_ld Set to yes or no depending on whether the target
197 # system normally uses GNU ld.
199 # target_has_targetcm Set to yes or no depending on whether the target
200 # has its own definition of targetcm.
202 # target_has_targetm_common Set to yes or no depending on whether the
203 # target has its own definition of targetm_common.
209 user_headers_inc_next_pre=
210 user_headers_inc_next_post=
221 target_has_targetcm=no
222 target_has_targetm_common=yes
225 # Set this to force installation and use of collect2.
227 # Set this to override the default target model.
229 # Set this if gdb needs a dir command with `dirname $out_file`
230 gdb_needs_out_file_path=
231 # Set this to control which thread package will be used.
233 # Reinitialize these from the flag values every loop pass, since some
234 # configure entries modify them.
236 gnu_ld="$gnu_ld_flag"
237 default_use_cxa_atexit=no
238 default_gnu_indirect_function=no
242 native_system_header_dir=/usr/include
243 target_type_format_char='@'
245 # Don't carry these over build->host->target. Please.
249 # Obsolete configurations.
251 # Avoid special cases that are not obsolete
268 if test "x$enable_obsolete" != xyes; then
269 echo "*** Configuration ${target} is obsolete." >&2
270 echo "*** Specify --enable-obsolete to build it anyway." >&2
271 echo "*** Support will be REMOVED in the next major release of GCC," >&2
272 echo "*** unless a maintainer comes forward." >&2
277 # Unsupported targets list. Do not put an entry in this list unless
278 # it would otherwise be caught by a more permissive pattern. The list
279 # should be in alphabetical order.
282 | i[34567]86-*-go32* \
283 | m68k-*-uclinuxoldabi* \
284 | mips64orion*-*-rtems* \
286 | sparc-hal-solaris2* \
288 | *-*-freebsd[12] | *-*-freebsd[12].* \
289 | *-*-freebsd*aout* \
297 | *-*-solaris2.[0-7] \
298 | *-*-solaris2.[0-7].* \
302 echo "*** Configuration ${target} not supported" 1>&2
307 # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
308 # updated in each machine entry. Also set default extra_headers for some
311 cpu_type=`echo ${target} | sed 's/-.*$//'`
316 tmake_file=m32c/t-m32c
317 target_has_targetm_common=no
322 extra_options="${extra_options} g.opt"
329 extra_headers="mmintrin.h arm_neon.h"
330 target_type_format_char='%'
331 c_target_objs="arm-c.o"
332 cxx_target_objs="arm-c.o"
333 extra_options="${extra_options} arm/arm-tables.opt"
337 c_target_objs="avr-c.o"
338 cxx_target_objs="avr-c.o"
339 extra_options="${extra_options} avr/avr-tables.opt"
348 extra_options="${extra_options} g.opt"
350 moxie*) cpu_type=moxie
351 target_has_targetm_common=no
355 extra_headers=math-68881.h
356 extra_options="${extra_options} m68k/m68k-tables.opt"
360 c_target_objs="i386-c.o"
361 cxx_target_objs="i386-c.o"
363 extra_options="${extra_options} fused-madd.opt"
364 extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
365 pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
366 nmmintrin.h bmmintrin.h fma4intrin.h wmmintrin.h
367 immintrin.h x86intrin.h avxintrin.h xopintrin.h
368 ia32intrin.h cross-stdarg.h lwpintrin.h popcntintrin.h
369 lzcntintrin.h bmiintrin.h bmi2intrin.h tbmintrin.h
370 avx2intrin.h fmaintrin.h f16cintrin.h"
374 c_target_objs="i386-c.o"
375 cxx_target_objs="i386-c.o"
376 extra_options="${extra_options} fused-madd.opt"
377 extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
378 pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
379 nmmintrin.h bmmintrin.h fma4intrin.h wmmintrin.h
380 immintrin.h x86intrin.h avxintrin.h xopintrin.h
381 ia32intrin.h cross-stdarg.h lwpintrin.h popcntintrin.h
382 lzcntintrin.h bmiintrin.h tbmintrin.h bmi2intrin.h
383 avx2intrin.h fmaintrin.h f16cintrin.h"
387 extra_headers=ia64intrin.h
389 extra_options="${extra_options} g.opt fused-madd.opt"
395 extra_options="${extra_options} g.opt"
399 extra_options="${extra_options} g.opt"
402 extra_headers=math-68881.h
403 extra_options="${extra_options} m68k/m68k-tables.opt"
407 extra_options="${extra_options} g.opt"
412 extra_headers="loongson.h"
413 extra_options="${extra_options} g.opt mips/mips-tables.opt"
420 extra_headers="ppc-asm.h altivec.h spe.h ppu_intrinsics.h paired.h spu2vmx.h vec_types.h si2vmx.h"
423 xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[34567]|xpower6x|xrs64a|xcell|xa2|xe500mc64)
427 extra_options="${extra_options} g.opt fused-madd.opt rs6000/rs6000-tables.opt"
431 extra_options="${extra_options} g.opt fused-madd.opt rs6000/rs6000-tables.opt"
435 extra_options="${extra_options} g.opt"
439 c_target_objs="sparc-c.o"
440 cxx_target_objs="sparc-c.o"
441 extra_headers="visintrin.h"
451 extra_options="${extra_options} fused-madd.opt"
453 # Note the 'l'; we need to be able to match e.g. "shle" or "shl".
454 sh[123456789lbe]*-*-* | sh-*-*)
463 extra_headers="c6x_intrinsics.h"
464 extra_options="${extra_options} c6x/c6x-tables.opt"
467 extra_options="${extra_options} fused-madd.opt"
479 tm_file=${cpu_type}/${cpu_type}.h
480 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
482 tm_p_file=${cpu_type}/${cpu_type}-protos.h
485 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
487 extra_modes=${cpu_type}/${cpu_type}-modes.def
489 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt
491 extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt"
496 if test "x$enable_cld" = xyes; then
497 tm_defines="${tm_defines} USE_IX86_CLD=1"
499 if test "x$enable_frame_pointer" = xyes; then
500 tm_defines="${tm_defines} USE_IX86_FRAME_POINTER=1"
502 tm_file="vxworks-dummy.h ${tm_file}"
505 tm_file="i386/biarch64.h ${tm_file}"
506 if test "x$enable_cld" = xyes; then
507 tm_defines="${tm_defines} USE_IX86_CLD=1"
509 if test "x$enable_frame_pointer" = xyes; then
510 tm_defines="${tm_defines} USE_IX86_FRAME_POINTER=1"
512 tm_file="vxworks-dummy.h ${tm_file}"
516 # On a.out targets, we need to use collect2.
523 # Common C libraries.
524 tm_defines="$tm_defines LIBC_GLIBC=1 LIBC_UCLIBC=2 LIBC_BIONIC=3"
526 # Common parts for widely ported systems.
529 tmake_file="t-darwin ${cpu_type}/t-darwin"
530 tm_file="${tm_file} darwin.h"
533 tm_file="${tm_file} darwin9.h"
535 *-*-darwin[12][0-9]*)
536 tm_file="${tm_file} darwin9.h darwin10.h"
539 tm_file="${tm_file} ${cpu_type}/darwin.h"
540 tm_p_file="${tm_p_file} darwin-protos.h"
541 target_gtfiles="\$(srcdir)/config/darwin.c"
542 extra_options="${extra_options} darwin.opt"
543 c_target_objs="${c_target_objs} darwin-c.o"
544 cxx_target_objs="${cxx_target_objs} darwin-c.o"
545 fortran_target_objs="darwin-f.o"
546 target_has_targetcm=yes
547 extra_objs="darwin.o"
548 extra_gcc_objs="darwin-driver.o"
549 default_use_cxa_atexit=yes
551 case ${enable_threads} in
552 "" | yes | posix) thread_file='posix' ;;
556 # This is the generic ELF configuration of FreeBSD. Later
557 # machine-specific sections may refine and add to this
560 # Due to tm_file entry ordering issues that vary between cpu
561 # architectures, we only define fbsd_tm_file to allow the
562 # machine-specific section to dictate the final order of all
563 # entries of tm_file with the minor exception that components
564 # of the tm_file set here will always be of the form:
566 # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
568 # The machine-specific section should not tamper with this
569 # ordering but may order all other entries of tm_file as it
570 # pleases around the provided core setting.
573 fbsd_major=`echo ${target} | sed -e 's/.*freebsd//g' | sed -e 's/\..*//g'`
574 tm_defines="${tm_defines} FBSD_MAJOR=${fbsd_major}"
575 tmake_file="t-slibgcc"
576 case ${enable_threads} in
578 fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
584 echo 'Unknown thread configuration for FreeBSD'
588 fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h freebsd-stdint.h"
589 extra_options="$extra_options rpath.opt freebsd.opt"
594 default_use_cxa_atexit=yes;;
596 # need_64bit_hwint=yes # system compiler has this for all arch!
599 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu | *-*-gnu* | *-*-kopensolaris*-gnu)
600 extra_options="$extra_options gnu-user.opt"
603 case ${enable_threads} in
604 "" | yes | posix) thread_file='posix' ;;
606 tmake_file="t-slibgcc"
608 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu | *-*-kopensolaris*-gnu)
611 native_system_header_dir=/include
614 # glibc / uclibc / bionic switch.
615 # uclibc and bionic aren't usable for GNU/Hurd and neither for GNU/k*BSD.
618 extra_options="$extra_options linux.opt";;
622 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_BIONIC"
625 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC"
628 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_GLIBC"
631 # Assume that glibc or uClibc or Bionic are being used and so __cxa_atexit
633 default_use_cxa_atexit=yes
636 # Add Android userspace support to Linux targets.
639 tm_file="$tm_file linux-android.h"
640 extra_options="$extra_options linux-android.opt"
643 # Enable compilation for Android by default for *android* targets.
646 tm_defines="$tm_defines ANDROID_DEFAULT=1"
649 tm_defines="$tm_defines ANDROID_DEFAULT=0"
654 tmake_file="t-slibgcc"
658 # NetBSD 2.0 and later get POSIX threads enabled by default.
659 # Allow them to be explicitly enabled on any other version.
660 case ${enable_threads} in
663 *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
665 tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
671 tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
675 # NetBSD 2.0 and later provide __cxa_atexit(), which we use by
676 # default (unless overridden by --disable-__cxa_atexit).
678 *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
679 default_use_cxa_atexit=yes
684 tmake_file="t-openbsd"
685 case ${enable_threads} in
691 *-*-openbsd2.*|*-*-openbsd3.[012])
692 tm_defines="${tm_defines} HAS_LIBC_R=1" ;;
696 case ${enable_threads} in
697 yes) thread_file='rtems' ;;
699 extra_options="${extra_options} rtems.opt"
703 extra_options="$extra_options gnu-user.opt"
705 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC SINGLE_LIBC"
708 # i?86-*-solaris2* needs to insert headers between cpu default and
709 # Solaris 2 specific ones.
