OSDN Git Service

/
[pf3gnuchains/gcc-fork.git] / gcc / config.gcc
1 # GCC target-specific configuration file.
2 # Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
3 # Free Software Foundation, Inc.
4
5 #This file is part of GCC.
6
7 #GCC is free software; you can redistribute it and/or modify it under
8 #the terms of the GNU General Public License as published by the Free
9 #Software Foundation; either version 2, or (at your option) any later
10 #version.
11
12 #GCC is distributed in the hope that it will be useful, but WITHOUT
13 #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 #FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
15 #for more details.
16
17 #You should have received a copy of the GNU General Public License
18 #along with GCC; see the file COPYING.  If not, write to the Free
19 #Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
20 #02110-1301, USA.
21
22 # This is the GCC target-specific configuration file
23 # where a configuration type is mapped to different system-specific
24 # definitions and files.  This is invoked by the autoconf-generated
25 # configure script.  Putting it in a separate shell file lets us skip
26 # running autoconf when modifying target-specific information.
27
28 # This file switches on the shell variable ${target}, and also uses the
29 # following shell variables:
30 #
31 #  with_*               Various variables as set by configure.
32 #
33 #  enable_threads       Either the name, yes or no depending on whether
34 #                       threads support was requested.
35 #
36 #  default_use_cxa_atexit
37 #                       "no" by default, can be set to "yes" if a target
38 #                       wishes to use __cxa_atexit() by default if the
39 #                       $enable___cxa_atexit variable is not set.
40 #
41 #  gas_flag             Either yes or no depending on whether GNU as was
42 #                       requested.
43 #
44 #  gnu_ld_flag          Either yes or no depending on whether GNU ld was
45 #                       requested.
46
47 # This file sets the following shell variables for use by the
48 # autoconf-generated configure script:
49 #
50 #  cpu_type             The name of the cpu, if different from the first
51 #                       chunk of the canonical target name.
52 #
53 #  tm_defines           List of target macros to define for all compilations.
54 #
55 #  tm_file              A list of target macro files, if different from
56 #                       "$cpu_type/$cpu_type.h". Usually it's constructed
57 #                       per target in a way like this:
58 #                       tm_file="${tm_file} dbxelf.h elfos.h svr4.h ${cpu_type.h}/elf.h"
59 #                       Note that the preferred order is:
60 #                       - specific target header "${cpu_type}/${cpu_type.h}"
61 #                       - generic headers like dbxelf.h elfos.h, etc.
62 #                       - specializing target headers like ${cpu_type.h}/elf.h
63 #                       This helps to keep OS specific stuff out of the CPU
64 #                       defining header ${cpu_type}/${cpu_type.h}.
65 #
66 #  tm_p_file            Location of file with declarations for functions
67 #                       in $out_file.
68 #
69 #  out_file             The name of the machine description C support
70 #                       file, if different from "$cpu_type/$cpu_type.c".
71 #
72 #  md_file              The name of the machine-description file, if
73 #                       different from "$cpu_type/$cpu_type.md".
74 #
75 #  tmake_file           A list of machine-description-specific
76 #                       makefile-fragments, if different from
77 #                       "$cpu_type/t-$cpu_type".
78 #
79 #  extra_modes          The name of the file containing a list of extra
80 #                       machine modes, if necessary and different from
81 #                       "$cpu_type/$cpu_type-modes.def".
82 #
83 #  extra_objs           List of extra objects that should be linked into
84 #                       the compiler proper (cc1, cc1obj, cc1plus)
85 #                       depending on target.
86 #
87 #  extra_gcc_objs       List of extra objects that should be linked into
88 #                       the compiler driver (gcc) depending on target.
89 #
90 #  extra_headers        List of used header files from the directory
91 #                       config/${cpu_type}.
92 #
93 #  extra_passes         List of extra executables compiled for this target
94 #                       machine, used for compiling from source to object.
95 #
96 #  extra_parts          List of extra object files that should be compiled
97 #                       for this target machine.
98 #
99 #  extra_programs       Like extra_passes, but these are used when linking.
100 #
101 #  extra_options        List of target-dependent .opt files.
102 #
103 #  c_target_objs        List of extra target-dependent objects that be
104 #                       linked into the C compiler only.
105 #
106 #  cxx_target_objs      List of extra target-dependent objects that be
107 #                       linked into the C++ compiler only.
108 #
109 #  target_gtfiles       List of extra source files with type information.
110 #
111 #  xm_defines           List of macros to define when compiling for the
112 #                       target machine.
113 #
114 #  xm_file              List of files to include when compiling for the
115 #                       target machine.
116 #
117 #  use_collect2         Set to yes or no, depending on whether collect2
118 #                       will be used.
119 #
120 #  target_cpu_default   Set to override the default target model.
121 #
122 #  gdb_needs_out_file_path
123 #                       Set to yes if gdb needs a dir command with
124 #                       `dirname $out_file`.
125 #
126 #  thread_file          Set to control which thread package to use.
127 #
128 #  gas                  Set to yes or no depending on whether the target
129 #                       system normally uses GNU as.
130 #
131 #  need_64bit_hwint     Set to yes if HOST_WIDE_INT must be 64 bits wide
132 #                       for this target.  This is true iff this target
133 #                       supports "long" or "wchar_t" wider than 32 bits.
134 #
135 #  configure_default_options
136 #                       Set to an initializer for configure_default_options
137 #                       in configargs.h, based on --with-cpu et cetera.
138 #
139 #  use_fixproto         Set to "yes" if fixproto should be run normally,
140 #                       "no" if fixproto should never be run.
141
142 # The following variables are used in each case-construct to build up the
143 # outgoing variables:
144 #
145 #  gnu_ld               Set to yes or no depending on whether the target
146 #                       system normally uses GNU ld.
147
148 out_file=
149 tmake_file=
150 extra_headers=
151 extra_passes=
152 extra_parts=
153 extra_programs=
154 extra_objs=
155 extra_gcc_objs=
156 extra_options=
157 c_target_objs=
158 cxx_target_objs=
159 tm_defines=
160 xm_defines=
161 # Set this to force installation and use of collect2.
162 use_collect2=
163 # Set this to override the default target model.
164 target_cpu_default=
165 # Set this if gdb needs a dir command with `dirname $out_file`
166 gdb_needs_out_file_path=
167 # Set this to control which thread package will be used.
168 thread_file=
169 # Reinitialize these from the flag values every loop pass, since some
170 # configure entries modify them.
171 gas="$gas_flag"
172 gnu_ld="$gnu_ld_flag"
173 default_use_cxa_atexit=no
174 target_gtfiles=
175 need_64bit_hwint=
176
177 # Default to not using fixproto.  Targets which need fixproto should
178 # specifically set this to 'yes'.
179 use_fixproto=no
180
181 # Don't carry these over build->host->target.  Please.
182 xm_file=
183 md_file=
184
185 # Obsolete configurations.
186 case ${target} in
187    c4x-*                \
188  | tic4x-*              \
189  )
190     if test "x$enable_obsolete" != xyes; then
191       echo "*** Configuration ${target} is obsolete." >&2
192       echo "*** Specify --enable-obsolete to build it anyway." >&2
193       echo "*** Support will be REMOVED in the next major release of GCC," >&2
194       echo "*** unless a maintainer comes forward." >&2
195       exit 1
196     fi;;
197 esac
198
199 # Unsupported targets list.  Do not put an entry in this list unless
200 # it would otherwise be caught by a more permissive pattern.  The list
201 # should be in alphabetical order.
202 case ${target} in
203    alpha*-*-linux*libc1*                \
204  | i[34567]86-sequent-sysv              \
205  | i[34567]86-sequent-sysv[123]*        \
206  | i[34567]86-go32-*                    \
207  | i[34567]86-*-go32*                   \
208  | m68k-*-linux*aout*                   \
209  | m68k-*-linux*libc1*                  \
210  | mips64orion*-*-rtems*                \
211  | powerpc-*-linux*libc1*               \
212  | sparc-*-linux*aout*                  \
213  | sparc-*-linux*libc1*                 \
214  | sparc-hal-solaris2*                  \
215  | thumb-*-*                            \
216  | *-*-linux*coff*                      \
217  | *-*-linux*oldld*                     \
218  | *-*-rtemsaout*                       \
219  | *-*-rtemscoff*                       \
220  | vax-*-vms*                           \
221  )
222         echo "*** Configuration ${target} not supported" 1>&2
223         exit 1
224         ;;
225 esac
226
227 # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
228 # updated in each machine entry.  Also set default extra_headers for some
229 # machines.
230 tm_p_file=
231 cpu_type=`echo ${target} | sed 's/-.*$//'`
232 cpu_is_64bit=
233 case ${target} in
234 m32c*-*-*)
235         cpu_type=m32c
236         tmake_file=m32c/t-m32c
237         ;;
238 alpha*-*-*)
239         cpu_type=alpha
240         need_64bit_hwint=yes
241         ;;
242 am33_2.0-*-linux*)
243         cpu_type=mn10300
244         ;;
245 strongarm*-*-*)
246         cpu_type=arm
247         ;;
248 arm*-*-*)
249         cpu_type=arm
250         extra_headers="mmintrin.h"
251         ;;
252 bfin*-*)
253         cpu_type=bfin
254         ;;
255 ep9312*-*-*)
256         cpu_type=arm
257         ;;
258 frv*)   cpu_type=frv
259         ;;
260 xscale-*-*)
261         cpu_type=arm
262         extra_headers="mmintrin.h"
263         ;;
264 i[34567]86-*-*)
265         cpu_type=i386
266         extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h pmmintrin.h"
267         ;;
268 x86_64-*-*)
269         cpu_type=i386
270         extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h pmmintrin.h"
271         need_64bit_hwint=yes
272         ;;
273 ia64-*-*)
274         extra_headers=ia64intrin.h
275         need_64bit_hwint=yes
276         ;;
277 hppa*-*-* | parisc*-*-*)
278         cpu_type=pa
279         ;;
280 m32r*-*-*)
281         cpu_type=m32r
282         ;;
283 m680[012]0-*-*)
284         cpu_type=m68k
285         extra_headers=math-68881.h
286         ;;
287 m68k-*-*)
288         extra_headers=math-68881.h
289         ;;
290 mips*-*-*)
291         cpu_type=mips
292         need_64bit_hwint=yes
293         ;;
294 powerpc*-*-*)
295         cpu_type=rs6000
296         extra_headers="ppc-asm.h altivec.h spe.h"
297         need_64bit_hwint=yes
298         case x$with_cpu in
299             xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[345]|xrs64a)
300                 cpu_is_64bit=yes
301                 ;;
302         esac
303         ;;
304 rs6000*-*-*)
305         need_64bit_hwint=yes
306         ;;
307 sparc64*-*-*)
308         cpu_type=sparc
309         need_64bit_hwint=yes
310         ;;
311 sparc*-*-*)
312         cpu_type=sparc
313         ;;
314 s390*-*-*)
315         cpu_type=s390
316         need_64bit_hwint=yes
317         ;;
318 # Note the 'l'; we need to be able to match e.g. "shle" or "shl".
319 sh[123456789lbe]*-*-*)
320         cpu_type=sh
321         need_64bit_hwint=yes
322         ;;
323 tic4x-*-*)
324         cpu_type=c4x
325         ;;
326 esac
327
328 tm_file=${cpu_type}/${cpu_type}.h
329 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
330 then
331         tm_p_file=${cpu_type}/${cpu_type}-protos.h
332 fi
333 extra_modes=
334 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
335 then
336         extra_modes=${cpu_type}/${cpu_type}-modes.def
337 fi
338 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt
339 then
340         extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt"
341 fi
342
343 case ${target} in
344 x86_64-*-*)
345         tm_file="i386/biarch64.h ${tm_file}"
346         ;;
347 esac
348
349 # On a.out targets, we need to use collect2.
350 case ${target} in
351 *-*-*aout*)
352         use_collect2=yes
353         ;;
354 esac
355
356 # Common parts for widely ported systems.
357 case ${target} in
358 *-*-darwin*)
359   tm_file="${tm_file} darwin.h ${cpu_type}/darwin.h"
360   tm_p_file="${tm_p_file} darwin-protos.h"
361   tmake_file="t-darwin ${cpu_type}/t-darwin t-slibgcc-darwin"
362   target_gtfiles="\$(srcdir)/config/darwin.c"
363   extra_options="${extra_options} darwin.opt"
364   c_target_objs="darwin-c.o"
365   cxx_target_objs="darwin-c.o"
366   extra_parts="crt2.o"
367   extra_objs="darwin.o"
368   case ${enable_threads} in
369     "" | yes | posix) thread_file='posix' ;;
370   esac
371   ;;
372 *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
373   # This is the place-holder for the generic a.out configuration
374   # of FreeBSD.  No actual configuration resides here since
375   # there was only ever a bare-bones ix86 configuration for
376   # a.out and it exists solely in the machine-specific section.
377   # This place-holder must exist to avoid dropping into
378   # the generic ELF configuration of FreeBSD (i.e. it must be
379   # ordered before that section).
380   ;;
381 *-*-freebsd*)
382   # This is the generic ELF configuration of FreeBSD.  Later
383   # machine-specific sections may refine and add to this
384   # configuration.
385   #
386   # Due to tm_file entry ordering issues that vary between cpu
387   # architectures, we only define fbsd_tm_file to allow the
388   # machine-specific section to dictate the final order of all
389   # entries of tm_file with the minor exception that components
390   # of the tm_file set here will always be of the form:
391   #
392   # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
393   #
394   # The machine-specific section should not tamper with this
395   # ordering but may order all other entries of tm_file as it
396   # pleases around the provided core setting.
