gcc/config.gcc

   1 # GCC target-specific configuration file.
   2 # Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
   3 # Free Software Foundation, Inc.
   4
   5 #This file is part of GCC.
   6
   7 #GCC is free software; you can redistribute it and/or modify it under
   8 #the terms of the GNU General Public License as published by the Free
   9 #Software Foundation; either version 2, or (at your option) any later
  10 #version.
  11
  12 #GCC is distributed in the hope that it will be useful, but WITHOUT
  13 #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  14 #FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  15 #for more details.
  16
  17 #You should have received a copy of the GNU General Public License
  18 #along with GCC; see the file COPYING.  If not, write to the Free
  19 #Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
  20 #02110-1301, USA.
  21
  22 # This is the GCC target-specific configuration file
  23 # where a configuration type is mapped to different system-specific
  24 # definitions and files.  This is invoked by the autoconf-generated
  25 # configure script.  Putting it in a separate shell file lets us skip
  26 # running autoconf when modifying target-specific information.
  27
  28 # This file switches on the shell variable ${target}, and also uses the
  29 # following shell variables:
  30 #
  31 #  with_*               Various variables as set by configure.
  32 #
  33 #  enable_threads       Either the name, yes or no depending on whether
  34 #                       threads support was requested.
  35 #
  36 #  default_use_cxa_atexit
  37 #                       "no" by default, can be set to "yes" if a target
  38 #                       wishes to use __cxa_atexit() by default if the
  39 #                       $enable___cxa_atexit variable is not set.
  40 #
  41 #  gas_flag             Either yes or no depending on whether GNU as was
  42 #                       requested.
  43 #
  44 #  gnu_ld_flag          Either yes or no depending on whether GNU ld was
  45 #                       requested.
  46
  47 # This file sets the following shell variables for use by the
  48 # autoconf-generated configure script:
  49 #
  50 #  cpu_type             The name of the cpu, if different from the first
  51 #                       chunk of the canonical target name.
  52 #
  53 #  tm_defines           List of target macros to define for all compilations.
  54 #
  55 #  tm_file              A list of target macro files, if different from
  56 #                       "$cpu_type/$cpu_type.h". Usually it's constructed
  57 #                       per target in a way like this:
  58 #                       tm_file="${tm_file} dbxelf.h elfos.h svr4.h ${cpu_type.h}/elf.h"
  59 #                       Note that the preferred order is:
  60 #                       - specific target header "${cpu_type}/${cpu_type.h}"
  61 #                       - generic headers like dbxelf.h elfos.h, etc.
  62 #                       - specializing target headers like ${cpu_type.h}/elf.h
  63 #                       This helps to keep OS specific stuff out of the CPU
  64 #                       defining header ${cpu_type}/${cpu_type.h}.
  65 #
  66 #  tm_p_file            Location of file with declarations for functions
  67 #                       in $out_file.
  68 #
  69 #  out_file             The name of the machine description C support
  70 #                       file, if different from "$cpu_type/$cpu_type.c".
  71 #
  72 #  md_file              The name of the machine-description file, if
  73 #                       different from "$cpu_type/$cpu_type.md".
  74 #
  75 #  tmake_file           A list of machine-description-specific
  76 #                       makefile-fragments, if different from
  77 #                       "$cpu_type/t-$cpu_type".
  78 #
  79 #  extra_modes          The name of the file containing a list of extra
  80 #                       machine modes, if necessary and different from
  81 #                       "$cpu_type/$cpu_type-modes.def".
  82 #
  83 #  extra_objs           List of extra objects that should be linked into
  84 #                       the compiler proper (cc1, cc1obj, cc1plus)
  85 #                       depending on target.
  86 #
  87 #  extra_gcc_objs       List of extra objects that should be linked into
  88 #                       the compiler driver (gcc) depending on target.
  89 #
  90 #  extra_headers        List of used header files from the directory
  91 #                       config/${cpu_type}.
  92 #
  93 #  extra_passes         List of extra executables compiled for this target
  94 #                       machine, used for compiling from source to object.
  95 #
  96 #  extra_parts          List of extra object files that should be compiled
  97 #                       for this target machine.
  98 #
  99 #  extra_programs       Like extra_passes, but these are used when linking.
 100 #
 101 #  extra_options        List of target-dependent .opt files.
 102 #
 103 #  c_target_objs        List of extra target-dependent objects that be
 104 #                       linked into the C compiler only.
 105 #
 106 #  cxx_target_objs      List of extra target-dependent objects that be
 107 #                       linked into the C++ compiler only.
 108 #
 109 #  target_gtfiles       List of extra source files with type information.
 110 #
 111 #  xm_defines           List of macros to define when compiling for the
 112 #                       target machine.
 113 #
 114 #  xm_file              List of files to include when compiling for the
 115 #                       target machine.
 116 #
 117 #  use_collect2         Set to yes or no, depending on whether collect2
 118 #                       will be used.
 119 #
 120 #  target_cpu_default   Set to override the default target model.
 121 #
 122 #  gdb_needs_out_file_path
 123 #                       Set to yes if gdb needs a dir command with
 124 #                       `dirname $out_file`.
 125 #
 126 #  thread_file          Set to control which thread package to use.
 127 #
 128 #  gas                  Set to yes or no depending on whether the target
 129 #                       system normally uses GNU as.
 130 #
 131 #  need_64bit_hwint     Set to yes if HOST_WIDE_INT must be 64 bits wide
 132 #                       for this target.  This is true iff this target
 133 #                       supports "long" or "wchar_t" wider than 32 bits.
 134 #
 135 #  configure_default_options
 136 #                       Set to an initializer for configure_default_options
 137 #                       in configargs.h, based on --with-cpu et cetera.
 138 #
 139 #  use_fixproto         Set to "yes" if fixproto should be run normally,
 140 #                       "no" if fixproto should never be run.
 141
 142 # The following variables are used in each case-construct to build up the
 143 # outgoing variables:
 144 #
 145 #  gnu_ld               Set to yes or no depending on whether the target
 146 #                       system normally uses GNU ld.
 147
 148 out_file=
 149 tmake_file=
 150 extra_headers=
 151 extra_passes=
 152 extra_parts=
 153 extra_programs=
 154 extra_objs=
 155 extra_gcc_objs=
 156 extra_options=
 157 c_target_objs=
 158 cxx_target_objs=
 159 tm_defines=
 160 xm_defines=
 161 # Set this to force installation and use of collect2.
 162 use_collect2=
 163 # Set this to override the default target model.
 164 target_cpu_default=
 165 # Set this if gdb needs a dir command with `dirname $out_file`
 166 gdb_needs_out_file_path=
 167 # Set this to control which thread package will be used.
 168 thread_file=
 169 # Reinitialize these from the flag values every loop pass, since some
 170 # configure entries modify them.
 171 gas="$gas_flag"
 172 gnu_ld="$gnu_ld_flag"
 173 default_use_cxa_atexit=no
 174 target_gtfiles=
 175 need_64bit_hwint=
 176
 177 # Default to not using fixproto.  Targets which need fixproto should
 178 # specifically set this to 'yes'.
 179 use_fixproto=no
 180
 181 # Don't carry these over build->host->target.  Please.
 182 xm_file=
 183 md_file=
 184
 185 # Obsolete configurations.
 186 case ${target} in
 187    c4x-*                \
 188  | tic4x-*              \
 189  )
 190     if test "x$enable_obsolete" != xyes; then
 191       echo "*** Configuration ${target} is obsolete." >&2
 192       echo "*** Specify --enable-obsolete to build it anyway." >&2
 193       echo "*** Support will be REMOVED in the next major release of GCC," >&2
 194       echo "*** unless a maintainer comes forward." >&2
 195       exit 1
 196     fi;;
 197 esac
 198
 199 # Unsupported targets list.  Do not put an entry in this list unless
 200 # it would otherwise be caught by a more permissive pattern.  The list
 201 # should be in alphabetical order.
 202 case ${target} in
 203    alpha*-*-linux*libc1*                \
 204  | i[34567]86-sequent-sysv              \
 205  | i[34567]86-sequent-sysv[123]*        \
 206  | i[34567]86-go32-*                    \
 207  | i[34567]86-*-go32*                   \
 208  | m68k-*-linux*aout*                   \
 209  | m68k-*-linux*libc1*                  \
 210  | mips64orion*-*-rtems*                \
 211  | powerpc-*-linux*libc1*               \
 212  | sparc-*-linux*aout*                  \
 213  | sparc-*-linux*libc1*                 \
 214  | sparc-hal-solaris2*                  \
 215  | thumb-*-*                            \
 216  | *-*-linux*coff*                      \
 217  | *-*-linux*oldld*                     \
 218  | *-*-rtemsaout*                       \
 219  | *-*-rtemscoff*                       \
 220  | vax-*-vms*                           \
 221  )
 222         echo "*** Configuration ${target} not supported" 1>&2
 223         exit 1
 224         ;;
 225 esac
 226
 227 # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
 228 # updated in each machine entry.  Also set default extra_headers for some
 229 # machines.
 230 tm_p_file=
 231 cpu_type=`echo ${target} | sed 's/-.*$//'`
 232 cpu_is_64bit=
 233 case ${target} in
 234 m32c*-*-*)
 235         cpu_type=m32c
 236         tmake_file=m32c/t-m32c
 237         ;;
 238 alpha*-*-*)
 239         cpu_type=alpha
 240         need_64bit_hwint=yes
 241         ;;
 242 am33_2.0-*-linux*)
 243         cpu_type=mn10300
 244         ;;
 245 strongarm*-*-*)
 246         cpu_type=arm
 247         ;;
 248 arm*-*-*)
 249         cpu_type=arm
 250         extra_headers="mmintrin.h"
 251         ;;
 252 bfin*-*)
 253         cpu_type=bfin
 254         ;;
 255 ep9312*-*-*)
 256         cpu_type=arm
 257         ;;
 258 frv*)   cpu_type=frv
 259         ;;
 260 xscale-*-*)
 261         cpu_type=arm
 262         extra_headers="mmintrin.h"
 263         ;;
 264 i[34567]86-*-*)
 265         cpu_type=i386
 266         extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h pmmintrin.h"
 267         ;;
 268 x86_64-*-*)
 269         cpu_type=i386
 270         extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h pmmintrin.h"
 271         need_64bit_hwint=yes
 272         ;;
 273 ia64-*-*)
 274         extra_headers=ia64intrin.h
 275         need_64bit_hwint=yes
 276         ;;
 277 hppa*-*-* | parisc*-*-*)
 278         cpu_type=pa
 279         ;;
 280 m32r*-*-*)
 281         cpu_type=m32r
 282         ;;
 283 m680[012]0-*-*)
 284         cpu_type=m68k
 285         extra_headers=math-68881.h
 286         ;;
 287 m68k-*-*)
 288         extra_headers=math-68881.h
 289         ;;
 290 mips*-*-*)
 291         cpu_type=mips
 292         need_64bit_hwint=yes
 293         ;;
 294 powerpc*-*-*)
 295         cpu_type=rs6000
 296         extra_headers="ppc-asm.h altivec.h spe.h"
 297         need_64bit_hwint=yes
 298         case x$with_cpu in
 299             xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[345]|xrs64a)
 300                 cpu_is_64bit=yes
 301                 ;;
 302         esac
 303         ;;
 304 rs6000*-*-*)
 305         need_64bit_hwint=yes
 306         ;;
 307 sparc64*-*-*)
 308         cpu_type=sparc
 309         need_64bit_hwint=yes
 310         ;;
 311 sparc*-*-*)
 312         cpu_type=sparc
 313         ;;
 314 s390*-*-*)
 315         cpu_type=s390
 316         need_64bit_hwint=yes
 317         ;;
 318 # Note the 'l'; we need to be able to match e.g. "shle" or "shl".
 319 sh[123456789lbe]*-*-*)
 320         cpu_type=sh
 321         need_64bit_hwint=yes
 322         ;;
 323 tic4x-*-*)
 324         cpu_type=c4x
 325         ;;
 326 esac
 327
 328 tm_file=${cpu_type}/${cpu_type}.h
 329 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
 330 then
 331         tm_p_file=${cpu_type}/${cpu_type}-protos.h
 332 fi
 333 extra_modes=
 334 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
 335 then
 336         extra_modes=${cpu_type}/${cpu_type}-modes.def
 337 fi
 338 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt
 339 then
 340         extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt"
 341 fi
 342
 343 case ${target} in
 344 x86_64-*-*)
 345         tm_file="i386/biarch64.h ${tm_file}"
 346         ;;
 347 esac
 348
 349 # On a.out targets, we need to use collect2.
 350 case ${target} in
 351 *-*-*aout*)
 352         use_collect2=yes
 353         ;;
 354 esac
 355
 356 # Common parts for widely ported systems.
 357 case ${target} in
 358 *-*-darwin*)
 359   tm_file="${tm_file} darwin.h ${cpu_type}/darwin.h"
 360   tm_p_file="${tm_p_file} darwin-protos.h"
 361   tmake_file="t-darwin ${cpu_type}/t-darwin t-slibgcc-darwin"
 362   target_gtfiles="\$(srcdir)/config/darwin.c"
 363   extra_options="${extra_options} darwin.opt"
 364   c_target_objs="darwin-c.o"
 365   cxx_target_objs="darwin-c.o"
 366   extra_parts="crt2.o"
 367   extra_objs="darwin.o"
 368   case ${enable_threads} in
 369     "" | yes | posix) thread_file='posix' ;;
 370   esac
 371   ;;
 372 *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
 373   # This is the place-holder for the generic a.out configuration
 374   # of FreeBSD.  No actual configuration resides here since
 375   # there was only ever a bare-bones ix86 configuration for
 376   # a.out and it exists solely in the machine-specific section.
 377   # This place-holder must exist to avoid dropping into
 378   # the generic ELF configuration of FreeBSD (i.e. it must be
 379   # ordered before that section).
 380   ;;
 381 *-*-freebsd*)
 382   # This is the generic ELF configuration of FreeBSD.  Later
 383   # machine-specific sections may refine and add to this
 384   # configuration.