710 sol2_tm_file="dbxelf.h elfos.h ${cpu_type}/sysv4.h sol2.h ${cpu_type}/sol2.h"
712 *-*-solaris2.1[0-9]*)
713 sol2_tm_file="${sol2_tm_file} sol2-10.h"
717 use_gcc_stdint=provide
720 if test x$gnu_ld = xyes; then
721 tm_file="usegld.h ${tm_file}"
723 if test x$gas = xyes; then
724 tm_file="usegas.h ${tm_file}"
726 tm_p_file="${tm_p_file} sol2-protos.h"
727 tmake_file="${tmake_file} t-sol2 t-slibgcc"
728 c_target_objs="${c_target_objs} sol2-c.o"
729 cxx_target_objs="${cxx_target_objs} sol2-c.o sol2-cxx.o"
730 extra_objs="sol2.o sol2-stubs.o"
731 extra_options="${extra_options} sol2.opt"
732 case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
733 "":yes:* | yes:yes:* )
739 extra_options="${extra_options} vms/vms.opt"
741 tmake_file="vms/t-vms t-slibgcc"
743 target_gtfiles="$target_gtfiles \$(srcdir)/config/vms/vms.c"
744 tm_p_file="${tm_p_file} vms/vms-protos.h"
745 c_target_objs="vms-c.o"
746 cxx_target_objs="vms-c.o"
747 if test x$gnu_ld != xyes; then
748 # Build wrappers for native case.
749 extra_programs="ld\$(exeext) ar\$(exeext)"
750 tmake_file="$tmake_file vms/t-vmsnative"
756 extra_options="${extra_options} vxworks.opt"
758 case ${enable_threads} in
760 "" | yes | vxworks) thread_file='vxworks' ;;
761 *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
765 # Assume that newlib is being used and so __cxa_atexit is provided.
766 default_use_cxa_atexit=yes
773 tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h glibc-stdint.h"
774 extra_options="${extra_options} alpha/elf.opt"
775 target_cpu_default="MASK_GAS"
778 tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
779 extra_options="${extra_options} alpha/elf.opt"
780 target_cpu_default="MASK_GAS"
783 tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
784 extra_options="${extra_options} netbsd.opt netbsd-elf.opt \
786 target_cpu_default="MASK_GAS"
789 tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
790 tm_file="alpha/alpha.h alpha/elf.h openbsd.h openbsd-stdint.h alpha/openbsd.h openbsd-libpthread.h"
791 extra_options="${extra_options} openbsd.opt alpha/elf.opt"
792 # default x-alpha is only appropriate for dec-osf.
793 target_cpu_default="MASK_GAS"
796 if test x$stabs = xyes
798 tm_file="${tm_file} dbx.h"
800 # mips-tfile and mips-tdump are only used with the native assembler
801 # and require the Tru64 UNIX <a.out.h>, so only build native.
802 if test x$gas != xyes && test x${host} = x${target}
804 extra_passes="mips-tfile mips-tdump"
807 tmake_file="t-slibgcc"
808 tm_file="${tm_file} alpha/osf5.h"
809 tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
810 extra_options="${extra_options} rpath.opt alpha/osf5.opt"
811 extra_headers=va_list.h
812 use_gcc_stdint=provide
813 case ${enable_threads} in
820 tm_file="${tm_file} vms/vms.h vms/vms64.h alpha/vms.h"
821 xm_file="alpha/xm-vms.h vms/xm-vms64.h"
822 tmake_file="${tmake_file} vms/t-vms64 alpha/t-vms"
825 tm_file="${tm_file} vms/vms.h alpha/vms.h"
826 xm_file="alpha/xm-vms.h"
827 tmake_file="${tmake_file} alpha/t-vms"
830 tm_file="elfos.h arm/elf.h arm/aout.h ${tm_file} vx-common.h vxworks.h arm/vxworks.h"
831 extra_options="${extra_options} arm/vxworks.opt"
832 tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
835 tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
836 tmake_file="${tmake_file} arm/t-arm arm/t-strongarm-elf"
839 tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
840 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
841 tmake_file="${tmake_file} arm/t-arm"
843 arm*-*-linux*) # ARM GNU/Linux with ELF
844 tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
847 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
850 tmake_file="${tmake_file} arm/t-arm"
853 tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h"
854 tmake_file="$tmake_file arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi"
855 # Define multilib configuration for arm-linux-androideabi.
858 tmake_file="$tmake_file arm/t-linux-androideabi"
861 # The BPABI long long divmod functions return a 128-bit value in
862 # registers r0-r3. Correctly modeling that requires the use of
865 # The EABI requires the use of __cxa_atexit.
866 default_use_cxa_atexit=yes
869 tmake_file="$tmake_file arm/t-linux"
872 with_tls=${with_tls:-gnu}
873 tm_file="$tm_file arm/aout.h arm/arm.h"
875 arm*-*-uclinux*) # ARM ucLinux
876 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h glibc-stdint.h"
877 tmake_file="arm/t-arm arm/t-arm-elf"
880 tm_file="$tm_file arm/bpabi.h arm/uclinux-eabi.h"
881 tmake_file="$tmake_file arm/t-bpabi"
882 # The BPABI long long divmod functions return a 128-bit value in
883 # registers r0-r3. Correctly modeling that requires the use of
886 # The EABI requires the use of __cxa_atexit.
887 default_use_cxa_atexit=yes
889 tm_file="$tm_file arm/aout.h arm/arm.h"
892 tm_file="dbxelf.h elfos.h newlib-stdint.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
893 tmake_file="arm/t-arm arm/t-arm-elf"
897 tmake_file="arm/t-arm arm/t-arm-elf-no-hardfp"
901 tmake_file="arm/t-arm arm/t-arm-elf-no-hardfp"
905 arm*-*-eabi* | arm*-*-symbianelf* | arm*-*-rtemseabi*)
906 # The BPABI long long divmod functions return a 128-bit value in
907 # registers r0-r3. Correctly modeling that requires the use of
910 default_use_cxa_atexit=yes
911 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
912 tmake_file="arm/t-arm arm/t-arm-elf"
915 tm_file="$tm_file newlib-stdint.h"
916 tmake_file="${tmake_file} arm/t-bpabi"
920 tm_file="${tm_file} rtems.h arm/rtems-eabi.h newlib-stdint.h"
921 tmake_file="${tmake_file} arm/t-bpabi t-rtems arm/t-rtems-eabi"
924 tm_file="${tm_file} arm/symbian.h"
925 # We do not include t-bpabi for Symbian OS because the system
926 # provides its own implementation of the BPABI functions.
927 tmake_file="${tmake_file} arm/t-symbian"
930 tm_file="${tm_file} arm/aout.h arm/arm.h"
933 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h newlib-stdint.h"
934 tmake_file="arm/t-arm arm/t-arm-elf t-rtems arm/t-rtems"
937 tm_file="dbxelf.h elfos.h newlib-stdint.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
938 tmake_file="arm/t-arm arm/t-arm-elf"
941 tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h"
942 tmake_file="arm/t-arm arm/t-wince-pe"
943 extra_options="${extra_options} arm/pe.opt"
947 tm_file="elfos.h avr/elf.h avr/avr.h dbxelf.h avr/rtems.h rtems.h newlib-stdint.h"
948 tmake_file="avr/t-avr avr/t-multilib t-rtems avr/t-rtems"
949 extra_gcc_objs="driver-avr.o avr-devices.o"
950 extra_objs="avr-devices.o avr-log.o"
953 tm_file="avr/avr.h dbxelf.h avr/avr-stdint.h"
955 extra_gcc_objs="driver-avr.o avr-devices.o"
956 extra_objs="avr-devices.o avr-log.o"
959 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
960 tmake_file=bfin/t-bfin-elf
964 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/uclinux.h"
965 tmake_file=bfin/t-bfin-uclinux
969 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/linux.h ./linux-sysroot-suffix.h"
970 tmake_file="bfin/t-bfin-linux t-slibgcc"
974 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h newlib-stdint.h"
975 tmake_file="t-rtems bfin/t-rtems"
978 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
983 tm_file="elfos.h ${tm_file}"
984 tmake_file="${tmake_file} cr16/t-cr16 "
987 crisv32-*-elf | crisv32-*-none)
988 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
989 tmake_file="cris/t-cris"
990 target_cpu_default=32
992 extra_options="${extra_options} cris/elf.opt"
995 cris-*-elf | cris-*-none)
996 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
997 tmake_file="cris/t-cris cris/t-elfmulti"
999 extra_options="${extra_options} cris/elf.opt"
1002 crisv32-*-linux* | cris-*-linux*)
1003 tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h cris/linux.h"
1004 # We need to avoid using t-linux, so override default tmake_file
1005 tmake_file="cris/t-cris cris/t-linux t-slibgcc"
1006 extra_options="${extra_options} cris/linux.opt"
1009 target_cpu_default=10
1012 target_cpu_default=32
1017 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
1018 tmake_file="epiphany/t-epiphany"
1019 extra_options="${extra_options} fused-madd.opt"
1020 extra_objs="$extra_objs mode-switch-use.o resolve-sw-modes.o"
1021 tm_defines="${tm_defines} EPIPHANY_STACK_OFFSET=${with_stack_offset:-8}"
1022 extra_headers="epiphany_intrinsics.h"
1025 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
1028 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
1029 tmake_file=frv/t-frv
1032 tm_file="dbxelf.h elfos.h ${tm_file} \
1033 gnu-user.h linux.h glibc-stdint.h frv/linux.h"
1034 tmake_file="${tmake_file} frv/t-frv frv/t-linux"
1039 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
1040 tmake_file="${tmake_file} moxie/t-moxie"
1045 tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h moxie/uclinux.h"
1046 tmake_file="${tmake_file} moxie/t-moxie"
1049 tmake_file="${tmake_file} moxie/t-moxie t-rtems"
1050 tm_file="moxie/moxie.h dbxelf.h elfos.h moxie/rtems.h rtems.h newlib-stdint.h"
1053 tmake_file="h8300/t-h8300 t-rtems h8300/t-rtems"
1054 tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h newlib-stdint.h"
1057 tmake_file="h8300/t-h8300"
1058 tm_file="h8300/h8300.h dbxelf.h elfos.h newlib-stdint.h h8300/elf.h"
1061 target_cpu_default="MASK_PA_11|MASK_PA_20"
1062 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h gnu-user.h linux.h \
1063 glibc-stdint.h pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h \
1066 need_64bit_hwint=yes
1069 target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
1070 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h pa/pa-linux.h \
1071 pa/pa32-regs.h pa/pa32-linux.h"
1073 # port not yet contributed.
