OSDN Git Service

gcc/
[pf3gnuchains/gcc-fork.git] / gcc / config.gcc
1 # GCC target-specific configuration file.
2 # Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
3 # Free Software Foundation, Inc.
4
5 #This file is part of GCC.
6
7 #GCC is free software; you can redistribute it and/or modify it under
8 #the terms of the GNU General Public License as published by the Free
9 #Software Foundation; either version 2, or (at your option) any later
10 #version.
11
12 #GCC is distributed in the hope that it will be useful, but WITHOUT
13 #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 #FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
15 #for more details.
16
17 #You should have received a copy of the GNU General Public License
18 #along with GCC; see the file COPYING.  If not, write to the Free
19 #Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
20 #02110-1301, USA.
21
22 # This is the GCC target-specific configuration file
23 # where a configuration type is mapped to different system-specific
24 # definitions and files.  This is invoked by the autoconf-generated
25 # configure script.  Putting it in a separate shell file lets us skip
26 # running autoconf when modifying target-specific information.
27
28 # When you change the cases in the OS or target switches, consider
29 # updating ../libgcc/config.host also.
30
31 # This file switches on the shell variable ${target}, and also uses the
32 # following shell variables:
33 #
34 #  with_*               Various variables as set by configure.
35 #
36 #  enable_threads       Either the name, yes or no depending on whether
37 #                       threads support was requested.
38 #
39 #  default_use_cxa_atexit
40 #                         The default value for the $enable___cxa_atexit
41 #                       variable.  enable___cxa_atexit needs to be set to
42 #                       "yes" for the correct operation of C++ destructors
43 #                       but it relies upon the presence of a non-standard C
44 #                       library function called __cxa_atexit.
45 #                         Since not all C libraries provide __cxa_atexit the
46 #                       default value of $default_use_cxa_atexit is set to
47 #                       "no" except for targets which are known to be OK.
48 #
49 #  gas_flag             Either yes or no depending on whether GNU as was
50 #                       requested.
51 #
52 #  gnu_ld_flag          Either yes or no depending on whether GNU ld was
53 #                       requested.
54
55 # This file sets the following shell variables for use by the
56 # autoconf-generated configure script:
57 #
58 #  cpu_type             The name of the cpu, if different from the first
59 #                       chunk of the canonical target name.
60 #
61 #  tm_defines           List of target macros to define for all compilations.
62 #
63 #  tm_file              A list of target macro files, if different from
64 #                       "$cpu_type/$cpu_type.h". Usually it's constructed
65 #                       per target in a way like this:
66 #                       tm_file="${tm_file} dbxelf.h elfos.h svr4.h ${cpu_type.h}/elf.h"
67 #                       Note that the preferred order is:
68 #                       - specific target header "${cpu_type}/${cpu_type.h}"
69 #                       - generic headers like dbxelf.h elfos.h, etc.
70 #                       - specializing target headers like ${cpu_type.h}/elf.h
71 #                       This helps to keep OS specific stuff out of the CPU
72 #                       defining header ${cpu_type}/${cpu_type.h}.
73 #
74 #  tm_p_file            Location of file with declarations for functions
75 #                       in $out_file.
76 #
77 #  out_file             The name of the machine description C support
78 #                       file, if different from "$cpu_type/$cpu_type.c".
79 #
80 #  md_file              The name of the machine-description file, if
81 #                       different from "$cpu_type/$cpu_type.md".
82 #
83 #  tmake_file           A list of machine-description-specific
84 #                       makefile-fragments, if different from
85 #                       "$cpu_type/t-$cpu_type".
86 #
87 #  extra_modes          The name of the file containing a list of extra
88 #                       machine modes, if necessary and different from
89 #                       "$cpu_type/$cpu_type-modes.def".
90 #
91 #  extra_objs           List of extra objects that should be linked into
92 #                       the compiler proper (cc1, cc1obj, cc1plus)
93 #                       depending on target.
94 #
95 #  extra_gcc_objs       List of extra objects that should be linked into
96 #                       the compiler driver (gcc) depending on target.
97 #
98 #  extra_headers        List of used header files from the directory
99 #                       config/${cpu_type}.
100 #
101 #  extra_passes         List of extra executables compiled for this target
102 #                       machine, used for compiling from source to object.
103 #
104 #  extra_parts          List of extra object files that should be compiled
105 #                       for this target machine.
106 #
107 #  extra_programs       Like extra_passes, but these are used when linking.
108 #
109 #  extra_options        List of target-dependent .opt files.
110 #
111 #  c_target_objs        List of extra target-dependent objects that be
112 #                       linked into the C compiler only.
113 #
114 #  cxx_target_objs      List of extra target-dependent objects that be
115 #                       linked into the C++ compiler only.
116 #
117 #  target_gtfiles       List of extra source files with type information.
118 #
119 #  xm_defines           List of macros to define when compiling for the
120 #                       target machine.
121 #
122 #  xm_file              List of files to include when compiling for the
123 #                       target machine.
124 #
125 #  use_collect2         Set to yes or no, depending on whether collect2
126 #                       will be used.
127 #
128 #  target_cpu_default   Set to override the default target model.
129 #
130 #  gdb_needs_out_file_path
131 #                       Set to yes if gdb needs a dir command with
132 #                       `dirname $out_file`.
133 #
134 #  thread_file          Set to control which thread package to use.
135 #
136 #  gas                  Set to yes or no depending on whether the target
137 #                       system normally uses GNU as.
138 #
139 #  need_64bit_hwint     Set to yes if HOST_WIDE_INT must be 64 bits wide
140 #                       for this target.  This is true iff this target
141 #                       supports "long" or "wchar_t" wider than 32 bits.
142 #
143 #  configure_default_options
144 #                       Set to an initializer for configure_default_options
145 #                       in configargs.h, based on --with-cpu et cetera.
146 #
147 #  use_fixproto         Set to "yes" if fixproto should be run normally,
148 #                       "no" if fixproto should never be run.
149
150 # The following variables are used in each case-construct to build up the
151 # outgoing variables:
152 #
153 #  gnu_ld               Set to yes or no depending on whether the target
154 #                       system normally uses GNU ld.
155
156 out_file=
157 tmake_file=
158 extra_headers=
159 extra_passes=
160 extra_parts=
161 extra_programs=
162 extra_objs=
163 extra_gcc_objs=
164 extra_options=
165 c_target_objs=
166 cxx_target_objs=
167 tm_defines=
168 xm_defines=
169 # Set this to force installation and use of collect2.
170 use_collect2=
171 # Set this to override the default target model.
172 target_cpu_default=
173 # Set this if gdb needs a dir command with `dirname $out_file`
174 gdb_needs_out_file_path=
175 # Set this to control which thread package will be used.
176 thread_file=
177 # Reinitialize these from the flag values every loop pass, since some
178 # configure entries modify them.
179 gas="$gas_flag"
180 gnu_ld="$gnu_ld_flag"
181 default_use_cxa_atexit=no
182 target_gtfiles=
183 need_64bit_hwint=
184
185 # Default to not using fixproto.  Targets which need fixproto should
186 # specifically set this to 'yes'.
187 use_fixproto=no
188
189 # Don't carry these over build->host->target.  Please.
190 xm_file=
191 md_file=
192
193 # Obsolete configurations.
194 case ${target} in
195    c4x-*                \
196  | tic4x-*              \
197  )
198     if test "x$enable_obsolete" != xyes; then
199       echo "*** Configuration ${target} is obsolete." >&2
200       echo "*** Specify --enable-obsolete to build it anyway." >&2
201       echo "*** Support will be REMOVED in the next major release of GCC," >&2
202       echo "*** unless a maintainer comes forward." >&2
203       exit 1
204     fi;;
205 esac
206
207 # Unsupported targets list.  Do not put an entry in this list unless
208 # it would otherwise be caught by a more permissive pattern.  The list
209 # should be in alphabetical order.
210 case ${target} in
211    alpha*-*-linux*libc1*                \
212  | i[34567]86-sequent-sysv              \
213  | i[34567]86-sequent-sysv[123]*        \
214  | i[34567]86-go32-*                    \
215  | i[34567]86-*-go32*                   \
216  | m68k-*-linux*aout*                   \
217  | m68k-*-linux*libc1*                  \
218  | mips64orion*-*-rtems*                \
219  | powerpc-*-linux*libc1*               \
220  | sparc-*-linux*aout*                  \
221  | sparc-*-linux*libc1*                 \
222  | sparc-hal-solaris2*                  \
223  | thumb-*-*                            \
224  | *-*-linux*coff*                      \
225  | *-*-linux*oldld*                     \
226  | *-*-rtemsaout*                       \
227  | *-*-rtemscoff*                       \
228  | vax-*-vms*                           \
229  )
230         echo "*** Configuration ${target} not supported" 1>&2
231         exit 1
232         ;;
233 esac
234
235 # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
236 # updated in each machine entry.  Also set default extra_headers for some
237 # machines.
238 tm_p_file=
239 cpu_type=`echo ${target} | sed 's/-.*$//'`
240 cpu_is_64bit=
241 case ${target} in
242 m32c*-*-*)
243         cpu_type=m32c
244         tmake_file=m32c/t-m32c
245         ;;
246 alpha*-*-*)
247         cpu_type=alpha
248         need_64bit_hwint=yes
249         ;;
250 am33_2.0-*-linux*)
251         cpu_type=mn10300
252         ;;
253 strongarm*-*-*)
254         cpu_type=arm
255         ;;
256 arm*-*-*)
257         cpu_type=arm
258         extra_headers="mmintrin.h"
259         ;;
260 bfin*-*)
261         cpu_type=bfin
262         ;;
263 ep9312*-*-*)
264         cpu_type=arm
265         ;;
266 frv*)   cpu_type=frv
267         ;;
268 xscale-*-*)
269         cpu_type=arm
270         extra_headers="mmintrin.h"
271         ;;
272 i[34567]86-*-*)
273         cpu_type=i386
274         extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
275                        pmmintrin.h tmmintrin.h"
276         ;;
277 x86_64-*-*)
278         cpu_type=i386
279         extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
280                        pmmintrin.h tmmintrin.h"
281         need_64bit_hwint=yes
282         ;;
283 ia64-*-*)
284         extra_headers=ia64intrin.h
285         need_64bit_hwint=yes
286         ;;
287 hppa*-*-* | parisc*-*-*)
288         cpu_type=pa
289         ;;
290 m32r*-*-*)
291         cpu_type=m32r
292         ;;
293 m680[012]0-*-*)
294         cpu_type=m68k
295         extra_headers=math-68881.h
296         ;;
297 m68k-*-*)
298         extra_headers=math-68881.h
299         ;;
300 mips*-*-*)
301         cpu_type=mips
302         need_64bit_hwint=yes
303         ;;
304 powerpc*-*-*)
305         cpu_type=rs6000
306         extra_headers="ppc-asm.h altivec.h spe.h"
307         need_64bit_hwint=yes
308         case x$with_cpu in
309             xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[3456]|xpower6x|xrs64a)
310                 cpu_is_64bit=yes
311                 ;;
312         esac
313         ;;
314 rs6000*-*-*)
315         need_64bit_hwint=yes
316         ;;
317 score*-*-*)
318         cpu_type=score
319         ;;
320 sparc64*-*-*)
321         cpu_type=sparc
322         need_64bit_hwint=yes
323         ;;
324 sparc*-*-*)
325         cpu_type=sparc
326         ;;
327 spu*-*-*)
328         cpu_type=spu
329         need_64bit_hwint=yes
330         ;;
331 s390*-*-*)
332         cpu_type=s390
333         need_64bit_hwint=yes
334         ;;
335 # Note the 'l'; we need to be able to match e.g. "shle" or "shl".
336 sh[123456789lbe]*-*-*)
337         cpu_type=sh
338         need_64bit_hwint=yes
339         ;;
340 tic4x-*-*)
341         cpu_type=c4x
342         ;;
343 esac
344
345 tm_file=${cpu_type}/${cpu_type}.h
346 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
347 then
348         tm_p_file=${cpu_type}/${cpu_type}-protos.h
349 fi
350 extra_modes=
351 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
352 then
353         extra_modes=${cpu_type}/${cpu_type}-modes.def
354 fi
355 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt
356 then
357         extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt"
358 fi
359
360 case ${target} in
361 x86_64-*-*)
362         tm_file="i386/biarch64.h ${tm_file}"
363         ;;
364 esac
365
366 # On a.out targets, we need to use collect2.
367 case ${target} in
368 *-*-*aout*)
369         use_collect2=yes
370         ;;
371 esac
372
373 # Common parts for widely ported systems.
374 case ${target} in
375 *-*-darwin*)
376   tm_file="${tm_file} darwin.h"
377   case ${target} in
378   *-*-darwin9*)
379     tm_file="${tm_file} darwin9.h"
380     ;;
381   esac
382   tm_file="${tm_file} ${cpu_type}/darwin.h"
383   tm_p_file="${tm_p_file} darwin-protos.h"
384   tmake_file="t-darwin ${cpu_type}/t-darwin t-slibgcc-darwin"
385   target_gtfiles="\$(srcdir)/config/darwin.c"
386   extra_options="${extra_options} darwin.opt"
387   c_target_objs="darwin-c.o"
388   cxx_target_objs="darwin-c.o"
389   extra_objs="darwin.o"
390   default_use_cxa_atexit=yes
391   case ${enable_threads} in
392     "" | yes | posix) thread_file='posix' ;;
393   esac
394   ;;
395 *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
396   # This is the place-holder for the generic a.out configuration
397   # of FreeBSD.  No actual configuration resides here since
398   # there was only ever a bare-bones ix86 configuration for
399   # a.out and it exists solely in the machine-specific section.
400   # This place-holder must exist to avoid dropping into
401   # the generic ELF configuration of FreeBSD (i.e. it must be
402   # ordered before that section).
403   ;;
404 *-*-freebsd*)
405   # This is the generic ELF configuration of FreeBSD.  Later
406   # machine-specific sections may refine and add to this
407   # configuration.
408   #
409   # Due to tm_file entry ordering issues that vary between cpu
410   # architectures, we only define fbsd_tm_file to allow the
411   # machine-specific section to dictate the final order of all
412   # entries of tm_file with the minor exception that components
413   # of the tm_file set here will always be of the form:
414   #
415   # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
416   #
417   # The machine-specific section should not tamper with this
418   # ordering but may order all other entries of tm_file as it
419   # pleases around the provided core setting.
