[pf3gnuchains/gcc-fork.git] / gcc / cfgrtl.c

/* Control flow graph manipulation code for GNU compiler.
   Copyright (C) 1987, 1988, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
   1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.

This file is part of GCC.

GCC is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free
Software Foundation; either version 2, or (at your option) any later
version.

GCC is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
for more details.

You should have received a copy of the GNU General Public License
along with GCC; see the file COPYING.  If not, write to the Free
Software Foundation, 59 Temple Place - Suite 330, Boston, MA
02111-1307, USA.  */

/* This file contains low level functions to manipulate the CFG and analyze it
   that are aware of the RTL intermediate language.

   Available functionality:
     - Basic CFG/RTL manipulation API documented in cfghooks.h
     - CFG-aware instruction chain manipulation
         delete_insn, delete_insn_chain
     - Edge splitting and committing to edges
         insert_insn_on_edge, commit_edge_insertions
     - CFG updating after insn simplification
         purge_dead_edges, purge_all_dead_edges

   Functions not supposed for generic use:
     - Infrastructure to determine quickly basic block for insn
         compute_bb_for_insn, update_bb_for_insn, set_block_for_insn,
     - Edge redirection with updating and optimizing of insn chain
         block_label, tidy_fallthru_edge, force_nonfallthru  */
\f
#include "config.h"
#include "system.h"
#include "coretypes.h"
#include "tm.h"
#include "tree.h"
#include "rtl.h"
#include "hard-reg-set.h"
#include "basic-block.h"
#include "regs.h"
#include "flags.h"
#include "output.h"
#include "function.h"
#include "except.h"
#include "toplev.h"
#include "tm_p.h"
#include "obstack.h"
#include "insn-config.h"
#include "cfglayout.h"
#include "expr.h"
#include "target.h"


/* The labels mentioned in non-jump rtl.  Valid during find_basic_blocks.  */
/* ??? Should probably be using LABEL_NUSES instead.  It would take a
   bit of surgery to be able to use or co-opt the routines in jump.  */
rtx label_value_list;

static int can_delete_note_p (rtx);
static int can_delete_label_p (rtx);
static void commit_one_edge_insertion (edge, int);
static rtx last_loop_beg_note (rtx);
static bool back_edge_of_syntactic_loop_p (basic_block, basic_block);
static basic_block rtl_split_edge (edge);
static bool rtl_move_block_after (basic_block, basic_block);
static int rtl_verify_flow_info (void);
static basic_block cfg_layout_split_block (basic_block, void *);
static edge cfg_layout_redirect_edge_and_branch (edge, basic_block);
static basic_block cfg_layout_redirect_edge_and_branch_force (edge, basic_block);
static void cfg_layout_delete_block (basic_block);
static void rtl_delete_block (basic_block);
static basic_block rtl_redirect_edge_and_branch_force (edge, basic_block);
static edge rtl_redirect_edge_and_branch (edge, basic_block);
static basic_block rtl_split_block (basic_block, void *);
static void rtl_dump_bb (basic_block, FILE *, int);
static int rtl_verify_flow_info_1 (void);
static void mark_killed_regs (rtx, rtx, void *);
static void rtl_make_forwarder_block (edge);
\f
/* Return true if NOTE is not one of the ones that must be kept paired,
   so that we may simply delete it.  */

static int
can_delete_note_p (rtx note)
{
  return (NOTE_LINE_NUMBER (note) == NOTE_INSN_DELETED
          || NOTE_LINE_NUMBER (note) == NOTE_INSN_BASIC_BLOCK
          || NOTE_LINE_NUMBER (note) == NOTE_INSN_UNLIKELY_EXECUTED_CODE);
}

/* True if a given label can be deleted.  */

static int
can_delete_label_p (rtx label)
{
  return (!LABEL_PRESERVE_P (label)
          /* User declared labels must be preserved.  */
          && LABEL_NAME (label) == 0
          && !in_expr_list_p (forced_labels, label)
          && !in_expr_list_p (label_value_list, label));
}

/* Delete INSN by patching it out.  Return the next insn.  */

rtx
delete_insn (rtx insn)
{
  rtx next = NEXT_INSN (insn);
  rtx note;
  bool really_delete = true;

  if (LABEL_P (insn))
    {
      /* Some labels can't be directly removed from the INSN chain, as they
         might be references via variables, constant pool etc.
         Convert them to the special NOTE_INSN_DELETED_LABEL note.  */
      if (! can_delete_label_p (insn))
        {
          const char *name = LABEL_NAME (insn);

          really_delete = false;
          PUT_CODE (insn, NOTE);
          NOTE_LINE_NUMBER (insn) = NOTE_INSN_DELETED_LABEL;
          NOTE_DELETED_LABEL_NAME (insn) = name;
        }

      remove_node_from_expr_list (insn, &nonlocal_goto_handler_labels);
    }

  if (really_delete)
    {
      /* If this insn has already been deleted, something is very wrong.  */
      gcc_assert (!INSN_DELETED_P (insn));
      remove_insn (insn);
      INSN_DELETED_P (insn) = 1;
    }

  /* If deleting a jump, decrement the use count of the label.  Deleting
     the label itself should happen in the normal course of block merging.  */
  if (JUMP_P (insn)
      && JUMP_LABEL (insn)
      && LABEL_P (JUMP_LABEL (insn)))
    LABEL_NUSES (JUMP_LABEL (insn))--;

  /* Also if deleting an insn that references a label.  */
  else
    {
      while ((note = find_reg_note (insn, REG_LABEL, NULL_RTX)) != NULL_RTX
             && LABEL_P (XEXP (note, 0)))
        {
          LABEL_NUSES (XEXP (note, 0))--;
          remove_note (insn, note);
        }
    }

  if (JUMP_P (insn)
      && (GET_CODE (PATTERN (insn)) == ADDR_VEC
          || GET_CODE (PATTERN (insn)) == ADDR_DIFF_VEC))
    {
      rtx pat = PATTERN (insn);
      int diff_vec_p = GET_CODE (PATTERN (insn)) == ADDR_DIFF_VEC;
      int len = XVECLEN (pat, diff_vec_p);
      int i;

      for (i = 0; i < len; i++)
        {
          rtx label = XEXP (XVECEXP (pat, diff_vec_p, i), 0);

          /* When deleting code in bulk (e.g. removing many unreachable
             blocks) we can delete a label that's a target of the vector
             before deleting the vector itself.  */
          if (!NOTE_P (label))
            LABEL_NUSES (label)--;
        }
    }

  return next;
}

/* Like delete_insn but also purge dead edges from BB.  */
rtx
delete_insn_and_edges (rtx insn)
{
  rtx x;
  bool purge = false;

  if (INSN_P (insn)
      && BLOCK_FOR_INSN (insn)
      && BB_END (BLOCK_FOR_INSN (insn)) == insn)
    purge = true;
  x = delete_insn (insn);
  if (purge)
    purge_dead_edges (BLOCK_FOR_INSN (insn));
  return x;
}

/* Unlink a chain of insns between START and FINISH, leaving notes
   that must be paired.  */

void
delete_insn_chain (rtx start, rtx finish)
{
  rtx next;

  /* Unchain the insns one by one.  It would be quicker to delete all of these
     with a single unchaining, rather than one at a time, but we need to keep
     the NOTE's.  */
  while (1)
    {
      next = NEXT_INSN (start);
      if (NOTE_P (start) && !can_delete_note_p (start))
        ;
      else
        next = delete_insn (start);

      if (start == finish)
        break;
      start = next;
    }
}

/* Like delete_insn but also purge dead edges from BB.  */
void
delete_insn_chain_and_edges (rtx first, rtx last)
{
  bool purge = false;

  if (INSN_P (last)
      && BLOCK_FOR_INSN (last)
      && BB_END (BLOCK_FOR_INSN (last)) == last)
    purge = true;
  delete_insn_chain (first, last);
  if (purge)
    purge_dead_edges (BLOCK_FOR_INSN (last));
}
\f
/* Create a new basic block consisting of the instructions between HEAD and END
   inclusive.  This function is designed to allow fast BB construction - reuses
   the note and basic block struct in BB_NOTE, if any and do not grow
   BASIC_BLOCK chain and should be used directly only by CFG construction code.
   END can be NULL in to create new empty basic block before HEAD.  Both END
   and HEAD can be NULL to create basic block at the end of INSN chain.
   AFTER is the basic block we should be put after.  */

basic_block
create_basic_block_structure (rtx head, rtx end, rtx bb_note, basic_block after)
{
  basic_block bb;

  if (bb_note
      && (bb = NOTE_BASIC_BLOCK (bb_note)) != NULL
      && bb->aux == NULL)
    {
      /* If we found an existing note, thread it back onto the chain.  */

      rtx after;

      if (LABEL_P (head))
        after = head;
      else
        {
          after = PREV_INSN (head);
          head = bb_note;
        }

      if (after != bb_note && NEXT_INSN (after) != bb_note)
        reorder_insns_nobb (bb_note, bb_note, after);
    }
  else
    {
      /* Otherwise we must create a note and a basic block structure.  */

      bb = alloc_block ();

      if (!head && !end)
        head = end = bb_note
          = emit_note_after (NOTE_INSN_BASIC_BLOCK, get_last_insn ());
      else if (LABEL_P (head) && end)
        {
          bb_note = emit_note_after (NOTE_INSN_BASIC_BLOCK, head);
          if (head == end)
            end = bb_note;
        }
      else
        {
          bb_note = emit_note_before (NOTE_INSN_BASIC_BLOCK, head);
          head = bb_note;
          if (!end)
            end = head;
        }

      NOTE_BASIC_BLOCK (bb_note) = bb;
    }

  /* Always include the bb note in the block.  */
  if (NEXT_INSN (end) == bb_note)
    end = bb_note;

  BB_HEAD (bb) = head;
  BB_END (bb) = end;
  bb->index = last_basic_block++;
  bb->flags = BB_NEW;
  link_block (bb, after);
  BASIC_BLOCK (bb->index) = bb;
  update_bb_for_insn (bb);
  BB_SET_PARTITION (bb, BB_UNPARTITIONED);

  /* Tag the block so that we know it has been used when considering
     other basic block notes.  */
  bb->aux = bb;

  return bb;
}

/* Create new basic block consisting of instructions in between HEAD and END
   and place it to the BB chain after block AFTER.  END can be NULL in to
   create new empty basic block before HEAD.  Both END and HEAD can be NULL to
   create basic block at the end of INSN chain.  */

static basic_block
rtl_create_basic_block (void *headp, void *endp, basic_block after)
{
  rtx head = headp, end = endp;
  basic_block bb;

  /* Grow the basic block array if needed.  */
  if ((size_t) last_basic_block >= VARRAY_SIZE (basic_block_info))
    {
      size_t new_size = last_basic_block + (last_basic_block + 3) / 4;
      VARRAY_GROW (basic_block_info, new_size);
    }

  n_basic_blocks++;

  bb = create_basic_block_structure (head, end, NULL, after);
  bb->aux = NULL;
  return bb;
}

static basic_block
cfg_layout_create_basic_block (void *head, void *end, basic_block after)
{
  basic_block newbb = rtl_create_basic_block (head, end, after);

  initialize_bb_rbi (newbb);
  return newbb;
}
\f
/* Delete the insns in a (non-live) block.  We physically delete every
   non-deleted-note insn, and update the flow graph appropriately.

   Return nonzero if we deleted an exception handler.  */

/* ??? Preserving all such notes strikes me as wrong.  It would be nice
   to post-process the stream to remove empty blocks, loops, ranges, etc.  */

static void
rtl_delete_block (basic_block b)
{
  rtx insn, end, tmp;

  /* If the head of this block is a CODE_LABEL, then it might be the
     label for an exception handler which can't be reached.