1075 # target_cpu_default="MASK_PA_11"
1077 hppa[12]*-*-hpux10*)
1079 hppa1.1-*-* | hppa2*-*-*)
1080 target_cpu_default="MASK_PA_11"
1083 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
1084 pa/pa-hpux.h pa/pa-hpux10.h"
1085 extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux10.opt"
1088 tm_file="${tm_file} pa/pa-hpux1010.h"
1089 extra_options="${extra_options} pa/pa-hpux1010.opt"
1092 use_gcc_stdint=provide
1093 tm_file="${tm_file} hpux-stdint.h"
1094 tmake_file="t-slibgcc"
1095 case ${enable_threads} in
1097 if test x$have_pthread_h = xyes ; then
1098 tmake_file="${tmake_file} pa/t-dce-thr"
1102 tmake_file="${tmake_file} pa/t-dce-thr"
1107 if test "x$with_dwarf2" != x; then
1108 echo "Warning: dwarf2 debug format is not supported for this target, --with-dwarf2 ignored" 1>&2
1113 target_cpu_default="MASK_PA_11|MASK_PA_20"
1114 if test x$gnu_ld = xyes
1116 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1118 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
1119 pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
1123 tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
1124 extra_options="${extra_options} pa/pa-hpux1111.opt"
1127 tm_file="${tm_file} pa/pa-hpux1131.h pa/pa-64.h pa/pa64-hpux.h"
1128 extra_options="${extra_options} pa/pa-hpux1131.opt"
1131 tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
1134 extra_options="${extra_options} pa/pa-hpux.opt \
1135 pa/pa-hpux1010.opt pa/pa64-hpux.opt hpux11.opt"
1136 need_64bit_hwint=yes
1137 tmake_file="t-slibgcc"
1138 case x${enable_threads} in
1146 use_gcc_stdint=provide
1147 tm_file="${tm_file} hpux-stdint.h"
1151 tm_file="${tm_file} hpux-stdint.h"
1155 hppa[12]*-*-hpux11*)
1157 hppa1.1-*-* | hppa2*-*-*)
1158 target_cpu_default="MASK_PA_11"
1161 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
1162 pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h"
1163 extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt \
1167 tm_file="${tm_file} pa/pa-hpux1111.h"
1168 extra_options="${extra_options} pa/pa-hpux1111.opt"
1171 tm_file="${tm_file} pa/pa-hpux1131.h"
1172 extra_options="${extra_options} pa/pa-hpux1131.opt"
1175 tmake_file="t-slibgcc"
1176 case x${enable_threads} in
1185 use_gcc_stdint=provide
1186 tm_file="${tm_file} hpux-stdint.h"
1190 tm_file="${tm_file} hpux-stdint.h"
1193 if test "x$with_dwarf2" != x; then
1194 echo "Warning: dwarf2 debug format is not supported for this target, --with-dwarf2 ignored" 1>&2
1198 i[34567]86-*-darwin*)
1200 # Baseline choice for a machine that allows m64 support.
1201 with_cpu=${with_cpu:-core2}
1202 tmake_file="${tmake_file} t-slibgcc"
1205 with_cpu=${with_cpu:-core2}
1206 tmake_file="${tmake_file} ${cpu_type}/t-darwin64 t-slibgcc"
1207 tm_file="${tm_file} ${cpu_type}/darwin64.h"
1210 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h"
1213 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h"
1215 i[34567]86-*-freebsd*)
1216 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
1219 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
1221 i[34567]86-*-netbsdelf*)
1222 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
1223 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1226 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
1227 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1229 i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123])
1230 tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h"
1231 extra_options="${extra_options} openbsd.opt"
1232 # needed to unconfuse gdb
1233 tmake_file="${tmake_file} t-openbsd i386/t-openbsd"
1234 # we need collect2 until our bug is fixed...
1237 i[34567]86-*-openbsd*)
1238 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
1239 tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h i386/openbsdelf.h"
1240 extra_options="${extra_options} openbsd.opt"
1244 i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu | i[34567]86-*-gnu* | i[34567]86-*-kopensolaris*-gnu)
1245 # Intel 80386's running GNU/*
1246 # with ELF format using glibc 2
1247 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h glibc-stdint.h"
1249 i[34567]86-*-linux*)
1250 tm_file="${tm_file} linux.h"
1251 # Assume modern glibc
1252 default_gnu_indirect_function=yes
1253 if test x$enable_targets = xall; then
1254 tm_file="${tm_file} i386/x86-64.h i386/gnu-user64.h i386/linux64.h"
1255 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1256 tmake_file="${tmake_file} i386/t-linux64"
1257 x86_multilibs="${with_multilib_list}"
1258 if test "$x86_multilibs" = "default"; then
1259 x86_multilibs="m64,m32"
1261 x86_multilibs=`echo $x86_multilibs | sed -e 's/,/ /g'`
1262 for x86_multilib in ${x86_multilibs}; do
1263 case ${x86_multilib} in
1265 TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${x86_multilib}"
1268 echo "--with-multilib-list=${x86_with_multilib} not supported."
1272 TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
1274 case X"${with_cpu}" in
1275 Xgeneric|Xatom|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver2|Xbdver1|Xbtver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
1278 if test x$with_cpu_64 = x; then
1283 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1284 echo "generic atom core2 corei7 corei7-avx nocona x86-64 bdver2 bdver1 btver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
1289 tm_file="${tm_file} i386/gnu-user.h i386/linux.h"
1292 i[34567]86-*-knetbsd*-gnu)
1293 tm_file="${tm_file} i386/gnu-user.h knetbsd-gnu.h i386/knetbsd-gnu.h"
1295 i[34567]86-*-kfreebsd*-gnu)
1296 tm_file="${tm_file} i386/gnu-user.h kfreebsd-gnu.h i386/kfreebsd-gnu.h"
1298 i[34567]86-*-kopensolaris*-gnu)
1299 tm_file="${tm_file} i386/gnu-user.h kopensolaris-gnu.h i386/kopensolaris-gnu.h"
1302 tm_file="$tm_file i386/gnu-user.h gnu.h i386/gnu.h"
1306 x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
1307 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h glibc-stdint.h \
1308 i386/x86-64.h i386/gnu-user64.h"
1311 tm_file="${tm_file} linux.h i386/linux64.h"
1312 # Assume modern glibc
1313 default_gnu_indirect_function=yes
1315 x86_64-*-kfreebsd*-gnu)
1316 tm_file="${tm_file} kfreebsd-gnu.h i386/kfreebsd-gnu64.h"
1318 x86_64-*-knetbsd*-gnu)
1319 tm_file="${tm_file} knetbsd-gnu.h"
1322 tmake_file="${tmake_file} i386/t-linux64"
1323 x86_multilibs="${with_multilib_list}"
1324 if test "$x86_multilibs" = "default"; then
1325 x86_multilibs="m64,m32"
1327 x86_multilibs=`echo $x86_multilibs | sed -e 's/,/ /g'`
1328 for x86_multilib in ${x86_multilibs}; do
1329 case ${x86_multilib} in
1331 TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${x86_multilib}"
1334 echo "--with-multilib-list=${x86_with_multilib} not supported."
1338 TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
1340 i[34567]86-pc-msdosdjgpp*)
1341 xm_file=i386/xm-djgpp.h
1342 tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h i386/djgpp-stdint.h"
1343 native_system_header_dir=/dev/env/DJDIR/include
1344 extra_options="${extra_options} i386/djgpp.opt"
1349 i[34567]86-*-lynxos*)
1351 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
1352 tmake_file="${tmake_file} t-lynx"
1353 extra_options="${extra_options} lynx.opt"
1358 i[34567]86-*-nto-qnx*)
1359 tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h i386/unix.h i386/nto.h"
1360 extra_options="${extra_options} i386/nto.opt"
1364 i[34567]86-*-rtems*)
1365 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h newlib-stdint.h"
1366 tmake_file="${tmake_file} i386/t-rtems t-rtems"
1368 i[34567]86-*-solaris2* | x86_64-*-solaris2.1[0-9]*)
1369 tm_file="${tm_file} i386/unix.h i386/att.h ${sol2_tm_file}"
1370 # Set default arch_32 to pentium4, tune_32 to generic like the other
1371 # i386 targets, although config.guess defaults to i386-pc-solaris2*.
1374 # Solaris 8 and 9/x86 cannot execute SSE/SSE2 instructions by
1376 with_arch_32=${with_arch_32:-pentiumpro}
1379 with_arch_32=${with_arch_32:-pentium4}
1382 with_tune_32=${with_tune_32:-generic}
1384 *-*-solaris2.1[0-9]*)
1385 tm_file="${tm_file} i386/x86-64.h i386/sol2-bi.h sol2-bi.h"
1386 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1387 tmake_file="$tmake_file i386/t-sol2-64"
1389 case X"${with_cpu}" in
1390 Xgeneric|Xatom|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver2|Xbdver1|Xbtver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
1393 if test x$with_cpu_64 = x; then
1398 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1399 echo "generic atom core2 corei7 corei7-avx nocona x86-64 bdver2 bdver1 btver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
1406 i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae)
1407 tm_file="${tm_file} i386/unix.h i386/att.h elfos.h vx-common.h"
1410 tm_file="${tm_file} vxworksae.h i386/vx-common.h i386/vxworksae.h"
1411 tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae"
1414 tm_file="${tm_file} vxworks.h i386/vx-common.h i386/vxworks.h"
1415 tmake_file="${tmake_file} i386/t-vxworks"
1419 i[34567]86-*-cygwin*)
1420 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h i386/cygwin-stdint.h"
1421 xm_file=i386/xm-cygwin.h
1422 tmake_file="${tmake_file} i386/t-cygming t-slibgcc"
1423 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1424 extra_options="${extra_options} i386/cygming.opt"
1425 extra_objs="winnt.o winnt-stubs.o"
1426 c_target_objs="${c_target_objs} msformat-c.o"
1427 cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
1428 if test x$enable_threads = xyes; then
1433 i[34567]86-*-mingw* | x86_64-*-mingw*)
1434 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h"
1435 xm_file=i386/xm-mingw32.h
1437 x86_64-*-* | *-w64-*)
1443 if test x$enable_threads = xposix ; then
1444 tm_file="${tm_file} i386/mingw-pthread.h"
1446 tm_file="${tm_file} i386/mingw32.h"
1447 # This makes the logic if mingw's or the w64 feature set has to be used
1450 user_headers_inc_next_post="${user_headers_inc_next_post} float.h"
1451 user_headers_inc_next_pre="${user_headers_inc_next_pre} stddef.h stdarg.h"
1452 tm_file="${tm_file} i386/mingw-w64.h"
1453 if test x$enable_targets = xall; then
1454 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1455 case X"${with_cpu}" in
1456 Xgeneric|Xatom|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver2|Xbdver1|Xbtver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
1459 if test x$with_cpu_64 = x; then
1464 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1465 echo "generic atom core2 corei7 Xcorei7-avx nocona x86-64 bdver2 bdver1 btver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
1474 tm_file="${tm_file} i386/mingw-stdint.h"
1475 tmake_file="${tmake_file} i386/t-cygming t-slibgcc"
1478 tmake_file="${tmake_file} i386/t-mingw-w64"
1481 tmake_file="${tmake_file} i386/t-mingw-w32"
1484 native_system_header_dir=/mingw/include
1485 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1486 extra_options="${extra_options} i386/cygming.opt i386/mingw.opt"
1489 extra_options="${extra_options} i386/mingw-w64.opt"
1494 extra_objs="winnt.o winnt-stubs.o"
1495 c_target_objs="${c_target_objs} msformat-c.o"
1496 cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
1499 default_use_cxa_atexit=yes
1501 case ${enable_threads} in
1511 tm_file="${tm_file} i386/crtdll.h"
1513 *mingw32msv* | *mingw*)
1517 i[34567]86-*-interix[3-9]*)
1518 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h"
1519 tmake_file="${tmake_file} i386/t-interix"
1520 extra_options="${extra_options} rpath.opt i386/interix.opt"
1521 extra_objs="winnt.o winnt-stubs.o"
1522 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1523 if test x$enable_threads = xyes ; then
1526 if test x$stabs = xyes ; then
1527 tm_file="${tm_file} dbxcoff.h"
1531 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h ia64/sysv4.h ia64/elf.h"
1532 tmake_file="ia64/t-ia64"
1533 target_cpu_default="0"
1534 if test x$gas = xyes
1536 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1538 if test x$gnu_ld = xyes
1540 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1544 tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
1545 target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1546 tmake_file="${tmake_file} ia64/t-ia64"
1549 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ia64/sysv4.h ia64/linux.h"
1550 tmake_file="${tmake_file} ia64/t-ia64 t-libunwind"
1551 target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1554 tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/hpux.h"
1555 tmake_file="ia64/t-ia64 ia64/t-hpux t-slibgcc"
1556 target_cpu_default="MASK_GNU_AS"
1557 case x$enable_threads in
1563 c_target_objs="ia64-c.o"
1564 cxx_target_objs="ia64-c.o"
1565 extra_options="${extra_options} ia64/ilp32.opt hpux11.opt"
1567 tm_file="${tm_file} hpux-stdint.h"
1570 tm_file="${tm_file} ia64/hpux-unix2003.h"
1575 tm_file="${tm_file} elfos.h ia64/sysv4.h ia64/elf.h vms/vms.h vms/vms64.h ia64/vms.h"
1576 xm_file="vms/xm-vms.h vms/xm-vms64.h"
1577 tmake_file="${tmake_file} vms/t-vms64 ia64/t-ia64"
1578 target_cpu_default="0"
1579 if test x$gas = xyes
1581 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1583 extra_options="${extra_options} ia64/vms.opt"
1586 tm_file="elfos.h newlib-stdint.h iq2000/iq2000.h"
1587 out_file=iq2000/iq2000.c
1588 md_file=iq2000/iq2000.md
1591 tm_file="dbxelf.h elfos.h ${tm_file}"
1592 tmake_file="${tmake_file} lm32/t-lm32"
1595 tm_file="dbxelf.h elfos.h ${tm_file} lm32/rtems.h rtems.h newlib-stdint.h"
1596 tmake_file="${tmake_file} lm32/t-lm32"
1597 tmake_file="${tmake_file} t-rtems"
1598 tmake_file="${tmake_file} lm32/t-rtems"
1601 tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h lm32/uclinux-elf.h"
1602 tmake_file="${tmake_file} lm32/t-lm32"
1605 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
1608 tm_file="dbxelf.h elfos.h newlib-stdint.h m32r/little.h ${tm_file}"
1611 tm_file="dbxelf.h elfos.h ${tm_file} m32r/rtems.h rtems.h newlib-stdint.h"
1612 tmake_file="m32r/t-m32r t-rtems"
1615 tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} m32r/linux.h"
1616 # We override the tmake_file for linux -- why?