397   gas=yes
398   gnu_ld=yes
399   extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
400   case ${target} in
401     *-*-freebsd3 | *-*-freebsd[3].*)
402       tm_defines="${tm_defines} FBSD_MAJOR=3" ;;
403     *-*-freebsd4 | *-*-freebsd[4].*)
404       tm_defines="${tm_defines} FBSD_MAJOR=4" ;;
405     *-*-freebsd5 | *-*-freebsd[5].*)
406       tm_defines="${tm_defines} FBSD_MAJOR=5" ;;
407     *-*-freebsd6 | *-*-freebsd[6].*)
408       tm_defines="${tm_defines} FBSD_MAJOR=6" ;;
409     *-*-freebsd7 | *-*-freebsd[7].*)
410       tm_defines="${tm_defines} FBSD_MAJOR=7" ;;
411     *-*-freebsd8 | *-*-freebsd[8].*)
412       tm_defines="${tm_defines} FBSD_MAJOR=8" ;;
413     *-*-freebsd9 | *-*-freebsd[9].*)
414       tm_defines="${tm_defines} FBSD_MAJOR=9" ;;
415     *)
416       echo 'Please update *-*-freebsd* in gcc/config.gcc'
417       exit 1
418       ;;
419   esac
420   tmake_file="t-slibgcc-elf-ver t-freebsd"
421   case ${enable_threads} in
422     no)
423       fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
424       ;;
425     "" | yes | posix)
426       thread_file='posix'
427       tmake_file="${tmake_file} t-freebsd-thread"
428       # Before 5.0, FreeBSD can't bind shared libraries to -lc
429       # when "optionally" threaded via weak pthread_* checks.
430       case ${target} in
431         *-*-freebsd[34] | *-*-freebsd[34].*)
432           tmake_file="${tmake_file} t-slibgcc-nolc-override"
433           ;;
434       esac
435       ;;
436     *) 
437       echo 'Unknown thread configuration for FreeBSD'
438       exit 1
439       ;;
440   esac
441   fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h"
442   ;;
443 *-*-linux*libc1* | *-*-linux*aout*)
444   # Avoid the generic linux case.
445   ;;
446 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu)
447   # Must come before *-*-gnu* (because of *-*-linux-gnu* systems).
448   extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
449   gas=yes
450   gnu_ld=yes
451   case ${enable_threads} in
452     "" | yes | posix) thread_file='posix' ;;
453   esac
454   tmake_file="t-slibgcc-elf-ver t-linux"
455   ;;
456 *-*-gnu*)
457   # On the Hurd, the setup is just about the same on
458   # each different CPU.  The specific machines that we
459   # support are matched above and just set $cpu_type.
460   tm_file="${cpu_type}/gnu.h"
461   extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
462   # GNU tools are the only tools.
463   gas=yes
464   gnu_ld=yes
465   # These details are the same as for Linux.
466   # But here we need a little extra magic.
467   tmake_file="t-slibgcc-elf-ver t-linux t-gnu"
468   case ${target} in
469     alpha*)
470       tm_file="${cpu_type}/${cpu_type}.h alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h ${tm_file}"
471       ;;
472     i[34567]86-*-*)
473       tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h gnu.h ${tm_file}"
474       ;;
475   esac
476   ;;
477 *-*-netbsd*)
478   tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd t-libgcc-pic"
479   gas=yes
480   gnu_ld=yes
481
482   # NetBSD 2.0 and later get POSIX threads enabled by default.
483   # Allow them to be explicitly enabled on any other version.
484   case ${enable_threads} in
485     "")
486       case ${target} in
487         *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
488           thread_file='posix'
489           tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
490           ;;
491       esac
492       ;;
493     yes | posix)
494       thread_file='posix'
495       tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
496       ;;
497   esac
498
499   # NetBSD 1.7 and later are set up to use GCC's crtstuff for
500   # ELF configurations.  We will clear extra_parts in the
501   # a.out configurations.
502   case ${target} in
503     *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
504       extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
505       ;;
506   esac
507
508   # NetBSD 2.0 and later provide __cxa_atexit(), which we use by
509   # default (unless overridden by --disable-__cxa_atexit).
510   case ${target} in
511     *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
512       default_use_cxa_atexit=yes
513       ;;
514   esac
515   ;;
516 *-*-openbsd*)
517   tmake_file="t-libc-ok t-openbsd t-libgcc-pic"
518   case ${enable_threads} in
519     yes)
520       thread_file='posix'
521       tmake_file="${tmake_file} t-openbsd-thread"
522       ;;
523   esac
524   case ${target} in
525     *-*-openbsd2.*|*-*-openbsd3.[012])
526       tm_defines="${tm_defines} HAS_LIBC_R=1" ;;
527   esac
528   ;;
529 *-*-rtems*)
530   case ${enable_threads} in
531     yes) thread_file='rtems' ;;
532   esac
533   ;;
534 *-*-vxworks*)
535   tmake_file=t-vxworks
536   tm_file="${tm_file} elfos.h svr4.h"
537   xm_defines=POSIX
538   extra_options="${extra_options} vxworks.opt"
539   case ${enable_threads} in
540     no) ;;
541     "" | yes | vxworks) thread_file='vxworks' ;;
542     *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
543   esac
544   ;;
545 esac
546
547 case ${target} in
548 # Support site-specific machine types.
549 *local*)
550         rest=`echo ${target} | sed -e "s/$cpu_type-//"`
551         tm_file=${cpu_type}/$rest.h
552         if test -f $srcdir/config/${cpu_type}/xm-$rest.h
553         then xm_file=${cpu_type}/xm-$rest.h
554         fi
555         if test -f $srcdir/config/${cpu_type}/t-$rest
556         then tmake_file=${cpu_type}/t-$rest
557         fi
558         ;;
559 alpha*-*-unicosmk*)
560         use_collect2=yes
561         tm_file="${tm_file} alpha/unicosmk.h"
562
563         # Don't include t-ieee for now because we don't support that yet
564         # tmake_file="alpha/t-ieee"
565         tmake_file="alpha/t-unicosmk"
566         use_fixproto=yes
567         ;;
568 alpha*-*-linux*)
569         tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
570         target_cpu_default="MASK_GAS"
571         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
572         ;;
573 alpha*-*-gnu*)
574         target_cpu_default="MASK_GAS"
575         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
576         ;;
577 alpha*-*-freebsd*)
578         tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
579         target_cpu_default="MASK_GAS"
580         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
581         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
582         ;;
583 alpha*-*-netbsd*)
584         tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
585         target_cpu_default="MASK_GAS"
586         tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
587         ;;
588 alpha*-*-openbsd*)
589         tm_defines="OBSD_NO_DYNAMIC_LIBRARIES OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
590         tm_file="alpha/alpha.h openbsd.h alpha/openbsd.h"
591         # default x-alpha is only appropriate for dec-osf.
592         target_cpu_default="MASK_GAS"
593         tmake_file="alpha/t-alpha alpha/t-ieee"
594         ;;
595 alpha*-dec-osf[45]*)
596         if test x$stabs = xyes
597         then
598                 tm_file="${tm_file} dbx.h"
599         fi
600         if test x$gas != xyes
601         then
602                 extra_passes="mips-tfile mips-tdump"
603         fi
604         use_collect2=yes
605         tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf4"
606         tm_file="${tm_file} alpha/osf.h"
607         extra_headers=va_list.h
608         case ${target} in
609           *-*-osf4*)
610             # Define TARGET_SUPPORT_ARCH except on 4.0a.
611             case ${target} in
612                 *-*-osf4.0a) ;;
613                 *) tm_defines="TARGET_SUPPORT_ARCH=1"
614             esac
615             ;;
616           *-*-osf5*)
617             tm_file="${tm_file} alpha/osf5.h"
618             tm_defines="TARGET_SUPPORT_ARCH=1"
619             ;;
620         esac
621         case ${enable_threads} in
622           "" | yes | posix)
623             thread_file='posix'
624             tmake_file="${tmake_file} alpha/t-osf-pthread"
625             ;;
626         esac
627         ;;
628 alpha64-dec-*vms*)
629         tm_file="${tm_file} alpha/vms.h alpha/vms64.h"
630         xm_file="alpha/xm-vms.h"
631         tmake_file="alpha/t-alpha alpha/t-vms alpha/t-vms64 alpha/t-ieee"
632         prefix=/gnu
633         local_prefix=/gnu
634         ;;
635 alpha*-dec-*vms*)
636         tm_file="${tm_file} alpha/vms.h"
637         xm_file=alpha/xm-vms.h
638         tmake_file="alpha/t-alpha alpha/t-vms alpha/t-ieee"
639         prefix=/gnu
640         local_prefix=/gnu
641         ;;
642 arc-*-elf*)
643         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
644         extra_parts="crtinit.o crtfini.o"
645         use_fixproto=yes
646         ;;
647 arm-*-coff* | armel-*-coff*)
648         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h"
649         tmake_file="arm/t-arm arm/t-arm-coff"
650         ;;
651 arm-semi-aof | armel-semi-aof)
652         tm_file="arm/semiaof.h arm/aof.h arm/arm.h"
653         tmake_file="arm/t-arm arm/t-semi"
654         ;;
655 arm-wrs-vxworks)
656         tm_file="dbxelf.h elfos.h svr4.h vxworks.h arm/elf.h arm/aout.h arm/arm.h arm/vxworks.h"
657         tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
658         ;;
659 arm*-*-freebsd*|strongarm*-*-freebsd*)
660         tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
661         tmake_file="${tmake_file} arm/t-arm arm/t-strongarm-elf"
662         ;;
663 arm*-*-netbsdelf*)
664         tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
665         tmake_file="${tmake_file} arm/t-arm arm/t-netbsd"
666         ;;
667 arm*-*-netbsd*)
668         tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h"
669         tmake_file="t-netbsd arm/t-arm arm/t-netbsd"
670         extra_parts=""
671         use_collect2=yes
672         ;;
673 arm*-*-linux*)                  # ARM GNU/Linux with ELF
674         tm_file="dbxelf.h elfos.h linux.h arm/elf.h arm/linux-gas.h arm/linux-elf.h" 
675         tmake_file="${tmake_file} t-linux arm/t-arm"
676         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
677         gnu_ld=yes
678         case ${target} in
679         arm*-*-linux-gnueabi)
680             tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h"
681             tmake_file="$tmake_file arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi"
682             # The BPABI long long divmod functions return a 128-bit value in 
683             # registers r0-r3.  Correctly modeling that requires the use of
684             # TImode.
685             need_64bit_hwint=yes
686             # The EABI requires the use of __cxa_atexit.
687             default_use_cxa_atexit=yes
688             ;;
689         *)
690             tmake_file="$tmake_file arm/t-linux"
691             ;;
692         esac
693         tm_file="$tm_file arm/aout.h arm/arm.h"
694         ;;
695 arm*-*-uclinux*)                # ARM ucLinux
696         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/linux-gas.h arm/linux-elf.h arm/uclinux-elf.h"
697         tmake_file="arm/t-arm arm/t-arm-elf"
698         ;;
699 arm*-*-ecos-elf)
700         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
701         tmake_file="arm/t-arm arm/t-arm-elf"
702         ;;
703 arm*-*-eabi* | arm*-*-symbianelf* )
704         # The BPABI long long divmod functions return a 128-bit value in 
705         # registers r0-r3.  Correctly modeling that requires the use of
706         # TImode.
707         need_64bit_hwint=yes
708         default_use_cxa_atexit=yes
709         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
710         tmake_file="arm/t-arm arm/t-arm-elf"
711         case ${target} in
712         arm*-*-eabi*)
713           tmake_file="${tmake_file} arm/t-bpabi"
714           ;;
715         arm*-*-symbianelf*)
716           tm_file="${tm_file} arm/symbian.h"
717           # We do not include t-bpabi for Symbian OS because the system
718           # provides its own implementation of the BPABI functions.