420   gas=yes
421   gnu_ld=yes
422   extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
423   case ${target} in
424     *-*-freebsd3 | *-*-freebsd[3].*)
425       tm_defines="${tm_defines} FBSD_MAJOR=3" ;;
426     *-*-freebsd4 | *-*-freebsd[4].*)
427       tm_defines="${tm_defines} FBSD_MAJOR=4" ;;
428     *-*-freebsd5 | *-*-freebsd[5].*)
429       tm_defines="${tm_defines} FBSD_MAJOR=5" ;;
430     *-*-freebsd6 | *-*-freebsd[6].*)
431       tm_defines="${tm_defines} FBSD_MAJOR=6" ;;
432     *-*-freebsd7 | *-*-freebsd[7].*)
433       tm_defines="${tm_defines} FBSD_MAJOR=7" ;;
434     *-*-freebsd8 | *-*-freebsd[8].*)
435       tm_defines="${tm_defines} FBSD_MAJOR=8" ;;
436     *-*-freebsd9 | *-*-freebsd[9].*)
437       tm_defines="${tm_defines} FBSD_MAJOR=9" ;;
438     *)
439       echo 'Please update *-*-freebsd* in gcc/config.gcc'
440       exit 1
441       ;;
442   esac
443   tmake_file="t-slibgcc-elf-ver t-freebsd"
444   case ${enable_threads} in
445     no)
446       fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
447       ;;
448     "" | yes | posix)
449       thread_file='posix'
450       tmake_file="${tmake_file} t-freebsd-thread"
451       # Before 5.0, FreeBSD can't bind shared libraries to -lc
452       # when "optionally" threaded via weak pthread_* checks.
453       case ${target} in
454         *-*-freebsd[34] | *-*-freebsd[34].*)
455           tmake_file="${tmake_file} t-slibgcc-nolc-override"
456           ;;
457       esac
458       ;;
459     *)
460       echo 'Unknown thread configuration for FreeBSD'
461       exit 1
462       ;;
463   esac
464   fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h"
465   ;;
466 *-*-linux*libc1* | *-*-linux*aout*)
467   # Avoid the generic linux case.
468   ;;
469 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu)
470   # Must come before *-*-gnu* (because of *-*-linux-gnu* systems).
471   extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
472   extra_options="${extra_options} linux.opt"
473   gas=yes
474   gnu_ld=yes
475   case ${enable_threads} in
476     "" | yes | posix) thread_file='posix' ;;
477   esac
478   tmake_file="t-slibgcc-elf-ver t-linux"
479   case ${target} in
480     *-*-*uclibc*)
481       tm_defines="${tm_defines} UCLIBC_DEFAULT=1"
482       ;;
483     *)
484       tm_defines="${tm_defines} UCLIBC_DEFAULT=0"
485       ;;
486   esac
487   # Assume that glibc or uClibc are being used and so __cxa_atexit is provided.
488   default_use_cxa_atexit=yes
489   ;;
490 *-*-gnu*)
491   # On the Hurd, the setup is just about the same on
492   # each different CPU.  The specific machines that we
493   # support are matched above and just set $cpu_type.
494   tm_file="${cpu_type}/gnu.h"
495   extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
496   # GNU tools are the only tools.
497   gas=yes
498   gnu_ld=yes
499   # These details are the same as for Linux.
500   # But here we need a little extra magic.
501   tmake_file="t-slibgcc-elf-ver t-linux t-gnu"
502   case ${target} in
503     alpha*)
504       tm_file="${cpu_type}/${cpu_type}.h alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h ${tm_file}"
505       ;;
506     i[34567]86-*-*)
507       tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h gnu.h ${tm_file}"
508       ;;
509   esac
510   # Assume that glibc is being used and so __cxa_atexit is provided.
511   default_use_cxa_atexit=yes
512   ;;
513 *-*-netbsd*)
514   tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd t-libgcc-pic"
515   gas=yes
516   gnu_ld=yes
517
518   # NetBSD 2.0 and later get POSIX threads enabled by default.
519   # Allow them to be explicitly enabled on any other version.
520   case ${enable_threads} in
521     "")
522       case ${target} in
523         *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
524           thread_file='posix'
525           tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
526           ;;
527       esac
528       ;;
529     yes | posix)
530       thread_file='posix'
531       tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
532       ;;
533   esac
534
535   # NetBSD 1.7 and later are set up to use GCC's crtstuff for
536   # ELF configurations.  We will clear extra_parts in the
537   # a.out configurations.
538   case ${target} in
539     *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
540       extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
541       ;;
542   esac
543
544   # NetBSD 2.0 and later provide __cxa_atexit(), which we use by
545   # default (unless overridden by --disable-__cxa_atexit).
546   case ${target} in
547     *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
548       default_use_cxa_atexit=yes
549       ;;
550   esac
551   ;;
552 *-*-openbsd*)
553   tmake_file="t-libc-ok t-openbsd t-libgcc-pic"
554   case ${enable_threads} in
555     yes)
556       thread_file='posix'
557       tmake_file="${tmake_file} t-openbsd-thread"
558       ;;
559   esac
560   case ${target} in
561     *-*-openbsd2.*|*-*-openbsd3.[012])
562       tm_defines="${tm_defines} HAS_LIBC_R=1" ;;
563   esac
564   ;;
565 *-*-rtems*)
566   case ${enable_threads} in
567     yes) thread_file='rtems' ;;
568   esac
569   ;;
570 *-*-vxworks*)
571   tmake_file=t-vxworks
572   tm_file="${tm_file} elfos.h svr4.h"
573   xm_defines=POSIX
574   extra_options="${extra_options} vxworks.opt"
575   case ${enable_threads} in
576     no) ;;
577     "" | yes | vxworks) thread_file='vxworks' ;;
578     *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
579   esac
580   ;;
581 *-*-elf)
582   # Assume that newlib is being used and so __cxa_atexit is provided.
583   default_use_cxa_atexit=yes
584   ;;
585 esac
586
587 case ${target} in
588 # Support site-specific machine types.
589 *local*)
590         rest=`echo ${target} | sed -e "s/$cpu_type-//"`
591         tm_file=${cpu_type}/$rest.h
592         if test -f $srcdir/config/${cpu_type}/xm-$rest.h
593         then xm_file=${cpu_type}/xm-$rest.h
594         fi
595         if test -f $srcdir/config/${cpu_type}/t-$rest
596         then tmake_file=${cpu_type}/t-$rest
597         fi
598         ;;
599 alpha*-*-unicosmk*)
600         use_collect2=yes
601         tm_file="${tm_file} alpha/unicosmk.h"
602
603         # Don't include t-ieee for now because we don't support that yet
604         # tmake_file="alpha/t-ieee"
605         tmake_file="alpha/t-unicosmk"
606         use_fixproto=yes
607         ;;
608 alpha*-*-linux*)
609         tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
610         target_cpu_default="MASK_GAS"
611         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee alpha/t-linux"
612         ;;
613 alpha*-*-gnu*)
614         target_cpu_default="MASK_GAS"
615         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
616         ;;
617 alpha*-*-freebsd*)
618         tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
619         target_cpu_default="MASK_GAS"
620         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
621         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
622         ;;
623 alpha*-*-netbsd*)
624         tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
625         target_cpu_default="MASK_GAS"
626         tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
627         ;;
628 alpha*-*-openbsd*)
629         tm_defines="${tm_defines} OBSD_NO_DYNAMIC_LIBRARIES OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
630         tm_file="alpha/alpha.h openbsd.h alpha/openbsd.h"
631         # default x-alpha is only appropriate for dec-osf.
632         target_cpu_default="MASK_GAS"
633         tmake_file="alpha/t-alpha alpha/t-ieee"
634         ;;
635 alpha*-dec-osf[45]*)
636         if test x$stabs = xyes
637         then
638                 tm_file="${tm_file} dbx.h"
639         fi
640         if test x$gas != xyes
641         then
642                 extra_passes="mips-tfile mips-tdump"
643         fi
644         use_collect2=yes
645         tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf4"
646         tm_file="${tm_file} alpha/osf.h"
647         extra_headers=va_list.h
648         case ${target} in
649           *-*-osf4*)
650             # Define TARGET_SUPPORT_ARCH except on 4.0a.
651             case ${target} in
652                 *-*-osf4.0a) ;;
653                 *) tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
654             esac
655             ;;
656           *-*-osf5*)
657             tm_file="${tm_file} alpha/osf5.h"
658             tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
659             ;;
660         esac
661         case ${enable_threads} in
662           "" | yes | posix)
663             thread_file='posix'
664             tmake_file="${tmake_file} alpha/t-osf-pthread"
665             ;;
666         esac
667         ;;
668 alpha64-dec-*vms*)
669         tm_file="${tm_file} alpha/vms.h alpha/vms64.h"
670         xm_file="alpha/xm-vms.h"
671         tmake_file="alpha/t-alpha alpha/t-vms alpha/t-vms64 alpha/t-ieee"
672         prefix=/gnu
673         local_prefix=/gnu
674         ;;
675 alpha*-dec-*vms*)
676         tm_file="${tm_file} alpha/vms.h"
677         xm_file=alpha/xm-vms.h
678         tmake_file="alpha/t-alpha alpha/t-vms alpha/t-ieee"
679         prefix=/gnu
680         local_prefix=/gnu
681         ;;
682 arc-*-elf*)
683         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
684         extra_parts="crtinit.o crtfini.o"
685         use_fixproto=yes
686         ;;
687 arm-*-coff* | armel-*-coff*)
688         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h"
689         tmake_file="arm/t-arm arm/t-arm-coff"
690         ;;
691 arm-semi-aof | armel-semi-aof)
692         tm_file="arm/semiaof.h arm/aof.h arm/arm.h"
693         tmake_file="arm/t-arm arm/t-semi"
694         ;;
695 arm-wrs-vxworks)
696         tm_file="dbxelf.h elfos.h svr4.h vxworks.h arm/elf.h arm/aout.h arm/arm.h arm/vxworks.h"
697         tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
698         ;;
699 arm*-*-freebsd*|strongarm*-*-freebsd*)
700         tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
701         tmake_file="${tmake_file} arm/t-arm arm/t-strongarm-elf"
702         ;;
703 arm*-*-netbsdelf*)
704         tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
705         tmake_file="${tmake_file} arm/t-arm arm/t-netbsd"
706         ;;
707 arm*-*-netbsd*)
708         tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h"
709         tmake_file="t-netbsd arm/t-arm arm/t-netbsd"
710         extra_parts=""
711         use_collect2=yes
712         ;;
713 arm*-*-linux*)                  # ARM GNU/Linux with ELF
714         tm_file="dbxelf.h elfos.h linux.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
715         tmake_file="${tmake_file} t-linux arm/t-arm"
716         case ${target} in
717         arm*-*-linux-*eabi)
718             tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h"
719             tmake_file="$tmake_file arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi"
720             # The BPABI long long divmod functions return a 128-bit value in
721             # registers r0-r3.  Correctly modeling that requires the use of
722             # TImode.
723             need_64bit_hwint=yes
724             # The EABI requires the use of __cxa_atexit.
725             default_use_cxa_atexit=yes
726             ;;
727         *)
728             tmake_file="$tmake_file arm/t-linux"
729             ;;
730         esac
731         tm_file="$tm_file arm/aout.h arm/arm.h"
732         ;;
733 arm*-*-uclinux*)                # ARM ucLinux
734         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/linux-gas.h arm/linux-elf.h arm/uclinux-elf.h"
735         tmake_file="arm/t-arm arm/t-arm-elf"
736         ;;
737 arm*-*-ecos-elf)
738         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
739         tmake_file="arm/t-arm arm/t-arm-elf"
740         ;;
741 arm*-*-eabi* | arm*-*-symbianelf* )
742         # The BPABI long long divmod functions return a 128-bit value in
743         # registers r0-r3.  Correctly modeling that requires the use of
744         # TImode.
745         need_64bit_hwint=yes
746         default_use_cxa_atexit=yes
747         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
748         tmake_file="arm/t-arm arm/t-arm-elf"
749         case ${target} in
750         arm*-*-eabi*)
751           tmake_file="${tmake_file} arm/t-bpabi"
752           ;;
753         arm*-*-symbianelf*)
754           tm_file="${tm_file} arm/symbian.h"
755           # We do not include t-bpabi for Symbian OS because the system
756           # provides its own implementation of the BPABI functions.
757           tmake_file="${tmake_file} arm/t-symbian"
758           ;;
759         esac
760         tm_file="${tm_file} arm/aout.h arm/arm.h"
761         ;;
762 arm*-*-rtems*)
763         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h"
764         tmake_file="arm/t-arm arm/t-arm-elf t-rtems arm/t-rtems"
765         ;;
766 arm*-*-elf | ep9312-*-elf)
767         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
768         tmake_file="arm/t-arm arm/t-arm-elf"
769         ;;
770 arm*-wince-pe*)
771         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h"
772         tmake_file="arm/t-arm arm/t-wince-pe"
773         extra_options="${extra_options} arm/pe.opt"
774         extra_objs="pe.o"
775         ;;
776 arm-*-pe*)
777         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h"
778         tmake_file="arm/t-arm arm/t-pe"
779         extra_options="${extra_options} arm/pe.opt"
780         extra_objs="pe.o"
781         ;;
782 arm*-*-kaos*)
783         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-arm.h"
784         tmake_file="arm/t-arm arm/t-arm-elf"
785         ;;
786 avr-*-rtems*)
787         tm_file="avr/avr.h dbxelf.h avr/rtems.h rtems.h"
788         tmake_file="avr/t-avr t-rtems avr/t-rtems"
789         ;;
790 avr-*-*)
791         tm_file="avr/avr.h dbxelf.h"
792         use_fixproto=yes
793         ;;
794 bfin*-elf*)
795         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
796         tmake_file=bfin/t-bfin-elf
797         use_collect2=no
798         ;;
799 bfin*-uclinux*)
800         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/uclinux.h"
801         tmake_file=bfin/t-bfin-elf
802         use_collect2=no
803         ;;
804 bfin*-rtems*)
805         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h"
806         tmake_file="bfin/t-bfin t-rtems bfin/t-rtems"
807         ;;
808 bfin*-*)
809         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
810         tmake_file=bfin/t-bfin
811         use_collect2=no
812         ;;
813 c4x-*-rtems* | tic4x-*-rtems*)
814         tmake_file="c4x/t-c4x t-rtems c4x/t-rtems"
815         tm_file="c4x/c4x.h c4x/rtems.h rtems.h"
816         c_target_objs="c4x-c.o"
817         cxx_target_objs="c4x-c.o"
818         ;;
819 c4x-* | tic4x-*)
820         tmake_file=c4x/t-c4x
821         c_target_objs="c4x-c.o"
822         cxx_target_objs="c4x-c.o"
823         ;;
824 cris-*-aout)
825         tm_file="dbxelf.h ${tm_file} cris/aout.h"
826         gas=yes
827         tmake_file="cris/t-cris cris/t-aout"
828         extra_options="${extra_options} cris/aout.opt"
829         ;;
830 cris-*-elf | cris-*-none)
831         tm_file="dbxelf.h elfos.h ${tm_file}"
832         tmake_file="cris/t-cris cris/t-elfmulti"
833         gas=yes
834         extra_options="${extra_options} cris/elf.opt"
835         ;;
836 cris-*-linux*)
837         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h"
838         # We need to avoid using t-linux, so override default tmake_file
839         tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
840         extra_options="${extra_options} cris/linux.opt"
841         ;;
842 crx-*-elf)
843         tm_file="elfos.h ${tm_file}"
844         extra_parts="crtbegin.o crtend.o"
845         use_collect2=no
846         ;;
847 fr30-*-elf)
848         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
849         tmake_file=fr30/t-fr30
850         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
851         use_fixproto=yes
852         ;;
853 frv-*-elf)
854         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} frv/frv-abi.h"
855         tmake_file=frv/t-frv
856         use_fixproto=yes
857         ;;
858 frv-*-*linux*)
859         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} \
860                  linux.h frv/linux.h frv/frv-abi.h"
861         tmake_file="${tmake_file} frv/t-frv frv/t-linux"
862         ;;
863 h8300-*-rtemscoff*)
864         tmake_file="h8300/t-h8300 t-rtems h8300/t-rtems"
865         tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h h8300/rtems.h rtems.h"
866         ;;
867 h8300-*-rtems*)
868         tmake_file="h8300/t-h8300 h8300/t-elf t-rtems h8300/t-rtems"
869         tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h"
870         ;;
871 h8300-*-elf*)
872         tmake_file="h8300/t-h8300 h8300/t-elf"
873         tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h"
874         use_fixproto=yes
875         ;;
876 h8300-*-*)
877         tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h"
878         use_fixproto=yes
879         ;;
880 hppa*64*-*-linux* | parisc*64*-*-linux*)
881         target_cpu_default="MASK_PA_11|MASK_PA_20"
882         tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \
883                  pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h pa/pa64-linux.h"
884         tmake_file="${tmake_file} pa/t-linux64"
885         gas=yes gnu_ld=yes
886         need_64bit_hwint=yes
887         ;;
888 hppa*-*-linux* | parisc*-*-linux*)
889         target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
890         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \
891                  pa/pa32-regs.h pa/pa32-linux.h"
892         tmake_file="${tmake_file} pa/t-linux"
893         # Set the libgcc version number
894         if test x$sjlj = x1; then
895             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
896         else
897             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
898         fi
899         ;;
900 # port not yet contributed.