     We need to remove the label from the exception_handler_label list
     and remove the associated NOTE_INSN_EH_REGION_BEG and
     NOTE_INSN_EH_REGION_END notes.  */

  insn = BB_HEAD (b);

  if (LABEL_P (insn))
    maybe_remove_eh_handler (insn);

  /* Include any jump table following the basic block.  */
  end = BB_END (b);
  if (tablejump_p (end, NULL, &tmp))
    end = tmp;

  /* Include any barrier that may follow the basic block.  */
  tmp = next_nonnote_insn (end);
  if (tmp && BARRIER_P (tmp))
    end = tmp;

  /* Selectively delete the entire chain.  */
  BB_HEAD (b) = NULL;
  delete_insn_chain (insn, end);
}
\f
/* Records the basic block struct in BLOCK_FOR_INSN for every insn.  */

void
compute_bb_for_insn (void)
{
  basic_block bb;

  FOR_EACH_BB (bb)
    {
      rtx end = BB_END (bb);
      rtx insn;

      for (insn = BB_HEAD (bb); ; insn = NEXT_INSN (insn))
        {
          BLOCK_FOR_INSN (insn) = bb;
          if (insn == end)
            break;
        }
    }
}

/* Release the basic_block_for_insn array.  */

void
free_bb_for_insn (void)
{
  rtx insn;
  for (insn = get_insns (); insn; insn = NEXT_INSN (insn))
    if (!BARRIER_P (insn))
      BLOCK_FOR_INSN (insn) = NULL;
}

/* Return RTX to emit after when we want to emit code on the entry of function.  */
rtx
entry_of_function (void)
{
  return (n_basic_blocks ? BB_HEAD (ENTRY_BLOCK_PTR->next_bb) : get_insns ());
}

/* Update insns block within BB.  */

void
update_bb_for_insn (basic_block bb)
{
  rtx insn;

  for (insn = BB_HEAD (bb); ; insn = NEXT_INSN (insn))
    {
      if (!BARRIER_P (insn))
        set_block_for_insn (insn, bb);
      if (insn == BB_END (bb))
        break;
    }
}
\f
/* Creates a new basic block just after basic block B by splitting
   everything after specified instruction I.  */

static basic_block
rtl_split_block (basic_block bb, void *insnp)
{
  basic_block new_bb;
  rtx insn = insnp;
  edge e;
  edge_iterator ei;

  if (!insn)
    {
      insn = first_insn_after_basic_block_note (bb);

      if (insn)
        insn = PREV_INSN (insn);
      else
        insn = get_last_insn ();
    }

  /* We probably should check type of the insn so that we do not create
     inconsistent cfg.  It is checked in verify_flow_info anyway, so do not
     bother.  */
  if (insn == BB_END (bb))
    emit_note_after (NOTE_INSN_DELETED, insn);

  /* Create the new basic block.  */
  new_bb = create_basic_block (NEXT_INSN (insn), BB_END (bb), bb);
  BB_COPY_PARTITION (new_bb, bb);
  BB_END (bb) = insn;

  /* Redirect the outgoing edges.  */
  new_bb->succs = bb->succs;
  bb->succs = NULL;
  FOR_EACH_EDGE (e, ei, new_bb->succs)
    e->src = new_bb;

  if (bb->global_live_at_start)
    {
      new_bb->global_live_at_start = OBSTACK_ALLOC_REG_SET (&flow_obstack);
      new_bb->global_live_at_end = OBSTACK_ALLOC_REG_SET (&flow_obstack);
      COPY_REG_SET (new_bb->global_live_at_end, bb->global_live_at_end);

      /* We now have to calculate which registers are live at the end
         of the split basic block and at the start of the new basic
         block.  Start with those registers that are known to be live
         at the end of the original basic block and get
         propagate_block to determine which registers are live.  */
      COPY_REG_SET (new_bb->global_live_at_start, bb->global_live_at_end);
      propagate_block (new_bb, new_bb->global_live_at_start, NULL, NULL, 0);
      COPY_REG_SET (bb->global_live_at_end,
                    new_bb->global_live_at_start);
#ifdef HAVE_conditional_execution
      /* In the presence of conditional execution we are not able to update
         liveness precisely.  */
      if (reload_completed)
        {
          bb->flags |= BB_DIRTY;
          new_bb->flags |= BB_DIRTY;
        }
#endif
    }

  return new_bb;
}

/* Blocks A and B are to be merged into a single block A.  The insns
   are already contiguous.  */

static void
rtl_merge_blocks (basic_block a, basic_block b)
{
  rtx b_head = BB_HEAD (b), b_end = BB_END (b), a_end = BB_END (a);
  rtx del_first = NULL_RTX, del_last = NULL_RTX;
  int b_empty = 0;

  /* If there was a CODE_LABEL beginning B, delete it.  */
  if (LABEL_P (b_head))
    {
      /* Detect basic blocks with nothing but a label.  This can happen
         in particular at the end of a function.  */
      if (b_head == b_end)
        b_empty = 1;

      del_first = del_last = b_head;
      b_head = NEXT_INSN (b_head);
    }

  /* Delete the basic block note and handle blocks containing just that
     note.  */
  if (NOTE_INSN_BASIC_BLOCK_P (b_head))
    {
      if (b_head == b_end)
        b_empty = 1;
      if (! del_last)
        del_first = b_head;

      del_last = b_head;
      b_head = NEXT_INSN (b_head);
    }

  /* If there was a jump out of A, delete it.  */
  if (JUMP_P (a_end))
    {
      rtx prev;

      for (prev = PREV_INSN (a_end); ; prev = PREV_INSN (prev))
        if (!NOTE_P (prev)
            || NOTE_LINE_NUMBER (prev) == NOTE_INSN_BASIC_BLOCK
            || prev == BB_HEAD (a))
          break;

      del_first = a_end;

#ifdef HAVE_cc0
      /* If this was a conditional jump, we need to also delete
         the insn that set cc0.  */
      if (only_sets_cc0_p (prev))
        {
          rtx tmp = prev;

          prev = prev_nonnote_insn (prev);
          if (!prev)
            prev = BB_HEAD (a);
          del_first = tmp;
        }
#endif

      a_end = PREV_INSN (del_first);
    }
  else if (BARRIER_P (NEXT_INSN (a_end)))
    del_first = NEXT_INSN (a_end);

  /* Delete everything marked above as well as crap that might be
     hanging out between the two blocks.  */
  BB_HEAD (b) = NULL;
  delete_insn_chain (del_first, del_last);

  /* Reassociate the insns of B with A.  */
  if (!b_empty)
    {
      rtx x;

      for (x = a_end; x != b_end; x = NEXT_INSN (x))
        set_block_for_insn (x, a);

      set_block_for_insn (b_end, a);

      a_end = b_end;
    }

  BB_END (a) = a_end;
}

/* Return true when block A and B can be merged.  */
static bool
rtl_can_merge_blocks (basic_block a,basic_block b)
{
  /* If we are partitioning hot/cold basic blocks, we don't want to
     mess up unconditional or indirect jumps that cross between hot
     and cold sections.

     Basic block partitioning may result in some jumps that appear to
     be optimizable (or blocks that appear to be mergeable), but which really 
     must be left untouched (they are required to make it safely across 
     partition boundaries).  See  the comments at the top of 
     bb-reorder.c:partition_hot_cold_basic_blocks for complete details.  */

  if (flag_reorder_blocks_and_partition
      && (find_reg_note (BB_END (a), REG_CROSSING_JUMP, NULL_RTX)
          || find_reg_note (BB_END (b), REG_CROSSING_JUMP, NULL_RTX)
          || BB_PARTITION (a) != BB_PARTITION (b)))
    return false;

  /* There must be exactly one edge in between the blocks.  */
  return (EDGE_COUNT (a->succs) == 1
          && EDGE_SUCC (a, 0)->dest == b
          && EDGE_COUNT (b->preds) == 1
          && a != b
          /* Must be simple edge.  */
          && !(EDGE_SUCC (a, 0)->flags & EDGE_COMPLEX)
          && a->next_bb == b
          && a != ENTRY_BLOCK_PTR && b != EXIT_BLOCK_PTR
          /* If the jump insn has side effects,
             we can't kill the edge.  */
          && (!JUMP_P (BB_END (a))
              || (reload_completed
                  ? simplejump_p (BB_END (a)) : onlyjump_p (BB_END (a)))));
}
\f
/* Return the label in the head of basic block BLOCK.  Create one if it doesn't
   exist.  */

rtx
block_label (basic_block block)
{
  if (block == EXIT_BLOCK_PTR)
    return NULL_RTX;

  if (!LABEL_P (BB_HEAD (block)))
    {
      BB_HEAD (block) = emit_label_before (gen_label_rtx (), BB_HEAD (block));
    }

  return BB_HEAD (block);
}

/* Attempt to perform edge redirection by replacing possibly complex jump
   instruction by unconditional jump or removing jump completely.  This can
   apply only if all edges now point to the same block.  The parameters and
   return values are equivalent to redirect_edge_and_branch.  */

edge
try_redirect_by_replacing_jump (edge e, basic_block target, bool in_cfglayout)
{
  basic_block src = e->src;
  rtx insn = BB_END (src), kill_from;
  edge tmp;
  rtx set;
  int fallthru = 0;
  edge_iterator ei;

  /* If we are partitioning hot/cold basic blocks, we don't want to
     mess up unconditional or indirect jumps that cross between hot
     and cold sections.

     Basic block partitioning may result in some jumps that appear to
     be optimizable (or blocks that appear to be mergeable), but which really 
     must be left untouched (they are required to make it safely across 
     partition boundaries).  See  the comments at the top of 
     bb-reorder.c:partition_hot_cold_basic_blocks for complete details.  */
  
  if (flag_reorder_blocks_and_partition
      && (find_reg_note (insn, REG_CROSSING_JUMP, NULL_RTX)
          || BB_PARTITION (src) != BB_PARTITION (target)))
    return NULL;

  /* Verify that all targets will be TARGET.  */
  FOR_EACH_EDGE (tmp, ei, src->succs)
    if (tmp->dest != target && tmp != e)
      break;

  if (tmp || !onlyjump_p (insn))
    return NULL;
  if ((!optimize || reload_completed) && tablejump_p (insn, NULL, NULL))
    return NULL;

  /* Avoid removing branch with side effects.  */
  set = single_set (insn);
  if (!set || side_effects_p (set))
    return NULL;

  /* In case we zap a conditional jump, we'll need to kill
     the cc0 setter too.  */
  kill_from = insn;
#ifdef HAVE_cc0
  if (reg_mentioned_p (cc0_rtx, PATTERN (insn)))
    kill_from = PREV_INSN (insn);
#endif

  /* See if we can create the fallthru edge.  */
  if (in_cfglayout || can_fallthru (src, target))
    {
      if (dump_file)
        fprintf (dump_file, "Removing jump %i.\n", INSN_UID (insn));
      fallthru = 1;

      /* Selectively unlink whole insn chain.  */
      if (in_cfglayout)
        {
          rtx insn = src->rbi->footer;

          delete_insn_chain (kill_from, BB_END (src));

          /* Remove barriers but keep jumptables.  */
          while (insn)
            {
              if (BARRIER_P (insn))
                {
                  if (PREV_INSN (insn))
                    NEXT_INSN (PREV_INSN (insn)) = NEXT_INSN (insn);
                  else
                    src->rbi->footer = NEXT_INSN (insn);
                  if (NEXT_INSN (insn))
                    PREV_INSN (NEXT_INSN (insn)) = PREV_INSN (insn);
                }
              if (LABEL_P (insn))
                break;
              insn = NEXT_INSN (insn);
            }
        }
      else
        delete_insn_chain (kill_from, PREV_INSN (BB_HEAD (target)));
    }

  /* If this already is simplejump, redirect it.  */
  else if (simplejump_p (insn))
    {
      if (e->dest == target)
        return NULL;
      if (dump_file)
        fprintf (dump_file, "Redirecting jump %i from %i to %i.\n",
                 INSN_UID (insn), e->dest->index, target->index);
      if (!redirect_jump (insn, block_label (target), 0))
        {
          gcc_assert (target == EXIT_BLOCK_PTR);
          return NULL;
        }
    }

  /* Cannot do anything for target exit block.  */
  else if (target == EXIT_BLOCK_PTR)
    return NULL;

  /* Or replace possibly complicated jump insn by simple jump insn.  */
  else
    {
      rtx target_label = block_label (target);
      rtx barrier, label, table;

      emit_jump_insn_after_noloc (gen_jump (target_label), insn);
      JUMP_LABEL (BB_END (src)) = target_label;
      LABEL_NUSES (target_label)++;
      if (dump_file)
        fprintf (dump_file, "Replacing insn %i by jump %i\n",
                 INSN_UID (insn), INSN_UID (BB_END (src)));


      delete_insn_chain (kill_from, insn);

      /* Recognize a tablejump that we are converting to a
         simple jump and remove its associated CODE_LABEL
         and ADDR_VEC or ADDR_DIFF_VEC.  */
      if (tablejump_p (insn, &label, &table))
        delete_insn_chain (label, table);

      barrier = next_nonnote_insn (BB_END (src));
      if (!barrier || !BARRIER_P (barrier))
        emit_barrier_after (BB_END (src));
      else
        {
          if (barrier != NEXT_INSN (BB_END (src)))
            {
              /* Move the jump before barrier so that the notes
                 which originally were or were created before jump table are
                 inside the basic block.  */
              rtx new_insn = BB_END (src);
              rtx tmp;

              for (tmp = NEXT_INSN (BB_END (src)); tmp != barrier;
                   tmp = NEXT_INSN (tmp))
                set_block_for_insn (tmp, src);

              NEXT_INSN (PREV_INSN (new_insn)) = NEXT_INSN (new_insn);
              PREV_INSN (NEXT_INSN (new_insn)) = PREV_INSN (new_insn);

              NEXT_INSN (new_insn) = barrier;
              NEXT_INSN (PREV_INSN (barrier)) = new_insn;

              PREV_INSN (new_insn) = PREV_INSN (barrier);
              PREV_INSN (barrier) = new_insn;
            }
        }
    }

  /* Keep only one edge out and set proper flags.  */
  while (EDGE_COUNT (src->succs) > 1)
    remove_edge (e);

  e = EDGE_SUCC (src, 0);
  if (fallthru)
    e->flags = EDGE_FALLTHRU;
  else
    e->flags = 0;

  e->probability = REG_BR_PROB_BASE;
  e->count = src->count;

  /* We don't want a block to end on a line-number note since that has
     the potential of changing the code between -g and not -g.  */
  while (NOTE_P (BB_END (e->src))
         && NOTE_LINE_NUMBER (BB_END (e->src)) >= 0)
    delete_insn (BB_END (e->src));

  if (e->dest != target)
    redirect_edge_succ (e, target);

  return e;
}

/* Return last loop_beg note appearing after INSN, before start of next
   basic block.  Return INSN if there are no such notes.