719           tmake_file="${tmake_file} t-slibgcc-elf-ver arm/t-symbian"
720           ;;
721         esac
722         tm_file="${tm_file} arm/aout.h arm/arm.h"
723         ;;
724 arm*-*-rtems*)
725         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h"
726         tmake_file="arm/t-arm arm/t-arm-elf t-rtems arm/t-rtems"
727         ;;
728 arm*-*-elf | ep9312-*-elf)
729         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
730         tmake_file="arm/t-arm arm/t-arm-elf"
731         ;;
732 arm*-wince-pe*)
733         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h"
734         tmake_file="arm/t-arm arm/t-wince-pe"
735         extra_options="${extra_options} arm/pe.opt"
736         extra_objs="pe.o"
737         ;;
738 arm-*-pe*)
739         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h"
740         tmake_file="arm/t-arm arm/t-pe"
741         extra_options="${extra_options} arm/pe.opt"
742         extra_objs="pe.o"
743         ;;
744 arm*-*-kaos*)
745         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-arm.h"
746         tmake_file="arm/t-arm arm/t-arm-elf"
747         ;;
748 avr-*-rtems*)
749         tm_file="avr/avr.h dbxelf.h avr/rtems.h rtems.h"
750         tmake_file="avr/t-avr t-rtems avr/t-rtems"
751         ;;
752 avr-*-*)
753         tm_file="avr/avr.h dbxelf.h"
754         use_fixproto=yes
755         ;;
756 bfin*-elf*)
757         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
758         tmake_file=bfin/t-bfin-elf
759         use_collect2=no
760         ;;
761 bfin*-uclinux*)
762         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/uclinux.h"
763         tmake_file=bfin/t-bfin-elf
764         use_collect2=no
765         ;;
766 bfin*-*)
767         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
768         tmake_file=bfin/t-bfin
769         use_collect2=no
770         ;;
771 c4x-*-rtems* | tic4x-*-rtems*)
772         tmake_file="c4x/t-c4x t-rtems c4x/t-rtems"
773         tm_file="c4x/c4x.h c4x/rtems.h rtems.h"
774         c_target_objs="c4x-c.o"
775         cxx_target_objs="c4x-c.o"
776         ;;
777 c4x-* | tic4x-*)
778         tmake_file=c4x/t-c4x
779         c_target_objs="c4x-c.o"
780         cxx_target_objs="c4x-c.o"
781         ;;
782 cris-*-aout)
783         tm_file="dbxelf.h ${tm_file} cris/aout.h"
784         gas=yes
785         tmake_file="cris/t-cris cris/t-aout"
786         extra_options="${extra_options} cris/aout.opt"
787         ;;
788 cris-*-elf | cris-*-none)
789         tm_file="dbxelf.h elfos.h ${tm_file}"
790         tmake_file="cris/t-cris cris/t-elfmulti"
791         gas=yes
792         extra_options="${extra_options} cris/elf.opt"
793         ;;
794 cris-*-linux*)
795         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h"
796         # We need to avoid using t-linux, so override default tmake_file
797         tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
798         extra_options="${extra_options} cris/linux.opt"
799         ;;
800 crx-*-elf)
801         tm_file="elfos.h ${tm_file}"
802         extra_parts="crtbegin.o crtend.o"
803         use_collect2=no
804         ;;
805 fr30-*-elf)
806         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
807         tmake_file=fr30/t-fr30
808         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
809         use_fixproto=yes
810         ;;
811 frv-*-elf)
812         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} frv/frv-abi.h"
813         tmake_file=frv/t-frv
814         use_fixproto=yes
815         ;;
816 frv-*-*linux*)
817         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} \
818                  linux.h frv/linux.h frv/frv-abi.h"
819         tmake_file="${tmake_file} frv/t-frv frv/t-linux"
820         ;;
821 h8300-*-rtemscoff*)
822         tmake_file="h8300/t-h8300 t-rtems h8300/t-rtems"
823         tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h h8300/rtems.h rtems.h"
824         ;;
825 h8300-*-rtems*)
826         tmake_file="h8300/t-h8300 h8300/t-elf t-rtems h8300/t-rtems"
827         tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h"
828         ;;
829 h8300-*-elf*)
830         tmake_file="h8300/t-h8300 h8300/t-elf"
831         tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h"
832         use_fixproto=yes
833         ;;
834 h8300-*-*)
835         tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h"
836         use_fixproto=yes
837         ;;
838 hppa*64*-*-linux* | parisc*64*-*-linux*)
839         target_cpu_default="MASK_PA_11|MASK_PA_20"
840         tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \
841                  pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h pa/pa64-linux.h"
842         tmake_file="${tmake_file} pa/t-linux64"
843         gas=yes gnu_ld=yes
844         need_64bit_hwint=yes
845         ;;
846 hppa*-*-linux* | parisc*-*-linux*)
847         target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
848         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \
849                  pa/pa32-regs.h pa/pa32-linux.h"
850         tmake_file="${tmake_file} pa/t-linux"
851         # if not configured with --enable-sjlj-exceptions, bump the
852         # libgcc version number
853         if test x$sjlj != x1; then
854             tmake_file="$tmake_file pa/t-slibgcc-elf-ver"
855         fi
856         ;;
857 # port not yet contributed.
858 #hppa*-*-openbsd*)
859 #       target_cpu_default="MASK_PA_11"
860 #       ;;
861 hppa1.1-*-pro*)
862         target_cpu_default="MASK_PORTABLE_RUNTIME|MASK_NO_SPACE_REGS|MASK_SOFT_FLOAT"
863         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h \
864                  pa/pa-pro-end.h libgloss.h"
865         tmake_file="pa/t-pro"
866         ;;
867 hppa1.1-*-osf*)
868         target_cpu_default="MASK_PA_11"
869         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-osf.h"
870         tmake_file="pa/t-pa"
871         use_collect2=yes
872         ;;
873 hppa1.1-*-bsd*)
874         target_cpu_default="MASK_PA_11"
875         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h"
876         tmake_file="pa/t-pa"
877         use_collect2=yes
878         ;;
879 hppa[12]*-*-hpux10*)
880         case ${target} in
881         hppa1.1-*-* | hppa2*-*-*)
882                 target_cpu_default="MASK_PA_11"
883                 ;;
884         esac
885         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
886                  pa/pa-hpux.h pa/pa-hpux10.h"
887         extra_options="${extra_options} pa/pa-hpux.opt"
888         case ${target} in
889         *-*-hpux10.[1-9]*)
890                 tm_file="${tm_file} pa/pa-hpux1010.h"
891                 extra_options="${extra_options} pa/pa-hpux1010.opt"
892                 ;;
893         esac
894         tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
895         case ${enable_threads} in
896           "")
897             if test x$have_pthread_h = xyes ; then
898               tmake_file="${tmake_file} pa/t-dce-thr"
899             fi
900             ;;
901           yes | dce)
902             tmake_file="${tmake_file} pa/t-dce-thr"
903             ;;
904         esac
905         use_collect2=yes
906         use_fixproto=yes
907         ;;
908 hppa*64*-*-hpux11*)
909         target_cpu_default="MASK_PA_11|MASK_PA_20"
910         if test x$gnu_ld = xyes
911         then
912                 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
913         fi
914         if test x$gas = xyes
915         then
916                 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
917                          pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
918                          pa/pa-hpux11.h"
919         else
920                 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h pa/elf.h \
921                          pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
922                          pa/pa-hpux11.h"
923         fi
924         case ${target} in
925         *-*-hpux11.[1-9]*)
926                 tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
927                 extra_options="${extra_options} pa/pa-hpux1111.opt"
928                 ;;
929         *)
930                 tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
931                 ;;
932         esac
933         extra_options="${extra_options} pa/pa-hpux.opt \
934                        pa/pa-hpux1010.opt pa/pa64-hpux.opt"
935         need_64bit_hwint=yes
936         tmake_file="pa/t-pa64 pa/t-pa-hpux pa/t-hpux-shlib"
937         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
938         case x${enable_threads} in
939         xyes | xposix )
940                 thread_file=posix 
941                 ;;
942         esac
943         ;;
944 hppa[12]*-*-hpux11*)
945         case ${target} in
946         hppa1.1-*-* | hppa2*-*-*)
947                 target_cpu_default="MASK_PA_11"
948                 ;;
949         esac
950         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
951                  pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h"
952         extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt"
953         case ${target} in
954         *-*-hpux11.[1-9]*)
955                 tm_file="${tm_file} pa/pa-hpux1111.h"
956                 extra_options="${extra_options} pa/pa-hpux1111.opt"
957                 ;;
958         esac
959         tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
960         case x${enable_threads} in
961         xyes | xposix )
962                 thread_file=posix 
963                 ;;
964         esac
965         use_collect2=yes
966         ;;
967 i[34567]86-*-darwin*)
968         # All the configuration is presently done generically.
969         ;;
970 i[34567]86-*-elf*)
971         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h"
972         tmake_file="i386/t-i386elf t-svr4"
973         use_fixproto=yes
974         ;;
975 i[34567]86-sequent-ptx4* | i[34567]86-sequent-sysv4*)
976         if test x$gas = xyes
977         then
978                 tm_file="${tm_file} usegas.h"
979         fi
980         xm_defines="SMALL_ARG_MAX"
981         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ptx4.h i386/ptx4-i.h"
982         tmake_file=t-svr4
983         extra_parts="crtbegin.o crtend.o"
984         use_fixproto=yes
985         ;;
986 i[34567]86-*-aout*)
987         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/i386-aout.h"
988         use_fixproto=yes
989         ;;
990 i[34567]86-*-beoself* | i[34567]86-*-beos*)
991         tmake_file='i386/t-beos i386/t-crtpic'
992         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/beos-elf.h"
993         extra_parts='crtbegin.o crtend.o'
994         ;;
995 i[34567]86-*-freebsd*)
996         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
997         ;;
998 x86_64-*-freebsd*)
999         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
1000         ;;
1001 i[34567]86-*-netbsdelf*)
1002         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
1003         ;;
1004 i[34567]86-*-netbsd*)
1005         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h"
1006         tmake_file=t-netbsd
1007         extra_parts=""
1008         use_collect2=yes
1009         ;;
1010 x86_64-*-netbsd*)
1011         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
1012         ;;
1013 i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123])
1014         tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h"
1015         # needed to unconfuse gdb
1016         tmake_file="t-libc-ok t-openbsd i386/t-openbsd"
1017         # we need collect2 until our bug is fixed...
1018         use_collect2=yes
1019         ;;
1020 i[34567]86-*-openbsd*)
1021         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
1022         tm_file="${tm_file} openbsd.h i386/openbsdelf.h"
1023         gas=yes
1024         gnu_ld=yes
1025         ;;
1026 i[34567]86-*-coff*)
1027         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/i386-coff.h"
1028         use_fixproto=yes
1029         ;;
1030 i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu)
1031                         # Intel 80386's running GNU/*
1032                         # with ELF format using glibc 2
1033         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h"
1034         case ${target} in
1035         i[34567]86-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h i386/knetbsd-gnu.h" ;;
1036         i[34567]86-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h i386/kfreebsd-gnu.h" ;;
1037         esac
1038         tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtfm"
1039         ;;
1040 x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
1041         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h \
1042                  i386/x86-64.h i386/linux64.h"
1043         case ${target} in
1044         x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h" ;;
1045         x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;;
1046         esac
1047         tmake_file="${tmake_file} i386/t-linux64 i386/t-crtfm"
1048         ;;
1049 i[34567]86-*-gnu*)
1050         ;;
1051 i[34567]86-pc-msdosdjgpp*)
1052         xm_file=i386/xm-djgpp.h
1053         tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h"
1054         tmake_file=i386/t-djgpp
1055         extra_options="${extra_options} i386/djgpp.opt"
1056         gnu_ld=yes
1057         gas=yes
1058         ;;
1059 i[34567]86-*-lynxos*)
1060         xm_defines=POSIX
1061         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
1062         tmake_file="i386/t-crtstuff t-lynx"
1063         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1064         extra_options="${extra_options} lynx.opt"
1065         thread_file=lynx
1066         gnu_ld=yes
1067         gas=yes
1068         ;;
1069 i[3456x]86-*-netware*)
1070         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h tm-dwarf2.h i386/netware.h"
1071         tmake_file=i386/t-netware
1072         extra_objs=netware.o
1073         case /${with_ld} in
1074         */nwld)
1075                 extra_objs="$extra_objs nwld.o"
1076                 tm_file="${tm_file} i386/nwld.h"
1077                 tmake_file="${tmake_file} i386/t-nwld"
1078                 extra_parts="crt0.o libgcc.def libc.def libcpre.def posixpre.def"
1079                 ;;
1080         esac
1081         case x${enable_threads} in
1082         x | xyes | xposix) thread_file='posix';;
1083         xnks) thread_file='nks';;
1084         xno) ;;
1085         *) echo 'Unknown thread configuration for NetWare' >&2; exit 1;;
1086         esac
1087         ;;
1088 i[34567]86-*-nto-qnx*)
1089         tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h svr4.h i386/unix.h i386/nto.h"
1090         tmake_file=i386/t-nto
1091         gnu_ld=yes
1092         gas=yes
1093         ;;
1094 i[34567]86-*-rtems*)
1095         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h"
1096         extra_parts="crtbegin.o crtend.o crti.o crtn.o"
1097         tmake_file="i386/t-rtems-i386 i386/t-crtstuff t-rtems"
1098         ;;
1099 i[34567]86-*-sco3.2v5*) # 80386 running SCO Open Server 5
1100         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/sco5.h"
1101         if test x$gas = xyes
1102         then
1103                 tm_file="usegas.h ${tm_file}"
1104         fi
1105         tmake_file=i386/t-sco5
1106         extra_parts="crtbegin.o crtend.o"
1107         extra_options="${extra_options} i386/sco5.opt"
1108         use_fixproto=yes
1109         ;;
1110 i[34567]86-*-solaris2*)
1111         xm_defines="SMALL_ARG_MAX"
1112         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h"
1113         case ${target} in
1114         *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
1115                 tm_file="${tm_file} sol26.h"
1116         esac
1117         tm_file="${tm_file} i386/sol2.h"
1118         tmake_file="t-sol2 i386/t-sol2 t-svr4"
1119         c_target_objs="sol2-c.o"
1120         cxx_target_objs="sol2-c.o"
1121         extra_objs="sol2.o"
1122         tm_p_file="${tm_p_file} sol2-protos.h"
1123         if test x$gnu_ld = xyes; then
1124                 tmake_file="$tmake_file t-slibgcc-elf-ver"
1125                 tm_defines="${tm_defines} TARGET_GNU_LD=1"
1126         else
1127                 tmake_file="$tmake_file t-slibgcc-sld"
1128         fi
1129         case ${target} in
1130         *-*-solaris2.[789] | *-*-solaris2.1[0-9]*)
1131                 tm_file="$tm_file tm-dwarf2.h"
1132                 ;;
1133         esac
1134         case ${target} in
1135         *-*-solaris2.1[0-9]*)
1136                 tm_file="${tm_file} i386/x86-64.h i386/sol2-10.h"
1137                 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1138                 tmake_file="$tmake_file i386/t-sol2-10"
1139                 need_64bit_hwint=yes
1140                 # Solaris 2.10 provides crt1.o, crti.o, crtn.o, and gcrt1.o as 
1141                 # part of the base system.
