OSDN Git Service

* config.gcc (sh*-superh-elf): Add t-superh to tmake_file.
[pf3gnuchains/gcc-fork.git] / gcc / config.gcc
1 # GCC target-specific configuration file.
2 # Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
3 # Free Software Foundation, Inc.
4
5 #This file is part of GCC.
6
7 #GCC is free software; you can redistribute it and/or modify it under
8 #the terms of the GNU General Public License as published by the Free
9 #Software Foundation; either version 2, or (at your option) any later
10 #version.
11
12 #GCC is distributed in the hope that it will be useful, but WITHOUT
13 #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 #FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
15 #for more details.
16
17 #You should have received a copy of the GNU General Public License
18 #along with GCC; see the file COPYING.  If not, write to the Free
19 #Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
20 #02110-1301, USA.
21
22 # This is the GCC target-specific configuration file
23 # where a configuration type is mapped to different system-specific
24 # definitions and files.  This is invoked by the autoconf-generated
25 # configure script.  Putting it in a separate shell file lets us skip
26 # running autoconf when modifying target-specific information.
27
28 # This file switches on the shell variable ${target}, and also uses the
29 # following shell variables:
30 #
31 #  with_*               Various variables as set by configure.
32 #
33 #  enable_threads       Either the name, yes or no depending on whether
34 #                       threads support was requested.
35 #
36 #  default_use_cxa_atexit
37 #                         The default value for the $enable___cxa_atexit
38 #                       variable.  enable___cxa_atexit needs to be set to
39 #                       "yes" for the correct operation of C++ destructors
40 #                       but it relies upon the presence of a non-standard C
41 #                       library function called __cxa_atexit.
42 #                         Since not all C libraries provide __cxa_atexit the
43 #                       default value of $default_use_cxa_atexit is set to
44 #                       "no" except for targets which are known to be OK.
45 #
46 #  gas_flag             Either yes or no depending on whether GNU as was
47 #                       requested.
48 #
49 #  gnu_ld_flag          Either yes or no depending on whether GNU ld was
50 #                       requested.
51
52 # This file sets the following shell variables for use by the
53 # autoconf-generated configure script:
54 #
55 #  cpu_type             The name of the cpu, if different from the first
56 #                       chunk of the canonical target name.
57 #
58 #  tm_defines           List of target macros to define for all compilations.
59 #
60 #  tm_file              A list of target macro files, if different from
61 #                       "$cpu_type/$cpu_type.h". Usually it's constructed
62 #                       per target in a way like this:
63 #                       tm_file="${tm_file} dbxelf.h elfos.h svr4.h ${cpu_type.h}/elf.h"
64 #                       Note that the preferred order is:
65 #                       - specific target header "${cpu_type}/${cpu_type.h}"
66 #                       - generic headers like dbxelf.h elfos.h, etc.
67 #                       - specializing target headers like ${cpu_type.h}/elf.h
68 #                       This helps to keep OS specific stuff out of the CPU
69 #                       defining header ${cpu_type}/${cpu_type.h}.
70 #
71 #  tm_p_file            Location of file with declarations for functions
72 #                       in $out_file.
73 #
74 #  out_file             The name of the machine description C support
75 #                       file, if different from "$cpu_type/$cpu_type.c".
76 #
77 #  md_file              The name of the machine-description file, if
78 #                       different from "$cpu_type/$cpu_type.md".
79 #
80 #  tmake_file           A list of machine-description-specific
81 #                       makefile-fragments, if different from
82 #                       "$cpu_type/t-$cpu_type".
83 #
84 #  extra_modes          The name of the file containing a list of extra
85 #                       machine modes, if necessary and different from
86 #                       "$cpu_type/$cpu_type-modes.def".
87 #
88 #  extra_objs           List of extra objects that should be linked into
89 #                       the compiler proper (cc1, cc1obj, cc1plus)
90 #                       depending on target.
91 #
92 #  extra_gcc_objs       List of extra objects that should be linked into
93 #                       the compiler driver (gcc) depending on target.
94 #
95 #  extra_headers        List of used header files from the directory
96 #                       config/${cpu_type}.
97 #
98 #  extra_passes         List of extra executables compiled for this target
99 #                       machine, used for compiling from source to object.
100 #
101 #  extra_parts          List of extra object files that should be compiled
102 #                       for this target machine.
103 #
104 #  extra_programs       Like extra_passes, but these are used when linking.
105 #
106 #  extra_options        List of target-dependent .opt files.
107 #
108 #  c_target_objs        List of extra target-dependent objects that be
109 #                       linked into the C compiler only.
110 #
111 #  cxx_target_objs      List of extra target-dependent objects that be
112 #                       linked into the C++ compiler only.
113 #
114 #  target_gtfiles       List of extra source files with type information.
115 #
116 #  xm_defines           List of macros to define when compiling for the
117 #                       target machine.
118 #
119 #  xm_file              List of files to include when compiling for the
120 #                       target machine.
121 #
122 #  use_collect2         Set to yes or no, depending on whether collect2
123 #                       will be used.
124 #
125 #  target_cpu_default   Set to override the default target model.
126 #
127 #  gdb_needs_out_file_path
128 #                       Set to yes if gdb needs a dir command with
129 #                       `dirname $out_file`.
130 #
131 #  thread_file          Set to control which thread package to use.
132 #
133 #  gas                  Set to yes or no depending on whether the target
134 #                       system normally uses GNU as.
135 #
136 #  need_64bit_hwint     Set to yes if HOST_WIDE_INT must be 64 bits wide
137 #                       for this target.  This is true iff this target
138 #                       supports "long" or "wchar_t" wider than 32 bits.
139 #
140 #  configure_default_options
141 #                       Set to an initializer for configure_default_options
142 #                       in configargs.h, based on --with-cpu et cetera.
143 #
144 #  use_fixproto         Set to "yes" if fixproto should be run normally,
145 #                       "no" if fixproto should never be run.
146
147 # The following variables are used in each case-construct to build up the
148 # outgoing variables:
149 #
150 #  gnu_ld               Set to yes or no depending on whether the target
151 #                       system normally uses GNU ld.
152
153 out_file=
154 tmake_file=
155 extra_headers=
156 extra_passes=
157 extra_parts=
158 extra_programs=
159 extra_objs=
160 extra_gcc_objs=
161 extra_options=
162 c_target_objs=
163 cxx_target_objs=
164 tm_defines=
165 xm_defines=
166 # Set this to force installation and use of collect2.
167 use_collect2=
168 # Set this to override the default target model.
169 target_cpu_default=
170 # Set this if gdb needs a dir command with `dirname $out_file`
171 gdb_needs_out_file_path=
172 # Set this to control which thread package will be used.
173 thread_file=
174 # Reinitialize these from the flag values every loop pass, since some
175 # configure entries modify them.
176 gas="$gas_flag"
177 gnu_ld="$gnu_ld_flag"
178 default_use_cxa_atexit=no
179 target_gtfiles=
180 need_64bit_hwint=
181
182 # Default to not using fixproto.  Targets which need fixproto should
183 # specifically set this to 'yes'.
184 use_fixproto=no
185
186 # Don't carry these over build->host->target.  Please.
187 xm_file=
188 md_file=
189
190 # Obsolete configurations.
191 case ${target} in
192    c4x-*                \
193  | tic4x-*              \
194  )
195     if test "x$enable_obsolete" != xyes; then
196       echo "*** Configuration ${target} is obsolete." >&2
197       echo "*** Specify --enable-obsolete to build it anyway." >&2
198       echo "*** Support will be REMOVED in the next major release of GCC," >&2
199       echo "*** unless a maintainer comes forward." >&2
200       exit 1
201     fi;;
202 esac
203
204 # Unsupported targets list.  Do not put an entry in this list unless
205 # it would otherwise be caught by a more permissive pattern.  The list
206 # should be in alphabetical order.
207 case ${target} in
208    alpha*-*-linux*libc1*                \
209  | i[34567]86-sequent-sysv              \
210  | i[34567]86-sequent-sysv[123]*        \
211  | i[34567]86-go32-*                    \
212  | i[34567]86-*-go32*                   \
213  | m68k-*-linux*aout*                   \
214  | m68k-*-linux*libc1*                  \
215  | mips64orion*-*-rtems*                \
216  | powerpc-*-linux*libc1*               \
217  | sparc-*-linux*aout*                  \
218  | sparc-*-linux*libc1*                 \
219  | sparc-hal-solaris2*                  \
220  | thumb-*-*                            \
221  | *-*-linux*coff*                      \
222  | *-*-linux*oldld*                     \
223  | *-*-rtemsaout*                       \
224  | *-*-rtemscoff*                       \
225  | vax-*-vms*                           \
226  )
227         echo "*** Configuration ${target} not supported" 1>&2
228         exit 1
229         ;;
230 esac
231
232 # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
233 # updated in each machine entry.  Also set default extra_headers for some
234 # machines.
235 tm_p_file=
236 cpu_type=`echo ${target} | sed 's/-.*$//'`
237 cpu_is_64bit=
238 case ${target} in
239 m32c*-*-*)
240         cpu_type=m32c
241         tmake_file=m32c/t-m32c
242         ;;
243 alpha*-*-*)
244         cpu_type=alpha
245         need_64bit_hwint=yes
246         ;;
247 am33_2.0-*-linux*)
248         cpu_type=mn10300
249         ;;
250 strongarm*-*-*)
251         cpu_type=arm
252         ;;
253 arm*-*-*)
254         cpu_type=arm
255         extra_headers="mmintrin.h"
256         ;;
257 bfin*-*)
258         cpu_type=bfin
259         ;;
260 ep9312*-*-*)
261         cpu_type=arm
262         ;;
263 frv*)   cpu_type=frv
264         ;;
265 xscale-*-*)
266         cpu_type=arm
267         extra_headers="mmintrin.h"
268         ;;
269 i[34567]86-*-*)
270         cpu_type=i386
271         extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
272                        pmmintrin.h tmmintrin.h"
273         ;;
274 x86_64-*-*)
275         cpu_type=i386
276         extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
277                        pmmintrin.h tmmintrin.h"
278         need_64bit_hwint=yes
279         ;;
280 ia64-*-*)
281         extra_headers=ia64intrin.h
282         need_64bit_hwint=yes
283         ;;
284 hppa*-*-* | parisc*-*-*)
285         cpu_type=pa
286         ;;
287 m32r*-*-*)
288         cpu_type=m32r
289         ;;
290 m680[012]0-*-*)
291         cpu_type=m68k
292         extra_headers=math-68881.h
293         ;;
294 m68k-*-*)
295         extra_headers=math-68881.h
296         ;;
297 mips*-*-*)
298         cpu_type=mips
299         need_64bit_hwint=yes
300         ;;
301 powerpc*-*-*)
302         cpu_type=rs6000
303         extra_headers="ppc-asm.h altivec.h spe.h"
304         need_64bit_hwint=yes
305         case x$with_cpu in
306             xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[3456]|xpower6x|xrs64a)
307                 cpu_is_64bit=yes
308                 ;;
309         esac
310         ;;
311 rs6000*-*-*)
312         need_64bit_hwint=yes
313         ;;
314 score*-*-*)
315         cpu_type=score
316         ;;
317 sparc64*-*-*)
318         cpu_type=sparc
319         need_64bit_hwint=yes
320         ;;
321 sparc*-*-*)
322         cpu_type=sparc
323         ;;
324 s390*-*-*)
325         cpu_type=s390
326         need_64bit_hwint=yes
327         ;;
328 # Note the 'l'; we need to be able to match e.g. "shle" or "shl".
329 sh[123456789lbe]*-*-*)
330         cpu_type=sh
331         need_64bit_hwint=yes
332         ;;
333 tic4x-*-*)
334         cpu_type=c4x
335         ;;
336 esac
337
338 tm_file=${cpu_type}/${cpu_type}.h
339 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
340 then
341         tm_p_file=${cpu_type}/${cpu_type}-protos.h
342 fi
343 extra_modes=
344 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
345 then
346         extra_modes=${cpu_type}/${cpu_type}-modes.def
347 fi
348 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt
349 then
350         extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt"
351 fi
352
353 case ${target} in
354 x86_64-*-*)
355         tm_file="i386/biarch64.h ${tm_file}"
356         ;;
357 esac
358
359 # On a.out targets, we need to use collect2.
360 case ${target} in
361 *-*-*aout*)
362         use_collect2=yes
363         ;;
364 esac
365
366 # Common parts for widely ported systems.
367 case ${target} in
368 *-*-darwin*)
369   tm_file="${tm_file} darwin.h"
370   case ${target} in
371   *-*-darwin9*)
372     tm_file="${tm_file} darwin9.h"
373     ;;
374   esac
375   tm_file="${tm_file} ${cpu_type}/darwin.h"
376   tm_p_file="${tm_p_file} darwin-protos.h"
377   tmake_file="t-darwin ${cpu_type}/t-darwin t-slibgcc-darwin"
378   target_gtfiles="\$(srcdir)/config/darwin.c"
379   extra_options="${extra_options} darwin.opt"
380   c_target_objs="darwin-c.o"
381   cxx_target_objs="darwin-c.o"
382   extra_objs="darwin.o"
383   default_use_cxa_atexit=yes
384   case ${enable_threads} in
385     "" | yes | posix) thread_file='posix' ;;
386   esac
387   ;;
388 *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
389   # This is the place-holder for the generic a.out configuration
390   # of FreeBSD.  No actual configuration resides here since
391   # there was only ever a bare-bones ix86 configuration for
392   # a.out and it exists solely in the machine-specific section.
393   # This place-holder must exist to avoid dropping into
394   # the generic ELF configuration of FreeBSD (i.e. it must be
395   # ordered before that section).
396   ;;
397 *-*-freebsd*)
398   # This is the generic ELF configuration of FreeBSD.  Later
399   # machine-specific sections may refine and add to this
400   # configuration.
401   #
402   # Due to tm_file entry ordering issues that vary between cpu
403   # architectures, we only define fbsd_tm_file to allow the
404   # machine-specific section to dictate the final order of all
405   # entries of tm_file with the minor exception that components
406   # of the tm_file set here will always be of the form:
407   #
408   # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
409   #
410   # The machine-specific section should not tamper with this
411   # ordering but may order all other entries of tm_file as it
412   # pleases around the provided core setting.