901 #hppa*-*-openbsd*)
902 #       target_cpu_default="MASK_PA_11"
903 #       ;;
904 hppa1.1-*-pro*)
905         target_cpu_default="MASK_PORTABLE_RUNTIME|MASK_NO_SPACE_REGS|MASK_SOFT_FLOAT"
906         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h \
907                  pa/pa-pro-end.h libgloss.h"
908         tmake_file="pa/t-pro"
909         ;;
910 hppa1.1-*-osf*)
911         target_cpu_default="MASK_PA_11"
912         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-osf.h"
913         tmake_file="pa/t-pa"
914         use_collect2=yes
915         ;;
916 hppa1.1-*-bsd*)
917         target_cpu_default="MASK_PA_11"
918         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h"
919         tmake_file="pa/t-pa"
920         use_collect2=yes
921         ;;
922 hppa[12]*-*-hpux10*)
923         case ${target} in
924         hppa1.1-*-* | hppa2*-*-*)
925                 target_cpu_default="MASK_PA_11"
926                 ;;
927         esac
928         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
929                  pa/pa-hpux.h pa/pa-hpux10.h"
930         extra_options="${extra_options} pa/pa-hpux.opt"
931         case ${target} in
932         *-*-hpux10.[1-9]*)
933                 tm_file="${tm_file} pa/pa-hpux1010.h"
934                 extra_options="${extra_options} pa/pa-hpux1010.opt"
935                 ;;
936         esac
937         tmake_file="pa/t-pa-hpux10 pa/t-pa-hpux pa/t-hpux-shlib"
938         case ${enable_threads} in
939           "")
940             if test x$have_pthread_h = xyes ; then
941               tmake_file="${tmake_file} pa/t-dce-thr"
942             fi
943             ;;
944           yes | dce)
945             tmake_file="${tmake_file} pa/t-dce-thr"
946             ;;
947         esac
948         # Set the libgcc version number
949         if test x$sjlj = x1; then
950             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
951         else
952             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
953         fi
954         use_collect2=yes
955         use_fixproto=yes
956         gas=yes
957         ;;
958 hppa*64*-*-hpux11*)
959         target_cpu_default="MASK_PA_11|MASK_PA_20"
960         if test x$gnu_ld = xyes
961         then
962                 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
963         fi
964         tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
965                  pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
966                  pa/pa-hpux11.h"
967         case ${target} in
968         *-*-hpux11.[1-9]*)
969                 tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
970                 extra_options="${extra_options} pa/pa-hpux1111.opt"
971                 ;;
972         *)
973                 tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
974                 ;;
975         esac
976         extra_options="${extra_options} pa/pa-hpux.opt \
977                        pa/pa-hpux1010.opt pa/pa64-hpux.opt"
978         need_64bit_hwint=yes
979         tmake_file="pa/t-pa64 pa/t-pa-hpux pa/t-hpux-shlib"
980         # Set the libgcc version number
981         if test x$sjlj = x1; then
982             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
983         else
984             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
985         fi
986         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o \
987                      libgcc_stub.a"
988         case x${enable_threads} in
989         x | xyes | xposix )
990                 thread_file=posix
991                 ;;
992         esac
993         gas=yes
994         ;;
995 hppa[12]*-*-hpux11*)
996         case ${target} in
997         hppa1.1-*-* | hppa2*-*-*)
998                 target_cpu_default="MASK_PA_11"
999                 ;;
1000         esac
1001         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
1002                  pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h"
1003         extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt"
1004         case ${target} in
1005         *-*-hpux11.[1-9]*)
1006                 tm_file="${tm_file} pa/pa-hpux1111.h"
1007                 extra_options="${extra_options} pa/pa-hpux1111.opt"
1008                 ;;
1009         esac
1010         tmake_file="pa/t-pa-hpux11 pa/t-pa-hpux pa/t-hpux-shlib"
1011         # Set the libgcc version number
1012         if test x$sjlj = x1; then
1013             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1014         else
1015             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1016         fi
1017         case x${enable_threads} in
1018         x | xyes | xposix )
1019                 thread_file=posix
1020                 ;;
1021         esac
1022         use_collect2=yes
1023         gas=yes
1024         ;;
1025 i[34567]86-*-darwin*)
1026         need_64bit_hwint=yes
1027
1028         # This is so that '.../configure && make' doesn't fail due to
1029         # config.guess deciding that the configuration is i386-*-darwin* and
1030         # then this file using that to set --with-cpu=i386 which has no -m64
1031         # support.
1032         with_arch=${with_arch:-nocona}
1033         with_cpu=${with_cpu:-generic}
1034         ;;
1035 x86_64-*-darwin*)
1036         with_arch=${with_arch:-nocona}
1037         with_cpu=${with_cpu:-generic}
1038         tmake_file="t-darwin ${cpu_type}/t-darwin64 t-slibgcc-darwin"
1039         tm_file="${tm_file} ${cpu_type}/darwin64.h"
1040         ;;
1041 i[34567]86-*-elf*)
1042         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h"
1043         tmake_file="i386/t-i386elf t-svr4"
1044         use_fixproto=yes
1045         ;;
1046 i[34567]86-sequent-ptx4* | i[34567]86-sequent-sysv4*)
1047         if test x$gas = xyes
1048         then
1049                 tm_file="${tm_file} usegas.h"
1050         fi
1051         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ptx4.h i386/ptx4-i.h"
1052         tmake_file=t-svr4
1053         extra_parts="crtbegin.o crtend.o"
1054         use_fixproto=yes
1055         ;;
1056 i[34567]86-*-aout*)
1057         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/i386-aout.h"
1058         use_fixproto=yes
1059         ;;
1060 i[34567]86-*-beoself* | i[34567]86-*-beos*)
1061         tmake_file='i386/t-beos i386/t-crtpic'
1062         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/beos-elf.h"
1063         extra_parts='crtbegin.o crtend.o'
1064         ;;
1065 i[34567]86-*-freebsd*)
1066         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
1067         ;;
1068 x86_64-*-freebsd*)
1069         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
1070         ;;
1071 i[34567]86-*-netbsdelf*)
1072         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
1073         ;;
1074 i[34567]86-*-netbsd*)
1075         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h"
1076         tmake_file=t-netbsd
1077         extra_parts=""
1078         use_collect2=yes
1079         ;;
1080 x86_64-*-netbsd*)
1081         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
1082         ;;
1083 i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123])
1084         tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h"
1085         # needed to unconfuse gdb
1086         tmake_file="t-libc-ok t-openbsd i386/t-openbsd"
1087         # we need collect2 until our bug is fixed...
1088         use_collect2=yes
1089         ;;
1090 i[34567]86-*-openbsd*)
1091         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
1092         tm_file="${tm_file} openbsd.h i386/openbsdelf.h"
1093         gas=yes
1094         gnu_ld=yes
1095         ;;
1096 i[34567]86-*-coff*)
1097         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/i386-coff.h"
1098         use_fixproto=yes
1099         ;;
1100 i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu)
1101                         # Intel 80386's running GNU/*
1102                         # with ELF format using glibc 2
1103         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h"
1104         case ${target} in
1105         i[34567]86-*-linux*)
1106                 if test x$enable_targets = xall; then
1107                         tm_file="${tm_file} i386/x86-64.h i386/linux64.h"
1108                         tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1109                         tmake_file="${tmake_file} i386/t-linux64"
1110                         need_64bit_hwint=yes
1111                         # FIXME: -m64 for i[34567]86-*-* should be allowed just
1112                         # like -m32 for x86_64-*-*.
1113                         case X"${with_cpu}" in
1114                         Xgeneric|Xcore2|Xnocona|Xx86-64|Xk8|Xopteron|Xathlon64|Xathlon-fx)
1115                                 ;;
1116                         X)
1117                                 with_cpu=generic
1118                                 ;;
1119                         *)
1120                                 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1121                                 echo "generic core2 nocona x86-64 k8 opteron athlon64 athlon-fx" 1>&2
1122                                 exit 1
1123                                 ;;
1124                         esac
1125                 else
1126                         tm_file="${tm_file} i386/linux.h"
1127                 fi
1128                 ;;
1129         i[34567]86-*-knetbsd*-gnu) tm_file="${tm_file} i386/linux.h knetbsd-gnu.h i386/knetbsd-gnu.h" ;;
1130         i[34567]86-*-kfreebsd*-gnu) tm_file="${tm_file} i386/linux.h kfreebsd-gnu.h i386/kfreebsd-gnu.h" ;;
1131         esac
1132         tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtfm t-dfprules"
1133         ;;
1134 x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
1135         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h \
1136                  i386/x86-64.h i386/linux64.h"
1137         case ${target} in
1138         x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h" ;;
1139         x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;;
1140         esac
1141         tmake_file="${tmake_file} i386/t-linux64 i386/t-crtfm t-dfprules"
1142         ;;
1143 i[34567]86-*-gnu*)
1144         ;;
1145 i[34567]86-pc-msdosdjgpp*)
1146         xm_file=i386/xm-djgpp.h
1147         tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h"
1148         tmake_file=i386/t-djgpp
1149         extra_options="${extra_options} i386/djgpp.opt"
1150         gnu_ld=yes
1151         gas=yes
1152         ;;
1153 i[34567]86-*-lynxos*)
1154         xm_defines=POSIX
1155         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
1156         tmake_file="i386/t-crtstuff t-lynx"
1157         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1158         extra_options="${extra_options} lynx.opt"
1159         thread_file=lynx
1160         gnu_ld=yes
1161         gas=yes
1162         ;;
1163 i[3456x]86-*-netware*)
1164         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h tm-dwarf2.h i386/netware.h"
1165         tmake_file=i386/t-netware
1166         extra_objs=netware.o
1167         case /${with_ld} in
1168         */nwld)
1169                 extra_objs="$extra_objs nwld.o"
1170                 tm_file="${tm_file} i386/nwld.h"
1171                 tmake_file="${tmake_file} i386/t-nwld"
1172                 extra_parts="crt0.o libgcc.def libc.def libcpre.def posixpre.def"
1173                 ;;
1174         esac
1175         case x${enable_threads} in
1176         x | xyes | xposix) thread_file='posix';;
1177         xnks) thread_file='nks';;
1178         xno) ;;
1179         *) echo 'Unknown thread configuration for NetWare' >&2; exit 1;;
1180         esac
1181         ;;
1182 i[34567]86-*-nto-qnx*)
1183         tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h svr4.h i386/unix.h i386/nto.h"
1184         tmake_file=i386/t-nto
1185         gnu_ld=yes
1186         gas=yes
1187         ;;
1188 i[34567]86-*-rtems*)
1189         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h"
1190         extra_parts="crtbegin.o crtend.o crti.o crtn.o"
1191         tmake_file="i386/t-rtems-i386 i386/t-crtstuff t-rtems"
1192         ;;
1193 i[34567]86-*-sco3.2v5*) # 80386 running SCO Open Server 5
1194         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/sco5.h"
1195         if test x$gas = xyes
1196         then
1197                 tm_file="usegas.h ${tm_file}"
1198         fi
1199         tmake_file=i386/t-sco5
1200         extra_parts="crtbegin.o crtend.o"
1201         extra_options="${extra_options} i386/sco5.opt"
1202         use_fixproto=yes
1203         ;;
1204 i[34567]86-*-solaris2*)
1205         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h"
1206         case ${target} in
1207         *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
1208                 tm_file="${tm_file} sol2-6.h"
1209                 ;;
1210         *-*-solaris2.1[0-9]*)
1211                 tm_file="${tm_file} sol2-10.h"
1212                 ;;
1213         esac
1214         tm_file="${tm_file} i386/sol2.h"
1215         tmake_file="t-sol2 i386/t-sol2 t-svr4"
1216         c_target_objs="sol2-c.o"
1217         cxx_target_objs="sol2-c.o"
1218         extra_objs="sol2.o"
1219         tm_p_file="${tm_p_file} sol2-protos.h"
1220         if test x$gnu_ld = xyes; then
1221                 tmake_file="$tmake_file t-slibgcc-elf-ver"
1222                 tm_defines="${tm_defines} TARGET_GNU_LD=1"
1223         else
1224                 tmake_file="$tmake_file t-slibgcc-sld"
1225         fi
1226         if test x$gas = xyes; then
1227                 tm_file="usegas.h ${tm_file}"
1228         fi
1229         case ${target} in
1230         *-*-solaris2.[789] | *-*-solaris2.1[0-9]*)
1231                 tm_file="$tm_file tm-dwarf2.h"
1232                 ;;
1233         esac
1234         case ${target} in
1235         *-*-solaris2.1[0-9]*)
1236                 tm_file="${tm_file} i386/x86-64.h i386/sol2-10.h"
1237                 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1238                 tmake_file="$tmake_file i386/t-sol2-10"
1239                 need_64bit_hwint=yes
1240                 # FIXME: -m64 for i[34567]86-*-* should be allowed just
1241                 # like -m32 for x86_64-*-*.