1617 tmake_file="m32r/t-linux t-slibgcc"
1619 if test x$enable_threads = xyes; then
1624 tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h m32r/little.h ${tm_file} m32r/linux.h"
1625 # We override the tmake_file for linux -- why?
1626 tmake_file="m32r/t-linux t-slibgcc"
1628 if test x$enable_threads = xyes; then
1632 m68k-*-elf* | fido-*-elf*)
1635 # Check that $with_cpu makes sense.
1640 echo "Cannot accept --with-cpu=$with_cpu"
1647 default_m68k_cpu=68020
1651 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h newlib-stdint.h m68k/m68kemb.h m68k/m68020-elf.h"
1652 tm_defines="${tm_defines} MOTOROLA=1"
1653 tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-m68kelf"
1654 # Add multilibs for targets other than fido.
1659 tmake_file="$tmake_file m68k/t-mlibs"
1664 default_m68k_cpu=68020
1666 tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
1667 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1668 tm_defines="${tm_defines} MOTOROLA=1"
1671 default_m68k_cpu=68020
1673 # needed to unconfuse gdb
1674 tm_defines="${tm_defines} OBSD_OLD_GAS"
1675 tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h m68k/openbsd.h"
1676 extra_options="${extra_options} openbsd.opt"
1677 tmake_file="t-openbsd m68k/t-openbsd"
1678 # we need collect2 until our bug is fixed...
1681 m68k-*-uclinux*) # Motorola m68k/ColdFire running uClinux
1682 # with uClibc, using the new GNU/Linux-style
1684 default_m68k_cpu=68020
1686 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h"
1687 extra_options="${extra_options} m68k/uclinux.opt"
1688 tm_defines="${tm_defines} MOTOROLA=1"
1689 tmake_file="m68k/t-floatlib m68k/t-uclinux m68k/t-mlibs"
1691 m68k-*-linux*) # Motorola m68k's running GNU/Linux
1692 # with ELF format using glibc 2
1693 # aka the GNU/Linux C library 6.
1694 default_m68k_cpu=68020
1696 with_arch=${with_arch:-m68k}
1697 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h m68k/linux.h ./sysroot-suffix.h"
1698 extra_options="${extra_options} m68k/ieee.opt"
1699 tm_defines="${tm_defines} MOTOROLA=1"
1700 tmake_file="${tmake_file} m68k/t-floatlib m68k/t-linux m68k/t-mlibs"
1703 default_m68k_cpu=68020
1705 tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems m68k/t-mlibs"
1706 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h newlib-stdint.h"
1707 tm_defines="${tm_defines} MOTOROLA=1"
1710 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file} mcore/mcore-elf.h"
1711 tmake_file=mcore/t-mcore
1715 tm_file="dbxelf.h elfos.h ${tm_file}"
1716 tmake_file=mep/t-mep
1717 c_target_objs="mep-pragma.o"
1718 cxx_target_objs="mep-pragma.o"
1719 if test -d "${srcdir}/../newlib/libc/include" &&
1720 test "x$with_headers" = x; then
1726 tm_file="${tm_file} dbxelf.h gnu-user.h linux.h microblaze/linux.h"
1727 c_target_objs="${c_target_objs} microblaze-c.o"
1728 cxx_target_objs="${cxx_target_objs} microblaze-c.o"
1731 tm_file="${tm_file} dbxelf.h"
1732 c_target_objs="${c_target_objs} microblaze-c.o"
1733 cxx_target_objs="${cxx_target_objs} microblaze-c.o"
1734 tmake_file="${tmake_file} microblaze/t-microblaze"
1737 tm_file="elfos.h ${tm_file} mips/iris6.h"
1738 tmake_file="mips/t-irix6 t-slibgcc"
1739 c_target_objs="irix6-c.o"
1740 cxx_target_objs="irix6-c.o"
1741 extra_options="${extra_options} rpath.opt mips/iris6.opt"
1742 target_cpu_default="MASK_ABICALLS"
1743 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
1744 # Only IRIX Development Foundation 1.3 for IRIX 6.5 provides stdint.h.
1746 if test "x$stabs" = xyes
1748 tm_file="${tm_file} dbx.h"
1750 if test "x$gnu_ld" = xyes
1752 tm_defines="${tm_defines} IRIX_USING_GNU_LD"
1754 case ${enable_threads}:${have_pthread_h} in
1755 "":yes | yes:yes ) thread_file=posix ;;
1758 mips*-*-netbsd*) # NetBSD/mips, either endian.
1759 target_cpu_default="MASK_ABICALLS"
1760 tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
1761 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1763 mips64*-*-linux* | mipsisa64*-*-linux*)
1764 tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/gnu-user64.h mips/linux64.h"
1765 tmake_file="${tmake_file} mips/t-linux64"
1766 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_N32"
1768 mips64el-st-linux-gnu)
1769 tm_file="${tm_file} mips/st.h"
1770 tmake_file="${tmake_file} mips/t-st"
1772 mips64octeon*-*-linux*)
1773 tm_defines="${tm_defines} MIPS_CPU_STRING_DEFAULT=\\\"octeon\\\""
1774 target_cpu_default=MASK_SOFT_FLOAT_ABI
1776 mipsisa64r2*-*-linux*)
1777 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=65"
1782 test x$with_llsc != x || with_llsc=yes
1784 mips*-*-linux*) # Linux MIPS, either endian.
1785 tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h"
1786 if test x$enable_targets = xall; then
1787 tm_file="${tm_file} mips/gnu-user64.h mips/linux64.h"
1788 tmake_file="${tmake_file} mips/t-linux64"
1792 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33"
1795 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1797 test x$with_llsc != x || with_llsc=yes
1800 tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
1801 target_cpu_default="MASK_ABICALLS"
1802 tm_file="mips/mips.h openbsd.h openbsd-stdint.h openbsd-libpthread.h mips/openbsd.h mips/sdb.h"
1803 extra_options="${extra_options} openbsd.opt"
1806 tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";;
1807 *) tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";;
1811 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/sde.h"
1812 tmake_file="mips/t-sde"
1813 extra_options="${extra_options} mips/sde.opt"
1814 case "${with_newlib}" in
1816 # newlib / libgloss.
1819 # MIPS toolkit libraries.