413   gas=yes
414   gnu_ld=yes
415   extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
416   case ${target} in
417     *-*-freebsd3 | *-*-freebsd[3].*)
418       tm_defines="${tm_defines} FBSD_MAJOR=3" ;;
419     *-*-freebsd4 | *-*-freebsd[4].*)
420       tm_defines="${tm_defines} FBSD_MAJOR=4" ;;
421     *-*-freebsd5 | *-*-freebsd[5].*)
422       tm_defines="${tm_defines} FBSD_MAJOR=5" ;;
423     *-*-freebsd6 | *-*-freebsd[6].*)
424       tm_defines="${tm_defines} FBSD_MAJOR=6" ;;
425     *-*-freebsd7 | *-*-freebsd[7].*)
426       tm_defines="${tm_defines} FBSD_MAJOR=7" ;;
427     *-*-freebsd8 | *-*-freebsd[8].*)
428       tm_defines="${tm_defines} FBSD_MAJOR=8" ;;
429     *-*-freebsd9 | *-*-freebsd[9].*)
430       tm_defines="${tm_defines} FBSD_MAJOR=9" ;;
431     *)
432       echo 'Please update *-*-freebsd* in gcc/config.gcc'
433       exit 1
434       ;;
435   esac
436   tmake_file="t-slibgcc-elf-ver t-freebsd"
437   case ${enable_threads} in
438     no)
439       fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
440       ;;
441     "" | yes | posix)
442       thread_file='posix'
443       tmake_file="${tmake_file} t-freebsd-thread"
444       # Before 5.0, FreeBSD can't bind shared libraries to -lc
445       # when "optionally" threaded via weak pthread_* checks.
446       case ${target} in
447         *-*-freebsd[34] | *-*-freebsd[34].*)
448           tmake_file="${tmake_file} t-slibgcc-nolc-override"
449           ;;
450       esac
451       ;;
452     *)
453       echo 'Unknown thread configuration for FreeBSD'
454       exit 1
455       ;;
456   esac
457   fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h"
458   ;;
459 *-*-linux*libc1* | *-*-linux*aout*)
460   # Avoid the generic linux case.
461   ;;
462 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu)
463   # Must come before *-*-gnu* (because of *-*-linux-gnu* systems).
464   extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
465   extra_options="${extra_options} linux.opt"
466   gas=yes
467   gnu_ld=yes
468   case ${enable_threads} in
469     "" | yes | posix) thread_file='posix' ;;
470   esac
471   tmake_file="t-slibgcc-elf-ver t-linux"
472   case ${target} in
473     *-*-*uclibc*)
474       tm_defines="${tm_defines} UCLIBC_DEFAULT=1"
475       ;;
476     *)
477       tm_defines="${tm_defines} UCLIBC_DEFAULT=0"
478       ;;
479   esac
480   # Assume that glibc or uClibc are being used and so __cxa_atexit is provided.
481   default_use_cxa_atexit=yes
482   ;;
483 *-*-gnu*)
484   # On the Hurd, the setup is just about the same on
485   # each different CPU.  The specific machines that we
486   # support are matched above and just set $cpu_type.
487   tm_file="${cpu_type}/gnu.h"
488   extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
489   # GNU tools are the only tools.
490   gas=yes
491   gnu_ld=yes
492   # These details are the same as for Linux.
493   # But here we need a little extra magic.
494   tmake_file="t-slibgcc-elf-ver t-linux t-gnu"
495   case ${target} in
496     alpha*)
497       tm_file="${cpu_type}/${cpu_type}.h alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h ${tm_file}"
498       ;;
499     i[34567]86-*-*)
500       tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h gnu.h ${tm_file}"
501       ;;
502   esac
503   # Assume that glibc is being used and so __cxa_atexit is provided.
504   default_use_cxa_atexit=yes
505   ;;
506 *-*-netbsd*)
507   tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd t-libgcc-pic"
508   gas=yes
509   gnu_ld=yes
510
511   # NetBSD 2.0 and later get POSIX threads enabled by default.
512   # Allow them to be explicitly enabled on any other version.
513   case ${enable_threads} in
514     "")
515       case ${target} in
516         *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
517           thread_file='posix'
518           tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
519           ;;
520       esac
521       ;;
522     yes | posix)
523       thread_file='posix'
524       tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
525       ;;
526   esac
527
528   # NetBSD 1.7 and later are set up to use GCC's crtstuff for
529   # ELF configurations.  We will clear extra_parts in the
530   # a.out configurations.
531   case ${target} in
532     *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
533       extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
534       ;;
535   esac
536
537   # NetBSD 2.0 and later provide __cxa_atexit(), which we use by
538   # default (unless overridden by --disable-__cxa_atexit).
539   case ${target} in
540     *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
541       default_use_cxa_atexit=yes
542       ;;
543   esac
544   ;;
545 *-*-openbsd*)
546   tmake_file="t-libc-ok t-openbsd t-libgcc-pic"
547   case ${enable_threads} in
548     yes)
549       thread_file='posix'
550       tmake_file="${tmake_file} t-openbsd-thread"
551       ;;
552   esac
553   case ${target} in
554     *-*-openbsd2.*|*-*-openbsd3.[012])
555       tm_defines="${tm_defines} HAS_LIBC_R=1" ;;
556   esac
557   ;;
558 *-*-rtems*)
559   case ${enable_threads} in
560     yes) thread_file='rtems' ;;
561   esac
562   ;;
563 *-*-vxworks*)
564   tmake_file=t-vxworks
565   tm_file="${tm_file} elfos.h svr4.h"
566   xm_defines=POSIX
567   extra_options="${extra_options} vxworks.opt"
568   case ${enable_threads} in
569     no) ;;
570     "" | yes | vxworks) thread_file='vxworks' ;;
571     *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
572   esac
573   ;;
574 *-*-elf)
575   # Assume that newlib is being used and so __cxa_atexit is provided.
576   default_use_cxa_atexit=yes
577   ;;
578 esac
579
580 case ${target} in
581 # Support site-specific machine types.
582 *local*)
583         rest=`echo ${target} | sed -e "s/$cpu_type-//"`
584         tm_file=${cpu_type}/$rest.h
585         if test -f $srcdir/config/${cpu_type}/xm-$rest.h
586         then xm_file=${cpu_type}/xm-$rest.h
587         fi
588         if test -f $srcdir/config/${cpu_type}/t-$rest
589         then tmake_file=${cpu_type}/t-$rest
590         fi
591         ;;
592 alpha*-*-unicosmk*)
593         use_collect2=yes
594         tm_file="${tm_file} alpha/unicosmk.h"
595
596         # Don't include t-ieee for now because we don't support that yet
597         # tmake_file="alpha/t-ieee"
598         tmake_file="alpha/t-unicosmk"
599         use_fixproto=yes
600         ;;
601 alpha*-*-linux*)
602         tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
603         target_cpu_default="MASK_GAS"
604         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee alpha/t-linux"
605         ;;
606 alpha*-*-gnu*)
607         target_cpu_default="MASK_GAS"
608         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
609         ;;
610 alpha*-*-freebsd*)
611         tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
612         target_cpu_default="MASK_GAS"
613         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
614         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
615         ;;
616 alpha*-*-netbsd*)
617         tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
618         target_cpu_default="MASK_GAS"
619         tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
620         ;;
621 alpha*-*-openbsd*)
622         tm_defines="${tm_defines} OBSD_NO_DYNAMIC_LIBRARIES OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
623         tm_file="alpha/alpha.h openbsd.h alpha/openbsd.h"
624         # default x-alpha is only appropriate for dec-osf.
625         target_cpu_default="MASK_GAS"
626         tmake_file="alpha/t-alpha alpha/t-ieee"
627         ;;
628 alpha*-dec-osf[45]*)
629         if test x$stabs = xyes
630         then
631                 tm_file="${tm_file} dbx.h"
632         fi
633         if test x$gas != xyes
634         then
635                 extra_passes="mips-tfile mips-tdump"
636         fi
637         use_collect2=yes
638         tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf4"
639         tm_file="${tm_file} alpha/osf.h"
640         extra_headers=va_list.h
641         case ${target} in
642           *-*-osf4*)
643             # Define TARGET_SUPPORT_ARCH except on 4.0a.
644             case ${target} in
645                 *-*-osf4.0a) ;;
646                 *) tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
647             esac
648             ;;
649           *-*-osf5*)
650             tm_file="${tm_file} alpha/osf5.h"
651             tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
652             ;;
653         esac
654         case ${enable_threads} in
655           "" | yes | posix)
656             thread_file='posix'
657             tmake_file="${tmake_file} alpha/t-osf-pthread"
658             ;;
659         esac
660         ;;
661 alpha64-dec-*vms*)
662         tm_file="${tm_file} alpha/vms.h alpha/vms64.h"
663         xm_file="alpha/xm-vms.h"
664         tmake_file="alpha/t-alpha alpha/t-vms alpha/t-vms64 alpha/t-ieee"
665         prefix=/gnu
666         local_prefix=/gnu
667         ;;
668 alpha*-dec-*vms*)
669         tm_file="${tm_file} alpha/vms.h"
670         xm_file=alpha/xm-vms.h
671         tmake_file="alpha/t-alpha alpha/t-vms alpha/t-ieee"
672         prefix=/gnu
673         local_prefix=/gnu
674         ;;
675 arc-*-elf*)
676         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
677         extra_parts="crtinit.o crtfini.o"
678         use_fixproto=yes
679         ;;
680 arm-*-coff* | armel-*-coff*)
681         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h"
682         tmake_file="arm/t-arm arm/t-arm-coff"
683         ;;
684 arm-semi-aof | armel-semi-aof)
685         tm_file="arm/semiaof.h arm/aof.h arm/arm.h"
686         tmake_file="arm/t-arm arm/t-semi"
687         ;;
688 arm-wrs-vxworks)
689         tm_file="dbxelf.h elfos.h svr4.h vxworks.h arm/elf.h arm/aout.h arm/arm.h arm/vxworks.h"
690         tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
691         ;;
692 arm*-*-freebsd*|strongarm*-*-freebsd*)
693         tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
694         tmake_file="${tmake_file} arm/t-arm arm/t-strongarm-elf"
695         ;;
696 arm*-*-netbsdelf*)
697         tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
698         tmake_file="${tmake_file} arm/t-arm arm/t-netbsd"
699         ;;
700 arm*-*-netbsd*)
701         tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h"
702         tmake_file="t-netbsd arm/t-arm arm/t-netbsd"
703         extra_parts=""
704         use_collect2=yes
705         ;;
706 arm*-*-linux*)                  # ARM GNU/Linux with ELF
707         tm_file="dbxelf.h elfos.h linux.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
708         tmake_file="${tmake_file} t-linux arm/t-arm"
709         case ${target} in
710         arm*-*-linux-*eabi)
711             tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h"
712             tmake_file="$tmake_file arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi"
713             # The BPABI long long divmod functions return a 128-bit value in
714             # registers r0-r3.  Correctly modeling that requires the use of
715             # TImode.
716             need_64bit_hwint=yes
717             # The EABI requires the use of __cxa_atexit.
718             default_use_cxa_atexit=yes
719             ;;
720         *)
721             tmake_file="$tmake_file arm/t-linux"
722             ;;
723         esac
724         tm_file="$tm_file arm/aout.h arm/arm.h"
725         ;;
726 arm*-*-uclinux*)                # ARM ucLinux
727         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/linux-gas.h arm/linux-elf.h arm/uclinux-elf.h"
728         tmake_file="arm/t-arm arm/t-arm-elf"
729         ;;
730 arm*-*-ecos-elf)
731         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
732         tmake_file="arm/t-arm arm/t-arm-elf"
733         ;;
734 arm*-*-eabi* | arm*-*-symbianelf* )
735         # The BPABI long long divmod functions return a 128-bit value in
736         # registers r0-r3.  Correctly modeling that requires the use of
737         # TImode.
738         need_64bit_hwint=yes
739         default_use_cxa_atexit=yes
740         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
741         tmake_file="arm/t-arm arm/t-arm-elf"
742         case ${target} in
743         arm*-*-eabi*)
744           tmake_file="${tmake_file} arm/t-bpabi"
745           ;;
746         arm*-*-symbianelf*)
747           tm_file="${tm_file} arm/symbian.h"
748           # We do not include t-bpabi for Symbian OS because the system
749           # provides its own implementation of the BPABI functions.
750           tmake_file="${tmake_file} arm/t-symbian"
751           ;;
752         esac
753         tm_file="${tm_file} arm/aout.h arm/arm.h"
754         ;;
755 arm*-*-rtems*)
756         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h"
757         tmake_file="arm/t-arm arm/t-arm-elf t-rtems arm/t-rtems"
758         ;;
759 arm*-*-elf | ep9312-*-elf)
760         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
761         tmake_file="arm/t-arm arm/t-arm-elf"
762         ;;
763 arm*-wince-pe*)
764         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h"
765         tmake_file="arm/t-arm arm/t-wince-pe"
766         extra_options="${extra_options} arm/pe.opt"
767         extra_objs="pe.o"
768         ;;
769 arm-*-pe*)
770         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h"
771         tmake_file="arm/t-arm arm/t-pe"
772         extra_options="${extra_options} arm/pe.opt"
773         extra_objs="pe.o"
774         ;;
775 arm*-*-kaos*)
776         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-arm.h"
777         tmake_file="arm/t-arm arm/t-arm-elf"
778         ;;
779 avr-*-rtems*)
780         tm_file="avr/avr.h dbxelf.h avr/rtems.h rtems.h"
781         tmake_file="avr/t-avr t-rtems avr/t-rtems"
782         ;;
783 avr-*-*)
784         tm_file="avr/avr.h dbxelf.h"
785         use_fixproto=yes
786         ;;
787 bfin*-elf*)
788         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
789         tmake_file=bfin/t-bfin-elf
790         use_collect2=no
791         ;;
792 bfin*-uclinux*)
793         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/uclinux.h"
794         tmake_file=bfin/t-bfin-elf
795         use_collect2=no
796         ;;
797 bfin*-*)
798         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
799         tmake_file=bfin/t-bfin
800         use_collect2=no
801         ;;
802 c4x-*-rtems* | tic4x-*-rtems*)
803         tmake_file="c4x/t-c4x t-rtems c4x/t-rtems"
804         tm_file="c4x/c4x.h c4x/rtems.h rtems.h"
805         c_target_objs="c4x-c.o"
806         cxx_target_objs="c4x-c.o"
807         ;;
808 c4x-* | tic4x-*)
809         tmake_file=c4x/t-c4x
810         c_target_objs="c4x-c.o"
811         cxx_target_objs="c4x-c.o"
812         ;;
813 cris-*-aout)
814         tm_file="dbxelf.h ${tm_file} cris/aout.h"
815         gas=yes
816         tmake_file="cris/t-cris cris/t-aout"
817         extra_options="${extra_options} cris/aout.opt"
818         ;;
819 cris-*-elf | cris-*-none)
820         tm_file="dbxelf.h elfos.h ${tm_file}"
821         tmake_file="cris/t-cris cris/t-elfmulti"
822         gas=yes
823         extra_options="${extra_options} cris/elf.opt"
824         ;;
825 cris-*-linux*)
826         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h"
827         # We need to avoid using t-linux, so override default tmake_file
828         tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
829         extra_options="${extra_options} cris/linux.opt"
830         ;;
831 crx-*-elf)
832         tm_file="elfos.h ${tm_file}"
833         extra_parts="crtbegin.o crtend.o"
834         use_collect2=no
835         ;;
836 fr30-*-elf)
837         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
838         tmake_file=fr30/t-fr30
839         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
840         use_fixproto=yes
841         ;;
842 frv-*-elf)
843         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} frv/frv-abi.h"
844         tmake_file=frv/t-frv
845         use_fixproto=yes
846         ;;
847 frv-*-*linux*)
848         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} \
849                  linux.h frv/linux.h frv/frv-abi.h"
850         tmake_file="${tmake_file} frv/t-frv frv/t-linux"
851         ;;
852 h8300-*-rtemscoff*)
853         tmake_file="h8300/t-h8300 t-rtems h8300/t-rtems"
854         tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h h8300/rtems.h rtems.h"
855         ;;
856 h8300-*-rtems*)
857         tmake_file="h8300/t-h8300 h8300/t-elf t-rtems h8300/t-rtems"
858         tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h"
859         ;;
860 h8300-*-elf*)
861         tmake_file="h8300/t-h8300 h8300/t-elf"
862         tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h"
863         use_fixproto=yes
864         ;;
865 h8300-*-*)
866         tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h"
867         use_fixproto=yes
868         ;;
869 hppa*64*-*-linux* | parisc*64*-*-linux*)
870         target_cpu_default="MASK_PA_11|MASK_PA_20"
871         tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \
872                  pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h pa/pa64-linux.h"
873         tmake_file="${tmake_file} pa/t-linux64"
874         gas=yes gnu_ld=yes
875         need_64bit_hwint=yes
876         ;;
877 hppa*-*-linux* | parisc*-*-linux*)
878         target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
879         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \
880                  pa/pa32-regs.h pa/pa32-linux.h"
881         tmake_file="${tmake_file} pa/t-linux"
882         # Set the libgcc version number
883         if test x$sjlj = x1; then
884             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
885         else
886             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
887         fi
888         ;;
889 # port not yet contributed.