1142                 extra_parts="gmon.o crtbegin.o crtend.o"
1143                 ;;
1144         *)
1145                 extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
1146                 ;;
1147         esac
1148         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
1149           "":yes:* | yes:yes:* )
1150                 case ${target} in
1151                   *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
1152                         thread_file=posix95
1153                         ;;
1154                   *)
1155                         thread_file=posix
1156                         ;;
1157                 esac
1158                 ;;
1159           "":*:yes | yes:*:yes )
1160                 thread_file=solaris
1161                 ;;
1162         esac
1163         ;;
1164 i[34567]86-*-sysv5*)           # Intel x86 on System V Release 5
1165        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv5.h"
1166        if test x$stabs = xyes
1167        then
1168                tm_file="${tm_file} dbx.h"
1169        fi
1170        tmake_file="i386/t-crtpic t-svr4"
1171        extra_parts="crtbegin.o crtend.o"
1172        if test x$enable_threads = xyes; then
1173                thread_file='posix'
1174        fi
1175         use_fixproto=yes
1176        ;;
1177 i[34567]86-*-sysv4*)            # Intel 80386's running system V.4
1178         xm_defines="SMALL_ARG_MAX"
1179         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv4-cpp.h"
1180         if test x$stabs = xyes
1181         then
1182                 tm_file="${tm_file} dbx.h"
1183         fi
1184         tmake_file="i386/t-crtpic t-svr4"
1185         extra_parts="crtbegin.o crtend.o"
1186         use_fixproto=yes
1187         ;;
1188 i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae)
1189         tm_file="${tm_file} i386/sysv4.h i386/unix.h i386/att.h vx-common.h"
1190         case ${target} in
1191           *-vxworksae*)
1192             tm_file="${tm_file} vxworksae.h i386/vxworksae.h"
1193             tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae"
1194             ;;
1195           *)
1196             tm_file="${tm_file} vxworks.h i386/vxworks.h"
1197             tmake_file="${tmake_file} i386/t-vxworks"
1198             ;;
1199         esac
1200         ;;
1201 i[34567]86-*-pe | i[34567]86-*-cygwin*)
1202         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h"
1203         xm_file=i386/xm-cygwin.h
1204         tmake_file="i386/t-cygwin i386/t-cygming"
1205         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1206         extra_options="${extra_options} i386/cygming.opt"
1207         extra_objs=winnt.o
1208         c_target_objs=cygwin2.o
1209         cxx_target_objs=cygwin2.o
1210         extra_gcc_objs=cygwin1.o
1211         if test x$enable_threads = xyes; then
1212                 thread_file='posix'
1213         fi
1214         ;;
1215 i[34567]86-*-mingw32*)
1216         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h"
1217         xm_file=i386/xm-mingw32.h
1218         tmake_file="i386/t-cygming i386/t-mingw32"
1219         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1220         extra_options="${extra_options} i386/cygming.opt"
1221         extra_objs=winnt.o
1222         case ${enable_threads} in
1223           "" | yes | win32) thread_file='win32' ;;
1224         esac
1225         case ${target} in
1226                 *mingw32crt*)
1227                         tm_file="${tm_file} i386/crtdll.h"
1228                         ;;
1229                 *mingw32msv* | *mingw32*)
1230                         ;;
1231         esac
1232         ;;
1233 i[34567]86-*-uwin*)
1234         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygwin.h i386/uwin.h"
1235         tmake_file="i386/t-cygwin i386/t-uwin"
1236         extra_objs=winnt.o
1237         extra_options="${extra_options} i386/cygming.opt"
1238         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1239         if test x$enable_threads = xyes; then
1240                 thread_file='win32'
1241         fi
1242         use_fixproto=yes
1243         ;;
1244 i[34567]86-*-interix3*)
1245         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
1246         tmake_file="i386/t-interix"
1247         extra_objs=winnt.o
1248         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1249         if test x$enable_threads = xyes ; then
1250                 thread_file='posix'
1251         fi
1252         if test x$stabs = xyes ; then
1253                 tm_file="${tm_file} dbxcoff.h"
1254         fi
1255         ;;
1256 i[34567]86-*-kaos*)
1257         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h kaos.h i386/kaos-i386.h"
1258         tmake_file="i386/t-i386elf t-svr4"
1259         ;;
1260 ia64*-*-elf*)
1261         tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/elf.h"
1262         tmake_file="ia64/t-ia64"
1263         target_cpu_default="0"
1264         if test x$gas = xyes
1265         then
1266                 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1267         fi
1268         if test x$gnu_ld = xyes
1269         then
1270                 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1271         fi
1272         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1273         use_fixproto=yes
1274         ;;
1275 ia64*-*-freebsd*)
1276         tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
1277         target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1278         tmake_file="${tmake_file} ia64/t-ia64"
1279         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1280         ;;
1281 ia64*-*-linux*)
1282         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h ia64/sysv4.h ia64/linux.h"
1283         tmake_file="${tmake_file} ia64/t-ia64 t-libunwind ia64/t-glibc"
1284         if test x$with_system_libunwind != xyes ; then
1285                 tmake_file="${tmake_file} t-libunwind-elf ia64/t-glibc-libunwind"
1286         fi
1287         target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1288         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1289         ;;
1290 ia64*-*-hpux*)
1291         tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h"
1292         tmake_file="ia64/t-ia64 ia64/t-hpux"
1293         target_cpu_default="MASK_GNU_AS"
1294         case x$enable_threads in
1295         xyes | xposix )
1296                 thread_file=posix
1297                 ;;
1298         esac
1299         use_collect2=no
1300         c_target_objs="ia64-c.o"
1301         cxx_target_objs="ia64-c.o"
1302         extra_options="${extra_options} ia64/ilp32.opt"
1303         # If we decide to run fixproto we should define FIXPROTO_DEFINES
1304         # in ia64/t-hpux, and also fix the definition of putenv in
1305         # sys-protos.h (const char not char).
1306         ;;
1307 iq2000*-*-elf*)
1308         tm_file="svr4.h elfos.h iq2000/iq2000.h"
1309         tmake_file=iq2000/t-iq2000
1310         out_file=iq2000/iq2000.c
1311         md_file=iq2000/iq2000.md
1312         use_fixproto=yes
1313         ;;
1314 m32r-*-elf*)
1315         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1316         extra_parts="crtinit.o crtfini.o"
1317         use_fixproto=yes
1318         ;;
1319 m32rle-*-elf*)
1320         tm_file="dbxelf.h elfos.h svr4.h m32r/little.h ${tm_file}"
1321         extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o"
1322         use_fixproto=yes
1323         ;;
1324 m32r-*-linux*)
1325         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} m32r/linux.h"
1326         # We override the tmake_file for linux -- why?
1327         tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1328         gnu_ld=yes
1329         use_fixproto=yes
1330         if test x$enable_threads = xyes; then
1331                 thread_file='posix'
1332         fi
1333         ;;
1334 m32rle-*-linux*)
1335         tm_file="dbxelf.h elfos.h svr4.h linux.h m32r/little.h ${tm_file} m32r/linux.h"
1336         # We override the tmake_file for linux -- why?
1337         tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1338         gnu_ld=yes
1339         use_fixproto=yes
1340         if test x$enable_threads = xyes; then
1341                 thread_file='posix'
1342         fi
1343         ;;
1344 # m68hc11 and m68hc12 share the same machine description.
1345 m68hc11-*-*|m6811-*-*)
1346         tm_file="dbxelf.h elfos.h m68hc11/m68hc11.h"
1347         tm_p_file="m68hc11/m68hc11-protos.h"
1348         md_file="m68hc11/m68hc11.md"
1349         out_file="m68hc11/m68hc11.c"
1350         tmake_file="m68hc11/t-m68hc11-gas"
1351         use_fixproto=yes
1352         ;;
1353 m68hc12-*-*|m6812-*-*)
1354         tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h m68hc11/m68hc11.h"
1355         tm_p_file="m68hc11/m68hc11-protos.h"
1356         md_file="m68hc11/m68hc11.md"
1357         out_file="m68hc11/m68hc11.c"
1358         tmake_file="m68hc11/t-m68hc11-gas"
1359         extra_options="${extra_options} m68hc11/m68hc11.opt"
1360         use_fixproto=yes
1361         ;;
1362 m68k-*-aout*)
1363         tmake_file=m68k/t-m68kbare
1364         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kemb.h m68k/m68k-aout.h libgloss.h"
1365         ;;
1366 m68k-*-coff*)
1367         tmake_file=m68k/t-m68kbare
1368         tm_defines="MOTOROLA USE_GAS"
1369         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kemb.h dbxcoff.h m68k/coff.h dbx.h"
1370         use_fixproto=yes
1371         ;;
1372 m68020-*-elf* | m68k-*-elf*)
1373         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h"
1374         tm_defines="MOTOROLA USE_GAS"
1375         tmake_file=m68k/t-m68kelf
1376         extra_parts="crtbegin.o crtend.o"
1377         use_fixproto=yes
1378         ;;
1379 m68010-*-netbsdelf* | m68k*-*-netbsdelf*)
1380         tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
1381         tm_defines="MOTOROLA USE_GAS"
1382         case ${target} in
1383         m68010*)
1384                 target_cpu_default="0"
1385                 ;;
1386         *)
1387                 target_cpu_default="MASK_68020|MASK_68881|MASK_BITFIELD"
1388                 ;;
1389         esac
1390         ;;
1391 m68k*-*-openbsd*)
1392         # needed to unconfuse gdb
1393         tm_defines="OBSD_OLD_GAS TARGET_DEFAULT=(MASK_68020|MASK_68881|MASK_BITFIELD)"
1394         tm_file="m68k/m68k.h openbsd.h m68k/openbsd.h"
1395         tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
1396         # we need collect2 until our bug is fixed...
1397         use_collect2=yes
1398         ;;
1399 m68k-*-uclinux*)                # Motorola m68k/ColdFire running uClinux with uClibc
1400         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux.h"
1401         tm_defines="MOTOROLA USE_GAS"
1402         tmake_file=m68k/t-uclinux
1403         use_fixproto=no
1404         ;;
1405 m68k-*-linux*)          # Motorola m68k's running GNU/Linux
1406                                 # with ELF format using glibc 2
1407                                 # aka the GNU/Linux C library 6.
1408         tm_file="m68k/m68k.h dbxelf.h elfos.h svr4.h linux.h m68k/linux.h"
1409         extra_options="${extra_options} m68k/ieee.opt"
1410         tm_defines="MOTOROLA USE_GAS"
1411         # if not configured with --enable-sjlj-exceptions, bump the
1412         # libgcc version number
1413         if test x$sjlj != x1; then
1414             tmake_file="$tmake_file m68k/t-slibgcc-elf-ver"
1415         fi
1416         ;;
1417 m68k-*-rtems*)
1418         tmake_file="m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems"
1419         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h"
1420         tm_defines="MOTOROLA USE_GAS"
1421         extra_parts="crtbegin.o crtend.o"
1422         ;;
1423 mcore-*-elf)
1424         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} mcore/mcore-elf.h"
1425         tmake_file=mcore/t-mcore
1426         use_fixproto=yes
1427         ;;
1428 mcore-*-pe*)
1429         tm_file="svr3.h dbxcoff.h ${tm_file} mcore/mcore-pe.h"
1430         tmake_file=mcore/t-mcore-pe
1431         use_fixproto=yes
1432         ;;
1433 mips-sgi-irix[56]*)
1434         tm_file="elfos.h ${tm_file} mips/iris.h"
1435         tmake_file="mips/t-iris mips/t-slibgcc-irix"
1436         target_cpu_default="MASK_ABICALLS"
1437         case ${target} in
1438         *-*-irix5*)
1439                 tm_file="${tm_file} mips/iris5.h"
1440                 ;;
1441
1442         *-*-irix6*)
1443                 tm_file="${tm_file} mips/iris6.h"
1444                 tmake_file="${tmake_file} mips/t-iris6"
1445                 tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
1446                 ;;
1447         esac
1448         if test "x$stabs" = xyes
1449         then
1450                 tm_file="${tm_file} dbx.h mips/dbxmdebug.h"
1451         fi
1452         if test "x$gnu_ld" = xyes
1453         then
1454                 tm_defines="${tm_defines} IRIX_USING_GNU_LD"
1455         fi
1456 #       if test x$enable_threads = xyes; then
1457 #               thread_file='irix'
1458 #       fi
1459         use_fixproto=yes
1460         ;;
1461 mips*-*-netbsd*)                        # NetBSD/mips, either endian.
1462         target_cpu_default="MASK_ABICALLS"
1463         tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
1464         ;;
1465 mips64*-*-linux*)
1466         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h mips/linux64.h"
1467         tmake_file="${tmake_file} mips/t-linux64"
1468         tm_defines="MIPS_ABI_DEFAULT=ABI_N32"
1469         gnu_ld=yes
1470         gas=yes
1471         ;;
1472 mips*-*-linux*)                         # Linux MIPS, either endian.