 385   #
 386   # Due to tm_file entry ordering issues that vary between cpu
 387   # architectures, we only define fbsd_tm_file to allow the
 388   # machine-specific section to dictate the final order of all
 389   # entries of tm_file with the minor exception that components
 390   # of the tm_file set here will always be of the form:
 391   #
 392   # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
 393   #
 394   # The machine-specific section should not tamper with this
 395   # ordering but may order all other entries of tm_file as it
 396   # pleases around the provided core setting.
 397   gas=yes
 398   gnu_ld=yes
 399   extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
 400   case ${target} in
 401     *-*-freebsd3 | *-*-freebsd[3].*)
 402       tm_defines="${tm_defines} FBSD_MAJOR=3" ;;
 403     *-*-freebsd4 | *-*-freebsd[4].*)
 404       tm_defines="${tm_defines} FBSD_MAJOR=4" ;;
 405     *-*-freebsd5 | *-*-freebsd[5].*)
 406       tm_defines="${tm_defines} FBSD_MAJOR=5" ;;
 407     *-*-freebsd6 | *-*-freebsd[6].*)
 408       tm_defines="${tm_defines} FBSD_MAJOR=6" ;;
 409     *-*-freebsd7 | *-*-freebsd[7].*)
 410       tm_defines="${tm_defines} FBSD_MAJOR=7" ;;
 411     *-*-freebsd8 | *-*-freebsd[8].*)
 412       tm_defines="${tm_defines} FBSD_MAJOR=8" ;;
 413     *-*-freebsd9 | *-*-freebsd[9].*)
 414       tm_defines="${tm_defines} FBSD_MAJOR=9" ;;
 415     *)
 416       echo 'Please update *-*-freebsd* in gcc/config.gcc'
 417       exit 1
 418       ;;
 419   esac
 420   tmake_file="t-slibgcc-elf-ver t-freebsd"
 421   case ${enable_threads} in
 422     no)
 423       fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
 424       ;;
 425     "" | yes | posix)
 426       thread_file='posix'
 427       tmake_file="${tmake_file} t-freebsd-thread"
 428       # Before 5.0, FreeBSD can't bind shared libraries to -lc
 429       # when "optionally" threaded via weak pthread_* checks.
 430       case ${target} in
 431         *-*-freebsd[34] | *-*-freebsd[34].*)
 432           tmake_file="${tmake_file} t-slibgcc-nolc-override"
 433           ;;
 434       esac
 435       ;;
 436     *)
 437       echo 'Unknown thread configuration for FreeBSD'
 438       exit 1
 439       ;;
 440   esac
 441   fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h"
 442   ;;
 443 *-*-linux*libc1* | *-*-linux*aout*)
 444   # Avoid the generic linux case.
 445   ;;
 446 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu)
 447   # Must come before *-*-gnu* (because of *-*-linux-gnu* systems).
 448   extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
 449   gas=yes
 450   gnu_ld=yes
 451   case ${enable_threads} in
 452     "" | yes | posix) thread_file='posix' ;;
 453   esac
 454   tmake_file="t-slibgcc-elf-ver t-linux"
 455   ;;
 456 *-*-gnu*)
 457   # On the Hurd, the setup is just about the same on
 458   # each different CPU.  The specific machines that we
 459   # support are matched above and just set $cpu_type.
 460   tm_file="${cpu_type}/gnu.h"
 461   extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
 462   # GNU tools are the only tools.
 463   gas=yes
 464   gnu_ld=yes
 465   # These details are the same as for Linux.
 466   # But here we need a little extra magic.
 467   tmake_file="t-slibgcc-elf-ver t-linux t-gnu"
 468   case ${target} in
 469     alpha*)
 470       tm_file="${cpu_type}/${cpu_type}.h alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h ${tm_file}"
 471       ;;
 472     i[34567]86-*-*)
 473       tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h gnu.h ${tm_file}"
 474       ;;
 475   esac
 476   ;;
 477 *-*-netbsd*)
 478   tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd t-libgcc-pic"
 479   gas=yes
 480   gnu_ld=yes
 481
 482   # NetBSD 2.0 and later get POSIX threads enabled by default.
 483   # Allow them to be explicitly enabled on any other version.
 484   case ${enable_threads} in
 485     "")
 486       case ${target} in
 487         *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
 488           thread_file='posix'
 489           tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
 490           ;;
 491       esac
 492       ;;
 493     yes | posix)
 494       thread_file='posix'
 495       tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
 496       ;;
 497   esac
 498
 499   # NetBSD 1.7 and later are set up to use GCC's crtstuff for
 500   # ELF configurations.  We will clear extra_parts in the
 501   # a.out configurations.
 502   case ${target} in
 503     *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
 504       extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
 505       ;;
 506   esac
 507
 508   # NetBSD 2.0 and later provide __cxa_atexit(), which we use by
 509   # default (unless overridden by --disable-__cxa_atexit).
 510   case ${target} in
 511     *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
 512       default_use_cxa_atexit=yes
 513       ;;
 514   esac
 515   ;;
 516 *-*-openbsd*)
 517   tmake_file="t-libc-ok t-openbsd t-libgcc-pic"
 518   case ${enable_threads} in
 519     yes)
 520       thread_file='posix'
 521       tmake_file="${tmake_file} t-openbsd-thread"
 522       ;;
 523   esac
 524   case ${target} in
 525     *-*-openbsd2.*|*-*-openbsd3.[012])
 526       tm_defines="${tm_defines} HAS_LIBC_R=1" ;;
 527   esac
 528   ;;
 529 *-*-rtems*)
 530   case ${enable_threads} in
 531     yes) thread_file='rtems' ;;
 532   esac
 533   ;;
 534 *-*-vxworks*)
 535   tmake_file=t-vxworks
 536   tm_file="${tm_file} elfos.h svr4.h"
 537   xm_defines=POSIX
 538   extra_options="${extra_options} vxworks.opt"
 539   case ${enable_threads} in
 540     no) ;;
 541     "" | yes | vxworks) thread_file='vxworks' ;;
 542     *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
 543   esac
 544   ;;
 545 esac
 546
 547 case ${target} in
 548 # Support site-specific machine types.
 549 *local*)
 550         rest=`echo ${target} | sed -e "s/$cpu_type-//"`
 551         tm_file=${cpu_type}/$rest.h
 552         if test -f $srcdir/config/${cpu_type}/xm-$rest.h
 553         then xm_file=${cpu_type}/xm-$rest.h
 554         fi
 555         if test -f $srcdir/config/${cpu_type}/t-$rest
 556         then tmake_file=${cpu_type}/t-$rest
 557         fi
 558         ;;
 559 alpha*-*-unicosmk*)
 560         use_collect2=yes
 561         tm_file="${tm_file} alpha/unicosmk.h"
 562
 563         # Don't include t-ieee for now because we don't support that yet
 564         # tmake_file="alpha/t-ieee"
 565         tmake_file="alpha/t-unicosmk"
 566         use_fixproto=yes
 567         ;;
 568 alpha*-*-linux*)
 569         tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
 570         target_cpu_default="MASK_GAS"
 571         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
 572         ;;
 573 alpha*-*-gnu*)
 574         target_cpu_default="MASK_GAS"
 575         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
 576         ;;
 577 alpha*-*-freebsd*)
 578         tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
 579         target_cpu_default="MASK_GAS"
 580         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
 581         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
 582         ;;
 583 alpha*-*-netbsd*)
 584         tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
 585         target_cpu_default="MASK_GAS"
 586         tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
 587         ;;
 588 alpha*-*-openbsd*)
 589         tm_defines="OBSD_NO_DYNAMIC_LIBRARIES OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
 590         tm_file="alpha/alpha.h openbsd.h alpha/openbsd.h"
 591         # default x-alpha is only appropriate for dec-osf.
 592         target_cpu_default="MASK_GAS"
 593         tmake_file="alpha/t-alpha alpha/t-ieee"
 594         ;;
 595 alpha*-dec-osf[45]*)
 596         if test x$stabs = xyes
 597         then
 598                 tm_file="${tm_file} dbx.h"
 599         fi
 600         if test x$gas != xyes
 601         then
 602                 extra_passes="mips-tfile mips-tdump"
 603         fi
 604         use_collect2=yes
 605         tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf4"
 606         tm_file="${tm_file} alpha/osf.h"
 607         extra_headers=va_list.h
 608         case ${target} in
 609           *-*-osf4*)
 610             # Define TARGET_SUPPORT_ARCH except on 4.0a.
 611             case ${target} in
 612                 *-*-osf4.0a) ;;
 613                 *) tm_defines="TARGET_SUPPORT_ARCH=1"
 614             esac
 615             ;;
 616           *-*-osf5*)
 617             tm_file="${tm_file} alpha/osf5.h"
 618             tm_defines="TARGET_SUPPORT_ARCH=1"
 619             ;;
 620         esac
 621         case ${enable_threads} in
 622           "" | yes | posix)
 623             thread_file='posix'
 624             tmake_file="${tmake_file} alpha/t-osf-pthread"
 625             ;;
 626         esac
 627         ;;
 628 alpha64-dec-*vms*)
 629         tm_file="${tm_file} alpha/vms.h alpha/vms64.h"
 630         xm_file="alpha/xm-vms.h"
 631         tmake_file="alpha/t-alpha alpha/t-vms alpha/t-vms64 alpha/t-ieee"
 632         prefix=/gnu
 633         local_prefix=/gnu
 634         ;;
 635 alpha*-dec-*vms*)
 636         tm_file="${tm_file} alpha/vms.h"
 637         xm_file=alpha/xm-vms.h
 638         tmake_file="alpha/t-alpha alpha/t-vms alpha/t-ieee"
 639         prefix=/gnu
 640         local_prefix=/gnu
 641         ;;
 642 arc-*-elf*)
 643         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
 644         extra_parts="crtinit.o crtfini.o"
 645         use_fixproto=yes
 646         ;;
 647 arm-*-coff* | armel-*-coff*)
 648         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h"
 649         tmake_file="arm/t-arm arm/t-arm-coff"
 650         ;;
 651 arm-semi-aof | armel-semi-aof)
 652         tm_file="arm/semiaof.h arm/aof.h arm/arm.h"
 653         tmake_file="arm/t-arm arm/t-semi"
 654         ;;
 655 arm-wrs-vxworks)
 656         tm_file="dbxelf.h elfos.h svr4.h vxworks.h arm/elf.h arm/aout.h arm/arm.h arm/vxworks.h"
 657         tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
 658         ;;
 659 arm*-*-freebsd*|strongarm*-*-freebsd*)
 660         tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
 661         tmake_file="${tmake_file} arm/t-arm arm/t-strongarm-elf"
 662         ;;
 663 arm*-*-netbsdelf*)
 664         tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
 665         tmake_file="${tmake_file} arm/t-arm arm/t-netbsd"
 666         ;;
 667 arm*-*-netbsd*)
 668         tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h"
 669         tmake_file="t-netbsd arm/t-arm arm/t-netbsd"
 670         extra_parts=""
 671         use_collect2=yes
 672         ;;
 673 arm*-*-linux*)                  # ARM GNU/Linux with ELF
 674         tm_file="dbxelf.h elfos.h linux.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
 675         tmake_file="${tmake_file} t-linux arm/t-arm"
 676         case ${target} in
 677         arm*-*-linux-gnueabi)
 678             tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h"
 679             tmake_file="$tmake_file arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi"
 680             # The BPABI long long divmod functions return a 128-bit value in
 681             # registers r0-r3.  Correctly modeling that requires the use of
 682             # TImode.
 683             need_64bit_hwint=yes
 684             # The EABI requires the use of __cxa_atexit.
 685             default_use_cxa_atexit=yes
 686             ;;
 687         *)
 688             tmake_file="$tmake_file arm/t-linux"
 689             ;;
 690         esac
 691         tm_file="$tm_file arm/aout.h arm/arm.h"
 692         ;;
 693 arm*-*-uclinux*)                # ARM ucLinux
 694         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/linux-gas.h arm/linux-elf.h arm/uclinux-elf.h"
 695         tmake_file="arm/t-arm arm/t-arm-elf"
 696         ;;
 697 arm*-*-ecos-elf)
 698         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
 699         tmake_file="arm/t-arm arm/t-arm-elf"
 700         ;;
 701 arm*-*-eabi* | arm*-*-symbianelf* )
 702         # The BPABI long long divmod functions return a 128-bit value in
 703         # registers r0-r3.  Correctly modeling that requires the use of
 704         # TImode.
 705         need_64bit_hwint=yes
 706         default_use_cxa_atexit=yes
 707         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
 708         tmake_file="arm/t-arm arm/t-arm-elf"
 709         case ${target} in
 710         arm*-*-eabi*)
 711           tmake_file="${tmake_file} arm/t-bpabi"
 712           ;;
 713         arm*-*-symbianelf*)
 714           tm_file="${tm_file} arm/symbian.h"
 715           # We do not include t-bpabi for Symbian OS because the system
 716           # provides its own implementation of the BPABI functions.