1242                 case X"${with_cpu}" in
1243                 Xgeneric|Xcore2|Xnocona|Xx86-64|Xk8|Xopteron|Xathlon64|Xathlon-fx)
1244                         ;;
1245                 X)
1246                         with_cpu=generic
1247                         ;;
1248                 *)
1249                         echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1250                         echo "generic core2 nocona x86-64 k8 opteron athlon64 athlon-fx" 1>&2
1251                         exit 1
1252                         ;;
1253                 esac
1254                 # Solaris 2.10 provides crt1.o, crti.o, crtn.o, and gcrt1.o as
1255                 # part of the base system.
1256                 extra_parts="gmon.o crtbegin.o crtend.o"
1257                 ;;
1258         *)
1259                 extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
1260                 ;;
1261         esac
1262         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
1263           "":yes:* | yes:yes:* )
1264                 case ${target} in
1265                   *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
1266                         thread_file=posix95
1267                         ;;
1268                   *)
1269                         thread_file=posix
1270                         ;;
1271                 esac
1272                 ;;
1273           "":*:yes | yes:*:yes )
1274                 thread_file=solaris
1275                 ;;
1276         esac
1277         ;;
1278 i[34567]86-*-sysv5*)           # Intel x86 on System V Release 5
1279        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv5.h"
1280        if test x$stabs = xyes
1281        then
1282                tm_file="${tm_file} dbx.h"
1283        fi
1284        tmake_file="i386/t-crtpic t-svr4"
1285        extra_parts="crtbegin.o crtend.o"
1286        if test x$enable_threads = xyes; then
1287                thread_file='posix'
1288        fi
1289         use_fixproto=yes
1290        ;;
1291 i[34567]86-*-sysv4*)            # Intel 80386's running system V.4
1292         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv4-cpp.h"
1293         if test x$stabs = xyes
1294         then
1295                 tm_file="${tm_file} dbx.h"
1296         fi
1297         tmake_file="i386/t-crtpic t-svr4"
1298         extra_parts="crtbegin.o crtend.o"
1299         use_fixproto=yes
1300         ;;
1301 i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae)
1302         tm_file="${tm_file} i386/sysv4.h i386/unix.h i386/att.h vx-common.h"
1303         case ${target} in
1304           *-vxworksae*)
1305             tm_file="${tm_file} vxworksae.h i386/vxworksae.h"
1306             tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae"
1307             ;;
1308           *)
1309             tm_file="${tm_file} vxworks.h i386/vxworks.h"
1310             tmake_file="${tmake_file} i386/t-vxworks"
1311             ;;
1312         esac
1313         ;;
1314 i[34567]86-*-pe | i[34567]86-*-cygwin*)
1315         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h"
1316         xm_file=i386/xm-cygwin.h
1317         tmake_file="i386/t-cygwin i386/t-cygming"
1318         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1319         extra_options="${extra_options} i386/cygming.opt"
1320         extra_objs="winnt.o winnt-stubs.o"
1321         c_target_objs=cygwin2.o
1322         cxx_target_objs="cygwin2.o winnt-cxx.o"
1323         extra_gcc_objs=cygwin1.o
1324         if test x$enable_threads = xyes; then
1325                 thread_file='posix'
1326         fi
1327         ;;
1328 i[34567]86-*-mingw32*)
1329         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h"
1330         xm_file=i386/xm-mingw32.h
1331         tmake_file="i386/t-cygming i386/t-mingw32"
1332         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1333         extra_options="${extra_options} i386/cygming.opt"
1334         extra_objs="winnt.o winnt-stubs.o"
1335         cxx_target_objs=winnt-cxx.o
1336         default_use_cxa_atexit=yes
1337         case ${enable_threads} in
1338           "" | yes | win32)
1339           thread_file='win32'
1340           tmake_file="${tmake_file} i386/t-gthr-win32"
1341           ;;
1342         esac
1343         case ${target} in
1344                 *mingw32crt*)
1345                         tm_file="${tm_file} i386/crtdll.h"
1346                         ;;
1347                 *mingw32msv* | *mingw32*)
1348                         ;;
1349         esac
1350         ;;
1351 i[34567]86-*-uwin*)
1352         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygwin.h i386/uwin.h"
1353         tmake_file="i386/t-cygwin i386/t-uwin"
1354         extra_objs=winnt.o
1355         extra_options="${extra_options} i386/cygming.opt"
1356         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1357         if test x$enable_threads = xyes; then
1358                 thread_file='win32'
1359         fi
1360         use_fixproto=yes
1361         ;;
1362 i[34567]86-*-interix3*)
1363         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
1364         tmake_file="i386/t-interix"
1365         extra_objs=winnt.o
1366         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1367         if test x$enable_threads = xyes ; then
1368                 thread_file='posix'
1369         fi
1370         if test x$stabs = xyes ; then
1371                 tm_file="${tm_file} dbxcoff.h"
1372         fi
1373         ;;
1374 i[34567]86-*-kaos*)
1375         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h kaos.h i386/kaos-i386.h"
1376         tmake_file="i386/t-i386elf t-svr4"
1377         ;;
1378 ia64*-*-elf*)
1379         tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/elf.h"
1380         tmake_file="ia64/t-ia64"
1381         target_cpu_default="0"
1382         if test x$gas = xyes
1383         then
1384                 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1385         fi
1386         if test x$gnu_ld = xyes
1387         then
1388                 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1389         fi
1390         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1391         use_fixproto=yes
1392         ;;
1393 ia64*-*-freebsd*)
1394         tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
1395         target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1396         tmake_file="${tmake_file} ia64/t-ia64"
1397         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1398         ;;
1399 ia64*-*-linux*)
1400         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h ia64/sysv4.h ia64/linux.h"
1401         tmake_file="${tmake_file} ia64/t-ia64 t-libunwind ia64/t-glibc"
1402         if test x$with_system_libunwind != xyes ; then
1403                 tmake_file="${tmake_file} t-libunwind-elf ia64/t-glibc-libunwind"
1404         fi
1405         target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1406         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1407         ;;
1408 ia64*-*-hpux*)
1409         tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h"
1410         tmake_file="ia64/t-ia64 ia64/t-hpux"
1411         target_cpu_default="MASK_GNU_AS"
1412         case x$enable_threads in
1413         xyes | xposix )
1414                 thread_file=posix
1415                 ;;
1416         esac
1417         use_collect2=no
1418         c_target_objs="ia64-c.o"
1419         cxx_target_objs="ia64-c.o"
1420         extra_options="${extra_options} ia64/ilp32.opt"
1421         # If we decide to run fixproto we should define FIXPROTO_DEFINES
1422         # in ia64/t-hpux, and also fix the definition of putenv in
1423         # sys-protos.h (const char not char).
1424         ;;
1425 iq2000*-*-elf*)
1426         tm_file="svr4.h elfos.h iq2000/iq2000.h"
1427         tmake_file=iq2000/t-iq2000
1428         out_file=iq2000/iq2000.c
1429         md_file=iq2000/iq2000.md
1430         use_fixproto=yes
1431         ;;
1432 m32r-*-elf*)
1433         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1434         extra_parts="crtinit.o crtfini.o"
1435         use_fixproto=yes
1436         ;;
1437 m32rle-*-elf*)
1438         tm_file="dbxelf.h elfos.h svr4.h m32r/little.h ${tm_file}"
1439         extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o"
1440         use_fixproto=yes
1441         ;;
1442 m32r-*-linux*)
1443         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} m32r/linux.h"
1444         # We override the tmake_file for linux -- why?
1445         tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1446         gnu_ld=yes
1447         use_fixproto=yes
1448         if test x$enable_threads = xyes; then
1449                 thread_file='posix'
1450         fi
1451         ;;
1452 m32rle-*-linux*)
1453         tm_file="dbxelf.h elfos.h svr4.h linux.h m32r/little.h ${tm_file} m32r/linux.h"
1454         # We override the tmake_file for linux -- why?
1455         tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1456         gnu_ld=yes
1457         use_fixproto=yes
1458         if test x$enable_threads = xyes; then
1459                 thread_file='posix'
1460         fi
1461         ;;
1462 # m68hc11 and m68hc12 share the same machine description.
1463 m68hc11-*-*|m6811-*-*)
1464         tm_file="dbxelf.h elfos.h m68hc11/m68hc11.h"
1465         tm_p_file="m68hc11/m68hc11-protos.h"
1466         md_file="m68hc11/m68hc11.md"
1467         out_file="m68hc11/m68hc11.c"
1468         tmake_file="m68hc11/t-m68hc11-gas"
1469         use_fixproto=yes
1470         ;;
1471 m68hc12-*-*|m6812-*-*)
1472         tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h m68hc11/m68hc11.h"
1473         tm_p_file="m68hc11/m68hc11-protos.h"
1474         md_file="m68hc11/m68hc11.md"
1475         out_file="m68hc11/m68hc11.c"
1476         tmake_file="m68hc11/t-m68hc11-gas"
1477         extra_options="${extra_options} m68hc11/m68hc11.opt"
1478         use_fixproto=yes
1479         ;;
1480 m68k-*-aout*)
1481         default_m68k_cpu=68020
1482         tmake_file=m68k/t-m68kbare
1483         tm_file="${tm_file} m68k/m68k-none.h m68k/m68kemb.h m68k/m68k-aout.h libgloss.h"
1484         ;;
1485 m68k-*-coff*)
1486         default_m68k_cpu=68020
1487         tmake_file=m68k/t-m68kbare
1488         tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
1489         tm_file="${tm_file} m68k/m68k-none.h m68k/m68kemb.h dbxcoff.h m68k/coff.h dbx.h"
1490         use_fixproto=yes
1491         ;;
1492 m68020-*-elf* | m68k-*-elf*)
1493         default_m68k_cpu=68020
1494         tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h"
1495         tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
1496         tmake_file=m68k/t-m68kelf
1497         extra_parts="crtbegin.o crtend.o"
1498         ;;
1499 m68010-*-netbsdelf* | m68k*-*-netbsdelf*)
1500         default_m68k_cpu=68020
1501         tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
1502         tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
1503         ;;
1504 m68k*-*-openbsd*)
1505         default_m68k_cpu=68020
1506         # needed to unconfuse gdb
1507         tm_defines="${tm_defines} OBSD_OLD_GAS"
1508         tm_file="${tm_file} openbsd.h m68k/openbsd.h"
1509         tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
1510         # we need collect2 until our bug is fixed...
1511         use_collect2=yes
1512         ;;
1513 m68k-*-uclinuxoldabi*)          # Motorola m68k/ColdFire running uClinux
1514                                 # with uClibc, using the original
1515                                 # m68k-elf-based ABI
1516         default_m68k_cpu=68020
1517         tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux-oldabi.h"
1518         tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
1519         tmake_file=m68k/t-uclinux
1520         use_fixproto=no
1521         ;;
1522 m68k-*-uclinux*)                # Motorola m68k/ColdFire running uClinux
1523                                 # with uClibc, using the new GNU/Linux-style
1524                                 # ABI.
1525         default_m68k_cpu=68020
1526         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h flat.h m68k/linux.h m68k/uclinux.h"
1527         tm_defines="${tm_defines} MOTOROLA=1 USE_GAS UCLIBC_DEFAULT=1"
1528         extra_options="${extra_options} linux.opt"
1529         tmake_file=m68k/t-uclinux
1530         use_fixproto=no
1531         ;;
1532 m68k-*-linux*)          # Motorola m68k's running GNU/Linux
1533                                 # with ELF format using glibc 2
1534                                 # aka the GNU/Linux C library 6.
1535         default_m68k_cpu=68020
1536         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h m68k/linux.h"
1537         extra_options="${extra_options} m68k/ieee.opt"
1538         tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
1539         # if not configured with --enable-sjlj-exceptions, bump the
1540         # libgcc version number
1541         if test x$sjlj != x1; then
1542             tmake_file="$tmake_file m68k/t-slibgcc-elf-ver"
1543         fi
1544         ;;
1545 m68k-*-rtems*)
1546         default_m68k_cpu=68020
1547         tmake_file="m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems"
1548         tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h"
1549         tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
1550         extra_parts="crtbegin.o crtend.o"
1551         ;;
1552 mcore-*-elf)
1553         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} mcore/mcore-elf.h"
1554         tmake_file=mcore/t-mcore
1555         use_fixproto=yes
1556         ;;
1557 mcore-*-pe*)
1558         tm_file="svr3.h dbxcoff.h ${tm_file} mcore/mcore-pe.h"
1559         tmake_file=mcore/t-mcore-pe
1560         use_fixproto=yes
1561         ;;
1562 mips-sgi-irix[56]*)
1563         tm_file="elfos.h ${tm_file} mips/iris.h"
1564         tmake_file="mips/t-iris mips/t-slibgcc-irix"
1565         target_cpu_default="MASK_ABICALLS"
1566         case ${target} in
1567         *-*-irix5*)
1568                 tm_file="${tm_file} mips/iris5.h"
1569                 ;;
1570
1571         *-*-irix6*)
1572                 tm_file="${tm_file} mips/iris6.h"
1573                 tmake_file="${tmake_file} mips/t-iris6"
1574                 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
1575                 ;;
1576         esac
1577         if test "x$stabs" = xyes
1578         then
1579                 tm_file="${tm_file} dbx.h mips/dbxmdebug.h"
1580         fi
1581         if test "x$gnu_ld" = xyes
1582         then
1583                 tm_defines="${tm_defines} IRIX_USING_GNU_LD"
1584         fi
1585 #       if test x$enable_threads = xyes; then
1586 #               thread_file='irix'
1587 #       fi
1588         use_fixproto=yes
1589         ;;
1590 mips*-*-netbsd*)                        # NetBSD/mips, either endian.
1591         target_cpu_default="MASK_ABICALLS"
1592         tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
1593         ;;
1594 mips64*-*-linux*)
1595         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h mips/linux64.h"
1596         tmake_file="${tmake_file} mips/t-linux64"
1597         tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_N32"
1598         gnu_ld=yes
1599         gas=yes
1600         ;;
1601 mips*-*-linux*)                         # Linux MIPS, either endian.