   When emitting jump to redirect a fallthru edge, it should always appear
   after the LOOP_BEG notes, as loop optimizer expect loop to either start by
   fallthru edge or jump following the LOOP_BEG note jumping to the loop exit
   test.  */

static rtx
last_loop_beg_note (rtx insn)
{
  rtx last = insn;

  for (insn = NEXT_INSN (insn); insn && NOTE_P (insn)
       && NOTE_LINE_NUMBER (insn) != NOTE_INSN_BASIC_BLOCK;
       insn = NEXT_INSN (insn))
    if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_BEG)
      last = insn;

  return last;
}

/* Redirect edge representing branch of (un)conditional jump or tablejump,
   NULL on failure  */
static edge
redirect_branch_edge (edge e, basic_block target)
{
  rtx tmp;
  rtx old_label = BB_HEAD (e->dest);
  basic_block src = e->src;
  rtx insn = BB_END (src);

  /* We can only redirect non-fallthru edges of jump insn.  */
  if (e->flags & EDGE_FALLTHRU)
    return NULL;
  else if (!JUMP_P (insn))
    return NULL;

  /* Recognize a tablejump and adjust all matching cases.  */
  if (tablejump_p (insn, NULL, &tmp))
    {
      rtvec vec;
      int j;
      rtx new_label = block_label (target);

      if (target == EXIT_BLOCK_PTR)
        return NULL;
      if (GET_CODE (PATTERN (tmp)) == ADDR_VEC)
        vec = XVEC (PATTERN (tmp), 0);
      else
        vec = XVEC (PATTERN (tmp), 1);

      for (j = GET_NUM_ELEM (vec) - 1; j >= 0; --j)
        if (XEXP (RTVEC_ELT (vec, j), 0) == old_label)
          {
            RTVEC_ELT (vec, j) = gen_rtx_LABEL_REF (Pmode, new_label);
            --LABEL_NUSES (old_label);
            ++LABEL_NUSES (new_label);
          }

      /* Handle casesi dispatch insns.  */
      if ((tmp = single_set (insn)) != NULL
          && SET_DEST (tmp) == pc_rtx
          && GET_CODE (SET_SRC (tmp)) == IF_THEN_ELSE
          && GET_CODE (XEXP (SET_SRC (tmp), 2)) == LABEL_REF
          && XEXP (XEXP (SET_SRC (tmp), 2), 0) == old_label)
        {
          XEXP (SET_SRC (tmp), 2) = gen_rtx_LABEL_REF (VOIDmode,
                                                       new_label);
          --LABEL_NUSES (old_label);
          ++LABEL_NUSES (new_label);
        }
    }
  else
    {
      /* ?? We may play the games with moving the named labels from
         one basic block to the other in case only one computed_jump is
         available.  */
      if (computed_jump_p (insn)
          /* A return instruction can't be redirected.  */
          || returnjump_p (insn))
        return NULL;

      /* If the insn doesn't go where we think, we're confused.  */
      gcc_assert (JUMP_LABEL (insn) == old_label);

      /* If the substitution doesn't succeed, die.  This can happen
         if the back end emitted unrecognizable instructions or if
         target is exit block on some arches.  */
      if (!redirect_jump (insn, block_label (target), 0))
        {
          gcc_assert (target == EXIT_BLOCK_PTR);
          return NULL;
        }
    }

  if (dump_file)
    fprintf (dump_file, "Edge %i->%i redirected to %i\n",
             e->src->index, e->dest->index, target->index);

  if (e->dest != target)
    e = redirect_edge_succ_nodup (e, target);
  return e;
}

/* Attempt to change code to redirect edge E to TARGET.  Don't do that on
   expense of adding new instructions or reordering basic blocks.

   Function can be also called with edge destination equivalent to the TARGET.
   Then it should try the simplifications and do nothing if none is possible.

   Return edge representing the branch if transformation succeeded.  Return NULL
   on failure.
   We still return NULL in case E already destinated TARGET and we didn't
   managed to simplify instruction stream.  */

static edge
rtl_redirect_edge_and_branch (edge e, basic_block target)
{
  edge ret;
  basic_block src = e->src;

  if (e->flags & (EDGE_ABNORMAL_CALL | EDGE_EH))
    return NULL;

  if (e->dest == target)
    return e;

  if ((ret = try_redirect_by_replacing_jump (e, target, false)) != NULL)
    {
      src->flags |= BB_DIRTY;
      return ret;
    }

  ret = redirect_branch_edge (e, target);
  if (!ret)
    return NULL;

  src->flags |= BB_DIRTY;
  return ret;
}

/* Like force_nonfallthru below, but additionally performs redirection
   Used by redirect_edge_and_branch_force.  */

static basic_block
force_nonfallthru_and_redirect (edge e, basic_block target)
{
  basic_block jump_block, new_bb = NULL, src = e->src;
  rtx note;
  edge new_edge;
  int abnormal_edge_flags = 0;

  /* In the case the last instruction is conditional jump to the next
     instruction, first redirect the jump itself and then continue
     by creating a basic block afterwards to redirect fallthru edge.  */
  if (e->src != ENTRY_BLOCK_PTR && e->dest != EXIT_BLOCK_PTR
      && any_condjump_p (BB_END (e->src))
      /* When called from cfglayout, fallthru edges do not
         necessarily go to the next block.  */
      && e->src->next_bb == e->dest
      && JUMP_LABEL (BB_END (e->src)) == BB_HEAD (e->dest))
    {
      rtx note;
      edge b = unchecked_make_edge (e->src, target, 0);
      bool redirected;

      redirected = redirect_jump (BB_END (e->src), block_label (target), 0);
      gcc_assert (redirected);
      
      note = find_reg_note (BB_END (e->src), REG_BR_PROB, NULL_RTX);
      if (note)
        {
          int prob = INTVAL (XEXP (note, 0));

          b->probability = prob;
          b->count = e->count * prob / REG_BR_PROB_BASE;
          e->probability -= e->probability;
          e->count -= b->count;
          if (e->probability < 0)
            e->probability = 0;
          if (e->count < 0)
            e->count = 0;
        }
    }

  if (e->flags & EDGE_ABNORMAL)
    {
      /* Irritating special case - fallthru edge to the same block as abnormal
         edge.
         We can't redirect abnormal edge, but we still can split the fallthru
         one and create separate abnormal edge to original destination.
         This allows bb-reorder to make such edge non-fallthru.  */
      gcc_assert (e->dest == target);
      abnormal_edge_flags = e->flags & ~(EDGE_FALLTHRU | EDGE_CAN_FALLTHRU);
      e->flags &= EDGE_FALLTHRU | EDGE_CAN_FALLTHRU;
    }
  else
    {
      gcc_assert (e->flags & EDGE_FALLTHRU);
      if (e->src == ENTRY_BLOCK_PTR)
        {
          /* We can't redirect the entry block.  Create an empty block
             at the start of the function which we use to add the new
             jump.  */
          edge tmp;
          edge_iterator ei;
          bool found = false;
          
          basic_block bb = create_basic_block (BB_HEAD (e->dest), NULL, ENTRY_BLOCK_PTR);
          
          /* Change the existing edge's source to be the new block, and add
             a new edge from the entry block to the new block.  */
          e->src = bb;
          for (ei = ei_start (ENTRY_BLOCK_PTR->succs); (tmp = ei_safe_edge (ei)); )
            {
              if (tmp == e)
                {
                  VEC_unordered_remove (edge, ENTRY_BLOCK_PTR->succs, ei.index);
                  found = true;
                  break;
                }
              else
                ei_next (&ei);
            }
          
          gcc_assert (found);
          
          VEC_safe_push (edge, bb->succs, e);
          make_single_succ_edge (ENTRY_BLOCK_PTR, bb, EDGE_FALLTHRU);
        }
    }

  if (EDGE_COUNT (e->src->succs) >= 2 || abnormal_edge_flags)
    {
      /* Create the new structures.  */

      /* If the old block ended with a tablejump, skip its table
         by searching forward from there.  Otherwise start searching
         forward from the last instruction of the old block.  */
      if (!tablejump_p (BB_END (e->src), NULL, &note))
        note = BB_END (e->src);

      /* Position the new block correctly relative to loop notes.  */
      note = last_loop_beg_note (note);
      note = NEXT_INSN (note);

      jump_block = create_basic_block (note, NULL, e->src);
      jump_block->count = e->count;
      jump_block->frequency = EDGE_FREQUENCY (e);
      jump_block->loop_depth = target->loop_depth;

      if (target->global_live_at_start)
        {
          jump_block->global_live_at_start
            = OBSTACK_ALLOC_REG_SET (&flow_obstack);
          jump_block->global_live_at_end
            = OBSTACK_ALLOC_REG_SET (&flow_obstack);
          COPY_REG_SET (jump_block->global_live_at_start,
                        target->global_live_at_start);
          COPY_REG_SET (jump_block->global_live_at_end,
                        target->global_live_at_start);
        }

      /* Make sure new block ends up in correct hot/cold section.  */

      BB_COPY_PARTITION (jump_block, e->src);
      if (flag_reorder_blocks_and_partition
          && targetm.have_named_sections)
        {
          if (BB_PARTITION (jump_block) == BB_COLD_PARTITION)
            {
              rtx bb_note, new_note;
              for (bb_note = BB_HEAD (jump_block); 
                   bb_note && bb_note != NEXT_INSN (BB_END (jump_block));
                   bb_note = NEXT_INSN (bb_note))
                if (NOTE_P (bb_note)
                    && NOTE_LINE_NUMBER (bb_note) == NOTE_INSN_BASIC_BLOCK)
                  break;
              new_note = emit_note_after (NOTE_INSN_UNLIKELY_EXECUTED_CODE,
                                          bb_note);
              NOTE_BASIC_BLOCK (new_note) = jump_block; 
            }
          if (JUMP_P (BB_END (jump_block))
              && !any_condjump_p (BB_END (jump_block))
              && (EDGE_SUCC (jump_block, 0)->flags & EDGE_CROSSING))
            REG_NOTES (BB_END (jump_block)) = gen_rtx_EXPR_LIST 
              (REG_CROSSING_JUMP, NULL_RTX, 
               REG_NOTES (BB_END (jump_block)));
        }

      /* Wire edge in.  */
      new_edge = make_edge (e->src, jump_block, EDGE_FALLTHRU);
      new_edge->probability = e->probability;
      new_edge->count = e->count;

      /* Redirect old edge.  */
      redirect_edge_pred (e, jump_block);
      e->probability = REG_BR_PROB_BASE;

      new_bb = jump_block;
    }
  else
    jump_block = e->src;

  e->flags &= ~EDGE_FALLTHRU;
  if (target == EXIT_BLOCK_PTR)
    {
#ifdef HAVE_return
        emit_jump_insn_after_noloc (gen_return (), BB_END (jump_block));
#else
        gcc_unreachable ();
#endif
    }
  else
    {
      rtx label = block_label (target);
      emit_jump_insn_after_noloc (gen_jump (label), BB_END (jump_block));
      JUMP_LABEL (BB_END (jump_block)) = label;
      LABEL_NUSES (label)++;
    }

  emit_barrier_after (BB_END (jump_block));
  redirect_edge_succ_nodup (e, target);

  if (abnormal_edge_flags)
    make_edge (src, target, abnormal_edge_flags);

  return new_bb;
}

/* Edge E is assumed to be fallthru edge.  Emit needed jump instruction
   (and possibly create new basic block) to make edge non-fallthru.
   Return newly created BB or NULL if none.  */

basic_block
force_nonfallthru (edge e)
{
  return force_nonfallthru_and_redirect (e, e->dest);
}

/* Redirect edge even at the expense of creating new jump insn or
   basic block.  Return new basic block if created, NULL otherwise.
   Abort if conversion is impossible.  */

static basic_block
rtl_redirect_edge_and_branch_force (edge e, basic_block target)
{
  if (redirect_edge_and_branch (e, target)
      || e->dest == target)
    return NULL;

  /* In case the edge redirection failed, try to force it to be non-fallthru
     and redirect newly created simplejump.  */
  return force_nonfallthru_and_redirect (e, target);
}

/* The given edge should potentially be a fallthru edge.  If that is in
   fact true, delete the jump and barriers that are in the way.  */

static void
rtl_tidy_fallthru_edge (edge e)
{
  rtx q;
  basic_block b = e->src, c = b->next_bb;
  edge e2;
  edge_iterator ei;

  FOR_EACH_EDGE (e2, ei, b->succs)
    if (e == e2)
      break;

  /* ??? In a late-running flow pass, other folks may have deleted basic
     blocks by nopping out blocks, leaving multiple BARRIERs between here
     and the target label. They ought to be chastized and fixed.