 717           tmake_file="${tmake_file} t-slibgcc-elf-ver arm/t-symbian"
 718           ;;
 719         esac
 720         tm_file="${tm_file} arm/aout.h arm/arm.h"
 721         ;;
 722 arm*-*-rtems*)
 723         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h"
 724         tmake_file="arm/t-arm arm/t-arm-elf t-rtems arm/t-rtems"
 725         ;;
 726 arm*-*-elf | ep9312-*-elf)
 727         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
 728         tmake_file="arm/t-arm arm/t-arm-elf"
 729         ;;
 730 arm*-wince-pe*)
 731         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h"
 732         tmake_file="arm/t-arm arm/t-wince-pe"
 733         extra_options="${extra_options} arm/pe.opt"
 734         extra_objs="pe.o"
 735         ;;
 736 arm-*-pe*)
 737         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h"
 738         tmake_file="arm/t-arm arm/t-pe"
 739         extra_options="${extra_options} arm/pe.opt"
 740         extra_objs="pe.o"
 741         ;;
 742 arm*-*-kaos*)
 743         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-arm.h"
 744         tmake_file="arm/t-arm arm/t-arm-elf"
 745         ;;
 746 avr-*-rtems*)
 747         tm_file="avr/avr.h dbxelf.h avr/rtems.h rtems.h"
 748         tmake_file="avr/t-avr t-rtems avr/t-rtems"
 749         ;;
 750 avr-*-*)
 751         tm_file="avr/avr.h dbxelf.h"
 752         use_fixproto=yes
 753         ;;
 754 bfin*-elf*)
 755         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
 756         tmake_file=bfin/t-bfin-elf
 757         use_collect2=no
 758         ;;
 759 bfin*-uclinux*)
 760         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/uclinux.h"
 761         tmake_file=bfin/t-bfin-elf
 762         use_collect2=no
 763         ;;
 764 bfin*-*)
 765         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
 766         tmake_file=bfin/t-bfin
 767         use_collect2=no
 768         ;;
 769 c4x-*-rtems* | tic4x-*-rtems*)
 770         tmake_file="c4x/t-c4x t-rtems c4x/t-rtems"
 771         tm_file="c4x/c4x.h c4x/rtems.h rtems.h"
 772         c_target_objs="c4x-c.o"
 773         cxx_target_objs="c4x-c.o"
 774         ;;
 775 c4x-* | tic4x-*)
 776         tmake_file=c4x/t-c4x
 777         c_target_objs="c4x-c.o"
 778         cxx_target_objs="c4x-c.o"
 779         ;;
 780 cris-*-aout)
 781         tm_file="dbxelf.h ${tm_file} cris/aout.h"
 782         gas=yes
 783         tmake_file="cris/t-cris cris/t-aout"
 784         extra_options="${extra_options} cris/aout.opt"
 785         ;;
 786 cris-*-elf | cris-*-none)
 787         tm_file="dbxelf.h elfos.h ${tm_file}"
 788         tmake_file="cris/t-cris cris/t-elfmulti"
 789         gas=yes
 790         extra_options="${extra_options} cris/elf.opt"
 791         ;;
 792 cris-*-linux*)
 793         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h"
 794         # We need to avoid using t-linux, so override default tmake_file
 795         tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
 796         extra_options="${extra_options} cris/linux.opt"
 797         ;;
 798 crx-*-elf)
 799         tm_file="elfos.h ${tm_file}"
 800         extra_parts="crtbegin.o crtend.o"
 801         use_collect2=no
 802         ;;
 803 fr30-*-elf)
 804         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
 805         tmake_file=fr30/t-fr30
 806         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
 807         use_fixproto=yes
 808         ;;
 809 frv-*-elf)
 810         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} frv/frv-abi.h"
 811         tmake_file=frv/t-frv
 812         use_fixproto=yes
 813         ;;
 814 frv-*-*linux*)
 815         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} \
 816                  linux.h frv/linux.h frv/frv-abi.h"
 817         tmake_file="${tmake_file} frv/t-frv frv/t-linux"
 818         ;;
 819 h8300-*-rtemscoff*)
 820         tmake_file="h8300/t-h8300 t-rtems h8300/t-rtems"
 821         tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h h8300/rtems.h rtems.h"
 822         ;;
 823 h8300-*-rtems*)
 824         tmake_file="h8300/t-h8300 h8300/t-elf t-rtems h8300/t-rtems"
 825         tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h"
 826         ;;
 827 h8300-*-elf*)
 828         tmake_file="h8300/t-h8300 h8300/t-elf"
 829         tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h"
 830         use_fixproto=yes
 831         ;;
 832 h8300-*-*)
 833         tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h"
 834         use_fixproto=yes
 835         ;;
 836 hppa*64*-*-linux* | parisc*64*-*-linux*)
 837         target_cpu_default="MASK_PA_11|MASK_PA_20"
 838         tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \
 839                  pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h pa/pa64-linux.h"
 840         tmake_file="${tmake_file} pa/t-linux64"
 841         gas=yes gnu_ld=yes
 842         need_64bit_hwint=yes
 843         ;;
 844 hppa*-*-linux* | parisc*-*-linux*)
 845         target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
 846         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \
 847                  pa/pa32-regs.h pa/pa32-linux.h"
 848         tmake_file="${tmake_file} pa/t-linux"
 849         # if not configured with --enable-sjlj-exceptions, bump the
 850         # libgcc version number
 851         if test x$sjlj != x1; then
 852             tmake_file="$tmake_file pa/t-slibgcc-elf-ver"
 853         fi
 854         ;;
 855 # port not yet contributed.
 856 #hppa*-*-openbsd*)
 857 #       target_cpu_default="MASK_PA_11"
 858 #       ;;
 859 hppa1.1-*-pro*)
 860         target_cpu_default="MASK_PORTABLE_RUNTIME|MASK_NO_SPACE_REGS|MASK_SOFT_FLOAT"
 861         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h \
 862                  pa/pa-pro-end.h libgloss.h"
 863         tmake_file="pa/t-pro"
 864         ;;
 865 hppa1.1-*-osf*)
 866         target_cpu_default="MASK_PA_11"
 867         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-osf.h"
 868         tmake_file="pa/t-pa"
 869         use_collect2=yes
 870         ;;
 871 hppa1.1-*-bsd*)
 872         target_cpu_default="MASK_PA_11"
 873         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h"
 874         tmake_file="pa/t-pa"
 875         use_collect2=yes
 876         ;;
 877 hppa[12]*-*-hpux10*)
 878         case ${target} in
 879         hppa1.1-*-* | hppa2*-*-*)
 880                 target_cpu_default="MASK_PA_11"
 881                 ;;
 882         esac
 883         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
 884                  pa/pa-hpux.h pa/pa-hpux10.h"
 885         extra_options="${extra_options} pa/pa-hpux.opt"
 886         case ${target} in
 887         *-*-hpux10.[1-9]*)
 888                 tm_file="${tm_file} pa/pa-hpux1010.h"
 889                 extra_options="${extra_options} pa/pa-hpux1010.opt"
 890                 ;;
 891         esac
 892         tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
 893         case ${enable_threads} in
 894           "")
 895             if test x$have_pthread_h = xyes ; then
 896               tmake_file="${tmake_file} pa/t-dce-thr"
 897             fi
 898             ;;
 899           yes | dce)
 900             tmake_file="${tmake_file} pa/t-dce-thr"
 901             ;;
 902         esac
 903         if test x$sjlj != x1; then
 904             tmake_file="$tmake_file pa/t-slibgcc-elf-ver"
 905         fi
 906         use_collect2=yes
 907         use_fixproto=yes
 908         ;;
 909 hppa*64*-*-hpux11*)
 910         target_cpu_default="MASK_PA_11|MASK_PA_20"
 911         if test x$gnu_ld = xyes
 912         then
 913                 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
 914         fi
 915         if test x$gas = xyes
 916         then
 917                 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
 918                          pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
 919                          pa/pa-hpux11.h"
 920         else
 921                 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h pa/elf.h \
 922                          pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
 923                          pa/pa-hpux11.h"
 924         fi
 925         case ${target} in
 926         *-*-hpux11.[1-9]*)
 927                 tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
 928                 extra_options="${extra_options} pa/pa-hpux1111.opt"
 929                 ;;
 930         *)
 931                 tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
 932                 ;;
 933         esac
 934         extra_options="${extra_options} pa/pa-hpux.opt \
 935                        pa/pa-hpux1010.opt pa/pa64-hpux.opt"
 936         need_64bit_hwint=yes
 937         tmake_file="pa/t-pa64 pa/t-pa-hpux pa/t-hpux-shlib"
 938         if test x$sjlj != x1; then
 939             tmake_file="$tmake_file pa/t-slibgcc-elf-ver"
 940         fi
 941         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
 942         case x${enable_threads} in
 943         xyes | xposix )
 944                 thread_file=posix
 945                 ;;
 946         esac
 947         ;;
 948 hppa[12]*-*-hpux11*)
 949         case ${target} in
 950         hppa1.1-*-* | hppa2*-*-*)
 951                 target_cpu_default="MASK_PA_11"
 952                 ;;
 953         esac
 954         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
 955                  pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h"
 956         extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt"
 957         case ${target} in
 958         *-*-hpux11.[1-9]*)
 959                 tm_file="${tm_file} pa/pa-hpux1111.h"
 960                 extra_options="${extra_options} pa/pa-hpux1111.opt"
 961                 ;;
 962         esac
 963         tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
 964         if test x$sjlj != x1; then
 965             tmake_file="$tmake_file pa/t-slibgcc-elf-ver"
 966         fi
 967         case x${enable_threads} in
 968         xyes | xposix )
 969                 thread_file=posix
 970                 ;;
 971         esac
 972         use_collect2=yes
 973         ;;
 974 i[34567]86-*-darwin*)
 975         # All the configuration is presently done generically.
 976         ;;
 977 i[34567]86-*-elf*)
 978         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h"
 979         tmake_file="i386/t-i386elf t-svr4"
 980         use_fixproto=yes
 981         ;;
 982 i[34567]86-sequent-ptx4* | i[34567]86-sequent-sysv4*)
 983         if test x$gas = xyes
 984         then
 985                 tm_file="${tm_file} usegas.h"
 986         fi
 987         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ptx4.h i386/ptx4-i.h"
 988         tmake_file=t-svr4
 989         extra_parts="crtbegin.o crtend.o"
 990         use_fixproto=yes
 991         ;;
 992 i[34567]86-*-aout*)
 993         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/i386-aout.h"
 994         use_fixproto=yes
 995         ;;
 996 i[34567]86-*-beoself* | i[34567]86-*-beos*)
 997         tmake_file='i386/t-beos i386/t-crtpic'
 998         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/beos-elf.h"
 999         extra_parts='crtbegin.o crtend.o'
1000         ;;
1001 i[34567]86-*-freebsd*)
1002         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
1003         ;;
1004 x86_64-*-freebsd*)
1005         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
1006         ;;
1007 i[34567]86-*-netbsdelf*)
1008         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
1009         ;;
1010 i[34567]86-*-netbsd*)
1011         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h"
1012         tmake_file=t-netbsd
1013         extra_parts=""
1014         use_collect2=yes
1015         ;;
1016 x86_64-*-netbsd*)
1017         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
1018         ;;
1019 i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123])
1020         tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h"
1021         # needed to unconfuse gdb
1022         tmake_file="t-libc-ok t-openbsd i386/t-openbsd"
1023         # we need collect2 until our bug is fixed...
1024         use_collect2=yes
1025         ;;
1026 i[34567]86-*-openbsd*)
1027         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
1028         tm_file="${tm_file} openbsd.h i386/openbsdelf.h"
1029         gas=yes
1030         gnu_ld=yes
1031         ;;
1032 i[34567]86-*-coff*)
1033         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/i386-coff.h"
1034         use_fixproto=yes
1035         ;;
1036 i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu)
1037                         # Intel 80386's running GNU/*
1038                         # with ELF format using glibc 2
1039         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h"
1040         case ${target} in
1041         i[34567]86-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h i386/knetbsd-gnu.h" ;;
1042         i[34567]86-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h i386/kfreebsd-gnu.h" ;;
1043         esac
1044         tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtfm"
1045         ;;
1046 x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
1047         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h \
1048                  i386/x86-64.h i386/linux64.h"
1049         case ${target} in
1050         x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h" ;;
1051         x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;;
1052         esac
1053         tmake_file="${tmake_file} i386/t-linux64 i386/t-crtfm"
1054         ;;
1055 i[34567]86-*-gnu*)
1056         ;;
1057 i[34567]86-pc-msdosdjgpp*)
1058         xm_file=i386/xm-djgpp.h
1059         tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h"
1060         tmake_file=i386/t-djgpp
1061         extra_options="${extra_options} i386/djgpp.opt"
1062         gnu_ld=yes
1063         gas=yes
1064         ;;
1065 i[34567]86-*-lynxos*)
1066         xm_defines=POSIX
1067         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
1068         tmake_file="i386/t-crtstuff t-lynx"
1069         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1070         extra_options="${extra_options} lynx.opt"
1071         thread_file=lynx
1072         gnu_ld=yes
1073         gas=yes
1074         ;;
1075 i[3456x]86-*-netware*)
1076         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h tm-dwarf2.h i386/netware.h"
1077         tmake_file=i386/t-netware
1078         extra_objs=netware.o
1079         case /${with_ld} in
1080         */nwld)
1081                 extra_objs="$extra_objs nwld.o"
1082                 tm_file="${tm_file} i386/nwld.h"
1083                 tmake_file="${tmake_file} i386/t-nwld"
1084                 extra_parts="crt0.o libgcc.def libc.def libcpre.def posixpre.def"
1085                 ;;
1086         esac
1087         case x${enable_threads} in
1088         x | xyes | xposix) thread_file='posix';;
1089         xnks) thread_file='nks';;
1090         xno) ;;
1091         *) echo 'Unknown thread configuration for NetWare' >&2; exit 1;;
1092         esac
1093         ;;
1094 i[34567]86-*-nto-qnx*)
1095         tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h svr4.h i386/unix.h i386/nto.h"
1096         tmake_file=i386/t-nto
1097         gnu_ld=yes
1098         gas=yes
1099         ;;
1100 i[34567]86-*-rtems*)
1101         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h"
1102         extra_parts="crtbegin.o crtend.o crti.o crtn.o"
1103         tmake_file="i386/t-rtems-i386 i386/t-crtstuff t-rtems"
1104         ;;
1105 i[34567]86-*-sco3.2v5*) # 80386 running SCO Open Server 5
1106         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/sco5.h"
1107         if test x$gas = xyes
1108         then
1109                 tm_file="usegas.h ${tm_file}"
1110         fi
1111         tmake_file=i386/t-sco5
1112         extra_parts="crtbegin.o crtend.o"
1113         extra_options="${extra_options} i386/sco5.opt"
1114         use_fixproto=yes
1115         ;;
1116 i[34567]86-*-solaris2*)
1117         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h"
1118         case ${target} in
1119         *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
1120                 tm_file="${tm_file} sol26.h"
1121         esac
1122         tm_file="${tm_file} i386/sol2.h"
1123         tmake_file="t-sol2 i386/t-sol2 t-svr4"
1124         c_target_objs="sol2-c.o"
1125         cxx_target_objs="sol2-c.o"
1126         extra_objs="sol2.o"
1127         tm_p_file="${tm_p_file} sol2-protos.h"
1128         if test x$gnu_ld = xyes; then
1129                 tmake_file="$tmake_file t-slibgcc-elf-ver"
1130                 tm_defines="${tm_defines} TARGET_GNU_LD=1"
1131         else
1132                 tmake_file="$tmake_file t-slibgcc-sld"
1133         fi
1134         case ${target} in
1135         *-*-solaris2.[789] | *-*-solaris2.1[0-9]*)
1136                 tm_file="$tm_file tm-dwarf2.h"
1137                 ;;
1138         esac
1139         case ${target} in
1140         *-*-solaris2.1[0-9]*)
1141                 tm_file="${tm_file} i386/x86-64.h i386/sol2-10.h"
1142                 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1143                 tmake_file="$tmake_file i386/t-sol2-10"
1144                 need_64bit_hwint=yes
1145                 # Solaris 2.10 provides crt1.o, crti.o, crtn.o, and gcrt1.o as
1146                 # part of the base system.
