OSDN Git Service

31b10d4b5e13a229c00132c72a0b99d328826033
[pf3gnuchains/gcc-fork.git] / gcc / config.gcc
1 # GCC target-specific configuration file.
2 # Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
3 # Free Software Foundation, Inc.
4
5 #This file is part of GCC.
6
7 #GCC is free software; you can redistribute it and/or modify it under
8 #the terms of the GNU General Public License as published by the Free
9 #Software Foundation; either version 2, or (at your option) any later
10 #version.
11
12 #GCC is distributed in the hope that it will be useful, but WITHOUT
13 #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 #FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
15 #for more details.
16
17 #You should have received a copy of the GNU General Public License
18 #along with GCC; see the file COPYING.  If not, write to the Free
19 #Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
20 #02110-1301, USA.
21
22 # This is the GCC target-specific configuration file
23 # where a configuration type is mapped to different system-specific
24 # definitions and files.  This is invoked by the autoconf-generated
25 # configure script.  Putting it in a separate shell file lets us skip
26 # running autoconf when modifying target-specific information.
27
28 # When you change the cases in the OS or target switches, consider
29 # updating ../libgcc/config.host also.
30
31 # This file switches on the shell variable ${target}, and also uses the
32 # following shell variables:
33 #
34 #  with_*               Various variables as set by configure.
35 #
36 #  enable_threads       Either the name, yes or no depending on whether
37 #                       threads support was requested.
38 #
39 #  default_use_cxa_atexit
40 #                         The default value for the $enable___cxa_atexit
41 #                       variable.  enable___cxa_atexit needs to be set to
42 #                       "yes" for the correct operation of C++ destructors
43 #                       but it relies upon the presence of a non-standard C
44 #                       library function called __cxa_atexit.
45 #                         Since not all C libraries provide __cxa_atexit the
46 #                       default value of $default_use_cxa_atexit is set to
47 #                       "no" except for targets which are known to be OK.
48 #
49 #  gas_flag             Either yes or no depending on whether GNU as was
50 #                       requested.
51 #
52 #  gnu_ld_flag          Either yes or no depending on whether GNU ld was
53 #                       requested.
54
55 # This file sets the following shell variables for use by the
56 # autoconf-generated configure script:
57 #
58 #  cpu_type             The name of the cpu, if different from the first
59 #                       chunk of the canonical target name.
60 #
61 #  tm_defines           List of target macros to define for all compilations.
62 #
63 #  tm_file              A list of target macro files, if different from
64 #                       "$cpu_type/$cpu_type.h". Usually it's constructed
65 #                       per target in a way like this:
66 #                       tm_file="${tm_file} dbxelf.h elfos.h svr4.h ${cpu_type.h}/elf.h"
67 #                       Note that the preferred order is:
68 #                       - specific target header "${cpu_type}/${cpu_type.h}"
69 #                       - generic headers like dbxelf.h elfos.h, etc.
70 #                       - specializing target headers like ${cpu_type.h}/elf.h
71 #                       This helps to keep OS specific stuff out of the CPU
72 #                       defining header ${cpu_type}/${cpu_type.h}.
73 #
74 #  tm_p_file            Location of file with declarations for functions
75 #                       in $out_file.
76 #
77 #  out_file             The name of the machine description C support
78 #                       file, if different from "$cpu_type/$cpu_type.c".
79 #
80 #  md_file              The name of the machine-description file, if
81 #                       different from "$cpu_type/$cpu_type.md".
82 #
83 #  tmake_file           A list of machine-description-specific
84 #                       makefile-fragments, if different from
85 #                       "$cpu_type/t-$cpu_type".
86 #
87 #  extra_modes          The name of the file containing a list of extra
88 #                       machine modes, if necessary and different from
89 #                       "$cpu_type/$cpu_type-modes.def".
90 #
91 #  extra_objs           List of extra objects that should be linked into
92 #                       the compiler proper (cc1, cc1obj, cc1plus)
93 #                       depending on target.
94 #
95 #  extra_gcc_objs       List of extra objects that should be linked into
96 #                       the compiler driver (gcc) depending on target.
97 #
98 #  extra_headers        List of used header files from the directory
99 #                       config/${cpu_type}.
100 #
101 #  extra_passes         List of extra executables compiled for this target
102 #                       machine, used for compiling from source to object.
103 #
104 #  extra_parts          List of extra object files that should be compiled
105 #                       for this target machine.
106 #
107 #  extra_programs       Like extra_passes, but these are used when linking.
108 #
109 #  extra_options        List of target-dependent .opt files.
110 #
111 #  c_target_objs        List of extra target-dependent objects that be
112 #                       linked into the C compiler only.
113 #
114 #  cxx_target_objs      List of extra target-dependent objects that be
115 #                       linked into the C++ compiler only.
116 #
117 #  target_gtfiles       List of extra source files with type information.
118 #
119 #  xm_defines           List of macros to define when compiling for the
120 #                       target machine.
121 #
122 #  xm_file              List of files to include when compiling for the
123 #                       target machine.
124 #
125 #  use_collect2         Set to yes or no, depending on whether collect2
126 #                       will be used.
127 #
128 #  target_cpu_default   Set to override the default target model.
129 #
130 #  gdb_needs_out_file_path
131 #                       Set to yes if gdb needs a dir command with
132 #                       `dirname $out_file`.
133 #
134 #  thread_file          Set to control which thread package to use.
135 #
136 #  gas                  Set to yes or no depending on whether the target
137 #                       system normally uses GNU as.
138 #
139 #  need_64bit_hwint     Set to yes if HOST_WIDE_INT must be 64 bits wide
140 #                       for this target.  This is true iff this target
141 #                       supports "long" or "wchar_t" wider than 32 bits.
142 #
143 #  configure_default_options
144 #                       Set to an initializer for configure_default_options
145 #                       in configargs.h, based on --with-cpu et cetera.
146 #
147 #  use_fixproto         Set to "yes" if fixproto should be run normally,
148 #                       "no" if fixproto should never be run.
149
150 # The following variables are used in each case-construct to build up the
151 # outgoing variables:
152 #
153 #  gnu_ld               Set to yes or no depending on whether the target
154 #                       system normally uses GNU ld.
155
156 out_file=
157 tmake_file=
158 extra_headers=
159 extra_passes=
160 extra_parts=
161 extra_programs=
162 extra_objs=
163 extra_gcc_objs=
164 extra_options=
165 c_target_objs=
166 cxx_target_objs=
167 tm_defines=
168 xm_defines=
169 # Set this to force installation and use of collect2.
170 use_collect2=
171 # Set this to override the default target model.
172 target_cpu_default=
173 # Set this if gdb needs a dir command with `dirname $out_file`
174 gdb_needs_out_file_path=
175 # Set this to control which thread package will be used.
176 thread_file=
177 # Reinitialize these from the flag values every loop pass, since some
178 # configure entries modify them.
179 gas="$gas_flag"
180 gnu_ld="$gnu_ld_flag"
181 default_use_cxa_atexit=no
182 target_gtfiles=
183 need_64bit_hwint=
184
185 # Default to not using fixproto.  Targets which need fixproto should
186 # specifically set this to 'yes'.
187 use_fixproto=no
188
189 # Don't carry these over build->host->target.  Please.
190 xm_file=
191 md_file=
192
193 # Obsolete configurations.
194 case ${target} in
195    c4x-*                \
196  | tic4x-*              \
197  )
198     if test "x$enable_obsolete" != xyes; then
199       echo "*** Configuration ${target} is obsolete." >&2
200       echo "*** Specify --enable-obsolete to build it anyway." >&2
201       echo "*** Support will be REMOVED in the next major release of GCC," >&2
202       echo "*** unless a maintainer comes forward." >&2
203       exit 1
204     fi;;
205 esac
206
207 # Unsupported targets list.  Do not put an entry in this list unless
208 # it would otherwise be caught by a more permissive pattern.  The list
209 # should be in alphabetical order.
210 case ${target} in
211    alpha*-*-linux*libc1*                \
212  | i[34567]86-sequent-sysv              \
213  | i[34567]86-sequent-sysv[123]*        \
214  | i[34567]86-go32-*                    \
215  | i[34567]86-*-go32*                   \
216  | m68k-*-linux*aout*                   \
217  | m68k-*-linux*libc1*                  \
218  | mips64orion*-*-rtems*                \
219  | powerpc-*-linux*libc1*               \
220  | sparc-*-linux*aout*                  \
221  | sparc-*-linux*libc1*                 \
222  | sparc-hal-solaris2*                  \
223  | thumb-*-*                            \
224  | *-*-linux*coff*                      \
225  | *-*-linux*oldld*                     \
226  | *-*-rtemsaout*                       \
227  | *-*-rtemscoff*                       \
228  | vax-*-vms*                           \
229  )
230         echo "*** Configuration ${target} not supported" 1>&2
231         exit 1
232         ;;
233 esac
234
235 # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
236 # updated in each machine entry.  Also set default extra_headers for some
237 # machines.
238 tm_p_file=
239 cpu_type=`echo ${target} | sed 's/-.*$//'`
240 cpu_is_64bit=
241 case ${target} in
242 m32c*-*-*)
243         cpu_type=m32c
244         tmake_file=m32c/t-m32c
245         ;;
246 alpha*-*-*)
247         cpu_type=alpha
248         need_64bit_hwint=yes
249         ;;
250 am33_2.0-*-linux*)
251         cpu_type=mn10300
252         ;;
253 strongarm*-*-*)
254         cpu_type=arm
255         ;;
256 arm*-*-*)
257         cpu_type=arm
258         extra_headers="mmintrin.h"
259         ;;
260 bfin*-*)
261         cpu_type=bfin
262         ;;
263 ep9312*-*-*)
264         cpu_type=arm
265         ;;
266 frv*)   cpu_type=frv
267         ;;
268 fido-*-*)
269         cpu_type=m68k
270         extra_headers=math-68881.h
271         ;;
272 xscale-*-*)
273         cpu_type=arm
274         extra_headers="mmintrin.h"
275         ;;
276 i[34567]86-*-*)
277         cpu_type=i386
278         extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
279                        pmmintrin.h tmmintrin.h ammintrin.h"
280         ;;
281 x86_64-*-*)
282         cpu_type=i386
283         extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
284                        pmmintrin.h tmmintrin.h ammintrin.h"
285         need_64bit_hwint=yes
286         ;;
287 ia64-*-*)
288         extra_headers=ia64intrin.h
289         need_64bit_hwint=yes
290         ;;
291 hppa*-*-* | parisc*-*-*)
292         cpu_type=pa
293         ;;
294 m32r*-*-*)
295         cpu_type=m32r
296         ;;
297 m680[012]0-*-*)
298         cpu_type=m68k
299         extra_headers=math-68881.h
300         ;;
301 m68k-*-*)
302         extra_headers=math-68881.h
303         ;;
304 mips*-*-*)
305         cpu_type=mips
306         need_64bit_hwint=yes
307         ;;
308 powerpc*-*-*)
309         cpu_type=rs6000
310         extra_headers="ppc-asm.h altivec.h spe.h"
311         need_64bit_hwint=yes
312         case x$with_cpu in
313             xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[3456]|xpower6x|xrs64a)
314                 cpu_is_64bit=yes
315                 ;;
316         esac
317         ;;
318 rs6000*-*-*)
319         need_64bit_hwint=yes
320         ;;
321 score*-*-*)
322         cpu_type=score
323         ;;
324 sparc64*-*-*)
325         cpu_type=sparc
326         need_64bit_hwint=yes
327         ;;
328 sparc*-*-*)
329         cpu_type=sparc
330         ;;
331 spu*-*-*)
332         cpu_type=spu
333         need_64bit_hwint=yes
334         ;;
335 s390*-*-*)
336         cpu_type=s390
337         need_64bit_hwint=yes
338         ;;
339 # Note the 'l'; we need to be able to match e.g. "shle" or "shl".
340 sh[123456789lbe]*-*-*)
341         cpu_type=sh
342         need_64bit_hwint=yes
343         ;;
344 tic4x-*-*)
345         cpu_type=c4x
346         ;;
347 esac
348
349 tm_file=${cpu_type}/${cpu_type}.h
350 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
351 then
352         tm_p_file=${cpu_type}/${cpu_type}-protos.h
353 fi
354 extra_modes=
355 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
356 then
357         extra_modes=${cpu_type}/${cpu_type}-modes.def
358 fi
359 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt
360 then
361         extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt"
362 fi
363
364 case ${target} in
365 x86_64-*-*)
366         tm_file="i386/biarch64.h ${tm_file}"
367         ;;
368 esac
369
370 # On a.out targets, we need to use collect2.
371 case ${target} in
372 *-*-*aout*)
373         use_collect2=yes
374         ;;
375 esac
376
377 # Common parts for widely ported systems.
378 case ${target} in
379 *-*-darwin*)
380   tm_file="${tm_file} darwin.h"
381   case ${target} in
382   *-*-darwin9*)
383     tm_file="${tm_file} darwin9.h"
384     ;;
385   esac
386   tm_file="${tm_file} ${cpu_type}/darwin.h"
387   tm_p_file="${tm_p_file} darwin-protos.h"
388   tmake_file="t-darwin ${cpu_type}/t-darwin t-slibgcc-darwin"
389   target_gtfiles="\$(srcdir)/config/darwin.c"
390   extra_options="${extra_options} darwin.opt"
391   c_target_objs="darwin-c.o"
392   cxx_target_objs="darwin-c.o"
393   extra_objs="darwin.o"
394   default_use_cxa_atexit=yes
395   case ${enable_threads} in
396     "" | yes | posix) thread_file='posix' ;;
397   esac
398   ;;
399 *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
400   # This is the place-holder for the generic a.out configuration
401   # of FreeBSD.  No actual configuration resides here since
402   # there was only ever a bare-bones ix86 configuration for
403   # a.out and it exists solely in the machine-specific section.
404   # This place-holder must exist to avoid dropping into
405   # the generic ELF configuration of FreeBSD (i.e. it must be
406   # ordered before that section).
407   ;;
408 *-*-freebsd*)
409   # This is the generic ELF configuration of FreeBSD.  Later
410   # machine-specific sections may refine and add to this
411   # configuration.
412   #
413   # Due to tm_file entry ordering issues that vary between cpu
414   # architectures, we only define fbsd_tm_file to allow the
415   # machine-specific section to dictate the final order of all
416   # entries of tm_file with the minor exception that components
417   # of the tm_file set here will always be of the form:
418   #
419   # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
420   #
421   # The machine-specific section should not tamper with this
422   # ordering but may order all other entries of tm_file as it
423   # pleases around the provided core setting.