1820 tm_file="$tm_file mips/sdemtk.h"
1821 tmake_file="$tmake_file mips/t-sdemtk"
1822 case ${enable_threads} in
1824 thread_file='mipssde'
1831 tm_defines="MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_32"
1834 tm_defines="MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_32"
1837 tm_defines="MIPS_ISA_DEFAULT=65 MIPS_ABI_DEFAULT=ABI_N32"
1840 tm_defines="MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_N32"
1844 mipsisa32-*-elf* | mipsisa32el-*-elf* | \
1845 mipsisa32r2-*-elf* | mipsisa32r2el-*-elf* | \
1846 mipsisa64-*-elf* | mipsisa64el-*-elf* | \
1847 mipsisa64r2-*-elf* | mipsisa64r2el-*-elf*)
1848 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1849 tmake_file="mips/t-isa3264"
1852 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33"
1855 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1858 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=65"
1861 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64"
1865 mipsisa32*-*-elfoabi*)
1866 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_32"
1867 tm_file="${tm_file} mips/elfoabi.h"
1869 mipsisa64*-*-elfoabi*)
1870 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_O64"
1871 tm_file="${tm_file} mips/elfoabi.h"
1874 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
1878 mipsisa64sr71k-*-elf*)
1879 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1880 tmake_file=mips/t-sr71k
1881 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1882 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
1884 mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
1885 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1886 tmake_file="mips/t-elf mips/t-sb1"
1887 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1888 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
1890 mips-*-elf* | mipsel-*-elf*)
1891 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1892 tmake_file="mips/t-elf"
1894 mips64-*-elf* | mips64el-*-elf*)
1895 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1896 tmake_file="mips/t-elf"
1897 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1898 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1900 mips64vr-*-elf* | mips64vrel-*-elf*)
1901 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/vr.h mips/elf.h"
1902 tmake_file=mips/t-vr
1903 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
1905 mips64orion-*-elf* | mips64orionel-*-elf*)
1906 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elforion.h mips/elf.h"
1907 tmake_file="mips/t-elf"
1908 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1909 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1912 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
1913 tmake_file="mips/t-elf t-rtems mips/t-rtems"
1916 tm_file="elfos.h ${tm_file} mips/elf.h vx-common.h vxworks.h mips/vxworks.h"
1917 tmake_file="${tmake_file} mips/t-vxworks"
1919 mipstx39-*-elf* | mipstx39el-*-elf*)
1920 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/r3900.h mips/elf.h"
1921 tmake_file="mips/t-r3900"
1923 mmix-knuth-mmixware)
1924 tm_file="${tm_file} newlib-stdint.h"
1925 need_64bit_hwint=yes
1929 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
1930 if test x$stabs = xyes
1932 tm_file="${tm_file} dbx.h"
1938 tm_file="${tm_file} newlib-stdint.h"
1942 tm_file="${tm_file} newlib-stdint.h"
1944 tmake_file="picochip/t-picochip t-pnt16-warn"
1946 # port not yet contributed
1947 #powerpc-*-openbsd*)
1948 # tmake_file="${tmake_file} rs6000/t-fprules"
1952 extra_options="${extra_options} rs6000/darwin.opt"
1954 *-darwin1[0-9]* | *-darwin[8-9]*)
1955 tmake_file="${tmake_file} rs6000/t-darwin8"
1956 tm_file="${tm_file} rs6000/darwin8.h"
1959 tm_file="${tm_file} rs6000/darwin7.h"
1964 tmake_file="${tmake_file} t-slibgcc"
1965 extra_headers=altivec.h
1967 powerpc64-*-darwin*)
1968 extra_options="${extra_options} ${cpu_type}/darwin.opt"
1969 tmake_file="${tmake_file} ${cpu_type}/t-darwin64 t-slibgcc"
1970 tm_file="${tm_file} ${cpu_type}/darwin8.h ${cpu_type}/darwin64.h"
1971 extra_headers=altivec.h
1973 powerpc*-*-freebsd*)
1974 tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h"
1975 extra_options="${extra_options} rs6000/sysv4.opt"
1976 tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1979 tm_file="${tm_file} rs6000/default64.h rs6000/freebsd64.h"
1980 tmake_file="${tmake_file} rs6000/t-freebsd64"
1981 extra_options="${extra_options} rs6000/linux64.opt"
1984 tm_file="${tm_file} rs6000/freebsd.h"
1989 tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
1990 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1991 tmake_file="${tmake_file} rs6000/t-netbsd"
1992 extra_options="${extra_options} rs6000/sysv4.opt"
1995 tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabispe.h"
1996 extra_options="${extra_options} rs6000/sysv4.opt"
1997 tmake_file="rs6000/t-spe rs6000/t-ppccomm"
2000 powerpc-*-eabisimaltivec*)
2001 tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h rs6000/eabialtivec.h"
2002 extra_options="${extra_options} rs6000/sysv4.opt"
2003 tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
2007 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
2008 extra_options="${extra_options} rs6000/sysv4.opt"
2009 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
2013 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h"
2014 extra_options="${extra_options} rs6000/sysv4.opt"
2015 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
2017 powerpc-*-eabialtivec*)
2018 tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabialtivec.h"
2019 extra_options="${extra_options} rs6000/sysv4.opt"
2020 tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
2023 powerpc-xilinx-eabi*)
2024 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/singlefp.h rs6000/xfpu.h rs6000/xilinx.h"
2025 extra_options="${extra_options} rs6000/sysv4.opt rs6000/xilinx.opt"
2026 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm rs6000/t-xilinx"
2030 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
2031 extra_options="${extra_options} rs6000/sysv4.opt"
2032 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
2036 tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/rtems.h rtems.h"
2037 extra_options="${extra_options} rs6000/sysv4.opt"
2038 tmake_file="rs6000/t-fprules rs6000/t-rtems t-rtems rs6000/t-ppccomm"
2040 powerpc-*-linux* | powerpc64-*-linux*)
2041 tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h rs6000/sysv4.h"
2042 extra_options="${extra_options} rs6000/sysv4.opt"
2043 tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
2046 powerpc64-*-linux*spe* | powerpc64-*-linux*paired*)
2047 echo "*** Configuration ${target} not supported" 1>&2
2050 powerpc-*-linux*spe* | powerpc-*-linux*paired*)
2054 test x$with_cpu != x || cpu_is_64bit=yes
2058 case ${maybe_biarch}:${enable_targets}:${cpu_is_64bit} in
2059 always:* | yes:*powerpc64* | yes:all:* | yes:*:yes)
2060 if test x$cpu_is_64bit = xyes; then
2061 tm_file="${tm_file} rs6000/default64.h"
2063 tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h glibc-stdint.h"
2064 tmake_file="$tmake_file rs6000/t-linux64"
2065 extra_options="${extra_options} rs6000/linux64.opt"
2068 tm_file="${tm_file} rs6000/linux.h glibc-stdint.h"
2072 powerpc*-*-linux*ppc476*)
2073 tm_file="${tm_file} rs6000/476.h"
2074 extra_options="${extra_options} rs6000/476.opt" ;;
2075 powerpc*-*-linux*altivec*)
2076 tm_file="${tm_file} rs6000/linuxaltivec.h" ;;
2077 powerpc*-*-linux*spe*)
2078 tm_file="${tm_file} rs6000/linuxspe.h rs6000/e500.h" ;;
2079 powerpc*-*-linux*paired*)
2080 tm_file="${tm_file} rs6000/750cl.h" ;;
2082 if test x${enable_secureplt} = xyes; then
2083 tm_file="rs6000/secureplt.h ${tm_file}"
2086 powerpc-wrs-vxworks|powerpc-wrs-vxworksae)
2087 tm_file="${tm_file} elfos.h freebsd-spec.h rs6000/sysv4.h"
2088 tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-ppccomm rs6000/t-vxworks"
2089 extra_options="${extra_options} rs6000/sysv4.opt"
2090 extra_headers=ppc-asm.h
2093 tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/e500.h"
2094 tmake_file="${tmake_file} rs6000/t-vxworksae"
2097 tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h rs6000/e500.h"
2103 tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
2104 tmake_file="t-lynx rs6000/t-lynx"
2105 extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
2111 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h"
2112 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
2113 extra_options="${extra_options} rs6000/sysv4.opt"
2115 powerpcle-*-eabisim*)
2116 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
2117 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
2118 extra_options="${extra_options} rs6000/sysv4.opt"
2122 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h"
2123 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
2124 extra_options="${extra_options} rs6000/sysv4.opt"
2127 rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
2128 tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h rs6000/aix-stdint.h"
2129 tmake_file="rs6000/t-aix43 t-slibgcc"
2130 extra_options="${extra_options} rs6000/aix64.opt"
2133 use_gcc_stdint=provide
2136 rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
2137 tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h rs6000/aix-stdint.h"
2138 extra_options="${extra_options} rs6000/aix64.opt"
2139 tmake_file="rs6000/t-aix43 t-slibgcc"
2145 rs6000-ibm-aix5.2.* | powerpc-ibm-aix5.2.*)
2146 tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h rs6000/aix-stdint.h"
2147 tmake_file="rs6000/t-aix52 t-slibgcc"
2148 extra_options="${extra_options} rs6000/aix64.opt"
2154 rs6000-ibm-aix5.3.* | powerpc-ibm-aix5.3.*)
2155 tm_file="${tm_file} rs6000/aix.h rs6000/aix53.h rs6000/xcoff.h rs6000/aix-stdint.h"
2156 tmake_file="rs6000/t-aix52 t-slibgcc"
2157 extra_options="${extra_options} rs6000/aix64.opt"
2161 extra_headers=altivec.h
2163 rs6000-ibm-aix[6789].* | powerpc-ibm-aix[6789].*)
2164 tm_file="${tm_file} rs6000/aix.h rs6000/aix61.h rs6000/xcoff.h rs6000/aix-stdint.h"
2165 tmake_file="rs6000/t-aix52 t-slibgcc"
2166 extra_options="${extra_options} rs6000/aix64.opt"
2170 extra_headers=altivec.h
2173 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
2174 target_has_targetm_common=no
2175 c_target_objs="rl78-c.o"
2176 cxx_target_objs="rl78-c.o"
2177 tmake_file="${tmake_file} rl78/t-rl78"
2180 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
2181 tmake_file="${tmake_file} rx/t-rx"
2184 tm_file="s390/s390.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h"
2185 if test x$enable_targets = xall; then
2186 tmake_file="${tmake_file} s390/t-linux64"
2190 tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h"
2191 tm_p_file=s390/s390-protos.h
2192 md_file=s390/s390.md
2193 extra_modes=s390/s390-modes.def
2194 out_file=s390/s390.c
2195 tmake_file="${tmake_file} s390/t-linux64"
2198 tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h s390/tpf.h"
2199 tm_p_file=s390/s390-protos.h
2200 md_file=s390/s390.md
2201 extra_modes=s390/s390-modes.def
2202 out_file=s390/s390.c
2204 extra_options="${extra_options} s390/tpf.opt"
2205 extra_headers=../../../libgcc/unwind-pe.h
2210 tm_file="dbxelf.h elfos.h score/elf.h score/score.h newlib-stdint.h"
2212 sh-*-elf* | sh[12346l]*-*-elf* | \
2213 sh-*-linux* | sh[2346lbe]*-*-linux* | \
2214 sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
2215 sh64-*-netbsd* | sh64l*-*-netbsd*)
2216 tmake_file="${tmake_file} sh/t-sh sh/t-elf"
2217 if test x${with_endian} = x; then
2219 sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;;
2220 shbe-*-* | sheb-*-*) with_endian=big,little ;;
2221 sh[1234]l* | sh[34]*-*-linux*) with_endian=little ;;
2222 shl* | sh64l* | sh*-*-linux* | \
2223 sh5l* | sh-superh-elf) with_endian=little,big ;;
2224 sh[1234]*-*-*) with_endian=big ;;
2225 *) with_endian=big,little ;;
2228 # TM_ENDIAN_CONFIG is used by t-sh to determine multilibs.
2229 # First word : the default endian.
2230 # Second word: the secondary endian (optional).