     We can also wind up with a sequence of undeletable labels between
     one block and the next.

     So search through a sequence of barriers, labels, and notes for
     the head of block C and assert that we really do fall through.  */

  for (q = NEXT_INSN (BB_END (b)); q != BB_HEAD (c); q = NEXT_INSN (q))
    if (INSN_P (q))
      return;

  /* Remove what will soon cease being the jump insn from the source block.
     If block B consisted only of this single jump, turn it into a deleted
     note.  */
  q = BB_END (b);
  if (JUMP_P (q)
      && onlyjump_p (q)
      && (any_uncondjump_p (q)
          || (EDGE_SUCC (b, 0) == e && ei.index == EDGE_COUNT (b->succs) - 1)))
    {
#ifdef HAVE_cc0
      /* If this was a conditional jump, we need to also delete
         the insn that set cc0.  */
      if (any_condjump_p (q) && only_sets_cc0_p (PREV_INSN (q)))
        q = PREV_INSN (q);
#endif

      q = PREV_INSN (q);

      /* We don't want a block to end on a line-number note since that has
         the potential of changing the code between -g and not -g.  */
      while (NOTE_P (q) && NOTE_LINE_NUMBER (q) >= 0)
        q = PREV_INSN (q);
    }

  /* Selectively unlink the sequence.  */
  if (q != PREV_INSN (BB_HEAD (c)))
    delete_insn_chain (NEXT_INSN (q), PREV_INSN (BB_HEAD (c)));

  e->flags |= EDGE_FALLTHRU;
}
\f
/* Helper function for split_edge.  Return true in case edge BB2 to BB1
   is back edge of syntactic loop.  */

static bool
back_edge_of_syntactic_loop_p (basic_block bb1, basic_block bb2)
{
  rtx insn;
  int count = 0;
  basic_block bb;

  if (bb1 == bb2)
    return true;

  /* ??? Could we guarantee that bb indices are monotone, so that we could
     just compare them?  */
  for (bb = bb1; bb && bb != bb2; bb = bb->next_bb)
    continue;

  if (!bb)
    return false;

  for (insn = BB_END (bb1); insn != BB_HEAD (bb2) && count >= 0;
       insn = NEXT_INSN (insn))
    if (NOTE_P (insn))
      {
        if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_BEG)
          count++;
        else if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_END)
          count--;
      }

  return count >= 0;
}

/* Should move basic block BB after basic block AFTER.  NIY.  */

static bool
rtl_move_block_after (basic_block bb ATTRIBUTE_UNUSED,
                      basic_block after ATTRIBUTE_UNUSED)
{
  return false;
}

/* Split a (typically critical) edge.  Return the new block.
   Abort on abnormal edges.

   ??? The code generally expects to be called on critical edges.
   The case of a block ending in an unconditional jump to a
   block with multiple predecessors is not handled optimally.  */

static basic_block
rtl_split_edge (edge edge_in)
{
  basic_block bb;
  rtx before;

  /* Abnormal edges cannot be split.  */
  gcc_assert (!(edge_in->flags & EDGE_ABNORMAL));

  /* We are going to place the new block in front of edge destination.
     Avoid existence of fallthru predecessors.  */
  if ((edge_in->flags & EDGE_FALLTHRU) == 0)
    {
      edge e;
      edge_iterator ei;

      FOR_EACH_EDGE (e, ei, edge_in->dest->preds)
        if (e->flags & EDGE_FALLTHRU)
          break;

      if (e)
        force_nonfallthru (e);
    }

  /* Create the basic block note.

     Where we place the note can have a noticeable impact on the generated
     code.  Consider this cfg:

                        E
                        |
                        0
                       / \
                   +->1-->2--->E
                   |  |
                   +--+

      If we need to insert an insn on the edge from block 0 to block 1,
      we want to ensure the instructions we insert are outside of any
      loop notes that physically sit between block 0 and block 1.  Otherwise
      we confuse the loop optimizer into thinking the loop is a phony.  */

  if (edge_in->dest != EXIT_BLOCK_PTR
      && PREV_INSN (BB_HEAD (edge_in->dest))
      && NOTE_P (PREV_INSN (BB_HEAD (edge_in->dest)))
      && (NOTE_LINE_NUMBER (PREV_INSN (BB_HEAD (edge_in->dest)))
          == NOTE_INSN_LOOP_BEG)
      && !back_edge_of_syntactic_loop_p (edge_in->dest, edge_in->src))
    before = PREV_INSN (BB_HEAD (edge_in->dest));
  else if (edge_in->dest != EXIT_BLOCK_PTR)
    before = BB_HEAD (edge_in->dest);
  else
    before = NULL_RTX;

  /* If this is a fall through edge to the exit block, the blocks might be
     not adjacent, and the right place is the after the source.  */
  if (edge_in->flags & EDGE_FALLTHRU && edge_in->dest == EXIT_BLOCK_PTR)
    {
      before = NEXT_INSN (BB_END (edge_in->src));
      if (before
          && NOTE_P (before)
          && NOTE_LINE_NUMBER (before) == NOTE_INSN_LOOP_END)
        before = NEXT_INSN (before);
      bb = create_basic_block (before, NULL, edge_in->src);
      BB_COPY_PARTITION (bb, edge_in->src);
    }
  else
    {
      bb = create_basic_block (before, NULL, edge_in->dest->prev_bb);
      /* ??? Why not edge_in->dest->prev_bb here?  */
      BB_COPY_PARTITION (bb, edge_in->dest);
    }

  /* ??? This info is likely going to be out of date very soon.  */
  if (edge_in->dest->global_live_at_start)
    {
      bb->global_live_at_start = OBSTACK_ALLOC_REG_SET (&flow_obstack);
      bb->global_live_at_end = OBSTACK_ALLOC_REG_SET (&flow_obstack);
      COPY_REG_SET (bb->global_live_at_start,
                    edge_in->dest->global_live_at_start);
      COPY_REG_SET (bb->global_live_at_end,
                    edge_in->dest->global_live_at_start);
    }

  make_single_succ_edge (bb, edge_in->dest, EDGE_FALLTHRU);

  /* For non-fallthru edges, we must adjust the predecessor's
     jump instruction to target our new block.  */
  if ((edge_in->flags & EDGE_FALLTHRU) == 0)
    {
      edge redirected = redirect_edge_and_branch (edge_in, bb);
      gcc_assert (redirected);
    }
  else
    redirect_edge_succ (edge_in, bb);

  return bb;
}

/* Queue instructions for insertion on an edge between two basic blocks.
   The new instructions and basic blocks (if any) will not appear in the
   CFG until commit_edge_insertions is called.  */

void
insert_insn_on_edge (rtx pattern, edge e)
{
  /* We cannot insert instructions on an abnormal critical edge.
     It will be easier to find the culprit if we die now.  */
  gcc_assert (!((e->flags & EDGE_ABNORMAL) && EDGE_CRITICAL_P (e)));

  if (e->insns.r == NULL_RTX)
    start_sequence ();
  else
    push_to_sequence (e->insns.r);

  emit_insn (pattern);

  e->insns.r = get_insns ();
  end_sequence ();
}

/* Called from safe_insert_insn_on_edge through note_stores, marks live
   registers that are killed by the store.  */
static void
mark_killed_regs (rtx reg, rtx set ATTRIBUTE_UNUSED, void *data)
{
  regset killed = data;
  int regno, i;

  if (GET_CODE (reg) == SUBREG)
    reg = SUBREG_REG (reg);
  if (!REG_P (reg))
    return;
  regno = REGNO (reg);
  if (regno >= FIRST_PSEUDO_REGISTER)
    SET_REGNO_REG_SET (killed, regno);
  else
    {
      for (i = 0; i < (int) hard_regno_nregs[regno][GET_MODE (reg)]; i++)
        SET_REGNO_REG_SET (killed, regno + i);
    }
}

/* Similar to insert_insn_on_edge, tries to put INSN to edge E.  Additionally
   it checks whether this will not clobber the registers that are live on the
   edge (i.e. it requires liveness information to be up-to-date) and if there
   are some, then it tries to save and restore them.  Returns true if
   successful.  */
bool
safe_insert_insn_on_edge (rtx insn, edge e)
{
  rtx x;
  regset_head killed_head;
  regset killed = INITIALIZE_REG_SET (killed_head);
  rtx save_regs = NULL_RTX;
  unsigned regno;
  int noccmode;
  enum machine_mode mode;
  reg_set_iterator rsi;

#ifdef AVOID_CCMODE_COPIES
  noccmode = true;
#else
  noccmode = false;
#endif

  for (x = insn; x; x = NEXT_INSN (x))
    if (INSN_P (x))
      note_stores (PATTERN (x), mark_killed_regs, killed);
  bitmap_and_into (killed, e->dest->global_live_at_start);

  EXECUTE_IF_SET_IN_REG_SET (killed, 0, regno, rsi)
    {
      mode = regno < FIRST_PSEUDO_REGISTER
              ? reg_raw_mode[regno]
              : GET_MODE (regno_reg_rtx[regno]);
      if (mode == VOIDmode)
        return false;

      if (noccmode && mode == CCmode)
        return false;
        
      save_regs = alloc_EXPR_LIST (0,
                                   alloc_EXPR_LIST (0,
                                                    gen_reg_rtx (mode),
                                                    gen_raw_REG (mode, regno)),
                                   save_regs);
    }

  if (save_regs)
    {
      rtx from, to;

      start_sequence ();
      for (x = save_regs; x; x = XEXP (x, 1))
        {
          from = XEXP (XEXP (x, 0), 1);
          to = XEXP (XEXP (x, 0), 0);
          emit_move_insn (to, from);
        }
      emit_insn (insn);
      for (x = save_regs; x; x = XEXP (x, 1))
        {
          from = XEXP (XEXP (x, 0), 0);
          to = XEXP (XEXP (x, 0), 1);
          emit_move_insn (to, from);
        }
      insn = get_insns ();
      end_sequence ();
      free_EXPR_LIST_list (&save_regs);
    }
  insert_insn_on_edge (insn, e);
  
  FREE_REG_SET (killed);
  return true;
}

/* Update the CFG for the instructions queued on edge E.  */

static void
commit_one_edge_insertion (edge e, int watch_calls)
{
  rtx before = NULL_RTX, after = NULL_RTX, insns, tmp, last;
  basic_block bb = NULL;

  /* Pull the insns off the edge now since the edge might go away.  */
  insns = e->insns.r;
  e->insns.r = NULL_RTX;

  /* Special case -- avoid inserting code between call and storing
     its return value.  */
  if (watch_calls && (e->flags & EDGE_FALLTHRU)
      && EDGE_COUNT (e->dest->preds) == 1
      && e->src != ENTRY_BLOCK_PTR
      && CALL_P (BB_END (e->src)))
    {
      rtx next = next_nonnote_insn (BB_END (e->src));

      after = BB_HEAD (e->dest);
      /* The first insn after the call may be a stack pop, skip it.  */
      while (next
             && keep_with_call_p (next))
        {
          after = next;
          next = next_nonnote_insn (next);
        }
      bb = e->dest;
    }
  if (!before && !after)
    {
      /* Figure out where to put these things.  If the destination has
         one predecessor, insert there.  Except for the exit block.  */
      if (EDGE_COUNT (e->dest->preds) == 1 && e->dest != EXIT_BLOCK_PTR)
        {
          bb = e->dest;

          /* Get the location correct wrt a code label, and "nice" wrt
             a basic block note, and before everything else.  */
          tmp = BB_HEAD (bb);
          if (LABEL_P (tmp))
            tmp = NEXT_INSN (tmp);
          if (NOTE_INSN_BASIC_BLOCK_P (tmp))
            tmp = NEXT_INSN (tmp);
          if (tmp 
              && NOTE_P (tmp)
              && NOTE_LINE_NUMBER (tmp) == NOTE_INSN_UNLIKELY_EXECUTED_CODE)
            tmp = NEXT_INSN (tmp);
          if (tmp == BB_HEAD (bb))
            before = tmp;
          else if (tmp)
            after = PREV_INSN (tmp);
          else
            after = get_last_insn ();
        }

      /* If the source has one successor and the edge is not abnormal,
         insert there.  Except for the entry block.  */
      else if ((e->flags & EDGE_ABNORMAL) == 0
               && EDGE_COUNT (e->src->succs) == 1
               && e->src != ENTRY_BLOCK_PTR)
        {
          bb = e->src;

          /* It is possible to have a non-simple jump here.  Consider a target
             where some forms of unconditional jumps clobber a register.  This
             happens on the fr30 for example.