1147                 extra_parts="gmon.o crtbegin.o crtend.o"
1148                 ;;
1149         *)
1150                 extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
1151                 ;;
1152         esac
1153         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
1154           "":yes:* | yes:yes:* )
1155                 case ${target} in
1156                   *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
1157                         thread_file=posix95
1158                         ;;
1159                   *)
1160                         thread_file=posix
1161                         ;;
1162                 esac
1163                 ;;
1164           "":*:yes | yes:*:yes )
1165                 thread_file=solaris
1166                 ;;
1167         esac
1168         ;;
1169 i[34567]86-*-sysv5*)           # Intel x86 on System V Release 5
1170        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv5.h"
1171        if test x$stabs = xyes
1172        then
1173                tm_file="${tm_file} dbx.h"
1174        fi
1175        tmake_file="i386/t-crtpic t-svr4"
1176        extra_parts="crtbegin.o crtend.o"
1177        if test x$enable_threads = xyes; then
1178                thread_file='posix'
1179        fi
1180         use_fixproto=yes
1181        ;;
1182 i[34567]86-*-sysv4*)            # Intel 80386's running system V.4
1183         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv4-cpp.h"
1184         if test x$stabs = xyes
1185         then
1186                 tm_file="${tm_file} dbx.h"
1187         fi
1188         tmake_file="i386/t-crtpic t-svr4"
1189         extra_parts="crtbegin.o crtend.o"
1190         use_fixproto=yes
1191         ;;
1192 i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae)
1193         tm_file="${tm_file} i386/sysv4.h i386/unix.h i386/att.h vx-common.h"
1194         case ${target} in
1195           *-vxworksae*)
1196             tm_file="${tm_file} vxworksae.h i386/vxworksae.h"
1197             tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae"
1198             ;;
1199           *)
1200             tm_file="${tm_file} vxworks.h i386/vxworks.h"
1201             tmake_file="${tmake_file} i386/t-vxworks"
1202             ;;
1203         esac
1204         ;;
1205 i[34567]86-*-pe | i[34567]86-*-cygwin*)
1206         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h"
1207         xm_file=i386/xm-cygwin.h
1208         tmake_file="i386/t-cygwin i386/t-cygming"
1209         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1210         extra_options="${extra_options} i386/cygming.opt"
1211         extra_objs="winnt.o winnt-stubs.o"
1212         c_target_objs=cygwin2.o
1213         cxx_target_objs="cygwin2.o winnt-cxx.o"
1214         extra_gcc_objs=cygwin1.o
1215         if test x$enable_threads = xyes; then
1216                 thread_file='posix'
1217         fi
1218         ;;
1219 i[34567]86-*-mingw32*)
1220         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h"
1221         xm_file=i386/xm-mingw32.h
1222         tmake_file="i386/t-cygming i386/t-mingw32"
1223         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1224         extra_options="${extra_options} i386/cygming.opt"
1225         extra_objs="winnt.o winnt-stubs.o"
1226         cxx_target_objs=winnt-cxx.o
1227         case ${enable_threads} in
1228           "" | yes | win32) thread_file='win32' ;;
1229         esac
1230         case ${target} in
1231                 *mingw32crt*)
1232                         tm_file="${tm_file} i386/crtdll.h"
1233                         ;;
1234                 *mingw32msv* | *mingw32*)
1235                         ;;
1236         esac
1237         ;;
1238 i[34567]86-*-uwin*)
1239         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygwin.h i386/uwin.h"
1240         tmake_file="i386/t-cygwin i386/t-uwin"
1241         extra_objs=winnt.o
1242         extra_options="${extra_options} i386/cygming.opt"
1243         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1244         if test x$enable_threads = xyes; then
1245                 thread_file='win32'
1246         fi
1247         use_fixproto=yes
1248         ;;
1249 i[34567]86-*-interix3*)
1250         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
1251         tmake_file="i386/t-interix"
1252         extra_objs=winnt.o
1253         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1254         if test x$enable_threads = xyes ; then
1255                 thread_file='posix'
1256         fi
1257         if test x$stabs = xyes ; then
1258                 tm_file="${tm_file} dbxcoff.h"
1259         fi
1260         ;;
1261 i[34567]86-*-kaos*)
1262         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h kaos.h i386/kaos-i386.h"
1263         tmake_file="i386/t-i386elf t-svr4"
1264         ;;
1265 ia64*-*-elf*)
1266         tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/elf.h"
1267         tmake_file="ia64/t-ia64"
1268         target_cpu_default="0"
1269         if test x$gas = xyes
1270         then
1271                 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1272         fi
1273         if test x$gnu_ld = xyes
1274         then
1275                 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1276         fi
1277         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1278         use_fixproto=yes
1279         ;;
1280 ia64*-*-freebsd*)
1281         tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
1282         target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1283         tmake_file="${tmake_file} ia64/t-ia64"
1284         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1285         ;;
1286 ia64*-*-linux*)
1287         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h ia64/sysv4.h ia64/linux.h"
1288         tmake_file="${tmake_file} ia64/t-ia64 t-libunwind ia64/t-glibc"
1289         if test x$with_system_libunwind != xyes ; then
1290                 tmake_file="${tmake_file} t-libunwind-elf ia64/t-glibc-libunwind"
1291         fi
1292         target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1293         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1294         ;;
1295 ia64*-*-hpux*)
1296         tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h"
1297         tmake_file="ia64/t-ia64 ia64/t-hpux"
1298         target_cpu_default="MASK_GNU_AS"
1299         case x$enable_threads in
1300         xyes | xposix )
1301                 thread_file=posix
1302                 ;;
1303         esac
1304         use_collect2=no
1305         c_target_objs="ia64-c.o"
1306         cxx_target_objs="ia64-c.o"
1307         extra_options="${extra_options} ia64/ilp32.opt"
1308         # If we decide to run fixproto we should define FIXPROTO_DEFINES
1309         # in ia64/t-hpux, and also fix the definition of putenv in
1310         # sys-protos.h (const char not char).
1311         ;;
1312 iq2000*-*-elf*)
1313         tm_file="svr4.h elfos.h iq2000/iq2000.h"
1314         tmake_file=iq2000/t-iq2000
1315         out_file=iq2000/iq2000.c
1316         md_file=iq2000/iq2000.md
1317         use_fixproto=yes
1318         ;;
1319 m32r-*-elf*)
1320         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1321         extra_parts="crtinit.o crtfini.o"
1322         use_fixproto=yes
1323         ;;
1324 m32rle-*-elf*)
1325         tm_file="dbxelf.h elfos.h svr4.h m32r/little.h ${tm_file}"
1326         extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o"
1327         use_fixproto=yes
1328         ;;
1329 m32r-*-linux*)
1330         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} m32r/linux.h"
1331         # We override the tmake_file for linux -- why?
1332         tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1333         gnu_ld=yes
1334         use_fixproto=yes
1335         if test x$enable_threads = xyes; then
1336                 thread_file='posix'
1337         fi
1338         ;;
1339 m32rle-*-linux*)
1340         tm_file="dbxelf.h elfos.h svr4.h linux.h m32r/little.h ${tm_file} m32r/linux.h"
1341         # We override the tmake_file for linux -- why?
1342         tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1343         gnu_ld=yes
1344         use_fixproto=yes
1345         if test x$enable_threads = xyes; then
1346                 thread_file='posix'
1347         fi
1348         ;;
1349 # m68hc11 and m68hc12 share the same machine description.
1350 m68hc11-*-*|m6811-*-*)
1351         tm_file="dbxelf.h elfos.h m68hc11/m68hc11.h"
1352         tm_p_file="m68hc11/m68hc11-protos.h"
1353         md_file="m68hc11/m68hc11.md"
1354         out_file="m68hc11/m68hc11.c"
1355         tmake_file="m68hc11/t-m68hc11-gas"
1356         use_fixproto=yes
1357         ;;
1358 m68hc12-*-*|m6812-*-*)
1359         tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h m68hc11/m68hc11.h"
1360         tm_p_file="m68hc11/m68hc11-protos.h"
1361         md_file="m68hc11/m68hc11.md"
1362         out_file="m68hc11/m68hc11.c"
1363         tmake_file="m68hc11/t-m68hc11-gas"
1364         extra_options="${extra_options} m68hc11/m68hc11.opt"
1365         use_fixproto=yes
1366         ;;
1367 m68k-*-aout*)
1368         tmake_file=m68k/t-m68kbare
1369         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kemb.h m68k/m68k-aout.h libgloss.h"
1370         ;;
1371 m68k-*-coff*)
1372         tmake_file=m68k/t-m68kbare
1373         tm_defines="MOTOROLA USE_GAS"
1374         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kemb.h dbxcoff.h m68k/coff.h dbx.h"
1375         use_fixproto=yes
1376         ;;
1377 m68020-*-elf* | m68k-*-elf*)
1378         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h"
1379         tm_defines="MOTOROLA USE_GAS"
1380         tmake_file=m68k/t-m68kelf
1381         extra_parts="crtbegin.o crtend.o"
1382         ;;
1383 m68010-*-netbsdelf* | m68k*-*-netbsdelf*)
1384         tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
1385         tm_defines="MOTOROLA USE_GAS"
1386         case ${target} in
1387         m68010*)
1388                 target_cpu_default="0"
1389                 ;;
1390         *)
1391                 target_cpu_default="MASK_68020|MASK_68881|MASK_BITFIELD"
1392                 ;;
1393         esac
1394         ;;
1395 m68k*-*-openbsd*)
1396         # needed to unconfuse gdb
1397         tm_defines="OBSD_OLD_GAS TARGET_DEFAULT=(MASK_68020|MASK_68881|MASK_BITFIELD)"
1398         tm_file="m68k/m68k.h openbsd.h m68k/openbsd.h"
1399         tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
1400         # we need collect2 until our bug is fixed...
1401         use_collect2=yes
1402         ;;
1403 m68k-*-uclinux*)                # Motorola m68k/ColdFire running uClinux with uClibc
1404         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux.h"
1405         tm_defines="MOTOROLA USE_GAS"
1406         tmake_file=m68k/t-uclinux
1407         use_fixproto=no
1408         ;;
1409 m68k-*-linux*)          # Motorola m68k's running GNU/Linux
1410                                 # with ELF format using glibc 2
1411                                 # aka the GNU/Linux C library 6.
1412         tm_file="m68k/m68k.h dbxelf.h elfos.h svr4.h linux.h m68k/linux.h"
1413         extra_options="${extra_options} m68k/ieee.opt"
1414         tm_defines="MOTOROLA USE_GAS"
1415         # if not configured with --enable-sjlj-exceptions, bump the
1416         # libgcc version number
1417         if test x$sjlj != x1; then
1418             tmake_file="$tmake_file m68k/t-slibgcc-elf-ver"
1419         fi
1420         ;;
1421 m68k-*-rtems*)
1422         tmake_file="m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems"
1423         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h"
1424         tm_defines="MOTOROLA USE_GAS"
1425         extra_parts="crtbegin.o crtend.o"
1426         ;;
1427 mcore-*-elf)
1428         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} mcore/mcore-elf.h"
1429         tmake_file=mcore/t-mcore
1430         use_fixproto=yes
1431         ;;
1432 mcore-*-pe*)
1433         tm_file="svr3.h dbxcoff.h ${tm_file} mcore/mcore-pe.h"
1434         tmake_file=mcore/t-mcore-pe
1435         use_fixproto=yes
1436         ;;
1437 mips-sgi-irix[56]*)
1438         tm_file="elfos.h ${tm_file} mips/iris.h"
1439         tmake_file="mips/t-iris mips/t-slibgcc-irix"
1440         target_cpu_default="MASK_ABICALLS"
1441         case ${target} in
1442         *-*-irix5*)
1443                 tm_file="${tm_file} mips/iris5.h"
1444                 ;;
1445
1446         *-*-irix6*)
1447                 tm_file="${tm_file} mips/iris6.h"
1448                 tmake_file="${tmake_file} mips/t-iris6"
1449                 tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
1450                 ;;
1451         esac
1452         if test "x$stabs" = xyes
1453         then
1454                 tm_file="${tm_file} dbx.h mips/dbxmdebug.h"
1455         fi
1456         if test "x$gnu_ld" = xyes
1457         then
1458                 tm_defines="${tm_defines} IRIX_USING_GNU_LD"
1459         fi
1460 #       if test x$enable_threads = xyes; then
1461 #               thread_file='irix'
1462 #       fi
1463         use_fixproto=yes
1464         ;;
1465 mips*-*-netbsd*)                        # NetBSD/mips, either endian.