424   gas=yes
425   gnu_ld=yes
426   extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
427   case ${target} in
428     *-*-freebsd3 | *-*-freebsd[3].*)
429       tm_defines="${tm_defines} FBSD_MAJOR=3" ;;
430     *-*-freebsd4 | *-*-freebsd[4].*)
431       tm_defines="${tm_defines} FBSD_MAJOR=4" ;;
432     *-*-freebsd5 | *-*-freebsd[5].*)
433       tm_defines="${tm_defines} FBSD_MAJOR=5" ;;
434     *-*-freebsd6 | *-*-freebsd[6].*)
435       tm_defines="${tm_defines} FBSD_MAJOR=6" ;;
436     *-*-freebsd7 | *-*-freebsd[7].*)
437       tm_defines="${tm_defines} FBSD_MAJOR=7" ;;
438     *-*-freebsd8 | *-*-freebsd[8].*)
439       tm_defines="${tm_defines} FBSD_MAJOR=8" ;;
440     *-*-freebsd9 | *-*-freebsd[9].*)
441       tm_defines="${tm_defines} FBSD_MAJOR=9" ;;
442     *)
443       echo 'Please update *-*-freebsd* in gcc/config.gcc'
444       exit 1
445       ;;
446   esac
447   tmake_file="t-slibgcc-elf-ver t-freebsd"
448   case ${enable_threads} in
449     no)
450       fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
451       ;;
452     "" | yes | posix)
453       thread_file='posix'
454       tmake_file="${tmake_file} t-freebsd-thread"
455       # Before 5.0, FreeBSD can't bind shared libraries to -lc
456       # when "optionally" threaded via weak pthread_* checks.
457       case ${target} in
458         *-*-freebsd[34] | *-*-freebsd[34].*)
459           tmake_file="${tmake_file} t-slibgcc-nolc-override"
460           ;;
461       esac
462       ;;
463     *)
464       echo 'Unknown thread configuration for FreeBSD'
465       exit 1
466       ;;
467   esac
468   fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h"
469   ;;
470 *-*-linux*libc1* | *-*-linux*aout*)
471   # Avoid the generic linux case.
472   ;;
473 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu)
474   # Must come before *-*-gnu* (because of *-*-linux-gnu* systems).
475   extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
476   extra_options="${extra_options} linux.opt"
477   gas=yes
478   gnu_ld=yes
479   case ${enable_threads} in
480     "" | yes | posix) thread_file='posix' ;;
481   esac
482   tmake_file="t-slibgcc-elf-ver t-linux"
483   case ${target} in
484     *-*-*uclibc*)
485       tm_defines="${tm_defines} UCLIBC_DEFAULT=1"
486       ;;
487     *)
488       tm_defines="${tm_defines} UCLIBC_DEFAULT=0"
489       ;;
490   esac
491   # Assume that glibc or uClibc are being used and so __cxa_atexit is provided.
492   default_use_cxa_atexit=yes
493   ;;
494 *-*-gnu*)
495   # On the Hurd, the setup is just about the same on
496   # each different CPU.  The specific machines that we
497   # support are matched above and just set $cpu_type.
498   tm_file="${cpu_type}/gnu.h"
499   extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
500   # GNU tools are the only tools.
501   gas=yes
502   gnu_ld=yes
503   # These details are the same as for Linux.
504   # But here we need a little extra magic.
505   tmake_file="t-slibgcc-elf-ver t-linux t-gnu"
506   case ${target} in
507     alpha*)
508       tm_file="${cpu_type}/${cpu_type}.h alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h ${tm_file}"
509       ;;
510     i[34567]86-*-*)
511       tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h gnu.h ${tm_file}"
512       ;;
513   esac
514   # Assume that glibc is being used and so __cxa_atexit is provided.
515   default_use_cxa_atexit=yes
516   ;;
517 *-*-netbsd*)
518   tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd t-libgcc-pic"
519   gas=yes
520   gnu_ld=yes
521
522   # NetBSD 2.0 and later get POSIX threads enabled by default.
523   # Allow them to be explicitly enabled on any other version.
524   case ${enable_threads} in
525     "")
526       case ${target} in
527         *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
528           thread_file='posix'
529           tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
530           ;;
531       esac
532       ;;
533     yes | posix)
534       thread_file='posix'
535       tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
536       ;;
537   esac
538
539   # NetBSD 1.7 and later are set up to use GCC's crtstuff for
540   # ELF configurations.  We will clear extra_parts in the
541   # a.out configurations.
542   case ${target} in
543     *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
544       extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
545       ;;
546   esac
547
548   # NetBSD 2.0 and later provide __cxa_atexit(), which we use by
549   # default (unless overridden by --disable-__cxa_atexit).
550   case ${target} in
551     *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
552       default_use_cxa_atexit=yes
553       ;;
554   esac
555   ;;
556 *-*-openbsd*)
557   tmake_file="t-libc-ok t-openbsd t-libgcc-pic"
558   case ${enable_threads} in
559     yes)
560       thread_file='posix'
561       tmake_file="${tmake_file} t-openbsd-thread"
562       ;;
563   esac
564   case ${target} in
565     *-*-openbsd2.*|*-*-openbsd3.[012])
566       tm_defines="${tm_defines} HAS_LIBC_R=1" ;;
567   esac
568   ;;
569 *-*-rtems*)
570   case ${enable_threads} in
571     yes) thread_file='rtems' ;;
572   esac
573   ;;
574 *-*-vxworks*)
575   tmake_file=t-vxworks
576   xm_defines=POSIX
577   extra_options="${extra_options} vxworks.opt"
578   extra_objs=vxworks.o
579   case ${enable_threads} in
580     no) ;;
581     "" | yes | vxworks) thread_file='vxworks' ;;
582     *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
583   esac
584   ;;
585 *-*-elf)
586   # Assume that newlib is being used and so __cxa_atexit is provided.
587   default_use_cxa_atexit=yes
588   ;;
589 esac
590
591 case ${target} in
592 # Support site-specific machine types.
593 *local*)
594         rest=`echo ${target} | sed -e "s/$cpu_type-//"`
595         tm_file=${cpu_type}/$rest.h
596         if test -f $srcdir/config/${cpu_type}/xm-$rest.h
597         then xm_file=${cpu_type}/xm-$rest.h
598         fi
599         if test -f $srcdir/config/${cpu_type}/t-$rest
600         then tmake_file=${cpu_type}/t-$rest
601         fi
602         ;;
603 alpha*-*-unicosmk*)
604         use_collect2=yes
605         tm_file="${tm_file} alpha/unicosmk.h"
606
607         # Don't include t-ieee for now because we don't support that yet
608         # tmake_file="alpha/t-ieee"
609         tmake_file="alpha/t-unicosmk"
610         use_fixproto=yes
611         ;;
612 alpha*-*-linux*)
613         tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
614         target_cpu_default="MASK_GAS"
615         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee alpha/t-linux"
616         ;;
617 alpha*-*-gnu*)
618         target_cpu_default="MASK_GAS"
619         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
620         ;;
621 alpha*-*-freebsd*)
622         tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
623         target_cpu_default="MASK_GAS"
624         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
625         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
626         ;;
627 alpha*-*-netbsd*)
628         tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
629         target_cpu_default="MASK_GAS"
630         tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
631         ;;
632 alpha*-*-openbsd*)
633         tm_defines="${tm_defines} OBSD_NO_DYNAMIC_LIBRARIES OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
634         tm_file="alpha/alpha.h openbsd.h alpha/openbsd.h"
635         # default x-alpha is only appropriate for dec-osf.
636         target_cpu_default="MASK_GAS"
637         tmake_file="alpha/t-alpha alpha/t-ieee"
638         ;;
639 alpha*-dec-osf[45]*)
640         if test x$stabs = xyes
641         then
642                 tm_file="${tm_file} dbx.h"
643         fi
644         if test x$gas != xyes
645         then
646                 extra_passes="mips-tfile mips-tdump"
647         fi
648         use_collect2=yes
649         tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf4"
650         tm_file="${tm_file} alpha/osf.h"
651         extra_headers=va_list.h
652         case ${target} in
653           *-*-osf4*)
654             # Define TARGET_SUPPORT_ARCH except on 4.0a.
655             case ${target} in
656                 *-*-osf4.0a) ;;
657                 *) tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
658             esac
659             ;;
660           *-*-osf5*)
661             tm_file="${tm_file} alpha/osf5.h"
662             tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
663             ;;
664         esac
665         case ${enable_threads} in
666           "" | yes | posix)
667             thread_file='posix'
668             tmake_file="${tmake_file} alpha/t-osf-pthread"
669             ;;
670         esac
671         ;;
672 alpha64-dec-*vms*)
673         tm_file="${tm_file} alpha/vms.h alpha/vms64.h"
674         xm_file="alpha/xm-vms.h"
675         tmake_file="alpha/t-alpha alpha/t-vms alpha/t-vms64 alpha/t-ieee"
676         prefix=/gnu
677         local_prefix=/gnu
678         ;;
679 alpha*-dec-*vms*)
680         tm_file="${tm_file} alpha/vms.h"
681         xm_file=alpha/xm-vms.h
682         tmake_file="alpha/t-alpha alpha/t-vms alpha/t-ieee"
683         prefix=/gnu
684         local_prefix=/gnu
685         ;;
686 arc-*-elf*)
687         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
688         extra_parts="crtinit.o crtfini.o"
689         use_fixproto=yes
690         ;;
691 arm-*-coff* | armel-*-coff*)
692         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h"
693         tmake_file="arm/t-arm arm/t-arm-coff"
694         ;;
695 arm-semi-aof | armel-semi-aof)
696         tm_file="arm/semiaof.h arm/aof.h arm/arm.h"
697         tmake_file="arm/t-arm arm/t-semi"
698         ;;
699 arm-wrs-vxworks)
700         tm_file="dbxelf.h elfos.h svr4.h vxworks.h arm/elf.h arm/aout.h ${tm_file} arm/vxworks.h"
701         tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
702         ;;
703 arm*-*-freebsd*|strongarm*-*-freebsd*)
704         tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
705         tmake_file="${tmake_file} arm/t-arm arm/t-strongarm-elf"
706         ;;
707 arm*-*-netbsdelf*)
708         tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
709         tmake_file="${tmake_file} arm/t-arm arm/t-netbsd"
710         ;;
711 arm*-*-netbsd*)
712         tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h"
713         tmake_file="t-netbsd arm/t-arm arm/t-netbsd"
714         extra_parts=""
715         use_collect2=yes
716         ;;
717 arm*-*-linux*)                  # ARM GNU/Linux with ELF
718         tm_file="dbxelf.h elfos.h linux.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
719         tmake_file="${tmake_file} t-linux arm/t-arm"
720         case ${target} in
721         arm*-*-linux-*eabi)
722             tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h"
723             tmake_file="$tmake_file arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi"
724             # The BPABI long long divmod functions return a 128-bit value in
725             # registers r0-r3.  Correctly modeling that requires the use of
726             # TImode.
727             need_64bit_hwint=yes
728             # The EABI requires the use of __cxa_atexit.
729             default_use_cxa_atexit=yes
730             ;;
731         *)
732             tmake_file="$tmake_file arm/t-linux"
733             ;;
734         esac
735         tm_file="$tm_file arm/aout.h arm/arm.h"
736         ;;
737 arm*-*-uclinux*)                # ARM ucLinux
738         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h arm/uclinux-elf.h"
739         tmake_file="arm/t-arm arm/t-arm-elf"
740         case ${target} in
741         arm*-*-uclinux-*eabi)
742             tm_file="$tm_file arm/bpabi.h arm/uclinux-eabi.h"
743             tmake_file="$tmake_file arm/t-bpabi"
744             # The BPABI long long divmod functions return a 128-bit value in
745             # registers r0-r3.  Correctly modeling that requires the use of
746             # TImode.
747             need_64bit_hwint=yes
748             # The EABI requires the use of __cxa_atexit.
749             default_use_cxa_atexit=yes
750         esac
751         tm_file="$tm_file arm/aout.h arm/arm.h"
752         ;;
753 arm*-*-ecos-elf)
754         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
755         tmake_file="arm/t-arm arm/t-arm-elf"
756         ;;
757 arm*-*-eabi* | arm*-*-symbianelf* )
758         # The BPABI long long divmod functions return a 128-bit value in
759         # registers r0-r3.  Correctly modeling that requires the use of
760         # TImode.
761         need_64bit_hwint=yes
762         default_use_cxa_atexit=yes
763         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
764         tmake_file="arm/t-arm arm/t-arm-elf"
765         case ${target} in
766         arm*-*-eabi*)
767           tmake_file="${tmake_file} arm/t-bpabi"
768           ;;
769         arm*-*-symbianelf*)
770           tm_file="${tm_file} arm/symbian.h"
771           # We do not include t-bpabi for Symbian OS because the system
772           # provides its own implementation of the BPABI functions.
773           tmake_file="${tmake_file} arm/t-symbian"
774           ;;
775         esac
776         tm_file="${tm_file} arm/aout.h arm/arm.h"
777         ;;
778 arm*-*-rtems*)
779         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h"
780         tmake_file="arm/t-arm arm/t-arm-elf t-rtems arm/t-rtems"
781         ;;
782 arm*-*-elf | ep9312-*-elf)
783         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
784         tmake_file="arm/t-arm arm/t-arm-elf"
785         ;;
786 arm*-wince-pe*)
787         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h"
788         tmake_file="arm/t-arm arm/t-wince-pe"
789         extra_options="${extra_options} arm/pe.opt"
790         extra_objs="pe.o"
791         ;;
792 arm-*-pe*)
793         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h"
794         tmake_file="arm/t-arm arm/t-pe"
795         extra_options="${extra_options} arm/pe.opt"
796         extra_objs="pe.o"
797         ;;
798 arm*-*-kaos*)
799         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-arm.h"
800         tmake_file="arm/t-arm arm/t-arm-elf"
801         ;;
802 avr-*-rtems*)
803         tm_file="avr/avr.h dbxelf.h avr/rtems.h rtems.h"
804         tmake_file="avr/t-avr t-rtems avr/t-rtems"
805         ;;
806 avr-*-*)
807         tm_file="avr/avr.h dbxelf.h"
808         use_fixproto=yes
809         ;;
810 bfin*-elf*)
811         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
812         tmake_file=bfin/t-bfin-elf
813         use_collect2=no
814         ;;
815 bfin*-uclinux*)
816         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/uclinux.h"
817         tmake_file=bfin/t-bfin-uclinux
818         use_collect2=no
819         ;;
820 bfin*-linux-uclibc*)
821         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h linux.h bfin/linux.h"
822         tmake_file="t-slibgcc-elf-ver bfin/t-bfin-linux"
823         use_collect2=no
824         ;;
825 bfin*-rtems*)
826         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h"
827         tmake_file="bfin/t-bfin t-rtems bfin/t-rtems"
828         ;;
829 bfin*-*)
830         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
831         tmake_file=bfin/t-bfin
832         use_collect2=no
833         ;;
834 c4x-*-rtems* | tic4x-*-rtems*)
835         tmake_file="c4x/t-c4x t-rtems c4x/t-rtems"
836         tm_file="c4x/c4x.h c4x/rtems.h rtems.h"
837         c_target_objs="c4x-c.o"
838         cxx_target_objs="c4x-c.o"
839         ;;
840 c4x-* | tic4x-*)
841         tmake_file=c4x/t-c4x
842         c_target_objs="c4x-c.o"
843         cxx_target_objs="c4x-c.o"
844         ;;
845 cris-*-aout)
846         tm_file="dbxelf.h ${tm_file} cris/aout.h"
847         gas=yes
848         tmake_file="cris/t-cris cris/t-aout"
849         extra_options="${extra_options} cris/aout.opt"
850         ;;
851 cris-*-elf | cris-*-none)
852         tm_file="dbxelf.h elfos.h ${tm_file}"
853         tmake_file="cris/t-cris cris/t-elfmulti"
854         gas=yes
855         extra_options="${extra_options} cris/elf.opt"
856         ;;
857 cris-*-linux*)
858         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h"
859         # We need to avoid using t-linux, so override default tmake_file
860         tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
861         extra_options="${extra_options} cris/linux.opt"
862         ;;
863 crx-*-elf)
864         tm_file="elfos.h ${tm_file}"
865         extra_parts="crtbegin.o crtend.o"
866         use_collect2=no
867         ;;
868 fr30-*-elf)
869         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
870         tmake_file=fr30/t-fr30
871         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
872         use_fixproto=yes
873         ;;
874 frv-*-elf)
875         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} frv/frv-abi.h"
876         tmake_file=frv/t-frv
877         use_fixproto=yes
878         ;;
879 frv-*-*linux*)
880         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} \
881                  linux.h frv/linux.h frv/frv-abi.h"
882         tmake_file="${tmake_file} frv/t-frv frv/t-linux"
883         ;;
884 h8300-*-rtemscoff*)
885         tmake_file="h8300/t-h8300 t-rtems h8300/t-rtems"
886         tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h h8300/rtems.h rtems.h"
887         ;;
888 h8300-*-rtems*)
889         tmake_file="h8300/t-h8300 h8300/t-elf t-rtems h8300/t-rtems"
890         tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h"
891         ;;
892 h8300-*-elf*)
893         tmake_file="h8300/t-h8300 h8300/t-elf"
894         tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h"
895         use_fixproto=yes
896         ;;
897 h8300-*-*)
898         tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h"
899         use_fixproto=yes
900         ;;
901 hppa*64*-*-linux* | parisc*64*-*-linux*)
902         target_cpu_default="MASK_PA_11|MASK_PA_20"
903         tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \
904                  pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h pa/pa64-linux.h"
905         tmake_file="${tmake_file} pa/t-linux64"
906         gas=yes gnu_ld=yes
907         need_64bit_hwint=yes
908         ;;
909 hppa*-*-linux* | parisc*-*-linux*)
910         target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
911         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \
912                  pa/pa32-regs.h pa/pa32-linux.h"
913         tmake_file="${tmake_file} pa/t-linux"
914         # Set the libgcc version number
915         if test x$sjlj = x1; then
916             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
917         else
918             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
919         fi
920         ;;
921 # port not yet contributed.