             We know this block has a single successor, so we can just emit
             the queued insns before the jump.  */
          if (JUMP_P (BB_END (bb)))
            for (before = BB_END (bb);
                 NOTE_P (PREV_INSN (before))
                 && NOTE_LINE_NUMBER (PREV_INSN (before)) ==
                 NOTE_INSN_LOOP_BEG; before = PREV_INSN (before))
              ;
          else
            {
              /* We'd better be fallthru, or we've lost track of
                 what's what.  */
              gcc_assert (e->flags & EDGE_FALLTHRU);

              after = BB_END (bb);
            }
        }
      /* Otherwise we must split the edge.  */
      else
        {
          bb = split_edge (e);
          after = BB_END (bb);

          if (flag_reorder_blocks_and_partition
              && targetm.have_named_sections
              && e->src != ENTRY_BLOCK_PTR
              && BB_PARTITION (e->src) == BB_COLD_PARTITION
              && !(e->flags & EDGE_CROSSING))
            {
              rtx bb_note, new_note, cur_insn;

              bb_note = NULL_RTX;
              for (cur_insn = BB_HEAD (bb); cur_insn != NEXT_INSN (BB_END (bb));
                   cur_insn = NEXT_INSN (cur_insn))
                if (NOTE_P (cur_insn)
                    && NOTE_LINE_NUMBER (cur_insn) == NOTE_INSN_BASIC_BLOCK)
                  {
                    bb_note = cur_insn;
                    break;
                  }

              new_note = emit_note_after (NOTE_INSN_UNLIKELY_EXECUTED_CODE,
                                          bb_note);
              NOTE_BASIC_BLOCK (new_note) = bb;
              if (JUMP_P (BB_END (bb))
                  && !any_condjump_p (BB_END (bb))
                  && (EDGE_SUCC (bb, 0)->flags & EDGE_CROSSING))
                REG_NOTES (BB_END (bb)) = gen_rtx_EXPR_LIST 
                  (REG_CROSSING_JUMP, NULL_RTX, REG_NOTES (BB_END (bb)));
              if (after == bb_note)
                after = new_note;
            }
        }
    }

  /* Now that we've found the spot, do the insertion.  */

  if (before)
    {
      emit_insn_before_noloc (insns, before);
      last = prev_nonnote_insn (before);
    }
  else
    last = emit_insn_after_noloc (insns, after);

  if (returnjump_p (last))
    {
      /* ??? Remove all outgoing edges from BB and add one for EXIT.
         This is not currently a problem because this only happens
         for the (single) epilogue, which already has a fallthru edge
         to EXIT.  */

      e = EDGE_SUCC (bb, 0);
      gcc_assert (e->dest == EXIT_BLOCK_PTR
                  && EDGE_COUNT (bb->succs) == 1 && (e->flags & EDGE_FALLTHRU));

      e->flags &= ~EDGE_FALLTHRU;
      emit_barrier_after (last);

      if (before)
        delete_insn (before);
    }
  else
    gcc_assert (!JUMP_P (last));

  /* Mark the basic block for find_sub_basic_blocks.  */
  bb->aux = &bb->aux;
}

/* Update the CFG for all queued instructions.  */

void
commit_edge_insertions (void)
{
  basic_block bb;
  sbitmap blocks;
  bool changed = false;

#ifdef ENABLE_CHECKING
  verify_flow_info ();
#endif

  FOR_BB_BETWEEN (bb, ENTRY_BLOCK_PTR, EXIT_BLOCK_PTR, next_bb)
    {
      edge e;
      edge_iterator ei;

      FOR_EACH_EDGE (e, ei, bb->succs)
        if (e->insns.r)
          {
            changed = true;
            commit_one_edge_insertion (e, false);
          }
    }

  if (!changed)
    return;

  blocks = sbitmap_alloc (last_basic_block);
  sbitmap_zero (blocks);
  FOR_EACH_BB (bb)
    if (bb->aux)
      {
        SET_BIT (blocks, bb->index);
        /* Check for forgotten bb->aux values before commit_edge_insertions
           call.  */
        gcc_assert (bb->aux == &bb->aux);
        bb->aux = NULL;
      }
  find_many_sub_basic_blocks (blocks);
  sbitmap_free (blocks);
}
\f
/* Update the CFG for all queued instructions, taking special care of inserting
   code on edges between call and storing its return value.  */

void
commit_edge_insertions_watch_calls (void)
{
  basic_block bb;
  sbitmap blocks;
  bool changed = false;

#ifdef ENABLE_CHECKING
  verify_flow_info ();
#endif

  FOR_BB_BETWEEN (bb, ENTRY_BLOCK_PTR, EXIT_BLOCK_PTR, next_bb)
    {
      edge e;
      edge_iterator ei;

      FOR_EACH_EDGE (e, ei, bb->succs)
        if (e->insns.r)
          {
            changed = true;
            commit_one_edge_insertion (e, true);
          }
    }

  if (!changed)
    return;

  blocks = sbitmap_alloc (last_basic_block);
  sbitmap_zero (blocks);
  FOR_EACH_BB (bb)
    if (bb->aux)
      {
        SET_BIT (blocks, bb->index);
        /* Check for forgotten bb->aux values before commit_edge_insertions
           call.  */
        gcc_assert (bb->aux == &bb->aux);
        bb->aux = NULL;
      }
  find_many_sub_basic_blocks (blocks);
  sbitmap_free (blocks);
}
\f
/* Print out RTL-specific basic block information (live information
   at start and end).  */

static void
rtl_dump_bb (basic_block bb, FILE *outf, int indent)
{
  rtx insn;
  rtx last;
  char *s_indent;

  s_indent = alloca ((size_t) indent + 1);
  memset (s_indent, ' ', (size_t) indent);
  s_indent[indent] = '\0';

  fprintf (outf, ";;%s Registers live at start: ", s_indent);
  dump_regset (bb->global_live_at_start, outf);
  putc ('\n', outf);

  for (insn = BB_HEAD (bb), last = NEXT_INSN (BB_END (bb)); insn != last;
       insn = NEXT_INSN (insn))
    print_rtl_single (outf, insn);

  fprintf (outf, ";;%s Registers live at end: ", s_indent);
  dump_regset (bb->global_live_at_end, outf);
  putc ('\n', outf);
}
\f
/* Like print_rtl, but also print out live information for the start of each
   basic block.  */

void
print_rtl_with_bb (FILE *outf, rtx rtx_first)
{
  rtx tmp_rtx;

  if (rtx_first == 0)
    fprintf (outf, "(nil)\n");
  else
    {
      enum bb_state { NOT_IN_BB, IN_ONE_BB, IN_MULTIPLE_BB };
      int max_uid = get_max_uid ();
      basic_block *start = xcalloc (max_uid, sizeof (basic_block));
      basic_block *end = xcalloc (max_uid, sizeof (basic_block));
      enum bb_state *in_bb_p = xcalloc (max_uid, sizeof (enum bb_state));

      basic_block bb;

      FOR_EACH_BB_REVERSE (bb)
        {
          rtx x;

          start[INSN_UID (BB_HEAD (bb))] = bb;
          end[INSN_UID (BB_END (bb))] = bb;
          for (x = BB_HEAD (bb); x != NULL_RTX; x = NEXT_INSN (x))
            {
              enum bb_state state = IN_MULTIPLE_BB;

              if (in_bb_p[INSN_UID (x)] == NOT_IN_BB)
                state = IN_ONE_BB;
              in_bb_p[INSN_UID (x)] = state;

              if (x == BB_END (bb))
                break;
            }
        }

      for (tmp_rtx = rtx_first; NULL != tmp_rtx; tmp_rtx = NEXT_INSN (tmp_rtx))
        {
          int did_output;

          if ((bb = start[INSN_UID (tmp_rtx)]) != NULL)
            {
              fprintf (outf, ";; Start of basic block %d, registers live:",
                       bb->index);
              dump_regset (bb->global_live_at_start, outf);
              putc ('\n', outf);
            }

          if (in_bb_p[INSN_UID (tmp_rtx)] == NOT_IN_BB
              && !NOTE_P (tmp_rtx)
              && !BARRIER_P (tmp_rtx))
            fprintf (outf, ";; Insn is not within a basic block\n");
          else if (in_bb_p[INSN_UID (tmp_rtx)] == IN_MULTIPLE_BB)
            fprintf (outf, ";; Insn is in multiple basic blocks\n");

          did_output = print_rtl_single (outf, tmp_rtx);

          if ((bb = end[INSN_UID (tmp_rtx)]) != NULL)
            {
              fprintf (outf, ";; End of basic block %d, registers live:\n",
                       bb->index);
              dump_regset (bb->global_live_at_end, outf);
              putc ('\n', outf);
            }

          if (did_output)
            putc ('\n', outf);
        }

      free (start);
      free (end);
      free (in_bb_p);
    }

  if (current_function_epilogue_delay_list != 0)
    {
      fprintf (outf, "\n;; Insns in epilogue delay list:\n\n");
      for (tmp_rtx = current_function_epilogue_delay_list; tmp_rtx != 0;
           tmp_rtx = XEXP (tmp_rtx, 1))
        print_rtl_single (outf, XEXP (tmp_rtx, 0));
    }
}
\f
void
update_br_prob_note (basic_block bb)
{
  rtx note;
  if (!JUMP_P (BB_END (bb)))
    return;
  note = find_reg_note (BB_END (bb), REG_BR_PROB, NULL_RTX);
  if (!note || INTVAL (XEXP (note, 0)) == BRANCH_EDGE (bb)->probability)
    return;
  XEXP (note, 0) = GEN_INT (BRANCH_EDGE (bb)->probability);
}
\f
/* Verify the CFG and RTL consistency common for both underlying RTL and
   cfglayout RTL.