1466         target_cpu_default="MASK_ABICALLS"
1467         tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
1468         ;;
1469 mips64*-*-linux*)
1470         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h mips/linux64.h"
1471         tmake_file="${tmake_file} mips/t-linux64"
1472         tm_defines="MIPS_ABI_DEFAULT=ABI_N32"
1473         gnu_ld=yes
1474         gas=yes
1475         ;;
1476 mips*-*-linux*)                         # Linux MIPS, either endian.
1477         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h"
1478         case ${target} in
1479         mipsisa32*-*)
1480                 target_cpu_default="MASK_SOFT_FLOAT"
1481                 tm_defines="MIPS_ISA_DEFAULT=32"
1482                 ;;
1483         esac
1484         ;;
1485 mips*-*-openbsd*)
1486         tm_defines="OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
1487         target_cpu_default="MASK_ABICALLS"
1488         tm_file="mips/mips.h openbsd.h mips/openbsd.h mips/sdb.h"
1489         case ${target} in
1490         mips*el-*-openbsd*)
1491             tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";;
1492         *)  tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";;
1493         esac
1494         ;;
1495 mipsisa32-*-elf* | mipsisa32el-*-elf*)
1496         tm_file="elfos.h ${tm_file} mips/elf.h"
1497         tmake_file=mips/t-isa3264
1498         tm_defines="MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_EABI"
1499         use_fixproto=yes
1500         ;;
1501 mipsisa32r2-*-elf* | mipsisa32r2el-*-elf*)
1502         tm_file="elfos.h ${tm_file} mips/elf.h"
1503         tmake_file=mips/t-isa3264
1504         tm_defines="MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_EABI"
1505         use_fixproto=yes
1506         ;;
1507 mipsisa64-*-elf* | mipsisa64el-*-elf*)
1508         tm_file="elfos.h ${tm_file} mips/elf.h"
1509         tmake_file=mips/t-isa3264
1510         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1511         tm_defines="MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_EABI"
1512         use_fixproto=yes
1513         ;;
1514 mipsisa64sr71k-*-elf*)
1515         tm_file="elfos.h ${tm_file} mips/elf.h"
1516         tmake_file=mips/t-sr71k
1517         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1518         tm_defines="MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
1519         use_fixproto=yes
1520         ;;
1521 mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
1522         tm_file="elfos.h ${tm_file} mips/elf.h"
1523         tmake_file=mips/t-elf
1524         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1525         tm_defines="MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
1526         use_fixproto=yes
1527         ;;
1528 mips-*-elf* | mipsel-*-elf*)
1529         tm_file="elfos.h ${tm_file} mips/elf.h"
1530         tmake_file=mips/t-elf
1531         use_fixproto=yes
1532         ;;
1533 mips64-*-elf* | mips64el-*-elf*)
1534         tm_file="elfos.h ${tm_file} mips/elf.h"
1535         tmake_file=mips/t-elf
1536         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1537         tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1538         use_fixproto=yes
1539         ;;
1540 mips64vr-*-elf* | mips64vrel-*-elf*)
1541         tm_file="mips/vr.h elfos.h ${tm_file} mips/elf.h"
1542         tmake_file=mips/t-vr
1543         use_fixproto=yes
1544         ;;
1545 mips64orion-*-elf* | mips64orionel-*-elf*)
1546         tm_file="elfos.h ${tm_file} mips/elforion.h mips/elf.h"
1547         tmake_file=mips/t-elf
1548         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1549         tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1550         use_fixproto=yes
1551         ;;
1552 mips*-*-rtems*)
1553         tm_file="elfos.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
1554         tmake_file="mips/t-elf t-rtems mips/t-rtems"
1555         ;;
1556 mips-wrs-vxworks)
1557         # We want vxworks.h after mips/elf.h, which unfortunately means we
1558         # have to redo the tm_file list from scratch.
1559         tm_file="elfos.h mips/mips.h svr4.h mips/elf.h vxworks.h mips/vxworks.h"
1560         tmake_file="${tmake_file} mips/t-vxworks"
1561         ;;
1562 mips-wrs-windiss)       # Instruction-level simulator for VxWorks.
1563         xm_defines=POSIX
1564         tm_file="elfos.h mips/mips.h svr4.h mips/elf.h windiss.h mips/windiss.h"
1565         tmake_file="${tmake_file} mips/t-elf"
1566         thread_file=
1567         ;;
1568 mipstx39-*-elf* | mipstx39el-*-elf*)
1569         tm_file="elfos.h ${tm_file} mips/r3900.h mips/elf.h"
1570         tmake_file=mips/t-r3900
1571         use_fixproto=yes
1572         ;;
1573 mmix-knuth-mmixware)
1574         need_64bit_hwint=yes
1575         ;;
1576 mn10300-*-*)
1577         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1578         if test x$stabs = xyes
1579         then
1580                 tm_file="${tm_file} dbx.h"
1581         fi
1582         use_collect2=no
1583         use_fixproto=yes
1584         ;;
1585 mt-*-elf)
1586         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1587         tmake_file="${tmake_file} mt/t-mt"
1588         ;;
1589 ns32k-*-netbsdelf*)
1590         echo "GCC does not yet support the ${target} target"; exit 1
1591         ;;
1592 ns32k-*-netbsd*)
1593         tm_file="${tm_file} netbsd.h netbsd-aout.h ns32k/netbsd.h"
1594         # On NetBSD, the headers are already okay, except for math.h.
1595         tmake_file="t-netbsd ns32k/t-ns32k"
1596         extra_parts=""
1597         use_collect2=yes
1598         ;;
1599 pdp11-*-bsd)
1600         tm_file="${tm_file} pdp11/2bsd.h"
1601         use_fixproto=yes
1602         ;;
1603 pdp11-*-*)
1604         use_fixproto=yes
1605         ;;
1606 # port not yet contributed
1607 #powerpc-*-openbsd*)
1608 #       tmake_file="${tmake_file} rs6000/t-fprules "
1609 #       extra_headers=
1610 #       ;;
1611 powerpc64-*-linux*)
1612         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1613         test x$with_cpu != x || cpu_is_64bit=yes
1614         test x$cpu_is_64bit != xyes || tm_file="${tm_file} rs6000/default64.h"
1615         tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
1616         if test x${enable_secureplt} = xyes; then
1617                 tm_file="rs6000/secureplt.h ${tm_file}"
1618         fi
1619         extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
1620         tmake_file="rs6000/t-fprules ${tmake_file} rs6000/t-ppccomm rs6000/t-linux64"
1621         ;;
1622 powerpc64-*-gnu*)
1623         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux64.h rs6000/gnu.h"
1624         extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
1625         tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-gnu rs6000/t-linux64"
1626         ;;
1627 powerpc-*-beos*)
1628         tm_file="${tm_file} rs6000/aix.h rs6000/beos.h rs6000/xcoff.h"
1629         tmake_file="rs6000/t-fprules rs6000/t-beos"
1630         extra_headers=
1631         use_fixproto=yes
1632         ;;
1633 powerpc-*-darwin*)
1634         extra_options="${extra_options} rs6000/darwin.opt"
1635         case ${target} in
1636           *-darwin1[0-9]* | *-darwin[8-9]*)
1637             tmake_file="${tmake_file} rs6000/t-darwin8"
1638             tm_file="${tm_file} rs6000/darwin8.h"
1639             ;;
1640           *-darwin7*)
1641             tm_file="${tm_file} rs6000/darwin7.h"
1642             ;;
1643           *-darwin[0-6]*)
1644             ;;
1645         esac
1646         extra_headers=altivec.h
1647         ;;
1648 powerpc*-*-freebsd*)
1649         tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
1650         tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1651         extra_options="${extra_options} rs6000/sysv4.opt"
1652         ;;
1653 powerpc-*-netbsd*)
1654         tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
1655         tmake_file="${tmake_file} rs6000/t-netbsd"
1656         extra_options="${extra_options} rs6000/sysv4.opt"
1657         ;;
1658 powerpc-*-chorusos*)
1659         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h chorus.h"
1660         tmake_file="rs6000/t-fprules rs6000/t-ppcos rs6000/t-ppccomm"
1661         extra_options="${extra_options} rs6000/sysv4.opt"
1662         case ${enable_threads} in
1663           yes | posix)
1664             thread_file='posix'
1665             ;;
1666         esac
1667         use_fixproto=yes
1668         ;;
1669 powerpc-*-eabispe*)
1670         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabispe.h"
1671         extra_options="${extra_options} rs6000/sysv4.opt"
1672         tmake_file="rs6000/t-spe rs6000/t-ppccomm"
1673         ;;
1674 powerpc-*-eabisimaltivec*)
1675         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h rs6000/eabialtivec.h"
1676         extra_options="${extra_options} rs6000/sysv4.opt"
1677         tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
1678         ;;
1679 powerpc-*-eabisim*)
1680         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h"
1681         extra_options="${extra_options} rs6000/sysv4.opt"
1682         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1683         ;;
1684 powerpc-*-elf*)
1685         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1686         extra_options="${extra_options} rs6000/sysv4.opt"
1687         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1688         use_fixproto=yes
1689         ;;
1690 powerpc-*-eabialtivec*)
1691         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabialtivec.h"
1692         extra_options="${extra_options} rs6000/sysv4.opt"
1693         tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
1694         ;;
1695 powerpc-*-eabi*)
1696         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h"
1697         extra_options="${extra_options} rs6000/sysv4.opt"
1698         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1699         ;;
1700 powerpc-*-rtems*)
1701         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/rtems.h rtems.h"
1702         extra_options="${extra_options} rs6000/sysv4.opt"
1703         tmake_file="rs6000/t-fprules rs6000/t-rtems t-rtems rs6000/t-ppccomm"
1704         ;;
1705 powerpc-*-linux*altivec*)
1706         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h"
1707         extra_options="${extra_options} rs6000/sysv4.opt"
1708         tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1709         ;;
1710 powerpc-*-linux*spe*)
1711         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxspe.h"
1712         extra_options="${extra_options} rs6000/sysv4.opt"
1713         tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1714         ;;
1715 powerpc-*-linux*)
1716         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1717         extra_options="${extra_options} rs6000/sysv4.opt"
1718         tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1719         case ${enable_targets}:${cpu_is_64bit} in
1720             *powerpc64* | all:* | *:yes)
1721                 if test x$cpu_is_64bit = xyes; then
1722                     tm_file="${tm_file} rs6000/default64.h"
1723                 fi
1724                 tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
1725                 tmake_file="$tmake_file rs6000/t-linux64"
1726                 extra_options="${extra_options} rs6000/linux64.opt"
1727                 ;;
1728             *)
1729                 tm_file="${tm_file} rs6000/linux.h"
1730                 ;;
1731         esac
1732         if test x${enable_secureplt} = xyes; then
1733                 tm_file="rs6000/secureplt.h ${tm_file}"
1734         fi
1735         ;;
1736 powerpc-*-gnu-gnualtivec*)
1737         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h"
1738         extra_options="${extra_options} rs6000/sysv4.opt"
1739         tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1740         if test x$enable_threads = xyes; then
1741                 thread_file='posix'
1742         fi
1743         ;;
1744 powerpc-*-gnu*)
1745         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h"
1746         tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1747         extra_options="${extra_options} rs6000/sysv4.opt"
1748         if test x$enable_threads = xyes; then
1749                 thread_file='posix'
1750         fi
1751         ;;
1752 powerpc-wrs-vxworks|powerpc-wrs-vxworksae)
1753         # We want vxworks.h after rs6000/sysv4.h, which unfortunately
1754         # means we have to redo the tm_file list from scratch.
1755         tm_file="rs6000/rs6000.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1756         tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-ppccomm rs6000/t-vxworks"
1757         extra_options="${extra_options} rs6000/sysv4.opt"
1758         extra_headers=ppc-asm.h
1759         case ${target} in
1760           *-vxworksae*)
1761             tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/vxworksae.h"
1762             tmake_file="${tmake_file} rs6000/t-vxworksae"
1763             ;;
1764           *-vxworks*)
1765             tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h"
1766             ;;
1767         esac
1768         ;;
1769 powerpc-wrs-windiss*)  # Instruction-level simulator for VxWorks.