922 #hppa*-*-openbsd*)
923 #       target_cpu_default="MASK_PA_11"
924 #       ;;
925 hppa1.1-*-pro*)
926         target_cpu_default="MASK_PORTABLE_RUNTIME|MASK_NO_SPACE_REGS|MASK_SOFT_FLOAT"
927         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h \
928                  pa/pa-pro-end.h libgloss.h"
929         tmake_file="pa/t-pro"
930         ;;
931 hppa1.1-*-osf*)
932         target_cpu_default="MASK_PA_11"
933         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-osf.h"
934         tmake_file="pa/t-pa"
935         use_collect2=yes
936         ;;
937 hppa1.1-*-bsd*)
938         target_cpu_default="MASK_PA_11"
939         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h"
940         tmake_file="pa/t-pa"
941         use_collect2=yes
942         ;;
943 hppa[12]*-*-hpux10*)
944         case ${target} in
945         hppa1.1-*-* | hppa2*-*-*)
946                 target_cpu_default="MASK_PA_11"
947                 ;;
948         esac
949         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
950                  pa/pa-hpux.h pa/pa-hpux10.h"
951         extra_options="${extra_options} pa/pa-hpux.opt"
952         case ${target} in
953         *-*-hpux10.[1-9]*)
954                 tm_file="${tm_file} pa/pa-hpux1010.h"
955                 extra_options="${extra_options} pa/pa-hpux1010.opt"
956                 ;;
957         esac
958         tmake_file="pa/t-pa-hpux10 pa/t-pa-hpux pa/t-hpux-shlib"
959         case ${enable_threads} in
960           "")
961             if test x$have_pthread_h = xyes ; then
962               tmake_file="${tmake_file} pa/t-dce-thr"
963             fi
964             ;;
965           yes | dce)
966             tmake_file="${tmake_file} pa/t-dce-thr"
967             ;;
968         esac
969         # Set the libgcc version number
970         if test x$sjlj = x1; then
971             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
972         else
973             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
974         fi
975         use_collect2=yes
976         use_fixproto=yes
977         gas=yes
978         ;;
979 hppa*64*-*-hpux11*)
980         target_cpu_default="MASK_PA_11|MASK_PA_20"
981         if test x$gnu_ld = xyes
982         then
983                 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
984         fi
985         tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
986                  pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
987                  pa/pa-hpux11.h"
988         case ${target} in
989         *-*-hpux11.[1-9]*)
990                 tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
991                 extra_options="${extra_options} pa/pa-hpux1111.opt"
992                 ;;
993         *)
994                 tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
995                 ;;
996         esac
997         extra_options="${extra_options} pa/pa-hpux.opt \
998                        pa/pa-hpux1010.opt pa/pa64-hpux.opt"
999         need_64bit_hwint=yes
1000         tmake_file="pa/t-pa64 pa/t-pa-hpux pa/t-hpux-shlib"
1001         # Set the libgcc version number
1002         if test x$sjlj = x1; then
1003             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1004         else
1005             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1006         fi
1007         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o \
1008                      libgcc_stub.a"
1009         case x${enable_threads} in
1010         x | xyes | xposix )
1011                 thread_file=posix
1012                 ;;
1013         esac
1014         gas=yes
1015         ;;
1016 hppa[12]*-*-hpux11*)
1017         case ${target} in
1018         hppa1.1-*-* | hppa2*-*-*)
1019                 target_cpu_default="MASK_PA_11"
1020                 ;;
1021         esac
1022         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
1023                  pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h"
1024         extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt"
1025         case ${target} in
1026         *-*-hpux11.[1-9]*)
1027                 tm_file="${tm_file} pa/pa-hpux1111.h"
1028                 extra_options="${extra_options} pa/pa-hpux1111.opt"
1029                 ;;
1030         esac
1031         tmake_file="pa/t-pa-hpux11 pa/t-pa-hpux pa/t-hpux-shlib"
1032         # Set the libgcc version number
1033         if test x$sjlj = x1; then
1034             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1035         else
1036             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1037         fi
1038         case x${enable_threads} in
1039         x | xyes | xposix )
1040                 thread_file=posix
1041                 ;;
1042         esac
1043         use_collect2=yes
1044         gas=yes
1045         ;;
1046 i[34567]86-*-darwin*)
1047         need_64bit_hwint=yes
1048
1049         # This is so that '.../configure && make' doesn't fail due to
1050         # config.guess deciding that the configuration is i386-*-darwin* and
1051         # then this file using that to set --with-cpu=i386 which has no -m64
1052         # support.
1053         with_arch=${with_arch:-nocona}
1054         with_cpu=${with_cpu:-generic}
1055         ;;
1056 x86_64-*-darwin*)
1057         with_arch=${with_arch:-nocona}
1058         with_cpu=${with_cpu:-generic}
1059         tmake_file="t-darwin ${cpu_type}/t-darwin64 t-slibgcc-darwin"
1060         tm_file="${tm_file} ${cpu_type}/darwin64.h"
1061         ;;
1062 i[34567]86-*-elf*)
1063         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h"
1064         tmake_file="i386/t-i386elf t-svr4"
1065         use_fixproto=yes
1066         ;;
1067 i[34567]86-sequent-ptx4* | i[34567]86-sequent-sysv4*)
1068         if test x$gas = xyes
1069         then
1070                 tm_file="${tm_file} usegas.h"
1071         fi
1072         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ptx4.h i386/ptx4-i.h"
1073         tmake_file=t-svr4
1074         extra_parts="crtbegin.o crtend.o"
1075         use_fixproto=yes
1076         ;;
1077 i[34567]86-*-aout*)
1078         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/i386-aout.h"
1079         use_fixproto=yes
1080         ;;
1081 i[34567]86-*-beoself* | i[34567]86-*-beos*)
1082         tmake_file='i386/t-beos i386/t-crtpic'
1083         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/beos-elf.h"
1084         extra_parts='crtbegin.o crtend.o'
1085         ;;
1086 i[34567]86-*-freebsd*)
1087         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
1088         ;;
1089 x86_64-*-freebsd*)
1090         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
1091         ;;
1092 i[34567]86-*-netbsdelf*)
1093         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
1094         ;;
1095 i[34567]86-*-netbsd*)
1096         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h"
1097         tmake_file=t-netbsd
1098         extra_parts=""
1099         use_collect2=yes
1100         ;;
1101 x86_64-*-netbsd*)
1102         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
1103         ;;
1104 i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123])
1105         tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h"
1106         # needed to unconfuse gdb
1107         tmake_file="t-libc-ok t-openbsd i386/t-openbsd"
1108         # we need collect2 until our bug is fixed...
1109         use_collect2=yes
1110         ;;
1111 i[34567]86-*-openbsd*)
1112         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
1113         tm_file="${tm_file} openbsd.h i386/openbsdelf.h"
1114         gas=yes
1115         gnu_ld=yes
1116         ;;
1117 i[34567]86-*-coff*)
1118         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/i386-coff.h"
1119         use_fixproto=yes
1120         ;;
1121 i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu)
1122                         # Intel 80386's running GNU/*
1123                         # with ELF format using glibc 2
1124         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h"
1125         case ${target} in
1126         i[34567]86-*-linux*)
1127                 if test x$enable_targets = xall; then
1128                         tm_file="${tm_file} i386/x86-64.h i386/linux64.h"
1129                         tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1130                         tmake_file="${tmake_file} i386/t-linux64"
1131                         need_64bit_hwint=yes
1132                         # FIXME: -m64 for i[34567]86-*-* should be allowed just
1133                         # like -m32 for x86_64-*-*.
1134                         case X"${with_cpu}" in
1135                         Xgeneric|Xcore2|Xnocona|Xx86-64|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx)
1136                                 ;;
1137                         X)
1138                                 with_cpu=generic
1139                                 ;;
1140                         *)
1141                                 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1142                                 echo "generic core2 nocona x86-64 amdfam10 barcelona k8 opteron athlon64 athlon-fx" 1>&2
1143                                 exit 1
1144                                 ;;
1145                         esac
1146                 else
1147                         tm_file="${tm_file} i386/linux.h"
1148                 fi
1149                 ;;
1150         i[34567]86-*-knetbsd*-gnu) tm_file="${tm_file} i386/linux.h knetbsd-gnu.h i386/knetbsd-gnu.h" ;;
1151         i[34567]86-*-kfreebsd*-gnu) tm_file="${tm_file} i386/linux.h kfreebsd-gnu.h i386/kfreebsd-gnu.h" ;;
1152         esac
1153         tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtpc i386/t-crtfm t-dfprules"
1154         ;;
1155 x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
1156         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h \
1157                  i386/x86-64.h i386/linux64.h"
1158         case ${target} in
1159         x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h" ;;
1160         x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;;
1161         esac
1162         tmake_file="${tmake_file} i386/t-linux64 i386/t-crtpc i386/t-crtfm t-dfprules"
1163         ;;
1164 i[34567]86-*-gnu*)
1165         ;;
1166 i[34567]86-pc-msdosdjgpp*)
1167         xm_file=i386/xm-djgpp.h
1168         tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h"
1169         tmake_file=i386/t-djgpp
1170         extra_options="${extra_options} i386/djgpp.opt"
1171         gnu_ld=yes
1172         gas=yes
1173         ;;
1174 i[34567]86-*-lynxos*)
1175         xm_defines=POSIX
1176         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
1177         tmake_file="i386/t-crtstuff t-lynx"
1178         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1179         extra_options="${extra_options} lynx.opt"
1180         thread_file=lynx
1181         gnu_ld=yes
1182         gas=yes
1183         ;;
1184 i[3456x]86-*-netware*)
1185         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h tm-dwarf2.h i386/netware.h"
1186         tmake_file=i386/t-netware
1187         extra_objs=netware.o
1188         case /${with_ld} in
1189         */nwld)
1190                 extra_objs="$extra_objs nwld.o"
1191                 tm_file="${tm_file} i386/nwld.h"
1192                 tmake_file="${tmake_file} i386/t-nwld"
1193                 extra_parts="crt0.o libgcc.def libc.def libcpre.def posixpre.def"
1194                 ;;
1195         esac
1196         case x${enable_threads} in
1197         x | xyes | xposix) thread_file='posix';;
1198         xnks) thread_file='nks';;
1199         xno) ;;
1200         *) echo 'Unknown thread configuration for NetWare' >&2; exit 1;;
1201         esac
1202         ;;
1203 i[34567]86-*-nto-qnx*)
1204         tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h svr4.h i386/unix.h i386/nto.h"
1205         tmake_file=i386/t-nto
1206         gnu_ld=yes
1207         gas=yes
1208         ;;
1209 i[34567]86-*-rtems*)
1210         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h"
1211         extra_parts="crtbegin.o crtend.o crti.o crtn.o"
1212         tmake_file="i386/t-rtems-i386 i386/t-crtstuff t-rtems"
1213         ;;
1214 i[34567]86-*-sco3.2v5*) # 80386 running SCO Open Server 5
1215         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/sco5.h"
1216         if test x$gas = xyes
1217         then
1218                 tm_file="usegas.h ${tm_file}"
1219         fi
1220         tmake_file=i386/t-sco5
1221         extra_parts="crtbegin.o crtend.o"
1222         extra_options="${extra_options} i386/sco5.opt"
1223         use_fixproto=yes
1224         ;;
1225 i[34567]86-*-solaris2*)
1226         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h"
1227         case ${target} in
1228         *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
1229                 tm_file="${tm_file} sol2-6.h"
1230                 ;;
1231         *-*-solaris2.1[0-9]*)
1232                 tm_file="${tm_file} sol2-10.h"
1233                 ;;
1234         esac
1235         tm_file="${tm_file} i386/sol2.h"
1236         tmake_file="t-sol2 i386/t-sol2 t-svr4"
1237         c_target_objs="sol2-c.o"
1238         cxx_target_objs="sol2-c.o"
1239         extra_objs="sol2.o"
1240         tm_p_file="${tm_p_file} sol2-protos.h"
1241         if test x$gnu_ld = xyes; then
1242                 tmake_file="$tmake_file t-slibgcc-elf-ver"
1243                 tm_defines="${tm_defines} TARGET_GNU_LD=1"
1244         else
1245                 tmake_file="$tmake_file t-slibgcc-sld"
1246         fi
1247         if test x$gas = xyes; then
1248                 tm_file="usegas.h ${tm_file}"
1249         fi
1250         case ${target} in
1251         *-*-solaris2.[789] | *-*-solaris2.1[0-9]*)
1252                 tm_file="$tm_file tm-dwarf2.h"
1253                 ;;
1254         esac
1255         case ${target} in
1256         *-*-solaris2.1[0-9]*)
1257                 tm_file="${tm_file} i386/x86-64.h i386/sol2-10.h"
1258                 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1259                 tmake_file="$tmake_file i386/t-sol2-10"
1260                 need_64bit_hwint=yes
1261                 # FIXME: -m64 for i[34567]86-*-* should be allowed just
1262                 # like -m32 for x86_64-*-*.