   Currently it does following checks:

   - test head/end pointers
   - overlapping of basic blocks
   - headers of basic blocks (the NOTE_INSN_BASIC_BLOCK note)
   - tails of basic blocks (ensure that boundary is necessary)
   - scans body of the basic block for JUMP_INSN, CODE_LABEL
     and NOTE_INSN_BASIC_BLOCK
   - verify that no fall_thru edge crosses hot/cold partition boundaries

   In future it can be extended check a lot of other stuff as well
   (reachability of basic blocks, life information, etc. etc.).  */

static int
rtl_verify_flow_info_1 (void)
{
  const int max_uid = get_max_uid ();
  rtx last_head = get_last_insn ();
  basic_block *bb_info;
  rtx x;
  int err = 0;
  basic_block bb, last_bb_seen;

  bb_info = xcalloc (max_uid, sizeof (basic_block));

  /* Check bb chain & numbers.  */
  last_bb_seen = ENTRY_BLOCK_PTR;

  FOR_EACH_BB_REVERSE (bb)
    {
      rtx head = BB_HEAD (bb);
      rtx end = BB_END (bb);

      /* Verify the end of the basic block is in the INSN chain.  */
      for (x = last_head; x != NULL_RTX; x = PREV_INSN (x))
        if (x == end)
          break;

      if (!x)
        {
          error ("end insn %d for block %d not found in the insn stream",
                 INSN_UID (end), bb->index);
          err = 1;
        }

      /* Work backwards from the end to the head of the basic block
         to verify the head is in the RTL chain.  */
      for (; x != NULL_RTX; x = PREV_INSN (x))
        {
          /* While walking over the insn chain, verify insns appear
             in only one basic block and initialize the BB_INFO array
             used by other passes.  */
          if (bb_info[INSN_UID (x)] != NULL)
            {
              error ("insn %d is in multiple basic blocks (%d and %d)",
                     INSN_UID (x), bb->index, bb_info[INSN_UID (x)]->index);
              err = 1;
            }

          bb_info[INSN_UID (x)] = bb;

          if (x == head)
            break;
        }
      if (!x)
        {
          error ("head insn %d for block %d not found in the insn stream",
                 INSN_UID (head), bb->index);
          err = 1;
        }

      last_head = x;
    }

  /* Now check the basic blocks (boundaries etc.) */
  FOR_EACH_BB_REVERSE (bb)
    {
      int n_fallthru = 0, n_eh = 0, n_call = 0, n_abnormal = 0, n_branch = 0;
      edge e, fallthru = NULL;
      rtx note;
      edge_iterator ei;

      if (INSN_P (BB_END (bb))
          && (note = find_reg_note (BB_END (bb), REG_BR_PROB, NULL_RTX))
          && EDGE_COUNT (bb->succs) >= 2
          && any_condjump_p (BB_END (bb)))
        {
          if (INTVAL (XEXP (note, 0)) != BRANCH_EDGE (bb)->probability
              && profile_status != PROFILE_ABSENT)
            {
              error ("verify_flow_info: REG_BR_PROB does not match cfg %wi %i",
                     INTVAL (XEXP (note, 0)), BRANCH_EDGE (bb)->probability);
              err = 1;
            }
        }
      FOR_EACH_EDGE (e, ei, bb->succs)
        {
          if (e->flags & EDGE_FALLTHRU)
            {
              n_fallthru++, fallthru = e;
              if ((e->flags & EDGE_CROSSING)
                  || (BB_PARTITION (e->src) != BB_PARTITION (e->dest)
                      && e->src != ENTRY_BLOCK_PTR
                      && e->dest != EXIT_BLOCK_PTR))
            { 
                  error ("Fallthru edge crosses section boundary (bb %i)",
                         e->src->index);
                  err = 1;
                }
            }

          if ((e->flags & ~(EDGE_DFS_BACK
                            | EDGE_CAN_FALLTHRU
                            | EDGE_IRREDUCIBLE_LOOP
                            | EDGE_LOOP_EXIT
                            | EDGE_CROSSING)) == 0)
            n_branch++;

          if (e->flags & EDGE_ABNORMAL_CALL)
            n_call++;

          if (e->flags & EDGE_EH)
            n_eh++;
          else if (e->flags & EDGE_ABNORMAL)
            n_abnormal++;
        }

      if (n_eh && GET_CODE (PATTERN (BB_END (bb))) != RESX
          && !find_reg_note (BB_END (bb), REG_EH_REGION, NULL_RTX))
        {
          error ("Missing REG_EH_REGION note in the end of bb %i", bb->index);
          err = 1;
        }
      if (n_branch
          && (!JUMP_P (BB_END (bb))
              || (n_branch > 1 && (any_uncondjump_p (BB_END (bb))
                                   || any_condjump_p (BB_END (bb))))))
        {
          error ("Too many outgoing branch edges from bb %i", bb->index);
          err = 1;
        }
      if (n_fallthru && any_uncondjump_p (BB_END (bb)))
        {
          error ("Fallthru edge after unconditional jump %i", bb->index);
          err = 1;
        }
      if (n_branch != 1 && any_uncondjump_p (BB_END (bb)))
        {
          error ("Wrong amount of branch edges after unconditional jump %i", bb->index);
          err = 1;
        }
      if (n_branch != 1 && any_condjump_p (BB_END (bb))
          && JUMP_LABEL (BB_END (bb)) != BB_HEAD (fallthru->dest))
        {
          error ("Wrong amount of branch edges after conditional jump %i", bb->index);
          err = 1;
        }
      if (n_call && !CALL_P (BB_END (bb)))
        {
          error ("Call edges for non-call insn in bb %i", bb->index);
          err = 1;
        }
      if (n_abnormal
          && (!CALL_P (BB_END (bb)) && n_call != n_abnormal)
          && (!JUMP_P (BB_END (bb))
              || any_condjump_p (BB_END (bb))
              || any_uncondjump_p (BB_END (bb))))
        {
          error ("Abnormal edges for no purpose in bb %i", bb->index);
          err = 1;
        }

      for (x = BB_HEAD (bb); x != NEXT_INSN (BB_END (bb)); x = NEXT_INSN (x))
        /* We may have a barrier inside a basic block before dead code
           elimination.  There is no BLOCK_FOR_INSN field in a barrier.  */
        if (!BARRIER_P (x) && BLOCK_FOR_INSN (x) != bb)
          {
            debug_rtx (x);
            if (! BLOCK_FOR_INSN (x))
              error
                ("insn %d inside basic block %d but block_for_insn is NULL",
                 INSN_UID (x), bb->index);
            else
              error
                ("insn %d inside basic block %d but block_for_insn is %i",
                 INSN_UID (x), bb->index, BLOCK_FOR_INSN (x)->index);

            err = 1;
          }

      /* OK pointers are correct.  Now check the header of basic
         block.  It ought to contain optional CODE_LABEL followed
         by NOTE_BASIC_BLOCK.  */
      x = BB_HEAD (bb);
      if (LABEL_P (x))
        {
          if (BB_END (bb) == x)
            {
              error ("NOTE_INSN_BASIC_BLOCK is missing for block %d",
                     bb->index);
              err = 1;
            }

          x = NEXT_INSN (x);
        }

      if (!NOTE_INSN_BASIC_BLOCK_P (x) || NOTE_BASIC_BLOCK (x) != bb)
        {
          error ("NOTE_INSN_BASIC_BLOCK is missing for block %d",
                 bb->index);
          err = 1;
        }

      if (BB_END (bb) == x)
        /* Do checks for empty blocks here.  */
        ;
      else
        for (x = NEXT_INSN (x); x; x = NEXT_INSN (x))
          {
            if (NOTE_INSN_BASIC_BLOCK_P (x))
              {
                error ("NOTE_INSN_BASIC_BLOCK %d in middle of basic block %d",
                       INSN_UID (x), bb->index);
                err = 1;
              }

            if (x == BB_END (bb))
              break;

            if (control_flow_insn_p (x))
              {
                error ("in basic block %d:", bb->index);
                fatal_insn ("flow control insn inside a basic block", x);
              }
          }
    }

  /* Clean up.  */
  free (bb_info);
  return err;
}

/* Verify the CFG and RTL consistency common for both underlying RTL and
   cfglayout RTL.

   Currently it does following checks:
   - all checks of rtl_verify_flow_info_1
   - check that all insns are in the basic blocks
     (except the switch handling code, barriers and notes)
   - check that all returns are followed by barriers
   - check that all fallthru edge points to the adjacent blocks.  */
static int
rtl_verify_flow_info (void)
{
  basic_block bb;
  int err = rtl_verify_flow_info_1 ();
  rtx x;
  int num_bb_notes;
  const rtx rtx_first = get_insns ();
  basic_block last_bb_seen = ENTRY_BLOCK_PTR, curr_bb = NULL;

  FOR_EACH_BB_REVERSE (bb)
    {
      edge e;
      edge_iterator ei;

      FOR_EACH_EDGE (e, ei, bb->succs)
        if (e->flags & EDGE_FALLTHRU)
          break;
      if (!e)
        {
          rtx insn;

          /* Ensure existence of barrier in BB with no fallthru edges.  */
          for (insn = BB_END (bb); !insn || !BARRIER_P (insn);
               insn = NEXT_INSN (insn))
            if (!insn
                || (NOTE_P (insn)
                    && NOTE_LINE_NUMBER (insn) == NOTE_INSN_BASIC_BLOCK))
                {
                  error ("missing barrier after block %i", bb->index);
                  err = 1;
                  break;
                }
        }
      else if (e->src != ENTRY_BLOCK_PTR
               && e->dest != EXIT_BLOCK_PTR)
        {
          rtx insn;

          if (e->src->next_bb != e->dest)
            {
              error
                ("verify_flow_info: Incorrect blocks for fallthru %i->%i",
                 e->src->index, e->dest->index);
              err = 1;
            }
          else
            for (insn = NEXT_INSN (BB_END (e->src)); insn != BB_HEAD (e->dest);
                 insn = NEXT_INSN (insn))
              if (BARRIER_P (insn)
#ifndef CASE_DROPS_THROUGH
                  || INSN_P (insn)
#else
                  || (INSN_P (insn) && ! JUMP_TABLE_DATA_P (insn))
#endif
                  )
                {
                  error ("verify_flow_info: Incorrect fallthru %i->%i",
                         e->src->index, e->dest->index);
                  fatal_insn ("wrong insn in the fallthru edge", insn);
                  err = 1;
                }
        }
    }

  num_bb_notes = 0;
  last_bb_seen = ENTRY_BLOCK_PTR;

  for (x = rtx_first; x; x = NEXT_INSN (x))
    {
      if (NOTE_INSN_BASIC_BLOCK_P (x))
        {
          bb = NOTE_BASIC_BLOCK (x);

          num_bb_notes++;
          if (bb != last_bb_seen->next_bb)
            internal_error ("basic blocks not laid down consecutively");

          curr_bb = last_bb_seen = bb;
        }

      if (!curr_bb)
        {
          switch (GET_CODE (x))
            {
            case BARRIER:
            case NOTE:
              break;

            case CODE_LABEL:
              /* An addr_vec is placed outside any basic block.  */
              if (NEXT_INSN (x)
                  && JUMP_P (NEXT_INSN (x))
                  && (GET_CODE (PATTERN (NEXT_INSN (x))) == ADDR_DIFF_VEC
                      || GET_CODE (PATTERN (NEXT_INSN (x))) == ADDR_VEC))
                x = NEXT_INSN (x);

              /* But in any case, non-deletable labels can appear anywhere.  */
              break;

            default:
              fatal_insn ("insn outside basic block", x);
            }
        }

      if (JUMP_P (x)
          && returnjump_p (x) && ! condjump_p (x)
          && ! (NEXT_INSN (x) && BARRIER_P (NEXT_INSN (x))))
            fatal_insn ("return not followed by barrier", x);
      if (curr_bb && x == BB_END (curr_bb))
        curr_bb = NULL;
    }

  if (num_bb_notes != n_basic_blocks)
    internal_error
      ("number of bb notes in insn chain (%d) != n_basic_blocks (%d)",
       num_bb_notes, n_basic_blocks);

   return err;
}
\f
/* Assume that the preceding pass has possibly eliminated jump instructions
   or converted the unconditional jumps.  Eliminate the edges from CFG.
   Return true if any edges are eliminated.  */

bool
purge_dead_edges (basic_block bb)
{
  edge e;
  rtx insn = BB_END (bb), note;
  bool purged = false;
  bool found;
  edge_iterator ei;

  /* If this instruction cannot trap, remove REG_EH_REGION notes.  */
  if (NONJUMP_INSN_P (insn)
      && (note = find_reg_note (insn, REG_EH_REGION, NULL)))
    {
      rtx eqnote;

      if (! may_trap_p (PATTERN (insn))
          || ((eqnote = find_reg_equal_equiv_note (insn))
              && ! may_trap_p (XEXP (eqnote, 0))))
        remove_note (insn, note);
    }

  /* Cleanup abnormal edges caused by exceptions or non-local gotos.  */
  for (ei = ei_start (bb->succs); (e = ei_safe_edge (ei)); )
    {
      if (e->flags & EDGE_EH)
        {
          if (can_throw_internal (BB_END (bb)))
            {
              ei_next (&ei);
              continue;
            }
        }
      else if (e->flags & EDGE_ABNORMAL_CALL)
        {
          if (CALL_P (BB_END (bb))
              && (! (note = find_reg_note (insn, REG_EH_REGION, NULL))
                  || INTVAL (XEXP (note, 0)) >= 0))
            {
              ei_next (&ei);
              continue;
            }
        }
      else
        {
          ei_next (&ei);
          continue;
        }

      remove_edge (e);
      bb->flags |= BB_DIRTY;
      purged = true;
    }

  if (JUMP_P (insn))
    {
      rtx note;
      edge b,f;
      edge_iterator ei;