1473         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h"
1474         case ${target} in
1475         mipsisa32*-*)
1476                 target_cpu_default="MASK_SOFT_FLOAT"
1477                 tm_defines="MIPS_ISA_DEFAULT=32"
1478                 ;;
1479         esac
1480         ;;
1481 mips*-*-openbsd*)
1482         tm_defines="OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
1483         target_cpu_default="MASK_ABICALLS"
1484         tm_file="mips/mips.h openbsd.h mips/openbsd.h mips/sdb.h"
1485         case ${target} in
1486         mips*el-*-openbsd*) 
1487             tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";;
1488         *)  tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";;
1489         esac
1490         ;;
1491 mipsisa32-*-elf* | mipsisa32el-*-elf*)
1492         tm_file="elfos.h ${tm_file} mips/elf.h"
1493         tmake_file=mips/t-isa3264
1494         tm_defines="MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_EABI"
1495         use_fixproto=yes
1496         ;;
1497 mipsisa32r2-*-elf* | mipsisa32r2el-*-elf*)
1498         tm_file="elfos.h ${tm_file} mips/elf.h"
1499         tmake_file=mips/t-isa3264
1500         tm_defines="MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_EABI"
1501         use_fixproto=yes
1502         ;;
1503 mipsisa64-*-elf* | mipsisa64el-*-elf*)
1504         tm_file="elfos.h ${tm_file} mips/elf.h"
1505         tmake_file=mips/t-isa3264
1506         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1507         tm_defines="MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_EABI"
1508         use_fixproto=yes
1509         ;;
1510 mipsisa64sr71k-*-elf*)
1511         tm_file="elfos.h ${tm_file} mips/elf.h"
1512         tmake_file=mips/t-sr71k
1513         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1514         tm_defines="MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
1515         use_fixproto=yes
1516         ;;
1517 mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
1518         tm_file="elfos.h ${tm_file} mips/elf.h"
1519         tmake_file=mips/t-elf
1520         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1521         tm_defines="MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
1522         use_fixproto=yes
1523         ;;
1524 mips-*-elf* | mipsel-*-elf*)
1525         tm_file="elfos.h ${tm_file} mips/elf.h"
1526         tmake_file=mips/t-elf
1527         use_fixproto=yes
1528         ;;
1529 mips64-*-elf* | mips64el-*-elf*)
1530         tm_file="elfos.h ${tm_file} mips/elf.h"
1531         tmake_file=mips/t-elf
1532         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1533         tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1534         use_fixproto=yes
1535         ;;
1536 mips64vr-*-elf* | mips64vrel-*-elf*)
1537         tm_file="mips/vr.h elfos.h ${tm_file} mips/elf.h"
1538         tmake_file=mips/t-vr
1539         use_fixproto=yes
1540         ;;
1541 mips64orion-*-elf* | mips64orionel-*-elf*)
1542         tm_file="elfos.h ${tm_file} mips/elforion.h mips/elf.h"
1543         tmake_file=mips/t-elf
1544         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1545         tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1546         use_fixproto=yes
1547         ;;
1548 mips*-*-rtems*)
1549         tm_file="elfos.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
1550         tmake_file="mips/t-elf t-rtems mips/t-rtems"
1551         ;;
1552 mips-wrs-vxworks)
1553         # We want vxworks.h after mips/elf.h, which unfortunately means we
1554         # have to redo the tm_file list from scratch.
1555         tm_file="elfos.h mips/mips.h svr4.h mips/elf.h vxworks.h mips/vxworks.h"
1556         tmake_file="${tmake_file} mips/t-vxworks"
1557         ;;
1558 mips-wrs-windiss)       # Instruction-level simulator for VxWorks.
1559         xm_defines=POSIX
1560         tm_file="elfos.h mips/mips.h svr4.h mips/elf.h windiss.h mips/windiss.h"
1561         tmake_file="${tmake_file} mips/t-elf"
1562         thread_file=
1563         ;;
1564 mipstx39-*-elf* | mipstx39el-*-elf*)
1565         tm_file="elfos.h ${tm_file} mips/r3900.h mips/elf.h"
1566         tmake_file=mips/t-r3900
1567         use_fixproto=yes
1568         ;;
1569 mmix-knuth-mmixware)
1570         need_64bit_hwint=yes
1571         ;;
1572 mn10300-*-*)
1573         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1574         if test x$stabs = xyes
1575         then
1576                 tm_file="${tm_file} dbx.h"
1577         fi
1578         use_collect2=no
1579         use_fixproto=yes
1580         ;;
1581 ms1-*-elf)
1582         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1583         tmake_file="${tmake_file} ms1/t-ms1"
1584         ;;
1585 ns32k-*-netbsdelf*)
1586         echo "GCC does not yet support the ${target} target"; exit 1
1587         ;;
1588 ns32k-*-netbsd*)
1589         tm_file="${tm_file} netbsd.h netbsd-aout.h ns32k/netbsd.h"
1590         # On NetBSD, the headers are already okay, except for math.h.
1591         tmake_file="t-netbsd ns32k/t-ns32k"
1592         extra_parts=""
1593         use_collect2=yes
1594         ;;
1595 pdp11-*-bsd)
1596         tm_file="${tm_file} pdp11/2bsd.h"
1597         use_fixproto=yes
1598         ;;
1599 pdp11-*-*)
1600         use_fixproto=yes
1601         ;;
1602 # port not yet contributed
1603 #powerpc-*-openbsd*)
1604 #       tmake_file="${tmake_file} rs6000/t-fprules "
1605 #       extra_headers=
1606 #       ;;
1607 powerpc64-*-linux*)
1608         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1609         test x$with_cpu != x || cpu_is_64bit=yes
1610         test x$cpu_is_64bit != xyes || tm_file="${tm_file} rs6000/default64.h"
1611         tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
1612         if test x${enable_secureplt} = xyes; then
1613                 tm_file="rs6000/secureplt.h ${tm_file}"
1614         fi
1615         extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
1616         tmake_file="rs6000/t-fprules ${tmake_file} rs6000/t-ppccomm rs6000/t-linux64"
1617         ;;
1618 powerpc64-*-gnu*)
1619         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux64.h rs6000/gnu.h"
1620         extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
1621         tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-gnu rs6000/t-linux64"
1622         ;;
1623 powerpc-*-beos*)
1624         tm_file="${tm_file} rs6000/aix.h rs6000/beos.h rs6000/xcoff.h"
1625         tmake_file="rs6000/t-fprules rs6000/t-beos"
1626         extra_headers=
1627         use_fixproto=yes
1628         ;;
1629 powerpc-*-darwin*)
1630         extra_options="${extra_options} rs6000/darwin.opt"
1631         case ${target} in
1632           *-darwin1[0-9]* | *-darwin[8-9]*)
1633             tmake_file="${tmake_file} rs6000/t-darwin8" 
1634             tm_file="${tm_file} rs6000/darwin8.h"
1635             ;;
1636           *-darwin7*)
1637             tm_file="${tm_file} rs6000/darwin7.h"
1638             ;;
1639           *-darwin[0-6]*)
1640             ;;
1641         esac
1642         extra_headers=altivec.h
1643         ;;
1644 powerpc*-*-freebsd*)
1645         tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
1646         tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1647         extra_options="${extra_options} rs6000/sysv4.opt"
1648         ;;
1649 powerpc-*-netbsd*)
1650         tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
1651         tmake_file="${tmake_file} rs6000/t-netbsd"
1652         extra_options="${extra_options} rs6000/sysv4.opt"
1653         ;;
1654 powerpc-*-chorusos*)
1655         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h chorus.h"
1656         tmake_file="rs6000/t-fprules rs6000/t-ppcos rs6000/t-ppccomm"
1657         extra_options="${extra_options} rs6000/sysv4.opt"
1658         case ${enable_threads} in
1659           yes | posix)
1660             thread_file='posix'
1661             ;;
1662         esac
1663         use_fixproto=yes
1664         ;;
1665 powerpc-*-eabispe*)
1666         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabispe.h"
1667         extra_options="${extra_options} rs6000/sysv4.opt"
1668         tmake_file="rs6000/t-spe rs6000/t-ppccomm"
1669         ;;
1670 powerpc-*-eabisimaltivec*)
1671         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h rs6000/eabialtivec.h"
1672         extra_options="${extra_options} rs6000/sysv4.opt"
1673         tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
1674         ;;
1675 powerpc-*-eabisim*)
1676         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h"
1677         extra_options="${extra_options} rs6000/sysv4.opt"
1678         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1679         ;;
1680 powerpc-*-elf*)
1681         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1682         extra_options="${extra_options} rs6000/sysv4.opt"
1683         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1684         use_fixproto=yes
1685         ;;
1686 powerpc-*-eabialtivec*)
1687         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabialtivec.h"
1688         extra_options="${extra_options} rs6000/sysv4.opt"
1689         tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
1690         ;;
1691 powerpc-*-eabi*)
1692         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h"
1693         extra_options="${extra_options} rs6000/sysv4.opt"
1694         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1695         ;;
1696 powerpc-*-rtems*)
1697         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/rtems.h rtems.h"
1698         extra_options="${extra_options} rs6000/sysv4.opt"
1699         tmake_file="rs6000/t-fprules rs6000/t-rtems t-rtems rs6000/t-ppccomm"
1700         ;;
1701 powerpc-*-linux*altivec*)
1702         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h"
1703         extra_options="${extra_options} rs6000/sysv4.opt"
1704         tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1705         ;;
1706 powerpc-*-linux*spe*)
1707         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxspe.h"
1708         extra_options="${extra_options} rs6000/sysv4.opt"
1709         tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1710         ;;
1711 powerpc-*-linux*)
1712         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1713         extra_options="${extra_options} rs6000/sysv4.opt"
1714         tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1715         case ${enable_targets}:${cpu_is_64bit} in
1716             *powerpc64* | all:* | *:yes)
1717                 if test x$cpu_is_64bit = xyes; then
1718                     tm_file="${tm_file} rs6000/default64.h"
1719                 fi
1720                 tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
1721                 tmake_file="$tmake_file rs6000/t-linux64"
1722                 extra_options="${extra_options} rs6000/linux64.opt"
1723                 ;;
1724             *)
1725                 tm_file="${tm_file} rs6000/linux.h"
1726                 ;;
1727         esac
1728         if test x${enable_secureplt} = xyes; then
1729                 tm_file="rs6000/secureplt.h ${tm_file}"
1730         fi
1731         ;;
1732 powerpc-*-gnu-gnualtivec*)
1733         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h"
1734         extra_options="${extra_options} rs6000/sysv4.opt"
1735         tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1736         if test x$enable_threads = xyes; then
1737                 thread_file='posix'
1738         fi
1739         ;;
1740 powerpc-*-gnu*)
1741         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h"
1742         tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1743         extra_options="${extra_options} rs6000/sysv4.opt"
1744         if test x$enable_threads = xyes; then
1745                 thread_file='posix'
1746         fi
1747         ;;
1748 powerpc-wrs-vxworks|powerpc-wrs-vxworksae)
1749         # We want vxworks.h after rs6000/sysv4.h, which unfortunately
1750         # means we have to redo the tm_file list from scratch.
1751         tm_file="rs6000/rs6000.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1752         tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-ppccomm rs6000/t-vxworks"
1753         extra_options="${extra_options} rs6000/sysv4.opt"
1754         extra_headers=ppc-asm.h
1755         case ${target} in
1756           *-vxworksae*)
1757             tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/vxworksae.h"
1758             tmake_file="${tmake_file} rs6000/t-vxworksae"
1759             ;;
1760           *-vxworks*)
1761             tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h"
1762             ;;
1763         esac
1764         ;;
1765 powerpc-wrs-windiss*)  # Instruction-level simulator for VxWorks.