1263                 case X"${with_cpu}" in
1264                 Xgeneric|Xcore2|Xnocona|Xx86-64|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx)
1265                         ;;
1266                 X)
1267                         with_cpu=generic
1268                         ;;
1269                 *)
1270                         echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1271                         echo "generic core2 nocona x86-64 amdfam10 barcelona k8 opteron athlon64 athlon-fx" 1>&2
1272                         exit 1
1273                         ;;
1274                 esac
1275                 # Solaris 2.10 provides crt1.o, crti.o, crtn.o, and gcrt1.o as
1276                 # part of the base system.
1277                 extra_parts="gmon.o crtbegin.o crtend.o"
1278                 ;;
1279         *)
1280                 extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
1281                 ;;
1282         esac
1283         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
1284           "":yes:* | yes:yes:* )
1285                 case ${target} in
1286                   *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
1287                         thread_file=posix95
1288                         ;;
1289                   *)
1290                         thread_file=posix
1291                         ;;
1292                 esac
1293                 ;;
1294           "":*:yes | yes:*:yes )
1295                 thread_file=solaris
1296                 ;;
1297         esac
1298         ;;
1299 i[34567]86-*-sysv5*)           # Intel x86 on System V Release 5
1300        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv5.h"
1301        if test x$stabs = xyes
1302        then
1303                tm_file="${tm_file} dbx.h"
1304        fi
1305        tmake_file="i386/t-crtpic t-svr4"
1306        extra_parts="crtbegin.o crtend.o"
1307        if test x$enable_threads = xyes; then
1308                thread_file='posix'
1309        fi
1310         use_fixproto=yes
1311        ;;
1312 i[34567]86-*-sysv4*)            # Intel 80386's running system V.4
1313         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv4-cpp.h"
1314         if test x$stabs = xyes
1315         then
1316                 tm_file="${tm_file} dbx.h"
1317         fi
1318         tmake_file="i386/t-crtpic t-svr4"
1319         extra_parts="crtbegin.o crtend.o"
1320         use_fixproto=yes
1321         ;;
1322 i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae)
1323         tm_file="${tm_file} i386/unix.h i386/att.h elfos.h svr4.h vx-common.h"
1324         case ${target} in
1325           *-vxworksae*)
1326             tm_file="${tm_file} vxworksae.h i386/vx-common.h i386/vxworksae.h"
1327             tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae"
1328             ;;
1329           *)
1330             tm_file="${tm_file} vxworks.h i386/vx-common.h i386/vxworks.h"
1331             tmake_file="${tmake_file} i386/t-vxworks"
1332             ;;
1333         esac
1334         ;;
1335 i[34567]86-*-pe | i[34567]86-*-cygwin*)
1336         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h"
1337         xm_file=i386/xm-cygwin.h
1338         tmake_file="i386/t-cygwin i386/t-cygming"
1339         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1340         extra_options="${extra_options} i386/cygming.opt"
1341         extra_objs="winnt.o winnt-stubs.o"
1342         c_target_objs=cygwin2.o
1343         cxx_target_objs="cygwin2.o winnt-cxx.o"
1344         extra_gcc_objs=cygwin1.o
1345         if test x$enable_threads = xyes; then
1346                 thread_file='posix'
1347         fi
1348         ;;
1349 i[34567]86-*-mingw32* | x86_64-*-mingw32*)
1350         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h"
1351         xm_file=i386/xm-mingw32.h
1352         tmake_file="i386/t-cygming i386/t-mingw32"
1353         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1354         extra_options="${extra_options} i386/cygming.opt"
1355         extra_objs="winnt.o winnt-stubs.o"
1356         cxx_target_objs=winnt-cxx.o
1357         default_use_cxa_atexit=yes
1358         case ${enable_threads} in
1359           "" | yes | win32)
1360           thread_file='win32'
1361           tmake_file="${tmake_file} i386/t-gthr-win32"
1362           ;;
1363         esac
1364         case ${target} in
1365                 *mingw32crt*)
1366                         tm_file="${tm_file} i386/crtdll.h"
1367                         ;;
1368                 *mingw32msv* | *mingw32*)
1369                         ;;
1370         esac
1371         ;;
1372 i[34567]86-*-uwin*)
1373         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygwin.h i386/uwin.h"
1374         tmake_file="i386/t-cygwin i386/t-uwin"
1375         extra_objs=winnt.o
1376         extra_options="${extra_options} i386/cygming.opt"
1377         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1378         if test x$enable_threads = xyes; then
1379                 thread_file='win32'
1380         fi
1381         use_fixproto=yes
1382         ;;
1383 i[34567]86-*-interix3*)
1384         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
1385         tmake_file="i386/t-interix"
1386         extra_objs=winnt.o
1387         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1388         if test x$enable_threads = xyes ; then
1389                 thread_file='posix'
1390         fi
1391         if test x$stabs = xyes ; then
1392                 tm_file="${tm_file} dbxcoff.h"
1393         fi
1394         ;;
1395 i[34567]86-*-kaos*)
1396         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h kaos.h i386/kaos-i386.h"
1397         tmake_file="i386/t-i386elf t-svr4"
1398         ;;
1399 ia64*-*-elf*)
1400         tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/elf.h"
1401         tmake_file="ia64/t-ia64"
1402         target_cpu_default="0"
1403         if test x$gas = xyes
1404         then
1405                 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1406         fi
1407         if test x$gnu_ld = xyes
1408         then
1409                 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1410         fi
1411         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1412         use_fixproto=yes
1413         ;;
1414 ia64*-*-freebsd*)
1415         tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
1416         target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1417         tmake_file="${tmake_file} ia64/t-ia64"
1418         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1419         ;;
1420 ia64*-*-linux*)
1421         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h ia64/sysv4.h ia64/linux.h"
1422         tmake_file="${tmake_file} ia64/t-ia64 t-libunwind ia64/t-glibc"
1423         if test x$with_system_libunwind != xyes ; then
1424                 tmake_file="${tmake_file} t-libunwind-elf ia64/t-glibc-libunwind"
1425         fi
1426         target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1427         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1428         ;;
1429 ia64*-*-hpux*)
1430         tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h"
1431         tmake_file="ia64/t-ia64 ia64/t-hpux"
1432         target_cpu_default="MASK_GNU_AS"
1433         case x$enable_threads in
1434         x | xyes | xposix )
1435                 thread_file=posix
1436                 ;;
1437         esac
1438         use_collect2=no
1439         c_target_objs="ia64-c.o"
1440         cxx_target_objs="ia64-c.o"
1441         extra_options="${extra_options} ia64/ilp32.opt"
1442         # If we decide to run fixproto we should define FIXPROTO_DEFINES
1443         # in ia64/t-hpux, and also fix the definition of putenv in
1444         # sys-protos.h (const char not char).
1445         ;;
1446 iq2000*-*-elf*)
1447         tm_file="svr4.h elfos.h iq2000/iq2000.h"
1448         tmake_file=iq2000/t-iq2000
1449         out_file=iq2000/iq2000.c
1450         md_file=iq2000/iq2000.md
1451         use_fixproto=yes
1452         ;;
1453 m32r-*-elf*)
1454         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1455         extra_parts="crtinit.o crtfini.o"
1456         use_fixproto=yes
1457         ;;
1458 m32rle-*-elf*)
1459         tm_file="dbxelf.h elfos.h svr4.h m32r/little.h ${tm_file}"
1460         extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o"
1461         use_fixproto=yes
1462         ;;
1463 m32r-*-linux*)
1464         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} m32r/linux.h"
1465         # We override the tmake_file for linux -- why?
1466         tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1467         gnu_ld=yes
1468         use_fixproto=yes
1469         if test x$enable_threads = xyes; then
1470                 thread_file='posix'
1471         fi
1472         ;;
1473 m32rle-*-linux*)
1474         tm_file="dbxelf.h elfos.h svr4.h linux.h m32r/little.h ${tm_file} m32r/linux.h"
1475         # We override the tmake_file for linux -- why?
1476         tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1477         gnu_ld=yes
1478         use_fixproto=yes
1479         if test x$enable_threads = xyes; then
1480                 thread_file='posix'
1481         fi
1482         ;;
1483 # m68hc11 and m68hc12 share the same machine description.
1484 m68hc11-*-*|m6811-*-*)
1485         tm_file="dbxelf.h elfos.h m68hc11/m68hc11.h"
1486         tm_p_file="m68hc11/m68hc11-protos.h"
1487         md_file="m68hc11/m68hc11.md"
1488         out_file="m68hc11/m68hc11.c"
1489         tmake_file="m68hc11/t-m68hc11-gas"
1490         use_fixproto=yes
1491         ;;
1492 m68hc12-*-*|m6812-*-*)
1493         tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h m68hc11/m68hc11.h"
1494         tm_p_file="m68hc11/m68hc11-protos.h"
1495         md_file="m68hc11/m68hc11.md"
1496         out_file="m68hc11/m68hc11.c"
1497         tmake_file="m68hc11/t-m68hc11-gas"
1498         extra_options="${extra_options} m68hc11/m68hc11.opt"
1499         use_fixproto=yes
1500         ;;
1501 m68k-*-aout*)
1502         default_m68k_cpu=68020
1503         default_cf_cpu=5206
1504         tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-mlibs"
1505         tm_file="${tm_file} m68k/m68k-none.h m68k/m68kemb.h m68k/m68k-aout.h libgloss.h"
1506         ;;
1507 m68k-*-coff*)
1508         default_m68k_cpu=68020
1509         default_cf_cpu=5206
1510         tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-mlibs"
1511         tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
1512         tm_file="${tm_file} m68k/m68k-none.h m68k/m68kemb.h dbxcoff.h m68k/coff.h dbx.h"
1513         use_fixproto=yes
1514         ;;
1515 m68020-*-elf* | m68k-*-elf* | fido-*-elf*)
1516         case ${target} in
1517         fido-*-elf*)
1518                 # Check that $with_cpu makes sense.
1519                 case $with_cpu in
1520                 "" | "fidoa")
1521                         ;;
1522                 *)
1523                         echo "Cannot accept --with-cpu=$with_cpu"
1524                         exit 1
1525                         ;;
1526                 esac
1527                 with_cpu=fidoa
1528                 ;;
1529         *)
1530                 default_m68k_cpu=68020
1531                 default_cf_cpu=5206
1532                 ;;
1533         esac
1534         tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h"
1535         tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
1536         tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-m68kelf"
1537         # Add multilibs for targets other than fido.
1538         case ${target} in
1539         fido-*-elf*)
1540                 ;;
1541         *)
1542                 tmake_file="$tmake_file m68k/t-mlibs"
1543                 ;;
1544         esac
1545         extra_parts="crtbegin.o crtend.o"
1546         ;;
1547 m68010-*-netbsdelf* | m68k*-*-netbsdelf*)
1548         default_m68k_cpu=68020
1549         default_cf_cpu=5475
1550         tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
1551         tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
1552         ;;
1553 m68k*-*-openbsd*)
1554         default_m68k_cpu=68020
1555         default_cf_cpu=5475
1556         # needed to unconfuse gdb
1557         tm_defines="${tm_defines} OBSD_OLD_GAS"
1558         tm_file="${tm_file} openbsd.h m68k/openbsd.h"
1559         tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
1560         # we need collect2 until our bug is fixed...
1561         use_collect2=yes
1562         ;;
1563 m68k-*-uclinuxoldabi*)          # Motorola m68k/ColdFire running uClinux
1564                                 # with uClibc, using the original
1565                                 # m68k-elf-based ABI
1566         default_m68k_cpu=68020
1567         default_cf_cpu=5206
1568         tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux-oldabi.h"
1569         tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
1570         tmake_file="m68k/t-floatlib m68k/t-uclinux"
1571         use_fixproto=no
1572         ;;
1573 m68k-*-uclinux*)                # Motorola m68k/ColdFire running uClinux
1574                                 # with uClibc, using the new GNU/Linux-style
1575                                 # ABI.
1576         default_m68k_cpu=68020
1577         default_cf_cpu=5206
1578         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h"
1579         tm_defines="${tm_defines} MOTOROLA=1 USE_GAS UCLIBC_DEFAULT=1"
1580         extra_options="${extra_options} linux.opt"
1581         tmake_file="m68k/t-floatlib m68k/t-uclinux m68k/t-mlibs"
1582         use_fixproto=no
1583         ;;
1584 m68k-*-linux*)          # Motorola m68k's running GNU/Linux
1585                                 # with ELF format using glibc 2
1586                                 # aka the GNU/Linux C library 6.
1587         default_m68k_cpu=68020
1588         default_cf_cpu=5475
1589         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h m68k/linux.h"
1590         extra_options="${extra_options} m68k/ieee.opt"
1591         tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
1592         # if not configured with --enable-sjlj-exceptions, bump the
1593         # libgcc version number
1594         if test x$sjlj != x1; then
1595             tmake_file="$tmake_file m68k/t-slibgcc-elf-ver"
1596         fi
1597         ;;
1598 m68k-*-rtems*)
1599         default_m68k_cpu=68020
1600         default_cf_cpu=5206
1601         tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems m68k/t-mlibs"
1602         tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h"
1603         tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
1604         extra_parts="crtbegin.o crtend.o"
1605         ;;
1606 mcore-*-elf)
1607         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} mcore/mcore-elf.h"
1608         tmake_file=mcore/t-mcore
1609         use_fixproto=yes
1610         ;;
1611 mcore-*-pe*)
1612         tm_file="svr3.h dbxcoff.h ${tm_file} mcore/mcore-pe.h"
1613         tmake_file=mcore/t-mcore-pe
1614         use_fixproto=yes
1615         ;;
1616 mips-sgi-irix[56]*)
1617         tm_file="elfos.h ${tm_file} mips/iris.h"
1618         tmake_file="mips/t-iris mips/t-slibgcc-irix"
1619         target_cpu_default="MASK_ABICALLS"
1620         case ${target} in
1621         *-*-irix5*)
1622                 tm_file="${tm_file} mips/iris5.h"
1623                 ;;
1624
1625         *-*-irix6*)
1626                 tm_file="${tm_file} mips/iris6.h"
1627                 tmake_file="${tmake_file} mips/t-iris6"
1628                 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
1629                 ;;
1630         esac
1631         if test "x$stabs" = xyes
1632         then
1633                 tm_file="${tm_file} dbx.h mips/dbxmdebug.h"
1634         fi
1635         if test "x$gnu_ld" = xyes
1636         then
1637                 tm_defines="${tm_defines} IRIX_USING_GNU_LD"
1638         fi
1639 #       if test x$enable_threads = xyes; then
1640 #               thread_file='irix'
1641 #       fi
1642         use_fixproto=yes
1643         ;;
1644 mips*-*-netbsd*)                        # NetBSD/mips, either endian.
1645         target_cpu_default="MASK_ABICALLS"
1646         tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
1647         ;;
1648 mips64*-*-linux*)
1649         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h mips/linux64.h"
1650         tmake_file="${tmake_file} mips/t-linux64"
1651         tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_N32"
1652         gnu_ld=yes
1653         gas=yes
1654         ;;
1655 mips*-*-linux*)                         # Linux MIPS, either endian.