890 #hppa*-*-openbsd*)
891 #       target_cpu_default="MASK_PA_11"
892 #       ;;
893 hppa1.1-*-pro*)
894         target_cpu_default="MASK_PORTABLE_RUNTIME|MASK_NO_SPACE_REGS|MASK_SOFT_FLOAT"
895         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h \
896                  pa/pa-pro-end.h libgloss.h"
897         tmake_file="pa/t-pro"
898         ;;
899 hppa1.1-*-osf*)
900         target_cpu_default="MASK_PA_11"
901         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-osf.h"
902         tmake_file="pa/t-pa"
903         use_collect2=yes
904         ;;
905 hppa1.1-*-bsd*)
906         target_cpu_default="MASK_PA_11"
907         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h"
908         tmake_file="pa/t-pa"
909         use_collect2=yes
910         ;;
911 hppa[12]*-*-hpux10*)
912         case ${target} in
913         hppa1.1-*-* | hppa2*-*-*)
914                 target_cpu_default="MASK_PA_11"
915                 ;;
916         esac
917         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
918                  pa/pa-hpux.h pa/pa-hpux10.h"
919         extra_options="${extra_options} pa/pa-hpux.opt"
920         case ${target} in
921         *-*-hpux10.[1-9]*)
922                 tm_file="${tm_file} pa/pa-hpux1010.h"
923                 extra_options="${extra_options} pa/pa-hpux1010.opt"
924                 ;;
925         esac
926         tmake_file="pa/t-pa-hpux10 pa/t-pa-hpux pa/t-hpux-shlib"
927         case ${enable_threads} in
928           "")
929             if test x$have_pthread_h = xyes ; then
930               tmake_file="${tmake_file} pa/t-dce-thr"
931             fi
932             ;;
933           yes | dce)
934             tmake_file="${tmake_file} pa/t-dce-thr"
935             ;;
936         esac
937         # Set the libgcc version number
938         if test x$sjlj = x1; then
939             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
940         else
941             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
942         fi
943         use_collect2=yes
944         use_fixproto=yes
945         gas=yes
946         ;;
947 hppa*64*-*-hpux11*)
948         target_cpu_default="MASK_PA_11|MASK_PA_20"
949         if test x$gnu_ld = xyes
950         then
951                 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
952         fi
953         tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
954                  pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
955                  pa/pa-hpux11.h"
956         case ${target} in
957         *-*-hpux11.[1-9]*)
958                 tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
959                 extra_options="${extra_options} pa/pa-hpux1111.opt"
960                 ;;
961         *)
962                 tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
963                 ;;
964         esac
965         extra_options="${extra_options} pa/pa-hpux.opt \
966                        pa/pa-hpux1010.opt pa/pa64-hpux.opt"
967         need_64bit_hwint=yes
968         tmake_file="pa/t-pa64 pa/t-pa-hpux pa/t-hpux-shlib"
969         # Set the libgcc version number
970         if test x$sjlj = x1; then
971             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
972         else
973             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
974         fi
975         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o \
976                      libgcc_stub.a"
977         case x${enable_threads} in
978         x | xyes | xposix )
979                 thread_file=posix
980                 ;;
981         esac
982         gas=yes
983         ;;
984 hppa[12]*-*-hpux11*)
985         case ${target} in
986         hppa1.1-*-* | hppa2*-*-*)
987                 target_cpu_default="MASK_PA_11"
988                 ;;
989         esac
990         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
991                  pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h"
992         extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt"
993         case ${target} in
994         *-*-hpux11.[1-9]*)
995                 tm_file="${tm_file} pa/pa-hpux1111.h"
996                 extra_options="${extra_options} pa/pa-hpux1111.opt"
997                 ;;
998         esac
999         tmake_file="pa/t-pa-hpux11 pa/t-pa-hpux pa/t-hpux-shlib"
1000         # Set the libgcc version number
1001         if test x$sjlj = x1; then
1002             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1003         else
1004             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1005         fi
1006         case x${enable_threads} in
1007         x | xyes | xposix )
1008                 thread_file=posix
1009                 ;;
1010         esac
1011         use_collect2=yes
1012         gas=yes
1013         ;;
1014 i[34567]86-*-darwin*)
1015         need_64bit_hwint=yes
1016
1017         # This is so that '.../configure && make' doesn't fail due to
1018         # config.guess deciding that the configuration is i386-*-darwin* and
1019         # then this file using that to set --with-cpu=i386 which has no -m64
1020         # support.
1021         with_arch=${with_arch:-nocona}
1022         with_cpu=${with_cpu:-generic}
1023         ;;
1024 x86_64-*-darwin*)
1025         with_arch=${with_arch:-nocona}
1026         with_cpu=${with_cpu:-generic}
1027         tmake_file="t-darwin ${cpu_type}/t-darwin64 t-slibgcc-darwin"
1028         tm_file="${tm_file} ${cpu_type}/darwin64.h"
1029         ;;
1030 i[34567]86-*-elf*)
1031         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h"
1032         tmake_file="i386/t-i386elf t-svr4"
1033         use_fixproto=yes
1034         ;;
1035 i[34567]86-sequent-ptx4* | i[34567]86-sequent-sysv4*)
1036         if test x$gas = xyes
1037         then
1038                 tm_file="${tm_file} usegas.h"
1039         fi
1040         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ptx4.h i386/ptx4-i.h"
1041         tmake_file=t-svr4
1042         extra_parts="crtbegin.o crtend.o"
1043         use_fixproto=yes
1044         ;;
1045 i[34567]86-*-aout*)
1046         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/i386-aout.h"
1047         use_fixproto=yes
1048         ;;
1049 i[34567]86-*-beoself* | i[34567]86-*-beos*)
1050         tmake_file='i386/t-beos i386/t-crtpic'
1051         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/beos-elf.h"
1052         extra_parts='crtbegin.o crtend.o'
1053         ;;
1054 i[34567]86-*-freebsd*)
1055         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
1056         ;;
1057 x86_64-*-freebsd*)
1058         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
1059         ;;
1060 i[34567]86-*-netbsdelf*)
1061         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
1062         ;;
1063 i[34567]86-*-netbsd*)
1064         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h"
1065         tmake_file=t-netbsd
1066         extra_parts=""
1067         use_collect2=yes
1068         ;;
1069 x86_64-*-netbsd*)
1070         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
1071         ;;
1072 i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123])
1073         tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h"
1074         # needed to unconfuse gdb
1075         tmake_file="t-libc-ok t-openbsd i386/t-openbsd"
1076         # we need collect2 until our bug is fixed...
1077         use_collect2=yes
1078         ;;
1079 i[34567]86-*-openbsd*)
1080         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
1081         tm_file="${tm_file} openbsd.h i386/openbsdelf.h"
1082         gas=yes
1083         gnu_ld=yes
1084         ;;
1085 i[34567]86-*-coff*)
1086         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/i386-coff.h"
1087         use_fixproto=yes
1088         ;;
1089 i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu)
1090                         # Intel 80386's running GNU/*
1091                         # with ELF format using glibc 2
1092         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h"
1093         case ${target} in
1094         i[34567]86-*-linux*)
1095                 if test x$enable_targets = xall; then
1096                         tm_file="${tm_file} i386/x86-64.h i386/linux64.h"
1097                         tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1098                         tmake_file="${tmake_file} i386/t-linux64"
1099                         need_64bit_hwint=yes
1100                         # FIXME: -m64 for i[34567]86-*-* should be allowed just
1101                         # like -m32 for x86_64-*-*.
1102                         case X"${with_cpu}" in
1103                         Xgeneric|Xnocona|Xx86-64|Xk8|Xopteron|Xathlon64|Xathlon-fx)
1104                                 ;;
1105                         X)
1106                                 with_cpu=generic
1107                                 ;;
1108                         *)
1109                                 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1110                                 echo "generic nocona x86-64 k8 opteron athlon64 athlon-fx" 1>&2
1111                                 exit 1
1112                                 ;;
1113                         esac
1114                 else
1115                         tm_file="${tm_file} i386/linux.h"
1116                 fi
1117                 ;;
1118         i[34567]86-*-knetbsd*-gnu) tm_file="${tm_file} i386/linux.h knetbsd-gnu.h i386/knetbsd-gnu.h" ;;
1119         i[34567]86-*-kfreebsd*-gnu) tm_file="${tm_file} i386/linux.h kfreebsd-gnu.h i386/kfreebsd-gnu.h" ;;
1120         esac
1121         tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtfm t-dfprules"
1122         ;;
1123 x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
1124         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h \
1125                  i386/x86-64.h i386/linux64.h"
1126         case ${target} in
1127         x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h" ;;
1128         x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;;
1129         esac
1130         tmake_file="${tmake_file} i386/t-linux64 i386/t-crtfm t-dfprules"
1131         ;;
1132 i[34567]86-*-gnu*)
1133         ;;
1134 i[34567]86-pc-msdosdjgpp*)
1135         xm_file=i386/xm-djgpp.h
1136         tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h"
1137         tmake_file=i386/t-djgpp
1138         extra_options="${extra_options} i386/djgpp.opt"
1139         gnu_ld=yes
1140         gas=yes
1141         ;;
1142 i[34567]86-*-lynxos*)
1143         xm_defines=POSIX
1144         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
1145         tmake_file="i386/t-crtstuff t-lynx"
1146         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1147         extra_options="${extra_options} lynx.opt"
1148         thread_file=lynx
1149         gnu_ld=yes
1150         gas=yes
1151         ;;
1152 i[3456x]86-*-netware*)
1153         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h tm-dwarf2.h i386/netware.h"
1154         tmake_file=i386/t-netware
1155         extra_objs=netware.o
1156         case /${with_ld} in
1157         */nwld)
1158                 extra_objs="$extra_objs nwld.o"
1159                 tm_file="${tm_file} i386/nwld.h"
1160                 tmake_file="${tmake_file} i386/t-nwld"
1161                 extra_parts="crt0.o libgcc.def libc.def libcpre.def posixpre.def"
1162                 ;;
1163         esac
1164         case x${enable_threads} in
1165         x | xyes | xposix) thread_file='posix';;
1166         xnks) thread_file='nks';;
1167         xno) ;;
1168         *) echo 'Unknown thread configuration for NetWare' >&2; exit 1;;
1169         esac
1170         ;;
1171 i[34567]86-*-nto-qnx*)
1172         tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h svr4.h i386/unix.h i386/nto.h"
1173         tmake_file=i386/t-nto
1174         gnu_ld=yes
1175         gas=yes
1176         ;;
1177 i[34567]86-*-rtems*)
1178         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h"
1179         extra_parts="crtbegin.o crtend.o crti.o crtn.o"
1180         tmake_file="i386/t-rtems-i386 i386/t-crtstuff t-rtems"
1181         ;;
1182 i[34567]86-*-sco3.2v5*) # 80386 running SCO Open Server 5
1183         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/sco5.h"
1184         if test x$gas = xyes
1185         then
1186                 tm_file="usegas.h ${tm_file}"
1187         fi
1188         tmake_file=i386/t-sco5
1189         extra_parts="crtbegin.o crtend.o"
1190         extra_options="${extra_options} i386/sco5.opt"
1191         use_fixproto=yes
1192         ;;
1193 i[34567]86-*-solaris2*)
1194         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h"
1195         case ${target} in
1196         *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
1197                 tm_file="${tm_file} sol2-6.h"
1198                 ;;
1199         *-*-solaris2.1[0-9]*)
1200                 tm_file="${tm_file} sol2-10.h"
1201                 ;;
1202         esac
1203         tm_file="${tm_file} i386/sol2.h"
1204         tmake_file="t-sol2 i386/t-sol2 t-svr4"
1205         c_target_objs="sol2-c.o"
1206         cxx_target_objs="sol2-c.o"
1207         extra_objs="sol2.o"
1208         tm_p_file="${tm_p_file} sol2-protos.h"
1209         if test x$gnu_ld = xyes; then
1210                 tmake_file="$tmake_file t-slibgcc-elf-ver"
1211                 tm_defines="${tm_defines} TARGET_GNU_LD=1"
1212         else
1213                 tmake_file="$tmake_file t-slibgcc-sld"
1214         fi
1215         if test x$gas = xyes; then
1216                 tm_file="usegas.h ${tm_file}"
1217         fi
1218         case ${target} in
1219         *-*-solaris2.[789] | *-*-solaris2.1[0-9]*)
1220                 tm_file="$tm_file tm-dwarf2.h"
1221                 ;;
1222         esac
1223         case ${target} in
1224         *-*-solaris2.1[0-9]*)
1225                 tm_file="${tm_file} i386/x86-64.h i386/sol2-10.h"
1226                 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1227                 tmake_file="$tmake_file i386/t-sol2-10"
1228                 need_64bit_hwint=yes
1229                 # FIXME: -m64 for i[34567]86-*-* should be allowed just
1230                 # like -m32 for x86_64-*-*.