1766         tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/windiss.h"
1767         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1768         extra_options="${extra_options} rs6000/sysv4.opt"
1769         thread_file=""
1770         use_fixproto=yes
1771         ;;
1772 powerpc-*-lynxos*)
1773         xm_defines=POSIX
1774         tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
1775         tmake_file="t-lynx rs6000/t-lynx"
1776         extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
1777         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1778         extra_options="${extra_options} lynx.opt"
1779         thread_file=lynx
1780         gnu_ld=yes
1781         gas=yes
1782         ;;
1783 powerpcle-*-sysv*)
1784         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
1785         tmake_file="rs6000/t-fprules rs6000/t-ppcos rs6000/t-ppccomm"
1786         extra_options="${extra_options} rs6000/sysv4.opt"
1787         use_fixproto=yes
1788         ;;
1789 powerpcle-*-elf*)
1790         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
1791         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1792         extra_options="${extra_options} rs6000/sysv4.opt"
1793         use_fixproto=yes
1794         ;;
1795 powerpcle-*-eabisim*)
1796         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/eabisim.h"
1797         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1798         extra_options="${extra_options} rs6000/sysv4.opt"
1799         ;;
1800 powerpcle-*-eabi*)
1801         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h"
1802         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1803         extra_options="${extra_options} rs6000/sysv4.opt"
1804         ;;
1805 powerpc-*-kaos*)
1806         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h kaos.h rs6000/kaos-ppc.h"
1807         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1808         extra_options="${extra_options} rs6000/sysv4.opt"
1809         ;;
1810 powerpcle-*-kaos*)
1811         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h kaos.h rs6000/kaos-ppc.h"
1812         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1813         extra_options="${extra_options} rs6000/sysv4.opt"
1814         ;;
1815 rs6000-ibm-aix4.[12]* | powerpc-ibm-aix4.[12]*)
1816         tm_file="${tm_file} rs6000/aix.h rs6000/aix41.h rs6000/xcoff.h"
1817         tmake_file="rs6000/t-fprules rs6000/t-newas"
1818         extra_options="${extra_options} rs6000/aix41.opt"
1819         use_collect2=yes
1820         extra_headers=
1821         use_fixproto=yes
1822         ;;
1823 rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
1824         tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h"
1825         tmake_file=rs6000/t-aix43
1826         extra_options="${extra_options} rs6000/aix64.opt"
1827         use_collect2=yes
1828         thread_file='aix'
1829         extra_headers=
1830         ;;
1831 rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
1832         tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h"
1833         extra_options="${extra_options} rs6000/aix64.opt"
1834         tmake_file=rs6000/t-aix43
1835         use_collect2=yes
1836         thread_file='aix'
1837         extra_headers=
1838         ;;
1839 rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*)
1840         tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h"
1841         tmake_file=rs6000/t-aix52
1842         extra_options="${extra_options} rs6000/aix64.opt"
1843         use_collect2=yes
1844         thread_file='aix'
1845         extra_headers=
1846         ;;
1847 s390-*-linux*)
1848         tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
1849         tmake_file="${tmake_file} s390/t-crtstuff"
1850         ;;
1851 s390x-*-linux*)
1852         tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
1853         tm_p_file=s390/s390-protos.h
1854         md_file=s390/s390.md
1855         extra_modes=s390/s390-modes.def
1856         out_file=s390/s390.c
1857         tmake_file="${tmake_file} s390/t-crtstuff s390/t-linux64"
1858         ;;
1859 s390x-ibm-tpf*)
1860         tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h s390/tpf.h"
1861         tm_p_file=s390/s390-protos.h
1862         md_file=s390/s390.md
1863         extra_modes=s390/s390-modes.def
1864         out_file=s390/s390.c
1865         extra_parts="crtbeginS.o crtendS.o"
1866         tmake_file="s390/t-crtstuff s390/t-tpf"
1867         thread_file='tpf'
1868         extra_options="${extra_options} s390/tpf.opt"
1869         ;;
1870 sh-*-elf* | sh[12346l]*-*-elf* | sh*-*-kaos* | \
1871 sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \
1872   sh-*-linux* | sh[346lbe]*-*-linux* | \
1873   sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
1874    sh64-*-netbsd* | sh64l*-*-netbsd*)
1875         tmake_file="${tmake_file} sh/t-sh sh/t-elf"
1876         if test x${with_endian} = x; then
1877                 case ${target} in
1878                 sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;;
1879                 shbe-*-* | sheb-*-*)               with_endian=big,little ;;
1880                 sh[1234]l* | sh[34]*-*-linux*)     with_endian=little ;;
1881                 shl* | sh64l* | sh*-*-linux* | \
1882                   sh5l* | sh-superh-elf)           with_endian=little,big ;;
1883                 sh[1234]*-*-*)                     with_endian=big ;;
1884                 *)                                 with_endian=big,little ;;
1885                 esac
1886         fi
1887         case ${with_endian} in
1888         big|little)     tmake_file="${tmake_file} sh/t-1e" ;;
1889         big,little|little,big) ;;
1890         *)      echo "with_endian=${with_endian} not supported."; exit 1 ;;
1891         esac
1892         case ${with_endian} in
1893         little*)        tm_file="sh/little.h ${tm_file}" ;;
1894         esac
1895         tm_file="${tm_file} dbxelf.h elfos.h"
1896         case ${target} in
1897         sh*-*-netbsd*)  ;;
1898         *)              tm_file="${tm_file} svr4.h" ;;
1899         esac
1900         tm_file="${tm_file} sh/elf.h"
1901         case ${target} in
1902         sh*-*-linux*)   tmake_file="${tmake_file} sh/t-linux"
1903                         tm_file="${tm_file} linux.h sh/linux.h" ;;
1904         sh*-*-kaos*)    tm_file="${tm_file} sh/embed-elf.h kaos.h sh/kaos-sh.h"
1905                         ;;
1906         sh*-*-netbsd*)  tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h" ;;
1907         *)              tm_file="${tm_file} sh/embed-elf.h" ;;
1908         esac
1909         case ${target} in
1910         sh5*-*-netbsd*)
1911                 # SHmedia, 32-bit ABI
1912                 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd"
1913                 ;;
1914         sh64*-netbsd*)
1915                 # SHmedia, 64-bit ABI
1916                 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd sh/t-netbsd-sh5-64"
1917                 ;;
1918         *-*-netbsd)
1919                 tmake_file="${tmake_file} sh/t-netbsd"
1920                 ;;
1921         sh64*-*-linux*)
1922                 tmake_file="${tmake_file} sh/t-sh64 sh/t-linux64"
1923                 tm_file="${tm_file} sh/sh64.h"
1924                 extra_headers="shmedia.h ushmedia.h sshmedia.h"
1925                 ;;
1926         sh64*)
1927                 tmake_file="${tmake_file} sh/t-sh64"
1928                 tm_file="${tm_file} sh/sh64.h"
1929                 extra_headers="shmedia.h ushmedia.h sshmedia.h"
1930                 ;;
1931         *-*-symbianelf*)
1932                 tmake_file="sh/t-symbian"
1933                 tm_file="sh/symbian-pre.h sh/little.h ${tm_file} sh/symbian-post.h"
1934                 extra_objs="symbian.o"
1935                 extra_parts="crt1.o crti.o crtn.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
1936                 ;;      
1937         esac
1938         # sed el/eb endian suffixes away to avoid confusion with sh[23]e
1939         case `echo ${target} | sed 's/e[lb]-/-/'` in
1940         sh64*-*-netbsd*)        sh_cpu_target=sh5-64media ;;
1941         sh64* | sh5*-*-netbsd*) sh_cpu_target=sh5-32media ;;
1942         sh4a_single_only*)      sh_cpu_target=sh4a-single-only ;;
1943         sh4a_single*)           sh_cpu_target=sh4a-single ;;
1944         sh4a_nofpu*)            sh_cpu_target=sh4a-nofpu ;;
1945         sh4al)                  sh_cpu_target=sh4al ;;
1946         sh4a*)                  sh_cpu_target=sh4a ;;
1947         sh4_single_only*)       sh_cpu_target=sh4-single-only ;;
1948         sh4_single*)            sh_cpu_target=sh4-single ;;
1949         sh4_nofpu*)             sh_cpu_target=sh4-nofpu ;;
1950         sh4* | sh-superh-*)     sh_cpu_target=sh4 ;;
1951         sh3e*)                  sh_cpu_target=sh3e ;;
1952         sh*-*-netbsd* | sh3*)   sh_cpu_target=sh3 ;;
1953         sh2a_single_only*)      sh_cpu_target=sh2a-single-only ;;
1954         sh2a_single*)           sh_cpu_target=sh2a-single ;;
1955         sh2a_nofpu*)            sh_cpu_target=sh2a-nofpu ;;
1956         sh2a*)                  sh_cpu_target=sh2a ;;
1957         sh2e*)                  sh_cpu_target=sh2e ;;
1958         sh2*)                   sh_cpu_target=sh2 ;;
1959         *)                      sh_cpu_target=sh1 ;;
1960         esac
1961         sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`"
1962         case $sh_cpu_default in
1963         sh5-64media-nofpu | sh5-64media | \
1964           sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \
1965           sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
1966           sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
1967           sh4-single-only | sh4-single | sh4-nofpu | sh4 | \
1968           sh3e | sh3 | sh2e | sh2 | sh1) ;;
1969         "")     sh_cpu_default=${sh_cpu_target} ;;
1970         *)      echo "with_cpu=$with_cpu not supported"; exit 1 ;;
1971         esac
1972         sh_multilibs=${with_multilib_list}
1973         if test x${sh_multilibs} = x ; then
1974                 case ${target} in
1975                 sh[1234]*)      sh_multilibs=${sh_cpu_target} ;;
1976                 sh64* | sh5*)   sh_multilibs=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu ;;
1977                 sh-superh-*)    sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;;
1978                 sh*-*-linux*)   sh_multilibs=m1,m3e,m4 ;;
1979                 sh*-*-netbsd*)  sh_multilibs=m3,m3e,m4 ;;
1980                 *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;;
1981                 esac
1982         fi
1983         target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr a-z- A-Z_`
1984         tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"'
1985         sh_multilibs=`echo $sh_multilibs,$sh_cpu_default | sed -e 's/[  ,/][    ,]*/ /g' -e 's/ $//' -e s/^m/sh/ -e 's/ m/ sh/g' | tr A-Z_ a-z-`
1986         for sh_multilib in ${sh_multilibs}; do
1987                 case ${sh_multilib} in
1988                 sh1 | sh2 | sh2e | sh3 | sh3e | \
1989                 sh4 | sh4-single | sh4-single-only | sh4-nofpu | \
1990                 sh4a | sh4a-single | sh4a-single-only | sh4a-nofpu | sh4al | \
1991                 sh2a | sh2a-single | sh2a-single-only | sh2a-nofpu | \
1992                 sh5-64media | sh5-64media-nofpu | \
1993                 sh5-32media | sh5-32media-nofpu | \
1994                 sh5-compact | sh5-compact-nofpu)
1995                         tmake_file="${tmake_file} sh/t-mlib-${sh_multilib}"
1996                         tm_defines="$tm_defines SUPPORT_`echo $sh_multilib|tr a-z- A-Z_`=1"
1997                         ;;
1998                 *)
1999                         echo "with_multilib_list=${sh_multilib} not supported."
2000                         exit 1
2001                         ;;
2002                 esac
2003         done
2004         if test x${enable_incomplete_targets} == xyes ; then
2005                 tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1"
2006         fi
2007         use_fixproto=yes
2008         ;;
2009 sh-*-rtemscoff*)
2010         tmake_file="sh/t-sh t-rtems sh/t-rtems"
2011         tm_file="${tm_file} dbxcoff.h sh/coff.h sh/rtems.h rtems.h"
2012         ;;
2013 sh-*-rtems*)
2014         tmake_file="sh/t-sh sh/t-elf t-rtems sh/t-rtems"
2015         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h"
2016         ;;
2017 sh-wrs-vxworks)
2018         tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks"
2019         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/embed-elf.h sh/vxworks.h"
2020         ;;
2021 sh-*-*)
2022         tm_file="${tm_file} dbxcoff.h sh/coff.h"
2023         use_fixproto=yes
2024         ;;
2025 sparc-*-netbsdelf*)
2026         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2027         extra_options="${extra_options} sparc/long-double-switch.opt"
2028         ;;
2029 sparc64-*-openbsd*)
2030         tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h"
2031         extra_options="${extra_options} sparc/little-endian.opt"
2032         gas=yes gnu_ld=yes
2033         with_cpu=ultrasparc
2034         ;;
2035 sparc-*-elf*)
2036         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h"
2037         tmake_file="sparc/t-elf sparc/t-crtfm"
2038         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2039         use_fixproto=yes
2040         ;;
2041 sparc-*-linux*)         # SPARC's running GNU/Linux, libc6
2042         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h"
2043         extra_options="${extra_options} sparc/long-double-switch.opt"
2044         tmake_file="${tmake_file} sparc/t-crtfm"
2045         ;;
2046 sparc-*-rtems*)
2047         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h"
2048         tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
2049         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2050         ;;
2051 sparc64-*-solaris2* | sparcv9-*-solaris2*)
2052         tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h"
2053         if test x$gnu_ld = xyes; then
2054                 tm_file="${tm_file} sparc/sol2-gld.h sparc/sol2-gld-bi.h"
2055         fi
2056         if test x$gas = xyes; then
2057                 tm_file="${tm_file} sparc/sol2-gas.h sparc/sol2-gas-bi.h"
2058         fi
2059         tm_file="${tm_file} tm-dwarf2.h"
2060         tmake_file="t-sol2 sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm"
2061         if test x$gnu_ld = xyes; then