2231 case ${with_endian} in
2232 big) TM_ENDIAN_CONFIG=mb ;;
2233 little) TM_ENDIAN_CONFIG=ml ;;
2234 big,little) TM_ENDIAN_CONFIG="mb ml" ;;
2235 little,big) TM_ENDIAN_CONFIG="ml mb" ;;
2236 *) echo "with_endian=${with_endian} not supported."; exit 1 ;;
2238 case ${with_endian} in
2239 little*) tm_file="sh/little.h ${tm_file}" ;;
2241 tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h"
2243 sh*-*-linux*) tmake_file="${tmake_file} sh/t-linux"
2244 tm_file="${tm_file} gnu-user.h linux.h glibc-stdint.h sh/linux.h" ;;
2246 tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h"
2247 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
2250 sh*-superh-elf) if test x$with_libgloss != xno; then
2252 tm_file="${tm_file} sh/newlib.h"
2254 tm_file="${tm_file} sh/embed-elf.h"
2255 tm_file="${tm_file} sh/superh.h"
2256 extra_options="${extra_options} sh/superh.opt" ;;
2257 *) if test x$with_newlib = xyes \
2258 && test x$with_libgloss = xyes; then
2259 tm_file="${tm_file} sh/newlib.h"
2261 tm_file="${tm_file} sh/embed-elf.h" ;;
2265 # SHmedia, 32-bit ABI
2266 tmake_file="${tmake_file} sh/t-sh64"
2269 # SHmedia, 64-bit ABI
2270 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd-sh5-64"
2275 tmake_file="${tmake_file} sh/t-sh64"
2276 tm_file="${tm_file} sh/sh64.h"
2277 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2280 tmake_file="${tmake_file} sh/t-sh64"
2281 tm_file="${tm_file} sh/sh64.h"
2282 if test x$with_newlib = xyes; then
2283 tm_file="${tm_file} newlib-stdint.h"
2285 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2288 tm_file="${tm_file} newlib-stdint.h"
2291 # sed el/eb endian suffixes away to avoid confusion with sh[23]e
2292 case `echo ${target} | sed 's/e[lb]-/-/'` in
2293 sh64*-*-netbsd*) sh_cpu_target=sh5-64media ;;
2294 sh64* | sh5*-*-netbsd*) sh_cpu_target=sh5-32media ;;
2295 sh4a_single_only*) sh_cpu_target=sh4a-single-only ;;
2296 sh4a_single*) sh_cpu_target=sh4a-single ;;
2297 sh4a_nofpu*) sh_cpu_target=sh4a-nofpu ;;
2298 sh4al) sh_cpu_target=sh4al ;;
2299 sh4a*) sh_cpu_target=sh4a ;;
2300 sh4_single_only*) sh_cpu_target=sh4-single-only ;;
2301 sh4_single*) sh_cpu_target=sh4-single ;;
2302 sh4_nofpu*) sh_cpu_target=sh4-nofpu ;;
2303 sh4* | sh-superh-*) sh_cpu_target=sh4 ;;
2304 sh3e*) sh_cpu_target=sh3e ;;
2305 sh*-*-netbsd* | sh3*) sh_cpu_target=sh3 ;;
2306 sh2a_single_only*) sh_cpu_target=sh2a-single-only ;;
2307 sh2a_single*) sh_cpu_target=sh2a-single ;;
2308 sh2a_nofpu*) sh_cpu_target=sh2a-nofpu ;;
2309 sh2a*) sh_cpu_target=sh2a ;;
2310 sh2e*) sh_cpu_target=sh2e ;;
2311 sh2*) sh_cpu_target=sh2 ;;
2312 *) sh_cpu_target=sh1 ;;
2314 # did the user say --without-fp ?
2315 if test x$with_fp = xno; then
2316 case ${sh_cpu_target} in
2317 sh5-*media) sh_cpu_target=${sh_cpu_target}-nofpu ;;
2319 sh4a* ) sh_cpu_target=sh4a-nofpu ;;
2320 sh4*) sh_cpu_target=sh4-nofpu ;;
2321 sh3*) sh_cpu_target=sh3 ;;
2322 sh2a*) sh_cpu_target=sh2a-nofpu ;;
2323 sh2*) sh_cpu_target=sh2 ;;
2324 *) echo --without-fp not available for $target: ignored
2326 tm_defines="$tm_defines STRICT_NOFPU=1"
2328 sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`"
2329 case $sh_cpu_default in
2330 sh5-64media-nofpu | sh5-64media | \
2331 sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \
2332 sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
2333 sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
2334 sh4-single-only | sh4-single | sh4-nofpu | sh4 | sh4-300 | \
2335 sh3e | sh3 | sh2e | sh2 | sh1) ;;
2336 "") sh_cpu_default=${sh_cpu_target} ;;
2337 *) echo "with_cpu=$with_cpu not supported"; exit 1 ;;
2339 sh_multilibs=${with_multilib_list}
2340 if test "$sh_multilibs" = "default" ; then
2342 sh64-superh-linux* | \
2343 sh[1234]*) sh_multilibs=${sh_cpu_target} ;;
2344 sh64* | sh5*) sh_multilibs=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu ;;
2345 sh-superh-*) sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;;
2346 sh*-*-linux*) sh_multilibs=m1,m3e,m4 ;;
2347 sh*-*-netbsd*) sh_multilibs=m3,m3e,m4 ;;
2348 *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single,m2a-single-only ;;
2350 if test x$with_fp = xno; then
2351 sh_multilibs="`echo $sh_multilibs|sed -e s/m4/sh4-nofpu/ -e s/,m4-[^,]*//g -e s/,m[23]e// -e s/m2a,m2a-single/m2a-nofpu/ -e s/m5-..m....,//g`"
2354 target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`
2355 tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"'
2356 tm_defines="$tm_defines SUPPORT_`echo $sh_cpu_default | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
2357 sh_multilibs=`echo $sh_multilibs | sed -e 's/,/ /g' -e 's/^[Ss][Hh]/m/' -e 's/ [Ss][Hh]/ m/g' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-`
2358 for sh_multilib in ${sh_multilibs}; do
2359 case ${sh_multilib} in
2360 m1 | m2 | m2e | m3 | m3e | \
2361 m4 | m4-single | m4-single-only | m4-nofpu | m4-300 |\
2362 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al | \
2363 m2a | m2a-single | m2a-single-only | m2a-nofpu | \
2364 m5-64media | m5-64media-nofpu | \
2365 m5-32media | m5-32media-nofpu | \
2366 m5-compact | m5-compact-nofpu)
2367 # TM_MULTILIB_CONFIG is used by t-sh for the non-endian multilib definition
2368 # It is passed to MULTIILIB_OPTIONS verbatim.
2369 TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG}/${sh_multilib}"
2370 tm_defines="$tm_defines SUPPORT_`echo $sh_multilib | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
2372 \!*) # TM_MULTILIB_EXCEPTIONS_CONFIG is used by t-sh
2373 # It is passed the MULTILIB_EXCEPTIONS verbatim.
2374 TM_MULTILIB_EXCEPTIONS_CONFIG="${TM_MULTILIB_EXCEPTIONS_CONFIG} `echo $sh_multilib | sed 's/^!//'`" ;;
2376 echo "with_multilib_list=${sh_multilib} not supported."
2381 TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's:^/::'`
2382 if test x${enable_incomplete_targets} = xyes ; then
2383 tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1"
2385 tm_file="$tm_file ./sysroot-suffix.h"
2386 tmake_file="$tmake_file t-sysroot-suffix"
2389 tmake_file="sh/t-sh t-rtems sh/t-rtems"
2390 tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h newlib-stdint.h"
2393 tmake_file="$tmake_file sh/t-sh sh/t-vxworks"
2394 tm_file="${tm_file} elfos.h sh/elf.h sh/embed-elf.h vx-common.h vxworks.h sh/vxworks.h"
2397 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp-elf.h"
2400 tmake_file="sparc/t-sparc sparc/t-leon"
2403 tmake_file="sparc/t-sparc sparc/t-leon3"
2406 tmake_file="sparc/t-sparc sparc/t-elf"
2411 tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h newlib-stdint.h"
2412 tmake_file="sparc/t-sparc sparc/t-elf t-rtems"
2415 tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/tso.h"
2416 extra_options="${extra_options} sparc/long-double-switch.opt"
2419 tmake_file="${tmake_file} sparc/t-sparc sparc/t-leon"
2422 tmake_file="${tmake_file} sparc/t-sparc sparc/t-leon3"
2425 tmake_file="${tmake_file} sparc/t-sparc"
2428 if test x$enable_targets = xall; then
2429 tm_file="sparc/biarch64.h ${tm_file} sparc/linux64.h"
2430 tmake_file="${tmake_file} sparc/t-linux64"
2432 tm_file="${tm_file} sparc/linux.h"
2436 tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2437 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
2438 extra_options="${extra_options} sparc/long-double-switch.opt"
2439 tmake_file="${tmake_file} sparc/t-sparc"
2442 tm_file="sparc/biarch64.h ${tm_file} ${sol2_tm_file} sol2-bi.h sparc/tso.h"
2444 sparc64-*-* | sparcv9-*-*)
2445 tm_file="sparc/default-64.h ${tm_file}"
2448 test x$with_cpu != x || with_cpu=v9
2451 tmake_file="${tmake_file} sparc/t-sparc sparc/t-sol2-64"
2454 tm_file="${tm_file} elfos.h sparc/sysv4.h vx-common.h vxworks.h sparc/vxworks.h"
2455 tmake_file="${tmake_file} sparc/t-sparc sparc/t-vxworks"
2458 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h"
2459 extra_options="${extra_options}"
2460 tmake_file="${tmake_file} sparc/t-sparc"
2463 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h sparc/rtemself.h rtems.h"
2464 extra_options="${extra_options}"
2465 tmake_file="${tmake_file} sparc/t-sparc t-rtems"
2468 tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/default-64.h sparc/linux64.h sparc/tso.h"
2469 extra_options="${extra_options} sparc/long-double-switch.opt"
2470 tmake_file="${tmake_file} sparc/t-sparc sparc/t-linux64"
2472 sparc64-*-freebsd*|ultrasparc-*-freebsd*)
2473 tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
2474 extra_options="${extra_options} sparc/long-double-switch.opt"
2475 case "x$with_cpu" in
2477 x) with_cpu=ultrasparc ;;
2478 *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
2480 tmake_file="${tmake_file} sparc/t-sparc"
2483 tm_file="sparc/biarch64.h ${tm_file}"
2484 tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2485 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
2486 extra_options="${extra_options} sparc/long-double-switch.opt"
2487 tmake_file="${tmake_file} sparc/t-sparc sparc/t-netbsd64"
2490 tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/sp64-elf.h"
2491 tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h sparc/openbsd64.h"
2492 extra_options="${extra_options} openbsd.opt"
2493 extra_options="${extra_options}"
2496 tmake_file="${tmake_file} sparc/t-sparc"
2499 tm_file="dbxelf.h elfos.h spu/spu-elf.h spu/spu.h newlib-stdint.h"
2500 tmake_file="spu/t-spu-elf"
2501 native_system_header_dir=/include
2502 extra_headers="spu_intrinsics.h spu_internals.h vmx2spu.h spu_mfcio.h vec_types.h spu_cache.h"
2503 extra_modes=spu/spu-modes.def
2504 c_target_objs="${c_target_objs} spu-c.o"
2505 cxx_target_objs="${cxx_target_objs} spu-c.o"
2508 tm_file="elfos.h ${tm_file} c6x/elf-common.h c6x/elf.h"
2509 tm_file="${tm_file} dbxelf.h tm-dwarf2.h newlib-stdint.h"
2510 tmake_file="c6x/t-c6x c6x/t-c6x-elf"
2514 tm_file="elfos.h ${tm_file} gnu-user.h linux.h c6x/elf-common.h c6x/uclinux-elf.h"
2515 tm_file="${tm_file} dbxelf.h tm-dwarf2.h glibc-stdint.h"
2516 tm_file="${tm_file} ./sysroot-suffix.h"
2517 tmake_file="t-sysroot-suffix t-slibgcc"
2518 tmake_file="${tmake_file} c6x/t-c6x c6x/t-c6x-elf c6x/t-c6x-uclinux"
2522 tm_file="elfos.h gnu-user.h linux.h glibc-stdint.h tilegx/linux.h ${tm_file}"
2523 tmake_file="${tmake_file} tilegx/t-tilegx"
2524 extra_objs="mul-tables.o"
2525 c_target_objs="tilegx-c.o"
2526 cxx_target_objs="tilegx-c.o"
2529 tm_file="elfos.h gnu-user.h linux.h glibc-stdint.h tilepro/linux.h ${tm_file}"
2530 tmake_file="${tmake_file} tilepro/t-tilepro"
2531 extra_objs="mul-tables.o"
2532 c_target_objs="tilepro-c.o"
2533 cxx_target_objs="tilepro-c.o"
2536 target_cpu_default="TARGET_CPU_generic"
2537 tm_file="dbxelf.h elfos.h v850/v850.h"
2538 tm_file="${tm_file} rtems.h v850/rtems.h newlib-stdint.h"
2539 tmake_file="${tmake_file} v850/t-v850"
2540 tmake_file="${tmake_file} t-rtems v850/t-rtems"
2542 c_target_objs="v850-c.o"
2543 cxx_target_objs="v850-c.o"
2548 target_cpu_default="TARGET_CPU_v850e2v3"
2551 target_cpu_default="TARGET_CPU_v850e2"
2553 v850e1-*-* | v850es-*-*)
2554 target_cpu_default="TARGET_CPU_v850e1"
2557 target_cpu_default="TARGET_CPU_v850e"
2560 target_cpu_default="TARGET_CPU_generic"
2563 tm_file="dbxelf.h elfos.h newlib-stdint.h v850/v850.h"
2564 if test x$stabs = xyes
2566 tm_file="${tm_file} dbx.h"
2569 c_target_objs="v850-c.o"
2570 cxx_target_objs="v850-c.o"
2574 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h vax/elf.h vax/linux.h"
2575 extra_options="${extra_options} vax/elf.opt"
2578 tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
2579 extra_options="${extra_options} netbsd.opt netbsd-elf.opt vax/elf.opt"
2582 tm_file="vax/vax.h vax/openbsd1.h openbsd.h openbsd-stdint.h openbsd-pthread.h vax/openbsd.h"
2583 extra_options="${extra_options} openbsd.opt"
2587 # For historical reasons, the target files omit the 'x'.