1770         tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/windiss.h"
1771         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1772         extra_options="${extra_options} rs6000/sysv4.opt"
1773         thread_file=""
1774         use_fixproto=yes
1775         ;;
1776 powerpc-*-lynxos*)
1777         xm_defines=POSIX
1778         tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
1779         tmake_file="t-lynx rs6000/t-lynx"
1780         extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
1781         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1782         extra_options="${extra_options} lynx.opt"
1783         thread_file=lynx
1784         gnu_ld=yes
1785         gas=yes
1786         ;;
1787 powerpcle-*-sysv*)
1788         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
1789         tmake_file="rs6000/t-fprules rs6000/t-ppcos rs6000/t-ppccomm"
1790         extra_options="${extra_options} rs6000/sysv4.opt"
1791         use_fixproto=yes
1792         ;;
1793 powerpcle-*-elf*)
1794         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
1795         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1796         extra_options="${extra_options} rs6000/sysv4.opt"
1797         use_fixproto=yes
1798         ;;
1799 powerpcle-*-eabisim*)
1800         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/eabisim.h"
1801         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1802         extra_options="${extra_options} rs6000/sysv4.opt"
1803         ;;
1804 powerpcle-*-eabi*)
1805         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h"
1806         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1807         extra_options="${extra_options} rs6000/sysv4.opt"
1808         ;;
1809 powerpc-*-kaos*)
1810         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h kaos.h rs6000/kaos-ppc.h"
1811         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1812         extra_options="${extra_options} rs6000/sysv4.opt"
1813         ;;
1814 powerpcle-*-kaos*)
1815         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h kaos.h rs6000/kaos-ppc.h"
1816         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1817         extra_options="${extra_options} rs6000/sysv4.opt"
1818         ;;
1819 rs6000-ibm-aix4.[12]* | powerpc-ibm-aix4.[12]*)
1820         tm_file="${tm_file} rs6000/aix.h rs6000/aix41.h rs6000/xcoff.h"
1821         tmake_file="rs6000/t-fprules rs6000/t-newas"
1822         extra_options="${extra_options} rs6000/aix41.opt"
1823         use_collect2=yes
1824         extra_headers=
1825         use_fixproto=yes
1826         ;;
1827 rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
1828         tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h"
1829         tmake_file=rs6000/t-aix43
1830         extra_options="${extra_options} rs6000/aix64.opt"
1831         use_collect2=yes
1832         thread_file='aix'
1833         extra_headers=
1834         ;;
1835 rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
1836         tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h"
1837         extra_options="${extra_options} rs6000/aix64.opt"
1838         tmake_file=rs6000/t-aix43
1839         use_collect2=yes
1840         thread_file='aix'
1841         extra_headers=
1842         ;;
1843 rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*)
1844         tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h"
1845         tmake_file=rs6000/t-aix52
1846         extra_options="${extra_options} rs6000/aix64.opt"
1847         use_collect2=yes
1848         thread_file='aix'
1849         extra_headers=
1850         ;;
1851 s390-*-linux*)
1852         tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
1853         tmake_file="${tmake_file} s390/t-crtstuff"
1854         ;;
1855 s390x-*-linux*)
1856         tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
1857         tm_p_file=s390/s390-protos.h
1858         md_file=s390/s390.md
1859         extra_modes=s390/s390-modes.def
1860         out_file=s390/s390.c
1861         tmake_file="${tmake_file} s390/t-crtstuff s390/t-linux64"
1862         ;;
1863 s390x-ibm-tpf*)
1864         tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h s390/tpf.h"
1865         tm_p_file=s390/s390-protos.h
1866         md_file=s390/s390.md
1867         extra_modes=s390/s390-modes.def
1868         out_file=s390/s390.c
1869         extra_parts="crtbeginS.o crtendS.o"
1870         tmake_file="s390/t-crtstuff s390/t-tpf"
1871         thread_file='tpf'
1872         extra_options="${extra_options} s390/tpf.opt"
1873         ;;
1874 sh-*-elf* | sh[12346l]*-*-elf* | sh*-*-kaos* | \
1875 sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \
1876   sh-*-linux* | sh[346lbe]*-*-linux* | \
1877   sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
1878    sh64-*-netbsd* | sh64l*-*-netbsd*)
1879         tmake_file="${tmake_file} sh/t-sh sh/t-elf"
1880         if test x${with_endian} = x; then
1881                 case ${target} in
1882                 sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;;
1883                 shbe-*-* | sheb-*-*)               with_endian=big,little ;;
1884                 sh[1234]l* | sh[34]*-*-linux*)     with_endian=little ;;
1885                 shl* | sh64l* | sh*-*-linux* | \
1886                   sh5l* | sh-superh-elf)           with_endian=little,big ;;
1887                 sh[1234]*-*-*)                     with_endian=big ;;
1888                 *)                                 with_endian=big,little ;;
1889                 esac
1890         fi
1891         case ${with_endian} in
1892         big|little)     tmake_file="${tmake_file} sh/t-1e" ;;
1893         big,little|little,big) ;;
1894         *)      echo "with_endian=${with_endian} not supported."; exit 1 ;;
1895         esac
1896         case ${with_endian} in
1897         little*)        tm_file="sh/little.h ${tm_file}" ;;
1898         esac
1899         tm_file="${tm_file} dbxelf.h elfos.h"
1900         case ${target} in
1901         sh*-*-netbsd*)  ;;
1902         *)              tm_file="${tm_file} svr4.h" ;;
1903         esac
1904         tm_file="${tm_file} sh/elf.h"
1905         case ${target} in
1906         sh*-*-linux*)   tmake_file="${tmake_file} sh/t-linux"
1907                         tm_file="${tm_file} linux.h sh/linux.h" ;;
1908         sh*-*-kaos*)    tm_file="${tm_file} sh/embed-elf.h kaos.h sh/kaos-sh.h"
1909                         ;;
1910         sh*-*-netbsd*)  tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h" ;;
1911         *)              tm_file="${tm_file} sh/embed-elf.h" ;;
1912         esac
1913         case ${target} in
1914         sh5*-*-netbsd*)
1915                 # SHmedia, 32-bit ABI
1916                 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd"
1917                 ;;
1918         sh64*-netbsd*)
1919                 # SHmedia, 64-bit ABI
1920                 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd sh/t-netbsd-sh5-64"
1921                 ;;
1922         *-*-netbsd)
1923                 tmake_file="${tmake_file} sh/t-netbsd"
1924                 ;;
1925         sh64*-*-linux*)
1926                 tmake_file="${tmake_file} sh/t-sh64 sh/t-linux64"
1927                 tm_file="${tm_file} sh/sh64.h"
1928                 extra_headers="shmedia.h ushmedia.h sshmedia.h"
1929                 ;;
1930         sh64*)
1931                 tmake_file="${tmake_file} sh/t-sh64"
1932                 tm_file="${tm_file} sh/sh64.h"
1933                 extra_headers="shmedia.h ushmedia.h sshmedia.h"
1934                 ;;
1935         *-*-symbianelf*)
1936                 tmake_file="sh/t-symbian"
1937                 tm_file="sh/symbian-pre.h sh/little.h ${tm_file} sh/symbian-post.h"
1938                 extra_objs="symbian.o"
1939                 extra_parts="crt1.o crti.o crtn.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
1940                 ;;
1941         esac
1942         # sed el/eb endian suffixes away to avoid confusion with sh[23]e
1943         case `echo ${target} | sed 's/e[lb]-/-/'` in
1944         sh64*-*-netbsd*)        sh_cpu_target=sh5-64media ;;
1945         sh64* | sh5*-*-netbsd*) sh_cpu_target=sh5-32media ;;
1946         sh4a_single_only*)      sh_cpu_target=sh4a-single-only ;;
1947         sh4a_single*)           sh_cpu_target=sh4a-single ;;
1948         sh4a_nofpu*)            sh_cpu_target=sh4a-nofpu ;;
1949         sh4al)                  sh_cpu_target=sh4al ;;
1950         sh4a*)                  sh_cpu_target=sh4a ;;
1951         sh4_single_only*)       sh_cpu_target=sh4-single-only ;;
1952         sh4_single*)            sh_cpu_target=sh4-single ;;
1953         sh4_nofpu*)             sh_cpu_target=sh4-nofpu ;;
1954         sh4* | sh-superh-*)     sh_cpu_target=sh4 ;;
1955         sh3e*)                  sh_cpu_target=sh3e ;;
1956         sh*-*-netbsd* | sh3*)   sh_cpu_target=sh3 ;;
1957         sh2a_single_only*)      sh_cpu_target=sh2a-single-only ;;
1958         sh2a_single*)           sh_cpu_target=sh2a-single ;;
1959         sh2a_nofpu*)            sh_cpu_target=sh2a-nofpu ;;
1960         sh2a*)                  sh_cpu_target=sh2a ;;
1961         sh2e*)                  sh_cpu_target=sh2e ;;
1962         sh2*)                   sh_cpu_target=sh2 ;;
1963         *)                      sh_cpu_target=sh1 ;;
1964         esac
1965         sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`"
1966         case $sh_cpu_default in
1967         sh5-64media-nofpu | sh5-64media | \
1968           sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \
1969           sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
1970           sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
1971           sh4-single-only | sh4-single | sh4-nofpu | sh4 | \
1972           sh3e | sh3 | sh2e | sh2 | sh1) ;;
1973         "")     sh_cpu_default=${sh_cpu_target} ;;
1974         *)      echo "with_cpu=$with_cpu not supported"; exit 1 ;;
1975         esac
1976         sh_multilibs=${with_multilib_list}
1977         if test x${sh_multilibs} = x ; then
1978                 case ${target} in
1979                 sh[1234]*)      sh_multilibs=${sh_cpu_target} ;;
1980                 sh64* | sh5*)   sh_multilibs=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu ;;
1981                 sh-superh-*)    sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;;
1982                 sh*-*-linux*)   sh_multilibs=m1,m3e,m4 ;;
1983                 sh*-*-netbsd*)  sh_multilibs=m3,m3e,m4 ;;
1984                 *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;;
1985                 esac
1986         fi
1987         target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr a-z- A-Z_`
1988         tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"'
1989         sh_multilibs=`echo $sh_multilibs,$sh_cpu_default | sed -e 's/[  ,/][    ,]*/ /g' -e 's/ $//' -e s/^m/sh/ -e 's/ m/ sh/g' | tr A-Z_ a-z-`
1990         for sh_multilib in ${sh_multilibs}; do
1991                 case ${sh_multilib} in
1992                 sh1 | sh2 | sh2e | sh3 | sh3e | \
1993                 sh4 | sh4-single | sh4-single-only | sh4-nofpu | \
1994                 sh4a | sh4a-single | sh4a-single-only | sh4a-nofpu | sh4al | \
1995                 sh2a | sh2a-single | sh2a-single-only | sh2a-nofpu | \
1996                 sh5-64media | sh5-64media-nofpu | \
1997                 sh5-32media | sh5-32media-nofpu | \
1998                 sh5-compact | sh5-compact-nofpu)
1999                         tmake_file="${tmake_file} sh/t-mlib-${sh_multilib}"
2000                         tm_defines="$tm_defines SUPPORT_`echo $sh_multilib|tr a-z- A-Z_`=1"
2001                         ;;
2002                 *)
2003                         echo "with_multilib_list=${sh_multilib} not supported."
2004                         exit 1
2005                         ;;
2006                 esac
2007         done
2008         if test x${enable_incomplete_targets} == xyes ; then
2009                 tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1"
2010         fi
2011         use_fixproto=yes
2012         ;;
2013 sh-*-rtemscoff*)
2014         tmake_file="sh/t-sh t-rtems sh/t-rtems"
2015         tm_file="${tm_file} dbxcoff.h sh/coff.h sh/rtems.h rtems.h"
2016         ;;
2017 sh-*-rtems*)
2018         tmake_file="sh/t-sh sh/t-elf t-rtems sh/t-rtems"
2019         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h"
2020         ;;
2021 sh-wrs-vxworks)
2022         tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks"
2023         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/embed-elf.h sh/vxworks.h"
2024         ;;
2025 sh-*-*)
2026         tm_file="${tm_file} dbxcoff.h sh/coff.h"
2027         use_fixproto=yes
2028         ;;
2029 sparc-*-netbsdelf*)
2030         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2031         extra_options="${extra_options} sparc/long-double-switch.opt"
2032         ;;
2033 sparc64-*-openbsd*)
2034         tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h"
2035         extra_options="${extra_options} sparc/little-endian.opt"
2036         gas=yes gnu_ld=yes
2037         with_cpu=ultrasparc
2038         ;;
2039 sparc-*-elf*)
2040         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h"
2041         tmake_file="sparc/t-elf sparc/t-crtfm"
2042         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2043         use_fixproto=yes
2044         ;;
2045 sparc-*-linux*)         # SPARC's running GNU/Linux, libc6
2046         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h"
2047         extra_options="${extra_options} sparc/long-double-switch.opt"
2048         tmake_file="${tmake_file} sparc/t-crtfm"
2049         ;;
2050 sparc-*-rtems*)
2051         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h"
2052         tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
2053         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2054         ;;
2055 sparc64-*-solaris2* | sparcv9-*-solaris2*)
2056         tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h"
2057         if test x$gnu_ld = xyes; then
2058                 tm_file="${tm_file} sparc/sol2-gld.h sparc/sol2-gld-bi.h"
2059         fi
2060         if test x$gas = xyes; then
2061                 tm_file="${tm_file} sparc/sol2-gas.h sparc/sol2-gas-bi.h"
2062         fi
2063         tm_file="${tm_file} tm-dwarf2.h"
2064         tmake_file="t-sol2 sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm"
2065         if test x$gnu_ld = xyes; then