1231                 case X"${with_cpu}" in
1232                 Xgeneric|Xnocona|Xx86-64|Xk8|Xopteron|Xathlon64|Xathlon-fx)
1233                         ;;
1234                 X)
1235                         with_cpu=generic
1236                         ;;
1237                 *)
1238                         echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1239                         echo "generic nocona x86-64 k8 opteron athlon64 athlon-fx" 1>&2
1240                         exit 1
1241                         ;;
1242                 esac
1243                 # Solaris 2.10 provides crt1.o, crti.o, crtn.o, and gcrt1.o as
1244                 # part of the base system.
1245                 extra_parts="gmon.o crtbegin.o crtend.o"
1246                 ;;
1247         *)
1248                 extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
1249                 ;;
1250         esac
1251         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
1252           "":yes:* | yes:yes:* )
1253                 case ${target} in
1254                   *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
1255                         thread_file=posix95
1256                         ;;
1257                   *)
1258                         thread_file=posix
1259                         ;;
1260                 esac
1261                 ;;
1262           "":*:yes | yes:*:yes )
1263                 thread_file=solaris
1264                 ;;
1265         esac
1266         ;;
1267 i[34567]86-*-sysv5*)           # Intel x86 on System V Release 5
1268        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv5.h"
1269        if test x$stabs = xyes
1270        then
1271                tm_file="${tm_file} dbx.h"
1272        fi
1273        tmake_file="i386/t-crtpic t-svr4"
1274        extra_parts="crtbegin.o crtend.o"
1275        if test x$enable_threads = xyes; then
1276                thread_file='posix'
1277        fi
1278         use_fixproto=yes
1279        ;;
1280 i[34567]86-*-sysv4*)            # Intel 80386's running system V.4
1281         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv4-cpp.h"
1282         if test x$stabs = xyes
1283         then
1284                 tm_file="${tm_file} dbx.h"
1285         fi
1286         tmake_file="i386/t-crtpic t-svr4"
1287         extra_parts="crtbegin.o crtend.o"
1288         use_fixproto=yes
1289         ;;
1290 i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae)
1291         tm_file="${tm_file} i386/sysv4.h i386/unix.h i386/att.h vx-common.h"
1292         case ${target} in
1293           *-vxworksae*)
1294             tm_file="${tm_file} vxworksae.h i386/vxworksae.h"
1295             tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae"
1296             ;;
1297           *)
1298             tm_file="${tm_file} vxworks.h i386/vxworks.h"
1299             tmake_file="${tmake_file} i386/t-vxworks"
1300             ;;
1301         esac
1302         ;;
1303 i[34567]86-*-pe | i[34567]86-*-cygwin*)
1304         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h"
1305         xm_file=i386/xm-cygwin.h
1306         tmake_file="i386/t-cygwin i386/t-cygming"
1307         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1308         extra_options="${extra_options} i386/cygming.opt"
1309         extra_objs="winnt.o winnt-stubs.o"
1310         c_target_objs=cygwin2.o
1311         cxx_target_objs="cygwin2.o winnt-cxx.o"
1312         extra_gcc_objs=cygwin1.o
1313         if test x$enable_threads = xyes; then
1314                 thread_file='posix'
1315         fi
1316         ;;
1317 i[34567]86-*-mingw32*)
1318         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h"
1319         xm_file=i386/xm-mingw32.h
1320         tmake_file="i386/t-cygming i386/t-mingw32"
1321         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1322         extra_options="${extra_options} i386/cygming.opt"
1323         extra_objs="winnt.o winnt-stubs.o"
1324         cxx_target_objs=winnt-cxx.o
1325         default_use_cxa_atexit=yes
1326         case ${enable_threads} in
1327           "" | yes | win32)
1328           thread_file='win32'
1329           tmake_file="${tmake_file} i386/t-gthr-win32"
1330           ;;
1331         esac
1332         case ${target} in
1333                 *mingw32crt*)
1334                         tm_file="${tm_file} i386/crtdll.h"
1335                         ;;
1336                 *mingw32msv* | *mingw32*)
1337                         ;;
1338         esac
1339         ;;
1340 i[34567]86-*-uwin*)
1341         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygwin.h i386/uwin.h"
1342         tmake_file="i386/t-cygwin i386/t-uwin"
1343         extra_objs=winnt.o
1344         extra_options="${extra_options} i386/cygming.opt"
1345         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1346         if test x$enable_threads = xyes; then
1347                 thread_file='win32'
1348         fi
1349         use_fixproto=yes
1350         ;;
1351 i[34567]86-*-interix3*)
1352         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
1353         tmake_file="i386/t-interix"
1354         extra_objs=winnt.o
1355         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1356         if test x$enable_threads = xyes ; then
1357                 thread_file='posix'
1358         fi
1359         if test x$stabs = xyes ; then
1360                 tm_file="${tm_file} dbxcoff.h"
1361         fi
1362         ;;
1363 i[34567]86-*-kaos*)
1364         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h kaos.h i386/kaos-i386.h"
1365         tmake_file="i386/t-i386elf t-svr4"
1366         ;;
1367 ia64*-*-elf*)
1368         tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/elf.h"
1369         tmake_file="ia64/t-ia64"
1370         target_cpu_default="0"
1371         if test x$gas = xyes
1372         then
1373                 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1374         fi
1375         if test x$gnu_ld = xyes
1376         then
1377                 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1378         fi
1379         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1380         use_fixproto=yes
1381         ;;
1382 ia64*-*-freebsd*)
1383         tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
1384         target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1385         tmake_file="${tmake_file} ia64/t-ia64"
1386         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1387         ;;
1388 ia64*-*-linux*)
1389         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h ia64/sysv4.h ia64/linux.h"
1390         tmake_file="${tmake_file} ia64/t-ia64 t-libunwind ia64/t-glibc"
1391         if test x$with_system_libunwind != xyes ; then
1392                 tmake_file="${tmake_file} t-libunwind-elf ia64/t-glibc-libunwind"
1393         fi
1394         target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1395         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1396         ;;
1397 ia64*-*-hpux*)
1398         tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h"
1399         tmake_file="ia64/t-ia64 ia64/t-hpux"
1400         target_cpu_default="MASK_GNU_AS"
1401         case x$enable_threads in
1402         xyes | xposix )
1403                 thread_file=posix
1404                 ;;
1405         esac
1406         use_collect2=no
1407         c_target_objs="ia64-c.o"
1408         cxx_target_objs="ia64-c.o"
1409         extra_options="${extra_options} ia64/ilp32.opt"
1410         # If we decide to run fixproto we should define FIXPROTO_DEFINES
1411         # in ia64/t-hpux, and also fix the definition of putenv in
1412         # sys-protos.h (const char not char).
1413         ;;
1414 iq2000*-*-elf*)
1415         tm_file="svr4.h elfos.h iq2000/iq2000.h"
1416         tmake_file=iq2000/t-iq2000
1417         out_file=iq2000/iq2000.c
1418         md_file=iq2000/iq2000.md
1419         use_fixproto=yes
1420         ;;
1421 m32r-*-elf*)
1422         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1423         extra_parts="crtinit.o crtfini.o"
1424         use_fixproto=yes
1425         ;;
1426 m32rle-*-elf*)
1427         tm_file="dbxelf.h elfos.h svr4.h m32r/little.h ${tm_file}"
1428         extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o"
1429         use_fixproto=yes
1430         ;;
1431 m32r-*-linux*)
1432         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} m32r/linux.h"
1433         # We override the tmake_file for linux -- why?
1434         tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1435         gnu_ld=yes
1436         use_fixproto=yes
1437         if test x$enable_threads = xyes; then
1438                 thread_file='posix'
1439         fi
1440         ;;
1441 m32rle-*-linux*)
1442         tm_file="dbxelf.h elfos.h svr4.h linux.h m32r/little.h ${tm_file} m32r/linux.h"
1443         # We override the tmake_file for linux -- why?
1444         tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1445         gnu_ld=yes
1446         use_fixproto=yes
1447         if test x$enable_threads = xyes; then
1448                 thread_file='posix'
1449         fi
1450         ;;
1451 # m68hc11 and m68hc12 share the same machine description.
1452 m68hc11-*-*|m6811-*-*)
1453         tm_file="dbxelf.h elfos.h m68hc11/m68hc11.h"
1454         tm_p_file="m68hc11/m68hc11-protos.h"
1455         md_file="m68hc11/m68hc11.md"
1456         out_file="m68hc11/m68hc11.c"
1457         tmake_file="m68hc11/t-m68hc11-gas"
1458         use_fixproto=yes
1459         ;;
1460 m68hc12-*-*|m6812-*-*)
1461         tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h m68hc11/m68hc11.h"
1462         tm_p_file="m68hc11/m68hc11-protos.h"
1463         md_file="m68hc11/m68hc11.md"
1464         out_file="m68hc11/m68hc11.c"
1465         tmake_file="m68hc11/t-m68hc11-gas"
1466         extra_options="${extra_options} m68hc11/m68hc11.opt"
1467         use_fixproto=yes
1468         ;;
1469 m68k-*-aout*)
1470         tmake_file=m68k/t-m68kbare
1471         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kemb.h m68k/m68k-aout.h libgloss.h"
1472         ;;
1473 m68k-*-coff*)
1474         tmake_file=m68k/t-m68kbare
1475         tm_defines="${tm_defines} MOTOROLA USE_GAS"
1476         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kemb.h dbxcoff.h m68k/coff.h dbx.h"
1477         use_fixproto=yes
1478         ;;
1479 m68020-*-elf* | m68k-*-elf*)
1480         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h"
1481         tm_defines="${tm_defines} MOTOROLA USE_GAS"
1482         tmake_file=m68k/t-m68kelf
1483         extra_parts="crtbegin.o crtend.o"
1484         ;;
1485 m68010-*-netbsdelf* | m68k*-*-netbsdelf*)
1486         tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
1487         tm_defines="${tm_defines} MOTOROLA USE_GAS"
1488         case ${target} in
1489         m68010*)
1490                 target_cpu_default="0"
1491                 ;;
1492         *)
1493                 target_cpu_default="MASK_68020|MASK_68881|MASK_BITFIELD"
1494                 ;;
1495         esac
1496         ;;
1497 m68k*-*-openbsd*)
1498         # needed to unconfuse gdb
1499         tm_defines="${tm_defines} OBSD_OLD_GAS TARGET_DEFAULT=(MASK_68020|MASK_68881|MASK_BITFIELD)"
1500         tm_file="m68k/m68k.h openbsd.h m68k/openbsd.h"
1501         tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
1502         # we need collect2 until our bug is fixed...
1503         use_collect2=yes
1504         ;;
1505 m68k-*-uclinux*)                # Motorola m68k/ColdFire running uClinux with uClibc
1506         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux.h"
1507         tm_defines="${tm_defines} MOTOROLA USE_GAS"
1508         tmake_file=m68k/t-uclinux
1509         use_fixproto=no
1510         ;;
1511 m68k-*-linux*)          # Motorola m68k's running GNU/Linux
1512                                 # with ELF format using glibc 2
1513                                 # aka the GNU/Linux C library 6.
1514         tm_file="m68k/m68k.h dbxelf.h elfos.h svr4.h linux.h m68k/linux.h"
1515         extra_options="${extra_options} m68k/ieee.opt"
1516         tm_defines="${tm_defines} MOTOROLA USE_GAS"
1517         # if not configured with --enable-sjlj-exceptions, bump the
1518         # libgcc version number
1519         if test x$sjlj != x1; then
1520             tmake_file="$tmake_file m68k/t-slibgcc-elf-ver"
1521         fi
1522         ;;
1523 m68k-*-rtems*)
1524         tmake_file="m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems"
1525         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h"
1526         tm_defines="${tm_defines} MOTOROLA USE_GAS"
1527         extra_parts="crtbegin.o crtend.o"
1528         ;;
1529 mcore-*-elf)
1530         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} mcore/mcore-elf.h"
1531         tmake_file=mcore/t-mcore
1532         use_fixproto=yes
1533         ;;
1534 mcore-*-pe*)
1535         tm_file="svr3.h dbxcoff.h ${tm_file} mcore/mcore-pe.h"
1536         tmake_file=mcore/t-mcore-pe
1537         use_fixproto=yes
1538         ;;
1539 mips-sgi-irix[56]*)
1540         tm_file="elfos.h ${tm_file} mips/iris.h"
1541         tmake_file="mips/t-iris mips/t-slibgcc-irix"
1542         target_cpu_default="MASK_ABICALLS"
1543         case ${target} in
1544         *-*-irix5*)
1545                 tm_file="${tm_file} mips/iris5.h"
1546                 ;;
1547
1548         *-*-irix6*)
1549                 tm_file="${tm_file} mips/iris6.h"
1550                 tmake_file="${tmake_file} mips/t-iris6"
1551                 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
1552                 ;;
1553         esac
1554         if test "x$stabs" = xyes
1555         then
1556                 tm_file="${tm_file} dbx.h mips/dbxmdebug.h"
1557         fi
1558         if test "x$gnu_ld" = xyes
1559         then
1560                 tm_defines="${tm_defines} IRIX_USING_GNU_LD"
1561         fi
1562 #       if test x$enable_threads = xyes; then
1563 #               thread_file='irix'
1564 #       fi
1565         use_fixproto=yes
1566         ;;
1567 mips*-*-netbsd*)                        # NetBSD/mips, either endian.
1568         target_cpu_default="MASK_ABICALLS"
1569         tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
1570         ;;
1571 mips64*-*-linux*)
1572         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h mips/linux64.h"
1573         tmake_file="${tmake_file} mips/t-linux64"
1574         tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_N32"
1575         gnu_ld=yes
1576         gas=yes
1577         ;;
1578 mips*-*-linux*)                         # Linux MIPS, either endian.