2588 tm_file="dbxelf.h elfos.h newlib-stdint.h stormy16/stormy16.h"
2589 tm_p_file=stormy16/stormy16-protos.h
2590 md_file=stormy16/stormy16.md
2591 out_file=stormy16/stormy16.c
2592 extra_options=stormy16/stormy16.opt
2593 tmake_file="stormy16/t-stormy16"
2596 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h xtensa/elf.h"
2597 extra_options="${extra_options} xtensa/elf.opt"
2600 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h xtensa/linux.h"
2601 tmake_file="${tmake_file} xtensa/t-xtensa"
2604 tm_file="mn10300/mn10300.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h mn10300/linux.h"
2609 tm_file="dbxelf.h elfos.h ${tm_file} m32c/rtems.h rtems.h newlib-stdint.h"
2610 tmake_file="${tmake_file} t-rtems"
2611 c_target_objs="m32c-pragma.o"
2612 cxx_target_objs="m32c-pragma.o"
2615 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
2616 c_target_objs="m32c-pragma.o"
2617 cxx_target_objs="m32c-pragma.o"
2620 echo "*** Configuration ${target} not supported" 1>&2
2626 i[34567]86-*-linux* | x86_64-*-linux*)
2627 tmake_file="${tmake_file} i386/t-pmm_malloc i386/t-i386"
2629 i[34567]86-*-* | x86_64-*-*)
2630 tmake_file="${tmake_file} i386/t-gmm_malloc i386/t-i386"
2632 powerpc*-*-* | rs6000-*-*)
2633 tm_file="${tm_file} rs6000/option-defaults.h"
2636 if [ "$target_has_targetcm" = "no" ]; then
2637 c_target_objs="$c_target_objs default-c.o"
2638 cxx_target_objs="$cxx_target_objs default-c.o"
2641 if [ "$common_out_file" = "" ]; then
2642 if [ "$target_has_targetm_common" = "yes" ]; then
2643 common_out_file="$cpu_type/$cpu_type-common.c"
2645 common_out_file="default-common.c"
2649 # Support for --with-cpu and related options (and a few unrelated options,
2653 echo "--with-cpu must be passed a value" 1>&2
2658 # Set arch and cpu from ${target} and ${target_noncanonical}. Set cpu
2659 # to generic if there is no processor scheduler model for the target.
2662 arch_without_sse2=no
2663 arch_without_64bit=no
2666 if test $fbsd_major -ge 6; then
2672 arch_without_sse2=yes
2673 arch_without_64bit=yes
2678 arch_without_sse2=yes
2679 arch_without_64bit=yes
2684 arch_without_sse2=yes
2685 arch_without_64bit=yes
2688 arch_without_sse2=yes
2689 arch_without_64bit=yes
2690 case ${target_noncanonical} in
2703 pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
2713 i686-*-* | i786-*-*)
2714 case ${target_noncanonical} in
2727 amdfam10-*|barcelona-*)
2731 k8_sse3-*|opteron_sse3-*|athlon64_sse3-*)
2735 k8-*|opteron-*|athlon64-*|athlon_fx-*)
2739 athlon_xp-*|athlon_mp-*|athlon_4-*)
2742 arch_without_sse2=yes
2743 arch_without_64bit=yes
2745 athlon_tbird-*|athlon-*)
2748 arch_without_sse2=yes
2753 arch_without_sse2=yes
2758 arch_without_sse2=yes
2760 pentium3-*|pentium3m-*)
2763 arch_without_sse2=yes
2765 pentium4-*|pentium4m-*)
2800 arch_without_sse2=yes
2805 arch_without_sse2=yes
2806 arch_without_64bit=yes
2811 case ${target_noncanonical} in
2824 amdfam10-*|barcelona-*)
2828 k8_sse3-*|opteron_sse3-*|athlon64_sse3-*)
2832 k8-*|opteron-*|athlon_64-*)
2860 # If there is no $with_cpu option, try to infer one from ${target}.
2861 # This block sets nothing except for with_cpu.
2862 if test x$with_cpu = x ; then
2864 i[34567]86-*-*|x86_64-*-*)
2882 frv-*-*linux* | frv400-*-*linux*)
2889 case "$with_arch" in
2891 with_cpu=${default_cf_cpu}
2894 with_cpu=m${default_m68k_cpu}
2905 with_cpu="`echo ${target} | sed 's/-.*$//'`"
2909 # Avoid overriding --with-cpu-32 and --with-cpu-64 values.
2911 i[34567]86-*-*|x86_64-*-*)
2912 if test x$with_cpu_32 != x || test x$with_cpu_64 != x; then
2913 if test x$with_cpu_32 = x; then
2914 with_cpu_32=$with_cpu
2916 if test x$with_cpu_64 = x; then
2917 with_cpu_64=$with_cpu
2925 # Support for --with-arch and related options (and a few unrelated options,
2927 case ${with_arch} in
2929 echo "--with-arch must be passed a value" 1>&2
2934 # If there is no $with_arch option, try to infer one from ${target}.
2935 # This block sets nothing except for with_arch.
2936 if test x$with_arch = x ; then
2938 i[34567]86-*-darwin*|x86_64-*-darwin*)
2939 # Default arch is set via TARGET_SUBTARGET32_ISA_DEFAULT
2940 # and TARGET_SUBTARGET64_ISA_DEFAULT in config/i386/darwin.h.
2943 # --with-fpmath sets the default ISA to SSE2, which is the same
2944 # ISA supported by Pentium 4.
2945 if test x$with_fpmath = x || test $arch_without_sse2 = no; then
2956 # Avoid overriding --with-arch-32 and --with-arch-64 values.
2958 i[34567]86-*-darwin*|x86_64-*-darwin*)
2959 # Default arch is set via TARGET_SUBTARGET32_ISA_DEFAULT
2960 # and TARGET_SUBTARGET64_ISA_DEFAULT in config/i386/darwin.h.
2962 i[34567]86-*-*|x86_64-*-*)
2963 if test x$with_arch_32 != x || test x$with_arch_64 != x; then
2964 if test x$with_arch_32 = x; then
2965 with_arch_32=$with_arch
2967 if test x$with_arch_64 = x; then
2968 if test $arch_without_64bit = yes; then
2969 # Set the default 64bit arch to x86-64 if the default arch
2970 # doesn't support 64bit.
2973 with_arch_64=$with_arch
2977 elif test $arch_without_64bit$need_64bit_isa = yesyes; then
2978 # Set the default 64bit arch to x86-64 if the default arch
2979 # doesn't support 64bit and we need 64bit ISA.
2980 with_arch_32=$with_arch
2988 # Support --with-fpmath.
2989 if test x$with_fpmath != x; then
2991 i[34567]86-*-* | x86_64-*-*)
2992 case ${with_fpmath} in
2994 tm_file="${tm_file} i386/avxmath.h"
2997 tm_file="${tm_file} i386/ssemath.h"
3000 echo "Invalid --with-fpmath=$with_fpmath" 1>&2
3006 echo "--with-fpmath isn't supported for $target." 1>&2
3012 # Similarly for --with-schedule.
3013 if test x$with_schedule = x; then
3016 # Override default PA8000 scheduling model.
3017 with_schedule=7100LC
3022 # Validate and mark as valid any --with options supported
3023 # by this target. In order to use a particular --with option
3024 # you must list it in supported_defaults; validating the value
3025 # is optional. This case statement should set nothing besides
3026 # supported_defaults.
3031 supported_defaults="cpu tune"
3032 for which in cpu tune; do
3033 eval "val=\$with_$which"
3036 | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \
3037 | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \
3041 echo "Unknown CPU used in --with-$which=$val" 1>&2
3049 supported_defaults="arch cpu float tune fpu abi mode tls"
3050 for which in cpu tune; do
3051 # See if it matches any of the entries in arm-cores.def
3052 eval "val=\$with_$which"
3053 if [ x"$val" = x ] \
3054 || grep "^ARM_CORE(\"$val\"," \
3055 ${srcdir}/config/arm/arm-cores.def \
3058 new_val=`grep "^ARM_CORE(\"$val\"," \
3059 ${srcdir}/config/arm/arm-cores.def | \
3060 sed -e 's/^[^,]*,[ ]*//' | \
3062 eval "target_${which}_cname=$new_val"
3063 echo "For $val real value is $new_val"
3066 echo "Unknown CPU used in --with-$which=$val" 1>&2
3071 case "$with_arch" in
3073 | armv[23456] | armv2a | armv3m | armv4t | armv5t \
3074 | armv5te | armv6j |armv6k | armv6z | armv6zk | armv6-m \
3075 | armv7 | armv7-a | armv7-r | armv7-m \
3080 echo "Unknown arch used in --with-arch=$with_arch" 1>&2
3085 case "$with_float" in
3087 | soft | hard | softfp)
3091 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
3098 | vfp | vfp3 | vfpv3 \
3099 | vfpv3-fp16 | vfpv3-d16 | vfpv3-d16-fp16 | vfpv3xd \
3100 | vfpv3xd-fp16 | neon | neon-fp16 | vfpv4 | vfpv4-d16 \
3101 | fpv4-sp-d16 | neon-vfpv4)
3104 fpa | fpe2 | fpe3 | maverick)
3105 if test "x$enable_obsolete" != xyes; then
3106 echo "*** Configuration option --with-fpu=${with_fpu} is obsolete." >&2
3107 echo "*** Specify --enable-obsolete to build it anyway." >&2
3108 echo "*** Support will be REMOVED in the next major release of GCC." >&2
3113 echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1
3120 | apcs-gnu | atpcs | aapcs | iwmmxt | aapcs-linux )
3124 echo "Unknown ABI used in --with-abi=$with_abi"
3129 case "$with_mode" in
3135 echo "Unknown mode used in --with-mode=$with_mode"
3146 echo "Unknown TLS method used in --with-tls=$with_tls" 1>&2
3151 if test "x$with_arch" != x && test "x$with_cpu" != x; then
3152 echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2
3157 supported_defaults=cpu
3162 echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
3168 fido-*-* | m68k*-*-*)
3169 supported_defaults="arch cpu"
3170 case "$with_arch" in
3172 m68k_arch_family="$with_arch"
3175 echo "Invalid --with-arch=$with_arch" 1>&2
3180 # We always have a $with_cpu setting here.