1602         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h"
1603         case ${target} in
1604         mipsisa32*-*)
1605                 target_cpu_default="MASK_SOFT_FLOAT"
1606                 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1607                 ;;
1608         esac
1609         ;;
1610 mips*-*-openbsd*)
1611         tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
1612         target_cpu_default="MASK_ABICALLS"
1613         tm_file="mips/mips.h openbsd.h mips/openbsd.h mips/sdb.h"
1614         case ${target} in
1615         mips*el-*-openbsd*)
1616             tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";;
1617         *)  tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";;
1618         esac
1619         ;;
1620 mipsisa32-*-elf* | mipsisa32el-*-elf*)
1621         tm_file="elfos.h ${tm_file} mips/elf.h"
1622         tmake_file=mips/t-isa3264
1623         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_EABI"
1624         use_fixproto=yes
1625         ;;
1626 mipsisa32r2-*-elf* | mipsisa32r2el-*-elf*)
1627         tm_file="elfos.h ${tm_file} mips/elf.h"
1628         tmake_file=mips/t-isa3264
1629         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_EABI"
1630         use_fixproto=yes
1631         ;;
1632 mipsisa64-*-elf* | mipsisa64el-*-elf*)
1633         tm_file="elfos.h ${tm_file} mips/elf.h"
1634         tmake_file=mips/t-isa3264
1635         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1636         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_EABI"
1637         use_fixproto=yes
1638         ;;
1639 mipsisa64sr71k-*-elf*)
1640         tm_file="elfos.h ${tm_file} mips/elf.h"
1641         tmake_file=mips/t-sr71k
1642         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1643         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
1644         use_fixproto=yes
1645         ;;
1646 mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
1647         tm_file="elfos.h ${tm_file} mips/elf.h"
1648         tmake_file="mips/t-elf mips/t-sb1"
1649         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1650         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
1651         use_fixproto=yes
1652         ;;
1653 mips-*-elf* | mipsel-*-elf*)
1654         tm_file="elfos.h ${tm_file} mips/elf.h"
1655         tmake_file=mips/t-elf
1656         use_fixproto=yes
1657         ;;
1658 mips64-*-elf* | mips64el-*-elf*)
1659         tm_file="elfos.h ${tm_file} mips/elf.h"
1660         tmake_file=mips/t-elf
1661         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1662         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1663         use_fixproto=yes
1664         ;;
1665 mips64vr-*-elf* | mips64vrel-*-elf*)
1666         tm_file="mips/vr.h elfos.h ${tm_file} mips/elf.h"
1667         tmake_file=mips/t-vr
1668         use_fixproto=yes
1669         ;;
1670 mips64orion-*-elf* | mips64orionel-*-elf*)
1671         tm_file="elfos.h ${tm_file} mips/elforion.h mips/elf.h"
1672         tmake_file=mips/t-elf
1673         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1674         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1675         use_fixproto=yes
1676         ;;
1677 mips*-*-rtems*)
1678         tm_file="elfos.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
1679         tmake_file="mips/t-elf t-rtems mips/t-rtems"
1680         ;;
1681 mips-wrs-vxworks)
1682         # We want vxworks.h after mips/elf.h, which unfortunately means we
1683         # have to redo the tm_file list from scratch.
1684         tm_file="elfos.h mips/mips.h svr4.h mips/elf.h vxworks.h mips/vxworks.h"
1685         tmake_file="${tmake_file} mips/t-vxworks"
1686         ;;
1687 mips-wrs-windiss)       # Instruction-level simulator for VxWorks.
1688         xm_defines=POSIX
1689         tm_file="elfos.h mips/mips.h svr4.h mips/elf.h windiss.h mips/windiss.h"
1690         tmake_file="${tmake_file} mips/t-elf"
1691         thread_file=
1692         ;;
1693 mipstx39-*-elf* | mipstx39el-*-elf*)
1694         tm_file="elfos.h ${tm_file} mips/r3900.h mips/elf.h"
1695         tmake_file=mips/t-r3900
1696         use_fixproto=yes
1697         ;;
1698 mmix-knuth-mmixware)
1699         need_64bit_hwint=yes
1700         ;;
1701 mn10300-*-*)
1702         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1703         if test x$stabs = xyes
1704         then
1705                 tm_file="${tm_file} dbx.h"
1706         fi
1707         use_collect2=no
1708         use_fixproto=yes
1709         ;;
1710 mt-*-elf)
1711         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1712         tmake_file="${tmake_file} mt/t-mt"
1713         ;;
1714 ns32k-*-netbsdelf*)
1715         echo "GCC does not yet support the ${target} target"; exit 1
1716         ;;
1717 ns32k-*-netbsd*)
1718         tm_file="${tm_file} netbsd.h netbsd-aout.h ns32k/netbsd.h"
1719         # On NetBSD, the headers are already okay, except for math.h.
1720         tmake_file="t-netbsd ns32k/t-ns32k"
1721         extra_parts=""
1722         use_collect2=yes
1723         ;;
1724 pdp11-*-bsd)
1725         tm_file="${tm_file} pdp11/2bsd.h"
1726         use_fixproto=yes
1727         ;;
1728 pdp11-*-*)
1729         use_fixproto=yes
1730         ;;
1731 # port not yet contributed
1732 #powerpc-*-openbsd*)
1733 #       tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit "
1734 #       extra_headers=
1735 #       ;;
1736 powerpc64-*-linux*)
1737         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1738         test x$with_cpu != x || cpu_is_64bit=yes
1739         test x$cpu_is_64bit != xyes || tm_file="${tm_file} rs6000/default64.h"
1740         tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
1741         if test x${enable_secureplt} = xyes; then
1742                 tm_file="rs6000/secureplt.h ${tm_file}"
1743         fi
1744         extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
1745         tmake_file="t-dfprules rs6000/t-fprules ${tmake_file} rs6000/t-ppccomm rs6000/t-linux64 rs6000/t-fprules-softfp soft-fp/t-softfp"
1746         ;;
1747 powerpc64-*-gnu*)
1748         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux64.h rs6000/gnu.h"
1749         extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
1750         tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-gnu rs6000/t-linux64 rs6000/t-fprules-softfp soft-fp/t-softfp"
1751         ;;
1752 powerpc-*-beos*)
1753         tm_file="${tm_file} rs6000/aix.h rs6000/beos.h rs6000/xcoff.h"
1754         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-beos"
1755         extra_headers=
1756         use_fixproto=yes
1757         ;;
1758 powerpc-*-darwin*)
1759         extra_options="${extra_options} rs6000/darwin.opt"
1760         extra_parts="crt2.o"
1761         case ${target} in
1762           *-darwin1[0-9]* | *-darwin[8-9]*)
1763             tmake_file="${tmake_file} rs6000/t-darwin8"
1764             tm_file="${tm_file} rs6000/darwin8.h"
1765             ;;
1766           *-darwin7*)
1767             tm_file="${tm_file} rs6000/darwin7.h"
1768             ;;
1769           *-darwin[0-6]*)
1770             ;;
1771         esac
1772         extra_headers=altivec.h
1773         ;;
1774 powerpc64-*-darwin*)
1775         tm_file="${tm_file} ${cpu_type}/darwin8.h ${cpu_type}/darwin64.h"
1776         extra_options="${extra_options} ${cpu_type}/darwin.opt"
1777         # We're omitting t-darwin8 to avoid building any multilibs
1778         extra_headers=altivec.h
1779         ;;
1780 powerpc*-*-freebsd*)
1781         tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
1782         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1783         extra_options="${extra_options} rs6000/sysv4.opt"
1784         ;;
1785 powerpc-*-netbsd*)
1786         tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
1787         tmake_file="${tmake_file} rs6000/t-netbsd"
1788         extra_options="${extra_options} rs6000/sysv4.opt"
1789         ;;
1790 powerpc-*-chorusos*)
1791         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h chorus.h"
1792         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos rs6000/t-ppccomm"
1793         extra_options="${extra_options} rs6000/sysv4.opt"
1794         case ${enable_threads} in
1795           yes | posix)
1796             thread_file='posix'
1797             ;;
1798         esac
1799         use_fixproto=yes
1800         ;;
1801 powerpc-*-eabispe*)
1802         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabispe.h"
1803         extra_options="${extra_options} rs6000/sysv4.opt"
1804         tmake_file="rs6000/t-spe rs6000/t-ppccomm"
1805         ;;
1806 powerpc-*-eabisimaltivec*)
1807         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h rs6000/eabialtivec.h"
1808         extra_options="${extra_options} rs6000/sysv4.opt"
1809         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
1810         ;;
1811 powerpc-*-eabisim*)
1812         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
1813         extra_options="${extra_options} rs6000/sysv4.opt"
1814         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1815         ;;
1816 powerpc-*-elf*)
1817         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1818         extra_options="${extra_options} rs6000/sysv4.opt"
1819         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1820         use_fixproto=yes
1821         ;;
1822 powerpc-*-eabialtivec*)
1823         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabialtivec.h"
1824         extra_options="${extra_options} rs6000/sysv4.opt"
1825         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
1826         ;;
1827 powerpc-*-eabi*)
1828         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
1829         extra_options="${extra_options} rs6000/sysv4.opt"
1830         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1831         ;;
1832 powerpc-*-rtems*)
1833         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/rtems.h rtems.h"
1834         extra_options="${extra_options} rs6000/sysv4.opt"
1835         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-rtems t-rtems rs6000/t-ppccomm"
1836         ;;
1837 powerpc-*-linux*altivec*)
1838         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h"
1839         extra_options="${extra_options} rs6000/sysv4.opt"
1840         tmake_file="rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1841         ;;
1842 powerpc-*-linux*spe*)
1843         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxspe.h rs6000/e500.h"
1844         extra_options="${extra_options} rs6000/sysv4.opt"
1845         tmake_file="rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1846         ;;
1847 powerpc-*-linux*)
1848         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1849         extra_options="${extra_options} rs6000/sysv4.opt"
1850         tmake_file="t-dfprules rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1851         case ${enable_targets}:${cpu_is_64bit} in
1852             *powerpc64* | all:* | *:yes)
1853                 if test x$cpu_is_64bit = xyes; then
1854                     tm_file="${tm_file} rs6000/default64.h"
1855                 fi
1856                 tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
1857                 tmake_file="$tmake_file rs6000/t-linux64"
1858                 extra_options="${extra_options} rs6000/linux64.opt"
1859                 ;;
1860             *)
1861                 tm_file="${tm_file} rs6000/linux.h"
1862                 ;;
1863         esac
1864         if test x${enable_secureplt} = xyes; then
1865                 tm_file="rs6000/secureplt.h ${tm_file}"
1866         fi
1867         ;;
1868 powerpc-*-gnu-gnualtivec*)
1869         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h"
1870         extra_options="${extra_options} rs6000/sysv4.opt"
1871         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1872         if test x$enable_threads = xyes; then
1873                 thread_file='posix'
1874         fi
1875         ;;
1876 powerpc-*-gnu*)
1877         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h"
1878         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1879         extra_options="${extra_options} rs6000/sysv4.opt"
1880         if test x$enable_threads = xyes; then
1881                 thread_file='posix'
1882         fi
1883         ;;
1884 powerpc-wrs-vxworks|powerpc-wrs-vxworksae)
1885         # We want vxworks.h after rs6000/sysv4.h, which unfortunately
1886         # means we have to redo the tm_file list from scratch.
1887         tm_file="rs6000/rs6000.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1888         tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppccomm rs6000/t-vxworks"
1889         extra_options="${extra_options} rs6000/sysv4.opt"
1890         extra_headers=ppc-asm.h
1891         case ${target} in
1892           *-vxworksae*)
1893             tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/e500.h rs6000/vxworksae.h"
1894             tmake_file="${tmake_file} rs6000/t-vxworksae"
1895             ;;
1896           *-vxworks*)
1897             tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h rs6000/e500.h"
1898             ;;
1899         esac
1900         ;;
1901 powerpc-wrs-windiss*)  # Instruction-level simulator for VxWorks.