1579         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h"
1580         case ${target} in
1581         mipsisa32*-*)
1582                 target_cpu_default="MASK_SOFT_FLOAT"
1583                 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1584                 ;;
1585         esac
1586         ;;
1587 mips*-*-openbsd*)
1588         tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
1589         target_cpu_default="MASK_ABICALLS"
1590         tm_file="mips/mips.h openbsd.h mips/openbsd.h mips/sdb.h"
1591         case ${target} in
1592         mips*el-*-openbsd*)
1593             tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";;
1594         *)  tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";;
1595         esac
1596         ;;
1597 mipsisa32-*-elf* | mipsisa32el-*-elf*)
1598         tm_file="elfos.h ${tm_file} mips/elf.h"
1599         tmake_file=mips/t-isa3264
1600         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_EABI"
1601         use_fixproto=yes
1602         ;;
1603 mipsisa32r2-*-elf* | mipsisa32r2el-*-elf*)
1604         tm_file="elfos.h ${tm_file} mips/elf.h"
1605         tmake_file=mips/t-isa3264
1606         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_EABI"
1607         use_fixproto=yes
1608         ;;
1609 mipsisa64-*-elf* | mipsisa64el-*-elf*)
1610         tm_file="elfos.h ${tm_file} mips/elf.h"
1611         tmake_file=mips/t-isa3264
1612         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1613         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_EABI"
1614         use_fixproto=yes
1615         ;;
1616 mipsisa64sr71k-*-elf*)
1617         tm_file="elfos.h ${tm_file} mips/elf.h"
1618         tmake_file=mips/t-sr71k
1619         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1620         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
1621         use_fixproto=yes
1622         ;;
1623 mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
1624         tm_file="elfos.h ${tm_file} mips/elf.h"
1625         tmake_file="mips/t-elf mips/t-sb1"
1626         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1627         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
1628         use_fixproto=yes
1629         ;;
1630 mips-*-elf* | mipsel-*-elf*)
1631         tm_file="elfos.h ${tm_file} mips/elf.h"
1632         tmake_file=mips/t-elf
1633         use_fixproto=yes
1634         ;;
1635 mips64-*-elf* | mips64el-*-elf*)
1636         tm_file="elfos.h ${tm_file} mips/elf.h"
1637         tmake_file=mips/t-elf
1638         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1639         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1640         use_fixproto=yes
1641         ;;
1642 mips64vr-*-elf* | mips64vrel-*-elf*)
1643         tm_file="mips/vr.h elfos.h ${tm_file} mips/elf.h"
1644         tmake_file=mips/t-vr
1645         use_fixproto=yes
1646         ;;
1647 mips64orion-*-elf* | mips64orionel-*-elf*)
1648         tm_file="elfos.h ${tm_file} mips/elforion.h mips/elf.h"
1649         tmake_file=mips/t-elf
1650         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1651         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1652         use_fixproto=yes
1653         ;;
1654 mips*-*-rtems*)
1655         tm_file="elfos.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
1656         tmake_file="mips/t-elf t-rtems mips/t-rtems"
1657         ;;
1658 mips-wrs-vxworks)
1659         # We want vxworks.h after mips/elf.h, which unfortunately means we
1660         # have to redo the tm_file list from scratch.
1661         tm_file="elfos.h mips/mips.h svr4.h mips/elf.h vxworks.h mips/vxworks.h"
1662         tmake_file="${tmake_file} mips/t-vxworks"
1663         ;;
1664 mips-wrs-windiss)       # Instruction-level simulator for VxWorks.
1665         xm_defines=POSIX
1666         tm_file="elfos.h mips/mips.h svr4.h mips/elf.h windiss.h mips/windiss.h"
1667         tmake_file="${tmake_file} mips/t-elf"
1668         thread_file=
1669         ;;
1670 mipstx39-*-elf* | mipstx39el-*-elf*)
1671         tm_file="elfos.h ${tm_file} mips/r3900.h mips/elf.h"
1672         tmake_file=mips/t-r3900
1673         use_fixproto=yes
1674         ;;
1675 mmix-knuth-mmixware)
1676         need_64bit_hwint=yes
1677         ;;
1678 mn10300-*-*)
1679         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1680         if test x$stabs = xyes
1681         then
1682                 tm_file="${tm_file} dbx.h"
1683         fi
1684         use_collect2=no
1685         use_fixproto=yes
1686         ;;
1687 mt-*-elf)
1688         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1689         tmake_file="${tmake_file} mt/t-mt"
1690         ;;
1691 ns32k-*-netbsdelf*)
1692         echo "GCC does not yet support the ${target} target"; exit 1
1693         ;;
1694 ns32k-*-netbsd*)
1695         tm_file="${tm_file} netbsd.h netbsd-aout.h ns32k/netbsd.h"
1696         # On NetBSD, the headers are already okay, except for math.h.
1697         tmake_file="t-netbsd ns32k/t-ns32k"
1698         extra_parts=""
1699         use_collect2=yes
1700         ;;
1701 pdp11-*-bsd)
1702         tm_file="${tm_file} pdp11/2bsd.h"
1703         use_fixproto=yes
1704         ;;
1705 pdp11-*-*)
1706         use_fixproto=yes
1707         ;;
1708 # port not yet contributed
1709 #powerpc-*-openbsd*)
1710 #       tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit "
1711 #       extra_headers=
1712 #       ;;
1713 powerpc64-*-linux*)
1714         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1715         test x$with_cpu != x || cpu_is_64bit=yes
1716         test x$cpu_is_64bit != xyes || tm_file="${tm_file} rs6000/default64.h"
1717         tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
1718         if test x${enable_secureplt} = xyes; then
1719                 tm_file="rs6000/secureplt.h ${tm_file}"
1720         fi
1721         extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
1722         tmake_file="t-dfprules rs6000/t-fprules ${tmake_file} rs6000/t-ppccomm rs6000/t-linux64 rs6000/t-fprules-softfp soft-fp/t-softfp"
1723         ;;
1724 powerpc64-*-gnu*)
1725         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux64.h rs6000/gnu.h"
1726         extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
1727         tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-gnu rs6000/t-linux64 rs6000/t-fprules-softfp soft-fp/t-softfp"
1728         ;;
1729 powerpc-*-beos*)
1730         tm_file="${tm_file} rs6000/aix.h rs6000/beos.h rs6000/xcoff.h"
1731         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-beos"
1732         extra_headers=
1733         use_fixproto=yes
1734         ;;
1735 powerpc-*-darwin*)
1736         extra_options="${extra_options} rs6000/darwin.opt"
1737         extra_parts="crt2.o"
1738         case ${target} in
1739           *-darwin1[0-9]* | *-darwin[8-9]*)
1740             tmake_file="${tmake_file} rs6000/t-darwin8"
1741             tm_file="${tm_file} rs6000/darwin8.h"
1742             ;;
1743           *-darwin7*)
1744             tm_file="${tm_file} rs6000/darwin7.h"
1745             ;;
1746           *-darwin[0-6]*)
1747             ;;
1748         esac
1749         extra_headers=altivec.h
1750         ;;
1751 powerpc64-*-darwin*)
1752         tm_file="${tm_file} ${cpu_type}/darwin8.h ${cpu_type}/darwin64.h"
1753         extra_options="${extra_options} ${cpu_type}/darwin.opt"
1754         # We're omitting t-darwin8 to avoid building any multilibs
1755         extra_headers=altivec.h
1756         ;;
1757 powerpc*-*-freebsd*)
1758         tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
1759         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1760         extra_options="${extra_options} rs6000/sysv4.opt"
1761         ;;
1762 powerpc-*-netbsd*)
1763         tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
1764         tmake_file="${tmake_file} rs6000/t-netbsd"
1765         extra_options="${extra_options} rs6000/sysv4.opt"
1766         ;;
1767 powerpc-*-chorusos*)
1768         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h chorus.h"
1769         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos rs6000/t-ppccomm"
1770         extra_options="${extra_options} rs6000/sysv4.opt"
1771         case ${enable_threads} in
1772           yes | posix)
1773             thread_file='posix'
1774             ;;
1775         esac
1776         use_fixproto=yes
1777         ;;
1778 powerpc-*-eabispe*)
1779         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabispe.h"
1780         extra_options="${extra_options} rs6000/sysv4.opt"
1781         tmake_file="rs6000/t-spe rs6000/t-ppccomm"
1782         ;;
1783 powerpc-*-eabisimaltivec*)
1784         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h rs6000/eabialtivec.h"
1785         extra_options="${extra_options} rs6000/sysv4.opt"
1786         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
1787         ;;
1788 powerpc-*-eabisim*)
1789         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h"
1790         extra_options="${extra_options} rs6000/sysv4.opt"
1791         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1792         ;;
1793 powerpc-*-elf*)
1794         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1795         extra_options="${extra_options} rs6000/sysv4.opt"
1796         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1797         use_fixproto=yes
1798         ;;
1799 powerpc-*-eabialtivec*)
1800         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabialtivec.h"
1801         extra_options="${extra_options} rs6000/sysv4.opt"
1802         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
1803         ;;
1804 powerpc-*-eabi*)
1805         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h"
1806         extra_options="${extra_options} rs6000/sysv4.opt"
1807         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1808         ;;
1809 powerpc-*-rtems*)
1810         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/rtems.h rtems.h"
1811         extra_options="${extra_options} rs6000/sysv4.opt"
1812         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-rtems t-rtems rs6000/t-ppccomm"
1813         ;;
1814 powerpc-*-linux*altivec*)
1815         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h"
1816         extra_options="${extra_options} rs6000/sysv4.opt"
1817         tmake_file="rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1818         ;;
1819 powerpc-*-linux*spe*)
1820         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxspe.h"
1821         extra_options="${extra_options} rs6000/sysv4.opt"
1822         tmake_file="rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1823         ;;
1824 powerpc-*-linux*)
1825         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1826         extra_options="${extra_options} rs6000/sysv4.opt"
1827         tmake_file="t-dfprules rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1828         case ${enable_targets}:${cpu_is_64bit} in
1829             *powerpc64* | all:* | *:yes)
1830                 if test x$cpu_is_64bit = xyes; then
1831                     tm_file="${tm_file} rs6000/default64.h"
1832                 fi
1833                 tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
1834                 tmake_file="$tmake_file rs6000/t-linux64"
1835                 extra_options="${extra_options} rs6000/linux64.opt"
1836                 ;;
1837             *)
1838                 tm_file="${tm_file} rs6000/linux.h"
1839                 ;;
1840         esac
1841         if test x${enable_secureplt} = xyes; then
1842                 tm_file="rs6000/secureplt.h ${tm_file}"
1843         fi
1844         ;;
1845 powerpc-*-gnu-gnualtivec*)
1846         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h"
1847         extra_options="${extra_options} rs6000/sysv4.opt"
1848         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1849         if test x$enable_threads = xyes; then
1850                 thread_file='posix'
1851         fi
1852         ;;
1853 powerpc-*-gnu*)
1854         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h"
1855         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1856         extra_options="${extra_options} rs6000/sysv4.opt"
1857         if test x$enable_threads = xyes; then
1858                 thread_file='posix'
1859         fi
1860         ;;
1861 powerpc-wrs-vxworks|powerpc-wrs-vxworksae)
1862         # We want vxworks.h after rs6000/sysv4.h, which unfortunately
1863         # means we have to redo the tm_file list from scratch.
1864         tm_file="rs6000/rs6000.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1865         tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppccomm rs6000/t-vxworks"
1866         extra_options="${extra_options} rs6000/sysv4.opt"
1867         extra_headers=ppc-asm.h
1868         case ${target} in
1869           *-vxworksae*)
1870             tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/vxworksae.h"
1871             tmake_file="${tmake_file} rs6000/t-vxworksae"
1872             ;;
1873           *-vxworks*)
1874             tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h"
1875             ;;
1876         esac
1877         ;;
1878 powerpc-wrs-windiss*)  # Instruction-level simulator for VxWorks.