2066                 tmake_file="$tmake_file t-slibgcc-elf-ver"
2067         else
2068                 tmake_file="$tmake_file t-slibgcc-sld"
2069         fi
2070         c_target_objs="sol2-c.o"
2071         cxx_target_objs="sol2-c.o"
2072         extra_objs="sol2.o"
2073         tm_p_file="${tm_p_file} sol2-protos.h"
2074         extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o"
2075         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2076           "":yes:* | yes:yes:* ) thread_file=posix ;;
2077           "":*:yes | yes:*:yes ) thread_file=solaris ;;
2078         esac
2079         need_64bit_hwint=yes
2080         ;;
2081 sparc-*-solaris2*)
2082         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
2083         case ${target} in
2084         *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2085                 tm_file="${tm_file} sol26.h"
2086         esac
2087         tm_file="${tm_file} sparc/sol2.h"
2088         if test x$gnu_ld = xyes; then
2089                 tm_file="${tm_file} sparc/sol2-gld.h"
2090         fi
2091         if test x$gas = xyes; then
2092                 tm_file="${tm_file} sparc/sol2-gas.h"
2093         fi
2094         tmake_file="t-sol2 sparc/t-sol2 sparc/t-crtfm"
2095         if test x$gnu_ld = xyes; then
2096                 tmake_file="$tmake_file t-slibgcc-elf-ver"
2097         else
2098                 tmake_file="$tmake_file t-slibgcc-sld"
2099         fi
2100         case ${target} in
2101         *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2102                 if test x$gnu_ld = xno; then
2103                         tm_file="${tm_file} sparc/sol26-sld.h"
2104                 fi
2105                 ;;
2106         *-*-solaris2.[789] | *-*-solaris2.1[0-9]*)
2107                 tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h"
2108                 if test x$gnu_ld = xyes; then
2109                         tm_file="${tm_file} sparc/sol2-gld-bi.h"
2110                 fi
2111                 if test x$gas = xyes; then
2112                         tm_file="${tm_file} sparc/sol2-gas-bi.h"
2113                 fi
2114                 tm_file="${tm_file} tm-dwarf2.h"
2115                 tmake_file="$tmake_file sparc/t-sol2-64"
2116                 need_64bit_hwint=yes
2117                 ;;
2118         esac
2119         c_target_objs="sol2-c.o"
2120         cxx_target_objs="sol2-c.o"
2121         extra_objs="sol2.o"
2122         tm_p_file="${tm_p_file} sol2-protos.h"
2123         extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
2124         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2125           "":yes:* | yes:yes:* )
2126                 case ${target} in
2127                   *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2128                         thread_file=posix95
2129                         ;;
2130                   *)
2131                         thread_file=posix
2132                         ;;
2133                 esac
2134                 ;;
2135           "":*:yes | yes:*:yes )
2136                 thread_file=solaris
2137                 ;;
2138         esac
2139         ;;
2140 sparc-*-sysv4*)
2141         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sysv4-only.h"
2142         tmake_file=t-svr4
2143         extra_parts="crtbegin.o crtend.o"
2144         use_fixproto=yes
2145         ;;
2146 sparc64-*-elf*)
2147         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h"
2148         extra_options="${extra_options} sparc/little-endian.opt"
2149         tmake_file="${tmake_file} sparc/t-crtfm"
2150         extra_parts="crtbegin.o crtend.o"
2151         use_fixproto=yes
2152         ;;
2153 sparc64-*-freebsd*|ultrasparc-*-freebsd*)
2154         tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
2155         extra_options="${extra_options} sparc/long-double-switch.opt"
2156         tmake_file="${tmake_file} sparc/t-crtfm"
2157         case "x$with_cpu" in
2158                 xultrasparc) ;;
2159                 x) with_cpu=ultrasparc ;;
2160                 *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
2161         esac
2162         need_64bit_hwint=yes
2163         ;;
2164 sparc64-*-linux*)               # 64-bit SPARC's running GNU/Linux
2165         tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux64.h"
2166         extra_options="${extra_options} sparc/long-double-switch.opt"
2167         tmake_file="${tmake_file} sparc/t-linux64 sparc/t-crtfm"
2168         ;;
2169 sparc64-*-netbsd*)
2170         tm_file="sparc/biarch64.h ${tm_file}"
2171         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2172         extra_options="${extra_options} sparc/long-double-switch.opt"
2173         tmake_file="${tmake_file} sparc/t-netbsd64"
2174         ;;
2175 strongarm-*-elf*)
2176         tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
2177         tmake_file="arm/t-arm arm/t-strongarm-elf"
2178         out_file=arm/arm.c
2179         md_file=arm/arm.md
2180         extra_modes=arm/arm-modes.def
2181         use_fixproto=yes
2182         ;;
2183 strongarm-*-pe)
2184         tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/strongarm-coff.h arm/arm.h arm/pe.h arm/strongarm-pe.h"
2185         tmake_file="arm/t-arm arm/t-strongarm-pe"
2186         out_file=arm/arm.c
2187         md_file=arm/arm.md
2188         extra_modes=arm/arm-modes.def
2189         extra_options="${extra_options} arm/pe.opt"
2190         extra_objs=pe.o
2191         use_fixproto=yes
2192         ;;
2193 strongarm-*-kaos*)
2194         tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-strongarm.h"
2195         tmake_file="arm/t-arm arm/t-strongarm-elf"
2196         out_file=arm/arm.c
2197         md_file=arm/arm.md
2198         extra_modes=arm/arm-modes.def
2199         ;;
2200 v850e1-*-*)
2201         target_cpu_default="TARGET_CPU_v850e1"
2202         tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
2203         tm_p_file=v850/v850-protos.h
2204         tmake_file=v850/t-v850e
2205         md_file=v850/v850.md
2206         out_file=v850/v850.c
2207         extra_options="${extra_options} v850/v850.opt"
2208         if test x$stabs = xyes
2209         then
2210                 tm_file="${tm_file} dbx.h"
2211         fi
2212         use_collect2=no
2213         c_target_objs="v850-c.o"
2214         cxx_target_objs="v850-c.o"
2215         use_fixproto=yes
2216         ;;
2217 v850e-*-*)
2218         target_cpu_default="TARGET_CPU_v850e"
2219         tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
2220         tm_p_file=v850/v850-protos.h
2221         tmake_file=v850/t-v850e
2222         md_file=v850/v850.md
2223         out_file=v850/v850.c
2224         extra_options="${extra_options} v850/v850.opt"
2225         if test x$stabs = xyes
2226         then
2227                 tm_file="${tm_file} dbx.h"
2228         fi
2229         use_collect2=no
2230         c_target_objs="v850-c.o"
2231         cxx_target_objs="v850-c.o"
2232         use_fixproto=yes
2233         ;;
2234 v850-*-*)
2235         target_cpu_default="TARGET_CPU_generic"
2236         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
2237         tmake_file=v850/t-v850
2238         if test x$stabs = xyes
2239         then
2240                 tm_file="${tm_file} dbx.h"
2241         fi
2242         use_collect2=no
2243         c_target_objs="v850-c.o"
2244         cxx_target_objs="v850-c.o"
2245         use_fixproto=yes
2246         ;;
2247 vax-*-bsd*)                     # VAXen running BSD
2248         tm_file="${tm_file} vax/bsd.h"
2249         tmake_file=vax/t-memfuncs
2250         use_collect2=yes
2251         use_fixproto=yes
2252         ;;
2253 vax-*-sysv*)                    # VAXen running system V
2254         tm_file="${tm_file} vax/vaxv.h"
2255         tmake_file=vax/t-memfuncs
2256         use_fixproto=yes
2257         ;;
2258 vax-*-netbsdelf*)
2259         tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
2260         ;;
2261 vax-*-netbsd*)
2262         tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h"
2263         tmake_file=t-netbsd
2264         extra_parts=""
2265         use_collect2=yes
2266         ;;
2267 vax-*-openbsd*)
2268         tm_file="vax/vax.h vax/openbsd1.h openbsd.h vax/openbsd.h"
2269         use_collect2=yes
2270         ;;
2271 vax-*-ultrix*)                  # VAXen running ultrix
2272         tm_file="${tm_file} vax/ultrix.h"
2273         tmake_file=vax/t-memfuncs
2274         use_fixproto=yes
2275         ;;
2276 xscale-*-elf)
2277         tm_file="arm/xscale-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
2278         tmake_file="arm/t-arm arm/t-xscale-elf"
2279         out_file=arm/arm.c
2280         md_file=arm/arm.md
2281         extra_modes=arm/arm-modes.def
2282         use_fixproto=yes
2283         ;;
2284 xscale-*-coff)
2285         tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/xscale-coff.h arm/arm.h"
2286         tmake_file="arm/t-arm arm/t-xscale-coff"
2287         out_file=arm/arm.c
2288         md_file=arm/arm.md
2289         extra_modes=arm/arm-modes.def
2290         use_fixproto=yes
2291         ;;
2292 xstormy16-*-elf)
2293         # For historical reasons, the target files omit the 'x'.
2294         tm_file="dbxelf.h elfos.h svr4.h stormy16/stormy16.h"
2295         tm_p_file=stormy16/stormy16-protos.h
2296         md_file=stormy16/stormy16.md
2297         out_file=stormy16/stormy16.c
2298         extra_options=stormy16/stormy16.opt
2299         tmake_file="stormy16/t-stormy16"
2300         extra_parts="crtbegin.o crtend.o"
2301         use_fixproto=yes
2302         ;;
2303 xtensa-*-elf*)
2304         tm_file="${tm_file} dbxelf.h elfos.h svr4.h xtensa/elf.h"
2305         tmake_file="xtensa/t-xtensa xtensa/t-elf"
2306         ;;
2307 xtensa-*-linux*)
2308         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h xtensa/linux.h"
2309         tmake_file="${tmake_file} xtensa/t-xtensa xtensa/t-linux"
2310         ;;
2311 am33_2.0-*-linux*)
2312         tm_file="mn10300/mn10300.h dbxelf.h elfos.h linux.h mn10300/linux.h"
2313         tmake_file="${tmake_file} mn10300/t-linux"
2314         gas=yes gnu_ld=yes
2315         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
2316         use_collect2=no
2317         ;;
2318 m32c-*-elf*)
2319         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
2320         c_target_objs="m32c-pragma.o"
2321         cxx_target_objs="m32c-pragma.o"
2322         use_fixproto=yes
2323         ;;
2324 *)
2325         echo "*** Configuration ${target} not supported" 1>&2
2326         exit 1
2327         ;;
2328 esac
2329
2330 case ${target} in
2331 i[34567]86-*-linux*aout* | i[34567]86-*-linux*libc1)
2332         tmake_file="${tmake_file} i386/t-gmm_malloc"
2333         ;;
2334 i[34567]86-*-linux* | x86_64-*-linux*)
2335         tmake_file="${tmake_file} i386/t-pmm_malloc"
2336         ;;
2337 i[34567]86-*-* | x86_64-*-*)
2338         tmake_file="${tmake_file} i386/t-gmm_malloc"
2339         ;;
2340 esac
2341
2342 # Support for --with-cpu and related options (and a few unrelated options,
2343 # too).
2344 case ${with_cpu} in
2345   yes | no)
2346     echo "--with-cpu must be passed a value" 1>&2
2347     exit 1
2348     ;;
2349 esac
2350
2351 # If there is no $with_cpu option, try to infer one from ${target}.
2352 # This block sets nothing except for with_cpu.
2353 if test x$with_cpu = x ; then
2354   case ${target} in
2355     ep9312-*-*)
2356       # A Cirrus ARM variant.
2357       with_cpu="ep9312"
2358       ;;
2359     i486-*-*)
2360       with_cpu=i486
2361       ;;
2362     i586-*-*)
2363       case ${target_noncanonical} in
2364         k6_2-*)
2365           with_cpu=k6-2
2366           ;;
2367         k6_3-*)
2368           with_cpu=k6-3
2369           ;;
2370         k6-*)
2371           with_cpu=k6
2372           ;;
2373         pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
2374           with_cpu=pentium-mmx
2375           ;;
2376         *)
2377           with_cpu=pentium
2378           ;;
2379       esac
2380       ;;
2381     i686-*-* | i786-*-*)
2382       case ${target_noncanonical} in
2383         k8-*|opteron-*|athlon_64-*)
2384           with_cpu=k8
2385           ;;
2386         athlon_xp-*|athlon_mp-*|athlon_4-*)
2387           with_cpu=athlon-4
2388           ;;
2389         athlon_tbird-*|athlon-*)
2390           with_cpu=athlon
2391           ;;
2392         pentium2-*)
2393           with_cpu=pentium2
2394           ;;
2395         pentium3-*|pentium3m-*)
2396           with_cpu=pentium3
2397           ;;
2398         pentium4-*|pentium4m-*)
2399           with_cpu=pentium4
2400           ;;
2401         prescott-*)
2402           with_cpu=prescott
2403           ;;
2404         nocona-*)
2405           with_cpu=nocona
2406           ;;
2407         pentium_m-*)
2408           with_cpu=pentium-m
2409           ;;
2410         *)
2411           with_cpu=pentiumpro
2412           ;;
2413       esac
2414       ;;
2415     x86_64-*-*)
2416       with_cpu=k8
2417       ;;
2418     alphaev6[78]*-*-*)
2419       with_cpu=ev67
2420       ;;
2421     alphaev6*-*-*)
2422       with_cpu=ev6
2423       ;;
2424     alphapca56*-*-*)
2425       with_cpu=pca56
2426       ;;
2427     alphaev56*-*-*)
2428       with_cpu=ev56
2429       ;;
2430     alphaev5*-*-*)
2431       with_cpu=ev5
2432       ;;
2433     frv-*-*linux* | frv400-*-*linux*)
2434       with_cpu=fr400
2435       ;;
2436     frv550-*-*linux*)
2437       with_cpu=fr550
2438       ;;
2439     sparc*-*-*)
2440       with_cpu="`echo ${target} | sed 's/-.*$//'`"
2441       if [ x$with_cpu = xsparc64 ]; then
2442         with_cpu=v9
2443       fi
2444       ;;
2445   esac
2446 fi
2447
2448 # Similarly for --with-float
2449 if test x$with_float = x; then
2450         case ${target} in
2451         ep9312-*-*)
2452                 with_float=hard
2453                 ;;
2454         esac
2455 fi
2456
2457 # Similarly for --with-schedule.
2458 if test x$with_schedule = x; then
2459         case ${target} in
2460         hppa1* | parisc1*)
2461                 # Override default PA8000 scheduling model.
2462                 with_schedule=7100LC
2463                 ;;
2464         esac
2465 fi
2466
2467 # Validate and mark as valid any --with options supported
2468 # by this target.  In order to use a particular --with option
2469 # you must list it in supported_defaults; validating the value
2470 # is optional.  This case statement should set nothing besides
2471 # supported_defaults.