      /* We do care only about conditional jumps and simplejumps.  */
      if (!any_condjump_p (insn)
          && !returnjump_p (insn)
          && !simplejump_p (insn))
        return purged;

      /* Branch probability/prediction notes are defined only for
         condjumps.  We've possibly turned condjump into simplejump.  */
      if (simplejump_p (insn))
        {
          note = find_reg_note (insn, REG_BR_PROB, NULL);
          if (note)
            remove_note (insn, note);
          while ((note = find_reg_note (insn, REG_BR_PRED, NULL)))
            remove_note (insn, note);
        }

      for (ei = ei_start (bb->succs); (e = ei_safe_edge (ei)); )
        {
          /* Avoid abnormal flags to leak from computed jumps turned
             into simplejumps.  */

          e->flags &= ~EDGE_ABNORMAL;

          /* See if this edge is one we should keep.  */
          if ((e->flags & EDGE_FALLTHRU) && any_condjump_p (insn))
            /* A conditional jump can fall through into the next
               block, so we should keep the edge.  */
            {
              ei_next (&ei);
              continue;
            }
          else if (e->dest != EXIT_BLOCK_PTR
                   && BB_HEAD (e->dest) == JUMP_LABEL (insn))
            /* If the destination block is the target of the jump,
               keep the edge.  */
            {
              ei_next (&ei);
              continue;
            }
          else if (e->dest == EXIT_BLOCK_PTR && returnjump_p (insn))
            /* If the destination block is the exit block, and this
               instruction is a return, then keep the edge.  */
            {
              ei_next (&ei);
              continue;
            }
          else if ((e->flags & EDGE_EH) && can_throw_internal (insn))
            /* Keep the edges that correspond to exceptions thrown by
               this instruction and rematerialize the EDGE_ABNORMAL
               flag we just cleared above.  */
            {
              e->flags |= EDGE_ABNORMAL;
              ei_next (&ei);
              continue;
            }

          /* We do not need this edge.  */
          bb->flags |= BB_DIRTY;
          purged = true;
          remove_edge (e);
        }

      if (EDGE_COUNT (bb->succs) == 0 || !purged)
        return purged;

      if (dump_file)
        fprintf (dump_file, "Purged edges from bb %i\n", bb->index);

      if (!optimize)
        return purged;

      /* Redistribute probabilities.  */
      if (EDGE_COUNT (bb->succs) == 1)
        {
          EDGE_SUCC (bb, 0)->probability = REG_BR_PROB_BASE;
          EDGE_SUCC (bb, 0)->count = bb->count;
        }
      else
        {
          note = find_reg_note (insn, REG_BR_PROB, NULL);
          if (!note)
            return purged;

          b = BRANCH_EDGE (bb);
          f = FALLTHRU_EDGE (bb);
          b->probability = INTVAL (XEXP (note, 0));
          f->probability = REG_BR_PROB_BASE - b->probability;
          b->count = bb->count * b->probability / REG_BR_PROB_BASE;
          f->count = bb->count * f->probability / REG_BR_PROB_BASE;
        }

      return purged;
    }
  else if (CALL_P (insn) && SIBLING_CALL_P (insn))
    {
      /* First, there should not be any EH or ABCALL edges resulting
         from non-local gotos and the like.  If there were, we shouldn't
         have created the sibcall in the first place.  Second, there
         should of course never have been a fallthru edge.  */
      gcc_assert (EDGE_COUNT (bb->succs) == 1);
      gcc_assert (EDGE_SUCC (bb, 0)->flags == (EDGE_SIBCALL | EDGE_ABNORMAL));

      return 0;
    }

  /* If we don't see a jump insn, we don't know exactly why the block would
     have been broken at this point.  Look for a simple, non-fallthru edge,
     as these are only created by conditional branches.  If we find such an
     edge we know that there used to be a jump here and can then safely
     remove all non-fallthru edges.  */
  found = false;
  FOR_EACH_EDGE (e, ei, bb->succs)
    if (! (e->flags & (EDGE_COMPLEX | EDGE_FALLTHRU)))
      {
        found = true;
        break;
      }

  if (!found)
    return purged;

  for (ei = ei_start (bb->succs); (e = ei_safe_edge (ei)); )
    {
      if (!(e->flags & EDGE_FALLTHRU))
        {
          bb->flags |= BB_DIRTY;
          remove_edge (e);
          purged = true;
        }
      else
        ei_next (&ei);
    }

  gcc_assert (EDGE_COUNT (bb->succs) == 1);

  EDGE_SUCC (bb, 0)->probability = REG_BR_PROB_BASE;
  EDGE_SUCC (bb, 0)->count = bb->count;

  if (dump_file)
    fprintf (dump_file, "Purged non-fallthru edges from bb %i\n",
             bb->index);
  return purged;
}

/* Search all basic blocks for potentially dead edges and purge them.  Return
   true if some edge has been eliminated.  */

bool
purge_all_dead_edges (int update_life_p)
{
  int purged = false;
  sbitmap blocks = 0;
  basic_block bb;

  if (update_life_p)
    {
      blocks = sbitmap_alloc (last_basic_block);
      sbitmap_zero (blocks);
    }

  FOR_EACH_BB (bb)
    {
      bool purged_here = purge_dead_edges (bb);

      purged |= purged_here;
      if (purged_here && update_life_p)
        SET_BIT (blocks, bb->index);
    }

  if (update_life_p && purged)
    update_life_info (blocks, UPDATE_LIFE_GLOBAL,
                      PROP_DEATH_NOTES | PROP_SCAN_DEAD_CODE
                      | PROP_KILL_DEAD_CODE);

  if (update_life_p)
    sbitmap_free (blocks);
  return purged;
}

/* Same as split_block but update cfg_layout structures.  */

static basic_block
cfg_layout_split_block (basic_block bb, void *insnp)
{
  rtx insn = insnp;
  basic_block new_bb = rtl_split_block (bb, insn);

  new_bb->rbi->footer = bb->rbi->footer;
  bb->rbi->footer = NULL;

  return new_bb;
}


/* Redirect Edge to DEST.  */
static edge
cfg_layout_redirect_edge_and_branch (edge e, basic_block dest)
{
  basic_block src = e->src;
  edge ret;

  if (e->flags & (EDGE_ABNORMAL_CALL | EDGE_EH))
    return NULL;

  if (e->dest == dest)
    return e;

  if (e->src != ENTRY_BLOCK_PTR
      && (ret = try_redirect_by_replacing_jump (e, dest, true)))
    {
      src->flags |= BB_DIRTY;
      return ret;
    }

  if (e->src == ENTRY_BLOCK_PTR
      && (e->flags & EDGE_FALLTHRU) && !(e->flags & EDGE_COMPLEX))
    {
      if (dump_file)
        fprintf (dump_file, "Redirecting entry edge from bb %i to %i\n",
                 e->src->index, dest->index);

      e->src->flags |= BB_DIRTY;
      redirect_edge_succ (e, dest);
      return e;
    }

  /* Redirect_edge_and_branch may decide to turn branch into fallthru edge
     in the case the basic block appears to be in sequence.  Avoid this
     transformation.  */

  if (e->flags & EDGE_FALLTHRU)
    {
      /* Redirect any branch edges unified with the fallthru one.  */
      if (JUMP_P (BB_END (src))
          && label_is_jump_target_p (BB_HEAD (e->dest),
                                     BB_END (src)))
        {
          edge redirected;
          
          if (dump_file)
            fprintf (dump_file, "Fallthru edge unified with branch "
                     "%i->%i redirected to %i\n",
                     e->src->index, e->dest->index, dest->index);
          e->flags &= ~EDGE_FALLTHRU;
          redirected = redirect_branch_edge (e, dest);
          gcc_assert (redirected);
          e->flags |= EDGE_FALLTHRU;
          e->src->flags |= BB_DIRTY;
          return e;
        }
      /* In case we are redirecting fallthru edge to the branch edge
         of conditional jump, remove it.  */
      if (EDGE_COUNT (src->succs) == 2)
        {
          bool found = false;
          unsigned ix = 0;
          edge tmp, s;
          edge_iterator ei;

          FOR_EACH_EDGE (tmp, ei, src->succs)
            if (e == tmp)
              {
                found = true;
                ix = ei.index;
                break;
              }

          gcc_assert (found);

          if (EDGE_COUNT (src->succs) > (ix + 1))
            s = EDGE_SUCC (src, ix + 1);
          else
            s = EDGE_SUCC (src, 0);

          if (s->dest == dest
              && any_condjump_p (BB_END (src))
              && onlyjump_p (BB_END (src)))
            delete_insn (BB_END (src));
        }
      ret = redirect_edge_succ_nodup (e, dest);
      if (dump_file)
        fprintf (dump_file, "Fallthru edge %i->%i redirected to %i\n",
                 e->src->index, e->dest->index, dest->index);
    }
  else
    ret = redirect_branch_edge (e, dest);

  /* We don't want simplejumps in the insn stream during cfglayout.  */
  gcc_assert (!simplejump_p (BB_END (src)));

  src->flags |= BB_DIRTY;
  return ret;
}

/* Simple wrapper as we always can redirect fallthru edges.  */
static basic_block
cfg_layout_redirect_edge_and_branch_force (edge e, basic_block dest)
{
  edge redirected = cfg_layout_redirect_edge_and_branch (e, dest);

  gcc_assert (redirected);
  return NULL;
}

/* Same as delete_basic_block but update cfg_layout structures.  */

static void
cfg_layout_delete_block (basic_block bb)
{
  rtx insn, next, prev = PREV_INSN (BB_HEAD (bb)), *to, remaints;

  if (bb->rbi->header)
    {
      next = BB_HEAD (bb);
      if (prev)
        NEXT_INSN (prev) = bb->rbi->header;
      else
        set_first_insn (bb->rbi->header);
      PREV_INSN (bb->rbi->header) = prev;
      insn = bb->rbi->header;
      while (NEXT_INSN (insn))
        insn = NEXT_INSN (insn);
      NEXT_INSN (insn) = next;
      PREV_INSN (next) = insn;
    }
  next = NEXT_INSN (BB_END (bb));
  if (bb->rbi->footer)
    {
      insn = bb->rbi->footer;
      while (insn)
        {
          if (BARRIER_P (insn))
            {
              if (PREV_INSN (insn))
                NEXT_INSN (PREV_INSN (insn)) = NEXT_INSN (insn);
              else
                bb->rbi->footer = NEXT_INSN (insn);
              if (NEXT_INSN (insn))
                PREV_INSN (NEXT_INSN (insn)) = PREV_INSN (insn);
            }
          if (LABEL_P (insn))
            break;
          insn = NEXT_INSN (insn);
        }
      if (bb->rbi->footer)
        {
          insn = BB_END (bb);
          NEXT_INSN (insn) = bb->rbi->footer;
          PREV_INSN (bb->rbi->footer) = insn;
          while (NEXT_INSN (insn))
            insn = NEXT_INSN (insn);
          NEXT_INSN (insn) = next;
          if (next)
            PREV_INSN (next) = insn;
          else
            set_last_insn (insn);
        }
    }
  if (bb->next_bb != EXIT_BLOCK_PTR)
    to = &bb->next_bb->rbi->header;
  else
    to = &cfg_layout_function_footer;
  rtl_delete_block (bb);

  if (prev)
    prev = NEXT_INSN (prev);
  else
    prev = get_insns ();
  if (next)
    next = PREV_INSN (next);
  else
    next = get_last_insn ();

  if (next && NEXT_INSN (next) != prev)
    {
      remaints = unlink_insn_chain (prev, next);
      insn = remaints;
      while (NEXT_INSN (insn))
        insn = NEXT_INSN (insn);
      NEXT_INSN (insn) = *to;
      if (*to)
        PREV_INSN (*to) = insn;
      *to = remaints;
    }
}

/* Return true when blocks A and B can be safely merged.  */
static bool
cfg_layout_can_merge_blocks_p (basic_block a, basic_block b)
{
  /* If we are partitioning hot/cold basic blocks, we don't want to
     mess up unconditional or indirect jumps that cross between hot
     and cold sections.