1656         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h"
1657         case ${target} in
1658         mipsisa32*-*)
1659                 target_cpu_default="MASK_SOFT_FLOAT"
1660                 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1661                 ;;
1662         esac
1663         ;;
1664 mips*-*-openbsd*)
1665         tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
1666         target_cpu_default="MASK_ABICALLS"
1667         tm_file="mips/mips.h openbsd.h mips/openbsd.h mips/sdb.h"
1668         case ${target} in
1669         mips*el-*-openbsd*)
1670             tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";;
1671         *)  tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";;
1672         esac
1673         ;;
1674 mipsisa32-*-elf* | mipsisa32el-*-elf*)
1675         tm_file="elfos.h ${tm_file} mips/elf.h"
1676         tmake_file=mips/t-isa3264
1677         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_EABI"
1678         use_fixproto=yes
1679         ;;
1680 mipsisa32r2-*-elf* | mipsisa32r2el-*-elf*)
1681         tm_file="elfos.h ${tm_file} mips/elf.h"
1682         tmake_file=mips/t-isa3264
1683         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_EABI"
1684         use_fixproto=yes
1685         ;;
1686 mipsisa64-*-elf* | mipsisa64el-*-elf*)
1687         tm_file="elfos.h ${tm_file} mips/elf.h"
1688         tmake_file=mips/t-isa3264
1689         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1690         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_EABI"
1691         use_fixproto=yes
1692         ;;
1693 mipsisa64sr71k-*-elf*)
1694         tm_file="elfos.h ${tm_file} mips/elf.h"
1695         tmake_file=mips/t-sr71k
1696         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1697         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
1698         use_fixproto=yes
1699         ;;
1700 mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
1701         tm_file="elfos.h ${tm_file} mips/elf.h"
1702         tmake_file="mips/t-elf mips/t-sb1"
1703         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1704         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
1705         use_fixproto=yes
1706         ;;
1707 mips-*-elf* | mipsel-*-elf*)
1708         tm_file="elfos.h ${tm_file} mips/elf.h"
1709         tmake_file=mips/t-elf
1710         use_fixproto=yes
1711         ;;
1712 mips64-*-elf* | mips64el-*-elf*)
1713         tm_file="elfos.h ${tm_file} mips/elf.h"
1714         tmake_file=mips/t-elf
1715         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1716         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1717         use_fixproto=yes
1718         ;;
1719 mips64vr-*-elf* | mips64vrel-*-elf*)
1720         tm_file="mips/vr.h elfos.h ${tm_file} mips/elf.h"
1721         tmake_file=mips/t-vr
1722         use_fixproto=yes
1723         ;;
1724 mips64orion-*-elf* | mips64orionel-*-elf*)
1725         tm_file="elfos.h ${tm_file} mips/elforion.h mips/elf.h"
1726         tmake_file=mips/t-elf
1727         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1728         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1729         use_fixproto=yes
1730         ;;
1731 mips*-*-rtems*)
1732         tm_file="elfos.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
1733         tmake_file="mips/t-elf t-rtems mips/t-rtems"
1734         ;;
1735 mips-wrs-vxworks)
1736         tm_file="elfos.h ${tm_file} svr4.h mips/elf.h vx-common.h vxworks.h mips/vxworks.h"
1737         tmake_file="${tmake_file} mips/t-vxworks"
1738         ;;
1739 mips-wrs-windiss)       # Instruction-level simulator for VxWorks.
1740         xm_defines=POSIX
1741         tm_file="elfos.h mips/mips.h svr4.h mips/elf.h windiss.h mips/windiss.h"
1742         tmake_file="${tmake_file} mips/t-elf"
1743         thread_file=
1744         ;;
1745 mipstx39-*-elf* | mipstx39el-*-elf*)
1746         tm_file="elfos.h ${tm_file} mips/r3900.h mips/elf.h"
1747         tmake_file=mips/t-r3900
1748         use_fixproto=yes
1749         ;;
1750 mmix-knuth-mmixware)
1751         need_64bit_hwint=yes
1752         ;;
1753 mn10300-*-*)
1754         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1755         if test x$stabs = xyes
1756         then
1757                 tm_file="${tm_file} dbx.h"
1758         fi
1759         use_collect2=no
1760         use_fixproto=yes
1761         ;;
1762 mt-*-elf)
1763         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1764         tmake_file="${tmake_file} mt/t-mt"
1765         ;;
1766 ns32k-*-netbsdelf*)
1767         echo "GCC does not yet support the ${target} target"; exit 1
1768         ;;
1769 ns32k-*-netbsd*)
1770         tm_file="${tm_file} netbsd.h netbsd-aout.h ns32k/netbsd.h"
1771         # On NetBSD, the headers are already okay, except for math.h.
1772         tmake_file="t-netbsd ns32k/t-ns32k"
1773         extra_parts=""
1774         use_collect2=yes
1775         ;;
1776 pdp11-*-bsd)
1777         tm_file="${tm_file} pdp11/2bsd.h"
1778         use_fixproto=yes
1779         ;;
1780 pdp11-*-*)
1781         use_fixproto=yes
1782         ;;
1783 # port not yet contributed
1784 #powerpc-*-openbsd*)
1785 #       tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit "
1786 #       extra_headers=
1787 #       ;;
1788 powerpc64-*-linux*)
1789         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1790         test x$with_cpu != x || cpu_is_64bit=yes
1791         test x$cpu_is_64bit != xyes || tm_file="${tm_file} rs6000/default64.h"
1792         tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
1793         if test x${enable_secureplt} = xyes; then
1794                 tm_file="rs6000/secureplt.h ${tm_file}"
1795         fi
1796         extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
1797         tmake_file="t-dfprules rs6000/t-fprules ${tmake_file} rs6000/t-ppccomm rs6000/t-linux64 rs6000/t-fprules-softfp soft-fp/t-softfp"
1798         ;;
1799 powerpc64-*-gnu*)
1800         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux64.h rs6000/gnu.h"
1801         extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
1802         tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-gnu rs6000/t-linux64 rs6000/t-fprules-softfp soft-fp/t-softfp"
1803         ;;
1804 powerpc-*-beos*)
1805         tm_file="${tm_file} rs6000/aix.h rs6000/beos.h rs6000/xcoff.h"
1806         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-beos"
1807         extra_headers=
1808         use_fixproto=yes
1809         ;;
1810 powerpc-*-darwin*)
1811         extra_options="${extra_options} rs6000/darwin.opt"
1812         extra_parts="crt2.o"
1813         case ${target} in
1814           *-darwin1[0-9]* | *-darwin[8-9]*)
1815             tmake_file="${tmake_file} rs6000/t-darwin8"
1816             tm_file="${tm_file} rs6000/darwin8.h"
1817             ;;
1818           *-darwin7*)
1819             tm_file="${tm_file} rs6000/darwin7.h"
1820             ;;
1821           *-darwin[0-6]*)
1822             ;;
1823         esac
1824         extra_headers=altivec.h
1825         ;;
1826 powerpc64-*-darwin*)
1827         tm_file="${tm_file} ${cpu_type}/darwin8.h ${cpu_type}/darwin64.h"
1828         extra_options="${extra_options} ${cpu_type}/darwin.opt"
1829         # We're omitting t-darwin8 to avoid building any multilibs
1830         extra_headers=altivec.h
1831         ;;
1832 powerpc*-*-freebsd*)
1833         tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
1834         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1835         extra_options="${extra_options} rs6000/sysv4.opt"
1836         ;;
1837 powerpc-*-netbsd*)
1838         tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
1839         tmake_file="${tmake_file} rs6000/t-netbsd"
1840         extra_options="${extra_options} rs6000/sysv4.opt"
1841         ;;
1842 powerpc-*-chorusos*)
1843         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h chorus.h"
1844         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos rs6000/t-ppccomm"
1845         extra_options="${extra_options} rs6000/sysv4.opt"
1846         case ${enable_threads} in
1847           yes | posix)
1848             thread_file='posix'
1849             ;;
1850         esac
1851         use_fixproto=yes
1852         ;;
1853 powerpc-*-eabispe*)
1854         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabispe.h"
1855         extra_options="${extra_options} rs6000/sysv4.opt"
1856         tmake_file="rs6000/t-spe rs6000/t-ppccomm"
1857         ;;
1858 powerpc-*-eabisimaltivec*)
1859         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h rs6000/eabialtivec.h"
1860         extra_options="${extra_options} rs6000/sysv4.opt"
1861         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
1862         ;;
1863 powerpc-*-eabisim*)
1864         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
1865         extra_options="${extra_options} rs6000/sysv4.opt"
1866         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1867         ;;
1868 powerpc-*-elf*)
1869         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1870         extra_options="${extra_options} rs6000/sysv4.opt"
1871         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1872         use_fixproto=yes
1873         ;;
1874 powerpc-*-eabialtivec*)
1875         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabialtivec.h"
1876         extra_options="${extra_options} rs6000/sysv4.opt"
1877         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
1878         ;;
1879 powerpc-*-eabi*)
1880         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
1881         extra_options="${extra_options} rs6000/sysv4.opt"
1882         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1883         ;;
1884 powerpc-*-rtems*)
1885         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/rtems.h rtems.h"
1886         extra_options="${extra_options} rs6000/sysv4.opt"
1887         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-rtems t-rtems rs6000/t-ppccomm"
1888         ;;
1889 powerpc-*-linux*altivec*)
1890         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h"
1891         extra_options="${extra_options} rs6000/sysv4.opt"
1892         tmake_file="rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1893         ;;
1894 powerpc-*-linux*spe*)
1895         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxspe.h rs6000/e500.h"
1896         extra_options="${extra_options} rs6000/sysv4.opt"
1897         tmake_file="rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1898         ;;
1899 powerpc-*-linux*)
1900         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1901         extra_options="${extra_options} rs6000/sysv4.opt"
1902         tmake_file="t-dfprules rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1903         case ${enable_targets}:${cpu_is_64bit} in
1904             *powerpc64* | all:* | *:yes)
1905                 if test x$cpu_is_64bit = xyes; then
1906                     tm_file="${tm_file} rs6000/default64.h"
1907                 fi
1908                 tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
1909                 tmake_file="$tmake_file rs6000/t-linux64"
1910                 extra_options="${extra_options} rs6000/linux64.opt"
1911                 ;;
1912             *)
1913                 tm_file="${tm_file} rs6000/linux.h"
1914                 ;;
1915         esac
1916         if test x${enable_secureplt} = xyes; then
1917                 tm_file="rs6000/secureplt.h ${tm_file}"
1918         fi
1919         ;;
1920 powerpc-*-gnu-gnualtivec*)
1921         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h"
1922         extra_options="${extra_options} rs6000/sysv4.opt"
1923         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1924         if test x$enable_threads = xyes; then
1925                 thread_file='posix'
1926         fi
1927         ;;
1928 powerpc-*-gnu*)
1929         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h"
1930         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1931         extra_options="${extra_options} rs6000/sysv4.opt"
1932         if test x$enable_threads = xyes; then
1933                 thread_file='posix'
1934         fi
1935         ;;
1936 powerpc-wrs-vxworks|powerpc-wrs-vxworksae)
1937         tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1938         tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppccomm rs6000/t-vxworks"
1939         extra_options="${extra_options} rs6000/sysv4.opt"
1940         extra_headers=ppc-asm.h
1941         case ${target} in
1942           *-vxworksae*)
1943             tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/e500.h rs6000/vxworksae.h"
1944             tmake_file="${tmake_file} rs6000/t-vxworksae"
1945             ;;
1946           *-vxworks*)
1947             tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h rs6000/e500.h"
1948             ;;
1949         esac
1950         ;;
1951 powerpc-wrs-windiss*)  # Instruction-level simulator for VxWorks.