1902         tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/windiss.h"
1903         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1904         extra_options="${extra_options} rs6000/sysv4.opt"
1905         thread_file=""
1906         use_fixproto=yes
1907         ;;
1908 powerpc-*-lynxos*)
1909         xm_defines=POSIX
1910         tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
1911         tmake_file="t-lynx rs6000/t-lynx"
1912         extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
1913         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1914         extra_options="${extra_options} lynx.opt"
1915         thread_file=lynx
1916         gnu_ld=yes
1917         gas=yes
1918         ;;
1919 powerpcle-*-sysv*)
1920         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
1921         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos rs6000/t-ppccomm"
1922         extra_options="${extra_options} rs6000/sysv4.opt"
1923         use_fixproto=yes
1924         ;;
1925 powerpcle-*-elf*)
1926         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
1927         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1928         extra_options="${extra_options} rs6000/sysv4.opt"
1929         use_fixproto=yes
1930         ;;
1931 powerpcle-*-eabisim*)
1932         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
1933         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1934         extra_options="${extra_options} rs6000/sysv4.opt"
1935         ;;
1936 powerpcle-*-eabi*)
1937         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h"
1938         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1939         extra_options="${extra_options} rs6000/sysv4.opt"
1940         ;;
1941 powerpc-*-kaos*)
1942         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h kaos.h rs6000/kaos-ppc.h"
1943         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1944         extra_options="${extra_options} rs6000/sysv4.opt"
1945         ;;
1946 powerpcle-*-kaos*)
1947         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h kaos.h rs6000/kaos-ppc.h"
1948         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1949         extra_options="${extra_options} rs6000/sysv4.opt"
1950         ;;
1951 rs6000-ibm-aix4.[12]* | powerpc-ibm-aix4.[12]*)
1952         tm_file="${tm_file} rs6000/aix.h rs6000/aix41.h rs6000/xcoff.h"
1953         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-newas"
1954         extra_options="${extra_options} rs6000/aix41.opt"
1955         use_collect2=yes
1956         extra_headers=
1957         use_fixproto=yes
1958         ;;
1959 rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
1960         tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h"
1961         tmake_file=rs6000/t-aix43
1962         extra_options="${extra_options} rs6000/aix64.opt"
1963         use_collect2=yes
1964         thread_file='aix'
1965         extra_headers=
1966         ;;
1967 rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
1968         tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h"
1969         extra_options="${extra_options} rs6000/aix64.opt"
1970         tmake_file=rs6000/t-aix43
1971         use_collect2=yes
1972         thread_file='aix'
1973         extra_headers=
1974         ;;
1975 rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*)
1976         tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h"
1977         tmake_file=rs6000/t-aix52
1978         extra_options="${extra_options} rs6000/aix64.opt"
1979         use_collect2=yes
1980         thread_file='aix'
1981         extra_headers=
1982         ;;
1983 s390-*-linux*)
1984         tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
1985         tmake_file="${tmake_file} t-dfprules s390/t-crtstuff s390/t-linux"
1986         ;;
1987 s390x-*-linux*)
1988         tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
1989         tm_p_file=s390/s390-protos.h
1990         md_file=s390/s390.md
1991         extra_modes=s390/s390-modes.def
1992         out_file=s390/s390.c
1993         tmake_file="${tmake_file} t-dfprules s390/t-crtstuff s390/t-linux s390/t-linux64"
1994         ;;
1995 s390x-ibm-tpf*)
1996         tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h s390/tpf.h"
1997         tm_p_file=s390/s390-protos.h
1998         md_file=s390/s390.md
1999         extra_modes=s390/s390-modes.def
2000         out_file=s390/s390.c
2001         extra_parts="crtbeginS.o crtendS.o"
2002         tmake_file="s390/t-crtstuff s390/t-tpf"
2003         thread_file='tpf'
2004         extra_options="${extra_options} s390/tpf.opt"
2005         ;;
2006 score-*-elf)
2007         tm_file="dbxelf.h elfos.h score/elf.h score/score.h"
2008         tmake_file=score/t-score-elf
2009         extra_objs="score-mdaux.o"
2010         ;;
2011 sh-*-elf* | sh[12346l]*-*-elf* | sh*-*-kaos* | \
2012 sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \
2013   sh-*-linux* | sh[346lbe]*-*-linux* | \
2014   sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
2015    sh64-*-netbsd* | sh64l*-*-netbsd*)
2016         tmake_file="${tmake_file} sh/t-sh sh/t-elf"
2017         if test x${with_endian} = x; then
2018                 case ${target} in
2019                 sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;;
2020                 shbe-*-* | sheb-*-*)               with_endian=big,little ;;
2021                 sh[1234]l* | sh[34]*-*-linux*)     with_endian=little ;;
2022                 shl* | sh64l* | sh*-*-linux* | \
2023                   sh5l* | sh-superh-elf)           with_endian=little,big ;;
2024                 sh[1234]*-*-*)                     with_endian=big ;;
2025                 *)                                 with_endian=big,little ;;
2026                 esac
2027         fi
2028         case ${with_endian} in
2029         big|little)     tmake_file="${tmake_file} sh/t-1e" ;;
2030         big,little|little,big) ;;
2031         *)      echo "with_endian=${with_endian} not supported."; exit 1 ;;
2032         esac
2033         case ${with_endian} in
2034         little*)        tm_file="sh/little.h ${tm_file}" ;;
2035         esac
2036         tm_file="${tm_file} dbxelf.h elfos.h"
2037         case ${target} in
2038         sh*-*-netbsd*)  ;;
2039         *)              tm_file="${tm_file} svr4.h" ;;
2040         esac
2041         tm_file="${tm_file} sh/elf.h"
2042         case ${target} in
2043         sh*-*-linux*)   tmake_file="${tmake_file} sh/t-linux"
2044                         tm_file="${tm_file} linux.h sh/linux.h" ;;
2045         sh*-*-kaos*)    tm_file="${tm_file} sh/embed-elf.h kaos.h sh/kaos-sh.h"
2046                         ;;
2047         sh*-*-netbsd*)  tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h" ;;
2048         sh*-superh-elf) if test x$with_libgloss != xno; then
2049                                 with_libgloss=yes
2050                                 tm_file="${tm_file} sh/newlib.h"
2051                         fi
2052                         tm_file="${tm_file} sh/embed-elf.h sh/superh.h"
2053                         tmake_file="${tmake_file} sh/t-superh"
2054                         extra_options="${extra_options} sh/superh.opt" ;;
2055         *)              if test x$with_newlib = xyes \
2056                            && test x$with_libgloss = xyes; then
2057                                 tm_file="${tm_file} sh/newlib.h"
2058                         fi
2059                         tm_file="${tm_file} sh/embed-elf.h" ;;
2060         esac
2061         case ${target} in
2062         sh5*-*-netbsd*)
2063                 # SHmedia, 32-bit ABI
2064                 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd"
2065                 ;;
2066         sh64*-netbsd*)
2067                 # SHmedia, 64-bit ABI
2068                 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd sh/t-netbsd-sh5-64"
2069                 ;;
2070         *-*-netbsd)
2071                 tmake_file="${tmake_file} sh/t-netbsd"
2072                 ;;
2073         sh64*-*-linux*)
2074                 tmake_file="${tmake_file} sh/t-sh64 sh/t-linux64"
2075                 tm_file="${tm_file} sh/sh64.h"
2076                 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2077                 ;;
2078         sh64*)
2079                 tmake_file="${tmake_file} sh/t-sh64"
2080                 tm_file="${tm_file} sh/sh64.h"
2081                 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2082                 ;;
2083         *-*-symbianelf*)
2084                 tmake_file="sh/t-symbian"
2085                 tm_file="sh/symbian-pre.h sh/little.h ${tm_file} sh/symbian-post.h"
2086                 extra_objs="symbian.o"
2087                 extra_parts="crt1.o crti.o crtn.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
2088                 ;;
2089         esac
2090         # sed el/eb endian suffixes away to avoid confusion with sh[23]e
2091         case `echo ${target} | sed 's/e[lb]-/-/'` in
2092         sh64*-*-netbsd*)        sh_cpu_target=sh5-64media ;;
2093         sh64* | sh5*-*-netbsd*) sh_cpu_target=sh5-32media ;;
2094         sh4a_single_only*)      sh_cpu_target=sh4a-single-only ;;
2095         sh4a_single*)           sh_cpu_target=sh4a-single ;;
2096         sh4a_nofpu*)            sh_cpu_target=sh4a-nofpu ;;
2097         sh4al)                  sh_cpu_target=sh4al ;;
2098         sh4a*)                  sh_cpu_target=sh4a ;;
2099         sh4_single_only*)       sh_cpu_target=sh4-single-only ;;
2100         sh4_single*)            sh_cpu_target=sh4-single ;;
2101         sh4_nofpu*)             sh_cpu_target=sh4-nofpu ;;
2102         sh4* | sh-superh-*)     sh_cpu_target=sh4 ;;
2103         sh3e*)                  sh_cpu_target=sh3e ;;
2104         sh*-*-netbsd* | sh3*)   sh_cpu_target=sh3 ;;
2105         sh2a_single_only*)      sh_cpu_target=sh2a-single-only ;;
2106         sh2a_single*)           sh_cpu_target=sh2a-single ;;
2107         sh2a_nofpu*)            sh_cpu_target=sh2a-nofpu ;;
2108         sh2a*)                  sh_cpu_target=sh2a ;;
2109         sh2e*)                  sh_cpu_target=sh2e ;;
2110         sh2*)                   sh_cpu_target=sh2 ;;
2111         *)                      sh_cpu_target=sh1 ;;
2112         esac
2113         # did the user say --without-fp ?
2114         if test x$with_fp = xno; then
2115                 case ${sh_cpu_target} in
2116                 sh5-*media)     sh_cpu_target=${sh_cpu_target}-nofpu ;;
2117                 sh4al | sh1)    ;;
2118                 sh4a* )         sh_cpu_target=sh4a-nofpu ;;
2119                 sh4*)           sh_cpu_target=sh4-nofpu ;;
2120                 sh3*)           sh_cpu_target=sh3 ;;
2121                 sh2a*)          sh_cpu_target=sh2a-nofpu ;;
2122                 sh2*)           sh_cpu_target=sh2 ;;
2123                 *)      echo --without-fp not available for $target: ignored
2124                 esac
2125                 tm_defines="$tm_defines STRICT_NOFPU=1"
2126         fi
2127         sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`"
2128         case $sh_cpu_default in
2129         sh5-64media-nofpu | sh5-64media | \
2130           sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \
2131           sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
2132           sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
2133           sh4-single-only | sh4-single | sh4-nofpu | sh4 | \
2134           sh3e | sh3 | sh2e | sh2 | sh1) ;;
2135         "")     sh_cpu_default=${sh_cpu_target} ;;
2136         *)      echo "with_cpu=$with_cpu not supported"; exit 1 ;;
2137         esac
2138         sh_multilibs=${with_multilib_list}
2139         if test x${sh_multilibs} = x ; then
2140                 case ${target} in
2141                 sh64-superh-linux* | \
2142                 sh[1234]*)      sh_multilibs=${sh_cpu_target} ;;
2143                 sh64* | sh5*)   sh_multilibs=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu ;;
2144                 sh-superh-*)    sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;;
2145                 sh*-*-linux*)   sh_multilibs=m1,m3e,m4 ;;
2146                 sh*-*-netbsd*)  sh_multilibs=m3,m3e,m4 ;;
2147                 *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;;
2148                 esac
2149                 if test x$with_fp = xno; then
2150                         sh_multilibs="`echo $sh_multilibs|sed -e s/m4/sh4-nofpu/ -e s/,m4-[^,]*//g -e s/,m[23]e// -e s/m2a,m2a-single/m2a-nofpu/ -e s/m5-..m....,//g`"
2151                 fi
2152         fi
2153         target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`
2154         tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"'
2155         sh_multilibs=`echo $sh_multilibs,$sh_cpu_default | sed -e 's/[  ,/][    ,]*/ /g' -e 's/ $//' -e 's/^m/sh/' -e 's/ m/ sh/g' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-`
2156         for sh_multilib in ${sh_multilibs}; do
2157                 case ${sh_multilib} in
2158                 sh1 | sh2 | sh2e | sh3 | sh3e | \
2159                 sh4 | sh4-single | sh4-single-only | sh4-nofpu | \
2160                 sh4a | sh4a-single | sh4a-single-only | sh4a-nofpu | sh4al | \
2161                 sh2a | sh2a-single | sh2a-single-only | sh2a-nofpu | \
2162                 sh5-64media | sh5-64media-nofpu | \
2163                 sh5-32media | sh5-32media-nofpu | \
2164                 sh5-compact | sh5-compact-nofpu)
2165                         tmake_file="${tmake_file} sh/t-mlib-${sh_multilib}"
2166                         tm_defines="$tm_defines SUPPORT_`echo $sh_multilib|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
2167                         ;;
2168                 *)
2169                         echo "with_multilib_list=${sh_multilib} not supported."
2170                         exit 1
2171                         ;;
2172                 esac
2173         done
2174         if test x${enable_incomplete_targets} = xyes ; then
2175                 tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1"
2176         fi
2177         use_fixproto=yes
2178         ;;
2179 sh-*-rtemscoff*)
2180         tmake_file="sh/t-sh t-rtems sh/t-rtems"
2181         tm_file="${tm_file} dbxcoff.h sh/coff.h sh/rtems.h rtems.h"
2182         ;;
2183 sh-*-rtems*)
2184         tmake_file="sh/t-sh sh/t-elf t-rtems sh/t-rtems"
2185         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h"
2186         ;;
2187 sh-wrs-vxworks)
2188         tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks"
2189         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/embed-elf.h sh/vxworks.h"
2190         ;;
2191 sh-*-*)
2192         tm_file="${tm_file} dbxcoff.h sh/coff.h"
2193         use_fixproto=yes
2194         ;;
2195 sparc-*-netbsdelf*)
2196         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2197         extra_options="${extra_options} sparc/long-double-switch.opt"
2198         ;;
2199 sparc64-*-openbsd*)
2200         tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h"
2201         extra_options="${extra_options} sparc/little-endian.opt"
2202         gas=yes gnu_ld=yes
2203         with_cpu=ultrasparc
2204         ;;
2205 sparc-*-elf*)
2206         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h"
2207         tmake_file="sparc/t-elf sparc/t-crtfm"
2208         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2209         use_fixproto=yes
2210         ;;
2211 sparc-*-linux*)         # SPARC's running GNU/Linux, libc6
2212         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h"
2213         extra_options="${extra_options} sparc/long-double-switch.opt"
2214         tmake_file="${tmake_file} sparc/t-linux sparc/t-crtfm"
2215         ;;
2216 sparc-*-rtems*)
2217         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h"
2218         tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
2219         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2220         ;;
2221 sparc64-*-solaris2* | sparcv9-*-solaris2*)
2222         tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
2223         case ${target} in
2224         *-*-solaris2.1[0-9]*)
2225                 tm_file="${tm_file} sol2-10.h"
2226                 ;;