3182 "m68000" | "m68010" | "m68020" | "m68030" | "m68040" | "m68060")
3183 m68k_cpu_ident=$with_cpu
3186 m68k_cpu_ident=m68020
3187 tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_40"
3190 m68k_cpu_ident=m68020
3191 tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_60"
3194 # We need the C identifier rather than the string.
3195 m68k_cpu_ident=`awk -v arg="\"$with_cpu\"" \
3196 'BEGIN { FS="[ \t]*[,()][ \t]*" }; \
3197 $1 == "M68K_DEVICE" && $2 == arg { print $3 }' \
3198 ${srcdir}/config/m68k/m68k-devices.def`
3199 if [ x"$m68k_cpu_ident" = x ] ; then
3200 echo "Unknown CPU used in --with-cpu=$with_cpu" 1>&2
3203 with_cpu="mcpu=$with_cpu"
3209 supported_defaults="arch schedule"
3211 case "$with_arch" in
3212 "" | 1.0 | 1.1 | 2.0)
3216 echo "Unknown architecture used in --with-arch=$with_arch" 1>&2
3221 case "$with_schedule" in
3222 "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000)
3226 echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2
3232 i[34567]86-*-* | x86_64-*-*)
3233 supported_defaults="arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64"
3234 for which in arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64; do
3235 eval "val=\$with_$which"
3238 | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \
3239 | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
3240 | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
3241 | athlon-4 | athlon-xp | athlon-mp | geode \
3242 | prescott | pentium-m | pentium4m | pentium3m)
3249 echo "CPU given in --with-$which=$val doesn't support 64bit mode." 1>&2
3257 "" | x86-64 | generic | native \
3258 | k8 | k8-sse3 | athlon64 | athlon64-sse3 | opteron \
3259 | opteron-sse3 | athlon-fx | bdver2 | bdver1 | btver1 \
3260 | amdfam10 | barcelona | nocona | core2 | corei7 \
3261 | corei7-avx | core-avx-i | core-avx2 | atom)
3265 echo "Unknown CPU given in --with-$which=$val." 1>&2
3273 supported_defaults="abi arch arch_32 arch_64 float tune tune_32 tune_64 divide llsc mips-plt synci"
3275 case ${with_float} in
3280 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
3286 "" | 32 | o64 | n32 | 64 | eabi)
3290 echo "Unknown ABI used in --with-abi=$with_abi" 1>&2
3295 case ${with_divide} in
3296 "" | breaks | traps)
3300 echo "Unknown division check type use in --with-divide=$with_divide" 1>&2
3305 case ${with_llsc} in
3316 echo "Unknown llsc type used in --with-llsc" 1>&2
3321 case ${with_mips_plt} in
3326 with_mips_plt=no-plt
3331 echo "Unknown --with-mips-plt argument: $with_mips_plt" 1>&2
3336 case ${with_synci} in
3341 # No is the default.
3345 echo "Unknown synci type used in --with-synci" 1>&2
3351 powerpc*-*-* | rs6000-*-*)
3352 supported_defaults="cpu cpu_32 cpu_64 float tune tune_32 tune_64"
3354 for which in cpu cpu_32 cpu_64 tune tune_32 tune_64; do
3355 eval "val=\$with_$which"
3357 default32 | default64)
3362 echo "$val only valid for --with-cpu and --with-tune." 1>&2
3366 with_which="with_$which"
3370 tm_defines="${tm_defines} CONFIG_PPC405CR"
3371 eval "with_$which=405"
3374 | power | power[234567] | power6x | powerpc | powerpc64 \
3375 | rios | rios1 | rios2 | rsc | rsc1 | rs64a \
3376 | 401 | 403 | 405 | 405fp | 440 | 440fp | 464 | 464fp \
3377 | 476 | 476fp | 505 | 601 | 602 | 603 | 603e | ec603e \
3378 | 604 | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
3379 | a2 | e300c[23] | 854[08] | e500mc | e500mc64 | titan\
3380 | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5 | cell)
3384 echo "Unknown cpu used in --with-$which=$val." 1>&2
3392 supported_defaults="arch mode tune"
3394 for which in arch tune; do
3395 eval "val=\$with_$which"
3397 "" | g5 | g6 | z900 | z990 | z9-109 | z9-ec | z10 | z196)
3401 echo "Unknown cpu used in --with-$which=$val." 1>&2
3407 case ${with_mode} in
3412 echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2
3418 sh[123456ble]-*-* | sh-*-*)
3419 supported_defaults="cpu"
3420 case "`echo $with_cpu | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz- | sed s/sh/m/`" in
3421 "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu )
3424 m2a | m2a-single | m2a-single-only | m2a-nofpu)
3426 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al)
3429 echo "Unknown CPU used in --with-cpu=$with_cpu, known values:" 1>&2
3430 echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2
3431 echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2
3432 echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2
3438 supported_defaults="cpu float tune"
3440 for which in cpu tune; do
3441 eval "val=\$with_$which"
3443 "" | sparc | sparcv9 | sparc64 \
3445 | v8 | supersparc | hypersparc | leon \
3446 | sparclite | f930 | f934 | sparclite86x \
3447 | sparclet | tsc701 \
3448 | v9 | ultrasparc | ultrasparc3 | niagara | niagara2 \
3449 | niagara3 | niagara4)
3453 echo "Unknown cpu used in --with-$which=$val" 1>&2
3459 case ${with_float} in
3464 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
3471 supported_defaults="arch tune"
3473 for which in arch tune; do
3474 eval "val=\$with_$which"
3476 "" | cell | celledp)
3480 echo "Unknown cpu used in --with-$which=$val." 1>&2
3488 supported_defaults="arch"
3490 case ${with_arch} in
3491 "" | c62x | c64x | c64x+ | c67x | c67x+ | c674x)
3495 echo "Unknown arch used in --with-arch=$with_arch." 1>&2
3502 supported_defaults=cpu
3504 "" | v850e | v850e1 | v850e2 | v850es | v850e2v3)
3508 echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
3515 # Set some miscellaneous flags for particular targets.
3516 target_cpu_default2=
3519 if test x$gas = xyes
3521 target_cpu_default2="MASK_GAS"
3526 if test x$target_cpu_cname = x
3528 target_cpu_default2=TARGET_CPU_generic
3530 target_cpu_default2=TARGET_CPU_$target_cpu_cname
3535 target_cpu_default2="MASK_BIG_SWITCH"
3536 if test x$gas = xyes
3538 target_cpu_default2="${target_cpu_default2}|MASK_GAS|MASK_JUMP_IN_DELAY"
3542 fido*-*-* | m68k*-*-*)
3543 target_cpu_default2=$m68k_cpu_ident
3544 tmake_file="m68k/t-opts $tmake_file"
3545 if [ x"$m68k_arch_family" != x ]; then
3546 tmake_file="m68k/t-$m68k_arch_family $tmake_file"
3550 i[34567]86-*-darwin* | x86_64-*-darwin*)
3552 i[34567]86-*-linux* | x86_64-*-linux* | \
3553 i[34567]86-*-kfreebsd*-gnu | x86_64-*-kfreebsd*-gnu | \
3556 i[34567]86-*-solaris2* | x86_64-*-solaris2.1[0-9]*)
3558 i[34567]86-*-cygwin* | i[34567]86-*-mingw* | x86_64-*-mingw*)
3560 i[34567]86-*-freebsd* | x86_64-*-freebsd*)
3566 if test x$gnu_ld = xyes
3568 target_cpu_default2="MASK_SPLIT_ADDRESSES"
3572 tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
3575 tmake_file="mips/t-mips $tmake_file"
3578 powerpc*-*-* | rs6000-*-*)
3579 # FIXME: The PowerPC port uses the value set at compile time,
3580 # although it's only cosmetic.
3581 if test "x$with_cpu" != x
3583 target_cpu_default2="\\\"$with_cpu\\\""
3585 out_file=rs6000/rs6000.c
3586 c_target_objs="${c_target_objs} rs6000-c.o"
3587 cxx_target_objs="${cxx_target_objs} rs6000-c.o"
3588 tmake_file="rs6000/t-rs6000 ${tmake_file}"
3590 if test x$enable_e500_double = xyes
3592 tm_file="$tm_file rs6000/e500-double.h"
3596 sh[123456ble]*-*-* | sh-*-*)
3597 c_target_objs="${c_target_objs} sh-c.o"
3598 cxx_target_objs="${cxx_target_objs} sh-c.o"
3602 if test x$with_tune = x ; then
3606 # The SPARC port checks this value at compile-time.
3607 target_cpu_default2="TARGET_CPU_$with_cpu"
3611 # Some standard aliases.
3616 xsparcv9 | xsparc64)
3621 # The SPARC port checks this value at compile-time.
3622 target_cpu_default2="TARGET_CPU_$with_cpu"
3626 case "x$with_cpu" in
3629 xv850e | xv850e1 | xv850e2 | xv850e2v3)
3630 target_cpu_default2="TARGET_CPU_$with_cpu"
3633 target_cpu_default2="TARGET_CPU_v850e1"
3640 all_defaults="abi cpu cpu_32 cpu_64 arch arch_32 arch_64 tune tune_32 tune_64 schedule float mode fpu divide llsc mips-plt synci tls"
3641 for option in $all_defaults
3643 eval "val=\$with_"`echo $option | sed s/-/_/g`
3644 if test -n "$val"; then
3645 case " $supported_defaults " in
3649 echo "This target does not support --with-$option." 2>&1
3650 echo "Valid --with options are: $supported_defaults" 2>&1
3657 t="{ \"$option\", \"$val\" }"
3659 t="${t}, { \"$option\", \"$val\" }"
3666 configure_default_options="{ { NULL, NULL} }"
3668 configure_default_options="{ ${t} }"
3671 if test "$target_cpu_default2" != ""
3673 if test "$target_cpu_default" != ""
3675 target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
3677 target_cpu_default=$target_cpu_default2