1952         tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/windiss.h"
1953         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1954         extra_options="${extra_options} rs6000/sysv4.opt"
1955         thread_file=""
1956         use_fixproto=yes
1957         ;;
1958 powerpc-*-lynxos*)
1959         xm_defines=POSIX
1960         tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
1961         tmake_file="t-lynx rs6000/t-lynx"
1962         extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
1963         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1964         extra_options="${extra_options} lynx.opt"
1965         thread_file=lynx
1966         gnu_ld=yes
1967         gas=yes
1968         ;;
1969 powerpcle-*-sysv*)
1970         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
1971         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos rs6000/t-ppccomm"
1972         extra_options="${extra_options} rs6000/sysv4.opt"
1973         use_fixproto=yes
1974         ;;
1975 powerpcle-*-elf*)
1976         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
1977         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1978         extra_options="${extra_options} rs6000/sysv4.opt"
1979         use_fixproto=yes
1980         ;;
1981 powerpcle-*-eabisim*)
1982         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
1983         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1984         extra_options="${extra_options} rs6000/sysv4.opt"
1985         ;;
1986 powerpcle-*-eabi*)
1987         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h"
1988         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1989         extra_options="${extra_options} rs6000/sysv4.opt"
1990         ;;
1991 powerpc-*-kaos*)
1992         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h kaos.h rs6000/kaos-ppc.h"
1993         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1994         extra_options="${extra_options} rs6000/sysv4.opt"
1995         ;;
1996 powerpcle-*-kaos*)
1997         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h kaos.h rs6000/kaos-ppc.h"
1998         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1999         extra_options="${extra_options} rs6000/sysv4.opt"
2000         ;;
2001 rs6000-ibm-aix4.[12]* | powerpc-ibm-aix4.[12]*)
2002         tm_file="${tm_file} rs6000/aix.h rs6000/aix41.h rs6000/xcoff.h"
2003         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-newas"
2004         extra_options="${extra_options} rs6000/aix41.opt"
2005         use_collect2=yes
2006         extra_headers=
2007         use_fixproto=yes
2008         ;;
2009 rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
2010         tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h"
2011         tmake_file=rs6000/t-aix43
2012         extra_options="${extra_options} rs6000/aix64.opt"
2013         use_collect2=yes
2014         thread_file='aix'
2015         extra_headers=
2016         ;;
2017 rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
2018         tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h"
2019         extra_options="${extra_options} rs6000/aix64.opt"
2020         tmake_file=rs6000/t-aix43
2021         use_collect2=yes
2022         thread_file='aix'
2023         extra_headers=
2024         ;;
2025 rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*)
2026         tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h"
2027         tmake_file=rs6000/t-aix52
2028         extra_options="${extra_options} rs6000/aix64.opt"
2029         use_collect2=yes
2030         thread_file='aix'
2031         extra_headers=
2032         ;;
2033 s390-*-linux*)
2034         tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
2035         tmake_file="${tmake_file} t-dfprules s390/t-crtstuff s390/t-linux"
2036         ;;
2037 s390x-*-linux*)
2038         tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
2039         tm_p_file=s390/s390-protos.h
2040         md_file=s390/s390.md
2041         extra_modes=s390/s390-modes.def
2042         out_file=s390/s390.c
2043         tmake_file="${tmake_file} t-dfprules s390/t-crtstuff s390/t-linux s390/t-linux64"
2044         ;;
2045 s390x-ibm-tpf*)
2046         tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h s390/tpf.h"
2047         tm_p_file=s390/s390-protos.h
2048         md_file=s390/s390.md
2049         extra_modes=s390/s390-modes.def
2050         out_file=s390/s390.c
2051         extra_parts="crtbeginS.o crtendS.o"
2052         tmake_file="s390/t-crtstuff s390/t-tpf"
2053         thread_file='tpf'
2054         extra_options="${extra_options} s390/tpf.opt"
2055         ;;
2056 score-*-elf)
2057         tm_file="dbxelf.h elfos.h score/elf.h score/score.h"
2058         tmake_file=score/t-score-elf
2059         extra_objs="score-mdaux.o"
2060         ;;
2061 sh-*-elf* | sh[12346l]*-*-elf* | sh*-*-kaos* | \
2062 sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \
2063   sh-*-linux* | sh[346lbe]*-*-linux* | \
2064   sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
2065    sh64-*-netbsd* | sh64l*-*-netbsd*)
2066         tmake_file="${tmake_file} sh/t-sh sh/t-elf"
2067         if test x${with_endian} = x; then
2068                 case ${target} in
2069                 sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;;
2070                 shbe-*-* | sheb-*-*)               with_endian=big,little ;;
2071                 sh[1234]l* | sh[34]*-*-linux*)     with_endian=little ;;
2072                 shl* | sh64l* | sh*-*-linux* | \
2073                   sh5l* | sh-superh-elf)           with_endian=little,big ;;
2074                 sh[1234]*-*-*)                     with_endian=big ;;
2075                 *)                                 with_endian=big,little ;;
2076                 esac
2077         fi
2078         case ${with_endian} in
2079         big|little)     tmake_file="${tmake_file} sh/t-1e" ;;
2080         big,little|little,big) ;;
2081         *)      echo "with_endian=${with_endian} not supported."; exit 1 ;;
2082         esac
2083         case ${with_endian} in
2084         little*)        tm_file="sh/little.h ${tm_file}" ;;
2085         esac
2086         tm_file="${tm_file} dbxelf.h elfos.h"
2087         case ${target} in
2088         sh*-*-netbsd*)  ;;
2089         *)              tm_file="${tm_file} svr4.h" ;;
2090         esac
2091         tm_file="${tm_file} sh/elf.h"
2092         case ${target} in
2093         sh*-*-linux*)   tmake_file="${tmake_file} sh/t-linux"
2094                         tm_file="${tm_file} linux.h sh/linux.h" ;;
2095         sh*-*-kaos*)    tm_file="${tm_file} sh/embed-elf.h kaos.h sh/kaos-sh.h"
2096                         ;;
2097         sh*-*-netbsd*)  tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h" ;;
2098         sh*-superh-elf) if test x$with_libgloss != xno; then
2099                                 with_libgloss=yes
2100                                 tm_file="${tm_file} sh/newlib.h"
2101                         fi
2102                         tm_file="${tm_file} sh/embed-elf.h sh/superh.h"
2103                         tmake_file="${tmake_file} sh/t-superh"
2104                         extra_options="${extra_options} sh/superh.opt" ;;
2105         *)              if test x$with_newlib = xyes \
2106                            && test x$with_libgloss = xyes; then
2107                                 tm_file="${tm_file} sh/newlib.h"
2108                         fi
2109                         tm_file="${tm_file} sh/embed-elf.h" ;;
2110         esac
2111         case ${target} in
2112         sh5*-*-netbsd*)
2113                 # SHmedia, 32-bit ABI
2114                 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd"
2115                 ;;
2116         sh64*-netbsd*)
2117                 # SHmedia, 64-bit ABI
2118                 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd sh/t-netbsd-sh5-64"
2119                 ;;
2120         *-*-netbsd)
2121                 tmake_file="${tmake_file} sh/t-netbsd"
2122                 ;;
2123         sh64*-*-linux*)
2124                 tmake_file="${tmake_file} sh/t-sh64 sh/t-linux64"
2125                 tm_file="${tm_file} sh/sh64.h"
2126                 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2127                 ;;
2128         sh64*)
2129                 tmake_file="${tmake_file} sh/t-sh64"
2130                 tm_file="${tm_file} sh/sh64.h"
2131                 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2132                 ;;
2133         *-*-symbianelf*)
2134                 tmake_file="sh/t-symbian"
2135                 tm_file="sh/symbian-pre.h sh/little.h ${tm_file} sh/symbian-post.h"
2136                 extra_objs="symbian.o"
2137                 extra_parts="crt1.o crti.o crtn.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
2138                 ;;
2139         esac
2140         # sed el/eb endian suffixes away to avoid confusion with sh[23]e
2141         case `echo ${target} | sed 's/e[lb]-/-/'` in
2142         sh64*-*-netbsd*)        sh_cpu_target=sh5-64media ;;
2143         sh64* | sh5*-*-netbsd*) sh_cpu_target=sh5-32media ;;
2144         sh4a_single_only*)      sh_cpu_target=sh4a-single-only ;;
2145         sh4a_single*)           sh_cpu_target=sh4a-single ;;
2146         sh4a_nofpu*)            sh_cpu_target=sh4a-nofpu ;;
2147         sh4al)                  sh_cpu_target=sh4al ;;
2148         sh4a*)                  sh_cpu_target=sh4a ;;
2149         sh4_single_only*)       sh_cpu_target=sh4-single-only ;;
2150         sh4_single*)            sh_cpu_target=sh4-single ;;
2151         sh4_nofpu*)             sh_cpu_target=sh4-nofpu ;;
2152         sh4* | sh-superh-*)     sh_cpu_target=sh4 ;;
2153         sh3e*)                  sh_cpu_target=sh3e ;;
2154         sh*-*-netbsd* | sh3*)   sh_cpu_target=sh3 ;;
2155         sh2a_single_only*)      sh_cpu_target=sh2a-single-only ;;
2156         sh2a_single*)           sh_cpu_target=sh2a-single ;;
2157         sh2a_nofpu*)            sh_cpu_target=sh2a-nofpu ;;
2158         sh2a*)                  sh_cpu_target=sh2a ;;
2159         sh2e*)                  sh_cpu_target=sh2e ;;
2160         sh2*)                   sh_cpu_target=sh2 ;;
2161         *)                      sh_cpu_target=sh1 ;;
2162         esac
2163         # did the user say --without-fp ?
2164         if test x$with_fp = xno; then
2165                 case ${sh_cpu_target} in
2166                 sh5-*media)     sh_cpu_target=${sh_cpu_target}-nofpu ;;
2167                 sh4al | sh1)    ;;
2168                 sh4a* )         sh_cpu_target=sh4a-nofpu ;;
2169                 sh4*)           sh_cpu_target=sh4-nofpu ;;
2170                 sh3*)           sh_cpu_target=sh3 ;;
2171                 sh2a*)          sh_cpu_target=sh2a-nofpu ;;
2172                 sh2*)           sh_cpu_target=sh2 ;;
2173                 *)      echo --without-fp not available for $target: ignored
2174                 esac
2175                 tm_defines="$tm_defines STRICT_NOFPU=1"
2176         fi
2177         sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`"
2178         case $sh_cpu_default in
2179         sh5-64media-nofpu | sh5-64media | \
2180           sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \
2181           sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
2182           sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
2183           sh4-single-only | sh4-single | sh4-nofpu | sh4 | sh4-300 | \
2184           sh3e | sh3 | sh2e | sh2 | sh1) ;;
2185         "")     sh_cpu_default=${sh_cpu_target} ;;
2186         *)      echo "with_cpu=$with_cpu not supported"; exit 1 ;;
2187         esac
2188         sh_multilibs=${with_multilib_list}
2189         if test x${sh_multilibs} = x ; then
2190                 case ${target} in
2191                 sh64-superh-linux* | \
2192                 sh[1234]*)      sh_multilibs=${sh_cpu_target} ;;
2193                 sh64* | sh5*)   sh_multilibs=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu ;;
2194                 sh-superh-*)    sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;;
2195                 sh*-*-linux*)   sh_multilibs=m1,m3e,m4 ;;
2196                 sh*-*-netbsd*)  sh_multilibs=m3,m3e,m4 ;;
2197                 *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;;
2198                 esac
2199                 if test x$with_fp = xno; then
2200                         sh_multilibs="`echo $sh_multilibs|sed -e s/m4/sh4-nofpu/ -e s/,m4-[^,]*//g -e s/,m[23]e// -e s/m2a,m2a-single/m2a-nofpu/ -e s/m5-..m....,//g`"
2201                 fi
2202         fi
2203         target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`
2204         tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"'
2205         sh_multilibs=`echo $sh_multilibs,$sh_cpu_default | sed -e 's/[  ,/][    ,]*/ /g' -e 's/ $//' -e 's/^m/sh/' -e 's/ m/ sh/g' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-`
2206         for sh_multilib in ${sh_multilibs}; do
2207                 case ${sh_multilib} in
2208                 sh1 | sh2 | sh2e | sh3 | sh3e | \
2209                 sh4 | sh4-single | sh4-single-only | sh4-nofpu | sh4-300 |\
2210                 sh4a | sh4a-single | sh4a-single-only | sh4a-nofpu | sh4al | \
2211                 sh2a | sh2a-single | sh2a-single-only | sh2a-nofpu | \
2212                 sh5-64media | sh5-64media-nofpu | \
2213                 sh5-32media | sh5-32media-nofpu | \
2214                 sh5-compact | sh5-compact-nofpu)
2215                         tmake_file="${tmake_file} sh/t-mlib-${sh_multilib}"
2216                         tm_defines="$tm_defines SUPPORT_`echo $sh_multilib|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
2217                         ;;
2218                 *)
2219                         echo "with_multilib_list=${sh_multilib} not supported."
2220                         exit 1
2221                         ;;
2222                 esac
2223         done
2224         if test x${enable_incomplete_targets} = xyes ; then
2225                 tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1"
2226         fi
2227         use_fixproto=yes
2228         ;;
2229 sh-*-rtemscoff*)
2230         tmake_file="sh/t-sh t-rtems sh/t-rtems"
2231         tm_file="${tm_file} dbxcoff.h sh/coff.h sh/rtems.h rtems.h"
2232         ;;
2233 sh-*-rtems*)
2234         tmake_file="sh/t-sh sh/t-elf t-rtems sh/t-rtems"
2235         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h"
2236         ;;
2237 sh-wrs-vxworks)
2238         tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks"
2239         tm_file="${tm_file} elfos.h svr4.h sh/elf.h sh/embed-elf.h vx-common.h vxworks.h sh/vxworks.h"
2240         ;;
2241 sh-*-*)
2242         tm_file="${tm_file} dbxcoff.h sh/coff.h"
2243         use_fixproto=yes
2244         ;;
2245 sparc-*-netbsdelf*)
2246         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2247         extra_options="${extra_options} sparc/long-double-switch.opt"
2248         ;;
2249 sparc64-*-openbsd*)
2250         tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h"
2251         extra_options="${extra_options} sparc/little-endian.opt"
2252         gas=yes gnu_ld=yes
2253         with_cpu=ultrasparc
2254         ;;
2255 sparc-*-elf*)
2256         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h"
2257         tmake_file="sparc/t-elf sparc/t-crtfm"
2258         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2259         use_fixproto=yes
2260         ;;
2261 sparc-*-linux*)         # SPARC's running GNU/Linux, libc6
2262         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h"
2263         extra_options="${extra_options} sparc/long-double-switch.opt"
2264         tmake_file="${tmake_file} sparc/t-linux sparc/t-crtfm"
2265         ;;
2266 sparc-*-rtems*)
2267         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h"
2268         tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
2269         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2270         ;;
2271 sparc64-*-solaris2* | sparcv9-*-solaris2*)
2272         tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
2273         case ${target} in
2274         *-*-solaris2.1[0-9]*)
2275                 tm_file="${tm_file} sol2-10.h"
2276                 ;;
2277         esac
2278         tm_file="${tm_file} sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h"
2279         if test x$gnu_ld = xyes; then
2280                 tm_file="${tm_file} sparc/sol2-gld.h sparc/sol2-gld-bi.h"