2227         esac
2228         tm_file="${tm_file} sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h"
2229         if test x$gnu_ld = xyes; then
2230                 tm_file="${tm_file} sparc/sol2-gld.h sparc/sol2-gld-bi.h"
2231         fi
2232         if test x$gas = xyes; then
2233                 tm_file="${tm_file} sparc/sol2-gas.h sparc/sol2-gas-bi.h"
2234         fi
2235         tm_file="${tm_file} tm-dwarf2.h"
2236         tmake_file="t-sol2 sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm"
2237         if test x$gnu_ld = xyes; then
2238                 tmake_file="$tmake_file t-slibgcc-elf-ver"
2239         else
2240                 tmake_file="$tmake_file t-slibgcc-sld"
2241         fi
2242         c_target_objs="sol2-c.o"
2243         cxx_target_objs="sol2-c.o"
2244         extra_objs="sol2.o"
2245         tm_p_file="${tm_p_file} sol2-protos.h"
2246         extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o"
2247         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2248           "":yes:* | yes:yes:* ) thread_file=posix ;;
2249           "":*:yes | yes:*:yes ) thread_file=solaris ;;
2250         esac
2251         need_64bit_hwint=yes
2252         ;;
2253 sparc-*-solaris2*)
2254         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
2255         case ${target} in
2256         *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2257                 tm_file="${tm_file} sol2-6.h"
2258                 ;;
2259         *-*-solaris2.1[0-9]*)
2260                 tm_file="${tm_file} sol2-10.h"
2261                 ;;
2262         esac
2263         tm_file="${tm_file} sparc/sol2.h"
2264         if test x$gnu_ld = xyes; then
2265                 tm_file="${tm_file} sparc/sol2-gld.h"
2266         fi
2267         if test x$gas = xyes; then
2268                 tm_file="${tm_file} sparc/sol2-gas.h"
2269         fi
2270         tmake_file="t-sol2 sparc/t-sol2 sparc/t-crtfm"
2271         if test x$gnu_ld = xyes; then
2272                 tmake_file="$tmake_file t-slibgcc-elf-ver"
2273         else
2274                 tmake_file="$tmake_file t-slibgcc-sld"
2275         fi
2276         case ${target} in
2277         *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2278                 if test x$gnu_ld = xno; then
2279                         tm_file="${tm_file} sparc/sol26-sld.h"
2280                 fi
2281                 ;;
2282         *-*-solaris2.[789] | *-*-solaris2.1[0-9]*)
2283                 tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h"
2284                 if test x$gnu_ld = xyes; then
2285                         tm_file="${tm_file} sparc/sol2-gld-bi.h"
2286                 fi
2287                 if test x$gas = xyes; then
2288                         tm_file="${tm_file} sparc/sol2-gas-bi.h"
2289                 fi
2290                 tm_file="${tm_file} tm-dwarf2.h"
2291                 tmake_file="$tmake_file sparc/t-sol2-64"
2292                 need_64bit_hwint=yes
2293                 test x$with_cpu != x || with_cpu=v9
2294                 ;;
2295         esac
2296         c_target_objs="sol2-c.o"
2297         cxx_target_objs="sol2-c.o"
2298         extra_objs="sol2.o"
2299         tm_p_file="${tm_p_file} sol2-protos.h"
2300         extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
2301         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2302           "":yes:* | yes:yes:* )
2303                 case ${target} in
2304                   *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2305                         thread_file=posix95
2306                         ;;
2307                   *)
2308                         thread_file=posix
2309                         ;;
2310                 esac
2311                 ;;
2312           "":*:yes | yes:*:yes )
2313                 thread_file=solaris
2314                 ;;
2315         esac
2316         ;;
2317 sparc-*-sysv4*)
2318         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sysv4-only.h"
2319         tmake_file=t-svr4
2320         extra_parts="crtbegin.o crtend.o"
2321         use_fixproto=yes
2322         ;;
2323 sparc64-*-elf*)
2324         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h"
2325         extra_options="${extra_options} sparc/little-endian.opt"
2326         tmake_file="${tmake_file} sparc/t-crtfm"
2327         extra_parts="crtbegin.o crtend.o"
2328         use_fixproto=yes
2329         ;;
2330 sparc64-*-freebsd*|ultrasparc-*-freebsd*)
2331         tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
2332         extra_options="${extra_options} sparc/long-double-switch.opt"
2333         tmake_file="${tmake_file} sparc/t-crtfm"
2334         case "x$with_cpu" in
2335                 xultrasparc) ;;
2336                 x) with_cpu=ultrasparc ;;
2337                 *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
2338         esac
2339         need_64bit_hwint=yes
2340         ;;
2341 sparc64-*-linux*)               # 64-bit SPARC's running GNU/Linux
2342         tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux64.h"
2343         extra_options="${extra_options} sparc/long-double-switch.opt"
2344         tmake_file="${tmake_file} sparc/t-linux sparc/t-linux64 sparc/t-crtfm"
2345         ;;
2346 sparc64-*-netbsd*)
2347         tm_file="sparc/biarch64.h ${tm_file}"
2348         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2349         extra_options="${extra_options} sparc/long-double-switch.opt"
2350         tmake_file="${tmake_file} sparc/t-netbsd64"
2351         ;;
2352 spu-*-elf*)
2353         tm_file="dbxelf.h elfos.h spu/spu-elf.h spu/spu.h"
2354         tmake_file="spu/t-spu-elf"
2355         extra_headers="spu_intrinsics.h spu_internals.h vmx2spu.h spu_mfcio.h vec_types.h"
2356         extra_modes=spu/spu-modes.def
2357         c_target_objs="${c_target_objs} spu-c.o"
2358         cxx_target_objs="${cxx_target_objs} spu-c.o"
2359         ;;
2360 strongarm-*-elf*)
2361         tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
2362         tmake_file="arm/t-arm arm/t-strongarm-elf"
2363         out_file=arm/arm.c
2364         md_file=arm/arm.md
2365         extra_modes=arm/arm-modes.def
2366         use_fixproto=yes
2367         ;;
2368 strongarm-*-pe)
2369         tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/strongarm-coff.h arm/arm.h arm/pe.h arm/strongarm-pe.h"
2370         tmake_file="arm/t-arm arm/t-strongarm-pe"
2371         out_file=arm/arm.c
2372         md_file=arm/arm.md
2373         extra_modes=arm/arm-modes.def
2374         extra_options="${extra_options} arm/pe.opt"
2375         extra_objs=pe.o
2376         use_fixproto=yes
2377         ;;
2378 strongarm-*-kaos*)
2379         tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-strongarm.h"
2380         tmake_file="arm/t-arm arm/t-strongarm-elf"
2381         out_file=arm/arm.c
2382         md_file=arm/arm.md
2383         extra_modes=arm/arm-modes.def
2384         ;;
2385 v850e1-*-*)
2386         target_cpu_default="TARGET_CPU_v850e1"
2387         tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
2388         tm_p_file=v850/v850-protos.h
2389         tmake_file=v850/t-v850e
2390         md_file=v850/v850.md
2391         out_file=v850/v850.c
2392         extra_options="${extra_options} v850/v850.opt"
2393         if test x$stabs = xyes
2394         then
2395                 tm_file="${tm_file} dbx.h"
2396         fi
2397         use_collect2=no
2398         c_target_objs="v850-c.o"
2399         cxx_target_objs="v850-c.o"
2400         use_fixproto=yes
2401         ;;
2402 v850e-*-*)
2403         target_cpu_default="TARGET_CPU_v850e"
2404         tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
2405         tm_p_file=v850/v850-protos.h
2406         tmake_file=v850/t-v850e
2407         md_file=v850/v850.md
2408         out_file=v850/v850.c
2409         extra_options="${extra_options} v850/v850.opt"
2410         if test x$stabs = xyes
2411         then
2412                 tm_file="${tm_file} dbx.h"
2413         fi
2414         use_collect2=no
2415         c_target_objs="v850-c.o"
2416         cxx_target_objs="v850-c.o"
2417         use_fixproto=yes
2418         ;;
2419 v850-*-*)
2420         target_cpu_default="TARGET_CPU_generic"
2421         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
2422         tmake_file=v850/t-v850
2423         if test x$stabs = xyes
2424         then
2425                 tm_file="${tm_file} dbx.h"
2426         fi
2427         use_collect2=no
2428         c_target_objs="v850-c.o"
2429         cxx_target_objs="v850-c.o"
2430         use_fixproto=yes
2431         ;;
2432 vax-*-bsd*)                     # VAXen running BSD
2433         tm_file="${tm_file} vax/bsd.h"
2434         tmake_file=vax/t-memfuncs
2435         use_collect2=yes
2436         use_fixproto=yes
2437         ;;
2438 vax-*-sysv*)                    # VAXen running system V
2439         tm_file="${tm_file} vax/vaxv.h"
2440         tmake_file=vax/t-memfuncs
2441         use_fixproto=yes
2442         ;;
2443 vax-*-netbsdelf*)
2444         tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
2445         ;;
2446 vax-*-netbsd*)
2447         tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h"
2448         tmake_file=t-netbsd
2449         extra_parts=""
2450         use_collect2=yes
2451         ;;
2452 vax-*-openbsd*)
2453         tm_file="vax/vax.h vax/openbsd1.h openbsd.h vax/openbsd.h"
2454         use_collect2=yes
2455         ;;
2456 vax-*-ultrix*)                  # VAXen running ultrix
2457         tm_file="${tm_file} vax/ultrix.h"
2458         tmake_file=vax/t-memfuncs
2459         use_fixproto=yes
2460         ;;
2461 xscale-*-elf)
2462         tm_file="arm/xscale-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
2463         tmake_file="arm/t-arm arm/t-xscale-elf"
2464         out_file=arm/arm.c
2465         md_file=arm/arm.md
2466         extra_modes=arm/arm-modes.def
2467         use_fixproto=yes
2468         ;;
2469 xscale-*-coff)
2470         tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/xscale-coff.h arm/arm.h"
2471         tmake_file="arm/t-arm arm/t-xscale-coff"
2472         out_file=arm/arm.c
2473         md_file=arm/arm.md
2474         extra_modes=arm/arm-modes.def
2475         use_fixproto=yes
2476         ;;
2477 xstormy16-*-elf)
2478         # For historical reasons, the target files omit the 'x'.
2479         tm_file="dbxelf.h elfos.h svr4.h stormy16/stormy16.h"
2480         tm_p_file=stormy16/stormy16-protos.h
2481         md_file=stormy16/stormy16.md
2482         out_file=stormy16/stormy16.c
2483         extra_options=stormy16/stormy16.opt
2484         tmake_file="stormy16/t-stormy16"
2485         extra_parts="crtbegin.o crtend.o"
2486         use_fixproto=yes
2487         ;;
2488 xtensa-*-elf*)
2489         tm_file="${tm_file} dbxelf.h elfos.h svr4.h xtensa/elf.h"
2490         tmake_file="xtensa/t-xtensa xtensa/t-elf"
2491         ;;
2492 xtensa-*-linux*)
2493         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h xtensa/linux.h"
2494         tmake_file="${tmake_file} xtensa/t-xtensa xtensa/t-linux"
2495         ;;
2496 am33_2.0-*-linux*)
2497         tm_file="mn10300/mn10300.h dbxelf.h elfos.h linux.h mn10300/linux.h"
2498         tmake_file="${tmake_file} mn10300/t-linux"
2499         gas=yes gnu_ld=yes
2500         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
2501         use_collect2=no
2502         ;;
2503 m32c-*-elf*)
2504         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
2505         c_target_objs="m32c-pragma.o"
2506         cxx_target_objs="m32c-pragma.o"
2507         use_fixproto=yes
2508         ;;
2509 *)
2510         echo "*** Configuration ${target} not supported" 1>&2
2511         exit 1
2512         ;;
2513 esac
2514
2515 case ${target} in
2516 i[34567]86-*-linux*aout* | i[34567]86-*-linux*libc1)
2517         tmake_file="${tmake_file} i386/t-gmm_malloc"
2518         ;;
2519 i[34567]86-*-linux* | x86_64-*-linux*)
2520         tmake_file="${tmake_file} i386/t-pmm_malloc"
2521         ;;
2522 i[34567]86-*-* | x86_64-*-*)
2523         tmake_file="${tmake_file} i386/t-gmm_malloc"
2524         ;;
2525 esac
2526
2527 # Support for --with-cpu and related options (and a few unrelated options,
2528 # too).
2529 case ${with_cpu} in
2530   yes | no)
2531     echo "--with-cpu must be passed a value" 1>&2
2532     exit 1
2533     ;;
2534 esac
2535
2536 # If there is no $with_cpu option, try to infer one from ${target}.
2537 # This block sets nothing except for with_cpu.
2538 if test x$with_cpu = x ; then
2539   case ${target} in
2540     ep9312-*-*)
2541       # A Cirrus ARM variant.
2542       with_cpu="ep9312"
2543       ;;
2544     i386-*-*)
2545       with_cpu=i386
2546       ;;
2547     i486-*-*)
2548       with_cpu=i486
2549       ;;
2550     i586-*-*)
2551       case ${target_noncanonical} in
2552         k6_2-*)
2553           with_cpu=k6-2
2554           ;;
2555         k6_3-*)
2556           with_cpu=k6-3
2557           ;;
2558         k6-*)
2559           with_cpu=k6
2560           ;;
2561         pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
2562           with_cpu=pentium-mmx
2563           ;;
2564         *)
2565           with_cpu=pentium
2566           ;;
2567       esac
2568       ;;
2569     i686-*-* | i786-*-*)
2570       case ${target_noncanonical} in
2571         k8-*|opteron-*|athlon_64-*)
2572           with_cpu=k8
2573           ;;
2574         athlon_xp-*|athlon_mp-*|athlon_4-*)
2575           with_cpu=athlon-4
2576           ;;
2577         athlon_tbird-*|athlon-*)
2578           with_cpu=athlon
2579           ;;
2580         pentium2-*)
2581           with_cpu=pentium2
2582           ;;
2583         pentium3-*|pentium3m-*)
2584           with_cpu=pentium3
2585           ;;
2586         pentium4-*|pentium4m-*)
2587           with_cpu=pentium4
2588           ;;
2589         prescott-*)
2590           with_cpu=prescott
2591           ;;
2592         nocona-*)
2593           with_cpu=nocona
2594           ;;
2595         core2-*)
2596           with_cpu=core2
2597           ;;
2598         pentium_m-*)
2599           with_cpu=pentium-m
2600           ;;
2601         pentiumpro-*)
2602           with_cpu=pentiumpro
2603           ;;
2604         *)
2605           with_cpu=generic
2606           ;;
2607       esac
2608       ;;
2609     x86_64-*-*)
2610       case ${target_noncanonical} in
2611         k8-*|opteron-*|athlon_64-*)
2612           with_cpu=k8
2613           ;;
2614         nocona-*)
2615           with_cpu=nocona
2616           ;;
2617         core2-*)
2618           with_cpu=core2
2619           ;;
2620         *)
2621           with_cpu=generic
2622           ;;
2623       esac
2624       ;;
2625     alphaev6[78]*-*-*)
2626       with_cpu=ev67
2627       ;;
2628     alphaev6*-*-*)
2629       with_cpu=ev6
2630       ;;
2631     alphapca56*-*-*)
2632       with_cpu=pca56
2633       ;;
2634     alphaev56*-*-*)
2635       with_cpu=ev56
2636       ;;
2637     alphaev5*-*-*)
2638       with_cpu=ev5
2639       ;;
2640     frv-*-*linux* | frv400-*-*linux*)
2641       with_cpu=fr400
2642       ;;
2643     frv550-*-*linux*)
2644       with_cpu=fr550
2645       ;;
2646     m680[012]0-*-*)
2647       with_cpu=`echo ${target} | sed 's/-.*$//'`
2648       ;;
2649     m68k*-*-*)
2650       with_cpu=m${default_m68k_cpu}
2651       ;;
2652     sparc*-*-*)
2653       with_cpu="`echo ${target} | sed 's/-.*$//'`"
2654       ;;
2655   esac
2656 fi
2657
2658 # Similarly for --with-float
2659 if test x$with_float = x; then
2660         case ${target} in
2661         ep9312-*-*)
2662                 with_float=hard
2663                 ;;
2664         esac
2665 fi
2666
2667 # Similarly for --with-schedule.
2668 if test x$with_schedule = x; then
2669         case ${target} in
2670         hppa1* | parisc1*)
2671                 # Override default PA8000 scheduling model.
2672                 with_schedule=7100LC
2673                 ;;
2674         esac
2675 fi
2676
2677 # Validate and mark as valid any --with options supported
2678 # by this target.  In order to use a particular --with option
2679 # you must list it in supported_defaults; validating the value
2680 # is optional.  This case statement should set nothing besides
2681 # supported_defaults.