     Basic block partitioning may result in some jumps that appear to
     be optimizable (or blocks that appear to be mergeable), but which really 
     must be left untouched (they are required to make it safely across 
     partition boundaries).  See  the comments at the top of 
     bb-reorder.c:partition_hot_cold_basic_blocks for complete details.  */

  if (flag_reorder_blocks_and_partition
      && (find_reg_note (BB_END (a), REG_CROSSING_JUMP, NULL_RTX)
          || find_reg_note (BB_END (b), REG_CROSSING_JUMP, NULL_RTX)
          || BB_PARTITION (a) != BB_PARTITION (b)))
    return false;

  /* There must be exactly one edge in between the blocks.  */
  return (EDGE_COUNT (a->succs) == 1
          && EDGE_SUCC (a, 0)->dest == b
          && EDGE_COUNT (b->preds) == 1
          && a != b
          /* Must be simple edge.  */
          && !(EDGE_SUCC (a, 0)->flags & EDGE_COMPLEX)
          && a != ENTRY_BLOCK_PTR && b != EXIT_BLOCK_PTR
          /* If the jump insn has side effects,
             we can't kill the edge.  */
          && (!JUMP_P (BB_END (a))
              || (reload_completed
                  ? simplejump_p (BB_END (a)) : onlyjump_p (BB_END (a)))));
}

/* Merge block A and B, abort when it is not possible.  */
static void
cfg_layout_merge_blocks (basic_block a, basic_block b)
{
#ifdef ENABLE_CHECKING
  gcc_assert (cfg_layout_can_merge_blocks_p (a, b));
#endif

  /* If there was a CODE_LABEL beginning B, delete it.  */
  if (LABEL_P (BB_HEAD (b)))
    delete_insn (BB_HEAD (b));

  /* We should have fallthru edge in a, or we can do dummy redirection to get
     it cleaned up.  */
  if (JUMP_P (BB_END (a)))
    try_redirect_by_replacing_jump (EDGE_SUCC (a, 0), b, true);
  gcc_assert (!JUMP_P (BB_END (a)));

  /* Possible line number notes should appear in between.  */
  if (b->rbi->header)
    {
      rtx first = BB_END (a), last;

      last = emit_insn_after_noloc (b->rbi->header, BB_END (a));
      delete_insn_chain (NEXT_INSN (first), last);
      b->rbi->header = NULL;
    }

  /* In the case basic blocks are not adjacent, move them around.  */
  if (NEXT_INSN (BB_END (a)) != BB_HEAD (b))
    {
      rtx first = unlink_insn_chain (BB_HEAD (b), BB_END (b));

      emit_insn_after_noloc (first, BB_END (a));
      /* Skip possible DELETED_LABEL insn.  */
      if (!NOTE_INSN_BASIC_BLOCK_P (first))
        first = NEXT_INSN (first);
      gcc_assert (NOTE_INSN_BASIC_BLOCK_P (first));
      BB_HEAD (b) = NULL;
      delete_insn (first);
    }
  /* Otherwise just re-associate the instructions.  */
  else
    {
      rtx insn;

      for (insn = BB_HEAD (b);
           insn != NEXT_INSN (BB_END (b));
           insn = NEXT_INSN (insn))
        set_block_for_insn (insn, a);
      insn = BB_HEAD (b);
      /* Skip possible DELETED_LABEL insn.  */
      if (!NOTE_INSN_BASIC_BLOCK_P (insn))
        insn = NEXT_INSN (insn);
      gcc_assert (NOTE_INSN_BASIC_BLOCK_P (insn));
      BB_HEAD (b) = NULL;
      BB_END (a) = BB_END (b);
      delete_insn (insn);
    }

  /* Possible tablejumps and barriers should appear after the block.  */
  if (b->rbi->footer)
    {
      if (!a->rbi->footer)
        a->rbi->footer = b->rbi->footer;
      else
        {
          rtx last = a->rbi->footer;

          while (NEXT_INSN (last))
            last = NEXT_INSN (last);
          NEXT_INSN (last) = b->rbi->footer;
          PREV_INSN (b->rbi->footer) = last;
        }
      b->rbi->footer = NULL;
    }

  if (dump_file)
    fprintf (dump_file, "Merged blocks %d and %d.\n",
             a->index, b->index);
}

/* Split edge E.  */

static basic_block
cfg_layout_split_edge (edge e)
{
  edge new_e;
  basic_block new_bb =
    create_basic_block (e->src != ENTRY_BLOCK_PTR
                        ? NEXT_INSN (BB_END (e->src)) : get_insns (),
                        NULL_RTX, e->src);

  /* ??? This info is likely going to be out of date very soon, but we must
     create it to avoid getting an ICE later.  */
  if (e->dest->global_live_at_start)
    {
      new_bb->global_live_at_start = OBSTACK_ALLOC_REG_SET (&flow_obstack);
      new_bb->global_live_at_end = OBSTACK_ALLOC_REG_SET (&flow_obstack);
      COPY_REG_SET (new_bb->global_live_at_start,
                    e->dest->global_live_at_start);
      COPY_REG_SET (new_bb->global_live_at_end,
                    e->dest->global_live_at_start);
    }

  new_e = make_edge (new_bb, e->dest, EDGE_FALLTHRU);
  redirect_edge_and_branch_force (e, new_bb);

  return new_bb;
}

/* Do postprocessing after making a forwarder block joined by edge FALLTHRU.  */

static void
rtl_make_forwarder_block (edge fallthru ATTRIBUTE_UNUSED)
{
}

/* Return 1 if BB ends with a call, possibly followed by some
   instructions that must stay with the call, 0 otherwise.  */

static bool
rtl_block_ends_with_call_p (basic_block bb)
{
  rtx insn = BB_END (bb);

  while (!CALL_P (insn)
         && insn != BB_HEAD (bb)
         && keep_with_call_p (insn))
    insn = PREV_INSN (insn);
  return (CALL_P (insn));
}

/* Return 1 if BB ends with a conditional branch, 0 otherwise.  */

static bool
rtl_block_ends_with_condjump_p (basic_block bb)
{
  return any_condjump_p (BB_END (bb));
}

/* Return true if we need to add fake edge to exit.
   Helper function for rtl_flow_call_edges_add.  */

static bool
need_fake_edge_p (rtx insn)
{
  if (!INSN_P (insn))
    return false;

  if ((CALL_P (insn)
       && !SIBLING_CALL_P (insn)
       && !find_reg_note (insn, REG_NORETURN, NULL)
       && !find_reg_note (insn, REG_ALWAYS_RETURN, NULL)
       && !CONST_OR_PURE_CALL_P (insn)))
    return true;

  return ((GET_CODE (PATTERN (insn)) == ASM_OPERANDS
           && MEM_VOLATILE_P (PATTERN (insn)))
          || (GET_CODE (PATTERN (insn)) == PARALLEL
              && asm_noperands (insn) != -1
              && MEM_VOLATILE_P (XVECEXP (PATTERN (insn), 0, 0)))
          || GET_CODE (PATTERN (insn)) == ASM_INPUT);
}

/* Add fake edges to the function exit for any non constant and non noreturn
   calls, volatile inline assembly in the bitmap of blocks specified by
   BLOCKS or to the whole CFG if BLOCKS is zero.  Return the number of blocks
   that were split.

   The goal is to expose cases in which entering a basic block does not imply
   that all subsequent instructions must be executed.  */

static int
rtl_flow_call_edges_add (sbitmap blocks)
{
  int i;
  int blocks_split = 0;
  int last_bb = last_basic_block;
  bool check_last_block = false;

  if (n_basic_blocks == 0)
    return 0;

  if (! blocks)
    check_last_block = true;
  else
    check_last_block = TEST_BIT (blocks, EXIT_BLOCK_PTR->prev_bb->index);

  /* In the last basic block, before epilogue generation, there will be
     a fallthru edge to EXIT.  Special care is required if the last insn
     of the last basic block is a call because make_edge folds duplicate
     edges, which would result in the fallthru edge also being marked
     fake, which would result in the fallthru edge being removed by
     remove_fake_edges, which would result in an invalid CFG.

     Moreover, we can't elide the outgoing fake edge, since the block
     profiler needs to take this into account in order to solve the minimal
     spanning tree in the case that the call doesn't return.

     Handle this by adding a dummy instruction in a new last basic block.  */
  if (check_last_block)
    {
      basic_block bb = EXIT_BLOCK_PTR->prev_bb;
      rtx insn = BB_END (bb);

      /* Back up past insns that must be kept in the same block as a call.  */
      while (insn != BB_HEAD (bb)
             && keep_with_call_p (insn))
        insn = PREV_INSN (insn);

      if (need_fake_edge_p (insn))
        {
          edge e;
          edge_iterator ei;

          FOR_EACH_EDGE (e, ei, bb->succs)
            if (e->dest == EXIT_BLOCK_PTR)
              {
                insert_insn_on_edge (gen_rtx_USE (VOIDmode, const0_rtx), e);
                commit_edge_insertions ();
                break;
              }
        }
    }

  /* Now add fake edges to the function exit for any non constant
     calls since there is no way that we can determine if they will
     return or not...  */

  for (i = 0; i < last_bb; i++)
    {
      basic_block bb = BASIC_BLOCK (i);
      rtx insn;
      rtx prev_insn;

      if (!bb)
        continue;

      if (blocks && !TEST_BIT (blocks, i))
        continue;

      for (insn = BB_END (bb); ; insn = prev_insn)
        {
          prev_insn = PREV_INSN (insn);
          if (need_fake_edge_p (insn))
            {
              edge e;
              rtx split_at_insn = insn;

              /* Don't split the block between a call and an insn that should
                 remain in the same block as the call.  */
              if (CALL_P (insn))
                while (split_at_insn != BB_END (bb)
                       && keep_with_call_p (NEXT_INSN (split_at_insn)))
                  split_at_insn = NEXT_INSN (split_at_insn);

              /* The handling above of the final block before the epilogue
                 should be enough to verify that there is no edge to the exit
                 block in CFG already.  Calling make_edge in such case would
                 cause us to mark that edge as fake and remove it later.  */

#ifdef ENABLE_CHECKING
              if (split_at_insn == BB_END (bb))
                {
                  edge_iterator ei;
                  FOR_EACH_EDGE (e, ei, bb->succs)
                    gcc_assert (e->dest != EXIT_BLOCK_PTR);
                }
#endif

              /* Note that the following may create a new basic block
                 and renumber the existing basic blocks.  */
              if (split_at_insn != BB_END (bb))
                {
                  e = split_block (bb, split_at_insn);
                  if (e)
                    blocks_split++;
                }

              make_edge (bb, EXIT_BLOCK_PTR, EDGE_FAKE);
            }

          if (insn == BB_HEAD (bb))
            break;
        }
    }

  if (blocks_split)
    verify_flow_info ();

  return blocks_split;
}

/* Implementation of CFG manipulation for linearized RTL.  */
struct cfg_hooks rtl_cfg_hooks = {
  "rtl",
  rtl_verify_flow_info,
  rtl_dump_bb,
  rtl_create_basic_block,
  rtl_redirect_edge_and_branch,
  rtl_redirect_edge_and_branch_force,
  rtl_delete_block,
  rtl_split_block,
  rtl_move_block_after,
  rtl_can_merge_blocks,  /* can_merge_blocks_p */
  rtl_merge_blocks,
  rtl_predict_edge,
  rtl_predicted_by_p,
  NULL, /* can_duplicate_block_p */
  NULL, /* duplicate_block */
  rtl_split_edge,
  rtl_make_forwarder_block,
  rtl_tidy_fallthru_edge,
  rtl_block_ends_with_call_p,
  rtl_block_ends_with_condjump_p,
  rtl_flow_call_edges_add
};

/* Implementation of CFG manipulation for cfg layout RTL, where
   basic block connected via fallthru edges does not have to be adjacent.
   This representation will hopefully become the default one in future
   version of the compiler.  */

/* We do not want to declare these functions in a header file, since they
   should only be used through the cfghooks interface, and we do not want to
   move them here since it would require also moving quite a lot of related
   code.  */
extern bool cfg_layout_can_duplicate_bb_p (basic_block);
extern basic_block cfg_layout_duplicate_bb (basic_block);

struct cfg_hooks cfg_layout_rtl_cfg_hooks = {
  "cfglayout mode",
  rtl_verify_flow_info_1,
  rtl_dump_bb,
  cfg_layout_create_basic_block,
  cfg_layout_redirect_edge_and_branch,
  cfg_layout_redirect_edge_and_branch_force,
  cfg_layout_delete_block,
  cfg_layout_split_block,
  rtl_move_block_after,
  cfg_layout_can_merge_blocks_p,
  cfg_layout_merge_blocks,
  rtl_predict_edge,
  rtl_predicted_by_p,
  cfg_layout_can_duplicate_bb_p,
  cfg_layout_duplicate_bb,
  cfg_layout_split_edge,
  rtl_make_forwarder_block,
  NULL,
  rtl_block_ends_with_call_p,
  rtl_block_ends_with_condjump_p,
  rtl_flow_call_edges_add
};