2281         fi
2282         if test x$gas = xyes; then
2283                 tm_file="${tm_file} sparc/sol2-gas.h sparc/sol2-gas-bi.h"
2284         fi
2285         tm_file="${tm_file} tm-dwarf2.h"
2286         tmake_file="t-sol2 sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm"
2287         if test x$gnu_ld = xyes; then
2288                 tmake_file="$tmake_file t-slibgcc-elf-ver"
2289         else
2290                 tmake_file="$tmake_file t-slibgcc-sld"
2291         fi
2292         c_target_objs="sol2-c.o"
2293         cxx_target_objs="sol2-c.o"
2294         extra_objs="sol2.o"
2295         tm_p_file="${tm_p_file} sol2-protos.h"
2296         extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o"
2297         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2298           "":yes:* | yes:yes:* ) thread_file=posix ;;
2299           "":*:yes | yes:*:yes ) thread_file=solaris ;;
2300         esac
2301         need_64bit_hwint=yes
2302         ;;
2303 sparc-*-solaris2*)
2304         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
2305         case ${target} in
2306         *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2307                 tm_file="${tm_file} sol2-6.h"
2308                 ;;
2309         *-*-solaris2.1[0-9]*)
2310                 tm_file="${tm_file} sol2-10.h"
2311                 ;;
2312         esac
2313         tm_file="${tm_file} sparc/sol2.h"
2314         if test x$gnu_ld = xyes; then
2315                 tm_file="${tm_file} sparc/sol2-gld.h"
2316         fi
2317         if test x$gas = xyes; then
2318                 tm_file="${tm_file} sparc/sol2-gas.h"
2319         fi
2320         tmake_file="t-sol2 sparc/t-sol2 sparc/t-crtfm"
2321         if test x$gnu_ld = xyes; then
2322                 tmake_file="$tmake_file t-slibgcc-elf-ver"
2323         else
2324                 tmake_file="$tmake_file t-slibgcc-sld"
2325         fi
2326         case ${target} in
2327         *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2328                 if test x$gnu_ld = xno; then
2329                         tm_file="${tm_file} sparc/sol26-sld.h"
2330                 fi
2331                 ;;
2332         *-*-solaris2.[789] | *-*-solaris2.1[0-9]*)
2333                 tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h"
2334                 if test x$gnu_ld = xyes; then
2335                         tm_file="${tm_file} sparc/sol2-gld-bi.h"
2336                 fi
2337                 if test x$gas = xyes; then
2338                         tm_file="${tm_file} sparc/sol2-gas-bi.h"
2339                 fi
2340                 tm_file="${tm_file} tm-dwarf2.h"
2341                 tmake_file="$tmake_file sparc/t-sol2-64"
2342                 need_64bit_hwint=yes
2343                 test x$with_cpu != x || with_cpu=v9
2344                 ;;
2345         esac
2346         c_target_objs="sol2-c.o"
2347         cxx_target_objs="sol2-c.o"
2348         extra_objs="sol2.o"
2349         tm_p_file="${tm_p_file} sol2-protos.h"
2350         extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
2351         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2352           "":yes:* | yes:yes:* )
2353                 case ${target} in
2354                   *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2355                         thread_file=posix95
2356                         ;;
2357                   *)
2358                         thread_file=posix
2359                         ;;
2360                 esac
2361                 ;;
2362           "":*:yes | yes:*:yes )
2363                 thread_file=solaris
2364                 ;;
2365         esac
2366         ;;
2367 sparc-*-sysv4*)
2368         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sysv4-only.h"
2369         tmake_file=t-svr4
2370         extra_parts="crtbegin.o crtend.o"
2371         use_fixproto=yes
2372         ;;
2373 sparc64-*-elf*)
2374         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h"
2375         extra_options="${extra_options} sparc/little-endian.opt"
2376         tmake_file="${tmake_file} sparc/t-crtfm"
2377         extra_parts="crtbegin.o crtend.o"
2378         use_fixproto=yes
2379         ;;
2380 sparc64-*-freebsd*|ultrasparc-*-freebsd*)
2381         tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
2382         extra_options="${extra_options} sparc/long-double-switch.opt"
2383         tmake_file="${tmake_file} sparc/t-crtfm"
2384         case "x$with_cpu" in
2385                 xultrasparc) ;;
2386                 x) with_cpu=ultrasparc ;;
2387                 *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
2388         esac
2389         need_64bit_hwint=yes
2390         ;;
2391 sparc64-*-linux*)               # 64-bit SPARC's running GNU/Linux
2392         tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux64.h"
2393         extra_options="${extra_options} sparc/long-double-switch.opt"
2394         tmake_file="${tmake_file} sparc/t-linux sparc/t-linux64 sparc/t-crtfm"
2395         ;;
2396 sparc64-*-netbsd*)
2397         tm_file="sparc/biarch64.h ${tm_file}"
2398         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2399         extra_options="${extra_options} sparc/long-double-switch.opt"
2400         tmake_file="${tmake_file} sparc/t-netbsd64"
2401         ;;
2402 spu-*-elf*)
2403         tm_file="dbxelf.h elfos.h spu/spu-elf.h spu/spu.h"
2404         tmake_file="spu/t-spu-elf"
2405         extra_headers="spu_intrinsics.h spu_internals.h vmx2spu.h spu_mfcio.h vec_types.h"
2406         extra_modes=spu/spu-modes.def
2407         c_target_objs="${c_target_objs} spu-c.o"
2408         cxx_target_objs="${cxx_target_objs} spu-c.o"
2409         ;;
2410 strongarm-*-elf*)
2411         tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
2412         tmake_file="arm/t-arm arm/t-strongarm-elf"
2413         out_file=arm/arm.c
2414         md_file=arm/arm.md
2415         extra_modes=arm/arm-modes.def
2416         use_fixproto=yes
2417         ;;
2418 strongarm-*-pe)
2419         tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/strongarm-coff.h arm/arm.h arm/pe.h arm/strongarm-pe.h"
2420         tmake_file="arm/t-arm arm/t-strongarm-pe"
2421         out_file=arm/arm.c
2422         md_file=arm/arm.md
2423         extra_modes=arm/arm-modes.def
2424         extra_options="${extra_options} arm/pe.opt"
2425         extra_objs=pe.o
2426         use_fixproto=yes
2427         ;;
2428 strongarm-*-kaos*)
2429         tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-strongarm.h"
2430         tmake_file="arm/t-arm arm/t-strongarm-elf"
2431         out_file=arm/arm.c
2432         md_file=arm/arm.md
2433         extra_modes=arm/arm-modes.def
2434         ;;
2435 v850e1-*-*)
2436         target_cpu_default="TARGET_CPU_v850e1"
2437         tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
2438         tm_p_file=v850/v850-protos.h
2439         tmake_file=v850/t-v850e
2440         md_file=v850/v850.md
2441         out_file=v850/v850.c
2442         extra_options="${extra_options} v850/v850.opt"
2443         if test x$stabs = xyes
2444         then
2445                 tm_file="${tm_file} dbx.h"
2446         fi
2447         use_collect2=no
2448         c_target_objs="v850-c.o"
2449         cxx_target_objs="v850-c.o"
2450         use_fixproto=yes
2451         ;;
2452 v850e-*-*)
2453         target_cpu_default="TARGET_CPU_v850e"
2454         tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
2455         tm_p_file=v850/v850-protos.h
2456         tmake_file=v850/t-v850e
2457         md_file=v850/v850.md
2458         out_file=v850/v850.c
2459         extra_options="${extra_options} v850/v850.opt"
2460         if test x$stabs = xyes
2461         then
2462                 tm_file="${tm_file} dbx.h"
2463         fi
2464         use_collect2=no
2465         c_target_objs="v850-c.o"
2466         cxx_target_objs="v850-c.o"
2467         use_fixproto=yes
2468         ;;
2469 v850-*-*)
2470         target_cpu_default="TARGET_CPU_generic"
2471         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
2472         tmake_file=v850/t-v850
2473         if test x$stabs = xyes
2474         then
2475                 tm_file="${tm_file} dbx.h"
2476         fi
2477         use_collect2=no
2478         c_target_objs="v850-c.o"
2479         cxx_target_objs="v850-c.o"
2480         use_fixproto=yes
2481         ;;
2482 vax-*-bsd*)                     # VAXen running BSD
2483         tm_file="${tm_file} vax/bsd.h"
2484         tmake_file=vax/t-memfuncs
2485         use_collect2=yes
2486         use_fixproto=yes
2487         ;;
2488 vax-*-sysv*)                    # VAXen running system V
2489         tm_file="${tm_file} vax/vaxv.h"
2490         tmake_file=vax/t-memfuncs
2491         use_fixproto=yes
2492         ;;
2493 vax-*-netbsdelf*)
2494         tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
2495         ;;
2496 vax-*-netbsd*)
2497         tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h"
2498         tmake_file=t-netbsd
2499         extra_parts=""
2500         use_collect2=yes
2501         ;;
2502 vax-*-openbsd*)
2503         tm_file="vax/vax.h vax/openbsd1.h openbsd.h vax/openbsd.h"
2504         use_collect2=yes
2505         ;;
2506 vax-*-ultrix*)                  # VAXen running ultrix
2507         tm_file="${tm_file} vax/ultrix.h"
2508         tmake_file=vax/t-memfuncs
2509         use_fixproto=yes
2510         ;;
2511 xscale-*-elf)
2512         tm_file="arm/xscale-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
2513         tmake_file="arm/t-arm arm/t-xscale-elf"
2514         out_file=arm/arm.c
2515         md_file=arm/arm.md
2516         extra_modes=arm/arm-modes.def
2517         use_fixproto=yes
2518         ;;
2519 xscale-*-coff)
2520         tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/xscale-coff.h arm/arm.h"
2521         tmake_file="arm/t-arm arm/t-xscale-coff"
2522         out_file=arm/arm.c
2523         md_file=arm/arm.md
2524         extra_modes=arm/arm-modes.def
2525         use_fixproto=yes
2526         ;;
2527 xstormy16-*-elf)
2528         # For historical reasons, the target files omit the 'x'.
2529         tm_file="dbxelf.h elfos.h svr4.h stormy16/stormy16.h"
2530         tm_p_file=stormy16/stormy16-protos.h
2531         md_file=stormy16/stormy16.md
2532         out_file=stormy16/stormy16.c
2533         extra_options=stormy16/stormy16.opt
2534         tmake_file="stormy16/t-stormy16"
2535         extra_parts="crtbegin.o crtend.o"
2536         use_fixproto=yes
2537         ;;
2538 xtensa-*-elf*)
2539         tm_file="${tm_file} dbxelf.h elfos.h svr4.h xtensa/elf.h"
2540         tmake_file="xtensa/t-xtensa xtensa/t-elf"
2541         ;;
2542 xtensa-*-linux*)
2543         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h xtensa/linux.h"
2544         tmake_file="${tmake_file} xtensa/t-xtensa xtensa/t-linux"
2545         ;;
2546 am33_2.0-*-linux*)
2547         tm_file="mn10300/mn10300.h dbxelf.h elfos.h linux.h mn10300/linux.h"
2548         tmake_file="${tmake_file} mn10300/t-linux"
2549         gas=yes gnu_ld=yes
2550         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
2551         use_collect2=no
2552         ;;
2553 m32c-*-elf*)
2554         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
2555         c_target_objs="m32c-pragma.o"
2556         cxx_target_objs="m32c-pragma.o"
2557         use_fixproto=yes
2558         ;;
2559 *)
2560         echo "*** Configuration ${target} not supported" 1>&2
2561         exit 1
2562         ;;
2563 esac
2564
2565 case ${target} in
2566 i[34567]86-*-linux*aout* | i[34567]86-*-linux*libc1)
2567         tmake_file="${tmake_file} i386/t-gmm_malloc"
2568         ;;
2569 i[34567]86-*-linux* | x86_64-*-linux*)
2570         tmake_file="${tmake_file} i386/t-pmm_malloc"
2571         ;;
2572 i[34567]86-*-* | x86_64-*-*)
2573         tmake_file="${tmake_file} i386/t-gmm_malloc"
2574         ;;
2575 esac
2576
2577 # Support for --with-cpu and related options (and a few unrelated options,
2578 # too).
2579 case ${with_cpu} in
2580   yes | no)
2581     echo "--with-cpu must be passed a value" 1>&2
2582     exit 1
2583     ;;
2584 esac
2585
2586 # If there is no $with_cpu option, try to infer one from ${target}.
2587 # This block sets nothing except for with_cpu.
2588 if test x$with_cpu = x ; then
2589   case ${target} in
2590     ep9312-*-*)
2591       # A Cirrus ARM variant.
2592       with_cpu="ep9312"
2593       ;;
2594     i386-*-*)
2595       with_cpu=i386
2596       ;;
2597     i486-*-*)
2598       with_cpu=i486
2599       ;;
2600     i586-*-*)
2601       case ${target_noncanonical} in
2602         k6_2-*)
2603           with_cpu=k6-2
2604           ;;
2605         k6_3-*)
2606           with_cpu=k6-3
2607           ;;
2608         k6-*)
2609           with_cpu=k6
2610           ;;
2611         pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
2612           with_cpu=pentium-mmx
2613           ;;
2614         *)
2615           with_cpu=pentium
2616           ;;
2617       esac
2618       ;;
2619     i686-*-* | i786-*-*)
2620       case ${target_noncanonical} in
2621         amdfam10-*|barcelona-*)
2622           with_cpu=amdfam10
2623           ;;
2624         k8-*|opteron-*|athlon_64-*)
2625           with_cpu=k8
2626           ;;
2627         athlon_xp-*|athlon_mp-*|athlon_4-*)
2628           with_cpu=athlon-4
2629           ;;
2630         athlon_tbird-*|athlon-*)
2631           with_cpu=athlon
2632           ;;
2633         geode-*)
2634           with_cpu=geode
2635           ;;
2636         pentium2-*)
2637           with_cpu=pentium2
2638           ;;
2639         pentium3-*|pentium3m-*)
2640           with_cpu=pentium3
2641           ;;
2642         pentium4-*|pentium4m-*)
2643           with_cpu=pentium4
2644           ;;
2645         prescott-*)
2646           with_cpu=prescott
2647           ;;
2648         nocona-*)
2649           with_cpu=nocona
2650           ;;
2651         core2-*)
2652           with_cpu=core2
2653           ;;
2654         pentium_m-*)
2655           with_cpu=pentium-m
2656           ;;
2657         pentiumpro-*)
2658           with_cpu=pentiumpro
2659           ;;
2660         *)
2661           with_cpu=generic
2662           ;;
2663       esac
2664       ;;
2665     x86_64-*-*)
2666       case ${target_noncanonical} in
2667         amdfam10-*|barcelona-*)
2668           with_cpu=amdfam10
2669           ;;
2670         k8-*|opteron-*|athlon_64-*)
2671           with_cpu=k8
2672           ;;
2673         nocona-*)
2674           with_cpu=nocona
2675           ;;
2676         core2-*)
2677           with_cpu=core2
2678           ;;
2679         *)
2680           with_cpu=generic
2681           ;;
2682       esac
2683       ;;
2684     alphaev6[78]*-*-*)
2685       with_cpu=ev67
2686       ;;
2687     alphaev6*-*-*)
2688       with_cpu=ev6
2689       ;;
2690     alphapca56*-*-*)
2691       with_cpu=pca56
2692       ;;
2693     alphaev56*-*-*)
2694       with_cpu=ev56
2695       ;;
2696     alphaev5*-*-*)
2697       with_cpu=ev5
2698       ;;
2699     frv-*-*linux* | frv400-*-*linux*)
2700       with_cpu=fr400
2701       ;;
2702     frv550-*-*linux*)
2703       with_cpu=fr550
2704       ;;
2705     m680[012]0-*-*)
2706       with_cpu=`echo ${target} | sed 's/-.*$//'`
2707       ;;
2708     m68k*-*-*)
2709       case "$with_arch" in
2710         "cf")
2711           with_cpu=${default_cf_cpu}
2712           ;;
2713         "" | "m68k")
2714           with_cpu=m${default_m68k_cpu}
2715           ;;
2716       esac
2717       ;;
2718     mips*-*-vxworks)
2719       with_arch=mips2
2720       ;;
2721     sparc*-*-*)
2722       with_cpu="`echo ${target} | sed 's/-.*$//'`"
2723       ;;
2724   esac
2725 fi
2726
2727 # Similarly for --with-float
2728 if test x$with_float = x; then
2729         case ${target} in
2730         ep9312-*-*)
2731                 with_float=hard
2732                 ;;
2733         esac
2734 fi
2735
2736 # Similarly for --with-schedule.
2737 if test x$with_schedule = x; then
2738         case ${target} in
2739         hppa1* | parisc1*)
2740                 # Override default PA8000 scheduling model.
2741                 with_schedule=7100LC
2742                 ;;
2743         esac
2744 fi
2745
2746 # Validate and mark as valid any --with options supported
2747 # by this target.  In order to use a particular --with option
2748 # you must list it in supported_defaults; validating the value
2749 # is optional.  This case statement should set nothing besides
2750 # supported_defaults.