1879         tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/windiss.h"
1880         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1881         extra_options="${extra_options} rs6000/sysv4.opt"
1882         thread_file=""
1883         use_fixproto=yes
1884         ;;
1885 powerpc-*-lynxos*)
1886         xm_defines=POSIX
1887         tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
1888         tmake_file="t-lynx rs6000/t-lynx"
1889         extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
1890         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1891         extra_options="${extra_options} lynx.opt"
1892         thread_file=lynx
1893         gnu_ld=yes
1894         gas=yes
1895         ;;
1896 powerpcle-*-sysv*)
1897         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
1898         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos rs6000/t-ppccomm"
1899         extra_options="${extra_options} rs6000/sysv4.opt"
1900         use_fixproto=yes
1901         ;;
1902 powerpcle-*-elf*)
1903         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
1904         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1905         extra_options="${extra_options} rs6000/sysv4.opt"
1906         use_fixproto=yes
1907         ;;
1908 powerpcle-*-eabisim*)
1909         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/eabisim.h"
1910         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1911         extra_options="${extra_options} rs6000/sysv4.opt"
1912         ;;
1913 powerpcle-*-eabi*)
1914         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h"
1915         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1916         extra_options="${extra_options} rs6000/sysv4.opt"
1917         ;;
1918 powerpc-*-kaos*)
1919         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h kaos.h rs6000/kaos-ppc.h"
1920         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1921         extra_options="${extra_options} rs6000/sysv4.opt"
1922         ;;
1923 powerpcle-*-kaos*)
1924         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h kaos.h rs6000/kaos-ppc.h"
1925         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1926         extra_options="${extra_options} rs6000/sysv4.opt"
1927         ;;
1928 rs6000-ibm-aix4.[12]* | powerpc-ibm-aix4.[12]*)
1929         tm_file="${tm_file} rs6000/aix.h rs6000/aix41.h rs6000/xcoff.h"
1930         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-newas"
1931         extra_options="${extra_options} rs6000/aix41.opt"
1932         use_collect2=yes
1933         extra_headers=
1934         use_fixproto=yes
1935         ;;
1936 rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
1937         tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h"
1938         tmake_file=rs6000/t-aix43
1939         extra_options="${extra_options} rs6000/aix64.opt"
1940         use_collect2=yes
1941         thread_file='aix'
1942         extra_headers=
1943         ;;
1944 rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
1945         tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h"
1946         extra_options="${extra_options} rs6000/aix64.opt"
1947         tmake_file=rs6000/t-aix43
1948         use_collect2=yes
1949         thread_file='aix'
1950         extra_headers=
1951         ;;
1952 rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*)
1953         tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h"
1954         tmake_file=rs6000/t-aix52
1955         extra_options="${extra_options} rs6000/aix64.opt"
1956         use_collect2=yes
1957         thread_file='aix'
1958         extra_headers=
1959         ;;
1960 s390-*-linux*)
1961         tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
1962         tmake_file="${tmake_file} t-dfprules s390/t-crtstuff s390/t-linux"
1963         ;;
1964 s390x-*-linux*)
1965         tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
1966         tm_p_file=s390/s390-protos.h
1967         md_file=s390/s390.md
1968         extra_modes=s390/s390-modes.def
1969         out_file=s390/s390.c
1970         tmake_file="${tmake_file} t-dfprules s390/t-crtstuff s390/t-linux s390/t-linux64"
1971         ;;
1972 s390x-ibm-tpf*)
1973         tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h s390/tpf.h"
1974         tm_p_file=s390/s390-protos.h
1975         md_file=s390/s390.md
1976         extra_modes=s390/s390-modes.def
1977         out_file=s390/s390.c
1978         extra_parts="crtbeginS.o crtendS.o"
1979         tmake_file="s390/t-crtstuff s390/t-tpf"
1980         thread_file='tpf'
1981         extra_options="${extra_options} s390/tpf.opt"
1982         ;;
1983 score-*-elf)
1984         tm_file="dbxelf.h elfos.h score/elf.h score/score.h"
1985         tmake_file=score/t-score-elf
1986         extra_objs="score-mdaux.o"
1987         ;;
1988 sh-*-elf* | sh[12346l]*-*-elf* | sh*-*-kaos* | \
1989 sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \
1990   sh-*-linux* | sh[346lbe]*-*-linux* | \
1991   sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
1992    sh64-*-netbsd* | sh64l*-*-netbsd*)
1993         tmake_file="${tmake_file} sh/t-sh sh/t-elf"
1994         if test x${with_endian} = x; then
1995                 case ${target} in
1996                 sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;;
1997                 shbe-*-* | sheb-*-*)               with_endian=big,little ;;
1998                 sh[1234]l* | sh[34]*-*-linux*)     with_endian=little ;;
1999                 shl* | sh64l* | sh*-*-linux* | \
2000                   sh5l* | sh-superh-elf)           with_endian=little,big ;;
2001                 sh[1234]*-*-*)                     with_endian=big ;;
2002                 *)                                 with_endian=big,little ;;
2003                 esac
2004         fi
2005         case ${with_endian} in
2006         big|little)     tmake_file="${tmake_file} sh/t-1e" ;;
2007         big,little|little,big) ;;
2008         *)      echo "with_endian=${with_endian} not supported."; exit 1 ;;
2009         esac
2010         case ${with_endian} in
2011         little*)        tm_file="sh/little.h ${tm_file}" ;;
2012         esac
2013         tm_file="${tm_file} dbxelf.h elfos.h"
2014         case ${target} in
2015         sh*-*-netbsd*)  ;;
2016         *)              tm_file="${tm_file} svr4.h" ;;
2017         esac
2018         tm_file="${tm_file} sh/elf.h"
2019         case ${target} in
2020         sh*-*-linux*)   tmake_file="${tmake_file} sh/t-linux"
2021                         tm_file="${tm_file} linux.h sh/linux.h" ;;
2022         sh*-*-kaos*)    tm_file="${tm_file} sh/embed-elf.h kaos.h sh/kaos-sh.h"
2023                         ;;
2024         sh*-*-netbsd*)  tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h" ;;
2025         sh*-superh-elf) if test x$with_libgloss != xno; then
2026                                 with_libgloss=yes
2027                                 tm_file="${tm_file} sh/newlib.h"
2028                         fi
2029                         tm_file="${tm_file} sh/embed-elf.h sh/superh.h"
2030                         tmake_file="${tmake_file} sh/t-superh"
2031                         extra_options="${extra_options} sh/superh.opt" ;;
2032         *)              if test x$with_newlib = xyes \
2033                            && test x$with_libgloss = xyes; then
2034                                 tm_file="${tm_file} sh/newlib.h"
2035                         fi
2036                         tm_file="${tm_file} sh/embed-elf.h" ;;
2037         esac
2038         case ${target} in
2039         sh5*-*-netbsd*)
2040                 # SHmedia, 32-bit ABI
2041                 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd"
2042                 ;;
2043         sh64*-netbsd*)
2044                 # SHmedia, 64-bit ABI
2045                 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd sh/t-netbsd-sh5-64"
2046                 ;;
2047         *-*-netbsd)
2048                 tmake_file="${tmake_file} sh/t-netbsd"
2049                 ;;
2050         sh64*-*-linux*)
2051                 tmake_file="${tmake_file} sh/t-sh64 sh/t-linux64"
2052                 tm_file="${tm_file} sh/sh64.h"
2053                 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2054                 ;;
2055         sh64*)
2056                 tmake_file="${tmake_file} sh/t-sh64"
2057                 tm_file="${tm_file} sh/sh64.h"
2058                 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2059                 ;;
2060         *-*-symbianelf*)
2061                 tmake_file="sh/t-symbian"
2062                 tm_file="sh/symbian-pre.h sh/little.h ${tm_file} sh/symbian-post.h"
2063                 extra_objs="symbian.o"
2064                 extra_parts="crt1.o crti.o crtn.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
2065                 ;;
2066         esac
2067         # sed el/eb endian suffixes away to avoid confusion with sh[23]e
2068         case `echo ${target} | sed 's/e[lb]-/-/'` in
2069         sh64*-*-netbsd*)        sh_cpu_target=sh5-64media ;;
2070         sh64* | sh5*-*-netbsd*) sh_cpu_target=sh5-32media ;;
2071         sh4a_single_only*)      sh_cpu_target=sh4a-single-only ;;
2072         sh4a_single*)           sh_cpu_target=sh4a-single ;;
2073         sh4a_nofpu*)            sh_cpu_target=sh4a-nofpu ;;
2074         sh4al)                  sh_cpu_target=sh4al ;;
2075         sh4a*)                  sh_cpu_target=sh4a ;;
2076         sh4_single_only*)       sh_cpu_target=sh4-single-only ;;
2077         sh4_single*)            sh_cpu_target=sh4-single ;;
2078         sh4_nofpu*)             sh_cpu_target=sh4-nofpu ;;
2079         sh4* | sh-superh-*)     sh_cpu_target=sh4 ;;
2080         sh3e*)                  sh_cpu_target=sh3e ;;
2081         sh*-*-netbsd* | sh3*)   sh_cpu_target=sh3 ;;
2082         sh2a_single_only*)      sh_cpu_target=sh2a-single-only ;;
2083         sh2a_single*)           sh_cpu_target=sh2a-single ;;
2084         sh2a_nofpu*)            sh_cpu_target=sh2a-nofpu ;;
2085         sh2a*)                  sh_cpu_target=sh2a ;;
2086         sh2e*)                  sh_cpu_target=sh2e ;;
2087         sh2*)                   sh_cpu_target=sh2 ;;
2088         *)                      sh_cpu_target=sh1 ;;
2089         esac
2090         # did the user say --without-fp ?
2091         if test x$with_fp = xno; then
2092                 case ${sh_cpu_target} in
2093                 sh5-*media)     sh_cpu_target=${sh_cpu_target}-nofpu ;;
2094                 sh4al | sh1)    ;;
2095                 sh4a* )         sh_cpu_target=sh4a-nofpu ;;
2096                 sh4*)           sh_cpu_target=sh4-nofpu ;;
2097                 sh3*)           sh_cpu_target=sh3 ;;
2098                 sh2a*)          sh_cpu_target=sh2a-nofpu ;;
2099                 sh2*)           sh_cpu_target=sh2 ;;
2100                 *)      echo --without-fp not available for $target: ignored
2101                 esac
2102                 tm_defines="$tm_defines STRICT_NOFPU=1"
2103         fi
2104         sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`"
2105         case $sh_cpu_default in
2106         sh5-64media-nofpu | sh5-64media | \
2107           sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \
2108           sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
2109           sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
2110           sh4-single-only | sh4-single | sh4-nofpu | sh4 | \
2111           sh3e | sh3 | sh2e | sh2 | sh1) ;;
2112         "")     sh_cpu_default=${sh_cpu_target} ;;
2113         *)      echo "with_cpu=$with_cpu not supported"; exit 1 ;;
2114         esac
2115         sh_multilibs=${with_multilib_list}
2116         if test x${sh_multilibs} = x ; then
2117                 case ${target} in
2118                 sh64-superh-linux* | \
2119                 sh[1234]*)      sh_multilibs=${sh_cpu_target} ;;
2120                 sh64* | sh5*)   sh_multilibs=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu ;;
2121                 sh-superh-*)    sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;;
2122                 sh*-*-linux*)   sh_multilibs=m1,m3e,m4 ;;
2123                 sh*-*-netbsd*)  sh_multilibs=m3,m3e,m4 ;;
2124                 *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;;
2125                 esac
2126                 if test x$with_fp = xno; then
2127                         sh_multilibs="`echo $sh_multilibs|sed -e s/m4/sh4-nofpu/ -e s/,m4-[^,]*//g -e s/,m[23]e// -e s/m2a,m2a-single/m2a-nofpu/ -e s/m5-..m....,//g`"
2128                 fi
2129         fi
2130         target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`
2131         tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"'
2132         sh_multilibs=`echo $sh_multilibs,$sh_cpu_default | sed -e 's/[  ,/][    ,]*/ /g' -e 's/ $//' -e 's/^m/sh/' -e 's/ m/ sh/g' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-`
2133         for sh_multilib in ${sh_multilibs}; do
2134                 case ${sh_multilib} in
2135                 sh1 | sh2 | sh2e | sh3 | sh3e | \
2136                 sh4 | sh4-single | sh4-single-only | sh4-nofpu | \
2137                 sh4a | sh4a-single | sh4a-single-only | sh4a-nofpu | sh4al | \
2138                 sh2a | sh2a-single | sh2a-single-only | sh2a-nofpu | \
2139                 sh5-64media | sh5-64media-nofpu | \
2140                 sh5-32media | sh5-32media-nofpu | \
2141                 sh5-compact | sh5-compact-nofpu)
2142                         tmake_file="${tmake_file} sh/t-mlib-${sh_multilib}"
2143                         tm_defines="$tm_defines SUPPORT_`echo $sh_multilib|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
2144                         ;;
2145                 *)
2146                         echo "with_multilib_list=${sh_multilib} not supported."
2147                         exit 1
2148                         ;;
2149                 esac
2150         done
2151         if test x${enable_incomplete_targets} = xyes ; then
2152                 tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1"
2153         fi
2154         use_fixproto=yes
2155         ;;
2156 sh-*-rtemscoff*)
2157         tmake_file="sh/t-sh t-rtems sh/t-rtems"
2158         tm_file="${tm_file} dbxcoff.h sh/coff.h sh/rtems.h rtems.h"
2159         ;;
2160 sh-*-rtems*)
2161         tmake_file="sh/t-sh sh/t-elf t-rtems sh/t-rtems"
2162         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h"
2163         ;;
2164 sh-wrs-vxworks)
2165         tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks"
2166         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/embed-elf.h sh/vxworks.h"
2167         ;;
2168 sh-*-*)
2169         tm_file="${tm_file} dbxcoff.h sh/coff.h"
2170         use_fixproto=yes
2171         ;;
2172 sparc-*-netbsdelf*)
2173         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2174         extra_options="${extra_options} sparc/long-double-switch.opt"
2175         ;;
2176 sparc64-*-openbsd*)
2177         tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h"
2178         extra_options="${extra_options} sparc/little-endian.opt"
2179         gas=yes gnu_ld=yes
2180         with_cpu=ultrasparc
2181         ;;
2182 sparc-*-elf*)
2183         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h"
2184         tmake_file="sparc/t-elf sparc/t-crtfm"
2185         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2186         use_fixproto=yes
2187         ;;
2188 sparc-*-linux*)         # SPARC's running GNU/Linux, libc6
2189         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h"
2190         extra_options="${extra_options} sparc/long-double-switch.opt"
2191         tmake_file="${tmake_file} sparc/t-linux sparc/t-crtfm"
2192         ;;
2193 sparc-*-rtems*)
2194         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h"
2195         tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