2062                 tmake_file="$tmake_file t-slibgcc-elf-ver"
2063         else
2064                 tmake_file="$tmake_file t-slibgcc-sld"
2065         fi
2066         c_target_objs="sol2-c.o"
2067         cxx_target_objs="sol2-c.o"
2068         extra_objs="sol2.o"
2069         tm_p_file="${tm_p_file} sol2-protos.h"
2070         extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o"
2071         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2072           "":yes:* | yes:yes:* ) thread_file=posix ;;
2073           "":*:yes | yes:*:yes ) thread_file=solaris ;;
2074         esac
2075         need_64bit_hwint=yes
2076         ;;
2077 sparc-*-solaris2*)
2078         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
2079         case ${target} in
2080         *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2081                 tm_file="${tm_file} sol26.h"
2082         esac
2083         tm_file="${tm_file} sparc/sol2.h"
2084         if test x$gnu_ld = xyes; then
2085                 tm_file="${tm_file} sparc/sol2-gld.h"
2086         fi
2087         if test x$gas = xyes; then
2088                 tm_file="${tm_file} sparc/sol2-gas.h"
2089         fi
2090         tmake_file="t-sol2 sparc/t-sol2 sparc/t-crtfm"
2091         if test x$gnu_ld = xyes; then
2092                 tmake_file="$tmake_file t-slibgcc-elf-ver"
2093         else
2094                 tmake_file="$tmake_file t-slibgcc-sld"
2095         fi
2096         case ${target} in
2097         *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2098                 if test x$gnu_ld = xno; then
2099                         tm_file="${tm_file} sparc/sol26-sld.h"
2100                 fi
2101                 ;;
2102         *-*-solaris2.[789] | *-*-solaris2.1[0-9]*)
2103                 tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h"
2104                 if test x$gnu_ld = xyes; then
2105                         tm_file="${tm_file} sparc/sol2-gld-bi.h"
2106                 fi
2107                 if test x$gas = xyes; then
2108                         tm_file="${tm_file} sparc/sol2-gas-bi.h"
2109                 fi
2110                 tm_file="${tm_file} tm-dwarf2.h"
2111                 tmake_file="$tmake_file sparc/t-sol2-64"
2112                 need_64bit_hwint=yes
2113                 ;;
2114         esac
2115         c_target_objs="sol2-c.o"
2116         cxx_target_objs="sol2-c.o"
2117         extra_objs="sol2.o"
2118         tm_p_file="${tm_p_file} sol2-protos.h"
2119         extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
2120         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2121           "":yes:* | yes:yes:* )
2122                 case ${target} in
2123                   *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2124                         thread_file=posix95
2125                         ;;
2126                   *)
2127                         thread_file=posix
2128                         ;;
2129                 esac
2130                 ;;
2131           "":*:yes | yes:*:yes )
2132                 thread_file=solaris
2133                 ;;
2134         esac
2135         ;;
2136 sparc-*-sysv4*)
2137         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sysv4-only.h"
2138         tmake_file=t-svr4
2139         extra_parts="crtbegin.o crtend.o"
2140         use_fixproto=yes
2141         ;;
2142 sparc64-*-elf*)
2143         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h"
2144         extra_options="${extra_options} sparc/little-endian.opt"
2145         tmake_file="${tmake_file} sparc/t-crtfm"
2146         extra_parts="crtbegin.o crtend.o"
2147         use_fixproto=yes
2148         ;;
2149 sparc64-*-freebsd*|ultrasparc-*-freebsd*)
2150         tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
2151         extra_options="${extra_options} sparc/long-double-switch.opt"
2152         tmake_file="${tmake_file} sparc/t-crtfm"
2153         case "x$with_cpu" in
2154                 xultrasparc) ;;
2155                 x) with_cpu=ultrasparc ;;
2156                 *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
2157         esac
2158         need_64bit_hwint=yes
2159         ;;
2160 sparc64-*-linux*)               # 64-bit SPARC's running GNU/Linux
2161         tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux64.h"
2162         extra_options="${extra_options} sparc/long-double-switch.opt"
2163         tmake_file="${tmake_file} sparc/t-linux64 sparc/t-crtfm"
2164         ;;
2165 sparc64-*-netbsd*)
2166         tm_file="sparc/biarch64.h ${tm_file}"
2167         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2168         extra_options="${extra_options} sparc/long-double-switch.opt"
2169         tmake_file="${tmake_file} sparc/t-netbsd64"
2170         ;;
2171 strongarm-*-elf*)
2172         tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
2173         tmake_file="arm/t-arm arm/t-strongarm-elf"
2174         out_file=arm/arm.c
2175         md_file=arm/arm.md
2176         extra_modes=arm/arm-modes.def
2177         use_fixproto=yes
2178         ;;
2179 strongarm-*-pe)
2180         tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/strongarm-coff.h arm/arm.h arm/pe.h arm/strongarm-pe.h"
2181         tmake_file="arm/t-arm arm/t-strongarm-pe"
2182         out_file=arm/arm.c
2183         md_file=arm/arm.md
2184         extra_modes=arm/arm-modes.def
2185         extra_options="${extra_options} arm/pe.opt"
2186         extra_objs=pe.o
2187         use_fixproto=yes
2188         ;;
2189 strongarm-*-kaos*)
2190         tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-strongarm.h"
2191         tmake_file="arm/t-arm arm/t-strongarm-elf"
2192         out_file=arm/arm.c
2193         md_file=arm/arm.md
2194         extra_modes=arm/arm-modes.def
2195         ;;
2196 v850e1-*-*)
2197         target_cpu_default="TARGET_CPU_v850e1"
2198         tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
2199         tm_p_file=v850/v850-protos.h
2200         tmake_file=v850/t-v850e
2201         md_file=v850/v850.md
2202         out_file=v850/v850.c
2203         extra_options="${extra_options} v850/v850.opt"
2204         if test x$stabs = xyes
2205         then
2206                 tm_file="${tm_file} dbx.h"
2207         fi
2208         use_collect2=no
2209         c_target_objs="v850-c.o"
2210         cxx_target_objs="v850-c.o"
2211         use_fixproto=yes
2212         ;;
2213 v850e-*-*)
2214         target_cpu_default="TARGET_CPU_v850e"
2215         tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
2216         tm_p_file=v850/v850-protos.h
2217         tmake_file=v850/t-v850e
2218         md_file=v850/v850.md
2219         out_file=v850/v850.c
2220         extra_options="${extra_options} v850/v850.opt"
2221         if test x$stabs = xyes
2222         then
2223                 tm_file="${tm_file} dbx.h"
2224         fi
2225         use_collect2=no
2226         c_target_objs="v850-c.o"
2227         cxx_target_objs="v850-c.o"
2228         use_fixproto=yes
2229         ;;
2230 v850-*-*)
2231         target_cpu_default="TARGET_CPU_generic"
2232         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
2233         tmake_file=v850/t-v850
2234         if test x$stabs = xyes
2235         then
2236                 tm_file="${tm_file} dbx.h"
2237         fi
2238         use_collect2=no
2239         c_target_objs="v850-c.o"
2240         cxx_target_objs="v850-c.o"
2241         use_fixproto=yes
2242         ;;
2243 vax-*-bsd*)                     # VAXen running BSD
2244         tm_file="${tm_file} vax/bsd.h"
2245         tmake_file=vax/t-memfuncs
2246         use_collect2=yes
2247         use_fixproto=yes
2248         ;;
2249 vax-*-sysv*)                    # VAXen running system V
2250         tm_file="${tm_file} vax/vaxv.h"
2251         tmake_file=vax/t-memfuncs
2252         use_fixproto=yes
2253         ;;
2254 vax-*-netbsdelf*)
2255         tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
2256         ;;
2257 vax-*-netbsd*)
2258         tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h"
2259         tmake_file=t-netbsd
2260         extra_parts=""
2261         use_collect2=yes
2262         ;;
2263 vax-*-openbsd*)
2264         tm_file="vax/vax.h vax/openbsd1.h openbsd.h vax/openbsd.h"
2265         use_collect2=yes
2266         ;;
2267 vax-*-ultrix*)                  # VAXen running ultrix
2268         tm_file="${tm_file} vax/ultrix.h"
2269         tmake_file=vax/t-memfuncs
2270         use_fixproto=yes
2271         ;;
2272 xscale-*-elf)
2273         tm_file="arm/xscale-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
2274         tmake_file="arm/t-arm arm/t-xscale-elf"
2275         out_file=arm/arm.c
2276         md_file=arm/arm.md
2277         extra_modes=arm/arm-modes.def
2278         use_fixproto=yes
2279         ;;
2280 xscale-*-coff)
2281         tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/xscale-coff.h arm/arm.h"
2282         tmake_file="arm/t-arm arm/t-xscale-coff"
2283         out_file=arm/arm.c
2284         md_file=arm/arm.md
2285         extra_modes=arm/arm-modes.def
2286         use_fixproto=yes
2287         ;;
2288 xstormy16-*-elf)
2289         # For historical reasons, the target files omit the 'x'.
2290         tm_file="dbxelf.h elfos.h svr4.h stormy16/stormy16.h"
2291         tm_p_file=stormy16/stormy16-protos.h
2292         md_file=stormy16/stormy16.md
2293         out_file=stormy16/stormy16.c
2294         extra_options=stormy16/stormy16.opt
2295         tmake_file="stormy16/t-stormy16"
2296         extra_parts="crtbegin.o crtend.o"
2297         use_fixproto=yes
2298         ;;
2299 xtensa-*-elf*)
2300         tm_file="${tm_file} dbxelf.h elfos.h svr4.h xtensa/elf.h"
2301         tmake_file="xtensa/t-xtensa xtensa/t-elf"
2302         ;;
2303 xtensa-*-linux*)
2304         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h xtensa/linux.h"
2305         tmake_file="${tmake_file} xtensa/t-xtensa xtensa/t-linux"
2306         ;;
2307 am33_2.0-*-linux*)
2308         tm_file="mn10300/mn10300.h dbxelf.h elfos.h linux.h mn10300/linux.h"
2309         tmake_file="${tmake_file} mn10300/t-linux"
2310         gas=yes gnu_ld=yes
2311         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
2312         use_collect2=no
2313         ;;
2314 m32c-*-elf*)
2315         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
2316         c_target_objs="m32c-pragma.o"
2317         cxx_target_objs="m32c-pragma.o"
2318         use_fixproto=yes
2319         ;;
2320 *)
2321         echo "*** Configuration ${target} not supported" 1>&2
2322         exit 1
2323         ;;
2324 esac
2325
2326 case ${target} in
2327 i[34567]86-*-linux*aout* | i[34567]86-*-linux*libc1)
2328         tmake_file="${tmake_file} i386/t-gmm_malloc"
2329         ;;
2330 i[34567]86-*-linux* | x86_64-*-linux*)
2331         tmake_file="${tmake_file} i386/t-pmm_malloc"
2332         ;;
2333 i[34567]86-*-* | x86_64-*-*)
2334         tmake_file="${tmake_file} i386/t-gmm_malloc"
2335         ;;
2336 esac
2337
2338 # Support for --with-cpu and related options (and a few unrelated options,
2339 # too).
2340 case ${with_cpu} in
2341   yes | no)
2342     echo "--with-cpu must be passed a value" 1>&2
2343     exit 1
2344     ;;
2345 esac
2346
2347 # If there is no $with_cpu option, try to infer one from ${target}.
2348 # This block sets nothing except for with_cpu.
2349 if test x$with_cpu = x ; then
2350   case ${target} in
2351     ep9312-*-*)
2352       # A Cirrus ARM variant.
2353       with_cpu="ep9312"
2354       ;;
2355     i486-*-*)
2356       with_cpu=i486
2357       ;;
2358     i586-*-*)
2359       case ${target_noncanonical} in
2360         k6_2-*)
2361           with_cpu=k6-2
2362           ;;
2363         k6_3-*)
2364           with_cpu=k6-3
2365           ;;
2366         k6-*)
2367           with_cpu=k6
2368           ;;
2369         pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
2370           with_cpu=pentium-mmx
2371           ;;
2372         *)
2373           with_cpu=pentium
2374           ;;
2375       esac
2376       ;;
2377     i686-*-* | i786-*-*)
2378       case ${target_noncanonical} in
2379         k8-*|opteron-*|athlon_64-*)
2380           with_cpu=k8
2381           ;;
2382         athlon_xp-*|athlon_mp-*|athlon_4-*)
2383           with_cpu=athlon-4
2384           ;;
2385         athlon_tbird-*|athlon-*)
2386           with_cpu=athlon
2387           ;;
2388         pentium2-*)
2389           with_cpu=pentium2
2390           ;;
2391         pentium3-*|pentium3m-*)
2392           with_cpu=pentium3
2393           ;;
2394         pentium4-*|pentium4m-*)
2395           with_cpu=pentium4
2396           ;;
2397         prescott-*)
2398           with_cpu=prescott
2399           ;;
2400         nocona-*)
2401           with_cpu=nocona
2402           ;;
2403         pentium_m-*)
2404           with_cpu=pentium-m
2405           ;;
2406         *)
2407           with_cpu=pentiumpro
2408           ;;
2409       esac
2410       ;;
2411     x86_64-*-*)
2412       with_cpu=k8
2413       ;;
2414     alphaev6[78]*-*-*)
2415       with_cpu=ev67
2416       ;;
2417     alphaev6*-*-*)
2418       with_cpu=ev6
2419       ;;
2420     alphapca56*-*-*)
2421       with_cpu=pca56
2422       ;;
2423     alphaev56*-*-*)
2424       with_cpu=ev56
2425       ;;
2426     alphaev5*-*-*)
2427       with_cpu=ev5
2428       ;;
2429     frv-*-*linux* | frv400-*-*linux*)
2430       with_cpu=fr400
2431       ;;
2432     frv550-*-*linux*)
2433       with_cpu=fr550
2434       ;;
2435     sparc*-*-*)
2436       with_cpu="`echo ${target} | sed 's/-.*$//'`"
2437       if [ x$with_cpu = xsparc64 ]; then
2438         with_cpu=v9
2439       fi
2440       ;;
2441   esac
2442 fi
2443
2444 # Similarly for --with-float
2445 if test x$with_float = x; then
2446         case ${target} in
2447         ep9312-*-*)
2448                 with_float=hard
2449                 ;;
2450         esac
2451 fi
2452
2453 # Similarly for --with-schedule.
2454 if test x$with_schedule = x; then
2455         case ${target} in
2456         hppa1* | parisc1*)
2457                 # Override default PA8000 scheduling model.
2458                 with_schedule=7100LC
2459                 ;;
2460         esac
2461 fi
2462
2463 # Validate and mark as valid any --with options supported
2464 # by this target.  In order to use a particular --with option
2465 # you must list it in supported_defaults; validating the value
2466 # is optional.  This case statement should set nothing besides
2467 # supported_defaults.