2751
2752 supported_defaults=
2753 case "${target}" in
2754         alpha*-*-*)
2755                 supported_defaults="cpu tune"
2756                 for which in cpu tune; do
2757                         eval "val=\$with_$which"
2758                         case "$val" in
2759                         "" \
2760                         | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \
2761                         | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \
2762                         | 21264a)
2763                                 ;;
2764                         *)
2765                                 echo "Unknown CPU used in --with-$which=$val" 1>&2
2766                                 exit 1
2767                                 ;;
2768                         esac
2769                 done
2770                 ;;
2771
2772         arm*-*-*)
2773                 supported_defaults="arch cpu float tune fpu abi mode"
2774                 for which in cpu tune; do
2775                         # See if it matches any of the entries in arm-cores.def
2776                         eval "val=\$with_$which"
2777                         if [ x"$val" = x ] \
2778                             || grep "^ARM_CORE(\"$val\"," \
2779                                     ${srcdir}/config/arm/arm-cores.def \
2780                                     > /dev/null; then
2781                           # Ok
2782                           new_val=`grep "^ARM_CORE(\"$val\"," \
2783                                 ${srcdir}/config/arm/arm-cores.def | \
2784                                 sed -e 's/^[^,]*,[      ]*//' | \
2785                                 sed -e 's/,.*$//'`
2786                           eval "target_${which}_cname=$new_val"
2787                         echo "For $val real value is $new_val"
2788                           true
2789                         else
2790                           echo "Unknown CPU used in --with-$which=$val" 1>&2
2791                           exit 1
2792                         fi
2793                 done
2794
2795                 case "$with_arch" in
2796                 "" \
2797                 | armv[23456] | armv2a | armv3m | armv4t | armv5t \
2798                 | armv5te | armv6j |armv6k | armv6z | armv6zk \
2799                 | iwmmxt | ep9312)
2800                         # OK
2801                         ;;
2802                 *)
2803                         echo "Unknown arch used in --with-arch=$with_arch" 1>&2
2804                         exit 1
2805                         ;;
2806                 esac
2807
2808                 case "$with_float" in
2809                 "" \
2810                 | soft | hard | softfp)
2811                         # OK
2812                         ;;
2813                 *)
2814                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2815                         exit 1
2816                         ;;
2817                 esac
2818
2819                 case "$with_fpu" in
2820                 "" \
2821                 | fpa | fpe2 | fpe3 | maverick | vfp )
2822                         # OK
2823                         ;;
2824                 *)
2825                         echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1
2826                         exit 1
2827                         ;;
2828                 esac
2829
2830                 case "$with_abi" in
2831                 "" \
2832                 | apcs-gnu | atpcs | aapcs | iwmmxt )
2833                         #OK
2834                         ;;
2835                 *)
2836                         echo "Unknown ABI used in --with-abi=$with_abi"
2837                         exit 1
2838                         ;;
2839                 esac
2840
2841                 case "$with_mode" in
2842                 "" \
2843                 | arm | thumb )
2844                         #OK
2845                         ;;
2846                 *)
2847                         echo "Unknown mode used in --with-mode=$with_mode"
2848                         exit 1
2849                         ;;
2850                 esac
2851
2852                 if test "x$with_arch" != x && test "x$with_cpu" != x; then
2853                         echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2
2854                 fi
2855                 ;;
2856
2857         fr*-*-*linux*)
2858                 supported_defaults=cpu
2859                 case "$with_cpu" in
2860                 fr400) ;;
2861                 fr550) ;;
2862                 *)
2863                         echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
2864                         exit 1
2865                         ;;
2866                 esac
2867                 ;;
2868
2869         fido-*-* | m680[012]0-*-* | m68k*-*-*)
2870                 supported_defaults="arch cpu"
2871                 case "$with_arch" in
2872                 "" | "m68k"| "cf")
2873                         m68k_arch_family="$with_arch"
2874                         ;;
2875                 *)
2876                         echo "Invalid --with-arch=$with_arch" 1>&2
2877                         exit 1
2878                         ;;
2879                 esac
2880
2881                 # We always have a $with_cpu setting here.
2882                 case "$with_cpu" in
2883                 "m68000" | "m68010" | "m68020" | "m68030" | "m68040" | "m68060")
2884                         m68k_cpu_ident=$with_cpu
2885                         ;;
2886                 "m68020-40")
2887                         m68k_cpu_ident=m68020
2888                         tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_40"
2889                         ;;
2890                 "m68020-60")
2891                         m68k_cpu_ident=m68020
2892                         tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_60"
2893                         ;;
2894                 *)
2895                         # We need the C identifier rather than the string.
2896                         m68k_cpu_ident=`awk -v arg="\"$with_cpu\"" \
2897                            'BEGIN { FS="[ \t]*[,()][ \t]*" }; \
2898                             $1 == "M68K_DEVICE" && $2 == arg { print $3 }' \
2899                                  ${srcdir}/config/m68k/m68k-devices.def`
2900                         if [ x"$m68k_cpu_ident" = x ] ; then
2901                                 echo "Unknown CPU used in --with-cpu=$with_cpu" 1>&2
2902                                 exit 1
2903                         fi
2904                         with_cpu="mcpu=$with_cpu"
2905                         ;;
2906                 esac
2907                 ;;
2908
2909         hppa*-*-* | parisc*-*-*)
2910                 supported_defaults="arch schedule"
2911
2912                 case "$with_arch" in
2913                 "" | 1.0 | 1.1 | 2.0)
2914                         # OK
2915                         ;;
2916                 *)
2917                         echo "Unknown architecture used in --with-arch=$with_arch" 1>&2
2918                         exit 1
2919                         ;;
2920                 esac
2921
2922                 case "$with_schedule" in
2923                 "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000)
2924                         # OK
2925                         ;;
2926                 *)
2927                         echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2
2928                         exit 1
2929                         ;;
2930                 esac
2931                 ;;
2932
2933         i[34567]86-*-* | x86_64-*-*)
2934                 supported_defaults="arch cpu tune"
2935                 for which in arch cpu tune; do
2936                         eval "val=\$with_$which"
2937                         case ${val} in
2938                         i386 | i486 \
2939                         | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \
2940                         | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
2941                         | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
2942                         | athlon-4 | athlon-xp | athlon-mp | geode \
2943                         | prescott | pentium-m | pentium4m | pentium3m)
2944                                 case "${target}" in
2945                                   x86_64-*-*)
2946                                       echo "CPU given in --with-$which=$val doesn't support 64bit mode." 1>&2
2947                                       exit 1
2948                                       ;;
2949                                 esac
2950                                 # OK
2951                                 ;;
2952                         "" | amdfam10 | barcelona | k8 | opteron | athlon64 | athlon-fx | nocona | core2 | generic)
2953                                 # OK
2954                                 ;;
2955                         *)
2956                                 echo "Unknown CPU given in --with-$which=$val." 1>&2
2957                                 exit 1
2958                                 ;;
2959                         esac
2960                 done
2961                 ;;
2962
2963         mips*-*-*)
2964                 supported_defaults="abi arch float tune divide"
2965
2966                 case ${with_float} in
2967                 "" | soft | hard)
2968                         # OK
2969                         ;;
2970                 *)
2971                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2972                         exit 1
2973                         ;;
2974                 esac
2975
2976                 case ${with_abi} in
2977                 "" | 32 | o64 | n32 | 64 | eabi)
2978                         # OK
2979                         ;;
2980                 *)
2981                         echo "Unknown ABI used in --with-abi=$with_abi" 1>&2
2982                         exit 1
2983                         ;;
2984                 esac
2985
2986                 case ${with_divide} in
2987                 "" | breaks | traps)
2988                         # OK
2989                         ;;
2990                 *)
2991                         echo "Unknown division check type use in --with-divide=$with_divide" 1>&2
2992                         exit 1
2993                 esac
2994                 ;;
2995
2996         mt-*-*)
2997                 supported_defaults="arch"
2998
2999                 case "$with_arch" in
3000                 "" \
3001                 | ms1-64-001 \
3002                 | ms1-16-002 \
3003                 | ms1-16-003 \
3004                 | ms2 \
3005                 | "")
3006                         # OK
3007                         ;;
3008                 *)
3009                         echo "Unknown arch used in --with-arch=$with_arch" 1>&2
3010                         exit 1
3011                         ;;
3012                 esac
3013                 ;;
3014
3015         powerpc*-*-* | rs6000-*-*)
3016                 supported_defaults="cpu float tune"
3017
3018                 for which in cpu tune; do
3019                         eval "val=\$with_$which"
3020                         case ${val} in
3021                         default32 | default64)
3022                                 with_which="with_$which"
3023                                 eval $with_which=
3024                                 ;;
3025                         405cr)
3026                                 tm_defines="${tm_defines} CONFIG_PPC405CR"
3027                                 eval "with_$which=405"
3028                                 ;;
3029                         "" | common \
3030                         | power | power[23456] | power6x | powerpc | powerpc64 \
3031                         | rios | rios1 | rios2 | rsc | rsc1 | rs64a \
3032                         | 401 | 403 | 405 | 405fp | 440 | 440fp | 505 \
3033                         | 601 | 602 | 603 | 603e | ec603e | 604 \
3034                         | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
3035                         | 854[08] | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5)
3036                                 # OK
3037                                 ;;
3038                         *)
3039                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
3040                                 exit 1
3041                                 ;;
3042                         esac
3043                 done
3044                 ;;
3045
3046         s390*-*-*)
3047                 supported_defaults="arch mode tune"
3048
3049                 for which in arch tune; do
3050                         eval "val=\$with_$which"
3051                         case ${val} in
3052                         "" | g5 | g6 | z900 | z990 | z9-109 | z9-ec)
3053                                 # OK
3054                                 ;;
3055                         *)
3056                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
3057                                 exit 1
3058                                 ;;
3059                         esac
3060                 done
3061
3062                 case ${with_mode} in
3063                 "" | esa | zarch)
3064                         # OK
3065                         ;;
3066                 *)
3067                         echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2
3068                         exit 1
3069                         ;;
3070                 esac
3071                 ;;
3072
3073         sh[123456ble]-*-* | sh-*-*)
3074                 supported_defaults="cpu"
3075                 case "`echo $with_cpu | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz- | sed s/sh/m/`" in
3076                 "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu )
3077                         # OK
3078                         ;;
3079                 m2a | m2a-single | m2a-single-only | m2a-nofpu)
3080                         ;;
3081                 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al)
3082                         ;;
3083                 *)
3084                         echo "Unknown CPU used in --with-cpu=$with_cpu, known values:"  1>&2
3085                         echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2
3086                         echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2
3087                         echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2
3088                         exit 1
3089                         ;;
3090                 esac
3091                 ;;
3092         sparc*-*-*)
3093                 supported_defaults="cpu float tune"
3094
3095                 for which in cpu tune; do
3096                         eval "val=\$with_$which"
3097                         case ${val} in
3098                         "" | sparc | sparcv9 | sparc64 | sparc86x \
3099                         | v7 | cypress | v8 | supersparc | sparclite | f930 \
3100                         | f934 | hypersparc | sparclite86x | sparclet | tsc701 \
3101                         | v9 | ultrasparc | ultrasparc3 | niagara)
3102                                 # OK
3103                                 ;;
3104                         *)
3105                                 echo "Unknown cpu used in --with-$which=$val" 1>&2
3106                                 exit 1
3107                                 ;;
3108                         esac
3109                 done
3110
3111                 case ${with_float} in
3112                 "" | soft | hard)
3113                         # OK
3114                         ;;
3115                 *)
3116                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
3117                         exit 1
3118                         ;;
3119                 esac
3120                 ;;
3121
3122         v850*-*-*)
3123                 supported_defaults=cpu
3124                 case ${with_cpu} in
3125                 "" | v850e | v850e1)
3126                         # OK
3127                         ;;
3128                 *)
3129                         echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
3130                         exit 1
3131                         ;;
3132                 esac
3133                 ;;
3134 esac
3135
3136 # Set some miscellaneous flags for particular targets.
3137 target_cpu_default2=
3138 case ${target} in
3139         alpha*-*-*)
3140                 if test x$gas = xyes
3141                 then
3142                         target_cpu_default2="MASK_GAS"
3143                 fi
3144                 ;;
3145
3146         arm*-*-*)
3147                 if test x$target_cpu_cname = x
3148                 then
3149                         target_cpu_default2=TARGET_CPU_generic
3150                 else
3151                         target_cpu_default2=TARGET_CPU_$target_cpu_cname
3152                 fi
3153                 ;;
3154
3155         hppa*-*-* | parisc*-*-*)
3156                 target_cpu_default2="MASK_BIG_SWITCH"
3157                 if test x$gas = xyes
3158                 then
3159                         target_cpu_default2="${target_cpu_default2}|MASK_GAS|MASK_JUMP_IN_DELAY"
3160                 fi
3161                 ;;
3162
3163         fido*-*-* | m680[012]0-*-* | m68k*-*-*)
3164                 target_cpu_default2=$m68k_cpu_ident
3165                 if [ x"$m68k_arch_family" != x ]; then
3166                         tmake_file="m68k/t-$m68k_arch_family $tmake_file"
3167                 fi
3168                 ;;
3169
3170         mips*-*-*)
3171                 if test x$gnu_ld = xyes
3172                 then
3173                         target_cpu_default2="MASK_SPLIT_ADDRESSES"
3174                 fi
3175                 case ${target} in
3176                         mips*el-*-*)
3177                                 tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
3178                                 ;;
3179                 esac
3180                 if test "x$enable_gofast" = xyes
3181                 then
3182                         tm_defines="US_SOFTWARE_GOFAST $tm_defines"
3183                         tmake_file="mips/t-gofast $tmake_file"
3184                 else
3185                         tmake_file="mips/t-mips $tmake_file"
3186                 fi
3187                 ;;
3188
3189         powerpc*-*-* | rs6000-*-*)
3190                 # FIXME: The PowerPC port uses the value set at compile time,
3191                 # although it's only cosmetic.
3192                 if test "x$with_cpu" != x
3193                 then
3194                         target_cpu_default2="\\\"$with_cpu\\\""
3195                 fi
3196                 out_file=rs6000/rs6000.c
3197                 c_target_objs="${c_target_objs} rs6000-c.o"
3198                 cxx_target_objs="${cxx_target_objs} rs6000-c.o"
3199                 tmake_file="rs6000/t-rs6000 ${tmake_file}"
3200
3201                 if test x$enable_e500_double = xyes
3202                 then
3203                         tm_file="$tm_file rs6000/e500-double.h"
3204                 fi
3205                 ;;
3206
3207         sh[123456ble]*-*-* | sh-*-*)
3208                 c_target_objs="${c_target_objs} sh-c.o"
3209                 cxx_target_objs="${cxx_target_objs} sh-c.o"
3210                 ;;
3211
3212         sparc*-*-*)
3213                 # Some standard aliases.
3214                 case x$with_cpu in
3215                 xsparc)
3216                         with_cpu=v7
3217                         ;;
3218                 xsparcv9 | xsparc64)
3219                         with_cpu=v9
3220                         ;;
3221                 esac
3222
3223                 # The SPARC port checks this value at compile-time.
3224                 target_cpu_default2="TARGET_CPU_$with_cpu"
3225                 ;;
3226         v850*-*-*)
3227                 # FIXME: The v850 is "special" in that it does not support
3228                 # runtime CPU selection, only --with-cpu.
3229                 case "x$with_cpu" in
3230                 x)
3231                         ;;
3232                 xv850e)
3233                         target_cpu_default2="TARGET_CPU_$with_cpu"
3234                         ;;
3235                 esac
3236                 ;;
3237 esac
3238
3239 t=
3240 all_defaults="abi cpu arch tune schedule float mode fpu divide"
3241 for option in $all_defaults
3242 do
3243         eval "val=\$with_$option"
3244         if test -n "$val"; then
3245                 case " $supported_defaults " in
3246                 *" $option "*)
3247                         ;;
3248                 *)
3249                         echo "This target does not support --with-$option." 2>&1
3250                         echo "Valid --with options are: $supported_defaults" 2>&1
3251                         exit 1
3252                         ;;
3253                 esac
3254
3255                 if test "x$t" = x
3256                 then
3257                         t="{ \"$option\", \"$val\" }"
3258                 else
3259                         t="${t}, { \"$option\", \"$val\" }"
3260                 fi
3261         fi
3262 done
3263
3264 if test "x$t" = x
3265 then
3266         configure_default_options="{ { NULL, NULL} }"
3267 else
3268         configure_default_options="{ ${t} }"
3269 fi
3270
3271 if test "$target_cpu_default2" != ""
3272 then
3273         if test "$target_cpu_default" != ""
3274         then
3275                 target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
3276         else
3277                 target_cpu_default=$target_cpu_default2
3278         fi
3279 fi