2196         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2197         ;;
2198 sparc64-*-solaris2* | sparcv9-*-solaris2*)
2199         tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
2200         case ${target} in
2201         *-*-solaris2.1[0-9]*)
2202                 tm_file="${tm_file} sol2-10.h"
2203                 ;;
2204         esac
2205         tm_file="${tm_file} sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h"
2206         if test x$gnu_ld = xyes; then
2207                 tm_file="${tm_file} sparc/sol2-gld.h sparc/sol2-gld-bi.h"
2208         fi
2209         if test x$gas = xyes; then
2210                 tm_file="${tm_file} sparc/sol2-gas.h sparc/sol2-gas-bi.h"
2211         fi
2212         tm_file="${tm_file} tm-dwarf2.h"
2213         tmake_file="t-sol2 sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm"
2214         if test x$gnu_ld = xyes; then
2215                 tmake_file="$tmake_file t-slibgcc-elf-ver"
2216         else
2217                 tmake_file="$tmake_file t-slibgcc-sld"
2218         fi
2219         c_target_objs="sol2-c.o"
2220         cxx_target_objs="sol2-c.o"
2221         extra_objs="sol2.o"
2222         tm_p_file="${tm_p_file} sol2-protos.h"
2223         extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o"
2224         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2225           "":yes:* | yes:yes:* ) thread_file=posix ;;
2226           "":*:yes | yes:*:yes ) thread_file=solaris ;;
2227         esac
2228         need_64bit_hwint=yes
2229         ;;
2230 sparc-*-solaris2*)
2231         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
2232         case ${target} in
2233         *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2234                 tm_file="${tm_file} sol2-6.h"
2235                 ;;
2236         *-*-solaris2.1[0-9]*)
2237                 tm_file="${tm_file} sol2-10.h"
2238                 ;;
2239         esac
2240         tm_file="${tm_file} sparc/sol2.h"
2241         if test x$gnu_ld = xyes; then
2242                 tm_file="${tm_file} sparc/sol2-gld.h"
2243         fi
2244         if test x$gas = xyes; then
2245                 tm_file="${tm_file} sparc/sol2-gas.h"
2246         fi
2247         tmake_file="t-sol2 sparc/t-sol2 sparc/t-crtfm"
2248         if test x$gnu_ld = xyes; then
2249                 tmake_file="$tmake_file t-slibgcc-elf-ver"
2250         else
2251                 tmake_file="$tmake_file t-slibgcc-sld"
2252         fi
2253         case ${target} in
2254         *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2255                 if test x$gnu_ld = xno; then
2256                         tm_file="${tm_file} sparc/sol26-sld.h"
2257                 fi
2258                 ;;
2259         *-*-solaris2.[789] | *-*-solaris2.1[0-9]*)
2260                 tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h"
2261                 if test x$gnu_ld = xyes; then
2262                         tm_file="${tm_file} sparc/sol2-gld-bi.h"
2263                 fi
2264                 if test x$gas = xyes; then
2265                         tm_file="${tm_file} sparc/sol2-gas-bi.h"
2266                 fi
2267                 tm_file="${tm_file} tm-dwarf2.h"
2268                 tmake_file="$tmake_file sparc/t-sol2-64"
2269                 need_64bit_hwint=yes
2270                 test x$with_cpu != x || with_cpu=v9
2271                 ;;
2272         esac
2273         c_target_objs="sol2-c.o"
2274         cxx_target_objs="sol2-c.o"
2275         extra_objs="sol2.o"
2276         tm_p_file="${tm_p_file} sol2-protos.h"
2277         extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
2278         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2279           "":yes:* | yes:yes:* )
2280                 case ${target} in
2281                   *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2282                         thread_file=posix95
2283                         ;;
2284                   *)
2285                         thread_file=posix
2286                         ;;
2287                 esac
2288                 ;;
2289           "":*:yes | yes:*:yes )
2290                 thread_file=solaris
2291                 ;;
2292         esac
2293         ;;
2294 sparc-*-sysv4*)
2295         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sysv4-only.h"
2296         tmake_file=t-svr4
2297         extra_parts="crtbegin.o crtend.o"
2298         use_fixproto=yes
2299         ;;
2300 sparc64-*-elf*)
2301         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h"
2302         extra_options="${extra_options} sparc/little-endian.opt"
2303         tmake_file="${tmake_file} sparc/t-crtfm"
2304         extra_parts="crtbegin.o crtend.o"
2305         use_fixproto=yes
2306         ;;
2307 sparc64-*-freebsd*|ultrasparc-*-freebsd*)
2308         tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
2309         extra_options="${extra_options} sparc/long-double-switch.opt"
2310         tmake_file="${tmake_file} sparc/t-crtfm"
2311         case "x$with_cpu" in
2312                 xultrasparc) ;;
2313                 x) with_cpu=ultrasparc ;;
2314                 *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
2315         esac
2316         need_64bit_hwint=yes
2317         ;;
2318 sparc64-*-linux*)               # 64-bit SPARC's running GNU/Linux
2319         tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux64.h"
2320         extra_options="${extra_options} sparc/long-double-switch.opt"
2321         tmake_file="${tmake_file} sparc/t-linux sparc/t-linux64 sparc/t-crtfm"
2322         ;;
2323 sparc64-*-netbsd*)
2324         tm_file="sparc/biarch64.h ${tm_file}"
2325         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2326         extra_options="${extra_options} sparc/long-double-switch.opt"
2327         tmake_file="${tmake_file} sparc/t-netbsd64"
2328         ;;
2329 strongarm-*-elf*)
2330         tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
2331         tmake_file="arm/t-arm arm/t-strongarm-elf"
2332         out_file=arm/arm.c
2333         md_file=arm/arm.md
2334         extra_modes=arm/arm-modes.def
2335         use_fixproto=yes
2336         ;;
2337 strongarm-*-pe)
2338         tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/strongarm-coff.h arm/arm.h arm/pe.h arm/strongarm-pe.h"
2339         tmake_file="arm/t-arm arm/t-strongarm-pe"
2340         out_file=arm/arm.c
2341         md_file=arm/arm.md
2342         extra_modes=arm/arm-modes.def
2343         extra_options="${extra_options} arm/pe.opt"
2344         extra_objs=pe.o
2345         use_fixproto=yes
2346         ;;
2347 strongarm-*-kaos*)
2348         tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-strongarm.h"
2349         tmake_file="arm/t-arm arm/t-strongarm-elf"
2350         out_file=arm/arm.c
2351         md_file=arm/arm.md
2352         extra_modes=arm/arm-modes.def
2353         ;;
2354 v850e1-*-*)
2355         target_cpu_default="TARGET_CPU_v850e1"
2356         tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
2357         tm_p_file=v850/v850-protos.h
2358         tmake_file=v850/t-v850e
2359         md_file=v850/v850.md
2360         out_file=v850/v850.c
2361         extra_options="${extra_options} v850/v850.opt"
2362         if test x$stabs = xyes
2363         then
2364                 tm_file="${tm_file} dbx.h"
2365         fi
2366         use_collect2=no
2367         c_target_objs="v850-c.o"
2368         cxx_target_objs="v850-c.o"
2369         use_fixproto=yes
2370         ;;
2371 v850e-*-*)
2372         target_cpu_default="TARGET_CPU_v850e"
2373         tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
2374         tm_p_file=v850/v850-protos.h
2375         tmake_file=v850/t-v850e
2376         md_file=v850/v850.md
2377         out_file=v850/v850.c
2378         extra_options="${extra_options} v850/v850.opt"
2379         if test x$stabs = xyes
2380         then
2381                 tm_file="${tm_file} dbx.h"
2382         fi
2383         use_collect2=no
2384         c_target_objs="v850-c.o"
2385         cxx_target_objs="v850-c.o"
2386         use_fixproto=yes
2387         ;;
2388 v850-*-*)
2389         target_cpu_default="TARGET_CPU_generic"
2390         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
2391         tmake_file=v850/t-v850
2392         if test x$stabs = xyes
2393         then
2394                 tm_file="${tm_file} dbx.h"
2395         fi
2396         use_collect2=no
2397         c_target_objs="v850-c.o"
2398         cxx_target_objs="v850-c.o"
2399         use_fixproto=yes
2400         ;;
2401 vax-*-bsd*)                     # VAXen running BSD
2402         tm_file="${tm_file} vax/bsd.h"
2403         tmake_file=vax/t-memfuncs
2404         use_collect2=yes
2405         use_fixproto=yes
2406         ;;
2407 vax-*-sysv*)                    # VAXen running system V
2408         tm_file="${tm_file} vax/vaxv.h"
2409         tmake_file=vax/t-memfuncs
2410         use_fixproto=yes
2411         ;;
2412 vax-*-netbsdelf*)
2413         tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
2414         ;;
2415 vax-*-netbsd*)
2416         tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h"
2417         tmake_file=t-netbsd
2418         extra_parts=""
2419         use_collect2=yes
2420         ;;
2421 vax-*-openbsd*)
2422         tm_file="vax/vax.h vax/openbsd1.h openbsd.h vax/openbsd.h"
2423         use_collect2=yes
2424         ;;
2425 vax-*-ultrix*)                  # VAXen running ultrix
2426         tm_file="${tm_file} vax/ultrix.h"
2427         tmake_file=vax/t-memfuncs
2428         use_fixproto=yes
2429         ;;
2430 xscale-*-elf)
2431         tm_file="arm/xscale-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
2432         tmake_file="arm/t-arm arm/t-xscale-elf"
2433         out_file=arm/arm.c
2434         md_file=arm/arm.md
2435         extra_modes=arm/arm-modes.def
2436         use_fixproto=yes
2437         ;;
2438 xscale-*-coff)
2439         tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/xscale-coff.h arm/arm.h"
2440         tmake_file="arm/t-arm arm/t-xscale-coff"
2441         out_file=arm/arm.c
2442         md_file=arm/arm.md
2443         extra_modes=arm/arm-modes.def
2444         use_fixproto=yes
2445         ;;
2446 xstormy16-*-elf)
2447         # For historical reasons, the target files omit the 'x'.
2448         tm_file="dbxelf.h elfos.h svr4.h stormy16/stormy16.h"
2449         tm_p_file=stormy16/stormy16-protos.h
2450         md_file=stormy16/stormy16.md
2451         out_file=stormy16/stormy16.c
2452         extra_options=stormy16/stormy16.opt
2453         tmake_file="stormy16/t-stormy16"
2454         extra_parts="crtbegin.o crtend.o"
2455         use_fixproto=yes
2456         ;;
2457 xtensa-*-elf*)
2458         tm_file="${tm_file} dbxelf.h elfos.h svr4.h xtensa/elf.h"
2459         tmake_file="xtensa/t-xtensa xtensa/t-elf"
2460         ;;
2461 xtensa-*-linux*)
2462         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h xtensa/linux.h"
2463         tmake_file="${tmake_file} xtensa/t-xtensa xtensa/t-linux"
2464         ;;
2465 am33_2.0-*-linux*)
2466         tm_file="mn10300/mn10300.h dbxelf.h elfos.h linux.h mn10300/linux.h"
2467         tmake_file="${tmake_file} mn10300/t-linux"
2468         gas=yes gnu_ld=yes
2469         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
2470         use_collect2=no
2471         ;;
2472 m32c-*-elf*)
2473         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
2474         c_target_objs="m32c-pragma.o"
2475         cxx_target_objs="m32c-pragma.o"
2476         use_fixproto=yes
2477         ;;
2478 *)
2479         echo "*** Configuration ${target} not supported" 1>&2
2480         exit 1
2481         ;;
2482 esac
2483
2484 case ${target} in
2485 i[34567]86-*-linux*aout* | i[34567]86-*-linux*libc1)
2486         tmake_file="${tmake_file} i386/t-gmm_malloc"
2487         ;;
2488 i[34567]86-*-linux* | x86_64-*-linux*)
2489         tmake_file="${tmake_file} i386/t-pmm_malloc"
2490         ;;
2491 i[34567]86-*-* | x86_64-*-*)
2492         tmake_file="${tmake_file} i386/t-gmm_malloc"
2493         ;;
2494 esac
2495
2496 # Support for --with-cpu and related options (and a few unrelated options,
2497 # too).
2498 case ${with_cpu} in
2499   yes | no)
2500     echo "--with-cpu must be passed a value" 1>&2
2501     exit 1
2502     ;;
2503 esac
2504
2505 # If there is no $with_cpu option, try to infer one from ${target}.
2506 # This block sets nothing except for with_cpu.
2507 if test x$with_cpu = x ; then
2508   case ${target} in
2509     ep9312-*-*)
2510       # A Cirrus ARM variant.
2511       with_cpu="ep9312"
2512       ;;
2513     i386-*-*)
2514       with_cpu=i386
2515       ;;
2516     i486-*-*)
2517       with_cpu=i486
2518       ;;
2519     i586-*-*)
2520       case ${target_noncanonical} in
2521         k6_2-*)
2522           with_cpu=k6-2
2523           ;;
2524         k6_3-*)
2525           with_cpu=k6-3
2526           ;;
2527         k6-*)
2528           with_cpu=k6
2529           ;;
2530         pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
2531           with_cpu=pentium-mmx
2532           ;;
2533         *)
2534           with_cpu=pentium
2535           ;;
2536       esac
2537       ;;
2538     i686-*-* | i786-*-*)
2539       case ${target_noncanonical} in
2540         k8-*|opteron-*|athlon_64-*)
2541           with_cpu=k8
2542           ;;
2543         athlon_xp-*|athlon_mp-*|athlon_4-*)
2544           with_cpu=athlon-4
2545           ;;
2546         athlon_tbird-*|athlon-*)
2547           with_cpu=athlon
2548           ;;
2549         pentium2-*)
2550           with_cpu=pentium2
2551           ;;
2552         pentium3-*|pentium3m-*)
2553           with_cpu=pentium3
2554           ;;
2555         pentium4-*|pentium4m-*)
2556           with_cpu=pentium4
2557           ;;
2558         prescott-*)
2559           with_cpu=prescott
2560           ;;
2561         nocona-*)
2562           with_cpu=nocona
2563           ;;
2564         pentium_m-*)
2565           with_cpu=pentium-m
2566           ;;
2567         pentiumpro-*)
2568           with_cpu=pentiumpro
2569           ;;
2570         *)
2571           with_cpu=generic
2572           ;;
2573       esac
2574       ;;
2575     x86_64-*-*)
2576       case ${target_noncanonical} in
2577         k8-*|opteron-*|athlon_64-*)
2578           with_cpu=k8
2579           ;;
2580         nocona-*)
2581           with_cpu=nocona
2582           ;;
2583         *)
2584           with_cpu=generic
2585           ;;
2586       esac
2587       ;;
2588     alphaev6[78]*-*-*)
2589       with_cpu=ev67
2590       ;;
2591     alphaev6*-*-*)
2592       with_cpu=ev6
2593       ;;
2594     alphapca56*-*-*)
2595       with_cpu=pca56
2596       ;;
2597     alphaev56*-*-*)
2598       with_cpu=ev56
2599       ;;
2600     alphaev5*-*-*)
2601       with_cpu=ev5
2602       ;;
2603     frv-*-*linux* | frv400-*-*linux*)
2604       with_cpu=fr400
2605       ;;
2606     frv550-*-*linux*)
2607       with_cpu=fr550
2608       ;;
2609     sparc*-*-*)
2610       with_cpu="`echo ${target} | sed 's/-.*$//'`"
2611       ;;
2612   esac
2613 fi
2614
2615 # Similarly for --with-float
2616 if test x$with_float = x; then
2617         case ${target} in
2618         ep9312-*-*)
2619                 with_float=hard
2620                 ;;
2621         esac
2622 fi
2623
2624 # Similarly for --with-schedule.
2625 if test x$with_schedule = x; then
2626         case ${target} in
2627         hppa1* | parisc1*)
2628                 # Override default PA8000 scheduling model.
2629                 with_schedule=7100LC
2630                 ;;
2631         esac
2632 fi
2633
2634 # Validate and mark as valid any --with options supported
2635 # by this target.  In order to use a particular --with option
2636 # you must list it in supported_defaults; validating the value
2637 # is optional.  This case statement should set nothing besides
2638 # supported_defaults.