2682
2683 supported_defaults=
2684 case "${target}" in
2685         alpha*-*-*)
2686                 supported_defaults="cpu tune"
2687                 for which in cpu tune; do
2688                         eval "val=\$with_$which"
2689                         case "$val" in
2690                         "" \
2691                         | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \
2692                         | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \
2693                         | 21264a)
2694                                 ;;
2695                         *)
2696                                 echo "Unknown CPU used in --with-$which=$val" 1>&2
2697                                 exit 1
2698                                 ;;
2699                         esac
2700                 done
2701                 ;;
2702
2703         arm*-*-*)
2704                 supported_defaults="arch cpu float tune fpu abi mode"
2705                 for which in cpu tune; do
2706                         # See if it matches any of the entries in arm-cores.def
2707                         eval "val=\$with_$which"
2708                         if [ x"$val" = x ] \
2709                             || grep "^ARM_CORE(\"$val\"," \
2710                                     ${srcdir}/config/arm/arm-cores.def \
2711                                     > /dev/null; then
2712                           # Ok
2713                           new_val=`grep "^ARM_CORE(\"$val\"," \
2714                                 ${srcdir}/config/arm/arm-cores.def | \
2715                                 sed -e 's/^[^,]*,[      ]*//' | \
2716                                 sed -e 's/,.*$//'`
2717                           eval "target_${which}_cname=$new_val"
2718                         echo "For $val real value is $new_val"
2719                           true
2720                         else
2721                           echo "Unknown CPU used in --with-$which=$val" 1>&2
2722                           exit 1
2723                         fi
2724                 done
2725
2726                 case "$with_arch" in
2727                 "" \
2728                 | armv[23456] | armv2a | armv3m | armv4t | armv5t \
2729                 | armv5te | armv6j |armv6k | armv6z | armv6zk \
2730                 | iwmmxt | ep9312)
2731                         # OK
2732                         ;;
2733                 *)
2734                         echo "Unknown arch used in --with-arch=$with_arch" 1>&2
2735                         exit 1
2736                         ;;
2737                 esac
2738
2739                 case "$with_float" in
2740                 "" \
2741                 | soft | hard | softfp)
2742                         # OK
2743                         ;;
2744                 *)
2745                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2746                         exit 1
2747                         ;;
2748                 esac
2749
2750                 case "$with_fpu" in
2751                 "" \
2752                 | fpa | fpe2 | fpe3 | maverick | vfp )
2753                         # OK
2754                         ;;
2755                 *)
2756                         echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1
2757                         exit 1
2758                         ;;
2759                 esac
2760
2761                 case "$with_abi" in
2762                 "" \
2763                 | apcs-gnu | atpcs | aapcs | iwmmxt )
2764                         #OK
2765                         ;;
2766                 *)
2767                         echo "Unknown ABI used in --with-abi=$with_abi"
2768                         exit 1
2769                         ;;
2770                 esac
2771
2772                 case "$with_mode" in
2773                 "" \
2774                 | arm | thumb )
2775                         #OK
2776                         ;;
2777                 *)
2778                         echo "Unknown mode used in --with-mode=$with_mode"
2779                         exit 1
2780                         ;;
2781                 esac
2782
2783                 if test "x$with_arch" != x && test "x$with_cpu" != x; then
2784                         echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2
2785                 fi
2786                 ;;
2787
2788         fr*-*-*linux*)
2789                 supported_defaults=cpu
2790                 case "$with_cpu" in
2791                 fr400) ;;
2792                 fr550) ;;
2793                 *)
2794                         echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
2795                         exit 1
2796                         ;;
2797                 esac
2798                 ;;
2799
2800         m680[012]0-*-* | m68k*-*-*)
2801                 supported_defaults="cpu"
2802
2803                 # We always have a $with_cpu setting here.
2804                 case "$with_cpu" in
2805                 "m68000" | "m68010" | "m68020" | "m68030" | "m68040" | "m68060")
2806                         m68k_cpu_ident=$with_cpu
2807                         ;;
2808                 "m68020-40")
2809                         m68k_cpu_ident=m68020
2810                         tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_40"
2811                         ;;
2812                 "m68020-60")
2813                         m68k_cpu_ident=m68020
2814                         tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_60"
2815                         ;;
2816                 *)
2817                         # We need the C identifier rather than the string.
2818                         m68k_cpu_ident=`awk -v arg="\"$with_cpu\"" \
2819                            'BEGIN { FS="[ \t]*[,()][ \t]*" }; \
2820                             $1 == "M68K_DEVICE" && $2 == arg { print $3 }' \
2821                                  ${srcdir}/config/m68k/m68k-devices.def`
2822                         if [ x"$m68k_cpu_ident" = x ] ; then
2823                                 echo "Unknown CPU used in --with-cpu=$with_cpu" 1>&2
2824                                 exit 1
2825                         fi
2826                         with_cpu="mcpu=$with_cpu"
2827                         ;;
2828                 esac
2829                 ;;
2830
2831         hppa*-*-* | parisc*-*-*)
2832                 supported_defaults="arch schedule"
2833
2834                 case "$with_arch" in
2835                 "" | 1.0 | 1.1 | 2.0)
2836                         # OK
2837                         ;;
2838                 *)
2839                         echo "Unknown architecture used in --with-arch=$with_arch" 1>&2
2840                         exit 1
2841                         ;;
2842                 esac
2843
2844                 case "$with_schedule" in
2845                 "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000)
2846                         # OK
2847                         ;;
2848                 *)
2849                         echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2
2850                         exit 1
2851                         ;;
2852                 esac
2853                 ;;
2854
2855         i[34567]86-*-* | x86_64-*-*)
2856                 supported_defaults="arch cpu tune"
2857                 for which in arch cpu tune; do
2858                         eval "val=\$with_$which"
2859                         case ${val} in
2860                         i386 | i486 \
2861                         | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \
2862                         | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
2863                         | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
2864                         | athlon-4 | athlon-xp | athlon-mp \
2865                         | prescott | pentium-m | pentium4m | pentium3m)
2866                                 case "${target}" in
2867                                   x86_64-*-*)
2868                                       echo "CPU given in --with-$which=$val doesn't support 64bit mode." 1>&2
2869                                       exit 1
2870                                       ;;
2871                                 esac
2872                                 # OK
2873                                 ;;
2874                         "" | k8 | opteron | athlon64 | athlon-fx | nocona | core2 | generic)
2875                                 # OK
2876                                 ;;
2877                         *)
2878                                 echo "Unknown CPU given in --with-$which=$val." 1>&2
2879                                 exit 1
2880                                 ;;
2881                         esac
2882                 done
2883                 ;;
2884
2885         mips*-*-*)
2886                 supported_defaults="abi arch float tune divide"
2887
2888                 case ${with_float} in
2889                 "" | soft | hard)
2890                         # OK
2891                         ;;
2892                 *)
2893                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2894                         exit 1
2895                         ;;
2896                 esac
2897
2898                 case ${with_abi} in
2899                 "" | 32 | o64 | n32 | 64 | eabi)
2900                         # OK
2901                         ;;
2902                 *)
2903                         echo "Unknown ABI used in --with-abi=$with_abi" 1>&2
2904                         exit 1
2905                         ;;
2906                 esac
2907
2908                 case ${with_divide} in
2909                 "" | breaks | traps)
2910                         # OK
2911                         ;;
2912                 *)
2913                         echo "Unknown division check type use in --with-divide=$with_divide" 1>&2
2914                         exit 1
2915                 esac
2916                 ;;
2917
2918         mt-*-*)
2919                 supported_defaults="arch"
2920
2921                 case "$with_arch" in
2922                 "" \
2923                 | ms1-64-001 \
2924                 | ms1-16-002 \
2925                 | ms1-16-003 \
2926                 | ms2 \
2927                 | "")
2928                         # OK
2929                         ;;
2930                 *)
2931                         echo "Unknown arch used in --with-arch=$with_arch" 1>&2
2932                         exit 1
2933                         ;;
2934                 esac
2935                 ;;
2936
2937         powerpc*-*-* | rs6000-*-*)
2938                 supported_defaults="cpu float tune"
2939
2940                 for which in cpu tune; do
2941                         eval "val=\$with_$which"
2942                         case ${val} in
2943                         default32 | default64)
2944                                 with_which="with_$which"
2945                                 eval $with_which=
2946                                 ;;
2947                         405cr)
2948                                 tm_defines="${tm_defines} CONFIG_PPC405CR"
2949                                 eval "with_$which=405"
2950                                 ;;
2951                         "" | common \
2952                         | power | power[23456] | power6x | powerpc | powerpc64 \
2953                         | rios | rios1 | rios2 | rsc | rsc1 | rs64a \
2954                         | 401 | 403 | 405 | 405fp | 440 | 440fp | 505 \
2955                         | 601 | 602 | 603 | 603e | ec603e | 604 \
2956                         | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
2957                         | 854[08] | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5)
2958                                 # OK
2959                                 ;;
2960                         *)
2961                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
2962                                 exit 1
2963                                 ;;
2964                         esac
2965                 done
2966                 ;;
2967
2968         s390*-*-*)
2969                 supported_defaults="arch mode tune"
2970
2971                 for which in arch tune; do
2972                         eval "val=\$with_$which"
2973                         case ${val} in
2974                         "" | g5 | g6 | z900 | z990 | z9-109)
2975                                 # OK
2976                                 ;;
2977                         *)
2978                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
2979                                 exit 1
2980                                 ;;
2981                         esac
2982                 done
2983
2984                 case ${with_mode} in
2985                 "" | esa | zarch)
2986                         # OK
2987                         ;;
2988                 *)
2989                         echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2
2990                         exit 1
2991                         ;;
2992                 esac
2993                 ;;
2994
2995         sh[123456ble]-*-* | sh-*-*)
2996                 supported_defaults="cpu"
2997                 case "`echo $with_cpu | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz- | sed s/sh/m/`" in
2998                 "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu )
2999                         # OK
3000                         ;;
3001                 m2a | m2a-single | m2a-single-only | m2a-nofpu)
3002                         ;;
3003                 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al)
3004                         ;;
3005                 *)
3006                         echo "Unknown CPU used in --with-cpu=$with_cpu, known values:"  1>&2
3007                         echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2
3008                         echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2
3009                         echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2
3010                         exit 1
3011                         ;;
3012                 esac
3013                 ;;
3014         sparc*-*-*)
3015                 supported_defaults="cpu float tune"
3016
3017                 for which in cpu tune; do
3018                         eval "val=\$with_$which"
3019                         case ${val} in
3020                         "" | sparc | sparcv9 | sparc64 | sparc86x \
3021                         | v7 | cypress | v8 | supersparc | sparclite | f930 \
3022                         | f934 | hypersparc | sparclite86x | sparclet | tsc701 \
3023                         | v9 | ultrasparc | ultrasparc3 | niagara)
3024                                 # OK
3025                                 ;;
3026                         *)
3027                                 echo "Unknown cpu used in --with-$which=$val" 1>&2
3028                                 exit 1
3029                                 ;;
3030                         esac
3031                 done
3032
3033                 case ${with_float} in
3034                 "" | soft | hard)
3035                         # OK
3036                         ;;
3037                 *)
3038                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
3039                         exit 1
3040                         ;;
3041                 esac
3042                 ;;
3043
3044         v850*-*-*)
3045                 supported_defaults=cpu
3046                 case ${with_cpu} in
3047                 "" | v850e | v850e1)
3048                         # OK
3049                         ;;
3050                 *)
3051                         echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
3052                         exit 1
3053                         ;;
3054                 esac
3055                 ;;
3056 esac
3057
3058 # Set some miscellaneous flags for particular targets.
3059 target_cpu_default2=
3060 case ${target} in
3061         alpha*-*-*)
3062                 if test x$gas = xyes
3063                 then
3064                         target_cpu_default2="MASK_GAS"
3065                 fi
3066                 ;;
3067
3068         arm*-*-*)
3069                 if test x$target_cpu_cname = x
3070                 then
3071                         target_cpu_default2=TARGET_CPU_generic
3072                 else
3073                         target_cpu_default2=TARGET_CPU_$target_cpu_cname
3074                 fi
3075                 ;;
3076
3077         hppa*-*-* | parisc*-*-*)
3078                 target_cpu_default2="MASK_BIG_SWITCH"
3079                 if test x$gas = xyes
3080                 then
3081                         target_cpu_default2="${target_cpu_default2}|MASK_GAS|MASK_JUMP_IN_DELAY"
3082                 fi
3083                 ;;
3084
3085         m680[012]0-*-* | m68k*-*-*)
3086                 target_cpu_default2=$m68k_cpu_ident
3087                 ;;
3088
3089         mips*-*-*)
3090                 if test x$gnu_ld = xyes
3091                 then
3092                         target_cpu_default2="MASK_SPLIT_ADDRESSES"
3093                 fi
3094                 case ${target} in
3095                         mips*el-*-*)
3096                                 tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
3097                                 ;;
3098                 esac
3099                 if test "x$enable_gofast" = xyes
3100                 then
3101                         tm_defines="US_SOFTWARE_GOFAST $tm_defines"
3102                         tmake_file="mips/t-gofast $tmake_file"
3103                 else
3104                         tmake_file="mips/t-mips $tmake_file"
3105                 fi
3106                 ;;
3107
3108         powerpc*-*-* | rs6000-*-*)
3109                 # FIXME: The PowerPC port uses the value set at compile time,
3110                 # although it's only cosmetic.
3111                 if test "x$with_cpu" != x
3112                 then
3113                         target_cpu_default2="\\\"$with_cpu\\\""
3114                 fi
3115                 out_file=rs6000/rs6000.c
3116                 c_target_objs="${c_target_objs} rs6000-c.o"
3117                 cxx_target_objs="${cxx_target_objs} rs6000-c.o"
3118                 tmake_file="rs6000/t-rs6000 ${tmake_file}"
3119
3120                 if test x$enable_e500_double = xyes
3121                 then
3122                         tm_file="$tm_file rs6000/e500-double.h"
3123                 fi
3124                 ;;
3125
3126         sh[123456ble]*-*-* | sh-*-*)
3127                 c_target_objs="${c_target_objs} sh-c.o"
3128                 cxx_target_objs="${cxx_target_objs} sh-c.o"
3129                 ;;
3130
3131         sparc*-*-*)
3132                 # Some standard aliases.
3133                 case x$with_cpu in
3134                 xsparc)
3135                         with_cpu=v7
3136                         ;;
3137                 xsparcv9 | xsparc64)
3138                         with_cpu=v9
3139                         ;;
3140                 esac
3141
3142                 # The SPARC port checks this value at compile-time.
3143                 target_cpu_default2="TARGET_CPU_$with_cpu"
3144                 ;;
3145         v850*-*-*)
3146                 # FIXME: The v850 is "special" in that it does not support
3147                 # runtime CPU selection, only --with-cpu.
3148                 case "x$with_cpu" in
3149                 x)
3150                         ;;
3151                 xv850e)
3152                         target_cpu_default2="TARGET_CPU_$with_cpu"
3153                         ;;
3154                 esac
3155                 ;;
3156 esac
3157
3158 t=
3159 all_defaults="abi cpu arch tune schedule float mode fpu divide"
3160 for option in $all_defaults
3161 do
3162         eval "val=\$with_$option"
3163         if test -n "$val"; then
3164                 case " $supported_defaults " in
3165                 *" $option "*)
3166                         ;;
3167                 *)
3168                         echo "This target does not support --with-$option." 2>&1
3169                         echo "Valid --with options are: $supported_defaults" 2>&1
3170                         exit 1
3171                         ;;
3172                 esac
3173
3174                 if test "x$t" = x
3175                 then
3176                         t="{ \"$option\", \"$val\" }"
3177                 else
3178                         t="${t}, { \"$option\", \"$val\" }"
3179                 fi
3180         fi
3181 done
3182
3183 if test "x$t" = x
3184 then
3185         configure_default_options="{ { NULL, NULL} }"
3186 else
3187         configure_default_options="{ ${t} }"
3188 fi
3189
3190 if test "$target_cpu_default2" != ""
3191 then
3192         if test "$target_cpu_default" != ""
3193         then
3194                 target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
3195         else
3196                 target_cpu_default=$target_cpu_default2
3197         fi
3198 fi