2468
2469 supported_defaults=
2470 case "${target}" in
2471         alpha*-*-*)
2472                 supported_defaults="cpu tune"
2473                 for which in cpu tune; do
2474                         eval "val=\$with_$which"
2475                         case "$val" in
2476                         "" \
2477                         | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \
2478                         | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \
2479                         | 21264a)
2480                                 ;;
2481                         *)
2482                                 echo "Unknown CPU used in --with-$which=$val" 1>&2
2483                                 exit 1
2484                                 ;;
2485                         esac
2486                 done
2487                 ;;
2488
2489         arm*-*-*)
2490                 supported_defaults="arch cpu float tune fpu abi"
2491                 for which in cpu tune; do
2492                         # See if it matches any of the entries in arm-cores.def
2493                         eval "val=\$with_$which"
2494                         if [ x"$val" = x ] \
2495                             || grep "^ARM_CORE(\"$val\"," \
2496                                     ${srcdir}/config/arm/arm-cores.def \
2497                                     > /dev/null; then
2498                           # Ok
2499                           new_val=`grep "^ARM_CORE(\"$val\"," \
2500                                 ${srcdir}/config/arm/arm-cores.def | \
2501                                 sed -e 's/^[^,]*,[      ]*//' | \
2502                                 sed -e 's/,.*$//'`
2503                           eval "target_${which}_cname=$new_val"
2504                         echo "For $val real value is $new_val"
2505                           true
2506                         else
2507                           echo "Unknown CPU used in --with-$which=$val" 1>&2
2508                           exit 1
2509                         fi
2510                 done
2511
2512                 case "$with_arch" in
2513                 "" \
2514                 | armv[23456] | armv2a | armv3m | armv4t | armv5t \
2515                 | armv5te | armv6j |armv6k | armv6z | armv6zk \
2516                 | iwmmxt | ep9312)
2517                         # OK
2518                         ;;
2519                 *)
2520                         echo "Unknown arch used in --with-arch=$with_arch" 1>&2
2521                         exit 1
2522                         ;;
2523                 esac
2524
2525                 case "$with_float" in
2526                 "" \
2527                 | soft | hard | softfp)
2528                         # OK
2529                         ;;
2530                 *)
2531                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2532                         exit 1
2533                         ;;
2534                 esac
2535
2536                 case "$with_fpu" in
2537                 "" \
2538                 | fpa | fpe2 | fpe3 | maverick | vfp )
2539                         # OK
2540                         ;;
2541                 *)
2542                         echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1
2543                         exit 1
2544                         ;;
2545                 esac
2546
2547                 case "$with_abi" in
2548                 "" \
2549                 | apcs-gnu | atpcs | aapcs | iwmmxt )
2550                         #OK
2551                         ;;
2552                 *)
2553                         echo "Unknown ABI used in --with-abi=$with_abi"
2554                         exit 1
2555                         ;;
2556                 esac
2557
2558                 if test "x$with_arch" != x && test "x$with_cpu" != x; then
2559                         echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2
2560                 fi
2561                 ;;
2562
2563         fr*-*-*linux*)
2564                 supported_defaults=cpu
2565                 case "$with_cpu" in
2566                 fr400) ;;
2567                 fr550) ;;
2568                 *)
2569                         echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
2570                         exit 1
2571                         ;;
2572                 esac
2573                 ;;
2574
2575         m68k*-linux*)
2576                 supported_defaults="cpu"
2577                 case "$with_cpu" in
2578                 "" | "m68020" | "m68030" | "m68040" | "m68060" | "m68020-40" | "m68020-60")
2579                         # OK
2580                         ;;
2581                 *)
2582                         echo "Unknown CPU used in --with-cpu=$with_cpu, known values:"  1>&2
2583                         echo "m68020 m68030 m68040 m68060 m68020-40 m68020-60" 1>&2
2584                         exit 1
2585                         ;;
2586                 esac
2587                 ;;
2588
2589         hppa*-*-* | parisc*-*-*)
2590                 supported_defaults="arch schedule"
2591
2592                 case "$with_arch" in
2593                 "" | 1.0 | 1.1 | 2.0)
2594                         # OK
2595                         ;;
2596                 *)
2597                         echo "Unknown architecture used in --with-arch=$with_arch" 1>&2
2598                         exit 1
2599                         ;;
2600                 esac
2601
2602                 case "$with_schedule" in
2603                 "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000)
2604                         # OK
2605                         ;;
2606                 *)
2607                         echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2
2608                         exit 1
2609                         ;;
2610                 esac
2611                 ;;
2612
2613         i[34567]86-*-* | x86_64-*-*)
2614                 supported_defaults="arch cpu tune"
2615                 for which in arch cpu tune; do
2616                         eval "val=\$with_$which"
2617                         case ${val} in
2618                         "" | i386 | i486 \
2619                         | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \
2620                         | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
2621                         | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
2622                         | athlon-4 | athlon-xp | athlon-mp | k8 | opteron \
2623                         | athlon64 | athlon-fx | prescott | pentium-m \
2624                         | pentium4m | pentium3m| nocona)
2625                                 # OK
2626                                 ;;
2627                         *)
2628                                 echo "Unknown CPU given in --with-$which=$val." 1>&2
2629                                 exit 1
2630                                 ;;
2631                         esac
2632                 done
2633                 ;;
2634
2635         mips*-*-*)
2636                 supported_defaults="abi arch float tune divide"
2637
2638                 case ${with_float} in
2639                 "" | soft | hard)
2640                         # OK
2641                         ;;
2642                 *)
2643                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2644                         exit 1
2645                         ;;
2646                 esac
2647
2648                 case ${with_abi} in
2649                 "" | 32 | o64 | n32 | 64 | eabi)
2650                         # OK
2651                         ;;
2652                 *)
2653                         echo "Unknown ABI used in --with-abi=$with_abi" 1>&2
2654                         exit 1
2655                         ;;
2656                 esac
2657
2658                 case ${with_divide} in
2659                 "" | breaks | traps)
2660                         # OK
2661                         ;;
2662                 *)
2663                         echo "Unknown division check type use in --with-divide=$with_divide" 1>&2
2664                         exit 1
2665                 esac
2666                 ;;
2667
2668         powerpc*-*-* | rs6000-*-*)
2669                 supported_defaults="cpu float tune"
2670
2671                 for which in cpu tune; do
2672                         eval "val=\$with_$which"
2673                         case ${val} in
2674                         default32 | default64)
2675                                 with_which="with_$which"
2676                                 eval $with_which=
2677                                 ;;
2678                         405cr)
2679                                 tm_defines="${tm_defines} CONFIG_PPC405CR"
2680                                 eval "with_$which=405"
2681                                 ;;
2682                         "" | common \
2683                         | power | power[2345] | powerpc | powerpc64 \
2684                         | rios | rios1 | rios2 | rsc | rsc1 | rs64a \
2685                         | 401 | 403 | 405 | 405fp | 440 | 440fp | 505 \
2686                         | 601 | 602 | 603 | 603e | ec603e | 604 \
2687                         | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
2688                         | 854[08] | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5)
2689                                 # OK
2690                                 ;;
2691                         *)
2692                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
2693                                 exit 1
2694                                 ;;
2695                         esac
2696                 done
2697                 ;;
2698
2699         s390*-*-*)
2700                 supported_defaults="arch mode tune"
2701
2702                 for which in arch tune; do
2703                         eval "val=\$with_$which"
2704                         case ${val} in
2705                         "" | g5 | g6 | z900 | z990 | z9-109)
2706                                 # OK
2707                                 ;;
2708                         *)
2709                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
2710                                 exit 1
2711                                 ;;
2712                         esac
2713                 done
2714
2715                 case ${with_mode} in
2716                 "" | esa | zarch)
2717                         # OK
2718                         ;;
2719                 *)
2720                         echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2
2721                         exit 1
2722                         ;;
2723                 esac
2724                 ;;
2725
2726         sh[123456ble]-*-* | sh-*-*)
2727                 supported_defaults="cpu"
2728                 case "`echo $with_cpu | tr A-Z_ a-z- | sed s/sh/m/`" in
2729                 "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu )
2730                         # OK
2731                         ;;
2732                 m2a | m2a-single | m2a-single-only | m2a-nofpu)
2733                         ;;
2734                 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al)
2735                         ;;
2736                 *)
2737                         echo "Unknown CPU used in --with-cpu=$with_cpu, known values:"  1>&2
2738                         echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2
2739                         echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2
2740                         echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2
2741                         exit 1
2742                         ;;
2743                 esac
2744                 ;;
2745         sparc*-*-*)
2746                 supported_defaults="cpu float tune"
2747
2748                 for which in cpu tune; do
2749                         eval "val=\$with_$which"
2750                         case ${val} in
2751                         "" | sparc | sparcv9 | sparc64 | sparc86x \
2752                         | v7 | cypress | v8 | supersparc | sparclite | f930 \
2753                         | f934 | hypersparc | sparclite86x | sparclet | tsc701 \
2754                         | v9 | ultrasparc | ultrasparc3)
2755                                 # OK
2756                                 ;;
2757                         *)
2758                                 echo "Unknown cpu used in --with-$which=$val" 1>&2
2759                                 exit 1
2760                                 ;;
2761                         esac
2762                 done
2763
2764                 case ${with_float} in
2765                 "" | soft | hard)
2766                         # OK
2767                         ;;
2768                 *)
2769                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2770                         exit 1
2771                         ;;
2772                 esac
2773                 ;;
2774
2775         v850*-*-*)
2776                 supported_defaults=cpu
2777                 case ${with_cpu} in
2778                 "" | v850e | v850e1)
2779                         # OK
2780                         ;;
2781                 *)
2782                         echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
2783                         exit 1
2784                         ;;
2785                 esac
2786                 ;;
2787 esac
2788
2789 # Set some miscellaneous flags for particular targets.
2790 target_cpu_default2=
2791 case ${target} in
2792         alpha*-*-*)
2793                 if test x$gas = xyes
2794                 then
2795                         target_cpu_default2="MASK_GAS"
2796                 fi
2797                 ;;
2798
2799         arm*-*-*)
2800                 if test x$target_cpu_cname = x
2801                 then
2802                         target_cpu_default2=TARGET_CPU_generic
2803                 else
2804                         target_cpu_default2=TARGET_CPU_$target_cpu_cname
2805                 fi
2806                 ;;
2807
2808         m68k*-linux*)
2809                 case "x$with_cpu" in
2810                 x)
2811                         # The most generic
2812                         target_cpu_default2="(MASK_68020|MASK_68881|MASK_BITFIELD)"
2813                         ;;
2814                 xm68020)
2815                         target_cpu_default2="(MASK_68020|MASK_68881|MASK_BITFIELD)"
2816                         ;;
2817                 xm68030)
2818                         target_cpu_default2="(MASK_68030|MASK_68020|MASK_68881|MASK_BITFIELD)"
2819                         ;;
2820                 xm68040)
2821                         target_cpu_default2="(MASK_68040|MASK_68040_ONLY|MASK_68020|MASK_68881|MASK_BITFIELD)"
2822                         ;;
2823                 xm68060)
2824                         target_cpu_default2="(MASK_68060|MASK_68040_ONLY|MASK_68020|MASK_68881|MASK_BITFIELD)"
2825                         ;;
2826                 xm68020-40)
2827                         target_cpu_default2="(MASK_BITFIELD|MASK_68881|MASK_68020|MASK_68040)"
2828                         ;;
2829                 xm68020-60)
2830                         target_cpu_default2="(MASK_BITFIELD|MASK_68881|MASK_68020|MASK_68040|MASK_68060)"
2831                         ;;
2832                 *)
2833                         echo "Unknown CPU used in --with-cpu=$with_cpu"  1>&2
2834                         exit 1
2835                         ;;
2836                 esac
2837                 ;;
2838
2839         hppa*-*-* | parisc*-*-*)
2840                 target_cpu_default2="MASK_BIG_SWITCH"
2841                 if test x$gas = xyes
2842                 then
2843                         target_cpu_default2="${target_cpu_default2}|MASK_GAS|MASK_JUMP_IN_DELAY"
2844                 fi
2845                 ;;
2846
2847         mips*-*-*)
2848                 if test x$gnu_ld = xyes
2849                 then
2850                         target_cpu_default2="MASK_SPLIT_ADDRESSES"
2851                 fi
2852                 case ${target} in
2853                         mips*el-*-*)
2854                                 tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
2855                                 ;;
2856                 esac
2857                 if test "x$enable_gofast" = xyes
2858                 then
2859                         tm_defines="US_SOFTWARE_GOFAST $tm_defines"
2860                         tmake_file="mips/t-gofast $tmake_file"
2861                 else
2862                         tmake_file="mips/t-mips $tmake_file"
2863                 fi
2864                 ;;
2865
2866         powerpc*-*-* | rs6000-*-*)
2867                 # FIXME: The PowerPC port uses the value set at compile time,
2868                 # although it's only cosmetic.
2869                 if test "x$with_cpu" != x
2870                 then
2871                         target_cpu_default2="\\\"$with_cpu\\\""
2872                 fi
2873                 out_file=rs6000/rs6000.c
2874                 c_target_objs="${c_target_objs} rs6000-c.o"
2875                 cxx_target_objs="${cxx_target_objs} rs6000-c.o"
2876                 tmake_file="rs6000/t-rs6000 ${tmake_file}"
2877
2878                 if test x$enable_e500_double = xyes
2879                 then
2880                         tm_file="$tm_file rs6000/e500-double.h"
2881                 fi
2882                 ;;
2883
2884         sparc*-*-*)
2885                 # Some standard aliases.
2886                 case x$with_cpu in
2887                 xsparc)
2888                         with_cpu=v7
2889                         ;;
2890                 xsparcv9 | xsparc64)
2891                         with_cpu=v9
2892                         ;;
2893                 esac
2894
2895                 # The SPARC port checks this value at compile-time.
2896                 target_cpu_default2="TARGET_CPU_$with_cpu"
2897                 ;;
2898         v850*-*-*)
2899                 # FIXME: The v850 is "special" in that it does not support
2900                 # runtime CPU selection, only --with-cpu.
2901                 case "x$with_cpu" in
2902                 x)
2903                         ;;
2904                 xv850e)
2905                         target_cpu_default2="TARGET_CPU_$with_cpu"
2906                         ;;
2907                 esac
2908                 ;;
2909 esac
2910
2911 t=
2912 all_defaults="abi cpu arch tune schedule float mode fpu divide"
2913 for option in $all_defaults
2914 do
2915         eval "val=\$with_$option"
2916         if test -n "$val"; then
2917                 case " $supported_defaults " in
2918                 *" $option "*)
2919                         ;;
2920                 *)
2921                         echo "This target does not support --with-$option." 2>&1
2922                         exit 1
2923                         ;;
2924                 esac
2925
2926                 if test "x$t" = x
2927                 then
2928                         t="{ \"$option\", \"$val\" }"
2929                 else
2930                         t="${t}, { \"$option\", \"$val\" }"
2931                 fi
2932         fi
2933 done
2934
2935 if test "x$t" = x
2936 then
2937         configure_default_options="{ { NULL, NULL} }"
2938 else
2939         configure_default_options="{ ${t} }"
2940 fi
2941
2942 if test "$target_cpu_default2" != ""
2943 then
2944         if test "$target_cpu_default" != ""
2945         then
2946                 target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
2947         else
2948                 target_cpu_default=$target_cpu_default2
2949         fi
2950 fi