2639
2640 supported_defaults=
2641 case "${target}" in
2642         alpha*-*-*)
2643                 supported_defaults="cpu tune"
2644                 for which in cpu tune; do
2645                         eval "val=\$with_$which"
2646                         case "$val" in
2647                         "" \
2648                         | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \
2649                         | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \
2650                         | 21264a)
2651                                 ;;
2652                         *)
2653                                 echo "Unknown CPU used in --with-$which=$val" 1>&2
2654                                 exit 1
2655                                 ;;
2656                         esac
2657                 done
2658                 ;;
2659
2660         arm*-*-*)
2661                 supported_defaults="arch cpu float tune fpu abi mode"
2662                 for which in cpu tune; do
2663                         # See if it matches any of the entries in arm-cores.def
2664                         eval "val=\$with_$which"
2665                         if [ x"$val" = x ] \
2666                             || grep "^ARM_CORE(\"$val\"," \
2667                                     ${srcdir}/config/arm/arm-cores.def \
2668                                     > /dev/null; then
2669                           # Ok
2670                           new_val=`grep "^ARM_CORE(\"$val\"," \
2671                                 ${srcdir}/config/arm/arm-cores.def | \
2672                                 sed -e 's/^[^,]*,[      ]*//' | \
2673                                 sed -e 's/,.*$//'`
2674                           eval "target_${which}_cname=$new_val"
2675                         echo "For $val real value is $new_val"
2676                           true
2677                         else
2678                           echo "Unknown CPU used in --with-$which=$val" 1>&2
2679                           exit 1
2680                         fi
2681                 done
2682
2683                 case "$with_arch" in
2684                 "" \
2685                 | armv[23456] | armv2a | armv3m | armv4t | armv5t \
2686                 | armv5te | armv6j |armv6k | armv6z | armv6zk \
2687                 | iwmmxt | ep9312)
2688                         # OK
2689                         ;;
2690                 *)
2691                         echo "Unknown arch used in --with-arch=$with_arch" 1>&2
2692                         exit 1
2693                         ;;
2694                 esac
2695
2696                 case "$with_float" in
2697                 "" \
2698                 | soft | hard | softfp)
2699                         # OK
2700                         ;;
2701                 *)
2702                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2703                         exit 1
2704                         ;;
2705                 esac
2706
2707                 case "$with_fpu" in
2708                 "" \
2709                 | fpa | fpe2 | fpe3 | maverick | vfp )
2710                         # OK
2711                         ;;
2712                 *)
2713                         echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1
2714                         exit 1
2715                         ;;
2716                 esac
2717
2718                 case "$with_abi" in
2719                 "" \
2720                 | apcs-gnu | atpcs | aapcs | iwmmxt )
2721                         #OK
2722                         ;;
2723                 *)
2724                         echo "Unknown ABI used in --with-abi=$with_abi"
2725                         exit 1
2726                         ;;
2727                 esac
2728
2729                 case "$with_mode" in
2730                 "" \
2731                 | arm | thumb )
2732                         #OK
2733                         ;;
2734                 *)
2735                         echo "Unknown mode used in --with-mode=$with_mode"
2736                         exit 1
2737                         ;;
2738                 esac
2739
2740                 if test "x$with_arch" != x && test "x$with_cpu" != x; then
2741                         echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2
2742                 fi
2743                 ;;
2744
2745         fr*-*-*linux*)
2746                 supported_defaults=cpu
2747                 case "$with_cpu" in
2748                 fr400) ;;
2749                 fr550) ;;
2750                 *)
2751                         echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
2752                         exit 1
2753                         ;;
2754                 esac
2755                 ;;
2756
2757         m68k*-linux*)
2758                 supported_defaults="cpu"
2759                 case "$with_cpu" in
2760                 "" | "m68020" | "m68030" | "m68040" | "m68060" | "m68020-40" | "m68020-60")
2761                         # OK
2762                         ;;
2763                 *)
2764                         echo "Unknown CPU used in --with-cpu=$with_cpu, known values:"  1>&2
2765                         echo "m68020 m68030 m68040 m68060 m68020-40 m68020-60" 1>&2
2766                         exit 1
2767                         ;;
2768                 esac
2769                 ;;
2770
2771         hppa*-*-* | parisc*-*-*)
2772                 supported_defaults="arch schedule"
2773
2774                 case "$with_arch" in
2775                 "" | 1.0 | 1.1 | 2.0)
2776                         # OK
2777                         ;;
2778                 *)
2779                         echo "Unknown architecture used in --with-arch=$with_arch" 1>&2
2780                         exit 1
2781                         ;;
2782                 esac
2783
2784                 case "$with_schedule" in
2785                 "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000)
2786                         # OK
2787                         ;;
2788                 *)
2789                         echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2
2790                         exit 1
2791                         ;;
2792                 esac
2793                 ;;
2794
2795         i[34567]86-*-* | x86_64-*-*)
2796                 supported_defaults="arch cpu tune"
2797                 for which in arch cpu tune; do
2798                         eval "val=\$with_$which"
2799                         case ${val} in
2800                         i386 | i486 \
2801                         | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \
2802                         | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
2803                         | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
2804                         | athlon-4 | athlon-xp | athlon-mp \
2805                         | prescott | pentium-m | pentium4m | pentium3m)
2806                                 case "${target}" in
2807                                   x86_64-*-*)
2808                                       echo "CPU given in --with-$which=$val doesn't support 64bit mode." 1>&2
2809                                       exit 1
2810                                       ;;
2811                                 esac
2812                                 # OK
2813                                 ;;
2814                         "" | k8 | opteron | athlon64 | athlon-fx | nocona | generic)
2815                                 # OK
2816                                 ;;
2817                         *)
2818                                 echo "Unknown CPU given in --with-$which=$val." 1>&2
2819                                 exit 1
2820                                 ;;
2821                         esac
2822                 done
2823                 ;;
2824
2825         mips*-*-*)
2826                 supported_defaults="abi arch float tune divide"
2827
2828                 case ${with_float} in
2829                 "" | soft | hard)
2830                         # OK
2831                         ;;
2832                 *)
2833                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2834                         exit 1
2835                         ;;
2836                 esac
2837
2838                 case ${with_abi} in
2839                 "" | 32 | o64 | n32 | 64 | eabi)
2840                         # OK
2841                         ;;
2842                 *)
2843                         echo "Unknown ABI used in --with-abi=$with_abi" 1>&2
2844                         exit 1
2845                         ;;
2846                 esac
2847
2848                 case ${with_divide} in
2849                 "" | breaks | traps)
2850                         # OK
2851                         ;;
2852                 *)
2853                         echo "Unknown division check type use in --with-divide=$with_divide" 1>&2
2854                         exit 1
2855                 esac
2856                 ;;
2857
2858         mt-*-*)
2859                 supported_defaults="arch"
2860
2861                 case "$with_arch" in
2862                 "" \
2863                 | ms1-64-001 \
2864                 | ms1-16-002 \
2865                 | ms1-16-003 \
2866                 | ms2 \
2867                 | "")
2868                         # OK
2869                         ;;
2870                 *)
2871                         echo "Unknown arch used in --with-arch=$with_arch" 1>&2
2872                         exit 1
2873                         ;;
2874                 esac
2875                 ;;
2876
2877         powerpc*-*-* | rs6000-*-*)
2878                 supported_defaults="cpu float tune"
2879
2880                 for which in cpu tune; do
2881                         eval "val=\$with_$which"
2882                         case ${val} in
2883                         default32 | default64)
2884                                 with_which="with_$which"
2885                                 eval $with_which=
2886                                 ;;
2887                         405cr)
2888                                 tm_defines="${tm_defines} CONFIG_PPC405CR"
2889                                 eval "with_$which=405"
2890                                 ;;
2891                         "" | common \
2892                         | power | power[23456] | power6x | powerpc | powerpc64 \
2893                         | rios | rios1 | rios2 | rsc | rsc1 | rs64a \
2894                         | 401 | 403 | 405 | 405fp | 440 | 440fp | 505 \
2895                         | 601 | 602 | 603 | 603e | ec603e | 604 \
2896                         | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
2897                         | 854[08] | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5)
2898                                 # OK
2899                                 ;;
2900                         *)
2901                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
2902                                 exit 1
2903                                 ;;
2904                         esac
2905                 done
2906                 ;;
2907
2908         s390*-*-*)
2909                 supported_defaults="arch mode tune"
2910
2911                 for which in arch tune; do
2912                         eval "val=\$with_$which"
2913                         case ${val} in
2914                         "" | g5 | g6 | z900 | z990 | z9-109)
2915                                 # OK
2916                                 ;;
2917                         *)
2918                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
2919                                 exit 1
2920                                 ;;
2921                         esac
2922                 done
2923
2924                 case ${with_mode} in
2925                 "" | esa | zarch)
2926                         # OK
2927                         ;;
2928                 *)
2929                         echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2
2930                         exit 1
2931                         ;;
2932                 esac
2933                 ;;
2934
2935         sh[123456ble]-*-* | sh-*-*)
2936                 supported_defaults="cpu"
2937                 case "`echo $with_cpu | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz- | sed s/sh/m/`" in
2938                 "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu )
2939                         # OK
2940                         ;;
2941                 m2a | m2a-single | m2a-single-only | m2a-nofpu)
2942                         ;;
2943                 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al)
2944                         ;;
2945                 *)
2946                         echo "Unknown CPU used in --with-cpu=$with_cpu, known values:"  1>&2
2947                         echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2
2948                         echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2
2949                         echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2
2950                         exit 1
2951                         ;;
2952                 esac
2953                 ;;
2954         sparc*-*-*)
2955                 supported_defaults="cpu float tune"
2956
2957                 for which in cpu tune; do
2958                         eval "val=\$with_$which"
2959                         case ${val} in
2960                         "" | sparc | sparcv9 | sparc64 | sparc86x \
2961                         | v7 | cypress | v8 | supersparc | sparclite | f930 \
2962                         | f934 | hypersparc | sparclite86x | sparclet | tsc701 \
2963                         | v9 | ultrasparc | ultrasparc3 | niagara)
2964                                 # OK
2965                                 ;;
2966                         *)
2967                                 echo "Unknown cpu used in --with-$which=$val" 1>&2
2968                                 exit 1
2969                                 ;;
2970                         esac
2971                 done
2972
2973                 case ${with_float} in
2974                 "" | soft | hard)
2975                         # OK
2976                         ;;
2977                 *)
2978                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2979                         exit 1
2980                         ;;
2981                 esac
2982                 ;;
2983
2984         v850*-*-*)
2985                 supported_defaults=cpu
2986                 case ${with_cpu} in
2987                 "" | v850e | v850e1)
2988                         # OK
2989                         ;;
2990                 *)
2991                         echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
2992                         exit 1
2993                         ;;
2994                 esac
2995                 ;;
2996 esac
2997
2998 # Set some miscellaneous flags for particular targets.
2999 target_cpu_default2=
3000 case ${target} in
3001         alpha*-*-*)
3002                 if test x$gas = xyes
3003                 then
3004                         target_cpu_default2="MASK_GAS"
3005                 fi
3006                 ;;
3007
3008         arm*-*-*)
3009                 if test x$target_cpu_cname = x
3010                 then
3011                         target_cpu_default2=TARGET_CPU_generic
3012                 else
3013                         target_cpu_default2=TARGET_CPU_$target_cpu_cname
3014                 fi
3015                 ;;
3016
3017         m68k*-linux*)
3018                 case "x$with_cpu" in
3019                 x)
3020                         # The most generic
3021                         target_cpu_default2="(MASK_68020|MASK_68881|MASK_BITFIELD)"
3022                         ;;
3023                 xm68020)
3024                         target_cpu_default2="(MASK_68020|MASK_68881|MASK_BITFIELD)"
3025                         ;;
3026                 xm68030)
3027                         target_cpu_default2="(MASK_68030|MASK_68020|MASK_68881|MASK_BITFIELD)"
3028                         ;;
3029                 xm68040)
3030                         target_cpu_default2="(MASK_68040|MASK_68040_ONLY|MASK_68020|MASK_68881|MASK_BITFIELD)"
3031                         ;;
3032                 xm68060)
3033                         target_cpu_default2="(MASK_68060|MASK_68040_ONLY|MASK_68020|MASK_68881|MASK_BITFIELD)"
3034                         ;;
3035                 xm68020-40)
3036                         target_cpu_default2="(MASK_BITFIELD|MASK_68881|MASK_68020|MASK_68040)"
3037                         ;;
3038                 xm68020-60)
3039                         target_cpu_default2="(MASK_BITFIELD|MASK_68881|MASK_68020|MASK_68040|MASK_68060)"
3040                         ;;
3041                 *)
3042                         echo "Unknown CPU used in --with-cpu=$with_cpu"  1>&2
3043                         exit 1
3044                         ;;
3045                 esac
3046                 ;;
3047
3048         hppa*-*-* | parisc*-*-*)
3049                 target_cpu_default2="MASK_BIG_SWITCH"
3050                 if test x$gas = xyes
3051                 then
3052                         target_cpu_default2="${target_cpu_default2}|MASK_GAS|MASK_JUMP_IN_DELAY"
3053                 fi
3054                 ;;
3055
3056         mips*-*-*)
3057                 if test x$gnu_ld = xyes
3058                 then
3059                         target_cpu_default2="MASK_SPLIT_ADDRESSES"
3060                 fi
3061                 case ${target} in
3062                         mips*el-*-*)
3063                                 tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
3064                                 ;;
3065                 esac
3066                 if test "x$enable_gofast" = xyes
3067                 then
3068                         tm_defines="US_SOFTWARE_GOFAST $tm_defines"
3069                         tmake_file="mips/t-gofast $tmake_file"
3070                 else
3071                         tmake_file="mips/t-mips $tmake_file"
3072                 fi
3073                 ;;
3074
3075         powerpc*-*-* | rs6000-*-*)
3076                 # FIXME: The PowerPC port uses the value set at compile time,
3077                 # although it's only cosmetic.
3078                 if test "x$with_cpu" != x
3079                 then
3080                         target_cpu_default2="\\\"$with_cpu\\\""
3081                 fi
3082                 out_file=rs6000/rs6000.c
3083                 c_target_objs="${c_target_objs} rs6000-c.o"
3084                 cxx_target_objs="${cxx_target_objs} rs6000-c.o"
3085                 tmake_file="rs6000/t-rs6000 ${tmake_file}"
3086
3087                 if test x$enable_e500_double = xyes
3088                 then
3089                         tm_file="$tm_file rs6000/e500-double.h"
3090                 fi
3091                 ;;
3092
3093         sh[123456ble]*-*-* | sh-*-*)
3094                 c_target_objs="${c_target_objs} sh-c.o"
3095                 cxx_target_objs="${cxx_target_objs} sh-c.o"
3096                 ;;
3097
3098         sparc*-*-*)
3099                 # Some standard aliases.
3100                 case x$with_cpu in
3101                 xsparc)
3102                         with_cpu=v7
3103                         ;;
3104                 xsparcv9 | xsparc64)
3105                         with_cpu=v9
3106                         ;;
3107                 esac
3108
3109                 # The SPARC port checks this value at compile-time.
3110                 target_cpu_default2="TARGET_CPU_$with_cpu"
3111                 ;;
3112         v850*-*-*)
3113                 # FIXME: The v850 is "special" in that it does not support
3114                 # runtime CPU selection, only --with-cpu.
3115                 case "x$with_cpu" in
3116                 x)
3117                         ;;
3118                 xv850e)
3119                         target_cpu_default2="TARGET_CPU_$with_cpu"
3120                         ;;
3121                 esac
3122                 ;;
3123 esac
3124
3125 t=
3126 all_defaults="abi cpu arch tune schedule float mode fpu divide"
3127 for option in $all_defaults
3128 do
3129         eval "val=\$with_$option"
3130         if test -n "$val"; then
3131                 case " $supported_defaults " in
3132                 *" $option "*)
3133                         ;;
3134                 *)
3135                         echo "This target does not support --with-$option." 2>&1
3136                         echo "Valid --with options are: $supported_defaults" 2>&1
3137                         exit 1
3138                         ;;
3139                 esac
3140
3141                 if test "x$t" = x
3142                 then
3143                         t="{ \"$option\", \"$val\" }"
3144                 else
3145                         t="${t}, { \"$option\", \"$val\" }"
3146                 fi
3147         fi
3148 done
3149
3150 if test "x$t" = x
3151 then
3152         configure_default_options="{ { NULL, NULL} }"
3153 else
3154         configure_default_options="{ ${t} }"
3155 fi
3156
3157 if test "$target_cpu_default2" != ""
3158 then
3159         if test "$target_cpu_default" != ""
3160         then
3161                 target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
3162         else
3163                 target_cpu_default=$target_cpu_default2
3164         fi
3165 fi