2472
2473 supported_defaults=
2474 case "${target}" in
2475         alpha*-*-*)
2476                 supported_defaults="cpu tune"
2477                 for which in cpu tune; do
2478                         eval "val=\$with_$which"
2479                         case "$val" in
2480                         "" \
2481                         | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \
2482                         | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \
2483                         | 21264a)
2484                                 ;;
2485                         *)
2486                                 echo "Unknown CPU used in --with-$which=$val" 1>&2
2487                                 exit 1
2488                                 ;;
2489                         esac
2490                 done
2491                 ;;
2492
2493         arm*-*-*)
2494                 supported_defaults="arch cpu float tune fpu abi"
2495                 for which in cpu tune; do
2496                         # See if it matches any of the entries in arm-cores.def
2497                         eval "val=\$with_$which"
2498                         if [ x"$val" = x ] \
2499                             || grep "^ARM_CORE(\"$val\"," \
2500                                     ${srcdir}/config/arm/arm-cores.def \
2501                                     > /dev/null; then
2502                           # Ok
2503                           new_val=`grep "^ARM_CORE(\"$val\"," \
2504                                 ${srcdir}/config/arm/arm-cores.def | \
2505                                 sed -e 's/^[^,]*,[      ]*//' | \
2506                                 sed -e 's/,.*$//'`
2507                           eval "target_${which}_cname=$new_val"
2508                         echo "For $val real value is $new_val"
2509                           true
2510                         else
2511                           echo "Unknown CPU used in --with-$which=$val" 1>&2
2512                           exit 1
2513                         fi
2514                 done
2515
2516                 case "$with_arch" in
2517                 "" \
2518                 | armv[23456] | armv2a | armv3m | armv4t | armv5t \
2519                 | armv5te | armv6j |armv6k | armv6z | armv6zk \
2520                 | iwmmxt | ep9312)
2521                         # OK
2522                         ;;
2523                 *)
2524                         echo "Unknown arch used in --with-arch=$with_arch" 1>&2
2525                         exit 1
2526                         ;;
2527                 esac
2528
2529                 case "$with_float" in
2530                 "" \
2531                 | soft | hard | softfp)
2532                         # OK
2533                         ;;
2534                 *)
2535                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2536                         exit 1
2537                         ;;
2538                 esac
2539
2540                 case "$with_fpu" in
2541                 "" \
2542                 | fpa | fpe2 | fpe3 | maverick | vfp )
2543                         # OK
2544                         ;;
2545                 *)
2546                         echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1
2547                         exit 1
2548                         ;;
2549                 esac
2550
2551                 case "$with_abi" in
2552                 "" \
2553                 | apcs-gnu | atpcs | aapcs | iwmmxt )
2554                         #OK
2555                         ;;
2556                 *)
2557                         echo "Unknown ABI used in --with-abi=$with_abi"
2558                         exit 1
2559                         ;;
2560                 esac
2561
2562                 if test "x$with_arch" != x && test "x$with_cpu" != x; then
2563                         echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2
2564                 fi
2565                 ;;
2566
2567         fr*-*-*linux*)
2568                 supported_defaults=cpu
2569                 case "$with_cpu" in
2570                 fr400) ;;
2571                 fr550) ;;
2572                 *)
2573                         echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
2574                         exit 1
2575                         ;;
2576                 esac
2577                 ;;
2578
2579         m68k*-linux*)
2580                 supported_defaults="cpu"
2581                 case "$with_cpu" in
2582                 "" | "m68020" | "m68030" | "m68040" | "m68060" | "m68020-40" | "m68020-60")
2583                         # OK
2584                         ;;
2585                 *)
2586                         echo "Unknown CPU used in --with-cpu=$with_cpu, known values:"  1>&2
2587                         echo "m68020 m68030 m68040 m68060 m68020-40 m68020-60" 1>&2
2588                         exit 1
2589                         ;;
2590                 esac
2591                 ;;
2592
2593         hppa*-*-* | parisc*-*-*)
2594                 supported_defaults="arch schedule"
2595
2596                 case "$with_arch" in
2597                 "" | 1.0 | 1.1 | 2.0)
2598                         # OK
2599                         ;;
2600                 *)
2601                         echo "Unknown architecture used in --with-arch=$with_arch" 1>&2
2602                         exit 1
2603                         ;;
2604                 esac
2605
2606                 case "$with_schedule" in
2607                 "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000)
2608                         # OK
2609                         ;;
2610                 *)
2611                         echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2
2612                         exit 1
2613                         ;;
2614                 esac
2615                 ;;
2616
2617         i[34567]86-*-* | x86_64-*-*)
2618                 supported_defaults="arch cpu tune"
2619                 for which in arch cpu tune; do
2620                         eval "val=\$with_$which"
2621                         case ${val} in
2622                         "" | i386 | i486 \
2623                         | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \
2624                         | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
2625                         | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
2626                         | athlon-4 | athlon-xp | athlon-mp | k8 | opteron \
2627                         | athlon64 | athlon-fx | prescott | pentium-m \
2628                         | pentium4m | pentium3m| nocona)
2629                                 # OK
2630                                 ;;
2631                         *)
2632                                 echo "Unknown CPU given in --with-$which=$val." 1>&2
2633                                 exit 1
2634                                 ;;
2635                         esac
2636                 done
2637                 ;;
2638
2639         mips*-*-*)
2640                 supported_defaults="abi arch float tune divide"
2641
2642                 case ${with_float} in
2643                 "" | soft | hard)
2644                         # OK
2645                         ;;
2646                 *)
2647                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2648                         exit 1
2649                         ;;
2650                 esac
2651
2652                 case ${with_abi} in
2653                 "" | 32 | o64 | n32 | 64 | eabi)
2654                         # OK
2655                         ;;
2656                 *)
2657                         echo "Unknown ABI used in --with-abi=$with_abi" 1>&2
2658                         exit 1
2659                         ;;
2660                 esac
2661
2662                 case ${with_divide} in
2663                 "" | breaks | traps)
2664                         # OK
2665                         ;;
2666                 *)
2667                         echo "Unknown division check type use in --with-divide=$with_divide" 1>&2
2668                         exit 1
2669                 esac
2670                 ;;
2671
2672         powerpc*-*-* | rs6000-*-*)
2673                 supported_defaults="cpu float tune"
2674
2675                 for which in cpu tune; do
2676                         eval "val=\$with_$which"
2677                         case ${val} in
2678                         default32 | default64)
2679                                 with_which="with_$which"
2680                                 eval $with_which=
2681                                 ;;
2682                         405cr)
2683                                 tm_defines="${tm_defines} CONFIG_PPC405CR"
2684                                 eval "with_$which=405"
2685                                 ;;
2686                         "" | common \
2687                         | power | power[2345] | powerpc | powerpc64 \
2688                         | rios | rios1 | rios2 | rsc | rsc1 | rs64a \
2689                         | 401 | 403 | 405 | 405fp | 440 | 440fp | 505 \
2690                         | 601 | 602 | 603 | 603e | ec603e | 604 \
2691                         | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
2692                         | 854[08] | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5)
2693                                 # OK
2694                                 ;;
2695                         *)
2696                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
2697                                 exit 1
2698                                 ;;
2699                         esac
2700                 done
2701                 ;;
2702
2703         s390*-*-*)
2704                 supported_defaults="arch mode tune"
2705
2706                 for which in arch tune; do
2707                         eval "val=\$with_$which"
2708                         case ${val} in
2709                         "" | g5 | g6 | z900 | z990 | z9-109)
2710                                 # OK
2711                                 ;;
2712                         *)
2713                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
2714                                 exit 1
2715                                 ;;
2716                         esac
2717                 done
2718
2719                 case ${with_mode} in
2720                 "" | esa | zarch)
2721                         # OK
2722                         ;;
2723                 *)
2724                         echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2
2725                         exit 1
2726                         ;;
2727                 esac
2728                 ;;
2729
2730         sh[123456ble]-*-* | sh-*-*)
2731                 supported_defaults="cpu"
2732                 case "`echo $with_cpu | tr A-Z_ a-z- | sed s/sh/m/`" in
2733                 "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu )
2734                         # OK
2735                         ;;
2736                 m2a | m2a-single | m2a-single-only | m2a-nofpu)
2737                         ;;
2738                 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al)
2739                         ;;
2740                 *)
2741                         echo "Unknown CPU used in --with-cpu=$with_cpu, known values:"  1>&2
2742                         echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2
2743                         echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2
2744                         echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2
2745                         exit 1
2746                         ;;
2747                 esac
2748                 ;;
2749         sparc*-*-*)
2750                 supported_defaults="cpu float tune"
2751
2752                 for which in cpu tune; do
2753                         eval "val=\$with_$which"
2754                         case ${val} in
2755                         "" | sparc | sparcv9 | sparc64 | sparc86x \
2756                         | v7 | cypress | v8 | supersparc | sparclite | f930 \
2757                         | f934 | hypersparc | sparclite86x | sparclet | tsc701 \
2758                         | v9 | ultrasparc | ultrasparc3)
2759                                 # OK
2760                                 ;;
2761                         *)
2762                                 echo "Unknown cpu used in --with-$which=$val" 1>&2
2763                                 exit 1
2764                                 ;;
2765                         esac
2766                 done
2767
2768                 case ${with_float} in
2769                 "" | soft | hard)
2770                         # OK
2771                         ;;
2772                 *)
2773                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2774                         exit 1
2775                         ;;
2776                 esac
2777                 ;;
2778
2779         v850*-*-*)
2780                 supported_defaults=cpu
2781                 case ${with_cpu} in
2782                 "" | v850e | v850e1)
2783                         # OK
2784                         ;;
2785                 *)
2786                         echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
2787                         exit 1
2788                         ;;
2789                 esac
2790                 ;;
2791 esac
2792
2793 # Set some miscellaneous flags for particular targets.
2794 target_cpu_default2=
2795 case ${target} in
2796         alpha*-*-*)
2797                 if test x$gas = xyes
2798                 then
2799                         target_cpu_default2="MASK_GAS"
2800                 fi
2801                 ;;
2802
2803         arm*-*-*)
2804                 if test x$target_cpu_cname = x
2805                 then
2806                         target_cpu_default2=TARGET_CPU_generic
2807                 else
2808                         target_cpu_default2=TARGET_CPU_$target_cpu_cname
2809                 fi
2810                 ;;
2811
2812         m68k*-linux*)
2813                 case "x$with_cpu" in
2814                 x)
2815                         # The most generic
2816                         target_cpu_default2="(MASK_68020|MASK_68881|MASK_BITFIELD)"
2817                         ;;
2818                 xm68020)
2819                         target_cpu_default2="(MASK_68020|MASK_68881|MASK_BITFIELD)"
2820                         ;;
2821                 xm68030)
2822                         target_cpu_default2="(MASK_68030|MASK_68020|MASK_68881|MASK_BITFIELD)"
2823                         ;;
2824                 xm68040)
2825                         target_cpu_default2="(MASK_68040|MASK_68040_ONLY|MASK_68020|MASK_68881|MASK_BITFIELD)"
2826                         ;;
2827                 xm68060)
2828                         target_cpu_default2="(MASK_68060|MASK_68040_ONLY|MASK_68020|MASK_68881|MASK_BITFIELD)"
2829                         ;;
2830                 xm68020-40)
2831                         target_cpu_default2="(MASK_BITFIELD|MASK_68881|MASK_68020|MASK_68040)"
2832                         ;;
2833                 xm68020-60)
2834                         target_cpu_default2="(MASK_BITFIELD|MASK_68881|MASK_68020|MASK_68040|MASK_68060)"
2835                         ;;
2836                 *)
2837                         echo "Unknown CPU used in --with-cpu=$with_cpu"  1>&2
2838                         exit 1
2839                         ;;
2840                 esac
2841                 ;;
2842
2843         hppa*-*-* | parisc*-*-*)
2844                 target_cpu_default2="MASK_BIG_SWITCH"
2845                 if test x$gas = xyes
2846                 then
2847                         target_cpu_default2="${target_cpu_default2}|MASK_GAS|MASK_JUMP_IN_DELAY"
2848                 fi
2849                 ;;
2850
2851         mips*-*-*)
2852                 if test x$gnu_ld = xyes
2853                 then
2854                         target_cpu_default2="MASK_SPLIT_ADDRESSES"
2855                 fi
2856                 case ${target} in
2857                         mips*el-*-*)
2858                                 tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
2859                                 ;;
2860                 esac
2861                 if test "x$enable_gofast" = xyes
2862                 then
2863                         tm_defines="US_SOFTWARE_GOFAST $tm_defines"
2864                         tmake_file="mips/t-gofast $tmake_file"
2865                 else
2866                         tmake_file="mips/t-mips $tmake_file"
2867                 fi
2868                 ;;
2869
2870         powerpc*-*-* | rs6000-*-*)
2871                 # FIXME: The PowerPC port uses the value set at compile time,
2872                 # although it's only cosmetic.
2873                 if test "x$with_cpu" != x
2874                 then
2875                         target_cpu_default2="\\\"$with_cpu\\\""
2876                 fi
2877                 out_file=rs6000/rs6000.c
2878                 c_target_objs="${c_target_objs} rs6000-c.o"
2879                 cxx_target_objs="${cxx_target_objs} rs6000-c.o"
2880                 tmake_file="rs6000/t-rs6000 ${tmake_file}"
2881
2882                 if test x$enable_e500_double = xyes
2883                 then
2884                         tm_file="$tm_file rs6000/e500-double.h"
2885                 fi
2886                 ;;
2887
2888         sparc*-*-*)
2889                 # Some standard aliases.
2890                 case x$with_cpu in
2891                 xsparc)
2892                         with_cpu=v7
2893                         ;;
2894                 xsparcv9 | xsparc64)
2895                         with_cpu=v9
2896                         ;;
2897                 esac
2898
2899                 # The SPARC port checks this value at compile-time.
2900                 target_cpu_default2="TARGET_CPU_$with_cpu"
2901                 ;;
2902         v850*-*-*)
2903                 # FIXME: The v850 is "special" in that it does not support
2904                 # runtime CPU selection, only --with-cpu.
2905                 case "x$with_cpu" in
2906                 x)
2907                         ;;
2908                 xv850e)
2909                         target_cpu_default2="TARGET_CPU_$with_cpu"
2910                         ;;
2911                 esac
2912                 ;;
2913 esac
2914
2915 t=
2916 all_defaults="abi cpu arch tune schedule float mode fpu divide"
2917 for option in $all_defaults
2918 do
2919         eval "val=\$with_$option"
2920         if test -n "$val"; then
2921                 case " $supported_defaults " in
2922                 *" $option "*)
2923                         ;;
2924                 *)
2925                         echo "This target does not support --with-$option." 2>&1
2926                         exit 1
2927                         ;;
2928                 esac
2929
2930                 if test "x$t" = x
2931                 then
2932                         t="{ \"$option\", \"$val\" }"
2933                 else
2934                         t="${t}, { \"$option\", \"$val\" }"
2935                 fi
2936         fi
2937 done
2938
2939 if test "x$t" = x
2940 then
2941         configure_default_options="{ { NULL, NULL} }"
2942 else
2943         configure_default_options="{ ${t} }"
2944 fi
2945
2946 if test "$target_cpu_default2" != ""
2947 then
2948         if test "$target_cpu_default" != ""
2949         then
2950                 target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
2951         else
2952                 target_cpu_default=$target_cpu_default2
2953         fi
2954 fi